AI Image To Video Generator

AI Image To Video Generator — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Computer-aided lean management

  Computer-aided lean management, in business management, is a methodology of developing and using software-controlled, lean systems integration. Its goal is to drive innovation towards cost and cycle-time savings. It attempts to create an efficient use of capital and resources through the development and use of one integrated system model to run a business's planning, engineering, design, maintenance, and operations. == Overview == Computer-Aided Lean Management (CALM) is a management philosophy that uses software to reduce risk and inefficiencies. CALM acts on uncertainties and business inefficiencies to increase profitability through the use of computational decision-making tools that enable opportunities for additional value creation. It is based on the application of software to enable continuous improvement through an Integrated System Model (ISM) of the business’s physical assets, business processes, and machine learning. This integration of software applications using lean principles was developed in the aerospace industry and has migrated to the energy industry. The creation of an ISM removes the barriers posed by the silos or stovepipes inherent in the departmentalization of most companies. Integration enables lean uses of information for the creation of actionable knowledge. CALM strives to create such a lean management approach to running the company through the rigors of software enforcement. From this software enforcement comes clear policy and procedures that are adhered to, activity-based costing, measurement of effectiveness, and the capability of using advanced algorithms for dramatic improvements in optimization of resources. CALM creates business capabilities through software to enable technology application, streamlining of processes, and a lean organizational structure. The methodology is based on a common sense approach for running a business, by measuring actions taken and using those measurements to design more efficient processes. == History == CALM was inspired by lean processes and techniques that were already dominant management technologies with a wide diversity of applications and successes. Motorola and General Electric had been known for the concepts of Six Sigma; Boeing had been managing mass (using modular and flexible assembly options), and Toyota combined elements of these methodologies to create the Toyota Production System. Boeing then took the Toyota model and added computer-aided enforcement of lean methodologies throughout the manufacturing process. One of the major sources for CALM's outgrowth was integrated definition (IDEF) modeling in aerospace manufacturing that was pioneered by the U.S. Air Force in the 1970s. IDEF is a methodology designed to model the end-to-end decisions, actions, and activities of an organization or system so that costs, performance, and cycle times can be optimized. IDEF methods have been adapted for wider use in automotive, aerospace, pharmaceuticals, and software development industries. IDEF methods serve as a starting point to understand lean management through semantic data modeling. The IDEF process begins by mapping the existing functions of an enterprise, creating a graphical model, or road map, that shows what controls each important function, who performs it, what resources are required for carrying it out, what it produces, how much it costs, and what relationships it has to other functions of the organization. IDEF simulations have been found to be efficient at streamlining and modernizing both companies and governmental agencies. Perhaps the best-developed evolution of the IDEF model beyond Toyota was at Boeing. Their project life-cycle process has grown into a rigorous software system that links people, tasks, tools, materials, and the environmental impact of any newly planned project, before any building is allowed to begin. Routinely, more than half of the time for any given project is spent building the precedence diagrams, or three-dimensional process maps, integrating with outside suppliers, and designing the implementation plan–all on the computer. Once real activity is initiated, an action tracker is used to monitor inputs and outputs versus the schedule and delivery metrics in real time throughout the organization. When the execution of a new airplane design begins, it is so well organized that it consistently cuts both costs and build time in half for each successive generation of airframe. Boeing created a complex lean management process called 'define and control airplane configuration/manufacturing resource management' (DCAC/MRM). The process was built with the help of the operations research and computer sciences departments of the University of Pittsburgh. The manufacture of the Boeing 777 was ultimately a success, and it became the precursor to succeeding generations of CALM at Boeing. The methodology of CALM has recently been applied to field orientated infrastructure based businesses with highly interdependent systems, such as electric utilities where a smart grid concept is being researched and developed. The management of infrastructure-based industries like oil, gas, electricity, water, transportation, and renewables requires massive investments in interdependent, physical infrastructure, as well as simultaneous attention to disparate market forces. In infrastructure businesses that manage field assets, uncertainty is the biggest impediment to profitability, rather than the maintenance of efficient supply chains or the management of factory assembly lines. These businesses are dominated by risk from uncertainties such as weather, market variations, transportation disruptions, government actions, logistic difficulties, geology, and asset reliability. CALM has been applied to deal with these types of infrastructure based challenges.

  Read more →
• 

  Sayre's paradox

  Sayre's paradox is a dilemma encountered in the design of automated handwriting recognition systems. A standard statement of the paradox is that a cursively written word cannot be recognized without being segmented and cannot be segmented without being recognized. The paradox was first articulated in a 1973 publication by Kenneth M. Sayre, after whom it was named. == Nature of the problem == It is relatively easy to design automated systems capable of recognizing words inscribed in a printed format. Such words are segmented into letters by the very act of writing them on the page. Given templates matching typical letter shapes in a given language, individual letters can be identified with a high degree of probability. In cases of ambiguity, probable letter sequences can be compared with a selection of properly spelled words in that language (called a lexicon). If necessary, syntactic features of the language can be applied to render a generally accurate identification of the words in question. Printed-character recognition systems of this sort are commonly used in processing standardized government forms, in sorting mail by zip code, and so forth. In cursive writing, however, letters comprising a given word typically flow sequentially without gaps between them. Unlike a sequence of printed letters, cursively connected letters are not segmented in advance. Here is where Sayre's Paradox comes into play. Unless the word is already segmented into letters, template-matching techniques like those described above cannot be applied. That is, segmentation is a prerequisite for word recognition. But there are no reliable techniques for segmenting a word into letters unless the word itself has been identified. Word recognition requires letter segmentation, and letter segmentation requires word recognition. There is no way a cursive writing recognition system employing standard template-matching techniques can do both simultaneously. Advantages to be gained by use of automated cursive writing recognition systems include routing mail with handwritten addresses, reading handwritten bank checks, and automated digitalization of hand-written documents. These are practical incentives for finding ways of circumventing Sayre's Paradox. == Avoiding the paradox == One way of ameliorating the adverse effects of the paradox is to normalize the word inscriptions to be recognized. Normalization amounts to eliminating idiosyncrasies in the penmanship of the writer, such as unusual slope of the letters and unusual slant of the cursive line. This procedure can increase the probability of a correct match with a letter template, resulting in an incremental improvement in the success rate of the system. Since improvement of this sort still depends on accurate segmentation, however, it remains subject to the limitations of Sayre's Paradox. Researchers have come to realize that the only way to circumvent the paradox is by use of procedures that do not rely on accurate segmentation. == Directions of current research == Segmentation is accurate to the extent that it matches distinctions among letters in the actual inscriptions presented to the system for recognition (the input data). This is sometimes referred to as “explicit segmentation”. “Implicit segmentation,” by contrast, is division of the cursive line into more parts than the number of actual letters in the cursive line itself. Processing these “implicit parts” to achieve eventual word identification requires specific statistical procedures involving hidden Markov models (HMM). A Markov model is a statistical representation of a random process, which is to say a process in which future states are independent of states occurring before the present. In such a process, a given state is dependent only on the conditional probability of its following the state immediately before it. An example is a series of outcomes from successive casts of a die. An HMM is a Markov model, individual states of which are not fully known. Conditional probabilities between states are still determinate, but the identities of individual states are not fully disclosed. Recognition proceeds by matching HMMs of words to be recognized with previously prepared HMMs of words in the lexicon. The best match in a given case is taken to indicate the identity of the handwritten word in question. As with systems based on explicit segmentation, automated recognition systems based on implicit segmentation are judged more or less successful according to the percentage of correct identifications they accomplish. Instead of explicit segmentation techniques, most automated handwriting recognition systems today employ implicit segmentation in conjunction with HMM-based matching procedures. The constraints epitomized by Sayre's Paradox are largely responsible for this shift in approach.

