Matchbox Educable Noughts and Crosses Engine

The Matchbox Educable Noughts and Crosses Engine (sometimes called the Machine Educable Noughts and Crosses Engine or MENACE) was a mechanical computer made from 304 matchboxes designed and built by artificial intelligence researcher Donald Michie and his colleague Roger Chambers, in 1961. It was designed to play human opponents in games of noughts and crosses (tic-tac-toe) by returning a move for any given state of play and to refine its strategy through reinforcement learning. This was one of the first types of artificial intelligence. Michie and Chambers did not have immediate access to a computer; they worked around this by building the engine out of matchboxes. The matchboxes they used each represented a single possible layout of a noughts and crosses grid. When the computer first played, it would randomly choose moves based on the current layout. As it played more games, through a reinforcement loop, it disqualified strategies that led to losing games, and supplemented strategies that led to winning games. Michie held a tournament against MENACE in 1961, wherein he experimented with different openings. Following MENACE's maiden tournament against Michie, it demonstrated successful artificial intelligence in its strategy. Michie's essays on MENACE's weight initialisation and the BOXES algorithm used by MENACE became popular in the field of computer science research. Michie was honoured for his contribution to machine learning research, and was twice commissioned to program a MENACE simulation on an actual computer. == Origin == Donald Michie (1923–2007) had been on the team decrypting the German Tunny Code during World War II. Fifteen years later, he wanted to further display his mathematical and computational prowess with an early convolutional neural network. Since computer equipment was not obtainable for such uses, and Michie did not have a computer readily available, he decided to display and demonstrate artificial intelligence in a more esoteric format and constructed a functional mechanical computer out of matchboxes and beads. MENACE was constructed as the result of a bet with a computer science colleague who postulated that such a machine was impossible. Michie undertook the task of collecting and defining each matchbox as a "fun project", later turned into a demonstration tool. Michie completed his essay on MENACE in 1963, "Experiments on the mechanization of game-learning", as well as his essay on the BOXES Algorithm, written with R. A. Chambers and had built up an AI research unit in Hope Park Square, Edinburgh, Scotland. MENACE learned by playing successive matches of noughts and crosses. Each time, it would eliminate a losing strategy by the human player confiscating the beads that corresponded to each move. It reinforced winning strategies by making the moves more likely, by supplying extra beads. This was one of the earliest versions of the Reinforcement Loop, the schematic algorithm of looping the algorithm, dropping unsuccessful strategies until only the winning ones remain. This model starts as completely random, and gradually learns. == Composition == MENACE was made from 304 matchboxes glued together in an arrangement similar to a chest of drawers. Each box had a code number, which was keyed into a chart. This chart had drawings of tic-tac-toe game grids with various configurations of X, O, and empty squares, corresponding to all possible permutations a game could go through as it progressed. After removing duplicate arrangements (ones that were simply rotations or mirror images of other configurations), MENACE used 304 permutations in its chart and thus that many matchboxes. Each individual matchbox tray contained a collection of coloured beads. Each colour represented a move on a square on the game grid, and so matchboxes with arrangements where positions on the grid were already taken would not have beads for that position. Additionally, at the front of the tray were two extra pieces of card in a "V" shape, the point of the "V" pointing at the front of the matchbox. Michie and his artificial intelligence team called MENACE's algorithm "Boxes", after the apparatus used for the machine. The first stage "Boxes" operated in five phases, each setting a definition and a precedent for the rules of the algorithm in relation to the game. == Operation == MENACE played first, as O, since all matchboxes represented permutations only relevant to the "X" player. To retrieve MENACE's choice of move, the opponent or operator located the matchbox that matched the current game state, or a rotation or mirror image of it. For example, at the start of a game, this would be the matchbox for an empty grid. The tray would be removed and lightly shaken so as to move the beads around. Then, the bead that had rolled into the point of the "V" shape at the front of the tray was the move MENACE had chosen to make. Its colour was then used as the position to play on, and, after accounting for any rotations or flips needed based on the chosen matchbox configuration's relation to the current grid, the O would be placed on that square. Then the player performed their move, the new state was located, a new move selected, and so on, until the game was finished. When the game had finished, the human player observed the game's outcome. As a game was played, each matchbox that was used for MENACE's turn had its tray returned to it ajar, and the bead used kept aside, so that MENACE's choice of moves and the game states they belonged to were recorded. Michie described his reinforcement system with "reward" and "punishment". Once the game was finished, if MENACE had won, it would then receive a "reward" for its victory. The removed beads showed the sequence of the winning moves. These were returned to their respective trays, easily identifiable since they were slightly open, as well as three bonus beads of the same colour. In this way, in future games MENACE would become more likely to repeat those winning moves, reinforcing winning strategies. If it lost, the removed beads were not returned, "punishing" MENACE, and meaning that in future it would be less likely, and eventually incapable if that colour of bead became absent, to repeat the moves that cause a loss. If the game was a draw, one additional bead was added to each box. == Results in practice == === Optimal strategy === Noughts and crosses has a well-known optimal strategy. A player must place their symbol in a way that blocks the other player from achieving any rows while simultaneously making a row themself. However, if both players use this strategy, the game always ends in a draw. If the human player is familiar with the optimal strategy, and MENACE can quickly learn it, then the games will eventually only end in draws. The likelihood of the computer winning increases quickly when the computer plays against a random-playing opponent. When playing against a player using optimal strategy, the odds of a draw grow to 100%. In Donald Michie's official tournament against MENACE in 1961 he used optimal strategy, and he and the computer began to draw consistently after twenty games. Michie's tournament had the following milestones: Michie began by consistently opening with "Variant 0", the middle square. At 15 games, MENACE abandoned all non-corner openings. At just over 20, Michie switched to consistently using "Variant 1", the bottom-right square. At 60, he returned to Variant 0. As he neared 80 games, he moved to "Variant 2", the top-middle. At 110, he switched to "Variant 3", the top right. At 135, he switched to "Variant 4", middle-right. At 190, he returned to Variant 1, and at 210, he returned to Variant 0. The trend in changes of beads in the "2" boxes runs: === Correlation === Depending on the strategy employed by the human player, MENACE produces a different trend on scatter graphs of wins. Using a random turn from the human player results in an almost-perfect positive trend. Playing the optimal strategy returns a slightly slower increase. The reinforcement does not create a perfect standard of wins; the algorithm will draw random uncertain conclusions each time. After the j-th round, the correlation of near-perfect play runs: 1 − D D − D ( j + 2 ) ∑ i = 0 j D ( j i + 1 ) V i {\displaystyle {1-D \over D-D^{(j+2)}}\sum _{i=0}^{j}D^{(ji+1)}V_{i}} Where Vi is the outcome (+1 is win, 0 is draw and -1 is loss) and D is the decay factor (average of past values of wins and losses). Below, Mn is the multiplier for the n-th round of the game. == Legacy == Donald Michie's MENACE proved that a computer could learn from failure and success to become good at a task. It used what would become core principles within the field of machine learning before they had been properly theorised. For example, the combination of how MENACE starts with equal numbers of types of beads in each matchbox, and how these are then selected at random, creates a learning behaviour similar to weight initialisation

