AI Generator Zootopia

AI Generator Zootopia — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Workplace robotics safety

  Workplace robotics safety is an aspect of occupational safety and health when robots are used in the workplace. This includes traditional industrial robots as well as emerging technologies such as drone aircraft and wearable robotic exoskeletons. Types of accidents include collisions, crushing, and injuries from mechanical parts. Hazard controls include physical barriers, good work practices, and proper maintenance. == Background == Many workplace robots are industrial robots used in manufacturing. According to the International Federation of Robotics, 1.7 million new robots are expected to be used in factories between 2017 and 2020. Emerging robot technologies include collaborative robots, personal care robots, construction robots, exoskeletons, autonomous vehicles, and drone aircraft (also known as unmanned aerial vehicles or UAVs). Advances in automation technologies (e.g. fixed robots, collaborative and mobile robots, and exoskeletons) have the potential to improve work conditions but also to introduce workplace hazards in manufacturing workplaces. Fifty-six percent of robot injuries are classified as pinch injuries and 44% of injuries are classified as impact injuries. A 1987 study found that line workers are at the greatest risk, followed by maintenance workers, and programmers. Poor workplace design and human error caused most injuries. Despite the lack of occupational surveillance data on injuries associated specifically with robots, researchers from the US National Institute for Occupational Safety and Health (NIOSH) identified 61 robot-related deaths between 1992 and 2015 using keyword searches of the Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries research database (see info from Center for Occupational Robotics Research). Using data from the Bureau of Labor Statistics, NIOSH and its state partners have investigated 4 robot-related fatalities under the Fatality Assessment and Control Evaluation Program. In addition the Occupational Safety and Health Administration (OSHA) has investigated robot-related deaths and injuries, which can be reviewed at OSHA Accident Search page. Injuries and fatalities could increase over time because of the increasing number of collaborative and co-existing robots, powered exoskeletons, and autonomous vehicles into the work environment. Safety standards are being developed by the Robotic Industries Association (RIA) in conjunction with the American National Standards Institute (ANSI). On October 5, 2017, OSHA, NIOSH and RIA signed an alliance to work together to enhance technical expertise, identify and help address potential workplace hazards associated with traditional industrial robots and the emerging technology of human-robot collaboration installations and systems, and help identify needed research to reduce workplace hazards. On October 16 NIOSH launched the Center for Occupational Robotics Research to "provide scientific leadership to guide the development and use of occupational robots that enhance worker safety, health, and well being". So far, the research needs identified by NIOSH and its partners include: tracking and preventing injuries and fatalities, intervention and dissemination strategies to promote safe machine control and maintenance procedures, and on translating effective evidence-based interventions into workplace practice. == Hazards == Many hazards and injuries can result from the use of robots in the workplace. Some robots, notably those in a traditional industrial environment, are fast and powerful. This increases the potential for injury as one swing from a robotic arm, for example, could cause serious bodily harm. There are additional risks when a robot malfunctions or is in need of maintenance. A worker who is working on the robot may be injured because a malfunctioning robot is typically unpredictable. For example, a robotic arm that is part of a car assembly line may experience a jammed motor. A worker who is working to fix the jam may suddenly get hit by the arm the moment it becomes unjammed. Additionally, if a worker is standing in a zone that is overlapping with nearby robotic arms, he or she may get injured by other moving equipment. There are four types of accidents that can occur with robots: impact or collision accidents, crushing and trapping accidents, mechanical part accidents, and other accidents. Impact or collision accidents occur generally from malfunctions and unpredicted changes. Crushing and trapping accidents occur when a part of a worker's body becomes trapped or caught on robotic equipment. Mechanical part accidents can occur when a robot malfunctions and starts to "break down", where the ejection of parts or exposed wire can cause serious injury. Other accidents at just general accidents that occur from working with robots. There are seven sources of hazards that are associated with human interaction with robots and machines: human errors, control errors, unauthorized access, mechanical failures, environmental sources, power systems, and improper installation. Human errors could be anything from one line of incorrect code to a loose bolt on a robotic arm. Many hazards can stem from human-based error. Control errors are intrinsic and are usually not controllable nor predictable. Unauthorized access hazards occur when a person who is not familiar with the area enters the domain of a robot. Mechanical failures can happen at any time, and a faulty unit is usually unpredictable. Environmental sources are things such as electromagnetic or radio interference in the environment that can cause a robot to malfunction. Power systems are pneumatic, hydraulic, or electrical power sources; these power sources can malfunction and cause fires, leaks, or electrical shocks. Improper installation is fairly self-explanatory; a loose bolt or an exposed wire can lead to inherent hazards. === Emerging technologies === Emerging robotic technologies can reduce hazards to workers, but can also introduce new hazards. For example, robotic exoskeletons can be used in construction to reduce load to the spine, improve posture, and reduce fatigue; however, they can also increase chest pressure, limit mobility when moving out of the way of a falling object, and cause balance problems. Unmanned aerial vehicles are being used in the construction industry to do monitoring and inspections of buildings under construction. This reduces the need for humans to be in hazardous locations, but the risk of a UAV collision presents a hazard to workers. For collaborative robots, isolation is not possible. Possible hazard controls include collision avoidance systems, and making the robot less stiff to lessen the impact force. Robotic tech vest is a wearable device for humans, worn in Amazon warehouses. == Hazard controls == There are a few ways to prevent injuries by implementing hazard controls. There can be risk assessments at each of the various stages of a robot's development. Risk assessments can help gather information about a robot's status, how well it is being maintained, and if repairs are needed soon. By being aware of the status of a robot, injuries can be prevented and hazards reduced. Safeguarding devices can be implemented to reduce the risk of injuries. These can include engineering controls such as physical barriers, guard rails, presence-sensing safeguarding devices, etc. Awareness devices are usually used in conjunction with safeguarding devices. They are usually a system of rope or chain barriers with lights, signs, whistles, and horns. Their purpose it to be able to alert workers or personnel of certain dangers. Operator safeguards can also be in place. These usually utilize safeguarding devices to protect the operator and reduce risk of injury. Additionally, when an operator is within close proximity of a robot, the working speed of the robot can be reduced to ensure that the operator is in full control. This can be done by placing the robot in the manual or teach mode. It is also crucial to inform the programmer of the robot of what type of work the robot will be doing, how it will interact with other robots, and how it will work in relation to an operator. Proper maintenance of robotic equipment is also critical in order to reduce hazards. Maintaining a robot insures that it continues to function properly, thereby reducing the risks associated with a malfunction. One common safeguard used in industrial settings is the installation of robot safety fencing. These barriers, often made from durable materials such as mesh or polycarbonate, prevent accidental interactions between workers and robotic systems, reducing the risk of injury. Robot safety fencing is particularly important in environments where high-speed or powerful robots are used. == Regulations == Some existing regulations regarding robots and robotic systems include: ANSI/RIA R15.06 OSHA 29 CFR 1910.333 OSHA 29 CFR 1910.147 ISO 10218 ISO/TS 15066 ISO/DIS 13482

