AI Generator Video Free Online

AI Generator Video Free Online — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Cloud load balancing

Cloud load balancing is a type of load balancing that is performed in cloud computing. Cloud load balancing is the process of distributing workloads across multiple computing resources. Cloud load balancing reduces costs associated with document management systems and maximizes availability of resources. It is a type of load balancing and not to be confused with Domain Name System (DNS) load balancing. While DNS load balancing uses software or hardware to perform the function, cloud load balancing uses services offered by various computer network companies. == Comparison With DNS load balancing == Cloud load balancing has an advantage over DNS load balancing as it can transfer loads to servers globally as opposed to distributing it across local servers. In the event of a local server outage, cloud load balancing delivers users to the closest regional server without interruption for the user. Cloud load balancing addresses issues relating to TTL reliance present during DNS load balancing. DNS directives can only be enforced once in every TTL cycle and can take several hours if switching between servers during a lag or server failure. Incoming server traffic will continue to route to the original server until the TTL expires and can create an uneven performance as different internet service providers may reach the new server before other internet service providers. Another advantage is that cloud load balancing improves response time by routing remote sessions to the best performing data centers. == Importance of Load Balancing == Cloud computing brings advantages in "cost, flexibility and availability of service users." Those advantages drive the demand for Cloud services. The demand raises technical issues in Service Oriented Architectures and Internet of Services (IoS)-style applications, such as high availability and scalability. As a major concern in these issues, load balancing allows cloud computing to "scale up to increasing demands" by efficiently allocating dynamic local workload evenly across all nodes. == Load Balancing Techniques == === Scheduling Algorithms === Opportunistic Load Balancing (OLB) is the algorithm that assigns workloads to nodes in free order. It is simple but does not consider the expected execution time of each node. Load balance Min-Min (LBMM) assigns sub-tasks to the node which requires minimum execution time. === Load Balancing Policies === Workload and Client Aware Policy (WCAP) specifies the unique and special property (USP) of requests and computing nodes. With the information of USP, the schedule can decide the most suitable node to complete a request. WCAP makes the most of computing nodes by reducing their idle time. Also, it reduces performance time through searches based on content information. === A Comparative Study of Algorithms === Biased Random Sampling bases its job allocation on the network represented by a directed graph. For each execution node in this graph, in-degree means available resources and out-degree means allocated jobs. In-degree will decrease during job execution while out-degree will increase after job allocation. Active Clustering is a self-aggregation algorithm to rewire the network. The experiment result is that"Active Clustering and Random Sampling Walk predictably perform better as the number of processing nodes is increased" while the Honeyhive algorithm does not show the increasing pattern. == Client-side Load Balancer Using Cloud Computing == Load balancer forwards packets to web servers according to different workloads on servers. However, it is hard to implement a scalable load balancer because of both the "cloud's commodity business model and the limited infrastructure control allowed by cloud providers." Client-side Load Balancer (CLB) solve this problem by using a scalable cloud storage service. CLB allows clients to choose back-end web servers for dynamic content although it delivers static content.
Read more →
Vulnerability Discovery Model

A Vulnerability Discovery Model (VDM) uses discovery event data with software reliability models for predicting the same. A thorough presentation of VDM techniques is available in. Numerous model implementations are available in the MCMCBayes open source repository. Several VDM examples include: Alhazmi-Malaiya: Time based model (Alhazmi-Malaiya Logistic (AML) model) Alhazmi-Malaiya: Effort based model Rescorla: Quadratic Model and Exponential Model Anderson: Thermodynamic Model Kim: Weibull Model Linear Model Hump-Shaped Model Independent and Dependent Model Vulnerability Discovery Modeling using Bayesian model averaging Multivariate Vulnerability Discovery Models
Read more →
System Service Descriptor Table

The System Service Descriptor Table (SSDT) is an internal dispatch table within Microsoft Windows. == Function == The SSDT maps syscalls to kernel function addresses. When a syscall is issued by a user space application, it contains the service index as parameter to indicate which syscall is called. The SSDT is then used to resolve the address of the corresponding function within ntoskrnl.exe. In modern Windows kernels, two SSDTs are used: One for generic routines (KeServiceDescriptorTable) and a second (KeServiceDescriptorTableShadow) for graphical routines. A parameter passed by the calling userspace application determines which SSDT shall be used. == Hooking == Modification of the SSDT allows to redirect syscalls to routines outside the kernel. These routines can be either used to hide the presence of software or to act as a backdoor to allow attackers permanent code execution with kernel privileges. For both reasons, hooking SSDT calls is often used as a technique in both Windows kernel mode rootkits and antivirus software. In 2010, many computer security products which relied on hooking SSDT calls were shown to be vulnerable to exploits using race conditions to attack the products' security checks.
Read more →
MyChild App

