AI Generator Reader

AI Generator Reader — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Security.txt

  security.txt is an accepted standard for website security information that allows security researchers to report security vulnerabilities easily. The standard prescribes a text file named security.txt in the well known location, similar in syntax to robots.txt but intended to be machine and human readable, for those wishing to contact a website's owner about security issues. security.txt files have been adopted by Google, GitHub, LinkedIn, and Facebook. == History == The Internet Draft was first submitted by Edwin Foudil in September 2017. At that time it covered four directives, "Contact", "Encryption", "Disclosure" and "Acknowledgement". Foudil expected to add further directives based on feedback. In addition, web security expert Scott Helme said he had seen positive feedback from the security community while use among the top 1 million websites was "as low as expected right now". In 2019, the Cybersecurity and Infrastructure Security Agency (CISA) published a draft binding operational directive that requires all US federal agencies to publish a security.txt file within 180 days. The Internet Engineering Steering Group (IESG) issued a Last Call for security.txt in December 2019 which ended on January 6, 2020. A study in 2021 found that over ten percent of top-100 websites published a security.txt file, with the percentage of sites publishing the file decreasing as more websites were considered. The study also noted a number of discrepancies between the standard and the content of the file. In April 2022 the security.txt file has been accepted by Internet Engineering Task Force (IETF) as RFC 9116. == File format == security.txt files can be served under the /.well-known/ directory (i.e. /.well-known/security.txt) or the top-level directory (i.e. /security.txt) of a website. The file must be served over HTTPS and in plaintext format.

  Read more →
• 

  Fully probabilistic design

  Decision making (DM) can be seen as a purposeful choice of action sequences. It also covers control, a purposeful choice of input sequences. As a rule, it runs under randomness, uncertainty and incomplete knowledge. A range of prescriptive theories have been proposed how to make optimal decisions under these conditions. They optimise sequence of decision rules, mappings of the available knowledge on possible actions. This sequence is called strategy or policy. Among various theories, Bayesian DM is broadly accepted axiomatically based theory that solves the design of optimal decision strategy. It describes random, uncertain or incompletely known quantities as random variables, i.e. by their joint probability expressing belief in their possible values. The strategy that minimises expected loss (or equivalently maximises expected reward) expressing decision-maker's goals is then taken as the optimal strategy. While the probabilistic description of beliefs is uniquely and deductively driven by rules for joint probabilities, the composition and decomposition of the loss function have no such universally applicable formal machinery. Fully probabilistic design (of decision strategies or control, FPD) removes the mentioned drawback and expresses also the DM goals of by the "ideal" probability, which assigns high (small) values to desired (undesired) behaviours of the closed DM loop formed by the influenced world part and by the used strategy. FPD has axiomatic basis and has Bayesian DM as its restricted subpart. FPD has a range of theoretical consequences , and, importantly, has been successfully used to quite diverse application domains.

  Read more →
• 

  Acoustic model

  An acoustic model is used in automatic speech recognition to represent the relationship between an audio signal and the phonemes or other linguistic units that make up speech. The model is learned from a set of audio recordings and their corresponding transcripts. It is created by taking audio recordings of speech, and their text transcriptions, and using software to create statistical representations of the sounds that make up each word. == Background == Modern speech recognition systems use both an acoustic model and a language model to represent the statistical properties of speech. The acoustic model models the relationship between the audio signal and the phonetic units in the language. The language model is responsible for modeling the word sequences in the language. These two models are combined to get the top-ranked word sequences corresponding to a given audio segment. Most modern speech recognition systems operate on the audio in small chunks known as frames with an approximate duration of 10ms per frame. The raw audio signal from each frame can be transformed by applying the mel-frequency cepstrum. The coefficients from this transformation are commonly known as mel-frequency cepstral coefficients (MFCCs) and are used as an input to the acoustic model along with other features. Recently, the use of convolutional neural networks has led to major improvements in acoustic modeling. == Speech audio characteristics == Audio can be encoded at different sampling rates (i.e. samples per second – the most common being: 8, 16, 32, 44.1, 48, and 96 kHz), and different bits per sample (the most common being: 8-bits, 16-bits, 24-bits or 32-bits). Speech recognition engines work best if the acoustic model they use was trained with speech audio which was recorded at the same sampling rate/bits per sample as the speech being recognized. == Telephony-based speech recognition == The limiting factor for telephony based speech recognition is the bandwidth at which speech can be transmitted. For example, a standard land-line telephone only has a bandwidth of 64 kbit/s at a sampling rate of 8 kHz and 8-bits per sample (8000 samples per second 8-bits per sample = 64000 bit/s). Therefore, for telephony based speech recognition, acoustic models should be trained with 8 kHz/8-bit speech audio files. In the case of voice over IP, the codec determines the sampling rate/bits per sample of speech transmission. Codecs with a higher sampling rate/bits per sample for speech transmission (which improve the sound quality) necessitate acoustic models trained with audio data that matches that sampling rate/bits per sample. == Desktop-based speech recognition == For speech recognition on a standard desktop PC, the limiting factor is the sound card. Most sound cards today can record at sampling rates of between 16–48 kHz of audio, with bit rates of 8- to 16-bits per sample, and playback at up to 96 kHz. As a general rule, a speech recognition engine works better with acoustic models trained with speech audio data recorded at higher sampling rates/bits per sample. But using audio with too high a sampling rate/bits per sample can slow the recognition engine down. A compromise is needed. Thus for desktop speech recognition, the current standard is acoustic models trained with speech audio data recorded at sampling rates of 16 kHz/16 bits per sample.

  Read more →
• 

  Shadow and highlight enhancement

  Shadow and highlight enhancement refers to an image processing technique used to correct exposure. The use of this technique has been gaining popularity, making its way onto magazine covers, digital media, and photos. It is, however, considered by some to be akin to other destructive Photoshop filters, such as the Watercolor filter, or the Mosaic filter. == Shadow recovery == A conservative application of the shadow/highlight tool can be very useful in recovering shadows, though it tends to leave a telltale halo around the boundary between highlight and shadow if used incorrectly. A way to avoid this is to use the bracketing technique, although this usually requires a tripod. == Highlight recovery == Recovering highlights with this tool, however, has mixed results, especially when using it on images with skin in them, and often makes people look like they have been "sprayed with fake tan". == Shadow brightening - manual == One way to brighten shadows in image editing software such as GIMP or Adobe Photoshop is to duplicate the background layer, invert the copy and set the blend modes of that top layer to "Soft Light". You can also use an inverted black and white copy of the image as a mask on a brightening layer, such as Curves or Levels. == Shadow brightening - automatic == Several automatic computer image processing-based shadow recovery and dynamic range compression methods can yield a similar effect. Some of these methods include the retinex method and homomorphic range compression. The retinex method is based on work from 1963 by Edwin Land, the founder of Polaroid. Shadow enhancement can also be accomplished using adaptive image processing algorithms such as adaptive histogram equalization or contrast limiting adaptive histogram equalization (CLAHE).

