AI Generator Reader

AI Generator Reader — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Visual servoing

  Visual servoing, also known as vision-based robot control and abbreviated VS, is a technique which uses feedback information extracted from a vision sensor (visual feedback) to control the motion of a robot. One of the earliest papers that talks about visual servoing was from the SRI International Labs in 1979. == Visual servoing taxonomy == There are two fundamental configurations of the robot end-effector (hand) and the camera: Eye-in-hand, or end-point open-loop control, where the camera is attached to the moving hand and observing the relative position of the target. Eye-to-hand, or end-point closed-loop control, where the camera is fixed in the world and observing the target and the motion of the hand. Visual Servoing control techniques are broadly classified into the following types: Image-based (IBVS) Position/pose-based (PBVS) Hybrid approach IBVS was proposed by Weiss and Sanderson. The control law is based on the error between current and desired features on the image plane, and does not involve any estimate of the pose of the target. The features may be the coordinates of visual features, lines or moments of regions. IBVS has difficulties with motions very large rotations, which has come to be called camera retreat. PBVS is a model-based technique (with a single camera). This is because the pose of the object of interest is estimated with respect to the camera and then a command is issued to the robot controller, which in turn controls the robot. In this case the image features are extracted as well, but are additionally used to estimate 3D information (pose of the object in Cartesian space), hence it is servoing in 3D. Hybrid approaches use some combination of the 2D and 3D servoing. There have been a few different approaches to hybrid servoing 2-1/2-D Servoing Motion partition-based Partitioned DOF Based == Survey == The following description of the prior work is divided into 3 parts Survey of existing visual servoing methods. Various features used and their impacts on visual servoing. Error and stability analysis of visual servoing schemes. === Survey of existing visual servoing methods === Visual servo systems, also called servoing, have been around since the early 1980s , although the term visual servo itself was only coined in 1987. Visual Servoing is, in essence, a method for robot control where the sensor used is a camera (visual sensor). Servoing consists primarily of two techniques, one involves using information from the image to directly control the degrees of freedom (DOF) of the robot, thus referred to as Image Based Visual Servoing (IBVS). While the other involves the geometric interpretation of the information extracted from the camera, such as estimating the pose of the target and parameters of the camera (assuming some basic model of the target is known). Other servoing classifications exist based on the variations in each component of a servoing system , e.g. the location of the camera, the two kinds are eye-in-hand and hand–eye configurations. Based on the control loop, the two kinds are end-point-open-loop and end-point-closed-loop. Based on whether the control is applied to the joints (or DOF) directly or as a position command to a robot controller the two types are direct servoing and dynamic look-and-move. Being one of the earliest works the authors proposed a hierarchical visual servo scheme applied to image-based servoing. The technique relies on the assumption that a good set of features can be extracted from the object of interest (e.g. edges, corners and centroids) and used as a partial model along with global models of the scene and robot. The control strategy is applied to a simulation of a two and three DOF robot arm. Feddema et al. introduced the idea of generating task trajectory with respect to the feature velocity. This is to ensure that the sensors are not rendered ineffective (stopping the feedback) for any the robot motions. The authors assume that the objects are known a priori (e.g. CAD model) and all the features can be extracted from the object. The work by Espiau et al. discusses some of the basic questions in visual servoing. The discussions concentrate on modeling of the interaction matrix, camera, visual features (points, lines, etc..). In an adaptive servoing system was proposed with a look-and-move servoing architecture. The method used optical flow along with SSD to provide a confidence metric and a stochastic controller with Kalman filtering for the control scheme. The system assumes (in the examples) that the plane of the camera and the plane of the features are parallel., discusses an approach of velocity control using the Jacobian relationship s˙ = Jv˙ . In addition the author uses Kalman filtering, assuming that the extracted position of the target have inherent errors (sensor errors). A model of the target velocity is developed and used as a feed-forward input in the control loop. Also, mentions the importance of looking into kinematic discrepancy, dynamic effects, repeatability, settling time oscillations and lag in response. Corke poses a set of very critical questions on visual servoing and tries to elaborate on their implications. The paper primarily focuses the dynamics of visual servoing. The author tries to address problems like lag and stability, while also talking about feed-forward paths in the control loop. The paper also, tries to seek justification for trajectory generation, methodology of axis control and development of performance metrics. Chaumette in provides good insight into the two major problems with IBVS. One, servoing to a local minima and second, reaching a Jacobian singularity. The author show that image points alone do not make good features due to the occurrence of singularities. The paper continues, by discussing the possible additional checks to prevent singularities namely, condition numbers of J_s and Jˆ+_s, to check the null space of ˆ J_s and J^T_s . One main point that the author highlights is the relation between local minima and unrealizable image feature motions. Over the years many hybrid techniques have been developed. These involve computing partial/complete pose from Epipolar Geometry using multiple views or multiple cameras. The values are obtained by direct estimation or through a learning or a statistical scheme. While others have used a switching approach that changes between image-based and position-based on a Lyapnov function. The early hybrid techniques that used a combination of image-based and pose-based (2D and 3D information) approaches for servoing required either a full or partial model of the object in order to extract the pose information and used a variety of techniques to extract the motion information from the image. used an affine motion model from the image motion in addition to a rough polyhedral CAD model to extract the object pose with respect to the camera to be able to servo onto the object (on the lines of PBVS). 2-1/2-D visual servoing developed by Malis et al. is a well known technique that breaks down the information required for servoing into an organized fashion which decouples rotations and translations. The papers assume that the desired pose is known a priori. The rotational information is obtained from partial pose estimation, a homography, (essentially 3D information) giving an axis of rotation and the angle (by computing the eigenvalues and eigenvectors of the homography). The translational information is obtained from the image directly by tracking a set of feature points. The only conditions being that the feature points being tracked never leave the field of view and that a depth estimate be predetermined by some off-line technique. 2-1/2-D servoing has been shown to be more stable than the techniques that preceded it. Another interesting observation with this formulation is that the authors claim that the visual Jacobian will have no singularities during the motions. The hybrid technique developed by Corke and Hutchinson, popularly called portioned approach partitions the visual (or image) Jacobian into motions (both rotations and translations) relating X and Y axes and motions related to the Z axis. outlines the technique, to break out columns of the visual Jacobian that correspond to the Z axis translation and rotation (namely, the third and sixth columns). The partitioned approach is shown to handle the Chaumette Conundrum discussed in. This technique requires a good depth estimate in order to function properly. outlines a hybrid approach where the servoing task is split into two, namely main and secondary. The main task is keep the features of interest within the field of view. While the secondary task is to mark a fixation point and use it as a reference to bring the camera to the desired pose. The technique does need a depth estimate from an off-line procedure. The paper discusses two examples for which depth estimates are obtained from robot odometry and by assuming that all

