AI For Economics Students

AI For Economics Students — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Agent Ruby

Agent Ruby (1998–2002) by Lynn Hershman Leeson is an interactive, multiuser work using artificial intelligence. == Description == On Agent Ruby's website, "Agent Ruby's Edream Portal," a female face moves her eyes and lips. Ruby, named from Hershman Leeson's own film, Teknolust, answers questions and often responds that she needs a better algorithm to answer questions not within her database. The work, created with AI, explores relationships between real and virtual worlds. Hershman Leeson had created an earlier version of Ruby, CyberRoberta, which was a custom-made doll with webcam eyes that interacted with the internet. The work in a gallery provides a screen and a sign inviting gallery-goers to "Chat with Ruby." == Artificial intelligence == In 2015 when Agent Ruby was exhibited at the gallery Modern Art Oxford, a review in Aesthetica Magazine described it as an artificial intelligence agent. A review in New Scientist noted that "Ruby is a fast learner, but perhaps not a natural conversationalist." A 2024 list of "25 Essential AI Artworks" published by ARTnews wrote that while "Agent Ruby's capabilities seem limited by today's standards," it was extensive for its day. == Publications and exhibitions == Agent Ruby was commissioned and displayed at the San Francisco Museum of Modern Art, Modern Art Oxford, and the ZKM Center for Art and Media in Karlsruhe, Germany. The San Francisco Museum of Modern Art (SFMOMA) presented Lynn Hershman Leeson: The Agent Ruby Files, March 30 through June 2, 2013 which presented the project server's archive of user conversations over the 12 years of exhibitions.
Read more →
Event condition action

Event condition action (ECA) is a short-cut for referring to the structure of active rules in event-driven architecture and active database systems. Such a rule traditionally consisted of three parts: The event part specifies the signal that triggers the invocation of the rule The condition part is a logical test that, if satisfied or evaluates to true, causes the action to be carried out The action part consists of updates or invocations on the local data This structure was used by the early research in active databases which started to use the term ECA. Current state of the art ECA rule engines use many variations on rule structure. Also other features not considered by the early research is introduced, such as strategies for event selection into the event part. In a memory-based rule engine, the condition could be some tests on local data and actions could be updates to object attributes. In a database system, the condition could simply be a query to the database, with the result set (if not null) being passed to the action part for changes to the database. In either case, actions could also be calls to external programs or remote procedures. Note that for database usage, updates to the database are regarded as internal events. As a consequence, the execution of the action part of an active rule can match the event part of the same or another active rule, thus triggering it. The equivalent in a memory-based rule engine would be to invoke an external method that caused an external event to trigger another ECA rule. ECA rules can also be used in rule engines that use variants of the Rete algorithm for rule processing. == ECA rule engines == Rulecore Concurrent Rules Apart Database Detect Invocation Rules ConceptBase ECArules
Read more →
Digistar

