AI Tools

AI Tools — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Double descent

    Double descent

    Double descent in statistics and machine learning is the phenomenon where a model's error rate on the test set initially decreases with the number of parameters, then peaks, then decreases again. This phenomenon has been considered surprising, as it contradicts assumptions about overfitting in classical machine learning. The increase usually occurs near the interpolation threshold, where the number of parameters is the same as the number of training data points (the model is just large enough to fit the training data). Or, more precisely, it is the maximum number of samples on which the model/training procedure achieves approximately on average 0 training error. == History == Early observations of what would later be called double descent in specific models date back to 1989. The term "double descent" was coined by Belkin et. al. in 2019, when the phenomenon gained popularity as a broader concept exhibited by many models. The latter development was prompted by a perceived contradiction between the conventional wisdom that too many parameters in the model result in a significant overfitting error (an extrapolation of the bias–variance tradeoff), and the empirical observations in the 2010s that some modern machine learning techniques tend to perform better with larger models. == Theoretical models == Double descent occurs in linear regression with isotropic Gaussian covariates and isotropic Gaussian noise. A model of double descent at the thermodynamic limit has been analyzed using the replica trick, and the result has been confirmed numerically. A number of works have suggested that double descent can be explained using the concept of effective dimension: While a network may have a large number of parameters, in practice only a subset of those parameters are relevant for generalization performance, as measured by the local Hessian curvature. This explanation is formalized through PAC-Bayes compression-based generalization bounds, which show that less complex models are expected to generalize better under a Solomonoff prior.

    Read more →
  • Dynamic epistemic logic

    Dynamic epistemic logic

    Dynamic epistemic logic (DEL) is a logical framework dealing with knowledge and information change. Typically, DEL focuses on situations involving multiple agents and studies how their knowledge changes when events occur. These events can change factual properties of the actual world (they are called ontic events): for example a red card is painted in blue. They can also bring about changes of knowledge without changing factual properties of the world (they are called epistemic events): for example, a card is revealed publicly (or privately) to be red. Originally, DEL focused on epistemic events. Only some of the basic ideas are present in this entry of the original DEL framework; more details about DEL in general can be found in the references. Due to the nature of its object of study and its abstract approach, DEL is related and has applications to numerous research areas, such as computer science (artificial intelligence), philosophy (formal epistemology), economics (game theory) and cognitive science. In computer science, DEL is for example very much related to multi-agent systems, which are systems where multiple intelligent agents interact and exchange information. As a combination of dynamic logic and epistemic logic, dynamic epistemic logic is a young field of research. It really started in 1989 with Plaza's logic of public announcement. Independently, Gerbrandy and Groeneveld proposed a system dealing moreover with private announcement and that was inspired by the work of Veltman. Another system was proposed by van Ditmarsch whose main inspiration was the Cluedo game. But the most influential and original system was the system proposed by Baltag, Moss and Solecki. This system can deal with all the types of situations studied in the works above and its underlying methodology is conceptually grounded. This entry will present some of its basic ideas. Formally, DEL extends ordinary epistemic logic by the inclusion of event models to describe actions, and a product update operator that defines how epistemic models are updated as the consequence of executing actions described through event models. Epistemic logic will first be recalled. Then, actions and events will enter into the picture and we will introduce the DEL framework. == Epistemic logic == Epistemic logic is a modal logic dealing with the notions of knowledge and belief. As a logic, it is concerned with understanding the process of reasoning about knowledge and belief: which principles relating the notions of knowledge and belief are intuitively plausible? Like epistemology, it stems from the Greek word ϵ π ι σ τ η μ η {\displaystyle \epsilon \pi \iota \sigma \tau \eta \mu \eta } or ‘episteme’ meaning knowledge. Epistemology is nevertheless more concerned with analyzing the very nature and scope of knowledge, addressing questions such as “What is the definition of knowledge?” or “How is knowledge acquired?”. In fact, epistemic logic grew out of epistemology in the Middle Ages thanks to the efforts of Burley and Ockham. The formal work, based on modal logic, that inaugurated contemporary research into epistemic logic dates back only to 1962 and is due to Hintikka. It then sparked in the 1960s discussions about the principles of knowledge and belief and many axioms for these notions were proposed and discussed. For example, the interaction axioms K p → B p {\displaystyle Kp\rightarrow Bp} and B p → K B p {\displaystyle Bp\rightarrow KBp} are often considered to be intuitive principles: if an agent Knows p {\displaystyle p} then (s)he also Believes p {\displaystyle p} , or if an agent Believes p {\displaystyle p} , then (s)he Knows that (s)he Believes p {\displaystyle p} . More recently, these kinds of philosophical theories were taken up by researchers in economics, artificial intelligence and theoretical computer science where reasoning about knowledge is a central topic. Due to the new setting in which epistemic logic was used, new perspectives and new features such as computability issues were then added to the research agenda of epistemic logic. === Syntax === In the sequel, A G T S = { 1 , … , n } {\displaystyle AGTS=\{1,\ldots ,n\}} is a finite set whose elements are called agents and P R O P {\displaystyle PROP} is a set of propositional letters. The epistemic language is an extension of the basic multi-modal language of modal logic with a common knowledge operator C A {\displaystyle C_{A}} and a distributed knowledge operator D A {\displaystyle D_{A}} . Formally, the epistemic language L EL C {\displaystyle {\mathcal {L}}_{\textsf {EL}}^{C}} is defined inductively by the following grammar in BNF: L EL C : ϕ ::= p ∣ ¬ ϕ ∣ ( ϕ ∧ ϕ ) ∣ K j ϕ ∣ C A ϕ ∣ D A ϕ {\displaystyle {\mathcal {L}}_{\textsf {EL}}^{C}:\phi ~~::=~~p~\mid ~\neg \phi ~\mid ~(\phi \land \phi )~\mid ~K_{j}\phi ~\mid ~C_{A}\phi ~\mid ~D_{A}\phi } where p ∈ P R O P {\displaystyle p\in PROP} , j ∈ A G T S {\displaystyle j\in {AGTS}} and A ⊆ A G T S {\displaystyle A\subseteq {AGTS}} . The basic epistemic language L E L {\displaystyle {\mathcal {L}}_{EL}} is the language L E L C {\displaystyle {\mathcal {L}}_{EL}^{C}} without the common knowledge and distributed knowledge operators. The formula ⊥ {\displaystyle \bot } is an abbreviation for ¬ p ∧ p {\displaystyle \neg p\land p} (for a given p ∈ P R O P {\displaystyle p\in PROP} ), ⟨ K j ⟩ ϕ {\displaystyle \langle K_{j}\rangle \phi } is an abbreviation for ¬ K j ¬ ϕ {\displaystyle \neg K_{j}\neg \phi } , E A ϕ {\displaystyle E_{A}\phi } is an abbreviation for ⋀ j ∈ A K j ϕ {\displaystyle \bigwedge \limits _{j\in A}K_{j}\phi } and C ϕ {\displaystyle C\phi } an abbreviation for C A G T S ϕ {\displaystyle C_{AGTS}\phi } . Group notions: general, common and distributed knowledge. In a multi-agent setting there are three important epistemic concepts: general knowledge, distributed knowledge and common knowledge. The notion of common knowledge was first studied by Lewis in the context of conventions. It was then applied to distributed systems and to game theory, where it allows to express that the rationality of the players, the rules of the game and the set of players are commonly known. General knowledge. General knowledge of ϕ {\displaystyle \phi } means that everybody in the group of agents A G T S {\displaystyle {AGTS}} knows that ϕ {\displaystyle \phi } . Formally, this corresponds to the following formula: E ϕ := ⋀ j ∈ A G T S K j ϕ . {\displaystyle E\phi :={\underset {j\in {AGTS}}{\bigwedge }}K_{j}\phi .} Common knowledge. Common knowledge of ϕ {\displaystyle \phi } means that everybody knows ϕ {\displaystyle \phi } but also that everybody knows that everybody knows ϕ {\displaystyle \phi } , that everybody knows that everybody knows that everybody knows ϕ {\displaystyle \phi } , and so on ad infinitum. Formally, this corresponds to the following formula C ϕ := E ϕ ∧ E E ϕ ∧ E E E ϕ ∧ … {\displaystyle C\phi :=E\phi \land EE\phi \land EEE\phi \land \ldots } As we do not allow infinite conjunction the notion of common knowledge will have to be introduced as a primitive in our language. Before defining the language with this new operator, we are going to give an example introduced by Lewis that illustrates the difference between the notions of general knowledge and common knowledge. Lewis wanted to know what kind of knowledge is needed so that the statement p {\displaystyle p} : “every driver must drive on the right” be a convention among a group of agents. In other words, he wanted to know what kind of knowledge is needed so that everybody feels safe to drive on the right. Suppose there are only two agents i {\displaystyle i} and j {\displaystyle j} . Then everybody knowing p {\displaystyle p} (formally E p {\displaystyle Ep} ) is not enough. Indeed, it might still be possible that the agent i {\displaystyle i} considers possible that the agent j {\displaystyle j} does not know p {\displaystyle p} (formally ¬ K i K j p {\displaystyle \neg K_{i}K_{j}p} ). In that case the agent i {\displaystyle i} will not feel safe to drive on the right because he might consider that the agent j {\displaystyle j} , not knowing p {\displaystyle p} , could drive on the left. To avoid this problem, we could then assume that everybody knows that everybody knows that p {\displaystyle p} (formally E E p {\displaystyle EEp} ). This is again not enough to ensure that everybody feels safe to drive on the right. Indeed, it might still be possible that agent i {\displaystyle i} considers possible that agent j {\displaystyle j} considers possible that agent i {\displaystyle i} does not know p {\displaystyle p} (formally ¬ K i K j K i p {\displaystyle \neg K_{i}K_{j}K_{i}p} ). In that case and from i {\displaystyle i} ’s point of view, j {\displaystyle j} considers possible that i {\displaystyle i} , not knowing p {\displaystyle p} , will drive on the left. So from i {\displaystyle i} ’s point of view, j {\displaystyle j} might drive on the left as well (by the same argument as abov