  Read more →
• 

  Bob Coecke

  Bob Coecke (born 23 July 1968) is a Belgian theoretical physicist and logician. He was Professor of Quantum foundations, Logics, and Structures at Oxford University until 2020. He was Chief Scientist at quantum computing company Quantinuum, until 2025 and founded a startup called Relational Intelligence in 2026. He is also Distinguished Visiting Research Chair at the Perimeter Institute for Theoretical Physics, and Emeritus Fellow at Wolfson College, Oxford. He pioneered categorical quantum mechanics (entry 18M40 in Mathematics Subject Classification 2020), Quantum Picturalism, ZX-calculus, DisCoCat model for natural language,, quantum natural language processing (QNLP) and quantum education through the book Quantum in Pictures. He is a founder of the Quantum Physics and Logic community and the Applied Category Theory communities and conference series, and of the journal Compositionality. Coecke is also a composer and musician, who has been called a pioneer of industrial music, and is also one of the pioneers of employing quantum computers in music. == Education and career == Coecke obtained his doctorate in sciences at the Vrije Universiteit Brussel in 1996, and performed postdoctoral work in the Theoretical Physics Group of Imperial College, London in the Category Theory Group of the Mathematics and Statistics Department at McGill University in Montreal, in the Department of Pure Mathematics and Mathematical Statistics of Cambridge University, and in the Department of Computer Science, University of Oxford. He was an EPSRC Advanced Research Fellow at the Department of Computer Science, University of Oxford, where he became Lecturer in Quantum Computer Science in 2007, and jointly with Samson Abramsky built and headed the Quantum Group. In July 2011, he was nominated professor of Quantum Foundations, Logics and Structures at Oxford University, with retroactive effect as of October 2010. He was a Governing Body Fellow of Wolfson College, Oxford since 2007, where he now is an Emeritus Fellow. In January 2019, Coecke became Senior Scientific Advisor of Cambridge Quantum Computing, and in January 2021 he resigned from his Professorship at Oxford, to become Chief Scientist of Cambridge Quantum Computing. After the merger of Cambridge Quantum Computing with Honeywell Quantum Systems, he stayed on as Chief Scientist of the joint entity Quantinuum until 2025. In January 2023 he also became Distinguished Visiting Research Chair at the Perimeter Institute for Theoretical Physics. == Work == Coecke's research focuses on the foundations of physics, more particularly category theory, logic, and diagrammatic reasoning, with application to quantum informatics, quantum gravity, and NLP. He has pioneered categorical quantum mechanics together with Samson Abramsky, and spearheaded the development of a diagrammatic quantum formalism based on Penrose graphical notation, on which he wrote a textbook entitled Picturing Quantum Processes with Aleks Kissinger. With Ross Duncan he pioneered ZX-calculus. He pioneered the DisCoCat model for natural language, with Stephen Clark and Mehrnoosh Sadrzadeh. He also pioneered quantum natural language processing (QNLP), with Will Zeng, and colleagues at Cambridge Quantum Computing. == Music == Coecke is also a musician, performing and recording since the eighties. He retrospectively has been named a pioneer of industrial music. His band, Black Tish, "used cutting edge sampling techniques for the time, a host of synth and sound loops and metal-style guitars to create a heavy rock/electronica fusion unlike anything heard before", and "bridge the gap between the pure experimental nature of bands like Throbbing Gristle and Einstürzende Neubauten and the (comparatively) more radio accessible Ministry or Nine Inch Nails". Coecke is also one of the pioneers of employing quantum computers in music. == Selected publications == Textbooks Bob Coecke, Aleks Kissinger:Picturing Quantum Processes. A First Course in Quantum Theory and Diagrammatic Reasoning, Cambridge University Press, 2017, ISBN 978-1316219317 Bob Coecke, Stefano Gogioso:Quantum in Pictures, Quantinuum, 2022, ISBN 978-1-7392147-1-5 Books (as editor) Bob Coecke, David Moore, Alexander Wilce (eds.): Current Research in Operational Quantum Logic: Algebras, Categories, Languages, Fundamental Theories of Physics, Kluwer Academic, 2010, ISBN 978-9048154371 Bob Coecke (ed.): New Structures for Physics, Lecture Notes in Physics 813, Springer, 2011, ISBN 978-3642128202 Articles Bob Coecke: Kindergarten quantum mechanics, arXiv:quant-ph/0510032 Samson Abramsky, Bob Coecke: A categorical semantics of quantum protocols, Proceedings of the 19th Annual IEEE Symposium on Logic in Computer Science, 2004, pp. 415–425 Bob Coecke, Ross Duncan: Interacting quantum observables, Automata, Languages and Programming, pp. 298–310, 2008 Konstantinos Meichanetzidis, Alexis Toumi, Giovanni de Felice, Bob Coecke: Grammar-Aware Question-Answering on Quantum Computers, arXiv:2012.03756 Bob Coecke: The Mathematics of Text Structure, arXiv:1904.03478 Will Zeng, Bob Coecke: Quantum Algorithms for Compositional Natural Language Processing, arXiv:1608.01406 Bob Coecke, Tobias Fritz, Robert Spekkens: A mathematical theory of resources, arXiv:1409.5531 Bob Coecke: An Alternative Gospel of structure: order, composition, processes, arxiv:1307.4038 Bob Coecke, Mehrnoosh Sadrzadeh, Steven Clark: Mathematical Foundations for a Compositional Distributional Model of Meaning, arXiv:1003.4394 Bob Coecke: Quantum Picturalism, arXiv:0908.1787 Software articles Eduardo Reck Miranda, Richie Yeung, Anna Pearson, Konstantinos Meichanetzidis, Bob Coecke: A quantum natural language processing approach to musical intelligence, arXiv:2111.06741 Dimitri Kartsaklis, Ian Fan, Richie Yeung, Anna Pearson, Robin Lorenz, Alexis Toumi, Giovanni de Felice, Konstantinos Meichanetzidis, Stephen Clark, Bob Coecke: lambeq: An efficient high-level python library for quantum NLP, arXiv:2110.04236 Giovanni de Felice, Alexis Toumi, Bob Coecke: Discopy: monoidal categories in Python, arXiv:2111.06741

  Read more →
• 

  AI Image Generators Reviews: What Actually Works in 2026

  Trying to pick the best AI image generator? An AI image generator is software that uses machine learning to help you get more done — it scales effortlessly from a single task to thousands. The best picks balance beginner-friendly simplicity with the depth power users need, and they ship updates often. Whether you are a beginner or a pro, the right AI image generator slots into your workflow and pays for itself fast. Read on for hands-on impressions, pricing tiers, and the standout features that matter.

