AI Generator Uses Water

AI Generator Uses Water — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Automated storage and retrieval system

An automated storage and retrieval system (ASRS or AS/RS) consists of a variety of computer-controlled systems for automatically placing and retrieving loads from defined storage locations. Automated storage and retrieval systems (AS/RS) are typically used in applications where: There is a very high volume of loads being moved into and out of storage Storage density is important because of space constraints No value is added in this process (no processing, only storage and transport) Accuracy is critical because of potential expensive damages to the load An AS/RS can be used with standard loads as well as nonstandard loads, meaning that each standard load can fit in a uniformly-sized volume; for example, the film canisters in the image of the Defense Visual Information Center are each stored as part of the contents of the uniformly sized metal boxes, which are shown in the image. Standard loads simplify the handling of a request of an item. In addition, audits of the accuracy of the inventory of contents can be restricted to the contents of an individual metal box, rather than undergoing a top-to-bottom search of the entire facility, for a single item. They can also be used in self storage places. == Overview == AS/RS systems are designed for automated storage and retrieval of parts and items in manufacturing, distribution, retail, wholesale and institutions. They first originated in the 1960s, initially focusing on heavy pallet loads but with the evolution of the technology the handled loads have become smaller. The systems operate under computerized control, maintaining an inventory of stored items. Retrieval of items is accomplished by specifying the item type and quantity to be retrieved. The computer determines where in the storage area the item can be retrieved from and schedules the retrieval. It directs the proper automated storage and retrieval machine (SRM) to the location where the item is stored and directs the machine to deposit the item at a location where it is to be picked up. A system of conveyors and or automated guided vehicles is sometimes part of the AS/RS system. These take loads into and out of the storage area and move them to the manufacturing floor or loading docks. To store items, the pallet or tray is placed at an input station for the system, the information for inventory is entered into a computer terminal and the AS/RS system moves the load to the storage area, determines a suitable location for the item, and stores the load. As items are stored into or retrieved from the racks, the computer updates its inventory accordingly. The benefits of an AS/RS system include reduced labor for transporting items into and out of inventory, reduced inventory levels, more accurate tracking of inventory, and space savings. Items are often stored more densely than in systems where items are stored and retrieved manually. Within the storage, items can be placed on trays or hang from bars, which are attached to chains/drives in order to move up and down. The equipment required for an AS/RS include a storage & retrieval machine (SRM) that is used for rapid storage and retrieval of material. SRMs are used to move loads vertically or horizontally, and can also move laterally to place objects in the correct storage location. The trend towards Just In Time production often requires sub-pallet level availability of production inputs, and AS/RS is a much faster way of organizing the storage of smaller items next to production lines. The Material Handling Institute of America (MHIA), the non-profit trade association for the material handling world, and its members have categorised AS/RS into two primary segments: Fixed Aisle and Carousels/Vertical Lift Modules (VLMs). Both sets of technologies provide automated storage and retrieval for parts and items, but use different technologies. Each technology has its unique set of benefits and disadvantages. Fixed Aisle systems are characteristically larger systems whereas carousels and Vertical Lift Modules are used individually or grouped, but in small to medium-sized applications. A fixed-aisle AS/R machine (stacker crane) is one of two main designs: single-masted or double masted. Most are supported on a track and ceiling guided at the top by guide rails or channels to ensure accurate vertical alignment, although some are suspended from the ceiling. The 'shuttles' that make up the system travel between fixed storage shelves to deposit or retrieve a requested load (ranging from a single book in a library system to a several ton pallet of goods in a warehouse system). The entire unit moves horizontally within an aisle, while the shuttles are able to elevate up to the necessary height to reach the load, and can extend and retract to store or retrieve loads that are several positions deep in the shelving. A semi-automated system can be achieved by utilizing only specialized shuttles within an existing rack system. Another AS/RS technology is known as shuttle technology. In this technology the horizontal movement is made by independent shuttles each operating on one level of the rack while a lift at a fixed position within the rack is responsible for the vertical movement. By using two separate machines for these two axes the shuttle technology is able to provide higher throughput rates than stacker cranes. Storage and Retrieval Machines pick up or drop off loads to the rest of the supporting transportation system at specific stations, where inbound and outbound loads are precisely positioned for proper handling. In addition, there are several types of Automated Storage & Retrieval Systems (AS/RS) devices called Unit-load AS/RS, Mini-load AS/RS, Mid-Load AS/RS, Vertical Lift Modules (VLMs), Horizontal Carousels and Vertical Carousels. These systems are used either as stand-alone units or in integrated workstations called pods or systems. These units are usually integrated with various types of pick to light systems and use either a microprocessor controller for basic usage or inventory management software. These systems are ideal for increasing space utilization up to 90%, productivity levels by 90%, accuracy to 99.9%+ levels and throughput up to 750 lines per hour/per operator or more depending on the configuration of the system. == Horizontal carousels == Robotic Inserter/Extractor devices can be used for horizontal carousels. The robotic device is positioned in the front or rear of up to three horizontal carousels tiered high. The robot grabs the tote required in the order and often replenishes at the same time to speed up throughput. The tote(s) are then delivered to a conveyor, which routes it to a work station for picking or replenishing. Up to eight transactions per minute per unit can be done. Totes or containers up to 36" x 36" x 36" can be used in a system. On a simplistic level, horizontal carousels are also often used as "rotating shelving". With simple "fetch" command, items are brought to the operator and otherwise wasted space is eliminated. AS/RS Applications: Most applications of AS/RS technology have been associated with warehousing and distribution operations. An AS/RS can also be used to store raw materials and work in process in manufacturing. Three application areas can be distinguished for AS/RS: (1) Unit load storage and handling, (2) Order picking, and (3) Work in process storage. Unit load storage and retrieval applications are represented by unit load AS/RS and deep-lane storage systems. These kinds of applications are commonly found in warehousing for finishing goods in a distribution center, rarely in manufacturing. Deep-lane systems are used in the food industry. As described above, order picking involves retrieving materials in less than full unit load quantities. Minilpass, man-on board, and items retrieval systems are used for this second application area. Work in process storage is a more recent application of automated storage technology. While it is desirable to minimize the amount of work in process, WIP is unavoidable and must be effectively managed. Automated storage systems, either automated storage/retrieval systems or carousel systems, represent an efficient way to store materials between processing steps, particularly in batch and job shop production. In high production, work in process is often carried between operations by conveyor system, which this serve both storage and transport functions. === Inventory Category-specific AS/RS === Each inventory category—raw materials, work-in-process, and finished goods—requires its own specialized Automated Storage and Retrieval System (AS/RS). Particularly for work-in-process (WIP) inventories, due to variations in manufacturing processes, the AS/RS systems are significantly different in design and function, tailored specifically to match unique handling, storage, and retrieval requirements === Installed applications === Installed applications of this technology can be wide-ranging. In some librarie
Read more →
Software-defined mobile network

