AI For Business Isb

AI For Business Isb — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Highway network

  In machine learning, the Highway Network was the first working very deep feedforward neural network with hundreds of layers, much deeper than previous neural networks. It uses skip connections modulated by learned gating mechanisms to regulate information flow, inspired by long short-term memory (LSTM) recurrent neural networks. The advantage of the Highway Network over other deep learning architectures is its ability to overcome or partially prevent the vanishing gradient problem, thus improving its optimization. Gating mechanisms are used to facilitate information flow across the many layers ("information highways"). Highway Networks have found use in text sequence labeling and speech recognition tasks. In 2014, the state of the art was training deep neural networks with 20 to 30 layers. Stacking too many layers led to a steep reduction in training accuracy, known as the "degradation" problem. In 2015, two techniques were developed to train such networks: the Highway Network (published in May), and the residual neural network, or ResNet (December). ResNet behaves like an open-gated Highway Net. == Model == The model has two gates in addition to the H ( W H , x ) {\displaystyle H(W_{H},x)} gate: the transform gate T ( W T , x ) {\displaystyle T(W_{T},x)} and the carry gate C ( W C , x ) {\displaystyle C(W_{C},x)} . The latter two gates are non-linear transfer functions (specifically sigmoid by convention). The function H {\displaystyle H} can be any desired transfer function. The carry gate is defined as: C ( W C , x ) = 1 − T ( W T , x ) {\displaystyle C(W_{C},x)=1-T(W_{T},x)} while the transform gate is just a gate with a sigmoid transfer function. == Structure == The structure of a hidden layer in the Highway Network follows the equation: y = H ( x , W H ) ⋅ T ( x , W T ) + x ⋅ C ( x , W C ) = H ( x , W H ) ⋅ T ( x , W T ) + x ⋅ ( 1 − T ( x , W T ) ) {\displaystyle {\begin{aligned}y=H(x,W_{H})\cdot T(x,W_{T})+x\cdot C(x,W_{C})\\=H(x,W_{H})\cdot T(x,W_{T})+x\cdot (1-T(x,W_{T}))\end{aligned}}} == Related work == Sepp Hochreiter analyzed the vanishing gradient problem in 1991 and attributed to it the reason why deep learning did not work well. To overcome this problem, Long Short-Term Memory (LSTM) recurrent neural networks have residual connections with a weight of 1.0 in every LSTM cell (called the constant error carrousel) to compute y t + 1 = F ( x t ) + x t {\textstyle y_{t+1}=F(x_{t})+x_{t}} . During backpropagation through time, this becomes the residual formula y = F ( x ) + x {\textstyle y=F(x)+x} for feedforward neural networks. This enables training very deep recurrent neural networks with a very long time span t. A later LSTM version published in 2000 modulates the identity LSTM connections by so-called "forget gates" such that their weights are not fixed to 1.0 but can be learned. In experiments, the forget gates were initialized with positive bias weights, thus being opened, addressing the vanishing gradient problem. As long as the forget gates of the 2000 LSTM are open, it behaves like the 1997 LSTM. The Highway Network of May 2015 applies these principles to feedforward neural networks. It was reported to be "the first very deep feedforward network with hundreds of layers". It is like a 2000 LSTM with forget gates unfolded in time, while the later Residual Nets have no equivalent of forget gates and are like the unfolded original 1997 LSTM. If the skip connections in Highway Networks are "without gates," or if their gates are kept open (activation 1.0), they become Residual Networks. The residual connection is a special case of the "short-cut connection" or "skip connection" by Rosenblatt (1961) and Lang & Witbrock (1988) which has the form x ↦ F ( x ) + A x {\displaystyle x\mapsto F(x)+Ax} . Here the randomly initialized weight matrix A does not have to be the identity mapping. Every residual connection is a skip connection, but almost all skip connections are not residual connections. The original Highway Network paper not only introduced the basic principle for very deep feedforward networks, but also included experimental results with 20, 50, and 100 layers networks, and mentioned ongoing experiments with up to 900 layers. Networks with 50 or 100 layers had lower training error than their plain network counterparts, but no lower training error than their 20 layers counterpart (on the MNIST dataset, Figure 1 in ). No improvement on test accuracy was reported with networks deeper than 19 layers (on the CIFAR-10 dataset; Table 1 in ). The ResNet paper, however, provided strong experimental evidence of the benefits of going deeper than 20 layers. It argued that the identity mapping without modulation is crucial and mentioned that modulation in the skip connection can still lead to vanishing signals in forward and backward propagation (Section 3 in ). This is also why the forget gates of the 2000 LSTM were initially opened through positive bias weights: as long as the gates are open, it behaves like the 1997 LSTM. Similarly, a Highway Net whose gates are opened through strongly positive bias weights behaves like a ResNet. The skip connections used in modern neural networks (e.g., Transformers) are dominantly identity mappings.

  Read more →
• 

  Unfold (app)

  Unfold is a mobile application that allows users to create social media content using a variety of templates and other tools. It was founded in 2018 by Alfonso Cobo and Andy McCune. It enables users to add photos, video, and text with a variety of tools. In 2019, Unfold was acquired by Squarespace. == History == In January 2017, Alfonso Cobo was studying at Parsons School of Design when he realized there was no software or app that could create a portfolio of his work on an iPad. Cobo created an app called Portfolio, a basic version of a portfolio layout app, and the first one to exist for iPad. He launched it in 2017. After launching the first version of Portfolio, Cobo realized the more popular market and use case was on mobile. Around that time, Instagram was launching Stories. As a result, Cobo pivoted the app away from portfolios and instead focused on an app to showcase one's stories. Cobo later contacted Andy McCune, founder of social media account Earth, to collaborate with Unfold. Unfold also partnered with various companies to create custom templates. These include Equinox, Tommy Hilfiger, NARS, Billboard Music Awards, and Product Red. Unfold also launched a collection of Product Red templates to help eliminate HIV/AIDS in several African countries. In 2019, Squarespace acquired Unfold. The Unfold app has been downloaded over 60 million times and has been used to create over 1 billion Instagram stories. == Features == With Unfold, users can utilize hundreds of templates to make social content for social media platforms such as Instagram, Snapchat, and Facebook. The free app offers users basic templates and standard fonts, filters, and stickers, and there are also premium templates available for a monthly subscription. With Unfold+ and Unfold Pro (previously Unfold for Brands), users can access premium templates and tools, as well as upload custom brand assets and fonts. In 2020, Unfold launched Bio Sites, which allows users to link to multiple sites and platforms.

  Read more →
• 

  NIS2 Directive

  The Directive (EU) 2022/2555, commonly known as NIS2 is a directive of the European Union aimed at protecting digital infrastructure, in particular critical infrastructure. It broadened the sectors covered by EU network and information security rules and updated incident reporting and oversight compared to the NIS1. Member States were required to transpose NIS2 by 17 October 2024, and the earlier NIS Directive was repealed on 18 October 2024. Only 23 Member States have fully implemented the measures contained with the NIS Directive. Infringement proceedings against them to enforce the Directive have not taken place, and they are not expected to take place in the near future. This failed implementation has led to the fragmentation of cybersecurity capabilities across the EU, with differing standards, incident reporting requirements and enforcement requirements being implemented in different Member States. From the EFTA countries (to April 2026) only Liechtenstein has fully transposed the NIS2 Directive. While the EFTA commission is conducting preparations to transpose the directive into its legislation. == National implementations == === Czech Republic === It is implemented through the Act No. 264/2025 Coll. also called Zákon o kybernetické bezpečnosti (Cybersecurity law) and through another five implementing regulations. The transposing legislation came into force on November 1st, 2025. === Germany === It is implemented through the Gesetz zur Umsetzung der NIS-2-Richtlinie und zur Regelung wesentlicher Grundzüge des Informationssicherheitsmanagements in der Bundesverwaltung. === Ireland === It is implemented through the National Cyber Security Bill. === The Netherlands === It is implemented through the Cyberbeveiligingswet (Cbw). === Slovakia === It is implemented through via an amendment of the Act No. 69/2018 Coll. also called Zákon o kybernetickej bezpečnosti a o zmene a doplnení niektorých zákonov (Law on Cybersecurity and change and amendment of certain laws). It came into force on November 1st, 2025. === Spain === It is implemented through the Esquema Nacional de Seguridad (ENS).

