The DIKW pyramid (also known as the knowledge pyramid or information hierarchy) is a model describing relationships between data, information, knowledge and wisdom sometimes also stylized as a chain, refer to models of possible structural and functional relationships between a set of components—often four, data, information, knowledge, and wisdom. The concept has roots predating the 1980s. In the latter years of that decade, interest in the models grew after explicit presentations and discussions, including from Milan Zeleny, Russell Ackoff, and Robert W. Lucky. Subsequent important discussions extended along theoretical and practical lines into the coming decades. While debate continues as to actual meaning of the component terms of DIKW-type models, and the actual nature of their relationships—including occasional doubt being cast over any simple, linear, unidirectional model—even so they have become very popular visual representations in use by business, the military, and others. Among the academic and popular, not all versions of the DIKW-type models include all four components (earlier ones excluding data, later ones excluding or downplaying wisdom, and several including additional components (for instance Ackoff inserting "understanding" before and Zeleny adding "enlightenment" after the wisdom component). In addition, DIKW-type models are no longer always presented as pyramids, instead also as a chart or framework (e.g., by Zeleny), as flow diagrams (e.g., by Liew, and by Chisholm et al.), and sometimes as a continuum (e.g., by Choo et al.). == Short description == As Rowley noted in 2007, the DIKW model "is often quoted, or used implicitly, in definitions of data, information and knowledge in the information management, information systems and knowledge management literatures, but [as of that date] there ha[d] been limited direct discussion of the hierarchy". Reviews of textbooks and a survey of scholars in relevant fields indicate that there was not a consensus as to definitions used in the model as of that date, and as reviewed by Liew in that year, even less "in the description of the processes that transform components lower in the hierarchy into those above them". Zins work, published in 2007—from studies in 2003-2005 that documented "130 definitions of data, information, and knowledge formulated by 45 scholars", published in 2007—to suggest that the data–information–knowledge components of DIKW refer to a class of no less than five models, as a function of whether data, information, and knowledge are each conceived of as subjective, objective (what Zins terms, "universal" or "collective") or both. In Zins' usage, subjective and objective "are not related to arbitrariness and truthfulness, which are usually attached to the concepts of subjective knowledge and objective knowledge". Information science, Zins argues, studies data and information, but not knowledge, as knowledge is an internal (subjective) rather than an external (universal–collective) phenomenon. == Representations == === Graphical representation === DIKW is a hierarchical model often depicted as a pyramid, sometimes as a chain, with data at its base and wisdom at its apex (or chain-beginning and -end). Both Zeleny and Ackoff have been credited with originating the pyramid representation, although neither used a pyramid to present their ideas. According to Wallace, Debons and colleagues may have been the first to "present the hierarchy graphically". Many variations of the DIKW-type pyramid have been produced. One, in use by knowledge managers in the United States Department of Defense, attempts to show the DIKW progression to enable effective decisions and consequent activities supporting shared understanding throughout defense organizations, as well as supporting management of risks associated with decisions. DIKW-type hierarchical information paradigms have also been represented as two-dimensional charts, and as flow diagrams, where relationships between the components may be presented less hierarchically, with defining aspects of the relationships, feedback loops, etc. === Computational representation === Intelligent decision support systems are trying to improve decision making by introducing new technologies and methods from the domain of modeling and simulation in general, and in particular from the domain of intelligent software agents in the contexts of agent-based modeling. The following example describes a military decision support system, but the architecture and underlying conceptual idea are transferable to other application domains: The value chain starts with data quality describing the information within the underlying command and control systems. Information quality tracks the completeness, correctness, currency, consistency and precision of the data items and information statements available. Knowledge quality deals with procedural knowledge and information embedded in the command and control system such as