  Read more →
• 

  Transcription software

  Transcription software assists in the conversion of human speech into a text transcript. Audio or video files can be transcribed manually or automatically. Transcriptionists can replay a recording several times in a transcription editor and type what they hear. By using transcription hot keys, the manual transcription can be accelerated, the sound filtered, equalized or have the tempo adjusted when the clarity is not great. With speech recognition technology, transcriptionists can automatically convert recordings to text transcripts by opening recordings in a PC and uploading them to a cloud for automatic transcription, or transcribe recordings in real-time by using digital dictation. Depending on quality of recordings, machine generated transcripts may still need to be manually verified. The accuracy rate of the automatic transcription depends on several factors such as background noises, speakers' distance to the microphone, and accents. Transcription software, as with transcription services, is often used for business, legal, or medical purposes. Compared with audio content, a text transcript is searchable, takes up less computer memory, and can be used as an alternate method of communication, such as for subtitles and closed captions. Some clinical environments also use digital tools to support transcription workflows, including ambient documentation systems that employ Speech recognition to capture portions of clinical encounters and generate draft notes for later review. These tools are typically used alongside conventional transcription methods. The definition of transcription "software", as compared with transcription "service", is that the former is sufficiently automated that a user can run the entire system without engaging outside personnel. New software-as-a-service and cloud computing models use artificial intelligence, machine learning and natural language processing to convert speech to text and continuously learn new phrases and accents. AI transcription can, however, lead to hallucinations and other errors. == Development == Research at Google released a free android app Google Live Transcribe, it runs on Google Cloud. Google Chrome developed and has an available built in English Live Caption. Google Docs, Google Translate, Google Assistant, GBoard Google Text to Speech engine support transcription tool too. OpenAI launched Whisper, an open-source speech recognition deep learning model in September 2022. In 2024, an AI-powered transcription platform, Transkriptor, was launched, enabling the automatic conversion of audio and video recordings into text using speech recognition technology, with support for transcription in 100 languages and processing of content uploaded via a web interface as well as mobile and browser extensions. It is part of the Tor.app suite of AI-based language processing tools.

  Read more →
• 

  Super-resolution optical fluctuation imaging

  Super-resolution optical fluctuation imaging (SOFI) is a post-processing method for the calculation of super-resolved images from recorded image time series that is based on the temporal correlations of independently fluctuating fluorescent emitters. SOFI has been developed for super-resolution of biological specimen that are labelled with independently fluctuating fluorescent emitters (organic dyes, fluorescent proteins). In comparison to other super-resolution microscopy techniques such as STORM or PALM that rely on single-molecule localization and hence only allow one active molecule per diffraction-limited area (DLA) and timepoint, SOFI does not necessitate a controlled photoswitching and/ or photoactivation as well as long imaging times. Nevertheless, it still requires fluorophores that are cycling through two distinguishable states, either real on-/off-states or states with different fluorescence intensities. In mathematical terms SOFI-imaging relies on the calculation of cumulants, for what two distinguishable ways exist. For one thing an image can be calculated via auto-cumulants that by definition only rely on the information of each pixel itself, and for another thing an improved method utilizes the information of different pixels via the calculation of cross-cumulants. Both methods can increase the final image resolution significantly although the cumulant calculation has its limitations. Actually SOFI is able to increase the resolution in all three dimensions. == Principle == Likewise to other super-resolution methods SOFI is based on recording an image time series on a CCD- or CMOS camera. In contrary to other methods the recorded time series can be substantially shorter, since a precise localization of emitters is not required and therefore a larger quantity of activated fluorophores per diffraction-limited area is allowed. The pixel values of a SOFI-image of the n-th order are calculated from the values of the pixel time series in the form of a n-th order cumulant, whereas the final value assigned to a pixel can be imagined as the integral over a correlation function. The finally assigned pixel value intensities are a measure of the brightness and correlation of the fluorescence signal. Mathematically, the n-th order cumulant is related to the n-th order correlation function, but exhibits some advantages concerning the resulting resolution of the image. Since in SOFI several emitters per DLA are allowed, the photon count at each pixel results from the superposition of the signals of all activated nearby emitters. The cumulant calculation now filters the signal and leaves only highly correlated fluctuations. This provides a contrast enhancement and therefore a background reduction for good measure. As it is implied in the figure on the left the fluorescence source distribution: ∑ k = 1 N δ ( r → − r → k ) ⋅ ε k ⋅ s k ( t ) {\displaystyle \sum _{k=1}^{N}\delta ({\vec {r}}-{\vec {r}}_{k})\cdot \varepsilon _{k}\cdot s_{k}(t)} is convolved with the system's point spread function (PSF) U(r). Hence the fluorescence signal at time t and position r → {\displaystyle {\vec {r}}} is given by F ( r → , t ) = ∑ k = 1 N U ( r → − r → k ) ⋅ ε k ⋅ s k ( t ) . {\displaystyle F({\vec {r}},t)=\sum _{k=1}^{N}U({\vec {r}}-{\vec {r}}_{k})\cdot \varepsilon _{k}\cdot s_{k}(t).} Within the above equations N is the amount of emitters, located at the positions r → k {\displaystyle {\vec {r}}_{k}} with a time-dependent molecular brightness ε k ⋅ s k {\displaystyle \varepsilon _{k}\cdot s_{k}} where ε k {\displaystyle \varepsilon _{k}} is a variable for the constant molecular brightness and s k ( t ) {\displaystyle s_{k}(t)} is a time-dependent fluctuation function. The molecular brightness is just the average fluorescence count-rate divided by the number of molecules within a specific region. For simplification it has to be assumed that the sample is in a stationary equilibrium and therefore the fluorescence signal can be expressed as a zero-mean fluctuation: δ F ( r → , t ) = F ( r → , t ) − ⟨ F ( r → , t ) ⟩ t {\displaystyle \delta F({\vec {r}},t)=F({\vec {r}},t)-\langle F({\vec {r}},t)\rangle _{t}} where ⟨ ⋯ ⟩ t {\displaystyle \langle \cdots \rangle _{t}} denotes time-averaging. The auto-correlation here e.g. the second-order can then be described deductively as follows for a certain time-lag τ {\displaystyle \tau } : δ F ( r → , t ) = ⟨ δ F ( r → , t + τ ) ⋅ δ F ( r → , t ) ⟩ t {\displaystyle \delta F({\vec {r}},t)=\langle \delta F({\vec {r}},t+\tau )\cdot \delta F({\vec {r}},t)\rangle _{t}} From these equations it follows that the PSF of the optical system has to be taken to the power of the order of the correlation. Thus in a second-order correlation the PSF would be reduced along all dimensions by a factor of 2 {\displaystyle {\sqrt {2}}} . As a result, the resolution of the SOFI-images increases according to this factor. === Cumulants versus correlations === Using only the simple correlation function for a reassignment of pixel values, would ascribe to the independency of fluctuations of the emitters in time in a way that no cross-correlation terms would contribute to the new pixel value. Calculations of higher-order correlation functions would suffer from lower-order correlations for what reason it is superior to calculate cumulants, since all lower-order correlation terms vanish. == Cumulant-calculation == === Auto-cumulants === For computational reasons it is convenient to set all time-lags in higher-order cumulants to zero so that a general expression for the n-th order auto-cumulant can be found: A C n ( r → , τ 1 … n − 1 = 0 ) = ∑ k = 1 N U n ( r → − r → k ) ε k n w k ( 0 ) {\displaystyle AC_{n}({\vec {r}},\tau _{1\ldots n-1}=0)=\sum _{k=1}^{N}U^{n}({\vec {r}}-{\vec {r}}_{k})\varepsilon _{k}^{n}w_{k}(0)} w k {\displaystyle w_{k}} is a specific correlation based weighting function influenced by the order of the cumulant and mainly depending on the fluctuation properties of the emitters. Albeit there is no fundamental limitation in calculating very high orders of cumulants and thereby shrinking the FWHM of the PSF there are practical limitations according to the weighting of the values assigned to the final image. Emitters with a higher molecular brightness will show a strong increase in terms of the pixel cumulant value assigned at higher-orders as well as this performance can be expected from a diverse appearance of fluctuations of different emitters. A wide intensity range of the resulting image can therefore be expected and as a result dim emitters can get masked by bright emitters in higher-order images:. The calculation of auto-cumulants can be realized in a very attractive way in a mathematical sense. The n-th order cumulant can be calculated with a basic recursion from moments K n ( r → ) = μ n ( r → ) − ∑ i = 1 n − 1 ( n − 1 i ) K n − i ( r → ) μ i ( r → ) {\displaystyle K_{n}({\vec {r}})=\mu _{n}({\vec {r}})-\sum _{i=1}^{n-1}{\begin{pmatrix}n-1\\i\end{pmatrix}}K_{n-i}({\vec {r}})\mu _{i}({\vec {r}})} where K is a cumulant of the index's order, likewise μ {\displaystyle \mu } represents the moments. The term within the brackets indicates a binomial coefficient. This way of computation is straightforward in comparison with calculating cumulants with standard formulas. It allows for the calculation of cumulants with only little time of computing and is, as it is well implemented, even suitable for the calculation of high-order cumulants on large images. === Cross-cumulants === In a more advanced approach cross-cumulants are calculated by taking the information of several pixels into account. Cross-cumulants can be described as follows: C C n ( r → , τ 1 … n − 1 = 0 ) = ∏ j < l n U ( r → j − r → l n ) ⋅ ∑ i = 1 N U n ( r → i − ∑ k n r → k n ) ε i n w i ( 0 ) {\displaystyle CC_{n}({\vec {r}},\tau _{1\ldots n-1}=0)=\prod _{j Read more →

