AI Generator Detector

AI Generator Detector — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • NAPLPS

    NAPLPS

    NAPLPS (North American Presentation Layer Protocol Syntax) is a graphics language for use originally with videotex and teletext services. NAPLPS was developed from the Telidon system developed in Canada, with a small number of additions from AT&T Corporation. The basics of NAPLPS were later used as the basis for several other microcomputer-based graphics systems. == History == The Canadian Communications Research Centre (CRC), based in Ottawa, had been working on various graphics systems since the late 1960s, much of it led by Herb Bown. Through the 1970s they turned their attention to building out a system of "picture description instructions", which encoded graphics commands as a text stream. Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6-bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". These instructions were decoded by separate programs to produce graphics output, on a plotter for instance. Other work produced a fully interactive version. In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a color display. During this period, a number of companies were developing the first teletext systems, notably the BBC's Ceefax system. Ceefax encoded character data into the lines in the vertical blanking interval of normal television signals where they could not be seen on-screen, and then used a buffer and decoder in the user's television to convert these into "pages" of text on the display. The Independent Broadcasting Authority quickly introduced their own ORACLE system, and the two organizations subsequently agreed to use a single standard, the "Broadcast Teletext Specification". This later became World System Teletext. At about the same time, other organizations were developing videotex systems, similar to teletext except they used modems to transmit their data instead of television signals. This was potentially slower and used up a telephone line, but had the major advantage of allowing the user to transmit data back to the sender. The UK's General Post Office developed a system using the Ceefax/ORACLE standard, launching it as Prestel, while France prepared the first steps for its ultimately very successful Minitel system, using a rival display standard called Antiope. By 1977, the Norpak system was running, and from this work the CRC decided to create their own teletext/videotext system. Unlike the systems being rolled out in Europe, the CRC decided from the start that the system should be able to run on any combination of communications links. For instance, it could use the vertical blanking interval to send data to the user, and a modem to return selections to the servers. It could be used in a one-way or two-way system. In teletext mode, character codes were sent to users' televisions by encoding them as dot patterns in the vertical blanking interval of the video signal. Various technical "tweaks" and details of the NTSC signals used by North American televisions allowed the downstream videotex channel to increase to 600 bit/s, about twice that used in the European systems. In videotext mode, Bell 202 modems were typical, offering a 1,200 bit/s download rate. A set top box attached to the TV decoded these signals back into text and graphics pages, which the user could select among. The system was publicly launched as Telidon on August 15, 1978. Compared to the European standards, the CRC system was faster, bi-directional, and offered real graphics as opposed to simple character graphics. The downside of the system was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors with RGB and/or RF output. The Innovation, Science and Economic Development Canada (then Department of Communications) launched a four-year plan to fund public roll-outs of the technology in an effort to spur the development of a commercial Telidon system. AT&T Corporation was so impressed by Telidon that they decided to join the project. They added a number of useful extensions, notably the ability to define original graphics commands (macro) and character sets (DRCS). They also tabled algorithms for proportionally spaced text, which greatly improved the quality of the displayed pages. A joint CSA/ANSI working group (X3L2.1) revised the specifications, which were submitted for standardization. In 1983, they became CSA T500 and ANSI X3.110, or NAPLPS. The data encoding system was also standardized as the NABTS (North American Broadcast Teletext Specification) protocol. Business models for Telidon services were poorly developed. Unlike the UK, where teletext was supported by one of only two large companies whose whole revenue model was based on a read-only medium (television), in North America Telidon was being offered by companies who worked on a subscriber basis. == One-way systems == Telidon-based teletext was tested in a few North American trials in the early 1980s — CBC IRIS, TVOntario, MTS-sponsored Project IDA, to name a few. NAPLPS was also part of the NABTS teletext standard, for the encoding and display of teletext pages. In the late 1980s and early 1990s, affiliates of the regional sports network group SportsChannel ran a service called Sports Plus Network, which ran sports news and scores while SportsChannel was not otherwise on the air. The screens, which frequently featured team logos or likenesses of players in addition to text, were drawn entirely with NAPLPS graphics and resembled the loading of Prodigy pages over a modem, though slightly faster. == Two-way systems == Various two-way systems using NAPLPS appeared in North America in the early 1980s. The biggest North American examples were Knight Ridder's Viewtron (based in Miami) and the Los Angeles Times' Gateway service (based in Orange County). Both used the Sceptre NAPLPS terminal from AT&T. The Sceptre contained a slow modem that connected over the consumer's telephone line to host computers. The Sceptre was expensive whether purchased or rented. Despite huge investments by their parent companies, neither Viewtron nor Gateway lasted into the second half of the decade. Another system, Keyfax, was developed by Keycom Electronic Publishing, a joint venture of Honeywell, Centel (since acquired by Sprint) and Field Enterprises, then-owner of the Chicago Sun-Times newspaper. Keyfax had originally been a WST teletext service, broadcast overnights on Field's Chicago television station WFLD-32 and through the VBI of both WFLD and national superstation WTBS; the decision was made to convert Keyfax into a subscription service, using a proprietary NAPLPS terminal device in a last-ditch effort to save the service. It did not work and Keyfax had ceased operations by the end of 1986. Other early-1980s NAPLPS technology was deployed in Canada, both as a way for rural Canadians to get news and weather information and as the platform for touchscreen information kiosks. In Vancouver these were featured at Expo 86. The kiosks became ubiquitous in Toronto under the name Teleguide, and were deployed in many shopping centres and at major tourist attractions. The latter city was the North American nexus of NAPLPS and the home of Norpak, the most successful of NAPLPS-oriented developers. Norpak created and sold hardware and software for NAPLPS development and display. TVOntario also developed NAPLPS content creation software. London, Ontario - based Cableshare used NAPLPS as the basis of touch-screen information kiosks for shopping malls, the flagship of which was deployed at Toronto's Eaton Centre. The system relied on an 8085-based microcomputer which drove several NAPLPS terminals fitted with touch screens, all communicating via Datapac to a back end database. The system offered news, weather and sports information along with shopping mall guides and coupons. Cableshare also developed and sold a leading NAPLPS page creation utility called the "Picture Painter." In the late 1980s, Tribune Media Services (TMS) and the Associated Press operated a cable television channel called AP News Plus that provided NAPLPS-based news screens to cable television subscribers in many U.S. cities. The news pages were created and edited by TMS staffers working on an Atex editing system in Orlando, Florida, and sent by satellite to NAPLPS decoder devices located at the local cable television companies. Among the firms providing technology to TMS and the Associated Press for the AP News Plus channel was Minneapolis-based Electronic Publishers Inc. (1985–1988). In 1981, two amateur radio operators (VE3FTT and VE3GQW) received special permission from the Canad

