AI Generator Questions

AI Generator Questions — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • NIS2 Directive

    NIS2 Directive

    The Directive (EU) 2022/2555, commonly known as NIS2 is a directive of the European Union aimed at protecting digital infrastructure, in particular critical infrastructure. It broadened the sectors covered by EU network and information security rules and updated incident reporting and oversight compared to the NIS1. Member States were required to transpose NIS2 by 17 October 2024, and the earlier NIS Directive was repealed on 18 October 2024. Only 23 Member States have fully implemented the measures contained with the NIS Directive. Infringement proceedings against them to enforce the Directive have not taken place, and they are not expected to take place in the near future. This failed implementation has led to the fragmentation of cybersecurity capabilities across the EU, with differing standards, incident reporting requirements and enforcement requirements being implemented in different Member States. From the EFTA countries (to April 2026) only Liechtenstein has fully transposed the NIS2 Directive. While the EFTA commission is conducting preparations to transpose the directive into its legislation. == National implementations == === Czech Republic === It is implemented through the Act No. 264/2025 Coll. also called Zákon o kybernetické bezpečnosti (Cybersecurity law) and through another five implementing regulations. The transposing legislation came into force on November 1st, 2025. === Germany === It is implemented through the Gesetz zur Umsetzung der NIS-2-Richtlinie und zur Regelung wesentlicher Grundzüge des Informationssicherheitsmanagements in der Bundesverwaltung. === Ireland === It is implemented through the National Cyber Security Bill. === The Netherlands === It is implemented through the Cyberbeveiligingswet (Cbw). === Slovakia === It is implemented through via an amendment of the Act No. 69/2018 Coll. also called Zákon o kybernetickej bezpečnosti a o zmene a doplnení niektorých zákonov (Law on Cybersecurity and change and amendment of certain laws). It came into force on November 1st, 2025. === Spain === It is implemented through the Esquema Nacional de Seguridad (ENS).

    Read more →
  • Artificial intelligence in spirituality

    Artificial intelligence in spirituality

    Some users of artificial intelligence (AI) technologies, especially chatbots, may develop beliefs that AI has or can attain supernatural or spiritual powers. AI models such as ChatGPT are turned to for fortune telling, mysticism and remote viewing. Recent and sudden advances in large language models have led to folk myths about their origin or capabilities, as well as their deification or worship by some users. Tucker Carlson has made similar claims, including directly to Sam Altman. Pope Leo XIV advised priests against using LLM models when it came to the creation of sermons.

    Read more →
  • Quantum machine learning

    Quantum machine learning

    Quantum machine learning (QML) is the study of quantum algorithms for machine learning. It often refers to quantum algorithms for machine learning tasks which analyze classical data, sometimes called quantum-enhanced machine learning. QML algorithms use qubits and quantum operations to try to improve the space and time complexity of classical machine learning algorithms. Hybrid QML methods involve both classical and quantum processing, where computationally difficult subroutines are outsourced to a quantum device. These routines can be more complex in nature and executed faster on a quantum computer. Furthermore, quantum algorithms can be used to analyze quantum states instead of classical data. The term "quantum machine learning" is sometimes used to refer classical machine learning methods applied to data generated from quantum experiments (i.e. machine learning of quantum systems), such as learning the phase transitions of a quantum system or creating new quantum experiments. QML also extends to a branch of research that explores methodological and structural similarities between certain physical systems and learning systems, in particular neural networks. For example, some mathematical and numerical techniques from quantum physics are applicable to classical deep learning and vice versa. Furthermore, researchers investigate more abstract notions of learning theory with respect to quantum information, sometimes referred to as "quantum learning theory". == Machine learning with quantum computers == Quantum-enhanced machine learning refers to quantum algorithms that solve tasks in machine learning, thereby improving and often expediting classical machine learning techniques. Such algorithms typically require one to encode the given classical data set into a quantum computer to make it accessible for quantum information processing. Subsequently, quantum information processing routines are applied and the result of the quantum computation is read out by measuring the quantum system. For example, the outcome of the measurement of a qubit reveals the result of a binary classification task. While many proposals of QML algorithms are still purely theoretical and require a full-scale universal quantum computer to be tested, others have been implemented on small-scale or special purpose quantum devices. === Quantum associative memories and quantum pattern recognition === Early work on quantum associative memories has been done by Dan Ventura and Tony Martinez and by Carlo A. Trugenberger in the late 1990s and early 2000s. Associative (or content-addressable) memories are able to recognize stored content on the basis of a similarity measure, while random access memories are accessed by the address of stored information and not its content. As such they must be able to retrieve both incomplete and corrupted patterns, the essential machine learning task of pattern recognition. Typical classical associative memories store p patterns in the O ( n 2 ) {\displaystyle O(n^{2})} interactions (synapses) of a real, symmetric energy matrix over a network of n artificial neurons. The encoding is such that the desired patterns are local minima of the energy functional and retrieval is done by minimizing the total energy, starting from an initial configuration. Unfortunately, classical associative memories are severely limited by the phenomenon of cross-talk. When too many patterns are stored, spurious memories appear which quickly proliferate, so that the energy landscape becomes disordered and no retrieval is anymore possible. The number of storable patterns is typically limited by a linear function of the number of neurons, p ≤ O ( n ) {\displaystyle p\leq O(n)} . Quantum associative memories (in their simplest realization) store patterns in a unitary matrix U acting on the Hilbert space of n qubits. Retrieval is realized by the unitary evolution of a fixed initial state to a quantum superposition of the desired patterns with probability distribution peaked on the most similar pattern to an input. By its very quantum nature, the retrieval process is thus probabilistic. Because quantum associative memories are free from cross-talk, however, spurious memories are never generated. Correspondingly, they have a superior capacity than classical ones. The number of parameters in the unitary matrix U is O ( p n ) {\displaystyle O(pn)} . One can thus have efficient, spurious-memory-free quantum associative memories for any polynomial number of patterns. If the matrix U is encoded as a unique operator (as opposed as to a sequence of gates as in the circuit model), e.g. by an optical interferometer, the retrieval becomes efficient even for an exponential number of patterns. === Linear algebra simulation with quantum amplitudes === A number of quantum algorithms for machine learning are based on the idea of amplitude encoding, that is, to associate the amplitudes of a quantum state with the inputs and outputs of computations. Since a state of n {\displaystyle n} qubits is described by 2 n {\displaystyle 2^{n}} complex amplitudes, this information encoding can allow for an exponentially compact representation. Intuitively, this corresponds to associating a discrete probability distribution over binary random variables with a classical vector. The goal of algorithms based on amplitude encoding is to formulate quantum algorithms whose resources grow polynomially in the number of qubits n {\displaystyle n} , which amounts to a logarithmic time complexity in the number of amplitudes and thereby the dimension of the input. Many QML algorithms in this category are based on variations of the quantum algorithm for linear systems of equations (colloquially called HHL, after the paper's authors) which, under specific conditions, performs a matrix inversion using an amount of physical resources growing only logarithmically in the dimensions of the matrix. One of these conditions is that a Hamiltonian which entry-wise corresponds to the matrix can be simulated efficiently, which is known to be possible if the matrix is sparse or low rank. For reference, any known classical algorithm for matrix inversion requires a number of operations that grows more than quadratically in the dimension of the matrix (e.g. O ( n 2.373 ) {\displaystyle O{\mathord {\left(n^{2.373}\right)}}} ), but they are not restricted to sparse matrices. Quantum matrix inversion can be applied to machine learning methods in which the training reduces to solving a linear system of equations, for example in least-squares linear regression, the least-squares version of support vector machines, and Gaussian processes. A crucial bottleneck of methods that simulate linear algebra computations with the amplitudes of quantum states is state preparation, which often requires one to initialise a quantum system in a state whose amplitudes reflect the features of the entire dataset. Although efficient methods for state preparation are known for specific cases, this step easily hides the complexity of the task. === Variational quantum algorithms (VQAs) === In a variational quantum algorithm, a classical computer optimizes the parameters used to prepare a quantum state, while a quantum computer is used to do the actual state preparation and measurement. VQAs are considered promising candidates for noisy intermediate-scale quantum computers. Variational quantum circuits (or parameterized quantum circuits) are a popular class of VQAs where the parameters are those used in a fixed quantum circuit. Researchers have studied VQCs to solve optimization problems and find the ground state energy of complex quantum systems, which were difficult to solve using a classical computer. === Quantum binary classifier === Pattern reorganization is one of the important tasks of machine learning, binary classification is one of the tools or algorithms to find patterns. Binary classification is used in supervised learning and in unsupervised learning. In QML, classical bits are converted to qubits and they are mapped to Hilbert space; complex value data are used in a quantum binary classifier to use the advantage of Hilbert space. By exploiting the quantum mechanic properties such as superposition, entanglement, interference the quantum binary classifier produces the accurate result in short period of time. === Quantum machine learning algorithms based on Grover search === Another approach to improving classical machine learning with quantum information processing uses amplitude amplification methods based on Grover's search algorithm, which has been shown to solve unstructured search problems with a quadratic speedup compared to classical algorithms. These quantum routines can be employed for learning algorithms that translate into an unstructured search task, as can be done, for instance, in the case of the k-medians and the k-nearest neighbors algorithms. Other applications include quadratic speedups in the training of perceptrons. An e

