AI Grammar Fixer Online

AI Grammar Fixer Online — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Wetware computer

  A wetware computer is an organic computer (which can also be known as an artificial organic brain or a neurocomputer) composed of organic material "wetware" such as "living" neurons. Wetware computers composed of neurons are different than conventional computers because they use biological materials, and offer the possibility of substantially more energy-efficient computing. While a wetware computer is still largely conceptual, there has been limited success with construction and prototyping, which has acted as a proof of the concept's realistic application to computing in the future. The most notable prototypes have stemmed from the research completed by biological engineer William Ditto during his time at the Georgia Institute of Technology. His work constructing a simple neurocomputer capable of basic addition from leech neurons in 1999 was a significant discovery for the concept. This research was a primary example driving interest in creating these artificially constructed, but still organic brains. == Origins and theoretical foundations == The term wetware came from cyberpunk fiction, notably through Gibson's Neuromancer, but was quickly taken up in scientific literature to explain computation by biological material. Theories of early biological computation borrowed from Alan Turing's morphogenesis model, which showed that chemical interactions could produce complex patterns without centralized control. Hopfield's associative memory networks also provided a foundation for biological information systems with fault tolerance and self-organization. == Major characteristics and processes == Biological wetware systems demonstrate dynamic reconfigurability underpinned by neuroplasticity and enable continuous learning and adaptation. Reaction-diffusion-based computing and molecular logic gates allow spatially parallel information processing unachievable in conventional systems. These systems also show fault tolerance and self-repair at the cellular and network level. The development of cerebral organoids—miniature lab-grown brains—demonstrates spontaneous learning behavior and suggests biological tissue as a viable computational substrate. == Overview == The concept of wetware is an application of specific interest to the field of computer manufacturing. Moore's law, which states that the number of transistors which can be placed on a silicon chip is doubled roughly every two years, has acted as a goal for the industry for decades, but as the size of computers continues to decrease, the ability to meet this goal has become more difficult, threatening to reach a plateau. Due to the difficulty in reducing the size of computers because of size limitations of transistors and integrated circuits, wetware provides an unconventional alternative. A wetware computer composed of neurons is an ideal concept because, unlike conventional materials which operate in binary (on/off), a neuron can shift between thousands of states, constantly altering its chemical conformation, and redirecting electrical pulses through over 200,000 channels in any of its many synaptic connections. Because of this large difference in the possible settings for any one neuron, compared to the binary limitations of conventional computers, the space limitations are far fewer. == Background == The concept of wetware is distinct and unconventional and draws slight resonance with both hardware and software from conventional computers. While hardware is understood as the physical architecture of traditional computational devices, comprising integrated circuits and supporting infrastructure, software represents the encoded architecture of storage and instructions. Wetware is a separate concept that uses the formation of organic molecules, mostly complex cellular structures (such as neurons), to create a computational device such as a computer. In wetware, the ideas of hardware and software are intertwined and interdependent. The molecular and chemical composition of the organic or biological structure would represent not only the physical structure of the wetware but also the software, being continually reprogrammed by the discrete shifts in electrical pulses and chemical concentration gradients as the molecules change their structures to communicate signals. The responsiveness of a cell, proteins, and molecules to changing conformations, both within their structures and around them, ties the idea of internal programming and external structure together in a way that is alien to the current model of conventional computer architecture. The structure of wetware represents a model where the external structure and internal programming are interdependent and unified; meaning that changes to the programming or internal communication between molecules of the device would represent a physical change in the structure. The dynamic nature of wetware borrows from the function of complex cellular structures in biological organisms. The combination of "hardware" and "software" into one dynamic, and interdependent system which uses organic molecules and complexes to create an unconventional model for computational devices is a specific example of applied biorobotics. === The cell as a model of wetware === Cells in many ways can be seen as their form of naturally occurring wetware, similar to the concept that the human brain is the preexisting model system for complex wetware. In his book Wetware: A Computer in Every Living Cell (2009) Dennis Bray explains his theory that cells, which are the most basic form of life, are just a highly complex computational structure, like a computer. To simplify one of his arguments a cell can be seen as a type of computer, using its structured architecture. In this architecture, much like a traditional computer, many smaller components operate in tandem to receive input, process the information, and compute an output. In an overly simplified, non-technical analysis, cellular function can be broken into the following components: Information and instructions for execution are stored as DNA in the cell, RNA acts as a source for distinctly encoded input, processed by ribosomes and other transcription factors to access and process the DNA and to output a protein. Bray's argument in favor of viewing cells and cellular structures as models of natural computational devices is important when considering the more applied theories of wetware to biorobotics. === Biorobotics === Wetware and biorobotics are closely related concepts, which both borrow from similar overall principles. A biorobotic structure can be defined as a system modeled from a preexisting organic complex or model such as cells (neurons) or more complex structures like organs (brain) or whole organisms. Unlike wetware, the concept of biorobotics is not always a system composed of organic molecules, but instead could be composed of conventional material which is designed and assembled in a structure similar or derived from a biological model. Biorobotics have many applications and are used to address the challenges of conventional computer architecture. Conceptually, designing a program, robot, or computational device after a preexisting biological model such as a cell, or even a whole organism, provides the engineer or programmer the benefits of incorporating into the structure the evolutionary advantages of the model. == Effects on users == Wetware technologies such as BCIs and neuromorphic chips offer new possibilities for user autonomy. For those with disabilities, such systems could restore motor or sensory functions and enhance quality of life. However, these technologies raise ethical questions: cognitive privacy, consent over biological data, and risk of exploitation. Without proper oversight, wetware technologies may also widen inequality, favoring those with access to cognitive enhancements. Open governance frameworks and ethical AI design grounded in neuro ethics will be essential. With the development of wetware devices, disparities in access could exacerbate social inequalities, benefiting those who have resources to enhance cognitive or physical abilities. It is necessary to create strong ethical frameworks, inclusive development practices, and open systems of governance to reduce risks and make sure that wetware advances are beneficial to all segments of society. == Applications and goals == === Basic neurocomputer composed of leech neurons === In 1999 William Ditto and his team of researchers at Georgia Institute of Technology and Emory University created a basic form of a wetware computer capable of simple addition by harnessing leech neurons. Leeches were used as a model organism due to the large size of their neuron, and the ease associated with their collection and manipulation. However, these results have never been published in a peer-reviewed journal, prompting questions about the validity of the claims. The computer was able to complete basic addition through electrical probes