Anthrobotics

Anthrobotics is the science of developing and studying robots that are either entirely or in some way human-like. The term anthrobotics was originally coined by Mark Rosheim in a paper entitled "Design of An Omnidirectional Arm" presented at the IEEE International Conference on Robotics and Automation, May 13–18, 1990, pp. 2162–2167. Rosheim says he derived the term from "...Anthropomorphic and Robotics to distinguish the new generation of dexterous robots from its simple industrial robot forebears." The word gained wider recognition as a result of its use in the title of Rosheim's subsequent book Robot Evolution: The Development of Anthrobotics, which focussed on facsimiles of human physical and psychological skills and attributes. However, a wider definition of the term anthrobotics has been proposed, in which the meaning is derived from anthropology rather than anthropomorphic. This usage includes robots that respond to input in a human-like fashion, rather than simply mimicking human actions, thus theoretically being able to respond more flexibly or to adapt to unforeseen circumstances. This expanded definition also encompasses robots that are situated in social environments with the ability to respond to those environments appropriately, such as insect robots, robotic pets, and the like. Anthrobotics is now taught at some universities, encouraging students not only to design and build robots for environments beyond current industrial applications, but also to speculate on the future of robotics that are embedded in the world at large, as mobile phones and computers are today. In 2016 philosopher Luis de Miranda created the Anthrobotics Cluster at the University of Edinburgh "a platform of cross-disciplinary research that seeks to investigate some of the biggest questions that will need to be answered" on the relationship between humans, robots and intelligent systems and "a think tank on the social spread of robotics, and also how automation is part of the definition of what humans have always been". to explore the symbiotic relationship between humans and automated protocols.