MyChild App is an Android app that helps parents screen developmental disorders in their children between the age of 1 and 24 months. The app contains information for parents about the different stages of a child's development. == Background == Launched in 2015 on Google PlayStore, the app is a consumer product of the parent company, Time Ahead, Inc. Its office is based in Bhopal, Madhya Pradesh, India. As of August 2016, the app had been downloaded by 11,000+ users in 140+ countries and is a part of fbstart case study. == Funding == In 2015, MyChild App raised a seed round of $100k led by 500 Startups, followed by angel investors Samir Bangara, Anisha Mittal, Pallav Nadhani, Deobrat Singh, Lalit Mangal, Arihant Patni, Amit Gupta, Dr. Ritesh Malik, Saurab Paruthi, and Singapore Angel Network.
Read more →
Kernel (image processing)

In image processing, a kernel, convolution matrix, or mask is a small matrix used for blurring, sharpening, embossing, edge detection, and more. This is accomplished by doing a convolution between the kernel and an image. Or more simply, when each pixel in the output image is a function of the nearby pixels (including itself) in the input image, the kernel is that function. == Details == The general expression of a convolution is g x , y = ω ∗ f x , y = ∑ i = − a a ∑ j = − b b ω i , j f x − i , y − j , {\displaystyle g_{x,y}=\omega f_{x,y}=\sum _{i=-a}^{a}{\sum _{j=-b}^{b}{\omega _{i,j}f_{x-i,y-j}}},} where g ( x , y ) {\displaystyle g(x,y)} is the filtered image, f ( x , y ) {\displaystyle f(x,y)} is the original image, ω {\displaystyle \omega } is the filter kernel. Every element of the filter kernel is considered by − a ≤ i ≤ a {\displaystyle -a\leq i\leq a} and − b ≤ j ≤ b {\displaystyle -b\leq j\leq b} . Depending on the element values, a kernel can cause a wide range of effects: The above are just a few examples of effects achievable by convolving kernels and images. === Origin === The origin is the position of the kernel which is above (conceptually) the current output pixel. This could be outside of the actual kernel, though usually it corresponds to one of the kernel elements. For a symmetric kernel, the origin is usually the center element. == Convolution == Convolution is the process of adding each element of the image to its local neighbors, weighted by the kernel. This is related to a form of mathematical convolution. The matrix operation being performed—convolution—is not traditional matrix multiplication, despite being similarly denoted by . For example, if we have two three-by-three matrices, the first a kernel, and the second an image piece, convolution is the process of flipping both the rows and columns of the kernel and multiplying locally similar entries and summing. The element at coordinates [2, 2] (that is, the central element) of the resulting image would be a weighted combination of all the entries of the image matrix, with weights given by the kernel: ( [ a b c d e f g h i ] ∗ [ 1 2 3 4 5 6 7 8 9 ] ) [ 2 , 2 ] = {\displaystyle \left({\begin{bmatrix}a&b&c\\d&e&f\\g&h&i\end{bmatrix}}{\begin{bmatrix}1&2&3\\4&5&6\\7&8&9\end{bmatrix}}\right)[2,2]=} ( i ⋅ 1 ) + ( h ⋅ 2 ) + ( g ⋅ 3 ) + ( f ⋅ 4 ) + ( e ⋅ 5 ) + ( d ⋅ 6 ) + ( c ⋅ 7 ) + ( b ⋅ 8 ) + ( a ⋅ 9 ) . {\displaystyle (i\cdot 1)+(h\cdot 2)+(g\cdot 3)+(f\cdot 4)+(e\cdot 5)+(d\cdot 6)+(c\cdot 7)+(b\cdot 8)+(a\cdot 9).} The other entries would be similarly weighted, where we position the center of the kernel on each of the boundary points of the image, and compute a weighted sum. The values of a given pixel in the output image are calculated by multiplying each kernel value by the corresponding input image pixel values. This can be described algorithmically with the following pseudo-code: for each image row in input image: for each pixel in image row: set accumulator to zero for each kernel row in kernel: for each element in kernel row: if element position corresponding to pixel position then multiply element value corresponding to pixel value add result to accumulator endif set output image pixel to accumulator corresponding input image pixels are found relative to the kernel's origin. If the kernel is symmetric then place the center (origin) of the kernel on the current pixel. The kernel will overlap the neighboring pixels around the origin. Each kernel element should be multiplied with the pixel value it overlaps with and all of the obtained values should be summed. This resultant sum will be the new value for the current pixel currently overlapped with the center of the kernel. If the kernel is not symmetric, it has to be flipped both around its horizontal and vertical axis before calculating the convolution as above. The general form for matrix convolution is [ x 11 x 12 ⋯ x 1 n x 21 x 22 ⋯ x 2 n ⋮ ⋮ ⋱ ⋮ x m 1 x m 2 ⋯ x m n ] ∗ [ y 11 y 12 ⋯ y 1 n y 21 y 22 ⋯ y 2 n ⋮ ⋮ ⋱ ⋮ y m 1 y m 2 ⋯ y m n ] = ∑ i = 0 m − 1 ∑ j = 0 n − 1 x ( m − i ) ( n − j ) y ( 1 + i ) ( 1 + j ) {\displaystyle {\begin{bmatrix}x_{11}&x_{12}&\cdots &x_{1n}\\x_{21}&x_{22}&\cdots &x_{2n}\\\vdots &\vdots &\ddots &\vdots \\x_{m1}&x_{m2}&\cdots &x_{mn}\\\end{bmatrix}}{\begin{bmatrix}y_{11}&y_{12}&\cdots &y_{1n}\\y_{21}&y_{22}&\cdots &y_{2n}\\\vdots &\vdots &\ddots &\vdots \\y_{m1}&y_{m2}&\cdots &y_{mn}\\\end{bmatrix}}=\sum _{i=0}^{m-1}\sum _{j=0}^{n-1}x_{(m-i)(n-j)}y_{(1+i)(1+j)}} === Edge handling === Kernel convolution usually requires values from pixels outside of the image boundaries. There are a variety of methods for handling image edges. Extend The nearest border pixels are conceptually extended as far as necessary to provide values for the convolution. Corner pixels are extended in 90° wedges. Other edge pixels are extended in lines. Wrap The image is conceptually wrapped (or tiled) and values are taken from the opposite edge or corner. Mirror The image is conceptually mirrored at the edges. For example, attempting to read a pixel 3 units outside an edge reads one 3 units inside the edge instead. Crop / Avoid overlap Any pixel in the output image which would require values from beyond the edge is skipped. This method can result in the output image being slightly smaller, with the edges having been cropped. Move kernel so that values from outside of image is never required. Machine learning mainly uses this approach. Example: Kernel size 10x10, image size 32x32, result image is 23x23. Kernel Crop Any pixel in the kernel that extends past the input image isn't used and the normalizing is adjusted to compensate. Constant Use constant value for pixels outside of image. Usually black or sometimes gray is used. Generally this depends on application. === Normalization === Normalization is defined as the division of each element in the kernel by the sum of all kernel elements, so that the sum of the elements of a normalized kernel is unity. This will ensure the average pixel in the modified image is as bright as the average pixel in the original image. === Optimization === Fast convolution algorithms include: separable convolution ==== Separable convolution ==== 2D convolution with an M × N kernel requires M × N multiplications for each sample (pixel). If the kernel is separable, then the computation can be reduced to M + N multiplications. Using separable convolutions can significantly decrease the computation by doing 1D convolution twice instead of one 2D convolution. === Implementation === Here a concrete convolution implementation done with the GLSL shading language :
Read more →
Terminology model