  Read more →
• 

  GNU Octave

  GNU Octave is a scientific programming language for scientific computing and numerical computation. Among other things, Octave can be used to solve linear and nonlinear problems numerically and to perform other numerical experiments using a language that is mostly compatible with MATLAB. It may also be used as a batch-oriented language. As part of the GNU Project, it is free software under the terms of the GNU General Public License. == History == The project was conceived around 1988. At first it was intended to be a companion to a chemical reactor design course. Full development was started by John W. Eaton in 1992. The first alpha release dates back to 4 January 1993 and on 17 February 1994 version 1.0 was released. Version 9.2.0 was released on 7 June 2024. The program is named after Octave Levenspiel, a former professor of the principal author. Levenspiel was known for his ability to perform quick back-of-the-envelope calculations. == Development history == == Developments == In addition to use on desktops for personal scientific computing, Octave is used in academia and industry. For example, Octave was used on a massive parallel computer at Pittsburgh Supercomputing Center to find vulnerabilities related to guessing social security numbers. Acceleration with OpenCL or CUDA is also possible with use of GPUs. == Technical details == Octave is written in C++ using the C++ standard library. Octave uses an interpreter to execute the Octave scripting language. Octave is extensible using dynamically loadable modules. Octave interpreter has an OpenGL-based graphics engine to create plots, graphs and charts and to save or print them. Alternatively, gnuplot can be used for the same purpose. Octave includes a graphical user interface (GUI) in addition to the traditional command-line interface (CLI); see #User interfaces for details. == Octave, the language == The Octave language is an interpreted programming language. It is a structured programming language (similar to C) and supports many common C standard library functions, and also certain UNIX system calls and functions. However, it does not support passing arguments by reference although function arguments are copy-on-write to avoid unnecessary duplication. Octave programs consist of a list of function calls or a script. The syntax is matrix-based and provides various functions for matrix operations. It supports various data structures and allows object-oriented programming. Its syntax is very similar to MATLAB, and careful programming of a script will allow it to run on both Octave and MATLAB. Because Octave is made available under the GNU General Public License, it may be freely changed, copied and used. The program runs on Microsoft Windows and most Unix and Unix-like operating systems, including Linux, Android, and macOS. == Notable features == === Command and variable name completion === Typing a TAB character on the command line causes Octave to attempt to complete variable, function, and file names (similar to Bash's tab completion). Octave uses the text before the cursor as the initial portion of the name to complete. === Command history === When running interactively, Octave saves the commands typed in an internal buffer so that they can be recalled and edited. === Data structures === Octave includes a limited amount of support for organizing data in structures. In this example, we see a structure x with elements a, b, and c, (an integer, an array, and a string, respectively): === Short-circuit Boolean operators === Octave's && and || logical operators are evaluated in a short-circuit fashion (like the corresponding operators in the C language), in contrast to the element-by-element operators & and |. === Increment and decrement operators === Octave includes the C-like increment and decrement operators ++ and -- in both their prefix and postfix forms. Octave also does augmented assignment, e.g. x += 5. === Unwind-protect === Octave supports a limited form of exception handling modelled after the unwind_protect of Lisp. The general form of an unwind_protect block looks like this: As a general rule, GNU Octave recognizes as termination of a given block either the keyword end (which is compatible with the MATLAB language) or a more specific keyword endblock or, in some cases, end_block. As a consequence, an unwind_protect block can be terminated either with the keyword end_unwind_protect as in the example, or with the more portable keyword end. The cleanup part of the block is always executed. In case an exception is raised by the body part, cleanup is executed immediately before propagating the exception outside the block unwind_protect. GNU Octave also supports another form of exception handling (compatible with the MATLAB language): This latter form differs from an unwind_protect block in two ways. First, exception_handling is only executed when an exception is raised by body. Second, after the execution of exception_handling the exception is not propagated outside the block (unless a rethrow( lasterror ) statement is explicitly inserted within the exception_handling code). === Variable-length argument lists === Octave has a mechanism for handling functions that take an unspecified number of arguments without explicit upper limit. To specify a list of zero or more arguments, use the special argument varargin as the last (or only) argument in the list. varargin is a cell array containing all the input arguments. === Variable-length return lists === A function can be set up to return any number of values by using the special return value varargout. For example: === C++ integration === It is also possible to execute Octave code directly in a C++ program. For example, here is a code snippet for calling rand([10,1]): C and C++ code can be integrated into GNU Octave by creating oct files, or using the MATLAB compatible MEX files. == MATLAB compatibility == Octave has been built with MATLAB compatibility in mind, and shares many features with MATLAB: % Script: myscript.m a = 5; b = a 2 % Function: myfunc.m function result = myfunc(x) result = x^2 + 3; end Matrices as fundamental data type. Built-in support for complex numbers. Powerful built-in math functions and extensive function libraries. Extensibility in the form of user-defined functions. Octave treats incompatibility with MATLAB as a bug; therefore, it could be considered a software clone, which does not infringe software copyright as per Lotus v. Borland court case. MATLAB scripts from the MathWorks' FileExchange repository in principle are compatible with Octave. However, while they are often provided and uploaded by users under an Octave compatible and proper open source BSD license, the FileExchange Terms of use prohibit any usage beside MathWorks' proprietary MATLAB. === Syntax compatibility === There are a few purposeful, albeit minor, syntax additions Archived 2012-04-26 at the Wayback Machine: Comment lines can be prefixed with the # character as well as the % character; Various C-based operators ++, --, +=, =, /= are supported; Elements can be referenced without creating a new variable by cascaded indexing, e.g. [1:10](3); Strings can be defined with the double-quote " character as well as the single-quote ' character; When the variable type is single (a single-precision floating-point number), Octave calculates the "mean" in the single-domain (MATLAB in double-domain) which is faster but gives less accurate results; Blocks can also be terminated with more specific Control structure keywords, i.e., endif, endfor, endwhile, etc.; Functions can be defined within scripts and at the Octave prompt; Presence of a do-until loop (similar to do-while in C). === Function compatibility === Many, but not all, of the numerous MATLAB functions are available in GNU Octave, some of them accessible through packages in Octave Forge. The functions available as part of either core Octave or Forge packages are listed online Archived 2024-03-14 at the Wayback Machine. A list of unavailable functions is included in the Octave function __unimplemented.m__. Unimplemented functions are also listed under many Octave Forge packages in the Octave Wiki. When an unimplemented function is called the following error message is shown: == User interfaces == Octave comes with an official graphical user interface (GUI) and an integrated development environment (IDE) based on Qt. It has been available since Octave 3.8, and has become the default interface (over the command-line interface) with the release of Octave 4.0. It was well-received by an EDN contributor, who wrote "[Octave] now has a very workable GUI" in reviewing the then-new GUI in 2014. Several 3rd-party graphical front-ends have also been developed, like ToolboX for coding education. == GUI applications == With Octave code, the user can create GUI applications. See GUI Development (GNU Octave (version 7.1.0)). Below are some examples: Button, edit control, checkboxTextboxListbox wit

  Read more →
• 

  Fitness approximation

  Fitness approximation aims to approximate the objective or fitness functions in evolutionary optimization by building up machine learning models based on data collected from numerical simulations or physical experiments. The machine learning models for fitness approximation are also known as meta-models or surrogates, and evolutionary optimization based on approximated fitness evaluations are also known as surrogate-assisted evolutionary approximation. Fitness approximation in evolutionary optimization can be seen as a sub-area of data-driven evolutionary optimization. == Approximate models in function optimization == === Motivation === In many real-world optimization problems including engineering problems, the number of fitness function evaluations needed to obtain a good solution dominates the optimization cost. In order to obtain efficient optimization algorithms, it is crucial to use prior information gained during the optimization process. Conceptually, a natural approach to utilizing the known prior information is building a model of the fitness function to assist in the selection of candidate solutions for evaluation. A variety of techniques for constructing such a model, often also referred to as surrogates, metamodels or approximation models – for computationally expensive optimization problems have been considered. === Approaches === Common approaches to constructing approximate models based on learning and interpolation from known fitness values of a small population include: Low-degree polynomials and regression models Fourier surrogate modeling Artificial neural networks including Multilayer perceptrons Radial basis function network Support vector machines Due to the limited number of training samples and high dimensionality encountered in engineering design optimization, constructing a globally valid approximate model remains difficult. As a result, evolutionary algorithms using such approximate fitness functions may converge to local optima. Therefore, it can be beneficial to selectively use the original fitness function together with the approximate model.

  Read more →
• 

  UIMA

  UIMA ( yoo-EE-mə), short for Unstructured Information Management Architecture, is an OASIS standard for content analytics, originally developed at IBM. It provides a component software architecture for the development, discovery, composition, and deployment of multi-modal analytics for the analysis of unstructured information and integration with search technologies. == Structure == The UIMA architecture can be thought of in four dimensions: It specifies component interfaces in an analytics pipeline. It describes a set of design patterns. It suggests two data representations: an in-memory representation of annotations for high-performance analytics and an XML representation of annotations for integration with remote web services. It suggests development roles allowing tools to be used by users with diverse skills. == Implementations and uses == Apache UIMA, a reference implementation of UIMA, is maintained by the Apache Software Foundation. UIMA is used in a number of software projects: IBM Research's Watson uses UIMA for analyzing unstructured data. The Clinical Text Analysis and Knowledge Extraction System (Apache cTAKES) is a UIMA-based system for information extraction from medical records. DKPro Core is a collection of reusable UIMA components for general-purpose natural language processing.

