AI Generator Video Free Online

AI Generator Video Free Online — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Image fusion

The image fusion process is defined as gathering all the important information from multiple images, and their inclusion into fewer images, usually a single one. This single image is more informative and accurate than any single source image, and it consists of all the necessary information. The purpose of image fusion is not only to reduce the amount of data but also to construct images that are more appropriate and understandable for the human and machine perception. In computer vision, multisensor image fusion is the process of combining relevant information from two or more images into a single image. The resulting image will be more informative than any of the input images. In remote sensing applications, the increasing availability of space borne sensors gives a motivation for different image fusion algorithms. Several situations in image processing require high spatial and high spectral resolution in a single image. Most of the available equipment is not capable of providing such data convincingly. Image fusion techniques allow the integration of different information sources. The fused image can have complementary spatial and spectral resolution characteristics. However, the standard image fusion techniques can distort the spectral information of the multispectral data while merging. In satellite imaging, two types of images are available. The panchromatic image acquired by satellites is transmitted with the maximum resolution available and the multispectral data are transmitted with coarser resolution. This will usually be two or four times lower. At the receiver station, the panchromatic image is merged with the multispectral data to convey more information. Many methods exist to perform image fusion. The very basic one is the high-pass filtering technique. Later techniques are based on Discrete Wavelet Transform, uniform rational filter bank, and Laplacian pyramid. == Motivation == Multi sensor data fusion has become a discipline which demands more general formal solutions to a number of application cases. Several situations in image processing require both high spatial and high spectral information in a single image. This is important in remote sensing. However, the instruments are not capable of providing such information either by design or because of observational constraints. One possible solution for this is data fusion. == Methods == Image fusion methods can be broadly classified into two groups – spatial domain fusion and transform domain fusion. The fusion methods such as averaging, Brovey method, principal component analysis (PCA) and IHS based methods fall under spatial domain approaches. Another important spatial domain fusion method is the high-pass filtering based technique. Here the high frequency details are injected into upsampled version of MS images. The disadvantage of spatial domain approaches is that they produce spatial distortion in the fused image. Spectral distortion becomes a negative factor while we go for further processing, such as classification problem. Spatial distortion can be very well handled by frequency-domain approaches on image fusion. The multiresolution analysis has become a very useful tool for analysing remote sensing images. The discrete wavelet transform has become a very useful tool for fusion. Some other fusion methods are also there, such as Laplacian pyramid based, curvelet transform based etc. These methods show a better performance in spatial and spectral quality of the fused image compared to other spatial methods of fusion. The images used in image fusion should already be registered. Misregistration is a major source of error in image fusion. Some well-known image fusion methods are: High-pass filtering technique IHS transform based image fusion PCA-based image fusion Wavelet transform image fusion Pair-wise spatial frequency matching Comparative analysis of image fusion methods demonstrates that different metrics support different user needs, sensitive to different image fusion methods, and need to be tailored to the application. Categories of image fusion metrics are based on information theory features, structural similarity, or human perception. === Multi-focus image fusion === Multi-focus image fusion is used to collect useful and necessary information from input images with different focus depths in order to create an output image that ideally has all information from input images. In visual sensor network (VSN), sensors are cameras which record images and video sequences. In many applications of VSN, a camera can’t give a perfect illustration including all details of the scene. This is because of the limited depth of focus exists in the optical lens of cameras. Therefore, just the object located in the focal length of camera is focused and cleared and the other parts of image are blurred. VSN has an ability to capture images with different depth of focuses in the scene using several cameras. Due to the large amount of data generated by camera compared to other sensors such as pressure and temperature sensors and some limitation such as limited band width, energy consumption and processing time, it is essential to process the local input images to decrease the amount of transmission data. The aforementioned reasons emphasize the necessary of multi-focus images fusion. Multi-focus image fusion is a process which combines the input multi-focus images into a single image including all important information of the input images and it’s more accurate explanation of the scene than every single input image. == Applications == === In remote sensing === Image fusion in remote sensing has several application domains. An important domain is the multi-resolution image fusion (commonly referred to pan-sharpening). In satellite imagery we can have two types of images: Panchromatic images – An image collected in the broad visual wavelength range but rendered in black and white. Multispectral images – Images optically acquired in more than one spectral or wavelength interval. Each individual image is usually of the same physical area and scale but of a different spectral band. The SPOT PAN satellite provides high resolution (10m pixel) panchromatic data. While the LANDSAT TM satellite provides low resolution (30m pixel) multispectral images. Image fusion attempts to merge these images and produce a single high resolution multispectral image. The standard merging methods of image fusion are based on Red–Green–Blue (RGB) to Intensity–Hue–Saturation (IHS) transformation. The usual steps involved in satellite image fusion are as follows: Resize the low resolution multispectral images to the same size as the panchromatic image. Transform the R, G and B bands of the multispectral image into IHS components. Modify the panchromatic image with respect to the multispectral image. This is usually performed by histogram matching of the panchromatic image with Intensity component of the multispectral images as reference. Replace the intensity component by the panchromatic image and perform inverse transformation to obtain a high resolution multispectral image. Pan-sharpening can be done with Photoshop. Other applications of image fusion in remote sensing are available. === In medical imaging === Image fusion has become a common term used within medical diagnostics and treatment. The term is used when multiple images of a patient are registered and overlaid or merged to provide additional information. Fused images may be created from multiple images from the same imaging modality, or by combining information from multiple modalities, such as magnetic resonance image (MRI), computed tomography (CT), positron emission tomography (PET), and single-photon emission computed tomography (SPECT). In radiology and radiation oncology, these images serve different purposes. For example, CT images are used more often to ascertain differences in tissue density while MRI images are typically used to diagnose brain tumors. For accurate diagnosis, radiologists must integrate information from multiple image formats. Fused, anatomically consistent images are especially beneficial in diagnosing and treating cancer. With the advent of these new technologies, radiation oncologists can take full advantage of intensity modulated radiation therapy (IMRT). Being able to overlay diagnostic images into radiation planning images results in more accurate IMRT target tumor volumes.
Read more →
Sayre's paradox

