AI Image Generators

Explore the best AI Image Generators — independent reviews, comparisons, pricing and step-by-step how-to guides, curated by Aizhi.

Computational photography

Computational photography refers to digital image capture and processing techniques that use digital computation instead of optical processes. Computational photography can improve the capabilities of a camera, or introduce features that were not possible at all with film-based photography, or reduce the cost or size of camera elements. Examples of computational photography include in-camera computation of digital panoramas, high-dynamic-range images, and light field cameras. Light field cameras use novel optical elements to capture three-dimensional scene information, which can then be used to produce 3D images, enhanced depth-of-field, and selective de-focusing (or "post focus"). Enhanced depth-of-field reduces the need for mechanical focusing systems. All of these features use computational imaging techniques. The definition of computational photography has evolved to cover a number of subject areas in computer graphics, computer vision, and applied optics. These areas are given below, organized according to a taxonomy proposed by Shree K. Nayar. Within each area is a list of techniques, and for each technique, one or two representative papers or books are cited. Deliberately omitted from the taxonomy are image processing (see also digital image processing) techniques applied to traditionally captured images to produce better images. Examples of such techniques are image scaling, dynamic range compression (i.e. tone mapping), color management, image completion (a.k.a. inpainting or hole filling), image compression, digital watermarking, and artistic image effects. Also omitted are techniques that produce range data, volume data, 3D models, 4D light fields, 4D, 6D, or 8D BRDFs, or other high-dimensional image-based representations. Epsilon photography is a sub-field of computational photography. == Effect on photography == Photos taken using computational photography can allow amateurs to produce photographs rivalling the quality of professional photographers, but as of 2019 do not outperform the use of professional-level equipment. == Computational illumination == This is controlling photographic illumination in a structured fashion, then processing the captured images, to create new images. The applications include image-based relighting, image enhancement, image deblurring, geometry/material recovery and so forth. High-dynamic-range imaging uses differently exposed pictures of the same scene to extend dynamic range. Other examples include processing and merging differently illuminated images of the same subject matter ("lightspace"). == Computational optics == This is a capture of optically coded images, followed by computational decoding to produce new images. Coded aperture imaging was mainly applied in astronomy and X-ray imaging to boost the image quality. Instead of a single pin-hole, a pinhole pattern is applied in imaging, and deconvolution is performed to recover the image. In coded exposure imaging, the on/off state of the shutter is coded to modify the kernel of motion blur. In this way, motion deblurring becomes a well-conditioned problem. Similarly, in a lens based coded aperture, the aperture can be modified by inserting a broadband mask. Thus, out of focus deblurring becomes a well-conditioned problem. The coded aperture can also improve the quality in light field acquisition using Hadamard transform optics. Coded aperture patterns can also be designed using color filters, in order to apply different codes at different wavelengths. This allows for increase the amount of light that reaches the camera sensor, compared to binary masks. == Computational imaging == Computational imaging is a set of imaging techniques that combine data acquisition and data processing to create the image of an object through indirect means to yield enhanced resolution, additional information such as optical phase or 3D reconstruction. The information is often recorded without using a conventional optical microscope configuration or with limited datasets. Computational imaging allows going beyond physical limitations of optical systems, such as numerical aperture, or even obliterates the need for optical elements. For parts of the optical spectrum where imaging elements such as objectives are difficult to manufacture or image sensors cannot be miniaturized, computational imaging provides useful alternatives, in fields such as X-ray and THz radiations. === Common techniques === Among common computational imaging techniques are lensless imaging, computational speckle imaging , ptychography and Fourier ptychography. Computational imaging technique often draws on compressive sensing or phase retrieval techniques, where the angular spectrum of the object is reconstructed. Other techniques are related to the field of computational imaging, such as digital holography, computer vision and inverse problems such as tomography. == Computational processing == This is the processing of non-optically-coded images to produce new images. == Computational sensors == These are detectors that combine sensing and processing, typically in hardware, like the oversampled binary image sensor. == Early work in computer vision == Although computational photography is a currently popular buzzword in computer graphics, many of its techniques first appeared in the computer vision literature, either under other names or within papers aimed at 3D shape analysis. == Art history == Computational photography, as an art form, has been practiced by capturing differently exposed pictures of the same subject matter and combining them. This was the inspiration for the development of the wearable computer in the 1970s and early 1980s. Computational photography was inspired by the work of Charles Wyckoff, and thus computational photography datasets (e.g. differently exposed pictures of the same subject matter that are taken in order to make a single composite image) are sometimes referred to as Wyckoff Sets, in his honor. Early work in this area (joint estimation of image projection and exposure value) was undertaken by Mann and Candoccia. Charles Wyckoff devoted much of his life to creating special kinds of 3-layer photographic films that captured different exposures of the same subject matter. A picture of a nuclear explosion, taken on Wyckoff's film, appeared on the cover of Life Magazine and showed the dynamic range from the dark outer areas to the inner core.
Read more →
Glow (app)

Glow is a fertility awareness and period-tracking app. It is part of a suite of mobile apps focused on women's reproductive health and childcare, which includes Eve by Glow (a dedicated period tracker), Glow Nurture (a pregnancy tracker), and Glow Baby (a baby development tracker). The Glow company also operates an online shop that sells several fertility-related products, including ovulation test strips, pregnancy tests, and wearable breast pumps. In 2024, Glow was reported to have approximately 25 million users across its various apps and community message boards. == History == Glow debuted in August 2013 as an iOS app. It was founded by Michael Huang and Max Levchin and launched with $6 million in Series A funding from venture capital firms Founders Fund and Andreesen Horowitz. In 2014, Glow raised an additional $17 million in Series B funding, with Formation 8 joining existing investors. In 2015, Glow launched Ruby, an app dedicated to sexual health. That year, Wired reported that the company had added features to their apps allowing men to monitor their fertility. Glow subsequently released an additional set of apps focused on pregnancy tracking and infant development. In 2016, Glow reported that it had a total of approximately 3 million users; by 2018, this had grown to 15 million. Vox described it as one of the “big two” period and fertility tracking apps and the one that had started the “boom” in the femtech space. == Application and features == Glow was initially described as a fertility application that applied data-driven methods to menstrual and ovulation tracking. Core features include cycle logging, ovulation prediction, and symptom tracking. The app also provides educational content related to reproductive health and childcare, as well as a set of online message boards that allow individuals to share experiences and seek peer support. == Privacy and legal issues == Glow has received significant media attention for its privacy and security practices. In 2016, Consumer Reports identified potential exploits in the Glow app that they claimed could have exposed private user data to hackers. Glow subsequently reported that it had fixed the vulnerabilities and told The Washington Post they had no evidence that user data had been compromised. In September 2020, the California Attorney General announced a settlement with Glow related to Consumer Reports’ findings, which included a $250,000 civil penalty. Following the US Supreme Court's 2022 Dobbs v. Jackson ruling, which legalized state-level bans on abortion, Glow (and other fertility trackers, such as Clue and Flo) came under additional scrutiny over concerns that user data on abortions could be reported to law enforcement. After this surge of media interest, a research team affiliated with the University of New South Wales conducted an investigation into the privacy practices of several popular fertility apps, including Glow. Their review of Glow was mixed, noting that they provided several privacy settings and de-identified sensitive data, but that user information could still be disclosed in the future if the app was sold. Glow rejected that claim, telling the Australian Associated Press that it "did not share" personal data. The company also cited several internal security measures it had implemented and its apps' offline data protection setting, which allows users to permanently delete their health-related data. == Reception == In 2014, Fast Company reported that 20,000 women had used Glow to conceive. Later that year, The Guardian included Glow Nurture on its list of the best iPhone apps of 2014. Media coverage often praised Glow's array of menstrual tracking options, although some reviews also noted that fertility apps are not birth control tools and cautioned against relying on them for that purpose. In 2019, Cosmopolitan singled Glow's community of users as one of its standout features.
Read more →
Voyages: The Trans-Atlantic Slave Trade Database