    Read more →
  • Self-management (computer science)

    Self-management (computer science)

    Self-management is the process by which computer systems manage their own operation without human intervention. Self-management technologies are expected to pervade the next generation of network management systems. The growing complexity of modern networked computer systems is a limiting factor in their expansion. The increasing heterogeneity of corporate computer systems, the inclusion of mobile computing devices, and the combination of different networking technologies like WLAN, cellular phone networks, and mobile ad hoc networks make the conventional, manual management difficult, time-consuming, and error-prone. More recently, self-management has been suggested as a solution to increasing complexity in cloud computing. An industrial initiative towards realizing self-management is the Autonomic Computing Initiative (ACI) started by IBM in 2001. The ACI defines the following four functional areas: Self-configuration Auto-configuration of components Self-healing Automatic discovery, and correction of faults; automatically applying all necessary actions to bring system back to normal operation Self-optimization Automatic monitoring and control of resources to ensure the optimal functioning with respect to the defined requirements Self-protection Proactive identification and protection from arbitrary attacks

    Read more →
  • Intelligent decision support system

    Intelligent decision support system

    An intelligent decision support system (IDSS) is a decision support system that makes extensive use of artificial intelligence (AI) techniques. Use of AI techniques in management information systems has a long history – indeed terms such as "Knowledge-based systems" (KBS) and "intelligent systems" have been used since the early 1980s to describe components of management systems, but the term "Intelligent decision support system" is thought to originate with Clyde Holsapple and Andrew Whinston in the late 1970s. Examples of specialized intelligent decision support systems include Flexible manufacturing systems (FMS), intelligent marketing decision support systems and medical diagnosis systems. Ideally, an intelligent decision support system should behave like a human consultant: supporting decision makers by gathering and analysing evidence, identifying and diagnosing problems, proposing possible courses of action and evaluating such proposed actions. The aim of the AI techniques embedded in an intelligent decision support system is to enable these tasks to be performed by a computer, while emulating human capabilities as closely as possible. Many IDSS implementations are based on expert systems, a well established type of KBS that encode knowledge and emulate the cognitive behaviours of human experts using predicate logic rules, and have been shown to perform better than the original human experts in some circumstances. Expert systems emerged as practical applications in the 1980s based on research in artificial intelligence performed during the late 1960s and early 1970s. They typically combine knowledge of a particular application domain with an inference capability to enable the system to propose decisions or diagnoses. Accuracy and consistency can be comparable to (or even exceed) that of human experts when the decision parameters are well known (e.g. if a common disease is being diagnosed), but performance can be poor when novel or uncertain circumstances arise. Research in AI focused on enabling systems to respond to novelty and uncertainty in more flexible ways is starting to be used in IDSS. For example, intelligent agents that perform complex cognitive tasks without any need for human intervention have been used in a range of decision support applications. Capabilities of these intelligent agents include knowledge sharing, machine learning, data mining, and automated inference. A range of AI techniques such as case based reasoning, rough sets and fuzzy logic have also been used to enable decision support systems to perform better in uncertain conditions. A 2009 research about a multi-artificial system intelligence system named IILS is proposed to automate problem-solving processes within the logistics industry. The system involves integrating intelligence modules based on case-based reasoning, multi-agent systems, fuzzy logic, and artificial neural networks aiming to offer advanced logistics solutions and support in making well-informed, high-quality decisions to address a wide range of customer needs and challenges.

    Read more →
  • Co-occurrence matrix

    Co-occurrence matrix

    A co-occurrence matrix or co-occurrence distribution (also referred to as : gray-level co-occurrence matrices GLCMs) is a matrix that is defined over an image to be the distribution of co-occurring pixel values (grayscale values, or colors) at a given offset. It is used as an approach to texture analysis with various applications especially in medical image analysis. == Method == Given a grey-level image I {\displaystyle I} , co-occurrence matrix computes how often pairs of pixels with a specific value and offset occur in the image. The offset, ( Δ x , Δ y ) {\displaystyle (\Delta x,\Delta y)} , is a position operator that can be applied to any pixel in the image (ignoring edge effects): for instance, ( 1 , 2 ) {\displaystyle (1,2)} could indicate "one down, two right". An image with p {\displaystyle p} different pixel values will produce a p × p {\displaystyle p\times p} co-occurrence matrix, for the given offset. The ( i , j ) th {\displaystyle (i,j)^{\text{th}}} value of the co-occurrence matrix gives the number of times in the image that the i th {\displaystyle i^{\text{th}}} and j th {\displaystyle j^{\text{th}}} pixel values occur in the relation given by the offset. For an image with p {\displaystyle p} different pixel values, the p × p {\displaystyle p\times p} co-occurrence matrix C is defined over an n × m {\displaystyle n\times m} image I {\displaystyle I} , parameterized by an offset ( Δ x , Δ y ) {\displaystyle (\Delta x,\Delta y)} , as: C Δ x , Δ y ( i , j ) = ∑ x = 1 n ∑ y = 1 m { 1 , if I ( x , y ) = i and I ( x + Δ x , y + Δ y ) = j 0 , otherwise {\displaystyle C_{\Delta x,\Delta y}(i,j)=\sum _{x=1}^{n}\sum _{y=1}^{m}{\begin{cases}1,&{\text{if }}I(x,y)=i{\text{ and }}I(x+\Delta x,y+\Delta y)=j\\0,&{\text{otherwise}}\end{cases}}} where: i {\displaystyle i} and j {\displaystyle j} are the pixel values; x {\displaystyle x} and y {\displaystyle y} are the spatial positions in the image I; the offsets ( Δ x , Δ y ) {\displaystyle (\Delta x,\Delta y)} define the spatial relation for which this matrix is calculated; and I ( x , y ) {\displaystyle I(x,y)} indicates the pixel value at pixel ( x , y ) {\displaystyle (x,y)} . The 'value' of the image originally referred to the grayscale value of the specified pixel, but could be anything, from a binary on/off value to 32-bit color and beyond. (Note that 32-bit color will yield a 232 × 232 co-occurrence matrix!) Co-occurrence matrices can also be parameterized in terms of a distance, d {\displaystyle d} , and an angle, θ {\displaystyle \theta } , instead of an offset ( Δ x , Δ y ) {\displaystyle (\Delta x,\Delta y)} . Any matrix or pair of matrices can be used to generate a co-occurrence matrix, though their most common application has been in measuring texture in images, so the typical definition, as above, assumes that the matrix is an image. It is also possible to define the matrix across two different images. Such a matrix can then be used for color mapping. == Aliases == Co-occurrence matrices are also referred to as: GLCMs (gray-level co-occurrence matrices) GLCHs (gray-level co-occurrence histograms) spatial dependence matrices == Application to image analysis == Whether considering the intensity or grayscale values of the image or various dimensions of color, the co-occurrence matrix can measure the texture of the image. Because co-occurrence matrices are typically large and sparse, various metrics of the matrix are often taken to get a more useful set of features. Features generated using this technique are usually called Haralick features, after Robert Haralick. Texture analysis is often concerned with detecting aspects of an image that are rotationally invariant. To approximate this, the co-occurrence matrices corresponding to the same relation, but rotated at various regular angles (e.g. 0, 45, 90, and 135 degrees), are often calculated and summed. Texture measures like the co-occurrence matrix, wavelet transforms, and model fitting have found application in medical image analysis in particular. == Other applications == Co-occurrence matrices are also used for words processing in natural language processing (NLP).