Sayre's paradox is a dilemma encountered in the design of automated handwriting recognition systems. A standard statement of the paradox is that a cursively written word cannot be recognized without being segmented and cannot be segmented without being recognized. The paradox was first articulated in a 1973 publication by Kenneth M. Sayre, after whom it was named. == Nature of the problem == It is relatively easy to design automated systems capable of recognizing words inscribed in a printed format. Such words are segmented into letters by the very act of writing them on the page. Given templates matching typical letter shapes in a given language, individual letters can be identified with a high degree of probability. In cases of ambiguity, probable letter sequences can be compared with a selection of properly spelled words in that language (called a lexicon). If necessary, syntactic features of the language can be applied to render a generally accurate identification of the words in question. Printed-character recognition systems of this sort are commonly used in processing standardized government forms, in sorting mail by zip code, and so forth. In cursive writing, however, letters comprising a given word typically flow sequentially without gaps between them. Unlike a sequence of printed letters, cursively connected letters are not segmented in advance. Here is where Sayre's Paradox comes into play. Unless the word is already segmented into letters, template-matching techniques like those described above cannot be applied. That is, segmentation is a prerequisite for word recognition. But there are no reliable techniques for segmenting a word into letters unless the word itself has been identified. Word recognition requires letter segmentation, and letter segmentation requires word recognition. There is no way a cursive writing recognition system employing standard template-matching techniques can do both simultaneously. Advantages to be gained by use of automated cursive writing recognition systems include routing mail with handwritten addresses, reading handwritten bank checks, and automated digitalization of hand-written documents. These are practical incentives for finding ways of circumventing Sayre's Paradox. == Avoiding the paradox == One way of ameliorating the adverse effects of the paradox is to normalize the word inscriptions to be recognized. Normalization amounts to eliminating idiosyncrasies in the penmanship of the writer, such as unusual slope of the letters and unusual slant of the cursive line. This procedure can increase the probability of a correct match with a letter template, resulting in an incremental improvement in the success rate of the system. Since improvement of this sort still depends on accurate segmentation, however, it remains subject to the limitations of Sayre's Paradox. Researchers have come to realize that the only way to circumvent the paradox is by use of procedures that do not rely on accurate segmentation. == Directions of current research == Segmentation is accurate to the extent that it matches distinctions among letters in the actual inscriptions presented to the system for recognition (the input data). This is sometimes referred to as “explicit segmentation”. “Implicit segmentation,” by contrast, is division of the cursive line into more parts than the number of actual letters in the cursive line itself. Processing these “implicit parts” to achieve eventual word identification requires specific statistical procedures involving hidden Markov models (HMM). A Markov model is a statistical representation of a random process, which is to say a process in which future states are independent of states occurring before the present. In such a process, a given state is dependent only on the conditional probability of its following the state immediately before it. An example is a series of outcomes from successive casts of a die. An HMM is a Markov model, individual states of which are not fully known. Conditional probabilities between states are still determinate, but the identities of individual states are not fully disclosed. Recognition proceeds by matching HMMs of words to be recognized with previously prepared HMMs of words in the lexicon. The best match in a given case is taken to indicate the identity of the handwritten word in question. As with systems based on explicit segmentation, automated recognition systems based on implicit segmentation are judged more or less successful according to the percentage of correct identifications they accomplish. Instead of explicit segmentation techniques, most automated handwriting recognition systems today employ implicit segmentation in conjunction with HMM-based matching procedures. The constraints epitomized by Sayre's Paradox are largely responsible for this shift in approach.
Read more →
Cloem

Cloem is a company based in Cannes, France, which applies natural language processing (NLP) technologies to assist patent applicants in creating variants of patent claims, called "cloems". According to the company, these "computer-generated claims can be published to keep potential competitors from attempting to file adjacent patent claims." == Technology == According to Cloem, dictionaries, ontologies and proprietary claim-drafting algorithms are used to draft alternative claims based on a client's original set of claims. In particular, the original set of claims is subject to various permutations and linguistic manipulations "by considering alternative definitions for terms as well as “synonyms, hyponyms, hyperonyms, meronyms, holonyms, and antonyms.”" == Possible uses == Cloem can optionally publish one or more created texts, as electronic publications or as paper-printed publications. These can potentially serve – through a defensive publication – as prior art to prevent another party for obtaining a patent on the subject-matter at stake. In other words, after an initial patent filing, an "improvement" patent (adjacent invention) can be applied for by another party, such as a competitor. By publishing variants of a patent claim, the risk of adverse patenting may potentially be decreased (improvement inventions may no longer be patentable). Cloems may also be potentially patentable. One of the issues of patentability, however, is that only a natural person can be a listed as an inventor on a patent. Since cloems are produced by a computer based on a person's input, it is not clear if the computer or the person is the inventor. The inventorship of Cloem texts is an open question.
Read more →
Eyes of Things

Eyes of Things (EoT) is the name of a project funded by the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement number 643924. The purpose of the project, which is funded under the Smart Cyber-physical systems topic, is to develop a generic hardware-software platform for embedded, efficient (i.e. battery-operated, wearable, mobile), computer vision, including deep learning inference. On November 29, 2018, the European Space Agency announced that it was testing the suitability of the device for space applications in advance of a flight in a Cubesat. == Motivation == EoT is based on the following tenets: Future embedded systems will have more intelligence and cognitive functionality. Vision is paramount to such intelligent capacity Unlike other sensors, vision requires intensive processing. Power consumption must be optimized if vision is to be used in mobile and wearable applications Cloud processing of edge-captured images is not sustainable. The sheer amount of visual data generated cannot be transferred to the cloud. Bandwidth is not sufficient and cloud servers cannot cope with it. == Partners == VISILAB group at University of Castilla–La Mancha (Coordinator) Movidius Awaiba Thales Security Solutions & Systems DFKI Fluxguide Evercam nVISO == Awards == 2019 Electronic Component and Systems Innovation Award by the European Commission 2018 HiPEAC Tech Transfer Award 2018 EC Innovation Radar - highlighting excellent innovations Award 2018 Internet of Things (IoT) Technology Research Award Pilot by Google 2016 Semifinalist "THE VISION SHOW STARTUP COMPETITION", Global Association for Vision Information, Boston US
Read more →
Schema-agnostic databases

Schema-agnostic databases or vocabulary-independent databases aim at supporting users to be abstracted from the representation of the data, supporting the automatic semantic matching between queries and databases. Schema-agnosticism is the property of a database of mapping a query issued with the user terminology and structure, automatically mapping it to the dataset vocabulary. The increase in the size and in the semantic heterogeneity of database schemas bring new requirements for users querying and searching structured data. At this scale it can become unfeasible for data consumers to be familiar with the representation of the data in order to query it. At the center of this discussion is the semantic gap between users and databases, which becomes more central as the scale and complexity of the data grows. == Description == The evolution of data environments towards the consumption of data from multiple data sources and the growth in the schema size, complexity, dynamicity and decentralisation (SCoDD) of schemas increases the complexity of contemporary data management. The SCoDD trend emerges as a central data management concern in Big Data scenarios, where users and applications have a demand for more complete data, produced by independent data sources, under different semantic assumptions and contexts of use, which is the typical scenario for Semantic Web Data applications. The evolution of databases in the direction of heterogeneous data environments strongly impacts the usability, semiotics and semantic assumptions behind existing data accessibility methods such as structured queries, keyword-based search and visual query systems. With schema-less databases containing potentially millions of dynamically changing attributes, it becomes unfeasible for some users to become aware of the 'schema' or vocabulary in order to query the database. At this scale, the effort in understanding the schema in order to build a structured query can become prohibitive. == Schema-agnostic queries == Schema-agnostic queries can be defined as query approaches over structured databases which allow users satisfying complex information needs without the understanding of the representation (schema) of the database. Similarly, Tran et al. defines it as "search approaches, which do not require users to know the schema underlying the data". Approaches such as keyword-based search over databases allow users to query databases without employing structured queries. However, as discussed by Tran et al.: "From these points, users however have to do further navigation and exploration to address complex information needs. Unlike keyword search used on the Web, which focuses on simple needs, the keyword search elaborated here is used to obtain more complex results. Instead of a single set of resources, the goal is to compute complex sets of resources and their relations." The development of approaches to support natural language interfaces (NLI) over databases have aimed towards the goal of schema-agnostic queries. Complementarily, some approaches based on keyword search have targeted keyword-based queries which express more complex information needs. Other approaches have explored the construction of structured queries over databases where schema constraints can be relaxed. All these approaches (natural language, keyword-based search and structured queries) have targeted different degrees of sophistication in addressing the problem of supporting a flexible semantic matching between queries and data, which vary from the completely absence of the semantic concern to more principled semantic models. While the demand for schema-agnosticism has been an implicit requirement across semantic search and natural language query systems over structured data, it is not sufficiently individuated as a concept and as a necessary requirement for contemporary database management systems. Recent works have started to define and model the semantic aspects involved on schema-agnostic queries. === Schema-agnostic structured queries === Consist of schema-agnostic queries following the syntax of a structured standard (for example SQL, SPARQL). The syntax and semantics of operators are maintained, while different terminologies are used. ==== Example 1 ==== SELECT ?y { BillClinton hasDaughter ?x . ?x marriedTo ?y . } which maps to the following SPARQL query in the dataset vocabulary: ==== Example 2 ==== which maps to the following SPARQL query in the dataset vocabulary: === Schema-agnostic keyword queries === Consist of schema-agnostic queries using keyword queries. In this case the syntax and semantics of operators are different from the structured query syntax. ==== Example ==== "Bill Clinton daughter married to" "Books by William Goldman with more than 300 pages" == Semantic complexity == As of 2016 the concept of schema-agnostic queries has been developed primarily in academia. Most of schema-agnostic query systems have been investigated in the context of Natural Language Interfaces over databases or over the Semantic Web. These works explore the application of semantic parsing techniques over large, heterogeneous and schema-less databases. More recently, the individuation of the concept of schema-agnostic query systems and databases have appeared more explicitly within the literature. Freitas et al. provide a probabilistic model on the semantic complexity of mapping schema-agnostic queries.
Read more →
EXAPT