A terminology model is a refinement of a concept system. Within a terminology model the concepts (object types) of a specific problem or subject area are defined by subject-matter experts in terms of concept (object type) definitions and definitions of subordinated concepts or characteristics (properties). Besides object types, the terminology model allows defining hierarchical classifications, definitions for object type and property behavior and definition of casual relations. The terminology model is a means for subject-matter experts to express their knowledge about the subject in subject-specific terms. Since the terminology model is structured rather similar to an object-oriented database schema, is can be transformed without loss of information into an object-oriented database schema. Thus, the terminology model is a method for problem analysis on the one side and a mean of defining database schema on the other side. Several terminology models have been developed and published in the field of statistics: Terminology model for classifications Terminology model for statistical variables Reference model for statistical metadata
Read more →
Digital video effect

Digital video effects (DVEs) are visual effects that provide comprehensive live video image manipulation, in the same form as optical printer effects in film. DVEs differ from standard video switcher effects (often referred to as analog effects) such as wipes or dissolves, in that they deal primarily with resizing, distortion or movement of the image. Modern video switchers often contain internal DVE functionality. Modern DVE devices are incorporated in high-end broadcast video switchers. Early examples of DVE devices found in the broadcast post-production industry include the Ampex Digital Optics (ADO), Quantel DPE-5000, Vital Squeezoom, NEC E-Flex and the Abekas A5x series of DVEs. By 1988, Grass Valley Group caught up with the competition with their Kaleidoscope, which integrated ADO-type effects with their widely used line of broadcast switching gear. DVEs are used by the broadcast television industry in live television production environments like television studios and outside broadcasts. They are commonly used in video post-production.
Read more →
World Database of Happiness