    Read more →
  • Agent verification

    Agent verification

    Agent verification is activity to gain assurances that purposeful artificial constructs act in accordance with their specifications. While primitive forms of inorganic agents have been used in manufacturing for centuries, the study of artificial agents did not begin until the mid 20th century. Foundational work on such agents was closely bound with the emergence of artificial intelligence as an academic discipline. Early agents deployed for industrial control systems and in computing were often controlled by quite simple logic however, not involving artificial intelligence as such. When deployed as part of a multi-agent system, even such simple agents could require special agent orientated testing methods, as their collective behaviour was challenging to verify with traditional testing techniques. Difficulties in providing assurances that agents will not behave in dangerous ways became more prevalent after the introduction of LLM agents, especially after the rapid acceleration of their deployment in 2025. The verification of agent behaviour can be conducted by formal or informal methods. Informal verification requires less mathematical skill. But when agents are part of systems where errors have significant risks — such as danger to human life, environmental damage or major financial loss — formal verification is preferred. Both regulators and system designers themselves like formal verification as it provides a high degree of mathematical certainty. It is not however always possible to formally test all aspects of an agent based system's behaviour, especially where newer LLM based agents are concerned, due in part to their high degree of autonomy. Accordingly, agent verification for low impact deployments might be carried out only with informal methods, while for high impact deployments, it may be performed with a mix of formal and informal techniques. == Terminology == In academia, the term agent verification is often defined to mean activity concerned with gaining assurance that the agent behaves in accordance with its specification - whether by processes such as testing or simulation. 'Verification' is typically contrasted with 'validation', the latter meaning activity concerned with checking that the specification itself meets user or real world needs. Such definitions are not universally adhered to however - for example, in some workplaces and documents, the words 'verification' and 'validation' can be used synonymously. Efforts to gain confidence in Agents have intensified sharply since 2025 due to the rapid roll out of LLM agents; different terms are sometimes used in the commercial sector. Here the term 'agent verification' can be used in the same sense as it is in academia, but sometimes the same activity can be covered by more ambiguous and wider ranging terms such as 'Agent governance' , 'Agent observability' or 'AI agent policing'. == History == === Classical agents === The theoretical underpinnings for artificial (inorganic) agents emerged in the mid 20th century, with establishment of cybernetics and artificial intelligence. Oliver Selfridge's 1958 Pandemonium - A Paradigm for Learning paper was an important early theoretical contribution in establishing agent oriented architecture. Practical implementations of agents for real world applications began to become widespread in the 1990s, after the introduction of the belief–desire–intention software model (BDI), and agent-oriented programming. Pure digital agents were deployed in computer infrastructure for purposes such as monitoring, while agents connected to real-world sensors and actuators were increasingly used in industrial control systems. While the concept of artificial agents was interwoven with early artificial intelligence studies right from the start, early agents lacked general purpose reasoning capabilities, often only having simple if then logic. Even a device as simple as a thermostat, which has a sensor and a means of acting, can be considered a proto agent in this sense. Verifying the behaviours of a simple single agent system is not generally especially difficult, but it can be a different matter when several simple agents coexist in the same system. Craig Reynolds's work on boids showed that relatively complex, "intelligent" behaviour can emerge from a number of such simple agents working together in a Multi-agent system (MAS). By the 1990s, even the behaviour of a single agent system could sometimes be quite complex; in accordance with the Belief–desire–intention software model, agents could have believes that might evolve over time. Agents were increasingly introduced that were controlled by quite large decision tree models, which had new vulnerabilities to adversarial attack. It was becoming increasingly apparent that traditional software verification methods had limitations for testing such agents, or even for the more primitive type of agents when they were deployed as part of a MAS. It was the use of agents for industrial control systems, sometimes associated with robotics, that lent urgency to the practice of agent verification. Informal testing might be acceptable for digital agents used say to monitor whether each of an organisation's computers are properly licensed. But with an increasing potential for faulty agents to result in a failure that might cause a large fire to break out at a chemical manufacturing plant, a botched medical operation, or even a crashed aircraft, the need to develop reliable means of verifying behaviour of such agents was considered urgent. The Foundation for Intelligent Physical Agents was established in 1996. From the late 90s, a growing number of industry and university based scientists began working on the problem, with researchers publishing papers on the verification of both single and multi agent systems. Much of this work showed how formal verification techniques like model checking could be used to gain a high level of assurance that agent based systems would conform with their specification. A 2018 systematic review covering 231 studies found that model checking was the most common technique for agent verification, with theorem proving the second most commonly used formal verification method. In the first two decades of the 20th century, agents run by AI became more common, with Siri and Alexa being well known examples. But such agents still lacked general reasoning capabilities and did not pose new pressing problems for agent verification. === General purpose reasoning agents === The advent of LLMs created huge potential for further use of artificial agents, as agents based on them could have general purpose cognitive abilities. Agents run by LLMs (and occasionally non-LLM foundation models) have similar vulnerability to adversarial attack as those run by decision tree models. The wider scope of actions for LLM agents has created new challenges for their verification, over and above those present for classical agents. For example, the LLM's neural network endows it with infinite domains, an especial challenge for traditional formal verification techniques. Academics began to study the problems involved in verifying LLM agents from 2018. Deployment of such agents began to accelerate in late 2023 after OpenAI's "function-calling" API was made available, and especially after Anthropic's late 2024 introduction of Model Context Protocol (MCP), a standardised way for LLM agents to gain contextual awareness, and to act on the world by calling various external tools. The rapid rollout of LLM agents following MCP's release has seen the task of agent verification receive increased attention within academia, and also from the private sector. In 2024 and 2025 several startups focusing on LLM agent verification have been founded in both Europe and the US to meet growing demand. == Approaches == === Formal verification === Formal verification involves proving the correctness of some or all aspects of a system using mathematical methods. Such methods can range from manual formal proof, to verification assisted with automated theorem provers like Isabelle. For agent verification, model checking is by far the most frequently used formal verification method; for pre-LLM models it was often complemented with techniques using computation tree logic. Another common method is theorem proving. Formal verification provides a higher degree of confidence than informal methods, but it is not always used, even when it is possible. Sometimes a person or organisation developing software agents won't have the necessary skills, or may not see it as worth the effort if the agent(s) will not have the ability to cause much harm even if they malfunction. When agents are deployed in systems where errors could have serious consequences, the ability of formal verification methods to provide mathematical certainty tends to be strongly preferred by both regulators and designers themselves. But even for high impact systems, formal verificatio

