AI Generator Qr Code

AI Generator Qr Code — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • MoltenVK

    MoltenVK

    MoltenVK is a software library which allows Vulkan applications to run on top of Metal on Apple's macOS, iOS, and tvOS operating systems. It is the first software component to be released for the Vulkan Portability Initiative, a project to have a subset of Vulkan run on platforms lacking native Vulkan drivers. There are some limitations compared with a native Vulkan implementation. == History == MoltenVK was first released as a proprietary and commercially licensed product by The Brenwill Workshop on July 27, 2016. On July 31, 2017, Khronos announced the formation of the Vulkan Portability Technical Subgroup. === Open source === On February 26, 2018, Khronos announced that Vulkan became available on macOS and iOS products through the MoltenVK library. Valve announced that Dota 2 will run on macOS using the Vulkan API with the aid of MoltenVK, and that they had made an arrangement with developer The Brenwill Workshop Ltd to release MoltenVK as open-source software under the Apache License version 2.0. On May 30, 2018, Qt was updated with Vulkan for Qt on macOS using MoltenVK. On May 31, 2018, optional Vulkan support for Dota 2 on macOS was released. Benchmarks for the game were available the following day, showing better performance using Vulkan and MoltenVK compared to OpenGL. On July 20, 2018, Wine was updated with Vulkan support on macOS using MoltenVK. On 29 July 2018, the first app using MoltenVK was accepted onto the App Store, after initially being rejected. On 6 August 2018, Google open-sourced Filament, a crossplatform real-time physically based rendering engine with MoltenVK for macOS/iOS. On November 28, 2018, Valve released Artifact, their first Vulkan-only game on macOS using MoltenVK. === Version 1.0 === On 29 January 2019, MoltenVK 1.0.32 was released with early prototype of Vulkan Portability Extensions. RPCS3 and Dolphin emulators were updated with Vulkan support on macOS using MoltenVK. On 13 April 2019, MoltenVK 1.0.34 was released with support for tessellation. On July 30, 2019, MoltenVK 1.0.36 was released targeting Metal 3.0. On July 31, 2020, MoltenVK 1.0.44 was released, adding support for the tvOS platform. On January 23, 2020, MoltenVK was updated to support for some of the new features of Vulkan 1.2, as of Vulkan SDK 1.2.121. === Version 1.1 === On October 1, 2020, MoltenVK 1.1.0 was released, adding full support for Vulkan 1.1, as of Vulkan SDK 1.2.154. On 9 December 2020, MoltenVK 1.1.1 was released, providing support for Vulkan on Apple silicon GPUs and support for the Mac Catalyst platform for porting iOS/iPadOS apps to macOS. === Version 1.2 === On October 18, 2022, MoltenVK 1.2.0 was released, adding full support for Vulkan 1.2 as of Vulkan SDK 1.3.231. In January 2023, MoltenVK 1.2.2 added support for Vulkan as of SDK 1.3.239, while this version of Vulkan SDK fixed some issues with the interconnectivity with Metal API, while version 1.2.3 supported some additional extensions. === Version 1.3 === On May 1, 2025, MoltenVK 1.3 was released with support for Vulkan 1.3. === Version 1.4 === On August 20, 2025, MoltenVK 1.4 was released with support for Vulkan 1.4.