  Read more →
• 

  Integrated test facility

  An integrated test facility (ITF) creates a fictitious entity in a database to process test transactions simultaneously with live input. ITF can be used to incorporate test transactions into a normal production run of a system. Its advantage is that periodic testing does not require separate test processes. However, careful planning is necessary, and test data must be isolated from production data. Moreover, ITF validates the correct operation of a transaction in an application, but it does not ensure that a system is being operated correctly. Integrated test facility is considered a useful audit tool during an IT audit because it uses the same programs to compare processing using independently calculated data. This involves setting up dummy entities on an application system and processing test or production data against the entity as a means of verifying processing accuracy.

  Read more →
• 

  Weight initialization

  In deep learning, weight initialization or parameter initialization describes the initial step in creating a neural network. A neural network contains trainable parameters that are modified during training: weight initialization is the pre-training step of assigning initial values to these parameters. The choice of weight initialization method affects the speed of convergence, the scale of neural activation within the network, the scale of gradient signals during backpropagation, and the quality of the final model. Proper initialization is necessary for avoiding issues such as vanishing and exploding gradients and activation function saturation. Note that even though this article is titled "weight initialization", both weights and biases are used in a neural network as trainable parameters, so this article describes how both of these are initialized. Similarly, trainable parameters in convolutional neural networks (CNNs) are called kernels and biases, and this article also describes these. == Constant initialization == We discuss the main methods of initialization in the context of a multilayer perceptron (MLP). Specific strategies for initializing other network architectures are discussed in later sections. For an MLP, there are only two kinds of trainable parameters, called weights and biases. Each layer l {\displaystyle l} contains a weight matrix W ( l ) ∈ R n l − 1 × n l {\displaystyle W^{(l)}\in \mathbb {R} ^{n_{l-1}\times n_{l}}} and a bias vector b ( l ) ∈ R n l {\displaystyle b^{(l)}\in \mathbb {R} ^{n_{l}}} , where n l {\displaystyle n_{l}} is the number of neurons in that layer. A weight initialization method is an algorithm for setting the initial values for W ( l ) , b ( l ) {\displaystyle W^{(l)},b^{(l)}} for each layer l {\displaystyle l} . The simplest form is zero initialization: W ( l ) = 0 , b ( l ) = 0 {\displaystyle W^{(l)}=0,b^{(l)}=0} Zero initialization is usually used for initializing biases, but it is not used for initializing weights, as it leads to symmetry in the network, causing all neurons to learn the same features. In this page, we assume b = 0 {\displaystyle b=0} unless otherwise stated. Recurrent neural networks typically use activation functions with bounded range, such as sigmoid and tanh, since unbounded activation may cause exploding values. (Le, Jaitly, Hinton, 2015) suggested initializing weights in the recurrent parts of the network to identity and zero bias, similar to the idea of residual connections and LSTM with no forget gate. In most cases, the biases are initialized to zero, though some situations can use a nonzero initialization. For example, in multiplicative units, such as the forget gate of LSTM, the bias can be initialized to 1 to allow good gradient signal through the gate. For neurons with ReLU activation, one can initialize the bias to a small positive value like 0.1, so that the gradient is likely nonzero at initialization, avoiding the dying ReLU problem. == Random initialization == Random initialization means sampling the weights from a normal distribution or a uniform distribution, usually independently. === LeCun initialization === LeCun initialization, popularized in (LeCun et al., 1998), is designed to preserve the variance of neural activations during the forward pass. It samples each entry in W ( l ) {\displaystyle W^{(l)}} independently from a distribution with mean 0 and variance 1 / n l − 1 {\displaystyle 1/n_{l-1}} . For example, if the distribution is a continuous uniform distribution, then the distribution is U ( ± 3 / n l − 1 ) {\displaystyle {\mathcal {U}}(\pm {\sqrt {3/n_{l-1}}})} . === Glorot initialization === Glorot initialization (or Xavier initialization) was proposed by Xavier Glorot and Yoshua Bengio. It was designed as a compromise between two goals: to preserve activation variance during the forward pass and to preserve gradient variance during the backward pass. For uniform initialization, it samples each entry in W ( l ) {\displaystyle W^{(l)}} independently and identically from U ( ± 6 / ( n l + 1 + n l − 1 ) ) {\displaystyle {\mathcal {U}}(\pm {\sqrt {6/(n_{l+1}+n_{l-1})}})} . In the context, n l − 1 {\displaystyle n_{l-1}} is also called the "fan-in", and n l + 1 {\displaystyle n_{l+1}} the "fan-out". When the fan-in and fan-out are equal, then Glorot initialization is the same as LeCun initialization. === He initialization === As Glorot initialization performs poorly for ReLU activation, He initialization (or Kaiming initialization) was proposed by Kaiming He et al. for networks with ReLU activation. It samples each entry in W ( l ) {\displaystyle W^{(l)}} from N ( 0 , 2 / n l − 1 ) {\displaystyle {\mathcal {N}}(0,2/n_{l-1})} . === Orthogonal initialization === (Saxe et al. 2013) proposed orthogonal initialization: initializing weight matrices as uniformly random (according to the Haar measure) semi-orthogonal matrices, multiplied by a factor that depends on the activation function of the layer. It was designed so that if one initializes a deep linear network this way, then its training time until convergence is independent of depth. Sampling a uniformly random semi-orthogonal matrix can be done by initializing X {\displaystyle X} by IID sampling its entries from a standard normal distribution, then calculate ( X X ⊤ ) − 1 / 2 X {\displaystyle \left(XX^{\top }\right)^{-1/2}X} or its transpose, depending on whether X {\displaystyle X} is tall or wide. For CNN kernels with odd widths and heights, orthogonal initialization is done this way: initialize the central point by a semi-orthogonal matrix, and fill the other entries with zero. As an illustration, a kernel K {\displaystyle K} of shape 3 × 3 × c × c ′ {\displaystyle 3\times 3\times c\times c'} is initialized by filling K [ 2 , 2 , : , : ] {\displaystyle K[2,2,:,:]} with the entries of a random semi-orthogonal matrix of shape c × c ′ {\displaystyle c\times c'} , and the other entries with zero. (Balduzzi et al., 2017) used it with stride 1 and zero-padding. This is sometimes called the Orthogonal Delta initialization. Related to this approach, unitary initialization proposes to parameterize the weight matrices to be unitary matrices, with the result that at initialization they are random unitary matrices (and throughout training, they remain unitary). This is found to improve long-sequence modelling in LSTM. Orthogonal initialization has been generalized to layer-sequential unit-variance (LSUV) initialization. It is a data-dependent initialization method, and can be used in convolutional neural networks. It first initializes weights of each convolution or fully connected layer with orthonormal matrices. Then, proceeding from the first to the last layer, it runs a forward pass on a random minibatch, and divides the layer's weights by the standard deviation of its output, so that its output has variance approximately 1. === Fixup initialization === In 2015, the introduction of residual connections allowed very deep neural networks to be trained, much deeper than the ~20 layers of the previous state of the art (such as the VGG-19). Residual connections gave rise to their own weight initialization problems and strategies. These are sometimes called "normalization-free" methods, since using residual connection could stabilize the training of a deep neural network so much that normalizations become unnecessary. Fixup initialization is designed specifically for networks with residual connections and without batch normalization, as follows: Initialize the classification layer and the last layer of each residual branch to 0. Initialize every other layer using a standard method (such as He initialization), and scale only the weight layers inside residual branches by L − 1 2 m − 2 {\displaystyle L^{-{\frac {1}{2m-2}}}} . Add a scalar multiplier (initialized at 1) in every branch and a scalar bias (initialized at 0) before each convolution, linear, and element-wise activation layer. Similarly, T-Fixup initialization is designed for Transformers without layer normalization. === Others === Instead of initializing all weights with random values on the order of O ( 1 / n ) {\displaystyle O(1/{\sqrt {n}})} , sparse initialization initialized only a small subset of the weights with larger random values, and the other weights zero, so that the total variance is still on the order of O ( 1 ) {\displaystyle O(1)} . Random walk initialization was designed for MLP so that during backpropagation, the L2 norm of gradient at each layer performs an unbiased random walk as one moves from the last layer to the first. Looks linear initialization was designed to allow the neural network to behave like a deep linear network at initialization, since W R e L U ( x ) − W R e L U ( − x ) = W x {\displaystyle W\;\mathrm {ReLU} (x)-W\;\mathrm {ReLU} (-x)=Wx} . It initializes a matrix W {\displaystyle W} of shape R n 2 × m {\displaystyle \mathbb {R} ^{{\frac {n}{2}}\times m}} by any method, such as orthogonal initialization, t

