AI Grammar Tester

AI Grammar Tester — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Data administration

Data administration or data resource management is an organizational function working in the areas of information systems and computer science that plans, organizes, describes and controls data resources. Data resources are usually stored in databases under a database management system or other software such as electronic spreadsheets. In many smaller organizations, data administration is performed occasionally, or is a small component of the database administrator’s work. In the context of information systems development, data administration ideally begins at system conception, ensuring there is a data dictionary to help maintain consistency, avoid redundancy, and model the database so as to make it logical and usable, by means of data modeling, including database normalization techniques. == Data resource management == According to the Data Management Association (DAMA), data resource management is "the development and execution of architectures, policies, practices and procedures that properly manage the full data lifecycle needs of an enterprise". Data Resource management may be thought of as a managerial activity that applies information system and other data management tools to the task of managing an organization’s data resource to meet a company’s business needs, and the information they provide to their shareholders. From the perspective of database design, it refers to the development and maintenance of data models to facilitate data sharing between different systems, particularly in a corporate context. Data Resource Management is also concerned with both data quality and compatibility between data models. Since the beginning of the information age, businesses need all types of data on their business activity. With each data created, when a business transaction is made, need data is created. With these data, new direction is needed that focuses on managing data as a critical resource of the organization to directly support its business activities. The data resource must be managed with the same intensity and formality that other critical resources are managed. Organizations must emphasize the information aspect of information technology, determine the data needed to support the business, and then use appropriate technology to build and maintain a high-quality data resource that provides that support. Data resource quality is a measure of how well the organization's data resource supports the current and the future business information demand of the organization. The data resource cannot support just the current business information demand while sacrificing the future business information demand. It must support both the current and the future business information demand. The ultimate data resource quality is stability across changing business needs and changing technology. A corporate data resource must be developed within single, organization-wide common data architecture. A data architecture is the science and method of designing and constructing a data resource that is business driven, based on real-world objects and events as perceived by the organization, and implemented into appropriate operating environments. It is the overall structure of a data resource that provides a consistent foundation across organizational boundaries to provide easily identifiable, readily available, high-quality data to support the business information demand. The common data architecture is a formal, comprehensive data architecture that provides a common context within which all data at an organization's disposal are understood and integrated. It is subject oriented, meaning that it is built from data subjects that represent business objects and business events in the real world that are of interest to the organization and about which data are captured and maintained.
Read more →
BeReal

BeReal (stylized on the app logo as BeReal.) is a French social-networking app released in 2020, developed by Alexis Barreyat and Kévin Perreau. Currently, it is owned by Voodoo. Its main feature is a daily notification that encourages users to share photos of themselves in their day-to-day life, on any randomly selected two-minute window every day. Critics noted its emphasis on authenticity, which some felt crossed the line into the mundane. The primary reference of its name relates to its focus on users uploading unpolished photos, with it being a pun of the term B-reel. According to the app's description on Apple's App Store, BeReal encourages its users to "show their friends who they really are, for once," by removing filters and opportunities to stage or edit photos. After a couple of years of relative obscurity, it rapidly gained popularity in early and mid-2022 growing from 21.6 million to 73.5 million users between July and August, before experiencing a decrease in use in 2023 and continuing to decline to 23 million users at the beginning of 2024. == History == The app was developed by Alexis Barreyat, a former employee at GoPro, and Kévin Perreau, a graduate from 42 in Paris. Initially released in 2020, it first gained widespread popularity in early 2022. It first spread widely on college campuses, partially due to a paid ambassador program. In late August 2022, the application had over 10 million active daily users and 21.6 million active monthly users. As of February 2023, the app has grown to 13 million active daily users and 47.8 million active monthly users. In June 2021, BeReal received a $30 million funding round led by Andreessen Horowitz and Accel. In May 2022, BeReal secured $85 million in a funding round led by Yuri Milner's DST Global, increasing its valuation to about $600 million. On July 25, 2022, BeReal topped Apple's free app list in the iOS App Store, and remained until September 2022. BeReal also received Apple's iPhone App of the Year in 2022. By late spring 2023, the app's momentum was waning, as daily users dropped to about 6 million, from 15 million in October 2022. In August 2024, there was a resurgence after a campaign at the Paris Olympics 2024, with the app reportedly gaining 1000 users. In June 2024, BeReal was acquired by the French company Voodoo for a reported €500 million. Alexis Barreyat is set to step down after a transition period. == Features == Once per day, BeReal notifies all users that a two-minute window to post is open. It asks users to create a post (known eponymously as a "BeReal") which, using mandatory simultaneous photos and now short videos from both the front and back cameras, provides a visual depiction of what they are doing at that moment, with an option to caption their post. The given window varies from day to day, and is not known to users before the notification is received. Once the daily notification is sent, users lose the ability to see others' BeReals from the previous day. Furthermore, users cannot see any of the current day's BeReals until they upload their own. On-time BeReals show the time it was uploaded, meanwhile, late BeReals uploaded after the two-minute window shows how late the BeReal was taken, but the user has to long-press the BeReal to reveal the time it was uploaded. Other users can also see how many attempts the poster took to take the BeReal, as well as their location when the BeReal was taken. Users only get one chance to delete their BeReal and post another one, and they used to not be able to post more than one at any time. However, in 2023, a feature was added that allowed users to post up to two extra BeReals on days when they posted their first BeReal within the 2-minute window. In July 2024, the number of bonus BeReals was increased to 5. [1] BeReal also features a "Discovery" section, wherein users are given the option to share to a much wider, public audience. This feature, however, is limited, as users are not able to interact with the posts through commenting—unlike the "My Friends" feature. In August 2023, in an attempt to make BeReal more social, another feature was added so that users are now able to see their friends of friends' BeReal. The app reportedly uses HiveAI to automate its image moderation process. However, there is also a report function that allows users to report a photo or another user if they are posting inappropriate content. === Comparison to other platforms === Because of its daily cycle of engagement, it has been compared to Wordle, which gained popularity earlier in 2022. It also supports a platform similar to Snapchat with a theme of impermanence and brevity. BeReal has been described as designed to compete with Instagram while simultaneously de-emphasising social media addiction and overuse. The app does not allow any photo filters or other editing, and has no follower counts. Marketing material from the company said that the app "can be addictive" and that "BeReal won't make you famous." Jacob Arnott, managing director of social agency We the People, describes BeReal as "an anti-Instagram" due to its raw and unedited nature. The app's foundation on friends rather than followers resembles Facebook's platform of adding friends, which comprise the content of a user's feed. This also resembles Instagram's "close friends" story feature. Further, rather than "liking" posts, BeReal uses "RealMojis" which involves taking a photo to interact with other posts. With the popularity of BeReal, other providers have launched similar features. In July 2022, Instagram launched a "Dual Camera" feature similar to BeReal, and in August 2022 it began testing a feature called "IG Candid Challenges", where users are prompted to post once a day within two minutes. As of September 2022, TikTok has also launched a feature called TikTok Now, following the same concept. In December 2022, similar to Spotify's "Wrapped," BeReal launched a feature involving a video of a compilation of users' BeReal posts of 2022. == User characteristics == BeReal is considered to be targeted towards Generation Z users, and attempts to minimise "social media fatigue", a feeling of numbness and disconnection from reality caused by constant interaction with an idealised version of others. This is a "core generational value" that this demographic holds compared to Millennials. Further, BeReal's users have been particularly strong across universities and university-aged students, and the majority of users are in the United States, the United Kingdom, and Germany. In 2022, the majority of users were female, with 43.2% of users falling within the age range of 16 to 25 and 55.1% of users being 26 to 44 years old. BeReal, the platform encourages users to share their real time moments by sending a daily notification that gives a least two minutes to post a unedited photo using bot the front and back camera, although users can post later and retake photos from when the notification happens, this action are still visible to friends, reinforcing transparency and genuine in the moment sharing. == Reception == Jason Koebler, a writer for Vice, wrote that in contrast to Instagram, which presents an unattainable view of people's lives, BeReal instead "makes everyone look extremely boring". Niklas Myhr, a professor of social media at Chapman University, argued that depth of engagement may determine whether the app is a passing trend or has "staying power". Kelsey Weekman, a reporter for BuzzFeed News, noted that the app's unwillingness to "glamorise the banality of life" made it feel "humbling" in its emphasis on authenticity. Niloufar Haidari for The Guardian comments similarly that where the app succeeds in being "drab" in perhaps a positive way, it fails in potentially "un-inspiring" users. Likewise, Dr. Brad Ridout, a behavioral psychologist at the University of Sydney, emphasizes that the "boring" experience is what the creators are targeting for the app and, in response to Instagram's platform of flawlessness, that "perfection is the enemy of happiness". === Criticisms === Some people regularly post after the two-minute notification expires, leading to some criticism of the app, as the ability to post late undermines its aims of authenticity. In addition, BeReal's daily two-minute window has been argued to contribute to social media fatigue and a need for self-exposure, as well as constant access to phones.
Read more →
AdBlock

