AI Image Generators

Explore the best AI Image Generators — independent reviews, comparisons, pricing and step-by-step how-to guides, curated by Aizhi.

• 

  Frame grabber

  A frame grabber is an electronic device that captures (i.e., "grabs") individual, digital still frames from an analog video signal or a digital video stream. It is usually employed as a component of a computer vision system, in which video frames are captured in digital form and then displayed, stored, transmitted, analyzed, or combinations of these. Historically, frame grabber expansion cards were the predominant way to interface cameras to PCs. Other interface methods have emerged since then, with frame grabbers (and in some cases, cameras with built-in frame grabbers) connecting to computers via interfaces such as USB, Ethernet and IEEE 1394 ("FireWire"). Early frame grabbers typically had only enough memory to store a single digitized video frame, whereas many modern frame grabbers can store multiple frames. Modern frame grabbers often are able to perform functions beyond capturing a single video input. For example, some devices capture audio in addition to video, and some devices provide, and concurrently capture frames from multiple video inputs. Other operations may be performed as well, such as deinterlacing, text or graphics overlay, image transformations (e.g., resizing, rotation, mirroring), and conversion to JPEG or other compressed image formats. To satisfy the technological demands of applications such as radar acquisition, manufacturing and remote guidance, some frame grabbers can capture images at high frame rates, high resolutions, or both. == Circuitry == Analog frame grabbers, which accept and process analog video signals, include these circuits: Input signal conditioner that buffers the analog video input signal to protect downstream circuitry Video decoder that converts SD analog video (e.g., NTSC, SECAM, PAL) or HD analog video (e.g., AHD, HD-TVI, HD-CVI) to a digital format Digital frame grabbers, which accept and process digital video streams, include these circuits: Digital video decoder that interfaces to and converts a specific type of digital video source, such as Camera Link, CoaXPress, DVI, GigE Vision, LVDS, or SDI Circuitry common to both analog and digital frame grabbers: Memory for storing the acquired image (i.e., a frame buffer) A bus interface through which a processor can control the acquisition and access the data General purpose I/O for triggering image acquisition or controlling external equipment == Applications == === Healthcare === Frame grabbers are used in medicine for many applications, including telenursing and remote guidance. In situations where an expert at another location needs to be consulted, frame grabbers capture the image or video from the appropriate medical equipment, so it can be sent digitally to the distant expert. === Manufacturing === "Pick and place" machines are often used to mount electronic components on circuit boards during the circuit board assembly process. Such machines use one or more cameras to monitor the robotics that places the components. Each camera is paired with a frame grabber that digitizes the analog video, thus converting the video to a form that can be processed by the machine software. === Network security === Frame grabbers may be used in security applications. For example, when a potential breach of security is detected, a frame grabber captures an image or a sequence of images, and then the images are transmitted across a digital network where they are recorded and viewed by security personnel. === Personal use === In recent years with the rise of personal video recorders like camcorders, mobile phones, etc. video and photo applications have gained ascending prominence. Frame grabbing is becoming very popular on these devices. === Astronomy & astrophotography === Amateur astronomers and astrophotographers use frame grabbers when using analog "low light" cameras for live image display and internet video broadcasting of celestial objects. Frame grabbers are essential to connect the analog cameras used in this application to the computers that store or process the images.

  Read more →
• 

  Key (cryptography)

  A key in cryptography is a piece of information, usually a string of numbers or letters that are stored in a file, which, when processed through a cryptographic algorithm, can encode or decode cryptographic data. Based on the used method, the key can be different sizes and varieties, but in all cases, the strength of the encryption relies on the security of the key being maintained. A key's security strength is dependent on its algorithm, the size of the key, the generation of the key, and the process of key exchange. == Scope == The key is what is used to encrypt data from plaintext to ciphertext. There are different methods for utilizing keys and encryption. === Symmetric cryptography === Symmetric cryptography refers to the practice of the same key being used for both encryption and decryption. === Asymmetric cryptography === Asymmetric cryptography has separate keys for encrypting and decrypting. These keys are known as the public and private keys, respectively. == Purpose == Since the key protects the confidentiality and integrity of the system, it is important to be kept secret from unauthorized parties. With public key cryptography, only the private key must be kept secret, but with symmetric cryptography, it is important to maintain the confidentiality of the key. Kerckhoff's principle states that the entire security of the cryptographic system relies on the secrecy of the key. == Key sizes == Key size is the number of bits in the key defined by the algorithm. This size defines the upper bound of the cryptographic algorithm's security. The larger the key size, the longer it will take before the key is compromised by a brute force attack. Since perfect secrecy is not feasible for key algorithms, researches are now more focused on computational security. In the past, keys were required to be a minimum of 40 bits in length, however, as technology advanced, these keys were being broken quicker and quicker. As a response, restrictions on symmetric keys were enhanced to be greater in size. Currently, 2048 bit RSA is commonly used, which is sufficient for current systems. However, current RSA key sizes would all be cracked quickly with a powerful quantum computer. "The keys used in public key cryptography have some mathematical structure. For example, public keys used in the RSA system are the product of two prime numbers. Thus public key systems require longer key lengths than symmetric systems for an equivalent level of security. 3072 bits is the suggested key length for systems based on factoring and integer discrete logarithms which aim to have security equivalent to a 128 bit symmetric cipher." == Key generation == To prevent a key from being guessed, keys need to be generated randomly and contain sufficient entropy. The problem of how to safely generate random keys is difficult and has been addressed in many ways by various cryptographic systems. A key can directly be generated by using the output of a Random Bit Generator (RBG), a system that generates a sequence of unpredictable and unbiased bits. A RBG can be used to directly produce either a symmetric key or the random output for an asymmetric key pair generation. Alternatively, a key can also be indirectly created during a key-agreement transaction, from another key or from a password. Some operating systems include tools for "collecting" entropy from the timing of unpredictable operations such as disk drive head movements. For the production of small amounts of keying material, ordinary dice provide a good source of high-quality randomness. == Establishment scheme == The security of a key is dependent on how a key is exchanged between parties. Establishing a secured communication channel is necessary so that outsiders cannot obtain the key. A key establishment scheme (or key exchange) is used to transfer an encryption key among entities. Key agreement and key transport are the two types of a key exchange scheme that are used to be remotely exchanged between entities . In a key agreement scheme, a secret key, which is used between the sender and the receiver to encrypt and decrypt information, is set up to be sent indirectly. All parties exchange information (the shared secret) that permits each party to derive the secret key material. In a key transport scheme, encrypted keying material that is chosen by the sender is transported to the receiver. Either symmetric key or asymmetric key techniques can be used in both schemes. The Diffie–Hellman key exchange and Rivest-Shamir-Adleman (RSA) are the most two widely used key exchange algorithms. In 1976, Whitfield Diffie and Martin Hellman constructed the Diffie–Hellman algorithm, which was the first public key algorithm. The Diffie–Hellman key exchange protocol allows key exchange over an insecure channel by electronically generating a shared key between two parties. On the other hand, RSA is a form of the asymmetric key system which consists of three steps: key generation, encryption, and decryption. Key confirmation delivers an assurance between the key confirmation recipient and provider that the shared keying materials are correct and established. The National Institute of Standards and Technology recommends key confirmation to be integrated into a key establishment scheme to validate its implementations. == Management == Key management concerns the generation, establishment, storage, usage and replacement of cryptographic keys. A key management system (KMS) typically includes three steps of establishing, storing and using keys. The base of security for the generation, storage, distribution, use and destruction of keys depends on successful key management protocols. == Key vs password == A password is a memorized series of characters including letters, digits, and other special symbols that are used to verify identity. It is often produced by a human user or a password management software to protect personal and sensitive information or generate cryptographic keys. Passwords are often created to be memorized by users and may contain non-random information such as dictionary words. On the other hand, a key can help strengthen password protection by implementing a cryptographic algorithm which is difficult to guess or replace the password altogether. A key is generated based on random or pseudo-random data and can often be unreadable to humans. A password is less safe than a cryptographic key due to its low entropy, randomness, and human-readable properties. However, the password may be the only secret data that is accessible to the cryptographic algorithm for information security in some applications such as securing information in storage devices. Thus, a deterministic algorithm called a key derivation function (KDF) uses a password to generate the secure cryptographic keying material to compensate for the password's weakness. Various methods such as adding a salt or key stretching may be used in the generation.

