AI Generator Qr Code

AI Generator Qr Code — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Jaggies

  Jaggies are visual artifacts in raster images, most frequently from aliasing, which in turn is often caused by non-linear mixing effects producing high-frequency components, or missing or poor anti-aliasing filtering prior to sampling. Jaggies are stair-like lines that appear where there should be "smooth" straight lines or curves. For example, when a nominally straight, un-aliased line steps across one pixel either horizontally or vertically, a "dogleg" occurs halfway through the line, where it crosses the threshold from one pixel to the other. Jaggies should not be confused with most compression artifacts, which are a different phenomenon. == Causes == Jaggies occur due to the "staircase effect". This is because a line represented in raster mode is approximated by a sequence of pixels. Jaggies can occur for a variety of reasons, the most common being that the output device (display monitor or printer) does not have sufficient resolution to portray a smooth line. In addition, jaggies often occur when a bit-mapped image is scaled to a higher resolution. This is one of the advantages that vector graphics have over bitmapped graphics – a vector image can be losslessly scaled to any arbitrary resolution or stretched infinitely in either axis without introducing jaggies. == Solutions == The effect of jaggies can be reduced by a graphics technique known as spatial anti-aliasing. Anti-aliasing smooths out jagged lines by surrounding them with transparent pixels to simulate the appearance of fractionally-filled pixels when viewed at a distance. The downside of anti-aliasing is that it reduces contrast – rather than sharp black/white transitions, there are shades of gray – and the resulting image can appear fuzzy. This is an inescapable trade-off: if the resolution is insufficient to display the desired detail, the output will either be jagged, fuzzy, or some combination thereof. While machine learning-based upscaling techniques such as DLSS can be used to infer this missing information, other types of artifacts may be introduced in the process. In real-time 3D rendering such as in video games, various anti-aliasing techniques are used to remove jaggies created by the edges of polygons and other contrasting lines. Since anti-aliasing can impose a significant performance overhead, games for home computers often allow users to choose the level and type of anti-aliasing in use in order to optimize their experience, whereas on consoles this setting is typically fixed for each title to ensure a consistent experience. While anti-aliasing is generally implemented through graphics APIs like DirectX and Vulkan, some consoles such as the Xbox 360 and PlayStation 3 are also capable of anti-aliasing to little direct performance cost by way of dedicated hardware which performs anti-aliasing on the contents of the framebuffer once it has been rendered by the GPU. Jaggies in bitmaps, such as sprites and surface materials, are most often dealt with by separate texture filtering routines, which are far easier to perform than anti-aliasing filtering. Texture filtering became ubiquitous on PCs after the introduction of 3Dfx's Voodoo GPU. == Notable uses of the term == In the 1985 game Rescue on Fractalus! for the Atari 8-bit computers, the graphics depicting the cockpit of the player's spacecraft contains two window struts, which are not anti-aliased and are therefore very "jagged". The developers made fun of this and named the in-game enemies "Jaggi", and also initially titled the game Behind Jaggi Lines!. The latter idea was scrapped by the marketing department before release.

  Read more →
• 

  Operation Serenata de Amor

  Operation Serenata de Amor is an artificial intelligence project designed to analyze public spending in Brazil. The project has been funded by a recurrent financing campaign since September 7, 2016, and came in the wake of major scandals of misappropriation of public funds in Brazil, such as the Mensalão scandal and what was revealed in the Operation Car Wash investigations. The analysis began with data from the National Congress then expanded to other types of budget and instances of government, such as the Federal Senate. The project is built through collaboration on GitHub and using a public group with more than 600 participants on Telegram. The name "Serenata de Amor," which means "serenade of love," was taken from a popular cashew cream bonbon produced by Chocolates Garoto in Brazil. == Modules == Throughout development of the project, new modules have been newly introduced in addition to the main repository: The main repository, serenata-de-amor, serves as the starting point for investigative work. Rosie is the robot programmed to identify public funds expenses with discrepancies, starting with CEAP (Quota for Exercise of Parliamentary Activity); it analyzes each of the reimbursements requested by the deputies and senators, indicating the reasons that lead it to believe they are suspicious. From Rosie was born whistleblower, which tweets under the name of @RosieDaSerenata, distributing the results found on social media. Jarbas (Github repository) is a data visualization tool which shows a complete list of reimbursements made available by the Chamber of Deputies and mined by Rosie. Toolbox is a Python installable package that supports the development of Serenata de Amor and Rosie. == History == Operation Serenata de Amor is an Artificial intelligence project for analysis of public expenditures. It was conceived in March 2016 by data scientist Irio Musskopf, sociologist Eduardo Cuducos and entrepreneur Felipe Cabral. The project was financed collectively in the Catarse platform, where it reached 131% of the collection goal paying 3 months of project development. Ana Schwendler, also a data scientist, Pedro Vilanova "Tonny", data journalist, Bruno Pazzim, software engineer, Filipe Linhares, a frontend engineer, Leandro Devegili, an entrepreneur and André Pinho took the first steps towards constructing the platform, such as collecting and structuring the first datasets. Jessica Temporal, data scientist and Yasodara Córdova "Yaso", researcher, Tatiana Balachova "Russa", UX designer, joined the project after the financing took place. The members created a recurring financing campaign, expanding the analysis of public spending to the Federal Senate. Donors make monthly payments ranging from 5 BRL to 200 BRL to maintain group activities. The monthly amount collected is around 10,000 BRL. == Results == In January 2017, concluding the period financed by the initial campaign, the group carried out an investigation into the suspicious activities found by the data analysis system. 629 complaints were made to the Ombudsman's Office of the Chamber of Deputies, questioning expenses of 216 federal deputies. In addition, the Facebook project page has more than 25,000 followers, and users frequently cite the operation as a benchmark in transparency in the Brazilian government. One of the examples of results obtained by the operation is the case of the Deputy who had to return about 700 BRL to the House after his expenses were analyzed by the platform. The platform was able to analyze more than 3 million notes, raising about 8,000 suspected cases in public spending. The community that supports the work of the team benefits from open source repositories, with licenses open for the collaboration. So much so that the two main data scientists of the project presented it at the CivicTechFest in Taipei, obtaining several mentions even in the international press. The technical leader presented the project in Poland during DevConf2017 in Kraków. It was also presented in the Google News Lab in 2017. It was presented by Yaso, when she was the Director of the initiative, at the MIT Media Lab/Berkman Klein Center Initiative for Artificial Intelligence ethics, and at the Artificial Intelligence and Inclusion Symposium, an initiative of the Global Network of Internet & Society Centers (NoC). It was also presented both by Irio and Yaso at the Digital Harvard Kennedy School, over a lunch seminar, where the transparency of the platform and the main solutions found were discussed, so that the code and data are always available to verify its suitability. This infographic provides information about the first results of Operation Serenata de Amor, a project that analyzes open data on public spending to find discrepancies. The project was presented by Yaso to the House Audit and Control Committee of the Chamber of Deputies in August 2017, and raised the interest of House officials who work with open data. The operation has been a source of inspiration for other civic projects that aim to work with similar goals, demonstrating the broader impact of artificial intelligence also in industry in Brazil. Participation of several team members in events throughout Brazil and abroad can be found on the Internet, such as presentation at OpenDataDay, held at Calango Hackerspace in the Federal District, Campus Party Bahia, Campus Party Brasilia, Friends of Tomorrow, XIII National Meeting of Internal Control, in the event USP Talks Hackfest against corruption in João Pessoa, the latter being also highlighted in the National Press.

