The Linux Trace Toolkit (LTT) is a set of tools that is designed to log program execution details from a patched Linux kernel and then perform various analyses on them, using console-based and graphical tools. LTT has been mostly superseded by its successor LTTng (Linux Trace Toolkit Next Generation). LTT allows the user to see in-depth information about the processes that were running during the trace period, including when context switches occurred, how long the processes were blocked for, and how much time the processes spent executing vs. how much time the processes were blocked. The data is logged to a text file and various console-based and graphical (GTK+) tools are provided for interpreting that data. In order to do data collection, LTT requires a patched Linux kernel. The authors of LTT claim that the performance hit for a patched kernel compared to a regular kernel is minimal; Their testing has reportedly shown that this is less than 2.5% on a "normal use" system (measured using batches of kernel makes) and less than 5% on a file I/O intensive system (measured using batches of tar). == Usage == === Collecting trace data === Data collection is Started by: trace 15 foo This command will cause the LTT tracedaemon to do a trace that lasts for 15 seconds, writing trace data to foo.trace and process information from the /proc filesystem to foo.proc. The trace command is actually a script which runs the program tracedaemon with some common options. It is possible to run tracedaemon directly and in that case, the user can use a number of command-line options to control the data which is collected. For the complete list of options supported by tracedaemon, see the online manual page for tracedaemon. === Viewing the results === Viewing the results of a trace can be accomplished with: traceview foo This command will launch a graphical (GTK+) traceview tool that will read from foo.trace and foo.proc. This tool can show information in various interesting ways, including Event Graph, Process Analysis, and Raw Trace. The Event Graph is perhaps the most interesting view, showing the exact timing of events like page faults, interrupts, and context switches, in a simple graphical way. The traceview command is a wrapper for a program called tracevisualizer. For the complete list of options supported by tracevisualizer, see the online manual page for tracevisualizer.
Elowan
Elowan is a plant-robot cyborg. Using its own internal bioelectrical signals, The plant has a robotic extension that makes it move towards light sources. Electrodes are inserted into the leaves, stem, and ground to detect the faint bioelectrical signals the plant produces. Then they are amplified so the robot can read them. So when the plant "wants" to go to light, the cyborg automatically goes to the nearest light source. Future extensions of the robot could provide: Protection, growth frameworks, and nutrients. Other factors that could make the cyborg move are temperature, soil, and gravity conditions Elowan is one in a series of plant-electronic hybrid experiments.
Group (online social networking)
A group (often termed as a community, e-group or club) is a feature in many social networking services which allows users to create, post, comment to and read from their own interest- and niche-specific forums, often within the realm of virtual communities. Groups, which may allow for open or closed access, invitation and/or joining by other users outside the group, are formed to provide mini-networks within the larger, more diverse social network service. Much like electronic mailing lists, they are also owned and maintained by owners, moderators, or managers, who can edit posts to discussion threads and regulate member behavior within the group. However, unlike traditional Internet forums and mailing lists, groups in social networking services allow owners and moderators alike to share account credentials between groups without having to log in to every group. == History == The rise of the World Wide Web resulted in an expansion of the varieties of methods for communication on the Internet, much of which was limited in the 1980s to discussion in newsgroups, BBS and chat rooms. While the initial rise of web-based mass communication took place in the form of early Internet forums in the mid-1990s, a few services such as MSN Groups, Yahoo! Groups and eGroups pioneered the combination of web-based mailing list archives with user profiles; by 2000, such services doubled as full-fledged mailing lists and Internet forums, allowing users to create an extremely large variety of discussion and networking mediums with comparatively sparse thresholds of complexity. Further features included chat rooms (often Java-based), image and video galleries, and group calendars. The second spurt of bullecalbel networking, one which was less dependent upon mailing list-related features and more upon Internet forum features, began in the early- to mid-2000s in the form of such services as LiveJournal, Friendster, MySpace and Facebook. These services continued the evolution of the web-based e-group as a discussion and organization medium. In the late 2000s, services such as Yammer and Micromobs further advanced e-group communication by taking advantage of microblog-style activity streams. == In virtual worlds == In Second Life, groups are centered less around discussion forums (as such, an