Digistar is the first computer graphics-based planetarium projection and content system. It was designed by Evans & Sutherland and released in 1983. The technology originally focused on accurate and high quality display of stars, including for the first time showing stars from points of view other than Earth's surface, travelling through the stars, and accurately showing celestial bodies from different times in the past and future. Beginning with the Digistar 3 the system now projects full-dome video. == Projector == Unlike modern full-dome systems, which use LCD, DLP, SXRD, or laser projection technology, the Digistar projection system was designed for projecting bright pinpoints of light representing stars. This was accomplished using a calligraphic display, a form of vector graphics, rather than raster graphics. The heart of the Digistar projector is a large cathode-ray tube (CRT). A phosphor plate is mounted atop the tube, and light is then dispersed by a large lens with a 160 degree field of view to cover the planetarium dome. The original lens bore the inscription: "August 1979 mfg. by Lincoln Optical Corp., L.A., CA for Evans and Sutherland Computer Corp., SLC, UT, Digital planetarium CRT projection lens, 43mm, f2.8, 160 degree field of view". The coordinates of the stars and wire-frame models to be displayed by the projector were stored in computer RAM in a display list. The display would read each set of coordinates in turn and drive the CRT's electron beam directly to those coordinates. If the electron beam was enabled while being moved a line would be painted on the phosphor plate. Otherwise, the electron beam would be enabled once at its destination and a star would be painted. Once all coordinates in the display list had been processed, the display would repeat from the top of the display list. Thus, the shorter the display list the more frequently the electron beam would refresh the charge on a given point on the phosphor plate, making the projection of the points brighter. In this way, the stars projected by Digistar were substantially brighter than could be achieved using a raster display, which has to touch every point on the phosphor plate before repeating. Likewise, the calligraphic technology allowed Digistar to have a darker black-level than full-dome projectors, since the portions of the phosphor plate representing dark sky were never hit by the electron beam. As it is only one tube, with no pixelated color filter screen, the Digistar projector is monochromatic. The Digistar projects a bright, phosphorescent green, though many (including both visitors and planetarians) report they cannot distinguish between this green and white. Additionally, unlike a raster display, the calligraphic display is not discretized into pixels, so the displayed stars were a more realistic single spot of light, without the blocky or ropy artifacts that are hard to avoid with raster graphics. Due to the use of vector graphics, as opposed to raster imaging, the Digistar does not have the resolution issues that many full-dome systems have. Thanks to this, and the brightness of the CRT, only one projector is needed to project on the entire dome, whereas most full-dome systems require up to six raster projectors, depending on dome size. The projector in the original Digistar was housed in a square pyramid-shaped sheathing. When powered on, the four sides at the tip of the pyramid would recede into the housing, exposing the lens and appearing as a cut-off pyramid. As Digistar II was being developed, many planetaria were sold Digistar LEA projectors. The LEA, called Digistar 1.5 by many users, was effectively a prototype of the D2 projector, compatible with Digistar and upgradable to Digistar II. There are no significant differences in performance between the LEA and the true D2. == History == Digistar was the brainchild of Stephen McAllister and Brent Watson, both of whom were long-time amateur astronomers and computer graphics engineers. In 1977, E&S had been consulting with Johnson Space Center regarding training simulators for astronauts. McAllister had been writing proof-of-concept software for this consultation and in summer 1977 entered the data for 400 bright stars and wrote the software to display them. Steve and Brent both originally saw the system's purpose as celestial navigation training. Brent, who had until recently worked at Hansen planetarium, asked his planetarium coworkers what they thought of a potential digital planetarium system, and then Steve and Brent both targeted the system toward planetaria. The primary goal of the planetarium system was to use computer graphics to overcome the limitation of traditional star ball technology that only allowed display of star fields from the point of view of Earth's surface. By using computer graphics the stars could be displayed from viewpoints in space, including simulating the appearance of space flight. Likewise, planets and moons within the Solar System could be displayed accurately for any time in history, from any point of view. The system used the location of real stars from the Yale Bright Star Catalogue, as well as random stars. A laboratory prototype of Digistar was used to generate the star fields and tactical displays in the 1982 science fiction film Star Trek II: The Wrath of Khan. Filming was done directly from the Digistar display in the lab. ILM projected the effort would take two weeks, but in fact it took from late November 1981 until mid-February 1982. The last shot recorded was what became the first entirely computer generated feature film sequence. It was the opening scene of the film, a rotating forward translation through a star field that lasted 3.5 minutes. It was recorded in one take, at a rate of one frame every 3.5 seconds, taking four hours for the shoot. The Digistar team members are credited in the film. After prototyping in labs at Evans and Sutherland the team repeatedly used Salt Lake City's Hansen planetarium to beta test the system at the planetarium at night. The Digistar team performed one week of shows at the planetarium as a fund raiser to benefit the planetarium. The company also later gave the planetarium an improved prototype Digistar to replace "Jake", the planetarium's aging Spitz planetarium projector. The first customer installation was to the newly constructed Universe Planetarium at the Science Museum of Virginia in 1983, the largest planetarium dome in the world at the time, for $595,000. By September 1986 there were four installed Digistars. Even at this point the long-term success of the product was very much in doubt, but as of 2019 Digistar has an installed base of over 550 planetaria. === Versions === Digistar (1983) Digistar II (1995) Digistar 3 (2002) Digistar 4 (2010?) Digistar 5 (2012) Digistar 6 (2016) Digistar 7 (2021) == Hardware == Digistar was driven by a VAX-11/780 minicomputer, with custom graphics hardware related to the E&S Picture System 2. Later versions of Digistar 1 used a DEC MicroVAX 2, driving a custom version of a PS/300. The original Digistar and Digistar 2 had a physical control panel that was used for running the star shows. This control panel was approximately 3' x 4' and contained a keyboard, a 6 DOF joystick, and a large array of back-lit buttons. One button that was used for moving the viewpoint forward in space was labeled "Boldly Go". Later iterations of Digistar replaced the physical control panel with a common graphical user interface. Digistar 3 was the first Digistar system to offer full-dome video in 2002, using six projectors. Digistar 4 was able to cover the dome using only two projectors. == System limitations == Though technologically advanced in its day, and the closest system to true full-dome video at the time of its release, the original Digistar and Digistar 2 are limited to only projecting dots and lines—meaning only wireframe models can be projected. To compensate for this, the projector is capable of defocusing specific models, blurring lines and dots together. An example of this is in the Digistar 2's built-in Milky Way model. The model is a circle of parallel lines that, when defocused, appear as the continuous band of the Milky Way across the sky. On more complex models, especially three-dimensional ones, brightness and details may be lost in this process, so it is not useful in all situations. The Digistar and Digistar 2 also suffer focus limitations. Because they use a single lens to cover the entire dome, it is difficult to gain perfect focus across the dome. Coupled with this, stars greater than a certain brightness are "multihit" points, meaning the projector draws two dots at the given position to accommodate the brightness of the star. Errors in the projector can lead the second dot to be slightly out-of-place with the first one. These two issues together, along with other issues that can occur within the projector's focus system, give the stars a blobby look. Some p
Read more →
Interlacing (bitmaps)