    Read more →
  • Rapid prototyping

    Rapid prototyping

    Rapid prototyping is a group of techniques used to quickly fabricate a scale model of a physical part or assembly using three-dimensional computer aided design (CAD) data. Construction of the part or assembly is usually done using 3D printing or "additive layer manufacturing" technology. The first methods for rapid prototyping became available in mid 1987 and were used to produce models and prototype parts. Today, they are used for a wide range of applications and are used to manufacture production-quality parts in relatively small numbers if desired without the typical unfavorable short-run economics. This economy has encouraged online service bureaus. Historical surveys of RP technology start with discussions of simulacra production techniques used by 19th-century sculptors. Some modern sculptors use the progeny technology to produce exhibitions and various objects. The ability to reproduce designs from a dataset has given rise to issues of rights, as it is now possible to interpolate volumetric data from 2D images. As with CNC subtractive methods, the computer-aided-design – computer-aided manufacturing CAD -CAM workflow in the traditional rapid prototyping process starts with the creation of geometric data, either as a 3D solid using a CAD workstation, or 2D slices using a scanning device. For rapid prototyping this data must represent a valid geometric model; namely, one whose boundary surfaces enclose a finite volume, contain no holes exposing the interior, and do not fold back on themselves. In other words, the object must have an "inside". The model is valid if for each point in 3D space the computer can determine uniquely whether that point lies inside, on, or outside the boundary surface of the model. CAD post-processors will approximate the application vendors' internal CAD geometric forms (e.g., B-splines) with a simplified mathematical form, which in turn is expressed in a specified data format which is a common feature in additive manufacturing: STL file format, a de facto standard for transferring solid geometric models to SFF machines. To obtain the necessary motion control trajectories to drive the actual SFF, rapid prototyping, 3D printing or additive manufacturing mechanism, the prepared geometric model is typically sliced into layers, and the slices are scanned into lines (producing a "2D drawing" used to generate trajectory as in CNC's toolpath), mimicking in reverse the layer-to-layer physical building process. == Application areas == Rapid prototyping is also commonly applied in software engineering to try out new business models and application architectures such as Aerospace, Automotive, Financial Services, Product development, and Healthcare. Aerospace design and industrial teams rely on prototyping in order to create new AM methodologies in the industry. Using SLA they can quickly make multiple versions of their projects in a few days and begin testing quicker. Rapid Prototyping allows designers/developers to provide an accurate idea of how the finished product will turn out before putting too much time and money into the prototype. 3D printing being used for Rapid Prototyping allows for Industrial 3D printing to take place. With this, you could have large-scale moulds to spare parts being pumped out quickly within a short period of time. == Types of Rapid Prototyping == Stereolithography (SLA) → a laser-cured photopolymer for materials such as thermoplastic-like photopolymers. Selective Laser Sintering (SLS) → a laser-sintered powder for materials such as Nylon or TPU. Direct Metal Laser Sintering (DMLS) → laser-sintered metal powder for materials like stainless steel, titanium, chrome, and aluminum. Fused Deposition Modeling (FDM) → fused extrusions of filaments like ABS, PC, and PPCU. Multi Jet Fusion (MJF) → it is an inkjet array selective fusing across bed of nylon powder for Black Nylon 12. PolyJet (PJET) → it is a uv-cured jetted photopolymer to work with acrylic-based and elastomeric photopolymers. Computer Numerical Controlled Machine (CNC) → it is used for manipulating engineering-grade thermoplastics and metals. Injection Molding (IM) → the injection is done using aluminum molds and it is used for thermoplastics, metals and liquid silicone rubber. Vacuum Casting→ is a manufacturing process used to create high-quality prototypes and small batches of parts. == History == In the 1970s, Joseph Henry Condon and others at Bell Labs developed the Unix Circuit Design System (UCDS), automating the laborious and error-prone task of manually converting drawings to fabricate circuit boards for the purposes of research and development. By the 1980s, U.S. policy makers and industrial managers were forced to take note that America's dominance in the field of machine tool manufacturing evaporated, in what was named the machine tool crisis. Numerous projects sought to counter these trends in the traditional CNC CAM area, which had begun in the US. Later when Rapid Prototyping Systems moved out of labs to be commercialized, it was recognized that developments were already international and U.S. rapid prototyping companies would not have the luxury of letting a lead slip away. The National Science Foundation was an umbrella for the National Aeronautics and Space Administration (NASA), the US Department of Energy, the US Department of Commerce NIST, the US Department of Defense, Defense Advanced Research Projects Agency (DARPA), and the Office of Naval Research coordinated studies to inform strategic planners in their deliberations. One such report was the 1997 Rapid Prototyping in Europe and Japan Panel Report in which Joseph J. Beaman founder of DTM Corporation [DTM RapidTool pictured] provides a historical perspective: The roots of rapid prototyping technology can be traced to practices in topography and photosculpture. Within TOPOGRAPHY Blanther (1892) suggested a layered method for making a mold for raised relief paper topographical maps .The process involved cutting the contour lines on a series of plates which were then stacked. Matsubara (1974) of Mitsubishi proposed a topographical process with a photo-hardening photopolymer resin to form thin layers stacked to make a casting mold. PHOTOSCULPTURE was a 19th-century technique to create exact three-dimensional replicas of objects. Most famously Francois Willeme (1860) placed 24 cameras in a circular array and simultaneously photographed an object. The silhouette of each photograph was then used to carve a replica. Morioka (1935, 1944) developed a hybrid photo sculpture and topographic process using structured light to photographically create contour lines of an object. The lines could then be developed into sheets and cut and stacked, or projected onto stock material for carving. The Munz (1956) Process reproduced a three-dimensional image of an object by selectively exposing, layer by layer, a photo emulsion on a lowering piston. After fixing, a solid transparent cylinder contains an image of the object. "The Origins of Rapid Prototyping - RP stems from the ever-growing CAD industry, more specifically, the solid modeling side of CAD. Before solid modeling was introduced in the late 1980's, three-dimensional models were created with wire frames and surfaces. But not until the development of true solid modeling could innovative processes such as RP be developed. Charles Hull, who helped found 3D Systems in 1986, developed the first RP process. This process, called stereolithography, builds objects by curing thin consecutive layers of certain ultraviolet light-sensitive liquid resins with a low-power laser. With the introduction of RP, CAD solid models could suddenly come to life". The technologies referred to as Solid Freeform Fabrication are what we recognize today as rapid prototyping, 3D printing or additive manufacturing: Swainson (1977), Schwerzel (1984) worked on polymerization of a photosensitive polymer at the intersection of two computer controlled laser beams. Ciraud (1972) considered magnetostatic or electrostatic deposition with electron beam, laser or plasma for sintered surface cladding. These were all proposed but it is unknown if working machines were built. Hideo Kodama of Nagoya Municipal Industrial Research Institute was the first to publish an account of a solid model fabricated using a photopolymer rapid prototyping system (1981). The first 3D rapid prototyping system relying on Fused Deposition Modeling (FDM) was made in April 1992 by Stratasys but the patent did not issue until June 9, 1992. Sanders Prototype, Inc introduced the first desktop inkjet 3D Printer (3DP) using an invention from August 4, 1992 (Helinski), Modelmaker 6Pro in late 1993 and then the larger industrial 3D printer, Modelmaker 2, in 1997. Z-Corp using the MIT 3DP powder binding for Direct Shell Casting (DSP) invented 1993 was introduced to the market in 1995. Even at that early date the technology was seen as having a place in manufacturing practice. A low resol

    Read more →
  • Aldus PhotoStyler

    Aldus PhotoStyler

    Aldus PhotoStyler was a graphics software program developed by the Taiwanese company Ulead. Released in June 1991 as the first 24 bit image editor for Windows, it was bought the same year by the Aldus Prepress group. Its main competition was Adobe Photoshop. Version 2.0 (late 1993) introduced a new user interface and improved color calibration. PhotoStyler SE - lacking some features of the version 2.0 - was bundled with scanners like HP ScanJet. The product disappeared from the Adobe product line after Adobe acquired Aldus in 1994.

