AI Tools

AI Tools — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  D/Vision Pro

  D/Vision Pro was one of the earliest marketed non-linear editing systems. It was released by TouchVision Systems, Inc. in the mid-1990s. The program was DOS-based and worked on either Intel's 386 or 486 processor. The system used AVI compression and worked with the Action Media II board. The system allowed users to digitize video, audio, and timecode, create an edit decision list (EDL), instantly play back the edited program, and output the finished EDL in a wide variety of formats. These cost-effective editing systems were used by numerous independent filmmakers and in low-budget productions during the mid-late 1990s. D/Vision Pro's low-quality compression led TouchVision (later renamed D/Vision Systems) to abandon it in favor of D/Vision Online, which was purchased by Discreet Logic and renamed edit. In June 2002, Discreet discontinued edit, as they did not want it to interfere with smoke sales which were more profitable. Discreet was later purchased by Autodesk.

  Read more →
• 

  Concurrent MetateM

  Concurrent MetateM is a multi-agent language in which each agent is programmed using a set of (augmented) temporal logic specifications of the behaviour it should exhibit. These specifications are executed directly to generate the behaviour of the agent. As a result, there is no risk of invalidating the logic as with systems where logical specification must first be translated to a lower-level implementation. The root of the MetateM concept is Gabbay's separation theorem; any arbitrary temporal logic formula can be rewritten in a logically equivalent past → future form. Execution proceeds by a process of continually matching rules against a history, and firing those rules when antecedents are satisfied. Any instantiated future-time consequents become commitments which must subsequently be satisfied, iteratively generating a model for the formula made up of the program rules. == Temporal Connectives == The Temporal Connectives of Concurrent MetateM can divided into two categories, as follows: Strict past time connectives: '●' (weak last), '◎' (strong last), '◆' (was), '■' (heretofore), 'S' (since), and 'Z' (zince, or weak since). Present and future time connectives: '◯' (next), '◇' (sometime), '□' (always), 'U' (until), and 'W' (unless). The connectives {◎,●,◆,■,◯,◇,□} are unary; the remainder are binary. === Strict past time connectives === ==== Weak last ==== ●ρ is satisfied now if ρ was true in the previous time. If ●ρ is interpreted at the beginning of time, it is satisfied despite there being no actual previous time. Hence "weak" last. ==== Strong last ==== ◎ρ is satisfied now if ρ was true in the previous time. If ◎ρ is interpreted at the beginning of time, it is not satisfied because there is no actual previous time. Hence "strong" last. ==== Was ==== ◆ρ is satisfied now if ρ was true in any previous moment in time. ==== Heretofore ==== ■ρ is satisfied now if ρ was true in every previous moment in time. ==== Since ==== ρSψ is satisfied now if ψ is true at any previous moment and ρ is true at every moment after that moment. ==== Zince, or weak since ==== ρZψ is satisfied now if (ψ is true at any previous moment and ρ is true at every moment after that moment) OR ψ has not happened in the past. === Present and future time connectives === ==== Next ==== ◯ρ is satisfied now if ρ is true in the next moment in time. ==== Sometime ==== ◇ρ is satisfied now if ρ is true now or in any future moment in time. ==== Always ==== □ρ is satisfied now if ρ is true now and in every future moment in time. ==== Until ==== ρUψ is satisfied now if ψ is true at any future moment and ρ is true at every moment prior. ==== Unless ==== ρWψ is satisfied now if (ψ is true at any future moment and ρ is true at every moment prior) OR ψ does not happen in the future.

  Read more →
• 

  Developmental robotics

  Developmental robotics (DevRob), sometimes called epigenetic robotics, is a scientific field which aims at studying the developmental mechanisms, architectures and constraints that allow lifelong and open-ended learning of new skills and new knowledge in embodied machines. As in human children, learning is expected to be cumulative and of progressively increasing complexity, and to result from self-exploration of the world in combination with social interaction. The typical methodological approach consists in starting from theories of human and animal development elaborated in fields such as developmental psychology, neuroscience, developmental and evolutionary biology, and linguistics, then to formalize and implement them in robots, sometimes exploring extensions or variants of them. The experimentation of those models in robots allows researchers to confront them with reality, and as a consequence, developmental robotics also provides feedback and novel hypotheses on theories of human and animal development. Developmental robotics is related to but differs from evolutionary robotics (ER). ER uses populations of robots that evolve over time, whereas DevRob is interested in how the organization of a single robot's control system develops through experience, over time. DevRob is also related to work done in the domains of robotics and artificial life. == Background == Can a robot learn like a child? Can it learn a variety of new skills and new knowledge unspecified at design time and in a partially unknown and changing environment? How can it discover its body and its relationships with the physical and social environment? How can its cognitive capacities continuously develop without the intervention of an engineer once it is "out of the factory"? What can it learn through natural social interactions with humans? These are the questions at the center of developmental robotics. Alan Turing, as well as a number of other pioneers of cybernetics, already formulated those questions and the general approach in 1950, but it is only since the end of the 20th century that they began to be investigated systematically. Because the concept of adaptive intelligent machines is central to developmental robotics, it has relationships with fields such as artificial intelligence, machine learning, cognitive robotics or computational neuroscience. Yet, while it may reuse some of the techniques elaborated in these fields, it differs from them from many perspectives. It differs from classical artificial intelligence because it does not assume the capability of advanced symbolic reasoning and focuses on embodied and situated sensorimotor and social skills rather than on abstract symbolic problems. It differs from cognitive robotics because it focuses on the processes that allow the formation of cognitive capabilities rather than these capabilities themselves. It differs from computational neuroscience because it focuses on functional modeling of integrated architectures of development and learning. More generally, developmental robotics is uniquely characterized by the following three features: It targets task-independent architectures and learning mechanisms, i.e. the machine/robot has to be able to learn new tasks that are unknown by the engineer; It emphasizes open-ended development and lifelong learning, i.e. the capacity of an organism to acquire continuously novel skills. This should not be understood as a capacity for learning "anything" or even “everything”, but just that the set of skills that is acquired can be infinitely extended at least in some (not all) directions; The complexity of acquired knowledge and skills shall increase (and the increase be controlled) progressively. Developmental robotics emerged at the crossroads of several research communities including embodied artificial intelligence, enactive and dynamical systems cognitive science, connectionism. Starting from the essential idea that learning and development happen as the self-organized result of the dynamical interactions among brains, bodies and their physical and social environment, and trying to understand how this self-organization can be harnessed to provide task-independent lifelong learning of skills of increasing complexity, developmental robotics strongly interacts with fields such as developmental psychology, developmental and cognitive neuroscience, developmental biology (embryology), evolutionary biology, and cognitive linguistics. As many of the theories coming from these sciences are verbal and/or descriptive, this implies a crucial formalization and computational modeling activity in developmental robotics. These computational models are then not only used as ways to explore how to build more versatile and adaptive machines but also as a way to evaluate their coherence and possibly explore alternative explanations for understanding biological development. == Research directions == === Skill domains === Due to the general approach and methodology, developmental robotics projects typically focus on having robots develop the same types of skills as human infants. A first category that is important being investigated is the acquisition of sensorimotor skills. These include the discovery of one's own body, including its structure and dynamics such as hand-eye coordination, locomotion, and interaction with objects as well as tool use, with a particular focus on the discovery and learning of affordances. A second category of skills targeted by developmental robots are social and linguistic skills: the acquisition of simple social behavioural games such as turn-taking, coordinated interaction, lexicons, syntax and grammar, and the grounding of these linguistic skills into sensorimotor skills (sometimes referred as symbol grounding). In parallel, the acquisition of associated cognitive skills are being investigated such as the emergence of the self/non-self distinction, the development of attentional capabilities, of categorization systems and higher-level representations of affordances or social constructs, of the emergence of values, empathy, or theories of mind. === Mechanisms and constraints === The sensorimotor and social spaces in which humans and robot live are so large and complex that only a small part of potentially learnable skills can actually be explored and learnt within a life-time. Thus, mechanisms and constraints are necessary to guide developmental organisms in their development and control of the growth of complexity. There are several important families of these guiding mechanisms and constraints which are studied in developmental robotics, all inspired by human development: Motivational systems, generating internal reward signals that drive exploration and learning, which can be of two main types: extrinsic motivations push robots/organisms to maintain basic specific internal properties such as food and water level, physical integrity, or light (e.g. in phototropic systems); intrinsic motivations push robot to search for novelty, challenge, compression or learning progress per se, thus generating what is sometimes called curiosity-driven learning and exploration, or alternatively active learning and exploration; Social guidance: as humans learn a lot by interacting with their peers, developmental robotics investigates mechanisms that can allow robots to participate to human-like social interaction. By perceiving and interpreting social cues, this may allow robots both to learn from humans (through diverse means such as imitation, emulation, stimulus enhancement, demonstration, etc. ...) and to trigger natural human pedagogy. Thus, social acceptance of developmental robots is also investigated; Statistical inference biases and cumulative knowledge/skill reuse: biases characterizing both representations/encodings and inference mechanisms can typically allow considerable improvement of the efficiency of learning and are thus studied. Related to this, mechanisms allowing to infer new knowledge and acquire new skills by reusing previously learnt structures is also an essential field of study; The properties of embodiment, including geometry, materials, or innate motor primitives/synergies often encoded as dynamical systems, can considerably simplify the acquisition of sensorimotor or social skills, and is sometimes referred as morphological computation. The interaction of these constraints with other constraints is an important axis of investigation; Maturational constraints: In human infants, both the body and the neural system grow progressively, rather than being full-fledged already at birth. This implies, for example, that new degrees of freedom, as well as increases of the volume and resolution of available sensorimotor signals, may appear as learning and development unfold. Transposing these mechanisms in developmental robots, and understanding how it may hinder or on the contrary ease the acquisition of novel complex skills is a central questi