  Read more →
• 

  FloodAlerts

  FloodAlerts is a software application, developed by software specialists Shoothill, which takes real-time flooding information, and displays the data on an interactive Bing map, updating and warning its users when they, their premises or the routes they need to travel could be at risk of flooding. == History == FloodAlerts was launched in 2012, originally as the world's first Facebook flood warning app. == Operation == FloodAlerts is made available free of charge to individuals. Users are able to set up their own monitored locations and receive alerts via the application or their Facebook wall if the locations they are monitoring are at imminent risk of flooding. Hosted in the Cloud, using the Microsoft Windows Azure platform, the FloodAlerts application processes the data received from the Environment Agency, automatically creates the required map tiles, pins and alerts and displays them on an interactive Bing map, updating the content every 15 minutes. Users are able to see the latest information on the map without having to refresh their browser. FloodAlerts can also be provided as a customised risk management solution to businesses that require infrastructure or asset safety monitoring in areas where water levels are rising or receding. == Awards and recognition == FloodAlerts has received The Guardian and Virgin Media Business's 2012 Innovation Nation Awards and was shortlisted as a finalist for a further two national awards: the UK IT Industry Awards for Innovation and Entrepreneurship and The Institution of Engineering and Technology Innovation Awards for Information Technology. == In the press == The FloodAlerts application was reviewed on the BBC website. It was also reviewed on BBC Click.

  Read more →
• 

  Radial basis function network

  In the field of mathematical modeling, a radial basis function network is an artificial neural network that uses radial basis functions as activation functions. The output of the network is a linear combination of radial basis functions of the inputs and neuron parameters. Radial basis function networks have many uses, including function approximation, time series prediction, classification, and system control. They were first formulated in a 1988 paper by Broomhead and Lowe, both researchers at the Royal Signals and Radar Establishment. == Network architecture == Radial basis function (RBF) networks typically have three layers: an input layer, a hidden layer with a non-linear RBF activation function and a linear output layer. The input can be modeled as a vector of real numbers x ∈ R n {\displaystyle \mathbf {x} \in \mathbb {R} ^{n}} . The output of the network is then a scalar function of the input vector, φ : R n → R {\displaystyle \varphi :\mathbb {R} ^{n}\to \mathbb {R} } , and is given by φ ( x ) = ∑ i = 1 N a i ρ ( | | x − c i | | ) {\displaystyle \varphi (\mathbf {x} )=\sum _{i=1}^{N}a_{i}\rho (||\mathbf {x} -\mathbf {c} _{i}||)} where N {\displaystyle N} is the number of neurons in the hidden layer, c i {\displaystyle \mathbf {c} _{i}} is the center vector for neuron i {\displaystyle i} , and a i {\displaystyle a_{i}} is the weight of neuron i {\displaystyle i} in the linear output neuron. Functions that depend only on the distance from a center vector are radially symmetric about that vector, hence the name radial basis function. In the basic form, all inputs are connected to each hidden neuron. The norm is typically taken to be the Euclidean distance (although the Mahalanobis distance appears to perform better with pattern recognition) and the radial basis function is commonly taken to be Gaussian ρ ( ‖ x − c i ‖ ) = exp ⁡ [ − β i ‖ x − c i ‖ 2 ] {\displaystyle \rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}=\exp \left[-\beta _{i}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert ^{2}\right]} . The Gaussian basis functions are local to the center vector in the sense that lim | | x | | → ∞ ρ ( ‖ x − c i ‖ ) = 0 {\displaystyle \lim _{||x||\to \infty }\rho (\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert )=0} i.e. changing parameters of one neuron has only a small effect for input values that are far away from the center of that neuron. Given certain mild conditions on the shape of the activation function, RBF networks are universal approximators on a compact subset of R n {\displaystyle \mathbb {R} ^{n}} . This means that an RBF network with enough hidden neurons can approximate any continuous function on a closed, bounded set with arbitrary precision. The parameters a i {\displaystyle a_{i}} , c i {\displaystyle \mathbf {c} _{i}} , and β i {\displaystyle \beta _{i}} are determined in a manner that optimizes the fit between φ {\displaystyle \varphi } and the data. === Normalization === ==== Normalized architecture ==== In addition to the above unnormalized architecture, RBF networks can be normalized. In this case the mapping is φ ( x ) = d e f ∑ i = 1 N a i ρ ( ‖ x − c i ‖ ) ∑ i = 1 N ρ ( ‖ x − c i ‖ ) = ∑ i = 1 N a i u ( ‖ x − c i ‖ ) {\displaystyle \varphi (\mathbf {x} )\ {\stackrel {\mathrm {def} }{=}}\ {\frac {\sum _{i=1}^{N}a_{i}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}{\sum _{i=1}^{N}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}}=\sum _{i=1}^{N}a_{i}u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} where u ( ‖ x − c i ‖ ) = d e f ρ ( ‖ x − c i ‖ ) ∑ j = 1 N ρ ( ‖ x − c j ‖ ) {\displaystyle u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}\ {\stackrel {\mathrm {def} }{=}}\ {\frac {\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}{\sum _{j=1}^{N}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{j}\right\Vert {\big )}}}} is known as a normalized radial basis function. ==== Theoretical motivation for normalization ==== There is theoretical justification for this architecture in the case of stochastic data flow. Assume a stochastic kernel approximation for the joint probability density P ( x ∧ y ) = 1 N ∑ i = 1 N ρ ( ‖ x − c i ‖ ) σ ( | y − e i | ) {\displaystyle P\left(\mathbf {x} \land y\right)={1 \over N}\sum _{i=1}^{N}\,\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}\,\sigma {\big (}\left\vert y-e_{i}\right\vert {\big )}} where the weights c i {\displaystyle \mathbf {c} _{i}} and e i {\displaystyle e_{i}} are exemplars from the data and we require the kernels to be normalized ∫ ρ ( ‖ x − c i ‖ ) d n x = 1 {\displaystyle \int \rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}\,d^{n}\mathbf {x} =1} and ∫ σ ( | y − e i | ) d y = 1 {\displaystyle \int \sigma {\big (}\left\vert y-e_{i}\right\vert {\big )}\,dy=1} . The probability densities in the input and output spaces are P ( x ) = ∫ P ( x ∧ y ) d y = 1 N ∑ i = 1 N ρ ( ‖ x − c i ‖ ) {\displaystyle P\left(\mathbf {x} \right)=\int P\left(\mathbf {x} \land y\right)\,dy={1 \over N}\sum _{i=1}^{N}\,\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} and The expectation of y given an input x {\displaystyle \mathbf {x} } is φ ( x ) = d e f E ( y ∣ x ) = ∫ y P ( y ∣ x ) d y {\displaystyle \varphi \left(\mathbf {x} \right)\ {\stackrel {\mathrm {def} }{=}}\ E\left(y\mid \mathbf {x} \right)=\int y\,P\left(y\mid \mathbf {x} \right)dy} where P ( y ∣ x ) {\displaystyle P\left(y\mid \mathbf {x} \right)} is the conditional probability of y given x {\displaystyle \mathbf {x} } . The conditional probability is related to the joint probability through Bayes' theorem P ( y ∣ x ) = P ( x ∧ y ) P ( x ) {\displaystyle P\left(y\mid \mathbf {x} \right)={\frac {P\left(\mathbf {x} \land y\right)}{P\left(\mathbf {x} \right)}}} which yields φ ( x ) = ∫ y P ( x ∧ y ) P ( x ) d y {\displaystyle \varphi \left(\mathbf {x} \right)=\int y\,{\frac {P\left(\mathbf {x} \land y\right)}{P\left(\mathbf {x} \right)}}\,dy} . This becomes φ ( x ) = ∑ i = 1 N e i ρ ( ‖ x − c i ‖ ) ∑ i = 1 N ρ ( ‖ x − c i ‖ ) = ∑ i = 1 N e i u ( ‖ x − c i ‖ ) {\displaystyle \varphi \left(\mathbf {x} \right)={\frac {\sum _{i=1}^{N}e_{i}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}{\sum _{i=1}^{N}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}}=\sum _{i=1}^{N}e_{i}u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} when the integrations are performed. === Local linear models === It is sometimes convenient to expand the architecture to include local linear models. In that case the architectures become, to first order, φ ( x ) = ∑ i = 1 N ( a i + b i ⋅ ( x − c i ) ) ρ ( ‖ x − c i ‖ ) {\displaystyle \varphi \left(\mathbf {x} \right)=\sum _{i=1}^{N}\left(a_{i}+\mathbf {b} _{i}\cdot \left(\mathbf {x} -\mathbf {c} _{i}\right)\right)\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} and φ ( x ) = ∑ i = 1 N ( a i + b i ⋅ ( x − c i ) ) u ( ‖ x − c i ‖ ) {\displaystyle \varphi \left(\mathbf {x} \right)=\sum _{i=1}^{N}\left(a_{i}+\mathbf {b} _{i}\cdot \left(\mathbf {x} -\mathbf {c} _{i}\right)\right)u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} in the unnormalized and normalized cases, respectively. Here b i {\displaystyle \mathbf {b} _{i}} are weights to be determined. Higher order linear terms are also possible. This result can be written φ ( x ) = ∑ i = 1 2 N ∑ j = 1 n e i j v i j ( x − c i ) {\displaystyle \varphi \left(\mathbf {x} \right)=\sum _{i=1}^{2N}\sum _{j=1}^{n}e_{ij}v_{ij}{\big (}\mathbf {x} -\mathbf {c} _{i}{\big )}} where e i j = { a i , if i ∈ [ 1 , N ] b i j , if i ∈ [ N + 1 , 2 N ] {\displaystyle e_{ij}={\begin{cases}a_{i},&{\mbox{if }}i\in [1,N]\\b_{ij},&{\mbox{if }}i\in [N+1,2N]\end{cases}}} and v i j ( x − c i ) = d e f { δ i j ρ ( ‖ x − c i ‖ ) , if i ∈ [ 1 , N ] ( x i j − c i j ) ρ ( ‖ x − c i ‖ ) , if i ∈ [ N + 1 , 2 N ] {\displaystyle v_{ij}{\big (}\mathbf {x} -\mathbf {c} _{i}{\big )}\ {\stackrel {\mathrm {def} }{=}}\ {\begin{cases}\delta _{ij}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )},&{\mbox{if }}i\in [1,N]\\\left(x_{ij}-c_{ij}\right)\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )},&{\mbox{if }}i\in [N+1,2N]\end{cases}}} in the unnormalized case and in the normalized case. Here δ i j {\displaystyle \delta _{ij}} is a Kronecker delta function defined as δ i j = { 1 , if i = j 0 , if i ≠ j {\displaystyle \delta _{ij}={\begin{cases}1,&{\mbox{if }}i=j\\0,&{\mbox{if }}i\neq j\end{cases}}} . == Training == RBF networks are typically trained from pairs of input and target values x ( t ) , y ( t ) {\displaystyle \mathbf {x} (t),y(t)} , t = 1 , … , T {\displaystyle t=1,\dots ,T} by a two-step algorithm. In the first step, the center vectors c i {\displaystyle \mathbf {c} _{i}} of the RBF functions in the hidden layer