  Read more →
• 

  Adversarial stylometry

  Adversarial stylometry is the practice of altering writing style to reduce the potential for stylometry to discover the author's identity or their characteristics. This task is also known as authorship obfuscation or authorship anonymisation. Stylometry poses a significant privacy challenge in its ability to unmask anonymous authors or to link pseudonyms to an author's other identities, which, for example, creates difficulties for whistleblowers, activists, and hoaxers and fraudsters. The privacy risk is expected to grow as machine learning techniques and text corpora develop. All adversarial stylometry shares the core idea of faithfully paraphrasing the source text so that the meaning is unchanged but the stylistic signals are obscured. Such a faithful paraphrase is an adversarial example for a stylometric classifier. Several broad approaches to this exist, with some overlap: imitation, substituting the author's own style for another's; translation, applying machine translation with the hope that this eliminates characteristic style in the source text; and obfuscation, deliberately modifying a text's style to make it not resemble the author's own. Manually obscuring style is possible, but laborious; in some circumstances, it is preferable or necessary. Automated tooling, either semi- or fully-automatic, could assist an author. How best to perform the task and the design of such tools is an open research question. While some approaches have been shown to be able to defeat particular stylometric analyses, particularly those that do not account for the potential of adversariality, establishing safety in the face of unknown analyses is an issue. Ensuring the faithfulness of the paraphrase is a critical challenge for automated tools. It is uncertain if the practice of adversarial stylometry is detectable in itself. Some studies have found that particular methods produced signals in the output text, but a stylometrist who is uncertain of what methods may have been used may not be able to reliably detect them. == History == Rao & Rohatgi (2000), an early work in adversarial stylometry, identified machine translation as a possibility, but noted that the quality of translators available at the time presented severe challenges. Kacmarcik & Gamon (2006) is another early work. Brennan, Afroz & Greenstadt (2012) performed the first evaluation of adversarial stylometric methods on actual texts. Brennan & Greenstadt (2009) introduced the first corpus of adversarially authored texts specifically for evaluating stylometric methods; other corpora include the International Imitation Hemingway Competition, the Faux Faulkner contest, and the hoax blog A Gay Girl in Damascus. == Motivations == Rao & Rohatgi (2000) suggest that short, unattributed documents (i.e., anonymous posts) are not at risk of stylometric identification, but pseudonymous authors who have not practiced adversarial stylometry in producing corpuses of thousands of words may be vulnerable. Narayanan et al. (2012) attempted large-scale deanonymisation of 100,000 blog authors with mixed results: the identifications were significantly better than chance, but only accurately matched the blog and author a fifth of the time; identification improved with the number of posts written by the author in the corpus. Even if an author is not identified, some of their characteristics may still be deduced stylometrically, or stylometry may narrow the anonymity set of potential authors sufficiently for other information to complete the identification. Detecting author characteristics (e.g., gender or age) is often simpler than identifying an author from a large, possibly open, set of candidates. Modern machine learning techniques offer powerful tools for identification; further development of corpora and computational stylometric techniques are likely to raise further privacy issues. Gröndahl & Asokan (2020a) say that the general validity of the hypothesis underlying stylometry—that authors have invariant, content-independent 'style fingerprints'—is uncertain, but "the deanonymisation attack is a real privacy concern". Those interested in practicing adversarial stylometry and stylistic deception include whistleblowers avoiding retribution; journalists and activists; perpetrators of frauds and hoaxes; authors of fake reviews; literary forgers; criminals disguising their identity from investigators; and, generally, anyone with a desire for anonymity or pseudonymity. Authors, or agents acting on behalf of authors, may also attempt to remove stylistic clues to author characteristics (e.g., race or gender) so that knowledge of those characteristics cannot be used for discrimination (e.g., through algorithmic bias). Another possible use for adversarial stylometry is in disguising automatically generated text as human-authored. == Methods == With imitation, the author attempts to mislead stylometry by matching their style to another author's. An incomplete imitation, where some of the true author's unique characteristics appear alongside the imitated author's, can be a detectable signal for the use of adversarial stylometry. Imitation can be performed automatically with style transfer systems, though this typically requires a large corpus in the target style for the system to learn from. Another approach is translation, which employs machine translation of a source text to eliminate characteristic style, often through multiple translators in sequence to produce a round-trip translation. Such chained translation can lead to texts being significantly altered, even to the point of incomprehensibility; improved translation tools reduce this risk. More simply-structured texts can be easier to machine translate without losing the original meaning. Machine translation blurs into direct stylistic imitation or obfuscation achieved through automated style transfer, which can be viewed as a "translation" with the same language as input and output. With low-quality translation tools, an author can be required to manually correct major translation errors while avoiding the hazard of re-introducing stylistic characteristics. Wang, Juola & Riddell (2022) found that gross errors introduced by Google Translate were rare, but more common with several intermediate translations—however, occasional simple or short sentences and misspellings in the source text appeared verbatim in the output, potentially providing an identifying signal. Chain translation can leave characteristic traces of its application in a document, which may allow reconstruction of the intermediate languages used and the number of translation steps performed. Obfuscation involves deliberately changing the style of a text to reduce its similarity to other texts by some metric; this may be performed at the time of writing by conscious modification, or as part of a revision process with feedback from the metric being targeted as an input to decide when the text has been sufficiently obfuscated. In contrast to translation, complex texts can offer more opportunities for effective obfuscation without altering meaning, and likewise genres with more permissible variation allow more obfuscation. However, longer texts are harder to thoroughly obfuscate. Obfuscation can blend into imitation if the author develops a novel target style, distinct from their original style. With respect to masking author characteristics, obfuscation may aim to achieve a union (adding signals for imitated characteristics) or an intersection (removing signals and normalising) of other authors' styles. Avoiding the author's own idiosyncrasies and producing a "normalised" text is a critical obfuscatory step: an author may have a unique tendency to misspell certain words, use particular variants, or to format a document in a characteristic way. Stylometric signals vary in how simply they can be adversarially masked; an author may easily change their vocabulary by conscious choice, but altering the pattern of grammar or the letter frequency in their text may be harder to achieve, though Juola & Vescovi (2011) report that imitation typically succeeds at masking more characteristics than obfuscation. Automated obfuscation may require large amounts of training data written by the author. Concerning automated implementations of adversarial stylometry, two possible implementations are rule-based systems for paraphrasing; and encoder–decoder architectures, where the text passes through an intermediate format that is (intended to be) style-neutral. Another division in automated methods is whether there is feedback from an identification system or not. With such feedback, finding paraphrases for author masking has been characterised as a heuristic search problem, exploring textual variants until the result is stylistically sufficiently far (in the case of obfuscation) or near (in the case of imitation), which then constitutes an adversarial example for that identification system. == Evaluation == How