    Read more →
  • Data cube

    Data cube

    In computer programming, a data cube (or datacube) is a multi-dimensional array of values. Typically, the term "data cube" is applied in contexts where these arrays are massively larger than the hosting computer's main memory; examples include multi-terabyte/petabyte data warehouses and time series of image data. Even though it is called a cube, a data cube generally is a multi-dimensional concept which can be 1-dimensional, 2-dimensional, 3-dimensional, or higher-dimensional. The data cube is used to represent data (sometimes called facts) along some dimensions of interest. In satellite image timeseries, dimensions would be latitude and longitude coordinates and time; a fact (sometimes called measure) would be a pixel at a given space and time as taken by the satellite. For example, in online analytical processing, an OLAP cube about a company would have dimensions that could be the company subsidiaries, the company products, and time; in this setup, a fact would be a sales event where a particular product has been sold in a particular subsidiary at a particular time. In any case, every dimension divides data into groups of cells whereas each cell in the cube represents a single measure of interest. Sometimes cubes hold only a few values with the rest being empty, i.e. undefined, while sometimes most or all cube coordinates hold a cell value. In the first case such data are called sparse, and in the second case they are called dense, although there is no hard delineation between the two. Data cubes may be stored in database management systems (DBMS) as part of array DBMS. Spatio-temporal databases and geospatial databases may also be represented as coverage data. == History == Multi-dimensional arrays have long been familiar in programming languages. Fortran offers arbitrarily-indexed 1-D arrays and arrays of arrays, which allows the construction of higher-dimensional arrays, up to 15 dimensions. APL supports n-D arrays with a rich set of operations. All these have in common that arrays must fit into the main memory and are available only while the particular program maintaining them (such as image processing software) is running. A series of data exchange formats support storage and transmission of data cube-like data, often tailored towards particular application domains. Examples include MDX for statistical (in particular, business) data, Zarr and Hierarchical Data Format for general scientific data, and TIFF for imagery. In 1992, Peter Baumann introduced management of massive data cubes with high-level user functionality combined with an efficient software architecture. Datacube operations include subset extraction, processing, fusion, and in general queries in the spirit of data manipulation languages like SQL. Some years after, the data cube concept was applied to describe time-varying business data as data cubes by Jim Gray, et al., and by Venky Harinarayan, Anand Rajaraman and Jeff Ullman. Around that time, a working group on Multi-Dimensional Databases ("Arbeitskreis Multi-Dimensionale Datenbanken") was established at German Gesellschaft für Informatik. Datacube Inc. was an image processing company selling hardware and software applications for the PC market in 1996, however without addressing data cubes as such. The EarthServer initiative has established geo data cube service requirements. == Standardization == In 2018, the ISO SQL database language was extended with data cube functionality as "SQL – Part 15: Multi-dimensional arrays (SQL/MDA)". Web Coverage Processing Service is a geo data cube analytics language issued by the Open Geospatial Consortium in 2008. In addition to the common data cube operations, the language knows about the semantics of space and time and supports both regular and irregular grid data cubes, based on the concept of coverage data. An industry standard for querying business data cubes, originally developed by Microsoft, is MultiDimensional eXpressions. == Implementation == Many high-level computer languages treat data cubes and other large arrays as single entities distinct from their contents. These languages, of which Fortran, APL, IDL, NumPy, PDL, and S-Lang are examples, allow the programmer to manipulate complete film clips and other data en masse with simple expressions derived from linear algebra and vector mathematics. Some languages (such as PDL) distinguish between a list of images and a data cube, while many (such as IDL) do not. Array DBMSs (Database Management Systems) offer a data model which generically supports definition, management, retrieval, and manipulation of n-dimensional data cubes. This database category has been pioneered by the rasdaman system since 1994. == Applications == Multi-dimensional arrays can meaningfully represent spatio-temporal sensor, image, and simulation data, but also statistics data where the semantics of dimensions is not necessarily of spatial or temporal nature. Generally, any kind of axis can be combined with any other into a data cube. === Mathematics === In mathematics, a one-dimensional array corresponds to a vector, a two-dimensional array resembles a matrix; more generally, a tensor may be represented as an n-dimensional data cube. === Science and engineering === For a time sequence of color images, the array is generally four-dimensional, with the dimensions representing image X and Y coordinates, time, and RGB (or other color space) color plane. For example, the EarthServer initiative unites data centers from different continents offering 3-D x/y/t satellite image timeseries and 4-D x/y/z/t weather data for retrieval and server-side processing through the Open Geospatial Consortium WCPS geo data cube query language standard. A data cube is also used in the field of imaging spectroscopy, since a spectrally-resolved image is represented as a three-dimensional volume. Earth observation data cubes combine satellite imagery such as Landsat 8 and Sentinel-2 with Geographic information system analytics. === Business intelligence === In online analytical processing (OLAP), data cubes are a common arrangement of business data suitable for analysis from different perspectives through operations like slicing, dicing, pivoting, and aggregation.

