AI Headshot Corporate Free

AI Headshot Corporate Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Winner-take-all in action selection

  Winner-take-all is a computer science concept that has been widely applied in behavior-based robotics as a method of action selection for intelligent agents. Winner-take-all systems work by connecting modules (task-designated areas) in such a way that when one action is performed it stops all other actions from being performed, so only one action is occurring at a time. The name comes from the idea that the "winner" action takes all of the motor system's power. == History == In the 1980s and 1990s, many roboticists and cognitive scientists were attempting to find speedier and more efficient alternatives to the traditional world modeling method of action selection. In 1982, Jerome A. Feldman and D.H. Ballard published the "Connectionist Models and Their Properties", referencing and explaining winner-take-all as a method of action selection. Feldman's architecture functioned on the simple rule that in a network of interconnected action modules, each module will set its own output to zero if it reads a higher input than its own in any other module. In 1986, Rodney Brooks introduced behavior-based artificial intelligence. Winner-take-all architectures for action selection soon became a common feature of behavior-based robots, because selection occurred at the level of the action modules (bottom-up) rather than at a separate cognitive level (top-down), producing a tight coupling of stimulus and reaction. == Types of winner-take-all architectures == === Hierarchy === In the hierarchical architecture, actions or behaviors are programmed in a high-to-low priority list, with inhibitory connections between all the action modules. The agent performs low-priority behaviors until a higher-priority behavior is stimulated, at which point the higher behavior inhibits all other behaviors and takes over the motor system completely. Prioritized behaviors are usually key to the immediate survival of the agent, while behaviors of lower priority are less time-sensitive. For example, "run away from predator" would be ranked above "sleep." While this architecture allows for clear programming of goals, many roboticists have moved away from the hierarchy because of its inflexibility. === Heterarchy and fully distributed === In the heterarchy and fully distributed architecture, each behavior has a set of pre-conditions to be met before it can be performed, and a set of post-conditions that will be true after the action has been performed. These pre- and post-conditions determine the order in which behaviors must be performed and are used to causally connect action modules. This enables each module to receive input from other modules as well as from the sensors, so modules can recruit each other. For example, if the agent's goal were to reduce thirst, the behavior "drink" would require the pre-condition of having water available, so the module would activate the module in charge of "find water". The activations organize the behaviors into a sequence, even though only one action is performed at a time. The distribution of larger behaviors across modules makes this system flexible and robust to noise. Some critics of this model hold that any existing set of division rules for the predecessor and conflictor connections between modules produce sub-par action selection. In addition, the feedback loop used in the model can in some circumstances lead to improper action selection. === Arbiter and centrally coordinated === In the arbiter and centrally coordinated architecture, the action modules are not connected to each other but to a central arbiter. When behaviors are triggered, they begin "voting" by sending signals to the arbiter, and the behavior with the highest number of votes is selected. In these systems, bias is created through the "voting weight", or how often a module is allowed to vote. Some arbiter systems take a different spin on this type of winner-take-all by using a "compromise" feature in the arbiter. Each module is able to vote for or against each smaller action in a set of actions, and the arbiter selects the action with the most votes, meaning that it benefits the most behavior modules. This can be seen as violating the general rule against creating representations of the world in behavior-based AI, established by Brooks. By performing command fusion, the system is creating a larger composite pool of knowledge than is obtained from the sensors alone, forming a composite inner representation of the environment. Defenders of these systems argue that forbidding world-modeling puts unnecessary constraints on behavior-based robotics, and that agents benefits from forming representations and can still remain reactive.

  Read more →
• 

  Stochastic block model

  The stochastic block model is a generative model for random graphs. This model tends to produce graphs containing communities, subsets of nodes characterized by being connected with one another with particular edge densities. For example, edges may be more common within communities than between communities. Its mathematical formulation was first introduced in 1983 in the field of social network analysis by Paul W. Holland et al. The stochastic block model is important in statistics, machine learning, and network science, where it serves as a useful benchmark for the task of recovering community structure in graph data. == Definition == The stochastic block model takes the following parameters: The number n {\displaystyle n} of vertices; a partition of the vertex set { 1 , … , n } {\displaystyle \{1,\ldots ,n\}} into disjoint subsets C 1 , … , C r {\displaystyle C_{1},\ldots ,C_{r}} , called communities; a symmetric r × r {\displaystyle r\times r} matrix P {\displaystyle P} of edge probabilities. The edge set is then sampled at random as follows: any two vertices u ∈ C i {\displaystyle u\in C_{i}} and v ∈ C j {\displaystyle v\in C_{j}} are connected by an edge with probability P i j {\displaystyle P_{ij}} . An example problem is: given a graph with n {\displaystyle n} vertices, where the edges are sampled as described, recover the groups C 1 , … , C r {\displaystyle C_{1},\ldots ,C_{r}} . == Special cases == If the probability matrix is a constant, in the sense that P i j = p {\displaystyle P_{ij}=p} for all i , j {\displaystyle i,j} , then the result is the Erdős–Rényi model G ( n , p ) {\displaystyle G(n,p)} . This case is degenerate—the partition into communities becomes irrelevant—but it illustrates a close relationship to the Erdős–Rényi model. The planted partition model is the special case that the values of the probability matrix P {\displaystyle P} are a constant p {\displaystyle p} on the diagonal and another constant q {\displaystyle q} off the diagonal. Thus two vertices within the same community share an edge with probability p {\displaystyle p} , while two vertices in different communities share an edge with probability q {\displaystyle q} . Sometimes it is this restricted model that is called the stochastic block model. The case where p > q {\displaystyle p>q} is called an assortative model, while the case p < q {\displaystyle p P j k {\displaystyle P_{ii}>P_{jk}} whenever j ≠ k {\displaystyle j\neq k} : all diagonal entries dominate all off-diagonal entries. A model is called weakly assortative if P i i > P i j {\displaystyle P_{ii}>P_{ij}} whenever i ≠ j {\displaystyle i\neq j} : each diagonal entry is only required to dominate the rest of its own row and column. Disassortative forms of this terminology exist, by reversing all inequalities. For some algorithms, recovery might be easier for block models with assortative or disassortative conditions of this form. == Typical statistical tasks == Much of the literature on algorithmic community detection addresses three statistical tasks: detection, partial recovery, and exact recovery. === Detection === The goal of detection algorithms is simply to determine, given a sampled graph, whether the graph has latent community structure. More precisely, a graph might be generated, with some known prior probability, from a known stochastic block model, and otherwise from a similar Erdos-Renyi model. The algorithmic task is to correctly identify which of these two underlying models generated the graph. === Partial recovery === In partial recovery, the goal is to approximately determine the latent partition into communities, in the sense of finding a partition that is correlated with the true partition significantly better than a random guess. === Exact recovery === In exact recovery, the goal is to recover the latent partition into communities exactly. The community sizes and probability matrix may be known or unknown. == Statistical lower bounds and threshold behavior == Stochastic block models exhibit a sharp threshold effect reminiscent of percolation thresholds. Suppose that we allow the size n {\displaystyle n} of the graph to grow, keeping the community sizes in fixed proportions. If the probability matrix remains fixed, tasks such as partial and exact recovery become feasible for all non-degenerate parameter settings. However, if we scale down the probability matrix at a suitable rate as n {\displaystyle n} increases, we observe a sharp phase transition: for certain settings of the parameters, it will become possible to achieve recovery with probability tending to 1, whereas on the opposite side of the parameter threshold, the probability of recovery tends to 0 no matter what algorithm is used. For partial recovery, the appropriate scaling is to take P i j = P ~ i j / n {\displaystyle P_{ij}={\tilde {P}}_{ij}/n} for fixed P ~ {\displaystyle {\tilde {P}}} , resulting in graphs of constant average degree. In the case of two equal-sized communities, in the assortative planted partition model with probability matrix P = ( p ~ / n q ~ / n q ~ / n p ~ / n ) , {\displaystyle P=\left({\begin{array}{cc}{\tilde {p}}/n&{\tilde {q}}/n\\{\tilde {q}}/n&{\tilde {p}}/n\end{array}}\right),} partial recovery is feasible with probability 1 − o ( 1 ) {\displaystyle 1-o(1)} whenever ( p ~ − q ~ ) 2 > 2 ( p ~ + q ~ ) {\displaystyle ({\tilde {p}}-{\tilde {q}})^{2}>2({\tilde {p}}+{\tilde {q}})} , whereas any estimator fails partial recovery with probability 1 − o ( 1 ) {\displaystyle 1-o(1)} whenever ( p ~ − q ~ ) 2 < 2 ( p ~ + q ~ ) {\displaystyle ({\tilde {p}}-{\tilde {q}})^{2}<2({\tilde {p}}+{\tilde {q}})} . For exact recovery, the appropriate scaling is to take P i j = P ~ i j log ⁡ n / n {\displaystyle P_{ij}={\tilde {P}}_{ij}\log n/n} , resulting in graphs of logarithmic average degree. Here a similar threshold exists: for the assortative planted partition model with r {\displaystyle r} equal-sized communities, the threshold lies at p ~ − q ~ = r {\displaystyle {\sqrt {\tilde {p}}}-{\sqrt {\tilde {q}}}={\sqrt {r}}} . In fact, the exact recovery threshold is known for the fully general stochastic block model. == Algorithms == In principle, exact recovery can be solved in its feasible range using maximum likelihood, but this amounts to solving a constrained or regularized cut problem such as minimum bisection that is typically NP-complete. Hence, no known efficient algorithms will correctly compute the maximum-likelihood estimate in the worst case. However, a wide variety of algorithms perform well in the average case, and many high-probability performance guarantees have been proven for algorithms in both the partial and exact recovery settings. Successful algorithms include spectral clustering of the vertices, semidefinite programming, forms of belief propagation, and community detection among others. == Variants == Several variants of the model exist. One minor tweak allocates vertices to communities randomly, according to a categorical distribution, rather than in a fixed partition. More significant variants include the degree-corrected stochastic block model, the hierarchical stochastic block model, the geometric block model, censored block model and the mixed-membership block model. == Topic models == Stochastic block model have been recognised to be a topic model on bipartite networks. In a network of documents and words, Stochastic block model can identify topics: group of words with a similar meaning. == Extensions to signed graphs == Signed graphs allow for both favorable and adverse relationships and serve as a common model choice for various data analysis applications, e.g., correlation clustering. The stochastic block model can be trivially extended to signed graphs by assigning both positive and negative edge weights or equivalently using a difference of adjacency matrices of two stochastic block models. == DARPA/MIT/AWS Graph Challenge: streaming stochastic block partition == GraphChallenge encourages community approaches to developing new solutions for analyzing graphs and sparse data derived from social media, sensor feeds, and scientific data to enable relationships between events to be discovered as they unfold in the field. Streaming stochastic block partition is one of the challenges since 2017. Spectral clustering has demonstrated outstanding performance compared to the original and even improved base algorithm, matching its quality of clusters while being multiple orders of magnitude faster.