  Read more →
• 

  DUAL table

  The DUAL table is a special one-row, one-column table present by default in Oracle and other database installations. In Oracle, the table has a single VARCHAR2(1) column called DUMMY that has a value of 'X'. It is suitable for use in selecting a pseudo column such as SYSDATE or USER. == Example use == Oracle's SQL syntax requires the FROM clause but some queries don't require any tables - DUAL can be used in these cases. == History == Charles Weiss explains why he created DUAL: I created the DUAL table as an underlying object in the Oracle Data Dictionary. It was never meant to be seen itself, but instead used inside a view that was expected to be queried. The idea was that you could do a JOIN to the DUAL table and create two rows in the result for every one row in your table. Then, by using GROUP BY, the resulting join could be summarized to show the amount of storage for the DATA extent and for the INDEX extent(s). The name, DUAL, seemed apt for the process of creating a pair of rows from just one. == Optimization == Beginning with 10g Release 1, Oracle no longer performs physical or logical I/O on the DUAL table, though the table still exists. DUAL is readily available for all authorized users in a SQL database. == In other database systems == Several other databases (including Microsoft SQL Server, MySQL, PostgreSQL, SQLite, and Teradata) enable one to omit the FROM clause entirely if no table is needed. This avoids the need for any dummy table. ClickHouse has a one-row system table system.one with a single column named "dummy" of type UInt8 and value 0. This table is implicitly used when no table is specified in the SELECT query. Firebird has a one-row system table RDB$DATABASE that is used in the same way as Oracle's DUAL, although it also has a meaning of its own. IBM Db2 has a view that resolves DUAL when using Oracle Compatibility. It also has a table called sysibm.sysdummy1 that has similar properties to the Oracle DUAL one. Informix: Informix version 11.50 and later has a table named sysmaster:"informix".sysdual with the same functionality but a more verbose name. You can use CREATE PUBLIC SYNONYM dual FOR sysmaster:"informix".sysdual to create a name dual in the current database with the same functionality. Microsoft Access: A table named DUAL may be created and the single-row constraint enforced via ADO (Table-less UNION query in MS Access) Microsoft SQL Server: SQL Server does not require a dummy table. Queries like 'select 1 + 1' can be run without a "from" clause/table name. MySQL allows DUAL to be specified as a table in queries that do not need data from any tables. It is suitable for use in selecting a result function such as SYSDATE() or USER(), although it is not essential. PostgreSQL: A DUAL-view can be added to ease porting from Oracle. Snowflake: DUAL is supported, but not explicitly documented. It appears in sample SQL for other operations in the documentation. SQLite: A VIEW named "dual" that works the same as the Oracle "dual" table can be created as follows: CREATE VIEW dual AS SELECT 'x' AS dummy; SAP HANA has a table called DUMMY that works the same as the Oracle "dual" table. Teradata database does not require a dummy table. Queries like 'select 1 + 1' can be run without a "from" clause/table name. Vertica has support for a DUAL table in their official documentation.

  Read more →
• 

  Internet Security Awareness Training

  Internet Security Awareness Training (ISAT) is the training given to members of an organization regarding the protection of various information assets of that organization. ISAT is a subset of general security awareness training (SAT). Even small and medium enterprises are generally recommended to provide such training, but organizations that need to comply with government regulations (e.g., the Gramm–Leach–Bliley Act, the Payment Card Industry Data Security Standard, Health Insurance Portability and Accountability Act, Sarbanes–Oxley Act) normally require formal ISAT for annually for all employees. Often such training is provided in the form of online courses. ISAT, also referred to as Security Education, Training, and Awareness (SETA), organizations train and create awareness of information security management within their environment. It is beneficial to organizations when employees are well trained and feel empowered to take important actions to protect themselves and organizational data. The SETA program target must be based on user roles within organizations and for positions that expose the organizations to increased risk levels, specialized courses must be required. == Coverage == There are general topics to cover for the training, but it is necessary for each organization to have a coverage strategy based on its needs, as this will ensure the training is practical and captures critical topics relevant to the organization. As the threat landscape changes very frequently, organizations should continuously review their training programs to ensure relevance with current trends. Topics covered in ISAT include: Appropriate methods for protecting sensitive information on personal computer systems, including password policy Various computer security concerns, including spam, malware, phishing, social engineering, etc. Consequences of failure to properly protect information, including potential job loss, economic consequences to the firm, damage to individuals whose private records are divulged, and possible civil and criminal law penalties. Being Internet Security Aware means you understand that there are people actively trying to steal data that is stored within your organization's computers. (This often focuses on user names and passwords, so that criminal elements can ultimately get access to bank accounts and other high-value IT assets.) That is why it is important to protect the assets of the organization and stop that from happening. The general scope should include topics such as password security, Email phishing, Social engineering, Mobile device security, Sensitive data security, and Business communications. In contrast, those requiring specialized knowledge are usually required to take technical and in-depth training courses. Suppose an organization determines that it is best to use one of the available training tools on the market, it must ensure it sets objectives that the training can meet, including confirming the training will provide employees with the knowledge to understand risks and the behaviors needed in managing them, actions to take to prevent or detect security incidents, using language easily understandable by the trainees, and ensuring the pricing is reasonable. Organizations are recommended to base ISAT training content on employee roles and their culture; the policy should guide that training for all employees and gave the following as examples of sources of reference materials: National Institute of Standards and Technology (NIST) Special Publication 800-50, Building an Information Technology Security Awareness and Training Program International Standards Organization (ISO) 27002:2013, Information technology—Security techniques—Code of practice for information security controls International Standards Organization (ISO) 27001:2013, Information technology — Security techniques — Information security management systems COBIT 5 Appendix F.2, Detailed Guidance: Services, Infrastructure and Applications Enabler, Security Awareness The training must focus on current threats specific to an organization and the impacts if that materializes as a result of user actions. Including practical examples and ways of dealing with scenarios help users know the appropriate measures to take. It is a good practice to periodically train customers of specific organizations on threats they face from people with malicious intentions. Coverage strategy for SAT should be driven by an organization's policy. It can help truly determine the level of depth of the training and where it should be conducted at a global level or business unit level, or a combination of both. A policy also empowers a responsible party within the organization to run the training. == Importance == Studies show that well-structured security awareness training can significantly reduce the likelihood of cyber incidents caused by human error. According to the Ponemon Institute, organizations that implement regular security training experience up to 70% fewer successful phishing attacks. Additionally, a 2023 Verizon Data Breach Investigations Report found that 74% of breaches involve the human element, highlighting the need for continuous education. Employees are key in whether organizations are breached or not; there must be a policy on creating awareness and training them on emerging threats and actions to take in safeguarding sensitive information and reporting any observed unusual activity within the corporate environment. Research has shown that SAT has helped reduce cyber-attacks within organizations, especially when it comes to phishing, as trainees learned to identify these attack modes and give them the self-assurance to take action appropriately. There is an increase in phishing attacks, and it has become increasingly important for people to understand how to these attacks work, and the actions required to prevent these and SAT has shown a significant impact on the number of successful phishing attacks against organizations. == Compliance Requirements == Various regulations and laws mandate SAT for organizations in specific industries, including the Gramm–Leach–Bliley Act (GLBA) for the financial services, the Federal Information Security Modernization Act of 2014 for federal agencies, and the European Union's General Data Protection Regulation (GDPR). === Federal Information Security Modernization Act === Employees and contractors in federal agencies are required to receive Security Awareness Training annually, and the program needs to address job-related information security risks linked that provide them with the knowledge to lessen security risks. === Health Insurance Portability and Accountability Act === The Health Insurance Portability and Accountability Act has the Security Rule, and Privacy Rule requiring the creation of a security awareness training program and ensuring employees are trained accordingly. === Payment Card Industry Data Security Standard === The Payment Card Industry Security Standards Council, the governing council for stakeholders in the payment industry, formed by American Express, Discover, JCB International, MasterCard, and Visa that developed the DSS as a requirement for the payment industry. Requirement 12.6 requires member organizations to institute a formal security awareness program. There is a published guide for organizations to adhere to when setting up the program. === US States Training Regulations === Some States mandate Security Awareness Training whiles other do not but simply recommend voluntary training. Among states that require the training for its employees include: Colorado (The Colorado Information Security Act, Colorado Revised Statutes 24-37.5-401 et seq.) Connecticut (13 FAM 301.1-1 Cyber Security Awareness Training (PS800)) Florida (Florida Statutes Chapter 282) Georgia (Executive Order GA E.O.182 mandated training within 90 days of issue) Illinois (Cook County) Indiana (IN H 1240) Louisiana (Louisiana Division of Administration, Office of Technology Services p. 52: LA H 633) Maryland (20-07 IT Security Policy) Montana (Mandatory cyber training for executive branch state employees) Nebraska Nevada (agency-by-agency state employee requirement - State Security Standard 123 – IT Security) New Hampshire New Jersey ( NJ A 1654) North Carolina Ohio (IT-15 - Security Awareness and Training) Pennsylvania Texas Utah Vermont Virginia West Virginia (WV Code Section 5A-6-4a) == Training Techniques == Below are some common training techniques, even though some can be blended depending on the operating environment: Interactive video training – This technique allows users to be trained using two-way interactive audio and video instruction. Web-based training – This method allows employees or users to take the training independently and usually has a testing component to determine if learning has taken place. If not, users can be allowed to retake the course and test to ensure there is a complete understanding