Voyages: The Trans-Atlantic Slave Trade Database is a database hosted at Rice University that aims to present all documentary material pertaining to the transatlantic slave trade. It is a sister project to African Origins. The database breaks down the kingdoms and countries that engaged in the Atlantic trade. By 2008, the project had gathered data on nearly 35,000 transatlantic slave voyages from 1501 to 1867. For each voyage they sought to establish dates, owners, vessels, captains, African visits, American destinations, numbers of slaves embarked, and numbers landed. They have been able to find much of this material for an estimated 80 percent of the entire transatlantic African slave trade. With corrections for missing voyages, the Project has estimated the entire size of the transatlantic slave trade with more comprehension, precision, and accuracy than before. They reckon that in 366 years, slaving vessels embarked about 12.5 million captives in Africa, and landed 10.7 million in the New World. A horrific discovery is a careful estimate that the Middle Passage took a toll of more than 1.8 million African lives. In this quantitative database, the numbers are enslaved people.
Read more →
Integrated test facility

An integrated test facility (ITF) creates a fictitious entity in a database to process test transactions simultaneously with live input. ITF can be used to incorporate test transactions into a normal production run of a system. Its advantage is that periodic testing does not require separate test processes. However, careful planning is necessary, and test data must be isolated from production data. Moreover, ITF validates the correct operation of a transaction in an application, but it does not ensure that a system is being operated correctly. Integrated test facility is considered a useful audit tool during an IT audit because it uses the same programs to compare processing using independently calculated data. This involves setting up dummy entities on an application system and processing test or production data against the entity as a means of verifying processing accuracy.
Read more →
Feature hashing

In machine learning, feature hashing, also known as the hashing trick (by analogy to the kernel trick), is a fast and space-efficient way of vectorizing features, i.e. turning arbitrary features into indices in a vector or matrix. It works by applying a hash function to the features and using their hash values as indices directly (after a modulo operation), rather than looking the indices up in an associative array. In addition to its use for encoding non-numeric values, feature hashing can also be used for dimensionality reduction. This trick is often attributed to Weinberger et al. (2009), but there exists a much earlier description of this method published by John Moody in 1989. == Motivation == === Motivating example === In a typical document classification task, the input to the machine learning algorithm (both during learning and classification) is free text. From this, a bag of words (BOW) representation is constructed: the individual tokens are extracted and counted, and each distinct token in the training set defines a feature (independent variable) of each of the documents in both the training and test sets. Machine learning algorithms, however, are typically defined in terms of numerical vectors. Therefore, the bags of words for a set of documents is regarded as a term-document matrix where each row is a single document, and each column is a single feature/word; the entry i, j in such a matrix captures the frequency (or weight) of the j'th term of the vocabulary in document i. (An alternative convention swaps the rows and columns of the matrix, but this difference is immaterial.) Typically, these vectors are extremely sparse—according to Zipf's law. The common approach is to construct, at learning time or prior to that, a dictionary representation of the vocabulary of the training set, and use that to map words to indices. Hash tables and tries are common candidates for dictionary implementation. E.g., the three documents John likes to watch movies. Mary likes movies too. John also likes football. can be converted, using the dictionary to the term-document matrix ( John likes to watch movies Mary too also football 1 1 1 1 1 0 0 0 0 0 1 0 0 1 1 1 0 0 1 1 0 0 0 0 0 1 1 ) {\displaystyle {\begin{pmatrix}{\textrm {John}}&{\textrm {likes}}&{\textrm {to}}&{\textrm {watch}}&{\textrm {movies}}&{\textrm {Mary}}&{\textrm {too}}&{\textrm {also}}&{\textrm {football}}\\1&1&1&1&1&0&0&0&0\\0&1&0&0&1&1&1&0&0\\1&1&0&0&0&0&0&1&1\end{pmatrix}}} (Punctuation was removed, as is usual in document classification and clustering.) The problem with this process is that such dictionaries take up a large amount of storage space and grow in size as the training set grows. On the contrary, if the vocabulary is kept fixed and not increased with a growing training set, an adversary may try to invent new words or misspellings that are not in the stored vocabulary so as to circumvent a machine learned filter. To address this challenge, Yahoo! Research attempted to use feature hashing for their spam filters. Note that the hashing trick isn't limited to text classification and similar tasks at the document level, but can be applied to any problem that involves large (perhaps unbounded) numbers of features. === Mathematical motivation === Mathematically, a token is an element t {\displaystyle t} in a finite (or countably infinite) set T {\displaystyle T} . Suppose we only need to process a finite corpus, then we can put all tokens appearing in the corpus into T {\displaystyle T} , meaning that T {\displaystyle T} is finite. However, suppose we want to process all possible words made of the English letters, then T {\displaystyle T} is countably infinite. Most neural networks can only operate on real vector inputs, so we must construct a "dictionary" function ϕ : T → R n {\displaystyle \phi :T\to \mathbb {R} ^{n}} . When T {\displaystyle T} is finite, of size | T | = m ≤ n {\displaystyle |T|=m\leq n} , then we can use one-hot encoding to map it into R n {\displaystyle \mathbb {R} ^{n}} . First, arbitrarily enumerate T = { t 1 , t 2 , . . , t m } {\displaystyle T=\{t_{1},t_{2},..,t_{m}\}} , then define ϕ ( t i ) = e i {\displaystyle \phi (t_{i})=e_{i}} . In other words, we assign a unique index i {\displaystyle i} to each token, then map the token with index i {\displaystyle i} to the unit basis vector e i {\displaystyle e_{i}} . One-hot encoding is easy to interpret, but it requires one to maintain the arbitrary enumeration of T {\displaystyle T} . Given a token t ∈ T {\displaystyle t\in T} , to compute ϕ ( t ) {\displaystyle \phi (t)} , we must find out the index i {\displaystyle i} of the token t {\displaystyle t} . Thus, to implement ϕ {\displaystyle \phi } efficiently, we need a fast-to-compute bijection h : T → { 1 , . . . , m } {\displaystyle h:T\to \{1,...,m\}} , then we have ϕ ( t ) = e h ( t ) {\displaystyle \phi (t)=e_{h(t)}} . In fact, we can relax the requirement slightly: It suffices to have a fast-to-compute injection h : T → { 1 , . . . , n } {\displaystyle h:T\to \{1,...,n\}} , then use ϕ ( t ) = e h ( t ) {\displaystyle \phi (t)=e_{h(t)}} . In practice, there is no simple way to construct an efficient injection h : T → { 1 , . . . , n } {\displaystyle h:T\to \{1,...,n\}} . However, we do not need a strict injection, but only an approximate injection. That is, when t ≠ t ′ {\displaystyle t\neq t'} , we should probably have h ( t ) ≠ h ( t ′ ) {\displaystyle h(t)\neq h(t')} , so that probably ϕ ( t ) ≠ ϕ ( t ′ ) {\displaystyle \phi (t)\neq \phi (t')} . At this point, we have just specified that h {\displaystyle h} should be a hashing function. Thus we reach the idea of feature hashing. == Algorithms == === Feature hashing (Weinberger et al. 2009) === The basic feature hashing algorithm presented in (Weinberger et al. 2009) is defined as follows. First, one specifies two hash functions: the kernel hash h : T → { 1 , 2 , . . . , n } {\displaystyle h:T\to \{1,2,...,n\}} , and the sign hash ζ : T → { − 1 , + 1 } {\displaystyle \zeta :T\to \{-1,+1\}} . Next, one defines the feature hashing function: ϕ : T → R n , ϕ ( t ) = ζ ( t ) e h ( t ) {\displaystyle \phi :T\to \mathbb {R} ^{n},\quad \phi (t)=\zeta (t)e_{h(t)}} Finally, extend this feature hashing function to strings of tokens by ϕ : T ∗ → R n , ϕ ( t 1 , . . . , t k ) = ∑ j = 1 k ϕ ( t j ) {\displaystyle \phi :T^{}\to \mathbb {R} ^{n},\quad \phi (t_{1},...,t_{k})=\sum _{j=1}^{k}\phi (t_{j})} where T ∗ {\displaystyle T^{}} is the set of all finite strings consisting of tokens in T {\displaystyle T} . Equivalently, ϕ ( t 1 , . . . , t k ) = ∑ j = 1 k ζ ( t j ) e h ( t j ) = ∑ i = 1 n ( ∑ j : h ( t j ) = i ζ ( t j ) ) e i {\displaystyle \phi (t_{1},...,t_{k})=\sum _{j=1}^{k}\zeta (t_{j})e_{h(t_{j})}=\sum _{i=1}^{n}\left(\sum _{j:h(t_{j})=i}\zeta (t_{j})\right)e_{i}} ==== Geometric properties ==== We want to say something about the geometric property of ϕ {\displaystyle \phi } , but T {\displaystyle T} , by itself, is just a set of tokens, we cannot impose a geometric structure on it except the discrete topology, which is generated by the discrete metric. To make it nicer, we lift it to T → R T {\displaystyle T\to \mathbb {R} ^{T}} , and lift ϕ {\displaystyle \phi } from ϕ : T → R n {\displaystyle \phi :T\to \mathbb {R} ^{n}} to ϕ : R T → R n {\displaystyle \phi :\mathbb {R} ^{T}\to \mathbb {R} ^{n}} by linear extension: ϕ ( ( x t ) t ∈ T ) = ∑ t ∈ T x t ζ ( t ) e h ( t ) = ∑ i = 1 n ( ∑ t : h ( t ) = i x t ζ ( t ) ) e i {\displaystyle \phi ((x_{t})_{t\in T})=\sum _{t\in T}x_{t}\zeta (t)e_{h(t)}=\sum _{i=1}^{n}\left(\sum _{t:h(t)=i}x_{t}\zeta (t)\right)e_{i}} There is an infinite sum there, which must be handled at once. There are essentially only two ways to handle infinities. One may impose a metric, then take its completion, to allow well-behaved infinite sums, or one may demand that nothing is actually infinite, only potentially so. Here, we go for the potential-infinity way, by restricting R T {\displaystyle \mathbb {R} ^{T}} to contain only vectors with finite support: ∀ ( x t ) t ∈ T ∈ R T {\displaystyle \forall (x_{t})_{t\in T}\in \mathbb {R} ^{T}} , only finitely many entries of ( x t ) t ∈ T {\displaystyle (x_{t})_{t\in T}} are nonzero. Define an inner product on R T {\displaystyle \mathbb {R} ^{T}} in the obvious way: ⟨ e t , e t ′ ⟩ = { 1 , if t = t ′ , 0 , else. ⟨ x , x ′ ⟩ = ∑ t , t ′ ∈ T x t x t ′ ⟨ e t , e t ′ ⟩ {\displaystyle \langle e_{t},e_{t'}\rangle ={\begin{cases}1,{\text{ if }}t=t',\\0,{\text{ else.}}\end{cases}}\quad \langle x,x'\rangle =\sum _{t,t'\in T}x_{t}x_{t'}\langle e_{t},e_{t'}\rangle } As a side note, if T {\displaystyle T} is infinite, then the inner product space R T {\displaystyle \mathbb {R} ^{T}} is not complete. Taking its completion would get us to a Hilbert space, which allows well-behaved infinite sums. Now we have an inner product space, with enough structure to describe the geometry of the feature hashing function ϕ : R T → R n {\displaystyle \phi :\ma
Read more →
Spotify Kids