    Read more →
  • Agent-assisted automation

    Agent-assisted automation

    Agent-assisted automation is a type of call center technology that automates elements of what the call center agent 1) does with his/her desktop tools and/or 2) says to customers during the call using pre-recorded audio. It is a relatively new category of call center technology that shows promise in improving call center productivity and compliance. == Types of agent-assisted automation == === Pre-recorded audio === Pre-recorded audio (sometimes referred to as soundboard (computer program) or as soundboard technology) is another form of agent-assisted automation. The purpose of using pre-recorded messages is to increase the probability (and in some cases error-proof the process so) that the right information is provided to customers at the right time. The required disclosures are pre-recorded to ensure accuracy and understandability. By integrating the recordings with the customer relationship management software, the right combination of disclosures can be played based on the combination of goods and services the customer purchased. The integration with the customer relationship management software also ensures that the order cannot be submitted until the disclosures are played, essentially error-proofing (poka-yoke) the process of ensuring the customer gets all the required consumer protection information. Phone surveys are ideal applications of this technology. Whether surveying market preferences or political views, the pre-recorded audio with an agent listening allows the questions to be asked in the same way every time, uninfluenced by the agents' fatigue levels, accents, or their own views. === Fraud prevention === Fraud prevention is a specialized type of agent-assisted automation focused on reducing ID theft and credit card fraud. ID theft and credit card fraud are huge threats for call centers and their customers and few good solutions exist, but new agent-assisted automation solutions are producing promising results. The technology allows the agents to remain on the phone while the customers use their phone key pads to enter the information. The tones are masked and the information passes directly into the customer relationship management system or payment gateway in the case of credit card transactions. The automation essentially makes it impossible for call center agents and also call center personnel that might be monitoring the calls to steal the credit card number, social security number, or other personally identifiable information. === Outbound telemarketing === Another specialized application space of agent-assisted automation is in outbound telemarketing, which goes under numerous headings including outbound prospecting, cold calling, solicitation, fund-raising, etc. Turnover is high among agents engaged in this kind of work because the task is tedious and emotionally difficult. It is tedious because the agent spends the bulk of their day, not talking to qualified leads, but in getting wrong numbers and answering machines. == Benefits == Just as automation has benefited manufacturing by reducing the mental and physical effort required of workers while simultaneously improving throughput, quality, and safety, agent-assisted automation is improving call center results while reducing the tiring aspects of the job for agents. In some cases, the agent-assisted automation streamlines the process and allows calls to be handled more quickly. By eliminating cutting and pasting from one application to another, by auto-navigating applications, and by providing a single view of the customer, agent-assisted automation can reduce call handle time and increase agent productivity. Second, in theory, the more steps that can be automated and the more logic that can be built into the call flow (e.g., if the customer buys items 2 and 9, then disclosures a, c, and f are read by the pre-recorded audio), then companies may be able to reduce the amount of training that is required of the agents while at the same time ensuring more consistency and accuracy. However, no published studies have reported this result yet. But an even larger problem in call centers is between-agent variation in behavior and results. Agents differ in the amount of training and coaching they receive, they differ in the amount of experience they have, their jobs are repetitious and tiring, and the process and procedures the agents are supposed to follow constantly change. Moreover, there are significant individual differences between agents in their intelligence, personality, motivations, etc. which all affect performance. Despite the large amount of money call centers have spent over decades trying to reduce between-agent variation, the problem is still so prevalent that one large study of customer interactions with call centers found that a customer's experience was completely a function of the quality of the agent who happened to answer the phone. Therefore, the most significant benefit of agent-assisted automation may prove to be in how the automation error-proofs or poka-yoke the process and ensures that something that needs to be done or said happens every time. Properly implemented, the between-agent variation for whatever step of the process the automation is applied to may be able to be reduced to near zero. This is especially important in a collection agency whose processes and procedures are closely regulated by the Fair Debt Collection Practices Act.

    Read more →
  • Singularity studies

    Singularity studies

    Singularity studies is an interdisciplinary academic field which examines the idea of technological singularity — the hypothesised point at which artificial intelligence may surpass human intelligence, might be attained by artificial intelligence (AI), robotics, and other technologies and sciences, and its social impacts. In this academic field, the study and research are conducted across a broad array of terrains such as information science, robotics, social informatics, economics, philosophy, and ethics. The primary aim of singularity studies is to gain an integrative understanding of the transformation of social systems occurring in tandem with the explosive evolution of AI and also the changes to be effected by such transformation in the view of humans, ethics, and legal systems. == History == An academic work on technological singurality has appeared in computer science, philosophy, sociology, and law since the early 1990s. Early discussions of an intelligence explosion were popularised by science-fiction writer Vernor Vinge in 1993 and later systematised by futurist Ray Kurzweil. Since the 2010s, universities such as Oxford, Stanford, and Keio have established dedicated programmes, while peer-reviewed journals have begun to publish scenario analyses and policy studies. Ongoing debates question the predictive value of singularity scenarios and warn against a deterministic view of technology. == Characteristics of research == Singularity studies extends beyond mere future predictions and offer an intellectual foundation for proactively designing and creating a desirable future. Principal research themes in this realm include: Ethics of AI; Social implications of technologies; Possibility of harmonious coexistence of humans and AI; Communication with AI; and Redesign of social systems. == Technologists and academics == Vernor Vinge: Propounded the concept of singularity in 1993, making a massive impact on the academic and science-fiction spheres. Ray Kurzweil: Predicted the advent around 2045 of the technological singularity in his 2005 book The Singularity Is Near. Nick Bostrom: Offered philosophical reflections on superintelligence and the risks posed by AI. He is the founding director of the now-dissolved Future of Humanity Institute at the University of Oxford. === Japan === Kento Sasano: A social informatician, AI educator, and inventor. He is the president of the Japan Society of Singularity Studies. == Challenges and outlook == Singularity studies is still evolving as an academic field, and quite a few challenges remain unresolved in regard to the systematization of their theories, research methods, and educational curricula. That said, in this day and age of accelerating technological and societal shifts, interdisciplinary approaches have gained in importance and are drawing much attention in the arenas of scholarly research, intercorporate collaboration, and policy planning.