EXAPT (a portmanteau of "Extended Subset of APT") is a production-oriented programming language that allows users to generate NC programs with control information for machining tools and facilitates decision-making for production-related issues that may arise during various machining processes. EXAPT was first developed to address industrial requirements. Through the years, the company created additional software for the manufacturing industry. Today, EXAPT offers a suite of SAAS products and services for the manufacturing industry. The trade name, EXAPT, is most commonly associated with the CAD/CAM-System, production data, and tool management software of the German company EXAPT Systemtechnik GmbH based in Aachen, DE. == General == EXAPT is a modularly built programming system for all NC machining operations as Drilling Turning Milling Turn-Milling Nibbling Flame-, laser-, plasma- and water jet cutting Wire eroding Operations with industrial robots Due to the modular structure, the main product groups, EXAPTcam and EXAPTpdo, are gradually expandable and permit individual software for the manufacturing industry used individually and also in a compound with an existing IT environment. == Functionality == EXAPTcam meets the requirements for NC planning, especially for the cutting operations such as turning, drilling, and milling up to 5-axis simultaneous machining. Thereby new process technologies, tool, and machine concepts are constantly involved. In the NC programming data from different sources such as 3D CAD models, drawings or tables can flow in. The possibilities of NC programming reaches from language-oriented to feature-oriented NC programming. The integrated EXAPT knowledge database and intelligent and scalable automatisms support the user. The EXAPT NC planning also covers the generation of production information as clamping and tool plans, presetting data or time calculations. The realistic simulation possibilities of NC planning and NC control data provide with production reliability. EXAPTpdo (EXAPT ProductionsDataOrganization) provides a neutrally applicable technology platform for the information compound of the NC planning - to the shop floor. This applies to all NC production data that are necessary for the set-up of NC machines, for the provision, presetting, and stocking of manufacturing resources and provided by EXAPTpdo in a central database. Besides classical functions of the tool management system (TMS) as the management of cutting tools, measuring, testing and clamping devices the technology data management and tool lifecycle management (TLM) is also included. System-supported "where-used lists" helps to handle the manufacturing resource cycle by secured requirement determination and requirement fulfillment. Unnecessary transports and unplanned dispositive adjustments are dropped, stocks are reduced, set-up times reduced and the throughput is increased. EXAPTpdo synchronizes involved systems within the value chain. Stock systems, MES systems or ERP systems (e.g. from the purchasing or production areas) do not work in isolation from each other but they interact with each other. EXAPTpdo provides the base to Smart Factory, for more flexibility in production and faster communication. == History == With the foundation of the EXAPT-Verein in 1967 as spin-off of the universities Aachen, Berlin and Stuttgart the further development "EXAPT (EXtended Subset of APT)" of the programming language "APT (Automatically Programmed Tool)" was focused and so the first milestone for the EXAPT history was set. In the same year the system EXAPT 1 for drilling and simple milling tasks became available. 1969 The industrial application of EXAPT 2 for the programming of NC machines with 2-axis linear and path control begins. In the following year, the development of the EXAPT modular system starts. 1972 BASIC-EXAPT is provided for the universal, homogeneous programming of all NC tasks. The support is made by the EXAPT applications consultancy. 1973 EXAPT 1.1 is provided for the programming of straight-cut and continuous-path controlled drilling and milling machines and machining centers. At the Hanover Fair (IHA 73) the interactive access to a mainframe via a time-sharing terminal for the part program entry and correction is presented and starts the replacement of the punch card. 1974 The possibilities for the use of process computers for the NC data transfer are leveled out. EXAPT offers the possibility of the result simulation when using plotters with display of tool paths and tools in assignment to the workpiece. In April 1975, the EXAPT NC Systemtechnik GmbH was founded with the aim, of enabling entry into the NC technique for small and medium-sized companies by a complete product and service program. In the following year, the system portfolio is extended with further system modules and service programs and the provision of postprocessors. 1978 The development activities on the EXAPT module system started in 1970 are completed. Using modern software techniques, the different system parts BASIC-EXAPT, EXAPT 1, EXAPT 1.1, and EXAPT 2 are composed of a total system. System support and applications consultancy become a new working focus. From the beginning to the middle of the 1980s Beside new portable software modules for CAD/CAM applications (e. g. CAPEX, NESTEX, CADEX, CADCPL), the first version of the EXAPT DNC system and extensions of the EXAPT NC programming system for the machining of sculptured surfaces are presented. 1988 EXAPT expands the software product range by systems for tool data management (BMO) and production data management (FDO). EXAPT trains more than 1,300 course participants including company-specific courses. 1992 The first version of the completely new product generation EXAPTplus is presented and the agency in Dresden is opened. 1993 The company name "EXAPT NC Systemtechnik GmbH" is changed to "EXAPT Systemtechnik GmbH." EXAPTplus is presented on PC under Windows NT at the EMO '93. The decentralization of the use of EXAPT systems expands the range of applications. In the following year, EXAPT-DNC is executable under Windows on a customary PC. Special hardware is not needed and so it can be used in compound with the database-supported EXAPT production data management system (FDO). 1995 EXAPTplus is also ready for complex application cases such as machining of tubes at extrusion tools. EXAPT-CADI provides the transfer of 2D CAD data to EXAPTplus. With the new office Gießen the marketing is strengthened. In the following year the EXAPT NC editor is developed for the direct processing of NC control data with tool path display and visualization of the tools. In the course of the market entry of more comfortable 3D CAD systems for the solid modelling of components a detailed evaluation of current systems is made in 1997. It is decided to use SolidWorks as a reference system for the solid-oriented NC planning with EXAPT. 1998 The first solution for the transfer of geometry data between SolidWorks and EXAPTplus is generated. The EXAPT organization systems are (beside SQL) also executable under Oracle now. The use of client server solutions supports the data flow in the production. 1999 AFR functions are provided in connection with EXAPTsolid to support a workpiece modelling for NC. The millennium capability is ensured for all EXAPT systems. AFR is a ground-breaking for the integration of third-party products. 2002 EXAPT-BMG is developed for the generation and visualization of tools with additional functions for the assembly from components. The acquisition of tools with their geometric and technological presentation offers extensive support of the NC planning with EXAPT systems. 2003 EXAPTpdo is available to optimize the process chains in production planning and production execution optimally regarding the increasing requirements of changing production conditions. 2004 Diverse system extensions are made in EXAPTplus, EXAPTsolid, EXAPT NC editor, EXAPTpdo for the complete machining on turning/milling centres with result reliability because of more extensive simulation based on realNC (Tecnomatix), for the use of new complex tool systems and the compound use between ERP systems as SAP and intelligent CNC systems. In the following year, EXAPTpdo is extended for the cross-order set-up optimization and provision of manufacturing re-sources especially for single and small series production with connection to purchase and physical portfolio management. 2006 The EXAPT systems are available for extended use as an information platform for production, the time management, and similar requirements. EXAPTsolid is extended for the feature-oriented milling operation and machine simulation. The NC programming of complex machine tools, e.g. three-turret-turning/milling centers is supported by EXAPT systems, as well as the use of multi-functional tools. 2007 A module for 3-5-axis simultaneous milling machining is presented.
Read more →
Convolutional layer