In computing, interlacing (also known as interleaving) is a method of encoding a bitmap image such that a person who has partially received it sees a degraded copy of the entire image. When communicating over a slow communications link, this is often preferable to seeing a perfectly clear copy of one part of the image, as it helps the viewer decide more quickly whether to abort or continue the transmission. Interlacing is supported by the following formats, where it is optional: GIF interlacing stores the lines in the order 0 , 8 , 16 , … , ( 8 n ) , 4 , 12 , … , ( 8 n + 4 ) , 2 , 6 , 10 , 14 , … , ( 4 n + 2 ) , 1 , 3 , 5 , 7 , 9 , … , ( 2 n + 1 ) . {\displaystyle 0,8,16,\dots ,(8n),\ 4,12,\dots ,(8n+4),\ 2,6,10,14,\dots ,(4n+2),\ 1,3,5,7,9,\dots ,(2n+1).} PNG uses the Adam7 algorithm, which interlaces in both the vertical and horizontal direction. TGA uses two optional interlacing algorithms: Two-way: 0 , 2 , 4 , … , ( 2 n ) , 1 , 3 , … , ( 2 n + 1 ) , {\displaystyle 0,2,4,\dots ,(2n),\ 1,3,\dots ,(2n+1),} And four-way: 0 , 4 , 8 , … , ( 4 n ) , 1 , 5 , … , ( 4 n + 1 ) , 2 , 6 , … , ( 4 n + 2 ) , 3 , 7 , … , ( 4 n + 3 ) . {\displaystyle 0,4,8,\dots ,(4n),\ 1,5,\dots ,(4n+1),\ 2,6,\dots ,\ (4n+2),3,7,\dots ,(4n+3).} JPEG, JPEG 2000, and JPEG XR (actually using a frequency decomposition hierarchy rather than interlacing of pixel values) PGF (also using a frequency decomposition) Interlacing is a form of incremental decoding, because the image can be loaded incrementally. Another form of incremental decoding is progressive scan. In progressive scan the loaded image is decoded line for line, so instead of becoming incrementally clearer it becomes incrementally larger. The main difference between the interlace concept in bitmaps and in video is that even progressive bitmaps can be loaded over multiple frames. For example: Interlaced GIF is a GIF image that seems to arrive on your display like an image coming through a slowly opening Venetian blind. A fuzzy outline of an image is gradually replaced by seven successive waves of bit streams that fill in the missing lines until the image arrives at its full resolution. Interlaced graphics were once widely used in web design and before that in the distribution of graphics files over bulletin board systems and other low-speed communications methods. The practice is much less common today, as common broadband internet connections allow most images to be downloaded to the user's screen nearly instantaneously, and interlacing is usually an inefficient method of encoding images. Interlacing has been criticized because it may not be clear to viewers when the image has finished rendering, unlike non-interlaced rendering, where progress is apparent (remaining data appears as blank). Also, the benefits of interlacing to those on low-speed connections may be outweighed by having to download a larger file, as interlaced images typically do not compress as well.
Read more →
Gas (app)