  Read more →
• 

  Data-driven model

  Data-driven models are a class of computational models that primarily rely on historical data collected throughout a system's or process' lifetime to establish relationships between input, internal, and output variables. Commonly found in numerous articles and publications, data-driven models have evolved from earlier statistical models, overcoming limitations posed by strict assumptions about probability distributions. These models have gained prominence across various fields, particularly in the era of big data, artificial intelligence, and machine learning, where they offer valuable insights and predictions based on the available data. == Background == These models have evolved from earlier statistical models, which were based on certain assumptions about probability distributions that often proved to be overly restrictive. The emergence of data-driven models in the 1950s and 1960s coincided with the development of digital computers, advancements in artificial intelligence research, and the introduction of new approaches in non-behavioural modelling, such as pattern recognition and automatic classification. == Key Concepts == Data-driven models encompass a wide range of techniques and methodologies that aim to intelligently process and analyse large datasets. Examples include fuzzy logic, fuzzy and rough sets for handling uncertainty, neural networks for approximating functions, global optimization and evolutionary computing, statistical learning theory, and Bayesian methods. These models have found applications in various fields, including economics, customer relations management, financial services, medicine, and the military, among others. Machine learning, a subfield of artificial intelligence, is closely related to data-driven modelling as it also focuses on using historical data to create models that can make predictions and identify patterns. In fact, many data-driven models incorporate machine learning techniques, such as regression, classification, and clustering algorithms, to process and analyse data. In recent years, the concept of data-driven models has gained considerable attention in the field of water resources, with numerous applications, academic courses, and scientific publications using the term as a generalization for models that rely on data rather than physics. This classification has been featured in various publications and has even spurred the development of hybrid models in the past decade. Hybrid models attempt to quantify the degree of physically based information used in hydrological models and determine whether the process of building the model is primarily driven by physics or purely data-based. As a result, data-driven models have become an essential topic of discussion and exploration within water resources management and research. The term "data-driven modelling" (DDM) refers to the overarching paradigm of using historical data in conjunction with advanced computational techniques, including machine learning and artificial intelligence, to create models that can reveal underlying trends, patterns, and, in some cases, make predictions Data-driven models can be built with or without detailed knowledge of the underlying processes governing the system behavior, which makes them particularly useful when such knowledge is missing or fragmented.

  Read more →
• 

  AI safety

  AI safety is an interdisciplinary field focused on preventing accidents, misuse, or other harmful consequences arising from artificial intelligence systems. It encompasses AI alignment (which aims to ensure AI systems behave as intended), monitoring AI systems for risks, and enhancing their robustness. The field is particularly concerned with existential risks posed by advanced AI models. Beyond technical research, AI safety involves developing norms and policies that promote safety, including advocacy for regulations at different levels of government. The field gained significant popularity in 2023, with rapid progress in generative AI and public concerns voiced by researchers and CEOs about potential dangers. During the 2023 AI Safety Summit, the United States and the United Kingdom both established their own AI Safety Institute. However, researchers have expressed concern that AI safety measures are not keeping pace with the rapid development of AI capabilities. == Motivations == Scholars discuss current risks from critical systems failures, bias, and AI-enabled surveillance, as well as emerging risks like technological unemployment, digital manipulation, weaponization, AI-enabled cyberattacks and bioterrorism. They also discuss speculative risks from losing control of future artificial general intelligence (AGI) agents, or from AI enabling perpetually stable dictatorships. === Existential safety === Some have criticized concerns about AGI, such as Andrew Ng who compared them in 2015 to "worrying about overpopulation on Mars when we have not even set foot on the planet yet". Stuart J. Russell on the other side urges caution, arguing that "it is better to anticipate human ingenuity than to underestimate it". AI researchers have widely differing opinions about the severity and primary sources of risk posed by AI technology – though surveys suggest that experts take high consequence risks seriously. In two surveys of AI researchers, the median respondent was optimistic about AI overall, but placed a 5% probability on an "extremely bad (e.g. human extinction)" outcome of advanced AI. In a 2022 survey of the natural language processing community, 37% agreed or weakly agreed that it is plausible that AI decisions could lead to a catastrophe that is "at least as bad as an all-out nuclear war". == History == Risks from AI began to be seriously discussed at the start of the computer age: Moreover, if we move in the direction of making machines which learn and whose behavior is modified by experience, we must face the fact that every degree of independence we give the machine is a degree of possible defiance of our wishes. In 1988 Blay Whitby published a book outlining the need for AI to be developed along ethical and socially responsible lines. From 2008 to 2009, the Association for the Advancement of Artificial Intelligence (AAAI) commissioned a study to explore and address potential long-term societal influences of AI research and development. The panel was generally skeptical of the radical views expressed by science-fiction authors but agreed that "additional research would be valuable on methods for understanding and verifying the range of behaviors of complex computational systems to minimize unexpected outcomes". In 2011, Roman Yampolskiy introduced the term "AI safety engineering" at the Philosophy and Theory of Artificial Intelligence conference, listing prior failures of AI systems and arguing that "the frequency and seriousness of such events will steadily increase as AIs become more capable". In 2014, philosopher Nick Bostrom published the book Superintelligence: Paths, Dangers, Strategies. He has the opinion that the rise of AGI has the potential to create various societal issues, ranging from the displacement of the workforce by AI, manipulation of political and military structures, to even the possibility of human extinction. His argument that future advanced systems may pose a threat to human existence prompted Elon Musk, Bill Gates, and Stephen Hawking to voice similar concerns. In 2015, dozens of artificial intelligence experts signed an open letter on artificial intelligence calling for research on the societal impacts of AI and outlining concrete directions. To date, the letter has been signed by over 8000 people including Yann LeCun, Shane Legg, Yoshua Bengio, and Stuart Russell. In the same year, a group of academics led by professor Stuart J. Russell founded the Center for Human-Compatible AI at the University of California Berkeley and the Future of Life Institute awarded $6.5 million in grants for research aimed at "ensuring artificial intelligence (AI) remains safe, ethical and beneficial". In 2016, the White House Office of Science and Technology Policy and Carnegie Mellon University announced The Public Workshop on Safety and Control for Artificial Intelligence, which was one of a sequence of four White House workshops aimed at investigating "the advantages and drawbacks" of AI. In the same year, Concrete Problems in AI Safety – one of the first and most influential technical AI Safety agendas – was published. In 2017, the Future of Life Institute sponsored the Asilomar Conference on Beneficial AI, where more than 100 thought leaders formulated principles for beneficial AI including "Race Avoidance: Teams developing AI systems should actively cooperate to avoid corner-cutting on safety standards". In 2018, the DeepMind Safety team outlined AI safety problems in specification, robustness, and assurance. The following year, researchers organized a workshop at ICLR that focused on these problem areas. In 2021, Unsolved Problems in ML Safety was published, outlining research directions in robustness, monitoring, alignment, and systemic safety. In 2023, Rishi Sunak said he wants the United Kingdom to be the "geographical home of global AI safety regulation" and to host the first global summit on AI safety. The AI safety summit took place in November 2023, and focused on the risks of misuse and loss of control associated with frontier AI models. During the summit the intention to create the International Scientific Report on the Safety of Advanced AI was announced. In 2024, The US and UK forged a new partnership on the science of AI safety. The MoU was signed on 1 April 2024 by US commerce secretary Gina Raimondo and UK technology secretary Michelle Donelan to jointly develop advanced AI model testing, following commitments announced at an AI Safety Summit in Bletchley Park in November. In 2025, an international team of 96 experts chaired by Yoshua Bengio published the first International AI Safety Report. The report, commissioned by 30 nations and the United Nations, represents the first global scientific review of potential risks associated with advanced artificial intelligence. It details potential threats stemming from misuse, malfunction, and societal disruption, with the objective of informing policy through evidence-based findings, without providing specific recommendations. == Research focus == AI safety research areas include robustness, monitoring, and alignment. === Robustness === ==== Adversarial robustness ==== AI systems are often vulnerable to adversarial examples or "inputs to machine learning (ML) models that an attacker has intentionally designed to cause the model to make a mistake". For example, in 2013, Szegedy et al. discovered that adding specific imperceptible perturbations to an image could cause it to be misclassified with high confidence. This continues to be an issue with neural networks, though in recent work the perturbations are generally large enough to be perceptible. The image on the right is predicted to be an ostrich after the perturbation is applied. (Left) is a correctly predicted sample, (center) perturbation applied magnified by 10x, (right) adversarial example. Adversarial robustness is often associated with security. Researchers demonstrated that an audio signal could be imperceptibly modified so that speech-to-text systems transcribe it to any message the attacker chooses. Network intrusion and malware detection systems also must be adversarially robust since attackers may design their attacks to fool detectors. Models that represent objectives (reward models) must also be adversarially robust. For example, a reward model might estimate how helpful a text response is and a language model might be trained to maximize this score. Researchers have shown that if a language model is trained for long enough, it will leverage the vulnerabilities of the reward model to achieve a better score and perform worse on the intended task. This issue can be addressed by improving the adversarial robustness of the reward model. More generally, any AI system used to evaluate another AI system must be adversarially robust. This could include monitoring tools, since they could also potentially be tampered with to produce a higher reward. Large language models (LLMs) can be vulnerable to prom