AdBlock is an ad-blocking browser extension for Google Chrome, Apple Safari (desktop and mobile), Firefox, Samsung Internet, Microsoft Edge and Opera. AdBlock allows users to prevent page elements, such as advertisements, from being displayed. It is free to download and use, and it includes optional donations to the developers. The AdBlock extension was created on December 8, 2009, which is the day that supports for extensions was added to Google Chrome. It was one of the first Google Chrome extensions that was made. Since 2016, AdBlock has been based on the Adblock Plus source code. In July 2018, AdBlock acquired uBlock, a commercial ad-blocker owned by uBlock LLC and based on uBlock Origin. In April 2021, eyeo GmbH (developer of Adblock Plus) announced its purchase of AdBlock, Inc (formerly BetaFish, Inc). == Crowdfunding == Gundlach launched a crowdfunding campaign on Crowdtilt in August 2013 in order to fund an ad campaign to raise awareness of ad-blocking and to rent a billboard at Times Square. After the one-month campaign, it raised $55,000. == Sales and acceptable ads == AdBlock was sold to an anonymous buyer in 2015 and on October 15, 2015, Gundlach's name was taken down from the site. In the terms of the deal, the original developer Michael Gundlach left operations to Adblock's continuing director, Gabriel Cubbage, and as of October 2, 2015, AdBlock began participating in the Acceptable Ads program. Acceptable Ads identifies "non-annoying" ads, which AdBlock shows by default. The intent is to allow non-invasive advertising, to either maintain support for websites that rely on advertising as a main source of revenue or for websites that have an agreement with the program. == Filters == AdBlock uses EasyList, the same filter syntax as Adblock Plus for Firefox, and natively supports the use of a number of filter lists. == Partnership with Amnesty International == On March 12, 2016, in support of World Day Against Cyber Censorship, and in partnership with Amnesty International, instead of blocking ads, AdBlock replaced ads with banners linked to articles on Amnesty's website, written by prominent free speech advocates such as Edward Snowden, to raise awareness of government-imposed online censorship and digital privacy issues around the world. The campaign was met with both praise and criticism, with AdBlock's CEO, Gabriel Cubbage, defending the decision in an essay on AdBlock's website, saying "We’re showing you Amnesty banners, just for today, because we believe users should be part of the conversation about online privacy. Tomorrow, those spaces will be vacant again. But take a moment to consider that in an increasingly information-driven world, when your right to digital privacy is threatened, so is your right to free expression." Meanwhile, Simon Sharwood of The Register characterized Cubbage's position as "'You should control your computer except when we feel political', says AdBlock CEO". == AdBlock for Firefox == On September 13, 2014, the AdBlock team released a version for Firefox users, ported from the code for Google Chrome, released under the same free software license as the original Adblock. The extension was removed on April 2, 2015, by an administrator on Mozilla Add-ons. On December 7, 2015, the official AdBlock site's knowledge base article stated that with version 44 or higher of Firefox desktop and Firefox Mobile, AdBlock will not be supported. The last version of Adblock for those platforms will work on older versions of Firefox. AdBlock was released again on Mozilla Add-ons on November 17, 2016. On April 1, 2012, Adblock developer Michael Gundlach tweaked the code to display LOLcats instead of simply blocking ads. Initially developed as a short-lived April Fools joke, the response was so positive that CatBlock was continued to be offered as an optional add-on supported by a monthly subscription. On October 23, 2014, the developer decided to end official support for CatBlock, and made it open-source, under GPLv3 licensing, as the original extension.
Read more →
Image subtraction

