AI Generator Letter — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.
Cloud-to-Cloud Integration ( C2I ) allows users to connect disparate cloud computing platforms. While Paas (Platform as a service) and Saas (Software as a service) continue to gain momentum, different vendors have different implementations for cloud computing, e.g. Database, REST, SOAP API. Another name for Cloud-to-Cloud Integration is Cloud-Surfing. See also Cloud-based integration
Read more →
Artificial Intelligence of Things (AIoT) is the combination of artificial intelligence (AI) technologies with the Internet of things (IoT) infrastructure to create systems capable of sensing, learning, and acting on data without continuous human intervention. While IoT focuses on connectivity and sensor data collection, AI enables IoT devices to analyse data in real time and produce actionable outputs, including automated decisions at the edge. == Applications == === Manufacturing and predictive maintenance === Manufacturing accounts for the largest share of AIoT adoption by industry vertical. A common application is predictive maintenance, where sensors measuring vibration, temperature, current draw, and acoustic emissions feed machine learning models trained to detect signatures that precede equipment failure. These systems can flag developing faults weeks or months in advance, and in more advanced deployments can autonomously adjust machine parameters such as motor speed or cooling cycles to delay or prevent failure. === Other industries === In healthcare, AIoT enables remote patient monitoring through wearable devices that collect vital signs and apply AI models to detect anomalies or predict deterioration. In logistics, GPS and telematics sensors combined with AI models support real-time route optimisation, vehicle maintenance prediction, and fuel cost forecasting. Smart building systems use occupancy, temperature, and energy sensors with AI to dynamically adjust HVAC and lighting, reducing energy consumption. == Architecture == AIoT systems typically operate across three layers: a device layer of sensors and actuators that collect data, a connectivity layer that transmits data via protocols such as MQTT or HTTP, and a compute layer where AI models process the data either in the cloud or at the edge. The trend toward edge-based processing, where inference runs on low-cost processors near the data source rather than in a centralised cloud, has accelerated as hardware costs have fallen and applications increasingly require sub-second response times. == Market == Market sizing estimates for AIoT vary significantly depending on scope and definition. Fortune Business Insights valued the AIoT market at USD 35.65 billion in 2023, projecting growth to USD 253.86 billion by 2030 at a compound annual growth rate of 32.4%. Grand View Research estimated the broader market at USD 171.4 billion in 2024 with a CAGR of 31.7% through 2030, reflecting a wider definition that includes AI-integrated hardware components. North America accounted for approximately 40% of global market share in 2024, with the Asia-Pacific region projected as the fastest-growing market.
Read more →
Conditional random fields (CRFs) are a class of statistical modeling methods often applied in pattern recognition and machine learning and used for structured prediction. Whereas a classifier predicts a label for a single sample without considering "neighbouring" samples, a CRF can take context into account. To do so, the predictions are modelled as a graphical model, which represents the presence of dependencies between the predictions. The kind of graph used depends on the application. For example, in natural language processing, "linear chain" CRFs are popular, for which each prediction is dependent only on its immediate neighbours. In image processing, the graph typically connects locations to nearby and/or similar locations to enforce that they receive similar predictions. Other examples where CRFs are used are: labeling or parsing of sequential data for natural language processing or biological sequences, part-of-speech tagging, shallow parsing, named entity recognition, gene finding, peptide critical functional region finding, and object recognition and image segmentation in computer vision. == Description == CRFs are a type of discriminative undirected probabilistic graphical model. Lafferty, McCallum and Pereira define a CRF on observations X {\displaystyle {\boldsymbol {X}}} and random variables Y {\displaystyle {\boldsymbol {Y}}} as follows: Let G = ( V , E ) {\displaystyle G=(V,E)} be a graph such that Y = ( Y v ) v ∈ V {\displaystyle {\boldsymbol {Y}}=({\boldsymbol {Y}}_{v})_{v\in V}} , so that Y {\displaystyle {\boldsymbol {Y}}} is indexed by the vertices of G {\displaystyle G} . Then ( X , Y ) {\displaystyle ({\boldsymbol {X}},{\boldsymbol {Y}})} is a conditional random field when each random variable Y v {\displaystyle {\boldsymbol {Y}}_{v}} , conditioned on X {\displaystyle {\boldsymbol {X}}} , obeys the Markov property with respect to the graph; that is, its probability is dependent only on its neighbours in G and not its past states: P ( Y v | X , { Y w : w ≠ v } ) = P ( Y v | X , { Y w : w ∼ v } ) {\displaystyle P({\boldsymbol {Y}}_{v}|{\boldsymbol {X}},\{{\boldsymbol {Y}}_{w}:w\neq v\})=P({\boldsymbol {Y}}_{v}|{\boldsymbol {X}},\{{\boldsymbol {Y}}_{w}:w\sim v\})} , where w ∼ v {\displaystyle {\mathit {w}}\sim v} means that w {\displaystyle w} and v {\displaystyle v} are neighbors in G {\displaystyle G} . What this means is that a CRF is an undirected graphical model whose nodes can be divided into exactly two disjoint sets X {\displaystyle {\boldsymbol {X}}} and Y {\displaystyle {\boldsymbol {Y}}} , the observed and output variables, respectively; the conditional distribution p ( Y | X ) {\displaystyle p({\boldsymbol {Y}}|{\boldsymbol {X}})} is then modeled. === Inference === For general graphs, the problem of exact inference in CRFs is intractable. The inference problem for a CRF is basically the same as for an MRF and the same arguments hold. However, there exist special cases for which exact inference is feasible: If the graph is a chain or a tree, message passing algorithms yield exact solutions. The algorithms used in these cases are analogous to the forward-backward and Viterbi algorithm for the case of HMMs. If the CRF only contains pair-wise potentials and the energy is submodular, combinatorial min cut/max flow algorithms yield exact solutions. If exact inference is impossible, several algorithms can be used to obtain approximate solutions. These include: Loopy belief propagation Alpha expansion Mean field inference Linear programming relaxations === Parameter learning === Learning the parameters θ {\displaystyle \theta } is usually done by maximum likelihood learning for p ( Y i | X i ; θ ) {\displaystyle p(Y_{i}|X_{i};\theta )} . If all nodes have exponential family distributions and all nodes are observed during training, this optimization is convex. It can be solved for example using gradient descent algorithms, or Quasi-Newton methods such as the L-BFGS algorithm. On the other hand, if some variables are unobserved, the inference problem has to be solved for these variables. Exact inference is intractable in general graphs, so approximations have to be used. === Examples === In sequence modeling, the graph of interest is usually a chain graph. An input sequence of observed variables X {\displaystyle X} represents a sequence of observations