  Read more →
• 

  Double descent

  Double descent in statistics and machine learning is the phenomenon where a model's error rate on the test set initially decreases with the number of parameters, then peaks, then decreases again. This phenomenon has been considered surprising, as it contradicts assumptions about overfitting in classical machine learning. The increase usually occurs near the interpolation threshold, where the number of parameters is the same as the number of training data points (the model is just large enough to fit the training data). Or, more precisely, it is the maximum number of samples on which the model/training procedure achieves approximately on average 0 training error. == History == Early observations of what would later be called double descent in specific models date back to 1989. The term "double descent" was coined by Belkin et. al. in 2019, when the phenomenon gained popularity as a broader concept exhibited by many models. The latter development was prompted by a perceived contradiction between the conventional wisdom that too many parameters in the model result in a significant overfitting error (an extrapolation of the bias–variance tradeoff), and the empirical observations in the 2010s that some modern machine learning techniques tend to perform better with larger models. == Theoretical models == Double descent occurs in linear regression with isotropic Gaussian covariates and isotropic Gaussian noise. A model of double descent at the thermodynamic limit has been analyzed using the replica trick, and the result has been confirmed numerically. A number of works have suggested that double descent can be explained using the concept of effective dimension: While a network may have a large number of parameters, in practice only a subset of those parameters are relevant for generalization performance, as measured by the local Hessian curvature. This explanation is formalized through PAC-Bayes compression-based generalization bounds, which show that less complex models are expected to generalize better under a Solomonoff prior.

  Read more →
• 

  Behavior-based robotics

  Behavior-based robotics (BBR) or behavioral robotics is an approach in robotics that focuses on robots that are able to exhibit complex-appearing behaviors despite little internal variable state to model its immediate environment, mostly gradually correcting its actions via sensory-motor links. == Principles == Behavior-based robotics sets itself apart from traditional artificial intelligence by using biological systems as a model. Classic artificial intelligence typically uses a set of steps to solve problems, it follows a path based on internal representations of events compared to the behavior-based approach. Rather than use preset calculations to tackle a situation, behavior-based robotics relies on adaptability. This advancement has allowed behavior-based robotics to become commonplace in researching and data gathering. Most behavior-based systems are also reactive, which means they need no programming of what a chair looks like, or what kind of surface the robot is moving on. Instead, all the information is gleaned from the input of the robot's sensors. The robot uses that information to gradually correct its actions according to the changes in immediate environment. Behavior-based robots (BBR) usually show more biological-appearing actions than their computing-intensive counterparts, which are very deliberate in their actions. A BBR often makes mistakes, repeats actions, and appears confused, but can also show the anthropomorphic quality of tenacity. Comparisons between BBRs and insects are frequent because of these actions. BBRs are sometimes considered examples of weak artificial intelligence, although some have claimed they are models of all intelligence. == Features == Most behavior-based robots are programmed with a basic set of features to start them off. They are given a behavioral repertoire to work with dictating what behaviors to use and when, obstacle avoidance and battery charging can provide a foundation to help the robots learn and succeed. Rather than build world models, behavior-based robots simply react to their environment and problems within that environment. They draw upon internal knowledge learned from their past experiences combined with their basic behaviors to resolve problems. == History == The school of behavior-based robots owes much to work undertaken in the 1980s at the Massachusetts Institute of Technology by Rodney Brooks, who with students and colleagues built a series of wheeled and legged robots utilizing the subsumption architecture. Brooks' papers, often written with lighthearted titles such as "Planning is just a way of avoiding figuring out what to do next", the anthropomorphic qualities of his robots, and the relatively low cost of developing such robots, popularized the behavior-based approach. Brooks' work builds—whether by accident or not—on two prior milestones in the behavior-based approach. In the 1950s, W. Grey Walter, an English scientist with a background in neurological research, built a pair of vacuum tube-based robots that were exhibited at the 1951 Festival of Britain, and which have simple but effective behavior-based control systems. The second milestone is Valentino Braitenberg's 1984 book, "Vehicles – Experiments in Synthetic Psychology" (MIT Press). He describes a series of thought experiments demonstrating how simply wired sensor/motor connections can result in some complex-appearing behaviors such as fear and love. Later work in BBR is from the BEAM robotics community, which has built upon the work of Mark Tilden. Tilden was inspired by the reduction in the computational power needed for walking mechanisms from Brooks' experiments (which used one microcontroller for each leg), and further reduced the computational requirements to that of logic chips, transistor-based electronics, and analog circuit design. A different direction of development includes extensions of behavior-based robotics to multi-robot teams. The focus in this work is on developing simple generic mechanisms that result in coordinated group behavior, either implicitly or explicitly.

  Read more →
• 

  Automated Mathematician

  The Automated Mathematician (AM) is one of the earliest successful discovery systems. It was created by Douglas Lenat in Lisp, and in 1977 led to Lenat being awarded the IJCAI Computers and Thought Award. AM worked by generating and modifying short Lisp programs which were then interpreted as defining various mathematical concepts; for example, a program that tested equality between the length of two lists was considered to represent the concept of numerical equality, while a program that produced a list whose length was the product of the lengths of two other lists was interpreted as representing the concept of multiplication. The system had elaborate heuristics for choosing which programs to extend and modify, based on the experiences of working mathematicians in solving mathematical problems. == Controversy == Lenat claimed that the system was composed of hundreds of data structures called "concepts", together with hundreds of "heuristic rules" and a simple flow of control: "AM repeatedly selects the top task from the agenda and tries to carry it out. This is the whole control structure!" Yet the heuristic rules were not always represented as separate data structures; some had to be intertwined with the control flow logic. Some rules had preconditions that depended on the history, or otherwise could not be represented in the framework of the explicit rules. What's more, the published versions of the rules often involve vague terms that are not defined further, such as "If two expressions are structurally similar, ..." (Rule 218) or "... replace the value obtained by some other (very similar) value..." (Rule 129). Another source of information is the user, via Rule 2: "If the user has recently referred to X, then boost the priority of any tasks involving X." Thus, it appears quite possible that much of the real discovery work is buried in unexplained procedures. Lenat claimed that the system had rediscovered both Goldbach's conjecture and the fundamental theorem of arithmetic. Later critics accused Lenat of over-interpreting the output of AM. In his paper Why AM and Eurisko appear to work, Lenat conceded that any system that generated enough short Lisp programs would generate ones that could be interpreted by an external observer as representing equally sophisticated mathematical concepts. However, he argued that this property was in itself interesting—and that a promising direction for further research would be to look for other languages in which short random strings were likely to be useful. == Successor == This intuition was the basis of AM's successor Eurisko, which attempted to generalize the search for mathematical concepts to the search for useful heuristics.