  Read more →
• 

  Differential evolution

  Differential evolution (DE) is an evolutionary algorithm to optimize a problem by iteratively trying to improve a candidate solution with regard to a given measure of quality. Such methods are commonly known as metaheuristics as they make few or no assumptions about the optimized problem and can search very large spaces of candidate solutions. However, metaheuristics such as DE do not guarantee an optimal solution is ever found. DE is used for multidimensional real-valued functions but does not use the gradient of the problem being optimized, which means DE does not require the optimization problem to be differentiable, as is required by classic optimization methods such as gradient descent and quasi-newton methods. DE can therefore also be used on optimization problems that are not even continuous, are noisy, change over time, etc. DE optimizes a problem by maintaining a population of candidate solutions and creating new candidate solutions by combining existing ones according to its simple formulae, and then keeping whichever candidate solution has the best score or fitness on the optimization problem at hand. In this way, the optimization problem is treated as a black box that merely provides a measure of quality given a candidate solution and the gradient is therefore not needed. == History == Storn and Price introduced Differential Evolution in 1995. Books have been published on theoretical and practical aspects of using DE in parallel computing, multiobjective optimization, constrained optimization, and the books also contain surveys of application areas. Surveys on the multi-faceted research aspects of DE can be found in journal articles. == Algorithm == A basic variant of the DE algorithm works by having a population of candidate solutions (called agents). These agents are moved around in the search-space by using simple mathematical formulae to combine the positions of existing agents from the population. If the new position of an agent is an improvement then it is accepted and forms part of the population, otherwise the new position is simply discarded. The process is repeated and by doing so it is hoped, but not guaranteed, that a satisfactory solution will eventually be discovered. Formally, let f : R n → R {\displaystyle f:\mathbb {R} ^{n}\to \mathbb {R} } be the fitness function which must be minimized (note that maximization can be performed by considering the function h := − f {\displaystyle h:=-f} instead). The function takes a candidate solution as argument in the form of a vector of real numbers. It produces a real number as output which indicates the fitness of the given candidate solution. The gradient of f {\displaystyle f} is not known. The goal is to find a solution m {\displaystyle \mathbf {m} } for which f ( m ) ≤ f ( p ) {\displaystyle f(\mathbf {m} )\leq f(\mathbf {p} )} for all p {\displaystyle \mathbf {p} } in the search-space, which means that m {\displaystyle \mathbf {m} } is the global minimum. Let x ∈ R n {\displaystyle \mathbf {x} \in \mathbb {R} ^{n}} designate a candidate solution (agent) in the population. The basic DE algorithm can then be described as follows: Choose the parameters NP ≥ 4 {\displaystyle {\text{NP}}\geq 4} , CR ∈ [ 0 , 1 ] {\displaystyle {\text{CR}}\in [0,1]} , and F ∈ [ 0 , 2 ] {\displaystyle F\in [0,2]} . NP : NP {\displaystyle {\text{NP}}} is the population size, i.e. the number of candidate agents or "parents". CR : The parameter CR ∈ [ 0 , 1 ] {\displaystyle {\text{CR}}\in [0,1]} is called the crossover probability. F : The parameter F ∈ [ 0 , 2 ] {\displaystyle F\in [0,2]} is called the differential weight. Typical settings are N P = 10 n {\displaystyle NP=10n} , C R = 0.9 {\displaystyle CR=0.9} and F = 0.8 {\displaystyle F=0.8} . Optimization performance may be greatly impacted by these choices; see below. Initialize all agents x {\displaystyle \mathbf {x} } with random positions in the search-space. Until a termination criterion is met (e.g. number of iterations performed, or adequate fitness reached), repeat the following: For each agent x {\displaystyle \mathbf {x} } in the population do: Pick three agents a , b {\displaystyle \mathbf {a} ,\mathbf {b} } , and c {\displaystyle \mathbf {c} } from the population at random, they must be distinct from each other as well as from agent x {\displaystyle \mathbf {x} } . ( a {\displaystyle \mathbf {a} } is called the "base" vector.) Pick a random index R ∈ { 1 , … , n } {\displaystyle R\in \{1,\ldots ,n\}} where n {\displaystyle n} is the dimensionality of the problem being optimized. Compute the agent's potentially new position y = [ y 1 , … , y n ] {\displaystyle \mathbf {y} =[y_{1},\ldots ,y_{n}]} as follows: For each i ∈ { 1 , … , n } {\displaystyle i\in \{1,\ldots ,n\}} , pick a uniformly distributed random number r i ∼ U ( 0 , 1 ) {\displaystyle r_{i}\sim U(0,1)} If r i < C R {\displaystyle r_{i} Read more →