Gas (sometimes stylized in all caps), formerly known as Melt as well as Crush, was an American anonymous social media app. Launched in August 2022, the app is oriented towards high schoolers. The app was developed by Nikita Bier, Isaiah Turner, and former Facebook engineer Dave Schatz. Gas was largely based upon the prior tbh app developed by co-founder Nikita Bier, along with Erik Hazzard, Kyle Zaragoza, and Nicolas Ducdodon in September 2017. tbh was acquired by Facebook inc. (now Meta Platforms) on October 16, 2017, and nearly a year later in July 2018 was dissolved, owing to low usage. Gas follows a similar purpose to tbh in being a social media app oriented towards high schoolers. In the app, users participate in anonymous polls regarding pre-written complimentary statements to their peers, such as "I'd say yes if (blank) asked me out on a date," "I think (blank) is the coolest kid in school," or "would make an ugly face and still look pretty." Winners of said polls receive a "flame." The name of the app is derived from this, with "gassing someone up" being Gen Z slang for complimenting someone. Users can pay a $6.99 subscription that enables "God Mode," which shows hints regarding who voted for them in a poll. Gas overtook TikTok and BeReal as the most downloaded app on the Apple App Store in October 2022 (the app is currently not available for Android). The app has over 5.1 million downloads as of early November 2022, over a million active users and 300 thousand daily downloads as of October 2022. Currently, the app is available in Canada and the majority of the United States. On January 17, 2023, Gas was acquired by Discord, however it would remain a standalone app and its developers became Discord staff members. On October 18, 2023, Discord announced that service for Gas would be permanently ending effective November 7, 2023, due to a steep decline in users. Effective November 7, the app became completely unusable. == Controversy regarding human-trafficking == Beginning in October 2022, rumors spread largely throughout TikTok and Snapchat alleged that the app was linked to human trafficking (in particular sex trafficking). According to Bier, the rumor originated with a single user review from China on October 5, and then was disseminated through TikTok accounts with "few to no US teen followers." Although largely dismissed as a hoax by experts, who cite how the app doesn't log user locations and general anonymity, the hoax became pervasive to the extent that various police departments, school systems, and local news outlets began issuing warnings regarding the app. For instance, on October 31, 2022, the police department of Piedmont, Oklahoma issued a warning to parents, encouraging them to check their children's phones, while on November 3, the Oklahoma Oktaha Public School system stated in a Facebook post that "Children are being kidnapped in other towns and this new app is thought to be the source of predators finding their location." (both statements have since been retracted by Police Chief Scott Singer and Superintendent Jerry Needham respectively). Additionally, local medial outlets such as KOCO in Oklahoma City ran stories making similar statements. The rumor had a negative impact on the app, with downloads plateauing for a two-week period in late October and with 3% of users in a single day reportedly uninstalling the app. Revenue and ratings have also reportedly dropped and the company's social media accounts have been bombarded with comments labeling them as sex-traffickers. Additionally, the four-person development team has reportedly been bombarded with various death threats as a result.
Read more →
Israeli cybersecurity industry

The Israeli cybersecurity industry is a rapidly growing sector within Israel's technology and innovation ecosystem. Israel is internationally recognized as a powerhouse in the cybersecurity domain, with numerous cybersecurity startups, established companies, research institutions, and government initiatives. Tel Aviv itself is being ranked 7th in annual list of best global tech ecosystems, as reported by the Jerusalem Post. == History == The roots of Israel's cybersecurity industry can be traced back to the country's strong focus on national security and intelligence. The establishment of elite military units such as Unit 8200, the Israeli Intelligence Corps unit responsible for signals intelligence and code decryption, played a significant role in the development of cybersecurity expertise in the country. Many former members of Unit 8200 have gone on to establish successful cybersecurity companies or join existing organizations, bringing their unique skill sets and experience to the private sector. == Market overview == As of 2024, Israel housed more than 450 cybersecurity startups and companies. In 2023, the value of exits by Israeli tech companies reached $7.5 billion. Israel's cybersecurity industry is characterized by a high concentration of startups develop new technologies in areas such as network security, endpoint protection, data security, cloud security, and threat intelligence. In recent years, the sector has attracted significant investment from both local and international venture capital firms, as well as major technology companies such as Microsoft, Google, and IBM. Several Israeli cybersecurity companies have gained global recognition and success, with some being acquired by major corporations or conducting successful initial public offerings (IPOs). === Key Israeli cybersecurity companies === Some key Israeli cybersecurity companies include: Check Point Software Technologies CyberArk Cato Networks Radware Wiz === Financial activity === Israel’s cybersecurity sector has seen significant financial activity. As of 2023, mergers and acquisitions in the cybersecurity sector totaled $2.8 billion. In the first quarter of 2024, the sector secured $846 million in private funding. == Background == The military experience helped much. Israel's mandatory military service, combined with the expertise developed within elite units such as Unit 8200, has fostered a strong talent pool with practical experience in cybersecurity. Israel's thriving startup ecosystem, often referred to as the "Startup Nation," has fostered an environment of innovation and collaboration that has contributed to the growth of the cybersecurity industry. Israeli cybersecurity companies often collaborate with international partners, both in the private and public sectors, to share knowledge and develop joint solutions. === Government Initiatives and Support === The government also supported well through various initiatives, such as the Israel National Cyber Directorate (INCD), which works to strengthen cybersecurity defenses and promote the development of the sector. === Academic institutions === Israeli universities and research centers are involved in cybersecurity research and education, contributing to the development of new technologies and training the next generation of cybersecurity professionals. Academic Tech transfer offices in Israel also facilitate the commercialization of cybersecurity technologies. Some academic institutions with cybersecurity laboratories include: Tel Aviv University Technion Ben-Gurion University
Read more →
Snap (computer graphics)

In computer graphics, snapping allows an object to be easily positioned in alignment with grid lines, guide lines or another object, by causing it to automatically jump to an exact position when the user drags it to the proximity of the desired location. Some CAD software provides a "Snap" pull-down menu with diverse options as preferences for the practice of the operation. In Windows, with the "snap windows" option enabled, snapping a window against the top (or side) edge of the screen causes it to change into full screen (or half-screen for multitasking). Software snapping is analogous to hardware detents which serve to indicate discrete values or steps of an input device.
Read more →
Texture compression

