AI For Business Isb

AI For Business Isb — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Whitelist

  A whitelist or allowlist is a list or register of entities that are being provided a particular privilege, service, mobility, access or recognition. Entities on the list will be accepted, approved and/or recognized. Whitelisting is the reverse of blacklisting, the practice of identifying entities that are denied, unrecognized, or ostracized. == Email whitelists == Spam filters often include the ability to "whitelist" certain sender IP addresses, email addresses or domain names to protect their email from being rejected or sent to a junk mail folder. These can be manually maintained by the user or system administrator - but can also refer to externally maintained whitelist services. === Non-commercial whitelists === Non-commercial whitelists are operated by various non-profit organizations, ISPs, and others interested in blocking spam. Rather than paying fees, the sender must pass a series of tests; for example, their email server must not be an open relay and have a static IP address. The operator of the whitelist may remove a server from the list if complaints are received. === Commercial whitelists === Commercial whitelists are a system by which an Internet service provider allows someone to bypass spam filters when sending email messages to its subscribers, in return for a pre-paid fee, either an annual or a per-message fee. A sender can then be more confident that their messages have reached recipients without being blocked, or having links or images stripped out of them, by spam filters. The purpose of commercial whitelists is to allow companies to reliably reach their customers by email. == Advertising whitelist == Many websites rely on ads as a source of revenue, but the use of ad blockers is increasingly common. Websites that detect an adblocker in use often ask for it to be disabled - or their site to be "added to the whitelist" - a standard feature of most adblockers. == Network whitelists == === LAN whitelists === A use for whitelists is in local area network (LAN) security. Many network admins set up MAC address whitelists, or a MAC address filter, to control who is allowed on their networks. This is used when encryption is not a practical solution or in tandem with encryption. However, it's sometimes ineffective because a MAC address can be faked. === IP whitelist === Firewalls can usually be configured to only allow data-traffic from/to certain (ranges of) IP-addresses. === Application whitelists === One approach in combating viruses and malware is to whitelist software which is considered safe to run, blocking all others. This is particularly attractive in a corporate environment, where there are typically already restrictions on what software is approved. Leading providers of application whitelisting technology include Bit9, Velox, McAfee, Lumension, ThreatLocker, Airlock Digital and SMAC. On Microsoft Windows, recent versions include AppLocker, which allows administrators to control which executable files are denied or allowed to execute. With AppLocker, administrators are able to create rules based on file names, publishers or file location that will allow certain files to execute. Rules can apply to individuals or groups. Policies are used to group users into different enforcement levels. For example, some users can be added to a report-only policy that will allow administrators to understand the impact before moving that user to a higher enforcement level. Linux systems typically have AppArmor and SE Linux features available which can be used to effectively block all applications which are not explicitly whitelisted, and commercial products are also available. On HP-UX introduced a feature called "HP-UX Whitelisting" on 11iv3 version. == Controversy regarding name == In 2018, a journal commentary on a report on predatory publishing was released making claims that "white" and "black" are racially charged terms that need to be avoided in instances such as "whitelist" and "blacklist". The premise of the journal is that "black" and "white" have negative and positive connotations respectively. It states that since "blacklisting" was first referred to during "the time of mass enslavement and forced deportation of Africans to work in European-held colonies in the Americas," the word is therefore related to race. There is no mention of "whitelist" and its origin or relation to race. This issue is most widely disputed in computing industries where "whitelist" and "blacklist" are prevalent (e.g. IP whitelisting). Despite the commentary nature of the journal, some companies and individuals in others have taken to replacing "whitelist" and "blacklist" with new alternatives such as "allow list" and "deny list". Those adopting this change consider using the "whitelist"/"blacklist" names as a code smell. Those that oppose these changes question its attribution to race, citing the same etymology quote that the 2018 journal uses. According to the remark, the term "blacklist" evolved from the term "black book" about a century ago. The term "black book" does not appear to have any etymology or sources that support racial associations, instead originating in the 1400s as a reference to "a list of people who had committed crimes or fallen out of favor with leaders", and popularized by King Henry VIII's literal use of a black book. Others also note the prevalence of positive and negative connotations to "white" and "black" in the Bible, predating attributions to skin tone and slavery. It wasn't until the 1960s Black Power movement that "Black" became a widespread word to refer to one's race as a person of color in America (alternate to African-American) lending itself to the argument that the negative connotation behind "black" and "blacklist" both predate attribution to race.

  Read more →
• 

  Audio mining

  Audio mining is a technique by which the content of an audio signal can be automatically analyzed and searched. It is most commonly used in the field of automatic speech recognition, where the analysis tries to identify any speech within the audio. The term audio mining is sometimes used interchangeably with audio indexing, phonetic searching, phonetic indexing, speech indexing, audio analytics, speech analytics, word spotting, and information retrieval. Audio indexing, however, is mostly used to describe the pre-process of audio mining, in which the audio file is broken down into a searchable index of words. == History == Academic research on audio mining began in the late 1970s in schools like Carnegie Mellon University, Columbia University, the Georgia Institute of Technology, and the University of Texas. Audio data indexing and retrieval began to receive attention and demand in the early 1990s, when multimedia content started to develop and the volume of audio content significantly increased. Before audio mining became the mainstream method, written transcripts of audio content were created and manually analyzed. == Process == Audio mining is typically split into four components: audio indexing, speech processing and recognition systems, feature extraction and audio classification. The audio will typically be processed by a speech recognition system in order to identify word or phoneme units that are likely to occur in the spoken content. This information may either be used immediately in pre-defined searches for keywords or phrases (a real-time "word spotting" system), or the output of the speech recognizer may be stored in an index file. One or more audio mining index files can then be loaded at a later date in order to run searches for keywords or phrases. The results of a search will normally be in terms of hits, which are regions within files that are good matches for the chosen keywords. The user may then be able to listen to the audio corresponding to these hits in order to verify if a correct match was found. === Audio Indexing === In audio, there is the main problem of information retrieval - there is a need to locate the text documents that contain the search key. Unlike humans, a computer is not able to distinguish between the different types of audios such as speed, mood, noise, music or human speech - an effective searching method is needed. Hence, audio indexing allows efficient search for information by analyzing an entire file using speech recognition. An index of content is then produced, bearing words and their locations done through content-based audio retrieval, focusing on extracted audio features. It is done through mainly two methods: Large Vocabulary Continuous Speech Recognition (LVCSR) and Phonetic-based Indexing. ==== Large Vocabulary Continuous Speech Recognizers (LVCSR) ==== In text-based indexing or large vocabulary continuous speech recognition (LVCSR), the audio file is first broken down into recognizable phonemes. It is then run through a dictionary that can contain several hundred thousand entries and matched with words and phrases to produce a full text transcript. A user can then simply search a desired word term and the relevant portion of the audio content will be returned. If the text or word could not be found in the dictionary, the system will choose the next most similar entry it can find. The system uses a language understanding model to create a confidence level for its matches. If the confidence level be below 100 percent, the system will provide options of all the found matches. ===== Advantages and disadvantages ===== The main draw of LVCSR is its high accuracy and high searching speed. In LVCSR, statistical methods are used to predict the likelihood of different word sequences, hence the accuracy is much higher than the single word lookup of a phonetic search. If the word can be found, the probability of the word spoken is very high. Meanwhile, while initial processing of audio takes a fair bit of time, searching is quick as just a simple test to text matching is needed. On the other hand, LVCSR is susceptible to common issues of speech recognition. The inherent random nature of audio and problems of external noise all affect the accuracies of text-based indexing. Another problem with LVCSR is its over reliance on its dictionary database. LVCSR only recognizes words that are found in their dictionary databases, and these dictionaries and databases are unable to keep up with the constant evolving of new terminology, names and words. Should the dictionary not contain a word, there is no way for the system to identify or predict it. This reduces the accuracy and reliability of the system. This is named the Out-of-vocabulary (OOV) problem. Audio mining systems try to cope with OOV by continuously updating the dictionary and language model used, but the problem still remains significant and has probed a search for alternatives. Additionally, due to the need to constantly update and maintain task-based knowledge and large training databases to cope with the OOV problem, high computational costs are incurred. This makes LVCSR an expensive approach to audio mining. ==== Phonetic-based Indexing ==== Phonetic-based indexing also breaks the audio file into recognizable phonemes, but instead of converting them to a text index, they are kept as they are and analyzed to create a phonetic-based index. The process of phonetic-based indexing can be split into two phases. The first phase is indexing. It begins by converting the input media into a standard audio representation format (PCM). Then, an acoustic model is applied to the speech. This acoustic model represents characteristics of both an acoustic channel (an environment in which the speech was uttered and a transducer through which it was recorded) and a natural language (in which human beings expressed the input speech). This produces a corresponding phonetic search track, or phonetic audio track (PAT), a highly compressed representation of the phonetic content of the input media. The second phase is searching. The user's search query term is parsed into a possible phoneme string using a phonetic dictionary. Then, multiple PAT files can be scanned at high speed during a single search for likely phonetic sequences that closely match corresponding strings of phonemes in the query term. ===== Advantages and disadvantages ===== Phonetic indexing is most attractive as it is largely unaffected by linguistic issues such as unrecognized words and spelling errors. Phonetic preprocessing maintains an open vocabulary that does not require updating. That makes it particularly useful for searching specialized terminology or words in foreign languages that do not commonly appear in dictionaries. It is also more effective for searching audio files with disruptive background noise and/or unclear utterances as it can compile results based on the sounds it can discern, and should the user wish to, they can search through the options until they find the desired item. Furthermore, in contrast to LVCSR, it can process audio files very quickly as there are very few unique phonemes between languages. However, phonemes cannot be effectively indexed like an entire word, thus searching on a phonetic-based system is slow. An issue with phonetic indexing is its low accuracy. Phoneme-based searches result in more false matches than text-based indexing. This is especially prevalent for short search terms, which have a stronger likelihood of sounding similar to other words or being part of bigger words. It could also return irrelevant results from other languages. Unless the system recognizes exactly the entire word, or understands phonetic sequences of languages, it is difficult for phonetic-based indexing to return accurate findings. === Speech processing and recognition system === Deemed as the most critical and complex component of audio mining, speech recognition requires the knowledge of human speech production system and its modeling. To correspond the Human speech production system, the electrical speech production system is developed to consist of: Speech generation Speech perception Voiced & unvoiced speech Model of human speech The electrical speech production system converts acoustic signal into corresponding representation of the spoken through the acoustic models in their software where all phonemes are represented. A statistical language model aids in the process by identifying how likely words are to follow each other in certain languages. Put together with a complex probability analysis, the speech recognition system is capable of taking an unknown speech signal and transcribing it into words based on the program's dictionary. ASR (automatic speech recognition) system includes: Acoustic analysis: input sound waveform is transformed into a feature Acoustic model: establishes relationship between speech signal and phonemes, pronunciation model and lang