  Read more →
• 

  CryptoParty

  CryptoParty (Crypto-Party) is a grassroots global endeavour to introduce the basics of practical cryptography such as the Tor anonymity network, I2P, Freenet, key signing parties, disk encryption and virtual private networks to the general public. The project primarily consists of a series of free public workshops. == History == As a successor to the Cypherpunks of the 1990s, CryptoParty was conceived in late August 2012 by the Australian journalist Asher Wolf in a Twitter post following the passing of the Cybercrime Legislation Amendment Bill 2011 and the proposal of a two-year data retention law in that country, the Cybercrime Legislation Amendment Bill 2011. The DIY, self-organizing movement immediately went viral, with a dozen autonomous CryptoParties being organized within hours in cities throughout Australia, the US, the UK, and Germany. Many more parties were soon organized or held in Chile, The Netherlands, Hawaii, Asia, etc. Tor usage in Australia itself spiked, and CryptoParty London with 130 attendees—some of whom were veterans of the Occupy London movement—had to be moved from London Hackspace to the Google campus in east London's Tech City. As of mid-October 2012 some 30 CryptoParties have been held globally, some on a continuing basis, and CryptoParties were held on the same day in Reykjavik, Brussels, and Manila. The first draft of the 442-page CryptoParty Handbook (the hard copy of which is available at cost) was pulled together in three days using the book sprint approach, and was released 2012-10-04 under a CC BY-SA license. === Edward Snowden involvement === In May 2014, Wired reported that Edward Snowden, while employed by Dell as an NSA contractor, organized a local CryptoParty at a small hackerspace in Honolulu, Hawaii on December 11, six months before becoming well known for leaking tens of thousands of secret U.S. government documents. During the CryptoParty, Snowden taught 20 Hawaii residents how to encrypt their hard drives and use the Internet anonymously. The event was filmed by Snowden's then-girlfriend, but the video has never been released online. In a follow-up post to the CryptoParty wiki, Snowden pronounced the event a "huge success." == Media response == In 2013, CryptoParty received messages of support from the Electronic Frontier Foundation and (purportedly) AnonyOps, as well as the NSA whistleblower Thomas Drake, WikiLeaks central editor Heather Marsh, and Wired reporter Quinn Norton. Eric Hughes, the author of A Cypherpunk's Manifesto nearly two decades before, delivered the keynote address, Putting the Personal Back in Personal Computers, at the Amsterdam CryptoParty on 2012-09-27. Marcin de Kaminski, founding member of Piratbyrån which in turn founded The Pirate Bay, regarded CryptoParty as the most important civic project in cryptography in 2012, and Cory Doctorow has characterized a CryptoParty as being "like a Tupperware party for learning crypto." Der Spiegel in December 2014 mentioned "crypto parties" in the wake of the Edward Snowden leaks in an article about the NSA.