    Read more →
  • Labeled data

    Labeled data

    Labeled data is a group of samples that have been tagged with one or more labels. Labeling typically takes a set of unlabeled data and augments each piece of it with informative tags called judgments. For example, a data label might indicate whether a photo contains a horse or a cow, which words were uttered in an audio recording, what type of action is being performed in a video, what the topic of a news article is, what the overall sentiment of a tweet is, or whether a dot in an X-ray is a tumor. Labels can be obtained by having humans make judgments about a given piece of unlabeled data. Labeled data is significantly more expensive to obtain than the raw unlabeled data. The quality of labeled data directly influences the performance of supervised machine learning models in operation, as these models learn from the provided labels. == Crowdsourced labeled data == In 2006, Fei-Fei Li, the co-director of the Stanford Human-Centered AI Institute, initiated research to improve the artificial intelligence models and algorithms for image recognition by significantly enlarging the training data. The researchers downloaded millions of images from the World Wide Web and a team of undergraduates started to apply labels for objects to each image. In 2007, Li outsourced the data labeling work on Amazon Mechanical Turk, an online marketplace for digital piece work. The 3.2 million images that were labeled by more than 49,000 workers formed the basis for ImageNet, one of the largest hand-labeled database for outline of object recognition. == Automated data labelling == After obtaining a labeled dataset, machine learning models can be applied to the data so that new unlabeled data can be presented to the model and a likely label can be guessed or predicted for that piece of unlabeled data. == Challenges == === Data-driven bias === Algorithmic decision-making is subject to programmer-driven bias as well as data-driven bias. Training data that relies on bias labeled data will result in prejudices and omissions in a predictive model, despite the machine learning algorithm being legitimate. The labeled data used to train a specific machine learning algorithm needs to be a statistically representative sample to not bias the results. For example, in facial recognition systems underrepresented groups are subsequently often misclassified if the labeled data available to train has not been representative of the population,. In 2018, a study by Joy Buolamwini and Timnit Gebru demonstrated that two facial analysis datasets that have been used to train facial recognition algorithms, IJB-A and Adience, are composed of 79.6% and 86.2% lighter skinned humans respectively. === Human error and inconsistency === Human annotators are prone to errors and biases when labeling data. This can lead to inconsistent labels and affect the quality of the data set. The inconsistency can affect the machine learning model's ability to generalize well. === Domain expertise === Certain fields, such as legal document analysis or medical imaging, require annotators with specialized domain knowledge. Without the expertise, the annotations or labeled data may be inaccurate, negatively impacting the machine learning model's performance in a real-world scenario.