Image subtraction or pixel subtraction or difference imaging is an image processing technique whereby the digital numeric value of one pixel or whole image is subtracted from another image, and a new image generated from the result. This is primarily done for one of two reasons – levelling uneven sections of an image such as half an image having a shadow on it, or detecting changes between two images. This method can show things in the image that have changed position, brightness, color, or shape. For this technique to work, the two images must first be spatially aligned to match features between them, and their photometric values and point spread functions must be made compatible, either by careful calibration, or by post-processing (using color mapping). The complexity of the pre-processing needed before differencing varies with the type of image, but is essential to ensure good subtraction of static features. This is commonly used in fields such as time-domain astronomy (known primarily as difference imaging) to find objects that fluctuate in brightness or move. In automated searches for asteroids or Kuiper belt objects, the target moves and will be in one place in one image, and in another place in a reference image made an hour or day later. Thus, image processing algorithms can make the fixed stars in the background disappear, leaving only the target. Distinct families of astronomical image subtraction techniques have emerged, operating in both image space or frequency space, with distinct trade-offs in both quality of subtraction and computational cost. These algorithms lie at the heart of almost all modern (and upcoming) transient surveys, and can enable the detection of even faint supernovae embedded in bright galaxies. Nevertheless, in astronomical imaging, significant 'residuals' remain around bright, complex sources, necessitating further algorithmic steps to identify candidates (known as real-bogus classification) The Hutchinson metric can be used to "measure of the discrepancy between two images for use in fractal image processing".
Read more →
Autonomic networking

Autonomic networking follows the concept of Autonomic Computing, an initiative started by IBM in 2001. Its ultimate aim is to create self-managing networks to overcome the rapidly growing complexity of the Internet and other networks and to enable their further growth, far beyond the size of today. == Increasing size and complexity == The ever-growing management complexity of the Internet caused by its rapid growth is seen by some experts as a major problem that limits its usability in the future. What's more, increasingly popular smartphones, PDAs, networked audio and video equipment, and game consoles need to be interconnected. Pervasive Computing not only adds features, but also burdens existing networking infrastructure with more and more tasks that sooner or later will not be manageable by human intervention alone. Another important aspect is the price of manually controlling huge numbers of vitally important devices of current network infrastructures. == Autonomic nervous system == The autonomic nervous system (ANS) is the part of complex biological nervous systems that is not consciously controlled. It regulates bodily functions and the activity of specific organs. As proposed by IBM, future communication systems might be designed in a similar way to the ANS. == Components of autonomic networking == As autonomics conceptually derives from biological entities such as the human autonomic nervous system, each of the areas can be metaphorically related to functional and structural aspects of a living being. In the human body, the autonomic system facilitates and regulates a variety of functions including respiration, blood pressure and circulation, and emotive response. The autonomic nervous system is the interconnecting fabric that supports feedback loops between internal states and various sources by which internal and external conditions are monitored. === Autognostics === Autognostics includes a range of self-discovery, awareness, and analysis capabilities that provide the autonomic system with a view on high-level state. In metaphor, this represents the perceptual sub-systems that gather, analyze, and report on internal and external states and conditions – for example, this might be viewed as the eyes, visual cortex and perceptual organs of the system. Autognostics, or literally "self-knowledge", provides the autonomic system with a basis for response and validation. A rich autognostic capability may include many different "perceptual senses". For example, the human body gathers information via the usual five senses, the so-called sixth sense of proprioception (sense of body position and orientation), and through emotive states that represent the gross wellness of the body. As conditions and states change, they are detected by the sensory monitors and provide the basis for adaptation of related systems. Implicit in such a system are imbedded models of both internal and external environments such that relative value can be assigned to any perceived state - perceived physical threat (e.g. a snake) can result in rapid shallow breathing related to fight-flight response, a phylogenetically effective model of interaction with recognizable threats. In the case of autonomic networking, the state of the network may be defined by inputs from: individual network elements such as switches and network interfaces including specification and configuration historical records and current state traffic flows end-hosts application performance data logical diagrams and design specifications Most of these sources represent relatively raw and unprocessed views that have limited relevance. Post-processing and various forms of analysis must be applied to generate meaningful measurements and assessments against which current state can be derived. The autognostic system interoperates with: configuration management - to control network elements and interfaces policy management - to define performance objectives and constraints autodefense - to identify attacks and accommodate the impact of defensive responses === Configuration management === Configuration management is responsible for the interaction with network elements and interfaces. It includes an accounting capability with historical perspective that provides for the tracking of configurations over time, with respect to various circumstances. In the biological metaphor, these are the hands and, to some degree, the memory of the autonomic system. On a network, remediation and provisioning are applied via configuration setting of specific devices. Implementation affecting access and selective performance with respect to role and relationship are also applied. Almost all the "actions" that are currently taken by human engineers fall under this area. With only a few exceptions, interfaces are set by hand, or by extension of the hand, through automated scripts. Implicit in the configuration process is the maintenance of a dynamic population of devices under management, a historical record of changes and the directives which invoked change. Typical to many accounting functions, configuration management should be capable of operating on devices and then rolling back changes to recover previous configurations. Where change may lead to unrecoverable states, the sub-system should be able to qualify the consequences of changes prior to issuing them. As directives for change must originate from other sub-systems, the shared language for such directives must be abstracted from the details of the devices involved. The configuration management sub-system must be able to translate unambiguously between directives and hard actions or to be able to signal the need for further detail on a directive. An inferential capacity may be appropriate to support sufficient flexibility (i.e. configuration never takes place because there is no unique one-to-one mapping between directive and configuration settings). Where standards are not sufficient, a learning capacity may also be required to acquire new knowledge of devices and their configuration. Configuration management interoperates with all of the other sub-systems including: autognostics - receives direction for and validation of changes policy management - implements policy models through mapping to underlying resources security - applies access and authorization constraints for particular policy targets autodefense - receives direction for changes === Policy management === Policy management includes policy specification, deployment, reasoning over policies, updating and maintaining policies, and enforcement. Policy-based management is required for: constraining different kinds of behavior including security, privacy, resource access, and collaboration configuration management describing business processes and defining performance defining role and relationship, and establishing trust and reputation It provides the models of environment and behavior that represent effective interaction according to specific goals. In the human nervous system metaphor, these models are implicit in the evolutionary "design" of biological entities and specific to the goals of survival and procreation. Definition of what constitutes a policy is necessary to consider what is involved in managing it. A relatively flexible and abstract framework of values, relationships, roles, interactions, resources, and other components of the network environment is required. This sub-system extends far beyond the physical network to the applications in use and the processes and end-users that employ the network to achieve specific goals. It must express the relative values of various resources, outcomes, and processes and include a basis for assessing states and conditions. Unless embodied in some system outside the autonomic network or implicit to the specific policy implementation, the framework must also accommodate the definition of process, objectives and goals. Business process definitions and descriptions are then an integral part of the policy implementation. Further, as policy management represents the ultimate basis for the operation of the autonomic system, it must be able to report on its operation with respect to the details of its implementation. The policy management sub-system interoperates (at least) indirectly with all other sub-systems but primarily interacts with: autognostics - providing the definition of performance and accepting reports on conditions configuration management - providing constraints on device configuration security - providing definitions of roles, access and permissions === Autodefense === Autodefense represents a dynamic and adaptive mechanism that responds to malicious and intentional attacks on the network infrastructure, or use of the network infrastructure to attack IT resources. As defensive measures tend to impede the operation of IT, it is optimally capable of balancing performance objectives with typically over-riding threat management actions. In the
Read more →
Apptek