    Read more →
  • InstallCore

    InstallCore

    InstallCore (stylized as installCore) was an installation and content distribution platform created by ironSource, considered potentially unwanted programs (PUP) by a number of anti-malware vendors. It included a software development kit (SDK) for Windows and Mac OS X. The program allowed those using it for distribution to include monetization by advertisements or charging for installation, and made its installations invisible to the user and its anti-virus software. The platform and its programs have been rated potentially unwanted programs (PUP) or potentially unwanted applications (PUA) by anti-malware product vendors since 2014, and by Windows Defender Antivirus since 2015. The platform was primarily designed for efficient web-based deployment of various types of application software. As of August 2012, InstallCore was managing 100 million installations every month, offering services for paid, unpaid, and free software by using the SDK version. == History == The InstallCore team introduced the first version of the SDK at the beginning of 2011. The SDK was a fork of the FoxTab installer and had only basic Installation features. InstallCore was discontinued as part of a company flotation in late 2020. == Criticism and malware classification == InstallCore and its software packages have been classified as potentially unwanted programs (PUP) or potentially unwanted applications (PUA), by anti-malware product vendors and Windows Defender Antivirus from 2014–2015 onwards, with many stating that it installs adware and other additional PUPs. Malwarebytes identified the program as "a family of bundlers that installs more than one application on the user's computer". It has been described as "crossing the line into full-blown malware" and a "nasty Trojan".

    Read more →
  • The Business Cloud

    The Business Cloud

    The Business Cloud is an API enabled self-service platform, developed by Domo, that provides an array of services like data connection and data visualization. == History == Domo, Inc. was founded in 2010 by Josh James who also co-founded the web analytics software company Omniture in 1996, which he took public in 2006. Domo launched the Domo Appstore, with 1,000 apps with social and mobile capabilities, in 2016. This appstore creates a network of business apps and an ecosystem of companies into a single, integrated business cloud. This decision came after Domo announced a $131 million round of funding from BlackRock. According to the company, the concept behind The Business Cloud is to connect smaller clouds relating to apps or other functional areas of a business into a single business cloud that allows self-service and other social features to customers. == Services == The Business Cloud is offered as a free service, claimed to be the world's first business cloud with Domo appstore as one of its core services. This free package includes all of the Domo's features and functionality including Domo platform, Domo Apps, visualizations, alerts, company directories, org charts, profiles, tasks and Domo Mobile. The Business Cloud allows customers to leverage their preferred cloud as well as on-premises software and monitor all aspects of their business in routine. The company is supported by a $500 million fund from investors all over the world.

    Read more →
  • List of online database creator apps

    List of online database creator apps

    This list of online database creator apps lists notable web apps where end users with minimal database administration expertise can create online databases to share with team members. Users need not have the coding skills to manage the solution stack themselves, because the web app already provides this predefined functionality. Such online database creator apps serve the gap between IT professionals (who can manage such a stack themselves) and people who would not create databases at all anyway. In other words, they provide a low-code way of doing database administration. As the concept of low-code development in general continues to evolve, some of the brands that began as online database creator apps are evolving into low-code development platforms for both the databases and the custom apps that use them. Airtable Bubble Caspio Coda.io Microsoft Access web apps plus SharePoint Oracle Application Express aka APEX Quickbase WaveMaker Rapid ZohoCreator