templates for adversary forces, assumptions about entities such as ranges and weapons, and doctrinal assumptions, often coded as rules. Awareness quality measures the degree of using the information and knowledge embedded within the command and control system. Awareness is explicitly placed in the cognitive domain. By the introduction of a common operational picture, data are put into context, which leads to information instead of data. The next step, which is enabled by service-oriented web-based infrastructures (but not yet operationally used), is the use of models and simulations for decision support. Simulation systems are the prototype for procedural knowledge, which is the basis for knowledge quality. Finally, using intelligent software agents to continually observe the battle sphere, apply models and simulations to analyze what is going on, to monitor the execution of a plan, and to do all the tasks necessary to make the decision maker aware of what is going on, command and control systems could even support situational awareness, the level in the value chain traditionally limited to pure cognitive methods. == History == Danny P. Wallace, a professor of library and information science, explained that the origin of the DIKW pyramid is uncertain: The presentation of the relationships among data, information, knowledge, and sometimes wisdom in a hierarchical arrangement has been part of the language of information science for many years. Although it is uncertain when and by whom those relationships were first presented, the ubiquity of the notion of a hierarchy is embedded in the use of the acronym DIKW as a shorthand representation for the data-to-information-to-knowledge-to-wisdom transformation.Many authors think that the idea of the DIKW relationship originated from two lines in the poem "Choruses", by T. S. Eliot, that appeared in the pageant play The Rock, in 1934: === Knowledge, intelligence, and wisdom === In 1927, Clarence W. Barron addressed his employees at Dow Jones & Company on the hierarchy: "Knowledge, Intelligence and Wisdom". === Data, information, knowledge === In 1955, English-American economist and educator Kenneth Boulding presented a variation on the hierarchy consisting of "signals, messages, information, and knowledge". However, "[t]he first author to distinguish among data, information, and knowledge and to also employ the term 'knowledge management' may have been American educator Nicholas L. Henry", in a 1974 journal article. === Data, information, knowledge, wisdom === Other early versions (prior to 1982) of the hierarchy that refer to a data tier include those of Chinese-American geographer Yi-Fu Tuan and sociologist-historian Daniel Bell.. In 1980, Irish-born engineer Mike Cooley invoked the same hierarchy in his critique of automation and computerization, in his book Architect or Bee?: The Human / Technology Relationship. Thereafter, in 1987, Czechoslovakia-born educator Milan Zeleny mapped the components of the hierarchy to knowledge forms: know-nothing, know-what, know-how, and know-why. Zeleny "has frequently been credited with proposing the [representation of DIKW as a pyramid ]... although he actually made no reference to any such graphical model." The hierarchy appears again in a 1988 address to the International Society for General Systems Research, by American organizational theorist Russell Ackoff, published in 1989. Subsequent authors and textbooks cite Ackoff's as the "original articulation" of the hierarchy or otherwise credit Ackoff with its proposal. Ackoff's version of the model includes an understanding tier (as Adler had, before him), interposed between knowledge and wisdom. Although Ackoff did not present the hierarchy graphically, he has also been credited with its representation as a pyramid. In 1989, Bell Labs veteran Robert W. Lucky wrote about the four-tier "information hierarchy" in the form of a pyramid in his book Silicon Dreams. In the same year as Ackoff presented his a
Unit of work
A unit of work is a behavioral pattern in software development. Martin Fowler has defined it as everything one does during a business transaction which can affect the database. When the unit of work is finished, it will provide everything that needs to be done to change the database as a result of the work. A unit of work encapsulates one or more code repositories[de] and a list of actions to be performed which are necessary for the successful implementation of self-contained and consistent data change. A unit of work is also responsible for handling concurrency issues, and can be used for transactions and stability patterns.[de]
Artificial intelligence in Indonesia