The World Database of Happiness is a web-based archive of research findings on subjective appreciation of life, based in the Erasmus Happiness Economics Research Organization of the Erasmus University Rotterdam in The Netherlands. The database contains both an overview of scientific publications on happiness and a digest of research findings. Happiness is defined as the degree to which an individual judges the quality of his or her life as a whole favorably. Two 'components' of happiness are distinguished: hedonic level of affect (the degree to which pleasant affect dominates) and contentment (perceived realization of wants). == Aims == The World Database of Happiness is a tool to quickly acquire an overview on the ever-growing stream of research findings on happiness Medio 2023 the database covered some 16,000 scientific publications on happiness, from which were extracted 23,000 distributional findings (on how happy people are) and another 24,000 correlational findings (on factors associated with more and less happiness). The first findings date from 1915. == Technique == The World Database of Happiness is a ‘findings archive’, which consists of electronic ‘finding pages’ on which separate research results are described in a standard format and terminology. These finding pages can be selected on various characteristics, such as population studies, the measure of happiness used and observed co-variates. All finding-pages have a specific internet address to which links can be made in scientific review papers or policy recommendations. This allows a concise presentation of many findings in a table, while providing readers with access to detail. == Scientific use == The Database has been cited in 254 scientific papers, for example to access under what conditions economic growth enhances average happiness or to show that rising mean happiness at first raises happiness inequality, but further rise will diminish these differences, or that healthy eating is associated with more happiness, even after controlling for the effect on health Another finding is that relative simple happiness training techniques raise happiness by some 5% == Popular use == The World Database of Happiness is often used by popular media to make lists of the happiest countries around the globe. An example is the Happy Planet Index, which aims to chart sustainable happiness all over the world by combining data on longevity, happiness and the size of the ecological footprint of citizens. == Strengths and weaknesses == The database has a clear conceptual focus, it includes only research findings on subjective enjoyment of one's life as a whole. Thereby it evades the Babel that has haunted the study of happiness for ages. The other side of that coin is that much interesting research is left out. The findings are reported with technical details about measurement and statistical analysis. This detail is welcomed by scholars, but makes the information difficult to digest for lay-persons. Still another limitation is that the determinants of happiness appear to vary considerably across persons and situations, which make it hard to draw general conclusions about the causes of happiness. What is clear is that poor health, separation, unemployment and lack of social contact are all strongly negatively associated with happiness. Another problem for the World database of happiness is that the studies on happiness increase with such a high rate that it gets increasingly difficult to offer a complete overview of all research findings. A further concern is that the Database of Happiness is exclusively focused on hedonic happiness (feeling good) and not on mature happiness that might exist in the face of suffering
Read more →
Self-supervised learning