    Read more →
  • Color space

    Color space

    A color space is a specific organization of colors. In combination with color profiling supported by various physical devices, it supports reproducible representations of color – whether such representation entails an analog or a digital representation. A color space may be arbitrary, i.e. with physically realized colors assigned to a set of physical color swatches with corresponding assigned color names (including discrete numbers in – for example – the Pantone collection), or structured with mathematical rigor (as with the NCS System, Adobe RGB and sRGB). A "color space" is a useful conceptual tool for understanding the color capabilities of a particular device or digital file. When trying to reproduce color on another device, color spaces can show whether shadow/highlight detail and color saturation can be retained, and by how much either will be compromised. A "color model" is an abstract mathematical model describing the way colors can be represented as tuples of numbers (e.g. triples in RGB or quadruples in CMYK); however, a color model with no associated mapping function to an absolute color space is a more or less arbitrary color system with no connection to any globally understood system of color interpretation. Adding a specific mapping function between a color model and a reference color space establishes within the reference color space a definite "footprint", known as a gamut, and for a given color model, this defines a color space. For example, Adobe RGB and sRGB are two different absolute color spaces, both based on the RGB color model. When defining a color space, the usual reference standard is the CIELAB or CIEXYZ color spaces, which were specifically designed to encompass all colors the average human can see. Since "color space" identifies a particular combination of the color model and the mapping function, the word is often used informally to identify a color model. However, even though identifying a color space automatically identifies the associated color model, this usage is incorrect in a strict sense. For example, although several specific color spaces are based on the RGB color model, there is no such thing as the singular RGB color space. == History == In 1802, Thomas Young postulated the existence of three types of photoreceptors (now known as cone cells) in the eye, each of which was sensitive to a particular range of visible light. Hermann von Helmholtz developed the Young–Helmholtz theory further in 1850: that the three types of cone photoreceptors could be classified as short-preferring (blue), middle-preferring (green), and long-preferring (red), according to their response to the wavelengths of light striking the retina. The relative strengths of the signals detected by the three types of cones are interpreted by the brain as a visible color. But it is not clear that they thought of colors as being points in color space. The color-space concept was likely due to Hermann Grassmann, who developed it in two stages. First, he developed the idea of vector space, which allowed the algebraic representation of geometric concepts in n-dimensional space. Fearnley-Sander (1979) describes Grassmann's foundation of linear algebra as follows: The definition of a linear space (vector space)... became widely known around 1920, when Hermann Weyl and others published formal definitions. In fact, such a definition had been given thirty years previously by Peano, who was thoroughly acquainted with Grassmann's mathematical work. Grassmann did not put down a formal definition—the language was not available—but there is no doubt that he had the concept. With this conceptual background, in 1853, Grassmann published a theory of how colors mix; it and its three color laws are still taught, as Grassmann's law. As noted first by Grassmann... the light set has the structure of a cone in the infinite-dimensional linear space. As a result, a quotient set (with respect to metamerism) of the light cone inherits the conical structure, which allows color to be represented as a convex cone in the 3- D linear space, which is referred to as the color cone. == Examples == Colors can be created in printing with color spaces based on the CMYK color model, using the subtractive primary colors of pigment (cyan, magenta, yellow, and key [black]). To create a three-dimensional representation of a given color space, we can assign the amount of magenta color to the representation's X axis, the amount of cyan to its Y axis, and the amount of yellow to its Z axis. The resulting 3-D space provides a unique position for every possible color that can be created by combining those three pigments. Colors can be created on computer monitors with color spaces based on the RGB color model, using the additive primary colors (red, green, and blue). A three-dimensional representation would assign each of the three colors to the X, Y, and Z axes. Colors generated on a given monitor will be limited by the reproduction medium, such as the phosphor (in a CRT monitor) or filters and backlight (LCD monitor). Another way of creating colors on a monitor is with an HSL or HSV color model, based on hue, saturation, brightness (value/lightness). With such a model, the variables are assigned to cylindrical coordinates. Many color spaces can be represented as three-dimensional values in this manner, but some have more, or fewer dimensions, and some, such as Pantone, cannot be represented in this way at all. == Conversion == Color space conversion is the translation of the representation of a color from one basis to another. This typically occurs in the context of converting an image that is represented in one color space to another color space, the goal being to make the translated image look as similar as possible to the original. == RGB density == The RGB color model is implemented in different ways, depending on the capabilities of the system used. The most common incarnation in general use as of 2021 is the 24-bit implementation, with 8 bits, or 256 discrete levels of color per channel. Any color space based on such a 24-bit RGB model is thus limited to a range of 256×256×256 ≈ 16.7 million colors. Some implementations use 16 bits per component for 48 bits total, resulting in the same gamut with a larger number of distinct colors. This is especially important when working with wide-gamut color spaces (where most of the more common colors are located relatively close together), or when a large number of digital filtering algorithms are used consecutively. The same principle applies for any color space based on the same color model, but implemented at different bit depths. == Lists == CIE 1931 XYZ color space was one of the first attempts to produce a color space based on measurements of human color perception (earlier efforts were by James Clerk Maxwell, König & Dieterici, and Abney at Imperial College) and it is the basis for almost all other color spaces. The CIERGB color space is a linearly-related companion of CIE XYZ. Additional derivatives of CIE XYZ include the CIELUV, CIEUVW, and CIELAB. === Generic === RGB uses additive color mixing, because it describes what kind of light needs to be emitted to produce a given color. RGB stores individual values for red, green and blue. RGBA is RGB with an additional channel, alpha, to indicate transparency. Common color spaces based on the RGB model include sRGB, Adobe RGB, ProPhoto RGB, scRGB, and CIE RGB. CMYK uses subtractive color mixing used in the printing process, because it describes what kind of inks need to be applied so the light reflected from the substrate and through the inks produces a given color. One starts with a white substrate (canvas, page, etc.), and uses ink to subtract color from white to create an image. CMYK stores ink values for cyan, magenta, yellow and black. There are many CMYK color spaces for different sets of inks, substrates, and press characteristics (which change the dot gain or transfer function for each ink and thus change the appearance). YIQ was formerly used in NTSC (North America, Japan and elsewhere) television broadcasts for historical reasons. This system stores a luma value roughly analogous to (and sometimes incorrectly identified as) luminance, along with two chroma values as approximate representations of the relative amounts of blue and red in the color. It is similar to the YUV scheme used in most video capture systems and in PAL (Australia, Europe, except France, which uses SECAM) television, except that the YIQ color space is rotated 33° with respect to the YUV color space and the color axes are swapped. The YDbDr scheme used by SECAM television is rotated in another way. YPbPr is a scaled version of YUV. It is most commonly seen in its digital form, YCbCr, used widely in video and image compression schemes such as MPEG and JPEG. xvYCC is an international digital video color space standard published by the IEC (IEC 61966-2-4). It is based on the ITU BT.601 and BT.709

    Read more →
  • GeoNetwork opensource

    GeoNetwork opensource

    The GeoNetwork opensource (GNOS) project is a free and open source (FOSS) cataloging application for spatially referenced resources. It is a catalog of location-oriented information. == Outline == It is a standardized and decentralized spatial information management environment designed to enable access to geo-referenced databases, cartographic products and related metadata from a variety of sources, enhancing the spatial information exchange and sharing between organizations and their audience, using the capacities of the internet. Using the Z39.50 protocol it both accesses remote catalogs and makes its data available to other catalog services. As of 2007, OGC Web Catalog Service are being implemented. Maps, including those derived from satellite imagery, are effective communicational tools and play an important role in the work of decision makers (e.g., sustainable development planners and humanitarian and emergency managers) in need of quick, reliable and up-to-date user-friendly cartographic products as a basis for action and to better plan and monitor their activities; GIS experts in need of exchanging consistent and updated geographical data; and spatial analysts in need of multidisciplinary data to perform preliminary geographical analysis and make reliable forecasts. == Deployment == The software has been deployed to various organizations, the first being FAO GeoNetwork and WFP VAM-SIE-GeoNetwork, both at their headquarters in Rome, Italy. Furthermore, the WHO, CGIAR, BRGM, ESA, FGDC and the Global Change Information and Research Centre (GCIRC) of China are working on GeoNetwork opensource implementations as their spatial information management capacity. It is used for several risk information systems, in particular in the Gambia. Several related tools are packaged with GeoNetwork, including GeoServer. GeoServer stores geographical data, while GeoNetwork catalogs collections of such data.