  Read more →
• 

  Isabelle Guyon

  Isabelle Guyon (French pronunciation: [izabɛl ɡɥijɔ̃]; born August 15, 1961) is a French-born researcher in machine learning known for her work on support-vector machines, artificial neural networks and bioinformatics. She is a Chair Professor at the University of Paris-Saclay. Guyon serves as the Director of Research at Google DeepMind since October 2022. She is considered to be a pioneer in the field, with her contribution to the support-vector machines with Vladimir Vapnik and Bernhard Boser. == Biography == After graduating from the French engineering school ESPCI Paris in 1985, she joined the group of Gerard Dreyfus at the Université Pierre-et-Marie-Curie to do a PhD on neural networks architectures and training. Guyon defended her thesis in 1988 and was hired the year after at AT&T Bell Laboratories, first as a post-doc, then as a group leader. She worked at Bell Labs for six years, where she explored several research areas, from neural networks to pattern recognition and computational learning theory, with application to handwriting recognition. She collaborated with Yann LeCun, Léon Bottou, Vladimir Vapnik, Corinna Cortes, Yoshua Bengio, Patrice Simard, and met her future husband, Bernhard Boser. In 1996, Guyon left Bell Labs and raised her children at Berkeley, California. In Berkeley, she created her own machine learning consulting company, Clopinet. She became interested in medical applications, and used her previous work to classify the genes responsible for different types of cancers. Since 2003, Guyon has organized many challenges in data science, in order to stimulate research in this field. She founded ChaLearn in 2011, a non-profit organization aimed at creating machine learning challenges open to everyone. She was Program Chair of NeurIPS 2016 and became General Chair of NeurIPS in 2017. She is also Action Editor for the Journal of Machine Learning Research and Series Editor for Series: Challenges in Machine Learning. She is a member of the European Laboratory for Learning and Intelligent Systems. In 2016, Guyon came back to France to take the Chair Professorship in Big data between the University of Paris-Saclay and INRIA. She works in TAU (TAckling the Underspecified), a research collaboration of the Laboratoire de recherche en informatique. Together with Bernhard Schölkopf and Vladimir Vapnik, she received in 2020 the BBVA Foundation Frontiers of Knowledge Awards for her work in machine learning. == Scientific work == Guyon has worked in many subfields of machine learning, including neural networks, support-vector machines, feature selection and applications of machine learning to biology. === Support-vector machines === Among her most notable contributions, Guyon co-invented support-vector machines (SVM) in 1992, with Bernhard Boser and Vladimir Vapnik. SVM is a supervised machine learning algorithm, comparable to neural networks or decision trees, which has quickly become a classical technique in machine learning. SVMs have especially contributed to the popularization of kernel methods. === Neural networks === During her years at Bell Labs, Guyon took part of numerous projects involving neural networks. In particular, she wrote some of the first papers on the use of neural network for handwriting recognition using the MNIST database. She is also a co-inventor of the siamese neural networks, a neural network architecture used to learn similarities, with applications to signature, face or object recognition. === Machine learning for biology === Guyon is the author of many publications at the intersection of biology (cancer research and genomics) and artificial intelligence. She has notably introduced the use of support-vector machines to detect cancer using genes. === Machine learning challenges === Through her non-profit organization ChaLearn, Guyon has organized and directed challenges open to everyone in order to solve open problems in machine learning, including computer vision, neurosciences, particle physics, feature selection, causality and automated machine learning. Most of the challenges organized by ChaLearn have resulted in publications. Among the most cited ones are: Guyon et al., Result analysis of the NIPS 2003 feature selection challenge, Advances in neural information processing systems, 2005, link Escalera et al., ChaLearn Looking at People Challenge 2014: Dataset and Results, Computer Vision - ECCV 2014 Workshops, Springer International Publishing, 2014, link Guyon et al., A brief Review of the ChaLearn AutoML Challenge, JMLR: Workshop and Conference Proceedings 64:21-30, 2016, link Adam-Bourdario et al., The Higgs boson machine learning challenge, JMLR: Workshop and Conference Proceedings 42:19-55, 2015, link == Private life == She is married to Bernhard Boser, a professor at UC Berkeley. She has twins and one daughter, all three of whom have completed a science degree. Guyon has three citizenships: French by birth, Swiss by marriage and American by naturalization. == Awards and honors == Nomination at the French Academy of technologies (2024) Recipient of the BBVA Foundation Frontiers of Knowledge Awards (2020) American Medical Informatics Association Fellow (2011) == Publications == Bernhard Boser, Isabelle Guyon and Vladmir Vapnik, A training algorithm for optimal margin classifiers, Proceedings of the fifth annual workshop on Computational learning theory, 1992, doi:10.1145/130385.130401 Jane Bromley, Isabelle Guyon, Yann LeCun, Eduard Säckinger and Roopak Shah, Signature verification using a" siamese" time delay neural network, Advances in Neural Information Processing Systems, 1994. Isabelle Guyon and André Elisseeff, An introduction to variable and feature selection, Journal of Machine Learning Research, 2003. Isabelle Guyon, Jason Weston, Stephen Barnhill and Vladimir Vapnik, Gene selection for cancer classification using support vector machines, Machine Learning, Kluwer Academic Publishers, 2002, doi:10.1023/A:1012487302797