Spotify Kids is a Swedish kid-friendly Music streaming service developed by Spotify. It offers curated content for children, including music, audiobooks, lullabies, and bedtime stories, while providing their parents with parental controls. The service is only available to subscribers to Spotify's Premium Family subscription plan. == Function == Spotify Kids is a Swedish Kid-friendly Music Streaming Service that allows children to browse Spotify with parental controls. Using the app, parents can view their children's listening history, block specific songs, and share playlists with their children. The app also includes sing-along songs, playlists designed for young children, and curated audiobooks, lullabies, and bedtime stories. Access is included in Spotify's Premium Family subscription plan, and is exclusive to subscribers to the plan. Users can configure the app for a specific age group upon first launch. The playlists on Spotify Kids are curated by groups including Discovery Kids, Nickelodeon, Universal Pictures, and The Walt Disney Company. All content on the Spotify Kids app is curated by editors. As of March 2021, there were roughly 8,000 songs available on the platform. The design of the Spotify Kids app is colorful, and user interface varies depending on the age group for which the app is configured. Spotify Kids is designed to comply with consent and data collection regulations for apps used by children. TechCrunch explains that it is "designed on a grand scale to drive subscriptions to Spotify's top-tier $14.99-per-month Premium Family Plan." == Release == After being beta tested in Ireland in October 2019, it was released as a beta across the United Kingdom on February 11, 2020. It was later released in Sweden, Denmark, Australia, New Zealand, Mexico, Argentina, and Brazil. On March 31, 2021, it was made available in France, Canada, and the United States.
Read more →
Digital curation