  Read more →
• 

  Outline of brain mapping

  The following outline is provided as an overview of and topical guide to brain mapping: Brain mapping – set of neuroscience techniques predicated on the mapping of (biological) quantities or properties onto spatial representations of the (human or non-human) brain resulting in maps. Brain mapping is further defined as the study of the anatomy and function of the brain and spinal cord through the use of imaging (including intra-operative, microscopic, endoscopic and multi-modality imaging), immunohistochemistry, molecular and optogenetics, stem cell and cellular biology, engineering (material, electrical and biomedical), neurophysiology and nanotechnology. == Broad scope == History of neuroscience History of neurology Brain mapping Human brain Neuroscience Nervous system. === The neuron doctrine === Neuron doctrine – A set of carefully constructed elementary set of observations regarding neurons. For more granularity, more current, and more advanced topics, see the cellular level section Asserts that neurons fall under the broader cell theory, which postulates: All living organisms are composed of one or more cells. The cell is the basic unit of structure, function, and organization in all organisms. All cells come from preexisting, living cells. The Neuron doctrine postulates several elementary aspects of neurons: The brain is made up of individual cells (neurons) that contain specialized features such as dendrites, a cell body, and an axon. Neurons are cells differentiable from other tissues in the body. Neurons differ in size, shape, and structure according to their location or functional specialization. Every neuron has a nucleus, which is the trophic center of the cell (The part which must have access to nutrition). If the cell is divided, only the portion containing the nucleus will survive. Nerve fibers are the result of cell processes and the outgrowths of nerve cells. (Several axons are bound together to form one nerve fibril. See also: Neurofilament. Several nerve fibrils then form one large nerve fiber. Myelin, an electrical insulator, forms around selected axons. Neurons are generated by cell division. Neurons are connected by sites of contact and not via cytoplasmic continuity. (A cell membrane isolates the inside of the cell from its environment. Neurons do not communicate via direct cytoplasm to cytoplasm contact.) Law of dynamic polarization. Although the axon can conduct in both directions, in tissue there is a preferred direction of transmission from cell to cell. Elements added later to the initial Neuron doctrine A barrier to transmission exists at the site of contact between two neurons that may permit transmission. (Synapse) Unity of transmission. If a contact is made between two cells, then that contact can be either excitatory or inhibitory, but will always be of the same type. Dale's law, each nerve terminal releases a single type of neurotransmitter. Some of the basic postulates in the Neuron doctrine have been subsequently questioned, refuted, or updated. See the cellular level section topics for additional information. === Map, atlas, and database projects === Brain Activity Map Project – 2013 NIH $3 billion project to map every neuron in the human brain in ten years, based upon the Human Genome Project. NIH Brain Research through Advancing Innovative Neurotechnologies (BRAIN) Initiative [1] Community outreach site for above where the public may comment [2] Human Brain Project (EU) – 1 billion euro, 10-year project to simulate the human brain with supercomputers. BigBrain A high-resolution 3D atlas of the human brain created as part of the HBP. Human Connectome Project – 2009 NIH $30 million project to build a network map of the human brain, including structural (anatomical) and functional elements. Emphasis included research into dyslexia, autism, Alzheimer's disease, and schizophrenia. See also Connectome a, comprehensive map of neural connections in the brain. Allen Brain Atlas – 2003 $100 million project funded by Paul Allen (Microsoft) BrainMaps – National Institute of Health (NIH) database including 60 terabytes of image scans of primate and non-primates, integrated with information covering structure and function. NeuroNames – Defines the brain in terms of about 550 primary structures (about 850 unique structures) to which all other structures, names, and synonyms are related. About 15,000 neuroanatomical terms are cross indexed, including many synonyms in seven languages. Coverage includes the brain and spinal cord of the four species most frequently studied by neuroscientists: human, macaque (monkey), rat and mouse. The controlled, standardized vocabulary for each structure is located in an unambiguous, strict physical hierarchy, and these terms are selected based on ease of pronunciation, mnemonic value, and frequency of use in recent neuroscientific publications. Relation of each structure to its superstructures and substructures is included. The controlled vocabulary is suitable for uniquely indexing neuroanatomical information in digital databases. Decade of the Brain 1990–1999 promotion by NIH and the Library of Congress "to enhance public awareness of the benefits to be derived from brain research". Communications targeted Members of Congress, staffs, and the general public to promote funding. Talairach Atlas see Jean Talairach Harvard Whole Brain Atlas see Human brain MNI Template see Medical image computing Blue Brain Project and Artificial brain International Consortium for Brain Mapping see Brain Mapping List of neuroscience databases NIH Toolbox National Institute of Health (USA) toolbox for the assessment of neurological and behavioral function Organization for Human Brain Mapping The Organization for Human Brain Mapping (OHBM) is an international society dedicated to using neuroimaging to discover the organization of the human brain. == Imaging and recording systems == This section covers imaging and recording systems. The general section covers history, neuroimaging, and techniques for mapping specific neural connections. The specific systems section covers the various specific technologies, including experimental and widely deployed imaging and recording systems. === General === Most imaging work to date on individual neurons has been conducted outside the brain, typically on large neurons, and has been most frequently destructive. New techniques are however rapidly emerging. Search on "Single neuron imaging" and see related topics: Biological neuron model, Single-unit recording, Neural oscillation, Computational neuroscience. dMRI (above) is also promising in non-destructive imaging of single neurons inside the brain. History of neuroimaging (redirects from Brain scanner) Neuroimaging (redirects from Brain function map) Connectomics – mapping technique showing neural connections in a nervous system. === Specific systems === Cortical stimulation mapping Diffusion MRI (dMRI) – includes diffusion tensor imaging (DTI) and diffusion functional MRI (DfMRI). dMRI is a recent breakthrough in brain mapping allowing the visualization of cross connections between different anatomical parts of the brain. It allows noninvasive imaging of white matter fiber structure and in addition to mapping can be useful in clinical observations of abnormalities, including damage from stroke. Electroencephalography (EEG) – uses electrodes on the scalp and other techniques to detect the electrical flow of currents. Electrocorticography – intracranial EEG, the practice of using electrodes placed directly on the exposed surface of the brain to record electrical activity from the cerebral cortex. Electrophysiological techniques for clinical diagnosis Functional magnetic resonance imaging (fMRI) Medical image computing (brain research of leads medical and surgical uses of mapping technology) Neurostimulation (in research stimulation is frequently used in conjunction with imaging) Positron emission tomography (PET) – a nuclear medical imaging technique that produces a three-dimensional image or picture of functional processes in the body. The system detects pairs of gamma rays emitted indirectly by a positron-emitting radionuclide (tracer), which is introduced into the body on a biologically active molecule. Three-dimensional images of tracer concentration within the body are then constructed by computer analysis. In modern scanners, three dimensional imaging is often accomplished with the aid of a CT X-ray scan performed on the patient during the same session, in the same machine. === Imaging and recording componentry === ==== Electrochemical ==== Haemodynamic response – the rapid delivery of blood to active neuronal tissues. Blood Oxygenation Level Dependent signal (BOLD), corresponds to the concentration of deoxyhemoglobin. The BOLD effect is based on the fact that when neuronal activity is increased in one part of the brain, there is also an increased amount of cerebral blood flow to that area. Functional m

