AI For Business Guide

AI For Business Guide — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Pixel binning

Pixel binning, also known as binning, is a process image sensors of digital cameras use to combine adjacent pixels throughout an image, by summing or averaging their values, during or after readout. It improves low-light performance while still allowing for highly detailed photographs in good light. Charge from adjacent pixels in CCD or charge-coupled device image sensors and some other image sensors can be combined during readout, increasing the line rate or frame rate. In the context of image processing, binning is the procedure of combining clusters of adjacent pixels, throughout an image, into single pixels. For example, in 2×2 binning, an array of 4 pixels becomes a single larger pixel, reducing the number of pixels to 1/4 and halving the image resolution in each dimension. The result can be the sum, average, median, minimum, or maximum value of the cluster. Some systems use more advanced algorithms such as considering the values of nearby pixels, edge detection, self-claimed "AI", etc. to increase the perceived visual quality of the final downsized image. This aggregation, although associated with loss of information, reduces the amount of data to be processed, facilitating analysis. The binned image has lower resolution, but the relative noise level in each pixel is generally reduced. == History == Normally, an increase in megapixel count on a constant image sensor size would lead to a sacrifice of the surface size of the individual pixels, which would result in each pixel being able to catch less light in the same time, thus leading to a darker and/or noisier image in low light (given the same exposure time). In the past, camera manufacturers had to compromise between low-light performance and the amount of detail in good light, by dropping the megapixel count like HTC did in 2013 with their four-megapixel "UltraPixel" camera. However, this results in less detailed images in daylight where enough light is available. With pixel binning, the camera has "the best of both worlds", meaning both the benefit of high detail in good light and the benefit of high brightness in low light. In low light, the surfaces of four or more pixels can act as one large pixel that catches far more light. For example, some smartphones such as the Samsung Galaxy A15 are able to capture photographs with up to fifty megapixels in daylight. However, in low light, the individual pixels would be too small to capture the light needed for a bright image with the short exposure time available for handheld shooting. Therefore, with pixel binning activated, the 50-megapixel image sensor acts as a 12.5-megapixel image sensor, a quarter of its original resolution, with an accordingly larger surface area per pixel.
Read more →
Anaconda (Python distribution)

Anaconda is an open source data science and artificial intelligence distribution platform for the Python programming language. Developed by Anaconda, Inc., an American company founded in 2012, the platform is used to develop and manage data science and AI projects. In 2024, Anaconda Inc. has about 300 employees and 45 million users. == History == Co-founded in Austin, Texas in 2012 as Continuum Analytics by Peter Wang and Travis Oliphant, Anaconda Inc. operates from the United States and Europe. Anaconda Inc. developed Conda, a cross-platform, language-agnostic binary package manager. It also launched PyData community workshops and the Jupyter Cloud Notebook service (Wakari.io). In 2013, it received funding from DARPA. In 2015, the company had two million users including 200 of the Fortune 500 companies and raised $24 million in a Series A funding round led by General Catalyst and BuildGroup. Anaconda secured an additional $30 million in funding in 2021. Continuum Analytics rebranded as Anaconda in 2017. That year, it announced the release of Anaconda Enterprise 5, an integration with Microsoft Azure, and had over 13 million users by year's end. In 2022, it released Anaconda Business; new integrations with Snowflake and others; and the open-source PyScript. It also acquired PythonAnywhere, while Anaconda's user base exceeded 30 million in 2022. In 2023, Anaconda released Python in Excel, a new integration with Microsoft Excel, and launched PyScript.com. The company made a series of investments in AI during 2024. That February, Anaconda partnered with IBM to import its repository of Python packages into Watsonx, IBM's generative AI platform. The same year, Anaconda joined IBM's AI Alliance and released an integration with Teradata and Lenovo. In 2024, Anaconda's user base reached 45 million users and Barry Libert was named company CEO, after serving on Anaconda's board of directors. He was succeeded as CEO in October 2025 by David DeSanto, who also became a company director. In May 2025, the company introduced the first unified AI platform for Open Source, Anaconda AI Platform, a central control for AI workflows that enables customization in Python-based enterprise AI development. That July, after reaching over $150 million in a Series C funding round, Anaconda was evaluated at about $1.5 billion. == Overview == Anaconda distribution comes with over 300 packages automatically installed, and over 7,500 additional open-source packages can be installed from the Anaconda repository as well as the Conda package and virtual environment manager. It also includes a GUI, Anaconda Navigator, as a graphical alternative to the command-line interface (CLI). Conda was developed to address dependency conflicts native to the pip package manager, which would automatically install any dependent Python packages without checking for conflicts with previously installed packages (until its version 20.3, which later implemented consistent dependency resolution). The Conda package manager's historical differentiation analyzed and resolved these installation conflicts. Anaconda is a distribution of the Python programming language (and previously also R) for scientific computing (data science, machine learning applications, large-scale data processing, predictive analytics, etc.), that aims to simplify package management and deployment. Anaconda distribution includes data-science packages suitable for Windows, Linux, and macOS. Other company products include Anaconda Free, and subscription-based Starter, Business and Enterprise. Anaconda's business tier offers Package Security Manager. Package versions in Anaconda are managed by the package management system Conda, which was spun out as a separate open-source package as useful both independently and for applications