  Read more →
• 

  Linear genetic programming

  "Linear genetic programming" is unrelated to "linear programming". Linear genetic programming (LGP) is a particular method of genetic programming wherein computer programs in a population are represented as a sequence of register-based instructions from an imperative programming language or machine language. The adjective "linear" stems from the fact that each LGP program is a sequence of instructions and the sequence of instructions is normally executed sequentially. Like in other programs, the data flow in LGP can be modeled as a graph that will visualize the potential multiple usage of register contents and the existence of structurally noneffective code (introns) which are two main differences of this genetic representation from the more common tree-based genetic programming (TGP) variant. Like other Genetic Programming methods, Linear genetic programming requires the input of data to run the program population on. Then, the output of the program (its behaviour) is judged against some target behaviour, using a fitness function. However, LGP is generally more efficient than tree genetic programming due to its two main differences mentioned above: Intermediate results (stored in registers) can be reused and a simple intron removal algorithm exists that can be executed to remove all non-effective code prior to programs being run on the intended data. These two differences often result in compact solutions and substantial computational savings compared to the highly constrained data flow in trees and the common method of executing all tree nodes in TGP. Furthermore, LGP naturally has multiple outputs by defining multiple output registers and easily cooperates with control flow operations. Linear genetic programming has been applied in many domains, including system modeling and system control with considerable success. Linear genetic programming should not be confused with linear tree programs in tree genetic programming, program composed of a variable number of unary functions and a single terminal. Note that linear tree GP differs from bit string genetic algorithms since a population may contain programs of different lengths and there may be more than two types of functions or more than two types of terminals. == Examples of LGP programs == Because LGP programs are basically represented by a linear sequence of instructions, they are simpler to read and to operate on than their tree-based counterparts. For example, a simple program written to solve a Boolean function problem with 3 inputs (in R1, R2, R3) and one output (in R0), could read like this: R1, R2, R3 have to be declared as input (read-only) registers, while R0 and R4 are declared as calculation (read-write) registers. This program is very simple, having just 5 instructions. But mutation and crossover operators could work to increase the length of the program, as well as the content of each of its instructions. Note that one instruction is non-effective or an intron (marked), since it does not impact the output register R0. Recognition of those instructions is the basis for the intron removal algorithm which is used analyze code prior to execution. Technically, this happens by copying an individual and then run the intron removal once. The copy with removed introns is then executed as many times as dictated by the number of training cases. Notably, the original individual is left intact, so as to continue participating in the evolutionary process. It is only the copy that is executed that is compressed by removing these "structural" introns. Another simple program, this one written in the LGP language Slash/A looks like a series of instructions separated by a slash: By representing such code in bytecode format, i.e. as an array of bytes each representing a different instruction, one can make mutation operations simply by changing an element of such an array.

