AI For Business Ualbany

AI For Business Ualbany — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Masking (art)

In art, craft, and engineering, masking is the use of materials to protect areas from change, or to focus change on other areas. This can describe either the techniques and materials used to control the development of a work of art by protecting a desired area from change; or a phenomenon that (either intentionally or unintentionally) causes a sensation to be concealed from conscious attention. The term is derived from the word mask, in the sense that it hides the face from view. == In painting == Masking materials supplement a painter's dexterity and choice of applicator to control where paint is laid. Examples include the use of a stencil or masking tape to protect areas which are not to be painted. === Solid masks === Most solid masks require an adhesive to hold the mask in place while work is performed. Some, such as masking tape and frisket, come with adhesive pre-applied. Solid masks are readily available in bulk, and are used in large painting jobs. Paper products Kraft paper Butcher paper Masking tape Plastic film Frisket Polyester tape Stencils Silk screen === Liquid masks === Liquid masks are preferred where precision is needed; they prevent paint from seeping underneath, resulting in clean edges. Care must be taken to remove them without damaging the work underneath. Latex or other polymers Molten wax Gesso, typically a substrate for painting, but can also be applied to achieve masking effects == In photography == Masks used for photography are used to enhance the quality of an image. Representations of a scene—whether film, video display, or printed—do not have the dynamic contrast range available to the human eye looking directly at the same scene. Adjusting the contrast in an image helps restore some of the perceived qualities of the original scene. These adjustments are typically performed on "blown-out" highlights, and "crushed" or "muddy" shadow areas, where clipping has occurred; or on desaturated colors. Photographic masks are peculiar in that they are produced from the image they will alter, an exercise in recursion. Masks used to produce other effects are similar to those used in painting. === Controlling exposure === ==== Film ==== The basic methods of controlling exposure are dodging and burning, which respectively lighten (reduce exposure) and darken (increase exposure) areas of an image. The tools a film photographer uses range from shaped pieces of black material (such as studio foil, foam, and paper) to the photographer's hands. To create a photographic mask, a sheet of negative film is contact-exposed to the original film negative or slide positive in a particular way. Both films are then combined to produce a processed positive. The process is similar when applied using digital techniques: the inverse of the working image is reduced to an image mask; filters or other adjustments are then applied, using the mask to selectively block portions of the image. ==== Digital ==== Image editors offer at the very least a "Select All" command and a rectangular "marquee" selection tool. (The word "marquee" describes the "crawling ants" border used to highlight the active region.) Once a selection is created, further changes to the image will be confined to that area. To continue editing the rest of the image, the selection is either "deselected" or the entire image is selected. Advanced suites offer more ways to select portions of an image, as well as ways to combine these selections through. Selection masks can be switched between an editable greyscale image and a mask. They allow the user to create a mask using the suite's painting tools. === Contrast masking === When the contrast range of an image needs to be adjusted, a contrast mask is a simple solution. The processed image resembles what would be achieved when exposing through a neutral density filter, but the effects are focused highly upon the extreme regions of the image. The blocking areas of the mask coincide with the highlights of the image, and the permissive areas with the shadows, resulting in more detail appearing in each. ==== Film ==== The mask is often made from high-quality black-and-white film, such as Kodak Technical Pan, which allows for a degree of softening on the mask. Its processing time is reduced so as to not completely oppose the original negative. Both negatives are combined and registered, and collectively exposed with additional time to compensate for the presence of the mask. ==== Digital ==== Contrast masking is made simpler with digital editing. A grayscale version of the image is produced, either by desaturation or by calculating selected ratios of the image's color channels, inverted, and blurred. The mask and original image are blended together to produce the final processed image. Some image editors allow for refinement of the effect by changing the strength of the blend. Contrast masking can be considered to be the opposite of gamma correction, which adjusts the midtones of an image. Effects similar to contrast masking can be achieved by adjusting the response curves of an image. === Unsharp masking === A derivative of contrast masking is unsharp masking, an unusual term for a process intended to increase the apparent sharpness (acutance) of an image. Unsharp masking uses a blurred form of the image to increase contrast along regions of moderate contrast difference. Around edges, the blur region causes highlights to overexpose and shadows to underexpose. Taken to an extreme, the edges become overly visible and detract from the quality of the image—this is referred to as halation. Unsharp masking does not increase the actual sharpness, as it cannot recover details lost to blurring. ==== Film ==== Unsharp masking allows the photographer to sharpen areas that have become blurred in the original negative, due to long shutter speed/exposure time, or from using a wide aperture/"fast" lens. When creating the unsharp mask, extra space or diffusing material is added between the image and the mask to produce the necessary blur. ==== Digital ==== Unsharp masking has become automated in digital editing, with higher-end suites offering the process as a "tool" or "filter" in their standard sharpening kits—the actual creation of a mask is bypassed in favor of calculations that represent the mask's effect. The process depends on three factors: the radius of the blur, the strength of the effect, and the threshold degree of contrast above which the effect will be applied. (Adjusting the threshold allows the editor to apply the effect selectively upon moderately defined edges and ignore image noise.) Unsharp masking is computationally more complex than other sharpening algorithms, but results in a higher-quality remedy. Deconvolution allows for truer sharpening, but is much more complex than unsharp masking.
Read more →
AltStore