other than Python. There is also a small, bootstrap version of Anaconda called Miniconda, which includes only Conda, Python, the packages they depend on, and a small number of other packages. Open source packages can be individually installed from the Anaconda repository, Anaconda Cloud (anaconda.org), or the user's own private repository or mirror, using the conda install command. Anaconda, Inc. compiles and builds the packages available in the Anaconda repository itself, and provides binaries for Windows 32/64 bit, Linux 64 bit and MacOS 64-bit (Intel, Apple Silicon). Anything available on PyPI may be installed into a Conda environment using pip, and Conda will keep track of what it has installed and what pip has installed. Custom packages can be made using the conda build command, and can be shared with others by uploading them to Anaconda Cloud, PyPI or other repositories. The default installation of Anaconda2 includes Python 2.7 and Anaconda3 includes Python 3.7. However, it is possible to create new environments that include any version of Python packaged with Conda. === Anaconda Navigator === Anaconda Navigator is a desktop graphical user interface (GUI) included in Anaconda distribution that allows users to launch applications and manage Conda packages, environments and channels without using command-line commands. Navigator can search for packages on Anaconda Cloud or in a local Anaconda Repository, install them in an environment, run the packages and update them. It is available for Windows, macOS and Linux. The following applications are available by default in Navigator: JupyterLab Jupyter Notebook QtConsole Spyder Glue Orange RStudio Visual Studio Code === Conda === Conda is an open source, cross-platform, language-agnostic package manager and environment management system that installs, runs, and updates packages and their dependencies. It was created for Python programs, but it can package and distribute software for any language, including multi-language projects. The Conda package and environment manager is included in all versions of Anaconda, Miniconda, and Anaconda Repository. == Anaconda.org == Anaconda Cloud is a package management service by Anaconda where users can find, access, store and share public and private notebooks, environments, and Conda and PyPI packages. Cloud hosts useful Python packages, notebooks and environments for a wide variety of applications. Users do not need to log in or to have a Cloud account, to search for public packages, download and install them. Users can build new Conda packages using Conda-build and then use the Anaconda Client CLI to upload packages to Anaconda.org. Notebooks users can be aided with writing and debugging code with Anaconda's AI Assistant.
Read more →
Spike (application)

Spike is a cross-platform email client and AI-powered communication app, available on Windows, MacOS, iOS, Android and the web. It has a chat-like, conversational view for emails with AI-powered inbox management and integrated collaboration features. Depending on the selected plan, it can be used solely as an email application or as a full suite of business communication tools. == History == Founded in 2013 by Erez Pilosof and Dvir Ben-Aroya, Spike is a software application that puts existing e-mails into a multimedia messaging, chat-like interface enhanced with video and voice calls. The application was initially named Hop. In 2019, the developers completed a $5 million funding round including investment from Wix.com and NFX Capital. In 2020, Spike raised $8m in a Series A funding round led by Insight Partners with the participation from previous rounds' investors. In 2021 Spike announced a collaboration with Meta to launch on the Oculus Store and would become one of the first productivity apps to launch in Meta's new virtual world, known as the Metaverse. In June 2023, the company introduced its corporate offering — Teamspace, a corporate communication platform for teams with features such as company-wide channels for broad conversations, private groups for specific topics or projects, direct one-on-one conversations, video meetings, file collaboration, AI-powered email messaging, and custom email domain. It supports file management, search capabilities, and project management. Built on open-protocol technology, Spike Teamspace enables users to send and receive messages from all email providers. Regardless of whether the other party is using Spike. == Company operations == Spike is developed and operated by SpikeNow LTD. Dvir Ben Aroya serves as Spike’s CEO and Erez Pilosof is the CTO. The company is headquartered in Tel Aviv, Israel. == Mode of use == The app enables users to organize email into three types of "conversations,"a traditional inbox/sent format, by subject, or by people. Spike users can also make audio and video calls to each other, and other features include a calendar, contact list, and Groups. Spike is available for Microsoft Windows, MacOS, iOS and Android, and as a web version, and works with Gmail, Outlook, Exchange, iCloud, Yahoo! Mail and IMAP email providers. == Features == Since 2023, the platform features an AI-driven assistant, Magic AI, for customized email creation, document summarization, research, content generation, advanced note-taking, project management, and real-time translation. Since 2023, Spike offers custom email domain management. It supports team collaboration through Channels, uniting members globally with access to historical messages, and combines email with real-time messaging via Conversational Email. The Shared Inbox allows team collaboration on emails, while Groups support private conversations and invitations. It also features integrated video meetings, real-time collaboration on documents and notes, and email hosting with custom domains. Super Search enables retrieval of various content, and the Priority Inbox organizes emails by priority. Collaborative Tasks offer real-time updates and tracking. The platform allows voice message sending from mobile devices and integrates multiple calendar platforms into a unified schedule. File Management optimizes attachment handling, and the Unified Inbox consolidates emails from multiple accounts. Spike ensures data security with AES-256 encryption and private keys. The platform features AI-powered inbox management and communication tools. In May 2025, Spike launched its AI Feed feature, which automatically summarizes unread messages in a unified stream and enables bulk email actions. Additional AI capabilities include email composition assistance, document summarization, content generation, note-taking enhancement, and real-time translation.