  Read more →
• 

  Inverted pendulum

  An inverted pendulum is a pendulum that has its center of mass above its pivot point. It is unstable and falls over without additional help. It can be suspended stably in this inverted position by using a control system to monitor the angle of the pole and move the pivot point horizontally back under the center of mass when it starts to fall over, keeping it balanced. The inverted pendulum is a classic problem in dynamics and control theory and is used as a benchmark for testing control strategies. It is often implemented with the pivot point mounted on a cart that can move horizontally under control of an electronic servo system as shown in the photo; this is called a cart and pole apparatus. Most applications limit the pendulum to 1 degree of freedom by affixing the pole to an axis of rotation. Whereas a normal pendulum is stable when hanging downward, an inverted pendulum is inherently unstable, and must be actively balanced in order to remain upright; this can be done either by applying a torque at the pivot point, by moving the pivot point horizontally as part of a feedback system, changing the rate of rotation of a mass mounted on the pendulum on an axis parallel to the pivot axis and thereby generating a net torque on the pendulum, or by oscillating the pivot point vertically. A simple demonstration of moving the pivot point in a feedback system is achieved by balancing an upturned broomstick on the end of one's finger. A second type of inverted pendulum is a tiltmeter for tall structures, which consists of a wire anchored to the bottom of the foundation and attached to a float in a pool of oil at the top of the structure that has devices for measuring movement of the neutral position of the float away from its original position. == Overview == A pendulum with its bob hanging directly below the support pivot is at a stable equilibrium point, where it remains motionless because there is no torque on the pendulum. If displaced from this position, it experiences a restoring torque that returns it toward the equilibrium position. A pendulum with its bob in an inverted position, supported on a rigid rod directly above the pivot, 180° from its stable equilibrium position, is at an unstable equilibrium point. At this point again there is no torque on the pendulum, but the slightest displacement away from this position causes a gravitation torque on the pendulum that accelerates it away from equilibrium, causing it to fall over. In order to stabilize a pendulum in this inverted position, a feedback control system can be used, which monitors the pendulum's angle and moves the position of the pivot point sideways when the pendulum starts to fall over, to keep it balanced. The inverted pendulum is a classic problem in dynamics and control theory and is widely used as a benchmark for testing control algorithms (PID controllers, state-space representation, neural networks, fuzzy control, genetic algorithms, etc.). Variations on this problem include multiple links, allowing the motion of the cart to be commanded while maintaining the pendulum, and balancing the cart-pendulum system on a see-saw. The inverted pendulum is related to rocket or missile guidance, where the center of gravity is located behind the center of drag causing aerodynamic instability. The understanding of a similar problem can be shown by simple robotics in the form of a balancing cart. Balancing an upturned broomstick on the end of one's finger is a simple demonstration, and the problem is solved by self-balancing personal transporters such as the Segway PT, the self-balancing hoverboard and the self-balancing unicycle. Another way that an inverted pendulum may be stabilized, without any feedback or control mechanism, is by oscillating the pivot rapidly up and down. This is called Kapitza's pendulum. If the oscillation is sufficiently strong (in terms of its acceleration and amplitude) then the inverted pendulum can recover from perturbations in a strikingly counterintuitive manner. If the driving point moves in simple harmonic motion, the pendulum's motion is described by the Mathieu equation. == Equations of motion == The equations of motion of inverted pendulums are dependent on what constraints are placed on the motion of the pendulum. Inverted pendulums can be created in various configurations resulting in a number of Equations of Motion describing the behavior of the pendulum. === Stationary pivot point === In a configuration where the pivot point of the pendulum is fixed in space, the equation of motion is similar to that for an uninverted pendulum. The equation of motion below assumes no friction or any other resistance to movement, a rigid massless rod, and the restriction to 2-dimensional movement. θ ¨ − g ℓ sin ⁡ θ = 0 {\displaystyle {\ddot {\theta }}-{g \over \ell }\sin \theta =0} Where θ ¨ {\displaystyle {\ddot {\theta }}} is the angular acceleration of the pendulum, g {\displaystyle g} is the standard gravity on the surface of the Earth, ℓ {\displaystyle \ell } is the length of the pendulum, and θ {\displaystyle \theta } is the angular displacement measured from the equilibrium position. When θ ¨ {\displaystyle {\ddot {\theta }}} added to both sides, it has the same sign as the angular acceleration term: θ ¨ = g ℓ sin ⁡ θ {\displaystyle {\ddot {\theta }}={g \over \ell }\sin \theta } Thus, the inverted pendulum accelerates away from the vertical unstable equilibrium in the direction initially displaced, and the acceleration is inversely proportional to the length. Tall pendulums fall more slowly than short ones. Derivation using torque and moment of inertia: The pendulum is assumed to consist of a point mass, of mass m {\displaystyle m} , affixed to the end of a massless rigid rod, of length ℓ {\displaystyle \ell } , attached to a pivot point at the end opposite the point mass. The net torque of the system must equal the moment of inertia times the angular acceleration: τ n e t = I θ ¨ {\displaystyle {\boldsymbol {\tau }}_{\mathrm {net} }=I{\ddot {\theta }}} The torque due to gravity providing the net torque: τ n e t = m g ℓ sin ⁡ θ {\displaystyle {\boldsymbol {\tau }}_{\mathrm {net} }=mg\ell \sin \theta \,\!} Where θ {\displaystyle \theta \ } is the angle measured from the inverted equilibrium position. The resulting equation: I θ ¨ = m g ℓ sin ⁡ θ {\displaystyle I{\ddot {\theta }}=mg\ell \sin \theta \,\!} The moment of inertia for a point mass: I = m R 2 {\displaystyle I=mR^{2}} In the case of the inverted pendulum the radius is the length of the rod, ℓ {\displaystyle \ell } . Substituting in I = m ℓ 2 {\displaystyle I=m\ell ^{2}} m ℓ 2 θ ¨ = m g ℓ sin ⁡ θ {\displaystyle m\ell ^{2}{\ddot {\theta }}=mg\ell \sin \theta \,\!} Mass and ℓ 2 {\displaystyle \ell ^{2}} is divided from each side resulting in: θ ¨ = g ℓ sin ⁡ θ {\displaystyle {\ddot {\theta }}={g \over \ell }\sin \theta } === Inverted pendulum on a cart === An inverted pendulum on a cart consists of a mass m {\displaystyle m} at the top of a pole of length ℓ {\displaystyle \ell } pivoted on a horizontally moving base as shown in the adjacent image. The cart is restricted to linear motion and is subject to forces resulting in or hindering motion. === Essentials of stabilization === The essentials of stabilizing the inverted pendulum can be summarized qualitatively in three steps. 1. If the tilt angle θ {\displaystyle \theta } is to the right, the cart must accelerate to the right and vice versa. 2. The position of the cart x {\displaystyle x} relative to track center is stabilized by slightly modulating the null angle (the angle error that the control system tries to null) by the position of the cart, that is, null angle = θ + k x {\displaystyle =\theta +kx} where k {\displaystyle k} is small. This makes the pole want to lean slightly toward track center and stabilize at track center where the tilt angle is exactly vertical. Any offset in the tilt sensor or track slope that would otherwise cause instability translates into a stable position offset. A further added offset gives position control. 3. A normal pendulum subject to a moving pivot point such as a load lifted by a crane, has a peaked response at the pendulum radian frequency of ω p = g / ℓ {\displaystyle \omega _{p}={\sqrt {g/\ell }}} . To prevent uncontrolled swinging, the frequency spectrum of the pivot motion should be suppressed near ω p {\displaystyle \omega _{p}} . The inverted pendulum requires the same suppression filter to achieve stability. As a consequence of the null angle modulation strategy, the position feedback is positive, that is, a sudden command to move right produces an initial cart motion to the left followed by a move right to rebalance the pendulum. The interaction of the pendulum instability and the positive position feedback instability to produce a stable system is a feature that makes the mathematical analysis an interesting and challenging problem. === From Lagrange's equations === The equations of motion c