Digital curation is the selection, preservation, maintenance, collection, and archiving of digital assets. It is a process that establishes, maintains, and adds value to repositories of digital data for present and future use. The implementation of digital curation is often carried out by archivists, librarians, scientists, historians, and scholars to ensure users have access to reliable, high-quality resources. Enterprises are also starting to adopt digital curation as a means to improve the quality of information and data within their operational and strategic processes. A successful digital curation initiative will help to mitigate digital obsolescence, keeping the information accessible to users indefinitely. Digital curation includes various aspects, including digital asset management, data curation, digital preservation, and electronic records management. == Word History == Much like the word archive has layered meanings and uses, the word curation is both a noun and a verb, used originally in the field of museology to represent a wide range of activities, most often associated with collection care, long-term preservation, and exhibition design. Curation can be a reference to physical repositories that store cultural heritage or natural resource collections (e.g., a curatorial repository) or a representation of varied policies and processes involved with the long-term care and management of heritage collections, digital archives, and research data (e.g, curatorial/collections management plans, curation life-cycle, and data curation). Yet curation is also associated with short-term objectives and processes of selection and interpretation for the purposes of presentation, such as for gallery exhibitions and websites, which contribute to knowledge creation. It has also been applied to interaction with social media including compiling digital images, web links, and movie files. The term curation entered the legal framework through federal historic preservation laws, starting with the National Historic Preservation Act of 1966, and was further defined and coded into federal regulations through 36 CFR Part 79: Curation of Federally-owned and Administered Archaeological Collections. Curation has since permeated into an array of disciplines but remains closely tied to heritage and information management. == Core Principles and Activities == The term "digital curation" was first used in the e-science and biological science fields as a means of differentiating the additional suite of activities ordinarily employed by library and museum curators to add value to their collections and enable its reuse from the smaller subtask of simply preserving the data, a significantly more concise archival task. Additionally, the historical understanding of the term "curator" demands more than simple care of the collection. A curator is expected to command academic mastery of the subject matter as a requisite part of appraisal and selection of assets and any subsequent adding of value to the collection through application of metadata. === Principles === There are five commonly accepted principles that govern the occupation of digital curation: Manage the complete birth-to-retirement life cycle of the digital asset. Evaluate and cull assets for inclusion in the collection. Apply preservation methods to strengthen the asset’s integrity and reusability for future users. Act proactively throughout the asset life cycle to add value to both the digital asset and the collection. Facilitate the appropriate degree of access to users. === Methodology === The Digital Curation Center offers the following step-by-step life cycle procedures for putting the above principles into practice: Sequential Actions: Conceptualize: Consider what digital material you will be creating and develop storage options. Take into account websites, publications, email, among other types of digital output. Create: Produce digital material and attach all relevant metadata, typically the more metadata the more accessible the information. Appraise and select: Consult the mission statement of the institution or private collection and determine what digital data is relevant. There may also be legal guidelines in place that will guide the decision process for a particular collection. Ingest: Send digital material to the predetermined storage solution. This may be an archive, repository or other facility. Preservation action: Employ measures to maintain the integrity of the digital material. Store: Secure data within the predetermined storage facility. Access, use, and reuse: Determine the level of accessibility for the range of digital material created. Some material may be accessible only by password and other material may be freely accessible to the public. Routinely check that material is still accessible for the intended audience and that the material has not been compromised through multiple uses. Transform: If desirable or necessary the material may be transferred into a different digital format. Occasional Actions: Dispose: Discard any digital material that is not deemed necessary to the institution. Reappraise: Reevaluate material to ensure that is it still relevant and is true to its original form. Migrate: Migrate data to another format in order to protect data for using better in the future. == Related terms == The term "digital curation" is sometimes used interchangeably with terms such as "digital preservation" and "digital archiving." While digital preservation does focus a significant degree of energy on optimizing reusability, preservation remains a subtask to the concept of digital archiving, which is in turn a subtask of digital curation. For example, archiving is a part of curation, but so are subsequent tasks such as themed collection-building, which is not considered an archival task. Similarly, preservation is a part of archiving, as are the tasks of selection and appraisal that are not necessarily part of preservation. Data curation is another term that is often used interchangeably with digital curation, however common usage of the two terms differs. While "data" is a more all-encompassing term that can be used generally to indicate anything recorded in binary form, the term "data curation" is most common in scientific parlance and usually refers to accumulating and managing information relative to the process of research. Data-driven research of education request the role of information professional gradually develop tradition of digital service to data curation particularly at the management of digital research data. So, while documents and other discrete digital assets are technically a subset of the broader concept of data, in the context of scientific vernacular digital curation represents a broader purview of responsibilities than data curation due to its interest in preserving and adding value to digital assets of any kind. == Challenges == === Rate of creation of new data and data sets === The ever lowering cost and increasing prevalence of entirely new categories of technology has led to a quickly growing flow of new data sets. These come from well established sources such as business and government, but the trend is also driven by new styles of sensors becoming embedded in more areas of modern life. This is particularly true of consumers, whose production of digital assets is no longer relegated strictly to work. Consumers now create wider ranges of digital assets, including videos, photos, location data, purchases, and fitness tracking data, just to name a few, and share them in wider ranges of social platforms. Additionally, the advance of technology has introduced new ways of working with data. Some examples of this are international partnerships that leverage astronomical data to create "virtual observatories," and similar partnerships have also leveraged data resulting from research at the Large Hadron Collider at CERN and the database of protein structures at the Protein Data Bank. === Storage format evolution and obsolescence === By comparison, archiving of analog assets is notably passive in nature, often limited to simply ensuring a suitable storage environment. Digital preservation requires a more proactive approach. Today’s artifacts of cultural significance are notably transient in nature and prone to obsolescence when social trends or dependent technologies change. This rapid progression of technology occasionally makes it necessary to migrate digital asset holdings from one file format to another in order to mitigate the dangers of hardware and software obsolescence which would render the asset unusable. === Underestimation of human labor costs === Modern tools for program planning often underestimate the amount of human labor costs required for adequate digital curation of large collections. As a result cost-benefit assessments often paint an inaccurate picture of both the amount of work involved and the true cost to the institution for bot
Read more →
Mooky (app)

Mooky was a location-based social and dating application, designed to help its users to find the perfect match by providing a large scale of filters. Mooky was free of charge. The app made use of mobile devices' geolocation, a feature of smart phones and other devices which allows users to locate other users who are nearby. == History == Mooky was published on Google Play on April 17, 2016, by Mooky BV. The latest version of this application was version 1.0.6. == Overview == === How it works === Mooky used Facebook to build a user profile with photos and basic information, like the user's surname and age. From there on the user had to fill in their Mooky profile, which contains information about the user's height, posture, hair color, eye color, ethnicity and religion. After this the user could select its preferences to find matches nearby. === User verification === Mooky asked their users to take a selfie holding a piece of paper saying 'Mooky'. Mooky would then manually accept or decline the user verification.
Read more →
Distribution management system