Artificial intelligence in Indonesia refers to development, use and governance of artificial intelligence in Indonesia. Indonesia has treated AI as a national policy area through the Strategi Nasional Kecerdasan Artifisial or National Artificial Intelligence Strategy for 2020–2045. Public discussion has focused on the role of AI in sectors such as health, agriculture, education, mobile technology and e-commerce. Recent developments include AI ethics guidance issued by the communications ministry. Proposals for a national AI roadmap and sovereign AI fund, investment in cloud and AI infrastructure, and local-language AI initiatives for Bahasa Indonesia and regional Indonesian languages. == National strategy == Indonesia's National Artificial Intelligence Strategy is known in Indonesian as Strategi Nasional Kecerdasan Artifisial or Stranas KA. The strategy was published as a long-term framework for the development and use of AI between 2020 and 2045. It is intended to guide ministries, government agencies, regional governments and other stakeholders. The strategy identifies five priority sectors: health services, bureaucratic reform, education and research, food security, and mobility and smart cities. OECD lists the Ministry of Research and Technology and the National Research and Innovation Agency as organisations associated with the strategy. The strategy was developed through consultation with public and private stakeholders. == Institutions == The Indonesian Artificial Intelligence Industry Research and Innovation Collaboration, known as KORIKA is the nodal agency for the national AI strategy. KORIKA describes its vision as creating a collaborative ecosystem to accelerate implementation of the national AI strategy towards Vision Indonesia 2045. The Ministry of Communication and Digital Affairs has also been involved in AI governance, digital policy and public communication. In 2025, Reuters reported that the ministry was preparing a national AI roadmap to give investors and developers a clearer view of Indonesia's market, infrastructure and computing capacity. == AI Governance == Indonesia has introduced policy guidance on the ethical use of artificial intelligence. The policy sets out ethical values for the development and use of AI. These include humanity, security, transparency, credibility and accountability, personal data protection, sustainable development and intellectual property protection. A UNESCO country profile on Indonesia noted that Indonesia had adopted a national AI strategy and had policy frameworks. It also identified gaps in internet access, gender inclusion, language datasets, digital talent and cybersecurity. UNESCO recommended that Indonesia update its AI standards, invest in ethical AI, strengthen research coordination and consider establishing a national agency for artificial intelligence. In May 2026, Antara News reported comments by Deputy Minister of Communication and Digital Affairs Nezar Patria. Who said that AI safety requires partnerships, shared standards and continuing dialogue. == Sectors == AI policy discussions in Indonesia have identified health, agriculture, education, government services, mobility and smart cities as areas where AI could be applied. Mobile technology and e-commerce have been discussed as important areas of AI adoption in Indonesia. Research on AI adoption in Indonesia by Siddhartha Paul Tiwari and Adi Fahrudin has also examined mobile and e-commerce sectors. UNESCO has also noted that Indonesia's large digital economy and startup ecosystem have supported AI adoption, while also pointing to challenges in talent, research capacity and cybersecurity. Indonesia is one of the developing-country markets attracting AI infrastructure investment, including data centres. == Challenges == Indonesia faces several challenges in developing and governing AI. These include gaps in computing infrastructure, uneven connectivity outside major cities, shortages of skilled workers, limited research funding, cybersecurity risks, misinformation, data leaks and the underrepresentation of Indonesian and indigenous languages in AI datasets. UNESCO noted that Bahasa is spoken by around 200 million people but remains underrepresented in AI. It also noted that Indonesia has more than 700 indigenous languages, many of which face the risk of extinction. UNESCO recommended stronger coordination in AI research and a more unified strategy for using AI in language preservation.
Ontology merging
Ontology merging defines the act of bringing together two conceptually divergent ontologies or the instance data associated to two ontologies. This is similar to work in database merging (schema matching). This merging process can be performed in a number of ways, manually, semi automatically, or automatically. Manual ontology merging although ideal is extremely labour-intensive and current research attempts to find semi or entirely automated techniques to merge ontologies. These techniques are statistically driven often taking into account similarity of concepts and raw similarity of instances through textual string metrics and semantic knowledge. These techniques are similar to those used in information integration employing string metrics from open source similarity libraries.