    Read more →
  • Alexander Y. Tetelbaum

    Alexander Y. Tetelbaum

    Alexander Y. Tetelbaum (born August 16, 1948) is a Ukrainian American computer scientist, inventor, and academic who has contributed to electronic design automation (EDA) and artificial intelligence (AI) since the late 1960s; and holds 46 U.S. patents in EDA and related fields. Tetelbaum is the founding president of International Solomon University, the first Jewish university in Ukraine, established during a period of renewed efforts to address antisemitism in Ukraine. == Early life and education == He graduated from a Kyiv mathematical high school with a silver medal in 1966. Tetelbaum enrolled at the Kyiv Polytechnic Institute (KPI), now National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute" in 1966, graduating in 1972 with an MS in Electronics with honors. He earned his PhD in Electrical and Computer Engineering from KPI in 1975, with a dissertation on electronic design automation, and his Doctor of Engineering Science in 1986. == Academic career == Tetelbaum began his academic career at KPI in 1973 as a junior scientist, becoming a professor in the Computer and Electrical Engineering Department in 1980. Later, he founded and served as president of International Solomon University in Kyiv from 1991 to 1996, the first Jewish university in Ukraine. The university became a major academic center for computer science and Jewish studies in the post-Soviet era. He was a visiting and adjunct professor at Michigan State University from 1993 to 1996. == Professional career == Tetelbaum worked as an engineer at the Kiev Institute of Cybernetics from 1972 to 1973, and later, he led the Design Automation Lab at Kyiv Polytechnic Institute from 1975 to 1987. In the United States, he served as EDA manager at Silicon Graphics Corporation from 1996 to 1998 and principal engineer at LSI Corporation from 1998 to 2012. He founded and served as CEO of Abelite Design Automation, Inc., from 2012 to 2022. == Contributions in computer science == Tetelbaum has contributed to electronic design automation (EDA) and artificial intelligence (AI) since the 1960s. His early work included methods for EDA, particularly physical design automation and mathematical optimization; and he developed force-directed placement and topological routing methods. Tetelbaum generalized Rent's rule for hierarchical systems and large blocks, proposing a graph-based framework that extends applicability to arbitrary partition sizes with improved accuracy. Additional IEEE and related conference contributions from the mid-1990s include: "Path Search for Complicated Function", 1995 IEEE International Symposium on Circuits and Systems "A Performance-driven Placement Approach of Standard Cells" (International Conference on Intelligent Systems, 1995) "Framework of a New Methodology for Behavioral to Physical Design Linkage" (38th Midwest Symposium on Circuits and Systems, 1996) Statistical timing design and variations Test Methodologies These and other works and patents contributed to timing-driven placement, crosstalk reduction, clock tree synthesis, and interconnect optimization in VLSI design. == Patents == Tetelbaum holds 46 U.S. patents in EDA and related fields. Notable examples include: For the full list of patents, see Justia Patents or Google Patents. == Publications == === Early publications in the Soviet Union === Before the appearance of American books on electronic design automation (EDA), Tetelbaum published several scientific books and monographs on the subject in Russian/Ukrainian. Electronic Design Automation, Kiev: Znanie Publisher, 1975. Planar Design of Electronic Circuits, Kiev: Znanie Publisher, 1977. Formal Design of Computer Systems, Moscow: Sovetskoe Radio, 1979. CAD of Electronic Equipment: Topological Approach, Kiev: Vyssha Shkola, 1980; 2nd ed. 1981. Automated Design of Electronic Circuits (1981) CAD of VLSI Circuits, Kiev: Vyssha Shkola, 1983. Topological Algorithms of Multilayer Printed Circuit Boards Routing, Moscow: Radio i Svyaz, 1983. CAD of VLSI Circuits on Master Slice Chips, Moscow: Radio i Svyaz, 1988. Increasing the Effectiveness of CAD Systems, Kiev: UMKVO, 1991. === Scientific Monographs (English) === Minimum Number of Timing Signoff Corners (2022) Interviewing AI (2026) The AI Debate (2026) New Nostradamus Predictions: 2026: The Next Decade & Beyond (2035–2050+) (2026) For a consolidated record of Tetelbaum's publications, see Alexander Y. Tetelbaum, Wikidata Q4720205. === Other publications === Tetelbaum also published educational books on problem-solving methods: Yes-No Puzzles-Games Puzzle Games for Kids Solving Non-Standard Problems Solving Non-Standard Very Hard Problems Additionally, Tetelbaum published three thrillers: Omerta Operations Executive Director Eruption Yacht Finally, he published his memoir and an entertaining book: Unfinished Equations Artificially Intelligent Humor

    Read more →
  • Feature engineering

    Feature engineering

    Feature engineering is a preprocessing step in supervised machine learning and statistical modeling which transforms raw data into a more effective set of inputs. Each input comprises several attributes, known as features. By providing models with relevant information, feature engineering significantly enhances their predictive accuracy and decision-making capability. Beyond machine learning, the principles of feature engineering are applied in various scientific fields, including physics. For example, physicists construct dimensionless numbers such as the Reynolds number in fluid dynamics, the Nusselt number in heat transfer, and the Archimedes number in sedimentation. They also develop first approximations of solutions, such as analytical solutions for the strength of materials in mechanics. == Clustering == One of the applications of feature engineering has been clustering of feature-objects or sample-objects in a dataset. Especially, feature engineering based on matrix decomposition has been extensively used for data clustering under non-negativity constraints on the feature coefficients. These include Non-Negative Matrix Factorization (NMF), Non-Negative Matrix-Tri Factorization (NMTF), Non-Negative Tensor Decomposition/Factorization (NTF/NTD), etc. The non-negativity constraints on coefficients of the feature vectors mined by the above-stated algorithms yields a part-based representation, and different factor matrices exhibit natural clustering properties. Several extensions of the above-stated feature engineering methods have been reported in literature, including orthogonality-constrained factorization for hard clustering, and manifold learning to overcome inherent issues with these algorithms. Other classes of feature engineering algorithms include leveraging a common hidden structure across multiple inter-related datasets to obtain a consensus (common) clustering scheme. An example is Multi-view Classification based on Consensus Matrix Decomposition (MCMD), which mines a common clustering scheme across multiple datasets. MCMD is designed to output two types of class labels (scale-variant and scale-invariant clustering), and: is computationally robust to missing information, can obtain shape- and scale-based outliers, and can handle high-dimensional data effectively. Coupled matrix and tensor decompositions are popular in multi-view feature engineering. == Predictive modelling == Feature engineering in machine learning and statistical modeling involves selecting, creating, transforming, and extracting data features. Key components include feature creation from existing data, transforming and imputing missing or invalid features, reducing data dimensionality through methods like Principal Components Analysis (PCA), Independent Component Analysis (ICA), and Linear Discriminant Analysis (LDA), and selecting the most relevant features for model training based on importance scores and correlation matrices. Features vary in significance. Even relatively insignificant features may contribute to a model. Feature selection can reduce the number of features to prevent a model from becoming too specific to the training data set (overfitting). Feature explosion occurs when the number of identified features is too large for effective model estimation or optimization. Common causes include: Feature templates - implementing feature templates instead of coding new features Feature combinations - combinations that cannot be represented by a linear system Feature explosion can be limited via techniques such as regularization, kernel methods, and feature selection. == Automation == Automation of feature engineering is a research topic that dates back to the 1990s. Machine learning software that incorporates automated feature engineering has been commercially available since 2016. Related academic literature can be roughly separated into two types: Multi-relational Decision Tree Learning (MRDTL) uses a supervised algorithm that is similar to a decision tree. Deep Feature Synthesis uses simpler methods. === Multi-relational Decision Tree Learning (MRDTL) === Multi-relational Decision Tree Learning (MRDTL) extends traditional decision tree methods to relational databases, handling complex data relationships across tables. It innovatively uses selection graphs as decision nodes, refined systematically until a specific termination criterion is reached. Most MRDTL studies base implementations on relational databases, which results in many redundant operations. These redundancies can be reduced by using techniques such as tuple id propagation. === Open-source implementations === There are a number of open-source libraries and tools that automate feature engineering on relational data and time series: featuretools is a Python library for transforming time series and relational data into feature matrices for machine learning. MCMD: An open-source feature engineering algorithm for joint clustering of multiple datasets. OneBM or One-Button Machine combines feature transformations and feature selection on relational data with feature selection techniques. OneBM helps data scientists reduce data exploration time allowing them to try and error many ideas in short time. On the other hand, it enables non-experts, who are not familiar with data science, to quickly extract value from their data with a little effort, time, and cost. getML community is an open source tool for automated feature engineering on time series and relational data. It is implemented in C/C++ with a Python interface. It has been shown to be at least 60 times faster than tsflex, tsfresh, tsfel, featuretools or kats. tsfresh is a Python library for feature extraction on time series data. It evaluates the quality of the features using hypothesis testing. tsflex is an open source Python library for extracting features from time series data. Despite being 100% written in Python, it has been shown to be faster and more memory efficient than tsfresh, seglearn or tsfel. seglearn is an extension for multivariate, sequential time series data to the scikit-learn Python library. tsfel is a Python package for feature extraction on time series data. kats is a Python toolkit for analyzing time series data. === Deep feature synthesis === The deep feature synthesis (DFS) algorithm beat 615 of 906 human teams in a competition. == Feature stores == The feature store is where the features are stored and organized for the explicit purpose of being used to either train models (by data scientists) or make predictions (by applications that have a trained model). It is a central location where you can either create or update groups of features created from multiple different data sources, or create and update new datasets from those feature groups for training models or for use in applications that do not want to compute the features but just retrieve them when it needs them to make predictions. A feature store includes the ability to store code used to generate features, apply the code to raw data, and serve those features to models upon request. Useful capabilities include feature versioning and policies governing the circumstances under which features can be used. Feature stores can be standalone software tools or built into machine learning platforms. == Alternatives == Feature engineering can be a time-consuming and error-prone process, as it requires domain expertise and often involves trial and error. Deep learning algorithms may be used to process a large raw dataset without having to resort to feature engineering. However, deep learning algorithms still require careful preprocessing and cleaning of the input data. In addition, choosing the right architecture, hyperparameters, and optimization algorithm for a deep neural network can be a challenging and iterative process.