  Read more →
• 

  YaDICs

  YaDICs is a program written to perform digital image correlation on 2D and 3D tomographic images. The program was designed to be both modular, by its plugin strategy and efficient, by it multithreading strategy. It incorporates different transformations (Global, Elastic, Local), optimizing strategy (Gauss-Newton, Steepest descent), Global and/or local shape functions (Rigid-body motions, homogeneous dilatations, flexural and Brazilian test models)... == Theoretical background == === Context === In solid mechanics, digital image correlation is a tool that allows to identify the displacement field to register a reference image (called herein fixed image) to images during an experiment (mobile image). For example, it is possible to observe the face of a specimen with a painted speckle on it in order to determine its displacement fields during a tensile test. Before the appearance of such methods, researchers usually used strain gauges to measure the mechanical state of the material but strain gauges only measure the strain on a point and don't allow to understand material with an heterogeneous behavior. One can obtain a full in plane strain tensor by derivation of the displacement fields. Many methods are based upon the optical flow. In fluid mechanics a similar method is used, called Particle Image Velocimetry (PIV); the algorithms are similar to those of DIC but it is impossible to ensure that the optical flow is conserved so a vast majority of the software used the normalized cross correlation metric. In mechanics the displacement or velocity fields are the only concern, registering images is just a side effect. There is another process called image registration using the same algorithms (on monomodal images) but where the goal is to register images and thereby identifying the displacement field is just a side effect. YaDICs uses the general principle of image registration with a particular attention to the displacement fields basis. === Image registration principle === YaDICs can be explained using the classical image registration framework: === Image registration general scheme === The common idea of image registration and digital image correlation is to find the transformation between a fixed image and a moving one for a given metric using an optimization scheme. While there are many methods to achieve such a goal, Yadics focuses on registering images with the same modality. The idea behind the creation of this software is to be able to process data that comes from a μ-tomograph; i.e.: data cube over 10003 voxels. With such a size it is not possible to use naive approach usually used in a two-dimensional context. In order to get sufficient performances OpenMP parallelism is used and data are not globally stored in memory. As an extensive description of the different algorithms is given in. === Sampling === Contrary to image registration, Digital Image Correlation targets the transformation, one wants to extracted the most accurate transformation from the two images and not just match the images. Yadics uses the whole image as a sampling grid: it is thus a total sampling. === Interpolator === It is possible to choose between bilinear interpolation and bicubic interpolation for the grey level evaluation at non integer coordinates. The bi-cubic interpolation is the recommended one. === Metrics === ==== Sum of squared differences (SSD) ==== The SSD is also known as mean squared error. The equation below defines the SSD metric: S S D ( μ , I F , I M ) = 1 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) 2 , {\displaystyle SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {1}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)^{2},} where I F {\displaystyle {\mathcal {I_{F}}}} is the fixed image, I M {\displaystyle {\mathcal {I_{M}}}} the moving one, Ω F {\displaystyle \Omega _{F}} the integration area | Ω F | {\displaystyle \left|\Omega _{F}\right|} the number of pi(vo)xels (cardinal) and T μ {\displaystyle {T}_{\mu }} the transformation parametrized by μ The transformation can be written as: T μ ( x ) = x + { Φ ( x ) } t { μ } . {\displaystyle T_{\mu }(x)=x+\left\{\Phi (x)\right\}^{t}\left\{\mu \right\}.} This metric is the main one used in the YaDICs as it works well with same modality images. One has to find the minimum of this metric ==== Normalized cross-correlation ==== The normalized cross-correlation (NCC) is used when one cannot assure the optical flow conservation; it happens in case of change of lighting or if particles disappear from the scene can occur in particle images velocimetry (PIV). The NCC is defined by: N C C ( μ , I F , I M ) = ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) ( I M ( T μ ( x i ) ) − I M ¯ ) ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) 2 ∑ x i ∈ Ω F ( I M ( T μ ( x i ) ) − I M ¯ ) 2 , {\displaystyle NCC(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)}{\sqrt {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)^{2}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)^{2}}}},} where I F ¯ {\displaystyle {\overline {\mathcal {I_{F}}}}} and I M ¯ {\displaystyle {\overline {\mathcal {I_{M}}}}} are the mean values of the fixed and mobile images. This metric is only used to find local translation in Yadics. This metric with translation transform can be solved using cross-correlation methods, which are non iterative and can be accelerated using Fast Fourier Transform . === Classification of transformations === There are three categories of parametrization: elastic, global and local transformation. The elastic transformations respect the partition of unity, there are no holes created or surfaces counted several times. This is commonly used in Image Registration by the use of B-Spline functions and in solid mechanics with finite element basis. The global transformations are defined on the whole picture using rigid body or affine transformation (which is equivalent to homogeneous strain transformation). More complex transformations can be defined such as mechanically based one. These transformations have been used for stress intensity factor identification by and for rod strain by. The local transformation can be considered as the same global transformation defined on several Zone Of Interest (ZOI) of the fixed image. ==== Global ==== Several global transforms have been implemented: Rigid and homogeneous (Tx,Ty,Rz in 2D; Tx,Ty,Tz,Rx,Ry,Rz,Exx,Eyy,Ezz,Eyz,Exz,Exy in 3D) Brazilian (Only in 2D), Dynamic Flexion, ==== Elastic ==== First-order quadrangular finite elements Q4P1 are used in Yadics. ===== Local ===== Every global transform can be used on a local mesh. === Optimization === The YaDICs optimization process follows a gradient descent scheme. The first step is to compute the gradient of the metric regarding the transform parameters ∂ S S D ( μ , I F , I M ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ∂ I M ( T μ ( x i ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ( ∂ T μ ( x i ) ∂ μ ) t ∂ I M ( T μ ( x i ) ) ∂ x {\displaystyle {\begin{array}{lcl}{\dfrac {\partial SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right){\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i})}{\partial \mu }}\\&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)\left({\dfrac {\partial {T}_{\mu }(x_{i})}{\partial \mu }}\right)^{t}{\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i}))}{\partial x}}\\\end{array}}} ==== Gradient method ==== Once the metric gradient has been computed, one has to find an optimization strategy The gradient method principle is explained below: μ k + 1 = μ k + α k d k {\displaystyle \mu _{k+1}=\mu _{k}+\alpha _{k}d_{k}} The gradient step can be constant or updated at every iteration. d k = − γ k ∂ C ( μ , I F , I M ) ∂ μ {\displaystyle d_{k}=-\gamma _{k}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}} , γ k {\displaystyle \gamma _{k}} allows one to choose between the following methods : γ k {\displaystyle \gamma _{k}} ⟹ {\displaystyle \Longrightarrow } steepest descent, γ k = [ ∂ C ( μ , I F , I M ) ∂ μ ∂ C ( μ , I F , I M ) ∂ μ t ] − 1 {\displaystyle \gamma _{k}=\left[{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}^{t}\right]^{-1}} ⟹ {\displaystyle \Longrightarrow } Gauss-Newto