    Read more →
  • PhotoLine

    PhotoLine

    PhotoLine is a general purpose bitmap and vector graphics editor developed and published by Computerinsel GmbH for Windows, macOS, and Linux/Wine. It was originally created in 1995 by Gerhard Huber and Martin Huber. The program combines bitmap and vector graphics editing in one seamless working application unlike most graphics software which tend to focus on either bitmap or vector editing and output. PhotoLine is considered as a market competitor to Adobe Photoshop. == Features == PhotoLine edits and composes multi-layer raster and vector images with deep support for masking and alpha compositing and with full color management. Editing and color management in PhotoLine is mostly non-destructive. Image data in layers is preserved without loss of information regardless of the document's image mode or layer transformation. color depth, image resolution, color model, and ICC profile are preserved for each individual layer or group of layers. Layers can be cloned and reused anywhere in the layer stack, including repurposed as layer masks. Layer blending and compositing in PhotoLine supports common blend modes, and features a layer blend range of -200 to +200 percent. It is also possible to control which channels are blended for each layer, adjustment layer, and layer mask or group of layers. Filters, adjustment layers, and brushes have access to Lab and HIS color modes (HIS is a variant of HSL), separately of the color model of the underlying image layer. In Addition to raster and vector editing, PhotoLine can be used for small desktop publishing projects. Multi-page documents with page spreads and text flow between text frames and pages are supported. Character and paragraph styles can be defined. Spot colors, bleed settings, a baseline grid, a table of contents generator, and PDF/X support help with these projects. PhotoLine is however much more limited when compared to dedicated publishing software such as Adobe InDesign or QuarkXPress. PhotoLine incorporates the Open-source software library LibRaw to read raw images from digital cameras for import. Developing these files is non-destructive with a choice of embedding the RAW image data either in the PhotoLine document or link to the external RAW image file. PhotoLine can open raw files as linear unmodified and non color managed source images. Photoshop PSD files can be imported and exported. Core functionality of PhotoLine can be extended through standard Photoshop filter plugins, the G'MIC digital image processing framework, and PSP tubes. External programs can be linked for a seamless round-trip workflow and files can be sent directly for processing in third-party design applications. Custom functionality is further supported through scripting and macro recording. == Early history == Developed by two brothers, Gerhard Huber and Martin Huber, PhotoLine was first released in January 1996 on the Atari ST line of personal computers from Atari Corporation. Previously, Gerhard and Martin had worked on making graphics cards for Atari computers and writing drivers for image scanners. Atari's market share was declining, and the brothers considered developing a video game to expand the business. This led them to search for image editing software that would run on Atari computers and fit their game project. Only an image editor called tms Cranach came close to what Gerhard and Martin had in mind. tms Cranach was a Raster graphics editor running on Atari's MegaST/STe, TT030, and Falcon030 systems. However, Cranach turned out to be expensive software and complicated to use. The brothers contacted tms (Cranach's developers) and this resulted in an offer from tms to purchase Cranach and its source code, as tms intended to exit the Atari software market. After the purchase of Cranach and its source code Gerhard and Martin initially continued to sell Cranach, but sales were low. In 1995 the two decided to start developing a new graphics editor called "PhotoLine". PhotoLine was developed from scratch and written in C++. It nevertheless contained a lot of know-how from Cranach (which was written in C). PhotoLine first release was launched one year later in 1996. With the growing popularity of Microsoft Windows, the release of Windows 95, and the limiting graphics hardware on the Atari platforms, the developers switched development platforms and continued development of PhotoLine for Windows only. The first Windows version (PhotoLine 2.2) was released in the middle of 1997. Shortly after, the Atari version was discontinued and saw its final release as PhotoLine 2.30. The Huber brothers released this final Atari version into the public domain in 2012. The first Classic Mac OS version of PhotoLine 6 appeared in 1999 after many ex-Atari users who had switched to Mac OS pressured the PhotoLine developers to release an Apple port. == Linux Support == PhotoLine runs natively under Windows and MacOS. While a native Linux version of PhotoLine is not available, running PhotoLine under Wine is actively supported and maintained by the developers. Running PhotoLine under Linux/Wine PhotoLine enables the user to allow Little CMS to fully support color management under Linux instead of the native OS CMS. == File format == Native PhotoLine files have the extension .PLD, which is an abbreviation of "PhotoLine Document". It can contain embedded JPEG, PNG, or camera raw images. It contains a preview image in JPEG or PNG format, which is used by the operating system or third-party applications to display a thumbnail of its contents. Thumbnails are natively supported on MacOS X. During installation on Windows the user is presented with an option to install a PLD thumbnail preview driver which enables thumbnails of PLD content in Windows Explorer. Alternatively, the FastPictureViewer Standalone Codec Pack provides the ability to display PLD thumbnails in Windows Explorer. == Version History == PhotoLine was first developed for the Atari ST computer. Version 2 was the first version for Windows, and since version 6 PhotoLine is also available for MacOS.

    Read more →
  • Cups (app)

    Cups (app)

    Cups (stylized as CUPS) was a mobile app launched in New York City in April 2014. It was a mobile payment and discovery platform for independent coffee shops nearby. The app was active in more than 400 cafes in New York, San Francisco, Philadelphia, Nashville, Minneapolis and Saint Paul, and other U.S. cities. == History == Cups was founded in Israel in 2012 by Gilad Rotem and four other co-founders, who were all high school friends. The company ran a limited beta pilot in Tel Aviv and Jerusalem, featuring 80 locations, from September 2012 until September 2014. Customers received all-you-can-drink coffee at certain coffee shops in Tel Aviv for approximately $45 a month. In October 2013, the founders relocated to New York. Cups participated in the Entrepreneur's Roundtable Accelerator program and went live in New York in 2014, initially working with 50 small coffee shops in Manhattan and Brooklyn. In early 2016, the company launched 30 locations in Philadelphia in February, followed by 40 more locations in San Francisco in March. == Functionality == The Cups app gave the user a list of the nearest participating coffee shops to their current location. The app user can order a drink using the app and pay the cashier with their phone. The cashier would enter a code that entered the purchase into the app's system. The app also allowed for onboard tipping and food purchases. The company reimbursed the coffee shop and kept a portion of their sales. In early 2016, the Cups Café Network was launched, using bulk purchasing power to land discounts with service providers which would normally be reserved for larger chains. In this way, the company aimed to help its café partners compete with the larger coffee chains.

    Read more →
  • Audio-visual speech recognition

    Audio-visual speech recognition

    Audio visual speech recognition (AVSR) is a technique that uses image processing capabilities in lip reading to aid speech recognition systems in recognizing indeterministic phones or giving preponderance among near probability decisions. Each system of lip reading and speech recognition works separately, then their results are mixed at the stage of feature fusion. As the name suggests, it has two parts. First one is the audio part and second one is the visual part. In audio part we use features like log mel spectrogram, mfcc etc. from the raw audio samples and we build a model to get feature vector out of it . For visual part generally we use some variant of convolutional neural network to compress the image to a feature vector after that we concatenate these two vectors (audio and visual ) and try to predict the target object.

