AI Headshot Linkedin Generator

AI Headshot Linkedin Generator — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

RockMyRun

Rock My Run (stylized as RockMyRun; trademarked slogan: "The Best Running Music in the World™") is a mobile running/fitness app founded in 2011 that provides running and workout music in the form of DJ mixes. It is owned by Rock My World, Inc., a health and fitness technology company based in San Diego, California. The app allows users to listen to these professional DJ mixes on their smartphone while running or working out to enhance and motivate their performance. Rock My World, Inc. also developed the app Jolt.ai for the software Slack. == History == During the early stages of the company, Rock My World, Inc. raised more than $2 million in funding generated by the Irvine Company's The Vine SD and from institutional investors including Skullcandy, ZTE and Lighter Capital and were admitted to the Plug and Play Tech Center in Sunnyvale and to the tech incubator EvoNexus in San Diego. In an interview with co-founder and ex-Qualcomm staff Adam Riggs-Zeigen, he said that "from the beginning [their] big goal is to help people live healthier lives." == Features == The RockMyRun app contains thousands of mixes or "stations" produced by its professional DJs intended to increase enjoyment and performance during exercise. DJs who have provided mixes for the app include David Guetta, Zedd, Steve Aoki, Major Lazer and Afrojack. All of the music can be personalized based on the user's steps per minute, heart rate or ideal cadence allowing the user to "always hear the right music at the right time at the right tempo". All RockMyRun mixes are organized into stations to help users discover music that suits their needs. RockMyRun contains mixes of all genres and each station is categorized into their respective genres and displays tags to let users know the type of music contained in the mix. RockMyRun has two membership types; it is free as a standard member, but for uninterrupted listening and additional features, users can upgrade to a paid "Rockstar" membership. Since March 2023, couples can now be on the same RockMyRun playlists and "share" earbuds. This allows people to train together, easier. A group of DJs curate playlists for specific training needs and different energy levels. == Reception == RockMyRun has been featured on television programs such as The Today Show on two occasions and on The Rachael Ray Show, and in positive reviews by many publications and websites including The New York Times on four separate occasions, TIME, The Huffington Post, The Denver Post, Men's Fitness, Real Simple, The Vulcan Post, The L.A. Times, Glamour, Paste magazine, PCMag, Dubai Week, BetaNews, CNET, CNBC, Reuters, Insider, Tom's Guide and Yahoo! Tech. RockMyRun has also been mentioned/recommended in books/publications such as A Practical Guide to Teacher Wellbeing by Elizabeth Holmes and Applying Music in Exercise and Sport by Dr. Costas Karageorghis. Ultimate Ears placed RockMyRun at the top of their list at No. 1 on their "5 Favorite Workout Music Apps". In a positive review by David Strausser for AndroidGuys in 2015, he praised the app in a detailed review, saying "The mixes are incredible and the rates are reasonable. The app is quick, beautiful." In 2015, Jill Duffy of PC Magazine gave a review of the app, pointing out its key features, and stating that the app is great if you enjoy listening to different, or new music, that can match your tempo while running. Also in 2015, Digital Trends listed RockMyRun, as one of the best exercise music apps in the article "No need to make exercise playlists with these music apps". In 2018, Redbull.com recommended RockMyRun in preparation for the Wings for Life World Run in their article "10 essential hacks for running to work to get you in World Run shape". In 2019, The Fashion Spot included RockMyRun in their list of "The Best Workout Apps for People Who Hate to Work Out", saying: "RockMyRun matches music to the tempo of your running pace – the music literally follows your steps/heart rate. The app has thousands of mixes/music options along with tracking capabilities." Also in 2019, MakeUseOf.com included RockMyRun in their list of "The 7 Best Running and Workout Music Apps". In September 2022, VeryWellFit listed RockMyRun as the first of three "Other Playlist Options" in the article "How to Create a Running Playlist, According to Running Coaches". Tech Grapple recommended the app in "The best workout free music apps for iPhone and Android" saying that "RockMyRun is the best application that you can use during workout. It comes with amazing DJs to craft mixes that will keep you moving." == Partners == RockMyRun is partnered with the following brands/companies: C25K Del Taco JLab Audio iFit Active Network, LLC Night Nation Run (the world's first running music festival) Lady Foot Locker Mayweather Boxing + Fitness Mio Global Orangetheory Fitness Red Rock Apps Tapout Fitness
Read more →
Enterprise mobile application

The term enterprise mobile application is used in the context of mobile apps created/brought by individual organizations for their workers to carry out the functions required to run the organization. It is the process of building a mobile application for the requirements of an enterprise. An enterprise mobile application belonging to an organization is expected to be used by only the workers of that organization. The definition of enterprise mobile application does not include the mobile apps that an organization create for its customers or consumers of the products or services generated by the organization. == Example == An organization, whether for-profit or non-profit, may create a mobile app for its members to track inventory levels of supplies they distribute to their target communities or materials used in product manufacturing. Such a mobile app comes under the definition of enterprise mobile application. However, the same organization may also create another mobile app to sell their products to end users or spread awareness of their services to various communities, and that mobile app would not come under definition of enterprise mobile application. == Enterprise mobile solution providers == Enterprise Mobile solution providers create and develop apps for individual organizations that can buy instead of creating the apps themselves. Reasons for Organizations buying the apps include time and cost savings, technical expertise. Today Enterprise Mobility is playing track role for enterprise transformation. Today, enterprises needs productivity is a fast way. Enterprise mobility helps business owners to build their work in a progressive way by assisting enterprise mobility solutions.
Read more →
Coolgorilla

Coolgorilla was one of the earliest software developers that created 3rd party native applications for Apple iPod devices. Coolgorilla was an early adopter of using a sponsorship business model to enable mobile applications to be given away freely. Coolgorilla developed a series of Talking Phrasebooks for iPods in 2006. They partnered with online travel company lastminute.com who sponsored the applications enabling them to be made available to download completely free of charge. As mobile devices became more sophisticated, Coolgorilla developed the Talking Phrasebooks for Sony Ericsson and Nokia Mobile Devices which at the time were considerably noteworthy since the applications used real voice audio translations. With Apple's introduction of the iPhone in 2007, Coolgorilla developed a Web App before having four of the iPhone Talking Phrasebooks available to download from Apple's App Store on the day it opened in 2008. == Almanac in Chronological Order == On 23 December 2005, CoolGorilla, a new start-up, launched a trivia game for the iPod. It was titled "Rock and Pop Quiz". It was a quiz game that tested users' knowledge on bands such as U2, Metallica, Beyonce, and the Beatles. The quiz contained twenty megabytes of audible trivia questions. The free game was compatible with 3rd, 4th and 5th generation iPods, iPod mini and nano. In March 2006, Coolgorilla released "Movie Quiz for iPods" with a price of $5. It was an audio game narrated by New York's DJ Thomas, a radio and television host, voice over artist and event Master of Ceremonies. There were questions on Star Wars, Spiderman, The Godfather, Pulp Fiction, The Matrix, James Bond, and others. The user could keep track of their score. The game included a secret code for players who answered all questions correctly which enabled users to enter their name on the Coolgorilla Hall of Fame. In May 2006, Coolgorilla launched a World Cup Encyclopedia which was released prior to the 2006 FIFA World Cup. It had information on the World Cup schedule, details of every player from every team, every score from every world cup game ever played, stadium details, and manager profiles. It was a free download. In June 2006, Coolgorilla released a series of iPod Phrasebooks in German, Greek, French and Spanish. They were sponsored by lastminute.com and were free. The phrasebooks included common words and phrases for tourists with 750 sound files. They were accessed through the iPod's Notes feature. In April 2007, Coolgorilla released a downloadable version of the Talking Phrasebooks for Nokia and Sony Ericsson mobile devices. French, Spanish, German, Greek, Italian, and Portuguese were produced. The application provided real voice translations. They initially sold for £3 but 3 months later were offered for free. The branding was lastminute.com branding. Apple's iPhone was released at the end of June 2007. Soon after, Coolgorilla released an online all-in-one version of their Talking Phrasebooks for iPhone (Web App). The Phrasebooks were made available online in the form of a web app as iPhone did not yet allow for the download of additional apps. The app provided both text and audio translations in French, Spanish, Portuguese, Italian, German, and Greek. The iPhone translated the phrases using the recordings of real, native voice-over artists. A text translation on screen was also displayed. Apple's App Store opened in July 2008 with approximately 500 native apps available. Four of these Apps were Coolgorilla's Talking Phrasebooks for iPhone (Native Apps). There was French, German, Italian, and Spanish. These Apps carried lastminute.com branding and were available for free download. In the first three weeks following their release, the phrasebooks had over 350,000 downloads. Subsequently, Dutch, Arabic, Mandarin and Cantonese were also released. In October 2008, Coolgorilla released an iPhone London Travel Guide. Coolgorilla featured on NBC News in August 2009. In 2010, FIAT used the Italian Phrasebook to help promote the release of their FIAT 500 in the US. There has been no further activity since.
Read more →
Robinson compass mask