Software-defined mobile networking (SDMN) is an approach to the design of mobile networks where all protocol-specific features are implemented in software, maximizing the use of generic and commodity hardware and software in both the core network and radio access network (RAN). == History == Through the 20th century, telecommunications technology was driven by hardware development, with most functions implemented in special-purpose equipment. In the early 2000s, generally available CPUs became cheap enough to enable commercial software-defined radio (SDR) technology and softswitches. SDMN extends these trends into the design of mobile networks, moving nearly all network functions into software. The term "software-defined mobile network" first appeared in public literature in early 2014, used independently by Lime Microsystems and researchers from University of Oulu, Finland. == Limitations of hardware-based mobile networks == Mobile networks based on special-purpose hardware suffer from the following limitations: They have limited provisions for upgrades and usually must be replaced entirely when new standards are introduced. The individual components are not scalable in terms of performance and capacity, because the capacity of a component is fixed by the hardware implementation. Specialized equipment and its associated specialized software require vendor-specific training for the mobile operator's staff. Specialized hardware systems are usually supported and serviced by a single vendor, resulting in vendor lock-in. == Characteristics of SDMN designs == === Use of software-defined radio === SDR is an important element of SDMN, because it replaces protocol-specific radio hardware with protocol-agnostic digital transceivers. While many earlier digital radio systems used field-programmable gate arrays (FPGAs) or special-purposed digital signal processors (DSPs) for calculations on baseband radio waveforms, the SDMN approach moves all of the baseband processing into general-purpose CPUs. SDMN radio systems also use hardware with publicly-documented interfaces that is designed to be readily reproducible by multiple manufacturers. === Commodity components === SDMN designs avoid the use of components that are specialized as to their functions or that are available from only a single vendor. This is true of both the hardware and software elements of the network. === Software switching and transcoding === The telephony switches of SDMN networks are software-based, including software transcoding for speech codecs. === Centralized, distributed, or hybrid? === A new SDN architecture for wireless distribution systems (WDSs) is explored that eliminates the need for multi-hop flooding of route information and therefore enables WDNs to easily expand. The key idea is to split network control and data forwarding by using two separate frequency bands. The forwarding nodes and the SDN controller exchange link-state information and other network control signaling in one of the bands, while actual data forwarding takes place in the other band. == Advantages of SDMN == The SDMN approach has many advantages over hardware-based mobile network designs. Because SDMN hardware is protocol-agnostic, upgrades are software-only, even across technology generations. In the radio network, these changes can even be made on a site-by-site basis. Because SDMN hardware is designed to be easily sourced and reproduced: SDMN equipment can be serviced by a wider range of vendors, lowering maintenance costs. SDMN equipment can be manufactured anywhere in the world, lowering production costs. Because SDMN software is based on commodity operating systems and development tools: Support staff can be trained more quickly because they are already familiar with the underlying software systems. Many aspects of the SDMN can be monitored and managed with pre-existing tools, because they are already available in the commodity operating systems. Because SDMN network components run on general purpose computers, the network components can be scaled up in capacity by adding more computing power.
Read more →
Macroelectronics

Macroelectronics are flexible electronics that cover a large area. The most visible example of macroelectronics is flat-panel displays. Other emerging applications include rollable display, printable thin film solar cell and electronic skin. Flat-panel displays fabricated on glass substrates are fragile so fabricating directly on flexible substrates, such as polymers is being explored. Displays made on thin polymer substrates can be more rugged than glass. In September 2005, Philips Polymer Vision revealed the world's first prototype of a rollable electronic reader, which can unfold to a 5-inch display and roll back into a pocket-size (100×60×20 mm) device. Thin-film devices on flexible polymer substrates can lend themselves to low-cost fabrication processes (i.e., roll-to-roll printing), resulting in lightweight, rugged and flexible macroelectronic products.
Read more →
Enterprise social software

Enterprise social software (also known as or regarded as a major component of Enterprise 2.0), comprises social software as used in "enterprise" (business/commercial) contexts. It includes social and networked modifications to corporate intranets and other classic software platforms used by large companies to organize their communication. In contrast to traditional enterprise software, which imposes structure prior to use, enterprise social software tends to encourage use prior to providing structure. Carl Frappaolo and Dan Keldsen defined Enterprise 2.0 in a report written for Association for Information and Image Management (AIIM) as "a system of web-based technologies that provide rapid and agile collaboration, information sharing, emergence and integration capabilities in the extended enterprise". == Applications == === Functionality === Social software for an enterprise must (according to Andrew McAfee, Associate Professor, Harvard Business School) have the following functionality to work well: Search: allowing users to search for other users or content Links: grouping similar users or content together Authoring: including blogs and wikis Tags: allowing users to tag content Extensions: recommendations of users; or content based on profile Signals: allowing people to subscribe to users or content with RSS feeds McAfee recommends installing easy-to-use software which does not impose any rigid structure on users. He envisages an informal roll-out, but on a common platform to enable future collaboration between areas. He also recommends strong and visible managerial support to achieve this. In 2007 Dion Hinchcliffe expanded the list above by adding the following four functions: Freeform function: no barriers to authorship (meaning free from a learning curve or from restrictions) Network-oriented function, requiring web-addressable content in all cases Social function: stressing transparency (to access), diversity (in content and community members) and openness (to structure) Emergence function: requiring the provision of approaches that detect and leverage the collective wisdom of the community Enterprise search differs from a typical web search in its focus on "use within an organization by employees seeking information held internally, in a variety of formats and locations, including databases, document management systems, and other repositories". === Criticism === There has been recent criticism that the adaptation of the social paradigm (e.g. openness and altruistic behavior) does not always work well for the enterprise setting, which led some authors to question the proper functioning of enterprise social software. The findings from a novel study suggests that free and non-anonymous sharing of trusted information (beyond marketing or product information) is significantly influenced by concerns from business users.
Read more →
Pocketbook (application)