  Read more →
• 

  Supervisor Mode Access Prevention

  Supervisor Mode Access Prevention (SMAP) is a feature of some CPU implementations such as the Intel Broadwell microarchitecture that allows supervisor mode programs to optionally set user-space memory mappings so that access to those mappings from supervisor mode will cause a trap. This makes it harder for malicious programs to "trick" the kernel into using instructions or data from a user-space program. == History == Supervisor Mode Access Prevention is designed to complement Supervisor Mode Execution Prevention (SMEP), which was introduced earlier. SMEP can be used to prevent supervisor mode from unintentionally executing user-space code. SMAP extends this protection to reads and writes. == Benefits == Without Supervisor Mode Access Prevention, supervisor code usually has full read and write access to user-space memory mappings (or has the ability to obtain full access). This has led to the development of several security exploits, including privilege escalation exploits, which operate by causing the kernel to access user-space memory when it did not intend to. Operating systems can block these exploits by using SMAP to force unintended user-space memory accesses to trigger page faults. Additionally, SMAP can expose flawed kernel code which does not follow the intended procedures for accessing user-space memory. However, the use of SMAP in an operating system may lead to a larger kernel size and slower user-space memory accesses from supervisor code, because SMAP must be temporarily disabled any time supervisor code intends to access user-space memory. == Technical details == Processors indicate support for Supervisor Mode Access Prevention through the Extended Features CPUID leaf. SMAP is enabled when memory paging is active and the SMAP bit in the CR4 control register is set. SMAP can be temporarily disabled for explicit memory accesses by setting the EFLAGS.AC (Alignment Check) flag. The stac (Set AC Flag) and clac (Clear AC Flag) instructions can be used to easily set or clear the flag. When the SMAP bit in CR4 is set, explicit memory reads and writes to user-mode pages performed by code running with a privilege level less than 3 will always result in a page fault if the EFLAGS.AC flag is not set. Implicit reads and writes (such as those made to descriptor tables) to user-mode pages will always trigger a page fault if SMAP is enabled, regardless of the value of EFLAGS.AC. == Operating system support == Linux kernel support for Supervisor Mode Access Prevention was implemented by H. Peter Anvin. It was merged into the mainline Linux 3.7 kernel (released December 2012) and it is enabled by default for processors which support the feature. FreeBSD has supported Supervisor Mode Execution Prevention since 2012 and Supervisor Mode Access Prevention since 2018. OpenBSD has supported Supervisor Mode Access Prevention and the related Supervisor Mode Execution Prevention since 2012, with OpenBSD 5.3 being the first release with support for the feature enabled. NetBSD support for Supervisor Mode Execution Prevention (SMEP) was implemented by Maxime Villard in December 2015. Support for Supervisor Mode Access Prevention (SMAP) was also implemented by Maxime Villard, in August 2017. NetBSD 8.0 was the first release with both features supported and enabled. Haiku support for Supervisor Mode Execution Prevention (SMEP) was implemented by Jérôme Duval in January 2018. macOS has support for SMAP at least since macOS 10.13 released 2017.

  Read more →
• 

  Tensor sketch

  In statistics, machine learning and algorithms, a tensor sketch is a type of dimensionality reduction that is particularly efficient when applied to vectors that have tensor structure. Such a sketch can be used to speed up explicit kernel methods, bilinear pooling in neural networks and is a cornerstone in many numerical linear algebra algorithms. == Mathematical definition == Mathematically, a dimensionality reduction or sketching matrix is a matrix M ∈ R k × d {\displaystyle M\in \mathbb {R} ^{k\times d}} , where k < d {\displaystyle k Read more →

• 

  Elastic map

  Elastic maps provide a tool for nonlinear dimensionality reduction. By their construction, they are a system of elastic springs embedded in the data space. This system approximates a low-dimensional manifold. The elastic coefficients of this system allow the switch from completely unstructured k-means clustering (zero elasticity) to the estimators located closely to linear PCA manifolds (for high bending and low stretching modules). With some intermediate values of the elasticity coefficients, this system effectively approximates non-linear principal manifolds. This approach is based on a mechanical analogy between principal manifolds, that are passing through "the middle" of the data distribution, and elastic membranes and plates. The method was developed by A.N. Gorban, A.Y. Zinovyev and A.A. Pitenko in 1996–1998. == Energy of elastic map == Let S {\displaystyle {\mathcal {S}}} be a data set in a finite-dimensional Euclidean space. Elastic map is represented by a set of nodes w j {\displaystyle {\bf {w}}_{j}} in the same space. Each datapoint s ∈ S {\displaystyle s\in {\mathcal {S}}} has a host node, namely the closest node w j {\displaystyle {\bf {w}}_{j}} (if there are several closest nodes then one takes the node with the smallest number). The data set S {\displaystyle {\mathcal {S}}} is divided into classes K j = { s | w j is a host of s } {\displaystyle K_{j}=\{s\ |\ {\bf {w}}_{j}{\mbox{ is a host of }}s\}} . The approximation energy D is the distortion D = 1 2 ∑ j = 1 k ∑ s ∈ K j ‖ s − w j ‖ 2 {\displaystyle D={\frac {1}{2}}\sum _{j=1}^{k}\sum _{s\in K_{j}}\|s-{\bf {w}}_{j}\|^{2}} , which is the energy of the springs with unit elasticity which connect each data point with its host node. It is possible to apply weighting factors to the terms of this sum, for example to reflect the standard deviation of the probability density function of any subset of data points { s i } {\displaystyle \{s_{i}\}} . On the set of nodes an additional structure is defined. Some pairs of nodes, ( w i , w j ) {\displaystyle ({\bf {w}}_{i},{\bf {w}}_{j})} , are connected by elastic edges. Call this set of pairs E {\displaystyle E} . Some triplets of nodes, ( w i , w j , w k ) {\displaystyle ({\bf {w}}_{i},{\bf {w}}_{j},{\bf {w}}_{k})} , form bending ribs. Call this set of triplets G {\displaystyle G} . The stretching energy is U E = 1 2 λ ∑ ( w i , w j ) ∈ E ‖ w i − w j ‖ 2 {\displaystyle U_{E}={\frac {1}{2}}\lambda \sum _{({\bf {w}}_{i},{\bf {w}}_{j})\in E}\|{\bf {w}}_{i}-{\bf {w}}_{j}\|^{2}} , The bending energy is U G = 1 2 μ ∑ ( w i , w j , w k ) ∈ G ‖ w i − 2 w j + w k ‖ 2 {\displaystyle U_{G}={\frac {1}{2}}\mu \sum _{({\bf {w}}_{i},{\bf {w}}_{j},{\bf {w}}_{k})\in G}\|{\bf {w}}_{i}-2{\bf {w}}_{j}+{\bf {w}}_{k}\|^{2}} , where λ {\displaystyle \lambda } and μ {\displaystyle \mu } are the stretching and bending moduli respectively. The stretching energy is sometimes referred to as the membrane, while the bending energy is referred to as the thin plate term. For example, on the 2D rectangular grid the elastic edges are just vertical and horizontal edges (pairs of closest vertices) and the bending ribs are the vertical or horizontal triplets of consecutive (closest) vertices. The total energy of the elastic map is thus U = D + U E + U G . {\displaystyle U=D+U_{E}+U_{G}.} The position of the nodes { w j } {\displaystyle \{{\bf {w}}_{j}\}} is determined by the mechanical equilibrium of the elastic map, i.e. its location is such that it minimizes the total energy U {\displaystyle U} . == Expectation-maximization algorithm == For a given splitting of dataset S {\displaystyle {\mathcal {S}}} in classes K j {\displaystyle K_{j}} , minimization of the quadratic functional U {\displaystyle U} is a linear problem with the sparse matrix of coefficients. Therefore, similar to principal component analysis or k-means, a splitting method is used: For given { w j } {\displaystyle \{{\bf {w}}_{j}\}} find { K j } {\displaystyle \{K_{j}\}} ; For given { K j } {\displaystyle \{K_{j}\}} minimize U {\displaystyle U} and find { w j } {\displaystyle \{{\bf {w}}_{j}\}} ; If no change, terminate. This expectation-maximization algorithm guarantees a local minimum of U {\displaystyle U} . For improving the approximation various additional methods are proposed. For example, the softening strategy is used. This strategy starts with a rigid grids (small length, small bending and large elasticity modules λ {\displaystyle \lambda } and μ {\displaystyle \mu } coefficients) and finishes with soft grids (small λ {\displaystyle \lambda } and μ {\displaystyle \mu } ). The training goes in several epochs, each epoch with its own grid rigidness. Another adaptive strategy is growing net: one starts from a small number of nodes and gradually adds new nodes. Each epoch goes with its own number of nodes. == Applications == Most important applications of the method and free software are in bioinformatics for exploratory data analysis and visualisation of multidimensional data, for data visualisation in economics, social and political sciences, as an auxiliary tool for data mapping in geographic informational systems and for visualisation of data of various nature. The method is applied in quantitative biology for reconstructing the curved surface of a tree leaf from a stack of light microscopy images. This reconstruction is used for quantifying the geodesic distances between trichomes and their patterning, which is a marker of the capability of a plant to resist to pathogenes. Recently, the method is adapted as a support tool in the decision process underlying the selection, optimization, and management of financial portfolios. The method of elastic maps has been systematically tested and compared with several machine learning methods on the applied problem of identification of the flow regime of a gas-liquid flow in a pipe. There are various regimes: Single phase water or air flow, Bubbly flow, Bubbly-slug flow, Slug flow, Slug-churn flow, Churn flow, Churn-annular flow, and Annular flow. The simplest and most common method used to identify the flow regime is visual observation. This approach is, however, subjective and unsuitable for relatively high gas and liquid flow rates. Therefore, the machine learning methods are proposed by many authors. The methods are applied to differential pressure data collected during a calibration process. The method of elastic maps provided a 2D map, where the area of each regime is represented. The comparison with some other machine learning methods is presented in Table 1 for various pipe diameters and pressure. Here, ANN stands for the backpropagation artificial neural networks, SVM stands for the support vector machine, SOM for the self-organizing maps. The hybrid technology was developed for engineering applications. In this technology, elastic maps are used in combination with Principal Component Analysis (PCA), Independent Component Analysis (ICA) and backpropagation ANN. The textbook provides a systematic comparison of elastic maps and self-organizing maps (SOMs) in applications to economic and financial decision-making.