  Read more →
• 

  Audio mining

  Audio mining is a technique by which the content of an audio signal can be automatically analyzed and searched. It is most commonly used in the field of automatic speech recognition, where the analysis tries to identify any speech within the audio. The term audio mining is sometimes used interchangeably with audio indexing, phonetic searching, phonetic indexing, speech indexing, audio analytics, speech analytics, word spotting, and information retrieval. Audio indexing, however, is mostly used to describe the pre-process of audio mining, in which the audio file is broken down into a searchable index of words. == History == Academic research on audio mining began in the late 1970s in schools like Carnegie Mellon University, Columbia University, the Georgia Institute of Technology, and the University of Texas. Audio data indexing and retrieval began to receive attention and demand in the early 1990s, when multimedia content started to develop and the volume of audio content significantly increased. Before audio mining became the mainstream method, written transcripts of audio content were created and manually analyzed. == Process == Audio mining is typically split into four components: audio indexing, speech processing and recognition systems, feature extraction and audio classification. The audio will typically be processed by a speech recognition system in order to identify word or phoneme units that are likely to occur in the spoken content. This information may either be used immediately in pre-defined searches for keywords or phrases (a real-time "word spotting" system), or the output of the speech recognizer may be stored in an index file. One or more audio mining index files can then be loaded at a later date in order to run searches for keywords or phrases. The results of a search will normally be in terms of hits, which are regions within files that are good matches for the chosen keywords. The user may then be able to listen to the audio corresponding to these hits in order to verify if a correct match was found. === Audio Indexing === In audio, there is the main problem of information retrieval - there is a need to locate the text documents that contain the search key. Unlike humans, a computer is not able to distinguish between the different types of audios such as speed, mood, noise, music or human speech - an effective searching method is needed. Hence, audio indexing allows efficient search for information by analyzing an entire file using speech recognition. An index of content is then produced, bearing words and their locations done through content-based audio retrieval, focusing on extracted audio features. It is done through mainly two methods: Large Vocabulary Continuous Speech Recognition (LVCSR) and Phonetic-based Indexing. ==== Large Vocabulary Continuous Speech Recognizers (LVCSR) ==== In text-based indexing or large vocabulary continuous speech recognition (LVCSR), the audio file is first broken down into recognizable phonemes. It is then run through a dictionary that can contain several hundred thousand entries and matched with words and phrases to produce a full text transcript. A user can then simply search a desired word term and the relevant portion of the audio content will be returned. If the text or word could not be found in the dictionary, the system will choose the next most similar entry it can find. The system uses a language understanding model to create a confidence level for its matches. If the confidence level be below 100 percent, the system will provide options of all the found matches. ===== Advantages and disadvantages ===== The main draw of LVCSR is its high accuracy and high searching speed. In LVCSR, statistical methods are used to predict the likelihood of different word sequences, hence the accuracy is much higher than the single word lookup of a phonetic search. If the word can be found, the probability of the word spoken is very high. Meanwhile, while initial processing of audio takes a fair bit of time, searching is quick as just a simple test to text matching is needed. On the other hand, LVCSR is susceptible to common issues of speech recognition. The inherent random nature of audio and problems of external noise all affect the accuracies of text-based indexing. Another problem with LVCSR is its over reliance on its dictionary database. LVCSR only recognizes words that are found in their dictionary databases, and these dictionaries and databases are unable to keep up with the constant evolving of new terminology, names and words. Should the dictionary not contain a word, there is no way for the system to identify or predict it. This reduces the accuracy and reliability of the system. This is named the Out-of-vocabulary (OOV) problem. Audio mining systems try to cope with OOV by continuously updating the dictionary and language model used, but the problem still remains significant and has probed a search for alternatives. Additionally, due to the need to constantly update and maintain task-based knowledge and large training databases to cope with the OOV problem, high computational costs are incurred. This makes LVCSR an expensive approach to audio mining. ==== Phonetic-based Indexing ==== Phonetic-based indexing also breaks the audio file into recognizable phonemes, but instead of converting them to a text index, they are kept as they are and analyzed to create a phonetic-based index. The process of phonetic-based indexing can be split into two phases. The first phase is indexing. It begins by converting the input media into a standard audio representation format (PCM). Then, an acoustic model is applied to the speech. This acoustic model represents characteristics of both an acoustic channel (an environment in which the speech was uttered and a transducer through which it was recorded) and a natural language (in which human beings expressed the input speech). This produces a corresponding phonetic search track, or phonetic audio track (PAT), a highly compressed representation of the phonetic content of the input media. The second phase is searching. The user's search query term is parsed into a possible phoneme string using a phonetic dictionary. Then, multiple PAT files can be scanned at high speed during a single search for likely phonetic sequences that closely match corresponding strings of phonemes in the query term. ===== Advantages and disadvantages ===== Phonetic indexing is most attractive as it is largely unaffected by linguistic issues such as unrecognized words and spelling errors. Phonetic preprocessing maintains an open vocabulary that does not require updating. That makes it particularly useful for searching specialized terminology or words in foreign languages that do not commonly appear in dictionaries. It is also more effective for searching audio files with disruptive background noise and/or unclear utterances as it can compile results based on the sounds it can discern, and should the user wish to, they can search through the options until they find the desired item. Furthermore, in contrast to LVCSR, it can process audio files very quickly as there are very few unique phonemes between languages. However, phonemes cannot be effectively indexed like an entire word, thus searching on a phonetic-based system is slow. An issue with phonetic indexing is its low accuracy. Phoneme-based searches result in more false matches than text-based indexing. This is especially prevalent for short search terms, which have a stronger likelihood of sounding similar to other words or being part of bigger words. It could also return irrelevant results from other languages. Unless the system recognizes exactly the entire word, or understands phonetic sequences of languages, it is difficult for phonetic-based indexing to return accurate findings. === Speech processing and recognition system === Deemed as the most critical and complex component of audio mining, speech recognition requires the knowledge of human speech production system and its modeling. To correspond the Human speech production system, the electrical speech production system is developed to consist of: Speech generation Speech perception Voiced & unvoiced speech Model of human speech The electrical speech production system converts acoustic signal into corresponding representation of the spoken through the acoustic models in their software where all phonemes are represented. A statistical language model aids in the process by identifying how likely words are to follow each other in certain languages. Put together with a complex probability analysis, the speech recognition system is capable of taking an unknown speech signal and transcribing it into words based on the program's dictionary. ASR (automatic speech recognition) system includes: Acoustic analysis: input sound waveform is transformed into a feature Acoustic model: establishes relationship between speech signal and phonemes, pronunciation model and lang

  Read more →
• 

  Kinematic chain

  In mechanical engineering, a kinematic chain is an assembly of rigid bodies connected by joints to provide constrained motion that is the mathematical model for a mechanical system. As the word chain suggests, the rigid bodies, or links, are constrained by their connections to other links. An example is the simple open chain formed by links connected in series, like the usual chain, which is the kinematic model for a typical robot manipulator. Mathematical models of the connections, or joints, between two links are termed kinematic pairs. Kinematic pairs model the hinged and sliding joints fundamental to robotics, often called lower pairs and the surface contact joints critical to cams and gearing, called higher pairs. These joints are generally modeled as holonomic constraints. A kinematic diagram is a schematic of the mechanical system that shows the kinematic chain. The modern use of kinematic chains includes analysis of Linkages (mechanical), compliance that arises from flexure joints in precision mechanisms, link compliance in compliant mechanisms and micro-electro-mechanical systems, and cable compliance in cable robotic and tensegrity systems. == Mobility formula == The degrees of freedom, or mobility, of a kinematic chain is the number of parameters that define the configuration of the chain. A system of n rigid bodies moving in space has 6n degrees of freedom measured relative to a fixed frame. This frame is included in the count of bodies, so that mobility does not depend on link that forms the fixed frame. This means the degree-of-freedom of this system is M = 6(N − 1), where N = n + 1 is the number of moving bodies plus the fixed body. Joints that connect bodies impose constraints. Specifically, hinges and sliders each impose five constraints and therefore remove five degrees of freedom. It is convenient to define the number of constraints c that a joint imposes in terms of the joint's freedom f, where c = 6 − f. In the case of a hinge or slider, which are one-degree-of-freedom joints, have f = 1 and therefore c = 6 − 1 = 5. The result in general where d {\displaystyle d} is the degrees of freedom for the mobility of a kinematic chain formed from n moving links and j joints each with freedom fi, i = 1, 2, …, j, is given by M = d n − ∑ i = 1 j ( d − f i ) = d ( N − 1 − j ) + ∑ i = 1 j f i {\displaystyle M=dn-\sum _{i=1}^{j}(d-f_{i})=d(N-1-j)+\sum _{i=1}^{j}f_{i}} Where N is the total number of links and includes the fixed link. Spacial linkages used d = 6 {\displaystyle d=6} and planar linkages use d = 3 {\displaystyle d=3} . This result is known as the Chebychev–Grübler–Kutzbach criterion. == Analysis of kinematic chains == The constraint equations of a kinematic chain couple the range of movement allowed at each joint to the dimensions of the links in the chain, and form algebraic equations that are solved to determine the configuration of the chain associated with specific values of input parameters, called degrees of freedom. The constraint equations for a kinematic chain are obtained using rigid transformations [Z] to characterize the relative movement allowed at each joint and separate rigid transformations [X] to define the dimensions of each link. In the case of a serial open chain, the result is a sequence of rigid transformations alternating joint and link transformations from the base of the chain to its end link, which is equated to the specified position for the end link. A chain of n links connected in series has the kinematic equations, [ T ] = [ Z 1 ] [ X 1 ] [ Z 2 ] [ X 2 ] ⋯ [ X n − 1 ] [ Z n ] , {\displaystyle [T]=[Z_{1}][X_{1}][Z_{2}][X_{2}]\cdots [X_{n-1}][Z_{n}],\!} where [T] is the transformation locating the end-link—notice that the chain includes a "zeroth" link consisting of the ground frame to which it is attached. These equations are called the forward kinematics equations of the serial chain. Kinematic chains of a wide range of complexity are analyzed by equating the kinematics equations of serial chains that form loops within the kinematic chain. These equations are often called loop equations. The complexity (in terms of calculating the forward and inverse kinematics) of the chain is determined by the following factors: Its topology: a serial chain, a parallel manipulator, a tree structure, or a graph. Its geometrical form: how are neighbouring joints spatially connected to each other? Explanation Two or more rigid bodies in space are collectively called a rigid body system. We can hinder the motion of these independent rigid bodies with kinematic constraints. Kinematic constraints are constraints between rigid bodies that result in the decrease of the degrees of freedom of rigid body system. == Synthesis of kinematic chains == The constraint equations of a kinematic chain can be used in reverse to determine the dimensions of the links from a specification of the desired movement of the system. This is termed kinematic synthesis. Perhaps the most developed formulation of kinematic synthesis is for four-bar linkages, which is known as Burmester theory. Ferdinand Freudenstein is often called the father of modern kinematics for his contributions to the kinematic synthesis of linkages beginning in the 1950s. His use of the newly developed computer to solve Freudenstein's equation became the prototype of computer-aided design systems. This work has been generalized to the synthesis of spherical and spatial mechanisms.