• 

  Stochastic variance reduction

  (Stochastic) variance reduction is an algorithmic approach to minimizing functions that can be decomposed into finite sums. By exploiting the finite sum structure, variance reduction techniques are able to achieve convergence rates that are impossible to achieve with methods that treat the objective as an infinite sum, as in the classical Stochastic approximation setting. Variance reduction approaches are widely used for training machine learning models such as logistic regression and support vector machines as these problems have finite-sum structure and uniform conditioning that make them ideal candidates for variance reduction. == Finite sum objectives == A function f {\displaystyle f} is considered to have finite sum structure if it can be decomposed into a summation or average: f ( x ) = 1 n ∑ i = 1 n f i ( x ) , {\displaystyle f(x)={\frac {1}{n}}\sum _{i=1}^{n}f_{i}(x),} where the function value and derivative of each f i {\displaystyle f_{i}} can be queried independently. Although variance reduction methods can be applied for any positive n {\displaystyle n} and any f i {\displaystyle f_{i}} structure, their favorable theoretical and practical properties arise when n {\displaystyle n} is large compared to the condition number of each f i {\displaystyle f_{i}} , and when the f i {\displaystyle f_{i}} have similar (but not necessarily identical) Lipschitz smoothness and strong convexity constants. The finite sum structure should be contrasted with the stochastic approximation setting which deals with functions of the form f ( θ ) = E ξ ⁡ [ F ( θ , ξ ) ] {\textstyle f(\theta )=\operatorname {E} _{\xi }[F(\theta ,\xi )]} which is the expected value of a function depending on a random variable ξ {\textstyle \xi } . Any finite sum problem can be optimized using a stochastic approximation algorithm by using F ( ⋅ , ξ ) = f ξ {\displaystyle F(\cdot ,\xi )=f_{\xi }} . == Rapid Convergence == Stochastic variance reduced methods without acceleration are able to find a minima of f {\displaystyle f} within accuracy ϵ > {\displaystyle \epsilon >} , i.e. f ( x ) − f ( x ∗ ) ≤ ϵ {\displaystyle f(x)-f(x_{})\leq \epsilon } in a number of steps of the order: O ( ( L μ + n ) log ⁡ ( 1 ϵ ) ) . {\displaystyle O\left(\left({\frac {L}{\mu }}+n\right)\log \left({\frac {1}{\epsilon }}\right)\right).} The number of steps depends only logarithmically on the level of accuracy required, in contrast to the stochastic approximation framework, where the number of steps O ( L / ( μ ϵ ) ) {\displaystyle O{\bigl (}L/(\mu \epsilon ){\bigr )}} required grows proportionally to the accuracy required. Stochastic variance reduction methods converge almost as fast as the gradient descent method's O ( ( L / μ ) log ⁡ ( 1 / ϵ ) ) {\displaystyle O{\bigl (}(L/\mu )\log(1/\epsilon ){\bigr )}} rate, despite using only a stochastic gradient, at a 1 / n {\displaystyle 1/n} lower cost than gradient descent. Accelerated methods in the stochastic variance reduction framework achieve even faster convergence rates, requiring only O ( ( n L μ + n ) log ⁡ ( 1 ϵ ) ) {\displaystyle O\left(\left({\sqrt {\frac {nL}{\mu }}}+n\right)\log \left({\frac {1}{\epsilon }}\right)\right)} steps to reach ϵ {\displaystyle \epsilon } accuracy, potentially n {\displaystyle {\sqrt {n}}} faster than non-accelerated methods. Lower complexity bounds. for the finite sum class establish that this rate is the fastest possible for smooth strongly convex problems. == Approaches == Variance reduction approaches fall within four main categories: table averaging methods, full-gradient snapshot methods, recursive estimator methods (e.g., SARAH), and dual methods. Each category contains methods designed for dealing with convex, non-smooth, and non-convex problems, each differing in hyper-parameter settings and other algorithmic details. === SAGA === In the SAGA method, the prototypical table averaging approach, a table of size n {\displaystyle n} is maintained that contains the last gradient witnessed for each f i {\displaystyle f_{i}} term, which we denote g i {\displaystyle g_{i}} . At each step, an index i {\displaystyle i} is sampled, and a new gradient ∇ f i ( x k ) {\displaystyle \nabla f_{i}(x_{k})} is computed. The iterate x k {\displaystyle x_{k}} is updated with: x k + 1 = x k − γ [ ∇ f i ( x k ) − g i + 1 n ∑ i = 1 n g i ] , {\displaystyle x_{k+1}=x_{k}-\gamma \left[\nabla f_{i}(x_{k})-g_{i}+{\frac {1}{n}}\sum _{i=1}^{n}g_{i}\right],} and afterwards table entry i {\displaystyle i} is updated with g i = ∇ f i ( x k ) {\displaystyle g_{i}=\nabla f_{i}(x_{k})} . SAGA is among the most popular of the variance reduction methods due to its simplicity, easily adaptable theory, and excellent performance. It is the successor of the SAG method, improving on its flexibility and performance. === SVRG === The stochastic variance reduced gradient method (SVRG), the prototypical snapshot method, uses a similar update except instead of using the average of a table it instead uses a full-gradient that is reevaluated at a snapshot point x ~ {\displaystyle {\tilde {x}}} at regular intervals of m ≥ n {\displaystyle m\geq n} iterations. The update becomes: x k + 1 = x k − γ [ ∇ f i ( x k ) − ∇ f i ( x ~ ) + ∇ f ( x ~ ) ] , {\displaystyle x_{k+1}=x_{k}-\gamma [\nabla f_{i}(x_{k})-\nabla f_{i}({\tilde {x}})+\nabla f({\tilde {x}})],} This approach requires two stochastic gradient evaluations per step, one to compute ∇ f i ( x k ) {\displaystyle \nabla f_{i}(x_{k})} and one to compute ∇ f i ( x ~ ) , {\displaystyle \nabla f_{i}({\tilde {x}}),} where-as table averaging approaches need only one. Despite the high computational cost, SVRG is popular as its simple convergence theory is highly adaptable to new optimization settings. It also has lower storage requirements than tabular averaging approaches, which make it applicable in many settings where tabular methods can not be used. === SARAH === The SARAH (stochastic recursive gradient) method maintains a recursive estimator of the gradient rather than storing a table of past gradients (as in SAGA) or computing periodic full-gradient snapshots (as in SVRG). At the start of an inner loop, a full gradient is computed at a reference point x ~ {\displaystyle {\tilde {x}}} : v 0 = ∇ f ( x ~ ) {\displaystyle v_{0}=\nabla f({\tilde {x}})} . For inner iterations, with a sampled index i k {\displaystyle i_{k}} , the gradient estimator and iterate are updated by: v k = ∇ f i k ( x k ) − ∇ f i k ( x k − 1 ) + v k − 1 , x k + 1 = x k − γ v k . {\displaystyle v_{k}=\nabla f_{i_{k}}(x_{k})-\nabla f_{i_{k}}(x_{k-1})+v_{k-1},\qquad x_{k+1}=x_{k}-\gamma v_{k}.} This recursion requires two component-gradient evaluations per step ∇ f i k ( x k ) {\displaystyle \nabla f_{i_{k}}(x_{k})} and ∇ f i k ( x k − 1 ) {\displaystyle \nabla f_{i_{k}}(x_{k-1})} but does not need to store per-sample gradients, resulting in lower memory cost than table-averaging methods. SARAH admits linear convergence for strongly convex functions and has been extended to more general nonconvex and composite problems. === SDCA === Exploiting the dual representation of the objective leads to another variance reduction approach that is particularly suited to finite-sums where each term has a structure that makes computing the convex conjugate f i ∗ , {\displaystyle f_{i}^{},} or its proximal operator tractable. The standard SDCA method considers finite sums that have additional structure compared to generic finite sum setting: f ( x ) = 1 n ∑ i = 1 n f i ( x T v i ) + λ 2 ‖ x ‖ 2 , {\displaystyle f(x)={\frac {1}{n}}\sum _{i=1}^{n}f_{i}(x^{T}v_{i})+{\frac {\lambda }{2}}\|x\|^{2},} where each f i {\displaystyle f_{i}} is 1 dimensional and each v i {\displaystyle v_{i}} is a data point associated with f i {\displaystyle f_{i}} . SDCA solves the dual problem: max α ∈ R n − 1 n ∑ i = 1 n f i ∗ ( − α i ) − λ 2 ‖ 1 λ n ∑ i = 1 n α i v i ‖ 2 , {\displaystyle \max _{\alpha \in \mathbb {R} ^{n}}-{\frac {1}{n}}\sum _{i=1}^{n}f_{i}^{}(-\alpha _{i})-{\frac {\lambda }{2}}\left\|{\frac {1}{\lambda n}}\sum _{i=1}^{n}\alpha _{i}v_{i}\right\|^{2},} by a stochastic coordinate ascent procedure, where at each step the objective is optimized with respect to a randomly chosen coordinate α i {\displaystyle \alpha _{i}} , leaving all other coordinates the same. An approximate primal solution x {\displaystyle x} can be recovered from the α {\displaystyle \alpha } values: x = 1 λ n ∑ i = 1 n α i v i {\displaystyle x={\frac {1}{\lambda n}}\sum _{i=1}^{n}\alpha _{i}v_{i}} . This method obtains similar theoretical rates of convergence to other stochastic variance reduced methods, while avoiding the need to specify a step-size parameter. It is fast in practice when λ {\displaystyle \lambda } is large, but significantly slower than the other approaches when λ {\displaystyle \lambda } is small. == Accelerated approaches == Accelerated variance reduction methods are built upon the standard methods above. The earliest approaches make use of proximal operators t

  Read more →
• 

  GazoPa

  GazoPa was an image search engine that used features from an image to search for and identify similar images which closed in 2011. GazoPa began in TechCrunch50 in 2008 before launching into a state of open beta in 2009. GazoPa branched out and released a flower photo community site called "GazoPa Bloom" in 2010. This site was for exploring flower images and, if users need help identifying a flower, uploading images for other people try to identify them. Both sites closed to the public in 2011 when the company decided to focus on other areas of their business.