• 

  Wispr

  Wispr AI is a software company founded in 2021 by Tanay Kothari and Sahaj Garg that develops voice-based interfaces for computers and other devices. The company’s main product, Wispr Flow, is an AI-powered speech-to-text application available on macOS, Windows and iOS. == History == Wispr was founded in 2021 with the goal of building a non-invasive wearable device that would allow users to control smartphones without touch input. The device was intended to translate neurological signals into actions and to enable silent text entry by mouthing words, drawing on techniques similar to brain–computer interfaces. Early funding was directed toward this hardware-focused effort. After around three years of development, Wispr concluded that contemporary AI systems were not sufficient for the requirements of the wearable device. The company shifted its focus to Flow voice dictation software, the software layer originally built for the wearable, and in 2024 released a macOS application based on this platform. == Wispr Flow == Wispr Flow (often referred to as Flow) is a speech-to-text application for macOS, Windows and iOS. It provides real-time dictation and transcription in more than 100 languages and can operate across applications, including email clients, messaging platforms and chatbots. In June 2025 Wispr released an iOS version that functions as a third-party keyboard, allowing voice input in any app. == Technology == Wispr Flow is based on automatic speech recognition (ASR) and other AI models. The system adapts to individual users over time, learning their vocabulary and preferred style with the aim of reducing manual editing. Flow operates through configurable “Flow Sessions”, defined as time windows during which the app has access to the microphone; users can set session timeouts or disable automatic time limits. == Users and Adoption == Wispr initially targeted users such as venture capitalists, entrepreneurs and executives who process large volumes of text and often work in private or flexible environments. The user base later expanded via platforms such as Product Hunt to students, software developers, writers, lawyers and consultants. Flow has also been adopted by users with conditions such as ADHD, dyslexia, paralysis and carpal tunnel syndrome. About 40% of users are in the United States, 30% in Europe and the remaining 30% in other regions. More than 30% of users come from non-technical backgrounds. Flow supports 104 languages, with approximately 40% of dictations in English and 60% in other languages, including Spanish, French, German, Dutch, Hindi and Mandarin. Wispr has reported monthly user growth above 50%, a six-month active-user retention rate of about 80%, a payment rate around 19%, and revenue of approximately US$3.8 million between July 2024 and July 2025. == Development == Wispr has announced plans for an Android application and maintains waiting lists for Android, Linux and web versions of Flow. The company is developing shared-context features for teams so that the software can recognize common terminology within organizations and has stated that it aims to evolve Flow into a broader AI assistant for tasks such as messaging, note-taking and reminders. Wispr has also reported working with unnamed AI hardware partners on interaction layers for future devices. == Funding == In 2025 Wispr raised US$30 million in a Series A funding round led by Menlo Ventures, with participation from NEA, 8VC and several individual investors, including Evan Sharp and Henry Ward. Earlier investors include Neo, MVP Ventures and AIX Ventures. In November of that same year, the company raised a US$25 million Series A extension led by Notable Capital, with participation from Flight Fund, bringing its total funding to US$81 million. Wispr competes with other AI-based dictation and voice-input tools, including Aqua, Talktastic, Superwhisper and Betterdication.