  Read more →
• 

  Circular thresholding

  Circular thresholding is an algorithm for automatic image threshold selection in image processing. Most threshold selection algorithms assume that the values (e.g. intensities) lie on a linear scale. However, some quantities such as hue and orientation are a circular quantity, and therefore require circular thresholding algorithms. The example shows that the standard linear version of Otsu's method when applied to the hue channel of an image of blood cells fails to correctly segment the large white blood cells (leukocytes). In contrast the white blood cells are correctly segmented by the circular version of Otsu's method. == Methods == There are a relatively small number of circular image threshold selection algorithms. The following examples are all based on Otsu's method for linear histograms: (Tseng, Li and Tung 1995) smooth the circular histogram, and apply Otsu's method. The histogram is cyclically rotated so that the selected threshold is shifted to zero. Otsu's method and histogram rotation are applied iteratively until several heuristics involving class size, threshold location, and class variance are satisfied. (Wu et al. 2006) smooth the circular histogram until it contains only two peaks. The histogram is cyclically rotated so that the midpoint between the peaks is shifted to zero. Otsu's method and histogram rotation are applied iteratively until convergence of the threshold. (Lai and Rosin 2014) applied Otsu's method to the circular histogram. For the two class circular thresholding task they showed that, for a histogram with an even number of bins, the optimal solution for Otsu's criterion of within-class variance is obtained when the histogram is split into two halves. Therefore the optimal solution can be efficiently obtained in linear rather than quadratic time. == References and further reading == D.-C. Tseng, Y.-F. Li, and C.-T. Tung, Circular histogram thresholding for color image segmentation in Proc. Int. Conf. Document Anal. Recognit., 1995, pp. 673–676. J. Wu, P. Zeng, Y. Zhou, and C. Olivier, A novel color image segmentation method and its application to white blood cell image analysis in Proc. Int. Conf. Signal Process., vol. 2. 2006, pp. 16–20. Y.K. Lai, P.L. Rosin, Efficient Circular Thresholding, IEEE Trans. on Image Processing 23(3), 992–1001 (2014). doi:10.1109/TIP.2013.2297014

  Read more →
• 

  Collostructional analysis

  Collostructional analysis is a family of methods developed by (in alphabetical order) Stefan Th. Gries (University of California, Santa Barbara) and Anatol Stefanowitsch (Free University of Berlin). Collostructional analysis aims at measuring the degree of attraction or repulsion that words exhibit to constructions, where the notion of construction has so far been that of Goldberg's construction grammar. == Collostructional methods == Collostructional analysis so far comprises three different methods: collexeme analysis, to measure the degree of attraction/repulsion of a lemma to a slot in one particular construction; distinctive collexeme analysis, to measure the preference of a lemma to one particular construction over another, functionally similar construction; multiple distinctive collexeme analysis extends this approach to more than two alternative constructions; covarying collexeme analysis, to measure the degree of attraction of lemmas in one slot of a construction to lemmas in another slot of the same construction. == Input frequencies == Collostructional analysis requires frequencies of words and constructions and is similar to a wide variety of collocation statistics. It differs from raw frequency counts by providing not only observed co-occurrence frequencies of words and constructions, but also (i) a comparison of the observed frequency to the one expected by chance; thus, collostructional analysis can distinguish attraction and repulsion of words and constructions; (ii) a measure of the strength of the attraction or repulsion; this is usually the log-transformed p-value of a Fisher-Yates exact test. == Versus other collocation statistics == Collostructional analysis differs from most collocation statistics such that (i) it measures not the association of words to words, but of words to syntactic patterns or constructions; thus, it takes syntactic structure more seriously than most collocation-based analyses; (ii) it has so far only used the most precise statistics, namely the Fisher-Yates exact test based on the hypergeometric distribution; thus, unlike t-scores, z-scores, chi-square tests etc., the analysis is not based on, and does not violate, any distributional assumptions.

  Read more →
• 

  Lin-Shan Lee

  Lin-Shan Lee (Chinese: 李琳山; born 23 September 1952) is a Taiwanese computer scientist. == Education and career == Lee earned a bachelor's degree in electrical engineering from National Taiwan University in 1974, and pursued a doctorate in the same subject at Stanford University, graduating in 1977. He subsequently returned to Taiwan and joined the NTU faculty in 1982. Lee is a 1993 fellow of the Institute of Electrical and Electronics Engineers, recognized "[f]or contributions to computer voice input/output techniques for Mandarin Chinese and to engineering education." The International Speech Communication Association elevated him to fellow status in 2010 "[f]or his contributions to Chinese spoken language processing and speech information retrieval, and his service to the speech language community." In 2016, Lee was elected a member of Academia Sinica.