Resel

In image analysis, a resel (from resolution element) represents the actual spatial resolution in an image or a volumetric dataset. The number of resels in the image may be lower or equal to the number of pixel/voxels in the image. In an actual image the resels can vary across the image and indeed the local resolution can be expressed as "resels per pixel" (or "resels per voxel"). In functional neuroimaging analysis, an estimate of the number of resels together with random field theory is used in statistical inference. Keith Worsley has proposed an estimate for the number of resels/roughness. The word "resel" is related to the words "pixel", "texel", and "voxel". Waldo R. Tobler is probably among the first to use the word.

JasPer

JasPer is a computer software project to create a reference implementation of the codec specified in the JPEG-2000 Part-1 standard (i.e. ISO/IEC 15444-1) - started in 1997 at Image Power Inc. and at the University of British Columbia. It consists of a C library and some sample applications useful for testing the codec. The copyright owner began licensing the code to the public under an MIT License-style license in 2004 in response to requests from the open-source community. As of 2011 JasPer operated as a component of many software projects, both free and proprietary, including (but not limited to) netpbm (as of release 10.12), ImageMagick and KDE (as of version 3.2). As of 22 June 2010 the GEGL graphics library supported JasPer in its latest Git versions. In a series of objective JPEG-2000-compression quality tests conducted in 2004, "JasPer was the best codec, closely followed by IrfanView and Kakadu". However, Jasper remains one of the slowest implementations of the JPEG-2000 codec, as it was designed for reference, not performance. == Etymology == The name "JasPer" has simultaneous connotations with Canada's Jasper National Park, with the semi-precious gemstone, jasper, and with "JP" as an abbreviation of the JPEG-2000 standard.

Autonomous things

Autonomous things, abbreviated AuT, or the Internet of autonomous things, abbreviated as IoAT, is an emerging term for the technological developments that are expected to bring computers into the physical environment as autonomous entities without human direction, freely moving and interacting with humans and other objects. Self-navigating drones are the first AuT technology in (limited) deployment. It is expected that the first mass-deployment of AuT technologies will be the autonomous car, generally expected to be available around 2020. Other currently expected AuT technologies include home robotics (e.g., machines that provide care for the elderly, infirm or young), and military robots (air, land or sea autonomous machines with information-collection or target-attack capabilities). AuT technologies share many common traits, which justify the common notation. They are all based on recent breakthroughs in the domains of (deep) machine learning and artificial intelligence. They all require extensive and prompt regulatory developments to specify the requirements from them and to license and manage their deployment (see the further reading below). And they all require unprecedented levels of safety (e.g., automobile safety) and security, to overcome concerns about the potential negative impact of the new technology. As an example, the autonomous car both addresses the main existing safety issues and creates new issues. It is expected to be much safer than existing vehicles, by eliminating the single most dangerous element – the driver. The US's National Highway Traffic Safety Administration estimates 94 percent of US accidents were the result of human error and poor decision-making, including speeding and impaired driving, and the Center for Internet and Society at Stanford Law School claims that "Some ninety percent of motor vehicle crashes are caused at least in part by human error". So while safety standards like the ISO 26262 specify the required safety, there is still a burden on the industry to demonstrate acceptable safety. While car accidents claim every year 35,000 lives in the US, and 1.25 million worldwide, some believe that even "a car that's 10 times as safe, which means 3,500 people die on the roads each year [in the US alone]" would not be accepted by the public. The acceptable level may be closer to the current figures on aviation accidents and incidents, with under a thousand worldwide deaths in most years – three orders of magnitude lower than cars. This underscores the unprecedented nature of the safety requirements that will need to be met for cars, with similar levels of safety expected for other Autonomous Things.