  Read more →
• 

  Frame grabber

  A frame grabber is an electronic device that captures (i.e., "grabs") individual, digital still frames from an analog video signal or a digital video stream. It is usually employed as a component of a computer vision system, in which video frames are captured in digital form and then displayed, stored, transmitted, analyzed, or combinations of these. Historically, frame grabber expansion cards were the predominant way to interface cameras to PCs. Other interface methods have emerged since then, with frame grabbers (and in some cases, cameras with built-in frame grabbers) connecting to computers via interfaces such as USB, Ethernet and IEEE 1394 ("FireWire"). Early frame grabbers typically had only enough memory to store a single digitized video frame, whereas many modern frame grabbers can store multiple frames. Modern frame grabbers often are able to perform functions beyond capturing a single video input. For example, some devices capture audio in addition to video, and some devices provide, and concurrently capture frames from multiple video inputs. Other operations may be performed as well, such as deinterlacing, text or graphics overlay, image transformations (e.g., resizing, rotation, mirroring), and conversion to JPEG or other compressed image formats. To satisfy the technological demands of applications such as radar acquisition, manufacturing and remote guidance, some frame grabbers can capture images at high frame rates, high resolutions, or both. == Circuitry == Analog frame grabbers, which accept and process analog video signals, include these circuits: Input signal conditioner that buffers the analog video input signal to protect downstream circuitry Video decoder that converts SD analog video (e.g., NTSC, SECAM, PAL) or HD analog video (e.g., AHD, HD-TVI, HD-CVI) to a digital format Digital frame grabbers, which accept and process digital video streams, include these circuits: Digital video decoder that interfaces to and converts a specific type of digital video source, such as Camera Link, CoaXPress, DVI, GigE Vision, LVDS, or SDI Circuitry common to both analog and digital frame grabbers: Memory for storing the acquired image (i.e., a frame buffer) A bus interface through which a processor can control the acquisition and access the data General purpose I/O for triggering image acquisition or controlling external equipment == Applications == === Healthcare === Frame grabbers are used in medicine for many applications, including telenursing and remote guidance. In situations where an expert at another location needs to be consulted, frame grabbers capture the image or video from the appropriate medical equipment, so it can be sent digitally to the distant expert. === Manufacturing === "Pick and place" machines are often used to mount electronic components on circuit boards during the circuit board assembly process. Such machines use one or more cameras to monitor the robotics that places the components. Each camera is paired with a frame grabber that digitizes the analog video, thus converting the video to a form that can be processed by the machine software. === Network security === Frame grabbers may be used in security applications. For example, when a potential breach of security is detected, a frame grabber captures an image or a sequence of images, and then the images are transmitted across a digital network where they are recorded and viewed by security personnel. === Personal use === In recent years with the rise of personal video recorders like camcorders, mobile phones, etc. video and photo applications have gained ascending prominence. Frame grabbing is becoming very popular on these devices. === Astronomy & astrophotography === Amateur astronomers and astrophotographers use frame grabbers when using analog "low light" cameras for live image display and internet video broadcasting of celestial objects. Frame grabbers are essential to connect the analog cameras used in this application to the computers that store or process the images.