  Read more →
• 

  AdaBoost

  AdaBoost (short for Adaptive Boosting) is a statistical classification meta-algorithm formulated by Yoav Freund and Robert Schapire in 1995, who won the 2003 Gödel Prize for their work. It can be used in conjunction with many types of learning algorithm to improve performance. The output of multiple weak learners is combined into a weighted sum that represents the final output of the boosted classifier. Usually, AdaBoost is presented for binary classification, although it can be generalized to multiple classes or bounded intervals of real values. AdaBoost is adaptive in the sense that subsequent weak learners (models) are adjusted in favor of instances misclassified by previous models. In some problems, it can be less susceptible to overfitting than other learning algorithms. The individual learners can be weak, but as long as the performance of each one is slightly better than random guessing, the final model can be proven to converge to a strong learner. Although AdaBoost is typically used to combine weak base learners (such as decision stumps), it has been shown to also effectively combine strong base learners (such as deeper decision trees), producing an even more accurate model. Every learning algorithm tends to suit some problem types better than others, and typically has many different parameters and configurations to adjust before it achieves optimal performance on a dataset. AdaBoost (with decision trees as the weak learners) is often referred to as the best out-of-the-box classifier. When used with decision tree learning, information gathered at each stage of the AdaBoost algorithm about the relative 'hardness' of each training sample is fed into the tree-growing algorithm such that later trees tend to focus on harder-to-classify examples. == Training == AdaBoost refers to a particular method of training a boosted classifier. A boosted classifier is a classifier of the form F T ( x ) = ∑ t = 1 T f t ( x ) {\displaystyle F_{T}(x)=\sum _{t=1}^{T}f_{t}(x)} where each f t {\displaystyle f_{t}} is a weak learner that takes an object x {\displaystyle x} as input and returns a value indicating the class of the object. For example, in the two-class problem, the sign of the weak learner's output identifies the predicted object class and the absolute value gives the confidence in that classification. Each weak learner produces an output hypothesis h {\displaystyle h} which fixes a prediction h ( x i ) {\displaystyle h(x_{i})} for each sample in the training set. At each iteration t {\displaystyle t} , a weak learner is selected and assigned a coefficient α t {\displaystyle \alpha _{t}} such that the total training error E t {\displaystyle E_{t}} of the resulting t {\displaystyle t} -stage boosted classifier is minimized. E t = ∑ i E [ F t − 1 ( x i ) + α t h ( x i ) ] {\displaystyle E_{t}=\sum _{i}E[F_{t-1}(x_{i})+\alpha _{t}h(x_{i})]} Here F t − 1 ( x ) {\displaystyle F_{t-1}(x)} is the boosted classifier that has been built up to the previous stage of training and f t ( x ) = α t h ( x ) {\displaystyle f_{t}(x)=\alpha _{t}h(x)} is the weak learner that is being considered for addition to the final classifier. === Weighting === At each iteration of the training process, a weight w i , t {\displaystyle w_{i,t}} is assigned to each sample in the training set equal to the current error E ( F t − 1 ( x i ) ) {\displaystyle E(F_{t-1}(x_{i}))} on that sample. These weights can be used in the training of the weak learner. For instance, decision trees can be grown which favor the splitting of sets of samples with large weights. == Derivation == This derivation follows Rojas (2009): Suppose we have a data set { ( x 1 , y 1 ) , … , ( x N , y N ) } {\displaystyle \{(x_{1},y_{1}),\ldots ,(x_{N},y_{N})\}} where each item x i {\displaystyle x_{i}} has an associated class y i ∈ { − 1 , 1 } {\displaystyle y_{i}\in \{-1,1\}} , and a set of weak classifiers { k 1 , … , k L } {\displaystyle \{k_{1},\ldots ,k_{L}\}} each of which outputs a classification k j ( x i ) ∈ { − 1 , 1 } {\displaystyle k_{j}(x_{i})\in \{-1,1\}} for each item. After the ( m − 1 ) {\displaystyle (m-1)} -th iteration our boosted classifier is a linear combination of the weak classifiers of the form: C ( m − 1 ) ( x i ) = α 1 k 1 ( x i ) + ⋯ + α m − 1 k m − 1 ( x i ) , {\displaystyle C_{(m-1)}(x_{i})=\alpha _{1}k_{1}(x_{i})+\cdots +\alpha _{m-1}k_{m-1}(x_{i}),} where the class will be the sign of C ( m − 1 ) ( x i ) {\displaystyle C_{(m-1)}(x_{i})} . At the m {\displaystyle m} -th iteration we want to extend this to a better boosted classifier by adding another weak classifier k m {\displaystyle k_{m}} , with another weight α m {\displaystyle \alpha _{m}} : C m ( x i ) = C ( m − 1 ) ( x i ) + α m k m ( x i ) {\displaystyle C_{m}(x_{i})=C_{(m-1)}(x_{i})+\alpha _{m}k_{m}(x_{i})} So it remains to determine which weak classifier is the best choice for k m {\displaystyle k_{m}} , and what its weight α m {\displaystyle \alpha _{m}} should be. We define the total error E {\displaystyle E} of C m {\displaystyle C_{m}} as the sum of its exponential loss on each data point, given as follows: E = ∑ i = 1 N e − y i C m ( x i ) = ∑ i = 1 N e − y i C ( m − 1 ) ( x i ) e − y i α m k m ( x i ) {\displaystyle E=\sum _{i=1}^{N}e^{-y_{i}C_{m}(x_{i})}=\sum _{i=1}^{N}e^{-y_{i}C_{(m-1)}(x_{i})}e^{-y_{i}\alpha _{m}k_{m}(x_{i})}} Letting w i ( 1 ) = 1 {\displaystyle w_{i}^{(1)}=1} and w i ( m ) = e − y i C m − 1 ( x i ) {\displaystyle w_{i}^{(m)}=e^{-y_{i}C_{m-1}(x_{i})}} for m > 1 {\displaystyle m>1} , we have: E = ∑ i = 1 N w i ( m ) e − y i α m k m ( x i ) {\displaystyle E=\sum _{i=1}^{N}w_{i}^{(m)}e^{-y_{i}\alpha _{m}k_{m}(x_{i})}} We can split this summation between those data points that are correctly classified by k m {\displaystyle k_{m}} (so y i k m ( x i ) = 1 {\displaystyle y_{i}k_{m}(x_{i})=1} ) and those that are misclassified (so y i k m ( x i ) = − 1 {\displaystyle y_{i}k_{m}(x_{i})=-1} ): E = ∑ y i = k m ( x i ) w i ( m ) e − α m + ∑ y i ≠ k m ( x i ) w i ( m ) e α m = ∑ i = 1 N w i ( m ) e − α m + ∑ y i ≠ k m ( x i ) w i ( m ) ( e α m − e − α m ) {\displaystyle {\begin{aligned}E&=\sum _{y_{i}=k_{m}(x_{i})}w_{i}^{(m)}e^{-\alpha _{m}}+\sum _{y_{i}\neq k_{m}(x_{i})}w_{i}^{(m)}e^{\alpha _{m}}\\&=\sum _{i=1}^{N}w_{i}^{(m)}e^{-\alpha _{m}}+\sum _{y_{i}\neq k_{m}(x_{i})}w_{i}^{(m)}\left(e^{\alpha _{m}}-e^{-\alpha _{m}}\right)\end{aligned}}} Since the only part of the right-hand side of this equation that depends on k m {\displaystyle k_{m}} is ∑ y i ≠ k m ( x i ) w i ( m ) {\textstyle \sum _{y_{i}\neq k_{m}(x_{i})}w_{i}^{(m)}} , we see that the k m {\displaystyle k_{m}} that minimizes E {\displaystyle E} is the one in the set { k 1 , … , k L } {\displaystyle \{k_{1},\ldots ,k_{L}\}} that minimizes ∑ y i ≠ k m ( x i ) w i ( m ) {\textstyle \sum _{y_{i}\neq k_{m}(x_{i})}w_{i}^{(m)}} [assuming that α m > 0 {\displaystyle \alpha _{m}>0} ], i.e. the weak classifier with the lowest weighted error (with weights w i ( m ) = e − y i C m − 1 ( x i ) {\displaystyle w_{i}^{(m)}=e^{-y_{i}C_{m-1}(x_{i})}} ). To determine the desired weight α m {\displaystyle \alpha _{m}} that minimizes E {\displaystyle E} with the k m {\displaystyle k_{m}} that we just determined, we differentiate: d E d α m = d ( ∑ y i = k m ( x i ) w i ( m ) e − α m + ∑ y i ≠ k m ( x i ) w i ( m ) e α m ) d α m {\displaystyle {\frac {dE}{d\alpha _{m}}}={\frac {d(\sum _{y_{i}=k_{m}(x_{i})}w_{i}^{(m)}e^{-\alpha _{m}}+\sum _{y_{i}\neq k_{m}(x_{i})}w_{i}^{(m)}e^{\alpha _{m}})}{d\alpha _{m}}}} The value of α m {\displaystyle \alpha _{m}} that minimizes the above expression is: α m = 1 2 ln ⁡ ( ∑ y i = k m ( x i ) w i ( m ) ∑ y i ≠ k m ( x i ) w i ( m ) ) {\displaystyle \alpha _{m}={\frac {1}{2}}\ln \left({\frac {\sum _{y_{i}=k_{m}(x_{i})}w_{i}^{(m)}}{\sum _{y_{i}\neq k_{m}(x_{i})}w_{i}^{(m)}}}\right)} We calculate the weighted error rate of the weak classifier to be ϵ m = ∑ y i ≠ k m ( x i ) w i ( m ) ∑ i = 1 N w i ( m ) {\displaystyle \epsilon _{m}={\frac {\sum _{y_{i}\neq k_{m}(x_{i})}w_{i}^{(m)}}{\sum _{i=1}^{N}w_{i}^{(m)}}}} , so it follows that: α m = 1 2 ln ⁡ ( 1 − ϵ m ϵ m ) {\displaystyle \alpha _{m}={\frac {1}{2}}\ln \left({\frac {1-\epsilon _{m}}{\epsilon _{m}}}\right)} which is the negative logit function multiplied by 0.5. Due to the convexity of E {\displaystyle E} as a function of α m {\displaystyle \alpha _{m}} , this new expression for α m {\displaystyle \alpha _{m}} gives the global minimum of the loss function. Note: This derivation only applies when k m ( x i ) ∈ { − 1 , 1 } {\displaystyle k_{m}(x_{i})\in \{-1,1\}} , though it can be a good starting guess in other cases, such as when the weak learner is biased ( k m ( x ) ∈ { a , b } , a ≠ − b {\displaystyle k_{m}(x)\in \{a,b\},a\neq -b} ), has multiple leaves ( k m ( x ) ∈ { a , b , … , n } {\displaystyle k_{m}(x)\in \{a,b,\dots ,n\}} ) or is some other function k m ( x ) ∈ R {\displaystyle k_{m}(x)\in \mathbb {R} } . Thus we have derived the AdaBoost algorithm: At each

  Read more →
• 

  ARKA descriptors in QSAR

  In computational chemistry and cheminformatics, ARKA descriptors in QSAR are a class of molecular descriptors used in quantitative structure–activity relationship (QSAR) modeling (or related approaches such as QSPR and QSTR), a computational method for predicting the biological activity or toxicity of chemical compounds based on their molecular structure. Molecular descriptors are numerical values that summarize information about a molecule's structure, topology, geometry, or physicochemical properties in a form suitable for machine learning or statistical modeling. ARKA (Arithmetic Residuals in K-Groups Analysis) descriptors differ from traditional descriptors by encoding atomic-level information through recursive autoregression techniques, which aim to capture subtle structural patterns and improve predictive accuracy. They are designed to be both interpretable and well-suited to modeling nonlinear relationships in QSAR studies. == Comparisons == While QSAR is essentially a similarity-based approach, the occurrence of activity/property cliffs may greatly reduce the predictive accuracy of the developed models. The novel Arithmetic Residuals in K-groups Analysis (ARKA) approach is a supervised dimensionality reduction technique developed by the DTC Laboratory, Jadavpur University that can easily identify activity cliffs in a data set. Activity cliffs are similar in their structures but differ considerably in their activity. The basic idea of the ARKA descriptors is to group the conventional QSAR descriptors based on a predefined criterion and then assign weightage to each descriptor in each group. ARKA descriptors have also been used to develop classification-based and regression-based QSAR models with acceptable quality statistics. The ARKA descriptors have been used for the identification of activity cliffs in QSAR studies and/or model development by multiple researchers. A tutorial presentation on the ARKA descriptors is available. Recently a multi-class ARKA framework has been proposed for improved q-RASAR model generation.