Self-supervised learning (SSL) is a paradigm in machine learning where a model is trained on a task using the data itself to generate supervisory signals, rather than relying on externally-provided labels. In the context of neural networks, self-supervised learning aims to leverage inherent structures or relationships within the input data to create meaningful training signals. SSL tasks are designed so that solving them requires capturing essential features or relationships in the data. The input data is typically augmented or transformed in a way that creates pairs of related samples, where one sample serves as the input, and the other is used to formulate the supervisory signal. This augmentation can involve introducing noise, cropping, rotation, or other transformations. Self-supervised learning more closely imitates the way humans learn to classify objects. During SSL, the model learns in two steps. First, the task is solved based on an auxiliary or pretext classification task using pseudo-labels, which help to initialize the model parameters. Next, the actual task is performed with supervised or unsupervised learning. Self-supervised learning has produced promising results in recent years, and has found practical application in fields such as audio processing, and is being used by Facebook and others for speech recognition. == Pseudo-labels == Pseudo-labels are automatically generated labels that a model assigns to unlabeled data based on its own predictions. They are widely used in self-supervised and semi-supervised learning, where ground-truth annotations are limited or unavailable. By treating predicted labels as surrogate ground truth, learning algorithms can make use of large quantities of unlabeled data in the training process. Pseudo-labeling also plays an important role in systems that must adapt to concept drift, where the statistical properties of the data change over time. In these scenarios, the model may detect that an incoming instance deviates from previously learned behavior. The system then generates a classification result for that instance, and this predicted class is used as a pseudo-label for updating or retraining model components that are becoming outdated. This approach enables continuous adaptation in dynamic environments without requiring manual annotation. In many adaptive learning pipelines, pseudo-labels are chosen when the classifier produces sufficiently confident predictions, reducing the risk of propagating errors. These pseudo-labeled instances are then incorporated into training to refresh or evolve the model's understanding of emerging data patterns, particularly when existing components show signs of “aging” due to drift or distributional shifts. This strategy reduces reliance on manual labeling while helping maintain long-term model performance. == Types == === Autoassociative self-supervised learning === Autoassociative self-supervised learning is a specific category of self-supervised learning where a neural network is trained to reproduce or reconstruct its own input data. In other words, the model is tasked with learning a representation of the data that captures its essential features or structure, allowing it to regenerate the original input. The term "autoassociative" comes from the fact that the model is essentially associating the input data with itself. This is often achieved using autoencoders, which are a type of neural network architecture used for representation learning. Autoencoders consist of an encoder network that maps the input data to a lower-dimensional representation (latent space), and a decoder network that reconstructs the input from this representation. The training process involves presenting the model with input data and requiring it to reconstruct the same data as closely as possible. The loss function used during training typically penalizes the difference between the original input and the reconstructed output (e.g. mean squared error). By minimizing this reconstruction error, the autoencoder learns a meaningful representation of the data in its latent space. === Contrastive self-supervised learning === For a binary classification task, training data can be divided into positive examples and negative examples. Positive examples are those that match the target. For example, if training a classifier to identify birds, the positive training data would include images that contain birds. Negative examples would be images that do not. Contrastive self-supervised learning uses both positive and negative examples. The loss function in contrastive learning is used to minimize the distance between positive sample pairs, while maximizing the distance between negative sample pairs. An early example uses a pair of 1-dimensional convolutional neural networks to process a pair of images and maximize their agreement. Contrastive Language-Image Pre-training (CLIP) allows joint pretraining of a text encoder and an image encoder, such that a matching image-text pair have image encoding vector and text encoding vector that span a small angle (having a large cosine similarity). InfoNCE (Noise-Contrastive Estimation) is a method to optimize two models jointly, based on Noise Contrastive Estimation (NCE). Given a set X = { x 1 , … x N } {\displaystyle X=\left\{x_{1},\ldots x_{N}\right\}} of N {\displaystyle N} random samples containing one positive sample from p ( x t + k ∣ c t ) {\displaystyle p\left(x_{t+k}\mid c_{t}\right)} and N − 1 {\displaystyle N-1} negative samples from the 'proposal' distribution p ( x t + k ) {\displaystyle p\left(x_{t+k}\right)} , it minimizes the following loss function: L N = − E X [ log ⁡ f k ( x t + k , c t ) ∑ x j ∈ X f k ( x j , c t ) ] {\displaystyle {\mathcal {L}}_{\mathrm {N} }=-\mathbb {E} _{X}\left[\log {\frac {f_{k}\left(x_{t+k},c_{t}\right)}{\sum _{x_{j}\in X}f_{k}\left(x_{j},c_{t}\right)}}\right]} === Non-contrastive self-supervised learning === Non-contrastive self-supervised learning (NCSSL) uses only positive examples. Counterintuitively, NCSSL converges on a useful local minimum rather than reaching a trivial solution, with zero loss. For the example of binary classification, it would trivially learn to classify each example as positive. Effective NCSSL requires an extra predictor on the online side that does not back-propagate on the target side. === Joint-Embedding and Predictive Architectures === A major class of self-supervised learning moves beyond contrastive pairs, instead maximizing the agreement between views while preventing collapse through statistical constraints. Rooted in Deep Canonical Correlation Analysis (Deep CCA), this approach includes Joint-Embedding Architectures (JEA) like Barlow Twins and VICReg, which enforce covariance constraints to learn invariant representations without negative sampling. Deep Latent Variable Path Modelling (DLVPM) generalizes this to multimodal systems, using path models to enforce correlation and orthogonality across diverse data types. In 2022 Yann LeCun introduced Joint-Embedding Predictive Architectures (JEPA) as a step towards decision making, reasoning, and autonomous human intelligence in machines, including self-improvement through autonomous learning. Founded in representation learning, LeCun included the concept of a “world model” in JEPA which aims to enable machines to replicate human intellect by providing machines with a concept for the world in which they exist. Unlike autoencoders, JEPAs operate entirely in latent space, avoiding pixel-level noise to focus on semantic structure. Rather than just learning invariance, JEPAs learn by predicting masked latent representations from visible context. JEPA has been applied to domains such as image analysis, audio processing, and motion in images and video. == Comparison with other forms of machine learning == SSL belongs to supervised learning methods insofar as the goal is to generate a classified output from the input. At the same time, however, it does not require the explicit use of labeled input-output pairs. Instead, correlations, metadata embedded in the data, or domain knowledge present in the input are implicitly and autonomously extracted from the data. These supervisory signals, extracted from the data, can then be used for training. SSL is similar to unsupervised learning in that it does not require labels in the sample data. Unlike unsupervised learning, however, learning is not done using inherent data structures. Semi-supervised learning combines supervised and unsupervised learning, requiring only a small portion of the learning data be labeled. In transfer learning, a model designed for one task is reused on a different task. Training an autoencoder intrinsically constitutes a self-supervised process, because the output pattern needs to become an optimal reconstruction of the input pattern itself. However, in current jargon, the term 'self-supervised' often refers to tasks based on a pretext-task training setup
Read more →
Depth peeling

In computer graphics, depth peeling is an exact multipass method of order-independent transparency that extracts transparent fragments into depth layers and composites those layers in depth order. Depth peeling has the advantage of being able to generate correct results even for complex images containing intersecting transparent objects. == Method == Depth peeling works by rendering the image multiple times. Depth peeling uses two Z buffers, one that works conventionally, and one that is not modified, and sets the minimum distance at which a fragment can be drawn without being discarded. For each pass, the previous pass' conventional Z-buffer is used as the minimal Z-buffer, so each pass removes already-captured nearer fragments and draws the next depth layer behind them. The resulting images can then be composited in depth order to form a single image. A major drawback of classical depth peeling is performance: it requires one geometry pass per peeled layer, so scenes with high depth complexity require many passes that each re-rasterize the transparent geometry. Later variants reduce the number of passes by peeling multiple layers or both front and back layers in a pass. Dual depth peeling reduces the geometry-pass count from N to N/2+1 by peeling one layer from the front and one from the back in each pass, while multi-layer depth peeling peels several layers per pass and reported up to an 8x speed-up in RGBA8 settings.
Read more →
Qapital