  Read more →
• 

  Proximal gradient methods for learning

  Proximal gradient (forward backward splitting) methods for learning is an area of research in optimization and statistical learning theory which studies algorithms for a general class of convex regularization problems where the regularization penalty may not be differentiable. One such example is ℓ 1 {\displaystyle \ell _{1}} regularization (also known as Lasso) of the form min w ∈ R d 1 n ∑ i = 1 n ( y i − ⟨ w , x i ⟩ ) 2 + λ ‖ w ‖ 1 , where x i ∈ R d and y i ∈ R . {\displaystyle \min _{w\in \mathbb {R} ^{d}}{\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-\langle w,x_{i}\rangle )^{2}+\lambda \|w\|_{1},\quad {\text{ where }}x_{i}\in \mathbb {R} ^{d}{\text{ and }}y_{i}\in \mathbb {R} .} Proximal gradient methods offer a general framework for solving regularization problems from statistical learning theory with penalties that are tailored to a specific problem application. Such customized penalties can help to induce certain structure in problem solutions, such as sparsity (in the case of lasso) or group structure (in the case of group lasso). == Relevant background == Proximal gradient methods are applicable in a wide variety of scenarios for solving convex optimization problems of the form min x ∈ H F ( x ) + R ( x ) , {\displaystyle \min _{x\in {\mathcal {H}}}F(x)+R(x),} where F {\displaystyle F} is convex and differentiable with Lipschitz continuous gradient, R {\displaystyle R} is a convex, lower semicontinuous function which is possibly nondifferentiable, and H {\displaystyle {\mathcal {H}}} is some set, typically a Hilbert space. The usual criterion of x {\displaystyle x} minimizes F ( x ) + R ( x ) {\displaystyle F(x)+R(x)} if and only if ∇ ( F + R ) ( x ) = 0 {\displaystyle \nabla (F+R)(x)=0} in the convex, differentiable setting is now replaced by 0 ∈ ∂ ( F + R ) ( x ) , {\displaystyle 0\in \partial (F+R)(x),} where ∂ φ {\displaystyle \partial \varphi } denotes the subdifferential of a real-valued, convex function φ {\displaystyle \varphi } . Given a convex function φ : H → R {\displaystyle \varphi :{\mathcal {H}}\to \mathbb {R} } an important operator to consider is its proximal operator prox φ : H → H {\displaystyle \operatorname {prox} _{\varphi }:{\mathcal {H}}\to {\mathcal {H}}} defined by prox φ ⁡ ( u ) = arg ⁡ min x ∈ H φ ( x ) + 1 2 ‖ u − x ‖ 2 2 , {\displaystyle \operatorname {prox} _{\varphi }(u)=\operatorname {arg} \min _{x\in {\mathcal {H}}}\varphi (x)+{\frac {1}{2}}\|u-x\|_{2}^{2},} which is well-defined because of the strict convexity of the ℓ 2 {\displaystyle \ell _{2}} norm. The proximal operator can be seen as a generalization of a projection. We see that the proximity operator is important because x ∗ {\displaystyle x^{}} is a minimizer to the problem min x ∈ H F ( x ) + R ( x ) {\displaystyle \min _{x\in {\mathcal {H}}}F(x)+R(x)} if and only if x ∗ = prox γ R ⁡ ( x ∗ − γ ∇ F ( x ∗ ) ) , {\displaystyle x^{}=\operatorname {prox} _{\gamma R}\left(x^{}-\gamma \nabla F(x^{})\right),} where γ > 0 {\displaystyle \gamma >0} is any positive real number. === Moreau decomposition === One important technique related to proximal gradient methods is the Moreau decomposition, which decomposes the identity operator as the sum of two proximity operators. Namely, let φ : X → R {\displaystyle \varphi :{\mathcal {X}}\to \mathbb {R} } be a lower semicontinuous, convex function on a vector space X {\displaystyle {\mathcal {X}}} . We define its Fenchel conjugate φ ∗ : X → R {\displaystyle \varphi ^{}:{\mathcal {X}}\to \mathbb {R} } to be the function φ ∗ ( u ) := sup x ∈ X ⟨ x , u ⟩ − φ ( x ) . {\displaystyle \varphi ^{}(u):=\sup _{x\in {\mathcal {X}}}\langle x,u\rangle -\varphi (x).} The general form of Moreau's decomposition states that for any x ∈ X {\displaystyle x\in {\mathcal {X}}} and any γ > 0 {\displaystyle \gamma >0} that x = prox γ φ ⁡ ( x ) + γ prox φ ∗ / γ ⁡ ( x / γ ) , {\displaystyle x=\operatorname {prox} _{\gamma \varphi }(x)+\gamma \operatorname {prox} _{\varphi ^{}/\gamma }(x/\gamma ),} which for γ = 1 {\displaystyle \gamma =1} implies that x = prox φ ⁡ ( x ) + prox φ ∗ ⁡ ( x ) {\displaystyle x=\operatorname {prox} _{\varphi }(x)+\operatorname {prox} _{\varphi ^{}}(x)} . The Moreau decomposition can be seen to be a generalization of the usual orthogonal decomposition of a vector space, analogous with the fact that proximity operators are generalizations of projections. In certain situations it may be easier to compute the proximity operator for the conjugate φ ∗ {\displaystyle \varphi ^{}} instead of the function φ {\displaystyle \varphi } , and therefore the Moreau decomposition can be applied. This is the case for group lasso. == Lasso regularization == Consider the regularized empirical risk minimization problem with square loss and with the ℓ 1 {\displaystyle \ell _{1}} norm as the regularization penalty: min w ∈ R d 1 n ∑ i = 1 n ( y i − ⟨ w , x i ⟩ ) 2 + λ ‖ w ‖ 1 , {\displaystyle \min _{w\in \mathbb {R} ^{d}}{\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-\langle w,x_{i}\rangle )^{2}+\lambda \|w\|_{1},} where x i ∈ R d and y i ∈ R . {\displaystyle x_{i}\in \mathbb {R} ^{d}{\text{ and }}y_{i}\in \mathbb {R} .} The ℓ 1 {\displaystyle \ell _{1}} regularization problem is sometimes referred to as lasso (least absolute shrinkage and selection operator). Such ℓ 1 {\displaystyle \ell _{1}} regularization problems are interesting because they induce sparse solutions, that is, solutions w {\displaystyle w} to the minimization problem have relatively few nonzero components. Lasso can be seen to be a convex relaxation of the non-convex problem min w ∈ R d 1 n ∑ i = 1 n ( y i − ⟨ w , x i ⟩ ) 2 + λ ‖ w ‖ 0 , {\displaystyle \min _{w\in \mathbb {R} ^{d}}{\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-\langle w,x_{i}\rangle )^{2}+\lambda \|w\|_{0},} where ‖ w ‖ 0 {\displaystyle \|w\|_{0}} denotes the ℓ 0 {\displaystyle \ell _{0}} "norm", which is the number of nonzero entries of the vector w {\displaystyle w} . Sparse solutions are of particular interest in learning theory for interpretability of results: a sparse solution can identify a small number of important factors. === Solving for L1 proximity operator === For simplicity we restrict our attention to the problem where λ = 1 {\displaystyle \lambda =1} . To solve the problem min w ∈ R d 1 n ∑ i = 1 n ( y i − ⟨ w , x i ⟩ ) 2 + ‖ w ‖ 1 , {\displaystyle \min _{w\in \mathbb {R} ^{d}}{\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-\langle w,x_{i}\rangle )^{2}+\|w\|_{1},} we consider our objective function in two parts: a convex, differentiable term F ( w ) = 1 n ∑ i = 1 n ( y i − ⟨ w , x i ⟩ ) 2 {\displaystyle F(w)={\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-\langle w,x_{i}\rangle )^{2}} and a convex function R ( w ) = ‖ w ‖ 1 {\displaystyle R(w)=\|w\|_{1}} . Note that R {\displaystyle R} is not strictly convex. Let us compute the proximity operator for R ( w ) {\displaystyle R(w)} . First we find an alternative characterization of the proximity operator prox R ⁡ ( x ) {\displaystyle \operatorname {prox} _{R}(x)} as follows: u = prox R ⁡ ( x ) ⟺ 0 ∈ ∂ ( R ( u ) + 1 2 ‖ u − x ‖ 2 2 ) ⟺ 0 ∈ ∂ R ( u ) + u − x ⟺ x − u ∈ ∂ R ( u ) . {\displaystyle {\begin{aligned}u=\operatorname {prox} _{R}(x)\iff &0\in \partial \left(R(u)+{\frac {1}{2}}\|u-x\|_{2}^{2}\right)\\\iff &0\in \partial R(u)+u-x\\\iff &x-u\in \partial R(u).\end{aligned}}} For R ( w ) = ‖ w ‖ 1 {\displaystyle R(w)=\|w\|_{1}} it is easy to compute ∂ R ( w ) {\displaystyle \partial R(w)} : the i {\displaystyle i} th entry of ∂ R ( w ) {\displaystyle \partial R(w)} is precisely ∂ | w i | = { 1 , w i > 0 − 1 , w i < 0 [ − 1 , 1 ] , w i = 0. {\displaystyle \partial |w_{i}|={\begin{cases}1,&w_{i}>0\\-1,&w_{i}<0\\\left[-1,1\right],&w_{i}=0.\end{cases}}} Using the recharacterization of the proximity operator given above, for the choice of R ( w ) = ‖ w ‖ 1 {\displaystyle R(w)=\|w\|_{1}} and γ > 0 {\displaystyle \gamma >0} we have that prox γ R ⁡ ( x ) {\displaystyle \operatorname {prox} _{\gamma R}(x)} is defined entrywise by ( prox γ R ⁡ ( x ) ) i = { x i − γ , x i > γ 0 , | x i | ≤ γ x i + γ , x i < − γ , {\displaystyle \left(\operatorname {prox} _{\gamma R}(x)\right)_{i}={\begin{cases}x_{i}-\gamma ,&x_{i}>\gamma \\0,&|x_{i}|\leq \gamma \\x_{i}+\gamma ,&x_{i}<-\gamma ,\end{cases}}} which is known as the soft thresholding operator S γ ( x ) = prox γ ‖ ⋅ ‖ 1 ⁡ ( x ) {\displaystyle S_{\gamma }(x)=\operatorname {prox} _{\gamma \|\cdot \|_{1}}(x)} . === Fixed point iterative schemes === To finally solve the lasso problem we consider the fixed point equation shown earlier: x ∗ = prox γ R ⁡ ( x ∗ − γ ∇ F ( x ∗ ) ) . {\displaystyle x^{}=\operatorname {prox} _{\gamma R}\left(x^{}-\gamma \nabla F(x^{})\right).} Given that we have computed the form of the proximity operator explicitly, then we can define a standard fixed point iteration procedure. Namely, fix some initial w 0 ∈ R d {\displaystyle w^{0}\in \mathbb {R} ^{d}} , and for k = 1 , 2 , … {\displaystyle k=1,2,\ldots } define w k + 1 = S γ ( w k − γ ∇ F ( w k ) ) . {\displaystyle w^{k+1}=S_{\gamma }\left(w^{k}-\gamma \nabla F\l