  Read more →
• 

  Public Services Network

  The Public Services Network (PSN) is a UK government's high-performance network, which helps public sector organisations work together, reduce duplication and share resources. It unified the provision of network infrastructure across the United Kingdom public sector into an interconnected "network of networks" to increase efficiency and reduce overall public expenditure. It is now a legacy network and public sector organisations are being migrated to using services on the public internet. == Origins == The Public Services Network (PSN) was launched officially as part of the Transformational Government Strategy commencing in 2005, under the original name of the Public Sector Network. Prior to this, some parts of local government had already successfully implemented the concept. The Hampshire Public Services Network (HPSN) was the first PSN, launched in 1999, followed closely by Kent County Councils partnerships with the KPSN. The HPSN, encompassing all of the borough, district and unitary councils, with the County Council, as well as the Fire Services, the Isle of Wight Council and 540 schools. National PSN technical and architecture compliance criteria were established from 2007, by GDS working with local government leaders from Socitm (the Society of Information Technology Management) on the National CIO Council and the Local CIO Council. The PSN's aim was to bring public services organisations with a common interest onto a single, coherent and standards-based ‘network of networks’. This would create influence, economies of scale and a commonality of standards for secure and easy inter-connection between public service organisations. The original concept of a network of networks strategy was based upon the work already undertaken in local government and recognition of Communities of Interest (COI) within the Criminal Justice Sector during work by the Office for Criminal Justice Reform (OCJR) between 2005 and 2007 to enable data sharing across business units. In this context a COI was defined as groups of Government departments and external partners who in combination provided services within a specific area of operation and used the same data, with a similar risk profile, shared risk appetite and common governance framework. Historically each group member had implemented their own networks and standards of operation in isolation with little or no consideration as to how services and data may be shared and resulting in increased costs of operation. The Network of Networks strategy proposed within OCJR recommended the creation of specific networks based upon these Communities of Interest which were joined together through data interchange gateways supporting common standards. Under this approach networks would be arranged by data type and business functions such as Criminal Justice, Health and Social Care, Defence and Intelligence or Public Finance rather than solely on established departmental boundaries. Within a COI, trust relationships and data interchange are readily supported, enabling data sharing without a need to cross network boundaries and providing benefits of scale without the challenges and compromises intrinsic to homogeneous cross sector networks. Data is made available without a need to transport it between organisations and control is retained by the data originator. In early 2007 a group of UK Government department CTOs in conjunction with the Office for Government Commerce Buying Solutions (OGC BS) established the vision for a single commonly provided, procured and managed public sector voice and data network infrastructure to replace the multitude of separately procured and managed networks serving various segments of the UK public sector; Education, Health, Central Government, Local Government etc. In 2008 an Industry Working Group was established to document the objectives and requirements more clearly. Their report set out the architectural and commercial principles as well as anticipated security, service management, governance and transition arrangements. == Architecture == The PSN comprises a core network, the Government Conveyancing Network or GCN provided by GCN Service Providers or GCNSPs. The GCN interconnects multiple operator networks, termed Direct Network Service Providers or DNSPs. Subscriber organisations contract to a connection from a local participating DNSP, connect via that to GCN and hence onwards to other interconnected networks and services. The GCN network is entirely based on IPv4 and MPLS and the GCNSPs are not currently mandated to provide IPv6, though they should have a roadmap to implementing it if and when required. == Commercial framework == In 2010 Virgin Media Business, BT, Cable & Wireless and Global Crossing signed Deeds of Undertaking (DoU) and subsequently achieved accreditation for providing GCN and IP VPN services. In March 2012, BT, Cable & Wireless, Capita Business Services, Eircom, Fujitsu, Kcom, Level 3, Logicalis, MDNX, Thales, Updata and Virgin Media Business were successful bidders for the initial two-year PSN Connectivity framework. In June 2012, 29 companies were confirmed as suppliers of ICT services to the UK public sector under the Government's PSN Services framework contract. Apart from most of the previous suppliers, additional companies also included 2e2, Airwave Solutions, Azzurri Communications, Cassidian, CSC Computer Sciences, Computacenter, Daisy Communications, Easynet Global Services, EE, Freedom Communications, Icom Holdings, NextiraOne, PageOne Communications, Phoenix IT Group, Siemens Communications, Specialist Computer Centres, Telefónica, telent Technology Services, Uniworld Communications and Vodafone. == Governance == The PSN is managed within the Cabinet Office where it is part of the Government Digital Service. == Early implementations == There were already notable initiatives in progress in county council areas, demonstrating public sector network integration in both the Hampshire HPSN2 network and in Kent's community network. Project Pathway was established as a pilot linking these two county-wide networks, with Virgin Media Business and Global Crossing the subscriber and GCN network elements. Staffordshire County Council was the first council in England to establish a PSN that included the county's NHS Health partners. Other county councils have since followed the leads of these councils. == Transition == Centrally procured public sector networks are expected to migrate across to the PSN framework as they reach the end of their contract terms, either through an interim framework or directly. The Government Secure Intranet (GSi) contracts expired in September 2011, running on to 12 February 2012 and were replaced by the transitional Government Secure Intranet Convergence Framework (GCF). The Managed Telephony Service (MTS) contract expired on 31 December 2011 and was replaced by the Managed Telephony Convergence Framework (MTCF). == Future plan == In a blog post published on 20 January 2017, Government Digital Service announced that the Technology Leaders Network (TLN) had agreed that government was starting a journey away from the PSN. This was because using the Internet was considered suitable for the vast majority of the work that the public sector does. The blog post confirmed that the 'move was not going to happen immediately' and stated that 'there's quite a bit of work to do across the public sector to prepare for the changes'. It also stated that it was too early for a full timeline to be provided, although all PSN-connected organisations would be updated as the process evolved. The blog post confirmed that organisations that need to access services that are only available on the PSN would still need to connect to it for the time being and continue to meet its assurance requirements. In a blog post published on 16 March 2017, Government Digital Service (GDS) set out its plans for PSN assurance. The blog post confirmed that the PSN compliance process wasn't 'going anywhere, certainly for a while yet'. It explained that the TLN agreed that – as one of the only recognised, externally accredited, cross-government common assurance standards – it 'needs to live on far beyond the end of the physical PSN network'. Government Digital Service, along with the National Cyber Security Centre (NCSC) and the Cyber and Government Security Directorate, are now looking at ways to expand and reframe PSN compliance in a new context that, while retaining the assurance principles that are the basis of the existing process, will aim to improve the process. A GDS blog post titled 'The road to closing down the PSN' published on 8 September 2020 describes how the public sector will migrate away from the PSN. The Cabinet Office has set up a programme called Future Networks for Government (FN4G) to help organisations move away from the PSN.

  Read more →
• 

  Fragment (computer graphics)

  In computer graphics, a fragment is the data necessary to generate a single pixel's worth of a drawing primitive in the frame buffer. These data may include, but are not limited to: raster position depth interpolated attributes (color, texture coordinates, etc.) stencil alpha window ID As a scene is drawn, drawing primitives (the basic elements of graphics output, such as points, lines, circles, text etc.) are rasterized into fragments which are textured and combined with the existing frame buffer. How a fragment is combined with the data already in the frame buffer depends on various settings. In a typical case, a fragment may be discarded if it is further away than the pixel which is already at that location (according to the depth buffer). If it is nearer than the existing pixel, it may replace what is already there, or, if alpha blending is in use, the pixel's color may be replaced with a mixture of the fragment's color and the pixel's existing color, as in the case of drawing a translucent object. In general, a fragment can be thought of as the data needed to shade the pixel, plus the data needed to test whether the fragment survives to become a pixel (depth, alpha, stencil, scissor, window ID, etc.). Shading a fragment is done through a fragment shader (or pixel shaders in Direct3D). In computer graphics, a fragment is not necessarily opaque, and could contain an alpha value specifying its degree of transparency. The alpha is typically normalized to the range of [0, 1], with 0 denotes totally transparent and 1 denotes totally opaque. If the fragment is not totally opaque, then part of its background object could show through, which is known as alpha blending.