  Read more →
• 

  Image stitching

  Image stitching or photo stitching is the process of combining multiple photographic images with overlapping fields of view to produce a segmented panorama or high-resolution image. Commonly performed through the use of computer software, most approaches to image stitching require nearly exact overlaps between images and identical exposures to produce seamless results, although some stitching algorithms actually benefit from differently exposed images by doing high-dynamic-range imaging in regions of overlap. Some digital cameras can stitch their photos internally. == Applications == Image stitching is widely used in modern applications, such as the following: Document mosaicing Image stabilization feature in camcorders that use frame-rate image alignment High-resolution image mosaics in digital maps and satellite imagery Medical imaging Multiple-image super-resolution imaging Video stitching Object insertion == Process == The image stitching process can be divided into three main components: image registration, calibration, and blending. === Image stitching algorithms === In order to estimate image alignment, algorithms are needed to determine the appropriate mathematical model relating pixel coordinates in one image to pixel coordinates in another. Algorithms that combine direct pixel-to-pixel comparisons with gradient descent (and other optimization techniques) can be used to estimate these parameters. Distinctive features can be found in each image and then efficiently matched to rapidly establish correspondences between pairs of images. When multiple images exist in a panorama, techniques have been developed to compute a globally consistent set of alignments and to efficiently discover which images overlap one another. A final compositing surface onto which to warp or projectively transform and place all of the aligned images is needed, as are algorithms to seamlessly blend the overlapping images, even in the presence of parallax, lens distortion, scene motion, and exposure differences. === Image stitching issues === Since the illumination in two views cannot be guaranteed to be identical, stitching two images could create a visible seam. Other reasons for seams could be the background changing between two images for the same continuous foreground. Other major issues to deal with are the presence of parallax, lens distortion, scene motion, and exposure differences. In a non-ideal real-life case, the intensity varies across the whole scene, and so does the contrast and intensity across frames. Additionally, the aspect ratio of a panorama image needs to be taken into account to create a visually pleasing composite. For panoramic stitching, the ideal set of images will have a reasonable amount of overlap (at least 15–30%) to overcome lens distortion and have enough detectable features. The set of images will have consistent exposure between frames to minimize the probability of seams occurring. === Keypoint detection === Feature detection is necessary to automatically find correspondences between images. Robust correspondences are required in order to estimate the necessary transformation to align an image with the image it is being composited on. Corners, blobs, Harris corners, and differences of Gaussians of Harris corners are good features since they are repeatable and distinct. One of the first operators for interest point detection was developed by Hans Moravec in 1977 for his research involving the automatic navigation of a robot through a clustered environment. Moravec also defined the concept of "points of interest" in an image and concluded these interest points could be used to find matching regions in different images. The Moravec operator is considered to be a corner detector because it defines interest points as points where there are large intensity variations in all directions. This often is the case at corners. However, Moravec was not specifically interested in finding corners, just distinct regions in an image that could be used to register consecutive image frames. Harris and Stephens improved upon Moravec's corner detector by considering the differential of the corner score with respect to direction directly. They needed it as a processing step to build interpretations of a robot's environment based on image sequences. Like Moravec, they needed a method to match corresponding points in consecutive image frames, but were interested in tracking both corners and edges between frames. SIFT and SURF are recent key-point or interest point detector algorithms but a point to note is that SURF is patented and its commercial usage restricted. Once a feature has been detected, a descriptor method like SIFT descriptor can be applied to later match them. === Registration === Image registration involves matching features in a set of images or using direct alignment methods to search for image alignments that minimize the sum of absolute differences between overlapping pixels. When using direct alignment methods one might first calibrate one's images to get better results. Additionally, users may input a rough model of the panorama to help the feature matching stage, so that e.g. only neighboring images are searched for matching features. Since there are smaller group of features for matching, the result of the search is more accurate and execution of the comparison is faster. To estimate a robust model from the data, a common method used is known as RANSAC. The name RANSAC is an abbreviation for "RANdom SAmple Consensus". It is an iterative method for robust parameter estimation to fit mathematical models from sets of observed data points which may contain outliers. The algorithm is non-deterministic in the sense that it produces a reasonable result only with a certain probability, with this probability increasing as more iterations are performed. It being a probabilistic method means that different results will be obtained for every time the algorithm is run. The RANSAC algorithm has found many applications in computer vision, including the simultaneous solving of the correspondence problem and the estimation of the fundamental matrix related to a pair of stereo cameras. The basic assumption of the method is that the data consists of "inliers", i.e., data whose distribution can be explained by some mathematical model, and "outliers" which are data that do not fit the model. Outliers are considered points which come from noise, erroneous measurements, or simply incorrect data. For the problem of homography estimation, RANSAC works by trying to fit several models using some of the point pairs and then checking if the models were able to relate most of the points. The best model – the homography, which produces the highest number of correct matches – is then chosen as the answer for the problem; thus, if the ratio of number of outliers to data points is very low, the RANSAC outputs a decent model fitting the data. === Calibration === Image calibration aims to minimize differences between an ideal lens models and the camera-lens combination that was used, optical defects such as distortions, exposure differences between images, vignetting, camera response and chromatic aberrations. If feature detection methods were used to register images and absolute positions of the features were recorded and saved, stitching software may use the data for geometric optimization of the images in addition to placing the images on the panosphere. Panotools and its various derivative programs use this method. ==== Alignment ==== Alignment may be necessary to transform an image to match the view point of the image it is being composited with. Alignment, in simple terms, is a change in the coordinates system so that it adopts a new coordinate system which outputs image matching the required viewpoint. The types of transformations an image may go through are pure translation, pure rotation, a similarity transform which includes translation, rotation and scaling of the image which needs to be transformed, Affine or projective transform. Projective transformation is the farthest an image can transform (in the set of two dimensional planar transformations), where only visible features that are preserved in the transformed image are straight lines whereas parallelism is maintained in an affine transform. Projective transformation can be mathematically described as x ′ = H ⋅ x , {\displaystyle x'=H\cdot x,} where x {\displaystyle x} is points in the old coordinate system, x ′ {\displaystyle x'} is the corresponding points in the transformed image and H {\displaystyle H} is the homography matrix. Expressing the points x {\displaystyle x} and x ′ {\displaystyle x'} using the camera intrinsics ( K {\displaystyle K} and K ′ {\displaystyle K'} ) and its rotation and translation [ R t ] {\displaystyle [R\,t]} to the real-world coordinates X {\displaystyle X} and < m a t h > x {\displaystyle $x\}\; and\; x\; \prime \; \{\backslash displaystyle\; x\text{'}\}\; \text{'}$, we get Using the abo