  Read more →
• 

  Deep Learning Super Sampling

  Deep Learning Super Sampling (DLSS) is a suite of real-time deep learning image enhancement and upscaling technologies developed by Nvidia that are available in a number of video games. The goal of these technologies is to allow the majority of the graphics pipeline to run at a lower resolution for increased performance, and then infer a higher resolution image from this that approximates the same level of detail as if the image had been rendered at this higher resolution. This allows for higher graphical settings or frame rates for a given output resolution, depending on user preference. All generations of DLSS are available on all RTX-branded cards from Nvidia in supported titles. However, the Frame Generation feature is only supported on RTX 40 series GPUs or newer and Multi Frame Generation is only available on 50 series GPUs. == History == Nvidia advertised DLSS as a key feature of GeForce RTX 20 series GPUs when they launched in September 2018. At that time, the results were limited to a few video games, namely Battlefield V, or Metro Exodus, because the algorithm had to be trained specifically on each game on which it was applied and the results were usually not as good as simple resolution upscaling. In 2019, Control shipped with ray tracing and an image processing algorithm that approximated DLSS, which did not use the Tensor Cores. In April 2020, Nvidia advertised and shipped an improved version of DLSS named DLSS 2 with driver version 445.75. DLSS 2.0 was available for a few existing games including Control and Wolfenstein: Youngblood, and would later be added to many newly released games and game engines such as Unreal Engine and Unity. This time Nvidia said that it used the Tensor Cores again, and that the AI did not need to be trained specifically on each game. Despite sharing the DLSS branding, the two iterations of DLSS differ significantly and are not backwards-compatible. In January 2025, Nvidia stated that there are over 540 games and apps supporting DLSS, and that over 80% of Nvidia RTX users activate DLSS. In March 2025, there were more than 100 games that support DLSS 4, according to Nvidia. By May 2025, over 125 games supported DLSS 4. The first video game console to use DLSS, the Nintendo Switch 2, was released on June 5, 2025. Nvidia announced DLSS 4.5 at CES 2026. In January 2026, Nvidia stated that over 250 games and applications support Multi Frame Generation. On March 16, 2026, at GTC 2026, Nvidia CEO Jensen Huang presented DLSS 5, a real-time AI model based on neural rendering that realistically enhances lighting and material surfaces at up to 4K resolution while retaining the developer's intended art style. It is planned to release in fall of 2026. In a blog post on its website, Nvidia has announced that DLSS 5 will be available in such games as Assassin's Creed Shadows, Delta Force, Hogwarts Legacy, Naraka: Bladepoint, Phantom Blade Zero, Resident Evil Requiem, Starfield, The Elder Scrolls IV: Oblivion Remastered, and more. On May 31, 2026, Nvidia announced an updated version of Ray Reconstruction for DLSS 4.5 in a blog post, scheduled for release on all RTX GPUs in August of the same year. They said it is designed to better embed spatial awareness into scenes and analyze engine data on movements and lighting conditions, resulting in a sharper, more stable, and less noisy image. === Release timeline === == Technology == === DLSS 1 === The first iteration of DLSS is a predominantly spatial image upscaler with two stages, both relying on convolutional auto-encoder neural networks. The first step is an image enhancement network which uses the current frame and motion vectors to perform edge enhancement, and spatial anti-aliasing. The second stage is an image upscaling step which uses the single raw, low-resolution frame to upscale the image to the desired output resolution. Using just a single frame for upscaling means the neural network itself must generate a large amount of new information to produce the high-resolution output, which can result in slight hallucinations such as leaves that differ in style to the source content. The neural networks are trained on a per-game basis by generating a "perfect frame" using traditional supersampling to 64 samples per pixel, as well as the motion vectors for each frame. The data collected must be as comprehensive as possible, including as many levels, times of day, graphical settings, resolutions, etc. as possible. This data is also augmented using common augmentations such as rotations, colour changes, and random noise to help generalize the test data. Training is performed on Nvidia's Saturn V supercomputer. This first iteration received a mixed response, with many criticizing the often soft appearance and artifacts along with glitches in certain situations; likely a side effect of the limited data from only using a single frame input to the neural networks which could not be trained to perform optimally in all scenarios and edge-cases. Nvidia also demonstrated the ability for the auto-encoder networks to learn the ability to recreate depth-of-field and motion blur, although this functionality has never been included in a publicly released product. === DLSS 2 === DLSS 2 is a temporal anti-aliasing upsampling (TAAU) implementation, using data from previous frames extensively through sub-pixel jittering to resolve fine detail and reduce aliasing. The data DLSS 2 collects includes: the raw low-resolution input, motion vectors, depth buffers, and exposure / brightness information. It can also be used as a simpler TAA implementation where the image is rendered at 100% resolution, rather than being upsampled by DLSS, Nvidia brands this as DLAA (Deep Learning Anti-Aliasing). TAA(U) is used in many modern video games and game engines; however, all previous implementations have used some form of manually written heuristics to prevent temporal artifacts such as ghosting and flickering. One example of this is neighborhood clamping which forcefully prevents samples collected in previous frames from deviating too much compared to nearby pixels in newer frames. This helps to identify and fix many temporal artifacts, but deliberately removing fine details in this way is analogous to applying a blur filter, and thus the final image can appear blurry when using this method. DLSS 2 uses a convolutional auto-encoder neural network trained to identify and fix temporal artifacts, instead of manually programmed heuristics as mentioned above. Because of this, DLSS 2 can generally resolve detail better than other TAA and TAAU implementations, while also removing most temporal artifacts. This is why DLSS 2 can sometimes produce a sharper image than rendering at higher, or even native resolutions using traditional TAA. However, no temporal solution is perfect, and artifacts (ghosting in particular) are still visible in some scenarios when using DLSS 2. Because temporal artifacts occur in most art styles and environments in broadly the same way, the neural network that powers DLSS 2 does not need to be retrained when being used in different games. Despite this, Nvidia does frequently ship new minor revisions of DLSS 2 with new titles, so this could suggest some minor training optimizations may be performed as games are released, although Nvidia does not provide changelogs for these minor revisions to confirm this. The main advancements compared to DLSS 1 include: Significantly improved detail retention, a generalized neural network that does not need to be re-trained per-game, and ~2x less overhead (~1–2 ms vs ~2–4 ms). It should also be noted that forms of TAAU such as DLSS 2 are not upscalers in the same sense as techniques such as ESRGAN or DLSS 1, which attempt to create new information from a low-resolution source; instead, TAAU works to recover data from previous frames, rather than creating new data. In practice, this means low resolution textures in games will still appear low-resolution when using current TAAU techniques. This is why Nvidia recommends game developers use higher resolution textures than they would normally for a given rendering resolution by applying a mip-map bias when DLSS 2 is enabled. === DLSS 3 === Augments DLSS 2 with improved image quality and the introduction of a new motion interpolation feature, called Frame Generation. The DLSS Frame Generation algorithm takes two rendered frames from the rendering pipeline and generates a new frame that smoothly transitions between them. For every frame rendered, one additional frame is generated. DLSS 3.0 makes use of a new generation Optical Flow Accelerator (OFA) included in the Ada Lovelace architecture of GeForce RTX 40 series GPUs and with that is exclusive to them. The new OFA is said to be faster and more accurate than the one already available in previous Turing and Ampere RTX GPUs. === DLSS 3.5 === DLSS 3.5 adds Ray Reconstruction, replacing multiple denoising algorithms with a single AI model trained o

  Read more →
• 

  ASR-complete

  ASR-complete is, by analogy to "NP-completeness" in complexity theory, a term to indicate that the difficulty of a computational problem is equivalent to solving the central automatic speech recognition problem, i.e. recognize and understanding spoken language. Unlike "NP-completeness", this term is typically used informally. Such problems are hypothesised to include: Spoken natural language understanding Understanding speech from far-field microphones, i.e. handling the reverbation and background noise These problems are easy for humans to do (in fact, they are described directly in terms of imitating humans). Some systems can solve very simple restricted versions of these problems, but none can solve them in their full generality.