Read more →
XLeratorDB

XLeratorDB is a suite of database function libraries that enable Microsoft SQL Server to perform a wide range of additional (non-native) business intelligence and ad hoc analytics. The libraries, which are embedded and run centrally on the database, include more than 450 individual functions similar to those found in Microsoft Excel spreadsheets. The individual functions are grouped and sold as six separate libraries based on usage: finance, statistics, math, engineering, unit conversions and strings. WestClinTech, the company that developed XLeratorDB, claims it is "the first commercial function package add-in for Microsoft SQL Server." == Company history == WestClinTech (LLC), founded by software industry veterans Charles Flock and Joe Stampf in 2008, is located in Irvington, New York, United States. Flock was a co-founder of The Frustum Group, developer of the OPICS enterprise banking and trading platform, which was acquired by London-based Misys, PLC in 1996. Stampf joined Frustum in 1994 and with Flock remained active with the company after acquisition, helping to develop successive generations of OPICS now employed by over 150 leading financial institutions worldwide. Following a full year of research, development and testing, WestClinTech introduced and recorded its first commercial sale of XLeratorDB in April 2009. In September 2009, XLeratorDB became available to all Federal agencies through NASA's Strategic Enterprise-Wide Procurement (SEWP-IV) program, a government-wide acquisition contract. == Technology == XLeratorDB uses Microsoft SQL CLR(Common Language Runtime) technology. SQL CLR allows managed code to be hosted by, and run in, the Microsoft SQL Server environment. SQL CLR relies on the creation, deployment and registration of .NET Framework assemblies that are physically stored in managed code dynamic-link libraries (DLL). The assemblies may contain .NET namespaces, classes, functions, and properties. Because managed code compiles to native code prior to execution, functions using SQL CLR can achieve significant performance increases versus the equivalent functions written in T-SQL in some scenarios. XLeratorDB requires Microsoft SQL Server 2005 or SQL Server 2005 Express editions, or later (compatibility mode 90 or higher). The product installs with PERMISSION_SET=SAFE. SAFE mode, the most restrictive permission set, is accessible by all users. Code executed by an assembly with SAFE permissions cannot access external system resources such as files, the network, the internet, environment variables, or the registry. == Functions == In computer science, a function is a portion of code within a larger program which performs a specific task and is relatively independent of the remaining code. As used in database and spreadsheet applications these functions generally represent mathematical formulas widely used across a variety of fields. While this code may be user-generated, it is also embedded as a pre-written sub-routine in applications. These functions are typically identified by common nomenclature which corresponds to their underlying operations: e.g. IRR identifies the function which calculates Internal Rate of Return on a series of periodic cash flows. === Function uses === As subroutines, functions can be integrated and used in a variety of ways, and as part of larger, more complicated applications. Within large enterprise applications they may, for example, play an important role in defining business rules or risk management parameters, while remaining virtually invisible to end users. Within database management systems and spreadsheets, however, these kinds of functions also represent discrete sets of tools; they can be accessed directly and utilized on a stand-alone basis, or in more complex, user-defined configurations. In this context, functions can be used for business intelligence and ad hoc analysis of data in fields such as finance, statistics, engineering, math, etc. === Function types === XLeratorDB uses three kinds of functions to perform analytic operations: scalar, aggregate, and a hybrid form which WestClinTech calls Range Queries. Scalar functions take a single value, perform an operation and return a single value. An example of this type of function is LOG, which returns the logarithm of a number to a specified base. Aggregate functions operate on a series of values but return a single, summarizing value. An example of this type of function is AVG, which returns the average of values in a specified group. In XLeratorDB there are some functions which have characteristics of aggregate functions (operating on multiple series of values) but cannot be processed in SQL CLR using single column inputs, such as AVG does. For example, irregular internal rate of return (XIRR), a financial function, operates on a collection of cash flow values from one column, but must also apply variable period lengths from another column and an initial iterative assumption from a third, in order to return a single, summarizing value. WestClinTech documentation notes that Range Queries specify the data to be included in the result set of the function independently of the WHERE clause associated with the T-SQL statement, by incorporating a SELECT statement into the function as a string argument; the function then traps that SELECT statement, executes it internally and processes the result. Some XLeratorDB functions that employ Range Queries are: NPV, XNPV, IRR, XIRR, MIRR, MULTINOMIAL, and SERIESSUM. Within the application these functions are identified by a "_q" naming convention: e.g. NPV_q, IRR_q, etc. == Analytic functions == === SQL Server functions === Microsoft SQL Server is the #3 selling database management system (DBMS), behind Oracle and IBM. (While versions of SQL Server have been on the market since 1987, XLeratorDB is compatible with only the 2005 edition and later.) Like all major DBMS, SQL Server performs a variety of data mining operations by returning or arraying data in different views (also known as drill-down). In addition, SQL Server uses Transact-SQL (T-SQL) to execute four major classes of pre-defined functions in native mode. Functions operating on the DBMS offer