  Read more →
• 

  Defining length

  In the field of genetic algorithms, a schema (plural: schemata) is a template that represents a subset of potential solutions. These templates use fixed symbols (e.g., `0` or `1`) for specific positions and a wildcard or "don't care" symbol (often `#` or ``) for others. The defining length of a schema, denoted as L(H), measures the distance between the outermost fixed positions in the template. According to the Schema theorem, a schema with a shorter defining length is less likely to be disrupted by the genetic operator of crossover. As a result, short schemata are considered more robust and are more likely to be propagated to the next generation. In genetic programming, where solutions are often represented as trees, the defining length is the number of links in the minimum tree fragment that includes all the non-wildcard symbols within a schema H. == Example == The defining length is calculated by subtracting the position of the first fixed symbol from the position of the last one. Using 1-based indexing for a string of length 5: The schema `1##0#` has its first fixed symbol (`1`) at position 1 and its last fixed symbol (`0`) at position 4. Its defining length is 4 − 1 = 3. The schema `00##0` has its first fixed symbol at position 1 and its last at position 5. Its defining length is 5 − 1 = 4. The schema `##0##` has only one fixed symbol at position 3. The first and last fixed positions are the same, so its defining length is 3 − 3 = 0.

  Read more →
• 

  Global serializability

  In concurrency control of databases, transaction processing (transaction management), and other transactional distributed applications, global serializability (or modular serializability) is a property of a global schedule of transactions. A global schedule is the unified schedule of all the individual database (and other transactional object) schedules in a multidatabase environment (e.g., federated database). Complying with global serializability means that the global schedule is serializable, has the serializability property, while each component database (module) has a serializable schedule as well. In other words, a collection of serializable components provides overall system serializability, which is usually incorrect. A need in correctness across databases in multidatabase systems makes global serializability a major goal for global concurrency control (or modular concurrency control). With the proliferation of the Internet, Cloud computing, Grid computing, and small, portable, powerful computing devices (e.g., smartphones), as well as increase in systems management sophistication, the need for atomic distributed transactions and thus effective global serializability techniques, to ensure correctness in and among distributed transactional applications, seems to increase. In a federated database system or any other more loosely defined multidatabase system, which are typically distributed in a communication network, transactions span multiple (and possibly distributed) databases. Enforcing global serializability in such system, where different databases may use different types of concurrency control, is problematic. Even if every local schedule of a single database is serializable, the global schedule of a whole system is not necessarily serializable. The massive communication exchanges of conflict information needed between databases to reach conflict serializability globally would lead to unacceptable performance, primarily due to computer and communication latency. Achieving global serializability effectively over different types of concurrency control has been open for several years. == The global serializability problem == === Problem statement === The difficulties described above translate into the following problem: Find an efficient (high-performance and fault tolerant) method to enforce Global serializability (global conflict serializability) in a heterogeneous distributed environment of multiple autonomous database systems. The database systems may employ different concurrency control methods. No limitation should be imposed on the operations of either local transactions (confined to a single database system) or global transactions (span two or more database systems). === Quotations === Lack of an appropriate solution for the global serializability problem has driven researchers to look for alternatives to serializability as a correctness criterion in a multidatabase environment (e.g., see Relaxing global serializability below), and the problem has been characterized as difficult and open. The following two quotations demonstrate the mindset about it by the end of the year 1991, with similar quotations in numerous other articles: "Without knowledge about local as well as global transactions, it is highly unlikely that efficient global concurrency control can be provided... Additional complications occur when different component DBMSs [Database Management Systems] and the FDBMSs [Federated Database Management Systems] support different concurrency mechanisms... It is unlikely that a theoretically elegant solution that provides conflict serializability without sacrificing performance (i.e., concurrency and/or response time) and availability exists." === Proposed solutions === Several solutions, some partial, have been proposed for the global serializability problem. Among them: Global conflict graph (serializability graph, precedence graph) checking Distributed Two-phase locking (Distributed 2PL) Distributed Timestamp ordering Tickets (local logical timestamps which define local total orders, and are propagated to determine global partial order of transactions) == Relaxing global serializability == Some techniques have been developed for relaxed global serializability (i.e., they do not guarantee global serializability; see also Relaxing serializability). Among them (with several publications each): Quasi serializability Two-level serializability Another common reason nowadays for Global serializability relaxation is the requirement of availability of internet products and services. This requirement is typically answered by large scale data replication. The straightforward solution for synchronizing replicas' updates of a same database object is including all these updates in a single atomic distributed transaction. However, with many replicas such a transaction is very large, and may span several computers and networks that some of them are likely to be unavailable. Thus such a transaction is likely to end with abort and miss its purpose. Consequently, Optimistic replication (Lazy replication) is often utilized (e.g., in many products and services by Google, Amazon, Yahoo, and alike), while global serializability is relaxed and compromised for eventual consistency. In this case relaxation is done only for applications that are not expected to be harmed by it. Classes of schedules defined by relaxed global serializability properties either contain the global serializability class, or are incomparable with it. What differentiates techniques for relaxed global conflict serializability (RGCSR) properties from those of relaxed conflict serializability (RCSR) properties that are not RGCSR is typically the different way global cycles (span two or more databases) in the global conflict graph are handled. No distinction between global and local cycles exists for RCSR properties that are not RGCSR. RCSR contains RGCSR. Typically RGCSR techniques eliminate local cycles, i.e., provide local serializability (which can be achieved effectively by regular, known concurrency control methods); however, obviously they do not eliminate all global cycles (which would achieve global serializability).