AltStore is an alternative app store for the iOS and iPadOS[1] mobile operating systems, which allows users to download applications that are not available on the App Store, most commonly tweaked apps, jailbreak apps, and apps including paid apps on the app store. It was publicly announced on September 25, 2019, and launched on September 28. == History == Riley Testut is an American developer who began to work on AltStore after Apple declined to allow his Nintendo emulator Delta on the App Store. Since Xcode allowed him to temporarily install his Delta app to his iOS device for 7 days of testing, he created AltStore in 2019 to replicate this functionality, which could be extended to other .ipa files. As of 2022, AltStore had been downloaded 1.5 million times. In the following years, AltStore expanded beyond its initial sideloading functionality. The platform was founded by Testut, with Shane Gill later joining as co-founder. AltStore was initially supported through Patreon contributions from its user community, and later saw increased adoption following regulatory developments in the European Union that enabled broader third-party app distribution. The project has also been involved in notable industry collaborations, including a partnership with Epic Games. == Features == AltStore exploits a loophole in the Xcode developer platform, which allows developers to sideload their own apps which they are working on without needing to jailbreak. Sideloaded apps are signed like a developer project for testing and will expire after 7 days with a free account or one year with a paid developer account, by which they will need to be refreshed or reinstalled.
Read more →
Vision transformer

A vision transformer (ViT) is a transformer designed for computer vision. A ViT decomposes an input image into a series of patches (rather than text into tokens), serializes each patch into a vector, and maps it to a smaller dimension with a single matrix multiplication. These vector embeddings are then processed by a transformer encoder as if they were token embeddings. ViTs were designed as alternatives to convolutional neural networks (CNNs) in computer vision applications. They have different inductive biases, training stability, and data efficiency. Compared to CNNs, ViTs are less data efficient, but have higher capacity. Some of the largest modern computer vision models are ViTs, such as one with 22B parameters. Subsequent to its publication, many variants were proposed, with hybrid architectures with both features of ViTs and CNNs. ViTs have found application in image recognition, image segmentation, weather prediction, and autonomous driving. == History == Transformers were introduced in Attention Is All You Need (2017), and have found widespread use in natural language processing. A 2019 paper applied ideas from the Transformer to computer vision. Specifically, they started with a ResNet, a standard convolutional neural network used for computer vision, and replaced all convolutional kernels by the self-attention mechanism found in a Transformer. It resulted in superior performance. However, it is not a Vision Transformer. In 2020, an encoder-only Transformer was adapted for computer vision, yielding the ViT, which reached state of the art in image classification, overcoming the previous dominance of CNN. The masked autoencoder (2022) extended ViT to work with unsupervised training. The vision transformer and the masked autoencoder, in turn, stimulated new developments in convolutional neural networks. Subsequently, there was cross-fertilization between the previous CNN approach and the ViT approach. In 2021, some important variants of the Vision Transformers were proposed. These variants are mainly intended to be more efficient, more accurate or better suited to a specific domain. Two studies improved efficiency and robustness of ViT by adding a CNN as a preprocessor. The Swin Transformer achieved state-of-the-art results on some object detection datasets such as COCO, by using convolution-like sliding windows of attention mechanism, and the pyramid process in classical computer vision. == Overview == The basic architecture, used by the original 2020 paper, is as follows. In summary, it is a BERT-like encoder-only Transformer. The input image is of type R H × W × C {\displaystyle \mathbb {R} ^{H\times W\times C}} , where H , W , C {\displaystyle H,W,C} are height, width, channel (RGB). It is then split into square-shaped patches of type R P × P × C {\displaystyle \mathbb {R} ^{P\times P\times C}} . For each patch, the patch is pushed through a linear operator, to obtain a vector ("patch embedding"). The position of the patch is also transformed into a vector by "position encoding" (the paper tried no embedding, 1D embedding, 2D embedding, and relative embedding: 1D was adopted). The two vectors are added, then pushed through several Transformer encoders. The attention mechanism in a ViT repeatedly transforms representation vectors of image patches, incorporating more and more semantic relations between image patches in an image. This is analogous to how in natural language processing, as representation vectors flow through a transformer, they incorporate more and more semantic relations between words, from syntax to semantics. The above architecture turns an image into a sequence of vector representations. To use these for downstream applications, an additional head needs to be trained to interpret them. For example, to use it for classification, one can add a shallow MLP on top of it that outputs a probability distribution over classes. The original paper uses a linear-GeLU-linear-softmax network. == Variants == === Original ViT === The original ViT was an encoder-only Transformer supervise-trained to predict the image label from the patches of the image. As in the case of BERT, it uses a special token in the input side, and the corresponding output vector is used as the only input of the final output MLP head. The special token is an architectural hack to allow the model to compress all information relevant for predicting the image label into one vector. Transformers found their initial applications in natural language processing tasks, as demonstrated by language models such as BERT and GPT-3. By contrast the typical image processing system uses a convolutional neural network (CNN). Well-known projects include Xception, ResNet, EfficientNet, DenseNet, and Inception. Transformers measure the relationships between pairs of input tokens (words in the case of text strings), termed attention. The cost is quadratic in the number of tokens. For images, the basic unit of analysis is the pixel. However, computing relationships for every pixel pair in a typical image is prohibitive in terms of memory and computation. Instead, ViT computes relationships among pixels in various small sections of the image (e.g., 16x16 pixels), at a drastically reduced cost. The sections (with positional embeddings) are placed in a sequence. The embeddings are learnable vectors. Each section is arranged into a linear sequence and multiplied by the embedding matrix. The result, with the position embedding is fed to the transformer. === Architectural improvements === ==== Pooling ==== After the ViT processes an image, it produces some embedding vectors. These must be converted to a single class probability prediction by some kind of network. In the original ViT and Masked Autoencoder, they used a dummy [CLS] token, in emulation of the BERT language model. The output at [CLS] is the classification token, which is then processed by a LayerNorm-feedforward-softmax module into a probability distribution. Global average pooling (GAP) does not use the dummy token, but simply takes the average of all output tokens as the classification token. It was mentioned in the original ViT as being equally good. Multihead attention pooling (MAP) applies a multiheaded attention block to pooling. Specifically, it takes as input a list of vectors x 1 , x 2 , … , x n {\displaystyle x_{1},x_{2},\dots ,x_{n}} , which might be thought of as the output vectors of a layer of a ViT. The output from MAP is M u l t i h e a d e d A t t e n t i o n ( Q , V , V ) {\displaystyle \mathrm {MultiheadedAttention} (Q,V,V)} , where q {\displaystyle q} is a trainable query vector, and V {\displaystyle V} is the matrix with rows being x 1 , x 2 , … , x n {\displaystyle x_{1},x_{2},\dots ,x_{n}} . This was first proposed in the Set Transformer architecture. Later papers demonstrated that GAP and MAP both perform better than BERT-like pooling. A variant of MAP was proposed as class attention, which applies MAP, then feedforward, then MAP again. Re-attention was proposed to allow training deep ViT. It changes the multiheaded attention module. === Masked Autoencoder === The Masked Autoencoder took inspiration from denoising autoencoders and context encoders. It has two ViTs put end-to-end. The first one ("encoder") takes in image patches with positional encoding, and outputs vectors representing each patch. The second one (called "decoder", even though it is still an encoder-only Transformer) takes in vectors with positional encoding and outputs image patches again. ==== Training ==== During training, input images (224px x 224 px in the original implementation) are split along a designated number of lines on each axis, producing image patches. A certain percentage of patches are selected to be masked out by mask tokens, while all others are retained in the image. The network is tasked with reconstructing the image from the remaining unmasked patches. Mask tokens in the original implementation are learnable vector quantities. A linear projection with positional embeddings is then applied to the vector of unmasked patches. Experiments varying mask ratio on networks trained on the ImageNet-1K dataset found 75% mask ratios achieved high performance on both finetuning and linear-probing of the encoder's latent space. The MAE processes only unmasked patches during training, increasing the efficiency of data processing in the encoder and lowering the memory usage of the transformer. A less computationally-intensive ViT is used for the decoder in the original implementation of the MAE. Masked patches are added back to the output of the encoder block as mask tokens and both are fed into the decoder. A reconstruction loss is computed for the masked patches to assess network performance. ==== Prediction ==== In prediction, the decoder architecture is discarded entirely. The input image is split into patches by the same algorithm as in training, but no patches are masked out. A linear projection wi
Read more →
Latent semantic mapping