Texture filtering

In computer graphics, texture filtering or texture smoothing is the method used to determine the texture color for a texture mapped pixel, using the colors of nearby texels (ie. pixels of the texture). Filtering describes how a texture is applied at many different shapes, size, angles and scales. Depending on the chosen filter algorithm, the result will show varying degrees of blurriness, detail, spatial aliasing, temporal aliasing and blocking. Depending on the circumstances, filtering can be performed in software (such as a software rendering package) or in hardware, eg. with either real time or GPU accelerated rendering circuits, or in a mixture of both. For most common interactive graphical applications, modern texture filtering is performed by dedicated hardware which optimizes memory access through memory cacheing and pre-fetch, and implements a selection of algorithms available to the user and developer. There are two main categories of texture filtering: magnification filtering and minification filtering. Depending on the situation, texture filtering is either a type of reconstruction filter where sparse data is interpolated to fill gaps (magnification), or a type of anti-aliasing (AA) where texture samples exist at a higher frequency than required for the sample frequency needed for texture fill (minification). There are many methods of texture filtering, which make different trade-offs between computational complexity, memory bandwidth and image quality. == The need for filtering == During the texture mapping process for any arbitrary 3D surface, a texture lookup takes place to find out where on the texture each pixel center falls. For texture-mapped polygonal surfaces composed of triangles typical of most surfaces in 3D games and movies, every pixel (or subordinate pixel sample) of that surface will be associated with some triangle(s) and a set of barycentric coordinates, which are used to provide a position within a texture. Such a position may not lie perfectly on the "pixel grid," necessitating some function to account for these cases. In other words, since the textured surface may be at an arbitrary distance and orientation relative to the viewer, one pixel does not usually correspond directly to one texel. Some form of filtering has to be applied to determine the best color for the pixel. Insufficient or incorrect filtering will show up in the image as artifacts (errors in the image), such as 'blockiness', jaggies, or shimmering. There can be different types of correspondence between a pixel and the texel/texels it represents on the screen. These depend on the position of the textured surface relative to the viewer, and different forms of filtering are needed in each case. Given a square texture mapped on to a square surface in the world, at some viewing distance the size of one screen pixel is exactly the same as one texel. Closer than that, the texels are larger than screen pixels, and need to be scaled up appropriately — a process known as texture magnification. Farther away, each texel is smaller than a pixel, and so one pixel covers multiple texels. In this case an appropriate color has to be picked based on the covered texels, via texture minification. Graphics APIs such as OpenGL allow the programmer to set different choices for minification and magnification filters. Note that even in the case where the pixels and texels are exactly the same size, one pixel will not necessarily match up exactly to one texel. It may be misaligned or rotated, and cover parts of up to four neighboring texels. Hence some form of filtering is still required. == Mipmapping == Mipmapping is a standard technique used to save some of the filtering work needed during texture minification. It is also highly beneficial for cache coherency - without it the memory access pattern during sampling from distant textures will exhibit extremely poor locality, adversely affecting performance even if no filtering is performed. During texture magnification, the number of texels that need to be looked up for any pixel is always four or fewer; during minification, however, as the textured polygon moves farther away potentially the entire texture might fall into a single pixel. This would necessitate reading all of its texels and combining their values to correctly determine the pixel color, a prohibitively expensive operation. Mipmapping avoids this by prefiltering the texture and storing it in smaller sizes down to a single pixel. As the textured surface moves farther away, the texture being applied switches to the prefiltered smaller size. Different sizes of the mipmap are referred to as 'levels', with Level 0 being the largest size (used closest to the viewer), and increasing levels used at increasing distances. == Filtering methods == This section lists the most common texture filtering methods, in increasing order of computational cost and image quality. === Nearest-neighbor interpolation === Nearest-neighbor interpolation is the simplest and crudest filtering method — it simply uses the color of the texel closest to the pixel center for the pixel color. While simple, this results in a large number of artifacts - texture 'blockiness' during magnification, and aliasing and shimmering during minification. This method is fast during magnification but during minification the stride through memory becomes arbitrarily large and it can often be less efficient than MIP-mapping due to the lack of spatially coherent texture access and cache-line reuse. === Nearest-neighbor with mipmapping === This method still uses nearest neighbor interpolation, but adds mipmapping — first the nearest mipmap level is chosen according to distance, then the nearest texel center is sampled to get the pixel color. This reduces the aliasing and shimmering significantly during minification but does not eliminate it entirely. In doing so it improves texture memory access and cache-line reuse through avoiding arbitrarily large access strides through texture memory during rasterization. This does not help with blockiness during magnification as each magnified texel will still appear as a large rectangle. === Linear mipmap filtering === Less commonly used, OpenGL and other APIs support nearest-neighbor sampling from individual mipmaps whilst linearly interpolating the two nearest mipmaps relevant to the sample. === Bilinear filtering === In Bilinear filtering, the four nearest texels to the pixel center are sampled (at the closest mipmap level), and their colors are combined by weighted average according to distance. This removes the 'blockiness' seen during magnification, as there is now a smooth gradient of color change from one texel to the next, instead of an abrupt jump as the pixel center crosses the texel boundary. Bilinear filtering for magnification filtering is common. When used for minification it is often used with mipmapping; though it can be used without, it would suffer the same aliasing and shimmering problems as nearest-neighbor filtering when minified too much. For modest minification ratios, however, it can be used as an inexpensive hardware accelerated weighted texture supersample. The Nintendo 64 used an unusual version of bilinear filtering where only three pixels are used known as 3-point texture filtering, instead of four due to hardware optimization concerns. This introduces a noticeable "triangulation bias" in some textures. === Trilinear filtering === Trilinear filtering is a remedy to a common artifact seen in mipmapped bilinearly filtered images: an abrupt and very noticeable change in quality at boundaries where the renderer switches from one mipmap level to the next. Trilinear filtering solves this by doing a texture lookup and bilinear filtering on the two closest mipmap levels (one higher and one lower quality), and then linearly interpolating the results. This results in a smooth degradation of texture quality as distance from the viewer increases, rather than a series of sudden drops. Of course, closer than Level 0 there is only one mipmap level available, and the algorithm reverts to bilinear filtering. === Anisotropic filtering === Anisotropic filtering is the highest quality filtering available in current consumer 3D graphics cards. Simpler, "isotropic" techniques use only square mipmaps which are then interpolated using bi– or trilinear filtering. (Isotropic means same in all directions, and hence is used to describe a system in which all the maps are squares rather than rectangles or other quadrilaterals.) When a surface is at a high angle relative to the camera, the fill area for a texture will not be approximately square. Consider the common case of a floor in a game: the fill area is far wider than it is tall. In this case, none of the square maps are a good fit. The result is blurriness and/or shimmering, depending on how the fit is chosen. Anisotropic filtering corrects this by sampling the texture as a non-square shape. The goal is