Pocketbook was a Sydney-based free budget planner and personal finance app launched in 2012. The app helped users setup and manage budgets, track spending and manage bills. As of 2016 Pocketbook claimed to support over 250,000 Australians, in January 2018 that number was 435,000. After being acquired by Zip Co Ltd in 2016, it was announced in 2022 that the app was to be shut down and all user accounts deleted. == History == Pocketbook was founded by Alvin Singh and Bosco Tan in 2012. It was conceived in 2011 in a Wolli Creek apartment as a tool for Alvin and Bosco to take control of their money. In 2013, Pocketbook raised $500,000 from technology fund Tank Stream Ventures, and a group of investors including TV personality David Koch, Geoff Levy, David Shein and Peter Cooper. In September 2016 Digital retail finance and payment industry player zipMoney (now trading as Zip Co Limited) acquired Pocketbook in a $7.5m deal == Features == The app synced with the bank account of users and would organize spending into different categories. Users could also be reminded of bill payments, analyse spending and set spending limits. They can also be alerted of fraudulent transactions and deductions. The app employs security measures like end to end encryption, CloudFlare protection, fraud detection, identity protection etc. Pocketbook was available via web and mobile version. == Awards == Personal Finance Innovator of the Year by Fintech Business Awards 2017 Innovator of the Year by OPTUS MyBusiness Awards 2017 Best Finance App of 2016 by Australian Fintech Best Personal Finance App: Pocketbook won the 2016 Finder Innovation Awards, presented at a gala dinner hosted by media personality and The New Inventors presenter James O'Loghlin. Best Mobile App of the Year Winner: StartCon hosted the first annual Australasian Startup Awards. Over 200 nominations in 14 categories and an overall winner were reviewed, and winners were determined by public voting, with over 63,000 votes in total. Best New Startup 2014 by StartupSmart. Finalist in the SWIFT Innotribe startup competition in Dubai in 2013.
Read more →
Content adaptation

Content adaptation is the action of transforming content to adapt to device capabilities. Content adaptation is usually related to mobile devices, which require special handling because of their limited computational power, small screen size, and constrained keyboard functionality. Content adaptation could roughly be divided to two fields: Media content adaptation that adapts media files. Browsing content adaptation that adapts a website to mobile devices. == Browsing content adaptation == Advances in the capabilities of small, mobile devices such as mobile phones (cell phones) and Personal Digital Assistants have led to an explosion in the number of types of device that can now access the Web. Some commentators refer to the Web that can be accessed from mobile devices as the Mobile Web. The sheer number and variety of Web-enabled devices poses significant challenges for authors of websites who want to support access from mobile devices. The W3C Device Independence Working Group described many of the issues in its report Authoring Challenges for Device Independence. Content adaptation is one approach to a solution. Rather than requiring authors to create pages explicitly for each type of device that might request them, content adaptation transforms an author's materials automatically. For example, content might be converted from a device-independent markup language, such as XDIME, an implementation of the W3C's DIAL specification, into a form suitable for the device, such as XHTML Basic, C-HTML, or WML. Similarly, a suitable device-specific CSS style sheet or a set of in-line styles might be generated from abstract style definitions. Likewise, a device specific layout might be generated from abstract layout definitions. Once created, the device-specific materials form the response returned to the device from which the request was made. Another way is to use the latest trend responsive design based on CSS, covered in this article (RWD). Content adaptation requires a processor that performs the selection, modification, and generation of materials to form the device-specific result. IBM's Websphere Everyplace Mobile Portal (WEMP), BEA Systems' WebLogic Mobility Server, Morfeo's MyMobileWeb, and Apache Cocoon are examples of such processors. Wurfl and WALL are popular open source tools for content adaptation. WURFL is an XML-based Device Description Repository with APIs to access the data in Java and PHP (and other popular programming languages). WALL (Wireless Abstraction Library) lets a developer author mobile pages which look like plain HTML, but converts them to WML, C-HTML, or XHTML Mobile Profile, depending on the capabilities of the device from which the HTTP request originates. GreasySpoon lets the developer build plugins for content editing, in JavaScript, Ruby (programming language), and more, just like the Firefox application GreaseMonkey. Alembik (Media Transcoding Server) is a Java (J2EE) application providing transcoding services for variety of clients and for different media types (image, audio, video, etc.). It is fully compliant with OMA's Standard Transcoder Interface specification and is distributed under the LGPL open source license. In 2007, the first large scale carrier-grade deployments of content transformation, on existing mass-market handsets, with no software download required, were deployed by Vodafone in the UK and globally for Yahoo! oneSearch, using the Novarra Vision solution. Novarra's content adaptation solution had been used in enterprise intranet deployments as early as 2003 (at that time, the platform was named "Engines for Wireless Data"). InfoGin, the 9-year-old content-adaptation company with customers like Vodafone, Orange, Telefónica and PCCW. The patented "Web to Mobile adaptation", Mobile Matrix Transcoder, Multimedia and Documents transcoders, Video adaptation supporte. Launched in 2007, Bytemobile's Web Fidelity Service was another carrier-grade, commercial infrastructure solution, which provided wireless content adaptation to mobile subscribers on their existing mass-market handsets, with no client download required.
Read more →
Digital journalism