    Read more →
  • Argumentation framework

    Argumentation framework

    In artificial intelligence and related fields, an argumentation framework is a way to deal with contentious information and draw conclusions from it using formalized arguments. In an abstract argumentation framework, entry-level information is a set of abstract arguments that, for instance, represent data or a proposition. Conflicts between arguments are represented by a binary relation on the set of arguments. In concrete terms, an argumentation framework is represented with a directed graph such that the nodes are the arguments, and the arrows represent the attack relation. There exist some extensions of the Dung's framework, like the logic-based argumentation frameworks or the value-based argumentation frameworks. == Abstract argumentation frameworks == === Formal framework === Abstract argumentation frameworks, also called argumentation frameworks à la Dung, are defined formally as a pair: A set of abstract elements called arguments, denoted A {\displaystyle A} A binary relation on A {\displaystyle A} , called attack relation, denoted R {\displaystyle R} For instance, the argumentation system S = ⟨ A , R ⟩ {\displaystyle S=\langle A,R\rangle } with A = { a , b , c , d } {\displaystyle A=\{a,b,c,d\}} and R = { ( a , b ) , ( b , c ) , ( d , c ) } {\displaystyle R=\{(a,b),(b,c),(d,c)\}} contains four arguments ( a , b , c {\displaystyle a,b,c} and d {\displaystyle d} ) and three attacks ( a {\displaystyle a} attacks b {\displaystyle b} , b {\displaystyle b} attacks c {\displaystyle c} and d {\displaystyle d} attacks c {\displaystyle c} ). Dung defines some notions : an argument a ∈ A {\displaystyle a\in A} is acceptable with respect to E ⊆ A {\displaystyle E\subseteq A} if and only if E {\displaystyle E} defends a {\displaystyle a} , that is ∀ b ∈ A {\displaystyle \forall b\in A} such that ( b , a ) ∈ R , ∃ c ∈ E {\displaystyle (b,a)\in R,\exists c\in E} such that ( c , b ) ∈ R {\displaystyle (c,b)\in R} , a set of arguments E {\displaystyle E} is conflict-free if there is no attack between its arguments, formally : ∀ a , b ∈ E , ( a , b ) ∉ R {\displaystyle \forall a,b\in E,(a,b)\not \in R} , a set of arguments E {\displaystyle E} is admissible if and only if it is conflict-free and all its arguments are acceptable with respect to E {\displaystyle E} . === Different semantics of acceptance === ==== Extensions ==== To decide if an argument can be accepted or not, or if several arguments can be accepted together, Dung defines several semantics of acceptance that allows, given an argumentation system, sets of arguments (called extensions) to be computed. For instance, given S = ⟨ A , R ⟩ {\displaystyle S=\langle A,R\rangle } , E {\displaystyle E} is a complete extension of S {\displaystyle S} only if it is an admissible set and every acceptable argument with respect to E {\displaystyle E} belongs to E {\displaystyle E} , E {\displaystyle E} is a preferred extension of S {\displaystyle S} only if it is a maximal element (with respect to the set-theoretical inclusion) among the admissible sets with respect to S {\displaystyle S} , E {\displaystyle E} is a stable extension of S {\displaystyle S} only if it is a conflict-free set that attacks every argument that does not belong in E {\displaystyle E} (formally, ∀ a ∈ A ∖ E , ∃ b ∈ E {\displaystyle \forall a\in A\backslash E,\exists b\in E} such that ( b , a ) ∈ R {\displaystyle (b,a)\in R} , E {\displaystyle E} is the (unique) grounded extension of S {\displaystyle S} only if it is the smallest element (with respect to set inclusion) among the complete extensions of S {\displaystyle S} . There exists some inclusions between the sets of extensions built with these semantics : Every stable extension is preferred, Every preferred extension is complete, The grounded extension is complete, If the system is well-founded (there exists no infinite sequence a 0 , a 1 , … , a n , … {\displaystyle a_{0},a_{1},\dots ,a_{n},\dots } such that ∀ i > 0 , ( a i + 1 , a i ) ∈ R {\displaystyle \forall i>0,(a_{i+1},a_{i})\in R} ), all these semantics coincide—only one extension is grounded, stable, preferred, and complete. Some other semantics have been defined. One introduce the notation E x t σ ( S ) {\displaystyle Ext_{\sigma }(S)} to note the set of σ {\displaystyle \sigma } -extensions of the system S {\displaystyle S} . In the case of the system S {\displaystyle S} in the figure above, E x t σ ( S ) = { { a , d } } {\displaystyle Ext_{\sigma }(S)=\{\{a,d\}\}} for every Dung's semantic—the system is well-founded. That explains why the semantics coincide, and the accepted arguments are: a {\displaystyle a} and d {\displaystyle d} . ==== Labellings ==== Labellings are a more expressive way than extensions to express the acceptance of the arguments. Concretely, a labelling is a mapping that associates every argument with a label in (the argument is accepted), out (the argument is rejected), or undec (the argument is undefined—not accepted or refused). One can also note a labelling as a set of pairs ( a r g u m e n t , l a b e l ) {\displaystyle ({\mathit {argument}},{\mathit {label}})} . Such a mapping does not make sense without additional constraint. The notion of reinstatement labelling guarantees the sense of the mapping. L {\displaystyle L} is a reinstatement labelling on the system S = ⟨ A , R ⟩ {\displaystyle S=\langle A,R\rangle } if and only if : ∀ a ∈ A , L ( a ) = i n {\displaystyle \forall a\in A,L(a)={\mathit {in}}} if and only if ∀ b ∈ A {\displaystyle \forall b\in A} such that ( b , a ) ∈ R , L ( b ) = o u t {\displaystyle (b,a)\in R,L(b)={\mathit {out}}} ∀ a ∈ A , L ( a ) = o u t {\displaystyle \forall a\in A,L(a)={\mathit {out}}} if and only if ∃ b ∈ A {\displaystyle \exists b\in A} such that ( b , a ) ∈ R {\displaystyle (b,a)\in R} and L ( b ) = i n {\displaystyle L(b)={\mathit {in}}} ∀ a ∈ A , L ( a ) = u n d e c {\displaystyle \forall a\in A,L(a)={\mathit {undec}}} if and only if L ( a ) ≠ i n {\displaystyle L(a)\neq {\mathit {in}}} and L ( a ) ≠ o u t {\displaystyle L(a)\neq {\mathit {out}}} One can convert every extension into a reinstatement labelling: the arguments of the extension are in, those attacked by an argument of the extension are out, and the others are undec. Conversely, one can build an extension from a reinstatement labelling just by keeping the arguments in. Indeed, Caminada proved that the reinstatement labellings and the complete extensions can be mapped in a bijective way. Moreover, the other Datung's semantics can be associated to some particular sets of reinstatement labellings. Reinstatement labellings distinguish arguments not accepted because they are attacked by accepted arguments from undefined arguments—that is, those that are not defended cannot defend themselves. An argument is undec if it is attacked by at least another undec. If it is attacked only by arguments out, it must be in, and if it is attacked some argument in, then it is out. The unique reinstatement labelling that corresponds to the system S {\displaystyle S} above is L = { ( a , i n ) , ( b , o u t ) , ( c , o u t ) , ( d , i n ) } {\displaystyle L=\{(a,{\mathit {in}}),(b,{\mathit {out}}),(c,{\mathit {out}}),(d,{\mathit {in}})\}} . === Inference from an argumentation system === In the general case when several extensions are computed for a given semantic σ {\displaystyle \sigma } , the agent that reasons from the system can use several mechanisms to infer information: Credulous inference: the agent accepts an argument if it belongs to at least one of the σ {\displaystyle \sigma } -extensions—in which case, the agent risks accepting some arguments that are not acceptable together ( a {\displaystyle a} attacks b {\displaystyle b} , and a {\displaystyle a} and b {\displaystyle b} each belongs to an extension) Skeptical inference: the agent accepts an argument only if it belongs to every σ {\displaystyle \sigma } -extension. In this case, the agent risks deducing too little information (if the intersection of the extensions is empty or has a very small cardinal). For these two methods to infer information, one can identify the set of accepted arguments, respectively C r σ ( S ) {\displaystyle Cr_{\sigma }(S)} the set of the arguments credulously accepted under the semantic σ {\displaystyle \sigma } , and S c σ ( S ) {\displaystyle Sc_{\sigma }(S)} the set of arguments accepted skeptically under the semantic σ {\displaystyle \sigma } (the σ {\displaystyle \sigma } can be missed if there is no possible ambiguity about the semantic). Of course, when there is only one extension (for instance, when the system is well-founded), this problem is very simple: the agent accepts arguments of the unique extension and rejects others. The same reasoning can be done with labellings that correspond to the chosen semantic : an argument can be accepted if it is in for each labelling and refused if it is out for each labelling, the others being in an undecided state (the status of the arguments can remind the