Texture compression is a specialized form of image compression designed for storing texture maps in 3D computer graphics rendering systems. Unlike conventional image compression algorithms, texture compression algorithms are optimized for random access. Texture compression can be applied to reduce memory usage at runtime. Texture data is often the largest source of memory usage in a mobile application. == Tradeoffs == In their seminal paper on texture compression, Beers, Agrawala and Chaddha list four features that tend to differentiate texture compression from other image compression techniques. These features are: Decoding Speed It is highly desirable to be able to render directly from the compressed texture data and so, in order not to impact rendering performance, decompression must be fast. Random Access Since predicting the order that a renderer accesses texels would be difficult, any texture compression scheme must allow fast random access to decompressed texture data. This tends to rule out many better-known image compression schemes such as JPEG or run-length encoding. Compression Rate and Visual Quality In a rendering system, lossy compression can be more tolerable than for other use cases. Some texture compression libraries, such as crunch, allow the developer to flexibly trade off compression rate vs. visual quality, using methods such as rate–distortion optimization (RDO). Encoding Speed Texture compression is more tolerant of asymmetric encoding/decoding rates as the encoding process is often done only once during the application authoring process. Given the above, most texture compression algorithms involve some form of fixed-rate lossy vector quantization of small fixed-size blocks of pixels into small fixed-size blocks of coding bits, sometimes with additional extra pre-processing and post-processing steps. Block Truncation Coding is a very simple example of this family of algorithms. Because their data access patterns are well-defined, texture decompression may be executed on-the-fly during rendering as part of the overall graphics pipeline, reducing overall bandwidth and storage needs throughout the graphics system. As well as texture maps, texture compression may also be used to encode other kinds of rendering map, including bump maps and surface normal maps. Texture compression may also be used together with other forms of map processing such as mipmaps and anisotropic filtering. == Availability == Some examples of practical texture compression systems are S3 Texture Compression (S3TC), PVRTC, Ericsson Texture Compression (ETC) and Adaptive Scalable Texture Compression (ASTC); these may be supported by special function units in modern graphics processing units (GPUs). OpenGL and OpenGL ES, as implemented on many video accelerator cards and mobile GPUs, can support multiple common kinds of texture compression - generally through the use of vendor extensions. == Supercompression == A compressed-texture can be further compressed in what is called "supercompression". Fixed-rate texture compression formats are optimized for random access and are much less efficient compared to image formats such as PNG. By adding further compression, a programmer can reduce the efficiency gap. The extra layer can be decompressed by the CPU so that the GPU receives a normal compressed texture, or in newer methods, decompressed by the GPU itself. Supercompression saves the same amount of VRAM as regular texture compression, but saves more disk space and download size. == Neural Texture Compression == Random-Access Neural Compression of Material Textures (Neural Texture Compression) is a Nvidia's technology which enables two additional levels of detail (16× more texels, so four times higher resolution) while maintaining similar storage requirements as traditional texture compression methods. The key idea is compressing multiple material textures and their mipmap chains together, and using a small neural network, that is optimized for each material, to decompress them.
Read more →
NNDB

The Notable Names Database (NNDB) is an online database of biographical details of over 40,000 people. Soylent Communications, a sole proprietorship that also hosted the later defunct Rotten.com, describes NNDB as an "intelligence aggregator" of noteworthy persons, highlighting their interpersonal connections. The Rotten.com domain was registered in 1996 by former Apple and Netscape software engineer Thomas E. Dell, who was also known by his internet alias, "Soylent". == Entries == Each entry has an executive summary followed by a brief narrative about their life. It also lists date and cause of death if deceased. Businesspeople and government officials are listed with chronologies of their posts, positions, and board memberships. As of 2022, the site is no longer updated. == NNDB Mapper == The NNDB Mapper, a visual tool for exploring connections between people, was made available in May 2008. It required Adobe Flash 7.
Read more →
Security switch