In image processing, a Robinson compass mask is a type of compass mask used for edge detection. It has eight major compass orientations, each will extract the edges in respect to its direction. A combined use of compass masks of different directions could detect the edges from different angles. == Technical explanation == The Robinson compass mask is defined by taking a single mask and rotating it to form eight orientations: North: [ − 1 0 1 − 2 0 2 − 1 0 1 ] {\displaystyle {\text{North:}}{\begin{bmatrix}-1&0&1\\-2&0&2\\-1&0&1\end{bmatrix}}} North West: [ 0 1 2 − 1 0 1 − 2 − 1 0 ] {\displaystyle {\text{North West:}}{\begin{bmatrix}0&1&2\\-1&0&1\\-2&-1&0\end{bmatrix}}} West: [ 1 2 1 0 0 0 − 1 − 2 − 1 ] {\displaystyle {\text{West:}}{\begin{bmatrix}1&2&1\\0&0&0\\-1&-2&-1\end{bmatrix}}} South West: [ 2 1 0 1 0 − 1 0 − 1 − 2 ] {\displaystyle {\text{South West:}}{\begin{bmatrix}2&1&0\\1&0&-1\\0&-1&-2\end{bmatrix}}} South: [ 1 0 − 1 2 0 − 2 1 0 − 1 ] {\displaystyle {\text{South:}}{\begin{bmatrix}1&0&-1\\2&0&-2\\1&0&-1\end{bmatrix}}} South East: [ 0 − 1 − 2 1 0 − 1 2 1 0 ] {\displaystyle {\text{South East:}}{\begin{bmatrix}0&-1&-2\\1&0&-1\\2&1&0\end{bmatrix}}} East: [ − 1 − 2 − 1 0 0 0 1 2 1 ] {\displaystyle {\text{East:}}{\begin{bmatrix}-1&-2&-1\\0&0&0\\1&2&1\end{bmatrix}}} North East: [ − 2 − 1 0 − 1 0 1 0 1 2 ] {\displaystyle {\text{North East:}}{\begin{bmatrix}-2&-1&0\\-1&0&1\\0&1&2\end{bmatrix}}} The direction axis is the line of zeros in the matrix. Robinson compass mask is similar to kirsch compass masks, but is simpler to implement. Since the matrix coefficients only contains 0, 1, 2, and are symmetrical, only the results of four masks need to be calculated, the other four results are the negation of the first four results. An edge, or contour is an tiny area with neighboring distinct pixel values. The convolution of each mask with the image would create a high value output where there is a rapid change of pixel value, thus an edge point is found. All the detected edge points would line up as edges. == Example == An example of Robinson compass masks applied to the original image. Obviously, the edges in the direction of the mask is enhanced.
Read more →
Artificial Linguistic Internet Computer Entity

A.L.I.C.E. (Artificial Linguistic Internet Computer Entity), also referred to as Alicebot, or simply Alice, is a natural language processing chatbot—a program that engages in a conversation with a human by applying some heuristical pattern matching rules to the human's input. It was inspired by Joseph Weizenbaum's classical ELIZA program. It is one of the strongest programs of its type and has won the Loebner Prize, awarded to accomplished humanoid, talking robots, three times (in 2000, 2001, and 2004). The program is unable to pass the Turing test, as even the casual user will often expose its mechanistic aspects in short conversations. Alice was originally composed by Richard Wallace; it "came to life" on November 23, 1995. The program was rewritten in Java beginning in 1998. The current incarnation of the Java implementation is Program D. The program uses an XML Schema called AIML (Artificial Intelligence Markup Language) for specifying the heuristic conversation rules. Alice code has been reported to be available as open source. The AIML source is available from ALICE A.I. Foundation on Google Code and from the GitHub account of Richard Wallace. These AIML files can be run using an AIML interpreter like Program O or Program AB. == In popular culture == Spike Jonze has cited ALICE as the inspiration for his academy award-winning film Her, in which a human falls in love with a chatbot. In a New Yorker article titled “Can Humans Fall in Love with Bots?” Jonze said “that the idea originated from a program he tried about a decade ago called the ALICE bot, which engages in friendly conversation.” The Los Angeles Times reported:Though the film’s premise evokes comparisons to Siri, Jonze said he actually had the idea well before the Apple digital assistant came along, after using a program called Alicebot about ten years ago. As geek nostalgists will recall, that intriguing if at times crude software (it flunked the industry-standard Turing Test) would attempt to engage users in everyday chatter based on a database of prior conversations. Jonze liked it, and decided to apply a film genre to it. “I thought about that idea, and what if you had a real relationship with it?” Jonze told reporters. “And I used that as a way to write a relationship movie and a love story.”
Read more →
Progressive Graphics File