Latent semantic mapping (LSM) is a data-driven framework to model globally meaningful relationships implicit in large volumes of (often textual) data. It is a generalization of latent semantic analysis. In information retrieval, LSA enables retrieval on the basis of conceptual content, instead of merely matching words between queries and documents. LSM was derived from earlier work on latent semantic analysis. There are 3 main characteristics of latent semantic analysis: Discrete entities, usually in the form of words and documents, are mapped onto continuous vectors, the mapping involves a form of global correlation pattern, and dimensionality reduction is an important aspect of the analysis process. These constitute generic properties, and have been identified as potentially useful in a variety of different contexts. This usefulness has encouraged great interest in LSM. The intended product of latent semantic mapping, is a data-driven framework for modeling relationships in large volumes of data. Mac OS X v10.5 and later includes a framework implementing latent semantic mapping.
Read more →
Scanimate

Scanimate is an analog computer animation (video synthesizer) system created by Lee Harrison III of Denver, Colorado. Harrison had developed its predecessor, ANIMAC, which generated used a motion capture system, based on a body suit with potentiometers. In contrast, Scanimate included TV technology. Scanimate's successor was called Caesar, and used a digital computer to control the analog system. The eight Scanimate systems were used to produce much of the video-based animation seen on television between most of the 1970s and early 1980s in commercials, promotions, and show openings. One of the major advantages the Scanimate system had over film-based animation and computer animation was the ability to create animations in real time. The speed with which animation could be produced on the system because of this, as well as its range of possible effects, helped it to supersede film-based animation techniques for television graphics. By the mid-1980s, it was superseded by digital computer animation, which produced sharper images and more sophisticated 3D imagery. Animations created on Scanimate and similar analog computer animation systems have a number of characteristic features that distinguish them from film-based animation: the motion is extremely fluid, using all 60 fields per second (in NTSC format video) or 50 fields (in PAL format video) rather than the 24 frames per second that film uses; the colors are much brighter and more saturated; and the images have a very "electronic" look that results from the direct manipulation of video signals through which the Scanimate produces the images. == How it works == A special high-resolution (around 945 lines) monochrome camera records high-contrast artwork. The image is then displayed on a high-resolution screen. Unlike a normal monitor, its deflection signals are passed through a special analog computer that enables the operator to bend the image in a variety of ways. The image is then shot from the screen by either a film camera or a video camera. In the case of a video camera, this signal is then fed into a colorizer, a device that takes certain shades of grey and turns it into color as well as transparency. The idea behind this is that the output of the Scanimate itself is always monochrome. Another advantage of the colorizer is that it gives the operator the ability to continuously add layers of graphics. This makes possible the creation of very complex graphics. This is done by using two video recorders. The background is played by one recorder and then recorded by another one. This process is repeated for every layer. This requires very high-quality video recorders (such as both the Ampex VR-2000 or IVC's IVC-9000 of Scanimate's era, the IVC-9000 being used quite frequently for Scanimate composition due to its very high generational quality between re-recordings). == Current usage == Two of the Scanimates are still in use at ZFx studios in Asheville, North Carolina. The original "Black Swan" R&D machine has been updated with more modern power supplies and can produce material in standard or 1080P high definition video. The "white Pearl" machine is the last one produced and is being kept in its original configuration for historical purposes by David Sieg at ZFx inc. The machines are installed in a working production environment with Grass Valley switchers, Kaleidoscope digital video effects systems, and Accom digital disk recorders for layering. == Use in television, music and films == === Music videos === Let's Groove by Earth, Wind & Fire Get Down on It by Kool & the Gang Blame It on the Boogie by The Jacksons Knock on Wood by Amii Stewart Popcorn Love by New Edition === TV programs/movies === === TV channels/home video/TV productions ===
Read more →
Text simplification