  Read more →
• 

  Dashboard (computing)

  In computer information systems, a dashboard is a type of graphical user interface which often provides at-a-glance views of data relevant to a particular objective or process through a combination of visualizations and summary information. In other usage, "dashboard" is another name for "progress report" or "report" and is considered a form of data visualization. The dashboard is often accessible by a web browser and is typically linked to regularly updating data sources. Dashboards are often interactive and facilitate users to explore the data themselves, usually by clicking into elements to view more detailed information. The term dashboard originates from the automobile dashboard where drivers monitor the major functions at a glance via the instrument panel. == History == The idea of digital dashboards followed the study of decision support systems in the 1970s. Early predecessors of the modern business dashboard were first developed in the 1980s in the form of Executive Information Systems (EISs). Due to problems primarily with data refreshing and handling, it was soon realized that the approach wasn't practical as information was often incomplete, unreliable, and spread across too many disparate sources. Thus, EISs hibernated until the 1990s when the information age quickened pace and data warehousing, and online analytical processing (OLAP) allowed dashboards to function adequately. Despite the availability of enabling technologies, the dashboard use didn't become popular until later in that decade, with the rise of key performance indicators (KPIs), and the introduction of Robert S. Kaplan and David P. Norton's balanced scorecard. In the late 1990s, Microsoft promoted a concept known as the Digital Nervous System and "digital dashboards" were described as being one leg of that concept. Today, the use of dashboards forms an important part of Business Performance Management (BPM). Initially dashboards were used for monitoring purposes, now with the advancement of technology, dashboards are being used for more analytical purposes. The use of dashboards has now been incorporating; scenario analysis, drill down capabilities, and presentation format flexibility. == Benefits == Digital dashboards allow managers to monitor the contribution of the various departments in their organization. In addition, they enable “rolling up” of information to present a consolidated view across an organization. To gauge exactly how well an organization is performing overall, digital dashboards allow you to capture and report specific data points from each department within the organization, thus providing a "snapshot" of performance. Benefits of using digital dashboards include: Visual presentation of performance measures Ability to identify and correct negative trends Measure efficiencies/inefficiencies Ability to generate detailed reports showing new trends Ability to make more informed decisions based on collected business intelligence Dashboards offers a holistic view of the entire business as it gives the manager a bird's eye view into the performance of sales, data inventory, web traffic, social media analytics and other associated data that is visually presented on a single dashboard. Dashboards lead to better management of marketing/financial strategies as a dashboard for the display of marketing data makes the process of marketing easier and more reliable as compared to doing it manually. Web analytics play a crucial role in shaping the marketing strategy of many businesses. Dashboards also facilitate for better tracking of sales and financial reporting as the data is more precise and in one area. Lastly, dashboards offer for better customer service through monitoring because they keep both the managers and the clients updated on the project progress through automated emails and notifications. == Align strategies and organizational goals == Gain total visibility of all systems instantly Quick identification of data outliers and correlations Consolidated reporting into one location Available on mobile devices to quickly access metrics == Classification == Dashboards can be broken down according to role and are either strategic, analytical, operational, or informational. Dashboards are the 3rd step on the information ladder, demonstrating the conversion of data to increasingly valuable insights. Strategic dashboards support managers at any level in an organization and provide the quick overview that decision-makers need to monitor the health and opportunities of the business. Dashboards of this type focus on high-level measures of performance and forecasts. Strategic dashboards benefit from static snapshots of data (daily, weekly, monthly, and quarterly) that are not constantly changing from one moment to the next. Dashboards for analytical purposes often include more context, comparisons, and history, along with subtler performance evaluators. In addition, analytical dashboards typically support interactions with the data, such as drilling down into the underlying details. Dashboards for monitoring operations are often designed differently from those that support strategic decision making or data analysis and often require monitoring of activities and events that are constantly changing and might require attention and response at a moment's notice. == Types of dashboards == Digital dashboards may be laid out to track the flows inherent in the business processes that they monitor. Graphically, users may see the high-level processes and then drill down into low-level data. This level of detail is often buried deep within the corporate enterprise and otherwise unavailable to the senior executives. Three main types of digital dashboards dominate the market today: desktop software applications, web-browser-based applications, and desktop applications are also known as desktop widgets. The last are driven by a widget engine. Both Desktop and Browser-based providers enable the distribution of dashboards via a web browser. An example of the latter is web-based-browser Asana, which helps teams orchestrate their work, from daily tasks to strategic cross-functional initiatives. With it, teams can manage everything from company objectives to digital transformation to product launches and marketing campaigns. Specialized dashboards may track all corporate functions. Examples include human resources, recruiting, sales, operations, security, information technology, project management, customer relationship management, digital marketing and many more departmental dashboards. For a smaller organization like a startup a compact startup scorecard dashboard tracks important activities across lot of domains ranging from social media to sales. Digital dashboard projects involve business units as the driver and the information technology department as the enabler. Therefore, the success of dashboard projects depends on the relevancy/importance of information provided within the dashboard. This includes the metrics chosen to monitor and the timeliness of the data forming those metrics; data must be up to date and accurate. Key performance indicators, balanced scorecards, and sales performance figures are some of the content appropriate on business dashboards. === Performance Dashboards === Dashboards involve the combination of visual and functional features. This combination of features helps improve cognition and interpretation. A performance dashboard sits at the intersection of two powerful disciplines: business intelligence and performance management. Therefore, there are different users who could use these dashboards for different reasons. For example, a level of workers could look at monitoring inventory while those in more managerial roles can look at lagging measure. Then executives could utilize the dashboard to evaluate strategic performance against objectives. == Dashboards and scorecards == Balanced scorecards and dashboards have been linked together as if they were interchangeable. However, although both visually display critical information, the difference is in the format: Scorecards can open the quality of an operation while dashboards provide calculated direction. A balanced scorecard has what they called a "prescriptive" format. It should always contain these components: Perspectives – group Objectives – verb-noun phrases pulled from a strategy plan Measures – also called metric or key performance indicators (KPIs) Spotlight indicators – red, yellow, or green symbols that provide an at-a-glance view of a measure's performance. Each of these sections ensures that a Balanced Scorecard is essentially connected to the businesses critical strategic needs. The design of a dashboard is more loosely defined. Dashboards are usually a series of graphics, charts, gauges and other visual indicators that can be monitored and interpreted. Even when there is a strategic link, on a dashboard, it may not be noticed as such since objectives are not normally pre

  Read more →
• 

  Hyper-encryption

  Hyper-encryption is a form of encryption invented by Michael O. Rabin which uses a high-bandwidth source of public random bits, together with a secret key that is shared by only the sender and recipient(s) of the message. It uses the assumptions of Ueli Maurer's bounded-storage model as the basis of its secrecy. Although everyone can see the data, decryption by adversaries without the secret key is still not feasible, because of the space limitations of storing enough data to mount an attack against the system. Unlike almost all other cryptosystems except the one-time pad, hyper-encryption can be proved to be information-theoretically secure, provided the storage bound cannot be surpassed. Moreover, if the necessary public information cannot be stored at the time of transmission, the plaintext can be shown to be impossible to recover, regardless of the computational capacity available to an adversary in the future, even if they have access to the secret key at that future time. A highly energy-efficient implementation of a hyper-encryption chip was demonstrated by Krishna Palem et al. using the Probabilistic CMOS or PCMOS technology and was shown to be ~205 times more efficient in terms of Energy-Performance-Product.