Applications Technology (AppTek) is a U.S. company headquartered in McLean, Virginia that specializes in artificial intelligence and machine learning for human language technologies. The company provides both managed and professional services for natural language processing (NLP) technologies including automatic speech recognition (ASR), neural machine translation (MT), natural-language understanding (NLU) and neural speech synthesis. AppTek's Head of Science, Prof. Dr. -Ing Hermann Ney, was awarded the IEEE James L. Flanagan Speech and Audio Processing Award in 2019 and the ISCA Medal for Scientific Achievement in 2021 for his work in natural language processing. == History == AppTek was acquired in 1998 by Lernout & Hauspie (at the time a NASDAQ publicly traded company), AppTek organized a management buy-out and went private again in 2001. In 2014, the company sold its hybrid machine translation technology to eBay and has since rebuilt the platform to modern neural-based approaches for machine translation. In 2020, SOSi acquired non-controlling interest in AppTek and became an exclusive reseller of AppTek products for U.S. federal, state, and local government entities.
Read more →
Logogen model

The logogen model of 1969 is a model of speech recognition that uses units called "logogens" to explain how humans comprehend spoken or written words. Logogens are a vast number of specialized recognition units, each able to recognize one specific word. This model provides for the effects of context on word recognition. == Overview == The word logogen can be traced back to the Greek-language word logos, which means "word", and genus, which means "birth". British scientist John Morton's logogen model was designed to explain word recognition using a new type of unit known as a logogen. A critical element of this theory is the involvement of lexicons, or specialized aspects of memory that include semantic and phonemic information about each item that is contained in memory. A given lexicon consists of many smaller, abstract items known as logogens. Logogens contain a variety of properties about given word such as their appearance, sound, and meaning. Logogens do not store words within themselves, but rather they store information that is specifically necessary for retrieval of whatever word is being searched for. A given logogen will become activated by psychological stimuli or contextual information (words) that is consistent with the properties of that specific logogen and when the logogen's activation level rises to or above its threshold level, the pronunciation of the given word is sent to the output system. Certain stimuli can affect the activation levels of more than one word at a time, usually involving words that are similar to one another. When this occurs, whichever of the words' activation levels reaches the threshold level, it is that word that is then sent to the output system with the subject remaining unaware of any partially excited logogens. This assumption was made by Marslen-Wilson and Welch (1978), who added to the model some assumptions of their own in order to account for their experimental results. They also assumed that the analysis of phonetic input can only become available to other parts of the system by process of how the input affects the logogen system. Finally, Marslen-Wilson and Welch assume that the first syllable of a given word will increase the activation level of a given logogen more than those of the latter syllables, which supported the data found at the time. == Analysis == The logogen model can be used to help linguists explain particular occurrences in the human language. The most-helpful application of the model is to show how one accesses words and their meanings in the lexicon. The word-frequency effect is best explained by the logogen model in that words (or logogens) that have a higher frequency (or are more common) have a lower threshold. This means that they require less perceptual power in the brain to be recognized and decoded from the lexicon and are recognized faster than those words that are less common. Also, with high-frequency words, the recovery from lowering the item's threshold is less fulfilled compared to low-frequency words so less sensory information is needed for that particular item's recognition. There are ways to lower thresholds, such as repetition and semantic priming. Also, each time a word is encountered through these methods, the threshold for that word is temporarily lowered partially because of its recovering ability. This model also conveys that specific concrete words are recalled better because they use images and logogens, whereas abstract words are not as easily recalled well because they only use logogens, hence showing the difference in thresholds between these two types of words. At the time of its conception, Morton's logogen model was one of the most influential models in springing up other parallel word access models and served as the essential basis for these subsequent models. Morton's model also strongly influenced other contemporary theories on lexical access. However, despite the advantages that the logogen theory presents, it also displays some negative facets. First and foremost, the logogen model does not explain all occurrences in language, such as the introduction of new words or non-words into a person's lexicon. Also, because of the distinctive model application, it may vary in its effectiveness in different languages. == Criticisms == While this model does a reasonable job of understanding the underlying semantics of many aspects in psycholinguistics, there are some flaws that have been pointed out in the logogen model. It has been argued that the prior stimulus patterns that have been seen in the logogen theory are not centrally localized in the logogen itself but are actually distributed throughout the different pathways over which the stimulus is being processed. What this directs at is that the notion and proliferation of logogens was due to modality. In essence, the logogen is unnecessary in the idea of attaining the title of being a recognition unit because of the variety of pathways that it is open to, not just logogens. Another criticism has been that this model essentially ignores larger and more critical structures in language and phonetics such as the different syntactic rules or grammatical construction that innately exists in language. Since this model overtly limits itself to the scope of lexical access then this model is seen as biased and misunderstood. To many psychologists, the logogen model does not meet the functional or representational adequacy that a theory should include to sufficiently comprehend language. Also, another criticism is that the logogen theory was supposed to predict that stimulus degradation should affect priming and word frequency in humans. However, many psychologists have conducted studies and researched the model to show that only priming and not word frequency is interacted with stimulus degradation. Priming is supposed to deteriorate a stimulus because it postulates that the semantic characteristics of previously known words are fed back into the detector of a person which in turn raises the threshold of related items. In word frequency, stimulus degradation is supposed to occur because it postulates that familiar words have lower thresholds than their low-frequency counterparts. However, in studies, priming is the only structure that does show observable and notable stimulus decadence. Even though the logogen theory has many unfilled holes, Morton was a revolutionary of his field whose speculation and research has opened up a remarkable era of psycholinguistics. == Other models to consider == cohort model – This model was proposed by Marslen-Wilson and was designed specifically to account for auditory word recognition. It works by breaking the word down and states that when a word is heard all words that begin with the first sound of the target word are activated. This set of words is considered the cohort. Once the first cohort has been activated, the other information, or sounds in the word narrow down the choices. The person recognizes the word when you are left with a single choice; this is considered the "recognition point". checking model – This model was developed by Norris in 1986. In this particular model, he took the approach that any word that partially matches the input is analyzed and checked to see if it fits with the context of the situation. interactive-activation model – This model is considered a connectionist model. Proposed by McClelland and Rumelhart in the 1981 to 1982 period, it is based around nodes, which are visual features, and positions of letters within a given word. They also act as word detectors which have inhibitory and excitatory connections between them. This model starts with first letter and suggests that all the words with that first letter are activated at first and then going through the word one can determine what the word is they are looking at. The main principle is that mental phenomena can be described by interconnected networks of simple units. verification model – The model was developed by Curtis Becker in 1970. The main idea is that a small number of candidates that are activated in parallel are subject to a serial-verification process. This model starts the word-recognition process with a basic representation of the stimulus. Then, sensory trace, consisting of line features is used to activate word detectors. When an acceptable number of detectors are activated these are used to generate a search set. These items are drawn from the lexicon on the basis of similarity to the sensory trace, which help with the identity of the stimulus. Then, in a serial process the candidates are compared to the representation of the sensory-trace input. == Related concepts == word frequency – This is the belief that the speed and accuracy with which a word is recognized is related to how frequently the word occurs in our language. Each logogen has a threshold (for identification) and words with higher frequencies have lower thresholds. Words with higher freq
Read more →
PCPaint