    Read more →
  • Commonsense knowledge (artificial intelligence)

    Commonsense knowledge (artificial intelligence)

    In artificial intelligence research, commonsense knowledge consists of facts about the everyday world, such as "Lemons are sour" or "Cows say moo", that all humans are expected to know. It is currently an unsolved problem in artificial general intelligence. The first AI program to address common sense knowledge was Advice Taker in 1959 by John McCarthy. Commonsense knowledge can underpin a commonsense reasoning process, to attempt inferences such as "You might bake a cake because you want people to eat the cake." A natural language processing process can be attached to the commonsense knowledge base to allow the knowledge base to attempt to answer questions about the world. Common sense knowledge also helps to solve problems in the face of incomplete information. Using widely held beliefs about everyday objects, or common sense knowledge, AI systems make common sense assumptions or default assumptions about the unknown similar to the way people do. In an AI system or in English, this is expressed as "Normally P holds", "Usually P" or "Typically P so Assume P". For example, if we know the fact "Tweety is a bird", because we know the commonly held belief about birds, "typically birds fly," without knowing anything else about Tweety, we may reasonably assume the fact that "Tweety can fly." As more knowledge of the world is discovered or learned over time, the AI system can revise its assumptions about Tweety using a truth maintenance process. If we later learn that "Tweety is a penguin" then truth maintenance revises this assumption because we also know "penguins do not fly". == Commonsense reasoning == Commonsense reasoning simulates the human ability to use commonsense knowledge to make presumptions about the type and essence of ordinary situations they encounter every day, and to change their "minds" should new information come to light. This includes time, missing or incomplete information and cause and effect. The ability to explain cause and effect is an important aspect of explainable AI. Truth maintenance algorithms automatically provide an explanation facility because they create elaborate records of presumptions. Compared with humans, all existing computer programs that attempt human-level AI perform extremely poorly on modern "commonsense reasoning" benchmark tests such as the Winograd Schema Challenge. The problem of attaining human-level competency at "commonsense knowledge" tasks is considered to probably be "AI complete" (that is, solving it would require the ability to synthesize a fully human-level intelligence), although some oppose this notion and believe compassionate intelligence is also required for human-level AI. Common sense reasoning has been applied successfully in more limited domains such as natural language processing and automated diagnosis or analysis. == Commonsense knowledge base construction == Compiling comprehensive knowledge bases of commonsense assertions (CSKBs) is a long-standing challenge in AI research. From early expert-driven efforts like CYC and WordNet, significant advances were achieved via the crowdsourced OpenMind Commonsense project, which led to the crowdsourced ConceptNet KB. Several approaches have attempted to automate CSKB construction, most notably, via text mining (WebChild, Quasimodo, TransOMCS, Ascent), as well as harvesting these directly from pre-trained language models (AutoTOMIC). These resources are significantly larger than ConceptNet, though the automated construction mostly makes them of moderately lower quality. Challenges also remain on the representation of commonsense knowledge: Most CSKB projects follow a triple data model, which is not necessarily best suited for breaking more complex natural language assertions. A notable exception here is GenericsKB, which applies no further normalization to sentences, but retains them in full. == Applications == Around 2013, MIT researchers developed BullySpace, an extension of the commonsense knowledgebase ConceptNet, to catch taunting social media comments. BullySpace included over 200 semantic assertions based around stereotypes, to help the system infer that comments like "Put on a wig and lipstick and be who you really are" are more likely to be an insult if directed at a boy than a girl. ConceptNet has also been used by chatbots and by computers that compose original fiction. At Lawrence Livermore National Laboratory, common sense knowledge was used in an intelligent software agent to detect violations of a comprehensive nuclear test ban treaty. == Data == As an example, as of 2012 ConceptNet includes these 21 language-independent relations: IsA (An "RV" is a "vehicle" | X is an instance of a Y) UsedFor (a "cake tin" is used for "making cakes" | X is used for the purpose Y) HasA (A "rabbit" has a "tail" | X possesses Y element or feature) CapableOf (a "cook" is capable of "making baked goods" | X is capable of doing Y) Desires (a "child" desires "the aroma of baking" | X has a desire for Y) CreatedBy ("cake" is created by a "baker" | X is created by Y) PartOf (a "knife" is be part of a "knife set" | X is a part of Y) Causes ("Heat" causes "cooking"| X is what causes Y) LocatedNear (the "oven" is located near the "refrigerator" | X is located near Y) AtLocation (Somewhere a "Cook" can be at a "restaurant" | X is at the location of Y) DefinedAs (a "Cupcake" is defined as a "cake" that also has the qualities of being "small", "baked within a wrapper", and "containing only one area of frosting or icing" | X is defined as Y that also has the properties A, B & C) SymbolOf (a "heart" is a symbol of "affection" | X is a symbolic representation of Y) ReceivesAction ("cake" can receive the action of being "eaten" | X is capable of receiving action Y) HasPrerequisite ("baking" has the prerequisite of obtaining the "ingredients" | X cannot do Y unless A does B) MotivatedByGoal ("baking" is motivated by the goal of "consumption"/"eating" | X has the motivation of Y goal) CausesDesire ("baking" makesYou want to "follow recipe" | X causes the desire to do Y) MadeOf ("Cake" is made of "flour"/"eggs"/"sugar"/"oil"/etc | X is made of Y) HasFirstSubevent ("baking" has first subevent "make batter" | To do X the first thing that needs to be done is Y) HasSubevent ("eat" has subevent "swallow" | Doing X will lead to Y event following) HasLastSubevent ("sleeping" has last subevent of "waking" | Doing X ends with the event Y) == Commonsense knowledge bases == Cyc Open Mind Common Sense (data source) and ConceptNet (datastore and NLP engine) Evi Graphiq