several advantages over client layer applications like Excel: they utilize the most up-to-date data available; they can process far larger quantities of data; and, the data is not subject to exporting and transcription errors. SQL Server 2008 includes a total of 58 functions that perform relatively basic aggregation (12), math (23) and string manipulation (23) operations useful for analytics; it includes no native functions that perform more complex operations directly related to finance, statistics or engineering. === Excel functions === Microsoft Excel, a component of Microsoft Office suite, is one of the most widely used spreadsheet applications on the market today. In addition to its inherent utility as a stand-alone desktop application, Excel overlaps and complements the functionality of DBMS in several ways: storing and arraying data in rows and columns; performing certain basic tasks such as pivot table and aggregating values; and facilitating sharing, importing and exporting of database data. Excel's chief limitation relative to a true database is capacity; Excel 2003 is limited to some 65k rows and 256 columns; Excel 2007 extends this capacity to roughly 1million rows and 16k columns. By comparison, SQL Server is able to manage over 500k terabytes of memory. Excel offers, however, an extensive library of specialized pre-written functions which are useful for performing ad hoc analysis on database data. Excel 2007 includes over 300 of these pre-defined functions, although customized functions can also be created by users, or imported from third party developers as add-ons. Excel functions are grouped by type: === Excel business intelligence functions === Operating on the client computing layer Excel plays an important role as a business intelligence tool because it: performs a wide array of complex analytic functions not native to most DBMS software offers far greater ad hoc reporting and analytic flexibility than most enterprise software provides a medium for sharing and collaborating because of its ubiquity throughout the enterprise Microsoft reinforces this positioning with Business Intelligence documentation that positions Excel in a clearly pivotal role. === XLeratorDB vs. Excel functions === While operating within the database environment, XLeratorDB functions utilize the same naming conventions and input formats, and in most cases, return the same calculation results as Excel functions. XLeratorDB, coupled with SQL Server's native capabilities, compares to Excel's function sets as follows:
Read more →
Princh

Princh is a Danish software company, which is headquartered in Aarhus, Denmark. Founded in 2015, Princh develops cloud printing and electronic payment products. The company is headquartered in the city of Aarhus. While utilizing a smartphone or web app, users can locate a nearby printer to their current location, get directions to access said printer, and/or authorize a print and pay for the print job in question. The product is available as a native mobile apps for Android and iOS, as well as on web and desktop products for businesses and libraries. The app connects a network of printer owners and users around the world. Princh supports an array of printable files. == History == The company was founded in 2015. The company is currently based in the southern part of Aarhus. The Princh printing service was officially launched on June 23, 2015. Currently, Princh is available as a service in a multitude of locations such as print shops, libraries, hotels, or universities. Princh is a popular printing and payment product among libraries and can among other places be found in Denmark, Sweden, Norway, Germany, United Kingdom, United States, and Canada. == How it works == With the Princh app, users will be able to locate their nearest printer. Once the user is at the printer, the user chooses the document to be printed out and shares it with the Princh app. The user then selects the desired nearby printer entering the printer ID number or scanning the QR-code located on top of the printer, pays electronically and the print job is processed by the printer. Printer owners get access to a personal control panel where they can set printing prices and monitor all Princh activity for their business. == Notes and references ==
Read more →
Color balance

In photography and image processing, color balance is the global adjustment of the intensities of the colors (typically red, green, and blue primary colors). An important goal of this adjustment is to render specific colors – particularly neutral colors like white or grey – correctly. Hence, the general method is sometimes called gray balance, neutral balance, or white balance. Color balance changes the overall mixture of colors in an image and is used for color correction. Generalized versions of color balance are used to correct colors other than neutrals or to deliberately change them for effect. White balance is one of the most common kinds of balancing, and is when colors are adjusted to make a white object (such as a piece of paper or a wall) appear white and not a shade of any other colour. Image data acquired by sensors – either film or electronic image sensors – must be transformed from the acquired values to new values that are appropriate for color reproduction or display. Several aspects of the acquisition and display process make such color correction essential – including that the acquisition sensors do not match the sensors in the human eye, that the properties of the display medium must be accounted for, and that the ambient viewing conditions of the acquisition differ from the display viewing conditions. The color balance operations in popular image editing applications usually operate directly on the red, green, and blue channel pixel values, without respect to any color sensing or reproduction model. In film photography, color balance is typically achieved by using color correction filters over the lights or on the camera lens. == Generalized color balance == Sometimes the adjustment to keep neutrals neutral is called white balance, and the phrase color balance refers to the adjustment that in addition makes other colors in a displayed image appear to