asynchronous conferencing feature is not built into the Second Life network as of 2009) and common interest, and are more centered on maintenance of a particular geographic location inside the network. Such groups are often created by the owners of areas such as buildings, plots of land or whole islands in order to cater to the most frequent visitors and patrons of the regions. With the limited asynchronous messaging capability of Second Life, groups are also a means of mass-emailing announcements pertinent to the group, but are not completely capable of hosting discussion or deliberation of such announcement messages. == The importance of online social networking groups == Before people expanded their social life to the internet, they had small circles. These included the networks gained from rural areas or villages, such as family, friends and neighbors, and community groups such as churches. These networks represented a social safety net to support individuals. Since we have moved a huge part of our social life to the internet, online social networking groups have become a way to maintain a structure in social life. Online networking is made up by clusters of people, bounding themselves together on the World Wide Web. To be able to sort out the many different clusters we belong to we use online groups to helps us arrange and make sense of all our contacts. This sense-making is rooted within us, we sort and put people into compartments or sort by categories to make sense and try to understand our relationships to the people around us. Online social networking groups therefore enables us to do the same thing online. Online social networks have a huge impact on people’s lives. Since the social network revolution has offered people with more loose ties and diversity in their relationships, it creates both stress and opportunities. Furthermore, the Internet revolution has transformed the contact point from a household to the individual. In addition, people are in constant communication with each other due to the mobile revolution. All in all, the mentioned revolutions created a new social operating system: "networked individualism". The way that people currently connect, communicate and exchange information can be described as a form of operating system because of the similarities between the structure of computer systems and the networked individualism that has taken form in society. These structures consist of unwritten rules, norms, constraints and opportunities which are apparent for those who are part of a specific network. == Concerns == There is some research claiming that fake news is infiltrating online social networking. A recent study claimed that people exposed to fake news generally revert to their original opinion even after finding out the information they were given was false.
T.38
T.38 is an ITU recommendation for allowing transmission of fax over IP networks (FoIP) in real time. == History == The T.38 fax relay standard was devised in 1998 as a way to transport faxes across IP networks between existing Group 3 (G3) fax terminals. T.4 and related fax standards were published by the ITU in 1980, before the rise of the Internet. In the late 1990s, VoIP, or voice over IP, began to gain ground as an alternative to the conventional public switched telephone network (PSTN). However, because most VoIP systems are optimized (through their use of aggressive lossy bandwidth-saving compression) for voice rather than data calls, conventional fax machines worked poorly or not at all on them due to the network impairments such as delay, jitter, packet loss, and so on. Thus, some way of transmitting fax over IP was needed. == Overview == In practical scenarios, a T.38 fax call has at least part of the call being carried over PSTN, although this is not required by the T.38 definition, and two T.38 devices can send faxes to each other. This particular type of device is called Internet-Aware Fax device, or IAF, and it is capable of initiating or completing a fax call towards the IP network. The typical scenario where T.38 is used is – T.38 fax relay – where a T.30 fax device sends a fax over PSTN to a T.38 fax gateway which converts or encapsulates the T.30 protocol into a T.38 data stream. This is then sent either to a T.38-enabled end point such as fax machine or fax server or another T.38 gateway that converts it back to a PSTN PCM or analog signal and terminates the fax on a T.30 device. The T.38 recommendation defines the use of both TCP and UDP to transport T.38 packets. Implementations tend to use UDP, due to TCP's requirement for acknowledgement packets and resulting retransmission during packet loss, which introduces delays. When using UDP, T.38 copes with packet loss by using redundant data packets. T.38 is not a call setup protocol, thus the T.38 devices need to use standard call setup protocols to negotiate the T.38 call, e.g. H.323, SIP & MGCP. == Operation == There are two primary ways that fax transactions are conveyed across packet networks. The T.37 standard specifies how a fax image is encapsulated in e-mail and transported, ultimately, to the recipient using a store-and-forward process through intermediary entities. T.38, however, defines a protocol that supports the use of the T.30 protocol in both the sender and recipient terminals. (See diagram above.) T.38 lets one transmit a fax across an IP network