    Read more →
  • Human image synthesis

    Human image synthesis

    Human image synthesis is technology that can be applied to make believable and even photorealistic renditions of human-likenesses, moving or still. It has effectively existed since the early 2000s. Many films using computer generated imagery have featured synthetic images of human-like characters digitally composited onto the real or other simulated film material. Towards the end of the 2010s deep learning artificial intelligence has been applied to synthesize images and video that look like humans, without need for human assistance, once the training phase has been completed, whereas the old school 7D-route required massive amounts of human work. == Timeline of human image synthesis == In 1971 Henri Gouraud made the first CG geometry capture and representation of a human face. Modeling was his wife Sylvie Gouraud. The 3D model was a simple wire-frame model and he applied the Gouraud shader he is most known for to produce the first known representation of human-likeness on computer. The 1972 short film A Computer Animated Hand by Edwin Catmull and Fred Parke was the first time that computer-generated imagery was used in film to simulate moving human appearance. The film featured a computer simulated hand and face (watch film here). The 1976 film Futureworld reused parts of A Computer Animated Hand on the big screen. The 1983 music video for song Musique Non-Stop by German band Kraftwerk aired in 1986. Created by the artist Rebecca Allen, it features non-realistic looking, but clearly recognizable computer simulations of the band members. The 1994 film The Crow was the first film production to make use of digital compositing of a computer simulated representation of a face onto scenes filmed using a body double. Necessity was the muse as the actor Brandon Lee portraying the protagonist was tragically killed accidentally on-stage. In 1999 Paul Debevec et al. of USC captured the reflectance field of a human face with their first version of a light stage. They presented their method at the SIGGRAPH 2000 In 2003 audience debut of photo realistic human-likenesses in the 2003 films The Matrix Reloaded in the burly brawl sequence where up-to-100 Agent Smiths fight Neo and in The Matrix Revolutions where at the start of the end showdown Agent Smith's cheekbone gets punched in by Neo leaving the digital look-alike unnaturally unhurt. The Matrix Revolutions bonus DVD documents and depicts the process in some detail and the techniques used, including facial motion capture and limbal motion capture, and projection onto models. In 2003 The Animatrix: Final Flight of the Osiris a state-of-the-art want-to-be human likenesses not quite fooling the watcher made by Square Pictures. In 2003 digital likeness of Tobey Maguire was made for movies Spider-man 2 and Spider-man 3 by Sony Pictures Imageworks. In 2005 the Face of the Future project was an established. by the University of St Andrews and Perception Lab, funded by the EPSRC. The website contains a "Face Transformer", which enables users to transform their face into any ethnicity and age as well as the ability to transform their face into a painting (in the style of either Sandro Botticelli or Amedeo Modigliani). This process is achieved by combining the user's photograph with an average face. In 2009 Debevec et al. presented new digital likenesses, made by Image Metrics, this time of actress Emily O'Brien whose reflectance was captured with the USC light stage 5 Motion looks fairly convincing contrasted to the clunky run in the Animatrix: Final Flight of the Osiris which was state-of-the-art in 2003 if photorealism was the intention of the animators. In 2009 a digital look-alike of a younger Arnold Schwarzenegger was made for the movie Terminator Salvation though the end result was critiqued as unconvincing. Facial geometry was acquired from a 1984 mold of Schwarzenegger. In 2010 Walt Disney Pictures released a sci-fi sequel entitled Tron: Legacy with a digitally rejuvenated digital look-alike of actor Jeff Bridges playing the antagonist CLU. In SIGGGRAPH 2013 Activision and USC presented a real-time "Digital Ira" a digital face look-alike of Ari Shapiro, an ICT USC research scientist, utilizing the USC light stage X by Ghosh et al. for both reflectance field and motion capture. The end result both precomputed and real-time rendering with the modernest game GPU shown here and looks fairly realistic. In 2014 The Presidential Portrait by USC Institute for Creative Technologies in conjunction with the Smithsonian Institution was made using the latest USC mobile light stage wherein President Barack Obama had his geometry, textures and reflectance captured. In 2014 Ian Goodfellow et al. presented the principles of a generative adversarial network. GANs made the headlines in early 2018 with the deepfakes controversies. For the 2015 film Furious 7 a digital look-alike of actor Paul Walker who died in an accident during the filming was done by Weta Digital to enable the completion of the film. In 2016 techniques which allow near real-time counterfeiting of facial expressions in existing 2D video have been believably demonstrated. In 2016 a digital look-alike of Peter Cushing was made for the Rogue One film where its appearance would appear to be of same age as the actor was during the filming of the original 1977 Star Wars film. In SIGGRAPH 2017 an audio driven digital look-alike of upper torso of Barack Obama was presented by researchers from University of Washington. It was driven only by a voice track as source data for the animation after the training phase to acquire lip sync and wider facial information from training material consisting 2D videos with audio had been completed. Late 2017 and early 2018 saw the surfacing of the deepfakes controversy where porn videos were doctored using deep machine learning so that the face of the actress was replaced by the software's opinion of what another persons face would look like in the same pose and lighting. In 2018 Game Developers Conference Epic Games and Tencent Games demonstrated "Siren", a digital look-alike of the actress Bingjie Jiang. It was made possible with the following technologies: CubicMotion's computer vision system, 3Lateral's facial rigging system and Vicon's motion capture system. The demonstration ran in near real time at 60 frames per second in the Unreal Engine 4. In 2018 at the World Internet Conference in Wuzhen the Xinhua News Agency presented two digital look-alikes made to the resemblance of its real news anchors Qiu Hao (Chinese language) and Zhang Zhao (English language). The digital look-alikes were made in conjunction with Sogou. Neither the speech synthesis used nor the gesturing of the digital look-alike anchors were good enough to deceive the watcher to mistake them for real humans imaged with a TV camera. In September 2018 Google added "involuntary synthetic pornographic imagery" to its ban list, allowing anyone to request the search engine block results that falsely depict them as "nude or in a sexually explicit situation." In February 2019 Nvidia open sources StyleGAN, a novel generative adversarial network. Right after this Phillip Wang made the website ThisPersonDoesNotExist.com with StyleGAN to demonstrate that unlimited amounts of often photo-realistic looking facial portraits of no-one can be made automatically using a GAN. Nvidia's StyleGAN was presented in a not yet peer reviewed paper in late 2018. At the June 2019 CVPR the MIT CSAIL presented a system titled "Speech2Face: Learning the Face Behind a Voice" that synthesizes likely faces based on just a recording of a voice. It was trained with massive amounts of video of people speaking. Since 1 July 2019 Virginia has criminalized the sale and dissemination of unauthorized synthetic pornography, but not the manufacture., as § 18.2–386.2 titled 'Unlawful dissemination or sale of images of another; penalty.' became part of the Code of Virginia. The law text states: "Any person who, with the intent to coerce, harass, or intimidate, maliciously disseminates or sells any videographic or still image created by any means whatsoever that depicts another person who is totally nude, or in a state of undress so as to expose the genitals, pubic area, buttocks, or female breast, where such person knows or has reason to know that he is not licensed or authorized to disseminate or sell such videographic or still image is guilty of a Class 1 misdemeanor.". The identical bills were House Bill 2678 presented by Delegate Marcus Simon to the Virginia House of Delegates on 14 January 2019 and three-day later an identical Senate bill 1736 was introduced to the Senate of Virginia by Senator Adam Ebbin. Since 1 September 2019 Texas senate bill SB 751 amendments to the election code came into effect, giving candidates in elections a 30-day protection period to the elections during which making and distributing digital look-alikes or synthetic fakes of the candidates is an offense. Th