    Read more →
  • Hello World: How to be Human in the Age of the Machine

    Hello World: How to be Human in the Age of the Machine

    Hello World: How to Be Human in the Age of the Machine (also titled Hello World: Being Human in the Age of Algorithms) is a book on the growing influence of algorithms and artificial intelligence (AI) on human life, authored by mathematician and science communicator Hannah Fry. The book examines how algorithms are increasingly shaping decisions in critical areas such as healthcare, transportation, justice, finance, and the arts. == Overview == Fry uses real-world examples, such as driverless cars and predictive policing, to illustrate her points. She emphasizes that algorithms are not inherently objective; they reflect biases embedded in their design and data inputs. While acknowledging their potential to improve efficiency and accuracy, Fry cautions against over-reliance on machines without human judgment. Fry explores moral questions surrounding algorithmic decision-making, such as whether machines can replace human empathy in critical situations. She advocates for greater scrutiny of algorithms to ensure fairness and avoid harmful biases. The book proposes a "cyborg future", where humans work alongside algorithms to enhance decision-making while retaining ultimate control. == Reception == Hello World has been praised for its clarity, engaging storytelling, and balanced perspective. Critics have highlighted Fry's ability to make complex topics accessible to general audiences while raising important questions about technology's impact on society. The book was shortlisted for awards such as the 2018 Baillie Gifford Prize and the Royal Society Science Book Prize.

    Read more →
  • Quantum artificial life

    Quantum artificial life

    Quantum artificial life is the application of quantum algorithms with the ability to simulate biological behavior. Quantum computers offer many potential improvements to processes performed on classical computers, including machine learning and artificial intelligence. Artificial intelligence applications are often inspired by the idea of mimicking human brains through closely related biomimicry. This has been implemented to a certain extent on classical computers (using neural networks), but quantum computers offer many advantages in the simulation of artificial life. Artificial life and artificial intelligence are extremely similar, with minor differences; the goal of studying artificial life is to understand living beings better, while the goal of artificial intelligence is to create intelligent beings. In 2016, Alvarez-Rodriguez et al. developed a proposal for a quantum artificial life algorithm with the ability to simulate life and Darwinian evolution. In 2018, the same research team led by Alvarez-Rodriguez performed the proposed algorithm on the IBM ibmqx4 quantum computer, and received optimistic results. The results accurately simulated a system with the ability to undergo self-replication at the quantum scale. == Artificial life on quantum computers == The growing advancement of quantum computers has led researchers to develop quantum algorithms for simulating life processes. Researchers have designed a quantum algorithm that can accurately simulate Darwinian Evolution. Since the complete simulation of artificial life on quantum computers has only been actualized by one group, this section shall focus on the implementation by Alvarez-Rodriguez, Sanz, Lomata, and Solano on an IBM quantum computer. Individuals were realized as two qubits, one representing the genotype of the individual and the other representing the phenotype. The genotype is copied to transmit genetic information through generations, and the phenotype is dependent on the genetic information as well as the individual's interactions with their environment. In order to set up the system, the state of the genotype is instantiated by some rotation of an ancillary state ( | 0 ⟩ ⟨ 0 | {\displaystyle |0\rangle \langle 0|} ). The environment is a two-dimensional spatial grid occupied by individuals and ancillary states. The environment is divided into cells that are able to possess one or more individuals. Individuals move throughout the grid and occupy cells randomly; when two or more individuals occupy the same cell they interact with each other. === Self replication === The ability to self-replicate is critical for simulating life. Self-replication occurs when the genotype of an individual interacts with an ancillary state, creating a genotype for a new individual; this genotype interacts with a different ancillary state in order to create the phenotype. During this interaction, one would like to copy some information about the initial state into the ancillary state, but by the no cloning theorem, it is impossible to copy an arbitrary unknown quantum state. However, physicists have derived different methods for quantum cloning which does not require the exact copying of an unknown state. The method that has been implemented by Alvarez-Rodriguez et al. is one that involves the cloning of the expectation value of some observable. For a unitary U {\displaystyle U} which copies the expectation value of some set of observables X {\displaystyle {\mathsf {X}}} of state ρ {\displaystyle \rho } into a blank state ρ e {\displaystyle \rho _{e}} , the cloning machine is defined by any ( U , ρ e , X ) {\displaystyle (U,\rho _{e},{\mathsf {X}})} that fulfill the following: ∀ ρ ∀ X ∈ X {\displaystyle \forall \rho \forall X\in {\mathsf {X}}} X ¯ = X 1 ¯ = X 2 ¯ {\displaystyle {\bar {X}}={\bar {X_{1}}}={\bar {X_{2}}}} Where X ¯ {\displaystyle {\bar {X}}} is the mean value of the observable in ρ {\displaystyle \rho } before cloning, X 1 ¯ {\displaystyle {\bar {X_{1}}}} is the mean value of the observable in ρ {\displaystyle \rho } after cloning, and X 2 ¯ {\displaystyle {\bar {X_{2}}}} is the mean value of the observable in ρ e {\displaystyle \rho _{e}} after cloning. Note that the cloning machine has no dependence on ρ {\displaystyle \rho } because we want to be able to clone the expectation of the observables for any initial state. It is important to note that cloning the mean value of the observable transmits more information than is allowed classically. The calculation of the mean value is defined naturally as: X ¯ = T r [ ρ X ] {\displaystyle {\bar {X}}=Tr[\rho X]} , X 1 ¯ = T r [ R X ⊗ I ] {\displaystyle {\bar {X_{1}}}=Tr[RX\otimes I]} , X 2 ¯ = T r [ R I ⊗ X ] {\displaystyle {\bar {X_{2}}}=Tr[RI\otimes X]} where R = U ρ ⊗ ρ e U † {\displaystyle R=U\rho \otimes \rho _{e}U^{\dagger }} The simplest cloning machine clones the expectation value of σ z {\displaystyle \sigma _{z}} in arbitrary state ρ = | ψ ⟩ ⟨ ψ | {\displaystyle \rho =|\psi \rangle \langle \psi |} to ρ e = | 0 ⟩ ⟨ 0 | {\displaystyle \rho _{e}=|0\rangle \langle 0|} using U = C N O T {\displaystyle U=CNOT} . This is the cloning machine implemented for self-replication by Alvarez-Rodriguez et al. The self-replication process clearly only requires interactions between two qubits, and therefore this cloning machine is the only one necessary for self replication. === Interactions === Interactions occur between individuals when the two take up the same space on the environmental grid. The presence of interactions between individuals provides an advantage for shorter-lifespan individuals. When two individuals interact, exchanges of information between the two phenotypes may or may not occur based on their existing values. When both individual's control qubits (genotypes) are alike, no information will be exchanged. When the control qubits differ, the target qubits (phenotype) will be exchanged between the two individuals. This procedure produces a constantly changing predator-prey dynamic in the simulation. Therefore, long-living qubits, with a larger genetic makeup in the simulation, are at a disadvantage. Since information is only exchanged when interacting with an individual of different genetic makeup, the short-lived population has the advantage. === Mutation === Mutations exist in the artificial world with limited probability, equivalent to their occurrence in the real world. There are two ways in which the individual can mutate: through random single qubit rotations and by errors in the self-replication process. There are two different operators that act on the individual and cause mutations. The M operation causes a spontaneous mutation within the individual by rotating a single qubit by parameter θ. The parameter θ is random for each mutation, which creates biodiversity within the artificial environment. The M operation is a unitary matrix which can be described as: M = ( cos ⁡ ( θ ) s i n ( θ ) s i n ( θ ) − c o s ( θ ) ) {\displaystyle M={\begin{pmatrix}\cos(\theta )&sin(\theta )\\sin(\theta )&-cos(\theta )\end{pmatrix}}} The other possible way for mutations to occur is due to errors in the replication process. Due to the no-cloning theorem, it is impossible to produce perfect copies of systems that are originally in unknown quantum states. However, quantum cloning machines make it possible to create imperfect copies of quantum states, in other words, the process introduces some degree of error. The error that exists in current quantum cloning machines is the root cause for the second kind of mutations in the artificial life experiment. The imperfect cloning operation can be seen as: U M ( θ ) = I 4 + 1 2 ( 0 0 0 1 ) ⊗ ( − 1 1 1 − 1 ) ( c o s θ + i s i n θ + 1 ) {\displaystyle U_{M}(\theta )=\mathrm {I} _{4}+{\frac {1}{2}}{\begin{pmatrix}0&0\\0&1\end{pmatrix}}\otimes {\begin{pmatrix}-1&1\\1&-1\end{pmatrix}}(cos\theta +isin\theta +1)} The two kinds of mutations affect the individual differently. While the spontaneous M operation does not affect the phenotype of the individual, the self-replicating error mutation, UM, alters both the genotype of the individual, and its associated lifetime. The presence of mutations in the quantum artificial life experiment is critical for providing randomness and biodiversity. The inclusion of mutations helps to increase the accuracy of the quantum algorithm. === Death === At the instant the individual is created (when the genotype is copied into the phenotype), the phenotype interacts with the environment. As time evolves, the interaction of the individual with the environment simulates aging which eventually leads to the death of the individual. The death of an individual occurs when the expectation value of σ z {\displaystyle \sigma _{z}} is within some ϵ {\displaystyle \epsilon } of 1 in the phenotype, or, equivalently, when ρ p = | 0 ⟩ ⟨ 0 | {\displaystyle \rho _{p}=|0\rangle \langle 0|} The Lindbladian describes the interaction of the individual with the environment: ρ