    Read more →
  • Gcore

    Gcore

    Gcore is an edge AI, cloud, network, and security company headquartered in Luxembourg. Founded in 2014, the company provides low-latency services to industries including finance, healthcare, manufacturing, gaming, media and telecommunications internationally. As of March 2024, its global network includes over 180 Points of Presence (PoPs) across six continents. == History == Gcore was founded in 2014 in Luxembourg. The company built its own content delivery network, originally designed for the needs of the gaming industry. In 2016, Gcore's infrastructure expanded to multiple regions that were underserved by hyperscale cloud providers. In 2020, the company formed partnerships with Intel and Equinix. In 2022, Gcore launched the European AI Cloud, providing access to infrastructure for machine learning tasks. In March 2024, Gcore announced the acquisition of a web application and API protection (WAAP) solution from StackPath. In April 2024, Gcore received a commendation in the Industry Innovation category at the NVIDIA Partner Network Awards EMEA for developing the first speech-to-text technology for Luxembourgish, using the LuxemBERT AI model. In May 2024, Philipp Rösler, former vice-chancellor of Germany and federal minister of health joined the Gcore board. In July 2024, Gcore raised $60 million in a Series A funding round, marking the company's first external investment since its founding. In August 2024, Gcore was recognized as a Major Player in the IDC MarketScape report for European public cloud Infrastructure (IaaS) 2024 by IDC, the global market intelligence firm. In May 2025, Feiyu Xu became a member of the Gcore advisory board. == Network infrastructure == According to the company's website, Gcore has network locations in six continents: Europe, North America, Asia, South America, Africa, and Australia with over 14,000 peering partners and a network capacity exceeding 200 Tbps. According to a 2025 review by Geekflare, Gcore's CDN achieved an average global response time of around 30 milliseconds. Gcore offers AI cloud clusters, including a generative AI cluster with Nvidia GPUs in Luxembourg and additional sites in the Netherlands and Wales, as part of its European AI infrastructure. == Products and services == Gcore offers a range of services, including content delivery network (CDN), cloud computing,virtual machines, bare-metal servers, object storage AI infrastructure and inference, Kubernetes, video streaming, DDoS mitigation, web application and API protection (WAAP), Domain Name System (DNS). Gcore provides AI services and GPU cloud infrastructure to support model development, training, fine-tuning, and inference. In January 2025, the company introduced Everywhere Inference, a serverless inference solution that enables AI model deployment. == Controversies == Correctiv and Tageszeitung reported that Gcore supported the distribution of the TV network RT until April 2023, which has been under sanctions by the EU since March 2022. However, Gcore denies these allegations. == Collaborations == In 2024, Gcore and Qareeb Data Centres, a data center provider in the Middle East, launched a collaboration to integrate Gcore's AI, cloud and edge services across data centers in multiple Middle Eastern countries. In June 2025, Gcore joined the SmartSpires initiative, a €3.1 million smart city project co-funded by the Connecting Europe Facility. The three-year programme is coordinated by a public–private consortium including 5SKYE, the Luxembourg Institute of Science and Technology (LIST), Orange Luxembourg, and Gcore. The project aims to transform the Belval campus into a smart city by deploying 5G-enabled smart towers that integrate edge computing, artificial intelligence and IoT services. Within the consortium, Gcore acts as project coordinator and is responsible for the deployment of the edge infrastructure.

    Read more →
  • Frame grabber

    Frame grabber

    A frame grabber is an electronic device that captures (i.e., "grabs") individual, digital still frames from an analog video signal or a digital video stream. It is usually employed as a component of a computer vision system, in which video frames are captured in digital form and then displayed, stored, transmitted, analyzed, or combinations of these. Historically, frame grabber expansion cards were the predominant way to interface cameras to PCs. Other interface methods have emerged since then, with frame grabbers (and in some cases, cameras with built-in frame grabbers) connecting to computers via interfaces such as USB, Ethernet and IEEE 1394 ("FireWire"). Early frame grabbers typically had only enough memory to store a single digitized video frame, whereas many modern frame grabbers can store multiple frames. Modern frame grabbers often are able to perform functions beyond capturing a single video input. For example, some devices capture audio in addition to video, and some devices provide, and concurrently capture frames from multiple video inputs. Other operations may be performed as well, such as deinterlacing, text or graphics overlay, image transformations (e.g., resizing, rotation, mirroring), and conversion to JPEG or other compressed image formats. To satisfy the technological demands of applications such as radar acquisition, manufacturing and remote guidance, some frame grabbers can capture images at high frame rates, high resolutions, or both. == Circuitry == Analog frame grabbers, which accept and process analog video signals, include these circuits: Input signal conditioner that buffers the analog video input signal to protect downstream circuitry Video decoder that converts SD analog video (e.g., NTSC, SECAM, PAL) or HD analog video (e.g., AHD, HD-TVI, HD-CVI) to a digital format Digital frame grabbers, which accept and process digital video streams, include these circuits: Digital video decoder that interfaces to and converts a specific type of digital video source, such as Camera Link, CoaXPress, DVI, GigE Vision, LVDS, or SDI Circuitry common to both analog and digital frame grabbers: Memory for storing the acquired image (i.e., a frame buffer) A bus interface through which a processor can control the acquisition and access the data General purpose I/O for triggering image acquisition or controlling external equipment == Applications == === Healthcare === Frame grabbers are used in medicine for many applications, including telenursing and remote guidance. In situations where an expert at another location needs to be consulted, frame grabbers capture the image or video from the appropriate medical equipment, so it can be sent digitally to the distant expert. === Manufacturing === "Pick and place" machines are often used to mount electronic components on circuit boards during the circuit board assembly process. Such machines use one or more cameras to monitor the robotics that places the components. Each camera is paired with a frame grabber that digitizes the analog video, thus converting the video to a form that can be processed by the machine software. === Network security === Frame grabbers may be used in security applications. For example, when a potential breach of security is detected, a frame grabber captures an image or a sequence of images, and then the images are transmitted across a digital network where they are recorded and viewed by security personnel. === Personal use === In recent years with the rise of personal video recorders like camcorders, mobile phones, etc. video and photo applications have gained ascending prominence. Frame grabbing is becoming very popular on these devices. === Astronomy & astrophotography === Amateur astronomers and astrophotographers use frame grabbers when using analog "low light" cameras for live image display and internet video broadcasting of celestial objects. Frame grabbers are essential to connect the analog cameras used in this application to the computers that store or process the images.