    Read more →
  • Matrix regularization

    Matrix regularization

    In the field of statistical learning theory, matrix regularization generalizes notions of vector regularization to cases where the object to be learned is a matrix. The purpose of regularization is to enforce conditions, for example sparsity or smoothness, that can produce stable predictive functions. For example, in the more common vector framework, Tikhonov regularization optimizes over min x ‖ A x − y ‖ 2 + λ ‖ x ‖ 2 {\displaystyle \min _{x}\left\|Ax-y\right\|^{2}+\lambda \left\|x\right\|^{2}} to find a vector x {\displaystyle x} that is a stable solution to the regression problem. When the system is described by a matrix rather than a vector, this problem can be written as min X ‖ A X − Y ‖ 2 + λ ‖ X ‖ 2 , {\displaystyle \min _{X}\left\|AX-Y\right\|^{2}+\lambda \left\|X\right\|^{2},} where the vector norm enforcing a regularization penalty on x {\displaystyle x} has been extended to a matrix norm on X {\displaystyle X} . Matrix regularization has applications in matrix completion, multivariate regression, and multi-task learning. Ideas of feature and group selection can also be extended to matrices, and these can be generalized to the nonparametric case of multiple kernel learning. == Basic definition == Consider a matrix W {\displaystyle W} to be learned from a set of examples, S = ( X i t , y i t ) {\displaystyle S=(X_{i}^{t},y_{i}^{t})} , where i {\displaystyle i} goes from 1 {\displaystyle 1} to n {\displaystyle n} , and t {\displaystyle t} goes from 1 {\displaystyle 1} to T {\displaystyle T} . Let each input matrix X i {\displaystyle X_{i}} be ∈ R D T {\displaystyle \in \mathbb {R} ^{DT}} , and let W {\displaystyle W} be of size D × T {\displaystyle D\times T} . A general model for the output y {\displaystyle y} can be posed as y i t = ⟨ W , X i t ⟩ F , {\displaystyle y_{i}^{t}=\left\langle W,X_{i}^{t}\right\rangle _{F},} where the inner product is the Frobenius inner product. For different applications the matrices X i {\displaystyle X_{i}} will have different forms, but for each of these the optimization problem to infer W {\displaystyle W} can be written as min W ∈ H E ( W ) + R ( W ) , {\displaystyle \min _{W\in {\mathcal {H}}}E(W)+R(W),} where E {\displaystyle E} defines the empirical error for a given W {\displaystyle W} , and R ( W ) {\displaystyle R(W)} is a matrix regularization penalty. The function R ( W ) {\displaystyle R(W)} is typically chosen to be convex and is often selected to enforce sparsity (using ℓ 1 {\displaystyle \ell ^{1}} -norms) and/or smoothness (using ℓ 2 {\displaystyle \ell ^{2}} -norms). Finally, W {\displaystyle W} is in the space of matrices H {\displaystyle {\mathcal {H}}} with Frobenius inner product ⟨ … ⟩ F {\displaystyle \langle \dots \rangle _{F}} . == General applications == === Matrix completion === In the problem of matrix completion, the matrix X i t {\displaystyle X_{i}^{t}} takes the form X i t = e t ⊗ e i ′ , {\displaystyle X_{i}^{t}=e_{t}\otimes e_{i}',} where ( e t ) t {\displaystyle (e_{t})_{t}} and ( e i ′ ) i {\displaystyle (e_{i}')_{i}} are the canonical basis in R T {\displaystyle \mathbb {R} ^{T}} and R D {\displaystyle \mathbb {R} ^{D}} . In this case the role of the Frobenius inner product is to select individual elements w i t {\displaystyle w_{i}^{t}} from the matrix W {\displaystyle W} . Thus, the output y {\displaystyle y} is a sampling of entries from the matrix W {\displaystyle W} . The problem of reconstructing W {\displaystyle W} from a small set of sampled entries is possible only under certain restrictions on the matrix, and these restrictions can be enforced by a regularization function. For example, it might be assumed that W {\displaystyle W} is low-rank, in which case the regularization penalty can take the form of a nuclear norm. R ( W ) = λ ‖ W ‖ ∗ = λ ∑ i | σ i | , {\displaystyle R(W)=\lambda \left\|W\right\|_{}=\lambda \sum _{i}\left|\sigma _{i}\right|,} where σ i {\displaystyle \sigma _{i}} , with i {\displaystyle i} from 1 {\displaystyle 1} to min D , T {\displaystyle \min D,T} , are the singular values of W {\displaystyle W} . === Multivariate regression === Models used in multivariate regression are parameterized by a matrix of coefficients. In the Frobenius inner product above, each matrix X {\displaystyle X} is X i t = e t ⊗ x i {\displaystyle X_{i}^{t}=e_{t}\otimes x_{i}} such that the output of the inner product is the dot product of one row of the input with one column of the coefficient matrix. The familiar form of such models is Y = X W + b {\displaystyle Y=XW+b} Many of the vector norms used in single variable regression can be extended to the multivariate case. One example is the squared Frobenius norm, which can be viewed as an ℓ 2 {\displaystyle \ell ^{2}} -norm acting either entrywise, or on the singular values of the matrix: R ( W ) = λ ‖ W ‖ F 2 = λ ∑ i ∑ j | w i j | 2 = λ Tr ⁡ ( W ∗ W ) = λ ∑ i σ i 2 . {\displaystyle R(W)=\lambda \left\|W\right\|_{F}^{2}=\lambda \sum _{i}\sum _{j}\left|w_{ij}\right|^{2}=\lambda \operatorname {Tr} \left(W^{}W\right)=\lambda \sum _{i}\sigma _{i}^{2}.} In the multivariate case the effect of regularizing with the Frobenius norm is the same as the vector case; very complex models will have larger norms, and, thus, will be penalized more. === Multi-task learning === The setup for multi-task learning is almost the same as the setup for multivariate regression. The primary difference is that the input variables are also indexed by task (columns of Y {\displaystyle Y} ). The representation with the Frobenius inner product is then X i t = e t ⊗ x i t . {\displaystyle X_{i}^{t}=e_{t}\otimes x_{i}^{t}.} The role of matrix regularization in this setting can be the same as in multivariate regression, but matrix norms can also be used to couple learning problems across tasks. In particular, note that for the optimization problem min W ‖ X W − Y ‖ 2 2 + λ ‖ W ‖ 2 2 {\displaystyle \min _{W}\left\|XW-Y\right\|_{2}^{2}+\lambda \left\|W\right\|_{2}^{2}} the solutions corresponding to each column of Y {\displaystyle Y} are decoupled. That is, the same solution can be found by solving the joint problem, or by solving an isolated regression problem for each column. The problems can be coupled by adding an additional regularization penalty on the covariance of solutions min W , Ω ‖ X W − Y ‖ 2 2 + λ 1 ‖ W ‖ 2 2 + λ 2 Tr ⁡ ( W T Ω − 1 W ) {\displaystyle \min _{W,\Omega }\left\|XW-Y\right\|_{2}^{2}+\lambda _{1}\left\|W\right\|_{2}^{2}+\lambda _{2}\operatorname {Tr} \left(W^{T}\Omega ^{-1}W\right)} where Ω {\displaystyle \Omega } models the relationship between tasks. This scheme can be used to both enforce similarity of solutions across tasks, and to learn the specific structure of task similarity by alternating between optimizations of W {\displaystyle W} and Ω {\displaystyle \Omega } . When the relationship between tasks is known to lie on a graph, the Laplacian matrix of the graph can be used to couple the learning problems. == Spectral regularization == Regularization by spectral filtering has been used to find stable solutions to problems such as those discussed above by addressing ill-posed matrix inversions (see for example Filter function for Tikhonov regularization). In many cases the regularization function acts on the input (or kernel) to ensure a bounded inverse by eliminating small singular values, but it can also be useful to have spectral norms that act on the matrix that is to be learned. There are a number of matrix norms that act on the singular values of the matrix. Frequently used examples include the Schatten p-norms, with p = 1 or 2. For example, matrix regularization with a Schatten 1-norm, also called the nuclear norm, can be used to enforce sparsity in the spectrum of a matrix. This has been used in the context of matrix completion when the matrix in question is believed to have a restricted rank. In this case the optimization problem becomes: min ‖ W ‖ ∗ subject to W i , j = Y i j . {\displaystyle \min \left\|W\right\|_{}~~{\text{ subject to }}~~W_{i,j}=Y_{ij}.} Spectral Regularization is also used to enforce a reduced rank coefficient matrix in multivariate regression. In this setting, a reduced rank coefficient matrix can be found by keeping just the top n {\displaystyle n} singular values, but this can be extended to keep any reduced set of singular values and vectors. == Structured sparsity == Sparse optimization has become the focus of much research interest as a way to find solutions that depend on a small number of variables (see e.g. the Lasso method). In principle, entry-wise sparsity can be enforced by penalizing the entry-wise ℓ 0 {\displaystyle \ell ^{0}} -norm of the matrix, but the ℓ 0 {\displaystyle \ell ^{0}} -norm is not convex. In practice this can be implemented by convex relaxation to the ℓ 1 {\displaystyle \ell ^{1}} -norm. While entry-wise regularization with an ℓ 1 {\displaystyle \ell ^{1}} -norm will find solutions with a small number of nonzero elements, applying an ℓ 1 {

    Read more →
  • Stability (learning theory)

    Stability (learning theory)

    Stability, also known as algorithmic stability, is a notion in computational learning theory of how a machine learning algorithm output is changed with small perturbations to its inputs. A stable learning algorithm is one for which the prediction does not change much when the training data is modified slightly. For instance, consider a machine learning algorithm that is being trained to recognize handwritten letters of the alphabet, using 1000 examples of handwritten letters and their labels ("A" to "Z") as a training set. One way to modify this training set is to leave out an example, so that only 999 examples of handwritten letters and their labels are available. A stable learning algorithm would produce a similar classifier with both the 1000-element and 999-element training sets. Stability can be studied for many types of learning problems, from language learning to inverse problems in physics and engineering, as it is a property of the learning process rather than the type of information being learned. The study of stability gained importance in computational learning theory in the 2000s when it was shown to have a connection with generalization. It was shown that for large classes of learning algorithms, notably empirical risk minimization algorithms, certain types of stability ensure good generalization. == History == A central goal in designing a machine learning system is to guarantee that the learning algorithm will generalize, or perform accurately on new examples after being trained on a finite number of them. In the 1990s, milestones were reached in obtaining generalization bounds for supervised learning algorithms. The technique historically used to prove generalization was to show that an algorithm was consistent, using the uniform convergence properties of empirical quantities to their means. This technique was used to obtain generalization bounds for the large class of empirical risk minimization (ERM) algorithms. An ERM algorithm is one that selects a solution from a hypothesis space H {\displaystyle H} in such a way to minimize the empirical error on a training set S {\displaystyle S} . A general result, proved by Vladimir Vapnik for an ERM binary classification algorithms, is that for any target function and input distribution, any hypothesis space H {\displaystyle H} with VC-dimension d {\displaystyle d} , and n {\displaystyle n} training examples, the algorithm is consistent and will produce a training error that is at most O ( d n ) {\displaystyle O\left({\sqrt {\frac {d}{n}}}\right)} (plus logarithmic factors) from the true error. The result was later extended to almost-ERM algorithms with function classes that do not have unique minimizers. Vapnik's work, using what became known as VC theory, established a relationship between generalization of a learning algorithm and properties of the hypothesis space H {\displaystyle H} of functions being learned. However, these results could not be applied to algorithms with hypothesis spaces of unbounded VC-dimension. Put another way, these results could not be applied when the information being learned had a complexity that was too large to measure. Some of the simplest machine learning algorithms—for instance, for regression—have hypothesis spaces with unbounded VC-dimension. Another example is language learning algorithms that can produce sentences of arbitrary length. Stability analysis was developed in the 2000s for computational learning theory and is an alternative method for obtaining generalization bounds. The stability of an algorithm is a property of the learning process, rather than a direct property of the hypothesis space H {\displaystyle H} , and it can be assessed in algorithms that have hypothesis spaces with unbounded or undefined VC-dimension such as nearest neighbor. A stable learning algorithm is one for which the learned function does not change much when the training set is slightly modified, for instance by leaving out an example. A measure of Leave one out error is used in a Cross Validation Leave One Out (CVloo) algorithm to evaluate a learning algorithm's stability with respect to the loss function. As such, stability analysis is the application of sensitivity analysis to machine learning. == Summary of classic results == Early 1900s - Stability in learning theory was earliest described in terms of continuity of the learning map L {\displaystyle L} , traced to Andrey Nikolayevich Tikhonov. 1979 - Devroye and Wagner observed that the leave-one-out behavior of an algorithm is related to its sensitivity to small changes in the sample. 1999 - Kearns and Ron discovered a connection between finite VC-dimension and stability. 2002 - In a landmark paper, Bousquet and Elisseeff proposed the notion of uniform hypothesis stability of a learning algorithm and showed that it implies low generalization error. Uniform hypothesis stability, however, is a strong condition that does not apply to large classes of algorithms, including ERM algorithms with a hypothesis space of only two functions. 2002 - Kutin and Niyogi extended Bousquet and Elisseeff's results by providing generalization bounds for several weaker forms of stability which they called almost-everywhere stability. Furthermore, they took an initial step in establishing the relationship between stability and consistency in ERM algorithms in the Probably Approximately Correct (PAC) setting. 2004 - Poggio et al. proved a general relationship between stability and ERM consistency. They proposed a statistical form of leave-one-out-stability which they called CVEEEloo stability, and showed that it is a) sufficient for generalization in bounded loss classes, and b) necessary and sufficient for consistency (and thus generalization) of ERM algorithms for certain loss functions such as the square loss, the absolute value and the binary classification loss. 2010 - Shalev Shwartz et al. noticed problems with the original results of Vapnik due to the complex relations between hypothesis space and loss class. They discuss stability notions that capture different loss classes and different types of learning, supervised and unsupervised. 2016 - Moritz Hardt et al. proved stability of gradient descent given certain assumption on the hypothesis and number of times each instance is used to update the model. == Preliminary definitions == We define several terms related to learning algorithms training sets, so that we can then define stability in multiple ways and present theorems from the field. A machine learning algorithm, also known as a learning map L {\displaystyle L} , maps a training data set, which is a set of labeled examples ( x , y ) {\displaystyle (x,y)} , onto a function f {\displaystyle f} from X {\displaystyle X} to Y {\displaystyle Y} , where X {\displaystyle X} and Y {\displaystyle Y} are in the same space of the training examples. The functions f {\displaystyle f} are selected from a hypothesis space of functions called H {\displaystyle H} . The training set from which an algorithm learns is defined as S = { z 1 = ( x 1 , y 1 ) , . . , z m = ( x m , y m ) } {\displaystyle S=\{z_{1}=(x_{1},\ y_{1})\ ,..,\ z_{m}=(x_{m},\ y_{m})\}} and is of size m {\displaystyle m} in Z = X × Y {\displaystyle Z=X\times Y} drawn i.i.d. from an unknown distribution D. Thus, the learning map L {\displaystyle L} is defined as a mapping from Z m {\displaystyle Z_{m}} into H {\displaystyle H} , mapping a training set S {\displaystyle S} onto a function f S {\displaystyle f_{S}} from X {\displaystyle X} to Y {\displaystyle Y} . Here, we consider only deterministic algorithms where L {\displaystyle L} is symmetric with respect to S {\displaystyle S} , i.e. it does not depend on the order of the elements in the training set. Furthermore, we assume that all functions are measurable and all sets are countable. The loss V {\displaystyle V} of a hypothesis f {\displaystyle f} with respect to an example z = ( x , y ) {\displaystyle z=(x,y)} is then defined as V ( f , z ) = V ( f ( x ) , y ) {\displaystyle V(f,z)=V(f(x),y)} . The empirical error of f {\displaystyle f} is I S [ f ] = 1 n ∑ V ( f , z i ) {\displaystyle I_{S}[f]={\frac {1}{n}}\sum V(f,z_{i})} . The true error of f {\displaystyle f} is I [ f ] = E z V ( f , z ) {\displaystyle I[f]=\mathbb {E} _{z}V(f,z)} Given a training set S of size m, we will build, for all i = 1....,m, modified training sets as follows: By removing the i-th element S | i = { z 1 , . . . , z i − 1 , z i + 1 , . . . , z m } {\displaystyle S^{|i}=\{z_{1},...,\ z_{i-1},\ z_{i+1},...,\ z_{m}\}} By replacing the i-th element S i = { z 1 , . . . , z i − 1 , z i ′ , z i + 1 , . . . , z m } {\displaystyle S^{i}=\{z_{1},...,\ z_{i-1},\ z_{i}',\ z_{i+1},...,\ z_{m}\}} == Definitions of stability == === Hypothesis Stability === An algorithm L {\displaystyle L} has hypothesis stability β with respect to the loss function V if the following holds: ∀ i ∈ { 1 , . . . , m } , E S , z [ | V ( f S , z ) − V ( f S |