A security switch is a hardware device designed to protect computers, laptops, smartphones and similar devices from unauthorized access or operation, distinct from a virtual security switch which offers software protection. Security switches should be operated by an authorized user only; for this reason, it should be isolated from other devices, in order to prevent unauthorized access, and it should not be possible to bypass it, in order to prevent malicious manipulation. The primary purpose of a security switch is to provide protection against surveillance, eavesdropping, malware, spyware, and theft of digital devices. Unlike other protections or techniques, a security switch can provide protection even if security has already been breached, since it does not have any access from other components and is not accessible by software. It can additionally disconnect or block peripheral devices, and perform "man in the middle" operations. A security switch can be used for human presence detection since it can only be initiated by a human operator. It can also be used as a firewall. == Types == === Hardware kill switch === A hardware kill switch (HKS) is a physical switch that cuts the signal or power line to the device or disable the chip running them. == Examples == A cellphone is compromised by malicious software, and the device initiates video and audio recording. When the user activates the “prevent capture of audio/video” mode of the security switch, that either physically disconnects or cut the power to the microphone and the camera, which stops the recording. A laptop that has an embedded security switch is stolen. The security switch detects a lack of communication from a specific external source for 12 hours, and responds by disconnecting the screen, keyboard and other key components, rendering the laptop useless, with no possibility of recovery, even with a full format. A user wishes to prevent tracking of their location. The user then activates geolocation protection and the security switch disables all GPS communication, eliminating the possibility of tracking the device's location. A user desires to eliminate the possibility of their PIN being copied from their smartphone. They can activate the secure input function, causing the security switch to disconnect the touch screen from the operating system, so input signals are not available to any devices except the switch. A security switch performs scheduled monitoring and finds that a program is attempting to download malicious content from the internet. It then activates internet security function and disables internet access, interrupting the download. If laptop software is compromised by air-gap malware, the user may activate the security switch and disconnect the speaker and microphone, so it can not establish communication with the device. == History == Google started to work on a hardware kill switch for AI in 2016. In 2019, Apple, and Google, along with a handful of smaller players, are designing “kill switches” that cut the power to the microphones or cameras in their devices. Googles first product that implemented this is Nest Hub Max. Hardware kill switches are already available and widely tested on the PinePhone, Librem, Shiftphone, to cut power to the input peripherals (microphone, camera) but also the network connectivity modules (wifi, cellular network).
Read more →
SMBGhost

SMBGhost (or SMBleedingGhost or CoronaBlue) is a type of security vulnerability, with wormlike features, that affects Windows 10 computers and was first reported publicly on 10 March 2020. == Security vulnerability == A proof of concept (PoC) exploit code was published 1 June 2020 on GitHub by a security researcher. The code could possibly spread to millions of unpatched computers, resulting in as much as tens of billions of dollars in losses. Microsoft recommends all users of Windows 10 versions 1903 and 1909 and Windows Server versions 1903 and 1909 to install patches, and states, "We recommend customers install updates as soon as possible as publicly disclosed vulnerabilities have the potential to be leveraged by bad actors ... An update for this vulnerability was released in March [2020], and customers who have installed the updates, or have automatic updates enabled, are already protected." Workarounds, according to Microsoft, such as disabling SMB compression and blocking port 445, may help but may not be sufficient. According to the advisory division of Homeland Security, "Malicious cyber actors are targeting unpatched systems with the new [threat], ... [and] strongly recommends using a firewall to block server message block ports from the internet and to apply patches to critical- and high-severity vulnerabilities as soon as possible."
Read more →
Central Equipment Identity Register