  Read more →
• 

  Kuwahara filter

  The Kuwahara filter is a non-linear smoothing filter used in image processing for adaptive noise reduction. Most filters that are used for image smoothing are linear low-pass filters that effectively reduce noise but also blur out the edges. However the Kuwahara filter is able to apply smoothing on the image while preserving the edges. It is named after Michiyoshi Kuwahara, Ph.D., who worked at Kyoto and Osaka Sangyo Universities in Japan, developing early medical imaging of dynamic heart muscle in the 1970s and 80s. == The Kuwahara operator == Suppose that I ( x , y ) {\displaystyle I(x,y)} is a grey scale image and that we take a square window of size 2 a + 1 {\displaystyle 2a+1} centered around a point ( x , y ) {\displaystyle (x,y)} in the image. This square can be divided into four smaller square regions Q i = 1 ⋯ 4 {\displaystyle Q_{i=1\cdots 4}} each of which will be Q i ( x , y ) = { [ x , x + a ] × [ y , y + a ] if i = 1 [ x − a , x ] × [ y , y + a ] if i = 2 [ x − a , x ] × [ y − a , y ] if i = 3 [ x , x + a ] × [ y − a , y ] if i = 4 {\displaystyle Q_{i}(x,y)={\begin{cases}\left[x,x+a\right]\times \left[y,y+a\right]&{\mbox{ if }}i=1\\\left[x-a,x\right]\times \left[y,y+a\right]&{\mbox{ if }}i=2\\\left[x-a,x\right]\times \left[y-a,y\right]&{\mbox{ if }}i=3\\\left[x,x+a\right]\times \left[y-a,y\right]&{\mbox{ if }}i=4\\\end{cases}}} where × {\displaystyle \times } is the cartesian product. Pixels located on the borders between two regions belong to both regions so there is a slight overlap between subregions. The arithmetic mean m i ( x , y ) {\displaystyle m_{i}(x,y)} and standard deviation σ i ( x , y ) {\displaystyle \sigma _{i}(x,y)} of the four regions centered around a pixel (x,y) are calculated and used to determine the value of the central pixel. The output of the Kuwahara filter Φ ( x , y ) {\displaystyle \Phi (x,y)} for any point ( x , y ) {\displaystyle (x,y)} is then given by Φ ( x , y ) = m i ( x , y ) {\textstyle \Phi (x,y)=m_{i}(x,y)} where i = a r g min j ⁡ σ j ( x , y ) {\displaystyle i=\operatorname {arg\min } _{j}\sigma _{j}(x,y)} . This means that the central pixel will take the mean value of the area that is most homogenous. The location of the pixel in relation to an edge plays a great role in determining which region will have the greater standard deviation. If for example the pixel is located on a dark side of an edge it will most probably take the mean value of the dark region. On the other hand, should the pixel be on the lighter side of an edge it will most probably take a light value. On the event that the pixel is located on the edge it will take the value of the more smooth, least textured region. The fact that the filter takes into account the homogeneity of the regions ensures that it will preserve the edges while using the mean creates the blurring effect. Similarly to the median filter, the Kuwahara filter uses a sliding window approach to access every pixel in the image. The size of the window is chosen in advance and may vary depending on the desired level of blur in the final image. Bigger windows typically result in the creation of more abstract images whereas small windows produce images that retain their detail. Typically windows are chosen to be square with sides that have an odd number of pixels for symmetry. However, there are variations of the Kuwahara filter that use rectangular windows. Additionally, the subregions do not need to overlap or have the same size as long as they cover all of the window. == Color images == For color images, the filter should not be performed by applying the filter to each RGB channel separately, and then recombining the three filtered color channels to form the filtered RGB image. The main problem with that is that the quadrants will have different standard deviations for each of the channels. For example, the upper left quadrant may have the lowest standard deviation in the red channel, but the lower right quadrant may have the lowest standard deviation in the green channel. This situation would result in the color of the central pixel to be determined by different regions, which might result in color artifacts or blurrier edges. To overcome this problem, for color images a slightly modified Kuwahara filter must be used. The image is first converted into another color space, the HSV color space. The modified filter then operates on only the "brightness" channel, the Value coordinate in the HSV model. The variance of the "brightness" of each quadrant is calculated to determine the quadrant from which the final filtered color should be taken from. The filter will produce an output for each channel which will correspond to the mean of that channel from the quadrant that had the lowest standard deviation in "brightness". This ensures that only one region will determine the RGB values of the central pixel. ImageMagick uses a similar approach, but using the Rec. 709 Luma as the brightness metric. === Julia Implementation === == Applications == Originally the Kuwahara filter was proposed for use in processing RI-angiocardiographic images of the cardiovascular system. The fact that any edges are preserved when smoothing makes it especially useful for feature extraction and segmentation and explains why it is used in medical imaging. The Kuwahara filter however also finds many applications in artistic imaging and fine-art photography due to its ability to remove textures and sharpen the edges of photographs. The level of abstraction helps create a desirable painting-like effect in artistic photographs especially in the case of the colored image version of the filter. These applications have known great success and have encouraged similar research in the field of image processing for the arts. Although the vast majority of applications have been in the field of image processing there have been cases that use modifications of the Kuwahara filter for machine learning tasks such as clustering. The Kuwahara filter has been implemented in CVIPtools. The Kuwahara filter is present as a shader node in Blender. == Drawbacks and restrictions == The Kuwahara filter despite its capabilities in edge preservation has certain drawbacks. At a first glance it is noticeable that the Kuwahara filter does not take into account the case where two regions have equal standard deviations. This is not often the case in real images since it is rather hard to find two regions with exactly the same standard deviation due to the noise that is always present. In cases where two regions have similar standard deviations the value of the center pixel could be decided at random by the noise in these regions. Again this would not be a problem if the regions had the same mean. However, it is not unusual for regions of very different means to have the same standard deviation. This makes the Kuwahara filter susceptible to noise. Different ways have been proposed for dealing with this issue, one of which is to set the value of the center pixel to ( m 1 + m 2 ) / 2 {\textstyle (m_{1}+m_{2})/2} in cases where the standard deviation of two regions do not differ more than a certain value D {\displaystyle D} . The Kuwahara filter is also known to create block artifacts in the images especially in regions of the image that are highly textured. These blocks disrupt the smoothness of the image and are considered to have a negative effect in the aesthetics of the image. This phenomenon occurs due to the division of the window into square regions. A way to overcome this effect is to take windows that are not rectangular(i.e. circular windows) and separate them into more non-rectangular regions. There have also been approaches where the filter adapts its window depending on the input image. == Extensions of the Kuwahara filter == The success of the Kuwahara filter has spurred an increase the development of edge-enhancing smoothing filters. Several variations have been proposed for similar use most of which attempt to deal with the drawbacks of the original Kuwahara filter. The "Generalized Kuwahara filter" proposed by P. Bakker considers several windows that contain a fixed pixel. Each window is then assigned an estimate and a confidence value. The value of the fixed pixel then takes the value of the estimate of the window with the highest confidence. This filter is not characterized by the same ambiguity in the presence of noise and manages to eliminate the block artifacts. The "Mean of Least Variance"(MLV) filter, proposed by M.A. Schulze also produces edge-enhancing smoothing results in images. Similarly to the Kuwahara filter it assumes a window of size 2 d − 1 × 2 d − 1 {\displaystyle 2d-1\times 2d-1} but instead of searching amongst four subregions of size d × d {\displaystyle d\times d} for the one with minimum variance it searches amongst all possible d × d {\displaystyle d\times d} subregions. This means the central pixel of the window will be assigned the mean of the one subregion out of a poss

  Read more →
• 

  Gapo

  Gapo is a Vietnamese social networking service based in Hanoi, Vietnam. Users are able to create a personal profile and share text, photos and videos with others on the platform. Users can also use Gapo for live streaming, instant messaging, blogging, and online payments. Gapo was launched in July 2019 by Hà Trung Kiên and Duong Vi Khoa. == History == Gapo was founded in response to calls for Vietnam's Communist-led government to produce a domestic alternative to social media giants like Facebook and Google. Gapo officially launched on July 23, 2019 at an event in Hanoi. The company received 500 billion đồng (US$22 million) in funding from technology corporation G-Group to be utilized in the first phase of development. They also partnered with Sony Music Entertainment to provide music content to its services. == Features == Gapo features a news feed for posting content, livestreaming, instant messaging, and blogging. It also allows users to pay online and access public services. == Reception == Within two days of launch, Gapo received about 200,000 registrations. By September 2019, the user base increased to one million. Upon launch, Gapo experienced significant technical difficulties. Users complained about the inability to sign up for a new account and said that certain functions were not available for use at launch. This issue caused Gapo to temporarily suspend their services in order to perform upgrades and bug fixes. Gapo relaunched the next day, though many users reported that the access speed decreased. The mobile app also received mixed reviews from users in both the App Store and the Google Play Store, with an average rating of 3.1 and 3.5, respectively. Most users found the app to be a knockoff of Facebook, although some users praised the app for being locally developed. === Expert opinions on platform viability === Le Hong Hiep of the ISEAS - Yusof Ishak Institute was doubtful that a Vietnamese-owned social network service could be as powerful as a foreign-based service, stating that Vietnam might not be able to develop a viable social media network to compete with the likes of Facebook or Google. Others, like blogger Ann Chi, said that, due to local players complying with local censorship policy, there is a chance that locals might not trust Gapo and other local services in light of possible surveillance. Regarding the targeted user base figure for the end of 2019 and 2021, experts cautioned that the company might need an additional trillion đồng of funding to reach its planned user base targets. In response, the company stated that Gapo was never meant to compete with Facebook, but instead noted that the main difference between Gapo and Facebook is that Gapo provides a personalized user experience through customization. == Censorship == Gapo has the right to censor posts and news that are deemed offensive and inaccurate by users or not approved by the censorship curators.