and Y {\displaystyle Y} represents a hidden (or unknown) state variable that needs to be inferred given the observations. The Y i {\displaystyle Y_{i}} are structured to form a chain, with an edge between each Y i − 1 {\displaystyle Y_{i-1}} and Y i {\displaystyle Y_{i}} . As well as having a simple interpretation of the Y i {\displaystyle Y_{i}} as "labels" for each element in the input sequence, this layout admits efficient algorithms for: model training, learning the conditional distributions between the Y i {\displaystyle Y_{i}} and feature functions from some corpus of training data. decoding, determining the probability of a given label sequence Y {\displaystyle Y} given X {\displaystyle X} . inference, determining the most likely label sequence Y {\displaystyle Y} given X {\displaystyle X} . The conditional dependency of each Y i {\displaystyle Y_{i}} on X {\displaystyle X} is defined through a fixed set of feature functions of the form f ( i , Y i − 1 , Y i , X ) {\displaystyle f(i,Y_{i-1},Y_{i},X)} , which can be thought of as measurements on the input sequence that partially determine the likelihood of each possible value for Y i {\displaystyle Y_{i}} . The model assigns each feature a numerical weight and combines them to determine the probability of a certain value for Y i {\displaystyle Y_{i}} . Linear-chain CRFs have many of the same applications as conceptually simpler hidden Markov models (HMMs), but relax certain assumptions about the input and output sequence distributions. An HMM can loosely be understood as a CRF with very specific feature functions that use constant probabilities to model state transitions and emissions. Conversely, a CRF can loosely be understood as a generalization of an HMM that makes the constant transition probabilities into arbitrary functions that vary across the positions in the sequence of hidden states, depending on the input sequence. Notably, in contrast to HMMs, CRFs can contain any number of feature functions, the feature functions can inspect the entire input sequence X {\displaystyle X} at any point during inference, and the range of the feature functions need not have a probabilistic interpretation. == Variants == === Higher-order CRFs and semi-Markov CRFs === CRFs can be extended into higher order models by making each Y i {\displaystyle Y_{i}} dependent on a fixed number k {\displaystyle k} of previous variables Y i − k , . . . , Y i − 1 {\displaystyle Y_{i-k},...,Y_{i-1}} . In conventional formulations of higher order CRFs, training and inference are only practical for small values of k {\displaystyle k} (such as k ≤ 5), since their computational cost increases exponentially with k {\displaystyle k} . However, another recent advance has managed to ameliorate these issues by leveraging concepts and tools from the field of Bayesian nonparametrics. Specifically, the CRF-infinity approach constitutes a CRF-type model that is capable of learning infinitely-long temporal dynamics in a scalable fashion. This is effected by introducing a novel potential function for CRFs that is based on the Sequence Memoizer (SM), a nonparametric Bayesian model for learning infinitely-long dynamics in sequential observations. To render such a model computationally tractable, CRF-infinity employs a mean-field approximation of the postulated novel potential functions (which are driven by an SM). This allows for devising efficient approximate training and inference algorithms for the model, without undermining its capability to capture and model temporal dependencies of arbitrary length. There exists another generalization of CRFs, the semi-Markov conditional random field (semi-CRF), which models variable-length segmentations of the label sequence Y {\displaystyle Y} . This provides much of the power of higher-order CRFs to model long-range dependencies of the Y i {\displaystyle Y_{i}} , at a reasonable computational cost. Finally, large-margin models for structured prediction, such as the structured Support Vector Machine can be seen as an alternative training procedure to CRFs. === Latent-dynamic conditional random field === Latent-dynamic conditional random fields (LDCRF) or discriminative probabilistic latent variable models (DPLVM) are a type of CRFs for sequence tagging tasks. They are latent variable models that are trained discriminatively. In an LDCRF, like in any sequence tagging task, given a sequence of observations x = x 1 , … , x n {\displaystyle x_{1},\dots ,x_{n}} , the main problem the model must solve is how to assign a sequence of labels y = y 1 , … , y n {\displaystyle y_{1},\dots ,y_{n}} from one finite set
Read more →
In the context of generative artificial intelligence, AI agents (also referred to as compound AI systems or agentic AI) are a class of intelligent agents that can pursue goals, use tools, and take actions with varying degrees of autonomy. In practice, they usually operate within human-defined objectives, constraints, and available tools. == Overview == AI agents possess several key attributes, including goal-directed behavior, natural language interfaces, the capacity to use external tools, and the ability to perform multi-step tasks. Their control flow is frequently driven by large language models (LLMs). Agent systems may also include memory components, planning logic, tool interfaces, and orchestration software for coordinating agent components. AI agents do not have a standard definition. NIST describes agentic AI as an emerging area requiring standards for secure operation, interoperability, and reliable interaction with external systems. A common application of AI agents is task automation: for example, booking travel plans based on a user's prompted request. Companies such as Google, Microsoft and Amazon Web Services have offered platforms for deploying pre-built AI agents. Several protocols have been proposed for standardizing inter-agent communication, with examples including the Model Context Protocol, Gibberlink, and many others. Some of these protocols are also used for connecting agents to external applications. In December 2025, Linux Foundation announced the formation of the Agentic AI Foundation (AAIF), with the goal of ensuring agentic AI evolves transparently and collaboratively. == History == AI agents have been traced back to research from the 1990s, with Harvard professor Milind Tambe noting that the definition of an AI agent was not clear at the time. Researcher Andrew Ng has been credited with spreading the term "agentic" to a wider audience in 2024. == Training and testing == Researchers have attempted to build world models and reinforcement learning environments to train or evaluate AI agents. For example, video games such as Minecraft and No Man's Sky as well as replicas of company websites, have also been used for training such agents. == Autonomous capabilities == The Financial Times compared the autonomy of AI agents to the SAE classification of self-driving cars, likening most applications to level 2 or level 3, with some achieving level 4 in highly specialized circumstances, and level 5 being theoretical. == Cognitive architecture == The following are some internal design options for reasoning within an agent: Retrieval-augmented generation ReAct (Reason + Act) pattern is an iterative process in which an AI agent alternates between reasoning and taking actions, receives observations from the environment or external tools, and integrates these observations into subsequent reasoning