Text simplification is an aspect of natural language processing that involves modifying, organizing, or categorizing existing text to make it easier to understand while retaining its original meaning. This process is essential in today's world, where communication is increasingly complex due to advancements in science, technology, and media. Human languages are inherently intricate, with extensive vocabularies and complex structures that can be challenging for machines to handle efficiently. Researchers have found that semantic compression techniques can help streamline and simplify text by reducing linguistic diversity and simplifying the vocabulary used in a given context. == Example == Text simplification involves modifying complex sentences into simpler ones to enhance readability and comprehension. Siddharthan (2006) provides an example to illustrate this process. The original sentence contains multiple clauses and phrases, which can be broken down into simpler sentences for better understanding. Also contributing to the firmness in copper, the analyst noted, was a report by Chicago purchasing agents, which precedes the full purchasing agents report that is due out today and gives an indication of what the full report might hold. Also contributing to the firmness in copper, the analyst noted, was a report by Chicago purchasing agents. The Chicago report precedes the full purchasing agents report. The Chicago report gives an indication of what the full report might hold. The full report is due out today. An approach to text simplification involves lexical simplification via lexical substitution, a process that replaces complex words with simpler synonyms. Identifying complex words is a challenge addressed by machine learning classifiers trained on labeled data. Researchers have found that asking labelers to sort words by complexity levels yields more consistent results than the traditional method of categorizing words as simple or complex.
Read more →
Kdan Mobile

Kdan Mobile Software Limited is a software application development company based in Tainan City, Taiwan. Kdan also has branches in Taipei, Changsha, Irvine, California, Japan, and South Korea. The company was founded in 2009 by Kenny Su, the company's CEO. == History == Kdan Mobile was founded in 2009 by Kenny Su (蘇柏州) and develops an application for PDF documents. Su previously worked at the Industrial Technology Research Institute (ITRI) . In 2018, the company completed its Series B round of fundraising, in which it raised 16 million USD in total. Four global firms, Dattoz Partners (South Korea), WI Harper Group (U.S.), Taiwania Capital (Taiwan), and Golden Asia Fund Mitsubishi UFJ Capital (Japan), made up the Series B investment. Kdan previously raised 5 million USD in its Series A round in 2018.
Read more →
ByLock

ByLock was a smartphone application that allowed users to communicate via a private, encrypted connection. It was launched in March 2014 on Google Play, Apple App Store The app was downloaded over 600,000 times from its launch in April 2014 until March 2016, when it was permanently shut down. The Turkish National Intelligence Organization (Turkish: Millî İstihbarat Teşkilatı, MİT) stated that the app was downloaded mainly in Turkey and the users were “Fetullahist Terror Organisation (FETÖ) which was formerly known as “Gülen movement” members. == Gülen Movement controversy == In Turkey, possession of the app is deemed evidence of membership in the Gülen Movement, which was allegedly connected to the failed Turkish coup d'état attempt in July 2016. Users of ByLock were deemed terrorists in Turkish courts. According to Deutsche Welle, of the 215,000 former ByLock users, an estimated 23,000 have been detained by Turkish authorities. Some believe that the MİT and other Turkish authorities manipulated the ByLock database in order to arrest suspected members of the Gülen Movement. Tuncay Beşikçi, a computer forensic expert in Turkey, emphasized that "the demands to investigate and analyze ByLock data from independent institutions are refused by the Turkish courts. But it is not normal". Tuncay Beşikçi believes that this application is precisely one of the channels for Gülen molecules to communicate and can also monitor the activities of other members of the organization. He also stated that the developers behind the Mor Beyin app, deliberately set a plan in motion that would put thousands of innocent people in prison as a cover for the Gülen movement. In December 2017, Turkish authorities revealed that almost half the people who had been prosecuted for having ByLock on their smartphones would have their legal cases reviewed, as they could have been redirected to the app without their knowledge. Following the failed coup attempt on 15 July 2016, the use of the ByLock messaging application by members of the Gülen Movement was the sole evidence in investigations and prosecutions to justify arrests and convictions for "membership in an armed terrorist organization." However, these decisions have been considered human rights violations by the European Court of Human Rights (ECHR), the United Nations Human Rights Committee, and the UN Working Group on Arbitrary Detention. Some of the relevant decisions include the following: === Decisions of the European Court of Human Rights === On 20 July 2021, in the case of Tekin Akgün v. Turkey, the European Court of Human Rights (ECHR) ruled that the use of the ByLock messaging application, unless supported by other evidence, does not create a reasonable suspicion of a crime. Based on this reasoning, the court found that the detention order violated Article 5 of the European Convention on Human Rights, which protects the right to liberty and security. In the Yüksel Yalçınkaya v. Turkey decision on 26 September 2023, the European Court of Human Rights (ECHR) examined an appeal against a conviction based on the use of ByLock. The Court ruled that the failure to provide an opportunity to challenge the authenticity of the ByLock data violated the right to a fair trial (Article 6 of the ECHR). The Court also stated that the mere use of ByLock could not be considered sufficient evidence for membership in an armed terrorist organization. It further noted that local courts had established an automatic presumption of guilt based solely on ByLock use, creating a broad and unpredictable interpretation of the law, making it nearly impossible for the accused to exonerate themselves. Therefore, the Court concluded that the conviction based on the use of ByLock violated the principle of no punishment without law (Article 7 of the ECHR). On 22 July 2025, in the Demirhan and 238 Others case, the European Court of Human Rights (ECHR) consolidated the applications of 239 individuals who had been convicted of "membership in an armed terrorist organization" based on their use of ByLock, as determined by 239 separate courts in Turkey. The Court ruled that the convictions violated the right to a fair trial under Article 6 and the principle of no punishment without law under Article 7 of the European Convention on Human Rights (ECHR). The ruling stated that the Turkish courts' "categorical approach" to the use of ByLock lacked legal foundation. In this context, it was emphasized that anyone who had used ByLock could not be convicted of membership in an armed terrorist organization based solely on this reasoning. The ruling also stated that, due to the large number of similar applications, the issue was "systemic in nature" and it called for a national solution to be developed by Turkey. While the Court did not order compensation for the 239 applicants, it emphasized that reopening the trial to ensure the enforcement of the violation ruling was the most appropriate remedy. This ruling, which confirms the violation finding in the Yüksel Yalçınkaya case of 26 September 2023, is considered a continuation of the ECHR's case law concerning trials based on ByLock evidence. === Decisions of the United Nations Human Rights Committee and Working Group === In the İsmet Özçelik and Turgay Karaman v. Turkey decision, dated 28 May 2019 (Application No. 2980/2017), the UN Human Rights Committee ruled that the use of ByLock and allegations of depositing money into Bank Asya could not justify the applicants' arrests. In the Mestan Yayman v. Turkey decision (Opinion No. 42/2018 – 21 August 2018) by the UN Human Rights Council Working Group on Arbitrary Detention, it was stated that using a public messaging application like ByLock cannot be considered criminal evidence, and that the use of such an application falls under the scope of freedom of thought and expression. The dozens of decisions later issued by the UN Human Rights Council Working Group are of the same nature.
Read more →
LIVAC Synchronous Corpus