A distribution management system (DMS) is a collection of applications designed to monitor and control the electric power distribution networks efficiently and reliably. It acts as a decision support system to assist the control room and field operating personnel with the monitoring and control of the electric distribution system. Improving the reliability and quality of service in terms of reducing power outages, minimizing outage time, maintaining acceptable frequency and voltage levels are the key deliverables of a DMS. Given the complexity of distribution grids, such systems may involve communication and coordination across multiple components. For example, the control of active loads may require a complex chain of communication through different components as described in US patent 11747849B2 In recent years, utilization of electrical energy increased exponentially and customer requirement and quality definitions of power were changed enormously. As electric energy became an essential part of daily life, its optimal usage and reliability became important. Real-time network view and dynamic decisions have become instrumental for optimizing resources and managing demands, leading to the need for distribution management systems in large-scale electrical networks. == Overview == Most distribution utilities have been comprehensively using IT solutions through their Outage Management System (OMS) that makes use of other systems like Customer Information System (CIS), Geographical Information System (GIS) and Interactive Voice Response System (IVRS). An outage management system has a network component/connectivity model of the distribution system. By combining the locations of outage calls from customers with knowledge of the locations of the protection devices (such as circuit breakers) on the network, a rule engine is used to predict the locations of outages. Based on this, restoration activities are charted out and the crew is dispatched for the same. In parallel with this, distribution utilities began to roll out Supervisory Control and Data Acquisition (SCADA) systems, initially only at their higher voltage substations. Over time, use of SCADA has progressively extended downwards to sites at lower voltage levels. DMSs access real-time data and provide all information on a single console at the control centre in an integrated manner. Their development varied across different geographic territories. In the US, for example, DMSs typically grew by taking Outage Management Systems to the next level, automating the complete sequences and providing an end to end, integrated view of the entire distribution spectrum. In the UK, by contrast, the much denser and more meshed network topologies, combined with stronger Health & Safety regulation, had led to early centralisation of high-voltage switching operations, initially using paper records and schematic diagrams printed onto large wallboards which were 'dressed' with magnetic symbols to show the current running states. There, DMSs grew initially from SCADA systems as these were expanded to allow these centralised control and safety management procedures to be managed electronically. These DMSs required even more detailed component/connectivity models and schematics than those needed by early OMSs as every possible isolation and earthing point on the networks had to be included. In territories such as the UK, therefore, the network component/connectivity models were usually developed in the DMS first, whereas in the USA these were generally built in the GIS. The typical data flow in a DMS has the SCADA system, the Information Storage & Retrieval (ISR) system, Communication (COM) Servers, Front-End Processors (FEPs) & Field Remote Terminal Units (FRTUs). == Why DMS? == Reduce the duration of outages Improve the speed and accuracy of outage predictions. Reduce crew patrol and drive times through improved outage locating. Improve the operational efficiency Determine the crew resources necessary to achieve restoration objectives. Effectively utilize resources between operating regions. Determine when best to schedule mutual aid crews. Increased customer satisfaction A DMS incorporates IVR and other mobile technologies, through which there is an improved outage communications for customer calls. Provide customers with more accurate estimated restoration times. Improve service reliability by tracking all customers affected by an outage, determining electrical configurations of every device on every feeder, and compiling details about each restoration process. == DMS Functions == In order to support proper decision making and O&M activities, DMS solutions should support the following functions: Network visualization & support tools Applications for Analytical & Remedial Action Utility Planning Tools System Protection Schemes The various sub functions of the same, carried out by the DMS are listed below:- === Network Connectivity Analysis (NCA) === Distribution network usually covers over a large area and catering power to different customers at different voltage levels. So locating required sources and loads on a larger GIS/Operator interface is often very difficult. Panning & zooming provided with normal SCADA system GUI does not cover the exact operational requirement. Network connectivity analysis is an operator specific functionality which helps the operator to identify or locate the preferred network or component very easily. NCA does the required analyses and provides display of the feed point of various network loads. Based on the status of all the switching devices such as circuit breaker (CB), Ring Main Unit (RMU) and/or isolators that affect the topology of the network modeled, the prevailing network topology is determined. The NCA further assists the operator to know operating state of the distribution network indicating radial mode, loops and parallels in the network. === Switching Schedule & Safety Management === In territories such as the UK a core function of a DMS has always been to support safe switching and work on the networks. Control engineers prepare switching schedules to isolate and make safe a section of network before work is carried out, and the DMS validates these schedules using its network model. Switching schedules can combine telecontrolled and manual (on-site) switching operations. When the required section has been made safe, the DMS allows a Permit To Work (PTW) document to be issued. After its cancellation when the work has been finished, the switching schedule then facilitates restoration of the normal running arrangements. Switching components can also be tagged to reflect any Operational Restrictions that are in force. The network component/connectivity model, and associated diagrams, must always be kept absolutely up to date. The switching schedule facility therefore also allows 'patches' to the network model to be applied to the live version at the appropriate stage(s) of the jobs. The term 'patch' is derived from the method previously used to maintain the wallboard diagrams. === State Estimation (SE) === The state estimator is an integral part of the overall monitoring and control systems for transmission networks. It is mainly aimed at providing a reliable estimate of the system voltages. This information from the state estimator flows to control centers and database servers across the network. The variables of interest are indicative of parameters like margins to operating limits, health of equipment and required operator action. State estimators allow the calculation of these variables of interest with high confidence despite the facts that the measurements may be corrupted by noise, or could be missing or inaccurate. Even though we may not be able to directly observe the state, it can be inferred from a scan of measurements which are assumed to be synchronized. The algorithms need to allow for the fact that presence of noise might skew the measurements. In a typical power system, the State is quasi-static. The time constants are sufficiently fast so that system dynamics decay away quickly (with respect to measurement frequency). The system appears to be progressing through a sequence of static states that are driven by various parameters like changes in load profile. The inputs of the state estimator can be given to various applications like Load Flow Analysis, Contingency Analysis, and other applications. === Load Flow Applications (LFA) === Load flow study is an important tool involving numerical analysis applied to a power system. The load flow study usually uses simplified notations like a single-line diagram and focuses on various forms of AC power rather than voltage and current. It analyzes the power systems in normal steady-state operation. The goal of a power flow study is to obtain complete voltage angle and magnitude information for each bus in a power system for specified load and generator real power and voltage conditions. Once this
Read more →
Webull

Webull Corporation, often stylized as simply Webull, is a U.S.-based financial services holding company headquartered in St. Petersburg, Florida. It owns and operates the Webull electronic trading platform for self-directed retail investors. Depending on jurisdiction, the Webull platform offers trading in stocks, exchange-traded funds (ETFs), options, margin, bonds, cryptocurrency and futures, as well as market-data tools. Webull began operations in 2016 under Hunan Fumi Information Technology, a China-based financial technology company founded by Wang Anquan. It launched U.S. brokerage services through Webull Financial LLC in 2018 and expanded during the retail-trading boom of 2020 and 2021. In April 2025, Webull became a publicly traded company on the Nasdaq through a merger with special-purpose acquisition company SK Growth Opportunities Corporation. The company's U.S. brokerage revenue relies substantially on payment for order flow, with options trading accounting for the larger share of its order-flow rebates in 2025. Webull has faced regulatory actions related to options customer approvals, complaint handling, suspicious activity reporting, social-media marketing and customer disclosures. It has also faced scrutiny from U.S. lawmakers and state officials over its historical and operational ties to China and the handling of U.S. customer data. == History == === Founding === Webull was founded in 2016 under Hunan Fumi Information Technology, a China-based financial technology company, by Wang Anquan, a former employee of Alibaba Group and Xiaomi. Hunan Fumi Information Technology received backing from Xiaomi, Shunwei Capital, and other investors in China. Fumi Technology was a Hunan-based fintech start-up incubated by Xiaomi and raised about CNY200 million (approximately US$30 million) in a Series B financing round in 2018. On May 24, 2017, Webull Financial LLC was established as a Delaware limited liability company. It began offering brokerage services in the United States in May 2018. Wang hired Anthony Denier as CEO of the U.S. brokerage that year and the two mapped out their strategy on napkins at a Mexican restaurant in New York City. Webull Corporation was incorporated in the Cayman Islands in September 2019 as the group's holding company. === Retail trading boom === In May 2020, the company received SEC approval to launch a robo-advisor on its platform. By August 2020, the platform had over 11 million registered users, and in October 2020, it had 750,000 daily active users. Webull introduced options trading in 2020 and later added cryptocurrency trading through a separate digital-asset business. In November 2020, Webull began supporting cryptocurrency transactions. In December 2020, Webull launched trading services in Hong Kong. During the GameStop short squeeze in January 2021, Webull gained attention as some retail traders looked for alternatives to Robinhood. On January 27, 2021, Webull recorded its highest-ever number of active daily users, at 952,000, and the Webull app was downloaded across the Apple App and Google Play stores an estimated 100,000 times. That week, approximately 1.2 million people downloaded the Webull mobile app, which the company reported as a 1,548% week-over-week increase. On January 28, 2021, Webull was directed by its clearing house to temporarily halt buy orders for stocks affected by the GameStop short squeeze. In June 2021, Webull was reported to be considering a U.S. initial public offering that could raise up to $400 million. === Restructuring and expansion === Webull restructured its China-related corporate arrangements in 2022 and later stated that Hunan Fumi was no longer affiliated with the group. In 2022 and 2023, Webull expanded in several non-U.S. markets, including Singapore, Australia, South Africa, Japan, the United Kingdom and Indonesia. In June 2023, Webull moved cryptocurrency trading to a separate app called Webull Pay. By the end of 2023, Webull had 4.3 million funded accounts and US$8.2 billion in customer assets. In January 2024, Anthony Denier was promoted to group president of Webull Corporation. In November 2024, Webull launched overnight, or extended-hours, trading, expanding the trading window of U.S. stocks for users inside and outside the United States. === SPAC merger and Nasdaq listing === On February 28, 2024, Webull agreed to go public through a business combination with SK Growth Opportunities Corporation (NASDAQ: SKGR), a special-purpose acquisition company, in a deal that valued the company at approximately US$7.3 billion. The proposed valuation drew scrutiny because of Webull's limited financial disclosure at announcement, reliance on payment for order flow and small expected public float. SK Growth shareholders approved the business combination on March 30, 2025, and the transaction closed on April 10, 2025. Webull's Class A ordinary shares and warrants began trading on the Nasdaq on April 11, 2025 under the ticker symbols BULL and BULLW (incentive warrants traded under BULLZ until their redemption in June 2025). The merger brought Webull to the public market but generated little cash for the company: after shareholder redemptions, Webull disclosed net proceeds of US$430,066 from the transaction. After the listing, Webull's shares experienced extreme volatility, rising as much as 500% to US$79.56 on April 14, 2025, after closing at US$13.25 on the prior trading day. The initial post-listing surge increased the value of Webull holdings owned by earlier investors, including RIT Capital Partners, which had first invested in Webull in 2021. In April 2026, after Webull's shares had fallen about 70% over the previous year, the company authorized a US$100 million share repurchase program. == Business model and financials == Webull provides a self-directed electronic trading platform available through mobile, desktop and web applications. Depending on jurisdiction, the platform offers trading in stocks, exchange-traded funds, options, margin, futures, fixed income products, cryptocurrency, cash management features and market data tools. In the United States, Webull Financial LLC is a registered broker-dealer and member of FINRA and the Securities Investor Protection Corporation, while Webull operates in other markets through locally licensed brokerage subsidiaries. Webull operates a commission-free or low-cost brokerage model for self-directed retail investors. In the United States, a substantial part of its trading-related revenue comes from payment for order flow, while in some non-U.S. markets the company more commonly charges commissions directly to customers. The platform is aimed at more active retail investors, including users seeking options tools, extended-hours trading and real-time market data. For 2025, Webull reported total revenue of US$571.0 million, up from US$390.2 million in 2024. Equity and option order-flow rebates accounted for US$304.1 million, or 53.3% of revenue, making order-flow rebates the company's largest reported revenue category. Interest-related income accounted for US$154.3 million, handling charge income for US$87.3 million and other revenue for US$25.3 million. Options were the larger component of the company's order-flow rebates in 2025, generating US$210.0 million compared with US$94.2 million from equities. Webull also generates revenue from interest-related activities, including margin financing, customer bank deposits, stock lending and corporate bank deposits. The company has stated that its interest-related income is affected by interest rates, customer cash balances, margin balances and demand for stock lending. The company had approximately 20 million registered users worldwide as of February 2024. As of December 31, 2025, it reported 26.8 million registered users, 5.0 million funded accounts and US$24.6 billion in customer assets. As of March 2025, Webull operated in Hong Kong, Singapore, Australia, South Africa, Japan, the United Kingdom, the United States, Indonesia, Canada, Brazil, Thailand, Malaysia and Mexico. == Marketing and sponsorships == Webull has used paid digital advertising, referral incentives, free-stock promotions, affiliate marketing and sports sponsorships to acquire customers and promote its brand. In its 2025 annual filing, the company reported marketing and branding expenses of US$152.3 million in 2023, US$138.7 million in 2024 and US$135.9 million in 2025. Webull said most of its advertising and promotion costs were related to paid search and paid social advertising, and that it had reduced free-stock promotions while shifting toward deposit- and asset-transfer-based incentives. In September 2021, BSE Global, the parent company of the Brooklyn Nets and New York Liberty, entered into a global multi-year agreement with Webull. Under the agreement, Webull became an official sponsor and online brokerage partner of the teams, with branding that included a jersey patch on Brooklyn Nets uniforms. Spo
Read more →
Big data