  Read more →
• 

  Speech recognition

  Speech recognition (automatic speech recognition (ASR), computer speech recognition, or speech-to-text (STT)) is a sub-field of computational linguistics concerned with methods and technologies that translate spoken language into text or other interpretable forms. Speech recognition applications include voice user interfaces, where the user speaks to a device, which "listens" and processes the audio. Common voice applications include interpreting commands for calling, call routing, home automation, and aircraft control. These applications are called direct voice input. Productivity applications include searching audio recordings, creating transcripts, and dictation. Speech recognition can be used to analyse speaker characteristics, such as identifying native language using pronunciation assessment. Voice recognition (speaker identification) refers to identifying the speaker, rather than speech contents. Recognizing the speaker can simplify the task of translating speech in systems trained on a specific person's voice. It can also be used to authenticate the speaker as part of a security process. == History == Applications for speech recognition developed over many decades, with progress accelerated due to advances in deep learning and the use of big data. These advances are reflected in an increase in academic papers, and greater system adoption. Key areas of growth include vocabulary size, more accurate recognition for unfamiliar speakers (speaker independence), and faster processing speed. === Pre-1970 === 1952 – Bell Labs researchers, Stephen Balashek, R. Biddulph, and K. H. Davis, built Audrey for single-speaker digit recognition. Their system located the formants in the power spectrum of each utterance. 1960 – Gunnar Fant developed and published the source–filter model of speech production. 1962 – IBM's 16-word "Shoebox" machine's speech recognition debuted at the 1962 World's Fair. 1966 – Linear predictive coding, a speech coding method, was proposed by Fumitada Itakura of Nagoya University and Shuzo Saito of Nippon Telegraph and Telephone. 1969 – Funding at Bell Labs came to a halt for several years after the company's head engineer, John R. Pierce, wrote an open letter criticizing speech recognition research. This defunding lasted until Pierce retired and James L. Flanagan took over. Raj Reddy was the first person to work on continuous speech recognition, as a graduate student at Stanford University in the late 1960s. Previous systems required users to pause after each word. Reddy's system issued spoken commands for playing chess. Around this time, Soviet researchers invented the dynamic time warping (DTW) algorithm and used it to create a recognizer capable of operating on a 200-word vocabulary. DTW processed speech by dividing it into short frames (e.g. 10 ms segments) and treating each frame as a unit. Speaker independence, however, remained unsolved. === 1970–1990 === 1971 – DARPA funded a five-year speech recognition research project, Speech Understanding Research, seeking a minimum vocabulary size of 1,000 words. The project considered speech understanding a key to achieving progress in speech recognition, which was later disproved. BBN, IBM, Carnegie Mellon (CMU), and Stanford Research Institute participated. 1972 – The IEEE Acoustics, Speech, and Signal Processing group held a conference in Newton, Massachusetts. 1976 – The first ICASSP was held in Philadelphia, which became a major venue for publishing on speech recognition. During the late 1960s, Leonard Baum developed the mathematics of Markov chains at the Institute for Defense Analysis. A decade later, at CMU, Raj Reddy's students James Baker and Janet M. Baker began using the hidden Markov model (HMM) for speech recognition. James Baker had learned about HMMs while at the Institute for Defense Analysis. HMMs enabled researchers to combine sources of knowledge, such as acoustics, language, and syntax, in a unified probabilistic model. By the mid-1980s, Fred Jelinek's team at IBM created a voice-activated typewriter called Tangora, which could handle a 20,000-word vocabulary. Jelinek's statistical approach placed less emphasis on emulating human brain processes in favor of statistical modelling. (Jelinek's group independently discovered the application of HMMs to speech.) This was controversial among linguists since HMMs are too simplistic to account for many features of human languages. However, the HMM proved to be a highly useful way for modelling speech and replaced dynamic time warping as the dominant speech recognition algorithm in the 1980s. 1982 – Dragon Systems, founded by James and Janet M. Baker, was one of IBM's few competitors. === Practical speech recognition === The 1980s also saw the introduction of the n-gram language model. 1987 – The back-off model enabled language models to use multiple-length n-grams, and CSELT used HMM to recognize languages (in software and hardware, e.g. RIPAC). At the end of the DARPA program in 1976, the best computer available to researchers was the PDP-10 with 4 MB of RAM. It could take up to 100 minutes to decode 30 seconds of speech. Practical products included: 1984 – the Apricot Portable was released with up to 4096 words support, of which only 64 could be held in RAM at a time. 1987 – a recognizer from Kurzweil Applied Intelligence 1990 – Dragon Dictate, a consumer product released in 1990. AT&T deployed the Voice Recognition Call Processing service in 1992 to route telephone calls without a human operator. The technology was developed by Lawrence Rabiner and others at Bell Labs. By the early 1990s, the vocabulary of the typical commercial speech recognition system had exceeded the average human vocabulary. Reddy's former student, Xuedong Huang, developed the Sphinx-II system at CMU. Sphinx-II was the first to do speaker-independent, large vocabulary, continuous speech recognition, and it won DARPA's 1992 evaluation. Handling continuous speech with a large vocabulary was a major milestone. Huang later founded the speech recognition group at Microsoft in 1993. Reddy's student Kai-Fu Lee joined Apple, where, in 1992, he helped develop the Casper speech interface prototype. Lernout & Hauspie, a Belgium-based speech recognition company, acquired other companies, including Kurzweil Applied Intelligence in 1997 and Dragon Systems in 2000. L&H was used in Windows XP. L&H was an industry leader until an accounting scandal destroyed it in 2001. L&H speech technology was bought by ScanSoft, which became Nuance in 2005. Apple licensed Nuance software for its digital assistant Siri. ==== 2000s ==== In the 2000s, DARPA sponsored two speech recognition programs: Effective Affordable Reusable Speech-to-Text (EARS) in 2002, followed by Global Autonomous Language Exploitation (GALE) in 2005. Four teams participated in EARS: IBM; a team led by BBN with LIMSI and the University of Pittsburgh; Cambridge University; and a team composed of ICSI, SRI, and the University of Washington. EARS funded the collection of the Switchboard telephone speech corpus, which contained 260 hours of recorded conversations from over 500 speakers. The GALE program focused on Arabic and Mandarin broadcast news. Google's first effort at speech recognition came in 2007 after recruiting Nuance researchers. Its first product, GOOG-411, was a telephone-based directory service. Since at least 2006, the U.S. National Security Agency has employed keyword spotting, allowing analysts to index large volumes of recorded conversations and identify speech containing "interesting" keywords. Other government research programs focused on intelligence applications, such as DARPA's EARS program and IARPA's Babel program. In the early 2000s, speech recognition was dominated by hidden Markov models combined with feed-forward artificial neural networks (ANN). Later, speech recognition was taken over by long short-term memory (LSTM), a recurrent neural network (RNN) published by Sepp Hochreiter & Jürgen Schmidhuber in 1997. LSTM RNNs avoid the vanishing gradient problem and can learn "Very Deep Learning" tasks that require memories of events that happened thousands of discrete time steps earlier, which is important for speech. Around 2007, LSTMs trained with Connectionist Temporal Classification (CTC) began to outperform. In 2015, Google reported a 49 percent error‑rate reduction in its speech recognition via CTC‑trained LSTM. Transformers, a type of neural network based solely on attention, were adopted in computer vision and language modelling, and then to speech recognition. Deep feed-forward (non-recurrent) networks for acoustic modelling were introduced in 2009 by Geoffrey Hinton and his students at the University of Toronto, and by Li Deng and colleagues at Microsoft Research. In contrast to the prioer incremental improvements, deep learning decreased error rates by 30%. Both shallow and deep forms (e.g., recurrent nets) of ANNs had been explored since the 1980s. Howev

  Read more →
• 

  Trebel (music app)