LIVAC is an uncommon language corpus dynamically maintained since 1995. Different from other existing corpora, LIVAC has adopted a rigorous and regular "Windows" approach in processing and filtering massive media texts from representative Chinese speech communities such as Beijing, Hong Kong, Macau, Taipei, Singapore, Shanghai, as well as Guangzhou, and Shenzhen. The contents are thus deliberately repetitive in most cases, represented by textual samples drawn from editorials, local and international news, cross-Taiwan Strait news, as well as news on finance, sports and entertainment. By 2023, more than 3 billion characters of news media texts have been filtered, of which 700 million characters have been processed and analyzed and have yielded an expanding Pan-Chinese dictionary of 2.5 million words from the Pan-Chinese printed media. Through rigorous analysis based on computational linguistic methodology, LIVAC has at the same time accumulated a large amount of accurate and meaningful statistical data on the Chinese language and on their diverse speech communities in the Pan-Chinese context, and the results show considerable and important long standing as well as evolving variations. The "Windows" approach is the most innovative feature of LIVAC and has enabled Pan-Chinese media texts to be quantitatively analyzed according to various attributes such as locations, time and subject domains. Thus, various types of comparative studies and applications in information technology as well as development of often related innovative applications have been possible. Moreover, LIVAC has allowed longitudinal developments to be taken into account, facilitating Key Word in Context (KWIC) search and comprehensive study of target words and their underlying concepts as well as linguistic structures over the past 25 years, based on the above mentioned variables of location, time and subject. Results from the extensive and accumulative data analysis contained in LIVAC have enabled the cultivation of textual databases of proper names, place names, organization names, new words, and bi-weekly and annual rosters of media figures. Related applications have included the establishment of verb and adjective databases, the formulation of sentiment indices, and related opinion mining, to measure and compare the popularity of global media figures in the Chinese media (LIVAC Annual Pan-Chinese Celebrity Rosters, later renamed as the Pan-Chinese Newsmaker Rosters). Notable among these are the decades long periodic reviews of the 25 years of annual pan-Chinese rosters since 2000 and compilation of new word databases (LIVAC Annual Pan-Chinese New Word Rosters). On this basis, the analysis of the emergence, diffusion and transformation of new words, and the publication of dictionaries of neologisms have been made possible. A recent focus is on the relative balance between disyllabic words and growing trisyllabic words in the Chinese language, and the comparative study of light verbs in three Chinese speech communities. as well as the link between the language use and use of language as a reflection of epochal change in China. A new LIVAC version 3.1 was launched in February 2024. == Corpus data processing == Accessing media texts, manual input, etc. Text unification including conversion from simplified to traditional Chinese characters, stored as Big5 and Unicode versions Automatic word segmentation Automatic alignment of parallel texts Manual verification, part-of-speech tagging Extraction of words and addition to regional sub-corpora Combination of regional sub-corpora to update the LIVAC corpus, and master lexical database == Labeling for data curation == Categories used include general terms and proper names, such as: general names, surnames, semi titles; geographical, organizations and commercial entities, etc.; time, prepositions, locations, etc.; stack-words; loanwords; case-word; numerals, etc. Construction of databases of proper names, place names, and specific terms, etc. Generate rosters: "new word rosters", "celebrity or media personality rosters", "place name rosters", compound words and matched words Other parts of speech tagging for sub-database, such as common nouns, numerals, numeral classifiers, different types of verbs, and of adjectives, pronouns, adverbs, prepositions, conjunctions, particles marking mood, onomatopoeia, interjection, etc. == Applications == Compilation of Pan-Chinese dictionaries or local dictionaries Information technology research, such as predictive Chinese text input for mobile phones, automatic speech to text conversion, opinion mining Comparative studies on linguistic and cultural developments in the Pan-Chinese regions, especially in a critical period of history in modern China. Language teaching and learning research, and speech-to-text conversion Customized service on linguistic research and lexical search for international corporations and government agencies The above applications are provided by the following functions: Word Segmentation Search Phrase Search Example Sentence Selection Multi-word Comparison Word Cloud
Read more →
Vector database