in real time, just as the original G3 fax standards did for the traditional (time-division multiplexed (TDM)) network, also called the public switched telephone network or PSTN. A special protocol is needed for real-time fax over IP (Internet Protocol) since existing fax terminals only supported PSTN connections, where the information flow was generally smooth and uninterrupted, as opposed to the jittery arrival of IP packets. The trick was to come up with a protocol that makes the IP network “invisible” to the endpoint fax terminals, which would mean the user of a legacy fax terminal need not know that the fax call was traversing an IP network. The network interconnections supported by T.38 are shown above. The two fax terminals on either side of the figure communicate using the T.30 fax protocol published by the ITU in 1980. Interconnection of the PSTN with the IP packet network requires a “gateway” between the PSTN and IP networks. PSTN-IP Gateways support TDM voice on the PSTN side and VoIP and FoIP on the packet side. For voice sessions, the gateway will take in voice packets on the IP side, accumulate a few packets to ensure a smooth flow of TDM data upon their release, and then meter them out over TDM where they eventually are heard by a human or stored on a computer for later playback. The gateway employs packet-management techniques to enhance the quality of the speech in the presence of network errors by taking advantage of the natural ability of a listener to not really hear the occasional missing or repeated packet. But facsimile data are transmitted by modems, which aren't as forgiving as the human ear is for speech. Missing packets will often cause a fax session to fail at worst or create one or more image lines in error at best. So the job of T.38 is to “fool” the terminal into “thinking” that it's communicating directly with another T.30 terminal. It will also correct for network delays with so-called spoofing techniques, and missing or delayed packets with fax-aware buffer-management techniques. Spoofing refers to the logic implemented in the protocol engine of a T.38 relay that modifies the protocol commands and responses on the TDM side to keep network delays on the IP side from causing the transaction to fail. This is done, for example, by padding image lines or deliberately causing a message to be re-transmitted to render network delays transparent to the sending/receiving fax terminals. Networks that do not have packet loss or excessive delay can exhibit acceptable fax performance without T.38, provided the PCM clocks in all gateways are of very high accuracy (explained below). T.38 not only removes the effect of PCM clocks not being synchronized, but also reduces the required network bandwidth by a factor of 10, while it corrects for packet loss and delay. === Bandwidth reduction === As shown in the diagram below, a T.38 gateway is composed of two primary elements: the fax modems and the T.38 subsystem. The fax modems modulate and demodulate the PCM samples of the analog data, turning the sampled-data representation of the fax terminal's analog signal to its binary translation, and vice versa. The PSTN network samples the analog signal of a voice or modem signal (it doesn't know the difference) 8,000 times per second (SPS), and encodes them as 8-bit data bytes. This means 8000 samples-per-second times 8-bits per sample, or 64,000 bits per second (bit/s) to represent the modem (or voice) data in one direction. For both directions the modem transaction consumes 128,000 bits of network bandwidth. However, the typical modem in a fax terminal transmits the image data at 33,600 bit/s, so if the analog data are first converted to the digital content they represent, only 33,600 bits (plus network overhead of a few bytes) are needed. And since T.30 fax is a half-duplex protocol, the network is only needed for one direction at a time. Refer to RFC 3261 === PCM clock synchronization === In the diagram above, there is a sample-rate clock in the fax terminal and one in the gateway's modems that is used to trigger the sampling of the analog line 8,000 times per second. These clocks are usually quite accurate, but in some low-cost terminal adapters (a one or two-line gateway) the PCM clock can be surprisingly inaccurate. If the terminal is sending data to the gateway, and the gateway's clock is too slow, the buffers (jitter buffers) in the gateway will eventually overflow, causing the transaction to fail. Since the difference is often quite small, this problem occurs on long, detailed fax images giving the clocks more time to cause the jitter buffer in gateway to either underflow or overflow, which is just the same as missing or duplicated packets. === Packet loss === T.38 provides facilities to eliminate the effects of packet loss through data redundancy. When a packet is sent, either zero, one, two, three, or even more of the previously sent packets are repeated. (The specification does not impose a limit.) This increases the network bandwidth required (it's still much less than not using T.38) but it allows the receiving gateway to reconstruct the complete packet sequence, even with a fairly high level of packet loss. == Related standards == T.4 is the umbrella specification for fax. It specifies the standard image sizes, two forms of image-data compression (encoding), the image-data format, and references, T.30 