  Read more →
• 

  Content management

  Content management (CM) are a set of processes and technologies that support the collection, managing, and publishing of information in any form or medium. When stored and accessed via computers, this information may be more specifically referred to as digital content, or simply as content. Digital content may take the form of text (such as electronic documents), images, multimedia files (such as audio or video files), or any other file type that follows a content lifecycle requiring management. The process of content development and management is complex enough that various commercial software vendors (large and small), such as Interwoven and Microsoft, offer content management software to control and automate significant aspects of the content lifecycle. == Process == Content management practices and goals vary by mission and by organizational governance structure. News organizations, e-commerce websites, and educational institutions all use content management, but in different ways. This leads to differences in terminology and in the names and number of steps in the process. For example, some digital content is created by one or more authors. Over time that content may be edited. One or more individuals may provide some editorial oversight, approving the content for publication. Publishing may take many forms: it may be the act of "pushing" content out to others, or simply granting digital access rights to certain content to one or more individuals. Later that content may be superseded by another version of the content and thus retired or removed from use (as when this wiki page is modified). Content management is an inherently collaborative process. It often consists of the following basic roles and responsibilities: Creator – responsible for creating and editing content. Editor – responsible for tuning the content message and the style of delivery, including translation and localization. Publisher – responsible for releasing the content for use. Administrator – responsible for managing access permissions to folders, collections and files, usually accomplished by assigning access rights to user groups or roles. Admins may also assist and support users in various ways. Consumer, viewer or guest – the person who reads or otherwise consumes the content after it is published or shared. A critical aspect of content management is the ability to manage versions of content as it evolves (see also version control). Authors and editors often need to restore older versions of edited products due to a process failure or an undesirable series of edits. Time-sensitive content may also require updates as the subject matter evolves over time. Another equally important aspect of content management involves the creation, maintenance, and application of review standards. Each member of the content creation and review process has a unique role and set of responsibilities in the development or publication of the content. Each review team member requires clear and concise review standards. These must be maintained on an ongoing basis to ensure the long-term consistency and health of the knowledge base. A content management system is a set of automated processes that may support the following features: Import and creation of documents and multimedia material Identification of all key users and their roles The ability to assign roles and responsibilities to different instances of content categories or types Definition of workflow tasks often coupled with messaging so that content managers are alerted to changes in content The ability to track and manage multiple versions of a single instance of content The ability to publish the content to a repository to support access The ability to personalize content based on a set of rules Increasingly, the repository is an inherent part of the system, and incorporates enterprise search and retrieval. Content management systems take the following forms: Web content management system—software for web site management (often what content management implicitly means) Output of a newspaper editorial staff organization Workflow for article publication Document management systems Knowledge management software Single source content management system—content stored in chunks within a relational database Variant management system—where personnel tag source content (usually text and graphics) to represent variants stored as single source "master" content modules, resolved to the desired variant at publication (for example: automobile owners manual content for 12 model years stored as single master content files and "called" by model year as needed)—often used in concert with database chunk storage (see above) for large content objects == Governance structures == Content management expert Marc Feldman defines three primary content management governance structures: localized, centralized, and federated—each having its unique strengths and weaknesses. === Localized governance === By putting control in the hands of those closest to the content, the context experts, localized governance models empower and unleash creativity. These benefits come, however, at the cost of a partial-to-total loss of managerial control and oversight. === Centralized governance === When the levers of control are strongly centralized, content management systems are capable of delivering an exceptionally clear and unified brand message. Moreover, centralized content management governance structures allow for a large number of cost-savings opportunities in large enterprises, realized, for example, through (1) the avoidance of duplicated efforts in creating, editing, formatting, repurposing and archiving content; (2) process management and the streamlining of all content related labor; and/or (3) an orderly deployment or updating of the content management system. === Federated governance === Federated governance models potentially realize the benefits of both localized and centralized control while avoiding the weaknesses of both. While content management software systems are inherently structured to enable federated governance models, realizing these benefits can be difficult because it requires, for example, negotiating the boundaries of control with local managers and content creators. In the case of larger enterprises, in particular, the failure to fully implement or realize a federated governance structure equates to a failure to realize the full return on investment and cost savings that content management systems enable. == Implementation == Content management implementations must be able to manage content distributions and digital rights in content life cycle. Content management systems are usually involved with digital rights management in order to control user access and digital rights. In this step, the read-only structures of digital rights management systems force some limitations on content management, as they do not allow authors to change protected content in their life cycle. Creating new content using managed (protected) content is also an issue that gets protected contents out of management controlling systems. A few content management implementations cover all these issues.

  Read more →
• 

  Hekaton (database)

  Hekaton (also known as SQL Server In-Memory OLTP) is an in-memory database for OLTP workloads built into Microsoft SQL Server. Hekaton was designed in collaboration with Microsoft Research and was released in SQL Server 2014. Traditional RDBMS systems were designed when memory resources were expensive, and were optimized for disk storage. Hekaton is instead optimized for a working set stored entirely in main memory, but is still accessible via T-SQL like normal tables. It is fundamentally different from the "DBCC PINTABLE" feature in earlier SQL Server versions. Hekaton was announced at the Professional Association for SQL Server (PASS) conference 2012.

  Read more →
• 

  Majal (organization)