A vector database, vector store or vector search engine is a database that stores and retrieves embeddings of data in vector space. Vector databases typically implement approximate nearest neighbor algorithms so users can search for records semantically similar to a given input, unlike traditional databases which primarily look up records by exact match. Use-cases for vector databases include similarity search, semantic search, multi-modal search, recommendations engines, object detection, and retrieval-augmented generation (RAG). Vector embeddings are mathematical representations of data in a high-dimensional space. In this space, each dimension corresponds to a feature of the data, with the number of dimensions ranging from a few hundred to tens of thousands, depending on the complexity of the data being represented. Each data item is represented by one vector in this space. Words, phrases, or entire documents, as well as images, audio, and other types of data, can all be vectorized. These feature vectors may be computed from the raw data using machine learning methods such as feature extraction algorithms, word embeddings or deep learning networks. The goal is that semantically similar data items receive feature vectors close to each other. Vector retrieval can be combined with metadata filtering or lexical search to support filtered and hybrid retrieval workflows. == Techniques == Common techniques for similarity search on high-dimensional vectors include: Hierarchical Navigable Small World (HNSW) graphs Locality-sensitive hashing (LSH) and sketching Product quantization (PQ) Inverted files These techniques may also be combined in vector search systems. In recent benchmarks, HNSW-based implementations have been among the best performers. Conferences such as the International Conference on Similarity Search and Applications (SISAP) and the Conference on Neural Information Processing Systems (NeurIPS) have hosted competitions on vector search in large databases. == Applications == Vector databases are used in a wide range of machine learning applications including similarity search, semantic search, multi-modal search, recommendations engines, object detection, and retrieval-augmented generation. === Retrieval-augmented generation === An especially common use-case for vector databases is in retrieval-augmented generation (RAG), a method to improve domain-specific responses of large language models. The retrieval component of a RAG can be any search system, but is most often implemented as a vector database. Text documents describing the domain of interest are collected, and for each document or document section, a feature vector (known as an "embedding") is computed, typically using a deep learning network, and stored in a vector database along with a link to the document. Given a user prompt, the feature vector of the prompt is computed, and the database is queried to retrieve the most relevant documents. These are then automatically added into the context window of the large language model, and the large language model proceeds to create a response to the prompt given this context. == Implementations ==
Read more →
Image analysis

Image analysis or imagery analysis is the extraction of meaningful information from images; mainly from digital images by means of digital image processing techniques. Image analysis tasks can be as simple as reading bar coded tags or as sophisticated as identifying a person from their face. Computers are indispensable for the analysis of large amounts of data, for tasks that require complex computation, or for the extraction of quantitative information. On the other hand, the human visual cortex is an excellent image analysis apparatus, especially for extracting higher-level information, and for many applications — including medicine, security, and remote sensing — human analysts still cannot be replaced by computers. For this reason, many important image analysis tools such as edge detectors and neural networks are inspired by human visual perception models. == Digital == Digital Image Analysis or Computer Image Analysis is when a computer or electrical device automatically studies an image to obtain useful information from it. Note that the device is often a computer but may also be an electrical circuit, a digital camera or a mobile phone. It involves the fields of computer or machine vision, and medical imaging, and makes heavy use of pattern recognition, digital geometry, and signal processing. This field of computer science developed in the 1950s at academic institutions such as the MIT A.I. Lab, originally as a branch of artificial intelligence and robotics. It is the quantitative or qualitative characterization of two-dimensional (2D) or three-dimensional (3D) digital images. 2D images are, for example, to be analyzed in computer vision, and 3D images in medical imaging. The field was established in the 1950s—1970s, for example with pioneering contributions by Azriel Rosenfeld, Herbert Freeman, Jack E. Bresenham, or King-Sun Fu. == Techniques == There are many different techniques used in automatically analysing images. Each technique may be useful for a small range of tasks, however there still aren't any known methods of image analysis that are generic enough for wide ranges of tasks, compared to the abilities of a human's image analysing capabilities. Examples of image analysis techniques in different fields include: 2D and 3D object recognition, image segmentation, motion detection e.g. Single particle tracking, video tracking, optical flow, medical scan analysis, 3D Pose Estimation. == Deep learning == Since the early 2010s, deep learning methods have substantially advanced the field of image analysis. In 2012, a deep convolutional neural network (CNN) known as AlexNet achieved a significant reduction in error rates on the ImageNet large-scale image classification benchmark, demonstrating the effectiveness of deep learning for visual recognition tasks. Subsequent architectures such as ResNet introduced residual connections that enabled training of much deeper networks, further improving accuracy across image analysis tasks. Real-time object detection became practical with frameworks such as YOLO (You Only Look Once), which unified detection and classification into a single network pass. In 2020, the Vision Transformer (ViT) demonstrated that transformer architectures, originally developed for natural language processing, could achieve competitive results on image classification when applied directly to sequences of image patches. More recently, foundation models trained on large-scale datasets have enabled zero-shot generalisation across image analysis tasks. The Segment Anything Model (SAM), trained on over one billion masks, can segment arbitrary objects in images without task-specific fine-tuning. These advances have made image analysis techniques increasingly accessible through browser-based tools and open-source implementations. == Applications == The applications of digital image analysis are continuously expanding through all areas of science and industry, including: anatomy, allows for precise measurements, visualization, and statistical analysis of anatomical structures. assay micro plate reading, such as detecting where a chemical was manufactured. astronomy, such as calculating the size of a planet. automated species identification (e.g. plant and animal species) defense error level analysis filtering machine vision, such as to automatically count items in a factory conveyor belt. materials science, such as determining if a metal weld has cracks. medicine, such as detecting cancer in a mammography scan. metallography, such as determining the mineral content of a rock sample. microscopy, such as counting the germs in a swab. automatic number plate recognition; optical character recognition, such as automatic license plate detection. remote sensing, such as detecting intruders in a house, and producing land cover/land use maps. robotics, such as to avoid steering into an obstacle. security, such as detecting a person's eye color or hair color. == Object-based == Object-based image analysis (OBIA) involves two typical processes, segmentation and classification. Segmentation helps to group pixels into homogeneous objects. The objects typically correspond to individual features of interest, although over-segmentation or under-segmentation is very likely. Classification then can be performed at object levels, using various statistics of the objects as features in the classifier. Statistics can include geometry, context and texture of image objects. Over-segmentation is often preferred over under-segmentation when classifying high-resolution images. Object-based image analysis has been applied in many fields, such as cell biology, medicine, earth sciences, and remote sensing. For example, it can detect changes of cellular shapes in the process of cell differentiation.; it has also been widely used in the mapping community to generate land cover. When applied to earth images, OBIA is known as geographic object-based image analysis (GEOBIA), defined as "a sub-discipline of geoinformation science devoted to (...) partitioning remote sensing (RS) imagery into meaningful image-objects, and assessing their characteristics through spatial, spectral and temporal scale". The international GEOBIA conference has been held biannually since 2006. OBIA techniques are implemented in software such as eCognition or the Orfeo toolbox.
Read more →
Underwater computer vision