Qapital is a personal finance mobile application (app) for the iOS and Android operating systems, developed by Qapital, LLC. The app is designed to motivate users to save money through a gamification of their spending behavior. It moves money from a user's checking account to a separate Qapital account, when certain rules are triggered. Its database is used by psychology professor Dan Ariely to study consumer behavior. Qapital was released in Sweden in 2013, then in the US in early 2015. The application was later withdrawn from the Swedish market in April 2015, in order to focus on the US market. == History == The idea for Qapital was conceived by ex-bankers in Sweden. The software was designed by twin brothers Daniel and Andreas Källbom of Studio Källbom and released in Sweden in December 2013. The original software was a personal finance dashboard, similar to Mint.com, to show its users how they spent their money. Qapital introduced the app into the US market with a different design in 2014 and started focusing exclusively on the US market. The app was re-designed to focus on building savings rather than managing personal finances. The Swedish version shut down in April 2015. The app was initially restricted to the iOS platform, but an Android version was released at the end of 2015. Shortly after its US launch, Qapital invited psychology professor Dan Ariely to join its team as its "chief behavioral economist". He uses the app's database to conduct research into behavioral economics and Qapital in turn uses Ariely's research in design and programming decisions. In 2017, Qapital added checking and debit card services to the app. == Concept and features == Qapital is a free personal finance app for iOS and Android devices, intended to encourage its users to save money. Qapital directs each of its users to set savings goals, then automatically transfers money from their checking account to an account for savings, when a rule established in the app is met. It uses the "if this then that" (IFTTT) rule-based web-service. For example, one rule could be that if a user purchases a cup of coffee, then the app will round up the charge to the nearest dollar and deposit the difference into savings. Users connect their bank accounts to Qapital, so it knows when purchases are made. When a rule is met, money for savings are transferred to a Qapital account operated in partnership with Lincoln Savings Bank. As of 2015, Qapital can connect to more than 180 other apps, such as Facebook, Twitter, Dropbox and Instagram. For example, connecting to Jawbone allows the user to set a rule that if they take a certain number of steps during the day, a set amount of money is transferred to savings. The app also allows users to monitor activity among their other financial accounts, such as deposits and withdrawals. == Reception == In an October 2015 review, PC Magazine gave Qapital four out of five marks and an editor rating of "excellent." The review praised the app for having a "lovely design" and criticized it for being a, "bit simplistic in some of its rules." Bankrate, in a May 2015 review, gave the app a score of 3/5 for "ease of use," 5/5 for "features," 4/5 for "effectiveness," 4/5 for "value," for a total score of 16/20. The reviewer criticized Qapital's savings account for providing a low-interest rate, but concluded that its numerous features make the app "intriguing" and "it would be difficult to find a standard bank app more fun to use than Qapital."
Read more →
Display list