  Majal is a regional not-for-profit organization focused on "amplifying voices of dissent" throughout the Middle East and North Africa via digital media. Founded in Bahrain, the organization "creates platforms and web applications that promote freedom of expression and social justice." Majal, which relies on open source platforms, like WordPress and Ruby on Rails, was launched in 2006 by Esra'a Al Shafei as a simple group-blogging idea. However, it has changed course to focus on the development of unique applications and tools. == Objectives and means == Majal's content, in addition to its projects and applications, is free open source content to ensure right to access information for everyone. The organization uses a broad spectrum of social media tools, ranging from written blogs, podcasts, vlogs, comics, video animation and pictures to live broadcasting through radio. == Projects and applications == Majal runs various active projects that include Alliance for Kurdish Rights, The Muslim Network for Baháʼí Rights, a discussion tool for Arab LGBT youth and various Mobile apps. == Funding == Majal is funded through private donations and grants from non-governmental organizations, as well as any potential revenues earned through freelance development. Its primary funders are the Shuttleworth Foundation and the Omidyar Network. In 2008, Majal won the Berkman Award from the Berkman Klein Center for Internet & Society at Harvard University in the Human Rights/Global Advocacy category. This $10,000 award was Majal’s first source of funding. This award is presented to “people or institutions that have made a significant contribution to the Internet and its impact on society over the past decade.” In 2009, the March 18 Movement, a project of Majal, received the Think Social Award, which demonstrates how social media can be used to solve the world’s problems. Esra'a Al-Shafei was named a 2009 Echoing Green Fellow for Civil and Human Rights, a seed funding award for young entrepreneurs engaged in social change. Financially, the fellowship consists of a $60,000 stipend paid over two years. Most recently, MEY has received a grant from the Arab Fund for Arts and Culture for its Mideast Tunes website. == Awards == Winner of Human Rights Tulip 2014 Human Rights Tulip - Human rights - Government.nl Ashoka Changemakers Citizen Media competition in 2011 for their CrowdVoice project. Monaco Media Prize 2011 for Majal founder and director Esra'a Al Shafei in 2011. The BOBS Special Topic Human Rights award in 2011 for the Majal website Migrant Rights. ThinkSocial Award in 2009, as powerful model for how social media can be used to address global problems. Echoing Green, 2009 Fellowship. TEDGlobal 2009 Fellowship. Berkman Award for Internet Innovation from Berkman Klein Center for Internet & Society at Harvard Law School in 2008 for the outstanding contributions to the internet and its impact on society. The Global Journal selected Majal as one of the Top 100 NGOs in 2013. 2013-2014 Shuttleworth Foundation Fellowship. == Leadership == Majal team is led primarily by women. The organization was founded by Esra'a Al Shafei, a blogger from Bahrain in 2006. Ahmed Zidan of Egypt has served for over three years as the Editor-in-Chief of Majal Arabic, and is the co-founder of Ahwaa, and is also a podcaster. Other team members include Mona Kareem, Rima Kalush, Abir Ghattas, Namita Malhotra, and Vani Saraswathi. == 2011 Middle East and North Africa protests == Blogs and video played a role in the documentation of protests throughout the Middle East and North Africa during 2010-2011, also known as the Arab Spring. During this period, MEY's project, CrowdVoice (launched in 2010) helped curate and archive the large amounts of videos, images, and eye-witness reports being aggregated and crowdsourced from across the region. As a result, it had been censored temporarily in Yemen and is still censored in Bahrain. == Media coverage == Majal claims to have received various coverage from news agencies, TV satellite channels, radio stations, newspapers, magazines. For instance, Sky News, CNN, New York Times, BBC, The Guardian, NPR, Time, MTV political blog "Act", VH1, Daily Telegraph, Die Zeit, Frankfurter Rundschau FR-online, Toronto Star, TechCrunch, Rolling Stone Middle East, Abu Dhabi TV, Gulf News, Al-Hasnaa' magazine, ReadWriteWeb, Mashable, The Next Web, Radio Sawt Beirut International, Radio Farda among many others.

  Read more →
• 

  Computer-aided software engineering

  Computer-aided software engineering (CASE) is a domain of software tools used to design and implement applications. CASE tools are similar to and are partly inspired by computer-aided design (CAD) tools used for designing hardware products. CASE tools are intended to help develop high-quality, defect-free, and maintainable software. CASE software was often associated with methods for the development of information systems together with automated tools that could be used in the software development process. == History == The Information System Design and Optimization System (ISDOS) project, started in 1968 at the University of Michigan, initiated a great deal of interest in the whole concept of using computer systems to help analysts in the very difficult process of analysing requirements and developing systems. Several papers by Daniel Teichroew fired a whole generation of enthusiasts with the potential of automated systems development. His Problem Statement Language / Problem Statement Analyzer (PSL/PSA) tool was a CASE tool although it predated the term. Another major thread emerged as a logical extension to the data dictionary of a database. By extending the range of metadata held, the attributes of an application could be held within a dictionary and used at runtime. This "active dictionary" became the precursor to the more modern model-driven engineering capability. However, the active dictionary did not provide a graphical representation of any of the metadata. It was the linking of the concept of a dictionary holding analysts' metadata, as derived from the use of an integrated set of techniques, together with the graphical representation of such data that gave rise to the earlier versions of CASE. The next entrant into the market was Excelerator from Index Technology in Cambridge, Mass. While DesignAid ran on Convergent Technologies and later Burroughs Ngen networked microcomputers, Index launched Excelerator on the IBM PC/AT platform. While, at the time of launch, and for several years, the IBM platform did not support networking or a centralized database as did the Convergent Technologies or Burroughs machines, the allure of IBM was strong, and Excelerator came to prominence. Hot on the heels of Excelerator were a rash of offerings from companies such as Knowledgeware (James Martin, Fran Tarkenton and Don Addington), Texas Instrument's CA Gen and Andersen Consulting's FOUNDATION toolset (DESIGN/1, INSTALL/1, FCP). CASE tools were at their peak in the early 1990s. According to the PC Magazine of January 1990, over 100 companies were offering nearly 200 different CASE tools. At the time IBM had proposed AD/Cycle, which was an alliance of software vendors centered on IBM's Software repository using IBM DB2 in mainframe and OS/2: The application development tools can be from several sources: from IBM, from vendors, and from the customers themselves. IBM has entered into relationships with Bachman Information Systems, Index Technology Corporation, and Knowledgeware wherein selected products from these vendors will be marketed through an IBM complementary marketing program to provide offerings that will help to achieve complete life-cycle coverage. With the decline of the mainframe, AD/Cycle and the Big CASE tools died off, opening the market for the mainstream CASE tools of today. Many of the leaders of the CASE market of the early 1990s ended up being purchased by Computer Associates, including IEW, IEF, ADW, Cayenne, and Learmonth & Burchett Management Systems (LBMS). The other trend that led to the evolution of CASE tools was the rise of object-oriented methods and tools. Most of the various tool vendors added some support for object-oriented methods and tools. In addition new products arose that were designed from the bottom up to support the object-oriented approach. Andersen developed its project Eagle as an alternative to Foundation. Several of the thought leaders in object-oriented development each developed their own methodology and CASE tool set: Jacobson, Rumbaugh, Booch, etc. Eventually, these diverse tool sets and methods were consolidated via standards led by the Object Management Group (OMG). The OMG's Unified Modelling Language (UML) is currently widely accepted as the industry standard for object-oriented modeling. == CASE software == === Tools === CASE tools support specific tasks in the software development life-cycle. They can be divided into the following categories: Business and analysis modeling: Graphical modeling tools. E.g., E/R modeling, object modeling, etc. Development: Design and construction phases of the life-cycle. Debugging environments. E.g., IISE LKO. Verification and validation: Analyze code and specifications for correctness, performance, etc. Configuration management: Control the check-in and check-out of repository objects and files. E.g., SCCS, IISE. Metrics and measurement: Analyze code for complexity, modularity (e.g., no "go to's"), performance, etc. Project management: Manage project plans, task assignments, scheduling. Another common way to distinguish CASE tools is the distinction between Upper CASE and Lower CASE. Upper CASE Tools support business and analysis modeling. They support traditional diagrammatic languages such as ER diagrams, Data flow diagram, Structure charts, Decision Trees, Decision tables, etc. Lower CASE Tools support development activities, such as physical design, debugging, construction, testing, component integration, maintenance, and reverse engineering. All other activities span the entire life-cycle and apply equally to upper and lower CASE. === Workbenches === Workbenches integrate two or more CASE tools and support specific software-process activities. Hence they achieve: A homogeneous and consistent interface (presentation integration) Seamless integration of tools and toolchains (control and data integration) An example workbench is Microsoft's Visual Basic programming environment. It incorporates several development tools: a GUI builder, a smart code editor, debugger, etc. Most commercial CASE products tended to be such workbenches that seamlessly integrated two or more tools. Workbenches also can be classified in the same manner as tools; as focusing on Analysis, Development, Verification, etc. as well as being focused on the upper case, lower case, or processes such as configuration management that span the complete life-cycle. === Environments === An environment is a collection of CASE tools or workbenches that attempts to support the complete software process. This contrasts with tools that focus on one specific task or a specific part of the life-cycle. CASE environments are classified by Fuggetta as follows: Toolkits: Loosely coupled collections of tools. These typically build on operating system workbenches such as the Unix Programmer's Workbench or the VMS VAX set. They typically perform integration via piping or some other basic mechanism to share data and pass control. The strength of easy integration is also one of the drawbacks. Simple passing of parameters via technologies such as shell scripting can't provide the kind of sophisticated integration that a common repository database can. Fourth generation: These environments are also known as 4GL standing for fourth generation language environments due to the fact that the early environments were designed around specific languages such as Visual Basic. They were the first environments to provide deep integration of multiple tools. Typically these environments were focused on specific types of applications. For example, user-interface driven applications that did standard atomic transactions to a relational database. Examples are Informix 4GL, and Focus. Language-centered: Environments based on a single often object-oriented language such as the Symbolics Lisp Genera environment or VisualWorks Smalltalk from Parcplace. In these environments all the operating system resources were objects in the object-oriented language. This provides powerful debugging and graphical opportunities but the code developed is mostly limited to the specific language. For this reason, these environments were mostly a niche within CASE. Their use was mostly for prototyping and R&D projects. A common core idea for these environments was the model–view–controller user interface that facilitated keeping multiple presentations of the same design consistent with the underlying model. The MVC architecture was adopted by the other types of CASE environments as well as many of the applications that were built with them. Integrated: These environments are an example of what most IT people tend to think of first when they think of CASE. Environments such as IBM's AD/Cycle, Andersen Consulting's FOUNDATION, the ICL CADES system, and DEC Cohesion. These environments attempt to cover the complete life-cycle from analysis to maintenance and provide an integrated database repository for storing all artifacts of the software pr