  Read more →
• 

  Genetic programming

  Genetic programming (GP) is an evolutionary algorithm, an artificial intelligence technique mimicking natural evolution, which operates on a population of programs. It applies the genetic operators selection according to a predefined fitness measure, mutation and crossover. The crossover operation involves swapping specified parts of selected pairs (parents) to produce new and different offspring that become part of the new generation of programs. Some programs not selected for reproduction are copied from the current generation to the new generation. Mutation involves substitution of some random part of a program with some other random part of a program. Then the selection and other operations are recursively applied to the new generation of programs. Typically, members of each new generation are on average more fit than the members of the previous generation, and the best-of-generation program is often better than the best-of-generation programs from previous generations. Termination of the evolution usually occurs when some individual program reaches a predefined proficiency or fitness level. It may and often does happen that a particular run of the algorithm results in premature convergence to some local maximum that is not a globally optimal or even good solution. Multiple runs (dozens to hundreds) are usually necessary to produce a very good result. It may also be necessary to have a large starting population size and variability of the individuals to avoid pathologies. == History == The first record of the proposal to evolve programs is probably that of Alan Turing in 1950 in "Computing Machinery and Intelligence". There was a gap of 25 years before the publication of John Holland's 'Adaptation in Natural and Artificial Systems' laid out the theoretical and empirical foundations of the science. In 1981, Richard Forsyth demonstrated the successful evolution of small programs, represented as trees, to perform classification of crime scene evidence for the UK Home Office. Although the idea of evolving programs, initially in the computer language Lisp, was current amongst John Holland's students, it was not until they organised the first Genetic Algorithms (GA) conference in Pittsburgh that Nichael Cramer published evolved programs in two specially designed languages, which included the first statement of modern "tree-based" genetic programming (that is, procedural languages organized in tree-based structures and operated on by suitably defined GA-operators). In 1988, John Koza (also a PhD student of John Holland) patented his invention of a GA for program evolution. This was followed by publication in the International Joint Conference on Artificial Intelligence IJCAI-89. Koza followed this with 205 publications on "genetic programming", a term coined by David Goldberg, also a PhD student of John Holland. However, it is the series of 4 books by Koza, starting in 1992 with accompanying videos, that really established GP. Subsequently, there was an enormous expansion of the number of publications with the Genetic Programming Bibliography, surpassing 10,000 entries. In 2010, Koza listed 77 results where genetic programming was human competitive. The departure of GP from the rigid, fixed-length representations typical of early GA models was not entirely without precedent. Early work on variable-length representations laid the groundwork. One notable example is messy genetic algorithms, which introduced irregular, variable-length chromosomes to address building block disruption and positional bias in standard GAs. Another precursor was robot trajectory programming, where genome representations encoded program instructions for robotic movements—structures inherently variable in length. Even earlier, unfixed-length representations were proposed in a doctoral dissertation by Cavicchio, who explored adaptive search using simulated evolution. His work provided foundational ideas for flexible program structures. In 1996, Koza started the annual Genetic Programming conference, which was followed in 1998 by the annual EuroGP conference, and the first book in a GP series edited by Koza. 1998 also saw the first GP textbook. GP continued to flourish, leading to the first specialist GP journal and three years later (2003) the annual Genetic Programming Theory and Practice (GPTP) workshop was established by Rick Riolo. Genetic programming papers continue to be published at a diversity of conferences and associated journals. Today there are nineteen GP books including several for students. === Foundational work in GP === Early work that set the stage for current genetic programming research topics and applications is diverse, and includes software synthesis and repair, predictive modeling, data mining, financial modeling, soft sensors, design, and image processing. Applications in some areas, such as design, often make use of intermediate representations, such as Fred Gruau's cellular encoding. Industrial uptake has been significant in several areas including finance, the chemical industry, bioinformatics and the steel industry. == Methods == === Program representation === GP evolves computer programs, traditionally represented in memory as tree structures. Trees can be easily evaluated in a recursive manner. Every internal node has an operator function and every terminal node has an operand, making mathematical expressions easy to evolve and evaluate. Thus traditionally GP favors the use of programming languages that naturally embody tree structures (for example, Lisp; other functional programming languages are also suitable). Non-tree representations have been suggested and successfully implemented, such as linear genetic programming, which perhaps suits the more traditional imperative languages. The commercial GP software Discipulus uses automatic induction of binary machine code ("AIM") to achieve better performance. μGP uses directed multigraphs to generate programs that fully exploit the syntax of a given assembly language. Multi expression programming uses three-address code for encoding solutions. Other program representations on which significant research and development have been conducted include programs for stack-based virtual machines, and sequences of integers that are mapped to arbitrary programming languages via grammars. Cartesian genetic programming is another form of GP, which uses a graph representation instead of the usual tree based representation to encode computer programs. Most representations have structurally noneffective code (introns). Such non-coding genes may seem to be useless because they have no effect on the performance of any one individual. However, they alter the probabilities of generating different offspring under the variation operators, and thus alter the individual's variational properties. Experiments seem to show faster convergence when using program representations that allow such non-coding genes, compared to program representations that do not have any non-coding genes. Instantiations may have both trees with introns and those without; the latter are called canonical trees. Special canonical crossover operators are introduced that maintain the canonical structure of parents in their children. === Initialisation === The methods for creation of the initial population include: Grow creates the individuals sequentially. Every GP tree is created starting from the root, creating functional nodes with children as well as terminal nodes up to a certain depth. Full is similar to the Grow. The difference is that all brunches in a tree are of same predetermined depth. Ramped half-and-half creates a population consisting of m d − 1 {\displaystyle md-1} parts and a maximum depth of m d {\displaystyle md} for its trees. The first part has a maximum depth of 2, second of 3 and so on up to the m d − 1 {\displaystyle md-1} -th part with maximum depth m d {\displaystyle md} . Half of every part is created by Grow, while the other part is created by Full. === Selection === Selection is a process whereby certain individuals are selected from the current generation that would serve as parents for the next generation. The individuals are selected probabilistically such that the better performing individuals have a higher chance of getting selected. The most commonly used selection method in GP is tournament selection, although other methods such as fitness proportionate selection, lexicase selection, and others have been demonstrated to perform better for many GP problems. Elitism, which involves seeding the next generation with the best individual (or best n individuals) from the current generation, is a technique sometimes employed to avoid regression. === Crossover === In genetic programming two fit individuals are chosen from the population to be parents for one or two children. In tree genetic programming, these parents are represented as inverted lisp like trees, with their root nodes at the top. In subtree cro

  Read more →
• 

  Software engineering demographics

  Software engineers make up a significant portion of the global workforce. As of 2022, there are an estimated 26.9 million professional software engineers worldwide, up from 21 million in 2016. == By country == === United States === In 2023, there were an estimated 1.6 million professional software developers in North America. There are 166 million people employed in the US workforce, making software developers 0.96% of the total workforce. ==== Summary ==== ==== Software engineers vs. traditional engineers ==== The following two tables compare the number of software engineers (611,900 in 2002) versus the number of traditional engineers (1,157,020 in 2002). There are another 1,500,000 people in system analysis, system administration, and computer support, many of whom might be called software engineers. Many systems analysts manage software development teams, and as analysis is an important software engineering role, many of them may be considered software engineers in the near future. This means that the number of software engineers may actually be much higher. It is important to note that the number of software engineers declined by 5 to 10 percent from 2000 to 2002. ==== Computer managers vs. construction and engineering managers ==== Computer and information system managers (264,790) manage software projects, as well as computer operations. Similarly, Construction and engineering managers (413,750) oversee engineering projects, manufacturing plants, and construction sites. Computer management is 64% the size of construction and engineering management. ==== Software engineering educators vs. engineering educators ==== Most people working in the field of computer science, whether making software systems (software engineering) or studying the theoretical and mathematical facts of software systems (computer science), acquire degrees in computer science. According to the U.S. Bureau of Labor Statistics (May 2023 data), there were approximately 44,800 postsecondary computer science teachers and 50,300 engineering teachers, indicating that the computer science educator workforce is nearly 89% as large as that of engineering educators. The combined number of postsecondary chemistry (25,400) and physics (17,100) teachers totaled 42,500, slightly less than the number of computer science educators. ==== Other software and engineering roles ==== ==== Relation to IT demographics ==== Software engineers are part of the much larger software, hardware, application, and operations community. In 2000 in the U.S., there were about 680,000 software engineers and about 10,000,000 IT workers. As of early 2025, there are an estimated 47.2 million software developers worldwide, representing a 50% increase from 31 million in Q1 2022. There are no numbers on testers in the BLS data. === India === There has been a healthy growth in the number of India's IT professionals over the past few years. From a base of 6,800 knowledge workers in 1985–86, the number increased to 522,000 software and services professionals by the end of 2001–02. It is estimated that out of these 528,000 knowledge workers, almost 170,000 are working in the IT software and services export industry; nearly 106,000 are working in the IT enabled services and over 230,000 in user organizations. === Australia === In May 2024, the Australian government reported that 169,300 Australians are employed as software and applications programmers, 17% of who are women. The role grew annually by 8,300 workers. === Russia === According to the Russian government, the number of IT specialists in the country increased by 13% in 2023, reaching approximately 857,000. During the initial phase of the 2022 invasion of Ukraine, an estimated 100,000 IT specialists left Russia.