  Read more →
• 

  Transfer-based machine translation

  Transfer-based machine translation is a type of machine translation (MT). It is currently one of the most widely used methods of machine translation. In contrast to the simpler direct model of MT, transfer MT breaks translation into three steps: analysis of the source language text to determine its grammatical structure, transfer of the resulting structure to a structure suitable for generating text in the target language, and finally generation of this text. Transfer-based MT systems are thus capable of using knowledge of the source and target languages. == Design == Both transfer-based and interlingua-based machine translation have the same idea: to make a translation it is necessary to have an intermediate representation that captures the "meaning" of the original sentence in order to generate the correct translation. In interlingua-based MT this intermediate representation must be independent of the languages in question, whereas in transfer-based MT, it has some dependence on the language pair involved. The way in which transfer-based machine translation systems work varies substantially, but in general they follow the same pattern: they apply sets of linguistic rules which are defined as correspondences between the structure of the source language and that of the target language. The first stage involves analysing the input text for morphology and syntax (and sometimes semantics) to create an internal representation. The translation is generated from this representation using both bilingual dictionaries and grammatical rules. It is possible with this translation strategy to obtain fairly high quality translations, with accuracy in the region of 90% (although this is highly dependent on the language pair in question, for example the distance between the two). == Operation == In a rule-based machine translation system the original text is first analysed morphologically and syntactically in order to obtain a syntactic representation. This representation can then be refined to a more abstract level putting emphasis on the parts relevant for translation and ignoring other types of information. The transfer process then converts this final representation (still in the original language) to a representation of the same level of abstraction in the target language. These two representations are referred to as "intermediate" representations. From the target language representation, the stages are then applied in reverse. == Analysis and transformation == Various methods of analysis and transformation can be used before obtaining the final result. Along with these statistical approaches may be augmented generating hybrid systems. The methods which are chosen and the emphasis depends largely on the design of the system, however, most systems include at least the following stages: Morphological analysis. Surface forms of the input text are classified as to part-of-speech (e.g. noun, verb, etc.) and sub-category (number, gender, tense, etc.). All of the possible "analyses" for each surface form are typically made output at this stage, along with the lemma of the word. Lexical categorisation. In any given text some of the words may have more than one meaning, causing ambiguity in analysis. Lexical categorisation looks at the context of a word to try to determine the correct meaning in the context of the input. This can involve part-of-speech tagging and word sense disambiguation. Lexical transfer. This is basically dictionary translation; the source language lemma (perhaps with sense information) is looked up in a bilingual dictionary and the translation is chosen. Structural transfer. While the previous stages deal with words, this stage deals with larger constituents, for example phrases and chunks. Typical features of this stage include concordance of gender and number, and re-ordering of words or phrases. Morphological generation. From the output of the structural transfer stage, the target language surface forms are generated. == Transfer types == One of the main features of transfer-based machine translation systems is a phase that "transfers" an intermediate representation of the text in the original language to an intermediate representation of text in the target language. This can work at one of two levels of linguistic analysis, or somewhere in between. The levels are: Superficial transfer (or syntactic). This level is characterised by transferring "syntactic structures" between the source and target languages. It is suitable for languages in the same family or of the same type, for example in the Romance languages between Spanish, Catalan, French, Italian, etc. Deep transfer (or semantic). This level constructs a semantic representation that is dependent on the source language. This representation can consist of a series of structures which represent the meaning. In these transfer systems predicates are typically produced. The translation also typically requires structural transfer. This level is used to translate between more distantly related languages (e.g. Spanish-English or Spanish-Basque, etc.)

  Read more →
• 

  Candid (app)

  Candid was a mobile app for anonymous discussions. It used machine learning to create personalized newsfeeds of opinions and real conversations, and also for moderation and filtering. Users posted under pseudonyms such as "HyperMantis", "SincereGiraffe", "GroundedTurtle" and "ExuberantRaptor", that are unique for each thread. Founder and CEO Bindu Reddy said that she needed "a place to express myself and engage in discussions where ideas can be debated on their own merits instead of being used to attack me as a person", which Candid tried to solve by redirecting off-topic comments to their appropriate groups, removing spam and flagging negative posts. They used natural language processing to identify hate speech, slander and threats, and removed them accordingly with human intervention. Candid software analyzed topics and tried to flag rumors and lies as such. Users could flag problematic posts and a team of ten contractors would review them individually. With time the system analyzed a user's interactions and give them labels, such as socializer, explorer, positive, influencer, hater, gossip, etc. In June 2017, Candid announced that it would be shut down because its parent company, Post Intelligence, was being acquired. The app was forecast to close on June 23, 2017, but didn't actually close until June 25, 2017.

  Read more →
• 

  How to Choose an AI Text-to-image Tool

  Curious about the best AI text-to-image tool? An AI text-to-image tool is software that uses machine learning to help you get more done — it combines speed, accuracy, and an interface that just works. Hands-on testing shows real-world results vary, so a short free trial is the smartest way to decide. Whether you are a beginner or a pro, the right AI text-to-image tool slots into your workflow and pays for itself fast. Read on for hands-on impressions, pricing tiers, and the standout features that matter.