  Read more →
• 

  Automated storage and retrieval system

  An automated storage and retrieval system (ASRS or AS/RS) consists of a variety of computer-controlled systems for automatically placing and retrieving loads from defined storage locations. Automated storage and retrieval systems (AS/RS) are typically used in applications where: There is a very high volume of loads being moved into and out of storage Storage density is important because of space constraints No value is added in this process (no processing, only storage and transport) Accuracy is critical because of potential expensive damages to the load An AS/RS can be used with standard loads as well as nonstandard loads, meaning that each standard load can fit in a uniformly-sized volume; for example, the film canisters in the image of the Defense Visual Information Center are each stored as part of the contents of the uniformly sized metal boxes, which are shown in the image. Standard loads simplify the handling of a request of an item. In addition, audits of the accuracy of the inventory of contents can be restricted to the contents of an individual metal box, rather than undergoing a top-to-bottom search of the entire facility, for a single item. They can also be used in self storage places. == Overview == AS/RS systems are designed for automated storage and retrieval of parts and items in manufacturing, distribution, retail, wholesale and institutions. They first originated in the 1960s, initially focusing on heavy pallet loads but with the evolution of the technology the handled loads have become smaller. The systems operate under computerized control, maintaining an inventory of stored items. Retrieval of items is accomplished by specifying the item type and quantity to be retrieved. The computer determines where in the storage area the item can be retrieved from and schedules the retrieval. It directs the proper automated storage and retrieval machine (SRM) to the location where the item is stored and directs the machine to deposit the item at a location where it is to be picked up. A system of conveyors and or automated guided vehicles is sometimes part of the AS/RS system. These take loads into and out of the storage area and move them to the manufacturing floor or loading docks. To store items, the pallet or tray is placed at an input station for the system, the information for inventory is entered into a computer terminal and the AS/RS system moves the load to the storage area, determines a suitable location for the item, and stores the load. As items are stored into or retrieved from the racks, the computer updates its inventory accordingly. The benefits of an AS/RS system include reduced labor for transporting items into and out of inventory, reduced inventory levels, more accurate tracking of inventory, and space savings. Items are often stored more densely than in systems where items are stored and retrieved manually. Within the storage, items can be placed on trays or hang from bars, which are attached to chains/drives in order to move up and down. The equipment required for an AS/RS include a storage & retrieval machine (SRM) that is used for rapid storage and retrieval of material. SRMs are used to move loads vertically or horizontally, and can also move laterally to place objects in the correct storage location. The trend towards Just In Time production often requires sub-pallet level availability of production inputs, and AS/RS is a much faster way of organizing the storage of smaller items next to production lines. The Material Handling Institute of America (MHIA), the non-profit trade association for the material handling world, and its members have categorised AS/RS into two primary segments: Fixed Aisle and Carousels/Vertical Lift Modules (VLMs). Both sets of technologies provide automated storage and retrieval for parts and items, but use different technologies. Each technology has its unique set of benefits and disadvantages. Fixed Aisle systems are characteristically larger systems whereas carousels and Vertical Lift Modules are used individually or grouped, but in small to medium-sized applications. A fixed-aisle AS/R machine (stacker crane) is one of two main designs: single-masted or double masted. Most are supported on a track and ceiling guided at the top by guide rails or channels to ensure accurate vertical alignment, although some are suspended from the ceiling. The 'shuttles' that make up the system travel between fixed storage shelves to deposit or retrieve a requested load (ranging from a single book in a library system to a several ton pallet of goods in a warehouse system). The entire unit moves horizontally within an aisle, while the shuttles are able to elevate up to the necessary height to reach the load, and can extend and retract to store or retrieve loads that are several positions deep in the shelving. A semi-automated system can be achieved by utilizing only specialized shuttles within an existing rack system. Another AS/RS technology is known as shuttle technology. In this technology the horizontal movement is made by independent shuttles each operating on one level of the rack while a lift at a fixed position within the rack is responsible for the vertical movement. By using two separate machines for these two axes the shuttle technology is able to provide higher throughput rates than stacker cranes. Storage and Retrieval Machines pick up or drop off loads to the rest of the supporting transportation system at specific stations, where inbound and outbound loads are precisely positioned for proper handling. In addition, there are several types of Automated Storage & Retrieval Systems (AS/RS) devices called Unit-load AS/RS, Mini-load AS/RS, Mid-Load AS/RS, Vertical Lift Modules (VLMs), Horizontal Carousels and Vertical Carousels. These systems are used either as stand-alone units or in integrated workstations called pods or systems. These units are usually integrated with various types of pick to light systems and use either a microprocessor controller for basic usage or inventory management software. These systems are ideal for increasing space utilization up to 90%, productivity levels by 90%, accuracy to 99.9%+ levels and throughput up to 750 lines per hour/per operator or more depending on the configuration of the system. == Horizontal carousels == Robotic Inserter/Extractor devices can be used for horizontal carousels. The robotic device is positioned in the front or rear of up to three horizontal carousels tiered high. The robot grabs the tote required in the order and often replenishes at the same time to speed up throughput. The tote(s) are then delivered to a conveyor, which routes it to a work station for picking or replenishing. Up to eight transactions per minute per unit can be done. Totes or containers up to 36" x 36" x 36" can be used in a system. On a simplistic level, horizontal carousels are also often used as "rotating shelving". With simple "fetch" command, items are brought to the operator and otherwise wasted space is eliminated. AS/RS Applications: Most applications of AS/RS technology have been associated with warehousing and distribution operations. An AS/RS can also be used to store raw materials and work in process in manufacturing. Three application areas can be distinguished for AS/RS: (1) Unit load storage and handling, (2) Order picking, and (3) Work in process storage. Unit load storage and retrieval applications are represented by unit load AS/RS and deep-lane storage systems. These kinds of applications are commonly found in warehousing for finishing goods in a distribution center, rarely in manufacturing. Deep-lane systems are used in the food industry. As described above, order picking involves retrieving materials in less than full unit load quantities. Minilpass, man-on board, and items retrieval systems are used for this second application area. Work in process storage is a more recent application of automated storage technology. While it is desirable to minimize the amount of work in process, WIP is unavoidable and must be effectively managed. Automated storage systems, either automated storage/retrieval systems or carousel systems, represent an efficient way to store materials between processing steps, particularly in batch and job shop production. In high production, work in process is often carried between operations by conveyor system, which this serve both storage and transport functions. === Inventory Category-specific AS/RS === Each inventory category—raw materials, work-in-process, and finished goods—requires its own specialized Automated Storage and Retrieval System (AS/RS). Particularly for work-in-process (WIP) inventories, due to variations in manufacturing processes, the AS/RS systems are significantly different in design and function, tailored specifically to match unique handling, storage, and retrieval requirements === Installed applications === Installed applications of this technology can be wide-ranging. In some librarie

  Read more →
• 

  Creately

  Creately is a SaaS visual collaboration tool with diagramming and design capabilities designed by Cinergix. The application is mostly known for creating flowcharts, organization charts, project charts, UML diagrams, mind maps, and other business visuals. == History == The initial beta version of Creately was released by Chandika Jayasundara. Hiraash Thawfeek, Nick Foster and Charanjit Singh joined the project in the same year. Chandika Jayasundara is CEO of Cinergix. The headquarters of the company is located at Mentone, Victoria, Australia. == Features and reception == Creately provides predefined templates and diagram elements for incorporating in the projects. It provides drag and drop feature with which both predefined and custom made shapes can be included to build the desired diagram while the same workspace can be shared with multiple persons for collaboration. Some experts have reviewed the application by commenting on its lacking in accessible integration options as its downside. The company claims Creately to have integration feature with Slack, Confluence while not having the integration with Zapier and OneDrive yet. It is compatible with Google Drive and Dropbox. The software is available as both freemium and paid option.

  Read more →
• 

  Biorobotics

  Biorobotics is an interdisciplinary science that combines the fields of biomedical engineering, cybernetics, and robotics to develop new technologies that integrate biology with mechanical systems to develop more efficient communication, alter genetic information, and create machines that imitate biological systems. == Cybernetics == Cybernetics focuses on the communication and system of living organisms and machines that can be applied and combined with multiple fields of study such as biology, mathematics, computer science, engineering, and much more. This discipline falls under the branch of biorobotics because of its combined field of study between biological bodies and mechanical systems. Studying these two systems allows for advanced analysis on the functions and processes of each system as well as the interactions between them. === History === Cybernetic theory is a concept that has existed for centuries, dating back to the era of Plato where he applied the term to refer to the "governance of people". The term cybernetique is seen in the mid-1800s used by physicist André-Marie Ampère. The term cybernetics was popularized in the late 1940s to refer to a discipline that touched on, but was separate, from established disciplines, such as electrical engineering, mathematics, and biology. === Science === Cybernetics is often misunderstood because of the breadth of disciplines it covers. In the early 20th century, it was coined as an interdisciplinary field of study that combines biology, science, network theory, and engineering. Today, it covers all scientific fields with system related processes. The goal of cybernetics is to analyze systems and processes of any system or systems in an attempt to make them more efficient and effective. === Applications === Cybernetics is used as an umbrella term so applications extend to all systems related scientific fields such as biology, mathematics, computer science, engineering, management, psychology, sociology, art, and more. Cybernetics is used amongst several fields to discover principles of systems, adaptation of organisms, information analysis and much more. == Genetic engineering == Genetic engineering is a field that uses advances in technology to modify biological organisms. Through different methods, scientists are able to alter the genetic material of microorganisms, plants and animals to provide them with desirable traits. For example, making plants grow bigger, better, and faster. Genetic engineering is included in biorobotics because it uses new technologies to alter biology and change an organism's DNA for their and society's benefit. === History === Although humans have modified genetic material of animals and plants through artificial selection for millennia (such as the genetic mutations that developed teosinte into corn and wolves into dogs), genetic engineering refers to the deliberate alteration or insertion of specific genes to an organism's DNA. The first successful case of genetic engineering occurred in 1973 when Herbert Boyer and Stanley Cohen were able to transfer a gene with antibiotic resistance to a bacterium. === Science === There are three main techniques used in genetic engineering: The plasmid method, the vector method and the biolistic method. ==== Plasmid method ==== This technique is used mainly for microorganisms such as bacteria. Through this method, DNA molecules called plasmids are extracted from bacteria and placed in a lab where restriction enzymes break them down. As the enzymes do this, some develop a rough edge that resembles that of a staircase which is considered 'sticky' and capable of reconnecting. These 'sticky' molecules are inserted into another bacteria where they will connect to the DNA rings with the altered genetic material. ==== Vector method ==== The vector method is considered a more precise technique than the plasmid method as it involves the transfer of a specific gene instead of a whole sequence. In the vector method, a specific gene from a DNA strand is isolated through restriction enzymes in a laboratory and is inserted into a vector. Once the vector accepts the genetic code, it is inserted into the host cell where the DNA will be transferred. ==== Biolistic method ==== The biolistic method is typically used to alter the genetic material of plants. This method embeds the desired DNA with a metallic particle such as gold or tungsten in a high speed gun. The particle is then bombarded into the plant. Due to the high velocities and the vacuum generated during bombardment, the particle is able to penetrate the cell wall and inserts the new DNA into the cell. === Applications === Genetic engineering has many uses in the fields of medicine, research and agriculture. In the medical field, genetically modified bacteria are used to produce drugs such as insulin, human growth hormones and vaccines. In research, scientists genetically modify organisms to observe physical and behavioral changes to understand the function of specific genes. In agriculture, genetic engineering is extremely important as it is used by farmers to grow crops that are resistant to herbicides and to insects such as BTCorn. == Bionics == Bionics is a medical engineering field and a branch of biorobotics consisting of electrical and mechanical systems that imitate biological systems, such as prosthetics and hearing aids. It's a portmanteau that combines biology and electronics. === History === The history of bionics goes as far back in time as ancient Egypt. A prosthetic toe made out of wood and leather was found on the foot of a mummy. The time period of the mummy corpse was estimated to be from around the fifteenth century B.C. Bionics can also be witnessed in ancient Greece and Rome. Prosthetic legs and arms were made for amputee soldiers. In the early 16th century, a French military surgeon by the name of Ambroise Pare became a pioneer in the field of bionics. He was known for making various types of upper and lower prosthetics. One of his most famous prosthetics, Le Petit Lorrain, was a mechanical hand operated by catches and springs. During the early 19th century, Alessandro Volta further progressed bionics. He set the foundation for the creation of hearing aids with his experiments. He found that electrical stimulation could restore hearing by inserting an electrical implant to the saccular nerve of a patient's ear. In 1945, the National Academy of Sciences created the Artificial Limb Program, which focused on improving prosthetics since there were a large number of World War II amputee soldiers. Since this creation, prosthetic materials, computer design methods, and surgical procedures have improved, creating modern-day bionics. === Science === ==== Prosthetics ==== The important components that make up modern-day prosthetics are the pylon, the socket, and the suspension system. The pylon is the internal frame of the prosthetic that is made up of metal rods or carbon-fiber composites. The socket is the part of the prosthetic that connects the prosthetic to the person's missing limb. The socket consists of a soft liner that makes the fit comfortable, but also snug enough to stay on the limb. The suspension system is important in keeping the prosthetic on the limb. The suspension system is usually a harness system made up of straps, belts or sleeves that are used to keep the limb attached. The operation of a prosthetic could be designed in various ways. The prosthetic could be body-powered, externally-powered, or myoelectrically powered. Body-powered prosthetics consist of cables attached to a strap or harness, which is placed on the person's functional shoulder, allowing the person to manipulate and control the prosthetic as he or she deems fit. Externally-powered prosthetics consist of motors to power the prosthetic and buttons and switches to control the prosthetic. Myoelectrically powered prosthetics are new, advanced forms of prosthetics where electrodes are placed on the muscles above the limb. The electrodes will detect the muscle contractions and send electrical signals to the prosthetic to move the prosthetic. The downside to this type of prosthetic is that if the sensors are not placed correctly on the limb then the electrical impulses will fail to move the prosthetic. TrueLimb is a specific brand of prosthetics that uses myoelectrical sensors which enable a person to have control of their bionic limb. ==== Hearing aids ==== Four major components make up the hearing aid: the microphone, the amplifier, the receiver, and the battery. The microphone takes in outside sound, turns that sound to electrical signals, and sends those signals to the amplifier. The amplifier increases the sound and sends that sound to the receiver. The receiver changes the electrical signal back into sound and sends the sound into the ear. Hair cells in the ear will sense the vibrations from the sound, convert the vibrations into nerve signals, and send it to the brain so