    Read more →
  • ArcSoft ShowBiz

    ArcSoft ShowBiz

    ShowBiz is a video editor by ArcSoft for the Windows operating system. It can create VCD and DVDs and can also export to the formats AVI, MPEG, WMV, and MOV. ShowBiz also contains a DVD burning and menu building feature. As of 2003, it was one of the three most dominant bundled titles. == Reception == PC Magazine reviewer Jan Ozer states: "ArcSoft's ShowBiz has evolved into a competent editor that's generally more usable than Dazzle's MovieStar program, providing more configuration controls, better preview features, and a much greater range of fun effects." John Virata, senior editor of Digital Media Online, says in his three page review of ShowBiz DVD 2, "It is an easy editor to work with and has a logically laid out interface that takes you step by step through the video creation and DVD creation process"

    Read more →
  • BeHafizh

    BeHafizh

    BeHafizh is a mobile application to assist in the effort to memorize Qur'anic verses. The software runs on the Android operating system. This application was made by a team from Gadjah Mada University (UGM) consisting of Farid Amin Ridwanto, Rian Adam Rajagede and Alfian Try Putranto in order to participate in the National Student Musabaqoh Tilawatil Quran (MTQ) held at University of Indonesia (UI) on 1- August 8, 2015. This application then won a gold medal in the branch of Computer Application Design in the competition. == Features == === Audio Player === Audio player, paragraph can be played repeatedly, with pause, and can be done on a certain range of Quranic verses. === Memorization Test === Memorization testing continues users to improve their memorization. Memorization Recorders improves user's ability to recite Quran. === Colour indicators === === Achievements === === Reminders ===

    Read more →
  • Automated restaurant

    Automated restaurant

    An automated restaurant or robotic restaurant is a restaurant that uses robots to do tasks such as delivering food and drink to the tables or cooking the food. Restaurant automation means the use of a restaurant management system to automate some or occasionally all of the major operations of a restaurant establishment. More recently, restaurants are opening that have completely or partially automated their services. These may include: taking orders, preparing food, serving, and billing. A few fully automated restaurants operate without any human intervention whatsoever. Robots are designed to help and sometimes replace human labour (such as waiters and chefs). The automation of restaurants may also allow for the option for greater customization of an order. == History == === Vending machines === In the late 19th and early 20th century a number of restaurants served food solely through vending machines. These restaurants were called automats or, in Japan, shokkenki. Customers ordered their food directly through the machines. === Sushi conveyors === Yoshiaki Shiraishi is a Japanese innovator who is known for the creation of conveyor belt sushi. He had the idea following difficulty staffing his small sushi restaurant and managing the restaurant on his own. He was inspired seeing beer bottles on a conveyor belt in an Asahi brewery. Yoshiaki's restaurants are an early example of restaurant automation; they used a conveyor belt to distribute dishes around the restaurant, eliminating the need for waiters. This example of automation dates back to the Japanese economic miracle; the first of Yoshiaki's conveyor belt sushi restaurants was opened under the name Mawaru Genroku Sushi in 1958, in Osaka. === Partial automation === As of 2011, across Europe, McDonald's had already begun implementing 7,000 touch screen kiosks that could handle cashiering duties. From 2015 to 2020, Zume had an automated pizza parlor. Later companies would try to produce smaller, less ambitious devices, with one robotics company producing a machine that could automate the slowest and most repetitive parts of assembling a pizza, such as spreading pizza sauce or placing slices of pepperoni, while leaving other customizations to employees. In 2020, a restaurant in the Netherlands began trialling the use of a robot to serve guests. In September 2021, Karakuri's 'Semblr' food service robot served personalised lunches for the 4,000 employees of grocery technology solutions provider ocado Group's head offices in Hatfield, UK. 2,700 different combinations of dishes were on offer. Customers could specify in grams what hot and cold items, proteins, sauces and fresh toppings they wanted. In 2021, Columbia University School of Engineering and Applied Science engineers developed a method of cooking 3D printed chicken with software-controlled robotic lasers. The “Digital Food” team exposed raw 3D printed chicken structures to both blue and infrared light. They then assessed the cooking depth, colour development, moisture retention and flavour differences of the laser-cooked 3D printed samples in comparison to stove-cooked meat. In June 2022 a California nonprofit chain of residential communities, Front Porch, experimented with robots in dining rooms at two locations to supplement wait staff by carrying plated food and drink to tables, and removing dishes. 65% of residents found the robots helpful, with 51% saying they let the staff spend more quality time with diners. 51% of staff were "excited" and 58% said they enabled more quality time with diners. The chain has 19 senior living communities (and 35 affordable housing communities), so it has potential to expand robots to more dining rooms. It is shifting to memory care, which may affect plans. == Rationales == === Advantages === Efficiency: Automated restaurants can significantly enhance operational efficiency by minimizing human error and reducing service time. With automated ordering, payment, and food preparation systems, customers can enjoy faster service and reduced waiting times. Cost savings: By reducing the need for human staff, automated restaurants can potentially lower labor costs. This can be particularly beneficial in areas with high labor expenses, as it allows for better resource allocation and cost management. Consistency: Automation ensures consistency in food quality and presentation. With precise portion control and standardized cooking methods, customers can expect the same quality and taste in their meals every time they visit. Enhanced customer experience: Self-service kiosks and automated systems provide customers with control and convenience. They can customize their orders, browse through menu options, and pay seamlessly, creating a more interactive and satisfying dining experience. === Disadvantages === Lack of personal touch: Automated restaurants may lack the personal interaction and warmth that traditional restaurants provide. Some customers prefer the human touch, personalized recommendations, and the social aspect of dining out. Technical issues: Reliance on technology means that technical glitches and malfunctions can occur, resulting in service disruptions or delays. Maintenance and technical support become critical in ensuring smooth operations. Limited menu complexity: The automation process may be better suited for standardized menu items rather than complex or customized dishes. The ability to cater to unique dietary preferences or accommodate special requests may be limited. Employment implications: Automated restaurants may result in job losses for traditional restaurant staff, potentially impacting the local workforce. It is important to consider the social and economic implications of adopting such technology. == Locations == Automated restaurants have been opening in many countries. Examples include: Nala Restaurant in Naperville, Illinois Fritz's Railroad Restaurant in Kansas City, Kansas Výtopna, a Railway Restaurant using model trains: franchise of various restaurants and coffeehouses in the Czech Republic Bagger's Restaurant in Nuremberg, Germany FuA-Men Restaurant, a ramen restaurant located in Nagoya, Japan Fōster Nutrition in Buenos Aires, Argentina Dalu Robot Restaurant in Jinan, China Haohai Robot Restaurant in Harbin, China Robot Kitchen Restaurant in Hong Kong Robo-Chef restaurant in Tehran, Iran, started in 2017, is the first robotic and "waiterless" restaurant of the Middle East. MIT graduates opened Spyce Kitchens in downtown Boston, Massachusetts, in 2018 Foodom, under Country Garden Holdings, opened January 12, 2020, in Guangzhou, China Robot Chacha, the first robot restaurant of India, is planning to open in the capital city of New Delhi. Kura Revolving Sushi Bar, with a number of locations in the United States, uses a tablets at tables for ordering, a conveyor belt to deliver food, and robots to deliver drinks and condiments. Chipotle Mexican Grill is beginning to deploy the Hyphen Makeline, which assembles up to 350 bowls and salads automatically per hour, and Chippy, an automatic tortilla chip fryer made by Miso Robotics. Serious Dumplings in Boca Raton, Florida