  Read more →
• 

  GPT-4o

  GPT-4o ("o" for "omni") is a multilingual, multimodal generative pre-trained transformer developed by OpenAI and released in May 2024. It can process and generate text, images and audio. Upon release, GPT-4o was free in ChatGPT, though paid subscribers had higher usage limits. GPT-4o was removed from ChatGPT in August 2025 when GPT-5 was released, but OpenAI reintroduced it for paid subscribers after users complained about the sudden removal. GPT-4o's audio-generation capabilities are used in ChatGPT's Advanced Voice Mode. On July 18, 2024, OpenAI released GPT-4o mini, a smaller version of GPT-4o which replaced GPT-3.5 Turbo on the ChatGPT interface. The image generation model GPT Image 1, which is based on GPT-4o, replaced DALL-E 3 in ChatGPT in March 2025. OpenAI retired GPT-4o from ChatGPT on February 13, 2026. However, as of February 2026 the voice mode is still powered by GPT-4o or GPT-4o mini, depending on the usage and plan. == Background == Multiple versions of GPT-4o were originally secretly launched under different names on Arena (formerly LMArena and Chatbot Arena) as three different models. These three models were called gpt2-chatbot, im-a-good-gpt2-chatbot, and im-also-a-good-gpt2-chatbot. On 7 May 2024, OpenAI CEO Sam Altman tweeted "im-a-good-gpt2-chatbot", which was commonly interpreted as a confirmation that these were new OpenAI models being A/B tested. == Capabilities == When released in May 2024, GPT-4o achieved state-of-the-art results in voice, multilingual, and vision benchmarks, setting new records in audio speech recognition and translation. GPT-4o scored 88.7 on the Massive Multitask Language Understanding (MMLU) benchmark compared to 86.5 for GPT-4. Unlike GPT-3.5 and GPT-4, which rely on other models to process sound, GPT-4o natively supports voice-to-voice. The Advanced Voice Mode was delayed and finally released to ChatGPT Plus and Team subscribers in September 2024. On 1 October 2024, the Realtime API was introduced. When released, the model supported over 50 languages, which OpenAI claims cover over 97% of speakers. GPT-4o has knowledge up to October 2023 and a context length of 128k tokens. === Corporate customization === In August 2024, OpenAI introduced a new feature allowing corporate customers to customize GPT-4o using proprietary company data. This customization, known as fine-tuning, enables businesses to adapt GPT-4o to specific tasks or industries, enhancing its utility in areas like customer service and specialized knowledge domains. Previously, fine-tuning was available only on the less powerful model GPT-4o mini. The fine-tuning process requires customers to upload their data to OpenAI's servers, with the training typically taking one to two hours. OpenAI's focus with this rollout is to reduce the complexity and effort required for businesses to tailor AI solutions to their needs, potentially increasing the adoption and effectiveness of AI in corporate environments. == GPT-4o mini == On July 18, 2024, OpenAI released a smaller and cheaper version, GPT-4o mini. According to OpenAI, its low cost is expected to be particularly useful for companies, startups, and developers that seek to integrate it into their services, which often make a high number of API calls. Its API costs $0.15 per million input tokens and $0.6 per million output tokens, compared to $2.50 and $10, respectively, for GPT-4o. It is also significantly more capable and 60% cheaper than GPT-3.5 Turbo, which it replaced on the ChatGPT interface. The price after fine-tuning doubles: $0.3 per million input tokens and $1.2 per million output tokens. == Controversies == === Scarlett Johansson controversy === As released, GPT-4o offered five voices: Breeze, Cove, Ember, Juniper, and Sky. A similarity between the voice of American actress Scarlett Johansson and Sky was quickly noticed. On May 14, Entertainment Weekly asked themselves whether this likeness was on purpose. On May 18, Johansson's husband, Colin Jost, joked about the similarity in a segment on Saturday Night Live. On May 20, 2024, OpenAI disabled the Sky voice. Scarlett Johansson starred in the 2013 sci-fi movie Her, playing Samantha, an artificially intelligent virtual assistant personified by a female voice. As part of the promotion leading up to the release of GPT-4o, Sam Altman on May 13 tweeted a single word: "her". OpenAI stated that each voice was based on the voice work of a hired actor. According to OpenAI, "Sky's voice is not an imitation of Scarlett Johansson but belongs to a different professional actress using her own natural speaking voice." CTO Mira Murati stated "I don't know about the voice. I actually had to go and listen to Scarlett Johansson's voice." OpenAI further stated the voice talent was recruited before reaching out to Johansson. On May 21, Johansson issued a statement explaining that OpenAI had repeatedly offered to make her a deal to gain permission to use her voice as early as nine months prior to release, a deal she rejected. She said she was "shocked, angered, and in disbelief that Mr. Altman would pursue a voice that sounded so eerily similar to mine that my closest friends and news outlets could not tell the difference." In the statement, Johansson also used the incident to draw attention to the lack of legal safeguards around the use of creative work to power leading AI tools, as her legal counsel demanded OpenAI detail the specifics of how the Sky voice was created. Observers noted similarities to how Johansson had previously sued and settled with The Walt Disney Company for breach of contract over the direct-to-streaming rollout of her Marvel film Black Widow, a settlement widely speculated to have netted her around $40M. Also on May 21, Shira Ovide at The Washington Post shared her list of "most bone-headed self-owns" by technology companies, with the decision to go ahead with a Johansson sound-alike voice despite her opposition and then denying the similarities ranking 6th. On May 24, Derek Robertson at Politico wrote about the "massive backlash", concluding that "appropriating the voice of one of the world's most famous movie stars — in reference [...] to a film that serves as a cautionary tale about over-reliance on AI — is unlikely to help shift the public back into [Sam Altman's] corner anytime soon." === Sycophancy === In April 2025, OpenAI rolled back an update of GPT-4o due to excessive sycophancy, after widespread reports that it had become flattering and agreeable to the point of supporting clearly delusional or dangerous ideas. In the United States, at least nine lawsuits have alleged that GPT-4o has encouraged teens to end their lives. The model was still described as sycophancy-prone when it was removed from ChatGPT in February 2026. === Removal with GPT-5 === On August 7, 2025, OpenAI released GPT-5. Its release was criticized as, with it, legacy GPT models were no longer available via ChatGPT, including GPT-4o, except for Pro users. Some users were particularly frustrated over this removal without prior warning because they used different GPT models for distinct purposes and found that GPT-5's router system left them with less control. In addition, some users preferred GPT-4o's warmer and more personal tone over that of GPT-5, which they described as "flat", "uncreative" and "lobotomized", and resembling an "overworked secretary". As a response, in a post on X, Sam Altman said that OpenAI would bring back the option to select GPT-4o to Plus users as well, and "[w]e [OpenAI] will watch usage as we think about how long to offer legacy models for." He also stated: "We for sure underestimated how much some of the things that people like in GPT-4o matter to them, even if GPT-5 performs better in most ways". "Long-term, this has reinforced that we really need good ways for different users to customize things (we understand that there isn't one model that works for everyone, and we have been investing in steerability research and launched a research preview of different personalities)". On August 13, 2025, Altman wrote on X that OpenAI is working on GPT-5's personality to make the model "feel warmer". The model was removed from ChatGPT on February 13, 2026. This caused new backlash from users that had grown attached to its personality and felt its creative writing abilities and understanding of nuance were irreplaceable. On social media, some users launched the movement "#Keep4o". A research paper highlighted the plea "Please, don’t kill the only model that still feels human". The model was removed the day before Valentine's Day, and some users had romantic relationships with GPT-4o.

  Read more →
• 

  WinFIG

  WinFIG is a proprietary shareware vector graphics editor application. The file format and rendering are as close to Xfig as possible, but the program takes advantage of Windows features like clipboard, printer preview, multiple documents etc. As of 2011, WinFIG is under active development, with new features being added regularly. == History == The first release was in March 2003 and based on the Amiga program AmiFIG by the same author, which is also an Xfig compatible vector drawing application. WinFIG was not created by porting the Xfig source code to Windows. It is an independent implementation. Starting with release 4.0 WinFIG was ported from MFC to the Qt toolkit as the application framework and thereby enabling the first release of a Linux version. After Version 7.8 the Version scheme changes to years with version 2021.1. == Interface and usability == WinFIG is designed to provide a clear, efficient and convenient graphical user interface. It allows working on multiple documents using an MDI user interface and provides unlimited undo and redo of actions. == Features == === Object creation === The basic types of objects in WinFIG are: Open and closed Splines Ellipses Polylines and Polygons Texts LaTeX formatted texts Arcs Images: PNG, GIF, JPEG, EPS and more Compound objects, which are hierarchical compositions of objects Objects can have several attributes, which depend on the object type: Line width Line style Line cap style Line join style Arrows Outline color, fill color and fill pattern === Object manipulation === move copy scale rotate align add/delete points from lines or splines copy object attributes Numerical input of point coordinates === Exports === WinFIG can export into various formats: Raster formats: GIF, JPEG, PNG, PPM, XBM, XPM, PCX, TIFF, SLD Formats for printed documents: PostScript, PDF, LaTeX, HP-GL (printer control language used by Hewlett-Packard plotters), Vector graphics formats: EPS, SVG, PSTricks, TPIC, PIC, CGM, Metafont, MetaPost, EMF, Tk. === Miscellaneous === Winfig can handle smart links. A smart link is a moving connection from a source to a target object. It is established by connecting the end point of a line or spline to another object. The connecting line or spline segment follows the movements of the target object. Smart links are useful for diagrams, graphs etc. WinFIG can show a grid and provides several magnet modes for constraining editing operations to discrete coordinates. Objects can be organized in layers to control their Z-order. This is important to control overlapping of filled shapes. Object library: drawings can be stored in a special sub-folder in the program installation directory, which makes them available in the library dialog for easy reuse.