  Read more →
• 

  Multilinear principal component analysis

  Multilinear principal component analysis (MPCA) is a multilinear extension of principal component analysis (PCA) that is used to analyze M-way arrays, also informally referred to as "data tensors". M-way arrays may be modeled by linear tensor models, such as CANDECOMP/Parafac, or by multilinear tensor models, such as multilinear principal component analysis (MPCA) or multilinear (tensor) independent component analysis (MICA). In 2005, Vasilescu and Terzopoulos introduced the Multilinear PCA terminology as a way to better differentiate between multilinear data models that employed 2nd order statistics versus higher order statistics to compute a set of independent components for each mode, such as Multilinear ICA Multilinear PCA may be applied to compute the causal factors of data formation, or as signal processing tool on data tensors whose individual observation have either been vectorized, or whose observations are treated as a collection of column/row observations, an "observation as a matrix", and concatenated into a data tensor. The latter approach is suitable for compression and reducing redundancy in the rows, columns and fibers that are unrelated to the causal factors of data formation. Vasilescu and Terzopoulos in their paper "TensorFaces" introduced the M-mode SVD algorithm which are algorithms misidentified in the literature as the HOSVD or the Tucker which employ the power method or gradient descent, respectively. Vasilescu and Terzopoulos framed the data analysis, recognition and synthesis problems as multilinear tensor problems. Data is viewed as the compositional consequence of several causal factors, that are well suited for multi-modal tensor factor analysis. The power of the tensor framework was showcased by analyzing human motion joint angles, facial images or textures in the following papers: Human Motion Signatures (CVPR 2001, ICPR 2002), face recognition – TensorFaces, (ECCV 2002, CVPR 2003, etc.) and computer graphics – TensorTextures (Siggraph 2004). == The algorithm == The MPCA solution follows the alternating least square (ALS) approach. It is iterative in nature. As in PCA, MPCA works on centered data. Centering is a little more complicated for tensors, and it is problem dependent. == Feature selection == MPCA features: Supervised MPCA is employed in causal factor analysis that facilitates object recognition while a semi-supervised MPCA feature selection is employed in visualization tasks. == Extensions == Various extension of MPCA: Robust MPCA (RMPCA) Multi-Tensor Factorization, that also finds the number of components automatically (MTF)

  Read more →
• 

  Sigmoid function

  A sigmoid function is any mathematical function whose graph has a characteristic S-shaped or sigmoid curve. A common example of a sigmoid function is the logistic function. Other sigmoid functions are given in the Examples section. In some fields, most notably in the context of artificial neural networks, the term "sigmoid function" is used as a synonym for "logistic function". Special cases of sigmoid functions include the Gompertz curve (used in modeling systems that saturate at large values of x) and the ogee curve (used in the spillway of some dams). Sigmoid functions have domain of all real numbers, with return (response) value commonly monotonically increasing but could be decreasing. Sigmoid functions most often show a return value (y axis) in the range 0 to 1. Another commonly used range is from −1 to 1. There is also the Heaviside step function, which instantaneously transitions between 0 and 1. A wide variety of sigmoid functions including the logistic and hyperbolic tangent functions have been used as the activation function of artificial neurons. Sigmoid curves are also common in statistics as cumulative distribution functions (which go from 0 to 1), such as the integrals of the logistic density, the normal density, and Student's t probability density functions. The logistic sigmoid function is invertible, and its inverse is the logit function. == Theory == In mathematics, a unitary sigmoid function is a bounded sigmoid-type function normalized to the unit range, typically with lower and upper asymptotes at 0 and 1. The theory proposed by Grebenc distinguishes three kinds of unitary sigmoid functions according to their asymptotic behavior and the presence or absence of oscillation near the asymptotes. A general form of a unitary sigmoid function is y = A S ( f ( x ) ) + B , {\displaystyle y=A\,S(f(x))+B,} where S {\displaystyle S} is an increasing sigmoid function, f ( x ) {\displaystyle f(x)} is a transformation of the independent variable, and A {\displaystyle A} and B {\displaystyle B} are constants controlling scaling and translation. === Classification === ==== 1st kind ==== A unitary sigmoid function of the first kind is a bounded increasing function that approaches its lower and upper asymptotes monotonically, without oscillation. This class includes many of the standard sigmoid functions used in statistics, biomathematics, and engineering, such as the logistic function and related generalizations. ==== 2nd kind ==== A unitary sigmoid function of the second kind is a bounded increasing function that oscillates near the upper asymptote while preserving an overall sigmoid transition. ==== 3rd kind ==== A unitary sigmoid function of the third kind is a bounded increasing function that oscillates near both the lower and upper asymptotes. These functions retain the global shape of a sigmoid curve but exhibit oscillatory behavior in the vicinity of both limiting states. === Taxonomy === The tables below show the taxonomy of unitary sigmoid functions of all three kinds. Table 1. Taxonomy matrix with examples of sigmoid functions of the 1st kind Table 2. Taxonomy matrix with examples of sigmoid functions of the 2nd kind on the unbounded interval Table 3. Taxonomy matrix with examples of sigmoid functions of the 3rd kind === Construction methods === The same theory presents a list of 30 methods for constructing sigmoid functions.. These include algebraic transformations, integration and convolution methods, constructions from bell-shaped functions, solutions of ordinary and partial differential equations, recursive schemes, stochastic differential equations, feedback systems, and chaotic systems. M0: Construction method for sigmoid functions not evident or intuitive M1: Inverse of singularity functions M2: Sigmoid functions of embedded positive functions M3: Rising a sigmoid function to the power M4: Exponentiating a sigmoid function M5: Symmetric sigmoid functions derived from asymmetric ones M6: Sigmoid functions of the reciprocal independent variable M7: Embedding a sigmoid function into other function M8: Sum of sigmoid functions M9: Multiplication of sigmoid functions M10: Integral of the product of an increasing and a decreasing function M11: Derivation from lambda (bell-shaped) functions M12: Integration of lambda (bell-shaped) function M13: Integration of the sum of lambda (bell-shaped) functions M14: Integration of the product of two lambda (bell-shaped) functions M15: Integration of the difference of two shifted sigmoid functions M16: Integration of the product of two shifted sigmoid functions M17: Convolution of sigmoid functions M18: Integration of the product of lambda and sigmoid function M19: Solutions of ordinary differential equations M20: Solutions of partial differential equation (PDE) M21: Solutions of functional differential equation (FDE) M22: Sum of a sigmoid function and some derivatives M23: Combination of sigmoid functions, its derivative and integral M24: Filtering sigmoid functions M25: Special cases of Gauss hypergeometric functions M26: Feedback closed-loop systems M27: Recursive functions M28: Recursive time-delayed feed-forward loops M29: Solutions of stochastic differential equation M30: Chaotic sigmoid functions Consult reference for more details. == Definition == A sigmoid function is a bounded, differentiable, real function that is defined for all real input values and has a positive derivative at each point. == Properties == In general, a sigmoid function is monotonic, and has a first derivative which is bell shaped. Conversely, the integral of any continuous, non-negative, bell-shaped function (with one local maximum and no local minimum, unless degenerate) will be sigmoidal. Thus the cumulative distribution functions for many common probability distributions are sigmoidal. One such example is the error function, which is related to the cumulative distribution function of a normal distribution; another is the arctan function, which is related to the cumulative distribution function of a Cauchy distribution. A sigmoid function is constrained by a pair of horizontal asymptotes as x → ± ∞ {\displaystyle x\rightarrow \pm \infty } . A sigmoid function is convex for values less than a particular point, and it is concave for values greater than that point: in many of the examples here, that point is 0. == Examples == Logistic function f ( x ) = 1 1 + e − x {\displaystyle f(x)={\frac {1}{1+e^{-x}}}} Hyperbolic tangent (shifted and scaled version of the logistic function, above) f ( x ) = tanh ⁡ x = e x − e − x e x + e − x {\displaystyle f(x)=\tanh x={\frac {e^{x}-e^{-x}}{e^{x}+e^{-x}}}} Arctangent function f ( x ) = arctan ⁡ x {\displaystyle f(x)=\arctan x} Gudermannian function f ( x ) = gd ⁡ ( x ) = ∫ 0 x d t cosh ⁡ t = 2 arctan ⁡ ( tanh ⁡ ( x 2 ) ) {\displaystyle f(x)=\operatorname {gd} (x)=\int _{0}^{x}{\frac {dt}{\cosh t}}=2\arctan \left(\tanh \left({\frac {x}{2}}\right)\right)} Error function f ( x ) = erf ⁡ ( x ) = 2 π ∫ 0 x e − t 2 d t {\displaystyle f(x)=\operatorname {erf} (x)={\frac {2}{\sqrt {\pi }}}\int _{0}^{x}e^{-t^{2}}\,dt} Generalised logistic function f ( x ) = ( 1 + e − x ) − α , α > 0 {\displaystyle f(x)=\left(1+e^{-x}\right)^{-\alpha },\quad \alpha >0} Smoothstep function f ( x ) = { ( ∫ 0 1 ( 1 − u 2 ) N d u ) − 1 ∫ 0 x ( 1 − u 2 ) N d u , | x | ≤ 1 sgn ⁡ ( x ) | x | ≥ 1 N ∈ Z ≥ 1 {\displaystyle f(x)={\begin{cases}{\displaystyle \left(\int _{0}^{1}\left(1-u^{2}\right)^{N}du\right)^{-1}\int _{0}^{x}\left(1-u^{2}\right)^{N}\ du},&|x|\leq 1\\\\\operatorname {sgn}(x)&|x|\geq 1\\\end{cases}}\quad N\in \mathbb {Z} \geq 1} Some algebraic functions, for example f ( x ) = x 1 + x 2 {\displaystyle f(x)={\frac {x}{\sqrt {1+x^{2}}}}} and in a more general form f ( x ) = x ( 1 + | x | k ) 1 / k {\displaystyle f(x)={\frac {x}{\left(1+|x|^{k}\right)^{1/k}}}} Up to shifts and scaling, many sigmoids are special cases of f ( x ) = φ ( φ ( x , β ) , α ) , {\displaystyle f(x)=\varphi (\varphi (x,\beta ),\alpha ),} where φ ( x , λ ) = { ( 1 − λ x ) 1 / λ λ ≠ 0 e − x λ = 0 {\displaystyle \varphi (x,\lambda )={\begin{cases}(1-\lambda x)^{1/\lambda }&\lambda \neq 0\\e^{-x}&\lambda =0\\\end{cases}}} is the inverse of the negative Box–Cox transformation, and α < 1 {\displaystyle \alpha <1} and β < 1 {\displaystyle \beta <1} are shape parameters. Smooth transition function normalized to (−1,1): f ( x ) = { 2 1 + e − 2 m x 1 − x 2 − 1 , | x | < 1 sgn ⁡ ( x ) | x | ≥ 1 = { tanh ⁡ ( m x 1 − x 2 ) , | x | < 1 sgn ⁡ ( x ) | x | ≥ 1 {\displaystyle {\begin{aligned}f(x)&={\begin{cases}{\displaystyle {\frac {2}{1+e^{-2m{\frac {x}{1-x^{2}}}}}}-1},&|x|<1\\\\\operatorname {sgn}(x)&|x|\geq 1\\\end{cases}}\\&={\begin{cases}{\displaystyle \tanh \left(m{\frac {x}{1-x^{2}}}\right)},&|x|<1\\\\\operatorname {sgn}(x)&|x|\geq 1\\\end{cases}}\end{aligned}}} using the hyperbolic tangent mentioned above. Here, m {\displaystyle m} is a free parameter encoding the slope at x = 0 {\displaystyle x=0} , which must be great