    Read more →
  • ArcObjects

    ArcObjects

    ArcObjects is a development environment of the ArcGIS family of applications. Using Visual Basic for Applications, C# or Java SDK for ArcGIS, it allows developers to extend these applications.ArcObjects is a library of Component Object Model (COM) components that build up the foundation of Esri's ArcGIS platform. ArcObjects is written primarily in the C++ programming language. Since ArcGIS is completely built on top of ArcObjects, the ArcGIS platform can be fully customized and extended by making use of its COM services and capabilities. This allows for easy extension of the ArcObjects data model with any programming language that is compatible with COM, such as Visual Basic, C#, Visual Basic.NET, Java and Python. COM enables components to be reused at a binary level, meaning developers do not require access to the source code of ArcObjects in order to extend the ArcGIS platform. For this reason, an ArcObjects programmer can make use of any type inside the ArcObjects system without knowing the implementation details of the type, only needing to know what the type is able to do. The ArcObjects data model is based on the COM standard, which makes it compatible with other COM objects and applications. This allows for easy integration and collaboration with other systems that are also based on the COM standard. The ArcGIS platform was built using ArcObjects types, such as classes, interfaces, and enumerations. ArcObjects use COM interfaces to organize and communicate properties and methods of its classes, ensuring compatibility with other COM-based objects and systems. When working with an ArcObjects COM class, its properties and methods are accessed solely through one of its implemented interfaces via the process of Query Interface (QI). Multiple interfaces are commonly available for classes in ArcObjects. For example, it is possible to query for additional interfaces implemented by an object after instantiation via the process of QI. Although only one interface can be used when instantiating an object, multiple interfaces are often available for classes in ArcObjects, allowing for greater flexibility and compatibility with other systems based on the COM standard.