Storage area network
A storage area network (SAN) or storage network is a computer network which provides access to consolidated, block-level data storage. SANs are primarily used to access data storage devices, such as disk arrays and tape libraries from servers so that the devices appear to the operating system as direct-attached storage. A SAN typically is a dedicated network of storage devices not accessible through the local area network (LAN). Although a SAN provides only block-level access, file systems built on top of SANs do provide file-level access and are known as shared-disk file systems. Newer SAN configurations enable hybrid SAN and allow traditional block storage that appears as local storage but also object storage for web services through APIs. == Storage architectures == Storage area networks (SANs) are sometimes referred to as network behind the servers and historically developed out of a centralized data storage model, but with its own data network. A SAN is, at its simplest, a dedicated network for data storage. In addition to storing data, SANs allow for the automatic backup of data, and the monitoring of the storage as well as the backup process. A SAN is a combination of hardware and software. It grew out of data-centric mainframe architectures, where clients in a network can connect to several servers that store different types of data. To scale storage capacities as the volumes of data grew, direct-attached storage (DAS) was developed, where disk arrays or just a bunch of disks (JBODs) were attached to servers. In this architecture, storage devices can be added to increase storage capacity. However, the server through which the storage devices are accessed is a single point of failure, and a large part of the LAN network bandwidth is used for accessing, storing and backing up data. To solve the single point of failure issue, a direct-attached shared storage architecture was implemented, where several servers could access the same storage device. DAS was the first network storage system and is still widely used where data storage requirements are not very high. Out of it developed the network-attached storage (NAS) architecture, where one or more dedicated file server or storage devices are made available in a LAN. Therefore, the transfer of data, particularly for backup, still takes place over the existing LAN. If more than a terabyte of data was stored at any one time, LAN bandwidth became a bottleneck. Therefore, SANs were developed, where a dedicated storage network was attached to the LAN, and terabytes of data are transferred over a dedicated high speed and bandwidth network. Within the SAN, storage devices are interconnected. Transfer of data between storage devices, such as for backup, happens behind the servers and is meant to be transparent. In a NAS architecture data is transferred using the TCP and IP protocols over Ethernet. Distinct protocols were developed for SANs, such as Fibre Channel, iSCSI, Infiniband. Therefore, SANs often have their own network and storage devices, which have to be bought, installed, and configured. This makes SANs inherently more expensive than NAS architectures. == Components == SANs have their own networking devices, such as SAN switches. To access the SAN, so-called SAN servers are used, which in turn connect to SAN host adapters. Within the SAN, a range of data storage devices may be interconnected, such as SAN-capable disk arrays, JBODs and tape libraries. === Host layer === Servers that allow access to the SAN and its storage devices are said to form the host layer of the SAN. Such servers have host adapters, which are cards that attach to slots on the server motherboard (usually PCI slots) and run with a corresponding firmware and device driver. Through the host adapters the operating system of the server can communicate with the storage devices in the SAN. In Fibre channel deployments, a cable connects to the host adapter through the gigabit interface converter (GBIC). GBICs are also used on switches and storage devices within the SAN, and they convert digital bits into light impulses that can then be transmitted over the Fibre Channel cables. Conversely, the GBIC converts incoming light impulses back into digital bits. The predecessor of the GBIC was called gigabit link module (GLM). === Fabric layer === The fabric layer consists of SAN networking devices that include SAN switches, routers, protocol bridges, gateway devices, and cables. SAN network devices move data within the SAN, or between an initiator, such as an HBA port of a server, and a target, such as the port of a storage device. When SANs were first built, hubs were the only devices that were Fibre Channel capable, but Fibre Channel switches were developed and hubs are now rarely found in SANs. Switches have the advantage over hubs that they allow all attached devices to communicate simultaneously, as a switch provides a dedicated link to connect all its ports with one another. When SANs were first built, Fibre Channel had to be implemented over copper cables, these days multimode optical fibre cables are used in SANs. SANs are usually built with redundancy, so SAN switches are connected with redundant links. SAN switches connect the servers with the storage devices and are typically non-blocking allowing transmission of data across all attached wires at the same time. SAN switches are for redundancy purposes set up in a meshed topology. A single SAN switch can have as few as 8 ports and up to 32 ports with modular extensions. So-called director-class switches can have as many as 128 ports. In switched SANs, the Fibre Channel switched fabric protocol FC-SW-6 is used under which