    Read more →
  • Sunrise Calendar

    Sunrise Calendar

    Sunrise is a discontinued electronic calendar application for mobile and desktop. The service was launched in 2013 by designers Pierre Valade and Jeremy Le Van. In October 2015, Microsoft announced that they had merged the Sunrise Calendar team into the larger Microsoft Outlook team where they will work closely with the Microsoft Outlook Mobile service. == History == The first iteration of Sunrise launched in 2012 and was a daily email digest of appointments, events and birthdays. Sunrise was launched initially as an iPhone application on February 19, 2013. In June 2013, Sunrise raised $2.2 million (~$2.91 million in 2024) in venture funding from Resolute.vc, NextView Ventures, Lerer Hippeau Ventures, SV Angel, and other angel investment firms like Loïc Le Meur, Dave Morin, Fabrice Grinda. In May 2014, Sunrise launched on Android as well as on the web via a web application. In July 2014, Sunrise announced it had raised $6 million (~$7.81 million in 2024) Series A from Balderton Capital. Bernard Liautaud joined the board. On February 11, 2015, Sunrise Atelier, Inc. was acquired by Microsoft for US$100 million (~$129 million in 2024). On October 28, 2015, Microsoft announced that Sunrise would be discontinued, and its functionality merged into Outlook Mobile. Microsoft later stated that the app would permanently cease functioning on August 31, 2016, but the shutdown was delayed to September 13, 2016, to coincide with an update to Outlook Mobile that incorporates aspects of Sunrise into its calendar interface. == Features == Sunrise allowed users to connect with Google Calendar, iCloud calendar and with Exchange Server. The following third-party services featured integration with Sunrise: Foursquare, GitHub, TripIt, Asana, Evernote, Google Tasks, Trello, Songkick, and Wunderlist. As a web app, users could sign-in and use Sunrise in a web browser, with no downloads required. A native Sunrise app could also be downloaded for OS X 10.9 and later, iOS 8.0 and later (both iPhone and iPad) as well as Android phones and tablets. In May 2015, Sunrise launched Meet, a keyboard for Android and iOS that lets users select available time slots in their calendar to schedule one-to-ones.