  Read more →
• 

  Dendrogram

  A dendrogram is a diagram representing a tree graph. This diagrammatic representation is frequently used in different contexts: in hierarchical clustering, it illustrates the arrangement of the clusters produced by the corresponding analyses. in computational biology, it shows the clustering of genes or samples, sometimes in the margins of heatmaps. in phylogenetics, it displays the evolutionary relationships among various biological taxa. In this case, the dendrogram is also called a phylogenetic tree. The name dendrogram derives from the two ancient greek words δένδρον (déndron), meaning "tree", and γράμμα (grámma), meaning "drawing, mathematical figure". == Clustering example == For a clustering example, suppose that five taxa ( a {\displaystyle a} to e {\displaystyle e} ) have been clustered by UPGMA based on a matrix of genetic distances. The hierarchical clustering dendrogram would show a column of five nodes representing the initial data (here individual taxa), and the remaining nodes represent the clusters to which the data belong, with the arrows representing the distance (dissimilarity). The distance between merged clusters is monotone, increasing with the level of the merger: the height of each node in the plot is proportional to the value of the intergroup dissimilarity between its two daughters (the nodes on the right representing individual observations all plotted at zero height).

  Read more →
• 

  Line detection

  In image processing, line detection is an algorithm that takes a collection of n edge points and finds all the lines on which these edge points lie. The most popular line detectors are the Hough transform and convolution-based techniques. == Hough transform == The Hough transform can be used to detect lines and the output is a parametric description of the lines in an image, for example ρ = r cos(θ) + c sin(θ). If there is a line in a row and column based image space, it can be defined ρ, the distance from the origin to the line along a perpendicular to the line, and θ, the angle of the perpendicular projection from the origin to the line measured in degrees clockwise from the positive row axis. Therefore, a line in the image corresponds to a point in the Hough space. The Hough space for lines has therefore these two dimensions θ and ρ, and a line is represented by a single point corresponding to a unique set of these parameters. The Hough transform can then be implemented by choosing a set of values of ρ and θ to use. For each pixel (r, c) in the image, compute r cos(θ) + c sin(θ) for each values of θ, and place the result in the appropriate position in the (ρ, θ) array. At the end, the values of (ρ, θ) with the highest values in the array will correspond to strongest lines in the image == Convolution-based technique == In a convolution-based technique, the line detector operator consists of a convolution masks tuned to detect the presence of lines of a particular width n and a θ orientation. Here are the four convolution masks to detect horizontal, vertical, oblique (+45 degrees), and oblique (−45 degrees) lines in an image. a) Horizontal mask(R1) (b) Vertical (R3) (C) Oblique (+45 degrees)(R2) (d) Oblique (−45 degrees)(R4) In practice, masks are run over the image and the responses are combined given by the following equation: R(x, y) = max(|R1 (x, y)|, |R2 (x, y)|, |R3 (x, y)|, |R4 (x, y)|) If R(x, y) > T, then discontinuity As can be seen below, if mask is overlay on the image (horizontal line), multiply the coincident values, and sum all these results, the output will be the (convolved image). For example, (−1)(0)+(−1)(0)+(−1)(0) + (2)(1) +(2)(1)+(2)(1) + (−1)(0)+(−1)(0)+(−1)(0) = 6 pixels on the second row, second column in the (convolved image) starting from the upper left corner of the horizontal lines. page 82 == Example == These masks above are tuned for light lines against a dark background, and would give a big negative response to dark lines against a light background. == Code example == The code was used to detect only the vertical lines in an image using Matlab and the result is below. The original image is the one on the top and the result is below it. As can be seen on the picture on the right, only the vertical lines were detected

  Read more →
• 

  Evolutionary attractor

  An evolutionary attractor is a point in an evolutionary space where a selection process will always drive trait values towards that point from the region around it. Because of the importance of evolution through natural selection, often such an evolutionary space will be defined by genetic or phenotypic traits, or possibly both. In this case the selection process will be a form of natural selection. The existence of an evolutionary attractor in a biological evolutionary space does not always imply that it can be reached from all points in that evolutionary space, nor does it identify what will happen when the evolutionary attractor is reached. While an evolutionary attractor may represent a point in evolutionary space that is resistant to further selection, such as an evolutionarily stable strategy, other possibilities are available. Because identification of an evolutionary attractor on its own does not describe everything about the evolutionary space in which it lies, this has led to interest in the evolutionary dynamics surrounding evolutionary attractors and in evolutionary spaces in general. (Theoretical biologists and mathematicians working in the area may prefer the terms adaptive dynamics or evolutionary invasion analysis to evolutionary dynamics.) These fields use differential equations which allows a more complete understanding of the dynamics in evolutionary spaces including the existence or otherwise of evolutionary attractors. Advances in the study of molecular evolution have also led to the identification of evolutionary attractors at a molecular level. Because biological evolutionary processes have been studied using evolutionary game theory, a technique inspired by game theory originally derived to address economic problems, not only can evolutionary attractors be found in biology but economists studying evolutionary economic models have also identified evolutionary attractors. Evolution in biology has also inspired evolutionary computation in computer science. Many algorithms in this field use a form of selection inspired by natural selection to generate results through evolutionary algorithms. This is therefore another area in which evolutionary attractors have been identified. == Evolutionary attractors in biology == It is not probably not surprising that biology is the field where most examples of evolutionary attractors have been identified, given the importance of evolution through natural selection. === Evolutionary attractors in adaptive landscapes === An evolutionary attractor is a point in genetic and/or phenotypic trait space, that evolution will always drive trait values towards via a selection process. The concept of an evolutionary attractor arose in population genetics following the origin of the adaptive landscape originally proposed by Sewall Wright in 1932. The height of a point in an adaptive landscape is a measure of evolutionary fitness. If a point in an adaptive landscape is a peak, then selection will always drive traits towards it and it will be an evolutionary attractor. While population genetics deals with discrete genetic traits, quantitative genetics extended such concepts to deal with continuous genetic traits, where the concept of evolutionary attractor is also valid. === Evolutionary attractors in evolutionary game models === Evolutionary game theory introduced into evolutionary biology concepts originally used in economics, with the advantage that evolution could be studied in relation to strategic choices made in animal conflicts. This is of particular interest because of the concept of the evolutionarily stable strategy or ESS, a strategy that once established is resistant to invasion by other strategies. ESSs will not always be evolutionary attractors, but if they are they will persist over evolutionary time. === Dynamics around evolutionary attractors in biology === Evolutionary attractors in biology do not exist in isolation. By definition they must exist in an evolutionary trait space where selection drives all traits towards them from a region immediately around them. That is, they must be convergence stable. Eshel (1983) modified the definition of an ESS by considering individually advantageous reduction from a majority deviation: he created the term continuous stability. A continuously stable ESS can be shown to be convergence stable, therefore it will act as an evolutionary attractor. But the nature of evolutionary trait spaces in biology means that it is not possible to guarantee that the region of convergence to the evolutionary attractor covers the whole of the trait space, nor that there is only one evolutionary attractor in a particular trait space. These issues have led to the emergence of the related fields of evolutionary dynamics, adaptive dynamics and evolutionary invasion analysis, all of which use differential equations to understand the dynamics in evolutionary trait spaces. Hence, if one or more evolutionary attractor exists in an evolutionary trait space, they provide techniques to understand the dynamics in that trait space around the evolutionary attractor. === Evolutionary attractors in an ecological context === Evolution in biology does not take place in single species in isolation. Ecological interaction of species leads to coevolution. Important examples of this are host-parasite or host-pathogen interaction, which can make both the dynamics around evolutionary attractors more complex, and the occurrence and number of evolutionary attractors more diverse. Evolutionary attractors have been identified in the analysis of evolutionary epidemiology of plant pathogens. In the above study working on plant populations the authors were able to identify evolutionary attractors using methods from adaptive dynamics. A model applied to the analysis of a maize (Zea mays L.) virus identified convergence stable equilibria through simulation modelling. A related model identified evolutionary attractors in the interaction of plants with fungal pathogens. === Evolutionary attractors in molecular genetics === As mentioned above much of the consideration of evolutionary attractors in biology has been through investigation of selection at a genetic or phenotypic level or both, in a single species or in coevolving species. Advances in the study of molecular genetics now allow the study of evolutionary attractors to be taken to a molecular genetic level. Wilson et. al (2019) studied the evolution of gene regulatory networks and identified the emergence of evolutionary attractors. == Evolutionary attractors in economics == Evolutionary game theory as applied in biology was inspired by game theory originally devised for applications in economics. Game theory remains an active field of research outside of biology, and thus it is not surprising that researchers in evolutionary economics use evolutionary game theory. Evolutionary attractors have been demonstrated by economists studying the evolutionary dynamics of market entry with market dynamics based on the replicator dynamics of biological evolutionary games. == Evolutionary attractors in computing == Evolutionary computation is a branch of computer science inspired by biological evolution. Many algorithms in evolutionary computation use a form of selection. Thus evolutionary attractors have been identified in computer science as well as in biology and economics. Evolutionary algorithms have generated evolutionary attractors, probably because of the similarity between adaptive hill-climbing in evolutionary heuristics and the adaptive landscape originated to explain evolution through natural selection.