  Read more →
• 

  Socially assistive robot

  A socially assistive robot (SAR) aids users through social engagement and support rather than through physical tasks and interactions. == Background == The field of socially assistive robotics emerged in the early 2000s, following the emergence of the field of social robots. In contrast to social robots, SARs aid users with specific goals related to behavior change rather than serving as purely social entities. The term "Socially assistive robot" was initially defined by Maja Matarić and David Feil-Seifer in 2005. Since its inception, the field has gained substantial recognition, featuring numerous research projects, a wealth of global research publications, startup companies, and a growing array of products on the consumer market. The COVID-19 pandemic has underscored the immense potential of socially assistive robots, particularly in addressing the needs of large user populations, including children engaged in remote learning, elderly individuals grappling with loneliness, and those affected by social isolation and its associated negative consequences. == Characteristics of interaction == SARs rely on artificial intelligence (AI) to generate real-time, responsive, natural, and meaningful robot behaviors during interactions with humans. The robots employ various forms of communication, such as facial expressions, gestures, body movements, and speech. In contrast to robots intended for physical tasks, SARs are designed to support and motivate users to perform their own tasks. The tasks a user engages in can be physical (e.g., rehabilitation exercises for post-stroke users), cognitive (e.g., dementia screening for elderly users), or social (e.g., turn-taking for users with autism spectrum disorders). This complex interaction involves detecting and interpreting the user's movement, behavior, intent, goals, speech, and preferences. Machine learning and robot learning techniques are frequently employed to enhance the robot's understanding of the user, predict user preferences, and provide effective assistance. The effectiveness of socially assistive robots is assessed based on objective measurements of user performance and improvement resulting from the robot’s assistance and support. Unlike other branches of robotics, where effectiveness depends on the robot's physical task completion, SAR measures the success of the robot based on the user's progress and achievements. This evaluation is carried out using quantitative objective metrics, such as time spent on tasks, accuracy, retention, and verbalization, as well as quantitative subjective metrics, such as user survey tools. SAR is based on the large body of evidence showing that users tend to respond more positively to interactions with physical robots compared to interactions with screens. Interaction with physical robots also encourages users to learn and retain more information than screen-based interactions. This fundamental insight underlines why physical robots in SAR applications are more effective, as opposed to interactions solely involving screens, tablets, or computers. == Uses and applications == SARs have been developed and validated in a wide array of applications, including healthcare, elder care, education, and training. For example, SARs have been developed to support children on the autism spectrum in acquiring and practicing social and cognitive skills, to motivate and coach stroke patients throughout their rehabilitation exercises, monitoring individuals health (ex. fall detection), and to encourage elderly users to be more physically and socially active. There is a concern that technophobia and lack of trust in robots will pose a barrier to the effectiveness of SARs in older adults.

  Read more →
• 

  Environmental impact of AI

  The environmental impact of the design, training, deployment and use of artificial intelligence includes the greenhouse gas emissions from generating electricity for data centres and computing hardware, operational and upstream water use, and material impacts from hardware manufacturing, mining and electronic waste. Estimating AI's environmental effects can be difficult because results depend on how impacts are measured, including whether accounting includes only model computation or also data-centre overhead, idle capacity, hardware manufacture, and local electricity supply. As these issues have received greater attention, governments and regulators have increasingly considered data-centre reporting requirements, energy-efficiency standards, and broader transparency measures for AI-related resource use. == Carbon footprint and energy use == AI-related energy use arises at multiple stages, including model training, fine-tuning, inference, storage, networking, and supporting infrastructure such as cooling and power conversion. === Individual level === Published estimates of energy use per AI request vary widely across models, tasks and measurement methods. A benchmark study presented at the 2024 ACM Conference on Fairness, Accountability, and Transparency found substantial differences between task types, with lower energy use for some text tasks and much higher energy use for image generation in the study's test conditions. In that benchmark, simple classification tasks consumed about 0.002–0.007 Wh per prompt on average (about 9% of a smartphone charge for 1,000 prompts), while text generation and text summarisation each used about 0.05 Wh per prompt; image generation averaged 2.91 Wh per prompt, and the least efficient image model in the study used 11.49 Wh per image (roughly equivalent to half a smartphone charge). First-party measurements in production environments have also been published. A 2025 Google study on Gemini assistant serving reported median per-prompt energy, emissions, and water-use estimates under the authors' accounting framework, while noting that different system boundaries can produce substantially different results. The study reported a median text-prompt estimate of about 0.24 Wh, which is roughly as much energy as watching nine seconds of television. The study also stated that software and infrastructure improvements reduced energy use by a factor of 33 and carbon emissions by a factor of 44 for a typical prompt over one year within the authors' framework. Researchers at the University of Michigan measured the energy consumption of various Meta Llama 3.1 models released in 2024 and found that smaller language models (8 billion parameters) use about 114 joules (0.03167 Wh) per response, while larger models (405 billion parameters) require up to 6,700 joules (1.861 Wh) per response. This corresponds to the energy needed to run a microwave oven for roughly one-tenth of a second and eight seconds, respectively. Comparisons between AI systems and human labour for specific tasks have produced mixed results and remain sensitive to assumptions about output quality, workload and system boundaries. A 2024 study in Scientific Reports reported 130 to 2900 times lower estimated carbon emissions for selected AI systems than for human writers and illustrators under its assumptions. A later Scientific Reports paper reported a counterexample for programming tasks under its assumptions, finding 5 to 19 times higher estimated emissions for the evaluated AI system than for human programmers on the benchmark used in that study. === System level === ==== Energy use and efficiency ==== AI electricity intensity depends not only on model architecture but also on hardware and facility efficiency. Data-centre operators commonly report Power usage effectiveness (PUE), which measures the ratio of total facility energy to IT equipment energy; a lower PUE indicates less overhead energy for cooling and other supporting infrastructure. Operators may also publish metrics and case studies on hardware efficiency, cooling systems and power sourcing. In its 2024 environmental report, Google stated that its 2023 total greenhouse gas emissions increased 13% year over year, primarily because of increased data-centre energy consumption and supply-chain emissions, while also reporting lower PUE than industry averages for its own facilities. The International Energy Agency has also reported that data centres remain a relatively small share of global electricity use overall, but that their local effects can be much more pronounced because demand is geographically concentrated. ==== Carbon footprint ==== At system level, AI contributes to rising electricity demand in data centres and related infrastructure. The International Energy Agency estimated that data centres used about 415 TWh of electricity in 2024, or around 1.5% of global electricity consumption, and projected that data-centre electricity use could rise to about 945 TWh by 2030, with AI identified as the main driver of that growth alongside other digital services. The carbon footprint of AI systems depends strongly on electricity sources, hardware efficiency, utilisation rates, and what stages are included in the accounting. Training large models can require substantial electricity, while total lifecycle impacts also depend on deployment scale and the amount of inference performed after training. Early analyses of frontier-model development reported rapid historical growth in training compute for selected systems, although later trends have depended on changes in model design, hardware and efficiency gains. Accounting methods that include upstream or embodied impacts, such as hardware manufacture and facilities construction, can materially affect estimates of AI-related emissions. === Decisions and strategies by individual companies === Large technology companies have reported that the expansion of AI and cloud infrastructure affects their sustainability targets, electricity demand, and resource use. Google, for example, attributed part of its emissions growth in 2023 to increased data-centre energy consumption and supply-chain emissions in its 2024 environmental report. Cloud and AI companies have also announced measures intended to reduce environmental impacts, including investment in more efficient hardware, low-carbon electricity procurement, alternative cooling systems, and water stewardship programmes. The extent, comparability, and third-party verification of such disclosures vary between firms and jurisdictions. == Water usage == Data centres can use water directly for cooling and indirectly through the water used in electricity generation, depending on the local energy mix. Public reporting on data-centre water use has often been inconsistent, making comparisons between operators and regions difficult. To standardise operational reporting, The Green Grid proposed the metric water usage effectiveness (WUE), defined as annual site water use divided by IT equipment energy use. WUE does not by itself measure local water stress, source sustainability, or all upstream water impacts. Studies of AI water use also distinguish between water withdrawal and water consumption. Research on AI-specific water use has argued that the water footprint of AI systems can be difficult to observe and may vary substantially by location, cooling design, and electricity source. A 2025 Communications of the ACM article summarised methods for estimating AI water footprints and emphasised the distinction between water withdrawal and water consumption. Li and colleagues estimated that global AI water withdrawal could reach 4.2–6.6 billion cubic metres in 2027 under the scenarios examined in their article. Using GPT-3, released by OpenAI in 2020, as an example, they estimated that training the model in Microsoft's U.S. data centres could consume about 700,000 litres of onsite water and about 5.4 million litres in total when offsite electricity-related water use was included; they also estimated that 10–50 medium-length GPT-3 responses could consume about 500 mL of water, depending on when and where the model was deployed. Published prompt-level estimates have also varied by system and accounting framework: the 2025 Google study on Gemini assistant serving reported a median text-prompt estimate of about 0.26 mL under its framework. Location can materially affect the significance of data-centre water use. Research on U.S. data centres found that one-fifth of servers' direct water footprint came from moderately to highly water-stressed watersheds, while nearly half of servers were fully or partially powered by plants located in water-stressed regions. A 2025 Reuters report, citing data from Verisk Maplecroft and NatureFinance, said that an average mid-sized data centre uses about 1.4 million litres of water per day for cooling and that Phoenix would experience a 32% increase in annual water stress if currently pl

  Read more →
• 

  Syman

  SYMAN is an artificial intelligence technology that uses data from social media profiles to identify trends in the job market. SYMAN is designed to organize actionable data for products and services including recruiting, human capital management, CRM, and marketing. SYMAN was developed with a $21 million series B financing round secured by Identified, which was led by VantagePoint Capital Partners and Capricorn Investment Group.