and the various modem standards. T.6 specifies a compression scheme that reduces the time required to transmit an image by roughly 50-percent. T.30 specifies the procedures that a sending and receiving terminal use to set up a fax call, determine the image size, encoding, and transfer speed, the demarcation between pages, and the termination of the call. T.30 also references the various modem standards. V.21, V.27ter, V.29, V.17, V.34: ITU modem standards used in facsimile. The first three were ratified prior to 1980, and were specified in the original T.4 and T.30 standards. V.34 was published for fax in 1994. T.37 The ITU standard for sending a fax-image file via e-mail to the intended recipient of a fax. G.711 pass through - this is where the T.30 fax call is carried in a VoIP call encoded as audio. This is sensitive to network packet loss, jitter and clock synchronization. When using voice high-compression encoding techniques such as, but not limited to, G.729, some fax tonal signa
MicroTCA
MicroTCA (short for Micro Telecommunications Computing Architecture, also: μTCA) is a modular, open standard, created and maintained by the PCI Industrial Computer Manufacturers Group (PICMG). It provides the electrical, mechanical, thermal and management specifications to create a switched fabric computer system, using Advanced Mezzanine Cards (AMC), connected directly to a backplane. MicroTCA is a descendant of the AdvancedTCA standard. == History == The rapid expansion of mobile telecommunications and their associated services (such as text messages) at the beginning of the millennium increased the demand of processing power in telecommunication systems. The existing "carrier grade" (see RAS) computing architectures were not fit to house the high performance processors of the time. In order to answer those demands, about 100 companies worked together in PICMG, resulting in the Advanced Telecommunications Architecture (AdvancedTCA, ATCA), published in 2002. After the introduction of AdvancedTCA, a standard was developed, to cater towards smaller telecommunications systems at the edge of the network. This standard was geared towards a more compact, less expensive systems, without cutting back on reliability or data throughput. This standard, called MicroTCA, was ratified 2006. MicroTCA systems migrated after its release into non-telecommunication sectors, like defence, avionics and science. This resulted in extensions to the base-standard, called modules. == Modules == === MicroTCA.0 === The base-specification for properties common to all other modules, ratified July 6, 2006. This includes: Mechanical specifications, like possible dimensions of card cages, backplanes and supported AMC-modules Electrical specifications, like power distribution and interface layout Thermal specifications, like possible cooling layouts or available cooling power Management specifications A second revision of the base-specifications was ratified January 16, 2020, containing some corrections, as well as alterations, necessary to implement higher speed Ethernet fabrics, like 10GBASE-KR and 40GBASE-KR4. === MicroTCA.1 === This module adds specifications for ruggedized systems, using forced air for cooling. Possible scenarios for MicroTCA.1-based systems include outside plant telecom, industrial and aerospace environments === MicroTCA.2 === This module adds specifications for more stringent requirements with regards to temperature, shock, vibration and other environmental conditions. These specifications are geared towards use in outside plant telecom, machine and transport industry, as well as military airborne, shipboard and ground mobile equipment. MicroTCA.2 allows the use of air- and conduction-cooled AMC-modules. === MicroTCA.3 === This module adds specifications for even more stringent requirements with regards to temperature, shock, vibration and other environmental conditions. These specifications are geared towards use in outside plant telecom, machine and transport industry, as well as military airborne, shipboard and ground mobile equipment. MicroTCA.3 requires the use of conduction-cooled AMC-modules. === MicroTCA.4 === This module extends the AMC with a Rear Transition Module (RTM), increasing PCB-space and modularity. AMC and RTM are connected with a connector, located in zone 3, defined in MicroTCA.0. These specifications are geared towards use in large-scale scientific devices, like particle accelerators or telescopes. == Components of MicroTCA == === Card Cage === The card cage (also: shelf, crate) houses all the other components and as such has two primary functions: Provide mechanical stability to the other components Ensure sufficient cooling There exist a wide array of card cages. They usually differ in: the type of modules they support (MTCA.0, MTCA.1, ...) the number of slots they provide (typically between 2 and 12) the architecture of the installed backplane (see below) the cooling scheme they use (i.e. airflow front-to-back, bottom-to-top, side-to-side, conductive,...) === Backplane === The backplane is a printed circuit board, mounted directly into the card cage. It connects all other components of a MicroTCA system to each other and provides power, data access and management access to them. Two types of power are distributed over the backplane, Management Power (+3.3 V) and Payload Power (+12 V). Unlike typical backplanes, where