steps. Reflexion, which uses an LLM to create feedback on the agent's plan of action and stores that feedback in a memory cache. A tool/agent registry, for organizing software functions or other agents that the agent can use. One-shot model querying, which queries the model once to create the plan of action. === Reference architecture === Ken Huang proposed an AI agent reference architecture, which consists of seven interconnected layers, with each layer building on the functionality of the layers beneath it: Layer 1: Foundation models - provide the core AI engines to power agent capabilities. Layer 2: Data operations - manage the complex data infrastructure required for AI agent operations, including Vector database, data loaders, RAG. Layer 3: Agent frameworks - sophisticated software and tools that simplify the development and management of the AI agents. Layer 4: Deployment and infrastructure - provide the robust technical foundation for running AI agents. Layer 5: Evaluation and observability - focus on assessing the safety and performance of AI agents. Layer 6: Security and compliance - a crucial protective framework ensuring AI agents operate safely, securely, and conform to regulatory boundaries. At this layer security and compliance features embedded into all the AI agent stack layers are integrated together. Layer 7: Agent ecosystem - represents the AI agents' interface with real-world applications and users. == Orchestration patterns == To execute complex tasks, autonomous agents are often integrated with other agents or specialized tools. These configurations, known as orchestration patterns or workflows, include the following: Prompt chaining: A sequence where the output of one step serves as the input for the next. Routing: The classification of an input to direct it to a specialized downstream task or tool. Parallelization: The simultaneous execution of multiple tasks. Sequential processing: A fixed, linear progression of tasks through a predefined pipeline. Planner-critic: An iterative pattern where one agent generates a proposal and another evaluates it to provide feedback for refinement. == Multimodal AI agents == In addition to large language models (LLMs), vision-language models (VLMs) and multimodal foundation models can be used as the basis for agents. In September 2024, Allen Institute for AI released an open-source vision-language model. Nvidia released a framework for developers to use VLMs, LLMs and retrieval-augmented generation for building AI agents that can analyze images and videos, including video search and video summarization. Microsoft released a multimodal agent model – trained on images, video, software user interface interactions, and robotics data – that the company claimed can manipulate software and robots. == Applications == As of April 2025, per the Associated Press, there are few real-world applications of AI agents. As of June 2025, per Fortune, many companies are primarily experimenting with AI agents. The Information divided AI agents into seven archetypes: business-task agents, for acting within enterprise software; conversational agents, which act as chatbots for customer support; research agents, for querying and analyzing information (such as OpenAI Deep Research); analytics agents, for analyzing data to create reports; software developer or coding agents (such as Cursor); domain-specific agents, which include specific subject matter knowledge; and web browser agents (such as OpenAI Operator). By mid-2025, AI agents have been used in video game development, gambling (including sports betting), cryptocurrency wallets (including cryptocurrency trading and meme coins) and social media. In August 2025, New York Magazine described software development as the most definitive use case of AI agents. Likewise, by October 2025, noting a decline in expectations, The Information noted AI coding agents and customer support as the primary use cases by businesses. In November 2025, The Wall Street Journal reported that few companies that deployed AI agents have received a return on investment. === Applications in government === Several government bodies in the United States and United Kingdom have deployed or announced the deployment of agents, at the local and national level. The city of Kyle, Texas deployed an AI agent from Salesforce in March 2025 for 311 customer service. In November 2025, the Internal Revenue Service stated that it would use Agentforce, AI agents from Salesforce, for the Office of Chief Counsel, Taxpayer Advocate Services and the Office of Appeals. That same month, Staffordshire Police announced that they would trial Agentforce agents for handling non-emergency 101 calls in the United Kingdom starting in 2026. In December 2025, the Department of Neighborhoods in Detroit, Michigan, in partnership with a local business, deployed a pilot project in two Detroit districts for an AI agent to be used for customer service calls. In February 2025, Thomas Shedd, the director of the Technology Transformation Services, proposed using AI coding agents across the United States federal government. A recruiter for the Department of Government Efficiency proposed in April 2025 to use AI agents to automate the work of about 70,000 United States federal government employees, as part of a startup with funding from OpenAI and a partnership agreement with Palantir. This proposal was criticized by experts for its impracticality, if not impossibility, and the lack of corresponding widespread adoption by businesses. In December 2025, the Food and Drug Administration announced that it would offer "agentic AI capabilities" to its staff for "meeting management, pre-market reviews, review validation, post-market surveillance, inspections and compliance and administrative functions." That same month, the United States Department of Defense launched GenAI.mil, an internal platform for American military personnel to use generative AI-based applications based on Google Gemini, including "intelligent agentic workflows". Defense Secretary Pete Hegseth listed applications such as "[conducting] deep r
Read more →
Semantic neural network (SNN) is based on John von Neumann's neural network [von Neumann, 1966] and Nikolai Amosov M-Network. There are limitations to a link topology for the von Neumann’s network but SNN accept a case without these limitations. Only logical values can be processed, but SNN accept that fuzzy values can be processed too. All neurons into the von Neumann network are synchronized by tacts. For further use of self-synchronizing circuit technique SNN accepts neurons can be self-running or synchronized. In contrast to the von Neumann network there are no limitations for topology of neurons for semantic networks. It leads to the impossibility of relative addressing of neurons as it was done by von Neumann. In this case an absolute readdressing should be used. Every neuron should have a unique identifier that would provide a direct access to another neuron. Of course, neurons interacting by axons-dendrites should have each other's identifiers. An absolute readdressing can be modulated by using neuron specificity as it was realized for biological neural networks. There’s no description for self-reflectiveness and self-modification abilities into the initial description of semantic networks [Dudar Z.V., Shuklin D.E., 2000]. But in [Shuklin D.E. 2004] a conclusion had been drawn about the necessity of introspection and self-modification abilities in the system. For maintenance of these abilities a concept of pointer to neuron is provided. Pointers represent virtual connections between neurons. In this model, bodies and signals transferring through the neurons connections represent a physical body, and virtual connections between neurons are representing an astral body. It is proposed to create models of artificial neuron networks on the basis of virtual machine supporting the opportunity for paranormal effects. SNN is generally used for natural language processing. == Related models == Computational creativity Semantic hashing Semantic Pointer Architecture Sparse distributed memory