  Read more →
• 

  Best AI Subtitle Generators in 2026

  Comparing the best AI subtitle generator? An AI subtitle generator is software that uses machine learning to help you get more done — it lowers the barrier so anyone can produce professional output. Privacy matters too: check whether your data trains the model and whether a no-log or enterprise tier is available. Whether you are a beginner or a pro, the right AI subtitle generator slots into your workflow and pays for itself fast. Below we compare features, pricing, and real output so you can choose with confidence.

  Read more →
• 

  Self-verifying finite automaton

  In automata theory, a self-verifying finite automaton (SVFA) is a special kind of a nondeterministic finite automaton (NFA) with a symmetric kind of nondeterminism introduced by Hromkovič and Schnitger. Generally, in self-verifying nondeterminism, each computation path is concluded with any of the three possible answers: yes, no, and I do not know. For each input string, no two paths may give contradictory answers, namely both answers yes and no on the same input are not possible. At least one path must give answer yes or no, and if it is yes then the string is considered accepted. SVFA accept the same class of languages as deterministic finite automata (DFA) and NFA but have different state complexity. == Formal definition == An SVFA is represented formally by a 6-tuple, A=(Q, Σ, Δ, q0, Fa, Fr) such that (Q, Σ, Δ, q0, Fa) is an NFA, and Fa, Fr are disjoint subsets of Q. For each word w = a1a2 … an, a computation is a sequence of states r0,r1, …, rn, in Q with the following conditions: r0 = q0 ri+1 ∈ Δ(ri, ai+1), for i = 0, …, n−1. If rn ∈ Fa then the computation is accepting, and if rn ∈ Fr then the computation is rejecting. There is a requirement that for each w there is at least one accepting computation or at least one rejecting computation but not both. == Results == Each DFA is a SVFA, but not vice versa. Jirásková and Pighizzini proved that for every SVFA of n states, there exists an equivalent DFA of g ( n ) = Θ ( 3 n / 3 ) {\displaystyle g(n)=\Theta (3^{n/3})} states. Furthermore, for each positive integer n, there exists an n-state SVFA such that the minimal equivalent DFA has exactly g ( n ) {\displaystyle g(n)} states. Other results on the state complexity of SVFA were obtained by Jirásková and her colleagues.