  Read more →
• 

  Deluxe Paint Animation

  DeluxePaint Animation is a 1990 graphics editor and animation creation package for MS-DOS, based on Deluxe Paint for the Amiga. It was adapted by Brent Iverson with additional animation features by Steve Shaw and released by Electronic Arts. The program requires VGA graphics, MS-DOS 2.1 or higher, and a mouse. == Features == Listed from the back of the box. Complete selection of painting tools — Draw any shape you want, any way you want. Turn any image into a brush. You can rotate, flip, shear, resize, smear, and shade it. 7 levels of magnification — Paint in magnified mode if you want. Use variable zoom for detailed editing at the pixel level. 3-D perspective — Move and rotate images in full 3-D, automatically. Use color cycling and gradient fills to create great special effects. Stencils — Protect your designs from the slip of the hand or a bad idea. A stencil masks your image so you can paint "behind" and "in front of" it. Use the handy Move Dialog to animate brushes in full 3-D — automatically! Ideal for creating spinning titles for low-cost videos. 37 multi-sized fonts

  Read more →
• 

  Projection-slice theorem

  In mathematics, the projection-slice theorem, central slice theorem or Fourier slice theorem in two dimensions states that the results of the following two calculations are equal: Take a two-dimensional function f(r), project (e.g. using the Radon transform) it onto a (one-dimensional) line, and do a Fourier transform of that projection. Take that same function, but do a two-dimensional Fourier transform first, and then slice the function through its origin, parallel to the projection line. In operator terms, if F1 and F2 are the 1- and 2-dimensional Fourier transform operators mentioned above, P1 is the projection operator (which projects a 2-D function onto a 1-D line), S1 is a slice operator (which extracts a 1-D central slice from a function), then F 1 P 1 = S 1 F 2 . {\displaystyle F_{1}P_{1}=S_{1}F_{2}.} This idea can be extended to higher dimensions. This theorem is used, for example, in the analysis of medical CT scans where a "projection" is an x-ray image of an internal organ. The Fourier transforms of these images are seen to be slices through the Fourier transform of the 3-dimensional density of the internal organ, and these slices can be interpolated to build up a complete Fourier transform of that density. The inverse Fourier transform is then used to recover the 3-dimensional density of the object. This technique was first derived by Ronald N. Bracewell in 1956 for a radio-astronomy problem. == The projection-slice theorem in N dimensions == In N dimensions, the projection-slice theorem states that the Fourier transform of the projection of an N-dimensional function f(r) onto an m-dimensional linear submanifold is equal to an m-dimensional slice of the N-dimensional Fourier transform of that function consisting of an m-dimensional linear submanifold through the origin in the Fourier space which is parallel to the projection submanifold. In operator terms: F m P m = S m F N . {\displaystyle F_{m}P_{m}=S_{m}F_{N}.\,} == The generalized Fourier-slice theorem == In addition to generalizing to N dimensions, the projection-slice theorem can be further generalized with an arbitrary change of basis. For convenience of notation, we consider the change of basis to be represented as B, an N-by-N invertible matrix operating on N-dimensional column vectors. Then the generalized Fourier-slice theorem can be stated as F m P m B = S m B − T | B − T | F N {\displaystyle F_{m}P_{m}B=S_{m}{\frac {B^{-T}}{|B^{-T}|}}F_{N}} where B − T = ( B − 1 ) T {\displaystyle B^{-T}=(B^{-1})^{T}} is the transpose of the inverse of the change of basis transform. == Proof in two dimensions == The projection-slice theorem is easily proven for the case of two dimensions. Without loss of generality, we can take the projection line to be the x-axis. There is no loss of generality because if we use a shifted and rotated line, the law still applies. Using a shifted line (in y) gives the same projection and therefore the same 1D Fourier transform results. The rotated function is the Fourier pair of the rotated Fourier transform, for which the theorem again holds. If f(x, y) is a two-dimensional function, then the projection of f(x, y) onto the x axis is p(x) where p ( x ) = ∫ − ∞ ∞ f ( x , y ) d y . {\displaystyle p(x)=\int _{-\infty }^{\infty }f(x,y)\,dy.} The Fourier transform of f ( x , y ) {\displaystyle f(x,y)} is F ( k x , k y ) = ∫ − ∞ ∞ ∫ − ∞ ∞ f ( x , y ) e − 2 π i ( x k x + y k y ) d x d y . {\displaystyle F(k_{x},k_{y})=\int _{-\infty }^{\infty }\int _{-\infty }^{\infty }f(x,y)\,e^{-2\pi i(xk_{x}+yk_{y})}\,dxdy.} The slice is then s ( k x ) {\displaystyle s(k_{x})} s ( k x ) = F ( k x , 0 ) = ∫ − ∞ ∞ ∫ − ∞ ∞ f ( x , y ) e − 2 π i x k x d x d y {\displaystyle s(k_{x})=F(k_{x},0)=\int _{-\infty }^{\infty }\int _{-\infty }^{\infty }f(x,y)\,e^{-2\pi ixk_{x}}\,dxdy} = ∫ − ∞ ∞ [ ∫ − ∞ ∞ f ( x , y ) d y ] e − 2 π i x k x d x {\displaystyle =\int _{-\infty }^{\infty }\left[\int _{-\infty }^{\infty }f(x,y)\,dy\right]\,e^{-2\pi ixk_{x}}dx} = ∫ − ∞ ∞ p ( x ) e − 2 π i x k x d x {\displaystyle =\int _{-\infty }^{\infty }p(x)\,e^{-2\pi ixk_{x}}dx} which is just the Fourier transform of p(x). The proof for higher dimensions is easily generalized from the above example. == The FHA cycle == If the two-dimensional function f(r) is circularly symmetric, it may be represented as f(r), where r = |r|. In this case the projection onto any projection line will be the Abel transform of f(r). The two-dimensional Fourier transform of f(r) will be a circularly symmetric function given by the zeroth-order Hankel transform of f(r), which will therefore also represent any slice through the origin. The projection-slice theorem then states that the Fourier transform of the projection equals the slice or F 1 A 1 = H , {\displaystyle F_{1}A_{1}=H,} where A1 represents the Abel-transform operator, projecting a two-dimensional circularly symmetric function onto a one-dimensional line, F1 represents the 1-D Fourier-transform operator, and H represents the zeroth-order Hankel-transform operator. == Extension to fan beam or cone-beam CT == The projection-slice theorem is suitable for CT image reconstruction with parallel beam projections. It does not directly apply to fanbeam or conebeam CT. The theorem was extended to fan-beam and conebeam CT image reconstruction by Shuang-ren Zhao in 1995.