Read more →
Space-based data centers or orbital AI infrastructure are proposed concepts to build AI data centers in the sun-synchronous orbit or other orbits utilizing space-based solar power. Electric power has become the main bottleneck for terrestrial AI infrastructure. Space-based edge computing has historical roots in military architectures designed to bypass the latency of ground-based targeting networks. In the 1980s, the Strategic Defense Initiative's Brilliant Pebbles program first envisioned autonomous on-orbit data processing for missile defense. In 2019, the Space Development Agency (SDA) began to revive this decentralized approach through its Proliferated Warfighter Space Architecture (PWSA). This ambitious "sensor-to-shooter" infrastructure is treated as a prerequisite for the modern Golden Dome program, which would rely on space-based data processing to continuously track targets. == History == Early thinking about space-based computing infrastructure grew out of mid-20th-century visions for large orbital industrial systems, most notably proposals for space-based solar power, which were popularized in both technical literature and science writing by figures such as Isaac Asimov in the 1940s. These ideas emphasized exploiting the vacuum, continuous solar energy, and thermal characteristics of space to support power-intensive activities that would be difficult or inefficient on Earth. In the 21st century, advances in small satellites, reusable launch vehicles, and high-performance computing revived interest in space-based data centers, with governments and private companies exploring orbital or near-space platforms for edge computing, secure data handling, and low-latency processing of Earth-observation data. In September 2024, Y Combinator-backed Starcloud released a white paper detailing plans to build multiple gigawatts of AI compute in orbit. It was the first widely cited proposal to actually start building large orbital data centers. In 2025, Starcloud deployed an NVIDIA H100-class system and became the first company to train an LLM in space and run a version of Google Gemini in space. In March 2025, Lonestar deployed a data backup machine on the surface of the moon. In early January 2026, a team from the University of Pennsylvania presented a tether-based architecture for orbital data centers at the AIAA SciTech conference. The design relied on gravity gradient tension and solar-pressure-based passive attitude stabilization to minimize the mass of MW-scale orbital data centers. In January 2026, SpaceX filed plans with the Federal Communications Commission (FCC) for millions of satellites, leveraging reusable launches and Starlink integration to extend cloud and AI computing into orbit. Around the same time, Blue Origin announced the TeraWave constellation of about 5,400 satellites, designed to provide high‑throughput networking for data centers, enterprise, and government customers. Meanwhile, China announced a 200,000‑satellite constellation, focusing on state coordination, data sovereignty, and in-orbit processing for secure, time-critical applications. In February 2026, Starcloud submitted a proposal to the FCC for a constellation of up to 88,000 satellites for orbital data centers. In March, it announced intentions to be the first to mine Bitcoin in space, flying bitcoin mining ASICs on its second satellite, Starcloud-2. In May 2026, Edge Aerospace was awarded a contract by the European Space Agency under its Space Cloud program to study use cases, architectures and implementation roadmap for orbital data centers. == Feasibility == In October 2025, Nature Electronics published a study led by a research group at Nanyang Technological University on the development of carbon-neutral data centres in space. In November 2025, Google published a feasibility study on space-based data centers. The authors argued that if launch costs to low earth orbit reached US$200/kg, the launch cost for data center satellites could be cost effective relative to current energy costs for ground-based data centers. They project this may occur around 2035 if SpaceX's Starship project scales to 180 launches/year by then. == Advantages == Some sun-synchronous orbit (SSO) planes have constant sunlight in the dawn/dusk which could provide continuous solar energy. SSO is a limited resource and proper management and sharing of it is required. Solar irradiance is 36% higher in Earth orbit than on the surface No Earth weather storms or clouds, however more exposed to Solar storms. No property tax or land-use regulation. Saves space for other land use. Ample space for scalability. Won't strain the power grid. Direct access to power source without additional infrastructure. == Disadvantages == The deployment of space-based data centers raises several technical, economic, and environmental concerns. Existing launch costs are substantial and remains main cost of space infrastructure deployment Cooling is limited to heat dissipation through radiation only, which made in inefficient in comparison to convection in terrestrial data centers Space infrastructure must be designed to survive launch and to work under environment conditions of radiation, wide range of temperatures, in vacuum and in microgravity In-space assembly is on early development stage to enable deployment of mega-structures Megastructures are particularly exposed to orbital debris Solar arrays efficiency decrease 0.5% to 0.8% per year due to exposure of ultraviolet rays, space weather and orbital thermal cycles Hardware is designed for limited lifespan. Maintenance and repair in space (known as On-Orbit Servicing (OOS)) is still on early stage of practical implementation. Disposable data centre: technology obsolescence of AI data centre being a concern and difficult maintenance in space imply the single-use purpose of those space data centres. To extend lifetime, space infrastructure will require either refueling or orbit rasie by the servicer, which is going to increase its operational costs The environmental impact on Earth has its own challenges: The environmental impact of launches need to be addressed. Deployment consumes Earth resources that cannot be recovered or recycled. Computers require lots of resources, some of which are strategic. Recycling e-waste is already a challenge on Earth and extremely unlikely in space. Space debris (orbit pollution) is another sustainability challenge for space: Orbits are, like any resources, a limited physical and electromagnetic resource and available for all mankind. The accumulation of satellites on a particular orbit reduces the use of space for other purposes. A consequence of the increase of satellite in orbit is a higher risk of the runaway of space debris (see Kessler syndrome). This means some orbits could become unusable. Latency and bandwidth are constrained in space, and consumes limited electromagnetic resources. Satellite flares could inhibit ground-based and space-based observational astronomy. == Size and power generated == It would take ~1 square mile solar array in earth orbit to produce 1 gigawatt of power at 30% cell efficiency. == Companies pursuing space-based AI infrastructure == Blue Origin Cowboy Space Corporation (formerly Aetherflux) Edge Aerospace Google – Project Suncatcher Nvidia OpenAI SpaceX Starcloud