  Read more →
• 

  Plug computer

  A plug computer is a small-form-factor computer whose chassis contains the AC power plug, and thus plugs directly into the wall. Alternatively, the computer may resemble an AC adapter or a similarly small device. Plug computers are often configured for use in the home or office as compact computer. == Description == Plug computers consist of a high-performance, low-power system-on-a-chip processor, with several I/O hardware ports (USB ports, Ethernet connectors, etc.). Most versions do not have provisions for connecting a display and are best suited to running media servers, back-up services, or file sharing and remote access functions; thus acting as a bridge between in-home protocols (such as Digital Living Network Alliance (DLNA) and Server Message Block (SMB)) and cloud-based services. There are, however, plug computer offerings that have analog VGA monitor and/or HDMI connectors, which, along with multiple USB ports, permit the use of a display, keyboard, and mouse, thus making them full-fledged, low-power alternatives to desktop and laptop computers. They typically run any of a number of Linux distributions. Plug computers typically consume little power and are inexpensive. == History == A number of other devices of this type began to appear at the 2009 Consumer Electronics Show. On January 6, 2009 CTERA Networks launched a device called CloudPlug that provides online backup at local disk speeds and overlays a file sharing service. The device also transforms any external USB hard drive into a network-attached storage device. On January 7, 2009, Cloud Engines unveiled the Pogoplug network access server. On January 8, 2009, Axentra announced availability of their HipServ platform. On February 23, 2009, Marvell Technology Group announced its plans to build a mini-industry around plug computers. On August 19, 2009, CodeLathe announced availability of their TonidoPlug network access server. On November 13, 2009 QuadAxis launched its plug computing device product line and development platform, featuring the QuadPlug and QuadPC and running QuadMix, a modified Linux. On January 5, 2010, Iomega announced their iConnect network access server. On January 7, 2010 Pbxnsip launched its plug computing device the sipJack running pbxnsip: an IP Communications platform.

  Read more →
• 

  Audio inpainting

  Audio inpainting (also known as audio interpolation) is an audio restoration task which deals with the reconstruction of missing or corrupted portions of a digital audio signal. Inpainting techniques are employed when parts of the audio have been lost due to various factors such as transmission errors, data corruption or errors during recording. The goal of audio inpainting is to fill in the gaps (i.e., the missing portions) in the audio signal seamlessly, making the reconstructed portions indistinguishable from the original content and avoiding the introduction of audible distortions or alterations. Many techniques have been proposed to solve the audio inpainting problem and this is usually achieved by analyzing the temporal and spectral information surrounding each missing portion of the considered audio signal. Classic methods employ statistical models or digital signal processing algorithms to predict and synthesize the missing or damaged sections. Recent solutions, instead, take advantage of deep learning models, thanks to the growing trend of exploiting data-driven methods in the context of audio restoration. Depending on the extent of the lost information, the inpainting task can be divided in three categories. Short inpainting refers to the reconstruction of few milliseconds (approximately less than 10) of missing signal, that occurs in the case of short distortions such as clicks or clipping. In this case, the goal of the reconstruction is to recover the lost information exactly. In long inpainting instead, with gaps in the order of hundreds of milliseconds or even seconds, this goal becomes unrealistic, since restoration techniques cannot rely on local information. Therefore, besides providing a coherent reconstruction, the algorithms need to generate new information that has to be semantically compatible with the surrounding context (i.e., the audio signal surrounding the gaps). The case of medium duration gaps lays between short and long inpainting. It refers to the reconstruction of tens of millisecond of missing data, a scale where the non-stationary characteristic of audio already becomes important. == Definition == Consider a digital audio signal x {\displaystyle \mathbf {x} } . A corrupted version of x {\displaystyle \mathbf {x} } , which is the audio signal presenting missing gaps to be reconstructed, can be defined as x ~ = m ∘ x {\displaystyle \mathbf {\tilde {x}} =\mathbf {m} \circ \mathbf {x} } , where m {\displaystyle \mathbf {m} } is a binary mask encoding the reliable or missing samples of x {\displaystyle \mathbf {x} } , and ∘ {\displaystyle \circ } represents the element-wise product. Audio inpainting aims at finding x ^ {\displaystyle \mathbf {\hat {x}} } (i.e., the reconstruction), which is an estimation of x {\displaystyle \mathbf {x} } . This is an ill-posed inverse problem, which is characterized by a non-unique set of solutions. For this reason, similarly to the formulation used for the inpainting problem in other domains, the reconstructed audio signal can be found through an optimization problem that is formally expressed as x ^ ∗ = argmin X ^ L ( m ∘ x ^ , x ~ ) + R ( x ^ ) {\displaystyle \mathbf {\hat {x}} ^{}={\underset {\hat {\mathbf {X} }}{\text{argmin}}}~L(\mathbf {m} \circ \mathbf {\hat {x}} ,\mathbf {\tilde {x}} )+R(\mathbf {\hat {x}} )} . In particular, x ^ ∗ {\displaystyle \mathbf {\hat {x}} ^{}} is the optimal reconstructed audio signal and L {\displaystyle L} is a distance measure term that computes the reconstruction accuracy between the corrupted audio signal and the estimated one. For example, this term can be expressed with a mean squared error or similar metrics. Since L {\displaystyle L} is computed only on the reliable frames, there are many solutions that can minimize L ( m ∘ x ^ , x ~ ) {\displaystyle L(\mathbf {m} \circ \mathbf {\hat {x}} ,\mathbf {\tilde {x}} )} . It is thus necessary to add a constraint to the minimization, in order to restrict the results only to the valid solutions. This is expressed through the regularization term R {\displaystyle R} that is computed on the reconstructed audio signal x ^ {\displaystyle \mathbf {\hat {x}} } . This term encodes some kind of a-priori information on the audio data. For example, R {\displaystyle R} can express assumptions on the stationarity of the signal, on the sparsity of its representation or can be learned from data. == Techniques == There exist various techniques to perform audio inpainting. These can vary significantly, influenced by factors such as the specific application requirements, the length of the gaps and the available data. In the literature, these techniques are broadly divided in model-based techniques (sometimes also referred as signal processing techniques) and data-driven techniques. === Model-based techniques === Model-based techniques involve the exploitation of mathematical models or assumptions about the underlying structure of the audio signal. These models can be based on prior knowledge of the audio content or statistical properties observed in the data. By leveraging these models, missing or corrupted portions of the audio signal can be inferred or estimated. An example of a model-based techniques are autoregressive models. These methods interpolate or extrapolate the missing samples based on the neighboring values, by using mathematical functions to approximate the missing data. In particular, in autoregressive models the missing samples are completed through linear prediction. The autoregressive coefficients necessary for this prediction are learned from the surrounding audio data, specifically from the data adjacent to each gap. Some more recent techniques approach audio inpainting by representing audio signals as sparse linear combinations of a limited number of basis functions (as for example in the Short Time Fourier Transform). In this context, the aim is to find the sparse representation of the missing section of the signal that most accurately matches the surrounding, unaffected signal. The aforementioned methods exhibit optimal performance when applied to filling in relatively short gaps, lasting only a few tens of milliseconds, and thus they can be included in the context of short inpainting. However, these signal-processing techniques tend to struggle when dealing with longer gaps. The reason behind this limitation lies in the violation of the stationarity condition, as the signal often undergoes significant changes after the gap, making it substantially different from the signal preceding the gap. As a way to overcome these limitations, some approaches add strong assumptions also about the fundamental structure of the gap itself, exploiting sinusoidal modeling or similarity graphs to perform inpainting of longer missing portions of audio signals. === Data-driven techniques === Data-driven techniques rely on the analysis and exploitation of the available audio data. These techniques often employ deep learning algorithms that learn patterns and relationships directly from the provided data. They involve training models on large datasets of audio examples, allowing them to capture the statistical regularities present in the audio signals. Once trained, these models can be used to generate missing portions of the audio signal based on the learned representations, without being restricted by stationarity assumptions. Data-driven techniques also offer the advantage of adaptability and flexibility, as they can learn from diverse audio datasets and potentially handle complex inpainting scenarios. As of today, such techniques constitute the state-of-the-art of audio inpainting, being able to reconstruct gaps of hundreds of milliseconds or even seconds. These performances are made possible by the use of generative models that have the capability to generate novel content to fill in the missing portions. For example, generative adversarial networks, which are the state-of-the-art of generative models in many areas, rely on two competing neural networks trained simultaneously in a two-player minmax game: the generator produces new data from samples of a random variable, the discriminator attempts to distinguish between generated and real data. During the training, the generator's objective is to fool the discriminator, while the discriminator attempts to learn to better classify real and fake data. In GAN-based inpainting methods the generator acts as a context encoder and produces a plausible completion for the gap only given the available information surrounding it. The discriminator is used to train the generator and tests the consistency of the produced inpainted audio. Recently, also diffusion models have established themselves as the state-of-the-art of generative models in many fields, often beating even GAN-based solutions. For this reason they have also been used to solve the audio inpainting problem, obtaining valid results. These models generate new data instances by inverting the