Big data primarily refers to data sets that are too large or complex to be dealt with by traditional data-processing software. Data with many entries (rows) offers greater statistical power, while data with higher complexity (more attributes or columns) may lead to a higher false discovery rate. Big data analysis challenges include capturing data, data storage, data analysis, search, sharing, transfer, visualization, querying, updating, information privacy, and data sources. Big data was originally associated with three key concepts: volume, variety, and velocity. The analysis of big data that have only volume, velocity, and variety can pose challenges in sampling. A fourth concept, veracity, which refers to the level of reliability of data, was thus added. Without sufficient investment in expertise to ensure big data veracity, the volume and variety of data can produce costs and risks that exceed an organization's capacity to create and capture value from big data. Current usage of the term big data tends to refer to the use of predictive analytics, user behavior analytics, or certain other advanced data analytics methods that extract value from big data, and seldom to a particular size of data set. "There is little doubt that the quantities of data now available are indeed large, but that's not the most relevant characteristic of this new data ecosystem." Analysis of data sets can find new correlations to "spot business trends, prevent diseases, combat crime and so on". Scientists, business executives, medical practitioners, advertising and governments alike regularly meet difficulties with large datasets in areas including Internet searches, fintech, healthcare analytics, geographic information systems, urban informatics, and business informatics. Scientists encounter limitations in e-Science work, including meteorology, genomics, connectomics, complex physics simulations, biology, and environmental research. The size and number of available data sets have grown rapidly as data is collected by devices such as mobile devices, cheap and numerous information-sensing Internet of things devices, aerial (remote sensing) equipment, software logs, cameras, microphones, radio-frequency identification (RFID) readers and wireless sensor networks. The world's technological per-capita capacity to store information has roughly doubled every 40 months since the 1980s; as of 2012, every day 2.5 exabytes (2.17×260 bytes) of data are generated. Based on an IDC report prediction, the global data volume was predicted to grow exponentially from 4.4 zettabytes to 44 zettabytes between 2013 and 2020. By 2025, IDC predicts there will be 163 zettabytes of data. According to IDC, global spending on big data and business analytics (BDA) solutions is estimated to reach $215.7 billion in 2021. Statista reported that the global big data market is forecasted to grow to $103 billion by 2027. In 2011 McKinsey & Company reported, if US healthcare were to use big data creatively and effectively to drive efficiency and quality, the sector could create more than $300 billion in value every year. In the developed economies of Europe, government administrators could save more than €100 billion ($149 billion) in operational efficiency improvements alone by using big data. And users of services enabled by personal-location data could capture $600 billion in consumer surplus. One question for large enterprises is determining who should own big-data initiatives that affect the entire organization. Relational database management systems and desktop statistical software packages used to visualize data often have difficulty processing and analyzing big data. The processing and analysis of big data may require "massively parallel software running on tens, hundreds, or even thousands of servers". What qualifies as "big data" varies depending on the capabilities of those analyzing it and their tools. Furthermore, expanding capabilities make big data a moving target. "For some organizations, facing hundreds of gigabytes of data for the first time may trigger a need to reconsider data management options. For others, it may take tens or hundreds of terabytes before data size becomes a significant consideration." == Definition == The term big data has been in use since the 1990s, with some giving credit to John Mashey for popularizing the term. Big data usually includes data sets with sizes beyond the ability of commonly used software tools to capture, curate, manage, and process data within a tolerable elapsed time. Big data philosophy encompasses unstructured, semi-structured and structured data; however, the main focus is on unstructured data. Big data "size" is a constantly moving target; as of 2012 ranging from a few dozen terabytes to many zettabytes of data. Big data requires a set of techniques and technologies with new forms of integration to reveal insights from datasets that are diverse, complex, and of a massive scale. Variability is often included as an additional quality of big data. A 2018 definition states "Big data is where parallel computing tools are needed to handle data", and notes, "This represents a distinct and clearly defined change in the computer science used, via parallel programming theories, and losses of some of the guarantees and capabilities made by Codd's relational model." In a comparative study of big datasets, Kitchin and McArdle found that none of the commonly considered characteristics of big data appear consistently across all of the analyzed cases. For this reason, other studies identified the redefinition of power dynamics in knowledge discovery as the defining trait. Instead of focusing on the intrinsic characteristics of big data, this alternative perspective pushes forward a relational understanding of the object claiming that what matters is the way in which data is collected, stored, made available and analyzed. === Big data vs. business intelligence === The growing maturity of the concept more starkly delineates the difference between "big data" and "business intelligence": Business intelligence uses applied mathematics tools and descriptive statistics with data with high information density to measure things, detect trends, etc. Big data uses mathematical analysis, optimization, inductive statistics, and concepts from nonlinear system identification to infer laws (regressions, nonlinear relationships, and causal effects) from large sets of data with low information density to reveal relationships and dependencies, or to perform predictions of outcomes and behaviors. == Characteristics == Big data can be described by the following characteristics: Volume The quantity of generated and stored data. The size of the data determines the value and potential insight, and whether it can be considered big data or not. The size of big data is usually larger than terabytes and petabytes. Variety The type and nature of the data. Earlier technologies like RDBMSs were capable to handle structured data efficiently and effectively. However, the change in type and nature from structured to semi-structured or unstructured challenged the existing tools and technologies. Big data technologies evolved with the prime intention to capture, store, and process the semi-structured and unstructured (variety) data generated with high speed (velocity), and huge in size (volume). Later, these tools and technologies were explored and used for handling structured data also but preferable for storage. Eventually, the processing of structured data was still kept as optional, either using big data or traditional RDBMSs. This helps in analyzing data towards effective usage of the hidden insights exposed from the data collected via social media, log files, sensors, etc. Big data draws from text, images, audio, video; plus it completes missing pieces through data fusion. Velocity The speed at which the data is generated and processed to meet the demands and challenges that lie in the path of growth and development. Big data is often available in real-time. Compared to small data, big data is produced more continually. Two kinds of velocity related to big data are the frequency of generation and the frequency of handling, recording, and publishing. Veracity The truthfulness or reliability of the data, which refers to the data quality and the data value. Big data must not only be large in size, but also must be reliable in order to achieve value in the analysis of it. The data quality of captured data can vary greatly, affecting an accurate analysis. Value The worth in information that can be achieved by the processing and analysis of large datasets. Value also can be measured by an assessment of the other qualities of big data. Value may also represent the profitability of information that is retrieved from the analysis of big data. Variability The characteristic of the changing formats, structure, or sources of big data. Big data can include structured, unstructured,
Read more →
KE Software