Read more →
Rule induction is an area of machine learning in which formal rules are extracted from a set of observations. The rules extracted may represent a full scientific model of the data, or merely represent local patterns in the data. Data mining in general and rule induction in detail are trying to create algorithms without human programming but with analyzing existing data structures. In the easiest case, a rule is expressed with “if-then statements” and was created with the ID3 algorithm for decision tree learning. Rule learning algorithm are taking training data as input and creating rules by partitioning the table with cluster analysis. A possible alternative over the ID3 algorithm is genetic programming which evolves a program until it fits to the data. Creating different algorithm and testing them with input data can be realized in the WEKA software. Additional tools are machine learning libraries for Python, like scikit-learn. == Paradigms == Some major rule induction paradigms are: Association rule learning algorithms (e.g., Agrawal) Decision rule algorithms (e.g., Quinlan 1987) Hypothesis testing algorithms (e.g., RULEX) Horn clause induction Version spaces Rough set rules Inductive Logic Programming Boolean decomposition (Feldman) == Algorithms == Some rule induction algorithms are: Charade Rulex Progol CN2
Read more →
An intelligent decision support system (IDSS) is a decision support system that makes extensive use of artificial intelligence (AI) techniques. Use of AI techniques in management information systems has a long history – indeed terms such as "Knowledge-based systems" (KBS) and "intelligent systems" have been used since the early 1980s to describe components of management systems, but the term "Intelligent decision support system" is thought to originate with Clyde Holsapple and Andrew Whinston in the late 1970s. Examples of specialized intelligent decision support systems include Flexible manufacturing systems (FMS), intelligent marketing decision support systems and medical diagnosis systems. Ideally, an intelligent decision support system should behave like a human consultant: supporting decision makers by gathering and analysing evidence, identifying and diagnosing problems, proposing possible courses of action and evaluating such proposed actions. The aim of the AI techniques embedded in an intelligent decision support system is to enable these tasks to be performed by a computer, while emulating human capabilities as closely as possible. Many IDSS implementations are based on expert systems, a well established type of KBS that encode knowledge and emulate the cognitive behaviours of human experts using predicate logic rules, and have been shown to perform better than the original human experts in some circumstances. Expert systems emerged as practical applications in the 1980s based on research in artificial intelligence performed during the late 1960s and early 1970s. They typically combine knowledge of a particular application domain with an inference capability to enable the system to propose decisions or diagnoses. Accuracy and consistency can be comparable to (or even exceed) that of human experts when the decision parameters are well known (e.g. if a common disease is being diagnosed), but performance can be poor when novel or uncertain circumstances arise. Research in AI focused on enabling systems to respond to novelty and uncertainty in more flexible ways is starting to be used in IDSS. For example, intelligent agents that perform complex cognitive tasks without any need for human intervention have been used in a range of decision support applications. Capabilities of these intelligent agents include knowledge sharing, machine learning, data mining, and automated inference. A range of AI techniques such as case based reasoning, rough sets and fuzzy logic have also been used to enable decision support systems to perform better in uncertain conditions. A 2009 research about a multi-artificial system intelligence system named IILS is proposed to automate problem-solving processes within the logistics industry. The system involves integrating intelligence modules based on case-based reasoning, multi-agent systems, fuzzy logic, and artificial neural networks aiming to offer advanced logistics solutions and support in making well-informed, high-quality decisions to address a wide range of customer needs and challenges.
Read more →
MyRadar is a free weather forecasting application developed by Andy Green and his Orlando, Florida-based company ACME AtronOmatic (ACME). The app began operations in 2008 and ran on government-provided weather and radar data for its first decade. In 2019, ACME launched personal satellites to improve predictions of ongoing weather. The app received funding to improve its radar and imaging from the Federal Communications Commission (FCC), National Oceanic and Atmospheric Administration (NOAA), and the Office of Naval Research (ONR). ACME created a weather data satellite constellation named "Hyperspectral Orbital Remote Imaging Spectrometer" (HORIS), which utilizes machine learning and artificial intelligence (AI) to create a current weather map. With the introduction of additional features, including the detection of wildfires and illegal fishing, the app has more broadly become an environmental intelligence app since 2022. In 2024, the app partnered with the Total Traffic and Weather Network (TTWN) to provide traffic flow and incident data for users with paying subscriptions via CarPlay and Android Auto. == History == The app's creator, Andy Green, had created internet tech since the 1980s. His first major project was the development of a public access internet service company based in Rhode Island, which he later sold to finance the creation of ACME AtronOmatic ("ACME" for short), based in Orlando, Florida. The first major app created by ACME was called "Flightwise", which provided users with flight tracking information. In summer 2008, Green had the idea to use the animated location tracker already built-in to Flightwise to make a stand-alone weather forecasting app after wondering if a meal he was eating outdoors would get rained out. MyRadar was launched in 2012 out of an office in Orlando. Despite running solely off of free government-provided weather and radar data for the first decade after launch, Green said the app "took off like wildfire" in downloads. In December 2017, the app partnered with "TripIt" to provide users with information about flight delays and gate changes, eliminating the need for a separate app like Flightwise. In 2019, ACME launched their first personal satellite for the app, a small prototype from New Zealand, as part of an effort to provide detailed imagery and improved predictions of ongoing weather unique to the app. More satellites were eventually launched by ACME to create a weather data satellite constellation named "Hyperspectral Orbital Remote Imaging Spectrometer" (HORIS), monitored by ground stations maintained by Kongsberg Satellite Services. HORIS