every device in the SAN has a hardcoded World Wide Name (WWN) address in the host bus adapter (HBA). If a device is connected to the SAN its WWN is registered in the SAN switch name server. In place of a WWN, or worldwide port name (WWPN), SAN Fibre Channel storage device vendors may also hardcode a worldwide node name (WWNN). The ports of storage devices often have a WWN starting with 5, while the bus adapters of servers start with 10 or 21. === Storage layer === The serialized Small Computer Systems Interface (SCSI) protocol is often used on top of the Fibre Channel switched fabric protocol in servers and SAN storage devices. The Internet Small Computer Systems Interface (iSCSI) over Ethernet and the Infiniband protocols may also be found implemented in SANs, but are often bridged into the Fibre Channel SAN. However, Infiniband and iSCSI storage devices, in particular, disk arrays, are available. The various storage devices in a SAN are said to form the storage layer. It can include a variety of hard disk and magnetic tape devices that store data. In SANs, disk arrays are joined through a RAID which makes a lot of hard disks look and perform like one big storage device. Every storage device, or even partition on that storage device, has a logical unit number (LUN) assigned to it. This is a unique number within the SAN. Every node in the SAN, be it a server or another storage device, can access the storage by referencing the LUN. The LUNs allow for the storage capacity of a SAN to be segmented and for the implementation of access controls. A particular server, or a group of servers, may, for example, be only given access to a particular part of the SAN storage layer, in the form of LUNs. When a storage device receives a request to read or write data, it will check its access list to establish whether the node, identified by its LUN, is allowed to access the storage area, also identified by a LUN. LUN masking is a technique whereby the host bus adapter and the SAN software of a server restrict the LUNs for which commands are accepted. In doing so LUNs that should never be accessed by the server are masked. Another method to restrict server access to particular SAN storage devices is fabric-based access control, or zoning, which is enforced by the SAN networking devices and servers. Under zoning, server access is restricted to storage devices that are in a particular SAN zone. == Network protocols == A mapping layer to other protocols is used to form a network: ATA over Ethernet (AoE), mapping of AT Attachment (ATA) over Ethernet Fibre Channel Protocol (FCP), a mapping of SCSI over Fibre Channel Fibre Channel over Ethernet (FCoE) ESCON over Fibre Channel (FICON), used by mainframe computers HyperSCSI, mapping of SCSI over Ethernet iFCP or SANoIP mapping of FCP over IP iSCSI, mapping of SCSI over TCP/IP iSCSI Extensions for RDMA (iSER), mapping of iSCSI over InfiniBand Network block device, mapping device node requests on UNIX-like systems over stream sockets like TCP/IP SCSI RDMA Protocol (SRP), another SCSI implementation for remote direct memory access (RDMA) transports Storage networks may also be built using Serial Attached SCSI (SAS) and Serial ATA (SATA) technologies. SAS evolved from SCSI direct-attached storage. SATA evolved from Para
Automatic taxonomy construction
Automatic taxonomy construction (ATC) is the use of software programs to generate taxonomical classifications from a body of texts called a corpus. ATC is a branch of natural language processing, which in turn is a branch of artificial intelligence. A taxonomy (or taxonomical classification) is a scheme of classification, especially, a hierarchical classification, in which things are organized into groups or types. Among other things, a taxonomy can be used to organize and index knowledge (stored as documents, articles, videos, etc.), such as in the form of a library classification system, or a search engine taxonomy, so that users can more easily find the information they are searching for. Many taxonomies are hierarchies (and thus, have an intrinsic tree structure), but not all are. Manually developing and maintaining a taxonomy is a labor-intensive task requiring significant time and resources, including familiarity of or expertise in the taxonomy's domain (scope, subject, or field), which drives the costs and limits the scope of such projects. Also, domain modelers have their own points of view which inevitably, even if unintentionally, work their way into the taxonomy. ATC uses artificial intelligence techniques to quickly automatically generate a taxonomy for a domain in order to avoid these problems and remove limitations. == Approaches == There are several approaches to ATC. One approach is to use rules to detect patterns in the corpus and use those patterns to infer relations such as hyponymy. Other approaches use machine learning techniques such as Bayesian inferencing and Artificial Neural Networks. === Keyword extraction === One approach to building a taxonomy is to automatically gather the keywords from a domain using keyword extraction, then analyze the relationships between them (see Hyponymy, below), and then arrange them as a taxonomy based on those relationships. === Hyponymy and "is-a" relations === In ATC programs, one of the most important tasks is the discovery of hypernym and hyponym relations among words. One way to do that from a body of text is to search for certain phrases like "is a" and "such as". In linguistics, is-a relations are called hyponymy. Words that describe categories are called hypernyms and words that are examples of categories are hyponyms. For example, dog is a hypernym and Fido is one of its