    Read more →
  • Intelligent control

    Intelligent control

    Intelligent control is a class of control techniques that use various artificial intelligence computing approaches like neural networks, Bayesian probability, fuzzy logic, machine learning, reinforcement learning, evolutionary computation and genetic algorithms. == Overview == Intelligent control can be divided into the following major sub-domains: Neural network control Machine learning control Reinforcement learning Bayesian control Fuzzy control Neuro-fuzzy control Expert Systems Genetic control New control techniques are created continuously as new models of intelligent behavior are created and computational methods developed to support them. === Neural network controller === Neural networks have been used to solve problems in almost all spheres of science and technology. Neural network control basically involves two steps: System identification Control It has been shown that a feedforward network with nonlinear, continuous and differentiable activation functions have universal approximation capability. Recurrent networks have also been used for system identification. Given, a set of input-output data pairs, system identification aims to form a mapping among these data pairs. Such a network is supposed to capture the dynamics of a system. For the control part, deep reinforcement learning has shown its ability to control complex systems. === Bayesian controllers === Bayesian probability has produced a number of algorithms that are in common use in many advanced control systems, serving as state space estimators of some variables that are used in the controller. The Kalman filter and the Particle filter are two examples of popular Bayesian control components. The Bayesian approach to controller design often requires an important effort in deriving the so-called system model and measurement model, which are the mathematical relationships linking the state variables to the sensor measurements available in the controlled system. In this respect, it is very closely linked to the system-theoretic approach to control design.

    Read more →
  • Commonsense knowledge (artificial intelligence)

    Commonsense knowledge (artificial intelligence)

    In artificial intelligence research, commonsense knowledge consists of facts about the everyday world, such as "Lemons are sour" or "Cows say moo", that all humans are expected to know. It is currently an unsolved problem in artificial general intelligence. The first AI program to address common sense knowledge was Advice Taker in 1959 by John McCarthy. Commonsense knowledge can underpin a commonsense reasoning process, to attempt inferences such as "You might bake a cake because you want people to eat the cake." A natural language processing process can be attached to the commonsense knowledge base to allow the knowledge base to attempt to answer questions about the world. Common sense knowledge also helps to solve problems in the face of incomplete information. Using widely held beliefs about everyday objects, or common sense knowledge, AI systems make common sense assumptions or default assumptions about the unknown similar to the way people do. In an AI system or in English, this is expressed as "Normally P holds", "Usually P" or "Typically P so Assume P". For example, if we know the fact "Tweety is a bird", because we know the commonly held belief about birds, "typically birds fly," without knowing anything else about Tweety, we may reasonably assume the fact that "Tweety can fly." As more knowledge of the world is discovered or learned over time, the AI system can revise its assumptions about Tweety using a truth maintenance process. If we later learn that "Tweety is a penguin" then truth maintenance revises this assumption because we also know "penguins do not fly". == Commonsense reasoning == Commonsense reasoning simulates the human ability to use commonsense knowledge to make presumptions about the type and essence of ordinary situations they encounter every day, and to change their "minds" should new information come to light. This includes time, missing or incomplete information and cause and effect. The ability to explain cause and effect is an important aspect of explainable AI. Truth maintenance algorithms automatically provide an explanation facility because they create elaborate records of presumptions. Compared with humans, all existing computer programs that attempt human-level AI perform extremely poorly on modern "commonsense reasoning" benchmark tests such as the Winograd Schema Challenge. The problem of attaining human-level competency at "commonsense knowledge" tasks is considered to probably be "AI complete" (that is, solving it would require the ability to synthesize a fully human-level intelligence), although some oppose this notion and believe compassionate intelligence is also required for human-level AI. Common sense reasoning has been applied successfully in more limited domains such as natural language processing and automated diagnosis or analysis. == Commonsense knowledge base construction == Compiling comprehensive knowledge bases of commonsense assertions (CSKBs) is a long-standing challenge in AI research. From early expert-driven efforts like CYC and WordNet, significant advances were achieved via the crowdsourced OpenMind Commonsense project, which led to the crowdsourced ConceptNet KB. Several approaches have attempted to automate CSKB construction, most notably, via text mining (WebChild, Quasimodo, TransOMCS, Ascent), as well as harvesting these directly from pre-trained language models (AutoTOMIC). These resources are significantly larger than ConceptNet, though the automated construction mostly makes them of moderately lower quality. Challenges also remain on the representation of commonsense knowledge: Most CSKB projects follow a triple data model, which is not necessarily best suited for breaking more complex natural language assertions. A notable exception here is GenericsKB, which applies no further normalization to sentences, but retains them in full. == Applications == Around 2013, MIT researchers developed BullySpace, an extension of the commonsense knowledgebase ConceptNet, to catch taunting social media comments. BullySpace included over 200 semantic assertions based around stereotypes, to help the system infer that comments like "Put on a wig and lipstick and be who you really are" are more likely to be an insult if directed at a boy than a girl. ConceptNet has also been used by chatbots and by computers that compose original fiction. At Lawrence Livermore National Laboratory, common sense knowledge was used in an intelligent software agent to detect violations of a comprehensive nuclear test ban treaty. == Data == As an example, as of 2012 ConceptNet includes these 21 language-independent relations: IsA (An "RV" is a "vehicle" | X is an instance of a Y) UsedFor (a "cake tin" is used for "making cakes" | X is used for the purpose Y) HasA (A "rabbit" has a "tail" | X possesses Y element or feature) CapableOf (a "cook" is capable of "making baked goods" | X is capable of doing Y) Desires (a "child" desires "the aroma of baking" | X has a desire for Y) CreatedBy ("cake" is created by a "baker" | X is created by Y) PartOf (a "knife" is be part of a "knife set" | X is a part of Y) Causes ("Heat" causes "cooking"| X is what causes Y) LocatedNear (the "oven" is located near the "refrigerator" | X is located near Y) AtLocation (Somewhere a "Cook" can be at a "restaurant" | X is at the location of Y) DefinedAs (a "Cupcake" is defined as a "cake" that also has the qualities of being "small", "baked within a wrapper", and "containing only one area of frosting or icing" | X is defined as Y that also has the properties A, B & C) SymbolOf (a "heart" is a symbol of "affection" | X is a symbolic representation of Y) ReceivesAction ("cake" can receive the action of being "eaten" | X is capable of receiving action Y) HasPrerequisite ("baking" has the prerequisite of obtaining the "ingredients" | X cannot do Y unless A does B) MotivatedByGoal ("baking" is motivated by the goal of "consumption"/"eating" | X has the motivation of Y goal) CausesDesire ("baking" makesYou want to "follow recipe" | X causes the desire to do Y) MadeOf ("Cake" is made of "flour"/"eggs"/"sugar"/"oil"/etc | X is made of Y) HasFirstSubevent ("baking" has first subevent "make batter" | To do X the first thing that needs to be done is Y) HasSubevent ("eat" has subevent "swallow" | Doing X will lead to Y event following) HasLastSubevent ("sleeping" has last subevent of "waking" | Doing X ends with the event Y) == Commonsense knowledge bases == Cyc Open Mind Common Sense (data source) and ConceptNet (datastore and NLP engine) Evi Graphiq