Ulead MediaStudio Pro

Ulead MediaStudio Pro (MSP) is real-time, timeline based prosumer level video editing software by Ulead Systems. It is a suite of 5 digital video and audio applications, including: Video Capture, Video Paint, CG Infinity, Audio Editor and Video Editor. MSP is only available on the Windows platform. Since version 8.0, CG Infinity and Video Paint are separate from the MSP suite, and are being sold as a combination product called VideoGraphics Lab (VGL). On June 18, 2008, Corel formally announced that MediaStudio Pro would be discontinued. The final MediaStudio Pro version was 8.10.0039 (Pro 8 Service Pack 1) released June 2, 2006. Corel discontinued support for MediaStudio Pro in June 2009. Version 6.0 is last version to support Windows 95, although recent versions are not compatible with Windows Vista or Windows 7. == Modules == There are 5 stand-alone modules in MSP before version 8.0, they are: Video Capture – The video capturing module in MSP. Video Paint – A frame-by-frame editor which can let user to make some image or hand-drawing effects on video frames. CG Infinity – A vector-based video editing tool which allows user to create logo animation or vector graphics on video frames. Audio Editor – The audio editing tool in MSP. It can utilize DirectX audio filters and Ulead audio filters to do audio effect processing. Video Editor – The module that users do video editing with audio/video effects. It can also utilize DirectX audio filters and 3rd party video filters to do the video editing. Since version 8.0, CG Infinity and Video Paint have been separated from the MSP suite and are being sold as a combination product called VideoGraphics Lab (VGL). == Editions == Ulead MediaStudio Pro had several editions before version 7.0. They are: Full edition: this edition includes all 5 modules. Director's Cut edition: this edition has 3 modules including Video Capture, Video Editor and Audio Editor. SE edition: SE means Simple Edition or Special Edition and is an OEM bundle version. It also includes the 3 modules as Director's Cut, however, is feature limited. Sometimes it will be given freely in video magazines. After version 7.0 only Full edition is available in the MSP suite. On June 18, 2008, Corel formally announced that MediaStudio Pro would be discontinued. == Release history ==