PGF (Progressive Graphics File) is a wavelet-based bitmapped image format that employs lossless and lossy data compression. PGF was created to improve upon and replace the JPEG format. It was developed at the same time as JPEG 2000 but with a focus on speed over compression ratio. PGF can operate at higher compression ratios without taking more encoding/decoding time and without generating the characteristic "blocky and blurry" artifacts of the original DCT-based JPEG standard. It also allows more sophisticated progressive downloads. == Color models == PGF supports a wide variety of color models: Grayscale with 1, 8, 16, or 31 bits per pixel Indexed color with palette size of 256 RGB color image with 12, 16 (red: 5 bits, green: 6 bits, blue: 5 bits), 24, or 48 bits per pixel ARGB color image with 32 bits per pixel Lab color image with 24 or 48 bits per pixel CMYK color image with 32 or 64 bits per pixel == Technical discussion == PGF claims to achieve an improved compression quality over JPEG adding or improving features such as scalability. Its compression performance is similar to the original JPEG standard. Very low and very high compression rates (including lossless compression) are also supported in PGF. The ability of the design to handle a very large range of effective bit rates is one of the strengths of PGF. For example, to reduce the number of bits for a picture below a certain amount, the advisable thing to do with the first JPEG standard is to reduce the resolution of the input image before encoding it — something that is ordinarily not necessary for that purpose when using PGF because of its wavelet scalability properties. The PGF process chain contains the following four steps: Color space transform (in case of color images) Discrete Wavelet Transform Quantization (in case of lossy data compression) Hierarchical bit-plane run-length encoding === Color components transformation === Initially, images have to be transformed from the RGB color space to another color space, leading to three components that are handled separately. PGF uses a fully reversible modified YUV color transform. The transformation matrices are: [ Y r U r V r ] = [ 1 4 1 2 1 4 1 − 1 0 0 − 1 1 ] [ R G B ] ; [ R G B ] = [ 1 3 4 − 1 4 1 − 1 4 − 1 4 1 − 1 4 3 4 ] [ Y r U r V r ] {\displaystyle {\begin{bmatrix}Y_{r}\\U_{r}\\V_{r}\end{bmatrix}}={\begin{bmatrix}{\frac {1}{4}}&{\frac {1}{2}}&{\frac {1}{4}}\\1&-1&0\\0&-1&1\end{bmatrix}}{\begin{bmatrix}R\\G\\B\end{bmatrix}};\qquad \qquad {\begin{bmatrix}R\\G\\B\end{bmatrix}}={\begin{bmatrix}1&{\frac {3}{4}}&-{\frac {1}{4}}\\1&-{\frac {1}{4}}&-{\frac {1}{4}}\\1&-{\frac {1}{4}}&{\frac {3}{4}}\end{bmatrix}}{\begin{bmatrix}Y_{r}\\U_{r}\\V_{r}\end{bmatrix}}} The chrominance components can be, but do not necessarily have to be, down-scaled in resolution. === Wavelet transform === The color components are then wavelet transformed to an arbitrary depth. In contrast to JPEG 1992 which uses an 8x8 block-size discrete cosine transform, PGF uses one reversible wavelet transform: a rounded version of the biorthogonal CDF 5/3 wavelet transform. This wavelet filter bank is exactly the same as the reversible wavelet used in JPEG 2000. It uses only integer coefficients, so the output does not require rounding (quantization) and so it does not introduce any quantization noise. === Quantization === After the wavelet transform, the coefficients are scalar-quantized to reduce the amount of bits to represent them, at the expense of a loss of quality. The output is a set of integer numbers which have to be encoded bit-by-bit. The parameter that can be changed to set the final quality is the quantization step: the greater the step, the greater is the compression and the loss of quality. With a quantization step that equals 1, no quantization is performed (it is used in lossless compression). In contrast to JPEG 2000, PGF uses only powers of two, therefore the parameter value i represents a quantization step of 2i. Just using powers of two makes no need of integer multiplication and division operations. === Coding === The result of the previous process is a collection of sub-bands which represent several approximation scales. A sub-band is a set of coefficients — integer numbers which represent aspects of the image associated with a certain frequency range as well as a spatial area of the image. The quantized sub-bands are split further into blocks, rectangular regions in the wavelet domain. They are typically selected in a way that the coefficients within them across the sub-bands form approximately spatial blocks in the (reconstructed) image domain and collected in a fixed size macroblock. The encoder has to encode the bits of all quantized coefficients of a macroblock, starting with the most significant bits and progressing to less significant bits. In this encoding process, each bit-plane of the macroblock gets encoded in two so-called coding passes, first encoding bits of significant coefficients, then refinement bits of significant coefficients. Clearly, in lossless mode all bit-planes have to be encoded, and no bit-planes can be dropped. Only significant coefficients are compressed with an adaptive run-length/Rice (RLR) coder, because they contain long runs of zeros. The RLR coder with parameter k (logarithmic length of a run of zeros) is also known as the elementary Golomb code of order 2k. === Comparison with other file formats === JPEG 2000 is slightly more space-efficient in handling natural images. The PSNR for the same compression ratio is on average 3% better than the PSNR of PGF. It has a small advantage in compression ratio but longer encoding and decoding times. PNG (Portable Network Graphics) is more space-efficient in handling images with many pixels of the same color. There are several self-proclaimed advantages of PGF over the ordinary JPEG standard: Superior compression performance: The image quality (measured in PSNR) for the same compression ratio is on average 3% better than the PSNR of JPEG. At lower bit rates (e.g. less than 0.25 bits/pixel for gray-scale images), PGF has a much more significant advantage over certain modes of JPEG: artifacts are less visible and there is almost no blocking. The compression gains over JPEG are attributed to the use of DWT. Multiple resolution representation: PGF provides seamless compression of multiple image components, with each component carrying from 1 to 31 bits per component sample. With this feature there is no need for separately stored preview images (thumbnails). Progressive transmission by resolution accuracy, commonly referred to as progressive decoding: PGF provides efficient code-stream organizations which are progressive by resolution. This way, after a smaller part of the whole file has been received, it is possible to see a lower quality of the final picture, the quality can be improved monotonically getting more data from the source. Lossless and lossy compression: PGF provides both lossless and lossy compression in a single compression architecture. Both lossy and lossless compression are provided by the use of a reversible (integer) wavelet transform. Side channel spatial information: Transparency and alpha planes are fully supported ROI extraction: Since version 5, PGF supports extraction of regions of interest (ROI) without decoding the whole image. == Available software == The author published libPGF via a SourceForge, under the GNU Lesser General Public License version 2.0. Xeraina offers a free Windows console encoder and decoder, and PGF viewers based on WIC for 32bit and 64bit Windows platforms. Other WIC applications including File Explorer are able to display PGF images after installing this viewer. Digikam is a popular open-source image editing and cataloging software that uses libPGF for its thumbnails. It makes use of the progressive decoding feature of PGF images to store a single version of each thumbnail, which can then be decoded to different resolutions without loss, thus allowing users to dynamically change the size of the thumbnails without having to recalculate them again.
Read more →
Separable filter

A separable filter in image processing can be written as product of two more simple filters. Typically a 2-dimensional convolution operation is separated into two 1-dimensional filters. This reduces the computational costs on an N × M {\displaystyle N\times M} image with a m × n {\displaystyle m\times n} filter from O ( M ⋅ N ⋅ m ⋅ n ) {\displaystyle {\mathcal {O}}(M\cdot N\cdot m\cdot n)} down to O ( M ⋅ N ⋅ ( m + n ) ) {\displaystyle {\mathcal {O}}(M\cdot N\cdot (m+n))} . == Examples == 1. A two-dimensional smoothing filter: 1 3 [ 1 1 1 ] ∗ 1 3 [ 1 1 1 ] = 1 9 [ 1 1 1 1 1 1 1 1 1 ] {\displaystyle {\frac {1}{3}}{\begin{bmatrix}1\\1\\1\end{bmatrix}}{\frac {1}{3}}{\begin{bmatrix}1&1&1\end{bmatrix}}={\frac {1}{9}}{\begin{bmatrix}1&1&1\\1&1&1\\1&1&1\end{bmatrix}}} 2. Another two-dimensional smoothing filter with stronger weight in the middle: 1 4 [ 1 2 1 ] ∗ 1 4 [ 1 2 1 ] = 1 16 [ 1 2 1 2 4 2 1 2 1 ] {\displaystyle {\frac {1}{4}}{\begin{bmatrix}1\\2\\1\end{bmatrix}}{\frac {1}{4}}{\begin{bmatrix}1&2&1\end{bmatrix}}={\frac {1}{16}}{\begin{bmatrix}1&2&1\\2&4&2\\1&2&1\end{bmatrix}}} 3. The Sobel operator, used commonly for edge detection: [ 1 2 1 ] ∗ [ 1 0 − 1 ] = [ 1 0 − 1 2 0 − 2 1 0 − 1 ] {\displaystyle {\begin{bmatrix}1\\2\\1\end{bmatrix}}{\begin{bmatrix}1&0&-1\end{bmatrix}}={\begin{bmatrix}1&0&-1\\2&0&-2\\1&0&-1\end{bmatrix}}} This works also for the Prewitt operator. In the examples, there is a cost of 3 multiply–accumulate operations for each vector which gives six total (horizontal and vertical). This is compared to the nine operations for the full 3x3 matrix. Another notable example of a separable filter is the Gaussian blur whose performance can be greatly improved the bigger the convolution window becomes.
Read more →
Motor theory of speech perception