A Central Equipment Identity Register (CEIR) is a database of mobile equipment identifiers (IMEI – for networks of GSM standard, MEID – for networks of CDMA standard). Such an identifier is assigned to each SIM slot of the mobile device. Different kinds of IMEIs could be, White, for devices that are allowed to register in the cellular network; Black, for devices that are prohibited to register in the cellular network; and Grey, for devices in intermediate status (when it is not yet defined in which of the lists - black or white - the device should be placed). Depending on the rules of mobile equipment registration in a country the CEIR database may contain other lists or fields beside IMEI. For example, the subscriber number (MSISDN), which is bound to the IMEI, the ID of the individual (passport data, National ID, etc.) who registered IMEI in the database, details of the importer who brought the device into the country, etc. == History == Originally abbreviation CEIR stood for IMEI Database, created and provided by GSM Association. It was proposed to blacklist the IMEIs of stolen or lost phones. It was assumed that any MNO would be able to receive this list to block the registration of such devices on their network. Thus, it turns out that a stolen phone, once blacklisted by the GSMA CEIR, cannot be used on a large number of cellular networks, which means that the theft of mobile devices will become meaningless. However, it soon became clear that the MNOs on their initiative were not going to do this because if many phones stopped working in their networks, but works in another, it puts them at a disadvantage and can lead to an outflow of subscribers. It became clear that the blocking of stolen devices should be introduced simultaneously in all mobile networks of the country by legislative measures at the initiative of the communications regulator. In this case, as a rule, a national IMEI database is created, which contains general lists of blocked IMEIs. Since the registration in the cellular operator's network is directly blocked by a network node called EIR (Equipment Identity Register), the system that contains the national IMEI base became known as Central EIR (CEIR). To avoid confusion the database of GSM Association was renamed to IMEI Database - IMEI DB (it was in 2003-2008, see “Document History” at IMEI Database File Format Specification). Also sometimes a common IMEI database for several EIRs is called SEIR (Shared EIR). In each country, the CEIR can interact with IMEI DB differently. National CEIR may not communicate with IMEI DB at all. Firstly, it is separately decided whether CEIR will send information about its blacklist to IMEI DB (which IMEIs are placed in it or removed from there). Secondly, upon receipt of the blacklist from IMEI DB, the regulator decides from which countries it will receive it (IMEI DB stores the information exactly who blacklisted the IMEI). For example, you can get a list from neighboring countries, from countries in your region, from around the world. In addition to the blacklist, the GSMA is developing a list of IMEIs allocated to manufacturers for use in their devices. The manufacturer for each new device model gets at least one TAC (Type Allocation Code) allocated by GSMA, consisting of 8 digits, to which he can add a 6-digit serial number to obtain the IMEI. Thus, with one TAC, a manufacturer can release up to 1 million devices with a unique IMEI. Usually, CEIR receives a list of allocated TACs from the GSMA, since if the first 8 digits of the IMEI of a device are not in this list, this is a sign that it is counterfeit. If the central database of identifiers does not work with GSM networks, but with CDMA, then for the same purposes it is necessary to interact with another worldwide database that contains MEIDs – MEID Database. A system that directly blocks the registration of a mobile device on a cellular network – EIR. Each MNO must have at least one EIR, to which IMEI check requests (CheckIMEI) are sent when registering a device on the network. A typical EIR and CERI interaction scheme: The CEIR accumulates black, white, and grey lists using various data sources and verification methods. These lists are periodically transmitted to all EIRs. EIR uses them when processing every CheckIMEI request to determine whether to allow the device on the network or not. EIR can transmit some data to the CEIR database too. Usually, changes in a grey list – new IMEIs on the network that are not in any list – are transmitted from EIR to CEIR. In addition to synchronizing lists across multiple networks, the main function of CEIR is to implement the scenarios of changes at these lists. This usually requires interaction with various IT systems (databases) of other organizations and/or with subscribers. Еxamples of such scenarios: Whitelisting the IMEI of devices imported by the legal entity Whitelisting the IMEI of devices manufactured domestically Whitelisting the IMEI of devices imported by individual Blacklisting the IMEI of stolen/lost devices Binding IMEI to the subscriber's number and, vice versa, unbinding IMEI from the subscriber == System implementation results == The goals and results of CEIR implementation in a country are usually: Reducing mobile phone theft Reducing the import of devices stolen in other countries Reducing the presence of counterfeit devices on the market (null IMEI, incorrect IMEI, changed IMEI) Reducing illegal imports of mobile devices (increase in the collection of customs duties) Additionally, CEIR most often contributes to the solution of such problems: Combating various mobile fraud schemes Obtaining more accurate statistics on the state of the mobile communications market for the regulator Fight against terrorism (the ability to block the device at once in all mobile networks of the country). Known results achieved in some countries: Great Britain – reducing mobile phone theft. Turkey – reducing mobile phone theft, decreasing the current account deficit of Turkey and maximizing tax revenues. Uzbekistan – preventing black import of mobile devices by 98%, increase in revenues from the import of mobile devices by 700%. Kenya – disposing the market of counterfeit mobile equipment. Azerbaijan – disposing the market of counterfeit mobile equipment. Ukraine – increasing of legally imported mobile devices by 95%, increase in revenues from the import of mobile devices. == CEIR and EIR manufacturers == Some countries have used local developers to implement CEIR for their country (Great Britain, Turkey, India, and Azerbaijan). EIR is a system that is standardized in a 2G-5G networks. Such system may be established at mobile network even it doesn’t use black list and there are no CEIR in a country. Some developers of MNO’s signal core include EIR in a complex solution. However, its standard capabilities are usually lacking for specific requirements when implementing CEIR.
Read more →
Scene text

Scene text is text that appears in an image captured by a camera in an outdoor environment. The detection and recognition of scene text from camera captured images are computer vision tasks which became important after smart phones with good cameras became ubiquitous. The text in scene images varies in shape, font, colour and position. The recognition of scene text is further complicated sometimes by non-uniform illumination and focus. To improve scene text recognition, the International Conference on Document Analysis and Recognition (ICDAR) conducts a robust reading competition once in two years. The competition was held in 2003, 2005 and during every ICDAR conference. International association for pattern recognition (IAPR) has created a list of datasets as Reading systems. == Text detection == Text detection is the process of detecting the text present in the image, followed by surrounding it with a rectangular bounding box. Text detection can be carried out using image based techniques or frequency based techniques. In image based techniques, an image is segmented into multiple segments. Each segment is a connected component of pixels with similar characteristics. The statistical features of connected components are utilised to group them and form the text. Machine learning approaches such as support vector machine and convolutional neural networks are used to classify the components into text and non-text. In frequency based techniques, discrete Fourier transform (DFT) or discrete wavelet transform (DWT) are used to extract the high frequency coefficients. It is assumed that the text present in an image has high frequency components and selecting only the high frequency coefficients filters the text from the non-text regions in an image. == Word recognition == In word recognition, the text is assumed to be already detected and located and the rectangular bounding box containing the text is available. The word present in the bounding box needs to be recognized. The methods available to perform word recognition can be broadly classified into top-down and bottom-up approaches. In the top-down approaches, a set of words from a dictionary is used to identify which word suits the given image. Images are not segmented in most of these methods. Hence, the top-down approach is sometimes referred as segmentation free recognition. In the bottom-up approaches, the image is segmented into multiple components and the segmented image is passed through a recognition engine. Either an off the shelf Optical character recognition (OCR) engine or a custom-trained one is used to recognise the text.
Read more →
Key–value database