    Read more →
  • Be My Eyes

    Be My Eyes

    Be My Eyes is a Danish mobile app that aims to help blind and visually impaired people to recognize objects and manage everyday situations. An online community of sighted volunteers receive photos or videos from randomly assigned affected individuals and assist via live chat. In 2023, the company launched Be My AI, an AI-based interface to help blind and visually impaired users describe images. The app is currently available for Android, iOS, and Windows. == History == === Founding and early years === The app was developed and marketed by Hans Jørgen Wiberg. He had demonstrated that although there are video chat software such as Skype and FaceTime, none is tailored for the visually impaired. For development, he joined forces with the Danish Association of the Blind, and other organizations. The app was first presented at an event for start-up companies in 2012 and first released in 2015. A version for Android was released in 2017, in addition to the iOS version. Praise was given for easy use of the app. The lack of sufficient data protection, which makes it possible to pass on data to third parties, was criticized. === Recent developments === The company has raised over $650,000, including funding from Silicon Valley, Microsoft, and other angel investors. In February 2020, $2.8 million in Series A funding was raised, allowing the company to further develop its business model while keeping visual support services free for visually impaired users. The investment allows the company to further develop its unique "purpose and profit" business model while keeping the visual support service free and unlimited for all visually impaired users. === User base and accessibility === Over 9.3 million volunteers and 900,000 blind or visually impaired people use the app. == Features == === Human-based assistance === A visually impaired person starts a live stream showing their view from their cellphone camera. They are assigned, through a phone call or chat, a random volunteer who speaks the same language and who is in the same time zone. This allows the volunteer to describe an object and assist the visually impaired person, such as guiding the person to move their camera, read instructions, or clean up a spill. Through speech synthesis, content can be read out loud. This process encourages a more independent life for blind and visually impaired people. === Be My AI === In March of 2023, Be My Eyes launched Be My AI, an AI-based virtual assistant. Be My AI is accessible through the Be My Eyes app, and is based on OpenAI's GPT-4 large language model. Through the interface, the app allows blind and visually impaired users to send images from a variety of devices to be described. The app allows users to then follow up with questions to further tailor the image description. Blind users report using Be My AI for a variety of tasks, including reading menus, identifying clothing, and describing people. The Be My AI interface is available on Android, iOS, and Windows. Within a few weeks of the interface's roll out, the company reported that it had been used one million times, and it was named among Time's best inventions of 2023. Be My AI is part of a growing number of AI-based apps and devices designed to help blind and visually impaired individuals. == Partnerships == === Microsoft === In November 2023, Be My Eyes entered a partnership with Microsoft to share data to help improve accessibility-focused AI models. === Meta === In 2024, Be My Eyes integrated with Ray-Ban Meta smart glasses, a wearable product developed by Meta and EssilorLuxottica. The partnership enabled users to receive hands-free, real-time visual descriptions and volunteer assistance by using voice commands through the smart glasses. === Hilton === In October 2024, Hilton partnered with Be My Eyes to provide live video assistance for blind and low-vision guests. The free service connects travelers to a Hilton team member that can guide them through tasks like adjusting thermostats, opening window shades, or navigating hotel amenities. This collaboration progressed from a prior arrangement where Hilton helped train Be My Eyes' GPT-4 powered AI model to better recognize objects and layouts in hotel rooms. === Tesco === In October 2025, retailer Tesco announced its partnership with Be My Eyes to launch a six-month pilot aimed at improving in-store accessibility in the UK. The initiative was launched on World Sight Day, 9 October, enabling Be My Eyes users to connect directly with Tesco staff via the app for personalised visual assistance while shopping, Euronewsweek reported. == Awards == Nordic Startup Awards for "Best Social Entrepreneurial Tech Startup" in Denmark 2021 Apple Design Award for best social impact

    Read more →
  • Paint.NET

    Paint.NET

    Paint.NET (sometimes stylized as paint.net) is a freeware general-purpose raster graphics editor program for Microsoft Windows, developed with the .NET platform. Paint.NET was originally created by Rick Brewster as a Washington State University student project, and has evolved from a simple replacement for the Microsoft Paint program into a program for editing mainly graphics, with support for plugins. == History == Paint.NET originated as a computer science senior design project by Rick Brewster during spring 2004 at Washington State University. Version 1.0 consisted of 36,000 lines of code and was written in four months. In contrast, version 3.35 has approximately 162,000 lines of code. The Paint.NET project continued over the summer and into the autumn 2004 semester for both the version 1.1 and 2.0 releases. Development continued with one programmer who worked on previous versions of Paint.NET while he was a student at WSU. As of May 2006 the program had been downloaded at least 2 million times, at a rate of about 180,000 per month. Initially, Paint.NET was released under a modified version of the MIT License, with the exclusion of the installer, text, and graphics. However, citing issues with the open source code being plagiarized by others that had rebranded the software as their own and bundled user content without their permission, the availability of the source code was restricted, in December 2007 Brewster announced his intent to restrict access to components of the program (including its installer, resources, and user interface). In November 2009, the software was made proprietary, restricting the sale or creation of derivative works of the software. Starting with version 4.0.18, Paint.NET is published in two editions: A classic edition remains freeware, similar to all other versions since 3.5. Another edition, however, is published to Microsoft Store under a trialware license and is available to purchase for US$14.99. According to the developer, this was done to enable the users to contribute to the development with more convenience, even though the old avenue of donation was not closed. In May 2026, Brewster revealed that he obtained the paint.net domain after attempting to do so for 22 years. Historically, the editor was hosted on getpaint.net, and according to Brewster, the previous owners of paint.net would not sell the domain and asked for "lots and lots of money". In December of the previous year, paint.net began hosting content that impersonated Paint.NET, therefore becoming a clear case of trademark infringement and domain squatting. Brewster stated that he was able to obtain the domain afterwards with the help of a lawyer. == Overview == Paint.NET is primarily programmed in the C# programming language. Its native image format, .PDN, is a compressed representation of the application's internal object format, which preserves layering and other information. == Plugins == Paint.NET supports plugins, which add image adjustments, effects, and support for additional file types. They can be programmed using any .NET Framework programming language, though they are most commonly written in C#. These are created by volunteer coders on the program's discussion board, the Paint.NET Forum. Though most are simply published via the discussion board, some have been included with a later release of the program. For instance, a DirectDraw Surface file type plugin, (originally by Dean Ashton) and an Ink Sketch and Soften Portrait effect (originally by David Issel) were added to Paint.NET in version 3.10. Hundreds of plugins have been produced; such as Shape3D, which renders a 2D drawing into a 3D shape. Some plugins expand on the functionality that comes with Paint.NET, such as Curves+ and Sharpen+, which extend the included tools Curves and Sharpen, respectively. Examples of file type plugins include an Animated Cursor and Icon plugin and an Adobe Photoshop file format plugin. Several of these plugins are based on existing open source software, such as a raw image format plugin that uses dcraw and a PNG optimization plugin that uses OptiPNG. == Forks == === paint-mono === Paint.NET was created exclusively for Windows and has no native support for other operating systems. Due to its former open-source licensing, the development of alternative versions was possible. In May 2007, Miguel de Icaza officially started a porting project called paint-mono. This project had partially ported Paint.NET 3.0 to Mono, an open-source implementation of the Common Language Infrastructure on which the .NET Framework is based. This allowed Paint.NET to be run on Mono-supported platforms, such as Linux. This port is no longer maintained and has not been updated since March 2009. Newer Mono runtime 6 versions are able to run original Paint.NET releases up to 3.5.11 with only minor issues. === Pinta === In 2010, developer Jonathan Pobst started a project called Pinta, describing it as a clone of Paint.NET for Mono and Gtk#. Pinta reused the adjustments and effects code from Paint.NET but otherwise is original code.

    Read more →