    Read more →
  • Caffe (software)

    Caffe (software)

    Caffe (Convolutional Architecture for Fast Feature Embedding) is a deep learning framework, originally developed at University of California, Berkeley. It is open source, under a BSD license. It is written in C++, with a Python interface. == History == Yangqing Jia created the Caffe project during his PhD at UC Berkeley, while working the lab of Trevor Darrell. The first version, called "DeCAF", made its first appearance in Spring 2013 when it was used for the ILSVRC challenge (later called ImageNet). The library was named Caffe and released to the public in December 2013. It reached end-of-support in 2018. It is hosted on GitHub. == Features == Caffe supports many different types of deep learning architectures geared towards image classification and image segmentation. It supports CNN, RCNN, LSTM and fully-connected neural network designs. Caffe supports GPU- and CPU-based acceleration computational kernel libraries such as Nvidia cuDNN and Intel MKL. == Applications == Caffe is being used in academic research projects, startup prototypes, and even large-scale industrial applications in vision, speech, and multimedia. Yahoo! has also integrated Caffe with Apache Spark to create CaffeOnSpark, a distributed deep learning framework. == Caffe2 == In April 2017, Facebook announced Caffe2, which included new features such as recurrent neural network (RNN). At the end of March 2018, Caffe2 was merged into PyTorch.

    Read more →
  • Incremental heuristic search

    Incremental heuristic search

    Incremental heuristic search algorithms combine both incremental and heuristic search to speed up searches of sequences of similar search problems, which is important in domains that are only incompletely known or change dynamically. Incremental search has been studied at least since the late 1960s. Incremental search algorithms reuse information from previous searches to speed up the current search and solve search problems potentially much faster than solving them repeatedly from scratch. Similarly, heuristic search has also been studied at least since the late 1960s. Heuristic search algorithms, often based on A, use heuristic knowledge in the form of approximations of the goal distances to focus the search and solve search problems potentially much faster than uninformed search algorithms. The resulting search problems, sometimes called dynamic path planning problems, are graph search problems where paths have to be found repeatedly because the topology of the graph, its edge costs, the start vertex or the goal vertices change over time. So far, three main classes of incremental heuristic search algorithms have been developed: The first class restarts A at the point where its current search deviates from the previous one (example: Fringe Saving A). The second class updates the h-values (heuristic, i.e. approximate distance to goal) from the previous search during the current search to make them more informed (example: Generalized Adaptive A). The third class updates the g-values (distance from start) from the previous search during the current search to correct them when necessary, which can be interpreted as transforming the A search tree from the previous search into the A search tree for the current search (examples: Lifelong Planning A, D, D Lite). All three classes of incremental heuristic search algorithms are different from other replanning algorithms, such as planning by analogy, in that their plan quality does not deteriorate with the number of replanning episodes. == Applications == Incremental heuristic search has been extensively used in robotics, where a larger number of path planning systems are based on either D (typically earlier systems) or D Lite (current systems), two different incremental heuristic search algorithms.