  Read more →
• 

  AlphaChip (controversy)

  The AlphaChip controversy refers to a series of public, scholarly, and legal disputes surrounding a 2021 Nature paper by Google-affiliated researchers. The paper describes an approach to macro placement, a stage of chip floorplanning, based on reinforcement learning (RL), a machine learning method in which a system iteratively improves its decisions by optimizing performance-based reward signals. The primary technical question is whether the new techniques are better than existing (non-AI) techniques. Both internal Google studies and external attempts to replicate the algorithm have failed to show the claimed benefits. No head-to-head comparison is available because the data used in the paper is proprietary, and Google has not released any results from running its algorithm on public benchmarks. This has resulted in considerable skepticism over the paper's claims. In addition, the inability of others (both inside and outside of Google) to replicate the claimed results have sparked concerns about the paper’s methodology, reproducibility, and scientific integrity. The lead researchers of the Nature paper were affiliated with Google Brain, which became part of Google DeepMind, and later spun off into the company Ricursive. == Motivation for research: Macro placement in chip layout == Chip design for modern integrated circuits is a complex, expert-driven process that relies on electronic design automation. It determines the performance of the final chip, and takes weeks or months to complete. Advances that produce better designs, or complete the process faster, are commercially and academically significant. Macro placement is a step during chip design that determines the locations of large circuit components (macros) within a chip. It is followed by detailed placement, which places the far more numerous but much smaller standard cells. Alternatively, mixed-size placement simultaneously places both large macros and millions of small cells, requiring algorithms to handle objects that differ by several orders of magnitude in area and mobility. The number of macros per circuit typically ranges from several to thousands. Wiring must be performed after placement, and the details of this wiring strongly influence the power, performance, and area (PPA) of the completed chip. The full wiring calculation is very resource intensive, so placement tools typically use a proxy cost, a simplified objective function used to guide the placement algorithm during training and evaluation. The faithfulness of the chosen proxy cost to the final objective cost is a critical aspect of placer performance. === State of the art as of 2021 === Chips have been designed since the 1960s, so there were many existing methods as of 2021. Available options included manual design, academic tools, and commercial offerings. Academic methods include combinatorial optimization techniques such as simulated annealing, analytical placement, hierarchical heuristics, and as of 2019 reinforcement learning and broader machine learning techniques.. Existing (non-AI) academic tools for solving the same problem include APlace, NTUplace3, ePlace, RePlace, and DREAMPlace. Commercial EDA vendors also offered automated software tools for floorplanning and mixed-size placement. For instance, as of 2019 Cadence’s Innovus implementation software offered a Concurrent Macro Placer (CMP) feature to automatically place large blocks and standard cells. == The 2021 Nature paper and its claims == In 2021, Nature published a paper under the title “A graph‑placement methodology for fast chip design” co‑authored by 21 Google-affiliated researchers. The paper reported that an RL agent could generate macro placements for integrated circuits "in under six hours" and achieve improvements over human-designed layouts in power, timing performance, and area (PPA), standard chip-quality metrics referring respectively to energy consumption, chip operating speed, and silicon footprint (evaluated after wire routing). It introduced a sequential macro placement algorithm in which macros are placed one at a time instead of optimizing their locations concurrently. At each step, the algorithm selects a location for a single macro on a discretized chip canvas, conditioning its decision on the placements of previously placed macros. This sequential formulation converts macro placement into a long-horizon decision process in which early placement choices constrain later ones. After macro placement, force-directed placement is applied to place standard cells connected to the macros. Deep reinforcement learning is used to train a policy network to place macros by maximizing a reward that reflects final placement quality (for example, wirelength and congestion). Policy learning occurs during self‑play for one or multiple circuit designs. Further placement optimizations refine the overall layout by balancing wirelength, density, and overlap constraints, while treating the macro locations produced by the RL policy as fixed obstacles. The approach relies on pre-training, in which the RL model is first trained on a corpus of prior designs (twenty in the Nature paper) to learn general placement patterns before being fine-tuned on a specific chip. Circuit examples used in the study were parts of proprietary Google TPU designs, called blocks (or floorplan partitions). The paper reported results on five blocks and described the approach as generalizable across chip designs. == Controversy == Soon after the paper's publication, controversy arose over whether the claims were true, whether they were sufficiently proven, and whether academic standards were followed. These controversies arose both within Google and among external academic experts. === Internal dispute at Google and legal proceedings === In 2022, Satrajit Chatterjee, a Google engineer involved in reviewing the AlphaChip work, raised concerns internally and drafted an alternative analysis, (Stronger Baselines) arguing that established methods outperformed the RL approach under fair comparison. In March 2022, Google declined to publish this analysis and terminated Chatterjee's employment. Chatterjee filed a wrongful dismissal lawsuit, alleging that representations related to the AlphaChip research involved fraud and scientific misconduct. According to court documents, Chatterjee's study was conducted "in the context of a large potential Google Cloud deal". He noted that it "would have been unethical to imply that we had revolutionary technology when our tests showed otherwise" and claimed Google was deliberately withholding material information. Furthermore, the committee that reviewed his paper and disapproved its publication was allegedly chaired by subordinates of Jeff Dean, a senior co-author of the Nature paper. Google’s subsequent motion to dismiss was denied, holding that Chatterjee had plausibly alleged retaliation for refusing to engage in conduct he believed would violate state or federal law. === External controversy === The external questions can be summarized in four main points: (a) Are the claims supported by the evidence provided? (b) Did the paper provide enough information to allow the results to be independently reproduced and verified? If so, are the results an improvement over existing academic and commercial tools? (c) Were the comparisons in the paper done fairly and with full disclosure? (d) Were academic standards followed? Each of these is discussed below. ==== Are the claims supported by the evidence provided? ==== The Nature paper described the reduction in design-process time as going from "days or weeks" to "hours", but did not provide per-design time breakdowns or specify the number of engineers, their level of expertise, or the baseline tools and workflow against which this comparison was made. It was also unclear whether the "days or weeks" baseline included time spent on other tasks such as functional design changes. The paper also evaluated the method on fewer benchmarks (five) than is common in the field, and showed mixed results across different evaluation goals While the approach was described as improving circuit area, this claim seems unsupported, as the RL optimization did not alter the overall circuit area, as it adjusted only the locations of fixed-shape non-overlapping circuit components within a fixed rectangular layout boundary. ==== Comparison with existing methods, and replicating the algorithm ==== Because macro placement is largely geometric and its fundamental algorithms are not tied to a specific process node, competing approaches can be evaluated on public benchmarks (tests) across technologies, rather than primarily on proprietary internal designs. This is standard procedure when comparing academic placers, see . In contrast, Google has only reported results only on internal proprietary designs, and as of 2026 has not offered comparisons with prior methods on common benchmarks. Researchers at the University of Califor