  Read more →
• 

  Just This Once

  Just This Once is a 1993 romance novel written in the style of Jacqueline Susann by a Macintosh IIcx computer named "Hal" in collaboration with its programmer, Scott French. French reportedly spent $40,000 and 8 years developing an artificial intelligence program to analyze Susann's works and attempt to create a novel that Susann might have written. A legal dispute between the estate of Jacqueline Susann and the publisher resulted in a settlement to split the profits, and the book was referenced in several legal journal articles about copyright laws. The book had two small print runs totaling 35,000 copies, receiving mixed reviews. == Creation == The novel's creation spanned the fields of artificial intelligence, expert systems, and natural language processing. Scott French first scanned and analyzed portions of two books by Jacqueline Susann, Valley of the Dolls and Once Is Not Enough, to determine constituents of Susann's writing style, which French stated was the most difficult task. This analysis extracted several hundred components including frequency and type of sexual acts and sentence structure. "Once you're there, the writer's style emerges, part of her actual personality comes out, and the computer can be programmed to make a story." French also created several thousand rules to govern tone, plotting, scenes, and characters. The text generated by Hal, the computer, was intended to mimic what Susann might have written, although the output required significant editing. French credits Hal's work with "almost 100% of the plot, 100% of the theme and style." French estimates that he wrote 10% of the prose, the computer Hal wrote about 25% of the prose, and the remaining two-thirds was more of a collaboration between the two. A typical scenario to write a scene would involve Hal asking questions that French would answer (for example, Hal might ask about the "cattiness factor" involved in a meeting between two key female characters, and French would reply with a range of 1 to 10), and the computer would then generate a few sentences to which French would make minor edits. The process would repeat for the next few sentences until the scene was written. == Legal issues == Jacqueline Susann's publisher was skeptical of the legality of Just This Once, although French doubted that an author's thought processes could be copyrighted. Susann's estate reportedly threatened to sue Scott French but the parties settled out of court; the settlement involved splitting profits between the parties but the terms of the settlement were not disclosed. The publication of Just This Once raised questions in the legal profession concerning how copyright law applies to computer-generated works derived from an analysis of other copyrighted works, and whether the generation of such works infringes on copyright. The publications on this topic suggested that the copyright laws of the time were ill-equipped to deal with computer-generated creative works. == Reception == The book's publisher Steven Shragis of Carol Group said of the novel, "I'm not going to say this is a great literary work, but it's every bit as good as anything out in this field, and better than an awful lot." The novel received some positive early reviews. In USA Today, novelist Thomas Gifford compared Just This Once to another novel in the same genre, American Star by Jackie Collins. Gifford concluded: "If you do like this stuff, you'd be much, much better off with the one written by the computer." The Dead Jackie Susann Quarterly declared that Susann "would be proud. Lots of money, sleaze, disease, death, oral sex, tragedy and the good girl gone bad." Other reviews were mixed. Publishers Weekly wrote, "If the books of Jacqueline Susann and Harold Robbins seem formulaic, this debut novel of sin and success in Las Vegas outdoes them all. And that, in a way, is the point.... All novelty rests in the conceit of computer authorship, not in the story itself." Library Journal stated "French invested eight years and $50,000 in a scheme to use artificial intelligence to fulfill his authentic, if dubious, desire to generate a trashy novel a la Jacqueline Susann. Shallow, beautiful-people characters are flatly conceived and randomly accessed in a formulaic plot ... a sexy, boring morality tale. Of possible interest to computer buffs for its use of Expert Systems and the virtual promise of more worthy possibilities; others should read Susann." Kirkus Reviews wrote: "The deal here is that author French is not the author, he's just the midwife, having allegedly programmed his computer to write about our times just the way Susann would... almost perfectly capturing glamorous Jackie's turgid but E-Z reading prose style and ultrareliable mix of sex, glitz, dope 'n' despair.... One wonders, though, if French's tale spinning PC will do as well on the talkshows as Jackie did. The computer weenies have been trying to tell us for years, garbage in-garbage out."

  Read more →
• 

  Tea (app)

  Tea, officially Tea Dating Advice, is a dating surveillance mobile phone application that allows women to post personal data about men they are interested in or are currently dating. Founded by Sean Cook, the app rose to prominence in July 2025 after it was the subject of three major data leaks in July and August 2025. It was removed from Apple's App Store in October 2025, but remains available on the Google Play Store. == History == The app enables its users to upload, view, and comment on photos of men, check men's public records, and perform image searches. It also provides the ability to rate and review men, as well as a group chat function. The app uses artificial intelligence to verify that the user is a woman through facial analysis and other personal information to preserve the app as a women-only space. Users are required to submit their photo and an ID to access the app. The company that created the app was founded by businessman and tech capitalist Sean Cook, who stated in July 2025 that he was inspired to create the app because of his mother's experiences from online dating. According to the company, users remain anonymous, and the requirement to upload an ID was removed in 2023. An August 2025 investigation by 404 Media suggested that much of the information given by Cook on the historical background of the company was inaccurate. In July 2025, private messages, other personally identifying information, and approximately 72,000 images were leaked via 4chan. A further 1.1 million private messages were subsequently leaked using a separate security vulnerability; these included intimate conversations about controversial topics such as adultery and other forms of infidelity to their partners, discussions of abortion, phone numbers, meeting locations, and other confidential communications. The app's publishers subsequently revoked the ability to private message users in the app. Shortly after, the app was hidden from search on Android and an interactive, unverified map was also created of those in the files. By 7 August 2025, ten class action lawsuits had been filed. A further leak was reported later that month. Proponents have praised the app as an aid for women's safety by helping them check men for adultery, catfishing, criminal convictions and other "red flag" behaviors. Critics have described the app as a doxing tool and a violation of privacy, an opportunity for defamation against innocent individuals, and a witch hunt. Cook has stated that the company's legal team receives about three legal threats per day. Another mobile app, called TeaOnHer, was created in response of the app’s popularity. It was described as the male version of the Tea app. The app also reported a data breach in August 2025. In October 2025, Apple removed the app from their app store, telling journalists that the removal was due to a failure to meet company terms regarding content moderation and user privacy. Apple also mentioned an excessive amount of complaints, including allegations that the personal information of minors was being shared. The app remains on the Google Play Store.

  Read more →
• 

  DreamLab

  DreamLab was a volunteer computing Android and iOS app launched in 2015 by Imperial College London and the Vodafone Foundation. It was discontinued on 2nd April 2025. == Description == The app helped to research cancer, COVID-19, new drugs and tropical cyclones. To do this, DreamLab accessed part of the device's processing power, with the user's consent, while the owner charged their smartphone, to speed up the calculations of the algorithms from Imperial College London. The aim of the tropical cyclone project was to prepare for climate change risks. Other projects aimed to find existing drugs and food molecules that could help people with COVID-19 and other diseases. The performance of 100,000 smartphones would reach the annual output of all research computers at Imperial College in just three months, with a nightly runtime of six hours. The app was developed in 2015 by the Garvan Institute of Medical Research in Sydney and the Vodafone Foundation. In May 2020, the project had over 490,000 registered users.