hyponyms. A word can be both a hyponym and a hypernym. So, dog is a hyponym of mammal and also a hypernym of Fido. Taxonomies are often represented as is-a hierarchies where each level is more specific than (in mathematical language "a subset of") the level above it. For example, a basic biology taxonomy would have concepts such as mammal, which is a subset of animal, and dogs and cats, which are subsets of mammal. This kind of taxonomy is called an is-a model because the specific objects are considered instances of a concept. For example, Fido is-a instance of the concept dog and Fluffy is-a cat. == Applications == ATC can be used to build taxonomies for search engines, to improve search results. ATC systems are a key component of ontology learning (also known as automatic ontology construction), and have been used to automatically generate large ontologies for domains such as insurance and finance. They have also been used to enhance existing large networks such as Wordnet to make them more complete and consistent. == ATC software == == Other names == Other names for automatic taxonomy construction include: Automated outline building Automated outline construction Automated outline creation Automated outline extraction Automated outline generation Automated outline induction Automated outline learning Automated outlining Automated taxonomy building Automated taxonomy construction Automated taxonomy creation Automated taxonomy extraction Automated taxonomy generation Automated taxonomy induction Automated taxonomy learning Automatic outline building Automatic outline construction Automatic outline creation Automatic outline extraction Automatic outline generation Automatic outline induction Automatic outline learning Automatic taxonomy building Automatic taxonomy creation Automatic taxonomy extraction Automatic taxonomy generation Automatic taxonomy induction Automatic taxonomy learning Outline automation Outline building Outline construction Outline creation Outline extraction Outline generation Outline induction Outline learning Semantic taxonomy building Semantic taxonomy construction Semantic taxonomy creation Semantic taxonomy extraction Semantic taxonomy generation Semantic taxonomy induction Semantic taxonomy learning Taxonomy automation Taxonomy building Taxonomy construction Taxonomy creation Taxonomy extraction Taxonomy generation Taxonomy induction Taxonomy learning
Affective computing
Affective computing is the study and development of systems and devices that can recognize, interpret, process, and simulate human affects. It is an interdisciplinary field spanning computer science, psychology, and cognitive science. While some core ideas in the field may be traced as far back as to early philosophical inquiries into emotion, the modern idea originated with Rosalind Picard's 1995 paper entitled "Affective Computing" and her 1997 book of the same name published by MIT Press. One motivation for researching affective computing is the ability to give machines emotional intelligence, including simulating empathy. The goal is that a machine should interpret the emotional state of humans and adapt its behavior to those emotions, responding appropriately. Recent experimental research has shown that subtle affective haptic feedback can shape human reward learning and mobile interaction behavior, suggesting that affective computing systems may not only interpret emotional states but also actively modulate user actions through emotion-laden outputs. == Areas == === Detecting and recognizing emotional information === Detecting emotional information usually begins with passive sensors that capture data about the user's physical state or behavior without interpreting the input. The data gathered is analogous to the cues humans use to perceive emotions in others. For example, a video camera might capture facial expressions, body posture, and gestures, while a microphone might capture speech. Other sensors detect emotional cues by directly measuring physiological data, such as skin temperature and galvanic resistance. Recognizing emotional information requires the extraction of meaningful patterns from the gathered data. This is done using machine learning techniques that process different modalities, such as speech recognition, natural language processing, or facial expression detection. The goal of most of these techniques is to produce labels that would match the labels a human would give in the same situation. For example, if a person makes a facial expression furrowing their brow, then the computer vision system might be trained to label their face as appearing "confused" or as "concentrating" or "slightly negative" (as opposed to positive, which it might say if they were smiling in a happy-appearing way). This response is based on the data used to train the system. These labels may or may not correspond to what the person is actually feeling. === Emotion in machines === Another area within affective computing is the design of computational devices proposed to exhibit either innate emotional capabilities or that are capable of convincingly simulating emotions. A more practical approach, based on current technological capabilities, is the simulation of emotions in conversational agents in order to enrich and facilitate interactivity between human and machine. Marvin Minsky, one of the pioneering computer scientists in artificial intelligence, relates emotions to the broader issues of machine intelligence stating in The Emotion Machine that emotion is "not especially different from the processes that we call 'thinking.'" The innovative approach "digital humans" or virtual humans includes an attempt to give these