  Read more →
• 

  Domain adaptation

  Domain adaptation is a field associated with machine learning and transfer learning. It addresses the challenge of training a model on one data distribution (the source domain) and applying it to a related but different data distribution (the target domain). A common example is spam filtering, where a model trained on emails from one user (source domain) is adapted to handle emails for another user with significantly different patterns (target domain). Domain adaptation techniques can also leverage unrelated data sources to improve learning. When multiple source distributions are involved, the problem extends to multi-source domain adaptation. Domain adaptation is a specific type of transfer learning. According to the taxonomy laid out by Pan and Yang (2010), it falls into the category of transductive transfer learning. In this setting, the source and target tasks are the same (e.g., both are object recognition), but the domains differ (different marginal distributions). This distinguishes it from inductive transfer learning (where labeled data is available for the target task) and unsupervised transfer learning (where labels are unavailable in both domains). == Classification of domain adaptation problems == Domain adaptation setups are classified in two different ways: according to the distribution shift between the domains, and according to the available data from the target domain. === Distribution shifts === Common distribution shifts are classified as follows: Covariate Shift occurs when the input distributions of the source and destination change, but the relationship between inputs and labels remains unchanged. The above-mentioned spam filtering example typically falls in this category. Namely, the distributions (patterns) of emails may differ between the domains, but emails labeled as spam in the one domain should similarly be labeled in another. Prior Shift (Label Shift) occurs when the label distribution differs between the source and target datasets, while the conditional distribution of features given labels remains the same. An example is a classifier of hair color in images from Italy (source domain) and Norway (target domain). The proportions of hair colors (labels) differ, but images within classes like blond and black-haired populations remain consistent across domains. A classifier for the Norway population can exploit this prior knowledge of class proportions to improve its estimates. Concept Shift (Conditional Shift) refers to changes in the relationship between features and labels, even if the input distribution remains the same. For instance, in medical diagnosis, the same symptoms (inputs) may indicate entirely different diseases (labels) in different populations (domains). === Data available during training === Domain adaptation problems typically assume that some data from the target domain is available during training. Problems can be classified according to the type of this available data: Unsupervised: Unlabeled data from the target domain is available, but no labeled data. In the above-mentioned example of spam filtering, this corresponds to the case where emails from the target domain (user) are available, but they are not labeled as spam. Domain adaptation methods can benefit from such unlabeled data, by comparing its distribution (patterns) with the labeled source domain data. Semi-supervised: Most data that is available from the target domain is unlabelled, but some labeled data is also available. In the above-mentioned case of spam filter design, this corresponds to the case that the target user has labeled some emails as being spam or not. Supervised: All data that is available from the target domain is labeled. In this case, domain adaptation reduces to refinement of the source domain predictor. In the above-mentioned example classification of hair-color from images, this could correspond to the refinement of a network already trained on a large dataset of labeled images from Italy, using newly available labeled images from Norway. == Formalization == Let X {\displaystyle X} be the input space (or description space) and let Y {\displaystyle Y} be the output space (or label space). The objective of a machine learning algorithm is to learn a mathematical model (a hypothesis) h : X → Y {\displaystyle h:X\to Y} able to attach a label from Y {\displaystyle Y} to an example from X {\displaystyle X} . This model is learned from a learning sample S = { ( x i , y i ) ∈ ( X × Y ) } i = 1 m {\displaystyle S=\{(x_{i},y_{i})\in (X\times Y)\}_{i=1}^{m}} . Usually in supervised learning (without domain adaptation), we suppose that the examples ( x i , y i ) ∈ S {\displaystyle (x_{i},y_{i})\in S} are drawn i.i.d. from a distribution D S {\displaystyle D_{S}} of support X × Y {\displaystyle X\times Y} (unknown and fixed). The objective is then to learn h {\displaystyle h} (from S {\displaystyle S} ) such that it commits the least error possible for labelling new examples coming from the distribution D S {\displaystyle D_{S}} . The main difference between supervised learning and domain adaptation is that in the latter situation we study two different (but related) distributions D S {\displaystyle D_{S}} and D T {\displaystyle D_{T}} on X × Y {\displaystyle X\times Y} . The domain adaptation task then consists of the transfer of knowledge from the source domain D S {\displaystyle D_{S}} to the target one D T {\displaystyle D_{T}} . The goal is then to learn h {\displaystyle h} (from labeled or unlabelled samples coming from the two domains) such that it commits as little error as possible on the target domain D T {\displaystyle D_{T}} . The major issue is the following: if a model is learned from a source domain, what is its capacity to correctly label data coming from the target domain? == Four algorithmic principles == === Reweighting algorithms === The objective is to reweight the source labeled sample such that it "looks like" the target sample (in terms of the error measure considered). === Iterative algorithms === A method for adapting consists in iteratively "auto-labeling" the target examples. The principle is simple: a model h {\displaystyle h} is learned from the labeled examples; h {\displaystyle h} automatically labels some target examples; a new model is learned from the new labeled examples. Note that there exist other iterative approaches, but they usually need target labeled examples. === Search of a common representation space === The goal is to find or construct a common representation space for the two domains. The objective is to obtain a space in which the domains are close to each other while keeping good performances on the source labeling task. This can be achieved through the use of Adversarial machine learning techniques where feature representations from samples in different domains are encouraged to be indistinguishable. === Hierarchical Bayesian Model === The goal is to construct a Bayesian hierarchical model p ( n ) {\displaystyle p(n)} , which is essentially a factorization model for counts n {\displaystyle n} , to derive domain-dependent latent representations allowing both domain-specific and globally shared latent factors. == Software packages == Several compilations of domain adaptation and transfer learning algorithms have been implemented over the past decades: SKADA (Python) ADAPT (Python) TLlib (Python) Domain-Adaptation-Toolbox (MATLAB)

  Read more →
• 

  Double descent

  Double descent in statistics and machine learning is the phenomenon where a model's error rate on the test set initially decreases with the number of parameters, then peaks, then decreases again. This phenomenon has been considered surprising, as it contradicts assumptions about overfitting in classical machine learning. The increase usually occurs near the interpolation threshold, where the number of parameters is the same as the number of training data points (the model is just large enough to fit the training data). Or, more precisely, it is the maximum number of samples on which the model/training procedure achieves approximately on average 0 training error. == History == Early observations of what would later be called double descent in specific models date back to 1989. The term "double descent" was coined by Belkin et. al. in 2019, when the phenomenon gained popularity as a broader concept exhibited by many models. The latter development was prompted by a perceived contradiction between the conventional wisdom that too many parameters in the model result in a significant overfitting error (an extrapolation of the bias–variance tradeoff), and the empirical observations in the 2010s that some modern machine learning techniques tend to perform better with larger models. == Theoretical models == Double descent occurs in linear regression with isotropic Gaussian covariates and isotropic Gaussian noise. A model of double descent at the thermodynamic limit has been analyzed using the replica trick, and the result has been confirmed numerically. A number of works have suggested that double descent can be explained using the concept of effective dimension: While a network may have a large number of parameters, in practice only a subset of those parameters are relevant for generalization performance, as measured by the local Hessian curvature. This explanation is formalized through PAC-Bayes compression-based generalization bounds, which show that less complex models are expected to generalize better under a Solomonoff prior.