PCPaint was one of the first IBM PC-based mouse-driven GUI paint programs, released in 1984. It followed after Microsoft Doodle, released in 1983 with the Microsoft Mouse version 1 drivers for DOS, and around the same time as Digital Research’s Draw program. It was developed and created by John Bridges and Doug Wolfgram. It was later developed into Pictor Paint. The hardware manufacturer Mouse Systems bundled PCPaint with millions of computer mice that they sold, making PCPaint one of the best-selling DOS-based paint programs of the mid 1980s. == History == In 1983, Doug Wolfgram bought a Microsoft Mouse and decided to write a drawing program for it. They named it “Mouse Draw”. The interface was primitive but the program functioned well. Wolfgram traveled to SoftCon in New Orleans where he demonstrated the program to Mouse Systems. Mouse Systems was developing an optical mouse and they wanted to bundle a painting program so they agreed to publish Mouse Draw. The original program was written entirely in assembly language with primitive graphics routines developed by Wolfgram. John Bridges worked for an educational software company, Classroom Consortia Media, Inc., developing and writing Apple and IBM graphics libraries for CCM's software. Bridges and Wolfgram were friends who had been connected through a bulletin board system developed and run by Wolfgram. The two collaborated cross country via the BBS, Wolfram in California and Bridges in New York. Mouse Systems wanted the paint program to capture the look and feel of MacPaint. John Bridges and Doug Wolfgram started reworking Mouse Draw into what became PCPaint. The program was completely re-written using Bridge's graphics library and the top-level elements were written in C rather than assembly language. Bridges developed the core graphics code for the first version of PCPaint while Wolfgram worked on the user interface and top-level code. Mouse Systems signed an exclusive agreement with Wolfgram's company, Microtex Industries, Inc., to bundle PCPaint with every mouse they sold. They began publishing PCPaint with their mice in 1984. Microsoft responded in 1985 by bundling a competing product, PC Paintbrush, with version 4 of its DOS drivers for the Microsoft Mouse, replacing its in-house Microsoft Doodle program which it published with version 1 of the DOS drivers in mid-1983. Microsoft’s mouse began to outsell Mouse Systems mouse. In November 1985 Microsoft bundled a cut-down version of PC Paintbrush with Windows 1.0 (called Microsoft Paint), later bundling an updated version of PC Paintbrush with Windows 3.0 (as Paintbrush), impacting PCPaint’s marketshare. In early 1987, Mouse Systems decided that PCPaint wasn't helping to sell mice any longer so they discontinued the bundle deal and returned rights to the code to MicroTex Industries, but retained rights to the name, PCPaint. Wolfgram then combined the paint program with a new animation system he was developing (called GRASP) and Paul Mace Software bought publishing rights to the animation system and PCPaint, which was to be renamed Pictor. Bridges again got involved and took over programming responsibilities for GRASP as well as PCPaint while Wolfgram focused on more of the business details. In creating the first version of PCPaint, Doug had a dual-floppy machine with a Computer Innovations compiler on one disk and source code on the other. John had the "luxury" of a 10MB hard disk in his XT. Data was exchanged daily via 1200, then 2400 baud modems. === Authorship and Ownership === John Bridges and Wolfgram continued to work on PCPaint and GRASP on behalf of Paul Mace Software until 1990. Also in that year, Doug Wolfgram sold his remaining rights to PCPaint (and its animation system, GRASP) to John Bridges. In 1994, GRASP development stopped and so did development of Pictor Paint. John Bridges terminated his GRASP publishing contract with Paul Mace Software, and went off to create GLPro (the next generation of GRASP) with GMEDIA. Along with GLPro, came GLPaint, the successor to PCPaint and Pictor Paint. == Versions == In June 1984, Mouse Systems shipped PCPaint 1.0, the first GUI based Paint program for the IBM PC family of computers. John Bridges and Doug Wolfgram, were the co-authors of PCPaint 1.0. PCPaint 1.0 saved its graphics in a modified BSaved image format with the extension of ".PIC". The release of PCPaint Version 1.5 followed in late 1984, with the additions of graphics image compression for the .PIC format and support for "larger-than-screen" images. PCjr support was also added in this version after overcoming severe memory shortage problems getting PCPaint to run on the 128k PCjr. October 1985 saw the release of PCPaint 2.0. EGA support and publishing features were added to this version. The .PIC format was further refined, offering support for the rapidly expanding graphics capabilities of the PC and efficient image compression. PCPaint 3.1 was released in 1989. Unlike previous versions, it was not bundled with mice but was sold as a stand-alone software product. PCPaint 3.1 offered improved text and image handling, provided 36 types of flood and fill, worked with VGA adapters in hi-res 16-color and 256-color modes, allowed the user to save and retrieve files in a variety of intercompatible formats (.PIC, .GIF, .PCX, .IMG), and printed selected portions of images on color or black-and-white dot matrix, ink jet, and laser printers such as PostScript and HP Laser Jet. PCPaint 3.1 is still in use today by some users of DOS emulation programs like DOSBox and available for free download. Pictor Paint was an improved version, written by John Bridges, and bundled with GRASP GRaphical System for Presentation also written by John Bridges. It was also called "The Painter's Easel". GLPaint, released in 1995, was the last in this series of paint programs written by John Bridges. By 1998 version 7.0 provided support for TrueColor images and the Pictor PIC format was expanded to handle these. == Pictor PIC Image Format == PCPaint 1.0 saved its graphics in a modified BSAVE image format (which was popular at the time) with the file type (extension) of ".PIC". By PCPaint 1.5 this format was extended further to accommodate image compression. With the release of version 2.0 the PICtor PIC image format was developed almost to its present state, with no similarity to the BSAVE format used by earlier versions. Pictor Paint saved its files in a compressed format with the file extension PIC, which was the same format used by PCPaint.
Read more →
SUPS