  Read more →
• 

  Situated

  In artificial intelligence and cognitive science, the term situated refers to an agent which is embedded in an environment. The term situated is commonly used to refer to robots, but some researchers argue that software agents can also be situated if: they exist in a dynamic (rapidly changing) environment, which they can manipulate or change through their actions, and which they can sense or perceive. Examples might include web-based agents, which can alter data or trigger processes (such as purchases) over the internet, or virtual-reality bots which inhabit and change virtual worlds, such as Second Life. Being situated is generally considered to be part of being embodied, but it is useful to consider each perspective individually. The situated perspective emphasizes that intelligent behaviour derives from the environment and the agent's interactions with it. The nature of these interactions are defined by an agent's embodiment.

  Read more →
• 

  Multi-task learning

  Multi-task learning (MTL) is a subfield of machine learning in which multiple learning tasks are solved at the same time, while exploiting commonalities and differences across tasks. This can result in improved learning efficiency and prediction accuracy for the task-specific models, when compared to training the models separately. Inherently, Multi-task learning is a multi-objective optimization problem having trade-offs between different tasks. Early versions of MTL were called "hints". In a widely cited 1997 paper, Rich Caruana gave the following characterization:Multitask Learning is an approach to inductive transfer that improves generalization by using the domain information contained in the training signals of related tasks as an inductive bias. It does this by learning tasks in parallel while using a shared representation; what is learned for each task can help other tasks be learned better. In the classification context, MTL aims to improve the performance of multiple classification tasks by learning them jointly. One example is a spam-filter, which can be treated as distinct but related classification tasks across different users. To make this more concrete, consider that different people have different distributions of features which distinguish spam emails from legitimate ones, for example an English speaker may find that all emails in Russian are spam, not so for Russian speakers. Yet there is a definite commonality in this classification task across users, for example one common feature might be text related to money transfer. Solving each user's spam classification problem jointly via MTL can let the solutions inform each other and improve performance. Further examples of settings for MTL include multiclass classification and multi-label classification. Multi-task learning works because regularization induced by requiring an algorithm to perform well on a related task can be superior to regularization that prevents overfitting by penalizing all complexity uniformly. One situation where MTL may be particularly helpful is if the tasks share significant commonalities and are generally slightly under sampled. However, as discussed below, MTL has also been shown to be beneficial for learning unrelated tasks. == Methods == The key challenge in multi-task learning, is how to combine learning signals from multiple tasks into a single model. This may strongly depend on how well different task agree with each other, or contradict each other. There are several ways to address this challenge: === Task grouping and overlap === Within the MTL paradigm, information can be shared across some or all of the tasks. Depending on the structure of task relatedness, one may want to share information selectively across the tasks. For example, tasks may be grouped or exist in a hierarchy, or be related according to some general metric. Suppose, as developed more formally below, that the parameter vector modeling each task is a linear combination of some underlying basis. Similarity in terms of this basis can indicate the relatedness of the tasks. For example, with sparsity, overlap of nonzero coefficients across tasks indicates commonality. A task grouping then corresponds to those tasks lying in a subspace generated by some subset of basis elements, where tasks in different groups may be disjoint or overlap arbitrarily in terms of their bases. Task relatedness can be imposed a priori or learned from the data. Hierarchical task relatedness can also be exploited implicitly without assuming a priori knowledge or learning relations explicitly. For example, the explicit learning of sample relevance across tasks can be done to guarantee the effectiveness of joint learning across multiple domains. === Exploiting unrelated tasks: Auxiliary learning === In auxiliary learning, one attempts learning a group of principal tasks using a group of auxiliary tasks, unrelated to the principal ones. With the right unrelated tasks, joint learning of unrelated tasks which use the same input data have been shown to be beneficial, and provide significant improvement over standard MTL. The reason is that prior knowledge about task relatedness can lead to sparser and more informative representations for each task grouping, essentially by screening out idiosyncrasies of the data distribution. It has been proposed to build on a prior multitask methodology by favoring a shared low-dimensional representation within each task grouping, and imposing a penalty on tasks from different groups which encourages the two representations to be orthogonal. Learning with auxiliary unrelated tasks poses two major challenges: Finding useful auxiliary tasks and combining losses of all tasks in a useful way. Some methods can learn these from data together with the training process, and combine tasks efficiently. === Transfer of knowledge === Related to multi-task learning is the concept of knowledge transfer. Whereas traditional multi-task learning implies that a shared representation is developed concurrently across tasks, transfer of knowledge implies a sequentially shared representation. Large scale machine learning projects such as the deep convolutional neural network GoogLeNet, an image-based object classifier, can develop robust representations which may be useful to further algorithms learning related tasks. For example, the pre-trained model can be used as a feature extractor to perform pre-processing for another learning algorithm. Or the pre-trained model can be used to initialize a model with similar architecture which is then fine-tuned to learn a different classification task. === Multiple non-stationary tasks === Traditionally Multi-task learning and transfer of knowledge are applied to stationary learning settings. Their extension to non-stationary environments is termed Group online adaptive learning (GOAL). Sharing information could be particularly useful if learners operate in continuously changing environments, because a learner could benefit from previous experience of another learner to quickly adapt to their new environment. Such group-adaptive learning has numerous applications, from predicting financial time-series, through content recommendation systems, to visual understanding for adaptive autonomous agents. === Multi-task optimization === Multi-task optimization focuses on solving optimizing the whole process. The paradigm has been inspired by the well-established concepts of transfer learning and multi-task learning in predictive analytics. The key motivation behind multi-task optimization is that if optimization tasks are related to each other in terms of their optimal solutions or the general characteristics of their function landscapes, the search progress can be transferred to substantially accelerate the search on the other. The success of the paradigm is not necessarily limited to one-way knowledge transfers from simpler to more complex tasks. In practice an attempt is to intentionally solve a more difficult task that may unintentionally solve several smaller problems. There is a direct relationship between multitask optimization and multi-objective optimization. In some cases, the simultaneous training of seemingly related tasks may hinder performance compared to single-task models. Commonly, MTL models employ task-specific modules on top of a joint feature representation obtained using a shared module. Since this joint representation must capture useful features across all tasks, MTL may hinder individual task performance if the different tasks seek conflicting representation, i.e., the gradients of different tasks point to opposing directions or differ significantly in magnitude. This phenomenon is commonly referred to as negative transfer. To mitigate this issue, various MTL optimization methods have been proposed. It has been reported that meta-knowledge transfer could help avoid negative transfer.Besides, the per-task gradients are combined into a joint update direction through various aggregation algorithms or heuristics. There are several common approaches for multi-task optimization: Bayesian optimization, evolutionary computation, and approaches based on Game theory. ==== Multi-task Bayesian optimization ==== Multi-task Bayesian optimization is a modern model-based approach that leverages the concept of knowledge transfer to speed up the automatic hyperparameter optimization process of machine learning algorithms. The method builds a multi-task Gaussian process model on the data originating from different searches progressing in tandem. The captured inter-task dependencies are thereafter utilized to better inform the subsequent sampling of candidate solutions in respective search spaces. ==== Evolutionary multi-tasking ==== Evolutionary multi-tasking has been explored as a means of exploiting the implicit parallelism of population-based search algorithms to simultaneously progress multiple distinct optimization tasks. By mapping all task