  Read more →
• 

  Microsoft Teams

  Microsoft Teams is a team collaboration platform developed by Microsoft as part of the Microsoft 365 suite. It offers features such as workspace chat, video conferencing, file storage, and integration with both Microsoft and third-party applications and services. Teams gradually replaced earlier Microsoft messaging and collaboration platforms, including Skype for Business, Skype, Flip, and Microsoft Classroom. The platform saw significant growth during the COVID-19 pandemic, alongside competitors such as Zoom, Slack, and Google Meet, as organizations shifted to remote work and virtual meetings. As of January 2023, Microsoft reported approximately 280 million monthly active users. == History == On August 29, 2007, Microsoft acquired Parlano, the developer of the persistent group chat tool MindAlign. Years later, on March 4, 2016, Microsoft considered acquiring Slack for $8 billion. However, the proposal was reportedly opposed by Bill Gates, who advocated for focusing on enhancing Skype for Business instead. Lu Qi, then executive vice president of Applications and Services, had led the initiative to pursue the Slack acquisition. Following Lu's departure later that year, Microsoft announced Microsoft Teams on November 2, 2016, at an event in New York City, positioning it as a direct competitor to Slack. Teams launched worldwide on March 14, 2017. The service was initially led by corporate vice president Brian MacDonald. In response to the launch, Slack published a full-page advertisement in The New York Times welcoming the competition and outlining its product philosophy. Although Slack was used by 28 companies in the Fortune 100, The Verge wrote that executives would question paying for the service if Teams provides a similar function in their company's existing Office 365 subscription. However, ZDNET noted that the platforms initially served different markets, as Teams did not support external users, making it less appealing to small businesses and freelancers, a limitation Microsoft later addressed. In response to Teams' announcement, Slack deepened in-product integration with Google services. In May 2017, Microsoft announced that Teams would replace Microsoft Classroom in Office 365 Education. A free version of Teams was released on July 12, 2018, offering most core features at no cost, albeit with limits on users and storage. In January 2019, Microsoft introduced updates targeting "Firstline Workers" to improve Teams’ performance across shared or limited-access devices. In September 2019, Microsoft announced the retirement of Skype for Business in favor of Teams, which took effect on July 31, 2021. In early 2020, Microsoft introduced a push-to-talk "Walkie Talkie" feature aimed at firstline workers using smartphones and tablets over Wi-Fi or cellular networks. The COVID-19 pandemic significantly boosted usage of Teams. On March 19, 2020, Microsoft reported 44 million daily active users. In April, the platform logged 4.1 billion meeting minutes in a single day. A public preview of Microsoft Teams for Linux was released in December 2019, but the Linux client was discontinued in 2022. In July 2020, Microsoft shut down its video game livestreaming platform Mixer, and announced that some of its technologies would be repurposed for use in Teams. On February 28, 2025, Microsoft announced that Skype would be fully retired on May 5, 2025, with users given options to export their data or transition to Microsoft Teams. In October 2025, together with other Microsoft 365 suite apps, Teams had its logo updated. == Usage == == Underlying software == Microsoft Teams, as part of the Microsoft 365 suite, utilizes SharePoint and Exchange Online. Each Team, Shared Channel, and Private Channel has its own Microsoft 365 Group and SharePoint Site used for file storage. Messages are stored in Cosmos DB and are journaled to Exchange Online mailboxes. Private messages, including messages in Private Channels, are journaled to the sender and recipients' mailboxes. Public Channel messages are journaled to their corresponding Team's group mailbox, whereas, messages from Shared Channels are journaled to their own mailboxes. Contacts and voicemail are stored in Exchange Online. Microsoft Teams client is a web-based desktop app, originally developed on top of the Electron framework which combines the Chromium rendering engine and the Node.js JavaScript platform. Version 2.0 client was rebuilt using the Evergreen version of Microsoft Edge WebView2 in place of Electron. == Features == === Chats === Teams allows users to communicate in two-way persistent chats with one or multiple participants. Participants can message using text, emojis, stickers and gifs, as well as sharing links and files. In August 2022, the chat feature was updated for "chat with yourself"; allowing for the organization of files, notes, comments, images, and videos within a private chat tab. === Teams === Teams allows communities, groups, or teams to contribute in a shared workspace where messages and digital content on a specific topic are shared. Team members can join through an invitation sent by a team administrator or owner or sharing of a specific URL. Teams for Education allows admins and teachers to set up groups for classes, professional learning communities (PLCs), staff members, and everyone. === Channels === Channels allow team members to communicate without the use of email or group SMS (texting). Users can reply to posts with text, images, GIFs, and image macros. Direct messages send private messages to designated users rather than the entire channel. Connectors can be used within a channel to submit information contacted through a third-party service. Connectors include Mailchimp, Facebook Pages, Twitter, Power BI and Bing News. === Group conversations === Ad-hoc groups can be created to share instant messaging, audio calls (VoIP), and video calls inside the client software. === Telephone replacement === A feature on one of the higher cost licencing tiers allows connectivity to the public switched telephone network (PSTN) telephone system. This allows users to use Teams as if it were a telephone, making and receiving calls over the PSTN, including the ability to host "conference calls" with multiple participants. === Meeting === Meetings can be scheduled with multiple participants able to share audio, video, chat and presented content with all participants. Multiple users can connect via a meeting link. Automated minutes are possible using the recording and transcript features. Teams has a plugin for Microsoft Outlook to schedule a Teams Meeting in Outlook for a specific date and time and invite others to attend. If a meeting is scheduled within a channel, users visiting the channel are able to see if a meeting is in progress. ==== Teams Live Events ==== Teams Live Events replaces Skype Meeting Broadcast for users to broadcast to 10,000 participants on Teams, Yammer, or Microsoft Stream. ==== Breakout Rooms ==== Breakout rooms split a meeting into small groups. This is often utilized for collaboration during trainings or any environment where having all participants speak at once could be disruptive or unfeasible. Breakout rooms can be set by the hosts to a certain length of time, after which all participants will automatically rejoin the main meeting room. ==== Front Row ==== Front Row adjusts the layout of the viewer's screen, placing the speaker or content in the center of the gallery with other meeting participant's video feeds reduced in size and located below the speaker. === Education === Microsoft Teams for Education allows teachers to distribute, provide feedback, and grade student assignments turned in via Teams using the Assignments tab through Office 365 for Education subscribers. Quizzes can also be assigned to students through an integration with Office Forms. === Protocols === Microsoft Teams is based on a number of Microsoft-specific protocols. Video conferences are realized over the protocol MNP24, known from the Skype consumer version. VoIP and video conference clients based on SIP and H.323 need special gateways to connect to Microsoft Teams servers. With the help of Interactive Connectivity Establishment (ICE), clients behind Network address translation routers and restrictive firewalls are also able to connect, if peer-to-peer is not possible. === Integrations === Microsoft Teams has integrations through Microsoft AppSource, its integration marketplace. In 2020, Microsoft partnered with KUDO, a cloud-based solution with language interpretation, to allow integrated language meeting controls. In June 2022, an update was released using AI to improve call audio through the elimination of background feedback loops and cancelling non-vocal audio. == Anti-trust controversy == In July 2023, the European Commission opened an anti-trust investigation into the possibility that Microsoft unfairly used its office suite market power to increase sales of Teams and hurt

  Read more →
• 

  Hello World: How to be Human in the Age of the Machine

  Hello World: How to Be Human in the Age of the Machine (also titled Hello World: Being Human in the Age of Algorithms) is a book on the growing influence of algorithms and artificial intelligence (AI) on human life, authored by mathematician and science communicator Hannah Fry. The book examines how algorithms are increasingly shaping decisions in critical areas such as healthcare, transportation, justice, finance, and the arts. == Overview == Fry uses real-world examples, such as driverless cars and predictive policing, to illustrate her points. She emphasizes that algorithms are not inherently objective; they reflect biases embedded in their design and data inputs. While acknowledging their potential to improve efficiency and accuracy, Fry cautions against over-reliance on machines without human judgment. Fry explores moral questions surrounding algorithmic decision-making, such as whether machines can replace human empathy in critical situations. She advocates for greater scrutiny of algorithms to ensure fairness and avoid harmful biases. The book proposes a "cyborg future", where humans work alongside algorithms to enhance decision-making while retaining ultimate control. == Reception == Hello World has been praised for its clarity, engaging storytelling, and balanced perspective. Critics have highlighted Fry's ability to make complex topics accessible to general audiences while raising important questions about technology's impact on society. The book was shortlisted for awards such as the 2018 Baillie Gifford Prize and the Royal Society Science Book Prize.