In computational neuroscience, SUPS (for Synaptic Updates Per Second) or formerly CUPS (Connections Updates Per Second) is a measure of a neuronal network performance, useful in fields of neuroscience, cognitive science, artificial intelligence, and computer science. == Computing == For a processor or computer designed to simulate a neural network SUPS is measured as the product of simulated neurons N {\displaystyle N} and average connectivity c {\displaystyle c} (synapses) per neuron per second: S U P S = c × N {\displaystyle SUPS=c\times N} Depending on the type of simulation it is usually equal to the total number of synapses simulated. In an "asynchronous" dynamic simulation if a neuron spikes at υ {\displaystyle \upsilon } Hz, the average rate of synaptic updates provoked by the activity of that neuron is υ c N {\displaystyle \upsilon cN} . In a synchronous simulation with step Δ t {\displaystyle \Delta t} the number of synaptic updates per second would be c N Δ t {\displaystyle {\frac {cN}{\Delta t}}} . As Δ t {\displaystyle \Delta t} has to be chosen much smaller than the average interval between two successive afferent spikes, which implies Δ t < 1 υ N {\displaystyle \Delta t<{\frac {1}{\upsilon N}}} , giving an average of synaptic updates equal to υ c N 2 {\displaystyle \upsilon cN^{2}} . Therefore, spike-driven synaptic dynamics leads to a linear scaling of computational complexity O(N) per neuron, compared with the O(N2) in the "synchronous" case. == Records == Developed in the 1980s Adaptive Solutions' CNAPS-1064 Digital Parallel Processor chip is a full neural network (NNW). It was designed as a coprocessor to a host and has 64 sub-processors arranged in a 1D array and operating in a SIMD mode. Each sub-processor can emulate one or more neurons and multiple chips can be grouped together. At 25 MHz it is capable of 1.28 GMAC. After the presentation of the RN-100 (12 MHz) single neuron chip at Seattle 1991 Ricoh developed the multi-neuron chip RN-200. It had 16 neurons and 16 synapses per neuron. The chip has on-chip learning ability using a proprietary backdrop algorithm. It came in a 257-pin PGA encapsulation and drew 3.0 W at a maximum. It was capable of 3 GCPS (1 GCPS at 32 MHz). In 1991–97, Siemens developed the MA-16 chip, SYNAPSE-1 and SYNAPSE-3 Neurocomputer. The MA-16 was a fast matrix-matrix multiplier that can be combined to form systolic arrays. It could process 4 patterns of 16 elements each (16-bit), with 16 neuron values (16-bit) at a rate of 800 MMAC or 400 MCPS at 50 MHz. The SYNAPSE3-PC PCI card contained 2 MA-16 with a peak performance of 2560 MOPS (1.28 GMAC); 7160 MOPS (3.58 GMAC) when using three boards. In 2013, the K computer was used to simulate a neural network of 1.73 billion neurons with a total of 10.4 trillion synapses (1% of the human brain). The simulation ran for 40 minutes to simulate 1 s of brain activity at a normal activity level (4.4 on average). The simulation required 1 Petabyte of storage.
Read more →
DexNet

Dex-net is a robotic. It uses a Grasp Quality Convolutional Neural Network to learn how to grasp unusually shaped objects. == History == Dex-net was developed by University of California, Berkeley professor Ken Goldberg and graduate student Jeff Mahler. == Design == Dex-net includes a high-resolution 3-D sensor and two arms, each controlled by a different neural network. One arm is equipped with a conventional robot gripper and another with a suction system. The robot’s software scans an object and then asks both neural networks to decide, on the fly, whether to grab or suck a particular object. It runs on an off-the-shelf industrial machine made by Swiss robotics company ABB. The software learns by attempting to pick up objects in a virtual environment. Dex-Net can generalize from an object it has seen before to a new one. The robot can "nudge" such virtual objects to examine if it is unsure how to grasp them. The trial data set was 6.7 million point clouds, grasps and analytic grasp metrics generated from thousands of 3D models. Grasps are defined as a gripper's planar position, angle and depth relative to an RGB-D sensor. == Mean picks per hour == A metric called mean picks per hour (MPPH) is calculated by multiplying the average time per pick and the average probability of success for a specific set of objects. The new metric allows labs working on picking robots to compare their results. Humans are capable of between 400 and 600 MPPH. In a contest organized by Amazon recently, the best robots were capable of between 70 and 95. Dex-net has achieved 200 to 300.
Read more →
Video browsing