power is distributed to all components via a common "powerplane" in the PCB, on a MicroTCA backplane, Management and Payload Power are distributed to each component individually. While Management Power is provided to each module connected to a powered backplane, Payload Power has to be granted by the MicroTCA Carrier Hub (MCH), after ensuring that the module is MicroTCA-compatible. The standard defines various communication buses, which the backplane can/should provide: Gigabit Ethernet IPMI SATA Fat pipe (can be used for PCIe, SRIO or 10G/40G Ethernet) Point to Point Links Clocks JTAG === Cooling Unit === The Cooling Unit (CU) provides controlled air flow in air-flow-cooled card cages. It usually consists of an array of fans and a controller, which is connected to the backplane. The MicroTCA Carrier Hub (MCH) can read-out temperature sensors (if present) and fan speed, as well as change fan speed via IPMI. The Cooling Unit is usually fitted to a specific card cage. Some CUs are easily detachable (i.e. for cleaning or replacement), while other card cages come with integrated, non-detachable CUs. === Power Module === The Power Module (PM, also: Power Supply) converts the AC power from the power line to the +3.3 V Management Power (MP) and +12 V Payload Power (PP), both of which are DC. There exist a variety of power modules, which differ in: form factor (i.e. double width, single width) input voltage (110 V, 220 V, both) output power (i.e. 600 W, 1000 W) The power module senses the presence of a module in a slot via a specified pin in the module connector, and immediately provides that module with management power. Payload power is managed by the MicroTCA Carrier Hub (MCH), which communicates with the power module via IPMI. The power module uses its own type of connector, and can thus only be installed into designated slots, which in turn can't carry any other type of module. Some card cages provide an additional power module slot for redundancy. In such a case, one slot is the primary, which will provide power by default, and the other one is secondary, providing power only, if the primary does not. === MicroTCA Carrier Hub === The MicroTCA Carrier Hub (MCH) is the central managing device of a MicroTCA card cage. It manages power distribution and cooling. It usually also provides Gigabit Ethernet and/or PCIe/Serial RapidIO switching. Some MCHs additionally provide clocking. As the name indicates, they are the hub of various star topologies (i.e. for Ethernet, PCIe) on the backplane and thus require dedicated slot(s). Some backplanes support two MCHs for redundancy. In this case there are two MCH slots, with one being designated primary, and one secondary. === Advanced Mezzanine Card === Advanced Mezzanine Card (AMC) is a standard for hot-pluggable PCBs. It was originally developed to be used in AdvancedTCA systems. The standard specifies: the dimensions of the PCB with two width variants (single, double) and three height variants (Compact, Mid-size, Full) type, location and orientation of connectors (i.e. Zone 1, 2, 3) There is a huge variation of functionalities, an AMC can fulfill: Computing (i.e. a module with CPU, RAM, SSD and on-board graphics) Storage (i.e. SSD carrier) Graphics card FPGA card (i.e. for signal processing) FMC carrier Digitizer card (Analog-Digital and Digital-Analog Conversion) Clocking and Triggering and others === Rear Transition Module (MTCA.4 only) === The Rear Transition Module (RTM) was added in the MicroTCA.4 standard. It is connected directly to an AMC via a connector, located in zone 3, requiring a double width AMC and RTM. An RTM has about the same dimensions, as an AMC, basically doubling the available PCB-space per slot in an MTCA.4 card cage. Its power is provided by the AMC. Thus an RTM can not operate on its own, but requires a paired AMC. The zone 3 connector is electrically free configurable, making it possible, that a mechanically fitting AMC-RTM pair is electrically incompatible. To avoid damage due to that incompatibility, a mechanical code-pin was added to MTCA.4-compatible AMCs and RTMs, mechanically preventing the installation of an electrically incompatible RTM to an AMC. The functionality of RTMs includes, but is not limited to: RF-signal pre-/post-processing (i.e. filtering, Up-/Down-conversion, Vector De-/Modulation) Digital signal pre-/post-processing Clock-generation/-distribution Device interfaces Date storage CPU (only MCH-RTM)
Situated
In artificial intelligence and cognitive science, the term situated refers to an agent which is embedded in an environment. The term situated is commonly used to refer to robots, but some researchers argue that software agents can also be situated if: they exist in a dynamic (rapidly changing) environment, which they can manipulate or change through their actions, and which they can sense or perceive. Examples might include web-based agents, which can alter data or trigger processes (such as purchases) over the internet, or virtual-reality bots which inhabit and change virtual worlds, such as Second Life. Being situated is generally considered to be part of being embodied, but it is useful to consider each perspective individually. The situated perspective emphasizes that intelligent behaviour derives from the environment and the agent's interactions with it. The nature of these interactions are defined by an agent's embodiment.