The motor theory of speech perception is the hypothesis that people perceive spoken words by identifying the vocal tract gestures with which they are pronounced rather than by identifying the sound patterns that speech generates. It originally claimed that speech perception is done through a specialized module that is innate and human-specific. Though the idea of a module has been qualified in more recent versions of the theory, the idea remains that the role of the speech motor system is not only to produce speech articulations but also to detect them. The hypothesis has gained more interest outside the field of speech perception than inside. This has increased particularly since the discovery of mirror neurons that link the production and perception of motor movements, including those made by the vocal tract. The theory was initially proposed in the Haskins Laboratories in the 1950s by Alvin Liberman and Franklin S. Cooper, and developed further by Donald Shankweiler, Michael Studdert-Kennedy, Ignatius Mattingly, Carol Fowler and Douglas Whalen. == Origins and development == The hypothesis has its origins in research using pattern playback to create reading machines for the blind that would substitute sounds for orthographic letters. This led to a close examination of how spoken sounds correspond to the acoustic spectrogram of them as a sequence of auditory sounds. This found that successive consonants and vowels overlap in time with one another (a phenomenon known as coarticulation). This suggested that speech is not heard like an acoustic "alphabet" or "cipher," but as a "code" of overlapping speech gestures. === Associationist approach === Initially, the theory was associationist: infants mimic the speech they hear and that this leads to behavioristic associations between articulation and its sensory consequences. Later, this overt mimicry would be short-circuited and become speech perception. This aspect of the theory was dropped, however, with the discovery that prelinguistic infants could already detect most of the phonetic contrasts used to separate different speech sounds. === Cognitivist approach === The behavioristic approach was replaced by a cognitivist one in which there was a speech module. The module detected speech in terms of hidden distal objects rather than at the proximal or immediate level of their input. The evidence for this was the research finding that speech processing was special such as duplex perception. === Changing distal objects === Initially, speech perception was assumed to link to speech objects that were both the invariant movements of speech articulators the invariant motor commands sent to muscles to move the vocal tract articulators This was later revised to include the phonetic gestures rather than motor commands, and then the gestures intended by the speaker at a prevocal, linguistic level, rather than actual movements. === Modern revision === The "speech is special" claim has been dropped, as it was found that speech perception could occur for nonspeech sounds (for example, slamming doors for duplex perception). === Mirror neurons === The discovery of mirror neurons has led to renewed interest in the motor theory of speech perception, and the theory still has its advocates, although there are also critics. == Support == === Nonauditory gesture information === If speech is identified in terms of how it is physically made, then nonauditory information should be incorporated into speech percepts even if it is still subjectively heard as "sounds". This is, in fact, the case. The McGurk effect shows that seeing the production of a spoken syllable that differs from an auditory cue synchronized with it affects the perception of the auditory one. In other words, if someone hears "ba" but sees a video of someone pronouncing "ga", what they hear is different—some people believe they hear "da". People find it easier to hear speech in noise if they can see the speaker. People can hear syllables better when their production can be felt haptically. === Categorical perception === Using a speech synthesizer, speech sounds can be varied in place of articulation along a continuum from /bɑ/ to /dɑ/ to /ɡɑ/, or in voice onset time on a continuum from /dɑ/ to /tɑ/ (for example). When listeners are asked to discriminate between two different sounds, they perceive sounds as belonging to discrete categories, even though the sounds vary continuously. In other words, 10 sounds (with the sound on one extreme being /dɑ/ and the sound on the other extreme being /tɑ/, and the ones in the middle varying on a scale) may all be acoustically different from one another, but the listener will hear all of them as either /dɑ/ or /tɑ/. Likewise, the English consonant /d/ may vary in its acoustic details across different phonetic contexts (the /d/ in /du/ does not technically sound the same as the one in /di/, for example), but all /d/'s as perceived by a listener fall within one category (voiced alveolar plosive) and that is because "linguistic representations are abstract, canonical, phonetic segments or the gestures that underlie these segments." This suggests that humans identify speech using categorical perception, and thus that a specialized module, such as that proposed by the motor theory of speech perception, may be on the right track. === Speech imitation === If people can hear the gestures in speech, then the imitation of speech should be very fast, as in when words are repeated that are heard in headphones as in speech shadowing. People can repeat heard syllables more quickly than they would be able to produce them normally. === Speech production === Hearing speech activates vocal tract muscles, and the motor cortex and premotor cortex. The integration of auditory and visual input in speech perception also involves such areas. Disrupting the premotor cortex disrupts the perception of speech units such as plosives. The activation of the motor areas occurs in terms of the phonemic features which link with the vocal track articulators that create speech gestures. The perception of a speech sound is aided by pre-emptively stimulating the motor representation of the articulators responsible for its pronunciation . Auditory and motor cortical coupling is restricted to a specific range of neuronal firing frequency. === Perception-action meshing === Evidence exists that perception and production are generally coupled in the motor system. This is supported by the existence of mirror neurons that are activated both by seeing (or hearing) an action and when that action is carried out. Another source of evidence is that for common coding theory between the representations used for perception and action. == Criticisms == The motor theory of speech perception is not widely held in the field of speech perception, though it is more popular in other fields, such as theoretical linguistics. As three of its advocates have noted, "it has few proponents within the field of speech perception, and many authors cite it primarily to offer critical commentary".p. 361 Several critiques of it exist. === Multiple sources === Speech perception is affected by nonproduction sources of information, such as context. Individual words are hard to understand in isolation but easy when heard in sentence context. It therefore seems that speech perception uses multiple sources that are integrated together in an optimal way. === Production === The motor theory of speech perception would predict that speech motor abilities in infants predict their speech perception abilities, but in actuality it is the other way around. It would also predict that defects in speech production would impair speech perception, but they do not. However, this only affects the first and already superseded behaviorist version of the theory, where infants were supposed to learn all production-perception patterns by imitation early in childhood. This is no longer the mainstream view of motor-speech theorists. === Speech module === Several sources of evidence for a specialized speech module have failed to be supported. Duplex perception can be observed with door slams. The McGurk effect can also be achieved with nonlinguistic stimuli, such as showing someone a video of a basketball bouncing but playing the sound of a ping-pong ball bouncing. As for categorical perception, listeners can be sensitive to acoustic differences within single phonetic categories. As a result, this part of the theory has been dropped by some researchers. === Sublexical tasks === The evidence provided for the motor theory of speech perception is limited to tasks such as syllable discrimination that use speech units not full spoken words or spoken sentences. As a result, "speech perception is sometimes interpreted as referring to the perception of speech at the sublexical level. However, the ultimate goal of these studies is presumably to understand the neural processes supporting the ability to process spee
Read more →
Environmental impact of AI