  Read more →
• 

  Glossary of machine vision

  The following are common definitions related to the machine vision field. General related fields Machine vision Computer vision Image processing Signal processing == 0-9 == 1394. FireWire is Apple Inc.'s brand name for the IEEE 1394 interface. It is also known as i.Link (Sony's name) or IEEE 1394 (although the 1394 standard also defines a backplane interface). It is a personal computer (and digital audio/digital video) serial bus interface standard, offering high-speed communications and isochronous real-time data services. 1D. One-dimensional. 2D computer graphics. The computer-based generation of digital images—mostly from two-dimensional models (such as 2D geometric models, text, and digital images) and by techniques specific to them. 3D computer graphics. 3D computer graphics are different from 2D computer graphics in that a three-dimensional representation of geometric data is stored in the computer for the purposes of performing calculations and rendering 2D images. Such images may be for later display or for real-time viewing. Despite these differences, 3D computer graphics rely on many of the same algorithms as 2D computer vector graphics in the wire frame model and 2D computer raster graphics in the final rendered display. In computer graphics software, the distinction between 2D and 3D is occasionally blurred; 2D applications may use 3D techniques to achieve effects such as lighting, and primarily 3D may use 2D rendering techniques. 3D scanner. This is a device that analyzes a real-world object or environment to collect data on its shape and possibly color. The collected data can then be used to construct digital, three dimensional models useful for a wide variety of applications. == A == Aberration. Optically, defocus refers to a translation along the optical axis away from the plane or surface of best focus. In general, defocus reduces the sharpness and contrast of the image. What should be sharp, high-contrast edges in a scene become gradual transitions. Algebraic distance or algebraic error. The algebraic distance from a point xi to a curve or surface defined by f ( x , β ) = 0 {\displaystyle f(x,\beta )=0} is the value of f ( x i , β ) {\displaystyle f(x_{i},\beta )} , i.e. the residual in the least squares problem with data point (xi, 0) and model function f. This term is mainly used in computer vision.[1][2] Aperture. In context of photography or machine vision, aperture refers to the diameter of the aperture stop of a photographic lens. The aperture stop can be adjusted to control the amount of light reaching the film or image sensor. aspect ratio (image). The aspect ratio of an image is its displayed width divided by its height (usually expressed as "x:y"). Angular resolution. Describes the resolving power of any image forming device such as an optical or radio telescope, a microscope, a camera, or an eye. Automated optical inspection. == B == Barcode. A barcode (also bar code) is a machine-readable representation of information in a visual format on a surface. Blob discovery. Inspecting an image for discrete blobs of connected pixels (e.g. a black hole in a grey object) as image landmarks. These blobs frequently represent optical targets for machining, robotic capture, or manufacturing failure. Bitmap. A raster graphics image, digital image, or bitmap, is a data file or structure representing a generally rectangular grid of pixels, or points of color, on a computer monitor, paper, or other display device. == C == Camera. A camera is a device used to take pictures, either singly or in sequence. A camera that takes pictures singly is sometimes called a photo camera to distinguish it from a video camera. Camera Link. Camera Link is a serial communication protocol designed for computer vision applications based on the National Semiconductor interface Channel-link. It was designed for the purpose of standardizing scientific and industrial video products including cameras, cables and frame grabbers. The standard is maintained and administered by the Automated Imaging Association, or AIA, the global machine vision industry's trade group. Charge-coupled device. A charge-coupled device (CCD) is a sensor for recording images, consisting of an integrated circuit containing an array of linked, or coupled, capacitors. CCD sensors and cameras tend to be more sensitive, less noisy, and more expensive than CMOS sensors and cameras. CIE 1931 Color Space. In the study of the perception of color, one of the first mathematically defined color spaces was the CIE XYZ color space (also known as CIE 1931 color space), created by the International Commission on Illumination (CIE) in 1931. CMOS. CMOS ("see-moss")stands for complementary metal-oxide semiconductor, is a major class of integrated circuits. CMOS imaging sensors for machine vision are cheaper than CCD sensors but more noisy. CoaXPress. CoaXPress (CXP) is an asymmetric high speed serial communication standard over coaxial cable. CoaXPress combines high speed image data, low speed camera control and power over a single coaxial cable. The standard is maintained by JIIA, the Japan Industrial Imaging Association. Color. The perception of the frequency (or wavelength) of light, and can be compared to how pitch (or a musical note) is the perception of the frequency or wavelength of sound. Color blindness. Also known as color vision deficiency, in humans is the inability to perceive differences between some or all colors that other people can distinguish Color temperature. "White light" is commonly described by its color temperature. A traditional incandescent light source's color temperature is determined by comparing its hue with a theoretical, heated black-body radiator. The lamp's color temperature is the temperature in kelvins at which the heated black-body radiator matches the hue of the lamp. Color vision. CV is the capacity of an organism or machine to distinguish objects based on the wavelengths (or frequencies) of the light they reflect or emit. computer vision. The study and application of methods which allow computers to "understand" image content. Contrast. In visual perception, contrast is the difference in visual properties that makes an object (or its representation in an image) distinguishable from other objects and the background. C-Mount. Standardized adapter for optical lenses on CCD - cameras. C-Mount lenses have a back focal distance 17.5 mm vs. 12.5 mm for "CS-mount" lenses. A C-Mount lens can be used on a CS-Mount camera through the use of a 5 mm extension adapter. C-mount is a 1" diameter, 32 threads per inch mounting thread (1"-32UN-2A.) CS-Mount. Same as C-Mount but the focal point is 5 mm shorter. A CS-Mount lens will not work on a C-Mount camera. CS-mount is a 1" diameter, 32 threads per inch mounting thread. == D == Data matrix. A two dimensional Barcode. Depth of field. In optics, particularly photography and machine vision, the depth of field (DOF) is the distance in front of and behind the subject which appears to be in focus. Depth perception. DP is the visual ability to perceive the world in three dimensions. It is a trait common to many higher animals. Depth perception allows the beholder to accurately gauge the distance to an object. Diaphragm. In optics, a diaphragm is a thin opaque structure with an opening (aperture) at its centre. The role of the diaphragm is to stop the passage of light, except for the light passing through the aperture. == E == Edge detection. ED marks the points in a digital image at which the luminous intensity changes sharply. It also marks the points of luminous intensity changes of an object or spatial-taxon silhouette. Electromagnetic interference. Radio Frequency Interference (RFI) is electromagnetic radiation which is emitted by electrical circuits carrying rapidly changing signals, as a by-product of their normal operation, and which causes unwanted signals (interference or noise) to be induced in other circuits. == F == FireWire. FireWire (also known as i. Link or IEEE 1394) is a personal computer (and digital audio/video) serial bus interface standard, offering high-speed communications. It is often used as an interface for industrial cameras. Fixed-pattern noise. Flat-field correction. Frame grabber. An electronic device that captures individual, digital still frames from an analog video signal or a digital video stream. Fringe Projection Technique. 3D data acquisition technique employing projector displaying fringe pattern on a surface of measured piece, and one or more cameras recording image(s). Field of view. The field of view (FOV) is the part which can be seen by the machine vision system at one moment. The field of view depends from the lens of the system and from the working distance between object and camera. Focus. An image, or image point or region, is said to be in focus if light from object points is converged about as well as possible in the image; conversely, it is out of focus if light is not w