Digital journalism, also known as netizen journalism or online journalism, is a contemporary form of journalism where editorial content is distributed via the Internet, as opposed to publishing via print or broadcast. What constitutes digital journalism is debated amongst scholars. However, the primary product of journalism, which is news and features on current affairs, is presented solely or in combination as text, audio, video, or some interactive forms like storytelling stories or newsgames and disseminated through digital media technology. Fewer barriers to entry, lowered distribution costs and diverse computer networking technologies have led to the widespread practice of digital journalism. It has democratized the flow of information that was previously controlled by traditional media including newspapers, magazines, radio and television. Most readers expect online journalists to be reliable and competent, but these journalists often fail to meet this standard because they have very short deadlines and do not have enough resources to produce decent work. Some have asserted that a greater degree of creativity can be exercised with digital journalism when compared to traditional journalism and traditional media. The digital aspect may be central to the journalistic message and remains, to some extent, within the creative control of the writer, editor and/or publisher. It has been acknowledged that reports of its growth have tended to be exaggerated. In fact, a 2019 Pew survey showed a 16% decline in the time spent on online news sites since 2016. In the United States, reports issued by the Federal Communications Commission (FCC) in 2011 and by the Government Accountability Office (GAO) and the Congressional Research Service (CRS) in 2023 found that increases in newsroom staffing at digital-native news websites from 2008 to 2020 were not offsetting cuts in newsroom staffing among newspapers (which numbered in the tens of thousands of jobs), and that newspapers and television (which had been seeing declining newsroom staffing alongside newspapers) still employed the majority of payrolled newsroom staff in the United States in 2022 while online-only news websites employed less than 10%. The GAO and CRS reports noted further that the reduction in subscription and advertising revenue for the U.S. newspaper industry from 2000 to 2020 that constituted the overwhelming majority of its inflation-adjusted total revenue was not being offset by digital circulation or online advertising despite almost two-thirds of U.S. advertising spending in total by 2020 being online. Also, while the FCC report noted that local television stations in the United States had become some of the largest providers of local news online, the FCC found in a 2021 working paper that inflation-adjusted advertising revenue for television stations fell nationally from 2010 to 2018. == Overview == Digital journalism flows as journalism flows and is difficult to pinpoint where it is and where it is going. In partnership with digital media, digital journalism uses facets of digital media to perform journalist tasks, for example, using the internet as a tool rather than a singular form of digital media. There is no absolute agreement as to what constitutes digital journalism. Mu Lin argues that, "Web and mobile platforms demand us to adopt a platform-free mindset for an all-inclusive production approach – create the [digital] contents first, then distribute via appropriate platforms." The repurposing of print content for an online audience is sufficient for some, while others require content created with the digital medium's unique features like hypertextuality. Fondevila Gascón adds multimedia and interactivity to complete the digital journalism essence. For Deuze, online journalism can be functionally differentiated from other kinds of journalism by its technological component which journalists have to consider when creating or displaying content. Digital journalistic work may range from purely editorial content like CNN (produced by professional journalists) online to public-connectivity websites like Slashdot (communication lacking formal barriers of entry). The difference of digital journalism from traditional journalism may be in its re-conceptualised role of the reporter in relation to audiences and news organizations. The expectations of society for instant information was important for the evolution of digital journalism. However, it is likely that the exact nature and roles of digital journalism will not be fully known for some time. Some researchers even argue that the free distribution of online content, online advertisement and the new way recipients use news could undermine the traditional business model of mass media distributors that is based on single-copy sales, subscriptions and the selling of advertisement space. == History == The first type of digital journalism, called teletext, was invented in the UK in 1970. Teletext is a system allowing viewers to choose which stories they wish to read and see it immediately. The information provided through teletext is brief and instant, similar to the information seen in digital journalism today. The information was broadcast between the frames of a television signal in what was called the vertical blanking interval or VBI. American journalist Hunter S. Thompson relied on early digital communication technology beginning by using a fax machine to report from the 1971 US presidential campaign trail as documented in his book Fear and Loathing on the Campaign Trail. After the invention of teletext was the invention of videotex, of which Prestel was the world's first system, launching commercially in 1979 with various British newspapers, such as the Financial Times lining up to deliver newspaper stories online through it. Videotex closed down in 1986 due to failing to meet end-user demand. American newspaper companies took notice of the new technology and created their own videotex systems, the largest and most ambitious being Viewtron, a service of Knight-Ridder launched in 1981. Others were Keycom in Chicago and Gateway in Los Angeles. All of them had closed by 1986. Next came computer Bulletin Board Systems. In the late 1980s and early 1990s, several smaller newspapers started online news services using BBS software and telephone modems. The first of these was the Albuquerque Tribune in 1989. Computer Gaming World in September 1992 broke the news of Electronic Arts' acquisition of Origin Systems on Prodigy, before its next issue went to press. Online news websites began to proliferate in the 1990s. An early adopter was The News & Observer in Raleigh, North Carolina which offered online news as Nando. Steve Yelvington wrote on the Poynter Institute website about Nando, owned by The N&O, by saying "Nando evolved into the first serious, professional news site on the World Wide Web". It originated in the early 1990s as "NandO Land". It is believed that a major increase in digital online journalism occurred around this time when the first commercial web browsers, Netscape Navigator (1994) and Internet Explorer (1995). By 1996, most news outlets had an online presence. Although journalistic content was repurposed from original text/video/audio sources without change in substance, it could be consumed in different ways because of its online form through toolbars, topically grouped content, and intertextual links. A twenty-four-hour news cycle and new ways of user-journalist interaction web boards were among the features unique to the digital format. Later, portals such as AOL and Yahoo! and their news aggregators (sites that collect and categorize links from news sources) led to news agencies such as The Associated Press to supplying digitally suited content for aggregation beyond the limit of what client news providers could use in the past. Also, Salon, was founded in 1995. In 2001, the American Journalism Review called Salon the Internet's "preeminent independent venue for journalism." In 2008, for the first time, more Americans reported getting their national and international news from the internet, rather than newspapers. Young people aged 18 to 29 now primarily get their news via the Internet, according to a Pew Research Center report. Audiences to news sites continued to grow due to the launch of new news sites, continued investment in news online by conventional news organizations, and the continued growth in internet audiences overall. Sixty-five percent of youth now primarily access the news online. Mainstream news sites are the most widespread form of online news media production. As of 2000, the vast majority of journalists in the Western world now use the internet regularly in their daily work. In addition to mainstream news sites, digital journalism is found in index and category sites (sites without much original content but multiple links to existing news sites), meta- and comment sites (sites about
Read more →
Blocking of Twitter in Nigeria

Twitter was blocked in Nigeria from 5 June 2021 to 13 January 2022. The government imposed a ban on the social network after it deleted tweets made by, and temporarily suspended, the Nigerian president Muhammadu Buhari, warning the southeastern people of Nigeria, predominantly Igbo people, of a potential repeat of the 1967 Nigerian Civil War due to the ongoing insurgency in Southeastern Nigeria. The Nigerian government claimed that the deletion of the president's tweets factored into their decision, but it was ultimately based on "a litany of problems with the social media platform in Nigeria, where misinformation and fake news spread through it have had real world violent consequences", citing the persistent use of the platform for activities that are capable of undermining Nigeria's corporate existence. In January 2022, Nigeria lifted its blocking of Twitter after the platform agreed to establish a legal entity within the country sometime in the first quarter of 2022. == Background == On 1 June 2021, Nigerian President Muhammadu Buhari posted a tweet threatening a crackdown on regional separatists "in the language they understand". The next day, Twitter deleted the tweet, claiming it was in violation of Twitter rules, but gave no further details. Nigeria's Information Minister Lai Mohammed said that Twitter's actions were part of an unfair double standard, as Twitter had not banned incitement tweets from other groups. During the Nigerian Civil War a majority of deaths resulted from the blockade of Biafra which caused the deaths of millions of civilians from starvation, a fact that was not alluded to in the tweet. The Nigerian government has long held concerns over the use of Twitter in the country. The ongoing local End SARS protest began on Twitter and got amplified in 2020 when it had 48 million tweets in ten days. Buhari's government floated the idea of social media regulation on different occasions prior to banning Twitter. Attempts to pass an anti-social media bill in the past have failed majorly due to massive outcry on Twitter. Days before the ban, the country's minister of information called Twitter's activities in Nigeria suspicious, citing its influence on the End SARS protests. == Aftermath == Three days after Twitter was suspended, it was reported that the move had cost the country over 6 billion naira and would also contribute to the worsening unemployment in the country. ExpressVPN reported an over 200 percent increase in web traffic and searches for VPN spiked across the country. In response, Nigeria's Minister of Justice and Attorney General of the Federation Abubakar Malami at first openly threatened to prosecute citizens who bypass the ban using a VPN but then denied saying so after a screenshot of a Twitter deactivation notification he shared on Facebook showed a VPN logo. Nigeria's cultural minister Lai Mohammed stated the ban would be lifted once Twitter submitted to locally licensing, registration and conditions. "It will be licensed by the broadcasting commission, and must agree not to allow its platform to be used by those who are promoting activities that are inimical to the corporate existence of Nigeria." In late June 2021, Twitter announced it would enter talks with the Nigerian government over the platform's suspension. The talks began in July 2021. On 15 September 2021, Mohammed said the Nigerian government will lift the ban on Twitter in a "few days." The Minister said Twitter gave a progress report of their talks with them, adding that it has been productive and quite respectful. On 1 October 2021, President Muhammadu Buhari in his Independence Day broadcast said Twitter must meet the Nigerian government's five conditions before the suspension of the social media platform will be lifted. The conditions are: Respect for national security and cohesion; registration, physical presence and representation in Nigeria; fair taxation; dispute resolution; local content. == Reactions == The ban was condemned by Amnesty International, the British, Canadian and Swedish diplomatic missions to Nigeria, as well as the United States and the European Union in a joint statement. Two domestic organizations, the Socio-Economic Rights and Accountability Project (SERAP) and the Nigerian Bar Association, indicated intent to challenge the ban in court. Twitter itself called the ban "deeply concerning". Former U.S. President Donald Trump, who was permanently suspended from Twitter following the United States Capitol attack in January, praised the ban, stating "Congratulations to the country of Nigeria, who just banned Twitter because they banned their President", and also called on other countries to ban Twitter and Facebook due to "not allowing free and open speech." == Lifting of the ban == On 12 January 2022, the Nigerian Government lifted the ban after Twitter agreed to pay an "applicable tax" and establish "a legal entity in Nigeria during the first quarter of 2022".
Read more →
List of .NET libraries and frameworks