Digital inclusion
Digital inclusion involves the activities necessary to ensure equitable access to and use of information and communications technologies for participation in social and economic life including for education, social services, health, social, and community participation. Digital inclusion includes access to affordable broadband Internet services, Internet-enabled devices, access to digital literacy training, quality technical support, and applications and online content designed to enable and encourage self-sufficiency, participation, and collaboration. Related concepts include digital divide, digital exclusion and digital inequality, however digital inclusion focuses more on the strategies, policies, and programs required to address the digital divide. As many services have moved online and with the increasing use of telehealth to deliver primary care, particularly during the COVID-19 pandemic in 2020, digital inclusion, including digital literacy and internet access is increasingly regarded as a social determinant of health. Accessibility, relevance, and impact have been identified as essential elements of digital inclusion as it pertains to health information systems. "Digital inclusion is broadly defined as different strategies designed to ensure that all people have equal access, opportunities and skills to benefit from digital technologies and systems" (ITU, 2019, as cited in Carmi and Yates, 2020). Since 2020, there have been many technology companies that have begun implementing different features or roles within their companies to support breaking down the digital divide. For example, HP has announced the digital divide accelerator. This accelerator will support nonprofits in Greece, Indonesia, Nigeria, and Spain. The goal for this role is to help equip children and other people within the community to understand the skills needed to become a part of the digital community. == Background == With the increasing use of computers and the Internet in the 1990s and early 2000s concerns rose around digital equality, however this primarily focused on the physical access to technology. This gave rise to the concept of the digital divide which was originally developed to describe the growing disparity in Internet access between rural and urban areas of the United States of America. This gradually expanded to considerations of digital access between countries in what is termed the global digital divide, which mirrors many of the disparities seen within countries but on an international scale. However, with the adoption of digital technologies across most sectors of society, and the increasing diversity of technologies and programs, access and use of ICT became more complex and essential for many aspects of daily life. This led to new terminology and a second wave of research on digital inequality which has been identified as the (1) usage gap, (2) second level digital divide, (3) emerging digital differentiation, and (4) digital inclusion. == Strategies for digital inclusion == A review of the literature in 2019 found that while physical access to digital technologies and the internet continues to be a barrier to digital inclusion, digital ability and attitude were also potential barriers. Key strategies identified for improving digital inclusion are social support, direct user experience and collaborative learning/design. Education is a key aspect of digital inclusion as digital technologies have become a key means of engaging with all levels of the education system, requiring levels of digital competence for successful engagement with the curriculum. In addition lifelong learning is required as technologies, services and systems are changing constantly. Public libraries and community service providers play a key role in supporting digital inclusion through access to computers, internet connection and expertise and training. Designing for digital inclusion may also help with poor written literacy, which remains a barrier for 10% of the world's population. UNESCO has developed Guidelines for designing digital technologies in ways that could assist those who are illiterate. == Indigenous digital inclusion == Digital inclusion is a critical issue for many Indigenous communities across the globe, many of whom lack access to adequate resources. The Australian Government has set a National Closing the Gap target for Aboriginal and Torres Strait Islander people to have equal levels of digital inclusion by 2026. Many people on tribal land and in Native Hawaiian land struggle with the technology gap. The Native Entities Capacity and Planning Grant Program has $45.3 million available to help address these challenges and empower Indian Tribes, Alaska Native entities, and Native Hawaiian organizations. Some of the impacts so far are in the education and workforce development and healthcare access through telehealth.[13] == Measuring digital inclusion == The Australian Digital Inclusion Index (ADII) is a research project which has been tracking digital inclusion throughout Australia since 2016. It uses survey data to measure digital inclusion across three dimensions of access, affordability and digital ability. == The Future of Digital Inclusion == On February 16, 2021, a global dialogue within the United Nations (UN) took a look at the future of digital inclusion. Through the adoption of the 2030 UN Agenda for Sustainable Development, Member States made a commitment. They pledged to "leave no one behind." By 2030, the UN's goal is to close the digital divide by providing access to the Internet and mobile technologies for all nations and peoples and for all segments of society. The UN sees the crisis of too many people in our global society still living unconnected and how the digital divide remains a challenge that must be addressed. == Gaming == The Xbox Adaptive Controller is a groundbreaking example of digital inclusion, designed to make gaming more accessible to people with limited mobility. Developed by Microsoft, it features large programmable buttons and ports that connect to a wide range of external devices like switches, joysticks, and mounts, allowing users to customize their gaming experience based on their unique needs. By removing traditional physical barriers to gameplay, the Xbox Adaptive Controller empowers more people to participate in digital entertainment, promotes equal access to technology, and fosters a more inclusive gaming community. == Digital inclusion advocacy groups == Australian Digital Inclusion Alliance National Digital Inclusion Alliance (US)