The environmental impact of the design, training, deployment and use of artificial intelligence includes the greenhouse gas emissions from generating electricity for data centres and computing hardware, operational and upstream water use, and material impacts from hardware manufacturing, mining and electronic waste. Estimating AI's environmental effects can be difficult because results depend on how impacts are measured, including whether accounting includes only model computation or also data-centre overhead, idle capacity, hardware manufacture, and local electricity supply. As these issues have received greater attention, governments and regulators have increasingly considered data-centre reporting requirements, energy-efficiency standards, and broader transparency measures for AI-related resource use. == Carbon footprint and energy use == AI-related energy use arises at multiple stages, including model training, fine-tuning, inference, storage, networking, and supporting infrastructure such as cooling and power conversion. === Individual level === Published estimates of energy use per AI request vary widely across models, tasks and measurement methods. A benchmark study presented at the 2024 ACM Conference on Fairness, Accountability, and Transparency found substantial differences between task types, with lower energy use for some text tasks and much higher energy use for image generation in the study's test conditions. In that benchmark, simple classification tasks consumed about 0.002–0.007 Wh per prompt on average (about 9% of a smartphone charge for 1,000 prompts), while text generation and text summarisation each used about 0.05 Wh per prompt; image generation averaged 2.91 Wh per prompt, and the least efficient image model in the study used 11.49 Wh per image (roughly equivalent to half a smartphone charge). First-party measurements in production environments have also been published. A 2025 Google study on Gemini assistant serving reported median per-prompt energy, emissions, and water-use estimates under the authors' accounting framework, while noting that different system boundaries can produce substantially different results. The study reported a median text-prompt estimate of about 0.24 Wh, which is roughly as much energy as watching nine seconds of television. The study also stated that software and infrastructure improvements reduced energy use by a factor of 33 and carbon emissions by a factor of 44 for a typical prompt over one year within the authors' framework. Researchers at the University of Michigan measured the energy consumption of various Meta Llama 3.1 models released in 2024 and found that smaller language models (8 billion parameters) use about 114 joules (0.03167 Wh) per response, while larger models (405 billion parameters) require up to 6,700 joules (1.861 Wh) per response. This corresponds to the energy needed to run a microwave oven for roughly one-tenth of a second and eight seconds, respectively. Comparisons between AI systems and human labour for specific tasks have produced mixed results and remain sensitive to assumptions about output quality, workload and system boundaries. A 2024 study in Scientific Reports reported 130 to 2900 times lower estimated carbon emissions for selected AI systems than for human writers and illustrators under its assumptions. A later Scientific Reports paper reported a counterexample for programming tasks under its assumptions, finding 5 to 19 times higher estimated emissions for the evaluated AI system than for human programmers on the benchmark used in that study. === System level === ==== Energy use and efficiency ==== AI electricity intensity depends not only on model architecture but also on hardware and facility efficiency. Data-centre operators commonly report Power usage effectiveness (PUE), which measures the ratio of total facility energy to IT equipment energy; a lower PUE indicates less overhead energy for cooling and other supporting infrastructure. Operators may also publish metrics and case studies on hardware efficiency, cooling systems and power sourcing. In its 2024 environmental report, Google stated that its 2023 total greenhouse gas emissions increased 13% year over year, primarily because of increased data-centre energy consumption and supply-chain emissions, while also reporting lower PUE than industry averages for its own facilities. The International Energy Agency has also reported that data centres remain a relatively small share of global electricity use overall, but that their local effects can be much more pronounced because demand is geographically concentrated. ==== Carbon footprint ==== At system level, AI contributes to rising electricity demand in data centres and related infrastructure. The International Energy Agency estimated that data centres used about 415 TWh of electricity in 2024, or around 1.5% of global electricity consumption, and projected that data-centre electricity use could rise to about 945 TWh by 2030, with AI identified as the main driver of that growth alongside other digital services. The carbon footprint of AI systems depends strongly on electricity sources, hardware efficiency, utilisation rates, and what stages are included in the accounting. Training large models can require substantial electricity, while total lifecycle impacts also depend on deployment scale and the amount of inference performed after training. Early analyses of frontier-model development reported rapid historical growth in training compute for selected systems, although later trends have depended on changes in model design, hardware and efficiency gains. Accounting methods that include upstream or embodied impacts, such as hardware manufacture and facilities construction, can materially affect estimates of AI-related emissions. === Decisions and strategies by individual companies === Large technology companies have reported that the expansion of AI and cloud infrastructure affects their sustainability targets, electricity demand, and resource use. Google, for example, attributed part of its emissions growth in 2023 to increased data-centre energy consumption and supply-chain emissions in its 2024 environmental report. Cloud and AI companies have also announced measures intended to reduce environmental impacts, including investment in more efficient hardware, low-carbon electricity procurement, alternative cooling systems, and water stewardship programmes. The extent, comparability, and third-party verification of such disclosures vary between firms and jurisdictions. == Water usage == Data centres can use water directly for cooling and indirectly through the water used in electricity generation, depending on the local energy mix. Public reporting on data-centre water use has often been inconsistent, making comparisons between operators and regions difficult. To standardise operational reporting, The Green Grid proposed the metric water usage effectiveness (WUE), defined as annual site water use divided by IT equipment energy use. WUE does not by itself measure local water stress, source sustainability, or all upstream water impacts. Studies of AI water use also distinguish between water withdrawal and water consumption. Research on AI-specific water use has argued that the water footprint of AI systems can be difficult to observe and may vary substantially by location, cooling design, and electricity source. A 2025 Communications of the ACM article summarised methods for estimating AI water footprints and emphasised the distinction between water withdrawal and water consumption. Li and colleagues estimated that global AI water withdrawal could reach 4.2–6.6 billion cubic metres in 2027 under the scenarios examined in their article. Using GPT-3, released by OpenAI in 2020, as an example, they estimated that training the model in Microsoft's U.S. data centres could consume about 700,000 litres of onsite water and about 5.4 million litres in total when offsite electricity-related water use was included; they also estimated that 10–50 medium-length GPT-3 responses could consume about 500 mL of water, depending on when and where the model was deployed. Published prompt-level estimates have also varied by system and accounting framework: the 2025 Google study on Gemini assistant serving reported a median text-prompt estimate of about 0.26 mL under its framework. Location can materially affect the significance of data-centre water use. Research on U.S. data centres found that one-fifth of servers' direct water footprint came from moderately to highly water-stressed watersheds, while nearly half of servers were fully or partially powered by plants located in water-stressed regions. A 2025 Reuters report, citing data from Verisk Maplecroft and NatureFinance, said that an average mid-sized data centre uses about 1.4 million litres of water per day for cooling and that Phoenix would experience a 32% increase in annual water stress if currently pl
Read more →
Augment (app)

Augment is an augmented reality SaaS platform that allows users to visualize their products in 3D in real environment and in real-time through tablets or smartphones. The software can be used for retail, e-commerce, architecture, and other purposes. Augment created a mobile app of the same name, used to visualize 3D models in augmented reality and a web application called Augment Manager for 3D content management. The company is based in Paris, France, and was founded in October 2011 by Jean-François Chianetta, Cyril Champier, and Mickaël Jordan. In March 2016, Augment announced €3 million in its series-A round from Salesforce Ventures, which bringing the total funding since launch to $4.7 million. Augment lets businesses and 3D professionals visualize projects in their actual size and environment, on iPhone, iPad, and Android, using the power of augmented reality. Users can print the Augment tracker or create their own tracker to place the 3D models in space and at scale in real time. Common uses of the technology include product presentations, interactive print campaigns and e-Commerce product visualization. Augment has just released its augmented reality SDK solutions for retail and augmented commerce. The SDK solutions, available for both native mobile app and web integrations, allow companies to embed augmented reality product visualization in their existing eCommerce platforms. == Technology == Augment uses the following 3D technologies: Vuforia Augmented Reality SDK OpenGL == Customer cases == Companies such as Coca-Cola, Siemens, Nokia, Nestle, and Boeing are using Augment's solutions. == History == Augment was first created by Jean-François Chianetta in October 2011. Chianetta later teamed up with Cyril Champier and Mickaël Jordan for further development. The co-founding team was among the 12 startups of Season 3 of French accelerator Le Camping. The team raised one million euros (US$1,300,000) in April 2013 and moved its office to Paris. In March 2016, Augment raised US$3M Series A funding from Salesforce and other investors. In 2013, Augment's first service, Boost Business Catalog, was made available to help businesses catalogue and display their product models. Customers can rotate the images in 3D and view augmented content before deciding what to buy. == Awards == "Best Innovation" at Ecommerce Mag Trophy 2013
Read more →
Fling (social network)