    Read more →
  • Visual descriptor

    Visual descriptor

    In computer vision, visual descriptors or image descriptors are descriptions of the visual features of the contents in images, videos, or algorithms or applications that produce such descriptions. They describe elementary characteristics such as the shape, the color, the texture or the motion, among others. == Introduction == As a result of the new communication technologies and the massive use of Internet in our society, the amount of audio-visual information available in digital format is increasing considerably. Therefore, it has been necessary to design some systems that allow us to describe the content of several types of multimedia information in order to search and classify them. The audio-visual descriptors are in charge of the contents description. These descriptors have a good knowledge of the objects and events found in a video, image or audio and they allow the quick and efficient searches of the audio-visual content. This system can be compared to the search engines for textual contents. Although it is relatively easy to find text with a computer, it is much more difficult to find concrete audio and video parts. For instance, imagine somebody searching a scene of a happy person. The happiness is a feeling and it is not evident its shape, color and texture description in images. The description of the audio-visual content is not a superficial task and it is essential for the effective use of this type of archives. The standardization system that deals with audio-visual descriptors is the MPEG-7 (Motion Picture Expert Group - 7). == Types == Descriptors are the first step to find out the connection between pixels contained in a digital image and what humans recall after having observed an image or a group of images after some minutes. Visual descriptors are divided in two main groups: General information descriptors: contain low level descriptors which give a description about color, shape, regions, textures and motion. Specific domain information descriptors: give information about objects and events in the scene. A concrete example would be face recognition. === General information descriptors === General information descriptors consist of a set of descriptors that covers different basic and elementary features like: color, texture, shape, motion, location and others. This description is automatically generated by means of signal processing. ==== Color ==== It's the most basic quality of visual content. Five tools are defined to describe color. The three first tools represent the color distribution and the last ones describe the color relation between sequences or group of images: Dominant color descriptor (DCD) Scalable color descriptor (SCD) Color structure descriptor (CSD) Color layout descriptor (CLD) Group of frame (GoF) or group-of-pictures (GoP) ==== Texture ==== It's an important quality in order to describe an image. The texture descriptors characterize image textures or regions. They observe the region homogeneity and the histograms of these region borders. The set of descriptors is formed by: Homogeneous texture descriptor (HTD) Texture browsing descriptor (TBD) Edge histogram descriptor (EHD) ==== Shape ==== It contains important semantic information due to human's ability to recognize objects through their shape. However, this information can only be extracted by means of a segmentation similar to the one that the human visual system implements. Nowadays, such a segmentation system is not available yet, however there exists a serial of algorithms which are considered to be a good approximation. These descriptors describe regions, contours and shapes for 2D images and for 3D volumes. The shape descriptors are the following ones: Region-based shape descriptor (RSD) Contour-based shape descriptor (CSD) 3-D shape descriptor (3-D SD) ==== Motion ==== It's defined by four different descriptors which describe motion in video sequence. Motion is related to the objects motion in the sequence and to the camera motion. This last information is provided by the capture device, whereas the rest is implemented by means of image processing. The descriptor set is the following one: Motion activity descriptor (MAD) Camera motion descriptor (CMD) Motion trajectory descriptor (MTD) Warping and parametric motion descriptor (WMD and PMD) ==== Location ==== Elements location in the image is used to describe elements in the spatial domain. In addition, elements can also be located in the temporal domain: Region locator descriptor (RLD) Spatio temporal locator descriptor (STLD) === Specific domain information descriptors === These descriptors, which give information about objects and events in the scene, are not easily extractable, even more when the extraction is to be automatically done. Nevertheless, they can be manually processed. As mentioned before, face recognition is a concrete example of an application that tries to automatically obtain this information. == Descriptors applications == Among all applications, the most important ones are: Multimedia documents search engines and classifiers. Digital library: visual descriptors allow a very detailed and concrete search of any video or image by means of different search parameters. For instance, the search of films where a known actor appears, the search of videos containing the Everest mountain, etc. Personalized electronic news service. Possibility of an automatic connection to a TV channel broadcasting a soccer match, for example, whenever a player approaches the goal area. Control and filtering of concrete audiovisual content, like violent or pornographic material. Also, authorization for some multimedia content.

    Read more →
  • Multi-task learning

    Multi-task learning

    Multi-task learning (MTL) is a subfield of machine learning in which multiple learning tasks are solved at the same time, while exploiting commonalities and differences across tasks. This can result in improved learning efficiency and prediction accuracy for the task-specific models, when compared to training the models separately. Inherently, Multi-task learning is a multi-objective optimization problem having trade-offs between different tasks. Early versions of MTL were called "hints". In a widely cited 1997 paper, Rich Caruana gave the following characterization:Multitask Learning is an approach to inductive transfer that improves generalization by using the domain information contained in the training signals of related tasks as an inductive bias. It does this by learning tasks in parallel while using a shared representation; what is learned for each task can help other tasks be learned better. In the classification context, MTL aims to improve the performance of multiple classification tasks by learning them jointly. One example is a spam-filter, which can be treated as distinct but related classification tasks across different users. To make this more concrete, consider that different people have different distributions of features which distinguish spam emails from legitimate ones, for example an English speaker may find that all emails in Russian are spam, not so for Russian speakers. Yet there is a definite commonality in this classification task across users, for example one common feature might be text related to money transfer. Solving each user's spam classification problem jointly via MTL can let the solutions inform each other and improve performance. Further examples of settings for MTL include multiclass classification and multi-label classification. Multi-task learning works because regularization induced by requiring an algorithm to perform well on a related task can be superior to regularization that prevents overfitting by penalizing all complexity uniformly. One situation where MTL may be particularly helpful is if the tasks share significant commonalities and are generally slightly under sampled. However, as discussed below, MTL has also been shown to be beneficial for learning unrelated tasks. == Methods == The key challenge in multi-task learning, is how to combine learning signals from multiple tasks into a single model. This may strongly depend on how well different task agree with each other, or contradict each other. There are several ways to address this challenge: === Task grouping and overlap === Within the MTL paradigm, information can be shared across some or all of the tasks. Depending on the structure of task relatedness, one may want to share information selectively across the tasks. For example, tasks may be grouped or exist in a hierarchy, or be related according to some general metric. Suppose, as developed more formally below, that the parameter vector modeling each task is a linear combination of some underlying basis. Similarity in terms of this basis can indicate the relatedness of the tasks. For example, with sparsity, overlap of nonzero coefficients across tasks indicates commonality. A task grouping then corresponds to those tasks lying in a subspace generated by some subset of basis elements, where tasks in different groups may be disjoint or overlap arbitrarily in terms of their bases. Task relatedness can be imposed a priori or learned from the data. Hierarchical task relatedness can also be exploited implicitly without assuming a priori knowledge or learning relations explicitly. For example, the explicit learning of sample relevance across tasks can be done to guarantee the effectiveness of joint learning across multiple domains. === Exploiting unrelated tasks: Auxiliary learning === In auxiliary learning, one attempts learning a group of principal tasks using a group of auxiliary tasks, unrelated to the principal ones. With the right unrelated tasks, joint learning of unrelated tasks which use the same input data have been shown to be beneficial, and provide significant improvement over standard MTL. The reason is that prior knowledge about task relatedness can lead to sparser and more informative representations for each task grouping, essentially by screening out idiosyncrasies of the data distribution. It has been proposed to build on a prior multitask methodology by favoring a shared low-dimensional representation within each task grouping, and imposing a penalty on tasks from different groups which encourages the two representations to be orthogonal. Learning with auxiliary unrelated tasks poses two major challenges: Finding useful auxiliary tasks and combining losses of all tasks in a useful way. Some methods can learn these from data together with the training process, and combine tasks efficiently. === Transfer of knowledge === Related to multi-task learning is the concept of knowledge transfer. Whereas traditional multi-task learning implies that a shared representation is developed concurrently across tasks, transfer of knowledge implies a sequentially shared representation. Large scale machine learning projects such as the deep convolutional neural network GoogLeNet, an image-based object classifier, can develop robust representations which may be useful to further algorithms learning related tasks. For example, the pre-trained model can be used as a feature extractor to perform pre-processing for another learning algorithm. Or the pre-trained model can be used to initialize a model with similar architecture which is then fine-tuned to learn a different classification task. === Multiple non-stationary tasks === Traditionally Multi-task learning and transfer of knowledge are applied to stationary learning settings. Their extension to non-stationary environments is termed Group online adaptive learning (GOAL). Sharing information could be particularly useful if learners operate in continuously changing environments, because a learner could benefit from previous experience of another learner to quickly adapt to their new environment. Such group-adaptive learning has numerous applications, from predicting financial time-series, through content recommendation systems, to visual understanding for adaptive autonomous agents. === Multi-task optimization === Multi-task optimization focuses on solving optimizing the whole process. The paradigm has been inspired by the well-established concepts of transfer learning and multi-task learning in predictive analytics. The key motivation behind multi-task optimization is that if optimization tasks are related to each other in terms of their optimal solutions or the general characteristics of their function landscapes, the search progress can be transferred to substantially accelerate the search on the other. The success of the paradigm is not necessarily limited to one-way knowledge transfers from simpler to more complex tasks. In practice an attempt is to intentionally solve a more difficult task that may unintentionally solve several smaller problems. There is a direct relationship between multitask optimization and multi-objective optimization. In some cases, the simultaneous training of seemingly related tasks may hinder performance compared to single-task models. Commonly, MTL models employ task-specific modules on top of a joint feature representation obtained using a shared module. Since this joint representation must capture useful features across all tasks, MTL may hinder individual task performance if the different tasks seek conflicting representation, i.e., the gradients of different tasks point to opposing directions or differ significantly in magnitude. This phenomenon is commonly referred to as negative transfer. To mitigate this issue, various MTL optimization methods have been proposed. It has been reported that meta-knowledge transfer could help avoid negative transfer.Besides, the per-task gradients are combined into a joint update direction through various aggregation algorithms or heuristics. There are several common approaches for multi-task optimization: Bayesian optimization, evolutionary computation, and approaches based on Game theory. ==== Multi-task Bayesian optimization ==== Multi-task Bayesian optimization is a modern model-based approach that leverages the concept of knowledge transfer to speed up the automatic hyperparameter optimization process of machine learning algorithms. The method builds a multi-task Gaussian process model on the data originating from different searches progressing in tandem. The captured inter-task dependencies are thereafter utilized to better inform the subsequent sampling of candidate solutions in respective search spaces. ==== Evolutionary multi-tasking ==== Evolutionary multi-tasking has been explored as a means of exploiting the implicit parallelism of population-based search algorithms to simultaneously progress multiple distinct optimization tasks. By mapping all task