A display list, also called a command list in Direct3D 12 and a command buffer in Vulkan, is a series of graphics commands or instructions that are run when the list is executed. Systems that make use of display list functionality are called retained mode systems, while systems that do not are as opposed to immediate mode systems. In OpenGL, display lists are useful to redraw the same geometry or apply a set of state changes multiple times. This benefit is also used with Direct3D 12's bundle command lists. In Direct3D 12 and Vulkan, display lists are regularly used for per-frame recording and execution. == Origins in vector displays == The vector monitors or calligraphic displays of the 1960s and 1970s used electron beam deflection to draw line segments, points, and sometimes curves directly on a CRT screen. Because the image would immediately fade, it needed to be redrawn many times a second (storage tube CRTs retained the image until blanked, but they were unsuitable for interactive graphics). To refresh the display, a dedicated CPU called a Display Processor or Display Processing Unit (DPU) was used, which had a memory buffer for a "display list", "display file", or "display program" containing line segment coordinates and other information. Advanced Display Processors also supported control flow instructions, which were useful for drawing repetitive graphics such as text, and some could perform coordinate transformations such as 3D projection. == Home computer display list functionality == One of the earliest systems with a true display list was the Atari 8-bit computers. The display list (actually called so in Atari terminology) is a series of instructions for ANTIC, the video co-processor used in these machines. This program, stored in the computer's memory and executed by ANTIC in real-time, can specify blank lines, any of six text modes and eight graphics modes, which sections of the screen can be horizontally or vertically fine-scrolled, and trigger Display List Interrupts (called raster interrupts or HBI on other systems). The Amstrad PCW family contains a Display List function called the 'Roller RAM'. This is a 512-byte RAM area consisting of 256 16-bit pointers in RAM, one for each line of the 720 × 256 pixel display. Each pointer identifies the location of 90 bytes of monochrome pixels that hold the line's 720 pixel states. The 90 bytes of 8 pixel states are spaced at 8-byte intervals, so there are 7 unused bytes between each byte of pixel data. This suits how the text-orientated PCW constructs a typical screen buffer in RAM, where the first character's 8 rows are stored in the first 8 bytes, the second character's rows in the next 8 bytes, and so on. The Roller RAM was implemented to speed up display scrolling as it would have been unacceptably slow for its 3.4 MHz Z80 to move up the 23 KB display buffer 'by hand' i.e. in software. The Roller RAM starting entry used at the beginning of a screen refresh is controlled by a Z80-writable I/O register. Therefore, the screen can be scrolled simply by changing this I/O register. Another system using a Display List-like feature in hardware is the Amiga, which, not coincidentally, was also designed by some of the same people who developed the custom hardware for the Atari 8-bit computers. Once directed to produce a display mode, it would continue to do so automatically for every following scan line. The computer also included a dedicated co-processor, called "Copper", which ran a simple program or 'Copper List' intended for modifying hardware registers in sync with the display. The Copper List instructions could direct the Copper to wait for the display to reach a specific position on the screen, and then change the contents of hardware registers. In effect, it was a processor dedicated to servicing raster interrupts. The Copper was used by Workbench to mix multiple display modes (multiple resolutions and color palettes on the monitor at the same time), and by numerous programs to create rainbow and gradient effects on the screen. The Amiga Copper was also capable of reconfiguring the sprite engine mid-frame, with only one scanline of delay. This allowed the Amiga to draw more than its 8 hardware sprites, so long as the additional sprites did not share scanlines (or the one scanline gap) with more than 7 other sprites. i.e., so long as at least one sprite had finished drawing, another sprite could be added below it on the screen. Additionally, the later 32-bit AGA chipset allowed the drawing of bigger sprites (more pixels per row) while retaining the same multiplexing. The Amiga also had dedicated block-shifter ("blitter") hardware, which could draw larger objects into a framebuffer. This was often used in place of, or in addition to, sprites. In more primitive systems, the results of a display list can be simulated, though at the cost of CPU-intensive writes to certain display modes, color control, or other visual effect registers in the video device, rather than a series of rendering commands executed by the device. Thus, one must create the displayed image using some other rendering process, either before or while the CPU-driven display generation executes. In many cases, the image is also modified or re-rendered between frames. The image is then displayed in various ways, depending on the exact way in which the CPU-driven display code is implemented. Examples of the results possible on these older machines requiring CPU-driven video include effects such as Commodore 64/128's FLI mode, or Rainbow Processing on the ZX Spectrum. == Usage in OpenGL == To delimit a display list, the glNewList and glEndList functions are used, and to execute the list, the glCallList function is used. Almost all rendering commands that occur between the function calls are stored in the display list. Commands that affect the client state are not stored in display lists. Display lists are named with an integer value, and creating a display list with the same name as one already created overrides the first. The glNewList function expects two arguments: an integer representing the name of the list, and an enumeration for the compilation mode. The two modes include GL_COMPILE_AND_EXECUTE, which compiles and immediately executes, and GL_COMPILE, which only compiles the list. Display lists enable the use of the retained mode rendering pattern, which is a system in which graphics commands are recorded (retained) to execute in succession at a later time. This is contrary to immediate mode, where graphics commands are immediately executed on client calls. == Usage in Direct3D 12 == Command lists are created using the ID3D12Device::CreateCommandList function. Command lists may be created in several types: direct, bundle, compute, copy, video decode, video process, and video encoding. Direct command lists specify that a command list the GPU can execute, and doesn't inherit any GPU state. Bundles, are best used for storing and executing small sets of commands any number of times. This is used differently than regular command lists, where commands stored in a command list are typically executed only once. Compute command lists are used for general computations, with a common use being calculating mipmaps. A copy command list is strictly for copying and the video decode and video process command lists are for video decoding and processing respectively. Upon creation, command lists are in the recording state. Command lists may be re-used by calling the ID3D12GraphicsCommandList::Reset function. After recording commands, the command list must be transitioned out of the recording state by calling ID3D12GraphicsCommandList::Close. The command list is then executed by calling ID3D12CommandQueue::ExecuteCommandLists.
Read more →
EPages

ePages is an e-commerce software that allows merchants to create and run online shops in the cloud. The number of shops based on ePages is currently 140,000 worldwide. ePages software is regularly updated due to its Software-as-a-Service model. An investor in the company is United Internet, with a 25% stake. ePages focuses upon distributing its products mainly through hosting providers. ePages is headquartered in Hamburg, with additional offices Barcelona, Jena, and Bilbao. == History == The name ePages was used for the first time for software in 1997 to market "Intershop ePages". In 2002, the product line then called Intershop 4 was taken over by ePages GmbH and renamed to ePages. == Features == Depending on the ePages product and packages offered by hosting providers, merchants can sell up to an unlimited number of items. Users can offer their products and services in 15 languages and with all currencies. With ePages, merchants can use web marketing tools; e.g. newsletters, coupons or social media plug-ins for social commerce.
Read more →
My Drama