    Read more →
  • Equalized odds

    Equalized odds

    Equalized odds, also referred to as conditional procedure accuracy equality and disparate mistreatment, is a measure of fairness in machine learning. A classifier satisfies this definition if the subjects in the protected and unprotected groups have equal true positive rate and equal false positive rate, satisfying the formula: P ( R = + | Y = y , A = a ) = P ( R = + | Y = y , A = b ) y ∈ { + , − } ∀ a , b ∈ A {\displaystyle P(R=+|Y=y,A=a)=P(R=+|Y=y,A=b)\quad y\in \{+,-\}\quad \forall a,b\in A} For example, A {\displaystyle A} could be gender, race, or any other characteristics that we want to be free of bias, while Y {\displaystyle Y} would be whether the person is qualified for the degree, and the output R {\displaystyle R} would be the school's decision whether to offer the person to study for the degree. In this context, higher university enrollment rates of African Americans compared to whites with similar test scores might be necessary to fulfill the condition of equalized odds, if the "base rate" of Y {\displaystyle Y} differs between the groups. The concept was originally defined for binary-valued Y {\displaystyle Y} . In 2017, Woodworth et al. generalized the concept further for multiple classes.

    Read more →
  • Concurrent MetateM

    Concurrent MetateM

    Concurrent MetateM is a multi-agent language in which each agent is programmed using a set of (augmented) temporal logic specifications of the behaviour it should exhibit. These specifications are executed directly to generate the behaviour of the agent. As a result, there is no risk of invalidating the logic as with systems where logical specification must first be translated to a lower-level implementation. The root of the MetateM concept is Gabbay's separation theorem; any arbitrary temporal logic formula can be rewritten in a logically equivalent past → future form. Execution proceeds by a process of continually matching rules against a history, and firing those rules when antecedents are satisfied. Any instantiated future-time consequents become commitments which must subsequently be satisfied, iteratively generating a model for the formula made up of the program rules. == Temporal Connectives == The Temporal Connectives of Concurrent MetateM can divided into two categories, as follows: Strict past time connectives: '●' (weak last), '◎' (strong last), '◆' (was), '■' (heretofore), 'S' (since), and 'Z' (zince, or weak since). Present and future time connectives: '◯' (next), '◇' (sometime), '□' (always), 'U' (until), and 'W' (unless). The connectives {◎,●,◆,■,◯,◇,□} are unary; the remainder are binary. === Strict past time connectives === ==== Weak last ==== ●ρ is satisfied now if ρ was true in the previous time. If ●ρ is interpreted at the beginning of time, it is satisfied despite there being no actual previous time. Hence "weak" last. ==== Strong last ==== ◎ρ is satisfied now if ρ was true in the previous time. If ◎ρ is interpreted at the beginning of time, it is not satisfied because there is no actual previous time. Hence "strong" last. ==== Was ==== ◆ρ is satisfied now if ρ was true in any previous moment in time. ==== Heretofore ==== ■ρ is satisfied now if ρ was true in every previous moment in time. ==== Since ==== ρSψ is satisfied now if ψ is true at any previous moment and ρ is true at every moment after that moment. ==== Zince, or weak since ==== ρZψ is satisfied now if (ψ is true at any previous moment and ρ is true at every moment after that moment) OR ψ has not happened in the past. === Present and future time connectives === ==== Next ==== ◯ρ is satisfied now if ρ is true in the next moment in time. ==== Sometime ==== ◇ρ is satisfied now if ρ is true now or in any future moment in time. ==== Always ==== □ρ is satisfied now if ρ is true now and in every future moment in time. ==== Until ==== ρUψ is satisfied now if ψ is true at any future moment and ρ is true at every moment prior. ==== Unless ==== ρWψ is satisfied now if (ψ is true at any future moment and ρ is true at every moment prior) OR ψ does not happen in the future.

    Read more →
  • Neighborhood operation

    Neighborhood operation

    In computer vision and image processing a neighborhood operation is a commonly used class of computations on image data which implies that it is processed according to the following pseudo code: Visit each point p in the image data and do { N = a neighborhood or region of the image data around the point p result(p) = f(N) } This general procedure can be applied to image data of arbitrary dimensionality. Also, the image data on which the operation is applied does not have to be defined in terms of intensity or color, it can be any type of information which is organized as a function of spatial (and possibly temporal) variables in p. The result of applying a neighborhood operation on an image is again something which can be interpreted as an image, it has the same dimension as the original data. The value at each image point, however, does not have to be directly related to intensity or color. Instead it is an element in the range of the function f, which can be of arbitrary type. Normally the neighborhood N is of fixed size and is a square (or a cube, depending on the dimensionality of the image data) centered on the point p. Also the function f is fixed, but may in some cases have parameters which can vary with p, see below. In the simplest case, the neighborhood N may be only a single point. This type of operation is often referred to as a point-wise operation. == Examples == The most common examples of a neighborhood operation use a fixed function f which in addition is linear, that is, the computation consists of a linear shift invariant operation. In this case, the neighborhood operation corresponds to the convolution operation. A typical example is convolution with a low-pass filter, where the result can be interpreted in terms of local averages of the image data around each image point. Other examples are computation of local derivatives of the image data. It is also rather common to use a fixed but non-linear function f. This includes median filtering, and computation of local variances. The Nagao-Matsuyama filter is an example of a complex local neighbourhood operation that uses variance as an indicator of the uniformity within a pixel group. The result is similar to a convolution with a low-pass filter with the added effect of preserving sharp edges. There is also a class of neighborhood operations in which the function f has additional parameters which can vary with p: Visit each point p in the image data and do { N = a neighborhood or region of the image data around the point p result(p) = f(N, parameters(p)) } This implies that the result is not shift invariant. Examples are adaptive Wiener filters. == Implementation aspects == The pseudo code given above suggests that a neighborhood operation is implemented in terms of an outer loop over all image points. However, since the results are independent, the image points can be visited in arbitrary order, or can even be processed in parallel. Furthermore, in the case of linear shift-invariant operations, the computation of f at each point implies a summation of products between the image data and the filter coefficients. The implementation of this neighborhood operation can then be made by having the summation loop outside the loop over all image points. An important issue related to neighborhood operation is how to deal with the fact that the neighborhood N becomes more or less undefined for points p close to the edge or border of the image data. Several strategies have been proposed: Compute result only for points p for which the corresponding neighborhood is well-defined. This implies that the output image will be somewhat smaller than the input image. Zero padding: Extend the input image sufficiently by adding extra points outside the original image which are set to zero. The loops over the image points described above visit only the original image points. Border extension: Extend the input image sufficiently by adding extra points outside the original image which are set to the image value at the closest image point. The loops over the image points described above visit only the original image points. Mirror extension: Extend the image sufficiently much by mirroring the image at the image boundaries. This method is less sensitive to local variations at the image boundary than border extension. Wrapping: The image is tiled, so that going off one edge wraps around to the opposite side of the image. This method assumes that the image is largely homogeneous, for example a stochastic image texture without large textons.