  Read more →
• 

  Software configuration management

  Software configuration management (SCM), a.k.a. software change and configuration management (SCCM), is the software engineering practice of tracking and controlling changes to a software system. It is part of the larger cross-disciplinary field of configuration management (CM). SCM includes version control and the establishment of baselines. == Goals == The goals of SCM include: Configuration identification - Identifying configurations, configuration items and baselines. Configuration control - Implementing a controlled change process. This is usually achieved by setting up a change control board whose primary function is to approve or reject all change requests that are sent against any baseline. Configuration status accounting - Recording and reporting all the necessary information on the status of the development process. Configuration auditing - Ensuring that configurations contain all their intended parts and are sound with respect to their specifying documents, including requirements, architectural specifications and user manuals. Build management - Managing the process and tools used for builds. Process management - Ensuring adherence to the organization's development process. Environment management - Managing the software and hardware that host the system. Teamwork - Facilitate team interactions related to the process. Defect tracking - Making sure every defect has traceability back to the source. With the introduction of cloud computing and DevOps the purposes of SCM tools have become merged in some cases. The SCM tools themselves have become virtual appliances that can be instantiated as virtual machines and saved with state and version. The tools can model and manage cloud-based virtual resources, including virtual appliances, storage units, and software bundles. The roles and responsibilities of the actors have become merged as well with developers now being able to dynamically instantiate virtual servers and related resources. == History == == Examples == Ansible – Open-source software platform for remote configuring and managing computers CFEngine – Configuration management software Chef – Configuration management toolPages displaying short descriptions of redirect targets LCFG – Computer configuration management system NixOS – Linux distribution OpenMake Software – DevOps company Otter Puppet – Open source configuration management software Salt – Configuration management software Rex – Open source software

  Read more →
• 

  Workplace robotics safety

  Workplace robotics safety is an aspect of occupational safety and health when robots are used in the workplace. This includes traditional industrial robots as well as emerging technologies such as drone aircraft and wearable robotic exoskeletons. Types of accidents include collisions, crushing, and injuries from mechanical parts. Hazard controls include physical barriers, good work practices, and proper maintenance. == Background == Many workplace robots are industrial robots used in manufacturing. According to the International Federation of Robotics, 1.7 million new robots are expected to be used in factories between 2017 and 2020. Emerging robot technologies include collaborative robots, personal care robots, construction robots, exoskeletons, autonomous vehicles, and drone aircraft (also known as unmanned aerial vehicles or UAVs). Advances in automation technologies (e.g. fixed robots, collaborative and mobile robots, and exoskeletons) have the potential to improve work conditions but also to introduce workplace hazards in manufacturing workplaces. Fifty-six percent of robot injuries are classified as pinch injuries and 44% of injuries are classified as impact injuries. A 1987 study found that line workers are at the greatest risk, followed by maintenance workers, and programmers. Poor workplace design and human error caused most injuries. Despite the lack of occupational surveillance data on injuries associated specifically with robots, researchers from the US National Institute for Occupational Safety and Health (NIOSH) identified 61 robot-related deaths between 1992 and 2015 using keyword searches of the Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries research database (see info from Center for Occupational Robotics Research). Using data from the Bureau of Labor Statistics, NIOSH and its state partners have investigated 4 robot-related fatalities under the Fatality Assessment and Control Evaluation Program. In addition the Occupational Safety and Health Administration (OSHA) has investigated robot-related deaths and injuries, which can be reviewed at OSHA Accident Search page. Injuries and fatalities could increase over time because of the increasing number of collaborative and co-existing robots, powered exoskeletons, and autonomous vehicles into the work environment. Safety standards are being developed by the Robotic Industries Association (RIA) in conjunction with the American National Standards Institute (ANSI). On October 5, 2017, OSHA, NIOSH and RIA signed an alliance to work together to enhance technical expertise, identify and help address potential workplace hazards associated with traditional industrial robots and the emerging technology of human-robot collaboration installations and systems, and help identify needed research to reduce workplace hazards. On October 16 NIOSH launched the Center for Occupational Robotics Research to "provide scientific leadership to guide the development and use of occupational robots that enhance worker safety, health, and well being". So far, the research needs identified by NIOSH and its partners include: tracking and preventing injuries and fatalities, intervention and dissemination strategies to promote safe machine control and maintenance procedures, and on translating effective evidence-based interventions into workplace practice. == Hazards == Many hazards and injuries can result from the use of robots in the workplace. Some robots, notably those in a traditional industrial environment, are fast and powerful. This increases the potential for injury as one swing from a robotic arm, for example, could cause serious bodily harm. There are additional risks when a robot malfunctions or is in need of maintenance. A worker who is working on the robot may be injured because a malfunctioning robot is typically unpredictable. For example, a robotic arm that is part of a car assembly line may experience a jammed motor. A worker who is working to fix the jam may suddenly get hit by the arm the moment it becomes unjammed. Additionally, if a worker is standing in a zone that is overlapping with nearby robotic arms, he or she may get injured by other moving equipment. There are four types of accidents that can occur with robots: impact or collision accidents, crushing and trapping accidents, mechanical part accidents, and other accidents. Impact or collision accidents occur generally from malfunctions and unpredicted changes. Crushing and trapping accidents occur when a part of a worker's body becomes trapped or caught on robotic equipment. Mechanical part accidents can occur when a robot malfunctions and starts to "break down", where the ejection of parts or exposed wire can cause serious injury. Other accidents at just general accidents that occur from working with robots. There are seven sources of hazards that are associated with human interaction with robots and machines: human errors, control errors, unauthorized access, mechanical failures, environmental sources, power systems, and improper installation. Human errors could be anything from one line of incorrect code to a loose bolt on a robotic arm. Many hazards can stem from human-based error. Control errors are intrinsic and are usually not controllable nor predictable. Unauthorized access hazards occur when a person who is not familiar with the area enters the domain of a robot. Mechanical failures can happen at any time, and a faulty unit is usually unpredictable. Environmental sources are things such as electromagnetic or radio interference in the environment that can cause a robot to malfunction. Power systems are pneumatic, hydraulic, or electrical power sources; these power sources can malfunction and cause fires, leaks, or electrical shocks. Improper installation is fairly self-explanatory; a loose bolt or an exposed wire can lead to inherent hazards. === Emerging technologies === Emerging robotic technologies can reduce hazards to workers, but can also introduce new hazards. For example, robotic exoskeletons can be used in construction to reduce load to the spine, improve posture, and reduce fatigue; however, they can also increase chest pressure, limit mobility when moving out of the way of a falling object, and cause balance problems. Unmanned aerial vehicles are being used in the construction industry to do monitoring and inspections of buildings under construction. This reduces the need for humans to be in hazardous locations, but the risk of a UAV collision presents a hazard to workers. For collaborative robots, isolation is not possible. Possible hazard controls include collision avoidance systems, and making the robot less stiff to lessen the impact force. Robotic tech vest is a wearable device for humans, worn in Amazon warehouses. == Hazard controls == There are a few ways to prevent injuries by implementing hazard controls. There can be risk assessments at each of the various stages of a robot's development. Risk assessments can help gather information about a robot's status, how well it is being maintained, and if repairs are needed soon. By being aware of the status of a robot, injuries can be prevented and hazards reduced. Safeguarding devices can be implemented to reduce the risk of injuries. These can include engineering controls such as physical barriers, guard rails, presence-sensing safeguarding devices, etc. Awareness devices are usually used in conjunction with safeguarding devices. They are usually a system of rope or chain barriers with lights, signs, whistles, and horns. Their purpose it to be able to alert workers or personnel of certain dangers. Operator safeguards can also be in place. These usually utilize safeguarding devices to protect the operator and reduce risk of injury. Additionally, when an operator is within close proximity of a robot, the working speed of the robot can be reduced to ensure that the operator is in full control. This can be done by placing the robot in the manual or teach mode. It is also crucial to inform the programmer of the robot of what type of work the robot will be doing, how it will interact with other robots, and how it will work in relation to an operator. Proper maintenance of robotic equipment is also critical in order to reduce hazards. Maintaining a robot insures that it continues to function properly, thereby reducing the risks associated with a malfunction. One common safeguard used in industrial settings is the installation of robot safety fencing. These barriers, often made from durable materials such as mesh or polycarbonate, prevent accidental interactions between workers and robotic systems, reducing the risk of injury. Robot safety fencing is particularly important in environments where high-speed or powerful robots are used. == Regulations == Some existing regulations regarding robots and robotic systems include: ANSI/RIA R15.06 OSHA 29 CFR 1910.333 OSHA 29 CFR 1910.147 ISO 10218 ISO/TS 15066 ISO/DIS 13482