programs, which simulate humans, an emotional dimension as well, including reactions, facial expressions, and gestures in accordance with the reaction that a real person would have in certain emotionally stimulating situations. Emotion in machines often refers to emotion in computational, often AI-based, systems. As a result, the terms 'emotional AI' is being used. Some modern large language models simulate emotions in their chats with humans. ChatGPT's simulated emotion leans more positive than that of most human responses. == Technologies == In psychology, cognitive science, and in neuroscience, there have been two main approaches for describing how humans perceive and classify emotion: continuous or categorical. The continuous approach tends to use dimensions such as negative vs. positive, calm vs. aroused. The categorical approach tends to use discrete classes such as happy, sad, angry, fearful, surprise, and disgust. Different kinds of machine learning regression and classification models are used for machines to produce continuous or discrete labels. Sometimes, models are also built that allow combinations across the categories (e.g. a happy-surprised face or a fearful-surprised face). The following sections consider many of the kinds of input data used for the task of emotion recognition. === Emotional speech === Various changes in the autonomic nervous system can indirectly alter a person's speech, and affective technologies can leverage this information to recognize emotion. For example, speech produced in a state of fear, anger, or joy becomes fast, loud, and precisely enunciated, with a higher and wider range in pitch, whereas emotions such as tiredness, boredom, or sadness tend to generate slow, low-pitched, and slurred speech. Some emotions have been found to be more easily computationally identified, such as anger or approval. Emotional speech processing technologies recognize the user's emotional state using computational analysis of speech features. Vocal parameters and prosodic features such as pitch variables and speech rate can be analyzed through pattern recognition techniques. Speech analysis is an effective method of identifying affective state, having an average reported accuracy of 70-80% in research from 2003 and 2006. These systems tend to outperform average human accuracy (approximately 60%) but are less accurate than systems which employ other modalities for emotion detection, such as physiological states or facial expressions. However, since many speech characteristics are independent of semantics or culture, this technique is considered to be a promising route for further research. ==== Algorithms ==== The process of speech/text affect detection requires the creation of a reliable database, knowledge base, or vector space model, broad enough to fit every need for its application, as well as the selection of a successful classifier which will allow for quick and accurate emotion identification. As of 2010, the most frequently used classifiers were linear discriminant classifiers (LDC), k-nearest neighbor (k-NN), Gaussian mixture model (GMM), support vector machines (SVM), artificial neural networks (ANN), decision tree algorithms, and hidden Markov models (HMMs). Various studies showed that choosing the appropriate classifier can significantly enhance the overall performance of the system. The list below gives a brief description of each algorithm: LDC – Classification happens based on the value obtained from the linear combination of the feature values, which are usually provided in the form of vector features. k-NN – Classification happens by locating the object in the feature space, and comparing it with the k nearest neighbors (training examples). The majority vote decides on the classification. GMM – A probabilistic model used for representing the existence of subpopulations within the overall population. Each sub-population is described using the mixture distribution, which allows for classification of observations into the sub-populations. SVM – A type of (usually binary) linear classifier which decides in which of the two (or more) possible classes, each input may fall into. ANN – is a mathematical model, inspired by biological neural networks, that can better grasp possible non-linearities of the feature space. Decision tree algorithms – work based on following a decision tree in which leaves represent the classification outcome, and branches represent the conjunction of subsequent features that lead to the classification. HMMs – a statistical Markov model in which the states and state transitions are not directly available to observation. Instead, the series of outputs dependent on the states are visible. In the case of affect recognition, the outputs represent the sequence of speech feature vectors, which allow the deduction of states' sequences through which the model progressed. The states can consist of various intermediate steps in the expression of an emotion, and each of them has a probability distribution over the possible output vectors. The states' sequences allow us to predict the affective state which we are trying to classify, and this is one of the most commonly used techniques within the area of speech affect detection. It has been proven that having enough acoustic evidence available the emotional state of a person can be classified by a set of majority voting classifiers. The proposed set of classifiers is based on three main classifiers: kNN, C4.5 and SVM-RBF Kernel. This set achieves better performance than each basic classifier taken separately. It is compared with two other sets of classifiers: one-against-all (OAA) multiclass SVM with Hybrid kernels and th