  Read more →
• 

  EM algorithm and GMM model

  In statistics, EM (expectation maximization) algorithm handles latent variables, while GMM is the Gaussian mixture model. == Background == In the picture below, are shown the red blood cell hemoglobin concentration and the red blood cell volume data of two groups of people, the Anemia group and the control group (i.e. the group of people without Anemia). As expected, people with Anemia have lower red blood cell volume and lower red blood cell hemoglobin concentration than those without Anemia. x {\displaystyle x} is a random vector such as x := ( red blood cell volume , red blood cell hemoglobin concentration ) {\displaystyle x:={\big (}{\text{red blood cell volume}},{\text{red blood cell hemoglobin concentration}}{\big )}} , and from medical studies it is known that x {\displaystyle x} are normally distributed in each group, i.e. x ∼ N ( μ , Σ ) {\displaystyle x\sim {\mathcal {N}}(\mu ,\Sigma )} . z {\displaystyle z} is denoted as the group where x {\displaystyle x} belongs, with z i = 0 {\displaystyle z_{i}=0} when x i {\displaystyle x_{i}} belongs to the Anemia group and z i = 1 {\displaystyle z_{i}=1} when x i {\displaystyle x_{i}} belongs to the control group. Also z ∼ Categorical ⁡ ( k , ϕ ) {\displaystyle z\sim \operatorname {Categorical} (k,\phi )} where k = 2 {\displaystyle k=2} , ϕ j ≥ 0 , {\displaystyle \phi _{j}\geq 0,} and ∑ j = 1 k ϕ j = 1 {\displaystyle \sum _{j=1}^{k}\phi _{j}=1} . See Categorical distribution. The following procedure can be used to estimate ϕ , μ , Σ {\displaystyle \phi ,\mu ,\Sigma } . A maximum likelihood estimation can be applied: ℓ ( ϕ , μ , Σ ) = ∑ i = 1 m log ⁡ ( p ( x ( i ) ; ϕ , μ , Σ ) ) = ∑ i = 1 m log ⁡ ∑ z ( i ) = 1 k p ( x ( i ) ∣ z ( i ) ; μ , Σ ) p ( z ( i ) ; ϕ ) {\displaystyle \ell (\phi ,\mu ,\Sigma )=\sum _{i=1}^{m}\log(p(x^{(i)};\phi ,\mu ,\Sigma ))=\sum _{i=1}^{m}\log \sum _{z^{(i)}=1}^{k}p\left(x^{(i)}\mid z^{(i)};\mu ,\Sigma \right)p(z^{(i)};\phi )} As the z i {\displaystyle z_{i}} for each x i {\displaystyle x_{i}} are known, the log likelihood function can be simplified as below: ℓ ( ϕ , μ , Σ ) = ∑ i = 1 m log ⁡ p ( x ( i ) ∣ z ( i ) ; μ , Σ ) + log ⁡ p ( z ( i ) ; ϕ ) {\displaystyle \ell (\phi ,\mu ,\Sigma )=\sum _{i=1}^{m}\log p\left(x^{(i)}\mid z^{(i)};\mu ,\Sigma \right)+\log p\left(z^{(i)};\phi \right)} Now the likelihood function can be maximized by making partial derivative over μ , Σ , ϕ {\displaystyle \mu ,\Sigma ,\phi } , obtaining: ϕ j = 1 m ∑ i = 1 m 1 { z ( i ) = j } {\displaystyle \phi _{j}={\frac {1}{m}}\sum _{i=1}^{m}1\{z^{(i)}=j\}} μ j = ∑ i = 1 m 1 { z ( i ) = j } x ( i ) ∑ i = 1 m 1 { z ( i ) = j } {\displaystyle \mu _{j}={\frac {\sum _{i=1}^{m}1\{z^{(i)}=j\}x^{(i)}}{\sum _{i=1}^{m}1\left\{z^{(i)}=j\right\}}}} Σ j = ∑ i = 1 m 1 { z ( i ) = j } ( x ( i ) − μ j ) ( x ( i ) − μ j ) T ∑ i = 1 m 1 { z ( i ) = j } {\displaystyle \Sigma _{j}={\frac {\sum _{i=1}^{m}1\{z^{(i)}=j\}(x^{(i)}-\mu _{j})(x^{(i)}-\mu _{j})^{T}}{\sum _{i=1}^{m}1\{z^{(i)}=j\}}}} If z i {\displaystyle z_{i}} is known, the estimation of the parameters results to be quite simple with maximum likelihood estimation. But if z i {\displaystyle z_{i}} is unknown it is much more complicated. Being z {\displaystyle z} a latent variable (i.e. not observed), with unlabeled scenario, the expectation maximization algorithm is needed to estimate z {\displaystyle z} as well as other parameters. Generally, this problem is set as a GMM since the data in each group is normally distributed. In machine learning, the latent variable z {\displaystyle z} is considered as a latent pattern lying under the data, which the observer is not able to see very directly. x i {\displaystyle x_{i}} is the known data, while ϕ , μ , Σ {\displaystyle \phi ,\mu ,\Sigma } are the parameter of the model. With the EM algorithm, some underlying pattern z {\displaystyle z} in the data x i {\displaystyle x_{i}} can be found, along with the estimation of the parameters. The wide application of this circumstance in machine learning is what makes EM algorithm so important. == EM algorithm in GMM == The EM algorithm consists of two steps: the E-step and the M-step. Firstly, the model parameters and the z ( i ) {\displaystyle z^{(i)}} can be randomly initialized. In the E-step, the algorithm tries to guess the value of z ( i ) {\displaystyle z^{(i)}} based on the parameters, while in the M-step, the algorithm updates the value of the model parameters based on the guess of z ( i ) {\displaystyle z^{(i)}} of the E-step. These two steps are repeated until convergence is reached. The algorithm in GMM is: Repeat until convergence: 1. (E-step) For each i , j {\displaystyle i,j} , set w j ( i ) := p ( z ( i ) = j | x ( i ) ; ϕ , μ , Σ ) {\displaystyle w_{j}^{(i)}:=p\left(z^{(i)}=j|x^{(i)};\phi ,\mu ,\Sigma \right)} 2. (M-step) Update the parameters ϕ j := 1 m ∑ i = 1 m w j ( i ) {\displaystyle \phi _{j}:={\frac {1}{m}}\sum _{i=1}^{m}w_{j}^{(i)}} μ j := ∑ i = 1 m w j ( i ) x ( i ) ∑ i = 1 m w j ( i ) {\displaystyle \mu _{j}:={\frac {\sum _{i=1}^{m}w_{j}^{(i)}x^{(i)}}{\sum _{i=1}^{m}w_{j}^{(i)}}}} Σ j := ∑ i = 1 m w j ( i ) ( x ( i ) − μ j ) ( x ( i ) − μ j ) T ∑ i = 1 m w j ( i ) {\displaystyle \Sigma _{j}:={\frac {\sum _{i=1}^{m}w_{j}^{(i)}\left(x^{(i)}-\mu _{j}\right)\left(x^{(i)}-\mu _{j}\right)^{T}}{\sum _{i=1}^{m}w_{j}^{(i)}}}} With Bayes' rule, the following result is obtained by the E-step: p ( z ( i ) = j | x ( i ) ; ϕ , μ , Σ ) = p ( x ( i ) | z ( i ) = j ; μ , Σ ) p ( z ( i ) = j ; ϕ ) ∑ l = 1 k p ( x ( i ) | z ( i ) = l ; μ , Σ ) p ( z ( i ) = l ; ϕ ) {\displaystyle p\left(z^{(i)}=j|x^{(i)};\phi ,\mu ,\Sigma \right)={\frac {p\left(x^{(i)}|z^{(i)}=j;\mu ,\Sigma \right)p\left(z^{(i)}=j;\phi \right)}{\sum _{l=1}^{k}p\left(x^{(i)}|z^{(i)}=l;\mu ,\Sigma \right)p\left(z^{(i)}=l;\phi \right)}}} According to GMM setting, these following formulas are obtained: p ( x ( i ) | z ( i ) = j ; μ , Σ ) = 1 ( 2 π ) n / 2 | Σ j | 1 / 2 exp ⁡ ( − 1 2 ( x ( i ) − μ j ) T Σ j − 1 ( x ( i ) − μ j ) ) {\displaystyle p\left(x^{(i)}|z^{(i)}=j;\mu ,\Sigma \right)={\frac {1}{(2\pi )^{n/2}\left|\Sigma _{j}\right|^{1/2}}}\exp \left(-{\frac {1}{2}}\left(x^{(i)}-\mu _{j}\right)^{T}\Sigma _{j}^{-1}\left(x^{(i)}-\mu _{j}\right)\right)} p ( z ( i ) = j ; ϕ ) = ϕ j {\displaystyle p\left(z^{(i)}=j;\phi \right)=\phi _{j}} In this way, a switch between the E-step and the M-step is possible, according to the randomly initialized parameters.