operates MyRadar by taking the environmental data and imagery it collects and pairing it with machine learning and artificial intelligence (AI) to create a real-time weather map. In 2022, HORIS was expanded upon after ACME won approval from the Federal Communications Commission (FCC) to improve their satellite constellation to include 250 satellites or more. The main batch of satellites were PocketQubes, which entered the atmosphere on May 2, 2022, by Rocket Lab Electron launched from New Zealand, with the additional purpose to test and validate the existing satellites in orbit. In October 2022, ACME received a US$150,000 Small Business Innovation Research (SBIR) grant from the National Oceanic and Atmospheric Administration (NOAA) to improve the app's wildfire detection and air quality measurement technology to better detect smoke, aerosols, fire hotspots using satellites and aerial drones. On August 18, 2023, phase two of the NOAA grant was approved, providing an additional US$650,000 to aid in the app's aforementioned goals by launching a pair of CubeSat satellites to provide high-definition infrared imagery. On September 8, 2023, ACME secured another US$1,200,000 in crowd funding to aid accomplishing the goals of the NOAA grant by expanding the app's workforce from 35 to 100 employees by the end of 2024. In January 2024, MyRadar partnered with Total Traffic and Weather Network (TTWN) to provide traffic data overlaid with its pre-existing weather graphics for users in the United States. The partnership allowed for the app to additionally become a tool for navigation. This officially became a feature days later on January 8, 2024, when the app was made compatible with Apple's CarPlay. On February 7, 2024, the Android equivalent Android Auto also gained the ability to display the app on car interfaces. In March 2024, the app launched a "meteorological wedding planning service" in the United States and Canada for prices between US$1,000 and US$5,000, in which users can request a personal meteorologist to provide an in-person meeting about the best dates for a wedding, and on-call local weather updates the day of. Scheduled for February 2025, four more satellites to help with the NOAA-sponsored wildfire detection are to be launched, and the first by ACME to have AI processing in the satellites themself and not computers on the ground, allowing for quicker transfer of information. == Features and general information == The app's primary function is to provide weather forecasting and prediction to users. The app includes toggleable options to track and send alerts to users for rain, wind patterns, earthquakes, tornadoes, tropical cyclones, wildfires, and more. In early 2020, a feature was added to track orbital objects such as the International Space Station. In May 2022, with the imagery improvement of HORIS, the app gained the secondary abilities to better monitor algae blooms, coral reefs, illegal fishing, and wildfires. In January and February 2024, the ability to display traffic flow and incident data in a feature called "RouteCast" was added, and can be displayed in video and 3D options via CarPlay and Android Auto for users with paying subscriptions. The app also provides annual tropical storm and tornado outlooks for their respective seasons, gathered through satellite and aerial drone data, as well as through on the ground storm chasers.
Read more →
Smart speakers, or AI speakers, have been developed by multiple domestic electronics and telecommunications firms in South Korea. Since their introduction to the local market in 2016, they have been used by millions of people in the country. == Brands == === Google === In September 2018, Google Home (including the Google Home Mini) launched in South Korea. Running Google Assistant, it featured simultaneous recognition of two languages among a total of seven, including Korean. At launch, it could play music from Bugs!, in addition to YouTube. === Kakao === In November 2017, Kakao launched the Kakao Mini, featuring integrated KakaoTalk functionality. === KT === KT launched the GiGA Genie smart speaker in January 2017, using a Harman Kardon speaker. In November 2017, KT announced GiGA Genie LTE, a portable AI speaker with LTE support. They also released a mini speaker called GiGA Genie Buddy. In 2018, KT created a special version of GiGa Genie with a screen for use in hotels. On 29 April 2019, KT announced the GiGA Genie Table TV, a consumer-oriented smart speaker with a display. It featured paid TV access through Wi-Fi. Based on usage data from the hotel model, KT decided not to add a touchscreen. The Table TV also featured a limited-access "personalized-text-to-speech technology" which could use parents' voice recording inputs to read children books. In February 2022, KT began rolling out Amazon Alexa integration into its speakers for English support. === Naver === In August 2017, Naver announced the Wave smart speaker, operating on Clova. In October 2017, Naver launched the Friends smart speaker, which were designed based on Line characters. ==== LG Uplus ==== In December 2017, LG Uplus launched the Friends+ speaker with Naver, operating on U+ Home AI. === Samsung === In August 2018, Samsung announced the Samsung Galaxy Home in partnership with Spotify. The original size was delayed, while the Galaxy Home Mini appeared briefly as a bonus for Samsung Galaxy S20 preorders in South Korea in February 2020. === SK Telecom === SK Telecom launched the Nugu smart speaker in September 2016, using an Astell & Kern audio system. In August 2017, SKT released a portable speaker named Nugu mini. In July 2018, SKT launched the Nugu Candle, featuring expanded mood lighting. The first-generation Nugu was subsequently discontinued. On 18 April 2019, SKT released the NUGU Nemo AI, which featured a display and JBL stereo speaker. In August 2019, SKT collaborated with SM Entertainment, incorporating functions related to the agency's artists into Nugu. In January 2022, SKT showcased the NUGU Candle SE, introducing Alexa support. == Usage == In 2018, approximately 3 million people in South Korea used smart speakers. According to data from KT in 2018, the most common commands to its speakers were for controlling televisions. Based on a broader survey in 2017, music was selected as the most frequent use case. By 2018, smart speaker companies were partnering with reading and other education services, adding potential use-cases for children. By 2022, smart speakers were being utilized by the South Korean government. SKT, in partnership with 70 regional governments, distributed smart speakers to 12,000 senior citizens living alone. The government paid for monthly subscriptions to help seniors stay mentally engaged. Naver made an agreement with the Seoul Metropolitan Government to provide Clova CareCall, an automated health checkup program to hundreds of senior citizens living alone. KT's AI care service included an emergency dispatch call function and medication notifications. == Criticism == === Communication === In a survey of 300 users in 2017, approximately half reported having some type of communication issue with their smart speakers. === Privacy === South Korean smart speakers sparked privacy concerns when they were found to be collecting and documenting user audio data in 2019. The speaker companies responded that only a minority of data was collected and that it was anonymized. They stated that such recordings were collected for performance improvements.