Underwater computer vision is a subfield of computer vision. In recent years, with the development of underwater vehicles ( ROV, AUV, gliders), the need to be able to record and process huge amounts of information has become increasingly important. Applications range from inspection of underwater structures for the offshore industry to the identification and counting of fishes for biological research. However, no matter how big the impact of this technology can be to industry and research, it still is in a very early stage of development compared to traditional computer vision. One reason for this is that, the moment the camera goes into the water, a whole new set of challenges appear. On one hand, cameras have to be made waterproof, marine corrosion deteriorates materials quickly and access and modifications to experimental setups are costly, both in time and resources. On the other hand, the physical properties of the water make light behave differently, changing the appearance of a same object with variations of depth, organic material, currents, temperature etc. == Applications == Seafloor survey Vehicle navigation and positioning Biological monitoring {possibly aquatic biomonitoring) Video mosaics as visual navigation maps Submarine pipeline inspection Wreckage visualization Maintenance of underwater structures Drowning detection systems == Medium differences == === Illumination === In air, light comes from the whole hemisphere on cloudy days, and is dominated by the sun. In water direct lighting comes from a cone about 96° wide above the scene. This phenomenon is called Snell's window. Artificial lighting can be used where natural light levels are insufficient and where the light path is too long to produce acceptable colour, as the loss of colour is a function of the total distance through water from the source to the camera lens port. === Light attenuation === Unlike air, water attenuates light exponentially. This results in hazy images with very low contrast. The main reasons for light attenuation are light absorption (where energy is removed from the light) and light scattering, by which the direction of light is changed. Light scattering can further be divided into forward scattering, which results in an increased blurriness and backward scattering that limits the contrast and is responsible for the characteristic veil of underwater images. Both scattering and attenuation are heavily influenced by the amount of organic matter dissolved or suspended in the water. Light attenuation in water is also a function of the wavelength. This means that different colours are attenuated at different rates, leading to colour degradation.with depth and distance. Red and orange light are attenuated faster, followed by yellows and greens. Blue is the least attenuated visible wavelength. === Artificial lighting === == Challenges == In high level computer vision, human structures are frequently used as image features for image matching in different applications. However, the sea bottom lacks such features, making it hard to find correspondences in two images. In order to be able to use a camera in the water, a watertight housing is required. However, refraction will happen at the water-glass and glass-air interface due to differences in density of the materials. This has the effect of introducing a non-linear image deformation. The motion of the vehicle presents another special challenge. Underwater vehicles are constantly moving due to currents and other phenomena. This introduces another uncertainty to algorithms, where small motions may appear in all directions. This can be specially important for video tracking. In order to reduce this problem image stabilization algorithms may be applied. == Relevant technology == === Image restoration === Image restoration< techniques are intended to model the degradation process and then invert it, obtaining the new image after solving. It is generally a complex approach that requires plenty of parameters that vary a lot between different water conditions. === Image enhancement === Image enhancement only tries to provide a visually more appealing image without taking the physical image formation process into account. These methods are usually simpler and less computational intensive. === Color correction === Various algorithms exist that perform automatic color correction. The UCM (Unsupervised Color Correction Method), for example, does this in the following steps: It firstly reduces the color cast by equalizing the color values. Then it enhances contrast by stretching the red histogram towards the maximum and finally saturation and intensity components are optimized. == Underwater stereo vision == It is usually assumed that stereo cameras have been calibrated previously, geometrically and radiometrically. This leads to the assumption that corresponding pixels should have the same color. However this can not be guaranteed in an underwater scene, because of dispersion and backscatter. However, it is possible to digitally model this phenomenon and create a virtual image with those effects removed == Other application fields == Imaging sonars have become more and more accessible and gained resolution, delivering better images. Sidescan sonars are used to produce complete maps of regions of the sea floor stitching together sequences of sonar images. However, sonar images often lack proper contrast and are degraded by artefacts and distortions due to noise, attitude changes of the AUV/ROV carrying the sonar or non uniform beam patterns. Another common problem with sonar computer vision is the comparatively low frame rate of sonar images.
Read more →
Mobile Passport Control