  Read more →
• 

  Adversarial machine learning

  Adversarial machine learning is the study of the attacks on machine learning algorithms, and of the defenses against such attacks. Machine learning techniques are mostly designed to work on specific problem sets, under the assumption that the training and test data are generated from the same statistical distribution (IID). However, this assumption is often violated in practical high-stake applications, where users may intentionally supply fabricated data that violates the statistical assumption. Most common attacks in adversarial machine learning include evasion attacks, data poisoning attacks, Byzantine attacks and model extraction. == History == At the MIT Spam Conference in January 2004, John Graham-Cumming showed that a machine-learning spam filter could be used to defeat another machine-learning spam filter by automatically learning which words to add to a spam email to get the email classified as not spam. In 2004, Nilesh Dalvi and others noted that linear classifiers used in spam filters could be defeated by simple "evasion attacks" as spammers inserted "good words" into their spam emails. (Around 2007, some spammers added random noise to fuzz words within "image spam" in order to defeat OCR-based filters.) In 2006, Marco Barreno and others published "Can Machine Learning Be Secure?", outlining a broad taxonomy of attacks. As late as 2013 many researchers continued to hope that non-linear classifiers (such as support vector machines and neural networks) might be robust to adversaries, until Battista Biggio and others demonstrated the first gradient-based attacks on such machine-learning models (2012–2013). In 2012, deep neural networks began to dominate computer vision problems; starting in 2014, Christian Szegedy and others demonstrated that deep neural networks could be fooled by adversaries, again using a gradient-based attack to craft adversarial perturbations. Further work would show that adversarial attacks are harder to produce in uncontrolled environments, due to the different environmental constraints that cancel out the effect of noise. For example, any small rotation or slight illumination on an adversarial image can destroy the adversariality. In addition, researchers such as Google Brain's Nick Frosst point out that it is much easier to make self-driving cars miss stop signs by physically removing the sign itself, rather than creating adversarial examples. Frosst also believes that the adversarial machine learning community incorrectly assumes models trained on a certain data distribution will also perform well on a completely different data distribution. He suggests that a new approach to machine learning should be explored, and is currently working on a unique neural network that has characteristics more similar to human perception than state-of-the-art approaches. While adversarial machine learning continues to be heavily rooted in academia, large tech companies such as Google, Microsoft, and IBM have begun curating documentation and open source code bases to allow others to concretely assess the robustness of machine learning models and minimize the risk of adversarial attacks. === Examples === Examples include attacks in spam filtering, where spam messages are obfuscated through the misspelling of "bad" words or the insertion of "good" words; attacks in computer security, such as obfuscating malware code within network packets or modifying the characteristics of a network flow to mislead intrusion detection; attacks in biometric recognition where fake biometric traits may be exploited to impersonate a legitimate user; or to compromise users' template galleries that adapt to updated traits over time. Researchers showed that by changing only one-pixel it was possible to fool deep learning algorithms. Others 3-D printed a toy turtle with a texture engineered to make Google's object detection AI classify it as a rifle regardless of the angle from which the turtle was viewed. Creating the turtle required only low-cost commercially available 3-D printing technology. A machine-tweaked image of a dog was shown to look like a cat to both computers and humans. A 2019 study reported that humans can guess how machines will classify adversarial images. Researchers discovered methods for perturbing the appearance of a stop sign such that an autonomous vehicle classified it as a merge or speed limit sign. A data poisoning filter called Nightshade was released in 2023 by researchers at the University of Chicago. It was created for use by visual artists to put on their artwork to corrupt the data set of text-to-image models, which usually scrape their data from the internet without the consent of the image creator. McAfee attacked Tesla's former Mobileye system, fooling it into driving 50 mph over the speed limit, simply by adding a two-inch strip of black tape to a speed limit sign. Adversarial patterns on glasses or clothing designed to deceive facial-recognition systems or license-plate readers, have led to a niche industry of "stealth streetwear". An