  Read more →
• 

  Videotex

  Videotex (or interactive videotex) was one of the earliest implementations of an end-user information system. From the late 1970s to early 2010s, it was used to deliver information (usually pages of text) to a user in computer-like format, typically to be displayed on a television or a dumb terminal. In a strict definition, videotex is any system that provides interactive content and displays it on a video monitor such as a television, typically using modems to send data in both directions. A close relative is teletext, which sends data in one direction only, typically encoded in a television signal. All such systems are occasionally referred to as viewdata. Unlike the modern Internet, traditional videotex services were highly centralized. Videotex in its broader definition can be used to refer to any such service, including teletext, the Internet, bulletin board systems, online service providers, and even the arrival/departure displays at an airport. This usage is no longer common. With the exception of Minitel in France, videotex elsewhere never managed to attract any more than a very small percentage of the universal mass market once envisaged. By the end of the 1980s its use was essentially limited to a few niche applications. == Initial development and technologies == === United Kingdom === The first attempts at a general-purpose videotex service were created in the United Kingdom in the late 1960s. In about 1970 the BBC had a brainstorming session in which it was decided to start researching ways to send closed captioning information to the audience. As the Teledata research continued the BBC became interested in using the system for delivering any sort of information, not just closed captioning. In 1972, the concept was first made public under the new name Ceefax. Meanwhile, the General Post Office (soon to become British Telecom) had been researching a similar concept since the late 1960s, known as Viewdata. Unlike Ceefax which was a one-way service carried in the existing TV signal, Viewdata was a two-way system using telephones. Since the Post Office owned the telephones, this was considered to be an excellent way to drive more customers to use the phones. Not to be outdone by the BBC, they also announced their service, under the name Prestel. ITV soon joined the fray with a Ceefax-clone known as ORACLE. In 1974, all the services agreed on a standard for displaying the information. The display would be a simple 40×24 grid of text, with some "graphics characters" for constructing simple graphics, revised and finalized in 1976. The standard did not define the delivery system, so both Viewdata-like and Teledata-like services could at least share the TV-side hardware, which was expensive at the time. The standard also introduced a new term that covered all such services, teletext. Ceefax first started operation in 1974 with a limited 30 pages, followed quickly by ORACLE and then Prestel in 1979. By 1981, Prestel International was available in nine countries, and a number of countries, including Sweden, The Netherlands, Finland and West Germany were developing their own national systems closely based on Prestel. General Telephone and Electronics (GTE) acquired an exclusive agency for the system for North America. In the early 1980s, videotex became the base technology for the London Stock Exchange's pricing service called TOPIC. Later versions of TOPIC, notably TOPIC2 and TOPIC3, were developed by Thanos Vassilakis and introduced trading and historic price feeds. === France === Development of a French teletext-like system began in 1973. A very simple 2-way videotex system called Tictac was also demonstrated in the mid-1970s. As in the UK, this led on to work to develop a common display standard for videotex and teletext, called Antiope, which was finalised in 1977. Antiope had similar capabilities to the UK system for displaying alphanumeric text and chunky "mosaic" character-based block graphics. A difference however was that while in the UK standard control codes automatically also occupied one character position on screen, Antiope allowed for "non spacing" control codes. This gave Antiope slightly more flexibility in the use of colours in mosaic block graphics, and in presenting the accents and diacritics of the French language. Meanwhile, spurred on by the 1978 Nora/Minc report, the French government was determined to catch up on a perceived falling behind in its computer and communications facilities. In 1980 it began field trials issuing Antiope-based terminals for free to over 250,000 telephone subscribers in Ille-et-Vilaine region, where the French CCETT research centre was based, for use as telephone directories. The trial was a success, and in 1982 Minitel was rolled out nationwide. === Canada === Since 1970, researchers at the Communications Research Centre (CRC) in Ottawa had been working on a set of "picture description instructions", which encoded graphics commands as a text stream. Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6 bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a colour display, which was successfully up and running by 1977. Against the background of the developments in Europe, CRC was able to persuade the Canadian government to develop the system into a fully-fledged service. In August 1978, the Canadian Department of Communications publicly launched it as Telidon, a "second generation" videotex/teletext service, and committed to a four-year development plan to encourage rollout. Compared to the European systems, Telidon offered real graphics, as opposed to block-mosaic character graphics. The downside was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors. === Japan === Research in Japan was shaped by the demands of the large number of Kanji characters used in Japanese script. With 1970s technology, the ability to generate so many characters on demand in the end-user's terminal was seen as prohibitive. Instead, development focussed on methods to send pages to user terminals pre-rendered, using coding strategies similar to facsimile machines. This led to a videotex system called Captain ("Character and Pattern Telephone Access Information Network"), created by NTT in 1978, which went into full trials from 1979 to 1981. The system also lent itself naturally to photographic images, albeit at only moderate resolution. However, the pages typically took two or three times longer to load, compared to the European systems. NHK developed an experimental teletext system along similar lines, called CIBS ("Character Information Broadcasting Station"). Based on a 388×200 pixel resolution, it was first announced in 1976, and began trials in late 1978. (NHK's ultimate production teletext system launched in 1983). == Standards == Work to establish an international standard for videotex began in 1978 in CCITT. But the national delegations showed little interest in compromise, each hoping that their system would come to define what was perceived to be going to be an enormous new mass-market. In 1980 CCITT therefore issued recommendation S.100 (later T.100), noting the points of similarity but the essential incompatibility of the systems, and declaring all four to be recognised options. Trying to kick-start the market, AT&T Corporation entered the fray, and in May 1981 announced its own Presentation Layer Protocol (PLP). This was closely based on the Canadian Telidon system, but added to it some further graphics primitives and a syntax for defining macros, algorithms to define cleaner pixel spacing for the (arbitrarily sizeable) text, and also dynamically redefinable characters and a mosaic block graphic character set, so that it could reproduce content from the French Antiope. After some further revisions this was adopted in 1983 as ANSI standard X3.110, more commonly called NAPLPS, the North American Presentation Layer Protocol Syntax. It was also adopted in 1988 as the presentation-layer syntax for NABTS, the North American Broadcast Teletext Specification. Meanwhile, the European national Postal Telephone and Telegraph (PTT) agencies were also increasingly interested in videotex, and had convened discussions in European Conference of Postal and Telecommunications Administrations (CEPT) to co-ordinate developments, which had been diverging along national lines. As well as the British and French standards, the Swedes had proposed extending the British Prestel standard with a new se