  Read more →
• 

  Superincreasing sequence

  In mathematics, a sequence of positive real numbers ( s 1 , s 2 , . . . ) {\displaystyle (s_{1},s_{2},...)} is called superincreasing if every element of the sequence is greater than the sum of all previous elements in the sequence. Formally, this condition can be written as s n + 1 > ∑ j = 1 n s j {\displaystyle s_{n+1}>\sum _{j=1}^{n}s_{j}} for all n ≥ 1. == Program == The following Python source code tests a sequence of numbers to determine if it is superincreasing: This produces the following output: Sum: 0 Element: 1 Sum: 1 Element: 3 Sum: 4 Element: 6 Sum: 10 Element: 13 Sum: 23 Element: 27 Sum: 50 Element: 52 Is it a superincreasing sequence? True == Examples == (1, 3, 6, 13, 27, 52) is a superincreasing sequence, but (1, 3, 4, 9, 15, 25) is not. The series a^x for a>=2 == Properties == Multiplying a superincreasing sequence by a positive real constant keeps it superincreasing.

  Read more →
• 

  Semantic analysis (machine learning)

  In machine learning, semantic analysis of a text corpus is the task of building structures that approximate concepts from a large set of documents. It generally does not involve prior semantic understanding of the documents. Semantic analysis strategies include: Metalanguages based on first-order logic, which can analyze the speech of humans. Understanding the semantics of a text is symbol grounding: if language is grounded, it is equal to recognizing a machine-readable meaning. For the restricted domain of spatial analysis, a computer-based language understanding system was demonstrated. Latent semantic analysis (LSA), a class of techniques where documents are represented as vectors in a term space. A prominent example is probabilistic latent semantic analysis (PLSA). Latent Dirichlet allocation, which involves attributing document terms to topics. n-grams and hidden Markov models, which work by representing the term stream as a Markov chain, in which each term is derived from preceding terms. == Stochastic semantic analysis ==