This article contains a list of libraries that can be used in .NET languages. These languages require .NET Framework, Mono, or .NET, which provide a basis for software development, platform independence, language interoperability and extensive framework libraries. Standard Libraries (including the Base Class Library) are not included in this article. == Introduction == Apps created with .NET Framework or .NET run in a software environment known as the Common Language Runtime (CLR), an application virtual machine that provides services such as security, memory management, and exception handling. The framework includes a large class library called Framework Class Library (FCL). Thanks to the hosting virtual machine, different languages that are compliant with the .NET Common Language Infrastructure (CLI) can operate on the same kind of data structures. These languages can therefore use the FCL and other .NET libraries that are also written in one of the CLI compliant languages. When the source code of such languages are compiled, the compiler generates platform-independent code in the Common Intermediate Language (CIL, also referred to as bytecode), which is stored in CLI assemblies. When a .NET app runs, the just-in-time compiler (JIT) turns the CIL code into platform-specific machine code. To improve performance, .NET Framework also comes with the Native Image Generator (NGEN), which performs ahead-of-time compilation to machine code. This architecture provides language interoperability. Each language can use code written in other languages. Calls from one language to another are exactly the same as would be within a single programming language. If a library is written in one CLI language, it can be used in other CLI languages. Moreover, apps that consist only of pure .NET assemblies, can be transferred to any platform that contains an implementation of CLI and run on that platform. For example, apps written using .NET can run on Windows, macOS, and various versions of Linux. .NET apps or their libraries, however, may depend on native platform features, e.g. COM. As such, platform independence of .NET apps depends on the ability to transfer necessary native libraries to target platforms. In 2019, the Windows Forms and Windows Presentation Foundation portions of .NET Framework were made open source. === .NET implementations === There are four primary .NET implementations that are actively developed and maintained: .NET Framework: The original .NET implementation that has existed since 2002. While not yet discontinued, Microsoft does not plan on releasing its next major version, 5.0. Mono: A cross-platform implementation of .NET Framework by Ximian, introduced in 2004. It is free and open-source. It is now developed by Xamarin, a subsidiary of Microsoft. Universal Windows Platform (UWP): An implementation of .NET used for building UWP apps. It's designed to unify development for different targeted types of devices, including PCs, tablets, phablets, phones, and the Xbox. .NET: A cross-platform re-implementation of .NET Framework, introduced in 2016 and initially called .NET Core. It is free and open-source. .NET superseded .NET Framework with the release of .NET 5. Each implementation of .NET includes the following components: One or more runtime environments, e.g. Common Language Runtime (CLR) for .NET Framework and CoreCLR for .NET A class library The .NET Standard is a set of common APIs that are implemented in the Base Class Library of any .NET implementation. The class library of each implementation must implement the .NET Standard, but may also implement additional APIs. Traditionally, .NET apps targeted a certain version of a .NET implementation, e.g. .NET Framework 4.6. Starting with the .NET Standard, an app can target a version of the .NET Standard and then it could be used (without recompiling) by any implementation that supports that level of the standard. This enables portability across different .NET implementations. The following table lists the .NET implementations that adhere to the .NET Standard and the version number at which each implementation became compliant with a given version of .NET Standard. For example, according to this table, .NET Core 3.0 was the first version of .NET Core that adhered to .NET Standard 2.1. This means that any version of .NET Core bigger than 3.0 (e.g. .NET Core 3.1) also adheres to .NET Standard 2.1. == Web frameworks == === ASP.NET === First released in 2002, ASP.NET is an open-source server-side web application framework designed for web development to produce dynamic web pages. It is the successor to Microsoft's Active Server Pages (ASP) technology, built on the Common Language Runtime (CLR). === ASP.NET Core === ASP.NET was completely rewritten in 2016 as a modular web framework, together with other frameworks like Entity Framework. The re-written framework uses the new open-source .NET Compiler Platform (also known by its codename "Roslyn") and is cross platform. The programming models ASP.NET MVC, ASP.NET Web API, and ASP.NET Web Pages (a model using only Razor pages) were merged into a unified MVC 6. === Blazor === Blazor is a free and open-source web framework that enables developers to create Single-page Web apps using C# and HTML in ASP.NET Razor pages ("components"). Blazor is part of the ASP.NET Core framework. Blazor Server apps are hosted on a web server, while Blazor WebAssembly apps are downloaded to the client's web browser before running. In addition, a Blazor Hybrid framework is available with server-based and client-based application components. == Numerical libraries == === Open-source numerical libraries === ==== AForge.NET ==== This is a computer vision and artificial intelligence library. It implements a number of genetic, fuzzy logic and machine learning algorithms with several architectures of artificial neural networks with corresponding training algorithms. ==== ALGLIB ==== This is a cross-platform open source numerical analysis and data processing library. It consists of algorithm collections written in different programming languages (C++, C#, FreePascal, Delphi, VBA) and has dual licensing – commercial and GPL. ==== Math.NET Numerics ==== This library aims to provide methods and algorithms for numerical computations in science, engineering and everyday use. Covered topics include special functions, linear algebra, probability models, random numbers, interpolation, integral transforms and more. MIT/X11 license. ==== Meta.Numerics ==== This is a library for advanced scientific computation in the .NET Framework. ==== ML.NET ==== This is a free software machine learning library. The preview release of ML.NET included transforms for feature engineering like n-gram creation, and learners to handle binary classification, multi-class classification, and regression tasks. Additional ML tasks like anomaly detection and recommendation systems have since been added, and other approaches like deep learning will be included in future versions. === Proprietary numerical libraries === ==== ILNumerics.Net ==== This is a high performance, typesafe numerical array set of classes and functions for general math, FFT and linear algebra. The library, developed for .NET/Mono, aims to provide 32- and 64-bit script-like syntax in C#, 2D & 3D plot controls, and efficient memory management. It is released under GPLv3 or commercial license. ==== Measurement Studio ==== This is an integrated suite of UI controls and class libraries for use in developing test and measurement applications. The analysis class libraries provide various digital signal processing, signal filtering, signal generation, peak detection, and other general mathematical functionality. ==== NMath ==== This is a numerical component library for the .NET platform developed by CenterSpace Software. It includes signal processing (FFT) classes, a linear algebra (LAPACK & BLAS) framework, and a statistics package. == 3D graphics == === Open-source 3D graphics === ==== Open Toolkit (OpenTK) ==== This is a low-level C# binding for OpenGL, OpenGL ES and OpenAL. It runs on Windows, Linux, Mac OS X, BSD, Android and iOS. It can be used standalone or integrated into a GUI. ==== Windows Presentation Foundation (WPF) ==== This is a graphical subsystem for rendering user interfaces, developed by Microsoft. It also contains a 3D rendering engine. In addition, interactive 2D content can be overlaid on 3D surfaces natively. It only runs on Windows operating systems. === Proprietary 3D graphics === ==== Unity ==== This is a cross-platform game engine developed by Unity Technologies and used to develop video games for PC, consoles, mobile devices and websites. == Image processing == === AForge.NET === This is a computer vision and artificial intelligence library. It implements a number of image processing algorithms and filters. It is released under the LGPLv3 and partly GPLv3 license. Majority of the library is written in C# and th
Read more →
Raseef22