adversarial attack on a neural network can allow an attacker to inject algorithms into the target system. Researchers can also create adversarial audio inputs to disguise commands to intelligent assistants in benign-seeming audio; a parallel literature explores human perception of such stimuli. Clustering algorithms are used in security applications. Malware and computer virus analysis aims to identify malware families, and to generate specific detection signatures. In the context of malware detection, researchers have proposed methods for adversarial malware generation that automatically craft binaries to evade learning-based detectors while preserving malicious functionality. Optimization-based attacks such as GAMMA use genetic algorithms to inject benign content (for example, padding or new PE sections) into Windows executables, framing evasion as a constrained optimization problem that balances misclassification success with the size of the injected payload and showing transferability to commercial antivirus products. Complementary work uses generative adversarial networks (GANs) to learn feature-space perturbations that cause malware to be classified as benign; Mal-LSGAN, for instance, replaces the standard GAN loss with a least-squares objective and modified activation functions to improve training stability and produce adversarial malware examples that substantially reduce true positive rates across multiple detectors. == Challenges in applying machine learning to security == Researchers have observed that the constraints under which machine-learning techniques function in the security domain are different from those of common benchmark domains. Security data may change over time, include mislabeled samples, or reflect adversarial behavior, which complicates evaluation and reproducibility. === Data collection issues === Security datasets vary across formats, including binaries, network traces, and log files. Studies have reported that the process of converting these sources into features can introduce bias or inconsistencies. In addition, time-based leakage can occur when related malware samples are not properly separated across training and testing splits, which may lead to overly optimistic results. === Labeling and ground truth challenges === Malware labels are often unstable because different antivirus engines may classify the same sample in conflicting ways. Ceschin et al. note that families may be renamed or reorganized over time, causing further discrepancies in ground truth and reducing the reliability of benchmarks. === Concept drift === Because malware creators continuously adapt their techniques, the statistical properties of malicious samples also change. This form of concept drift has been widely documented and may reduce model performance unless systems are updated regularly or incorporate mechanisms for incremental learning. === Feature robustness === Researchers differentiate between features that can be easily manipulated and those that are more resistant to modification. For example, simple static attributes, such as header fields, may be altered by attackers, while structural features, such as control-flow graphs, are generally more stable but computationally expensive to extract. === Class imbalance === In realistic deployment environments, the proportion of malicious samples can be extremely low, ranging from 0.01% to 2% of total data. This unbalanced distribution causes models to develop a bias towards the majority class, achieving high accuracy but failing to identify malicious samples. Prior approaches to this problem have included both data-level solutions and sequence-specific models. Methods like n-gram and Long Short-Term Memory (LSTM) networks can model sequential data, but their performance has been shown to decline significantly when malware samples are realistically proportioned in the training set, demonstrating the limitations in

  Read more →
• 

  AI Background Removers: Free vs Paid (2026)

  Looking for the best AI background remover? An AI background remover is software that uses machine learning to help you get more done — it can save you hours every week by automating repetitive work. Most options offer a generous free tier, with paid plans unlocking higher limits, faster processing, and team features. Whether you are a beginner or a pro, the right AI background remover slots into your workflow and pays for itself fast. Read on for hands-on impressions, pricing tiers, and the standout features that matter.

  Read more →
• 

  Best AI Paraphrasing Tools in 2026

  Curious about the best AI paraphrasing tool? An AI paraphrasing tool is software that uses machine learning to help you get more done — it combines speed, accuracy, and an interface that just works. Hands-on testing shows real-world results vary, so a short free trial is the smartest way to decide. Whether you are a beginner or a pro, the right AI paraphrasing tool slots into your workflow and pays for itself fast. Read on for hands-on impressions, pricing tiers, and the standout features that matter.

  Read more →