  Read more →
• 

  Trigram

  Trigrams are a special case of the n-gram, where n is 3. They are often used in natural language processing for performing statistical analysis of texts and in cryptography for control and use of ciphers and codes. See results of analysis of "Letter Frequencies in the English Language". == Frequency == Context is very important, varying analysis rankings and percentages are easily derived by drawing from different sample sizes, different authors; or different document types: poetry, science-fiction, technology documentation; and writing levels: stories for children versus adults, military orders, and recipes. Typical cryptanalytic frequency analysis finds that the 16 most common character-level trigrams in English are: Because encrypted messages sent by telegraph often omit punctuation and spaces, cryptographic frequency analysis of such messages includes trigrams that straddle word boundaries. This causes trigrams such as "edt" to occur frequently, even though it may never occur in any one word of those messages. == Examples == The sentence "the quick red fox jumps over the lazy brown dog" has the following word-level trigrams: the quick red quick red fox red fox jumps fox jumps over jumps over the over the lazy the lazy brown lazy brown dog And the word-level trigram "the quick red" has the following character-level trigrams (where an underscore "_" marks a space): the he_ e_q _qu qui uic ick ck_ k_r _re red

  Read more →
• 

  Morphobank

  MorphoBank is a web application for collaborative evolutionary research, specifically phylogenetic systematics or cladistics, on the phenotype. Historically, scientists conducting research on phylogenetic systematics have worked individually or in small groups employing traditional single-user software applications such as MacClade, Mesquite and Nexus Data Editor. As the hypotheses under study have grown more complex, large research teams have assembled to tackle the problem of discovering the Tree of Life for the estimated 4-100 million living species(Wilson 2003, pp. 77–80) and the many thousands more extinct species known from fossils. Because the phenotype is fundamentally visual, and as phenotype-based phylogenetic studies have continued to increase in size, it becomes important that observations be backed up by labeled images. Traditional desktop software applications currently in wide use do not provide robust support for team-based research or for image manipulation and storage. MorphoBank is a particularly important tool for the growing scientific field of phenomics. The development of MorphoBank, which began in 2001, has been funded by the National Science Foundation's Directorates for Geosciences, Biological Sciences and Computer and Information Science and Engineering. The significance of the scientific work on MorphoBank has been featured in the New York Times(here and here), among other publications. == Advantages == Teams of scientists studying phylogenetics to build the Tree of Life assemble large spreadsheets of observations about species (referred to as "matrices"). These teams require simultaneous access by each team member to a single and secure copy of the team's data during a scientific research project. This single copy of the data also changes with great frequency during the data collection phase. Images that can be very helpful for documenting homology statements must be displayed, labeled and shared as homology statements develop. This cannot be accomplished elegantly with a desktop software package alone because in a desktop environment each collaborator is working on his own private copy of project data. Changes made by one participant cannot automatically propagate to others, preventing collaborators from seeing each other's data edits until they are manually (and due to the effort involved, often only periodically) merged into a single "true" dataset. In all but the smallest and most disciplined of teams, file version control and the reconciliation of changes made on multiple copies of the data emerge quickly as significant drags on productivity. MorphoBank is an attempt to address these issues by leveraging the ubiquity of the web and modern web-based application techniques, including Ajax, web service layers, and rich web applications to provide a full-featured, net-accessible collaborative workspace for phylogenetic research. In particular, MorphoBank makes it easy to: Share all kinds of data with geographically separated team members, including taxonomy, character and specimen data, media (including images, video and audio), phylogenetic matrices (including data in the widely used NEXUS and TNT format) and other data such as documents and genetic sequences. Label high-resolution images using a web-based image annotation application. Collaboratively edit project data such as phylogenetic matrices using a built-in web-based matrix editor. The editor allows the linking of labeled images to individual cells of a matrix. Manage access to project data. Access ranges from full-access for team members to anonymous read-only access for potential reviewers. Publish completed project data on the web in support of a published paper with a persistent URL. Search The Encyclopedia of Life for taxon exemplar images. Store high resolution CT data Create ontologies for updating and populating matrix cells. These tasks are difficult or impossible in most existing software applications. == History == In 2001 the National Science Foundation (NSF) sponsored a workshop, at the American Museum of Natural History in New York to develop the outlines of a web-based system for a collaborative, media-rich research tool for morphological phylogenetics. An application prototype presented at the workshop was later refined with feedback from the workshop and became MorphoBank version 1.0. A grant from the US National Oceanic and Atmospheric Administration funded further revisions resulting in version 2.0, released in 2005. Current support from the NSF is funding current feature enhancements to MorphoBank. MorphoBank was hosted by Stony Brook University until late October 2021 and received back up support from the American Museum of Natural History. The current version is 3.0. Rationale for the software was described in the journal Cladistics. MorphoBank has also received support from NESCENT and the San Diego Supercomputer Center. Since 2018, MorphoBank has been supported in part by Phoenix Bioinformatics, a non-profit company founded to sustain databases for the basic sciences. A permanent move of MorphoBank from Stony Brook University to Phoenix Bioinformatics was complete in late October 2021. The San Diego Supercomputer Center has previously provided technical and hosting resources to the MorphoBank project. == Usage == MorphoBank hosts the products of peer-reviewed scientific research on phenotypes. An increasing volume of systematics data is "born digital" and MorphoBank is well suited to handle this type of material. On August 24, 2007, 62 active research projects were hosted by MorphoBank, as well as 6 completed (and published) projects. By 2017 over 2000 scientists and their students were registered content builders (users are not required to register and are even more numerous) and has more than 500 publicly available projects with approximately 80,000 images that are the products of scientific research. Over 1,500 active research projects are hosted by MorphoBank. The software has been used to assemble phylogenetic research on such groups as mammals, from bats to whales, bivalve molluscs, arachnids, fossil plants and living and extinct amniotes. It has also been used more broadly in evolutionary and paleontological research to host curated images associated with published research on lacewing insects geckos, raptor birds, dinosaurs, frogs and nematodes. MorphoBank is increasingly used in conjunction with the Paleobiology Database. Example published projects: Project 1097: Blank CE, 2013 Origin and early evolution of photosynthetic eukaryotes in freshwater environments – reinterpreting proterozoic paleobiology and biogeochemical processes in light of trait evolution Project 2520: Carvalho, T. P., R. E. Reis, and J. P. Friel, 2017 A new species of Hoplomyzon (Siluriformes: Aspredinidae) from Maracaibo Basin, Venezuela: osteological description using high-resolution Project 2651: Baron, M. G., Norman, D. B., Barrett, P. M., 2017 A new hypothesis of dinosaur relationships and early dinosaur evolution MorphoBank has been particularly important to the Assembling the Tree of Life initiative sponsored by the National Science Foundation. MorphoBank is well-suited to such projects because of its tools for merging taxonomic, character and matrix-based data, as well as its collaborative features. Highlights of this research include a collaborative matrix on mammal evolution published in Science that included over 4,000 phenomic characters scored for over 80 species, a matrix on extant baleen whales featuring nearly 600 images, and more.