  Read more →
• 

  Data-centric AI

  Data-centric AI is an approach within artificial intelligence that emphasizes on improving the quality, consistency and representativeness of the data used to train machine learning models, rather than focusing primarily on optimizing model architectures or algorithms. This idea has gained traction as researchers and practitioners have come to believe that many performance limitations of machine learning systems stem from issues such as noisy labels, biased datasets, and lack of coverage in the data. Data-centric AI involves disciplined approach to data cleaning, augmentation, labeling, and governance that improves model performance and reliability in applications such as computer vision, natural language processing, and further.

  Read more →
• 

  Neurocomputing (journal)

  Neurocomputing is a peer-reviewed scientific journal covering research on artificial intelligence, machine learning, and neural computation. It was established in 1989 and is published by Elsevier. The editor-in-chief is Zidong Wang (Brunel University London). Independent scientometric studies noted that despite being one of the most productive journals in the field, it has kept its reputation across the years intact and plays an important role in leading the research in the area. The journal is abstracted and indexed in Scopus and Science Citation Index Expanded. According to the Journal Citation Reports, its 2023 impact factor is 5.5.

  Read more →
• 

  AI effect

  The AI effect is a phenomenon in which advances in artificial intelligence lead to a redefinition of what is considered intelligence, such that capabilities achieved by AI systems are no longer regarded as examples of "real" intelligence. The concept has been used to describe both a cognitive tendency and a sociotechnical pattern, in which successful AI techniques are reclassified as routine computation or absorbed into other domains. Historian Pamela McCorduck described this as a recurring feature of AI research, noting in her 2004 book Machines Who Think that once a problem is solved, it is no longer considered evidence of intelligence. Researcher Rodney Brooks similarly observed in 2002 that once systems are understood, they are often regarded as "just computation". == Definition == The AI effect refers to a shift in how intelligence is defined as machines acquire new capabilities. Tasks such as playing chess, recognizing speech, or interpreting images were historically considered indicators of intelligence, but after successful automation they are often reclassified as routine computation. McCorduck described this as an "odd paradox", in which successful AI systems are assimilated into other domains, leaving AI researchers to focus on unsolved problems. The phenomenon is often interpreted as an instance of moving the goalposts. A commonly cited formulation is Tesler's theorem, often expressed as "AI is whatever hasn't been done yet". When problems are not fully formalised, they may be described using models involving human computation, such as human-assisted Turing machines. == Historical examples == === Game playing === Early AI systems capable of playing games such as checkers and chess were initially regarded as demonstrations of machine intelligence. As these systems improved and became better understood, their achievements were often reinterpreted as examples of computation rather than intelligence. The victory of IBM's Deep Blue over Garry Kasparov in 1997 is a frequently cited example. Critics argued that the system relied on brute-force methods rather than genuine understanding. === Pattern recognition === Technologies such as optical character recognition and speech recognition were once considered core problems in artificial intelligence. As these systems became reliable and widely deployed, they were increasingly treated as standard engineering solutions. === Integration into applications === Many techniques originally developed within AI research have been incorporated into broader technological systems, including marketing, automation, and software applications. Michael Swaine reported in 2007 that AI advances are often presented as developments in other fields. Marvin Minsky observed that successful AI innovations often evolve into separate disciplines. Nick Bostrom noted in 2006 that widely adopted technologies are often no longer labeled as AI. == Contemporary discussion == The AI effect continues to be discussed in the context of recent advances in machine learning, particularly large language models and other generative AI systems. As these systems have become more widely used, some researchers and commentators have noted that their capabilities are frequently described as statistical or mechanical once understood, rather than as intelligence. A 2016 survey of artificial intelligence also noted that AI systems are increasingly embedded in everyday applications, reinforcing earlier observations that successful AI technologies tend to become normalized and no longer identified as AI. At the same time, the widespread commercial use of artificial intelligence has led to greater visibility of the field, contrasting with earlier periods in which AI techniques were often present but unacknowledged. == Interpretations == === Cognitive bias === Some authors describe the AI effect as a cognitive bias in which expectations of intelligence shift as machines achieve new capabilities. === Sociotechnical perspective === Another interpretation emphasizes how technologies are reclassified over time as they become widespread and commercially successful. === Philosophical debate === Some philosophers argue that reclassification reflects genuine conceptual distinctions rather than bias. == Historical context == During periods such as the AI winter, researchers sometimes avoided the term "artificial intelligence" due to negative perceptions. In the 21st century, however, the term "AI" has become widely used in public discourse and marketing. == Broader implications == The AI effect has been linked to broader questions about human uniqueness and the nature of intelligence. Michael Kearns suggested that people may seek to preserve a special role for humans. Similar patterns have been observed in studies of animal cognition. Herbert A. Simon noted that artificial intelligence can provoke strong emotional reactions.