Raseef22 (Arabic: رصيف22) is a liberal Arabic media network founded in 2013 based in Beirut, Lebanon. It publishes content in Arabic and English from different Arab states and describes itself as an independent media platform. International Media Support mentions Raseef22 along with HuffPost Arabic and Al Jazeera as one of the biggest Pan-Arab online platforms. == Name == The Arabic word raseef (رَصِيف) means platform or pavement, and the number 22 refers to the number of states in the Arab League. == History == Kareem Sakka co-founded Raseef22 in the aftermath of the Arab Spring, which he cites as a source of inspiration. In an article in The Washington Post, he wrote that Raseef22 was created as a "digital space for those eager to know what was going on around them." Raseef22 was one of the 500 websites censored in Egypt in late 2017 after it published an article on Egyptian security agencies' vies to influence the media. After the site was blocked in Egypt, it was targeted in a cyber attack that took it offline in locations around the world. Jamal Khashoggi wrote for Raseef22 regularly. One of his notable articles was "Notes on the Freedom of the Arabs from Oslo, Norway," published June 5, 2018. The site was blocked in Saudi Arabia December 2018 when the Saudi Ministry of Communications and Information Technology ordered its censorship due to its "unprecedented response to the assassination of Jamal Khashoggi in Istanbul." This decision might have also been related to Raseef22's coverage of Saudi-Israeli relations and interviews with activists later imprisoned or placed under house arrest coverage In 2019 the Association of LGBT Journalists (AJL) in Paris gave Raseef22 a golden foreign press award for its six-month series of articles on gender and sexuality issues. == Readership == According to its publisher in 2019, the news agency counted 12 million readers annually from 22 Arab nations. Of the readership, he wrote that it "believes in the talent and promise of the Arab mind and sees the ugliness of tyranny, patriarchy, misogyny and the futility of proxy rulers and wars." Al-Quds Al-Arabi described Raseef22 as "oriented to the youth."
Read more →
Economía Feminista

Economía Feminista, in English: Feminist Economics, is an Argentine digital media, focused on disclosure and creation of economics information about the gender gap. The media is managed by Mercedes D`Alessandro, Magalí Brosio, Violeta Guitart and Agurtzane Urrutia. == Concept == Economía Femini(s)ta, is a portmanteau of feminista and minita. It attempts to end stereotypes about women. It was created in 2015 and its goal is to be a source of economic data to help to display economic differences by gender, especially in Argentina. == Awards == Economía Feminista was awarded the Lola Mora prize in 2016 for the best digital media by Dirección General de la Mujer, promoted by Buenos Aires city's Legislature.
Read more →
NexDock

NexDock is a series of lapdock devices (containing a laptop screen, keyboard, trackpad, and battery connected to a phone or other device) sold by Nex Computer LLC. The product can be used with mobile desktop environments, including Samsung DeX and the former Windows Continuum. Critical reception for the series has been mixed, with reviewers praising the concept's utility for mobile productivity while noting hardware limitations and its niche appeal. == History == The first NexDock was introduced in 2016 through a successful Indiegogo campaign. Its development coincided with interest in smartphone-powered desktop interfaces, and it was marketed as a companion for Windows 10 Mobile's Continuum feature. Subsequent models, often launched via Kickstarter, added features like higher-resolution displays, touchscreens, and convertible hinges to adapt to the growing capabilities of smartphones. == Models == === NexDock (Original, 2016) === The first model featured a 14.1-inch 1366x768 display and connected primarily via a mini HDMI port. === NexDock 2 (2019) === This model introduced a 13.3-inch 1080p IPS display and a USB-C port, improvements aimed at better supporting platforms like Samsung DeX. === NexDock Touch (2020) === A touchscreen was added to the 13.3-inch display, allowing for more direct interaction with the connected device's operating system. === NexDock 360 (2021) === This version incorporated a 360-degree hinge, allowing the device to be used in laptop, tablet, tent, or stand modes. === NexDock Wireless (2023) === Wireless display connectivity was the key feature of this model, offering a cable-free connection to compatible phones and computers. === NexDock XL (2023) === The screen size was increased to 15.6 inches. It retained the 360-degree hinge and also offered a version with wireless charging for a connected phone. == Reception == Reviews of NexDock products have been mixed, generally praising the concept while pointing out execution flaws. The devices are often lauded for their utility with Samsung DeX, turning a high-end Samsung phone into a viable portable workstation. A review of the NexDock 2 from ZDNet concluded it was a "great companion for the modern road warrior," and Digital Trends called the original a "no-brainer shell" for expanding a phone's capability. However, reviewers have consistently highlighted hardware limitations. In its review of the NexDock Touch, TechRadar stated that while it was a "compelling package for a very specific niche," the "trackpad and keyboard are a bit of a letdown and the screen could be brighter." This sentiment was echoed in other reviews, with criticism often aimed at the trackpad's performance and feel. A review of the NexDock 2 from Android Authority described the experience as being "janky at times," concluding that the device "delivers on its promise — sort of." A common point across many reviews is that the overall performance is entirely dependent on the power of the connected phone, and the experience is often best suited for light productivity tasks rather than replacing a dedicated laptop.
Read more →
Image formation