  Trebel is an on-demand music download and discovery platform developed by M&M Media Inc. The company's business model aims to combat digital music piracy by giving users access to on-demand music at no cost while delivering fair compensation to artists and music rights holders. Trebel has a patent that allows it to market itself as the only international music service in which users can legally download music and listen to it offline for free. As of March 2023, Trebel has a catalog of 75 million songs from record labels such as Universal Music Group, Sony Music Entertainment, Warner Music Group and hundreds of independent labels. Trebel is based in Stamford, Connecticut. with additional locations in Mexico City, Jakarta, Bogota, Los Angeles and Miami. The app is available in the Apple App Store, Google Play Store, and Huawei AppGallery. == History == Trebel was founded in 2014 by Gary Mekikian, who was previously the co-founder of answerFriend, Inc., which commercialized web based question-answering technologies and merged with Electric Knowledge, forming InQuira. This company was eventually acquired by Oracle Corporation in 2011. His co-founders at Trebel include Stanford classmates Corey Jones and Luis Soto Durazo, as well as his daughters Grace and Juliette. Mekikian envisioned Trebel as an alternative to music piracy after a high school classmate of his daughters was targeted by cyberattackers while illegally downloading music online. Trebel was initially released in 2015 under the name Project Carmen to students at Ohio State, Santa Monica College, Cal State Fullerton, UCLA and Long Beach State. In its original incarnation, the service planned to target students at 3,000 universities and 30,000 high schools in the United States. A beta version of the app was introduced in 2016 with content from Universal Music Group and Warner Music Group. Trebel launched commercially in the United States and Mexico in 2018. In 2018, Mexican mass-media corporation Televisa also became a minority investor in Trebel. In May 2020, during the early months of the COVID-19 pandemic, Trebel was a digital broadcast partner for Se Agradece, a concert produced in Mexico by Televisa to honor frontline COVID workers that featured artists such as Rosalia, J Balvin, Maluma and Ricky Martin. In June 2021, Trebel reached 3 million monthly active users. In October 2021, Trebel signed a music licensing agreement with Merlin Network, the licensing agency for the independent music sector that controls an estimated 12% of the global digital recorded music market. In January 2022, Trebel announced a strategic alliance with MNC Corporation, an Indonesian media conglomerate, which also became a minority backer of the company. In March 2022, Trebel reported 5.2 million monthly active users as a result of growth in Latin America. In the same month,, Latin music star Maluma became a backer of Trebel and an advisor to Gary Mekikian, helping expand the service throughout Latin America. On April 18, 2022, Trebel launched in Indonesia during the finale of the music competition show X Factor Indonesia. Trebel also signed a deal that month with Soccer Media Solutions, a sports and entertainment marketing agency in Mexico, to sell Trebel’s premium advertising inventory through Soccer Media. In May 2022, Guillermo Ochoa, goalkeeper for the Mexican national soccer team, invested in Trebel and became an ambassador for the company. On October 2, 2022, Trebel collaborated with Musica Studios, one of the largest music companies in Indonesia, on the production of a music festival in Jakarta titled Trebel Music Fest. The event featured performances by top Indonesian music artists such as Noah, Nidji, and d'Masiv. In October 2022, Trebel launched in Colombia. The service reached 1.2 million monthly active users in Colombia six months after launching. In December 2022, Trebel collaborated with KFC in Indonesia on the release of a KFC digital music program using a product called Trebel Max. As part of the program, KFC customers who bought the Crazy Superstar Combo package at KFC received a subscription to Trebel Max for 30 days. Trebel announced the launch of Trebel AI in May 2023. Trebel AI uses ChatGPT-powered technology to generate playlists based on natural language queries from users. In Indonesia, the Trebel AI feature was announced during a broadcast of the show Indonesian Idol XII that took place on May 8, 2023. In July 2023, Trebel reached more than 13 million monthly active users. In November 2023, Trebel became a featured app on the Discord app directory. Discord users that add the Trebel bot to their servers have access to Trebel's on-demand music library and have the exclusive privilege of being DJ's during server sessions with up to 150 concurrent listeners. == Platform == === Features === Trebel has a patent that allows it to market itself as the only international music service in which users can legally download music and listen to it offline for free. As of March 2023, Trebel has a catalog of 75 million songs from record labels such as Universal Music Group, Sony Music Entertainment, Warner Music Group and hundreds of independent labels. Trebel offers unlimited music downloads that are playable in the app by registered users only. Offline listening is free to all users and not blocked by a paywall. Users can search for music based on song, artist, album, browsing friends' recent activity, and through other users' playlists. The app also offers free cloud storage for downloaded songs. Trebel also contains a feature called SongID, which identifies music being played nearby using a short sample, then offers it for download on the service. Podcasts are available for free listening on the service as well. === Business model === Trebel uses a business model that generates revenue from the sale of digital advertising as well as user interactions with branded experiences, and consumption of virtual goods within the app (akin to mobile games). The app also features a brand takeover feature called Trebel Max, which offers unlimited access in exchange for users engaging with experiences offered by specific brands. Trebel’s brand partners include Uber, KFC, Walmart, Coca-Cola, Amazon and P&G. === Content === In September 2022, Trebel secured an exclusive release of the song “Suara Hatiku” by Indonesian actress Amanda Monopo. As of March 2023, Trebel offers 75 million songs through licensing agreements with Universal Music Group, Sony Music Entertainment, Warner Music Group and global indie rights agency Merlin. == Awards == In 2023, Trebel won three Google Play awards including "Best App of 2023", "Best Everyday Essentials" and "Users' Choice".

  Read more →
• 

  Record sealing

  Record sealing is the process of making public records inaccessible to the public. In many cases, a person with a sealed record gains the legal right to deny or not acknowledge anything to do with the arrest and the legal proceedings from the case itself. Records are commonly sealed in a number of situations: Sealed birth records (typically after adoption or determination of paternity) Juvenile criminal records may be sealed Other types of cases involving juveniles may be sealed, anonymized, or pseudonymized ("impounded"); e.g., child sex offense or custody cases Cases using witness protection information may be partly sealed Cases involving trade secrets Cases involving state secrets == Filing under seal in US court == Normally, records should not be filed under seal without a court permission. However, FRCP 5.2 requires that sensitive text – like Social Security number, Taxpayer Identification Number, birthday, bank accounts, and children’s names – should be redacted off the filings made with the court and accompanying exhibits. A person making a redacted filing can file an unredacted copy under seal, or the Court can choose to order later that an additional filing be made under seal without redaction. Alternately, the filing party may ask the court’s permission to file some exhibits completely under seal. When the document is filed "under seal", it should have a clear indication for the court clerk to file it separately – most often by stamping words "Filed Under Seal" on the bottom of each page. Person making filing should also provide instructions to the court clerk that the document needs to be filed "under seal". Courts often have specific requirements to these filings in their Local Rules. == Difference from expungement == Expungement, which is a physical destruction, namely a complete erasure of one's criminal records, and therefore usually carries a higher standard, differs from record sealing, which is only to restrict the public's access to records, so that only certain law enforcement agencies or courts, under special circumstances, will have access to them. A record seal will greatly improve the chance of employment, as employers will not have access to damning records. There are occasions, like expungement, where one can truthfully state under oath that they have never been convicted before. Most of the time, a record seal has more relaxed requirements than an expungement. If an expungement is not allowed with a case, then sealing a record may be the best bet. Different states have different terms for what constitutes sealing of a record. == Cybersecurity incidents involving sealed records == Several cybersecurity incidents have demonstrated that sealed court documents are not always secure in practice, with vulnerabilities and data breaches exposing sensitive information. In January 2021, following the SolarWinds cyber attack, the U.S. Bankruptcy Court United States District Court for the District of Nevada announced that its Case Management/Electronic Case Files CM/ECF system had been potentially compromised. The judiciary stated that additional safeguards were being implemented to protect filings, and that the review of the incident and its impact was ongoing. Reports noted that the breach raised concerns about exposure of highly sensitive and sealed documents submitted through the CM/ECF system. In 2023, security researcher Jason Parker, following a tip from an activist, identified flaws in online court systems that exposed sealed records including confidential testimony and medical records through publicly accessible portals. In 2024, a cyber intrusion targeting attorneys in a civil case involving Representative Matt Gaetz led to the unauthorized access and leak of sealed depositions and related records. The breach exposed confidential testimony and financial records, some of which were later reported by news outlets, raising concerns about the security of electronically stored legal materials and the handling of sealed filings. In 2025, multiple reports confirmed that the federal judiciary's CM/ECF and PACER (law) filing system was compromised, exposing sealed indictments, confidential informant information, and other sensitive filings. Some courts temporarily reverted to paper-based filing to mitigate the risks of further disclosure. The FBI later confirmed that the breach had exposed sealed records, and investigators suspected foreign state actors were involved. == GAO publications referencing sealed records == Closed Criminal Plea and Sentencing Proceedings (1983) – Reviewed Department of Justice policies on closing plea and sentencing hearings. GAO noted that sealed transcripts should be unsealed once the reasons for closure no longer applied. Information on Plea Agreements and Settlements in Defense Procurement Fraud Cases (1992) – Examined outcomes of procurement fraud prosecutions. GAO observed that in some instances the results were sealed from public access. Military Recruiting: More Needs to Be Done to Better Screen Applicants and Detect Fraud (1999) – Investigated fraudulent enlistments in the armed forces. The report highlighted that sealed juvenile records often prevented recruiters from discovering prior offenses. Social Security Numbers: Governments Could Do More to Reduce Display in Public Records (2004) – Analyzed risks associated with SSN availability in state and local records. GAO pointed out that some categories of records, such as adoption proceedings, were sealed and less likely to expose identifiers. Social Security Numbers: Stronger Safeguards Needed to Protect Privacy (2005 testimony) – Testimony before Congress reiterating concerns over SSN exposure in public records, while noting that sealed categories (e.g., adoption) were exceptions. U.S. Supreme Court: Policies and Perspectives on Video and Audio Coverage of Appellate Court Proceedings (2016) – Surveyed appellate court policies on courtroom media coverage. The report acknowledged distinctions between public filings, confidential submissions, and sealed materials. Evictions: National Data Are Limited and Challenging to Collect (2024) – Examined nationwide eviction data. GAO reported that in some states eviction records may be sealed or expunged, limiting researchers' ability to compile datasets. DOD Fraud Risk Management: Enhanced Data and Collaboration Could Improve Efforts (2024) – Reviewed Department of Defense fraud-risk management. GAO noted that some adjudicative records in its dataset were sealed, restricting completeness of oversight data.