In artificial neural networks, a convolutional layer is a type of network layer that applies a convolution operation to the input. Convolutional layers are some of the primary building blocks of convolutional neural networks (CNNs), a class of neural network most commonly applied to images, video, audio, and other data that have the property of uniform translational symmetry. The convolution operation in a convolutional layer involves sliding a small window (called a kernel or filter) across the input data and computing the dot product between the values in the kernel and the input at each position. This process creates a feature map that represents detected features in the input. == Concepts == === Kernel === Kernels, also known as filters, are small matrices of weights that are learned during the training process. Each kernel is responsible for detecting a specific feature in the input data. The size of the kernel is a hyperparameter that affects the network's behavior. === Convolution === For a 2D input x {\displaystyle x} and a 2D kernel w {\displaystyle w} , the 2D convolution operation can be expressed as: y [ i , j ] = ∑ m = 0 k h − 1 ∑ n = 0 k w − 1 x [ i + m , j + n ] ⋅ w [ m , n ] {\displaystyle y[i,j]=\sum _{m=0}^{k_{h}-1}\sum _{n=0}^{k_{w}-1}x[i+m,j+n]\cdot w[m,n]} where k h {\displaystyle k_{h}} and k w {\displaystyle k_{w}} are the height and width of the kernel, respectively. This generalizes immediately to nD convolutions. Commonly used convolutions are 1D (for audio and text), 2D (for images), and 3D (for spatial objects, and videos). === Stride === Stride determines how the kernel moves across the input data. A stride of 1 means the kernel shifts by one pixel at a time, while a larger stride (e.g., 2 or 3) results in less overlap between convolutions and produces smaller output feature maps. === Padding === Padding involves adding extra pixels around the edges of the input data. It serves two main purposes: Preserving spatial dimensions: Without padding, each convolution reduces the size of the feature map. Handling border pixels: Padding ensures that border pixels are given equal importance in the convolution process. Common padding strategies include: No padding/valid padding. This strategy typically causes the output to shrink. Same padding: Any method that ensures the output size same as input size is a same padding strategy. Full padding: Any method that ensures each input entry is convolved over for the same number of times is a full padding strategy. Common padding algorithms include: Zero padding: Add zero entries to the borders of input. Mirror/reflect/symmetric padding: Reflect the input array on the border. Circular padding: Cycle the input array back to the opposite border, like a torus. The exact numbers used in convolutions is complicated, for which we refer to (Dumoulin and Visin, 2018) for details. == Variants == === Standard === The basic form of convolution as described above, where each kernel is applied to the entire input volume. === Depthwise separable === Depthwise separable convolution separates the standard convolution into two steps: depthwise convolution and pointwise convolution. The depthwise separable convolution decomposes a single standard convolution into two convolutions: a depthwise convolution that filters each input channel independently and a pointwise convolution ( 1 × 1 {\displaystyle 1\times 1} convolution) that combines the outputs of the depthwise convolution. This factorization significantly reduces computational cost. It was first developed by Laurent Sifre during an internship at Google Brain in 2013 as an architectural variation on AlexNet to improve convergence speed and model size. === Dilated === Dilated convolution, or atrous convolution, introduces gaps between kernel elements, allowing the network to capture a larger receptive field without increasing the kernel size. === Transposed === Transposed convolution, also known as deconvolution, fractionally strided convolution, and upsampling convolution, is a convolution where the output tensor is larger than its input tensor. It's often used in encoder-decoder architectures for upsampling. It's used in image generation, semantic segmentation, and super-resolution tasks. == History == The concept of convolution in neural networks was inspired by the visual cortex in biological brains. Early work by Hubel and Wiesel in the 1960s on the cat's visual system laid the groundwork for artificial convolution networks. An early convolution neural network was developed by Kunihiko Fukushima in 1969. It had mostly hand-designed kernels inspired by convolutions in mammalian vision. In 1979 he improved it to the Neocognitron, which learns all convolutional kernels by unsupervised learning (in his terminology, "self-organized by 'learning without a teacher'"). During the 1988 to 1998 period, a series of CNN were introduced by Yann LeCun et al., ending with LeNet-5 in 1998. It was an early influential CNN architecture for handwritten digit recognition, trained on the MNIST dataset, and was used in ATM. (Olshausen & Field, 1996) discovered that simple cells in the mammalian primary visual cortex implement localized, oriented, bandpass receptive fields, which could be recreated by fitting sparse linear codes for natural scenes. This was later found to also occur in the lowest-level kernels of trained CNNs. The field saw a resurgence in the 2010s with the development of deeper architectures and the availability of large datasets and powerful GPUs. AlexNet, developed by Alex Krizhevsky et al. in 2012, was a catalytic event in modern deep learning. In that year’s ImageNet competition, the AlexNet model achieved a 16% top-five error rate, significantly outperforming the next best entry, which had a 26% error rate. The network used eight trainable layers, approximately 650,000 neurons, and around 60 million parameters, highlighting the impact of deeper architectures and GPU acceleration on image recognition performance. From the 2013 ImageNet competition, most entries adopted deep convolutional neural networks, building on the success of AlexNet. Over the following years, performance steadily improved, with the top-five error rate falling from 16% in 2012 and 12% in 2013 to below 3% by 2017, as networks grew increasingly deep.
Read more →
Cuboid (computer vision)