  Read more →
• 

  Talking Angela

  Talking Angela is a mobile game (formerly a chatbot), developed by Slovenian studio Outfit7 as part of the Talking Tom & Friends series. It was released on 13 November 2012 and December 2012 for iPhone, iPod and iPad, January 2013 for Android, and January 2014 for Google Play. The game's successor, the My Talking Angela game, was released in December 2014. The game takes place in a café in Paris and allows players to interact with Angela, an anthropomorphic white cat in different ways. Players can use coins to purchase makeup, accessories and items, as well as drinks that will trigger different visual effects. The fortune cookie button causes Angela to read out a fortune cookie, while the bird icon will prompt birds to fly around the screen, or have Angela feed them. Players can also pet or poke Angela, as well the café's sign. Prior to their removal, the game featured a chat system and a camera button. Users can engage in conversations with Angela, ask for quizzes or initiate a short snippet of the song "That's Falling In Love". If the player was to type in "Who is an idiot?", Angela would respond with a random swear word. Additionally, inquiring Angela about sexual topics would cause her to reply with "Do you want to talk about sex?", though she will quickly change the topic regardless of what the player writes next. A hoax claiming that Angela's eyes were hidden cameras that enabled hackers or paedophiles to watch children was spread. Despite the claims, Snopes and The Guardian found no evidence. Due to the hoax, Angela received a blue dress, as well as an altered eye asset with a different reflection, and later the chat and camera functions were removed altogether. == Hoaxes == In February 2014, Talking Angela was the subject of an Internet hoax alleging that the application was a front for child predators to exploit children. The rumor, which was widely circulated on Facebook and various websites claiming to be dedicated to parenting, claims that a sinister sexual predator or hacker, asked children for private personal information using the game's text-chat feature. Other versions of the rumour even attributed the disappearance of a child to the game; one news report claimed that a seven year old boy disappeared after downloading the app. Another variation included that it was run by a paedophile ring, citing a man that could be seen in Angela's eyes. The app's developers, Outfit7, later gave a statement refuting the hoaxes. The hoax was eventually debunked by Snopes, a fact-checking website. The site's owners, Barbara and David Mikkelson, reported that they had tried to "prompt" it to give responses asking for private information, but were unsuccessful, even when asking it explicitly sexual questions. While it is true that, in the game with child mode off, Angela does ask for the user's name, age and personal preferences to determine conversation topics, Outfit7 has said that this information is all "anonymized" and all personal information is removed from it. It is also impossible for a person to take control of what Angela says in the game, since the game is based on chatbot software. When the mode was turned on, the chat feature was disabled, meaning no personal questions could be asked. In 2015, the hoax was revived on Facebook, which prompted online security company Sophos and The Guardian to debunk it again. Sophos employee Paul Ducklin wrote that the message being posted on Facebook promoting the hoax was "close to 600 rambling, repetitious words, despite claiming at the start that it didn't have words to describe the situation. It's ill-written, and borders on being illiterate and incomprehensible." Bruce Wilcox, one of the game's programmers, attributed the hoax's popularity to the fact that the chatbot program in Talking Angela aimed to sound realistic. Concern was raised that the game's child mode may have been too easy for children to turn off. It allowed them to purchase "coins", premium currency in the game, via iTunes, and enabled the chat feature. While not "connecting your children to paedophiles", this still raised concerns according to The Guardian. === Impact === The scare significantly boosted the game's popularity, and was credited with helping the app enter the top 10 free iPhone apps soon after the hoax became widely known in February 2015,In the truth the reason there is a man in Angela’s eyes is because of pareidoila, the ability to see through diamonds and other minerals and water bodies and shiny objects,which is the reason why players notice a man in her eyes,The truth is that being Angela’s eyes simply serve as a reflective surface,Because of the low quality of this reflection the reflection was mistaken for a humanoid figure. oref>Smith, Josh (19 February 2014). "Talking Angela App Scare Skyrockets App to Top of Charts". GottaBeMobile.com. Archived from the original on 2 April 2016. Retrieved 10 May 2014. and third most popular for all iPhone apps at the start of the following month. In 2016, Outfit7 removed the chat feature along with the camera function from the app due to this controversy, though this decision was met with criticism.

  Read more →
• 

  Inverse depth parametrization

  In computer vision, the inverse depth parametrization is a parametrization used in methods for 3D reconstruction from multiple images such as simultaneous localization and mapping (SLAM). Given a point p {\displaystyle \mathbf {p} } in 3D space observed by a monocular pinhole camera from multiple views, the inverse depth parametrization of the point's position is a 6D vector that encodes the optical centre of the camera c 0 {\displaystyle \mathbf {c} _{0}} when in first observed the point, and the position of the point along the ray passing through p {\displaystyle \mathbf {p} } and c 0 {\displaystyle \mathbf {c} _{0}} . Inverse depth parametrization generally improves numerical stability and allows to represent points with zero parallax. Moreover, the error associated to the observation of the point's position can be modelled with a Gaussian distribution when expressed in inverse depth. This is an important property required to apply methods, such as Kalman filters, that assume normality of the measurement error distribution. The major drawback is the larger memory consumption, since the dimensionality of the point's representation is doubled. == Definition == Given 3D point p = ( x , y , z ) {\displaystyle \mathbf {p} =(x,y,z)} with world coordinates in a reference frame ( e 1 , e 2 , e 3 ) {\displaystyle (e_{1},e_{2},e_{3})} , observed from different views, the inverse depth parametrization y {\displaystyle \mathbf {y} } of p {\displaystyle \mathbf {p} } is given by: y = ( x 0 , y 0 , z 0 , θ , ϕ , ρ ) {\displaystyle \mathbf {y} =(x_{0},y_{0},z_{0},\theta ,\phi ,\rho )} where the first five components encode the camera pose in the first observation of the point, being c 0 = ( x 0 , y 0 , z 0 ) {\displaystyle \mathbf {c_{0}} =(x_{0},y_{0},z_{0})} the optical centre, ϕ {\displaystyle \phi } the azimuth, θ {\displaystyle \theta } the elevation angle, and ρ = 1 ‖ p − c 0 ‖ {\displaystyle \rho ={\frac {1}{\left\Vert \mathbf {p} -\mathbf {c} _{0}\right\Vert }}} the inverse depth of p {\displaystyle p} at the first observation.