The study of image formation encompasses the radiometric and geometric processes by which 2D images of 3D objects are formed. In the case of digital images, the image formation process also includes analog to digital conversion and sampling. == Imaging == The imaging process is a mapping of an object to an image plane. Each point on the image corresponds to a point on the object. An illuminated object will scatter light toward a lens and the lens will collect and focus the light to create the image. The ratio of the height of the image to the height of the object is the magnification. The spatial extent of the image surface and the focal length of the lens determines the field of view of the lens. Image formation of mirror these have a center of curvature and its focal length of the mirror is half of the center of curvature. == Illumination == An object may be illuminated by the light from an emitting source such as the sun, a light bulb or a Light Emitting Diode. The light incident on the object is reflected in a manner dependent on the surface properties of the object. For rough surfaces, the reflected light is scattered in a manner described by the Bi-directional Reflectance Distribution Function (BRDF) of the surface. The BRDF of a surface is the ratio of the exiting power per square meter per steradian (radiance) to the incident power per square meter (irradiance). The BRDF typically varies with angle and may vary with wavelength, but a specific important case is a surface that has constant BRDF. This surface type is referred to as Lambertian and the magnitude of the BRDF is R/π, where R is the reflectivity of the surface. The portion of scattered light that propagates toward the lens is collected by the entrance pupil of the imaging lens over the field of view. == Field of view and imagery == The Field of view of a lens is limited by the size of the image plane and the focal length of the lens. The relationship between a location on the image and a location on the object is y = ftan(θ), where y is the max extent of the image plane, f is the focal length of the lens and θ is the field of view. If y is the max radial size of the image then θ is the field of view of the lens. While the image created by a lens is continuous, it can be modeled as a set of discrete field points, each representing a point on the object. The quality of the image is limited by the aberrations in the lens and the diffraction created by the finite aperture stop. == Pupils and stops == The aperture stop of a lens is a mechanical aperture which limits the light collection for each field point. The entrance pupil is the image of the aperture stop created by the optical elements on the object side of the lens. The light scattered by an object is collected by the entrance pupil and focused onto the image plane via a series of refractive elements. The cone of the focused light at the image plane is set by the size of the entrance pupil and the focal length of the lens. This is often referred to as the f-stop or f-number of the lens. f/# = f/D where D is the diameter of the entrance pupil. == Pixelation and color vs. monochrome == In typical digital imaging systems, a sensor is placed at the image plane. The light is focused on to the sensor and the continuous image is pixelated. The light incident on each pixel in the sensor will be integrated within the pixel and a proportional electronic signal will be generated. The angular geometric resolution of a pixel is given by atan(p/f), where p is the pitch of the pixel. This is also called the pixel field of view. The sensor may be monochrome or color. In the case of a monochrome sensor, the light incident on each pixel is integrated and the resulting image is a grayscale like picture. For color images, a mosaic color filter is typically placed over the pixels to create a color image. An example is a Bayer filter. The signal incident on each pixel is then digitized to a bit stream. == Image quality == The quality of an image is dependent upon both geometric and physical items. Geometrically, higher density of pixels across an image will give less blocky pixelation and thus a better geometric image quality. Lens aberrations also contribute to the quality of the image. Physically, diffraction due to the aperture stop will limit the resolvable spatial frequencies as a function of f-number. In the frequency domain, Modulation Transfer Function (MTF) is a measure of the quality of the imaging system. The MTF is a measure of the visibility of a sinusoidal variation in irradiance on the image plane as a function of the frequency of the sinusoid. It includes the effects of diffraction, aberrations and pixelation. For the lens, the MTF is the autocorrelation of the pupil function, so it accounts for the finite pupil extent and the lens aberrations. The sensor MTF is the Fourier Transform of the pixel geometry. For a square pixel, MTF(ξ) = sin(πξp)/πξp where p is the pixel width and ξ is the spatial frequency. The MTF of the combination of the lens and detector is the product of the two component MTFs. == Perception == Color images can be perceived via two means. In the case of computer vision the light incident on the sensor comprises the image. In the case of visual perception, the human eye has a color dependent response to light so this must be accounted for. This is important consideration when converting to grayscale. == Image formation in eye == The principal difference between the lens of the eye and an ordinary optical lens is that the former is flexible. The radius of the curvature of the anterior surface of the lens is greater than the radius of its posterior surface. The shape of the lens is controlled by tension in the fibers of the ciliary body. To focus on distant objects, the controlling muscles cause the lens to be relatively flattened. Similarly, these muscles allow the lens to become thicker in order to focus on objects near the eye. The distance between the center of the lens and the retina (focal length) varies from approximately 17 mm to about 14 mm, as the refractive power of the lens increases from its minimum to its maximum. When the eye focuses on an object farther away than about 3 m, the lens exhibits its lowest refractive power. When the eye focuses on a close object, the lens is most strongly refractive.
Read more →
G7 Rapid Response Mechanism