  Read more →
• 

  Ensemble learning

  In statistics and machine learning, ensemble methods use multiple learning algorithms to obtain better predictive performance than could be obtained from any of the constituent learning algorithms alone. Unlike a statistical ensemble in statistical mechanics, which is usually infinite, a machine learning ensemble consists of only a concrete finite set of alternative models, but typically allows for much more flexible structure to exist among those alternatives. == Overview == Supervised learning algorithms search through a hypothesis space to find a suitable hypothesis that will make good predictions with a particular problem. Even if this space contains hypotheses that are very well-suited for a particular problem, it may be very difficult to find a good one. Ensembles combine multiple hypotheses to form one which should be theoretically better. Ensemble learning trains two or more machine learning algorithms on a specific classification or regression task. The algorithms within the ensemble model are generally referred as "base models", "base learners", or "weak learners" in literature. These base models can be constructed using a single modelling algorithm, or several different algorithms. The idea is to train a diverse set of weak models on the same modelling task, such that the outputs of each weak learner have poor predictive ability (i.e., high bias), and among all weak learners, the outcome and error values exhibit high variance. Fundamentally, an ensemble learning model trains at least two high-bias (weak) and high-variance (diverse) models to be combined into a better-performing model. The set of weak models — which would not produce satisfactory predictive results individually — are combined or averaged to produce a single, high performing, accurate, and low-variance model to fit the task as required. Ensemble learning typically refers to bagging (bootstrap aggregating), boosting or stacking/blending techniques to induce high variance among the base models. Bagging creates diversity by generating random samples from the training observations and fitting the same model to each different sample — also known as homogeneous parallel ensembles. Boosting follows an iterative process by sequentially training each base model on the up-weighted errors of the previous base model, producing an additive model to reduce the final model errors — also known as sequential ensemble learning. Stacking or blending consists of different base models, each trained independently (i.e. diverse/high variance) to be combined into the ensemble model — producing a heterogeneous parallel ensemble. Common applications of ensemble learning include random forests (an extension of bagging), Boosted Tree models, and Gradient Boosted Tree Models. Models in applications of stacking are generally more task-specific — such as combining clustering techniques with other parametric and/or non-parametric techniques. Evaluating the prediction of an ensemble typically requires more computation than evaluating the prediction of a single model. In one sense, ensemble learning may be thought of as a way to compensate for poor learning algorithms by performing a lot of extra computation. On the other hand, the alternative is to do a lot more learning with one non-ensemble model. An ensemble may be more efficient at improving overall accuracy for the same increase in compute, storage, or communication resources by using that increase on two or more methods, than would have been improved by increasing resource use for a single method. Fast algorithms such as decision trees are commonly used in ensemble methods (e.g., random forests), although slower algorithms can benefit from ensemble techniques as well. By analogy, ensemble techniques have been used also in unsupervised learning scenarios, for example in consensus clustering or in anomaly detection. == Ensemble theory == Empirically, ensembles tend to yield better results when there is a significant diversity among the models. Many ensemble methods, therefore, seek to promote diversity among the models they combine. Although perhaps non-intuitive, more random algorithms (like random decision trees) can be used to produce a stronger ensemble than very deliberate algorithms (like entropy-reducing decision trees). Using a variety of strong learning algorithms, however, has been shown to be more effective than using techniques that attempt to dumb-down the models in order to promote diversity. It is possible to increase diversity in the training stage of the model using correlation for regression tasks or using information measures such as cross entropy for classification tasks. Theoretically, one can justify the diversity concept because the lower bound of the error rate of an ensemble system can be decomposed into accuracy, diversity, and the other term. === The geometric framework === Ensemble learning, including both regression and classification tasks, can be explained using a geometric framework. Within this framework, the output of each individual classifier or regressor for the entire dataset can be viewed as a point in a multi-dimensional space. Additionally, the target result is also represented as a point in this space, referred to as the "ideal point." The Euclidean distance is used as the metric to measure both the performance of a single classifier or regressor (the distance between its point and the ideal point) and the dissimilarity between two classifiers or regressors (the distance between their respective points). This perspective transforms ensemble learning into a deterministic problem. For example, within this geometric framework, it can be proved that the averaging of the outputs (scores) of all base classifiers or regressors can lead to equal or better results than the average of all the individual models. It can also be proved that if the optimal weighting scheme is used, then a weighted averaging approach can outperform any of the individual classifiers or regressors that make up the ensemble or as good as the best performer at least. == Ensemble size == While the number of component classifiers of an ensemble has a great impact on the accuracy of prediction, there is a limited number of studies addressing this problem. A priori determining of ensemble size and the volume and velocity of big data streams make this even more crucial for online ensemble classifiers. Mostly statistical tests were used for determining the proper number of components. More recently, a theoretical framework suggested that there is an ideal number of component classifiers for an ensemble such that having more or less than this number of classifiers would deteriorate the accuracy. It is called "the law of diminishing returns in ensemble construction." Their theoretical framework shows that using the same number of independent component classifiers as class labels gives the highest accuracy. == Common types of ensembles == === Bayes optimal classifier === The Bayes optimal classifier is a classification technique. It is an ensemble of all the hypotheses in the hypothesis space. On average, no other ensemble can outperform it. The Naive Bayes classifier is a version of this that assumes that the data is conditionally independent on the class and makes the computation more feasible. Each hypothesis is given a vote proportional to the likelihood that the training dataset would be sampled from a system if that hypothesis were true. To facilitate training data of finite size, the vote of each hypothesis is also multiplied by the prior probability of that hypothesis. The Bayes optimal classifier can be expressed with the following equation: y = a r g m a x c j ∈ C ∑ h i ∈ H P ( c j | h i ) P ( T | h i ) P ( h i ) {\displaystyle y={\underset {c_{j}\in C}{\mathrm {argmax} }}\sum _{h_{i}\in H}{P(c_{j}|h_{i})P(T|h_{i})P(h_{i})}} where y {\displaystyle y} is the predicted class, C {\displaystyle C} is the set of all possible classes, H {\displaystyle H} is the hypothesis space, P {\displaystyle P} refers to a probability, and T {\displaystyle T} is the training data. As an ensemble, the Bayes optimal classifier represents a hypothesis that is not necessarily in H {\displaystyle H} . The hypothesis represented by the Bayes optimal classifier, however, is the optimal hypothesis in ensemble space (the space of all possible ensembles consisting only of hypotheses in H {\displaystyle H} ). This formula can be restated using Bayes' theorem, which says that the posterior is proportional to the likelihood times the prior: P ( h i | T ) ∝ P ( T | h i ) P ( h i ) {\displaystyle P(h_{i}|T)\propto P(T|h_{i})P(h_{i})} hence, y = a r g m a x c j ∈ C ∑ h i ∈ H P ( c j | h i ) P ( h i | T ) {\displaystyle y={\underset {c_{j}\in C}{\mathrm {argmax} }}\sum _{h_{i}\in H}{P(c_{j}|h_{i})P(h_{i}|T)}} === Bootstrap aggregating (bagging) === Bootstrap aggregation (bagging) involves training an ensemble on bootstrapped data sets. A bootstrapped set is cr

  Read more →
• 

  Multidimensional analysis

  In statistics, econometrics and related fields, multidimensional analysis (MDA) is a data analysis process that groups data into two categories: data dimensions and measurements. For example, a data set consisting of the number of wins for a single football team at each of several years is a single-dimensional (in this case, longitudinal) data set. A data set consisting of the number of wins for several football teams in a single year is also a single-dimensional (in this case, cross-sectional) data set. A data set consisting of the number of wins for several football teams over several years is a two-dimensional data set. == Higher dimensions == In many disciplines, two-dimensional data sets are also called panel data. While, strictly speaking, two- and higher-dimensional data sets are "multi-dimensional", the term "multidimensional" tends to be applied only to data sets with three or more dimensions. For example, some forecast data sets provide forecasts for multiple target periods, conducted by multiple forecasters, and made at multiple horizons. The three dimensions provide more information than can be gleaned from two-dimensional panel data sets. == Software == Computer software for MDA include Online analytical processing (OLAP) for data in relational databases, pivot tables for data in spreadsheets, and Array DBMSs for general multi-dimensional data (such as raster data) in science, engineering, and business.

  Read more →