Fling was a social media app available for IOS and Android. It was founded in 2014 by Marco Nardone and was taken offline in August 2016. == Overview == In 2012, Marco Nardone founded the startup Unii and launched Unii.com, a social network intended for students in the UK. While working on this service, Nardone had the idea for a messaging service where pictures could be sent to strangers in January 2014. The app Fling was then developed and released between March and July 2014. After a month, it already had 375,000 downloads and 180,000 active users on iOS. Users were able to take pictures inside the app and send them to 50 random people all over the world. The recipient could then choose to answer via chat or reply by sending a picture themselves. The app was used by many users as a medium to exchange sexually explicit pictures and for sexting with strangers. This led to the app being removed from the App Store in June 2015. In the 19 days that followed, flings developers rewrote the App almost completely from scratch, working around the clock. The feature to message random strangers was removed, and the app was readmitted into the App Store as a messenger App resembling Snapchat. But the redesigned Application did not have the success of its predecessor. The funding ran out and the parent company Unii went bankrupt. The company was not able to pay their content moderation team anymore, leading to a new surge of pornographic content on the App. Shortly after that, the Social Network was taken offline in August 2016. It has been inactive since. During the 2 years Fling was online, $21 million was raised from investors while generating no revenue at all. Of this $21 million (£16.5m), £5 million came from Nardone's father. == Allegations against CEO == Former employees made multiple allegations against Marco Nardone, the Founder and CEO of Unii and Fling. According to these claims, he behaved erratic and abusive, throwing "things across the office". He hired his girlfriend as the head of human resources to handle issues between him and his staff. Employees who left the company often had "some part of their pay held back". According to the reports, he also spent the money raised from investors irresponsibly, having no clear concept of a budget. Some of that money was used on expensive restaurants in London, a luxurious office for CEO Nardone and advertisements for Fling on Twitter and Facebook. Nardone also spent time partying in Ibiza with two employees, while the developer team in London frantically tried to get Fling back online after it being removed from the App Store. In December 2017 he pleaded guilty to assaulting his girlfriend at a domestic violence court.
Read more →
Photoanalysis

Photoanalysis (or photo analysis) refers to the study of pictures to compile various types of data, for example, to measure the size distribution of virtually anything that can be captured by photo. Photoanalysis technology has changed the way mines and mills quantify fragmented material. Images are an effective way to document conditions before, after, and even during blasting activities. The technology is advancing at a high rate, and lenses, storage media memory, light sensitivity and resolution have been improving steadily. Today's digital cameras and camcorders include high-resolution optics, compact size, automatic time and date stamps, good battery life, shutters to freeze motion, and computers to autofocus and eliminate jitter using image stabilization. == Mining == Photoanalysis in mining operations can provide an automated system that forewarns a company of potential problems with materials, leading to economies and reduced damage caused from over-sized materials. It can also help determine the effectiveness of blasts. A company can use this technology to monitor materials moving on a conveyor belt in an underground environment, to measure piles left over from a blast, and even measure the amount of material being carried by dump trucks or vessels to a destination. Photoanalysis is being used on SAG mills worldwide to control the size of rock being crushed. Companies are using this technology to determine the size of particles being processed in the SAG Mill.[1] Archived 2009-05-23 at the Wayback Machine Having oversize material entering the SAG mill makes an operation less efficient, costing companies money in electrical and maintenance costs. Photoanalysis technology can eliminate unwanted material before it enters the mill, keeping rock crushing costs low. == Forestry == Wood chip size can affect the overall quality of a product. With automated photoanalysis systems, companies can remove any unwanted wrong-size particles without stopping their mill process. Photoanalysis can affect how efficiently forestry companies operate. In mills worldwide, photoanalysis technology is improving the use of lumber products, cutting back on the amount of trees being used to operate, and saving companies money through quality control optimization.[2] With the current downturn in the North American forestry industry, operators are looking at making their mills more efficient and effective when processing materials. Photoanalysis technology helps identify any weaknesses in the process by continuously monitoring different sections of an operation. == Agriculture == Agricultural companies can, using photoanalysis, monitor conveyor belts of food without contaminating the product by touching it. Other benefits of photoanalysis systems include: Automated removal of any unwanted material on food conveyor Improved quality control for the most important parts of the agricultural process Pinpoint accuracy that helps the efficiency and effectiveness of product handling techniques The importance of photoanalysis technology is being noticed by the agricultural industry as it identifies any unwanted materials going through the process. In an example, if a mouse is on a conveyor of corn, photoanalysis technology would be able to identify the unwanted object and remove it before it contaminates the whole process. == Origins of photoanalysis technology == Photoanalysis technology was created by using the Waterloo Image Enhancement Process in the 1980s. After further development of the imaging process with explosives producer DuPont, engineers Tom Palangio and Takis Katsabanis began selling photoanalysis software commercially. They later renamed the process WipFrag, standing for Waterloo Image Process Fragmentation Today, photoanalysis technology has evolved into stabilized and portable systems that can automatically capture and analyze results instantly. Thousands of these products are currently being used around the world to measure fragmented material. == Photoanalysis equipment photos == == Fragmentation analysis == Fragmentation analysis is becoming a popular term in mining, agricultural and forestry industries. With the majority of money in these industries directed towards the proper sizing of materials, companies are using fragmentation analysis to determine various factors within an operation.[3] The two main ways a company keeps track of fragmented material are through manual and automated sieving procedures. Manual sieving involves extracting a sample of material to analyze the size distribution. The results can be tabulated within two days. Automated sieving is an advanced way of sieving materials running through a process. Without having to extract the material, photoanalysis can take place, allowing for immediate results with pinpoint accuracy. == Blast Fragmentation Software == Operators are using fragmentation analysis to determine the effectiveness of various blasts. With automated sieving technology, workers can track the success of these blasts and receive instant results. Companies are using these results to determine what blasting method yielded the best results for their specific operation. The common variables associated with blast optimization are the provided Particle Size Distribution (PSD) from a shovel fragmentation system, geology including rock type and fracturing, and energy factor. By using photoanalysis the fragmented materials can be monitored, offering pinpoint accuracy and allowing mine operators to make adjustments to future blasting procedures. See Optical Granulometry to view the automated sieving process. == Pre-crushing analysis == Maintenance costs can be significantly reduced if an operation focuses on the fragmentation of the particles passing through their process. Automated sieving systems can detect and help remove any oversize material before it enters the crusher and causes maintenance problems. It also helps determine the effectiveness of the mining process prior to crushing; the sizing of material is always a critical part of operations in the mining, forestry and agricultural industries. Having an analysis taking place at every major point in an operation allows for the proper tracking of material being processed. Engineers can then determine what part of the process needs improving based solely on the size of material. == Post-crushing analysis == Measuring how effective industrial crushers are, can help save a company millions of dollars in energy costs on an annual basis. There are two components that affect a typical crusher: the size of the material inputted, and the speed at which the crusher is moving. If the user can find a perfect balance between these two components, the materials will be crushed to the right size in the shortest time possible. Meeting the material standards set by governments and large companies can be hard. Having a post-crushing analysis taking place ensures that no oversize material gets shipped; eliminating the chance of getting fined for not meeting industry specifications.
Read more →
Vx-underground

vx-underground, also known as VXUG, is an educational website about malware and cybersecurity. It claims to have the largest online repository of malware. The site was launched in May, 2019 and has grown to host over 35 million pieces of malware samples. On their account on Twitter, VXUG reports on and verifies cybersecurity breaches. == Reception == Kim Crawley compared the site to VirusTotal and states that vx-underground is more susceptible to suspicion for law enforcement. == Data breach reports == In May 2024, the International Baccalaureate organizations faced allegations over supposed breaches in their IT infrastructure after an incident of examination leaks. Upon inspecting leaked data, VXUG were the first to report that the breach seemed legitimate on the morning of May 6.
Read more →
Pixel aspect ratio