The G7 Rapid Response Mechanism (RRM) is an initiative introduced in the "Charlevoix Commitment on Defending Democracy from Foreign Threats", issued by the leaders of the Group of Seven (G7) countries—United States, Canada, Japan, United Kingdom, France, Germany and Italy—on June 9, 2018, during their summit in Charlevoix, Quebec. The RRM's mandate is to strengthen the coordination of G7 member countries, as well as "to identify and respond to diverse and evolving threats to our democracies, including through sharing information and analysis, and identifying opportunities for coordinated response" The G7 is an informal international intergovernmental economic organization that meets annually, whose members represent the seven wealthiest advanced economies in the world, as measured by the International Monetary Fund (IMF). == Constituents == The following countries and organisations are members and observers (associate members) of the G7 Rapid Response Mechanism: Australia Canada France Germany Italy Japan Netherlands New Zealand Poland Sweden United Kingdom United States European Union North Atlantic Treaty Organization == Mandate == The RRM was mandated to "strengthen coordination to prevent, thwart and respond to malign and evolving threats to G7 democracies." It "will share information and threat analysis related to various threats to democracy, and is an established mechanism to identify opportunities for coordinated response." According to the Institute for Research on Public Policy's Policy Options magazine, the "RRM initiative seeks to strengthen the leading democracies' coordination to identify and respond to diverse and evolving threats…including through sharing information and analysis, and identifying opportunities for a coordinated response." == Administration == The RRM initiative is led by Canada through Global Affairs Canada's Centre for International Digital Policy. Tara Denham, Director of the Centre for International Digital Policy at Global Affairs Canada, directed the team responsible for setting up the RRM Coordination Unit. Global Affairs Canada—the Department of Foreign Affairs, Trade and Development—is the federal Canadian ministry responsible for diplomatic and consular relations, international trade, and international development and humanitarian assistance. The Centre for International Digital Policy includes the Digital Inclusion Lab and the RRM. Denham is also the RRM's Canadian Focal Point. At a briefing on "the security and intelligence threats to elections" of the House of Commons Standing Committee on Access to Information, Privacy and Ethics, the chair Bob Zimmer (CPC), said that the 2019 general election "may be different" from past elections in Canada. as the "tools that were used to strengthen civic engagement are being used to undermine, disrupt and destabilize democracy." "Democracies around the world have entered a new era—an era of heightened threat and heightened vigilance—and 2019 will see a number of countries brace for volleys of attempted disruption: India, Australia, Ukraine, Switzerland, Belgium, the EU and, of course, Canada. Evidence has confirmed that the most recent Canadian general election, in 2015, was unencumbered by interference, although there were some relatively primitive attempts to disrupt, misinform and divide. These efforts were few in number and uncoordinated, and had no visible impact on the voter, either online or in line." Zimmer described the initiative's three pillars. "enhancing citizen preparedness" through the "digital citizen initiative" "improving organizational readiness" with national security and intelligence agencies supporting Elections Canada "ensure a comprehensive understanding of and response to any threats to Canada's democratic process." by establishing the Security and Intelligence Threats to Elections Task Force (SITE) which works as a team with the Communications Security Establishment (CSE), the Canadian Security Intelligence Service (CSIS), the Royal Canadian Mounted Police (RCMP), as well as Global Affairs Canada Zimmer said that as part of the third pillar, "We have activated the G7 rapid response mechanism, announced at the G7 leaders' summit in Charlevoix, to strengthen coordination among our G7 allies and to ensure that there is international collaboration and coordination in responding to foreign threats to democracy." == Background == === Charlevoix summit === The G7 met from June 8 to 9, 2018 during their summit at the Manoir Richelieu in Charlevoix, in La Malbaie, Quebec. The Charlevoix Summit was the 44th G7 summit. The group issued eight "Commitments" at the summit. They included: Commitment on Defending Democracy from Foreign Threats Commitment on Equality and Economic Growth Commitment to End Sexual and Gender-Based Violence, Abuse and Harassment in Digital Contexts Declaration on Quality Education for Girls, Adolescent Girls and Women in Developing Countries Commitment on Innovative Financing for Development. Prime Minister Justin Trudeau announced five themes for Canada's G7 presidency which began in January 2018. === Defending Democracy from Foreign Threats === "We commit to take concerted action in responding to foreign actors who seek to undermine our democratic societies and institutions, our electoral processes, our sovereignty and our security as outlined in the Charlevoix Commitment on Defending Democracy from Foreign Threats. We recognize that such threats, particularly those originating from state actors, are not just threats to G7 nations, but to international peace and security and the rules-based international order. We call on others to join us in addressing these growing threats by increasing the resilience and security of our institutions, economies and societies, and by taking concerted action to identify and hold to account those who would do us harm." They committed to "cooperate in defending democracies from foreign threats and establish a response mechanism for that purpose". "Democracy and the rules-based international order are increasingly being challenged by authoritarianism and the defiance of international norms. In particular, foreign actors seek to undermine our democratic societies and institutions, our electoral processes, our sovereignty and our security. These malicious, multi-faceted and ever-evolving tactics constitute a serious strategic threat which we commit to confront together, working with other governments that share our democratic values." The Charlevoix Commitment states that "foreign actors seek to undermine our democratic societies and institutions, our electoral processes, our sovereignty and our security. These malicious, multi-faceted and ever-evolving tactics constitute a serious strategic threat which we commit to confront together, working together with other governments that share our democratic values." The Charlevoix Summit resolved to "establish a G7 Rapid Response Mechanism to strengthen our coordination to identify and respond to diverse and evolving threats to our democracies, including through sharing information and analysis, and identifying opportunities for coordinated response." == Monitored elections == === 2019 European Parliament election === RRM Canada's comprehensive report on the 2019 European Parliament election analyzed open data "related to foreign interference during and leading up to the 2019 European Union Parliamentary Elections, May 23–26, 2019". RRM Canada did not find "significant evidence of state-based foreign interference, or any large-scale, organized and coordinated efforts by non-state actors". They did find that "national or international non-state actors" used tactics based on those used by the Russian sponsored Internet Research Agency (IRA) in previous elections, "such as the 2016 U.S. Elections". For example, blogs, webpages, and social media accounts on Twitter, Facebook and Reddit "were used to spread divisive and false information to damage and negatively impact social cohesion and trust in democratic processes and institutions" in coordinated networks of Facebook groups. === 2019 Alberta general election === RRM Canada's analyz report on the 2019 Alberta general election was intended to "identify any emerging tactics in foreign interference and draw lessons learned for the Canadian general elections scheduled to take place in October 2019." No foreign activity was detected, although the data revealed ""suspicious account creation pattern that is indicative of troll or bot activity". They found "automated inauthentic behaviour and trolling activities" but concluded that they were "very likely domestic". The data showed "suspicious account creation pattern that is indicative of troll or bot activity", and "spikes in account creation" which suggested the "presence of accounts developed for a specific purpose." The accounts were very likely domestic and were "mainly comprised of supporters of the United Conservative Party (UCP)." A seco
Read more →
Mixvoip

Mixvoip S.A. is a Luxembourg-based telecommunications service provider founded in 2008. The company offers IP telephony, high-speed Internet connectivity, and IT solutions to businesses and individuals. == Company history == In November 2017, Mixvoip expanded its operations to Belgium and Germany. At the beginning of 2019, the company acquired the telecommunications provider Voipgate. In December 2019, Mixvoip was named Telecom Company of the Year at the Luxembourg ICT Awards 2019 organized by Farvest and IT One. A 2024 article in Duke described the company's transition during the 2010s from traditional telephony services to cloud-based communication platforms. In the end of 2024, the ILR published the statistics about electronic communications in Luxembourg, including Mixvoip in the fix telephony section. In July 2025, Mixvoip acquired Crossing Telecom. In 2026, Mixvoip acquired Nomado's portfolio.
Read more →