My Drama (also may be stylised as MyDrama) is a global streaming service specializing in vertical video series for Duanju. It is owned by the company Holywater Tech. The platform focuses on short-form, emotional storytelling optimized for smartphone viewing, offering content in over 30 languages across 190 countries. == History == My Drama was launched in 2024 by Holywater Tech, founded by Ukrainian entrepreneur Bogdan Nesvit and Anatolii Kasianov. The service gained international traction as part of a growing market for short-form vertical storytelling, influenced by mobile-first entertainment trends. My Drama primarily streams serialized vertical dramas, which are short-form episodes around 1-2 minutes in length designed for mobile consumption. Many series are adaptations of successful stories originally published on Holywater Tech's book platform My Passion. The platform employs AI technology in areas such as content recommendation and story generation, and is one of several Holywater apps focused on interactive entertainment. In 2024, My Drama won a People's Voice award at the 28th Annual Webby Awards. In 2025, My Drama received a Gold Award at the MUSE Creative Awards in the Mobile App: Video Streaming Services category. In 2025, the company received strategic investment from Fox Entertainment, aimed at expanding content creation capabilities and producing over 200 vertical video series. As of 2025, My Drama has produced over 56 titles and reached more than 40 million lifetime users, according to media reports. In January 2026, Holywater Tech raised $22 million in funding to expand its microdrama business in the United States. The investment round was led by Horizon Capital, with participation from U.S.-based investors including Endeavor Catalyst and Wheelhouse. The funding is intended to support the development of Holywater Tech's mobile-first vertical video platform, My Drama, as well as the company's AI-driven content initiatives, such as AI-assisted comics and anime. In February 2026, Holywater bought Jeynix, a studio that uses AI for special effects. This deal helps the company make better-quality shows and translate them into different languages much faster. == Partnerships == In 2024, Holywater Tech entered a partnership with Latin American studio Elefantec Global to distribute vertical dramas in Spanish-language markets. In early 2026, Fox Entertainment entered into a partnership with content creator Dhar Mann to produce a slate of 40 original vertical microdrama series. Under the agreement, the series debut exclusively on the My Drama platform, while global distribution is managed by Fox Entertainment Global. == Reception == My Drama has been highlighted in discussions of the global rise of vertical short drama platforms and has been compared with similar apps such as ReelShort and DramaBox.
Read more →
Z-order

Z-order is an ordering of overlapping two-dimensional objects, such as windows in a stacking window manager, shapes in a vector graphics editor, or objects in a 3D application. One of the features of a typical GUI is that windows may overlap, so that one window hides part or all of another. When two windows overlap, their Z-order determines which one appears on top of the other. == Definition == The term "Z-order" refers to the order of objects along the Z-axis. In coordinate geometry, X typically refers to the horizontal axis (left to right), Y to the vertical axis (up and down), and Z refers to the axis perpendicular to the other two (forward or backward). One can think of the windows in a GUI as a series of planes parallel to the surface of the monitor. The windows are therefore stacked along the Z-axis, and the Z-order information thus specifies the front-to-back ordering of the windows on the screen. An analogy would be some sheets of paper scattered on top of a table, each sheet being a window, the table your computer screen, and the top sheet having the highest Z value. == Use == Typically, users of a GUI can affect the Z-order by selecting a window to be brought to the foreground (that is, "above" or "in front of" all the other windows). Some window managers allow interaction with windows while they are not in the foreground, while others will bring a window to the front whenever it receives input from the user. It is also possible for special windows to be designated "always on top"; these are then fixed to the top of the Z-order so that (with few exceptions) no other window can overlap them. When dealing with visual objects on a computer screen, an object with a Z-order of 1 would be visually "underneath" an object with a Z-order of 2 or greater. This is the same as making "layers" of objects where the Z-order determines what object is on top of another. An HTML page can use CSS to specify the Z-order so that some objects can be layered over others. Z-ordering is also used in 3D applications to determine object visibility based on overlap from other objects. This confers a speed advantage to the user as the computer does not need to render unseen objects. In practice, of course, some objects may be only partially obscured, and this is a complication that must be taken into account. In early real-time 3D graphics, Z-order was applied on a per-polygon basis to avoid using Z-buffer, which was considered expensive at the time. In modern 3D graphics, Z-order is used for order-dependent rendering, for example with semi-transparent objects. It can also be used to reduce the problem of Z-fighting, by either rendering farther objects first and then using weak inequality as the depth test or, conversely, rendering front-to-back and using strict inequality. == z-index == The actual number assigned to a particular place in the Z-order is sometimes known as the z-index. In particular the CSS property that sets the stack order of specific elements is known as the z-index. An element with greater stack order is always in front of another element with lower stack order. Negative values can also be used in the same manner. A negative value will appear behind a positive one. z-index only works on elements that have a position value (e.g. position: relative;) and for many coders, this one of the first things to investigate when debugging why the z-index isn't working. Like all other CSS properties, it can be set with JavaScript, with the following syntax:
Read more →