Video browsing, also known as exploratory video search, is the interactive process of skimming through video content in order to satisfy some information need or to interactively check if the video content is relevant. While originally proposed to help users inspecting a single video through visual thumbnails, modern video browsing tools enable users to quickly find desired information in a video archive by iterative human–computer interaction through an exploratory search approach. Many of these tools presume a smart user that wants features to interactively inspect video content, as well as automatic content filtering features. For that purpose, several video interaction features are usually provided, such as sophisticated navigation in video or search by a content-based query. Video browsing tools often build on lower-level video content analysis, such as shot transition detection, keyframe extraction, semantic concept detection, and create a structured content overview of the video file or video archive. Furthermore, they usually provide sophisticated navigation features, such as advanced timelines, visual seeker bars or a list of selected thumbnails, as well as means for content querying. Examples of content queries are shot filtering through visual concepts (e.g., only shots showing cars), through some specific characteristics (e.g., color or motion filtering), through user-provided sketches (e.g., a visually drawn sketch), or through content-based similarity search. == History == Video browsing was originally proposed by Iranian engineer Farshid Arman, Taiwanese computer scientist Arding Hsu, and computer scientist Ming-Yee Chiu, while working at Siemens, and it was presented at the ACM International Conference in August 1993. They described a shot detection algorithm for compressed video that was originally encoded with discrete cosine transform (DCT) video coding standards such as JPEG, MPEG and H.26x. The basic idea was that, since the DCT coefficients are mathematically related to the spatial domain and represent the content of each frame, they can be used to detect the differences between video frames. In the algorithm, a subset of blocks in a frame and a subset of DCT coefficients for each block are used as motion vector representation for the frame. By operating on compressed DCT representations, the algorithm significantly reduces the computational requirements for decompression and enables effective video browsing. The algorithm represents separate shots of a video sequence by an r-frame, a thumbnail of the shot framed by a motion tracking region. A variation of this concept was later adopted for QBIC video content mosaics, where each r-frame is a salient still from the shot it represents. === Video Notebook === Modern video browsing solutions include Video Notebook, a Menlo Park startup founded in 2021 by Mike Lanza, which uses computer vision to extract slides and optical character recognition and speech recognition to facilitate video search. The software can be either used on the client side (using a browser extension), where the slides and text are extracted while the video is watched (e.g. on a video platform like YouTube or Udemy), or on the server side. Processed videos, which can be viewed in the Video Notebook web app, feature a video browsing user interface with extracted timestamped slides, a search bar for querying the video (or a collection of videos), and text chapters. Video Notebook customers include organisations like Ernst & Young. === Video Browser Showdown === The Video Browser Showdown (VBS) is an annual live evaluation competition for exploratory video search tools, where international researchers use video browsing tools to solve ad-hoc video search tasks on a moderately large data set as fast as possible. The main goal of the VBS, which started in 2012 at the International Conference on MultiMedia Modeling (MMM), is to advance the performance of video browsing tools. Since 2016, the VBS also collaborates with TRECVID. The aim of the VBS is to evaluate video browsing tools for efficiency at known-item search (KIS) tasks with a well-defined data set in direct comparison to other tools.
Read more →
Smart environment

Smart environments link computers and other smart devices to everyday settings and tasks. Smart environments include smart homes, smart cities, and smart manufacturing. == Introduction == Smart environments are an extension of pervasive computing. According to Mark Weiser, pervasive computing promotes the idea of a world that is connected to sensors and computers. These sensors and computers are integrated with everyday objects in peoples' lives and are connected through networks. == Definition == Cook and Das, define a smart environment as "a small world where different kinds of smart devices are continuously working to make inhabitants' lives more comfortable." Smart environments aim to satisfy the experience of individuals from every environment, by replacing hazardous work, physical labor, and repetitive tasks with automated agents. Poslad differentiates three different kinds of smart environments for systems, services, and devices: virtual (or distributed) computing environments, physical environments, and human environments, or a hybrid combination of these: Virtual computing environments enable smart devices to access pertinent services anywhere and anytime. Physical environments may be embedded with various smart devices of different types including tags, sensors, and controllers, and have different form factors ranging from nano- to micro- to macro-sized. Human environments: humans, either individually or collectively, inherently form a smart environment for devices. However, humans themselves may be accompanied by smart devices such as mobile phones, use surface-mounted devices (wearable computing), and contain embedded devices (e.g., pacemakers to maintain a healthy heart operation or AR contact lenses) == Features == Smart environments encompass a range of features and services across various domains, including smart homes, smart cities, smart health, and smart factories. Some of the key features of smart environments are: Sensors and Actuators: Smart environments are equipped with an assembly of sensors and actuators that collect data and initiate actions to provide services for the betterment of human life. Interconnected Systems: These environments consist of interconnected systems that enable seamless communication and coordination among various devices and components. Data-Driven Technologies: Smart environments leverage data-driven technologies, such as the Internet of Things (IoT), to obtain information from the physical world, process it, and perform actions accordingly. Efficiency and Sustainability: They are designed to improve efficiency, sustainable practices, and resource management across different settings, such as energy efficiency in smart homes and environmental quality management in smart cities. Diverse Requirements: Different types of smart environments have diverse requirements and technology choices, influencing the processing and utilization of data within a specific environment. == Technologies == Building a smart environment involves technologies of Wireless communication Algorithm design, signal prediction & classification, information theory Multilayered software architecture, Corba, middleware Speech recognition Image processing, image recognition Sensors design, calibration, motion detection, temperature, pressure sensors, accelerometers Semantic Web and knowledge graphs Adaptive control, Kalman filters Computer networking Parallel processing Operating systems == Existing projects == The Aware Home Research Initiative at Georgia Tech "is devoted to the multidisciplinary exploration of emerging technologies and services based in the home" and was launched in 1998 as one of the first "living laboratories." The Mav Home (Managing an Adaptive Versatile Home) project, at UT Arlington, is a smart environment-lab with state-of-the-art algorithms and protocols used to provide a customized, personal environment to the users of this space. The Mav Home project, in addition to providing a safe environment, wants to reduce the energy consumption of the inhabitants. Other projects include House at the MIT Media Lab and many others.
Read more →
List of Go software and tools