  Read more →
• 

  Double descent

  Double descent in statistics and machine learning is the phenomenon where a model's error rate on the test set initially decreases with the number of parameters, then peaks, then decreases again. This phenomenon has been considered surprising, as it contradicts assumptions about overfitting in classical machine learning. The increase usually occurs near the interpolation threshold, where the number of parameters is the same as the number of training data points (the model is just large enough to fit the training data). Or, more precisely, it is the maximum number of samples on which the model/training procedure achieves approximately on average 0 training error. == History == Early observations of what would later be called double descent in specific models date back to 1989. The term "double descent" was coined by Belkin et. al. in 2019, when the phenomenon gained popularity as a broader concept exhibited by many models. The latter development was prompted by a perceived contradiction between the conventional wisdom that too many parameters in the model result in a significant overfitting error (an extrapolation of the bias–variance tradeoff), and the empirical observations in the 2010s that some modern machine learning techniques tend to perform better with larger models. == Theoretical models == Double descent occurs in linear regression with isotropic Gaussian covariates and isotropic Gaussian noise. A model of double descent at the thermodynamic limit has been analyzed using the replica trick, and the result has been confirmed numerically. A number of works have suggested that double descent can be explained using the concept of effective dimension: While a network may have a large number of parameters, in practice only a subset of those parameters are relevant for generalization performance, as measured by the local Hessian curvature. This explanation is formalized through PAC-Bayes compression-based generalization bounds, which show that less complex models are expected to generalize better under a Solomonoff prior.

  Read more →
• 

  Image

  An image or picture is a visual representation. An image can be two-dimensional, such as a drawing, painting, or photograph, or three-dimensional, such as a carving or sculpture. Images may be displayed through other media, including a projection on a surface, activation of electronic signals, or digital displays; they can also be reproduced through mechanical means, such as photography, printmaking, or photocopying. Images can also be animated through digital or physical processes. In the context of signal processing, an image is a distributed amplitude of color(s). In optics, the term image (or optical image) refers specifically to the reproduction of an object formed by light waves coming from the object. A volatile image exists or is perceived only for a short period. This may be a reflection of an object by a mirror, a projection of a camera obscura, or a scene displayed on a cathode-ray tube. A fixed image, also called a hard copy, is one that has been recorded on a material object, such as paper or textile. A mental image exists in an individual's mind as something one remembers or imagines. The subject of an image does not need to be real; it may be an abstract concept such as a graph or function or an imaginary entity. For a mental image to be understood outside of an individual's mind, however, there must be a way of conveying that mental image through the words or visual productions of the subject. == Characteristics == === Two-dimensional images === The broader sense of the word 'image' also encompasses any two-dimensional figure, such as a map, graph, pie chart, painting, or banner. In this wider sense, images can also be rendered manually, such as by drawing, the art of painting, or the graphic arts (such as lithography or etching). Additionally, images can be rendered automatically through printing, computer graphics technology, or a combination of both methods. A two-dimensional image does not need to use the entire visual system to be a visual representation. An example of this is a grayscale ("black and white") image, which uses the visual system's sensitivity to brightness across all wavelengths without taking into account different colors. A black-and-white visual representation of something is still an image, even though it does not fully use the visual system's capabilities. On the other hand, some processes can be used to create visual representations of objects that are otherwise inaccessible to the human visual system. These include microscopy for the magnification of minute objects, telescopes that can observe objects at great distances, X-rays that can visually represent the interior structures of the human body (among other objects), magnetic resonance imaging (MRI), positron emission tomography (PET scans), and others. Such processes often rely on detecting electromagnetic radiation that occurs beyond the light spectrum visible to the human eye and converting such signals into recognizable images. === Three-dimensional images === Aside from sculpture and other physical activities that can create three-dimensional images from solid material, some modern techniques, such as holography, can create three-dimensional images that are reproducible but intangible to human touch. Some photographic processes can now render the illusion of depth in an otherwise "flat" image, but "3-D photography" (stereoscopy) or "3-D film" are optical illusions that require special devices such as eyeglasses to create the illusion of depth. === Moving images === "Moving" two-dimensional images are actually illusions of movement perceived when still images are displayed in sequence, each image lasting less, and sometimes much less, than a fraction of a second. The traditional standard for the display of individual frames by a motion picture projector has been 24 frames per second (FPS) since at least the commercial introduction of "talking pictures" in the late 1920s, which necessitated a standard for synchronizing images and sounds. Even in electronic formats such as television and digital image displays, the apparent "motion" is actually the result of many individual lines giving the impression of continuous movement. This phenomenon has often been described as "persistence of vision": a physiological effect of light impressions remaining on the retina of the eye for very brief periods. Even though the term is still sometimes used in popular discussions of movies, it is not a scientifically valid explanation. Other terms emphasize the complex cognitive operations of the brain and the human visual system. "Flicker fusion", the "phi phenomenon", and "beta movement" are among the terms that have replaced "persistence of vision", though no one term seems adequate to describe the process. == Cultural and other uses == Image-making seems to have been common to virtually all human cultures since at least the Paleolithic era. Prehistoric examples of rock art—including cave paintings, petroglyphs, rock reliefs, and geoglyphs—have been found on every inhabited continent. Many of these images seem to have served various purposes: as a form of record-keeping; as an element of spiritual, religious, or magical practice; or even as a form of communication. Early writing systems, including hieroglyphics, ideographic writing, and even the Roman alphabet, owe their origins in some respects to pictorial representations. === Meaning and signification === Images of any type may convey different meanings and sensations for individual viewers, regardless of whether the image's creator intended them. An image may be taken simply as a more or less "accurate" copy of a person, place, thing, or event. It may represent an abstract concept, such as the political power of a ruler or ruling class, a practical or moral lesson, an object for spiritual or religious veneration, or an object—human or otherwise—to be desired. It may also be regarded for its purely aesthetic qualities, rarity, or monetary value. Such reactions can depend on the viewer's context. A religious image in a church may be regarded differently than the same image mounted in a museum. Some might view it simply as an object to be bought or sold. Viewers' reactions will also be guided or shaped by their education, class, race, and other contexts. The study of emotional sensations and their relationship to any given image falls into the categories of aesthetics and the philosophy of art. While such studies inevitably deal with issues of meaning, another approach to signification was suggested by the American philosopher, logician, and semiotician Charles Sanders Peirce. "Images" are one type of the broad category of "signs" proposed by Peirce. Although his ideas are complex and have changed over time, the three categories of signs that he distinguished stand out: The "icon," which relates to an object by resemblance to some quality of the object. A painted or photographed portrait is an icon by virtue of its resemblance to the painting's or photograph's subject. A more abstract representation, such as a map or diagram, can also be an icon. The "index," which relates to an object by some real connection. For example, smoke may be an index of fire, or the temperature recorded on a thermometer may be an index of a patient's illness or health. The "symbol," which lacks direct resemblance or connection to an object but whose association is arbitrarily assigned by the creator or dictated by cultural and historical habit, convention, etc. The color red, for example, may connote rage, beauty, prosperity, political affiliation, or other meanings within a given culture or context; the Swedish film director Ingmar Bergman claimed that his use of the color in his 1972 film Cries and Whispers came from his personal visualization of the human soul. A single image may exist in all three categories at the same time. The Statue of Liberty provides an example. While there have been countless two-dimensional and three-dimensional "reproductions" of the statue (i.e., "icons" themselves), the statue itself exists as an "icon" by virtue of its resemblance to a human woman (or, more specifically, previous representations of the Roman goddess Libertas or the female model used by the artist Frederic-Auguste Bartholdi). an "index" representing New York City or the United States of America in general due to its placement in New York Harbor, or with "immigration" from its proximity to the immigration center at Ellis Island. a "symbol" as a visualization of the abstract concept of "liberty" or "freedom" or even "opportunity" or "diversity". === Critiques of imagery === The nature of images, whether three-dimensional or two-dimensional, created for a specific purpose or only for aesthetic pleasure, has continued to provoke questions and even condemnation at different times and places. In his dialogue, The Republic, the Greek philosopher Plato described our apparent reality as a copy of a higher order of universal forms.