A pixel aspect ratio (PAR) is a mathematical ratio that describes how the width of a pixel in a digital image compares to the height of that pixel. Most digital imaging systems display an image as a grid of tiny, square pixels. However, some imaging systems, especially those that must be compatible with standard-definition television motion pictures, display an image as a grid of rectangular pixels, in which the pixel width and height are different. Pixel aspect ratio describes this difference. Use of pixel aspect ratio mostly involves pictures pertaining to standard-definition television and some other exceptional cases. Most other imaging systems, including those that comply with SMPTE standards and practices, use square pixels. PAR is also known as sample aspect ratio and abbreviated SAR, though it can be confused with storage aspect ratio. == Introduction == The ratio of the width to the height of an image is known as the aspect ratio, or more precisely the display aspect ratio (DAR) – the aspect ratio of the image as displayed; for TV, DAR was traditionally 4:3 (a.k.a. fullscreen), with 16:9 (a.k.a. widescreen) now the standard for HDTV. In digital images, there is a distinction with the storage aspect ratio (SAR), which is the ratio of pixel dimensions. If an image is displayed with square pixels, then these ratios agree; if not, then non-square, "rectangular" pixels are used, and these ratios disagree. The aspect ratio of the pixels themselves is known as the pixel aspect ratio (PAR) – for square pixels this is 1:1 – and these are related by the identity: Rearranging (solving for PAR) yields: For example: A 640 × 480 VGA image has a SAR of 640/480 = 4:3, and if displayed on a 4:3 display (DAR = 4:3) has square pixels, hence a PAR of 1:1. By contrast, a 720 × 576 D-1 PAL image has a SAR of 720/576 = 5:4, but if displayed on a 4:3 display (DAR = 4:3) the PAR is 4/3 : 5/4 = 16:15 ≈ 1.066. This means that the pixels of the PAL picture must be "stretched" by this amount to fit in the 4:3 display. In analog images such as film there is no notion of pixel, nor notion of SAR or PAR, but in the digitization of analog images the resulting digital image has pixels, hence SAR (and accordingly PAR, if displayed at the same aspect ratio as the original). Non-square pixels arise often in early digital TV standards, related to digitalization of analog TV signals – whose vertical and "effective" horizontal resolutions differ and are thus best described by non-square pixels – and also in some digital video cameras and computer display modes, such as Color Graphics Adapter (CGA). Today they arise also in transcoding between resolutions with different SARs. Actual displays do not generally have non-square pixels, though digital sensors might; they are rather a mathematical abstraction used in resampling images to convert between resolutions. There are several complicating factors in understanding PAR, particularly as it pertains to digitization of analog video: First, analog video does not have pixels, but rather a raster scan, and thus has a well-defined vertical resolution (the lines of the raster), but not a well-defined horizontal resolution, since each line is an analog signal. However, by a standardized sampling rate, the effective horizontal resolution can be determined by the sampling theorem, as is done below. Second, due to overscan, some of the lines at the top and bottom of the raster are not visible, as are some of the possible image on the left and right – see Overscan: Analog to digital resolution issues. Also, the resolution may be rounded (DV NTSC uses 480 lines, rather than the 486 that are possible). Third, analog video signals are interlaced – each image (frame) is sent as two "fields", each with half the lines. Thus either the pixels are twice as tall as they would be without interlacing, or the image is deinterlaced. == Background == Video is presented as a sequential series of images called video frames. Historically, video frames were created and recorded in analog form. As digital display technology, digital broadcast technology, and digital video compression evolved separately, it resulted in video frame differences that must be addressed using pixel aspect ratio. Digital video frames are generally defined as a grid of pixels used to present each sequential image. The horizontal component is defined by pixels (or samples), and is known as a video line. The vertical component is defined by the number of lines, as in 480 lines. Standard-definition television standards and practices were developed as broadcast technologies and intended for terrestrial broadcasting, and were therefore not designed for digital video presentation. Such standards define an image as an array of well-defined horizontal "Lines", well-defined vertical "Line Duration" and a well-defined picture center. However, there is not a standard-definition television standard that properly defines image edges or explicitly demands a certain number of picture elements per line. Furthermore, analog video systems such as NTSC 480i and PAL 576i, instead of employing progressively displayed frames, employ fields or interlaced half-frames displayed in an interwoven manner to reduce flicker and double the image rate for smoother motion. === Analog-to-digital conversion === As a result of computers becoming powerful enough to serve as video editing tools, video digital-to-analog converters and analog-to-digital converters were made to overcome this incompatibility. To convert analog video lines into a series of square pixels, the industry adopted a default sampling rate at which luma values were extracted into pixels. The luma sampling rate for 480i pictures was 12+3⁄11 MHz and for 576i pictures was 14+3⁄4 MHz. The term pixel aspect ratio was first coined when ITU-R BT.601 (commonly known as Rec. 601) specified that standard-definition television pictures are made of lines of exactly 720 non-square pixels. ITU-R BT.601 did not define the exact pixel aspect ratio but did provide enough information to calculate the exact pixel aspect ratio based on industry practices: The standard luma sampling rate of precisely 13+1⁄2 MHz. Based on this information: The pixel aspect ratio for 480i would be 10:11 as: 12 3 11 ÷ 13 1 2 = 10 11 {\displaystyle 12{\tfrac {3}{11}}\div 13{\tfrac {1}{2}}={\tfrac {10}{11}}} The pixel aspect ratio for 576i would be 59:54 as: 14 3 4 ÷ 13 1 2 = 59 54 {\displaystyle 14{\tfrac {3}{4}}\div 13{\tfrac {1}{2}}={\tfrac {59}{54}}} SMPTE RP 187 further attempted to standardize the pixel aspect ratio values for 480i and 576i. It designated 177:160 for 480i or 1035:1132 for 576i. However, due to significant difference with practices in effect by industry and the computational load that they imposed upon the involved hardware, SMPTE RP 187 was simply ignored. SMPTE RP 187 information annex A.4 further suggested the use of 10:11 for 480i. As of this writing, ITU-R BT.601-6, which is the latest edition of ITU-R BT.601, still implies that the pixel aspect ratios mentioned above are correct. === Digital video processing === As stated above, ITU-R BT.601 specified that standard-definition television pictures are made of lines of 720 non-square pixels, sampled with a precisely specified sampling rate. A simple mathematical calculation reveals that a 704 pixel width would be enough to contain a 480i or 576i standard 4:3 picture: A 4:3 480-line picture, digitized with the Rec. 601-recommended sampling rate, would be 704 non-square pixels wide. x 480 × 10 11 = 4 3 ⇒ x = 480 × 11 × 4 10 × 3 = 704 {\displaystyle {\frac {x}{480}}\times {\frac {10}{11}}={\frac {4}{3}}\Rightarrow x={\frac {480\times 11\times 4}{10\times 3}}=704} A 4:3 576-line picture, digitized with the Rec. 601-recommended sampling rate, would be 702+54⁄59 non-square pixels wide. x 576 × 59 54 = 4 3 ⇒ x = 576 × 54 × 4 59 × 3 = 702 54 59 {\displaystyle {\frac {x}{576}}\times {\frac {59}{54}}={\frac {4}{3}}\Rightarrow x={\frac {576\times 54\times 4}{59\times 3}}=702{\tfrac {54}{59}}} Unfortunately, not all standard TV pictures are exactly 4:3: As mentioned earlier, in analog video, the center of a picture is well-defined but the edges of the picture are not standardized. As a result, some analog devices (mostly PAL devices but also some NTSC devices) generated motion pictures that were horizontally (slightly) wider. This also proportionately applies to anamorphic widescreen (16:9) pictures. Therefore, to maintain a safe margin of error, ITU-R BT.601 required sampling 16 more non-square pixels per line (8 more at each edge) to ensure saving all video data near the margins. This requirement, however, had implications for PAL motion pictures. PAL pixel aspect ratios for standard (4:3) and anamorphic wide screen (16:9), respectively 59:54 and 118:81, were awkward for digital image processing, especially for mixing PAL and NTSC video clips. Therefore, video editing products chose the almost equivalent value
Read more →
Motor theory of speech perception