  Read more →
• 

  Deluxe Paint

  Deluxe Paint, often referred to as DPaint, is a bitmap graphics editor created by Dan Silva for Electronic Arts and published for the then-new Amiga 1000 in November 1985. A series of updated versions followed, some of which were ported to other platforms. An MS-DOS release with support for the 256 color VGA standard became popular for creating pixel graphics in video games in the 1990s. Author Dan Silva previously worked on the Cut & Paste word processor (1984), also from Electronic Arts. == History == Deluxe Paint began as an in-house art development tool called Prism. As author Dan Silva added features to Prism, it was developed as a showcase product to coincide with the Amiga's debut in 1985. Upon release, it was quickly embraced by the Amiga community and became the de facto graphics (and later animation) editor for the platform. Amiga manufacturer Commodore International later commissioned EA to create version 4.5 AGA to bundle with the new Advanced Graphics Architecture chipset (A1200, A4000) capable Amigas. Version 5 was the last release after Commodore's bankruptcy in 1994. Early versions of Deluxe Paint were available in protected and non copy-protected versions, the latter retailing for a slightly higher price. The copy protection scheme was later dropped. Deluxe Paint was first in a series of products from the Electronic Arts Tools group—then later moved to the ICE (for Interactivity, Creativity, and Education) group—which included such Amiga programs as Deluxe Music Construction Set (preceded by Music Construction Set for the Apple II), Deluxe Video, and the Studio series of paint programs for the Mac. With the development of Deluxe Paint, EA introduced the ILBM and ANIM file format standards for graphics. While widely used on the Amiga, these formats never gained widespread end user acceptance on other platforms, but were heavily used by game development companies. Deluxe Paint was used by LucasArts to make graphics for their adventure games such as The Secret of Monkey Island, and the name of a particular filename used to store the main protagonist Guybrush Threepwood was probably at the origin of his peculiar name. One of the main artist developer of the game, Mark Ferrari, in an interview for The Making of Monkey Island 30th Anniversary Documentary remembers that "there was a pulldown menu in DPaint called brushes, so character sprites were referred to as brushes", and the male protagonist was simply "the guy.brush" until the artist Steve Purcell suggested to take the very name "Guybrush". The author Ron Gilbert remembers that the PC DOS version of the file was named "guybrush.bbm". == Versions == === Amiga === Deluxe Paint I was released in 1985. A major feature was animation by using color cycling. The Amiga natively supports indexed color, where a pixel's color value does not carry any RGB hue information but instead is an index to a color palette (a collection of unique color values). By adjusting the color value in the palette, all pixels with that palette value change simultaneously in the image or animation, creating cyclic movement in the image. In the Christmas demo files on the Deluxe Paint I disk, this kind of animation (which is toggled by pressing the tab key) is used to depict falling snowflakes, a blinking Christmas tree, and a roaring fire in the fireplace. In 1986, Deluxe Paint II was introduced, which added many convenient features such as pattern and gradient fill, which could be selected by right-clicking on a fill tool. An effects menu with e.g. perspective transformation was also added. The screen format could now be changed from a dedicated selection page. Deluxe Paint III appeared in 1989 and added support for Extra Halfbrite. New editing modes allowed one to stencil certain colors to protect them, so it is possible to e.g. paint a landscape from front to back, with the foreground protected by a stencil. A major new feature of Deluxe Paint III was the ability to create cel-like animation, and animbrushes (1MB of RAM is needed for animation). These let the user pick up a section of an animation as an "animbrush", which can then be placed onto the canvas while it animates. Deluxe Paint III was one of the first paint programs to support animbrushes. This is similar to copy and paste, except one can pick up more than one image. Deluxe Paint IV (introduced in 1991), which did not include Silva as the lead programmer, offered significant new features like non-bitplane-indexed Hold-and-Modify support for creating images with up to 4,096 colors. Animation support was improved by adding a light table, i.e. onion skinning, and AnimBrush morphing. The color mixer was now a HAM region at the bottom of the screen (instead of a floating window as before) and allowed mixing adjacent colors similar to a real palette. Deluxe Paint 4.5 AGA appeared the following year, addressing the stability issues and providing support for the new A1200 and A4000 AGA machines and a revamped screen mode interface. It appeared in both standalone and Commodore-bundled versions. The final release, Deluxe Paint V, in 1995, supported true 24-bit RGB images. However, using only the AGA native chipset, the 24-bit RGB color was only held in computer memory, the on-screen image was displayed in HAM8 (18-bit color). === Apple IIGS === DeluxePaint II for the Apple IIGS was developed by Brent Iverson and released in 1987. === MS-DOS === Deluxe Paint II for MS-DOS was released in 1988, It required MS-DOS 2.0 and 640 kB of RAM. It supports CGA, EGA, MCGA, VGA, Hercules and Tandy IBM PC-compatible graphic cards. Deluxe Paint II Enhanced was released in 1989, requiring MS-DOS 2.11 and 640 kB of RAM. It supports resolutions up to 800x600 pixels with 256 colors. Deluxe Paint II Enhanced 2.0, released in 1994, was the most successful MS-DOS version, and was compatible with PC Paintbrush PCX image files. The MS-DOS conversion was done by Brent Iverson with the enhanced features by Steve Shaw. It supports CGA, EGA, MCGA, VGA, Hercules, Tandy, and Amstrad video cards, as well as early Super VGA video cards enabling it to support up to 800 × 600 with 256 (from 262,144) colors and 1024 × 768 with 16 colors. The sister product Deluxe Paint Animation (only for 320×200 pixels and 256 colors) was widely used, especially in video game development. === Atari ST === Deluxe Paint ST was developed by ArtisTech Development, published by Electronic Arts, and was released in 1990. It supports the Atari STE 4096 color palette and animated graphics. Features advertised for the Atari ST version include 3D perspective, design your own fonts, mirror symmetry, multi-color airbrushing & animations, printing up to poster size, split-screen magnification with variable zoom, and working on animations (including multiple animations). == Workflow == "[" and "]" hotkeys step through the indexed palette, turning indexed-pixel-painting into a fast two-handed mouse+keys process, and the right mouse button paints with the background color. For example, transparency is obtained as simply as selecting a background color index (a single right click on the palette GUI to change). colors could be locked from editing by use of a stencil (a list of color indices whose pixels should not be altered in the image data) and simple color-cycling animations could be created using contiguous entries in the palette. This was easy to change the hue and tone of a section of the image by altering the corresponding colors in the palette. (The specific section needed to use a dedicated part of the palette for this technique to work.) Brushes can be cut from the background by using the box, freehand, or polygon selection tools. They can then be used in the same manner as any other brush or pen. This functionality is simpler to use than the "stamp" tool of Photoshop or Alpha Channels as provided in later programs. Brushes can be rotated and scaled, even in 3D. After a brush is selected, it appears attached to the mouse cursor, providing an exact preview of what will be drawn. This allows precise pixel positioning of brushes. Animations stored in IFF ANIM format are delta compressed making animations both smaller and faster to playback. == Reception == Compute! criticized the documentation of the first release of DeluxePaint as inadequate, but stated that "DeluxePaint is a visual arts program of immense scope and flexibility". In later versions the documentation was much improved; for instance DeluxePaint IV came with a 300-page manual. Deluxe Paint was a hit for EA. The main line of the series, particularly installments one to three, has won a total of at least nine awards from independent publications and organizations, including three Amiga-specific awards. Deluxe Paint III also won Commodore International's Enterprise and Vision award in 1990, becoming the first software to win the award, for what the company's judges believed to be best utilizing the Amiga's graphical capabilities. Deluxe Pai