  Read more →
• 

  Multimodal representation learning

  Multimodal representation learning is a subfield of representation learning focused on integrating and interpreting information from different modalities, such as text, images, audio, or video, by projecting them into a shared latent space. This allows for semantically similar content across modalities to be mapped to nearby points within that space, facilitating a unified understanding of diverse data types. By automatically learning meaningful features from each modality and capturing their inter-modal relationships, multimodal representation learning enables a unified representation that enhances performance in cross-media analysis tasks such as video classification, event detection, and sentiment analysis. It also supports cross-modal retrieval and translation, including image captioning, video description, and text-to-image synthesis. == Motivation == The primary motivations for multimodal representation learning arise from the inherent nature of real-world data and the limitations of unimodal approaches. Since multimodal data offers complementary and supplementary information about an object or event from different perspectives, it is more informative than relying on a single modality. A key motivation is to narrow the heterogeneity gap that exists between different modalities by projecting their features into a shared semantic subspace. This allows semantically similar content across modalities to be represented by similar vectors, facilitating the understanding of relationships and correlations between them. Multimodal representation learning aims to leverage the unique information provided by each modality to achieve a more comprehensive and accurate understanding of concepts. These unified representations are crucial for improving performance in various cross-media analysis tasks such as video classification, event detection, and sentiment analysis. They also enable cross-modal retrieval, allowing users to search and retrieve content across different modalities. Additionally, it facilitates cross-modal translation, where information can be converted from one modality to another, as seen in applications like image captioning and text-to-image synthesis. The abundance of ubiquitous multimodal data in real-world applications, including understudied areas like healthcare, finance, and human-computer interaction (HCI), further motivates the development of effective multimodal representation learning techniques. == Approaches and methods == === Canonical-correlation analysis based methods === Canonical-correlation analysis (CCA) was first introduced in 1936 by Harold Hotelling and is a fundamental approach for multimodal learning. CCA aims to find linear relationships between two sets of variables. Given two data matrices X ∈ R n × p {\displaystyle X\in \mathbb {R} ^{n\times p}} and Y ∈ R n × q {\displaystyle Y\in \mathbb {R} ^{n\times q}} representing different modalities, CCA finds projection vectors w x ∈ R p {\displaystyle w_{x}\in \mathbb {R} ^{p}} and w y ∈ R q {\displaystyle w_{y}\in \mathbb {R} ^{q}} that maximizes the correlation between the projected variables: ρ = max w x , w y w x ⊤ Σ x y w y w x ⊤ Σ x x w x w y ⊤ Σ y y w y {\displaystyle \rho =\max _{w_{x},w_{y}}{\frac {w_{x}^{\top }\Sigma _{xy}w_{y}}{{\sqrt {w_{x}^{\top }\Sigma _{xx}w_{x}}}{\sqrt {w_{y}^{\top }\Sigma _{yy}w_{y}}}}}} such that Σ x x {\displaystyle \Sigma _{xx}} and Σ y y {\displaystyle \Sigma _{yy}} are the within-modality covariance matrices, and Σ x y {\displaystyle \Sigma _{xy}} is the between-modality covariance matrix. However, standard CCA is limited by its linearity, which led to the development of nonlinear extensions, such as kernel CCA and deep CCA. ==== Kernel CCA ==== Kernel canonical correlation analysis (KCCA) extends traditional CCA to capture nonlinear relationships between modalities by implicitly mapping the data into high dimensional feature spaces using kernel functions. Given kernel functions K x {\displaystyle K_{x}} and K y {\displaystyle K_{y}} with corresponding Gram matrices K x ∈ R n × n {\displaystyle K_{x}\in \mathbb {R} ^{n\times n}} and K y ∈ R n × n {\displaystyle K_{y}\in \mathbb {R} ^{n\times n}} , KCCA seeks coefficients α {\displaystyle \alpha } and β {\displaystyle \beta } that maximize: ρ = max α , β α ⊤ K x K y β α ⊤ K x 2 α β ⊤ K y 2 β {\displaystyle \rho =\max _{\alpha ,\beta }{\frac {\alpha ^{\top }K_{x}Ky\beta }{{\sqrt {\alpha ^{\top }K_{x}^{2}\alpha }}{\sqrt {\beta ^{\top }K_{y}^{2}\beta }}}}} To prevent overfitting, regularization terms are typically added, resulting in: ρ = max α , β α T K x K y β α T ( K x 2 + λ x K x ) α β T ( K y 2 + λ y K y ) β {\displaystyle \rho =\max _{\alpha ,\beta }{\frac {\alpha ^{T}K_{x}K_{y}\beta }{{\sqrt {\alpha ^{T}\left(K_{x}^{2}+\lambda _{x}K_{x}\right)\alpha }}{\sqrt {\;\beta ^{T}\left(K_{y}^{2}+\lambda _{y}K_{y}\right)\beta }}}}} where λ x {\displaystyle \lambda _{x}} and λ y {\displaystyle \lambda _{y}} are regularization parameters. KCCA has proven effective for tasks such as cross-modal retrieval and semantic analysis, though it faces computational challenges with large datasets due to its O ( n 2 ) {\displaystyle O(n^{2})} memory requirement for sorting kernel matrices. KCCA was proposed independently by several researchers. ==== Deep CCA ==== Deep canonical correlation analysis (DCCA), introduced in 2013, employs neural networks to learn nonlinear transformations for maximizing the correlation between modalities. DCCA uses separate neural networks f x {\displaystyle f_{x}} and f y {\displaystyle f_{y}} for each modality to transform the original data before applying CCA: max W x , W y , θ x , θ y corr ⁡ ( f x ( X ; θ x ) , f y ( Y ; θ y ) ) {\displaystyle \max _{W_{x},W_{y},\theta _{x},\theta _{y}}\operatorname {corr} \left(f_{x}(X;\theta _{x}),f_{y}(Y;\theta _{y})\right)} where θ x {\displaystyle \theta _{x}} and θ y {\displaystyle \theta _{y}} represent the parameters of the neural networks, and W x {\displaystyle W_{x}} and W y {\displaystyle W_{y}} are the CCA projection matrices. The correlation objective is computed as: corr ⁡ ( H x , H y ) = tr ⁡ ( T − 1 / 2 H x T H y S − 1 / 2 ) {\displaystyle \operatorname {corr} (H_{x},H_{y})=\operatorname {tr} \left(T^{-1/2}H_{x}^{T}H_{y}S^{-1/2}\right)} where H x = f x ( X ) {\displaystyle H_{x}=f_{x}(X)} and H y = f y ( Y ) {\displaystyle H_{y}=f_{y}(Y)} are the network outputs, T = H x T H x + r x I {\displaystyle T=H_{x}^{T}H_{x}+r_{x}I} , S = H y T H y + r y I {\displaystyle S=H_{y}^{T}H_{y}+r_{y}I} and r x , r y {\displaystyle r_{x},r_{y}} are the regularization parameters. DCCA overcomes the limitations of linear CCA and kernel CCA by learning complex nonlinear relationships while maintaining computational efficiency for large datasets through mini-batch optimization. === Graph-based methods === Graph-based approaches for multimodal representation learning leverage graph structure to model relationships between entities across different modalities. These methods typically represent each modality as a graph and then learn embedding that preserve cross-modal similarities, enabling more effective joint representation of heterogeneous data. One such method is cross-modal graph neural networks (CMGNNs) that extend traditional graph neural networks (GNNs) to handle data from multiple modalities by constructing graphs that capture both intra-modal and inter-modal relationships. These networks model interactions across modalities by representing them as nodes and their relationships as edges. Other graph-based methods include Probabilistic Graphical Models (PGMs) such as deep belief networks (DBN) and deep Boltzmann machines (DBM). These models can learn a joint representation across modalities, for instance, a multimodal DBN achieves this by adding a shared restricted Boltzmann Machine (RBM) hidden layer on top of modality-specific DBNs. Additionally, the structure of data in some domains like Human-Computer Interaction (HCI), such as the view hierarchy of app screens, can potentially be modeled using graph-like structures. The field of graph representation learning is also relevant, with ongoing progress in developing evaluation benchmarks. === Diffusion maps === Another set of methods relevant to multimodal representation learning are based on diffusion maps and their extensions to handle multiple modalities. ==== Multi-view diffusion maps ==== Multi-view diffusion maps address the challenge of achieving multi-view dimensionality reduction by effectively utilizing the availability of multiple views to extract a coherent low-dimensional representation of the data. The core idea is to exploit both the intrinsic relations within each view and the mutual relations between the different views, defining a cross-view model where a random walk process implicitly hops between objects in different views. A multi-view kernel matrix is constructed by combining these relations, defining a cross-view diffusion process and associ