have the same general appearance as the colors in an original scene. It is particularly important that neutral (gray, neutral, white) colors in a scene appear neutral in the reproduction. === Psychological color balance === Humans relate to flesh tones more critically than other colors. Trees, grass and sky can all be off without concern, but if human flesh tones are 'off' then the human subject can look sick or dead. To address this critical color balance issue, the tri-color primaries themselves are formulated to not balance as a true neutral color. The purpose of this color primary imbalance is to more faithfully reproduce the flesh tones through the entire brightness range. == Illuminant estimation and adaptation == Most digital cameras have means to select color correction based on the type of scene lighting, using either manual lighting selection, automatic white balance, or custom white balance. The algorithms for these processes perform generalized chromatic adaptation. Many methods exist for color balancing. Setting a button on a camera is a way for the user to indicate to the processor the nature of the scene lighting. Another option on some cameras is a button which one may press when the camera is pointed at a gray card or other neutral colored object. This captures an image of the ambient light, which enables a digital camera to set the correct color balance for that light. There is a large literature on how one might estimate the ambient lighting from the camera data and then use this information to transform the image data. A variety of algorithms have been proposed, and the quality of these has been debated. A few examples and examination of the references therein will lead the reader to many others. Examples are Retinex, an artificial neural network or a Bayesian method. == Chromatic colors == Color balancing an image affects not only the neutrals, but other colors as well. An image that is not color balanced is said to have a color cast, as everything in the image appears to have been shifted towards one color. Color balancing may be thought in terms of removing this color cast. Color balance is also related to color constancy. Algorithms and techniques used to attain color constancy are frequently used for color balancing, as well. Color constancy is, in turn, related to chromatic adaptation. Conceptually, color balancing consists of two steps: first, determining the illuminant under which an image was captured; and second, scaling the components (e.g., R, G, and B) of the image or otherwise transforming the components so they conform to the viewing illuminant. Viggiano found that white balancing in the camera's native RGB color model tended to produce less color inconstancy (i.e., less distortion of the colors) than in monitor RGB for over 4000 hypothetical sets of camera sensitivities. This difference typically amounted to a factor of more than two in favor of camera RGB. This means that it is advantageous to get color balance right at the time an image is captured, rather than edit later on a monitor. If one must color balance later, balancing the raw image data will tend to produce less distortion of chromatic colors than balancing in monitor RGB. == Mathematics of color balance == Color balancing is sometimes performed on a three-component image (e.g., RGB) using a 3x3 matrix. This type of transformation is appropriate if the image was captured using the wrong white balance setting on a digital camera, or through a color filter. Changing the color balance of an image can improve classifier results on a trained ML model. === Scaling monitor R, G, and B === In principle, one wants to scale all relative luminances in an image so that objects which are believed to be neutral appear so. If, say, a surface with R = 240 {\displaystyle R=240} was believed to be a white object, and if 255 is the count which corresponds to white, one could multiply all red values by 255/240. Doing analogously for green and blue would result, at least in theory, in a color balanced image. In this type of transformation the 3x3 matrix is a diagonal matrix. [ R G B ] = [ 255 / R w ′ 0 0 0 255 / G w ′ 0 0 0 255 / B w ′ ] [ R ′ G ′ B ′ ] {\displaystyle \left[{\begin{array}{c}R\\G\\B\end{array}}\right]=\left[{\begin{array}{ccc}255/R'_{w}&0&0\\0&255/G'_{w}&0\\0&0&255/B'_{w}\end{array}}\right]\left[{\begin{array}{c}R'\\G'\\B'\end{array}}\right]} where R {\displaystyle R} , G {\displaystyle G} , and B {\displaystyle B} are the color balanced red, green, and blue components of a pixel in the image; R ′ {\displaystyle R'} , G ′ {\displaystyle G'} , and B ′ {\displaystyle B'} are the red, green, and blue components of the image before color balancing, and R w ′ {\displaystyle R'_{w}} , G w ′ {\displaystyle G'_{w}} , and B w ′ {\displaystyle B'_{w}} are the red, green, and blue components of a pixel which is believed to be a white surface in the image before color balancing. This is a simple scaling of the red, green, and blue channels, and is why color balance tools in Photoshop have a white eyedropper tool. It has been demonstrated that performing the white balancing in the phosphor set assumed by sRGB tends to produce large errors in chromatic colors, even though it can render the neutral surfaces perfectly neutral. === Scaling X, Y, Z === If the image may be transformed into CIE XYZ tristimulus values, the color balancing may be performed there. This has been termed a "wrong von Kries" transformation. Although it has been demonstrated to offer usually poorer results than balancing in monitor RGB, it is mentioned here as a bridge to other things. Mathematically, one computes: [ X Y Z ] = [ X w / X w ′ 0 0 0 Y w / Y w ′ 0 0 0 Z w / Z w ′ ] [ X ′ Y ′ Z ′ ] {\displaystyle \left[{\begin{array}{c}X\\Y\\Z\end{array}}\right]=\left[{\begin{array}{ccc}X_{w}/X'_{w}&0&0\\0&Y_{w}/Y'_{w}&0\\0&0&Z_{w}/Z'_{w}\end{array}}\right]\left[{\begin{array}{c}X'\\Y'\\Z'\end{array}}\right]} where X {\displaystyle X} , Y {\displaystyle Y} , and Z {\displaystyle Z} are the color-balanced tristimulus values; X w {\displaystyle X_{w}} , Y w {\displaystyle Y_{w}} , and Z w {\displaystyle Z_{w}} are the tristimulus values of the viewing illuminant (the white point to which the image is being transformed to conform to); X w ′ {\displaystyle X'_{w}} , Y w ′ {\displaystyle Y'_{w}} , and Z w ′ {\displaystyle Z'_{w}} are the tristimulus values of an object believed to be white in the un-color-balanced image, and X ′ {\displaystyle X'} , Y ′ {\displaystyle Y'} , and Z ′ {\displaystyle Z'} are the tristimulus values of a pixel in the un-color-balanced image. If the tristimulus values of the monitor primaries are in a matrix P {\displaystyle \mathbf {P} } so that: [ X Y Z ] = P [ L R L G L B ] {\displaystyle \left[{\begin{array}{c}X\\Y\\Z\end{array}}\right]=\mathbf {P} \left[{\begin{array}{c}L_{R}\\L_{G}\\L_{B}\end{array}}\right]} where L R {\displaystyle L_{R}} , L G {\displaystyle L_{G}} , and L B {\displaystyle L_{B}} are the un-gamma corrected monitor RGB, one may use: [ L R L G L B ] = P − 1 [ X w / X w ′ 0 0