Read more →
POP-11 is a reflective, incrementally compiled programming language with many of the features of an interpreted language. It is the core language of the Poplog programming environment developed originally by the University of Sussex, and recently in the School of Computer Science at the University of Birmingham, which hosts the main Poplog website. POP-11 is an evolution of the language POP-2, developed in Edinburgh University, and features an open stack model (like Forth, among others). It is mainly procedural, but supports declarative language constructs, including a pattern matcher, and is mostly used for research and teaching in artificial intelligence, although it has features sufficient for many other classes of problems. It is often used to introduce symbolic programming techniques to programmers of more conventional languages like Pascal, who find POP syntax more familiar than that of Lisp. One of POP-11's features is that it supports first-class functions. POP-11 is the core language of the Poplog system. The availability of the compiler and compiler subroutines at run-time (a requirement for incremental compiling) gives it the ability to support a far wider range of extensions (including run-time extensions, such as adding new data-types) than would be possible using only a macro facility. This made it possible for (optional) incremental compilers to be added for Prolog, Common Lisp and Standard ML, which could be added as required to support either mixed language development or development in the second language without using any POP-11 constructs. This made it possible for Poplog to be used by teachers, researchers, and developers who were interested in only one of the languages. The most successful product developed in POP-11 was the Clementine data mining system, developed by ISL. After SPSS bought ISL, they renamed Clementine to SPSS Modeler and decided to port it to C++ and Java, and eventually succeeded with great effort, and perhaps some loss of the flexibility provided by the use of an AI language. POP-11 was for a time available only as part of an expensive commercial package (Poplog), but since about 1999 it has been freely available as part of the open-source software version of Poplog, including various added packages and teaching libraries. An online version of ELIZA using POP-11 is available at Birmingham. At the University of Sussex, David Young used POP-11 in combination with C and Fortran to develop a suite of teaching and interactive development tools for image processing and vision, and has made them available in the Popvision extension to Poplog. == Simple code examples == Here is an example of a simple POP-11 program: define Double(Source) -> Result; Source2 -> Result; enddefine; Double(123) => That prints out: 246 This one includes some list processing: define RemoveElementsMatching(Element, Source) -> Result; lvars Index; [[% for Index in Source do unless Index = Element or Index matches Element then Index; endunless; endfor; %]] -> Result; enddefine; RemoveElementsMatching("the", [[the cat sat on the mat]]) => ;;; outputs [[cat sat on mat]] RemoveElementsMatching("the", [[the cat] [sat on] the mat]) => ;;; outputs [[the cat] [sat on] mat] RemoveElementsMatching([[= cat]], [[the cat]] is a [[big cat]]) => ;;; outputs [[is a]] Examples using the POP-11 pattern matcher, which makes it relatively easy for students to learn to develop sophisticated list-processing programs without having to treat patterns as tree structures accessed by 'head' and 'tail' functions (CAR and CDR in Lisp), can be found in the online introductory tutorial. The matcher is at the heart of the SimAgent (sim_agent) toolkit. Some of the powerful features of the toolkit, such as linking pattern variables to inline code variables, would have been very difficult to implement without the incremental compiler facilities.
Read more →
The AI effect is a phenomenon in which advances in artificial intelligence lead to a redefinition of what is considered intelligence, such that capabilities achieved by AI systems are no longer regarded as examples of "real" intelligence. The concept has been used to describe both a cognitive tendency and a sociotechnical pattern, in which successful AI techniques are reclassified as routine computation or absorbed into other domains. Historian Pamela McCorduck described this as a recurring feature of AI research, noting in her 2004 book Machines Who Think that once a problem is solved, it is no longer considered evidence of intelligence. Researcher Rodney Brooks similarly observed in 2002 that once systems are understood, they are often regarded as "just computation". == Definition == The AI effect refers to a shift in how intelligence is defined as machines acquire new capabilities. Tasks such as playing chess, recognizing speech, or interpreting images were historically considered indicators of intelligence, but after successful automation they are often reclassified as routine computation. McCorduck described this as an "odd paradox", in which successful AI systems are assimilated into other domains, leaving AI researchers to focus on unsolved problems. The phenomenon is often interpreted as an instance of moving the goalposts. A commonly cited formulation is Tesler's theorem, often expressed as "AI is whatever hasn't been done yet". When problems are not fully formalised, they may be described using models involving human computation, such as human-assisted Turing machines. == Historical examples == === Game playing === Early AI systems capable of playing games such as checkers and chess were initially regarded as demonstrations of machine intelligence. As these systems improved and became better understood, their achievements were often reinterpreted as examples of computation rather than intelligence. The victory of IBM's Deep Blue over Garry Kasparov in 1997 is a frequently cited example. Critics argued that the system relied on brute-force methods rather than genuine understanding. === Pattern recognition === Technologies such as optical character recognition and speech recognition were once considered core problems in artificial intelligence. As these systems became reliable and widely deployed, they were increasingly treated as standard engineering solutions. === Integration into applications === Many techniques originally developed within AI research have been incorporated into broader technological systems, including marketing, automation, and software applications. Michael Swaine reported in 2007 that AI advances are often presented as developments in other fields. Marvin Minsky observed that successful AI innovations often evolve into separate disciplines. Nick Bostrom noted in 2006 that widely adopted technologies are often no longer labeled as AI. == Contemporary discussion == The AI effect continues to be discussed in the context of recent advances in machine learning, particularly large language models and other generative AI systems. As these systems have become more widely used, some researchers and commentators have noted that their capabilities are frequently described as statistical or mechanical once understood, rather than as intelligence. A 2016 survey of artificial intelligence also noted that AI systems are increasingly embedded in everyday applications, reinforcing earlier observations that successful AI technologies tend to become normalized and no longer identified as AI. At the same time, the widespread commercial use of artificial intelligence has led to greater visibility of the field, contrasting with earlier periods in which AI techniques were often present but unacknowledged. == Interpretations == === Cognitive bias === Some authors describe the AI effect as a cognitive bias in which expectations of intelligence shift as machines achieve new capabilities. === Sociotechnical perspective === Another interpretation emphasizes how technologies are reclassified over time as they become widespread and commercially successful. === Philosophical debate === Some philosophers argue that reclassification reflects genuine conceptual distinctions rather than bias. == Historical context == During periods such as the AI winter, researchers sometimes avoided the term "artificial intelligence" due to negative perceptions. In the 21st century, however, the term "AI" has become widely used in public discourse and marketing. == Broader implications == The AI effect has been linked to broader questions about human uniqueness and the nature of intelligence. Michael Kearns suggested that people may seek to preserve a special role for humans. Similar patterns have been observed in studies of animal cognition. Herbert A. Simon noted that artificial intelligence can provoke strong emotional reactions.