  Read more →
• 

  Videotex

  Videotex (or interactive videotex) was one of the earliest implementations of an end-user information system. From the late 1970s to early 2010s, it was used to deliver information (usually pages of text) to a user in computer-like format, typically to be displayed on a television or a dumb terminal. In a strict definition, videotex is any system that provides interactive content and displays it on a video monitor such as a television, typically using modems to send data in both directions. A close relative is teletext, which sends data in one direction only, typically encoded in a television signal. All such systems are occasionally referred to as viewdata. Unlike the modern Internet, traditional videotex services were highly centralized. Videotex in its broader definition can be used to refer to any such service, including teletext, the Internet, bulletin board systems, online service providers, and even the arrival/departure displays at an airport. This usage is no longer common. With the exception of Minitel in France, videotex elsewhere never managed to attract any more than a very small percentage of the universal mass market once envisaged. By the end of the 1980s its use was essentially limited to a few niche applications. == Initial development and technologies == === United Kingdom === The first attempts at a general-purpose videotex service were created in the United Kingdom in the late 1960s. In about 1970 the BBC had a brainstorming session in which it was decided to start researching ways to send closed captioning information to the audience. As the Teledata research continued the BBC became interested in using the system for delivering any sort of information, not just closed captioning. In 1972, the concept was first made public under the new name Ceefax. Meanwhile, the General Post Office (soon to become British Telecom) had been researching a similar concept since the late 1960s, known as Viewdata. Unlike Ceefax which was a one-way service carried in the existing TV signal, Viewdata was a two-way system using telephones. Since the Post Office owned the telephones, this was considered to be an excellent way to drive more customers to use the phones. Not to be outdone by the BBC, they also announced their service, under the name Prestel. ITV soon joined the fray with a Ceefax-clone known as ORACLE. In 1974, all the services agreed on a standard for displaying the information. The display would be a simple 40×24 grid of text, with some "graphics characters" for constructing simple graphics, revised and finalized in 1976. The standard did not define the delivery system, so both Viewdata-like and Teledata-like services could at least share the TV-side hardware, which was expensive at the time. The standard also introduced a new term that covered all such services, teletext. Ceefax first started operation in 1974 with a limited 30 pages, followed quickly by ORACLE and then Prestel in 1979. By 1981, Prestel International was available in nine countries, and a number of countries, including Sweden, The Netherlands, Finland and West Germany were developing their own national systems closely based on Prestel. General Telephone and Electronics (GTE) acquired an exclusive agency for the system for North America. In the early 1980s, videotex became the base technology for the London Stock Exchange's pricing service called TOPIC. Later versions of TOPIC, notably TOPIC2 and TOPIC3, were developed by Thanos Vassilakis and introduced trading and historic price feeds. === France === Development of a French teletext-like system began in 1973. A very simple 2-way videotex system called Tictac was also demonstrated in the mid-1970s. As in the UK, this led on to work to develop a common display standard for videotex and teletext, called Antiope, which was finalised in 1977. Antiope had similar capabilities to the UK system for displaying alphanumeric text and chunky "mosaic" character-based block graphics. A difference however was that while in the UK standard control codes automatically also occupied one character position on screen, Antiope allowed for "non spacing" control codes. This gave Antiope slightly more flexibility in the use of colours in mosaic block graphics, and in presenting the accents and diacritics of the French language. Meanwhile, spurred on by the 1978 Nora/Minc report, the French government was determined to catch up on a perceived falling behind in its computer and communications facilities. In 1980 it began field trials issuing Antiope-based terminals for free to over 250,000 telephone subscribers in Ille-et-Vilaine region, where the French CCETT research centre was based, for use as telephone directories. The trial was a success, and in 1982 Minitel was rolled out nationwide. === Canada === Since 1970, researchers at the Communications Research Centre (CRC) in Ottawa had been working on a set of "picture description instructions", which encoded graphics commands as a text stream. Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6 bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a colour display, which was successfully up and running by 1977. Against the background of the developments in Europe, CRC was able to persuade the Canadian government to develop the system into a fully-fledged service. In August 1978, the Canadian Department of Communications publicly launched it as Telidon, a "second generation" videotex/teletext service, and committed to a four-year development plan to encourage rollout. Compared to the European systems, Telidon offered real graphics, as opposed to block-mosaic character graphics. The downside was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors. === Japan === Research in Japan was shaped by the demands of the large number of Kanji characters used in Japanese script. With 1970s technology, the ability to generate so many characters on demand in the end-user's terminal was seen as prohibitive. Instead, development focussed on methods to send pages to user terminals pre-rendered, using coding strategies similar to facsimile machines. This led to a videotex system called Captain ("Character and Pattern Telephone Access Information Network"), created by NTT in 1978, which went into full trials from 1979 to 1981. The system also lent itself naturally to photographic images, albeit at only moderate resolution. However, the pages typically took two or three times longer to load, compared to the European systems. NHK developed an experimental teletext system along similar lines, called CIBS ("Character Information Broadcasting Station"). Based on a 388×200 pixel resolution, it was first announced in 1976, and began trials in late 1978. (NHK's ultimate production teletext system launched in 1983). == Standards == Work to establish an international standard for videotex began in 1978 in CCITT. But the national delegations showed little interest in compromise, each hoping that their system would come to define what was perceived to be going to be an enormous new mass-market. In 1980 CCITT therefore issued recommendation S.100 (later T.100), noting the points of similarity but the essential incompatibility of the systems, and declaring all four to be recognised options. Trying to kick-start the market, AT&T Corporation entered the fray, and in May 1981 announced its own Presentation Layer Protocol (PLP). This was closely based on the Canadian Telidon system, but added to it some further graphics primitives and a syntax for defining macros, algorithms to define cleaner pixel spacing for the (arbitrarily sizeable) text, and also dynamically redefinable characters and a mosaic block graphic character set, so that it could reproduce content from the French Antiope. After some further revisions this was adopted in 1983 as ANSI standard X3.110, more commonly called NAPLPS, the North American Presentation Layer Protocol Syntax. It was also adopted in 1988 as the presentation-layer syntax for NABTS, the North American Broadcast Teletext Specification. Meanwhile, the European national Postal Telephone and Telegraph (PTT) agencies were also increasingly interested in videotex, and had convened discussions in European Conference of Postal and Telecommunications Administrations (CEPT) to co-ordinate developments, which had been diverging along national lines. As well as the British and French standards, the Swedes had proposed extending the British Prestel standard with a new se

  Read more →
• 

  Cloud-to-cloud integration

  Cloud-to-Cloud Integration ( C2I ) allows users to connect disparate cloud computing platforms. While Paas (Platform as a service) and Saas (Software as a service) continue to gain momentum, different vendors have different implementations for cloud computing, e.g. Database, REST, SOAP API. Another name for Cloud-to-Cloud Integration is Cloud-Surfing. See also Cloud-based integration