  Read more →
• 

  Robomart

  Robomart is an American technology company headquartered in Santa Monica, California that builds autonomous smart shops for cafes, ice cream parlors, and quick-service restaurants. The company’s white label platform gives retailers the option to expand their footprint at a significantly lower cost than traditional brick-and-mortar real-estate. Robomarts are equipped with a proprietary checkout-free system, temperature controlled compartments, sensors for autonomous operation, and external cameras for added security. The company licenses its technology and white label applications to retailers who manage their fleet of stores and deploy them to their consumers’ locations. After consumers have taken goods from the robomart, their order is automatically calculated, their card on file is charged and they are sent a receipt. The company has announced partnerships with Unilever, Mars, and Fatty Mart. == History == Robomart was founded by Ali Ahmed, Tigran Shahverdyan, and Emad Suhail Rahim. The company debuted at CES 2018 where it unveiled its concept of a self-driving store. At GITEX 2018 the company presented its first functional prototype of a fully driverless Robomart. At the 2019 Consumer Electronics Show the company demonstrated the technology behind its autonomous stores and checkout-free shopping experience. In January 2019, Robomart announced its first partnership with U.S. grocery chain Stop & Shop to test its driverless stores. In December 2020, Robomart deployed the Pharmacy Robomart in a trial in West Hollywood. In June 2021, the company launched its commercial service with a fleet of Pharmacy and Snacks Robomarts operating within West Hollywood and Central Hollywood. In August 2023, Robomart announced a $2 million seed round, putting its to-date funding at $3.4 million. == Partnerships == In September 2019, Robomart partnered with Avery Dennison to source the RFID tags used to enable its checkout-free shopping experience. In December 2020, Robomart partnered with Zeeba Vans to provide vehicles for its growing fleet. In June 2021, Robomart partnered with REEF Technology to provide inventory management and restocking services. In addition, REEF's Light Speed grocery division serves as the first merchant selling products through Robomart. == Products == The company currently offers three Robomart types. The frozen Robomart that stocks ice cream, the refrigerated Robomart that stocks perishable foods, and the ambient Robomart that stocks shelf-stable goods.

  Read more →
• 

  Logogen model

  The logogen model of 1969 is a model of speech recognition that uses units called "logogens" to explain how humans comprehend spoken or written words. Logogens are a vast number of specialized recognition units, each able to recognize one specific word. This model provides for the effects of context on word recognition. == Overview == The word logogen can be traced back to the Greek-language word logos, which means "word", and genus, which means "birth". British scientist John Morton's logogen model was designed to explain word recognition using a new type of unit known as a logogen. A critical element of this theory is the involvement of lexicons, or specialized aspects of memory that include semantic and phonemic information about each item that is contained in memory. A given lexicon consists of many smaller, abstract items known as logogens. Logogens contain a variety of properties about given word such as their appearance, sound, and meaning. Logogens do not store words within themselves, but rather they store information that is specifically necessary for retrieval of whatever word is being searched for. A given logogen will become activated by psychological stimuli or contextual information (words) that is consistent with the properties of that specific logogen and when the logogen's activation level rises to or above its threshold level, the pronunciation of the given word is sent to the output system. Certain stimuli can affect the activation levels of more than one word at a time, usually involving words that are similar to one another. When this occurs, whichever of the words' activation levels reaches the threshold level, it is that word that is then sent to the output system with the subject remaining unaware of any partially excited logogens. This assumption was made by Marslen-Wilson and Welch (1978), who added to the model some assumptions of their own in order to account for their experimental results. They also assumed that the analysis of phonetic input can only become available to other parts of the system by process of how the input affects the logogen system. Finally, Marslen-Wilson and Welch assume that the first syllable of a given word will increase the activation level of a given logogen more than those of the latter syllables, which supported the data found at the time. == Analysis == The logogen model can be used to help linguists explain particular occurrences in the human language. The most-helpful application of the model is to show how one accesses words and their meanings in the lexicon. The word-frequency effect is best explained by the logogen model in that words (or logogens) that have a higher frequency (or are more common) have a lower threshold. This means that they require less perceptual power in the brain to be recognized and decoded from the lexicon and are recognized faster than those words that are less common. Also, with high-frequency words, the recovery from lowering the item's threshold is less fulfilled compared to low-frequency words so less sensory information is needed for that particular item's recognition. There are ways to lower thresholds, such as repetition and semantic priming. Also, each time a word is encountered through these methods, the threshold for that word is temporarily lowered partially because of its recovering ability. This model also conveys that specific concrete words are recalled better because they use images and logogens, whereas abstract words are not as easily recalled well because they only use logogens, hence showing the difference in thresholds between these two types of words. At the time of its conception, Morton's logogen model was one of the most influential models in springing up other parallel word access models and served as the essential basis for these subsequent models. Morton's model also strongly influenced other contemporary theories on lexical access. However, despite the advantages that the logogen theory presents, it also displays some negative facets. First and foremost, the logogen model does not explain all occurrences in language, such as the introduction of new words or non-words into a person's lexicon. Also, because of the distinctive model application, it may vary in its effectiveness in different languages. == Criticisms == While this model does a reasonable job of understanding the underlying semantics of many aspects in psycholinguistics, there are some flaws that have been pointed out in the logogen model. It has been argued that the prior stimulus patterns that have been seen in the logogen theory are not centrally localized in the logogen itself but are actually distributed throughout the different pathways over which the stimulus is being processed. What this directs at is that the notion and proliferation of logogens was due to modality. In essence, the logogen is unnecessary in the idea of attaining the title of being a recognition unit because of the variety of pathways that it is open to, not just logogens. Another criticism has been that this model essentially ignores larger and more critical structures in language and phonetics such as the different syntactic rules or grammatical construction that innately exists in language. Since this model overtly limits itself to the scope of lexical access then this model is seen as biased and misunderstood. To many psychologists, the logogen model does not meet the functional or representational adequacy that a theory should include to sufficiently comprehend language. Also, another criticism is that the logogen theory was supposed to predict that stimulus degradation should affect priming and word frequency in humans. However, many psychologists have conducted studies and researched the model to show that only priming and not word frequency is interacted with stimulus degradation. Priming is supposed to deteriorate a stimulus because it postulates that the semantic characteristics of previously known words are fed back into the detector of a person which in turn raises the threshold of related items. In word frequency, stimulus degradation is supposed to occur because it postulates that familiar words have lower thresholds than their low-frequency counterparts. However, in studies, priming is the only structure that does show observable and notable stimulus decadence. Even though the logogen theory has many unfilled holes, Morton was a revolutionary of his field whose speculation and research has opened up a remarkable era of psycholinguistics. == Other models to consider == cohort model – This model was proposed by Marslen-Wilson and was designed specifically to account for auditory word recognition. It works by breaking the word down and states that when a word is heard all words that begin with the first sound of the target word are activated. This set of words is considered the cohort. Once the first cohort has been activated, the other information, or sounds in the word narrow down the choices. The person recognizes the word when you are left with a single choice; this is considered the "recognition point". checking model – This model was developed by Norris in 1986. In this particular model, he took the approach that any word that partially matches the input is analyzed and checked to see if it fits with the context of the situation. interactive-activation model – This model is considered a connectionist model. Proposed by McClelland and Rumelhart in the 1981 to 1982 period, it is based around nodes, which are visual features, and positions of letters within a given word. They also act as word detectors which have inhibitory and excitatory connections between them. This model starts with first letter and suggests that all the words with that first letter are activated at first and then going through the word one can determine what the word is they are looking at. The main principle is that mental phenomena can be described by interconnected networks of simple units. verification model – The model was developed by Curtis Becker in 1970. The main idea is that a small number of candidates that are activated in parallel are subject to a serial-verification process. This model starts the word-recognition process with a basic representation of the stimulus. Then, sensory trace, consisting of line features is used to activate word detectors. When an acceptable number of detectors are activated these are used to generate a search set. These items are drawn from the lexicon on the basis of similarity to the sensory trace, which help with the identity of the stimulus. Then, in a serial process the candidates are compared to the representation of the sensory-trace input. == Related concepts == word frequency – This is the belief that the speed and accuracy with which a word is recognized is related to how frequently the word occurs in our language. Each logogen has a threshold (for identification) and words with higher frequencies have lower thresholds. Words with higher freq