KE Software is a formerly Australian-owned computer software company based in Manchester, United Kingdom, which specialises in collection management programs for museums, galleries and archives. The Axiell Group acquired the firm in 2014. == History == KE Software had its origins in investigations into electronic systems for managing natural science collections conducted in the late 1970s under a joint program of the University of Melbourne, the then National Museum of Victoria and the Australian Museum, which led to the development of the Titan Database in 1984. Much of the credit for the development of the project was due to the work of Martin Hallett of the Museum of Victoria which evolved into Textpress, and by 2000, the KE EMu database program. KE Software was bought by Axiell in 2014 and the team merged with the Axiell staff. Axiell continues to sell and support EMu. == Products == The firm has two main products: the Ke EMu Electronic Museum management system, a collections management system for museums; and Vitalware Vital Records Management System. The first version of Ke EMu was launched in 1997 and uses the Texpress database engine with client/server architecture on a Windows or Unix/Linux server. Ke Emu is consistent with the Dublin Core / Darwin Core standards for archive and museum catalogue metadata. "The company’s clients include the three largest museums in the world.: == KE EMu == KE EMu is considered one of the more effective and purpose-designed museum cataloguing programs. particularly in the creation of public interfaces to museum catalogue data. KE EMu was further developed in 1997 as a multilingual platform, which has been utilised in bilingual institutions such as the Canadian Museum of Civilisation. Subsequently this evolved into Texpress and KE EMu (standing for Electronic MUseum) in 2000, which is "now used across the world in natural science museums with huge collections'". KE EMu is used by a large number of museums and galleries around the world, including the Smithsonian Anthropological Collection, American Museum of Natural HistoryVancouver Art Gallery, New York Botanical Garden, the University of Chicago Research Archives, the University of Pennsylvania Museum in Philadelphia, the National Museum of Australia, the Australian Museum, Museum of Victoria, University of Melbourne Archives, and the Alexander Turnbull Library, National Library of New Zealand. There are over 300 clients, and more than 5000 users of the EMu software worldwide. The program has been described as providing "...comprehensive museum management (collection management plus other administrative needs for a museum), workflow and project management, flexible metadata, various stats and metrics, and comprehensive web interface with support for mobile devices and kiosks" == KE Vitalware == The firm's vitalware software is used by a number of governments and commercial organisations for managing and accessing large data sets, such as the birth records of the Trinidad and Tobago Registrar General, the Government of Anguilla, Ministry for Infrastructure, Communications, Utility and Housing, and the Mississippi Department of Information Technology Services. == Further development == A specialist tracking component for KE EMu has been developed by Forbes Hawkins of Museum Victoria. This enables locations to be barcoded, and data to be updated as items are moved around the stores, or between venues, display, laboratories and other locations. This system has been considered by Museums around the world. The company has been working with Australian government agencies to digitize birth deaths and marriage registers in order to cross match identity data. The program has also been used for managing the Australian Plant Disease Database and the Australian Plant Pest Database as the program "...has several features that have proven to be invaluable for a plant disease database".
Read more →
Outline of robotics