    Read more →
  • C-RAN

    C-RAN

    C-RAN (Cloud-RAN), also referred to as Centralized-RAN, is an architecture for cellular networks. C-RAN is a centralized, cloud computing-based architecture for radio access networks that supports 2G, 3G, 4G, 5G and future wireless communication standards. Its name comes from the four 'C's in the main characteristics of C-RAN system, "Clean, Centralized processing, Collaborative radio, and a real-time Cloud Radio Access Network". == Background == Traditional cellular, or Radio Access Networks (RAN), consist of many stand-alone base stations (BTS). Each BTS covers a small area, whereas a group BTS provides coverage over a continuous area. Each BTS processes and transmits its own signal to and from the mobile terminal, and forwards the data payload to and from the mobile terminal and out to the core network via the backhaul. Each BTS has its own cooling, back haul transportation, backup battery, monitoring system, and so on. Because of limited spectral resources, network operators 'reuse' the frequency among different base stations, which can cause interference between neighboring cells. There are several limitations in the traditional cellular architecture. First, each BTS is costly to build and operate. Moore's law helps reduce the size and power of an electrical system, but the supporting facilities of the BTS are not improved quite as well. Second, when more BTS are added to a system to improve its capacity, interference among BTS is more severe as BTS are closer to each other and more of them are using the same frequency. Third, because users are mobile, the traffic of each BTS fluctuates (called 'tide effect'), and as a result, the average utilization rate of individual BTS is pretty low. However, these processing resources cannot be shared with other BTS. Therefore, all BTS are designed to handle the maximum traffic, not average traffic, resulting in a waste of processing resources and power at idle times. == Evolution of base station architecture == === All-in-one macro base station === In the 1G and 2G cellular networks, base stations had an all-in-one architecture. Analog, digital, and power functions were housed in a single cabinet as large as a refrigerator. Usually the base station cabinet was placed in a dedicated room along with all necessary supporting facilitates such as power, backup battery, air conditioning, environment surveillance, and backhaul transmission equipment. The RF signal is generated by the base station RF unit and propagates through pairs of RF cables up to the antennas on the top of a base station tower or other mounting points. This all-in-one architecture was mostly found in macro cell deployments. === Distributed base station === For 3G, a distributed base station architecture was introduced by Ericsson, Nokia, Huawei, and other leading telecom equipment vendors. In this architecture the radio function unit, also known as the remote radio head (RRH), is separated from the digital function unit, or baseband unit (BBU) by fiber. Digital baseband signals are carried over fiber, using the Open Base Station Architecture Initiative (OBSAI) or Common Public Radio Interface (CPRI) standard. The RRH can be installed on the top of tower close to the antenna, reducing the loss compared to the traditional base station where the RF signal has to travel through a long cable from the base station cabinet to the antenna at the top of the tower. The fiber link between RRH and BBU also allows more flexibility in network planning and deployment as they can be placed a few hundred meters or a few kilometers away. Most modern base stations now use this decoupled architecture. === C-RAN/Cloud-RAN === C-RAN may be viewed as an architectural evolution of the above distributed base station system. It takes advantage of many technological advances in wireless, optical and IT communications systems. For example, it uses the latest CPRI standard, low cost Coarse or Dense Wavelength Division Multiplexing (CWDM/ DWDM) technology, and mmWave to allow transmission of baseband signal over long distance thus achieving large scale centralised base station deployment. It applies recent Data Centre Network technology to allow a low cost, high reliability, low latency and high bandwidth interconnect network in the BBU pool. It utilizes open platforms and real-time virtualization technology rooted in cloud computing to achieve dynamic shared resource allocation and support multi-vendor, multi-technology environments. == Architecture overview == C-RAN architecture has the following characteristics that are distinct from other cellular architectures: Large scale centralized deployment: Allows many RRHs to connect to a centralized BBU pool. The maximum distance can be 20km in fiber link for 4G (LTE/LTE-A) systems, and even longer distances (40~80km) for 3G (WCDMA/TD-SCDMA) and 2G (GSM/CDMA) systems. Native support to Collaborative Radio technologies: Any BBU can talk with any other BBU within the BBU pool with very high bandwidth (10 Gbit/s and above) and low latency (10 μs level). This is enabled by the interconnection of BBUs in the pool. This is one major difference from BBU Hotelling, or base station Hotelling; in the latter case, the BBUs of different base stations are simply stacked together and have no direct link between them to allow physical layer co-ordination. Real-time virtualization capability based on open platform: This is different from traditional base stations built on proprietary hardware, where the software and hardware are close-sourced and provided by single vendors. In contrast, a C-RAN BBU pool is built on open hardware, like x86/ARM CPU based servers, and interface cards that handle fiber links to RRHs and inter-connections in the pool. Real-time virtualization ensures that resources in the pool can be allocated dynamically to base station software stacks, say 4G/3G/2G function modules from different vendors, according to network load. However, to satisfy the strict timing requirements of wireless communication systems, the real-time performance for C-RAN is at the level of tens of microseconds, which is two orders of magnitude better than the millisecond level 'real-time' performance usually seen in Cloud Computing environments. == Similar architecture and systems == KT, a telecom operator in the Republic of Korea, introduced a Cloud Computing Center (CCC) system in their 3G (WCDMA/HSPA) and 4G (LTE/LTE-A) network in 2011 and 2012. The concept of CCC is basically the same as C-RAN. SK Telecom has also deployed Smart Cloud Access Network (SCAN) and Advanced-SCAN in their 4G (LTE/LTE-A) network in Korea no later than 2012. In 2014, Airvana (now CommScope) introduced OneCell, a C-RAN-based small cell system designed for enterprises and public spaces. == Competing architectures in cellular network evolution == === All-in-one BTS === One major alternative solution that is addressing similar challenges of RAN, is the small size, all-in-one outdoor BTS. Thanks to the achievements in the semiconductor industry, all the functionality of a BTS, including RF, baseband processing, MAC processing and package level processing, can now be implemented in a volume of <50 liters. This makes the system small and weatherproof, reduces the difficulty of BTS site choice and construction, eliminates the air conditioning requirement, and thus reduces operational costs. However, because each BTS is still working on its own, it cannot readily make use of the collaboration algorithms to reduce the interference between neighboring BTSs. It is also relatively hard to upgrade or repair because the all-in-one BTS units are usually mounted near the antenna. More processing units in less-protected environments also implies a higher failure rate compared to C-RAN, which only has the RRU deployed outdoors. The advantage of Cloud RAN lies in its ability to implement LTE-Advanced features such as Coordinated MultiPoint (CoMP) with very low latency between multiple radio heads. However, the economic benefit of improvements such as CoMP can be negated by the higher backhaul costs for some operators. === Small cell === The main competition between small cell and C-RAN occurs in two deployment scenarios: outdoor hotspot coverage and indoor coverage. == Academic research and publications == As one of the promising evolution paths for future cellular network architecture, C-RAN has attracted high academic research interest. Meanwhile, because the native support of cooperative radio capability built into the C-RAN architecture, it also enables many advanced algorithms that were hard to implement in cellular networks, including Cooperative Multi-Point Transmission/Receiving, Network Coding, etc. In October 2011, Wireless World Research Forum 27 was hosted in Germany, when China Mobile was invited to give a C-RAN presentation. In August 2012, IEEE C-RAN 2012 workshop was hosted in Kunming, China. CRC Press published a book, "Green Communications: Theore

    Read more →
  • Apache Kudu

    Apache Kudu

    Apache Kudu is a free and open source column-oriented data store of the Apache Hadoop ecosystem. It is compatible with most of the data processing frameworks in the Hadoop environment. It provides completeness to Hadoop's storage layer to enable fast analytics on fast data. The open source project to build Apache Kudu began as internal project at Cloudera. The first version Apache Kudu 1.0 was released 19 September 2016. == Comparison with other storage engines == Kudu was designed and optimized for OLAP workloads. Like HBase, it is a real-time store that supports key-indexed record lookup and mutation. Kudu differs from HBase since Kudu's datamodel is a more traditional relational model, while HBase is schemaless. Kudu's "on-disk representation is truly columnar and follows an entirely different storage design than HBase/Bigtable".