Read more →
System context diagram

A system context diagram in engineering is a diagram that defines the boundary between the system, or part of a system, and its environment, showing the entities that interact with it. This diagram is a high level view of a system. It is similar to a block diagram. == Overview == System context diagrams show a system, as a whole and its inputs and outputs from/to external factors. According to Kossiakoff and Sweet (2011): System Context Diagrams ... represent all external entities that may interact with a system ... Such a diagram pictures the system at the center, with no details of its interior structure, surrounded by all its interacting systems, environments and activities. The objective of the system context diagram is to focus attention on external factors and events that should be considered in developing a complete set of systems requirements and constraints. System context diagrams are used early in a project to get agreement on the scope under investigation. Context diagrams are typically included in a requirements document. These diagrams must be read by all project stakeholders and thus should be written in plain language, so the stakeholders can understand items within the document. == Building blocks == Context diagrams can be developed with the use of two types of building blocks: Entities (Actors): labeled boxes; one in the center representing the system, and around it multiple boxes for each external actor Relationships: labeled lines between the entities and system For example, "customer places order." Context diagrams can also use many different drawing types to represent external entities. They can use ovals, stick figures, pictures, clip art or any other representation to convey meaning. Decision trees and data storage are represented in system flow diagrams. A context diagram can also list the classifications of the external entities as one of a set of simple categories (Examples:), which add clarity to the level of involvement of the entity with regards to the system. These categories include: Active: Dynamic to achieve some goal or purpose (Examples: "Article readers" or "customers"). Passive: Static external entities which infrequently interact with the system (Examples: "Article editors" or "database administrator"). Cooperative: Predictable external entities which are used by the system to bring about some desired outcome (Examples: "Internet service providers" or "shipping companies"). Autonomous (Independent): External entities which are separated from the system, but affect the system indirectly, by means of imposed constraints or similar influences (Examples: "regulatory committees" or "standards groups"). == Alternatives == The best system context diagrams are used to display how a system interoperates at a very high level, or how systems operate and interact logically. The system context diagram is a necessary tool in developing a baseline interaction between systems and actors; actors and a system or systems and systems. Alternatives to the system context diagram are: Architecture Interconnect Diagram: The figure gives an example of an Architecture Interconnect Diagram: A representation of the Albuquerque regional ITS architecture interconnects for the Albuquerque Police Department that was generated using the Turbo Architecture tool is shown in the figure. Each block represents an ITS inventory element, including the name of the stakeholder in the top shaded portion. The interconnect lines between elements are solid or dashed, indicating existing or planned connections. Business Model Canvas, a strategic management template for developing new or documenting existing business models. It is a visual chart with elements describing a firm's value proposition, infrastructure, customers, and finances.[1] It assists firms in aligning their activities by illustrating potential trade-offs. Enterprise data model: this type of data model according to Simsion (2005) can contain up to 50 to 200 entity classes, which results from specific "high level of generalization in data modeling". IDEF0 Top Level Context Diagram: The IDEF0 process starts with the identification of the prime function to be decomposed. This function is identified on a "Top Level Context Diagram" that defines the scope of the particular IDEF0 analysis. Problem Diagrams (Problem Frames): In addition to the kinds of things shown on a context diagram, a problem diagram shows requirements and requirements references. Use case diagram: One of the Unified Modeling Language diagrams. They also represent the scope of the project at a similar level of abstraction. - Use Cases, however, tend to focus more on the goals of 'actors' who interact with the system, and do not specify any solution. Use Case diagrams represent a set of Use Cases, which are textual descriptions of how an actor achieves the goal of a use case. for Example Customer Places Order. ArchiMate: ArchiMate is an open and independent enterprise architecture modeling language to support the description, analysis and visualization of architecture within and across business domains in an unambiguous way. Most of these diagrams work well as long as a limited number of interconnects will be shown. Where twenty or more interconnects must be displayed, the diagrams become quite complex and can be difficult to read.