    Read more →
  • Intelligent agent

    Intelligent agent

    In artificial intelligence, an intelligent agent is an entity that perceives its environment, takes actions autonomously to achieve goals, and may improve its performance through machine learning or by acquiring knowledge. AI textbooks define artificial intelligence as the "study and design of intelligent agents," emphasizing that goal-directed behavior is central to intelligence. A specialized subset of intelligent agents, agentic AI (also known as an AI agent or simply agent), expands this concept by proactively pursuing goals, making decisions, and taking actions over extended periods. Intelligent agents can range from simple to highly complex. A basic thermostat or control system is considered an intelligent agent, as is a human being, or any other system that meets the same criteria—such as a firm, a state, or a biome. Intelligent agents operate based on an objective function, which encapsulates their goals. They are designed to create and execute plans that maximize the expected value of this function upon completion. For example, a reinforcement learning agent has a reward function, which allows programmers to shape its desired behavior. Similarly, an evolutionary algorithm's behavior is guided by a fitness function. Intelligent agents in artificial intelligence are closely related to agents in economics, and versions of the intelligent agent paradigm are studied in cognitive science, ethics, and the philosophy of practical reason, as well as in many interdisciplinary socio-cognitive modeling and computer social simulations. Intelligent agents are often described schematically as abstract functional systems similar to computer programs . To distinguish theoretical models from real-world implementations, abstract descriptions of intelligent agents are called abstract intelligent agents. Intelligent agents are also closely related to software agents—autonomous computer programs that carry out tasks on behalf of users. They are also referred to using a term borrowed from economics: a "rational agent". == Intelligent agents as the foundation of AI == The concept of intelligent agents provides a foundational lens through which to define and understand artificial intelligence. For instance, the influential textbook Artificial Intelligence: A Modern Approach (Russell & Norvig) describes: Agent: Anything that perceives its environment (using sensors) and acts upon it (using actuators). E.g., a robot with cameras and wheels, or a software program that reads data and makes recommendations. Rational Agent: An agent that strives to achieve the best possible outcome based on its knowledge and past experiences. "Best" is defined by a performance measure – a way of evaluating how well the agent is doing. Artificial Intelligence (as a field): The study and creation of these rational agents. Other researchers and definitions build upon this foundation. Padgham & Winikoff emphasize that intelligent agents should react to changes in their environment in a timely way, proactively pursue goals, and be flexible and robust (able to handle unexpected situations). Some also suggest that ideal agents should be "rational" in the economic sense (making optimal choices) and capable of complex reasoning, like having beliefs, desires, and intentions (BDI model). Kaplan and Haenlein offer a similar definition, focusing on a system's ability to understand external data, learn from that data, and use what is learned to achieve goals through flexible adaptation. Defining AI in terms of intelligent agents offers several key advantages: Avoids Philosophical Debates: It sidesteps arguments about whether AI is "truly" intelligent or conscious, like those raised by the Turing test or Searle's Chinese Room. It focuses on behavior and goal achievement, not on replicating human thought. Objective Testing: It provides a clear, scientific way to evaluate AI systems. Researchers can compare different approaches by measuring how well they maximize a specific "goal function" (or objective function). This allows for direct comparison and combination of techniques. Interdisciplinary Communication: It creates a common language for AI researchers to collaborate with other fields like mathematical optimization and economics, which also use concepts like "goals" and "rational agents." == Objective function == An objective function (or goal function) specifies the goals of an intelligent agent. An agent is deemed more intelligent if it consistently selects actions that yield outcomes better aligned with its objective function. In effect, the objective function serves as a measure of success. The objective function may be: Simple: For example, in a game of Go, the objective function might assign a value of 1 for a win and 0 for a loss. Complex: It might require the agent to evaluate and learn from past actions, adapting its behavior based on patterns that have proven effective. The objective function encapsulates all of the goals the agent is designed to achieve. For rational agents, it also incorporates the trade-offs between potentially conflicting goals. For instance, a self-driving car's objective function might balance factors such as safety, speed, and passenger comfort. Different terms are used to describe this concept, depending on the context. These include: Utility function: Often used in economics and decision theory, representing the desirability of a state. Objective function: A general term used in optimization. Loss function: Typically used in machine learning, where the goal is to minimize the loss (error). Reward Function: Used in reinforcement learning. Fitness Function: Used in evolutionary systems. Goals, and therefore the objective function, can be: Explicitly defined: Programmed directly into the agent. Induced: Learned or evolved over time. In reinforcement learning, a "reward function" provides feedback, encouraging desired behaviors and discouraging undesirable ones. The agent learns to maximize its cumulative reward. In evolutionary systems, a "fitness function" determines which agents are more likely to reproduce. This is analogous to natural selection, where organisms evolve to maximize their chances of survival and reproduction. Some AI systems, such as nearest-neighbor, reason by analogy rather than being explicitly goal-driven. However, even these systems can have goals implicitly defined within their training data. Such systems can still be benchmarked by framing the non-goal system as one whose "goal" is to accomplish its narrow classification task. Systems not traditionally considered agents, like knowledge-representation systems, are sometimes included in the paradigm by framing them as agents with a goal of, for example, answering questions accurately. Here, the concept of an "action" is extended to encompass the "act" of providing an answer. As a further extension, mimicry-driven systems can be framed as agents optimizing a "goal function" based on how closely the agent mimics the desired behavior. In generative adversarial networks (GANs) of the 2010s, an "encoder"/"generator" component attempts to mimic and improvise human text composition. The generator tries to maximize a function representing how well it can fool an antagonistic "predictor"/"discriminator" component. While symbolic AI systems often use an explicit goal function, the paradigm also applies to neural networks and evolutionary computing. Reinforcement learning can generate intelligent agents that appear to act in ways intended to maximize a "reward function". Sometimes, instead of setting the reward function directly equal to the desired benchmark evaluation function, machine learning programmers use reward shaping to initially give the machine rewards for incremental progress. Yann LeCun stated in 2018, "Most of the learning algorithms that people have come up with essentially consist of minimizing some objective function." AlphaZero chess had a simple objective function: +1 point for each win, and -1 point for each loss. A self-driving car's objective function would be more complex. Evolutionary computing can evolve intelligent agents that appear to act in ways intended to maximize a "fitness function" influencing how many descendants each agent is allowed to leave. The mathematical formalism of AIXI was proposed as a maximally intelligent agent in this paradigm. However, AIXI is uncomputable. In the real world, an intelligent agent is constrained by finite time and hardware resources, and scientists compete to produce algorithms that achieve progressively higher scores on benchmark tests with existing hardware. == Agent function == An intelligent agent's behavior can be described mathematically by an agent function. This function determines what the agent does based on what it has seen. A percept refers to the agent's sensory inputs at a single point in time. For example, a self-driving car's percepts might include camera images, lidar data, GPS coordinates, and speed r

    Read more →