In computer vision, the term cuboid is used to describe a small spatiotemporal volume extracted for purposes of behavior recognition. The cuboid is regarded as a basic geometric primitive type and is used to depict three-dimensional objects within a three dimensional representation of a flat, two dimensional image. == Production == Cuboids can be produced from both two-dimensional and three-dimensional images. One method used to produce cuboids utilizes scene understanding (SUN) primitive databases, which are collections of pictures that already contain cuboids. By sorting through SUN primitive databases with machine learning tools, computers observe the conditions in which cuboids are produced in images from SUN primitive databases and can learn to produce cuboids from other images. RGB-D images, which are RGB images that also record the depth of each pixel, are occasionally used to produce cuboids because computers no longer need to determine the depth of an object, as they typically do because depth is already recorded. Cuboid production is sensitive to changes in color and illumination, blockage, and background clutter. This means that it is difficult for computers to produce cuboids of objects that are multicolored, irregularly illuminated, or partially covered, or if there are many objects in the background. This is partially due to the fact that algorithms for producing cuboids are still relatively simple. == Usage == Cuboids are created for point cloud-based three-dimensional maps and can be utilized in various situations such as augmented reality, the automated control of cars, drones, and robots, and object detection. Cuboids allow for software to identify a scene through geometric descriptions in an “object-agnostic” fashion. Interest points, locations within images that are identified by a computer as essential to identifying the image, created from two-dimensional images can be used with cuboids for image matching, identifying a room or scene, and instance recognition. Interest points created from three dimensional images can be used with cuboids to recognize activities. This is possible because interest points aid software to focus on only the most important aspects of the images. RGB-D images and SLAM systems are used together in RGB-D SLAM systems, which are employed by Computer-aided design systems to generate point cloud-based three-dimensional maps. Most industrial multi-axis machining tools use computer-aided manufacturing and subsequently work in cuboid work spaces.
Read more →
Human Race Machine

The Human Race Machine (HRM) is a computerized console composed of four different programs. The Human Race Machine program allows participants to see themselves with the facial characteristics of six different races: Asian, White, African, Middle Eastern, and Indian, mapped onto their own face. The Age Machine allows viewers see an aged version of his or her face. A version of this methodology has been used for over twenty years by the FBI and the National Center for Missing and Exploited Children to help locate kidnap victims and missing children. The Couples Machine combines photographs of two people in different percentages to show the appearance of their child. The Anomaly Machine lets viewers see themselves with facial anomalies. The HRM was created by artist Nancy Burson and David Kramlich; it uses morphing technology. It was shown on Oprah on 2006-02-16.
Read more →
Natural-language user interface

Natural-language user interface (LUI or NLUI) is a type of computer human interface where linguistic phenomena such as verbs, phrases and clauses act as UI controls for creating, selecting and modifying data in software applications. Chatbots are a common implementation of natural-language interfaces, enabling users to interact with software through conversational text or speech. In interface design, natural-language interfaces are sought after for their speed and ease of use, but most suffer the challenges to understanding wide varieties of ambiguous input. Natural-language interfaces are an active area of study in the field of natural-language processing and computational linguistics. An intuitive general natural-language interface is one of the active goals of the Semantic Web. Text interfaces are "natural" to varying degrees. Many formal (un-natural) programming languages incorporate idioms of natural human language. Likewise, a traditional keyword search engine could be described as a "shallow" natural-language user interface. == Overview == A natural-language search engine would in theory find targeted answers to user questions (as opposed to keyword search). For example, when confronted with a question of the form 'which U.S. state has the highest income tax?', conventional search engines ignore the question and instead search on the keywords 'state', 'income' and 'tax'. Natural-language search, on the other hand, attempts to use natural-language processing to understand the nature of the question and then to search and return a subset of the web that contains the answer to the question. If it works, results would have a higher relevance than results from a keyword search engine, due to the question being included. == History == Prototype Nl interfaces had already appeared in the late sixties and early seventies. SHRDLU, a natural-language interface that manipulates blocks in a virtual "blocks world" Lunar, a natural-language interface to a database containing chemical analyses of Apollo 11 Moon rocks by William A. Woods. Chat-80 transformed English questions into Prolog expressions, which were evaluated against the Prolog database. The code of Chat-80 was circulated widely, and formed the basis of several other experimental Nl interfaces. An online demo is available on the LPA website. ELIZA, written at MIT by Joseph Weizenbaum between 1964 and 1966, mimicked a psychotherapist and was operated by processing users' responses to scripts. Using almost no information about human thought or emotion, the DOCTOR script sometimes provided a startlingly human-like interaction. An online demo is available on the LPA website. Janus is also one of the few systems to support temporal questions. Intellect from Trinzic (formed by the merger of AICorp and Aion). BBN's Parlance built on experience from the development of the Rus and Irus systems. IBM Languageaccess Q&A from Symantec. Datatalker from Natural Language Inc. Loqui from BIM Systems. English Wizard from Linguistic Technology Corporation. == Challenges == Natural-language interfaces have in the past led users to anthropomorphize the computer, or at least to attribute more intelligence to machines than is warranted. On the part of the user, this has led to unrealistic expectations of the capabilities of the system. Such expectations will make it difficult to learn the restrictions of the system if users attribute too much capability to it, and will ultimately lead to disappointment when the system fails to perform as expected as was the case in the AI winter of the 1970s and 80s. A 1995 paper titled 'Natural Language Interfaces to Databases – An Introduction', describes some challenges: Modifier attachment The request "List all employees in the company with a driving licence" is ambiguous unless you know that companies can't have driving licences. Conjunction and disjunction "List all applicants who live in California and Arizona" is ambiguous unless you know that a person can't live in two places at once. Anaphora resolution resolve what a user means by 'he', 'she' or 'it', in a self-referential query. Other goals to consider more generally are the speed and efficiency of the interface, in all algorithms these two points are the main point that will determine if some methods are better than others and therefore have greater success in the market. In addition, localisation across multiple language sites requires extra consideration - this is based on differing sentence structure and language syntax variations between most languages. Finally, regarding the methods used, the main problem to be solved is creating a general algorithm that can recognize the entire spectrum of different voices, while disregarding nationality, gender or age. The significant differences between the extracted features - even from speakers who says the same word or phrase - must be successfully overcome. == Uses and applications == The natural-language interface gives rise to technology used for many different applications. Some of the main uses are: Dictation, is the most common use for automated speech recognition (ASR) systems today. This includes medical transcriptions, legal and business dictation, and general word processing. In some cases special vocabularies are used to increase the accuracy of the system. Command and control, ASR systems that are designed to perform functions and actions on the system are defined as command and control systems. Utterances like "Open Netscape" and "Start a new xterm" will do just that. Telephony, some PBX/Voice Mail systems allow callers to speak commands instead of pressing buttons to send specific tones. Wearables, because inputs are limited for wearable devices, speaking is a natural possibility. Medical, disabilities, many people have difficulty typing due to physical limitations such as repetitive strain injuries (RSI), muscular dystrophy, and many others. For example, people with difficulty hearing could use a system connected to their telephone to convert a caller's speech to text. Embedded applications, some new cellular phones include C&C speech recognition that allow utterances such as "call home". This may be a major factor in the future of automatic speech recognition and Linux. Below are named and defined some of the applications that use natural-language recognition, and so have integrated utilities listed above. === Ubiquity === Ubiquity, an add-on for Mozilla Firefox, is a collection of quick and easy natural-language-derived commands that act as mashups of web services, thus allowing users to get information and relate it to current and other webpages. === Wolfram Alpha === Wolfram Alpha is an online service that answers factual queries directly by computing the answer from structured data, rather than providing a list of documents or web pages that might contain the answer as a search engine would. It was announced in March 2009 by Stephen Wolfram, and was released to the public on May 15, 2009. === Siri === Siri is an intelligent personal assistant application integrated with operating system iOS. The application uses natural language processing to answer questions and make recommendations. Siri's marketing claims include that it adapts to a user's individual preferences over time and personalizes results, and performs tasks such as making dinner reservations while trying to catch a cab. === Others === Ask.com – The original idea behind Ask Jeeves (Ask.com) was traditional keyword searching with an ability to get answers to questions posed in everyday, natural language. The current Ask.com still supports this, with added support for math, dictionary, and conversion questions. Braina – Braina is a natural language interface for Windows OS that allows to type or speak English language sentences to perform a certain action or find information. GNOME Do – Allows for quick finding miscellaneous artifacts of GNOME environment (applications, Evolution and Pidgin contacts, Firefox bookmarks, Rhythmbox artists and albums, and so on) and execute the basic actions on them (launch, open, email, chat, play, etc.). hakia – hakia was an Internet search engine. The company invented an alternative new infrastructure to indexing that used SemanticRank algorithm, a solution mix from the disciplines of ontological semantics, fuzzy logic, computational linguistics, and mathematics. hakia closed in 2014. Lexxe – Lexxe was an Internet search engine that used natural-language processing for queries (semantic search). Searches could be made with keywords, phrases, and questions, such as "How old is Wikipedia?" Lexxe closed its search engine services in 2015. Pikimal – Pikimal used natural-language tied to user preference to make search recommendations by template. Pikimal closed in 2015. Powerset – On May 11, 2008, the company unveiled a tool for searching a fixed subset of Wikipedia using conversational phrases rather than keywords. On July 1, 2008, it was purchased by
Read more →
Pose (computer vision)