The motor theory of speech perception is the hypothesis that people perceive spoken words by identifying the vocal tract gestures with which they are pronounced rather than by identifying the sound patterns that speech generates. It originally claimed that speech perception is done through a specialized module that is innate and human-specific. Though the idea of a module has been qualified in more recent versions of the theory, the idea remains that the role of the speech motor system is not only to produce speech articulations but also to detect them. The hypothesis has gained more interest outside the field of speech perception than inside. This has increased particularly since the discovery of mirror neurons that link the production and perception of motor movements, including those made by the vocal tract. The theory was initially proposed in the Haskins Laboratories in the 1950s by Alvin Liberman and Franklin S. Cooper, and developed further by Donald Shankweiler, Michael Studdert-Kennedy, Ignatius Mattingly, Carol Fowler and Douglas Whalen. == Origins and development == The hypothesis has its origins in research using pattern playback to create reading machines for the blind that would substitute sounds for orthographic letters. This led to a close examination of how spoken sounds correspond to the acoustic spectrogram of them as a sequence of auditory sounds. This found that successive consonants and vowels overlap in time with one another (a phenomenon known as coarticulation). This suggested that speech is not heard like an acoustic "alphabet" or "cipher," but as a "code" of overlapping speech gestures. === Associationist approach === Initially, the theory was associationist: infants mimic the speech they hear and that this leads to behavioristic associations between articulation and its sensory consequences. Later, this overt mimicry would be short-circuited and become speech perception. This aspect of the theory was dropped, however, with the discovery that prelinguistic infants could already detect most of the phonetic contrasts used to separate different speech sounds. === Cognitivist approach === The behavioristic approach was replaced by a cognitivist one in which there was a speech module. The module detected speech in terms of hidden distal objects rather than at the proximal or immediate level of their input. The evidence for this was the research finding that speech processing was special such as duplex perception. === Changing distal objects === Initially, speech perception was assumed to link to speech objects that were both the invariant movements of speech articulators the invariant motor commands sent to muscles to move the vocal tract articulators This was later revised to include the phonetic gestures rather than motor commands, and then the gestures intended by the speaker at a prevocal, linguistic level, rather than actual movements. === Modern revision === The "speech is special" claim has been dropped, as it was found that speech perception could occur for nonspeech sounds (for example, slamming doors for duplex perception). === Mirror neurons === The discovery of mirror neurons has led to renewed interest in the motor theory of speech perception, and the theory still has its advocates, although there are also critics. == Support == === Nonauditory gesture information === If speech is identified in terms of how it is physically made, then nonauditory information should be incorporated into speech percepts even if it is still subjectively heard as "sounds". This is, in fact, the case. The McGurk effect shows that seeing the production of a spoken syllable that differs from an auditory cue synchronized with it affects the perception of the auditory one. In other words, if someone hears "ba" but sees a video of someone pronouncing "ga", what they hear is different—some people believe they hear "da". People find it easier to hear speech in noise if they can see the speaker. People can hear syllables better when their production can be felt haptically. === Categorical perception === Using a speech synthesizer, speech sounds can be varied in place of articulation along a continuum from /bɑ/ to /dɑ/ to /ɡɑ/, or in voice onset time on a continuum from /dɑ/ to /tɑ/ (for example). When listeners are asked to discriminate between two different sounds, they perceive sounds as belonging to discrete categories, even though the sounds vary continuously. In other words, 10 sounds (with the sound on one extreme being /dɑ/ and the sound on the other extreme being /tɑ/, and the ones in the middle varying on a scale) may all be acoustically different from one another, but the listener will hear all of them as either /dɑ/ or /tɑ/. Likewise, the English consonant /d/ may vary in its acoustic details across different phonetic contexts (the /d/ in /du/ does not technically sound the same as the one in /di/, for example), but all /d/'s as perceived by a listener fall within one category (voiced alveolar plosive) and that is because "linguistic representations are abstract, canonical, phonetic segments or the gestures that underlie these segments." This suggests that humans identify speech using categorical perception, and thus that a specialized module, such as that proposed by the motor theory of speech perception, may be on the right track. === Speech imitation === If people can hear the gestures in speech, then the imitation of speech should be very fast, as in when words are repeated that are heard in headphones as in speech shadowing. People can repeat heard syllables more quickly than they would be able to produce them normally. === Speech production === Hearing speech activates vocal tract muscles, and the motor cortex and premotor cortex. The integration of auditory and visual input in speech perception also involves such areas. Disrupting the premotor cortex disrupts the perception of speech units such as plosives. The activation of the motor areas occurs in terms of the phonemic features which link with the vocal track articulators that create speech gestures. The perception of a speech sound is aided by pre-emptively stimulating the motor representation of the articulators responsible for its pronunciation . Auditory and motor cortical coupling is restricted to a specific range of neuronal firing frequency. === Perception-action meshing === Evidence exists that perception and production are generally coupled in the motor system. This is supported by the existence of mirror neurons that are activated both by seeing (or hearing) an action and when that action is carried out. Another source of evidence is that for common coding theory between the representations used for perception and action. == Criticisms == The motor theory of speech perception is not widely held in the field of speech perception, though it is more popular in other fields, such as theoretical linguistics. As three of its advocates have noted, "it has few proponents within the field of speech perception, and many authors cite it primarily to offer critical commentary".p. 361 Several critiques of it exist. === Multiple sources === Speech perception is affected by nonproduction sources of information, such as context. Individual words are hard to understand in isolation but easy when heard in sentence context. It therefore seems that speech perception uses multiple sources that are integrated together in an optimal way. === Production === The motor theory of speech perception would predict that speech motor abilities in infants predict their speech perception abilities, but in actuality it is the other way around. It would also predict that defects in speech production would impair speech perception, but they do not. However, this only affects the first and already superseded behaviorist version of the theory, where infants were supposed to learn all production-perception patterns by imitation early in childhood. This is no longer the mainstream view of motor-speech theorists. === Speech module === Several sources of evidence for a specialized speech module have failed to be supported. Duplex perception can be observed with door slams. The McGurk effect can also be achieved with nonlinguistic stimuli, such as showing someone a video of a basketball bouncing but playing the sound of a ping-pong ball bouncing. As for categorical perception, listeners can be sensitive to acoustic differences within single phonetic categories. As a result, this part of the theory has been dropped by some researchers. === Sublexical tasks === The evidence provided for the motor theory of speech perception is limited to tasks such as syllable discrimination that use speech units not full spoken words or spoken sentences. As a result, "speech perception is sometimes interpreted as referring to the perception of speech at the sublexical level. However, the ultimate goal of these studies is presumably to understand the neural processes supporting the ability to process spee
Read more →