Mobile Passport Control (MPC) is a mobile app that enables eligible travelers entering the United States to submit their passport information and customs declaration form to Customs and Border Protection via smartphone or tablet and go through the inspections process using an expedited lane. It is available to "U.S. citizens, U.S. lawful permanent residents, Canadian B1/B2 citizen visitors and returning Visa Waiver Program travelers with approved ESTA". The app is available on iOS and Android devices and is operational at 34 US airports, 14 international airports offering preclearance facilities, and 4 seaports. The use of Mobile Passport Control operations have increased threefold from 2016 to 2017. == History == Mobile Passport Control operations were launched in Atlanta at the Hartsfield-Jackson International Airport in 2016 and is now available at 34 U.S. airports, 14 international airports that offer preclearance and 4 U.S. cruise ports. The Mobile Passport app is authorized by CBP and sponsored by the Airports Council International-North America, Boeing, and the Port of Everglades. Airside Mobile, Inc. secured a Series A funding of $6 million in the fall of 2017. == How it works == During the customs process at the Federal Inspection Service (FIS) area of a U.S. airport, travelers arriving from international locations typically wait in long lines before presenting passports and paperwork and verbally answering questions made by CBP officials. Eligible travelers who have downloaded the Mobile Passport app can expedite this process by submitting information regarding their passport and trip details, and a newly-taken selfie, via their mobile device to CBP officials, then access an expedited line. Mobile Passport Control users will be required to show their physical passport(s) and briefly talk to a CBP officer. == Locations == === US airports === Atlanta (ATL) Baltimore (BWI) Boston (BOS) Charlotte (CLT) Chicago (ORD) Dallas/Ft Worth (DFW) Denver (DEN) Detroit (DTW) as of 7/2024 Ft. Lauderdale (FLL) Honolulu (HNL) Houston (HOU and IAH) Kansas City (MCI) Las Vegas (LAS) Los Angeles (LAX) Miami (MIA) Minneapolis (MSP) New York (JFK) Newark (EWR) Oakland (OAK) Orlando (MCO) Palm Beach (PBI) Philadelphia (PHL) Phoenix (PHX) Pittsburgh (PIT) Portland (PDX) Sacramento (SMF) San Diego (SAN) San Francisco (SFO) San Jose (SJC) San Juan (SJU) Seattle (SEA) Tampa (TPA) Washington Dulles (IAD) === International Preclearance locations === Abu Dhabi (AUH) Aruba (AUA) Bermuda (BDA) Calgary (YYC) Dublin (DUB) Edmonton (YEG) Halifax (YHZ) Montreal (YUL) Nassau (NAS) Ottawa (YOW) Shannon (SNN) Toronto (YYZ) Vancouver (YVR) Winnipeg (YWG) Sepinggan (BPN) === Seaports === Fort Lauderdale (PEV) Miami (MSE) San Juan (PUE) West Palm Beach (WPB)
Read more →
PARRY

PARRY was an early example of a chatbot, implemented in 1972 by psychiatrist Kenneth Colby. == History == PARRY was written in 1972 by psychiatrist Kenneth Colby, then at Stanford University. While ELIZA was a simulation of a Rogerian therapist, PARRY attempted to simulate a person with paranoid schizophrenia. The program implemented a crude model of the behavior of a person with paranoid schizophrenia based on concepts, conceptualizations, and beliefs (judgements about conceptualizations: accept, reject, neutral). It also embodied a conversational strategy, and as such was a much more serious and advanced program than ELIZA. It was described as "ELIZA with attitude". PARRY was tested in the early 1970s using a variation of the Turing Test. A group of experienced psychiatrists analysed a combination of real patients and computers running PARRY through teleprinters. Another group of 33 psychiatrists were shown transcripts of the conversations. The two groups were then asked to identify which of the "patients" were human and which were computer programs. The psychiatrists were able to make the correct identification only 48 percent of the time — a figure consistent with random guessing. PARRY and ELIZA (also known as "the Doctor") interacted several times. The most famous of these exchanges occurred at the ICCC 1972, where PARRY and ELIZA were hooked up over ARPANET and responded to each other.
Read more →
Aikuma

Aikuma is an Android app for collecting speech recordings with time-aligned translations. The app includes a text-free interface for consecutive interpretation, designed for users who are not literate. The Aikuma won Grand Prize in the Open Source Software World Challenge (2013). == Name == Aikuma means "meeting place" in Usarufa, a Papuan language where this software was first used in 2012. == History == Aikuma was developed with sponsorship from the National Science Foundation, including a $101,501 (US) project, "to use mobile telephones to collect larger amounts of data on undocumented endangered languages than would never be possible through usual fieldwork." Aikuma and its modified version (Lig-Aikuma) have been used for collecting substantial quantities of audio in remote indigenous villages. A modified version of the app, called Lig-Aikuma, has been developed at the Université Grenoble Alpes (LIG laboratory) and implements new features such as elicitation of speech from text, images and videos. == Similar Software == Lingua Libre is an online collaborative project and tool by the Wikimedia France association, which can be used as a tool for Language Preservation. Lingua Libre enables to record words, phrases, or sentences of any language, oral (audio recording) or signed (video recording). It is a highly efficient method to record endangered languages since up to 1000 words can be recorded per hour. All the content is under Free License, and speakers of minority languages are encouraged to record their own dialects.
Read more →