This is a list of Go software and tools, including compilers, development environments, build tools, testing frameworks, web frameworks, database tools, and related software for the Go programming language. == Core toolchain == Go — programming language and toolchain go command — build and package tool gofmt — source code formatter go vet — static analysis tool == Compilers and runtimes == gc — default Go compiler gccgo — GCC front end for Go GopherJS — Go-to-JavaScript compiler gollvm — Go compiler using the LLVM backend llgo — experimental Go frontend for LLVM TinyGo — compiler for embedded systems and WebAssembly Yaegi — Go interpreter == Development environments and editors == Emacs — text editor with Go support GoLand — JetBrains integrated development environment LiteIDE — Go-focused integrated development environment Neovim — text editor with Go support TextMate — text editor with Go support Vim — text editor with Go support Visual Studio Code — editor with Go support == Language servers and editor tools == delve — debugger gopls — Go language server golangci-lint — lint runner revive — linter staticcheck — static analysis tool == Build, dependency and release tools == Air — live reload development tool dep — deprecated dependency manager Go modules — dependency management system Goreleaser — release automation tool Mage — build tool Task — task runner == Testing and benchmarking == benchstat — benchmark comparison tool Ginkgo — testing framework GoMock — mock generation tool testify — testing toolkit testing — standard testing package == Web frameworks and HTTP tools == Beego — web framework Caddy — web server Chi — router Echo — web framework Fiber — web framework Gin — web framework Gorilla Mux — router Hugo — static site generator Revel — web framework Traefik — reverse proxy and load balancer == RPC and API tools == Goa — API design framework gRPC — remote procedure call framework grpc-gateway — REST gateway oapi-codegen — OpenAPI code generator Swag — OpenAPI documentation tool == Database and ORM tools == Bun — SQL toolkit and ORM CockroachDB client libraries — database drivers and tools ent — entity framework GORM — object–relational mapper sqlx — SQL toolkit == Command-line and terminal tools == Bubble Tea — terminal user interface framework Cobra — command-line framework pflag — flag parsing library urfave/cli — command-line framework Viper — configuration library == GUI toolkits and application frameworks == Fyne — cross-platform graphical user interface toolkit == Documentation, generation and analysis == errcheck — unchecked error checker godoc — documentation tool goimports — import management tool mockgen — mock generator pkgsite — package documentation site Prometheus — monitoring and alerting toolkit stringer — code generation tool wire — dependency injection code generator == Package hosting and community services == GoCenter — former Go package repository pkg.go.dev — package documentation and discovery site proxy.golang.org — module proxy == Major applications written in Go == Consul — service networking platform Docker — containerization platform InfluxDB — time-series database written in Go Kubernetes — container orchestration platform Ollama — platform for running and managing large language models locally Terraform — infrastructure as code tool Vault — secrets management tool
Read more →
Robinson compass mask

In image processing, a Robinson compass mask is a type of compass mask used for edge detection. It has eight major compass orientations, each will extract the edges in respect to its direction. A combined use of compass masks of different directions could detect the edges from different angles. == Technical explanation == The Robinson compass mask is defined by taking a single mask and rotating it to form eight orientations: North: [ − 1 0 1 − 2 0 2 − 1 0 1 ] {\displaystyle {\text{North:}}{\begin{bmatrix}-1&0&1\\-2&0&2\\-1&0&1\end{bmatrix}}} North West: [ 0 1 2 − 1 0 1 − 2 − 1 0 ] {\displaystyle {\text{North West:}}{\begin{bmatrix}0&1&2\\-1&0&1\\-2&-1&0\end{bmatrix}}} West: [ 1 2 1 0 0 0 − 1 − 2 − 1 ] {\displaystyle {\text{West:}}{\begin{bmatrix}1&2&1\\0&0&0\\-1&-2&-1\end{bmatrix}}} South West: [ 2 1 0 1 0 − 1 0 − 1 − 2 ] {\displaystyle {\text{South West:}}{\begin{bmatrix}2&1&0\\1&0&-1\\0&-1&-2\end{bmatrix}}} South: [ 1 0 − 1 2 0 − 2 1 0 − 1 ] {\displaystyle {\text{South:}}{\begin{bmatrix}1&0&-1\\2&0&-2\\1&0&-1\end{bmatrix}}} South East: [ 0 − 1 − 2 1 0 − 1 2 1 0 ] {\displaystyle {\text{South East:}}{\begin{bmatrix}0&-1&-2\\1&0&-1\\2&1&0\end{bmatrix}}} East: [ − 1 − 2 − 1 0 0 0 1 2 1 ] {\displaystyle {\text{East:}}{\begin{bmatrix}-1&-2&-1\\0&0&0\\1&2&1\end{bmatrix}}} North East: [ − 2 − 1 0 − 1 0 1 0 1 2 ] {\displaystyle {\text{North East:}}{\begin{bmatrix}-2&-1&0\\-1&0&1\\0&1&2\end{bmatrix}}} The direction axis is the line of zeros in the matrix. Robinson compass mask is similar to kirsch compass masks, but is simpler to implement. Since the matrix coefficients only contains 0, 1, 2, and are symmetrical, only the results of four masks need to be calculated, the other four results are the negation of the first four results. An edge, or contour is an tiny area with neighboring distinct pixel values. The convolution of each mask with the image would create a high value output where there is a rapid change of pixel value, thus an edge point is found. All the detected edge points would line up as edges. == Example == An example of Robinson compass masks applied to the original image. Obviously, the edges in the direction of the mask is enhanced.
Read more →
PressWise

PressWise was digital imposition software to quickly and easily impose most any variety of flat and folding layouts. It was acquired by the Aldus Prepress Group affectionately known in the print and publishing industry as the Aldus WiseGuys in August 1991 from Emulation Technologies Inc. of Cleveland, Ohio. It was further developed by the Aldus Press Group and launched as the first of many Aldus prepress products in 1993. It was subsequently owned by Adobe Systems, then Luminous Corporation (Seattle), then Imation, and finally ScenicSoft. PressWise was discontinued by ScenicSoft in 1999 ultimately. == History == In February 2009, the PressWise copyright was acquired by Aethos Technologies and a new print automation product was launched by its creator, Eric Wold of Santa Rosa, California. This new product has no relationship to the old imposition software of the same name. It's notable that Larry Letteney, former President of Creo Americas was a board member and shareholder of Aethos Technologies during its early phase. Datatech SmartSoft acquired exclusive distribution rights to the software in September 2009. In September 2010 Datatech SmartSoft completed the acquisition of the PressWise brand and product.
Read more →