  Read more →
• 

  Ciphertext

  In cryptography, ciphertext or cyphertext is the result of encryption performed on plaintext using an algorithm, called a cipher. Ciphertext is also known as encrypted or encoded information because it contains a form of the original plaintext that is unreadable by a human or computer without the proper cipher to decrypt it. This process prevents the loss of sensitive information via hacking. Decryption, the inverse of encryption, is the process of turning ciphertext into readable plaintext. Ciphertext is not to be confused with codetext, because the latter is a result of a code, not a cipher. == Conceptual underpinnings == Let m {\displaystyle m\!} be the plaintext message that Alice wants to secretly transmit to Bob and let E k {\displaystyle E_{k}\!} be the encryption cipher, where k {\displaystyle _{k}\!} is a cryptographic key. Alice must first transform the plaintext into ciphertext, c {\displaystyle c\!} , in order to securely send the message to Bob, as follows: c = E k ( m ) . {\displaystyle c=E_{k}(m).\!} In a symmetric-key system, Bob knows Alice's encryption key. Once the message is encrypted, Alice can safely transmit it to Bob (assuming no one else knows the key). In order to read Alice's message, Bob must decrypt the ciphertext using E k − 1 {\displaystyle {E_{k}}^{-1}\!} which is known as the decryption cipher, D k : {\displaystyle D_{k}:\!} D k ( c ) = D k ( E k ( m ) ) = m . {\displaystyle D_{k}(c)=D_{k}(E_{k}(m))=m.\!} Alternatively, in a non-symmetric key system, everyone, not just Alice and Bob, knows the encryption key; but the decryption key cannot be inferred from the encryption key. Only Bob knows the decryption key D k , {\displaystyle D_{k},} and decryption proceeds as D k ( c ) = m . {\displaystyle D_{k}(c)=m.} == Types of ciphers == The history of cryptography began thousands of years ago. Cryptography uses a variety of different types of encryption. Earlier algorithms were performed by hand and are substantially different from modern algorithms, which are generally executed by a machine. === Historical ciphers === Historical pen and paper ciphers used in the past are sometimes known as classical ciphers. They include: Substitution cipher: the units of plaintext are replaced with ciphertext (e.g., Caesar cipher and one-time pad) Polyalphabetic substitution cipher: a substitution cipher using multiple substitution alphabets (e.g., Vigenère cipher and Enigma machine) Polygraphic substitution cipher: the unit of substitution is a sequence of two or more letters rather than just one (e.g., Playfair cipher) Transposition cipher: the ciphertext is a permutation of the plaintext (e.g., rail fence cipher) Historical ciphers are not generally used as a standalone encryption technique because they are quite easy to crack. Many of the classical ciphers, with the exception of the one-time pad, can be cracked using brute force. === Modern ciphers === Modern ciphers are more secure than classical ciphers and are designed to withstand a wide range of attacks. An attacker should not be able to find the key used in a modern cipher, even if they know any specifics about the plaintext and its corresponding ciphertext. Modern encryption methods can be divided into the following categories: Private-key cryptography (symmetric key algorithm): one shared key is used for encryption and decryption Public-key cryptography (asymmetric key algorithm): two different keys are used for encryption and decryption In a symmetric key algorithm (e.g., DES, AES), the sender and receiver have a shared key established in advance: the sender uses the shared key to perform encryption; the receiver uses the shared key to perform decryption. Symmetric key algorithms can either be block ciphers or stream ciphers. Block ciphers operate on fixed-length groups of bits, called blocks, with an unvarying transformation. Stream ciphers encrypt plaintext digits one at a time on a continuous stream of data, with the transformation of successive digits varying during the encryption process. In an asymmetric key algorithm (e.g., RSA), there are two different keys: a public key and a private key. The public key is published, thereby allowing any sender to perform encryption. The private key is kept secret by the receiver, thereby allowing only the receiver to correctly perform decryption. == Cryptanalysis == Cryptanalysis (also referred to as codebreaking or cracking the code) is the study of applying various methodologies to obtain the meaning of encrypted information, without having access to the cipher required to correctly decrypt the information. This typically involves gaining an understanding of the system design and determining the cipher. Cryptanalysts can follow one or more attack models to crack a cipher, depending upon what information is available and the type of cipher being analyzed. Ciphertext is generally the most easily obtained part of a cryptosystem and therefore is an important part of cryptanalysis. === Attack models === Ciphertext-only: the cryptanalyst has access only to a collection of ciphertexts or code texts. This is the weakest attack model because the cryptanalyst has limited information. Modern ciphers rarely fail under this attack. Known-plaintext: the attacker has a set of ciphertexts to which they know the corresponding plaintext Chosen-plaintext attack: the attacker can obtain the ciphertexts corresponding to an arbitrary set of plaintexts of their own choosing Batch chosen-plaintext attack: where the cryptanalyst chooses all plaintexts before any of them are encrypted. This is often the meaning of an unqualified use of "chosen-plaintext attack". Adaptive chosen-plaintext attack: where the cryptanalyst makes a series of interactive queries, choosing subsequent plaintexts based on the information from the previous encryptions. Chosen-ciphertext attack: the attacker can obtain the plaintexts corresponding to an arbitrary set of ciphertexts of their own choosing Adaptive chosen-ciphertext attack Indifferent chosen-ciphertext attack Related-key attack: similar to a chosen-plaintext attack, except the attacker can obtain ciphertexts encrypted under two different keys. The keys are unknown, but the relationship between them is known (e.g., two keys that differ in the one bit). == Famous ciphertexts == The Babington Plot ciphers The Shugborough inscription The Zimmermann Telegram The Magic Words are Squeamish Ossifrage The cryptogram in "The Gold-Bug" Beale ciphers Kryptos Zodiac Killer ciphers

  Read more →
• 

  Private message

  In computer networking, a private message (PM), or direct message (DM), refers to a private communication, often text-based, sent or received by a user of a private communication channel on any given platform. Unlike public posts, PMs are only viewable by the participants. Long a function present on IRCs and Internet forums, private channels for PMs have also been prevalent features on instant messaging (IM) and on social media networks. It may be either synchronous (e.g. on an IM) or asynchronous (e.g. on an Internet forum). The term private message (PM) originated as a feature on internet forums, while the term direct message (DM) originated as a feature on Twitter. Due to the popularity of the latter service, DM has since been appropriated by other platforms, such as Instagram, and is often genericized in popular usage. == Overview == There are two main types of private messages, and one obscure type: One type includes those found on IRCs and Internet forums, as well as on social media services like Twitter, Facebook, and Instagram, where the focus is public posting, PMs allow users to communicate privately without leaving the platform. The second type are those relayed through instant messaging platforms such as WhatsApp and Snapchat, where users join the networks primarily to exchange PMs. A third type, peer-to-peer messaging, occurs when users create and own the infrastructure used to transmit and store the messages; while features vary depending on application, they give the user full control over the data they transmit. An example of software that enables this kind of messaging is Classified-ads. Besides serving as a tool to connect privately with friends and family, PMs have gained momentum in the workplace. Working professionals use PMs to reach coworkers in other spaces and increase efficiency during meetings. Although useful, using PMs in the workplace may blur the boundary between work and private lives. Some common forms of private messaging today include Facebook messaging (sometimes referred to as "inboxing"), Twitter direct messaging, and Instagram direct messaging. These forms of private messaging provide a private space on a usually public site. For instance, most activity on Twitter is public, but Twitter DMs provide a private space for communication between two users. This differs from mediums like email, texting, and Snapchat, where most or all activity is always private. Modern forms of private messaging may include multimedia messages, such as pictures or videos. == History == Email was first developed to send messages between different computers on ARPANET in 1971. Access to ARPANET was primarily limited to universities and other research institutions. Starting in 1983 or 1984, FidoNet allowed home computer users to send and receive email via bulletin board systems. Information services such as CompuServe, America Online, and Prodigy also helped to popularizes online messaging. The advent of the public World Wide Web in 1993 increased access to email via internet service providers, and later via webmail. Instant messaging systems became popular in the mid 1990s, as Internet access improved and personal computers became more common. The introduction of Skype in 2003 popularized Internet-based voice and video messaging. Direct messaging is now a feature of all major social networking services. == Privacy concerns == In January 2014, Matthew Campbell and Michael Hurley filed a class-action lawsuit against Facebook for breaching the Electronic Communications Privacy Act. They alleged that private messages which contained URLs were being read and used to generate profit, through data mining and user profiling, and that it was misleading for Facebook to refer to the functionality as "private" with the implication that the communication was "free from surveillance". In 2012, some Facebook users misinterpreted a redesign of the Facebook wall as publicly sharing private messages from 2008–2009. These were found to be public wall posts from those years, made at a time when it was not possible to like or comment on a wall post, making the notes look like private messages.

  Read more →