The following outline is provided as an overview of and topical guide to robotics: Robotics is a branch of mechanical engineering, electrical engineering and computer science that deals with the design, construction, operation, and application of robots, as well as computer systems for their control, sensory feedback, and information processing. These technologies deal with automated machines that can take the place of humans in dangerous environments or manufacturing processes, or resemble humans in appearance, behaviour, and or cognition. Many of today's robots are inspired by nature contributing to the field of bio-inspired robotics. The word "robot" was introduced to the public by Czech writer Karel Čapek in his play R.U.R. (Rossum's Universal Robots), published in 1920. The term "robotics" was coined by Isaac Asimov in his 1941 science fiction short-story "Liar!" == Nature of robotics == Robotics can be described as: An applied science – scientific knowledge transferred into a physical environment. A branch of computer science – A branch of electrical engineering – A branch of mechanical engineering – Research and development – A branch of technology – == Branches of robotics == Adaptive control – control method used by a controller which must adapt to a controlled system with parameters which vary, or are initially uncertain. For example, as an aircraft flies, its mass will slowly decrease as a result of fuel consumption; a control law is needed that adapts itself to such changing conditions. Aerial robotics – development of unmanned aerial vehicles (UAVs), commonly known as drones, aircraft without a human pilot aboard. Their flight is controlled either autonomously by onboard computers or by the remote control of a pilot on the ground or in another vehicle. Android science – interdisciplinary framework for studying human interaction and cognition based on the premise that a very humanlike robot (that is, an android) can elicit human-directed social responses in human beings. Anthrobotics – science of developing and studying robots that are either entirely or in some way human-like. Artificial intelligence – the intelligence of machines and the branch of computer science that aims to create it. Artificial neural networks – a mathematical model inspired by biological neural networks. Autonomous car – an autonomous vehicle capable of fulfilling the human transportation capabilities of a traditional car Autonomous research robotics – Bayesian network – BEAM robotics – a style of robotics that primarily uses simple analogue circuits instead of a microprocessor in order to produce an unusually simple design (in comparison to traditional mobile robots) that trades flexibility for robustness and efficiency in performing the task for which it was designed. Behavior-based robotics – the branch of robotics that incorporates modular or behavior based AI (BBAI). Bio-inspired robotics – making robots that are inspired by biological systems. Biomimicry and bio-inspired design are sometimes confused. Biomimicry is copying the nature while bio-inspired design is learning from nature and making a mechanism that is simpler and more effective than the system observed in nature. Biomimetic – see Bionics. Biomorphic robotics – a sub-discipline of robotics focused upon emulating the mechanics, sensor systems, computing structures and methodologies used by animals. Bionics – also known as biomimetics, biognosis, biomimicry, or bionical creativity engineering is the application of biological methods and systems found in nature to the study and design of engineering systems and modern technology. Biorobotics – a study of how to make robots that emulate or simulate living biological organisms mechanically or even chemically. Cloud robotics – is a field of robotics that attempts to invoke cloud technologies such as cloud computing, cloud storage, and other Internet technologies centered around the benefits of converged infrastructure and shared services for robotics. Cognitive robotics – views animal cognition as a starting point for the development of robotic information processing, as opposed to more traditional Artificial Intelligence techniques. Clustering – Computational neuroscience – study of brain function in terms of the information processing properties of the structures that make up the nervous system. Robot control – a study of controlling robots Robotics conventions – Data mining Techniques – Degrees of freedom – in mechanics, the degree of freedom (DOF) of a mechanical system is the number of independent parameters that define its configuration. It is the number of parameters that determine the state of a physical system and is important to the analysis of systems of bodies in mechanical engineering, aeronautical engineering, robotics, and structural engineering. Developmental robotics – a methodology that uses metaphors from neural development and developmental psychology to develop the mind for autonomous robots Digital control – a branch of control theory that uses digital computers to act as system controllers. Digital image processing – the use of computer algorithms to perform image processing on digital images. Dimensionality reduction – the process of reducing the number of random variables under consideration, and can be divided into feature selection and feature extraction. Distributed robotics – Electronic stability control – is a computerized technology that improves the safety of a vehicle's stability by detecting and reducing loss of traction (skidding). Evolutionary computation – Evolutionary robotics – a methodology that uses evolutionary computation to develop controllers for autonomous robots Extended Kalman filter – Flexible Distribution functions – Feedback control and regulation – Human–computer interaction – a study, planning and design of the interaction between people (users) and computers Human robot interaction – a study of interactions between humans and robots Intelligent vehicle technologies – comprise electronic, electromechanical, and electromagnetic devices - usually silicon micromachined components operating in conjunction with computer controlled devices and radio transceivers to provide precision repeatability functions (such as in robotics artificial intelligence systems) emergency warning validation performance reconstruction. Computer vision – Machine vision – Kinematics – study of motion, as applied to robots. This includes both the design of linkages to perform motion, their power, control and stability; also their planning, such as choosing a sequence of movements to achieve a broader task. Laboratory robotics – the act of using robots in biology or chemistry labs Robot learning – learning to perform tasks such as obstacle avoidance, control and various other motion-related tasks Direct manipulation interface – In computer science, direct manipulation is a human–computer interaction style which involves continuous representation of objects of interest and rapid, reversible, and incremental actions and feedback. The intention is to allow a user to directly manipulate objects presented to them, using actions that correspond at least loosely to the physical world. Manifold learning – Microrobotics – a field of miniature robotics, in particular mobile robots with characteristic dimensions less than 1 mm Motion planning – (a.k.a., the "navigation problem", the "piano mover's problem") is a term used in robotics for the process of detailing a task into discrete motions. Motor control – information processing related activities carried out by the central nervous system that organize the musculoskeletal system to create coordinated movements and skilled actions. Nanorobotics – the emerging technology field creating machines or robots whose components are at or close to the scale of a nanometer (10−9 meters). Passive dynamics – refers to the dynamical behavior of actuators, robots, or organisms when not drawing energy from a supply (e.g., batteries, fuel, ATP). Programming by Demonstration – an End-user development technique for teaching a computer or a robot new behaviors by demonstrating the task to transfer directly instead of programming it through machine commands. Quantum robotics – a subfield of robotics that deals with using quantum computers to run robotics algorithms more quickly than digital computers can. Rapid prototyping – automatic construction of physical objects via additive manufacturing from virtual models in computer aided design (CAD) software, transforming them into thin, virtual, horizontal cross-sections and then producing successive layers until the items are complete. As of June 2011, used for making models, prototype parts, and production-quality parts in relatively small numbers. Reinforcement learning – an area of machine learning in computer science, concerned with how an agent ought to take actions in an environment so as to maximize some notion of cumulative reward. Robot
Read more →
Mobile Passport Control

Mobile Passport Control (MPC) is a mobile app that enables eligible travelers entering the United States to submit their passport information and customs declaration form to Customs and Border Protection via smartphone or tablet and go through the inspections process using an expedited lane. It is available to "U.S. citizens, U.S. lawful permanent residents, Canadian B1/B2 citizen visitors and returning Visa Waiver Program travelers with approved ESTA". The app is available on iOS and Android devices and is operational at 34 US airports, 14 international airports offering preclearance facilities, and 4 seaports. The use of Mobile Passport Control operations have increased threefold from 2016 to 2017. == History == Mobile Passport Control operations were launched in Atlanta at the Hartsfield-Jackson International Airport in 2016 and is now available at 34 U.S. airports, 14 international airports that offer preclearance and 4 U.S. cruise ports. The Mobile Passport app is authorized by CBP and sponsored by the Airports Council International-North America, Boeing, and the Port of Everglades. Airside Mobile, Inc. secured a Series A funding of $6 million in the fall of 2017. == How it works == During the customs process at the Federal Inspection Service (FIS) area of a U.S. airport, travelers arriving from international locations typically wait in long lines before presenting passports and paperwork and verbally answering questions made by CBP officials. Eligible travelers who have downloaded the Mobile Passport app can expedite this process by submitting information regarding their passport and trip details, and a newly-taken selfie, via their mobile device to CBP officials, then access an expedited line. Mobile Passport Control users will be required to show their physical passport(s) and briefly talk to a CBP officer. == Locations == === US airports === Atlanta (ATL) Baltimore (BWI) Boston (BOS) Charlotte (CLT) Chicago (ORD) Dallas/Ft Worth (DFW) Denver (DEN) Detroit (DTW) as of 7/2024 Ft. Lauderdale (FLL) Honolulu (HNL) Houston (HOU and IAH) Kansas City (MCI) Las Vegas (LAS) Los Angeles (LAX) Miami (MIA) Minneapolis (MSP) New York (JFK) Newark (EWR) Oakland (OAK) Orlando (MCO) Palm Beach (PBI) Philadelphia (PHL) Phoenix (PHX) Pittsburgh (PIT) Portland (PDX) Sacramento (SMF) San Diego (SAN) San Francisco (SFO) San Jose (SJC) San Juan (SJU) Seattle (SEA) Tampa (TPA) Washington Dulles (IAD) === International Preclearance locations === Abu Dhabi (AUH) Aruba (AUA) Bermuda (BDA) Calgary (YYC) Dublin (DUB) Edmonton (YEG) Halifax (YHZ) Montreal (YUL) Nassau (NAS) Ottawa (YOW) Shannon (SNN) Toronto (YYZ) Vancouver (YVR) Winnipeg (YWG) Sepinggan (BPN) === Seaports === Fort Lauderdale (PEV) Miami (MSE) San Juan (PUE) West Palm Beach (WPB)
Read more →
Jordan Antiquities Database and Information System

The Jordan Antiquities Database and Information System (JADIS) was a computer database of antiquities in Jordan, the first of its kind in the Arab world. It was established by the Department of Antiquities in 1990, in cooperation with the American Center for Oriental Research in Amman and sponsored by the United States Agency for International Development. JADIS was in use until 2002, when it was superseded by a new system, MEGA-J. Over 10,841 antiquities were registered in the database. An introduction and printed summary of the database was published by the Department of Antiquities in 1994, edited by Gaetano Palumbo.
Read more →