  Read more →
• 

  Weak supervision

  Weak supervision (also known as semi-supervised learning) is a paradigm in machine learning, the relevance and notability of which increased with the advent of large language models due to the large amount of data required to train them. It is characterized by using a combination of a small amount of human-labeled data (exclusively used in more expensive and time-consuming supervised learning paradigm), followed by a large amount of unlabeled data (used exclusively in unsupervised learning paradigm). In other words, the desired output values are provided only for a subset of the training data. The remaining data is unlabeled or imprecisely labeled. Intuitively, it can be seen as an exam and labeled data as sample problems that the teacher solves for the class as an aid in solving another set of problems. In the transductive setting, these unsolved problems act as exam questions. In the inductive setting, they become practice problems of the sort that will make up the exam. == Problem == The acquisition of labeled data for a learning problem often requires a skilled human agent (e.g. to transcribe an audio segment) or a physical experiment (e.g. determining the 3D structure of a protein or determining whether there is oil at a particular location). The cost associated with the labeling process thus may render large, fully labeled training sets infeasible, whereas acquisition of unlabeled data is relatively inexpensive. In such situations, semi-supervised learning can be of great practical value. Semi-supervised learning is also of theoretical interest in machine learning and as a model for human learning. == Technique == More formally, semi-supervised learning assumes a set of l {\displaystyle l} independently identically distributed examples x 1 , … , x l ∈ X {\displaystyle x_{1},\dots ,x_{l}\in X} with corresponding labels y 1 , … , y l ∈ Y {\displaystyle y_{1},\dots ,y_{l}\in Y} and u {\displaystyle u} unlabeled examples x l + 1 , … , x l + u ∈ X {\displaystyle x_{l+1},\dots ,x_{l+u}\in X} are processed. Semi-supervised learning combines this information to surpass the classification performance that can be obtained either by discarding the unlabeled data and doing supervised learning or by discarding the labels and doing unsupervised learning. Semi-supervised learning may refer to either transductive learning or inductive learning. The goal of transductive learning is to infer the correct labels for the given unlabeled data x l + 1 , … , x l + u {\displaystyle x_{l+1},\dots ,x_{l+u}} only. The goal of inductive learning is to infer the correct mapping from X {\displaystyle X} to Y {\displaystyle Y} . It is unnecessary (and, according to Vapnik's principle, imprudent) to perform transductive learning by way of inferring a classification rule over the entire input space; however, in practice, algorithms formally designed for transduction or induction are often used interchangeably. == Assumptions == In order to make any use of unlabeled data, some relationship to the underlying distribution of data must exist. Semi-supervised learning algorithms make use of at least one of the following assumptions: === Continuity / smoothness assumption === Points that are close to each other are more likely to share a label. This is also generally assumed in supervised learning and yields a preference for geometrically simple decision boundaries. In the case of semi-supervised learning, the smoothness assumption additionally yields a preference for decision boundaries in low-density regions, so few points are close to each other but in different classes. === Cluster assumption === The data tend to form discrete clusters, and points in the same cluster are more likely to share a label (although data that shares a label may spread across multiple clusters). This is a special case of the smoothness assumption and gives rise to feature learning with clustering algorithms. === Manifold assumption === The data lie approximately on a manifold of much lower dimension than the input space. In this case learning the manifold using both the labeled and unlabeled data can avoid the curse of dimensionality. Then learning can proceed using distances and densities defined on the manifold. The manifold assumption is practical when high-dimensional data are generated by some process that may be hard to model directly, but which has only a few degrees of freedom. For instance, human voice is controlled by a few vocal folds, and images of various facial expressions are controlled by a few muscles. In these cases, it is better to consider distances and smoothness in the natural space of the generating problem, rather than in the space of all possible acoustic waves or images, respectively. == History == The heuristic approach of self-training (also known as self-learning or self-labeling) is historically the oldest approach to semi-supervised learning, with examples of applications starting in the 1960s. The transductive learning framework was formally introduced by Vladimir Vapnik in the 1970s. Interest in inductive learning using generative models also began in the 1970s. A probably approximately correct learning bound for semi-supervised learning of a Gaussian mixture was demonstrated by Ratsaby and Venkatesh in 1995. == Methods == === Generative models === Generative approaches to statistical learning first seek to estimate p ( x | y ) {\displaystyle p(x|y)} , the distribution of data points belonging to each class. The probability p ( y | x ) {\displaystyle p(y|x)} that a given point x {\displaystyle x} has label y {\displaystyle y} is then proportional to p ( x | y ) p ( y ) {\displaystyle p(x|y)p(y)} by Bayes' rule. Semi-supervised learning with generative models can be viewed either as an extension of supervised learning (classification plus information about p ( x ) {\displaystyle p(x)} ) or as an extension of unsupervised learning (clustering plus some labels). Generative models assume that the distributions take some particular form p ( x | y , θ ) {\displaystyle p(x|y,\theta )} parameterized by the vector θ {\displaystyle \theta } . If these assumptions are incorrect, the unlabeled data may actually decrease the accuracy of the solution relative to what would have been obtained from labeled data alone. However, if the assumptions are correct, then the unlabeled data necessarily improves performance. The unlabeled data are distributed according to a mixture of individual-class distributions. In order to learn the mixture distribution from the unlabeled data, it must be identifiable, that is, different parameters must yield different summed distributions. Gaussian mixture distributions are identifiable and commonly used for generative models. The parameterized joint distribution can be written as p ( x , y | θ ) = p ( y | θ ) p ( x | y , θ ) {\displaystyle p(x,y|\theta )=p(y|\theta )p(x|y,\theta )} by using the chain rule. Each parameter vector θ {\displaystyle \theta } is associated with a decision function f θ ( x ) = argmax y p ( y | x , θ ) {\displaystyle f_{\theta }(x)={\underset {y}{\operatorname {argmax} }}\ p(y|x,\theta )} . The parameter is then chosen based on fit to both the labeled and unlabeled data, weighted by λ {\displaystyle \lambda } : argmax Θ ( log ⁡ p ( { x i , y i } i = 1 l | θ ) + λ log ⁡ p ( { x i } i = l + 1 l + u | θ ) ) {\displaystyle {\underset {\Theta }{\operatorname {argmax} }}\left(\log p(\{x_{i},y_{i}\}_{i=1}^{l}|\theta )+\lambda \log p(\{x_{i}\}_{i=l+1}^{l+u}|\theta )\right)} === Low-density separation === Another major class of methods attempts to place boundaries in regions with few data points (labeled or unlabeled). One of the most commonly used algorithms is the transductive support vector machine, or TSVM (which, despite its name, may be used for inductive learning as well). Whereas support vector machines for supervised learning seek a decision boundary with maximal margin over the labeled data, the goal of TSVM is a labeling of the unlabeled data such that the decision boundary has maximal margin over all of the data. In addition to the standard hinge loss ( 1 − y f ( x ) ) + {\displaystyle (1-yf(x))_{+}} for labeled data, a loss function ( 1 − | f ( x ) | ) + {\displaystyle (1-|f(x)|)_{+}} is introduced over the unlabeled data by letting y = sign ⁡ f ( x ) {\displaystyle y=\operatorname {sign} {f(x)}} . TSVM then selects f ∗ ( x ) = h ∗ ( x ) + b {\displaystyle f^{}(x)=h^{}(x)+b} from a reproducing kernel Hilbert space H {\displaystyle {\mathcal {H}}} by minimizing the regularized empirical risk: f ∗ = argmin f ( ∑ i = 1 l ( 1 − y i f ( x i ) ) + + λ 1 ‖ h ‖ H 2 + λ 2 ∑ i = l + 1 l + u ( 1 − | f ( x i ) | ) + ) {\displaystyle f^{}={\underset {f}{\operatorname {argmin} }}\left(\displaystyle \sum _{i=1}^{l}(1-y_{i}f(x_{i}))_{+}+\lambda _{1}\|h\|_{\mathcal {H}}^{2}+\lambda _{2}\sum _{i=l+1}^{l+u}(1-|f(x_{i})|)_{+}\right)} An exact solution is intractable due to the non-convex term ( 1 − | f ( x ) | ) + {\displayst