Read more →
NumPy

NumPy (pronounced NUM-py) is a library for the Python programming language, adding support for large, multi-dimensional arrays and matrices, along with a large collection of high-level mathematical functions to operate on these arrays. The predecessor of NumPy, Numeric, was originally created by Jim Hugunin with contributions from several other developers. In 2005, Travis Oliphant created NumPy by incorporating features of the competing Numarray into Numeric, with extensive modifications. NumPy is open-source software and has many contributors. NumPy is fiscally sponsored by NumFOCUS. == History == === matrix-sig === The Python programming language was not originally designed for numerical computing, but attracted the attention of the scientific and engineering community early on. In 1995 the special interest group (SIG) matrix-sig was founded with the aim of defining an array computing package; among its members was Python designer and maintainer Guido van Rossum, who extended Python's syntax (in particular the indexing syntax) to make array computing easier. === Numeric === An implementation of a matrix package was completed by Jim Fulton, then expanded to support multi-dimensional arrays by Jim Hugunin and called Numeric (also variously known as the "Numerical Python extensions" or "NumPy"), with influences from the APL family of languages, Basis, MATLAB, FORTRAN, S and S+, and others. Hugunin, a graduate student at the Massachusetts Institute of Technology (MIT), joined the Corporation for National Research Initiatives (CNRI) in 1997 to work on JPython, leaving Paul Dubois of Lawrence Livermore National Laboratory (LLNL) to take over as maintainer. Other early contributors include David Ascher, Konrad Hinsen and Travis Oliphant. === Numarray === A new package called Numarray was written as a more flexible replacement for Numeric. Like Numeric, it too is now deprecated. Numarray had faster operations for large arrays, but was slower than Numeric on small ones, so for a time both packages were used in parallel for different use cases. The last version of Numeric (v24.2) was released on 11 November 2005, while the last version of numarray (v1.5.2) was released on 24 August 2006. There was a desire to get Numeric into the Python standard library, but Guido van Rossum decided that the code was not maintainable in its state then. === NumPy === In early 2005, NumPy developer Travis Oliphant wanted to unify the community around a single array package and ported Numarray's features to Numeric, releasing the result as NumPy 1.0 in 2006. This new project was part of SciPy. To avoid installing the large SciPy package just to get an array object, this new package was separated and called NumPy. Support for Python 3 was added in 2011 with NumPy version 1.5.0. In 2011, PyPy started development on an implementation of the NumPy API for PyPy. As of 2023, it is not yet fully compatible with NumPy. == Features == NumPy targets the CPython reference implementation of Python, which is a non-optimizing bytecode interpreter. Mathematical algorithms written for this version of Python often run much slower than compiled equivalents due to the absence of compiler optimization. NumPy addresses the slowness problem partly by providing multidimensional arrays and functions and operators that operate efficiently on arrays; using these requires rewriting some code, mostly inner loops, using NumPy. Using NumPy in Python gives functionality comparable to MATLAB since they are both interpreted, and they both allow the user to write fast programs as long as most operations work on arrays or matrices instead of scalars. In comparison, MATLAB boasts a large number of additional toolboxes, notably Simulink, whereas NumPy is intrinsically integrated with Python, a more modern and complete programming language. Moreover, complementary Python packages are available; SciPy is a library that adds more MATLAB-like functionality and Matplotlib is a plotting package that provides MATLAB-like plotting functionality. Although MATLAB can perform sparse matrix operations, NumPy alone cannot perform such operations and requires the use of the scipy.sparse library. Internally, both MATLAB and NumPy rely on BLAS and LAPACK for efficient linear algebra computations. Python bindings of the widely used computer vision library OpenCV utilize NumPy arrays to store and operate on data. Since images with multiple channels are simply represented as three-dimensional arrays, indexing, slicing or masking with other arrays are very efficient ways to access specific pixels of an image. The NumPy array as universal data structure in OpenCV for images, extracted feature points, filter kernels and many more vastly simplifies the programming workflow and debugging. Importantly, many NumPy operations release the global interpreter lock, which allows for multithreaded processing. NumPy also provides a C API, which allows Python code to interoperate with external libraries written in low-level languages. === The ndarray data structure === The core functionality of NumPy is its "ndarray", for n-dimensional array, data structure. These arrays are strided views on memory. In contrast to Python's built-in list data structure, these arrays are homogeneously typed: all elements of a single array must be of the same type. Such arrays can also be views into memory buffers allocated by C/C++, Python, and Fortran extensions to the CPython interpreter without the need to copy data around, giving a degree of compatibility with existing numerical libraries. This functionality is exploited by the SciPy package, which wraps a number of such libraries (notably BLAS and LAPACK). NumPy has built-in support for memory-mapped ndarrays. === Limitations === Inserting or appending entries to an array is not as trivially possible as it is with Python's lists. The np.pad(...) routine to extend arrays actually creates new arrays of the desired shape and padding values, copies the given array into the new one and returns it. NumPy's np.concatenate([a1,a2]) operation