    Read more →
  • Artificial intelligence in spirituality

    Artificial intelligence in spirituality

    Some users of artificial intelligence (AI) technologies, especially chatbots, may develop beliefs that AI has or can attain supernatural or spiritual powers. AI models such as ChatGPT are turned to for fortune telling, mysticism and remote viewing. Recent and sudden advances in large language models have led to folk myths about their origin or capabilities, as well as their deification or worship by some users. Tucker Carlson has made similar claims, including directly to Sam Altman. Pope Leo XIV advised priests against using LLM models when it came to the creation of sermons.

    Read more →
  • Domain adaptation

    Domain adaptation

    Domain adaptation is a field associated with machine learning and transfer learning. It addresses the challenge of training a model on one data distribution (the source domain) and applying it to a related but different data distribution (the target domain). A common example is spam filtering, where a model trained on emails from one user (source domain) is adapted to handle emails for another user with significantly different patterns (target domain). Domain adaptation techniques can also leverage unrelated data sources to improve learning. When multiple source distributions are involved, the problem extends to multi-source domain adaptation. Domain adaptation is a specific type of transfer learning. According to the taxonomy laid out by Pan and Yang (2010), it falls into the category of transductive transfer learning. In this setting, the source and target tasks are the same (e.g., both are object recognition), but the domains differ (different marginal distributions). This distinguishes it from inductive transfer learning (where labeled data is available for the target task) and unsupervised transfer learning (where labels are unavailable in both domains). == Classification of domain adaptation problems == Domain adaptation setups are classified in two different ways: according to the distribution shift between the domains, and according to the available data from the target domain. === Distribution shifts === Common distribution shifts are classified as follows: Covariate Shift occurs when the input distributions of the source and destination change, but the relationship between inputs and labels remains unchanged. The above-mentioned spam filtering example typically falls in this category. Namely, the distributions (patterns) of emails may differ between the domains, but emails labeled as spam in the one domain should similarly be labeled in another. Prior Shift (Label Shift) occurs when the label distribution differs between the source and target datasets, while the conditional distribution of features given labels remains the same. An example is a classifier of hair color in images from Italy (source domain) and Norway (target domain). The proportions of hair colors (labels) differ, but images within classes like blond and black-haired populations remain consistent across domains. A classifier for the Norway population can exploit this prior knowledge of class proportions to improve its estimates. Concept Shift (Conditional Shift) refers to changes in the relationship between features and labels, even if the input distribution remains the same. For instance, in medical diagnosis, the same symptoms (inputs) may indicate entirely different diseases (labels) in different populations (domains). === Data available during training === Domain adaptation problems typically assume that some data from the target domain is available during training. Problems can be classified according to the type of this available data: Unsupervised: Unlabeled data from the target domain is available, but no labeled data. In the above-mentioned example of spam filtering, this corresponds to the case where emails from the target domain (user) are available, but they are not labeled as spam. Domain adaptation methods can benefit from such unlabeled data, by comparing its distribution (patterns) with the labeled source domain data. Semi-supervised: Most data that is available from the target domain is unlabelled, but some labeled data is also available. In the above-mentioned case of spam filter design, this corresponds to the case that the target user has labeled some emails as being spam or not. Supervised: All data that is available from the target domain is labeled. In this case, domain adaptation reduces to refinement of the source domain predictor. In the above-mentioned example classification of hair-color from images, this could correspond to the refinement of a network already trained on a large dataset of labeled images from Italy, using newly available labeled images from Norway. == Formalization == Let X {\displaystyle X} be the input space (or description space) and let Y {\displaystyle Y} be the output space (or label space). The objective of a machine learning algorithm is to learn a mathematical model (a hypothesis) h : X → Y {\displaystyle h:X\to Y} able to attach a label from Y {\displaystyle Y} to an example from X {\displaystyle X} . This model is learned from a learning sample S = { ( x i , y i ) ∈ ( X × Y ) } i = 1 m {\displaystyle S=\{(x_{i},y_{i})\in (X\times Y)\}_{i=1}^{m}} . Usually in supervised learning (without domain adaptation), we suppose that the examples ( x i , y i ) ∈ S {\displaystyle (x_{i},y_{i})\in S} are drawn i.i.d. from a distribution D S {\displaystyle D_{S}} of support X × Y {\displaystyle X\times Y} (unknown and fixed). The objective is then to learn h {\displaystyle h} (from S {\displaystyle S} ) such that it commits the least error possible for labelling new examples coming from the distribution D S {\displaystyle D_{S}} . The main difference between supervised learning and domain adaptation is that in the latter situation we study two different (but related) distributions D S {\displaystyle D_{S}} and D T {\displaystyle D_{T}} on X × Y {\displaystyle X\times Y} . The domain adaptation task then consists of the transfer of knowledge from the source domain D S {\displaystyle D_{S}} to the target one D T {\displaystyle D_{T}} . The goal is then to learn h {\displaystyle h} (from labeled or unlabelled samples coming from the two domains) such that it commits as little error as possible on the target domain D T {\displaystyle D_{T}} . The major issue is the following: if a model is learned from a source domain, what is its capacity to correctly label data coming from the target domain? == Four algorithmic principles == === Reweighting algorithms === The objective is to reweight the source labeled sample such that it "looks like" the target sample (in terms of the error measure considered). === Iterative algorithms === A method for adapting consists in iteratively "auto-labeling" the target examples. The principle is simple: a model h {\displaystyle h} is learned from the labeled examples; h {\displaystyle h} automatically labels some target examples; a new model is learned from the new labeled examples. Note that there exist other iterative approaches, but they usually need target labeled examples. === Search of a common representation space === The goal is to find or construct a common representation space for the two domains. The objective is to obtain a space in which the domains are close to each other while keeping good performances on the source labeling task. This can be achieved through the use of Adversarial machine learning techniques where feature representations from samples in different domains are encouraged to be indistinguishable. === Hierarchical Bayesian Model === The goal is to construct a Bayesian hierarchical model p ( n ) {\displaystyle p(n)} , which is essentially a factorization model for counts n {\displaystyle n} , to derive domain-dependent latent representations allowing both domain-specific and globally shared latent factors. == Software packages == Several compilations of domain adaptation and transfer learning algorithms have been implemented over the past decades: SKADA (Python) ADAPT (Python) TLlib (Python) Domain-Adaptation-Toolbox (MATLAB)

    Read more →