In the fields of computing and computer vision, pose (or spatial pose) represents the position and the orientation of an object, each usually in three dimensions. Poses are often stored internally as transformation matrices. The term “pose” is largely synonymous with the term “transform”, but a transform may often include scale, whereas pose does not. In computer vision, the pose of an object is often estimated from camera input by the process of pose estimation. This information can then be used, for example, to allow a robot to manipulate an object or to avoid moving into the object based on its perceived position and orientation in the environment. Other applications include skeletal action recognition. == Pose estimation == The specific task of determining the pose of an object in an image (or stereo images, image sequence) is referred to as pose estimation. Pose estimation problems can be solved in different ways depending on the image sensor configuration, and choice of methodology. Three classes of methodologies can be distinguished: Analytic or geometric methods: Given that the image sensor (camera) is calibrated and the mapping from 3D points in the scene and 2D points in the image is known. If also the geometry of the object is known, it means that the projected image of the object on the camera image is a well-known function of the object's pose. Once a set of control points on the object, typically corners or other feature points, has been identified, it is then possible to solve the pose transformation from a set of equations which relate the 3D coordinates of the points with their 2D image coordinates. Algorithms that determine the pose of a point cloud with respect to another point cloud are known as point set registration algorithms, if the correspondences between points are not already known. Genetic algorithm methods: If the pose of an object does not have to be computed in real-time a genetic algorithm may be used. This approach is robust especially when the images are not perfectly calibrated. In this particular case, the pose represent the genetic representation and the error between the projection of the object control points with the image is the fitness function. Learning-based methods: These methods use artificial learning-based system which learn the mapping from 2D image features to pose transformation. In short, this means that a sufficiently large set of images of the object, in different poses, must be presented to the system during a learning phase. Once the learning phase is completed, the system should be able to present an estimate of the object's pose given an image of the object. == Camera pose ==
Read more →
Structured-light 3D scanner

A structured-light 3D scanner is a device used to capture the three-dimensional shape of an object by projecting light patterns, such as grids or stripes, onto its surface. The deformation of these patterns is recorded by cameras and processed using specialized algorithms to generate a detailed 3D model. Structured-light 3D scanning is widely employed in fields such as industrial design, quality control, cultural heritage preservation, augmented reality gaming, and medical imaging. Compared to laser-based 3D scanning, structured-light scanners use non-coherent light sources, such as LEDs or projectors, which enable faster data acquisition and eliminate potential safety concerns associated with lasers. However, the accuracy of structured-light scanning can be influenced by external factors, including ambient lighting conditions and the reflective properties of the scanned object. == Principle == Projecting a narrow band of light onto a three-dimensional surface creates a line of illumination that appears distorted when viewed from perspectives other than that of the projector. This distortion can be analyzed to reconstruct the geometry of the surface, a technique known as light sectioning. Projecting patterns composed of multiple stripes or arbitrary fringes simultaneously enables the acquisition of numerous data points at once, improving scanning speed. While various structured light projection techniques exist, parallel stripe patterns are among the most commonly used. By analyzing the displacement of these stripes, the three-dimensional coordinates of surface details can be accurately determined. === Generation of light patterns === Two major methods of stripe pattern generation have been established: Laser interference and projection. The laser interference method works with two wide planar laser beam fronts. Their interference results in regular, equidistant line patterns. Different pattern sizes can be obtained by changing the angle between these beams. The method allows for the exact and easy generation of very fine patterns with unlimited depth of field. Disadvantages are high cost of implementation, difficulties providing the ideal beam geometry, and laser typical effects like speckle noise and the possible self interference with beam parts reflected from objects. Typically, there is no means of modulating individual stripes, such as with Gray codes. The projection method uses incoherent light and basically works like a video projector. Patterns are usually generated by passing light through a digital spatial light modulator, typically based on one of the three currently most widespread digital projection technologies, transmissive liquid crystal, reflective liquid crystal on silicon (LCOS) or digital light processing (DLP; moving micro mirror) modulators, which have various comparative advantages and disadvantages for this application. Other methods of projection could be and have been used, however. Patterns generated by digital display projectors have small discontinuities due to the pixel boundaries in the displays. Sufficiently small boundaries however can practically be neglected as they are evened out by the slightest defocus. A typical measuring assembly consists of one projector and at least one camera. For many applications, two cameras on opposite sides of the projector have been established as useful. Invisible (or imperceptible) structured light uses structured light without interfering with other computer vision tasks for which the projected pattern will be confusing. Example methods include the use of infrared light or of extremely high framerates alternating between two exact opposite patterns. === Calibration === Geometric distortions by optics and perspective must be compensated by a calibration of the measuring equipment, using special calibration patterns and surfaces. A mathematical model is used for describing the imaging properties of projector and cameras. Essentially based on the simple geometric properties of a pinhole camera, the model also has to take into account the geometric distortions and optical aberration of projector and camera lenses. The parameters of the camera as well as its orientation in space can be determined by a series of calibration measurements, using photogrammetric bundle adjustment. === Analysis of stripe patterns === There are several depth cues contained in the observed stripe patterns. The displacement of any single stripe can directly be converted into 3D coordinates. For this purpose, the individual stripe has to be identified, which can for example be accomplished by tracing or counting stripes (pattern recognition method). Another common method projects alternating stripe patterns, resulting in binary Gray code sequences identifying the number of each individual stripe hitting the object. An important depth cue also results from the varying stripe widths along the object surface. Stripe width is a function of the steepness of a surface part, i.e. the first derivative of the elevation. Stripe frequency and phase deliver similar cues and can be analyzed by a Fourier transform. Finally, the wavelet transform has recently been discussed for the same purpose. In many practical implementations, series of measurements combining pattern recognition, Gray codes and Fourier transform are obtained for a complete and unambiguous reconstruction of shapes. Another method also belonging to the area of fringe projection has been demonstrated, utilizing the depth of field of the camera. It is also possible to use projected patterns primarily as a means of structure insertion into scenes, for an essentially photogrammetric acquisition. === Precision and range === The optical resolution of fringe projection methods depends on the width of the stripes used and their optical quality. It is also limited by the wavelength of light. An extreme reduction of stripe width proves inefficient due to limitations in depth of field, camera resolution and display resolution. Therefore, the phase shift method has been widely established: A number of at least 3, typically about 10 exposures are taken with slightly shifted stripes. The first theoretical deductions of this method relied on stripes with a sine wave shaped intensity modulation, but the methods work with "rectangular" modulated stripes, as delivered from LCD or DLP displays as well. By phase shifting, surface detail of e.g. 1/10 the stripe pitch can be resolved. Current optical stripe pattern profilometry hence allows for detail resolutions down to the wavelength of light, below 1 micrometer in practice or, with larger stripe patterns, to approx. 1/10 of the stripe width. Concerning level accuracy, interpolating over several pixels of the acquired camera image can yield a reliable height resolution and also accuracy, down to 1/50 pixel. Arbitrarily large objects can be measured with accordingly large stripe patterns and setups. Practical applications are documented involving objects several meters in size. Typical accuracy figures are: Planarity of a 2-foot (0.61 m) wide surface, to 10 micrometres (0.00039 in). Shape of a motor combustion chamber to 2 micrometres (7.9×10−5 in) (elevation), yielding a volume accuracy 10 times better than with volumetric dosing. Shape of an object 2 inches (51 mm) large, to about 1 micrometre (3.9×10−5 in) Radius of a blade edge of e.g. 10 micrometres (0.00039 in), to ±0.4 μm === Navigation === As the method can measure shapes from only one perspective at a time, complete 3D shapes have to be combined from different measurements in different angles. This can be accomplished by attaching marker points to the object and combining perspectives afterwards by matching these markers. The process can be automated, by mounting the object on a motorized turntable on robotic inspection cell, or CNC positioning device. Markers can as well be applied on a positioning device instead of the object itself. The 3D data gathered can be used to retrieve CAD (computer aided design) data and models from existing components (reverse engineering), hand formed samples or sculptures, natural objects or artifacts. === Challenges === As with all optical methods, reflective or transparent surfaces raise difficulties. Reflections cause light to be reflected either away from the camera or right into its optics. In both cases, the dynamic range of the camera can be exceeded. Transparent or semi-transparent surfaces also cause major difficulties. In these cases, coating the surfaces with a thin opaque lacquer just for measuring purposes is a common practice. A recent method handles highly reflective and specular objects by inserting a 1-dimensional diffuser between the light source (e.g., projector) and the object to be scanned. Alternative optical techniques have been proposed for handling perfectly transparent and specular objects. Double reflections and inter-reflections can cause the stripe pattern to be overlaid with unwanted ligh
Read more →
Big data