  Read more →
• 

  Weibo

  Weibo (Chinese: 微博; pinyin: Wēibó), or Sina Weibo (Chinese: 新浪微博; pinyin: Xīnlàng Wēibó), is a Chinese microblogging (weibo) website. Launched by Sina Corporation on 14 August 2009, it is one of the biggest social media platforms in China, with over 582 million monthly active users (252 million daily active users) as of Q1 2022. The platform has been highly successful but has faced criticism for heavy censorship. Sina had gone public on the Nasdaq in 2000. In March 2014, Sina announced a spinoff of Weibo and filed an IPO under the symbol WB. Sina carved out 11% of Weibo in the IPO, with Alibaba owning 32% post-IPO. The company began trading publicly on 17 April 2014. In March 2017, Sina launched Sina Weibo International Version. In November 2018, Sina Weibo suspended its registration function for minors under the age of 14. In July 2019, Sina Weibo announced that it would launch a two-month campaign to clean up pornographic and vulgar information, named "Project Deep Blue" (蔚蓝计划). On 29 September 2020, the company announced it would go private again due to rising tensions between the US and China. == Name == "Weibo" (微博) is the Chinese word for "microblog". Sina Weibo launched its new domain name weibo.com on 7 April 2011, deactivating and redirecting from the old domain, t.sina.com.cn, to the new one. Due to its popularity, the media sometimes refers to the platform simply as "Weibo", despite the numerous other Chinese microblogging services including Tencent Weibo, Sohu Weibo, and NetEase Weibo. However, the latter three have stopped providing services. == Background == Sina Weibo is a platform based on fostering user relationships to share, disseminate, and receive information. Through the website or the mobile app, users can upload pictures and videos publicly for instant sharing, with other users being able to comment with text, pictures and videos, or use a multimedia instant messaging service. The company initially invited a large number of celebrities to join the platform at the beginning and has since invited many media personalities, government departments, businesses and non-governmental organizations to open accounts for the purpose of publishing and communicating information. To avoid the impersonation of celebrities, Sina Weibo uses verification symbols; celebrity accounts have an orange letter "V" and organizations' accounts have a blue letter "V". Sina Weibo has more than 500 million registered users; out of these, 313 million are monthly active users, 85% use the Weibo mobile app, 70% are college-aged, 50.10% are male and 49.90% are female. There are over 100 million messages posted by users each day. With more than 100 million followers, actress Xie Na holds the record for the most followers on the platform. Despite fierce competition among Chinese social media platforms, Sina Weibo remains the most popular. == History == After the July 2009 Ürümqi riots, China shut down most domestic microblogging services, including Fanfou, the very first weibo service. Many popular non-China-based microblogging services like Twitter, Facebook, and Plurk have since been blocked. Sina Corporation CEO Charles Chao considered this to be an opportunity, and on 14 August 2009, Sina launched the tested version of Sina Weibo. Basic functions including message, private message, comment and reposting were made available that September. A Sina Weibo–compatible API platform for developing third-party applications was launched on 28 July 2010. On 1 December 2010, the website experienced an outage, which administrators later said was due to the ever-increasing numbers of users and posts. Registered users surpassed 100 million in February 2011. Since 23 March 2011, t.cn has been used as Sina Weibo's official shortened URL in lieu of sinaurl.cn. On 7 April 2011, weibo.com replaced t.sina.com.cn as the new main domain name used by the website. The official logo was also updated. In June 2011, Sina announced an English-language version of Sina Weibo would be developed and launched, though content would still be governed by Chinese law. On 11 January 2013, Sina Weibo and Alibaba China (a subsidiary of Alibaba Group) signed a strategic cooperation agreement. With more and more foreign celebrities using Sina Weibo, language translation has become an urgent need for Chinese users who wish to communicate with their idols online, especially Korean. In January 2013, Sina Weibo and NetEase.com announced that they had reached a strategic cooperation agreement. When users browse foreign language content, they can now directly obtain translation results through the YouDao Dictionary. The Sina Weibo financial report in February 2013 showed that its total revenue was approximately US$66 million and that the number of registered users had exceeded the 500 million mark. In April 2013, Sina officially announced that Sina Weibo had signed a strategic cooperation agreement with Alibaba. The two sides conducted in-depth cooperation in areas such as user account interoperability, data exchange, online payment, and internet marketing. At the same time, Sina announced that Alibaba, through its wholly owned subsidiary, had purchased the preferred shares and common shares issued by Sina Weibo Company for US$586 million, which accounted for approximately 18% of Weibo's fully diluted and diluted total shares. === Ownership === On 9 April 2013, Alibaba Group announced that it would acquire 18% of Sina Weibo for US$586 million, with the option to buy up to 30% in the future. Alibaba exercised this option when Weibo was listed on the NASDAQ in April 2014. == Users == According to iResearch's report on 30 March 2011, Sina Weibo had 56.5% of China's microblogging market based on active users and 86.6% based on browsing time over competitors such as Tencent Weibo and Baidu. According to research by Sina Corporation, the number of active users reached over 400 million by Q1 2018, making Sina Weibo the 7th platform with at least 400 million active users, and daily usage increased by 21%. As of 2017, approximately 80% of its users were in their 20s and 30s. The top 100 users had over 485 million followers combined. More than 5,000 companies and 2,700 media organizations in China use Sina Weibo. The site is maintained by a growing microblogging department of 200 employees responsible for technology, design, operations, and marketing. Sina executives invited and persuaded many Chinese celebrities to join the platform. Users now include Asian celebrities, movie stars, singers, famous business and media figures, athletes, scholars, artists, organizations, religious figures, government departments, and officials from Hong Kong, Mainland China, Malaysia, Singapore, Taiwan, and Macau, as well as some famous foreign individuals and organizations, including Kevin Rudd, Boris Johnson, David Cameron, Narendra Modi, Toshiba, and the Germany national football team. Sina Weibo has a verification program for known people and organizations. Once an account is verified, a verification badge is added beside the account name. == Features == Many of Sina Weibo's features resemble those of Twitter. A user may post with a 140-character limit (increased to 2,000 as of January 2016 with the exception of reposts and comments). An analysis of 29 million Weibo posts found the median length was 14 characters. Users may mention or talk to other people using "@UserName" formatting, add hashtags, follow other users to make their posts appear in one's own timeline, re-post with "//@UserName" similar to Twitter's retweet function "RT @UserName", select posts for one's favorites list, and verify the account if the user is a celebrity, brand, business or otherwise of public interest. URLs are automatically shortened using the domain name t.cn, akin to Twitter's t.co. Official and third-party applications can access Sina Weibo from other websites or platforms. Users may: Submit up to 18 images/video files in every post Send personal messages to followers Follow others and be followed Post "stories" like on Instagram React to posts using different emojis Receive monetary rewards that can be used in a digital store linked to Weibo View posts identified as "hot" or popular Display the location they post from Hashtags differ slightly between Sina Weibo and Twitter, using the double-hashtag "#HashName#" format (the lack of spacing between Chinese characters necessitates a closing tag). Users can own a hashtag by requesting hashtag monitoring; the company reviews these requests and responds within one to three days. Once a user owns a hashtag, they have access to a wide variety of functions available only to them on the condition that they remain active (less than 1 post per calendar week revokes these privileges). Additionally, comments appear as a list below each post. A commenter can also choose to re-post the comment, quoting the whole original post, to their own page. Unregistered users can only browse a few post

  Read more →
• 

  Metadatabase

  Metadatabase is a database model for (1) metadata management, (2) global query of independent databases, and (3) distributed data processing. The word metadatabase is an addition to the dictionary. Originally, metadata was only a common term referring simply to "data about data", such as tags, keywords, and markup headers. However, in this technology, the concept of metadata is extended to also include such data and knowledge representation as information models (e.g., relations, entities-relationships, and objects), application logic (e.g., production rules), and analytic models (e.g., simulation, optimization, and mathematical algorithms). In the case of analytic models, it is also referred to as a Modelbase. These classes of metadata are integrated with some modeling ontology to give rise to a stable set of meta-relations (tables of metadata). Individual models are interpreted as metadata and entered into these tables. As such, models are inserted, retrieved, updated, and deleted in the same manner as ordinary data do in an ordinary (relational) database. Users will also formulate global queries and requests for processing of local databases through the Metadatabase, using the globally integrated metadata. The Metadatabase structure can be implemented in any open technology for relational databases. == Significance == The Metadatabase technology is developed at Rensselaer Polytechnic Institute at Troy, New York, by a group of faculty and students (see the references at the end of the article), starting in late 1980s. Its main contribution includes the extension of the concept of metadata and metadata management, and the original approach of designing a database for metadata applications. These conceptual results continue to motivate new research and new applications. At the level of particular design, its openness and scalability is tied to that of the particular ontology proposed: It requires reverse-representation of the application models in order to save them into the meta-relations. In theory, the ontology is neutral, and it has been proven in some industrial applications. However, it needs more development to establish it for the field as an open technology. The requirement of reverse-representation is common to any global information integration technology. A way to facilitate it in the Metadatabase approach is to distribute a core portion of it at each local site, to allow for peer-to-peer translation on the fly.

  Read more →