  Read more →
• 

  Dating app

  An online dating application, commonly known as a dating app, is an online dating service presented through a mobile phone application. These apps often take advantage of a smartphone's GPS location capabilities, always on-hand presence, and access to mobile wallets. These apps aim to speed up the online dating process of sifting through potential dating partners, chatting, flirting, and potentially meeting or becoming romantically involved. Online dating apps are now mainstream in the United States. As of 2017, online dating (which included both apps and other online dating services) was the principal method by which new couples in the U.S. met. The percentage of couples meeting online is predicted to increase to 70% by 2040. == Origins == The first computerized dating service was launched in 1964, the St. James Computer Dating Service, which became known as Com-Pat. The first U.S. dating service that used computerized match making was Operation Match. It required men and women to complete a questionnaire and was launched in 1965. Operation Match inspired the methodology of Dateline, which became popular in the 1970s and 1980s. Match.com was launched in 1995 and turned computerized match making into a profitable business. Grindr targeted gay and bisexual men at launch. Tinder, launched in 2012, led to a growth of online dating applications by both new providers and existing online dating services that expanded into the mobile app market. == Usage by demographic group == Online dating applications typically target a younger demographic group, though some apps, like Senior Match and Silver Singles are geared toward the 50 and up demographic. In 2016, almost 50% of people knew of someone who use the services or had met their loved one through the service. After the iPhone launch in 2007, online dating data has mushroomed as application usage increased. In 2005, only 10% of 18-24 year olds reported to have used online dating services; this number quickly grew to over 27%, making this target demographic the largest number of users for most applications. When Pew Research Center conducted a study in 2016, they found that 59% of U.S. adults agreed that online dating is a good way to meet people compared to 44% in 2005. This explosion in usage can be explained by the increased use of smartphones. By the end of 2022, it is expected there will be 413 million active users of online dating services worldwide. A 2023 Pew Research Center survey of 6,034 American adults found that 30% had ever used an online dating site or app, including 53% of those aged 18 to 29, 37% of those aged 30 to 49, and 17% of those aged 50 and over. Lesbian, gay and bisexual respondents reported using dating apps at nearly twice the rate of straight respondents (51% versus 28%), and 36% of divorced, separated or widowed adults had used one, compared with 16% of married adults. The increased use of smartphones by those 65 and older has also driven that population to the use dating apps. The Pew Research Center found that usage increase by 8 points since last surveyed in 2012. A study in 2021 found that more than one-third of seniors have dated in the past 5 years, and roughly one-third of those dating seniors have turned to dating apps. During the COVID-19 pandemic, Morning Consult found that more Americans were using online dating apps than ever before. In one survey in April 2020, the company discovered that 53% of U.S. adults who use online dating apps have been using them more during the pandemic. As of February 2021, that share increased to 71 percent. Research using Hofstede's cultural dimensions theory has indicated that norms about online dating applications tend to differ across cultures. A study published in the Journal of Creative Communications looked into the relationships between dating-app advertisements from over 51 countries and the cultural dimensions of these countries. The results revealed that dating-app advertisements appealed to multiple cultural needs, including the needs for relationships, friendship, entertainment, sex, status, design and identity. The use of these appeals was found to be 'congruent with ... the individualism/collectivism and uncertainty avoidance cultural dimensions.' == Popular applications == Following Tinder's success, other companies released dating applications. Raya was released in 2015 as a membership-based dating app, allowing entrance only through referrals, which was marketed as a dating app for celebrities. In early 2026, Hily surpassed Bumble to become the third most-used dating application in the United States and the fifth highest-grossing overall, driven largely by growing popularity among Generation Z users, while remaining behind Tinder and Hinge, both owned by Match Group. A number of dating apps have been created targeting adherents of particular religions seeking partners of the same religion, such as Muzmatch for Muslims, Christian Mingle, SALT, and Christian Connection for Christians, and JSwipe and JDate for Jews. === VR Dating === VR Dating is an application of Social VR where people can exist, collaborate, and perform various activities together. Virtual reality apps use virtual and augmented realities to make the dating experience more lifelike and more effective, as well as allow people to expand what is already possible in the world of online dating. There are several online platforms of VR Dating. The VR dating app Nevermet is the VR equivalent of Tinder, where people can search and find on dates. However, instead of actual real-life pictures, users will update pictures of virtual selves and will be interacting with avatars rather than real faces. Flirtual is a self-contained social VR app that serves to match users who then decide where and how to meet in VR. Flirtual hosts speed dating and social events in VR. == Effects on dating == The usage of online dating applications can have both advantages and disadvantages: === Advantages === Many of the applications provide personality tests for matching or use algorithms to match users. These factors enhance the possibility of users getting matched with a compatible candidate. Users are in control; they are provided with many options so there are enough matches that fit their particular type. Users can simply choose to not match the candidates that they know they are not interested in. Narrowing down options is easy. Once users think they are interested, they are able to chat and get to know the potential candidate. This form of communication can reduce the time, cost, and uncertainty often associated with traditional dating methods. Online dating offers convenience; people want dating to work around their schedules. Online dating can also increase self-confidence; even if users get rejected, they know there are hundreds of other candidates that will want to match with them so they can simply move on to the next option. In fact, 60% of U.S. adults agree that online dating is a good way to meet people and 66% say they have gone on a real date with someone they met through an application. Today, 5% of married Americans or Americans in serious relationships said they met their significant other online. The 39% of online dating users (representing 12% of all U.S. adults) say they have been in a committed relationship or married someone they met on a dating site or app. ==== Rejection sensitive individuals ==== Individuals high in rejection sensitivity are more likely to use online dating applications. As they tend to expect, perceive and overreact to rejection, rejection sensitive individuals struggle with traditional dating. Online dating applications allow for them to better reveal their true selves, potentially increasing their dating success. Online dating applications also obscure rejection cues, alleviating the rejection-related distress experienced by rejection sensitive individuals. ==== Anxiously attached individuals ==== Individuals high in attachment anxiety are also more likely to use online dating applications. While they harbour negative self-views, anxiously attached individuals are also more eager to enter and commit to relationships. Online dating applications allow for them to present "an authentic yet ideal version of themselves", mitigating their tendencies to view themselves as undesirable. This increases their romantic confidence, and potentially alleviates their anxiety when searching for a romantic partner. === Disadvantages === Sometimes having too many options can be overwhelming. With so many options available, users can get lost in their choices and end up spending too much time looking for the "perfect" candidate instead of using that time to start a real relationship. In addition, the algorithms and matching systems put in place may not always be as accurate as users think. There is no perfect system that can match two people's personalities perfectly every time. Communication online also lacks the physical chemistry aspec

  Read more →
• 

  Logistics automation

  Logistics automation is the application of computer software or automated machinery to logistics operations in order to improve its efficiency. Typically this refers to operations within a warehouse or distribution center, with broader tasks undertaken by supply chain engineering systems and enterprise resource planning systems. Logistics automation systems can powerfully complement the facilities provided by these higher level computer systems. The focus on an individual node within a wider logistics network allows systems to be highly tailored to the requirements of that node. == Components == Logistics automation systems comprise a variety of hardware and software components: Fixed machinery Automated storage and retrieval systems, including: Cranes serve a rack of locations, allowing many levels of stock to be stacked vertically, and allowing for higher storage densities and better space utilization than alternatives. In systems produced by Amazon Robotics, automated guided vehicles move items to a human picker. Conveyors: Containers can enter automated conveyors in one area of the warehouse and, either through hard-coded rules or data input, be moved to a selected destination. Vertical carousels based on the paternoster lift system or using space optimization, similar to vending machines, but on a larger scale. Sortation systems: similar to conveyors but typically with higher capacity and able to divert containers more quickly. Typically used to distribute high volumes of small cartons to a large set of locations. Industrial robots: four- to six-axis industrial robots, e.g. palletizing robots, are used for palletizing, depalletizing, packaging, commissioning and order picking. Typically all of these will automatically identify and track containers using barcodes or, increasingly, RFID tags. Motion check weighers may be used to reject cases or individual products that are under or over their specified weight. They are often used in kitting conveyor lines to ensure all pieces belonging in the kit are present. Mobile technology Radio data terminals: these are handheld or truck-mounted terminals which connect by radio to logistics automation software and provide instructions to operators moving throughout the warehouse. Many also have barcode scanners to allow identification of containers more quickly and accurately than manual keyboard entry. Software Integration software: this provides overall control of the automation machinery and allows cranes to be connected to conveyors for seamless stock movements. Operational control software: provides low-level decision-making, such as where to store incoming containers, and where to retrieve them when requested. Business control software: provides higher-level functionality, such as identification of incoming deliveries/stock, scheduling order fulfillment, and assignment of stock to outgoing trailers. == Benefits == A typical warehouse or distribution center will receive stock of a variety of products from suppliers and store these until the receipt of orders from customers, whether individual buyers (e.g. mail order), retail branches (e.g. chain stores), or other companies (e.g. wholesalers). A logistics automation system may provide the following: Automated goods in processes: Incoming goods can be marked with barcodes and the automation system notified of the expected stock. On arrival, the goods can be scanned and thereby identified, and taken via conveyors, sortation systems, and automated cranes into an automatically assigned storage location. Automated goods retrieval for orders: On receipt of orders, the automation system is able to immediately locate goods and retrieve them to a pick-face location. Automated dispatch processing: Combining knowledge of all orders placed at the warehouse the automation system can assign picked goods into dispatch units and then into outbound loads. Sortation systems and conveyors can then move these onto the outgoing trailers. If needed, repackaging to ensure proper protection for further distribution or to change the package format for specific retailers/customers. A complete warehouse automation system can drastically reduce the workforce required to run a facility, with human input required only for a few tasks, such as picking units of product from a bulk packed case. Even here, assistance can be provided with equipment such as pick-to-light units. Smaller systems may only be required to handle part of the process. Examples include automated storage and retrieval systems, which simply use cranes to store and retrieve identified cases or pallets, typically into a high-bay storage system which would be unfeasible to access using fork-lift trucks or any other means. The use of Automatic Guided Vehicles maximizes the output compared to humans since they can do repetitive tasks for long hours and with least to no supervision. An AGV is built and programmed for precision and accuracy thereby reducing the chances of errors in a warehouse, especially when dealing with fragile goods. == Automation software == Software or cloud-based SaaS solutions are used for logistics automation which helps the supply chain industry in automating the workflow as well as management of the system. Knowledge @ Wharton staff writers noted in 2011 that some manufacturers and retailers were weathering the Great Recession "by signing up for pay-as-you-go logistics services available through the Internet 'cloud'". They identified the benefits and reduced costs which came from sharing information about shipments with suppliers, hauliers and end users. There is little generalized software available in this market. This is because there is no rule to generalize the system as well as work flow even though the practice is more or less the same. Most of the commercial companies do use one or the other of the custom solutions. But there are various software solutions that are being used within the departments of logistics. There are a few departments in Logistics, namely: Conventional Department, Container Department, Warehouse, Marine Engineering, Heavy Haulage, etc. Software used in these departments Conventional department : CVT software / CTMS software. Container Trucking: CTMS software Warehouse : WMS/WCS Improving Effectiveness of Logistics Management Logistical Network Information Transportation Sound Inventory Management Warehousing, Materials Handling & Packaging

  Read more →