    Read more →
  • List of artificial intelligence journals

    List of artificial intelligence journals

    This is a list of notable peer-reviewed academic journals that publish research in the field of artificial intelligence (AI), including areas such as machine learning, computer vision, natural language processing, robotics, and intelligent systems. == General artificial intelligence == Artificial Intelligence (journal) – Elsevier Journal of Artificial Intelligence Research (JAIR) – AI Access Foundation Knowledge-Based Systems – Elsevier == Machine learning == Data Mining and Knowledge Discovery – Springer Machine Learning (journal) – Springer Journal of Machine Learning Research – Microtome Pattern Recognition (journal) – Elsevier Neural Networks (journal) – Elsevier Neural Computation (journal) – MIT Press Neurocomputing (journal) - Elsevier == Deep learning and neural computation == IEEE Transactions on Evolutionary Computation – IEEE IEEE Transactions on Neural Networks and Learning Systems – IEEE Nature Machine Intelligence – Springer Nature == Computer vision == International Journal of Computer Vision – Springer IEEE Transactions on Pattern Analysis and Machine Intelligence – IEEE Machine Vision and Applications – Springer == Natural language processing == Computational Linguistics (journal) – MIT Press Natural Language Processing Transactions of the Association for Computational Linguistics – ACL == Robotics and intelligent systems == IEEE Transactions on Robotics – IEEE Autonomous Robots – Springer Journal of Intelligent & Robotic Systems – Springer == Interdisciplinary and ethics in AI == AI & Society – Springer Artificial Life – MIT Press Philosophy & Technology – Springer Minds and Machines – Springer

    Read more →
  • Directional cubic convolution interpolation

    Directional cubic convolution interpolation

    Directional cubic convolution interpolation (DCCI) is an edge-directed image scaling algorithm created by Dengwen Zhou and Xiaoliu Shen. By taking into account the edges in an image, this scaling algorithm reduces artifacts common to other image scaling algorithms. For example, staircase artifacts on diagonal lines and curves are eliminated. The algorithm resizes an image to 2x its original dimensions, minus 1.

    Read more →
  • FedRAMP

    FedRAMP

    The Federal Risk and Authorization Management Program (FedRAMP) is a United States federal government-wide compliance program that provides a standardized approach to security assessment, authorization, and continuous monitoring for cloud products and services. The US government describes FedRAMP as FISMA for the cloud. == Overview == The FedRAMP PMO mission is to promote the adoption of secure cloud services across the federal government by providing a standardized approach to security and risk assessment. Per the OMB memorandum, any cloud services that hold federal data must be FedRAMP authorized. FedRAMP prescribes the security requirements and processes that cloud service providers must follow in order for the government to use their service. There are two ways to authorize a cloud service through FedRAMP: a Joint Authorization Board (JAB) provisional authorization (P-ATO), and through individual agencies. FedRAMP provides accreditation for cloud services for the various cloud offering models which are Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and Software as a Service, (SaaS). == History == In 2011, the Office of Management and Budget (OMB) released a memorandum establishing FedRAMP "to provide a cost-effective, risk-based approach for the adoption and use of cloud services to Executive departments and agencies." The General Services Administration (GSA) established the FedRAMP Program Management Office (PMO) in June 2012. Before the introduction of FedRAMP, individual federal agencies managed their own assessment methodologies following guidance set by the Federal Information Security Management Act of 2002. == Governance and applicable laws == FedRAMP is governed by different Executive Branch entities that collaborate to develop, manage, and operate the program. These entities include: The Office of Management and Budget (OMB): The governing body that issued the FedRAMP policy memo, which defines the key requirements and capabilities of the program The Joint Authorization Board (JAB): The primary governance and decision-making body for FedRAMP comprises the chief information officers (CIOs) from the Department of Homeland Security (DHS), General Services Administration (GSA), and Department of Defense (DOD) The National Institute of Standards and Technology (NIST): Advises FedRAMP on FISMA compliance requirements and assists in developing the standards for the accreditation of independent 3PAOs The Department of Homeland Security (DHS): Manages the FedRAMP continuous monitoring strategy including data feed criteria, reporting structure, threat notification coordination, and incident response The Federal Chief Information Officers (CIO) Council: Disseminates FedRAMP information to Federal CIOs and other representatives through cross-agency communications and events The FedRAMP PMO: Established within GSA and responsible for the development of the FedRAMP program, including the management of day-to-day operations There are several laws, mandates, and policies that are foundational to FedRAMP. FISMA–the Federal Information Security Modernization Act–requires that agencies authorize the information systems that they use. The US government describes FedRAMP as FISMA for the cloud. The FedRAMP Policy Memo requires federal agencies to use FedRAMP when assessing, authorizing, and continuously monitoring cloud services in order to aid agencies in the authorization process as well as save government resources and eliminate duplicative efforts. FedRAMP's security baselines are derived from NIST SP 800-53 (as revised) with a set of control enhancements that pertain to the unique security requirements of cloud computing. == Third-party assessment organizations == Third-party assessment organizations (3PAOs) play a critical role in the FedRAMP security assessment process, as they are the independent assessment organizations that verify cloud providers' security implementations and provide the overall risk posture of a cloud environment for a security authorization decision. Accredited by the American Association for Laboratory Accreditation (A2LA), these assessment organizations must demonstrate independence and the technical competence required to test security implementations and collect representative evidence. == FedRAMP Marketplace == The FedRAMP Marketplace provides a searchable, sortable database of Cloud Service Offerings (CSOs) that have achieved a FedRAMP designation. 3PAOs, accredited auditors that can perform the FedRAMP assessment, are listed within the Marketplace. The FedRAMP Marketplace is maintained by the FedRAMP Program Management Office (PMO). == Security and authorization concerns == A 2026 ProPublica investigation found that FedRAMP entered into a partnership with Microsoft despite considerable concerns about the security of its cloud technology.

    Read more →