  Read more →
• 

  DaVinci (software)

  DaVinci was a development tool produced by Incross, which aimed at creating HTML5 mobile applications and media content. It included a jQuery framework and a JavaScript library that enabled developers and designers to craft web applications designed for mobile devices with a user experience similar to native applications. Business applications, games, rich media content, such as HTML5 multi-media magazines, advertisements, and animation, may be produced with the tool. DaVinci was based on standard web technology – including HTML5, CSS3, and JavaScript. == Features == DaVinci comprised DaVinci Studio and DaVinci Animator, which handled application programming and UI design. The tool had a WYSIWYG authoring environment. Open-source libraries, such as KnockOut, JsRender/JsViews, Impress.js, and turn.js, were included in the tool. Other open-source frameworks could also be integrated. The Model View Controller (MVC) and Data Binding in JavaScript could be handled through DaVinci's Data-Set Editor. In this mode, view components and model data could be visually bound, which allowed users to create web applications with server-integrated UI components without coding. Additionally, DaVinci included an N-Screen editor, which automatically adjusted designs and functionalities to fit the screen sizes of various devices, including smartphones, tablet PCs, and TVs. == DaVinci and jQuery == In collaboration with the jQuery Foundation, DaVinci played a significant role in hosting the first jQuery conference in an Asian district, which took place on November 12, 2012, in Seoul, South Korea. The conference showcased how DaVinci could be utilized in application development demonstrations.

  Read more →
• 

  Data preprocessing

  Data preprocessing can refer to manipulation, filtration or augmentation of data before it is analyzed, and is often an important step in the data mining process. Data collection methods are often loosely controlled, resulting in out-of-range values, impossible data combinations, and missing values, amongst other issues. Preprocessing is the process by which unstructured data is transformed into intelligible representations suitable for machine-learning models. This phase of model deals with noise in order to arrive at better and improved results from the original data set which was noisy. This dataset also has some level of missing value present in it. The preprocessing pipeline used can often have large effects on the conclusions drawn from the downstream analysis. Thus, representation and quality of data is necessary before running any analysis. If there is a high proportion of irrelevant and redundant information present or noisy and unreliable data, then knowledge discovery during the training phase may be more difficult. Data preparation and filtering steps can take a considerable amount of processing time. Examples of methods used in data preprocessing include cleaning, instance selection, normalization, one-hot encoding, data transformation, feature extraction and feature selection. == Applications == === Data mining === Data preprocessing allows for the removal of unwanted data with the use of data cleaning, this allows the user to have a dataset to contain more valuable information after the preprocessing stage for data manipulation later in the data mining process. Editing such dataset to either correct data corruption or human error is a crucial step to get accurate quantifiers like true positives, true negatives, false positives and false negatives found in a confusion matrix that are commonly used for a medical diagnosis. Users are able to join data files together and use preprocessing to filter any unnecessary noise from the data which can allow for higher accuracy. Users use Python programming scripts accompanied by the pandas library which gives them the ability to import data from a comma-separated values as a data-frame. The data-frame is then used to manipulate data that can be challenging otherwise to do in Excel. Pandas (software) which is a powerful tool that allows for data analysis and manipulation; which makes data visualizations, statistical operations and much more, a lot easier. Many also use the R programming language to do such tasks as well. The reason why a user transforms existing files into a new one is because of many reasons. Aspects of data preprocessing may include imputing missing values, aggregating numerical quantities and transforming continuous data into categories (data binning). More advanced techniques like principal component analysis and feature selection are working with statistical formulas and are applied to complex datasets which are recorded by GPS trackers and motion capture devices. === Semantic data preprocessing === Semantic data mining is a subset of data mining that specifically seeks to incorporate domain knowledge, such as formal semantics, into the data mining process. Domain knowledge is the knowledge of the environment the data was processed in. Domain knowledge can have a positive influence on many aspects of data mining, such as filtering out redundant or inconsistent data during the preprocessing phase. Domain knowledge also works as constraint. It does this by using working as set of prior knowledge to reduce the space required for searching and acting as a guide to the data. Simply put, semantic preprocessing seeks to filter data using the original environment of said data more correctly and efficiently. There are increasingly complex problems which are asking to be solved by more elaborate techniques to better analyze existing information. Instead of creating a simple script for aggregating different numerical values into a single value, it make sense to focus on semantic based data preprocessing. The idea is to build a dedicated ontology, which explains on a higher level what the problem is about. In regards to semantic data mining and semantic pre-processing, ontologies are a way to conceptualize and formally define semantic knowledge and data. The Protégé (software) is the standard tool for constructing an ontology. In general, the use of ontologies bridges the gaps between data, applications, algorithms, and results that occur from semantic mismatches. As a result, semantic data mining combined with ontology has many applications where semantic ambiguity can impact the usefulness and efficiency of data systems. Applications include the medical field, language processing, banking, and even tutoring, among many more. There are various strengths to using a semantic data mining and ontological based approach. As previously mentioned, these tools can help during the per-processing phase by filtering out non-desirable data from the data set. Additionally, well-structured formal semantics integrated into well designed ontologies can return powerful data that can be easily read and processed by machines. A specifically useful example of this exists in the medical use of semantic data processing. As an example, a patient is having a medical emergency and is being rushed to hospital. The emergency responders are trying to figure out the best medicine to administer to help the patient. Under normal data processing, scouring all the patient’s medical data to ensure they are getting the best treatment could take too long and risk the patients’ health or even life. However, using semantically processed ontologies, the first responders could save the patient’s life. Tools like a semantic reasoner can use ontology to infer the what best medicine to administer to the patient is based on their medical history, such as if they have a certain cancer or other conditions, simply by examining the natural language used in the patient's medical records. This would allow the first responders to quickly and efficiently search for medicine without having worry about the patient’s medical history themselves, as the semantic reasoner would already have analyzed this data and found solutions. In general, this illustrates the incredible strength of using semantic data mining and ontologies. They allow for quicker and more efficient data extraction on the user side, as the user has fewer variables to account for, since the semantically pre-processed data and ontology built for the data have already accounted for many of these variables. However, there are some drawbacks to this approach. Namely, it requires a high amount of computational power and complexity, even with relatively small data sets. This could result in higher costs and increased difficulties in building and maintaining semantic data processing systems. This can be mitigated somewhat if the data set is already well organized and formatted, but even then, the complexity is still higher when compared to standard data processing. Below is a simple a diagram combining some of the processes, in particular semantic data mining and their use in ontology. The diagram depicts a data set being broken up into two parts: the characteristics of its domain, or domain knowledge, and then the actual acquired data. The domain characteristics are then processed to become user understood domain knowledge that can be applied to the data. Meanwhile, the data set is processed and stored so that the domain knowledge can applied to it, so that the process may continue. This application forms the ontology. From there, the ontology can be used to analyze data and process results. Fuzzy preprocessing is another, more advanced technique for solving complex problems. Fuzzy preprocessing and fuzzy data mining make use of fuzzy sets. These data sets are composed of two elements: a set and a membership function for the set which comprises 0 and 1. Fuzzy preprocessing uses this fuzzy data set to ground numerical values with linguistic information. Raw data is then transformed into natural language. Ultimately, fuzzy data mining's goal is to help deal with inexact information, such as an incomplete database. Currently fuzzy preprocessing, as well as other fuzzy based data mining techniques see frequent use with neural networks and artificial intelligence.