Big data primarily refers to data sets that are too large or complex to be dealt with by traditional data-processing software. Data with many entries (rows) offers greater statistical power, while data with higher complexity (more attributes or columns) may lead to a higher false discovery rate. Big data analysis challenges include capturing data, data storage, data analysis, search, sharing, transfer, visualization, querying, updating, information privacy, and data sources. Big data was originally associated with three key concepts: volume, variety, and velocity. The analysis of big data that have only volume, velocity, and variety can pose challenges in sampling. A fourth concept, veracity, which refers to the level of reliability of data, was thus added. Without sufficient investment in expertise to ensure big data veracity, the volume and variety of data can produce costs and risks that exceed an organization's capacity to create and capture value from big data. Current usage of the term big data tends to refer to the use of predictive analytics, user behavior analytics, or certain other advanced data analytics methods that extract value from big data, and seldom to a particular size of data set. "There is little doubt that the quantities of data now available are indeed large, but that's not the most relevant characteristic of this new data ecosystem." Analysis of data sets can find new correlations to "spot business trends, prevent diseases, combat crime and so on". Scientists, business executives, medical practitioners, advertising and governments alike regularly meet difficulties with large datasets in areas including Internet searches, fintech, healthcare analytics, geographic information systems, urban informatics, and business informatics. Scientists encounter limitations in e-Science work, including meteorology, genomics, connectomics, complex physics simulations, biology, and environmental research. The size and number of available data sets have grown rapidly as data is collected by devices such as mobile devices, cheap and numerous information-sensing Internet of things devices, aerial (remote sensing) equipment, software logs, cameras, microphones, radio-frequency identification (RFID) readers and wireless sensor networks. The world's technological per-capita capacity to store information has roughly doubled every 40 months since the 1980s; as of 2012, every day 2.5 exabytes (2.17×260 bytes) of data are generated. Based on an IDC report prediction, the global data volume was predicted to grow exponentially from 4.4 zettabytes to 44 zettabytes between 2013 and 2020. By 2025, IDC predicts there will be 163 zettabytes of data. According to IDC, global spending on big data and business analytics (BDA) solutions is estimated to reach $215.7 billion in 2021. Statista reported that the global big data market is forecasted to grow to $103 billion by 2027. In 2011 McKinsey & Company reported, if US healthcare were to use big data creatively and effectively to drive efficiency and quality, the sector could create more than $300 billion in value every year. In the developed economies of Europe, government administrators could save more than €100 billion ($149 billion) in operational efficiency improvements alone by using big data. And users of services enabled by personal-location data could capture $600 billion in consumer surplus. One question for large enterprises is determining who should own big-data initiatives that affect the entire organization. Relational database management systems and desktop statistical software packages used to visualize data often have difficulty processing and analyzing big data. The processing and analysis of big data may require "massively parallel software running on tens, hundreds, or even thousands of servers". What qualifies as "big data" varies depending on the capabilities of those analyzing it and their tools. Furthermore, expanding capabilities make big data a moving target. "For some organizations, facing hundreds of gigabytes of data for the first time may trigger a need to reconsider data management options. For others, it may take tens or hundreds of terabytes before data size becomes a significant consideration." == Definition == The term big data has been in use since the 1990s, with some giving credit to John Mashey for popularizing the term. Big data usually includes data sets with sizes beyond the ability of commonly used software tools to capture, curate, manage, and process data within a tolerable elapsed time. Big data philosophy encompasses unstructured, semi-structured and structured data; however, the main focus is on unstructured data. Big data "size" is a constantly moving target; as of 2012 ranging from a few dozen terabytes to many zettabytes of data. Big data requires a set of techniques and technologies with new forms of integration to reveal insights from datasets that are diverse, complex, and of a massive scale. Variability is often included as an additional quality of big data. A 2018 definition states "Big data is where parallel computing tools are needed to handle data", and notes, "This represents a distinct and clearly defined change in the computer science used, via parallel programming theories, and losses of some of the guarantees and capabilities made by Codd's relational model." In a comparative study of big datasets, Kitchin and McArdle found that none of the commonly considered characteristics of big data appear consistently across all of the analyzed cases. For this reason, other studies identified the redefinition of power dynamics in knowledge discovery as the defining trait. Instead of focusing on the intrinsic characteristics of big data, this alternative perspective pushes forward a relational understanding of the object claiming that what matters is the way in which data is collected, stored, made available and analyzed. === Big data vs. business intelligence === The growing maturity of the concept more starkly delineates the difference between "big data" and "business intelligence": Business intelligence uses applied mathematics tools and descriptive statistics with data with high information density to measure things, detect trends, etc. Big data uses mathematical analysis, optimization, inductive statistics, and concepts from nonlinear system identification to infer laws (regressions, nonlinear relationships, and causal effects) from large sets of data with low information density to reveal relationships and dependencies, or to perform predictions of outcomes and behaviors. == Characteristics == Big data can be described by the following characteristics: Volume The quantity of generated and stored data. The size of the data determines the value and potential insight, and whether it can be considered big data or not. The size of big data is usually larger than terabytes and petabytes. Variety The type and nature of the data. Earlier technologies like RDBMSs were capable to handle structured data efficiently and effectively. However, the change in type and nature from structured to semi-structured or unstructured challenged the existing tools and technologies. Big data technologies evolved with the prime intention to capture, store, and process the semi-structured and unstructured (variety) data generated with high speed (velocity), and huge in size (volume). Later, these tools and technologies were explored and used for handling structured data also but preferable for storage. Eventually, the processing of structured data was still kept as optional, either using big data or traditional RDBMSs. This helps in analyzing data towards effective usage of the hidden insights exposed from the data collected via social media, log files, sensors, etc. Big data draws from text, images, audio, video; plus it completes missing pieces through data fusion. Velocity The speed at which the data is generated and processed to meet the demands and challenges that lie in the path of growth and development. Big data is often available in real-time. Compared to small data, big data is produced more continually. Two kinds of velocity related to big data are the frequency of generation and the frequency of handling, recording, and publishing. Veracity The truthfulness or reliability of the data, which refers to the data quality and the data value. Big data must not only be large in size, but also must be reliable in order to achieve value in the analysis of it. The data quality of captured data can vary greatly, affecting an accurate analysis. Value The worth in information that can be achieved by the processing and analysis of large datasets. Value also can be measured by an assessment of the other qualities of big data. Value may also represent the profitability of information that is retrieved from the analysis of big data. Variability The characteristic of the changing formats, structure, or sources of big data. Big data can include structured, unstructured,
Read more →
Region Based Convolutional Neural Networks