  Read more →
• 

  Cyber and Information Domain Service

  The Cyber and Information Domain Service (CIDS; German: Cyber- und Informationsraum, lit. 'Cyber and Information space', pronounced [ˈsaɪbɐ ʔʊnt ʔɪnfɔʁmaˈtsi̯oːnsʁaʊm] ; CIR) is the youngest branch of the German Armed Forces, the Bundeswehr. The decision to form an organizational unit was presented by Defense Minister Ursula von der Leyen on 26 April 2016, becoming operational on 1 April 2017. It is headquartered in Bonn. == History == In November 2015, the German Ministry of Defense activated a Staff Group within the ministry tasked with developing plans for a reorganization of the Cyber, IT, military intelligence, geo-information, and operative communication units of the Bundeswehr. On 26 April 2016, Defense Minister Ursula von der Leyen presented the plans for the new military branch to the public and on 5 October 2016 the command's staff became operational as a department within the ministry of defense. On 1 April 2017, the Cyber and Information Domain Service (CIDS) was activated as a "military organizational unit" (Organisationsbereich), indicating its status below a full service branch. The CIDS Headquarters took command of all existing electronic warfare, signals, IT, military intelligence, geoinformation, and psychological operations units. As part of a wider restructuring of higher command in the Bundeswehr in 2024, it was decided to upgrade it from a military organizational unit to the fourth full military service branch, alongside Heer (army), Luftwaffe (air force) and Deutsche Marine (navy). == Organisation == The CIDS is commanded by the Chief of the Cyber and Information Domain Service (Inspekteur des Cyber- und Informationsraum InspCIR), a three-star general position, based in Bonn. As of April 2023, it is structured as follows: Cyber and Information Domain Service Command (Kommando Cyber- und Informationsraum KdoCIR), in Bonn Reconnaissance and Effects Command (Kommando Aufklärung und Wirkung KdoAufkl/Wirk), in Gelsdorf 911th Electronic Warfare Battalion 912th Electronic Warfare Battalion, mans the Oste-class SIGINT/ELINT and reconnaissance ships 931st Electronic Warfare Battalion 932nd Electronic Warfare Battalion, provides airborne troops for operations in enemy territory Cyber-Operations Centre (Zentrum Cyber-Operationen ZSO) Central Imaging Reconnaissance (Zentrale Abbildende Aufklärung ZAbbAufkl), operating the SAR-Lupe satellites Central Bundeswehr Investigation Authority for Technical Reconnaissance (Zentrale Untersuchungsstelle der Bundeswehr für Technische Aufklärung ZU-StelleBwTAufkl) Signals Reconnaissance Centre North (Fernmeldeaufklärungszentrale Nord FmAufklZentr NORD) Signals Reconnaissance Centre South (Fernmeldeaufklärungszentrale Süd FmAufklZentr SÜD) Information Technology Services Command (Kommando Informationstechnik-Services der Bundeswehr KdoIT-SBw), in Bonn 281st Information Technology Battalion 282nd Information Technology Battalion 292nd Information Technology Battalion 293rd Information Technology Battalion 381st Information Technology Battalion 383rd Information Technology Battalion Bundeswehr Geoinformation Centre (Zentrum für Geoinformationswesen der Bundeswehr), in Euskirchen Bundeswehr Cyber-Security Centre (Zentrum für Cyber-Sicherheit der Bundeswehr ZCSBw) Bundeswehr Software Digitalisation Centre (Zentrum Digitalisierung der Bundeswehr und Fähigkeitsentwicklung Cyber- und Informationsraum ZDigBw) Bundeswehr Operational Communications Centre (Zentrum Operative Kommunikation der Bundeswehr ZOpKomBw) Training Centre CIDS (Ausbildungszentrum CIR AusbZ CIR)

  Read more →
• 

  Text normalization

  Text normalization is the process of transforming text into a single canonical form that it might not have had before. Normalizing text before storing or processing it allows for separation of concerns, since input is guaranteed to be consistent before operations are performed on it. Text normalization requires being aware of what type of text is to be normalized and how it is to be processed afterwards; there is no all-purpose normalization procedure. == Applications == Text normalization is frequently used when converting text to speech. Numbers, dates, acronyms, and abbreviations are non-standard "words" that need to be pronounced differently depending on context. For example: "$200" would be pronounced as "two hundred dollars" in English, but as "lua selau tālā" in Samoan. "vi" could be pronounced as "vie," "vee," or "the sixth" depending on the surrounding words. Text can also be normalized for storing and searching in a database. For instance, if a search for "resume" is to match the word "résumé," then the text would be normalized by removing diacritical marks; and if "john" is to match "John", the text would be converted to a single case. To prepare text for searching, it might also be stemmed (e.g. converting "flew" and "flying" both into "fly"), canonicalized (e.g. consistently using American or British English spelling), or have stop words removed. == Techniques == For simple, context-independent normalization, such as removing non-alphanumeric characters or diacritical marks, regular expressions would suffice. For example, the sed script sed ‑e "s/\s+/ /g" inputfile would normalize runs of whitespace characters into a single space. More complex normalization requires correspondingly complicated algorithms, including domain knowledge of the language and vocabulary being normalized. Among other approaches, text normalization has been modeled as a problem of tokenizing and tagging streams of text and as a special case of machine translation. == Textual scholarship == In the field of textual scholarship and the editing of historic texts, the term "normalization" implies a degree of modernization and standardization – for example in the extension of scribal abbreviations and the transliteration of the archaic glyphs typically found in manuscript and early printed sources. A normalized edition is therefore distinguished from a diplomatic edition (or semi-diplomatic edition), in which some attempt is made to preserve these features. The aim is to strike an appropriate balance between, on the one hand, rigorous fidelity to the source text (including, for example, the preservation of enigmatic and ambiguous elements); and, on the other, producing a new text that will be comprehensible and accessible to the modern reader. The extent of normalization is therefore at the discretion of the editor, and will vary. Some editors, for example, choose to modernize archaic spellings and punctuation, but others do not. An edition of a text might be normalized based on internal criteria, where orthography is standardized according to the language of the original, or external criteria, where the norms of a different time period are applied. For an example of the latter, a published edition of a medieval Icelandic manuscript might be normalized to the conventions of modern Icelandic, or it might be normalized to Classical Old Icelandic. Standards of normalization vary based on language of the edition as well as the specific conventions of the publisher.

  Read more →
• 

  Bigram

  A bigram or digram is a sequence of two adjacent elements from a string of tokens, which are typically letters, syllables, or words. A bigram is an n-gram for n=2. The frequency distribution of every bigram in a string is commonly used for simple statistical analysis of text in many applications, including in computational linguistics, cryptography, and speech recognition. Gappy bigrams or skipping bigrams are word pairs which allow gaps (perhaps avoiding connecting words, or allowing some simulation of dependencies, as in a dependency grammar). == Applications == Bigrams, along with other n-grams, are used in most successful language models for speech recognition. Bigram frequency attacks can be used in cryptography to solve cryptograms. See frequency analysis. Bigram frequency is one approach to statistical language identification. Some activities in logology or recreational linguistics involve bigrams. These include attempts to find English words beginning with every possible bigram, or words containing a string of repeated bigrams, such as logogogue. == Bigram frequency in the English language == The frequency of the most common letter bigrams in a large English corpus is: th 3.56% of 1.17% io 0.83% he 3.07% ed 1.17% le 0.83% in 2.43% is 1.13% ve 0.83% er 2.05% it 1.12% co 0.79% an 1.99% al 1.09% me 0.79% re 1.85% ar 1.07% de 0.76% on 1.76% st 1.05% hi 0.76% at 1.49% to 1.05% ri 0.73% en 1.45% nt 1.04% ro 0.73% nd 1.35% ng 0.95% ic 0.70% ti 1.34% se 0.93% ne 0.69% es 1.34% ha 0.93% ea 0.69% or 1.28% as 0.87% ra 0.69% te 1.20% ou 0.87% ce 0.65%

  Read more →