  Read more →
• 

  Evaluation of binary classifiers

  Evaluation of a binary classifier typically assigns a numerical value, or values, to a classifier that represent its accuracy. An example is error rate, which measures how frequently the classifier makes a mistake. There are many metrics that can be used; different fields have different preferences. For example, in medicine sensitivity and specificity are often used, while in computer science precision and recall are preferred. An important distinction is between metrics that are independent of the prevalence or skew (how often each class occurs in the population), and metrics that depend on the prevalence – both types are useful, but they have very different properties. Often, evaluation is used to compare two methods of classification, so that one can be adopted and the other discarded. Such comparisons are more directly achieved by a form of evaluation that results in a single unitary metric rather than a pair of metrics. == Contingency table == Given a data set, a classification (the output of a classifier on that set) gives two numbers: the number of positives and the number of negatives, which add up to the total size of the set. To evaluate a classifier, one compares its output to another reference classification – ideally a perfect classification, but in practice the output of another gold standard test – and cross tabulates the data into a 2×2 contingency table, comparing the two classifications. One then evaluates the classifier relative to the gold standard by computing summary statistics of these 4 numbers. Generally these statistics will be scale invariant (scaling all the numbers by the same factor does not change the output), to make them independent of population size, which is achieved by using ratios of homogeneous functions, most simply homogeneous linear or homogeneous quadratic functions. Say we test some people for the presence of a disease. Some of these people have the disease, and our test correctly says they are positive. They are called true positives (TP). Some have the disease, but the test incorrectly claims they don't. They are called false negatives (FN). Some don't have the disease, and the test says they don't – true negatives (TN). Finally, there might be healthy people who have a positive test result – false positives (FP). These can be arranged into a 2×2 contingency table (confusion matrix), conventionally with the test result on the vertical axis and the actual condition on the horizontal axis. These numbers can then be totaled, yielding both a grand total and marginal totals. Totaling the entire table, the number of true positives, false negatives, true negatives, and false positives add up to 100% of the set. Totaling the columns (adding vertically) the number of true positives and false positives add up to 100% of the test positives, and likewise for negatives. Totaling the rows (adding horizontally), the number of true positives and false negatives add up to 100% of the condition positives (conversely for negatives). The basic marginal ratio statistics are obtained by dividing the 2×2=4 values in the table by the marginal totals (either rows or columns), yielding 2 auxiliary 2×2 tables, for a total of 8 ratios. These ratios come in 4 complementary pairs, each pair summing to 1, and so each of these derived 2×2 tables can be summarized as a pair of 2 numbers, together with their complements. Further statistics can be obtained by taking ratios of these ratios, ratios of ratios, or more complicated functions. The contingency table and the most common derived ratios are summarized below; see sequel for details. Note that the rows correspond to the condition actually being positive or negative (or classified as such by the gold standard), as indicated by the color-coding, and the associated statistics are prevalence-independent, while the columns correspond to the test being positive or negative, and the associated statistics are prevalence-dependent. There are analogous likelihood ratios for prediction values, but these are less commonly used, and not depicted above. == Pairs of metrics == Often accuracy is evaluated with a pair of metrics composed in a standard pattern. === Sensitivity and specificity === The fundamental prevalence-independent statistics are sensitivity and specificity. Sensitivity or True Positive Rate (TPR), also known as recall, is the proportion of people that tested positive and are positive (True Positive, TP) of all the people that actually are positive (Condition Positive, CP = TP + FN). It can be seen as the probability that the test is positive given that the patient is sick. With higher sensitivity, fewer actual cases of disease go undetected (or, in the case of the factory quality control, fewer faulty products go to the market). Specificity (SPC) or True Negative Rate (TNR) is the proportion of people that tested negative and are negative (True Negative, TN) of all the people that actually are negative (Condition Negative, CN = TN + FP). As with sensitivity, it can be looked at as the probability that the test result is negative given that the patient is not sick. With higher specificity, fewer healthy people are labeled as sick (or, in the factory case, fewer good products are discarded). The relationship between sensitivity and specificity, as well as the performance of the classifier, can be visualized and studied using the Receiver Operating Characteristic (ROC) curve. In theory, sensitivity and specificity are independent in the sense that it is possible to achieve 100% in both (such as in the red/blue ball example given above). In more practical, less contrived instances, however, there is usually a trade-off, such that they are inversely proportional to one another to some extent. This is because we rarely measure the actual thing we would like to classify; rather, we generally measure an indicator of the thing we would like to classify, referred to as a surrogate marker. The reason why 100% is achievable in the ball example is because redness and blueness is determined by directly detecting redness and blueness. However, indicators are sometimes compromised, such as when non-indicators mimic indicators or when indicators are time-dependent, only becoming evident after a certain lag time. The following example of a pregnancy test will make use of such an indicator. Modern pregnancy tests do not use the pregnancy itself to determine pregnancy status; rather, human chorionic gonadotropin is used, or hCG, present in the urine of gravid females, as a surrogate marker to indicate that a woman is pregnant. Because hCG can also be produced by a tumor, the specificity of modern pregnancy tests cannot be 100% (because false positives are possible). Also, because hCG is present in the urine in such small concentrations after fertilization and early embryogenesis, the sensitivity of modern pregnancy tests cannot be 100% (because false negatives are possible). === Positive and negative predictive values === In addition to sensitivity and specificity, the performance of a binary classification test can be measured with positive predictive value (PPV), also known as precision, and negative predictive value (NPV). The positive prediction value answers the question "If the test result is positive, how well does that predict an actual presence of disease?". It is calculated as TP/(TP + FP); that is, it is the proportion of true positives out of all positive results. The negative prediction value is the same, but for negatives, naturally. ==== Impact of prevalence on predictive values ==== Prevalence has a significant impact on prediction values. As an example, suppose there is a test for a disease with 99% sensitivity and 99% specificity. If 2000 people are tested and the prevalence (in the sample) is 50%, 1000 of them are sick and 1000 of them are healthy. Thus about 990 true positives and 990 true negatives are likely, with 10 false positives and 10 false negatives. The positive and negative prediction values would be 99%, so there can be high confidence in the result. However, if the prevalence is only 5%, so of the 2000 people only 100 are really sick, then the prediction values change significantly. The likely result is 99 true positives, 1 false negative, 1881 true negatives and 19 false positives. Of the 19+99 people tested positive, only 99 really have the disease – that means, intuitively, that given that a patient's test result is positive, there is only 84% chance that they really have the disease. On the other hand, given that the patient's test result is negative, there is only 1 chance in 1882, or 0.05% probability, that the patient has the disease despite the test result. === Precision and recall === Precision and recall can be interpreted as (estimated) conditional probabilities: Precision is given by P ( C = P | C ^ = P ) {\displaystyle P(C=P|{\hat {C}}=P)} while recall is given by P ( C ^ = P | C = P ) {\displaystyle P({\hat {C}}=P|C=P)} , where C ^ {\

  Read more →
• 

  Dataset shift

  Dataset shift is a phenomenon in machine learning and statistics in which the joint distribution of input variables and target labels is different in the training phase and the deployment or test phase (i.e., P t r a i n ( X , Y ) ≠ P t e s t ( X , Y ) {\displaystyle P_{train}(X,Y)\neq P_{test}(X,Y)} ). This happens when the statistical properties of data used to train a model are no longer representative of the data encountered in real-world use, often resulting in degraded predictive performance and diminished generalization ability. Dataset shift is a generic term for a number of particular types of distributional change. Covariate shift is when the distribution of the input features changes, but the conditional relationship between inputs and outputs remains constant . Prior probability shift (or label shift) happens when the distribution of target labels changes, but the conditional distribution of inputs given labels stays the same. Concept shift (also known as concept drift) is the change of the conditional relationship between inputs and outputs that renders previously learned patterns invalid over time. A key challenge for deploying machine learning systems is dataset shift, in particular in dynamic environments where the data distributions change over time. Detecting and mitigating such shifts is an active area of research, e.g., drift detection, domain adaptation, continual learning.

  Read more →