  Read more →
• 

  Algorithm selection

  Algorithm selection (sometimes also called per-instance algorithm selection or offline algorithm selection) is a meta-algorithmic technique to choose an algorithm from a portfolio on an instance-by-instance basis. It is motivated by the observation that on many practical problems, different algorithms have different performance characteristics. That is, while one algorithm performs well in some scenarios, it performs poorly in others and vice versa for another algorithm. If we can identify when to use which algorithm, we can optimize for each scenario and improve overall performance. This is what algorithm selection aims to do. The only prerequisite for applying algorithm selection techniques is that there exists (or that there can be constructed) a set of complementary algorithms. == Definition == Given a portfolio P {\displaystyle {\mathcal {P}}} of algorithms A ∈ P {\displaystyle {\mathcal {A}}\in {\mathcal {P}}} , a set of instances i ∈ I {\displaystyle i\in {\mathcal {I}}} and a cost metric m : P × I → R {\displaystyle m:{\mathcal {P}}\times {\mathcal {I}}\to \mathbb {R} } , the algorithm selection problem consists of finding a mapping s : I → P {\displaystyle s:{\mathcal {I}}\to {\mathcal {P}}} from instances I {\displaystyle {\mathcal {I}}} to algorithms P {\displaystyle {\mathcal {P}}} such that the cost ∑ i ∈ I m ( s ( i ) , i ) {\displaystyle \sum _{i\in {\mathcal {I}}}m(s(i),i)} across all instances is optimized. == Examples == === Boolean satisfiability problem (and other hard combinatorial problems) === A well-known application of algorithm selection is the Boolean satisfiability problem. Here, the portfolio of algorithms is a set of (complementary) SAT solvers, the instances are Boolean formulas, the cost metric is for example average runtime or number of unsolved instances. So, the goal is to select a well-performing SAT solver for each individual instance. In the same way, algorithm selection can be applied to many other N P {\displaystyle {\mathcal {NP}}} -hard problems (such as mixed integer programming, CSP, AI planning, TSP, MAXSAT, QBF and answer set programming). Competition-winning systems in SAT are SATzilla, 3S and CSHC === Machine learning === In machine learning, algorithm selection is better known as meta-learning. The portfolio of algorithms consists of machine learning algorithms (e.g., Random Forest, SVM, DNN), the instances are data sets and the cost metric is for example the error rate. So, the goal is to predict which machine learning algorithm will have a small error on each data set. == Instance features == The algorithm selection problem is mainly solved with machine learning techniques. By representing the problem instances by numerical features f {\displaystyle f} , algorithm selection can be seen as a multi-class classification problem by learning a mapping f i ↦ A {\displaystyle f_{i}\mapsto {\mathcal {A}}} for a given instance i {\displaystyle i} . Instance features are numerical representations of instances. For example, we can count the number of variables, clauses, average clause length for Boolean formulas, or number of samples, features, class balance for ML data sets to get an impression about their characteristics. === Static vs. probing features === We distinguish between two kinds of features: Static features are in most cases some counts and statistics (e.g., clauses-to-variables ratio in SAT). These features ranges from very cheap features (e.g. number of variables) to very complex features (e.g., statistics about variable-clause graphs). Probing features (sometimes also called landmarking features) are computed by running some analysis of algorithm behavior on an instance (e.g., accuracy of a cheap decision tree algorithm on an ML data set, or running for a short time a stochastic local search solver on a Boolean formula). These feature often cost more than simple static features. === Feature costs === Depending on the used performance metric m {\displaystyle m} , feature computation can be associated with costs. For example, if we use running time as performance metric, we include the time to compute our instance features into the performance of an algorithm selection system. SAT solving is a concrete example, where such feature costs cannot be neglected, since instance features for CNF formulas can be either very cheap (e.g., to get the number of variables can be done in constant time for CNFs in the DIMACs format) or very expensive (e.g., graph features which can cost tens or hundreds of seconds). It is important to take the overhead of feature computation into account in practice in such scenarios; otherwise a misleading impression of the performance of the algorithm selection approach is created. For example, if the decision which algorithm to choose can be made with perfect accuracy, but the features are the running time of the portfolio algorithms, there is no benefit to the portfolio approach. This would not be obvious if feature costs were omitted. == Approaches == === Regression approach === One of the first successful algorithm selection approaches predicted the performance of each algorithm m ^ A : I → R {\displaystyle {\hat {m}}_{\mathcal {A}}:{\mathcal {I}}\to \mathbb {R} } and selected the algorithm with the best predicted performance a r g min A ∈ P m ^ A ( i ) {\displaystyle arg\min _{{\mathcal {A}}\in {\mathcal {P}}}{\hat {m}}_{\mathcal {A}}(i)} for an instance i {\displaystyle i} . === Clustering approach === A common assumption is that the given set of instances I {\displaystyle {\mathcal {I}}} can be clustered into homogeneous subsets and for each of these subsets, there is one well-performing algorithm for all instances in there. So, the training consists of identifying the homogeneous clusters via an unsupervised clustering approach and associating an algorithm with each cluster. A new instance is assigned to a cluster and the associated algorithm selected. A more modern approach is cost-sensitive hierarchical clustering using supervised learning to identify the homogeneous instance subsets. === Pairwise cost-sensitive classification approach === A common approach for multi-class classification is to learn pairwise models between every pair of classes (here algorithms) and choose the class that was predicted most often by the pairwise models. We can weight the instances of the pairwise prediction problem by the performance difference between the two algorithms. This is motivated by the fact that we care most about getting predictions with large differences correct, but the penalty for an incorrect prediction is small if there is almost no performance difference. Therefore, each instance i {\displaystyle i} for training a classification model A 1 {\displaystyle {\mathcal {A}}_{1}} vs A 2 {\displaystyle {\mathcal {A}}_{2}} is associated with a cost | m ( A 1 , i ) − m ( A 2 , i ) | {\displaystyle |m({\mathcal {A}}_{1},i)-m({\mathcal {A}}_{2},i)|} . == Requirements == The algorithm selection problem can be effectively applied under the following assumptions: The portfolio P {\displaystyle {\mathcal {P}}} of algorithms is complementary with respect to the instance set I {\displaystyle {\mathcal {I}}} , i.e., there is no single algorithm A ∈ P {\displaystyle {\mathcal {A}}\in {\mathcal {P}}} that dominates the performance of all other algorithms over I {\displaystyle {\mathcal {I}}} (see figures to the right for examples on complementary analysis). In some application, the computation of instance features is associated with a cost. For example, if the cost metric is running time, we have also to consider the time to compute the instance features. In such cases, the cost to compute features should not be larger than the performance gain through algorithm selection. == Application domains == Algorithm selection is not limited to single domains but can be applied to any kind of algorithm if the above requirements are satisfied. Application domains include: hard combinatorial problems: SAT, Mixed Integer Programming, CSP, AI Planning, TSP, MAXSAT, QBF and Answer Set Programming combinatorial auctions in machine learning, the problem is known as meta-learning software design black-box optimization multi-agent systems numerical optimization linear algebra, differential equations evolutionary algorithms vehicle routing problem power systems For an extensive list of literature about algorithm selection, we refer to a literature overview. == Variants of algorithm selection == === Online selection === Online algorithm selection refers to switching between different algorithms during the solving process. This is useful as a hyper-heuristic. In contrast, offline algorithm selection selects an algorithm for a given instance only once and before the solving process. === Computation of schedules === An extension of algorithm selection is the per-instance algorithm scheduling problem, in which we do not select only one solver, but we select a time budget for each algorithm

  Read more →