A key-value database, or key-value store, is a data storage paradigm designed for storing, retrieving, and managing associative arrays, a data structure more commonly known today as a dictionary. Dictionaries contain a collection of objects, or records, which in turn have many different fields within them. These records are stored and retrieved using a key that uniquely identifies the record, and is used to find the data within the database. Key-value databases differ from the better known relational databases (RDB). RDBs pre-define the data structure in the database as a series of tables containing fields with well-defined data types. Exposing the data types to the database program allows it to apply various optimizations. In contrast, key-value systems treat the value as opaque to the database itself, and typically support only simple operations such as storing, retrieving, updating, and deleting a value by its key. This offers considerable flexibility and makes such systems well suited to low-latency, high-throughput workloads dominated by direct key lookups, but less suitable for applications that require complex queries or explicit relationships among records. A lack of standardization, limited transaction support, and relatively simple query interfaces long restricted many key-value systems to specialized uses, but the rapid move to cloud computing after 2010 helped drive renewed interest in them as part of the broader NoSQL movement. Some graph databases, such as ArangoDB, are also key–value databases internally, adding the concept of relationships (pointers) between records as a first-class data type. == Types and examples == Key–value systems span a wide consistency spectrum, from eventually consistent designs to strongly consistent or serializable ones, and some allow the consistency level to be configured as part of the trade-off against latency and availability. Renewed interest in key–value and other NoSQL systems was driven in part by the demands of big data, distributed, and cloud applications. Their scalability and availability made them attractive for cloud data management, although limited transaction support, low-level query interfaces, and the lack of standardization remained obstacles to wider adoption. Some maintain data in memory (RAM), while others employ solid-state drives or rotating disks. Some key–value systems add additional structure to their keys. For example, Oracle NoSQL Database organizes records using composite keys with "major" and "minor" components, an arrangement that Oracle compares to a directory-path structure in a file system. More generally, however, key–value stores are defined by their use of unique keys associated with opaque values and by their emphasis on simple key-based operations. Unix included dbm (database manager), a minimal database library written by Ken Thompson for managing associative arrays with a single key and hash-based access. Later implementations and related libraries included sdbm, GNU dbm (gdbm), and Berkeley DB. A more recent example is RocksDB, a persistent key–value storage engine developed at Facebook and designed for large-scale applications. Other examples include in-memory systems such as Memcached and Redis, and persistent systems such as Berkeley DB, Riak, and Voldemort.
Read more →
Data classification (data management)

Data classification is the process of organizing data into categories based on attributes like file type, content, or metadata. The data is then assigned class labels that describe a set of attributes for the corresponding data sets. The goal is to provide meaningful class attributes to former less structured information, enabling organizations to manage, protect, and govern their data more effectively. Data classification can be viewed as a multitude of labels that are used to define the type of data, especially on confidentiality and integrity issues. == Approaches == Classification techniques might be used for reports generated by ERP systems or where the data includes specific personal information that is identified. Many organizations also employ context-based classification that considers factors such as data source, user identity, and application context. == Regulatory frameworks == Data classification schemes are mandated or implied by numerous regulatory frameworks that require organizations to identify, categorize, and protect sensitive information according to its level of sensitivity. The Health Insurance Portability and Accountability Act (HIPAA) Security Rule requires covered entities to conduct an accurate and thorough assessment of potential risks and vulnerabilities to the confidentiality, integrity, and availability of protected health information under 45 CFR 164.308(a)(1)(ii)(A), which necessitates classification of data to distinguish protected health information from other organizational data."Security Standards: Administrative Safeguards". U.S. Department of Health and Human Services. Retrieved April 1, 2026. The December 2024 HIPAA Security Rule notice of proposed rulemaking (90 FR 898) would mandate comprehensive technology asset inventories and require mapping of how electronic protected health information moves through an organization, formalizing data classification as an explicit compliance obligation."HIPAA Security Rule To Strengthen the Cybersecurity of Electronic Protected Health Information". Federal Register. January 6, 2025. Retrieved April 1, 2026. NIST Special Publication 800-60 provides guidelines for mapping information types to security categories, establishing a structured methodology for federal agencies to classify data and apply appropriate security controls based on the potential impact of a security breach."NIST SP 800-60 Vol. 1 Rev. 1: Guide for Mapping Types of Information and Information Systems to Security Categories". National Institute of Standards and Technology. August 2008. Retrieved April 1, 2026.
Read more →