  Read more →
• 

  Computer audition

  Computer audition (CA) or machine listening is the general field of study of algorithms and systems for audio interpretation by machines. Since the notion of what it means for a machine to "hear" is very broad and somewhat vague, computer audition attempts to bring together several disciplines that originally dealt with specific problems or had a concrete application in mind. The engineer Paris Smaragdis, interviewed in Technology Review, talks about these systems — "software that uses sound to locate people moving through rooms, monitor machinery for impending breakdowns, or activate traffic cameras to record accidents." Inspired by models of human audition, CA deals with questions of representation, transduction, grouping, use of musical knowledge and general sound semantics for the purpose of performing intelligent operations on audio and music signals by the computer. Technically this requires a combination of methods from the fields of signal processing, auditory modelling, music perception and cognition, pattern recognition, and machine learning, as well as more traditional methods of artificial intelligence for musical knowledge representation. == Applications == Like computer vision versus image processing, computer audition versus audio engineering deals with understanding of audio rather than processing. It also differs from problems of speech understanding by machine since it deals with general audio signals, such as natural sounds and musical recordings. Applications of computer audition are widely varying, and include search for sounds, genre recognition, acoustic monitoring, music transcription, score following, audio texture, music improvisation, emotion in audio and so on. == Related disciplines == Computer Audition overlaps with the following disciplines: Music information retrieval: methods for search and analysis of similarity between music signals. Auditory scene analysis: understanding and description of audio sources and events. Computational musicology and mathematical music theory: use of algorithms that employ musical knowledge for analysis of music data. Computer music: use of computers in creative musical applications. Machine musicianship: audition driven interactive music systems. == Areas of study == Since audio signals are interpreted by the human ear–brain system, that complex perceptual mechanism should be simulated somehow in software for "machine listening". In other words, to perform on par with humans, the computer should hear and understand audio content much as humans do. Analyzing audio accurately involves several fields: electrical engineering (spectrum analysis, filtering, and audio transforms); artificial intelligence (machine learning and sound classification); psychoacoustics (sound perception); cognitive sciences (neuroscience and artificial intelligence); acoustics (physics of sound production); and music (harmony, rhythm, and timbre). Furthermore, audio transformations such as pitch shifting, time stretching, and sound object filtering, should be perceptually and musically meaningful. For best results, these transformations require perceptual understanding of spectral models, high-level feature extraction, and sound analysis/synthesis. Finally, structuring and coding the content of an audio file (sound and metadata) could benefit from efficient compression schemes, which discard inaudible information in the sound. Computational models of music and sound perception and cognition can lead to a more meaningful representation, a more intuitive digital manipulation and generation of sound and music in musical human-machine interfaces. The study of CA could be roughly divided into the following sub-problems: Representation: signal and symbolic. This aspect deals with time-frequency representations, both in terms of notes and spectral models, including pattern playback and audio texture. Feature extraction: sound descriptors, segmentation, onset, pitch and envelope detection, chroma, and auditory representations. Musical knowledge structures: analysis of tonality, rhythm, and harmonies. Sound similarity: methods for comparison between sounds, sound identification, novelty detection, segmentation, and clustering. Sequence modeling: matching and alignment between signals and note sequences. Source separation: methods of grouping of simultaneous sounds, such as multiple pitch detection and time-frequency clustering methods. Auditory cognition: modeling of emotions, anticipation and familiarity, auditory surprise, and analysis of musical structure. Multi-modal analysis: finding correspondences between textual, visual, and audio signals. === Representation issues === Computer audition deals with audio signals that can be represented in a variety of fashions, from direct encoding of digital audio in two or more channels to symbolically represented synthesis instructions. Audio signals are usually represented in terms of analogue or digital recordings. Digital recordings are samples of acoustic waveform or parameters of audio compression algorithms. One of the unique properties of musical signals is that they often combine different types of representations, such as graphical scores and sequences of performance actions that are encoded as MIDI files. Since audio signals usually comprise multiple sound sources, then unlike speech signals that can be efficiently described in terms of specific models (such as source-filter model), it is hard to devise a parametric representation for general audio. Parametric audio representations usually use filter banks or sinusoidal models to capture multiple sound parameters, sometimes increasing the representation size in order to capture internal structure in the signal. Additional types of data that are relevant for computer audition are textual descriptions of audio contents, such as annotations, reviews, and visual information in the case of audio-visual recordings. === Features === Description of contents of general audio signals usually requires extraction of features that capture specific aspects of the audio signal. Generally speaking, one could divide the features into signal or mathematical descriptors such as energy, description of spectral shape etc., statistical characterization such as change or novelty detection, special representations that are better adapted to the nature of musical signals or the auditory system, such as logarithmic growth of sensitivity (bandwidth) in frequency or octave invariance (chroma). Since parametric models in audio usually require very many parameters, the features are used to summarize properties of multiple parameters in a more compact or salient representation. === Musical knowledge === Finding specific musical structures is possible by using musical knowledge as well as supervised and unsupervised machine learning methods. Examples of this include detection of tonality according to distribution of frequencies that correspond to patterns of occurrence of notes in musical scales, distribution of note onset times for detection of beat structure, distribution of energies in different frequencies to detect musical chords and so on. === Sound similarity and sequence modeling === Comparison of sounds can be done by comparison of features with or without reference to time. In some cases an overall similarity can be assessed by close values of features between two sounds. In other cases when temporal structure is important, methods of dynamic time warping need to be applied to "correct" for different temporal scales of acoustic events. Finding repetitions and similar sub-sequences of sonic events is important for tasks such as texture synthesis and machine improvisation. === Source separation === Since one of the basic characteristics of general audio is that it comprises multiple simultaneously sounding sources, such as multiple musical instruments, people talking, machine noises or animal vocalization, the ability to identify and separate individual sources is very desirable. Unfortunately, there are no methods that can solve this problem in a robust fashion. Existing methods of source separation rely sometimes on correlation between different audio channels in multi-channel recordings. The ability to separate sources from stereo signals requires different techniques than those usually applied in communications where multiple sensors are available. Other source separation methods rely on training or clustering of features in mono recording, such as tracking harmonically related partials for multiple pitch detection. Some methods, before explicit recognition, rely on revealing structures in data without knowing the structures (like recognizing objects in abstract pictures without attributing them meaningful labels) by finding the least complex data representations, for instance describing audio scenes as generated by a few tone patterns and their trajectories (polyphonic voices) and acoustical contours drawn by a tone (c