Region-based Convolutional Neural Networks (R-CNN) are a family of machine learning models for computer vision, and specifically object detection and localization. The original goal of R-CNN was to take an input image and produce a set of bounding boxes as output, where each bounding box contains an object and also the category (e.g. car or pedestrian) of the object. In general, R-CNN architectures perform selective search over feature maps outputted by a CNN. R-CNN has been extended to perform other computer vision tasks, such as: tracking objects from a drone-mounted camera, locating text in an image, and enabling object detection in Google Lens. Mask R-CNN is also one of seven tasks in the MLPerf Training Benchmark, which is a competition to speed up the training of neural networks. == History == The following covers some of the versions of R-CNN that have been developed. November 2013: R-CNN. April 2015: Fast R-CNN. June 2015: Faster R-CNN. March 2017: Mask R-CNN. December 2017: Cascade R-CNN is trained with increasing Intersection over Union (IoU, also known as the Jaccard index) thresholds, making each stage more selective against nearby false positives. June 2019: Mesh R-CNN adds the ability to generate a 3D mesh from a 2D image. == Architecture == For review articles see. === Selective search === Given an image (or an image-like feature map), selective search (also called Hierarchical Grouping) first segments the image by the algorithm in (Felzenszwalb and Huttenlocher, 2004), then performs the following: Input: (colour) image Output: Set of object location hypotheses L Segment image into initial regions R = {r1, ..., rn} using Felzenszwalb and Huttenlocher (2004) Initialise similarity set S = ∅ foreach Neighbouring region pair (ri, rj) do Calculate similarity s(ri, rj) S = S ∪ s(ri, rj) while S ≠ ∅ do Get highest similarity s(ri, rj) = max(S) Merge corresponding regions rt = ri ∪ rj Remove similarities regarding ri: S = S \ s(ri, r∗) Remove similarities regarding rj: S = S \ s(r∗, rj) Calculate similarity set St between rt and its neighbours S = S ∪ St R = R ∪ rt Extract object location boxes L from all regions in R === R-CNN === With R-CNN, prediction follows a two-step process. A preprocessing selective search step generates a large set of candidate objects (typically as many as 2000), known as regions of interest (ROI). These are forwarded to a CNN, which predicts an object class score and bounding box estimate, independently for each ROI. Importantly, the ROIs are heavily filtered to remove excess candidates. This is achieved using two mechanism. Filtering begins by removing ROIs assigned to the background category. This is a specialized category, which is scored by the CNN alongside other categories. An unfortunate reality is that remaining ROIs typically suffer from heavy duplication. Namely, multiple ROIs that cover same objects in the image are all assigned non-background categories. This is resolved by a heuristic non-maximum suppression (NMS) step. === Fast R-CNN === While the original R-CNN independently computed the neural network features on each of as many as two thousand regions of interest, Fast R-CNN runs the neural network once on the whole image. At the end of the network is a ROIPooling module, which slices out each ROI from the network's output tensor, reshapes it, and classifies it. As in the original R-CNN, the Fast R-CNN uses selective search to generate its region proposals. === Faster R-CNN === While Fast R-CNN used selective search to generate ROIs, Faster R-CNN integrates the ROI generation into the neural network itself. === Mask R-CNN === While previous versions of R-CNN focused on object detections, Mask R-CNN adds instance segmentation. Mask R-CNN also replaced ROIPooling with a new method called ROIAlign, which can represent fractions of a pixel.
Read more →
Luxafor

Luxafor () is a brand of office productivity tools designed to improve efficiency and communication in workplaces. The brands main product is LED status indicators for use in office settings. Luxafor is a product line under the company SIA Greynut, based in Riga, Latvia. == History == Luxafor was developed by the technology company SIA Greynut. The brand first gained attention through a Kickstarter campaign in 2015, which aimed to fund its initial product, the Luxafor Flag. Although the campaign was unsuccessful in reaching its funding goal, the product was still brought to market. In 2017, Luxafor launched another Kickstarter campaign for the Luxafor Bluetooth, a wireless version of its LED status indicator. This campaign also did not meet its funding goal, but like its predecessor, the product was still developed and released. Despite initial setbacks, Luxafor Bluetooth has become one of the brand's leading products. == Products == Luxafors main product range is LED status indicators, including: === Luxafor Flag === A USB-powered LED indicator that shows different colors to signal the user's availability. === Luxafor Bluetooth === A wireless LED indicator controlled via Bluetooth, integrating with productivity tools like Slack and Microsoft Teams. === Luxafor Switch === An advanced status indicator designed to manage room and workspace availability. === Other === Other Luxafor products include CO2 Dongle, Smart Button, Mute Button, Pomodoro Timer and others. == Features == Luxafor products are known for their customizable indicators, integration capabilities with IFTTT, Zapier, and remote control features. They are compatible with various operating systems, including Windows and macOS, and can be integrated with numerous communication and productivity platforms, like Microsoft Teams and Cisco Jabber.
Read more →