  Read more →
• 

  Bootstrap aggregating

  Bootstrap aggregating, also called bagging (from bootstrap aggregating) or bootstrapping, is a machine learning (ML) ensemble meta-algorithm designed to improve the stability and accuracy of ML classification and regression algorithms. It also reduces variance and overfitting. Although it is usually applied to decision tree methods, it can be used with any type of method. Bagging is a special case of the ensemble averaging approach. == Description of the technique == Given a standard training set D {\displaystyle D} of size n {\displaystyle n} , bagging generates m {\displaystyle m} new training sets D i {\displaystyle D_{i}} , each of size n ′ {\displaystyle n'} , by sampling from D {\displaystyle D} uniformly and with replacement. By sampling with replacement, some observations may be repeated in each D i {\displaystyle D_{i}} . If n ′ = n {\displaystyle n'=n} , then for large n {\displaystyle n} the set D i {\displaystyle D_{i}} is expected to have the fraction (1 - 1/e) (~63.2%) of the unique samples of D {\displaystyle D} , the rest being duplicates. This kind of sample is known as a bootstrap sample. Sampling with replacement ensures each bootstrap is independent from its peers, as it does not depend on previous chosen samples when sampling. Then, m {\displaystyle m} models are fitted using the above bootstrap samples and combined by averaging the output (for regression) or voting (for classification). Bagging leads to "improvements for unstable procedures", which include, for example, artificial neural networks, classification and regression trees, and subset selection in linear regression. Bagging was shown to improve preimage learning. On the other hand, it can mildly degrade the performance of stable methods such as k-nearest neighbors. == Process of the algorithm == === Key Terms === There are three types of datasets in bootstrap aggregating. These are the original, bootstrap, and out-of-bag datasets. Each section below will explain how each dataset is made except for the original dataset. The original dataset is whatever information is given. === Creating the bootstrap dataset === The bootstrap dataset is made by randomly picking objects from the original dataset. Also, it must be the same size as the original dataset. However, the difference is that the bootstrap dataset can have duplicate objects. Here is a simple example to demonstrate how it works along with the illustration below: Suppose the original dataset is a group of 12 people. Their names are Emily, Jessie, George, Constantine, Lexi, Theodore, John, James, Rachel, Anthony, Ellie, and Jamal. By randomly picking a group of names, let us say our bootstrap dataset had James, Ellie, Constantine, Lexi, John, Constantine, Theodore, Constantine, Anthony, Lexi, Constantine, and Theodore. In this case, the bootstrap sample contained four duplicates for Constantine, and two duplicates for Lexi, and Theodore. === Creating the out-of-bag dataset === The out-of-bag dataset represents the remaining people who were not in the bootstrap dataset. It can be calculated by taking the difference between the original and the bootstrap datasets. In this case, the remaining samples who were not selected are Emily, Jessie, George, Rachel, and Jamal. Keep in mind that since both datasets are sets, when taking the difference the duplicate names are ignored in the bootstrap dataset. The illustration below shows how the math is done: === Application === Creating the bootstrap and out-of-bag datasets is crucial since it is used to test the accuracy of ensemble learning algorithms like random forest. For example, a model that produces 50 trees using the bootstrap/out-of-bag datasets will have a better accuracy than if it produced 10 trees. Since the algorithm generates multiple trees and therefore multiple datasets the chance that an object is left out of the bootstrap dataset is low. The next few sections talk about how the random forest algorithm works in more detail. === Creation of Decision Trees === The next step of the algorithm involves the generation of decision trees from the bootstrapped dataset. To achieve this, the process examines each gene/feature and determines for how many samples the feature's presence or absence yields a positive or negative result. This information is then used to compute a confusion matrix, which lists the true positives, false positives, true negatives, and false negatives of the feature when used as a classifier. These features are then ranked according to various classification metrics based on their confusion matrices. Some common metrics include estimate of positive correctness (calculated by subtracting false positives from true positives), measure of "goodness", and information gain. These features are then used to partition the samples into two sets: those that possess the top feature, and those that do not. The diagram below shows a decision tree of depth two being used to classify data. For example, a data point that exhibits Feature 1, but not Feature 2, will be given a "No". Another point that does not exhibit Feature 1, but does exhibit Feature 3, will be given a "Yes". This process is repeated recursively for successive levels of the tree until the desired depth is reached. At the very bottom of the tree, samples that test positive for the final feature are generally classified as positive, while those that lack the feature are classified as negative. These trees are then used as predictors to classify new data. === Random Forests === The next part of the algorithm involves introducing yet another element of variability amongst the bootstrapped trees. In addition to each tree only examining a bootstrapped set of samples, only a small but consistent number of unique features are considered when ranking them as classifiers. This means that each tree only knows about the data pertaining to a small constant number of features, and a variable number of samples that is less than or equal to that of the original dataset. Consequently, the trees are more likely to return a wider array of answers, derived from more diverse knowledge. This results in a random forest, which possesses numerous benefits over a single decision tree generated without randomness. In a random forest, each tree "votes" on whether or not to classify a sample as positive based on its features. The sample is then classified based on majority vote. An example of this is given in the diagram below, where the four trees in a random forest vote on whether or not a patient with mutations A, B, F, and G has cancer. Since three out of four trees vote yes, the patient is then classified as cancer positive. Because of their properties, random forests are considered one of the most accurate data mining algorithms, are less likely to overfit their data, and run quickly and efficiently even for large datasets. They are primarily useful for classification as opposed to regression, which attempts to draw observed connections between statistical variables in a dataset. This makes random forests particularly useful in such fields as banking, healthcare, the stock market, and e-commerce where it is important to be able to predict future results based on past data. One of their applications would be as a useful tool for predicting cancer based on genetic factors, as seen in the above example. There are several important factors to consider when designing a random forest. If the trees in the random forests are too deep, overfitting can still occur due to over-specificity. If the forest is too large, the algorithm may become less efficient due to an increased runtime. Random forests also do not generally perform well when given sparse data with little variability. However, they still have numerous advantages over similar data classification algorithms such as neural networks, as they are much easier to interpret and generally require less data for training. As an integral component of random forests, bootstrap aggregating is very important to classification algorithms, and provides a critical element of variability that allows for increased accuracy when analyzing new data, as discussed below. == Improving Random Forests and Bagging == While the techniques described above utilize random forests and bagging (otherwise known as bootstrapping), there are certain techniques that can be used in order to improve their execution and voting time, their prediction accuracy, and their overall performance. The following are key steps in creating an efficient random forest: Specify the maximum depth of trees: Instead of allowing the random forest to continue until all nodes are pure, it is better to cut it off at a certain point in order to further decrease chances of overfitting. Prune the dataset: Using an extremely large dataset may create results that are less indicative of the data provided than a smaller set that more accurately represents what is being focused on. Continue pruning the data at each

  Read more →