  Read more →
• 

  Human-in-the-loop

  Human-in-the-loop (HITL) is used in multiple contexts. It can be defined as a model requiring human interaction. HITL is associated with modeling and simulation (M&S) in the live, virtual, and constructive taxonomy. HITL, along with the related human-on-the-loop, are also used in relation to lethal autonomous weapons. Further, HITL is used in the context of machine learning.It is also used in conversational AI to manage complex interactions that require human empathy. == Machine learning == In machine learning, HITL is used in the sense of humans aiding the computer in making the correct decisions in building a model. HITL improves machine learning over random sampling by selecting the most critical data needed to refine the model. == Simulation == In simulation, HITL models may conform to human factors requirements as in the case of a mockup. In this type of simulation, a human is always part of the simulation and consequently influences the outcome in such a way that is difficult if not impossible to reproduce exactly. HITL also readily allows for the identification of problems and requirements that may not be easily identified by other means of simulation. HITL is often referred to as an interactive simulation, which is a special kind of physical simulation in which physical simulations include human operators, such as in a flight or a driving simulator. === Benefits === Human-in-the-loop allows the user to change the outcome of an event or process. The immersion effectively contributes to a positive transfer of acquired skills into the real world. This can be demonstrated by trainees utilizing flight simulators in preparation to become pilots. HITL also allows for the acquisition of knowledge regarding how a new process may affect a particular event. Utilizing HITL allows participants to interact with realistic models and attempt to perform as they would in an actual scenario. HITL simulations bring to the surface issues that would not otherwise be apparent until after a new process has been deployed. A real-world example of HITL simulation as an evaluation tool is its usage by the Federal Aviation Administration (FAA) to allow air traffic controllers to test new automation procedures by directing the activities of simulated air traffic while monitoring the effect of the newly implemented procedures. As with most processes, there is always the possibility of human error, which can only be reproduced using HITL simulation. Although much can be done to automate systems, humans typically still need to take the information provided by a system to determine the next course of action based on their judgment and experience. Intelligent systems can only go so far in certain circumstances to automate a process; only humans in the simulation can accurately judge the final design. Tabletop simulation may be useful in the very early stages of project development for the purpose of collecting data to set broad parameters, but the important decisions require human-in-the-loop simulation. HITL reflects scenarios where human input remains essential despite advances in automation. === Within the virtual simulation taxonomy === Virtual simulations inject HITL in a central role by exercising motor control skills (e.g. flying an airplane), decision making skills (e.g. committing fire control resources to action), or communication skills (e.g. as members of a C4I team). === Examples === Flight simulators Driving simulators Marine simulators Video games Supply chain management simulators Digital puppetry === Misconceptions === Although human-in-the-loop simulation can include a computer simulation in the form of a synthetic environment, computer simulation is not necessarily a form of human-in-the-loop simulation, and is often considered as human-out-of-the loop simulation. In this particular case, a computer model’s behavior is modified according to a set of initial parameters. The results of the model differ from the results stemming from a true human-in-the-loop simulation because the results can easily be replicated time and time again, by simply providing identical parameters. == Weapons == === Taxonomy === Three classifications of the degree of human control of autonomous weapon systems were laid out by Bonnie Docherty in a 2012 Human Rights Watch report. human-in-the-loop: a human must instigate the action of the weapon (in other words not fully autonomous) human-on-the-loop: a human may abort an action human-out-of-the-loop: no human action is involved === Positive human action === In discussions of autonomous weapons and nuclear command and control, the phrase positive human action has been used alongside "human-in-the-loop" to emphasize that a human operator must affirmatively authorize the use of force. Descriptions of the United States Navy's Aegis Combat System have used the phrase in characterizing a requirement for affirmative human action to initiate live firing. A survey of autonomous weapons systems described the Aegis "Auto SM" mode as one in which "the system fully develops the engagement process however engagement requires positive human action". The phrase entered United States federal law in the National Defense Authorization Act for Fiscal Year 2025, which stipulates that artificial intelligence systems not compromise "the principle of requiring positive human actions in execution of decisions by the President with respect to the employment of nuclear weapons".

  Read more →
• 

  System integrity

  In telecommunications, the term system integrity has the following meanings: That condition of a system wherein its mandated operational and technical parameters are within the prescribed limits. The quality of an AIS when it performs its intended function in an unimpaired manner, free from deliberate or inadvertent unauthorized manipulation of the system. The state that exists when there is complete assurance that under all conditions an IT system is based on the logical correctness and reliability of the operating system, the logical completeness of the hardware and software that implement the protection mechanisms, and data integrity.

  Read more →
• 

  Intelligent decision support system

  An intelligent decision support system (IDSS) is a decision support system that makes extensive use of artificial intelligence (AI) techniques. Use of AI techniques in management information systems has a long history – indeed terms such as "Knowledge-based systems" (KBS) and "intelligent systems" have been used since the early 1980s to describe components of management systems, but the term "Intelligent decision support system" is thought to originate with Clyde Holsapple and Andrew Whinston in the late 1970s. Examples of specialized intelligent decision support systems include Flexible manufacturing systems (FMS), intelligent marketing decision support systems and medical diagnosis systems. Ideally, an intelligent decision support system should behave like a human consultant: supporting decision makers by gathering and analysing evidence, identifying and diagnosing problems, proposing possible courses of action and evaluating such proposed actions. The aim of the AI techniques embedded in an intelligent decision support system is to enable these tasks to be performed by a computer, while emulating human capabilities as closely as possible. Many IDSS implementations are based on expert systems, a well established type of KBS that encode knowledge and emulate the cognitive behaviours of human experts using predicate logic rules, and have been shown to perform better than the original human experts in some circumstances. Expert systems emerged as practical applications in the 1980s based on research in artificial intelligence performed during the late 1960s and early 1970s. They typically combine knowledge of a particular application domain with an inference capability to enable the system to propose decisions or diagnoses. Accuracy and consistency can be comparable to (or even exceed) that of human experts when the decision parameters are well known (e.g. if a common disease is being diagnosed), but performance can be poor when novel or uncertain circumstances arise. Research in AI focused on enabling systems to respond to novelty and uncertainty in more flexible ways is starting to be used in IDSS. For example, intelligent agents that perform complex cognitive tasks without any need for human intervention have been used in a range of decision support applications. Capabilities of these intelligent agents include knowledge sharing, machine learning, data mining, and automated inference. A range of AI techniques such as case based reasoning, rough sets and fuzzy logic have also been used to enable decision support systems to perform better in uncertain conditions. A 2009 research about a multi-artificial system intelligence system named IILS is proposed to automate problem-solving processes within the logistics industry. The system involves integrating intelligence modules based on case-based reasoning, multi-agent systems, fuzzy logic, and artificial neural networks aiming to offer advanced logistics solutions and support in making well-informed, high-quality decisions to address a wide range of customer needs and challenges.

  Read more →
• 

  United States Tech Force

  The U.S. Tech Force (also styled as US Tech Force, Tech Force, or Government Tech Force) is a federal hiring initiative launched by the second Donald Trump administration in December 2025. The program, administered by the Office of Personnel Management (OPM), aims to recruit about 1,000 early-career technology professionals into two-year government jobs to modernize federal IT systems, advance artificial intelligence (AI) capabilities, and address technological gaps in government operations. The initiative is an effort to plug capability gaps created by Trump-administration efforts to shrink the federal government, which led to the departure of some 220,000 federal employees, including many in IT. The initiative seeks early-career workers; officials said it would offer competitive salaries and opportunities to work on high-impact government technology projects. Major technology companies—including Amazon, Apple, Microsoft, Nvidia, Meta, Google, and OpenAI—agreed to help identify and refer candidates. Candidates are allowed to take Tech Force positions on leaves of absence and without divesting their stock, raising conflict-of-interest questions. In January 2026, OPM direction Scott Kupor said the deadline for applying to Tech Force was being extended because of "tremendous interest" without saying how many people had actually applied. Also in December 2025, news broke that the administration is planning another novel use of private-sector workers: hiring cybersecurity firms for offensive cyber operations.

  Read more →