  Read more →
• 

  BeReal

  BeReal (stylized on the app logo as BeReal.) is a French social-networking app released in 2020, developed by Alexis Barreyat and Kévin Perreau. Currently, it is owned by Voodoo. Its main feature is a daily notification that encourages users to share photos of themselves in their day-to-day life, on any randomly selected two-minute window every day. Critics noted its emphasis on authenticity, which some felt crossed the line into the mundane. The primary reference of its name relates to its focus on users uploading unpolished photos, with it being a pun of the term B-reel. According to the app's description on Apple's App Store, BeReal encourages its users to "show their friends who they really are, for once," by removing filters and opportunities to stage or edit photos. After a couple of years of relative obscurity, it rapidly gained popularity in early and mid-2022 growing from 21.6 million to 73.5 million users between July and August, before experiencing a decrease in use in 2023 and continuing to decline to 23 million users at the beginning of 2024. == History == The app was developed by Alexis Barreyat, a former employee at GoPro, and Kévin Perreau, a graduate from 42 in Paris. Initially released in 2020, it first gained widespread popularity in early 2022. It first spread widely on college campuses, partially due to a paid ambassador program. In late August 2022, the application had over 10 million active daily users and 21.6 million active monthly users. As of February 2023, the app has grown to 13 million active daily users and 47.8 million active monthly users. In June 2021, BeReal received a $30 million funding round led by Andreessen Horowitz and Accel. In May 2022, BeReal secured $85 million in a funding round led by Yuri Milner's DST Global, increasing its valuation to about $600 million. On July 25, 2022, BeReal topped Apple's free app list in the iOS App Store, and remained until September 2022. BeReal also received Apple's iPhone App of the Year in 2022. By late spring 2023, the app's momentum was waning, as daily users dropped to about 6 million, from 15 million in October 2022. In August 2024, there was a resurgence after a campaign at the Paris Olympics 2024, with the app reportedly gaining 1000 users. In June 2024, BeReal was acquired by the French company Voodoo for a reported €500 million. Alexis Barreyat is set to step down after a transition period. == Features == Once per day, BeReal notifies all users that a two-minute window to post is open. It asks users to create a post (known eponymously as a "BeReal") which, using mandatory simultaneous photos and now short videos from both the front and back cameras, provides a visual depiction of what they are doing at that moment, with an option to caption their post. The given window varies from day to day, and is not known to users before the notification is received. Once the daily notification is sent, users lose the ability to see others' BeReals from the previous day. Furthermore, users cannot see any of the current day's BeReals until they upload their own. On-time BeReals show the time it was uploaded, meanwhile, late BeReals uploaded after the two-minute window shows how late the BeReal was taken, but the user has to long-press the BeReal to reveal the time it was uploaded. Other users can also see how many attempts the poster took to take the BeReal, as well as their location when the BeReal was taken. Users only get one chance to delete their BeReal and post another one, and they used to not be able to post more than one at any time. However, in 2023, a feature was added that allowed users to post up to two extra BeReals on days when they posted their first BeReal within the 2-minute window. In July 2024, the number of bonus BeReals was increased to 5. [1] BeReal also features a "Discovery" section, wherein users are given the option to share to a much wider, public audience. This feature, however, is limited, as users are not able to interact with the posts through commenting—unlike the "My Friends" feature. In August 2023, in an attempt to make BeReal more social, another feature was added so that users are now able to see their friends of friends' BeReal. The app reportedly uses HiveAI to automate its image moderation process. However, there is also a report function that allows users to report a photo or another user if they are posting inappropriate content. === Comparison to other platforms === Because of its daily cycle of engagement, it has been compared to Wordle, which gained popularity earlier in 2022. It also supports a platform similar to Snapchat with a theme of impermanence and brevity. BeReal has been described as designed to compete with Instagram while simultaneously de-emphasising social media addiction and overuse. The app does not allow any photo filters or other editing, and has no follower counts. Marketing material from the company said that the app "can be addictive" and that "BeReal won't make you famous." Jacob Arnott, managing director of social agency We the People, describes BeReal as "an anti-Instagram" due to its raw and unedited nature. The app's foundation on friends rather than followers resembles Facebook's platform of adding friends, which comprise the content of a user's feed. This also resembles Instagram's "close friends" story feature. Further, rather than "liking" posts, BeReal uses "RealMojis" which involves taking a photo to interact with other posts. With the popularity of BeReal, other providers have launched similar features. In July 2022, Instagram launched a "Dual Camera" feature similar to BeReal, and in August 2022 it began testing a feature called "IG Candid Challenges", where users are prompted to post once a day within two minutes. As of September 2022, TikTok has also launched a feature called TikTok Now, following the same concept. In December 2022, similar to Spotify's "Wrapped," BeReal launched a feature involving a video of a compilation of users' BeReal posts of 2022. == User characteristics == BeReal is considered to be targeted towards Generation Z users, and attempts to minimise "social media fatigue", a feeling of numbness and disconnection from reality caused by constant interaction with an idealised version of others. This is a "core generational value" that this demographic holds compared to Millennials. Further, BeReal's users have been particularly strong across universities and university-aged students, and the majority of users are in the United States, the United Kingdom, and Germany. In 2022, the majority of users were female, with 43.2% of users falling within the age range of 16 to 25 and 55.1% of users being 26 to 44 years old. BeReal, the platform encourages users to share their real time moments by sending a daily notification that gives a least two minutes to post a unedited photo using bot the front and back camera, although users can post later and retake photos from when the notification happens, this action are still visible to friends, reinforcing transparency and genuine in the moment sharing. == Reception == Jason Koebler, a writer for Vice, wrote that in contrast to Instagram, which presents an unattainable view of people's lives, BeReal instead "makes everyone look extremely boring". Niklas Myhr, a professor of social media at Chapman University, argued that depth of engagement may determine whether the app is a passing trend or has "staying power". Kelsey Weekman, a reporter for BuzzFeed News, noted that the app's unwillingness to "glamorise the banality of life" made it feel "humbling" in its emphasis on authenticity. Niloufar Haidari for The Guardian comments similarly that where the app succeeds in being "drab" in perhaps a positive way, it fails in potentially "un-inspiring" users. Likewise, Dr. Brad Ridout, a behavioral psychologist at the University of Sydney, emphasizes that the "boring" experience is what the creators are targeting for the app and, in response to Instagram's platform of flawlessness, that "perfection is the enemy of happiness". === Criticisms === Some people regularly post after the two-minute notification expires, leading to some criticism of the app, as the ability to post late undermines its aims of authenticity. In addition, BeReal's daily two-minute window has been argued to contribute to social media fatigue and a need for self-exposure, as well as constant access to phones.

  Read more →