Read more →
metigo is a software application that performs image-based modelling and close range photogrammetry. It produces rectified imagery plans, true ortho-projections on planar, cylindric and conic surfaces, 3D photorealistic models, measurements from photography and mappings on a photographic base for uses in the cultural heritage sector, mainly conservation. == Products == The metigo product line currently consists of the mapping software metigo MAP, the stereo-photogrammetry modeling software metigo 3D, the free viewer metigo VIEW. These products are all standalone and are not depending on other software, such as AutoCAD. === metigo MAP === metigo MAP is mainly used to map findings and conservation measured on a uniform metric photographic base. Therefore, photos of planar surfaces can be rectified based on geometrical informations, e.g. height and width of a rectangle, or cartesian coordinates measured by total station. Beside rectified imagery several other metric mapping bases can be imported and used: true ortho-projections; scaled scans of plans and plots; CAD-files; 3D models, such as digital surface models (DSM) produced by stereo-photogrammetry, SfM or 3D scanning. metigo MAP 's strong point is that rectified imagery taken with different techniques (visual light, sided light, IR, UV, UV-fluorescence, X-ray), historic images and photos taken at various stages of the conservation process can be superimposed and evaluated mutually. The user can allocate several attributes, such as different conservation measures and damage classes, to the mapped geometries. The mappings can be analysed by geometries as well as by user-defined attributes at any stage of the project. metigo MAP targets mainly conservators in different cultural heritage fields. Using it no specialist knowledge of surveying and photogrammetric techniques are needed. === metigo 3D === metigo 3D is a stereo-photogrammetric kit that allows to calculate bundle adjustments (axios3D), create high-quality 3D point clouds using multiple stereo photo pairs combined with metric survey data, mesh these point clouds, texture the meshes with high-resolution image data to create photo-realistic models, ortho-project orientated images on digital surface models (DSM) on planes and best-fit cylinders and cones, create unwrappings and developed views of curved surfaces, analyse deformations of 3D surfaces. metigo 3D targets metric survey specialists working in the cultural heritage sector. == Supported file formats == metigo has the ability to read the following formats: images: JPEG (.jpg), Tiff (.tif), Bitmaps (.bmp), CompuServ (.gif), Encapsualated Postscript (.eps), PCX (.pcx), Photo-CD (.pcd), PICT (.pcd), PNG (.png), Targa (.tga), RAW-format of several camera brands. CAD: DBX, DXF, DWG. 3D: many ASCII-formats (.stl, .wrl, etc.) point data: format editor for ASCII files. == Supported languages == Currently, an English and German version of the software is supported. For metigo MAP beside these a French and Polish GUI is offered for sale. == Applications == The main applications of metigo are: conservation in the cultural heritage context, e.g. stone conservation paintings tapestry etc. architecture, archaeology, many other are possible, e.g. forensics. == History == The first public release of metigo was in 2000.
Read more →
RTX Video Super Resolution (RTX VSR) is a video scaling feature by Nvidia. It was released on February 28, 2023. == History == The feature was first unveiled during CES 2023 as RTX Video Super Resolution. It uses the on-board Tensor Cores to upscale browser video content in real time. Video Super Resolution was initially only available on RTX 30 and 40 series GPUs, while support for 20 series GPUs was added afterwards; it is now available on all Nvidia RTX-branded GPUs. The feature supports input resolutions from 360p to 1440p and a max output of 4K and comes without support for HDR content although that could be likely added in the future. Nvidia released RTX Video Super Resolution 1.5 with improved video quality and RTX 20 series support on October 17, 2023. == Reception == According to ComputerBase, although "the algorithm is not yet working flawlessly", the feature is "overall recommendable".
Read more →
The U.S. Tech Force (also styled as US Tech Force, Tech Force, or Government Tech Force) is a federal hiring initiative launched by the second Donald Trump administration in December 2025. The program, administered by the Office of Personnel Management (OPM), aims to recruit about 1,000 early-career technology professionals into two-year government jobs to modernize federal IT systems, advance artificial intelligence (AI) capabilities, and address technological gaps in government operations. The initiative is an effort to plug capability gaps created by Trump-administration efforts to shrink the federal government, which led to the departure of some 220,000 federal employees, including many in IT. The initiative seeks early-career workers; officials said it would offer competitive salaries and opportunities to work on high-impact government technology projects. Major technology companies—including Amazon, Apple, Microsoft, Nvidia, Meta, Google, and OpenAI—agreed to help identify and refer candidates. Candidates are allowed to take Tech Force positions on leaves of absence and without divesting their stock, raising conflict-of-interest questions. In January 2026, OPM direction Scott Kupor said the deadline for applying to Tech Force was being extended because of "tremendous interest" without saying how many people had actually applied. Also in December 2025, news broke that the administration is planning another novel use of private-sector workers: hiring cybersecurity firms for offensive cyber operations.
Read more →