does not actually link the two arrays but returns a new one, filled with the entries from both given arrays in sequence. Reshaping the dimensionality of an array with np.reshape(...) is only possible as long as the number of elements in the array does not change. These circumstances originate from the fact that NumPy's arrays must be views on contiguous memory buffers. Algorithms that are not expressible as a vectorized operation will typically run slowly because they must be implemented in "pure Python", while vectorization may increase memory complexity of some operations from constant to linear, because temporary arrays must be created that are as large as the inputs. Runtime compilation of numerical code has been implemented by several groups to avoid these problems; open source solutions that interoperate with NumPy include numexpr and Numba. Cython and Pythran are static-compiling alternatives to these. Many modern large-scale scientific computing applications have requirements that exceed the capabilities of the NumPy arrays. For example, NumPy arrays are usually loaded into a computer's memory, which might have insufficient capacity for the analysis of large datasets. Further, NumPy operations are executed on a single CPU. However, many linear algebra operations can be accelerated by executing them on clusters of CPUs or of specialized hardware, such as GPUs and TPUs, which many deep learning applications rely on. As a result, several alternative array implementations have arisen in the scientific python ecosystem over the recent years, such as Dask for distributed arrays and TensorFlow or JAX for computations on GPUs. Because of its popularity, these often implement a subset of NumPy's API or mimic it, so that users can change their array implementation with minimal changes to their code required. A library named CuPy, accelerated by Nvidia's CUDA framework, has also shown potential for faster computing, being a 'drop-in replacement' of NumPy. == Examples == NumPy is conventionally imported as np. === Basic operations === === Universal functions === === Linear algebra === === Multidimensional arrays === === Incorporation with OpenCV === === Nearest-neighbor search === Functional Python and vectorized NumPy version. === F2PY === Quickly wrap native code for faster scripts.
Read more →
Nouvelle AI

Nouvelle artificial intelligence (Nouvelle AI) is an approach to artificial intelligence pioneered in the 1980s by Rodney Brooks, who was then part of MIT artificial intelligence laboratory. Nouvelle AI differs from classical AI by aiming to produce robots with intelligence levels similar to insects. Researchers believe that intelligence can emerge organically from simple behaviors as these intelligences interacted with the "real world", instead of using the constructed worlds which symbolic AIs typically needed to have programmed into them. == Motivation == The differences between nouvelle AI and symbolic AI are apparent in early robots Shakey and Freddy. These robots contained an internal model (or "representation") of their micro-worlds consisting of symbolic descriptions. As a result, this structure of symbols had to be renewed as the robot moved or the world changed. Shakey's planning programs assessed the program structure and broke it down into the necessary steps to complete the desired action. This level of computation required a large amount time to process, so Shakey typically performed its tasks very slowly. Symbolic AI researchers had long been plagued by the problem of updating, searching, and otherwise manipulating the symbolic worlds inside their AIs. A nouvelle system refers continuously to its sensors rather than to an internal model of the world. It processes the external world information it needs from the senses when it is required. As Brooks puts it, "the world is its own best model--always exactly up to date and complete in every detail." A central idea of nouvelle AI is that simple behaviors combine to form more complex behaviors over time. For example, simple behaviors can include elements like "move forward" and "avoid obstacles." A robot using nouvelle AI with simple behaviors like collision avoidance and moving toward a moving object could possibly come together to produce a more complex behavior like chasing a moving object. === The frame problem === The frame problem describes an issue with using first-order logic (FOL) to express facts about a robot in the world. Representing the state of a robot with traditional FOL requires the use of many axioms (symbolic language) to imply that things about an environment do not change arbitrarily. Nouvelle AI seeks to sidestep the frame problem by dispensing with filling the AI or robot with volumes of symbolic language and instead letting more complex behaviors emerge by combining simpler behavioral elements. === Embodiment === The goal of traditional AI was to build intelligences without bodies, which would only have been able to interact with the world via keyboard, screen, or printer. However, nouvelle AI attempts to build embodied intelligence situated in the real world. Brooks quotes approvingly from the brief sketches that Turing gave in 1948 and 1950 of the "situated" approach. Turing wrote of equipping a machine "with the best sense organs that money can buy" and teaching it "to understand and speak English" by a process that would "follow the normal teaching of a child." This approach was contrasted to the others where they focused on abstract activities such as playing chess. == Brooks' robots == === Insectoid robots === Brooks focused on building robots that acted like simple insects while simultaneously working to remove some traditional AI characteristics. He created insect-like robots, named Allen and Herbert after cognitive science and AI pioneers Allen Newell and Herbert A. Simon. Brooks's insectoid robots contained no internal models of the world. Herbert, for example, discarded a high volume of the information received from its sensors and never stored information for more than two seconds. ==== Allen ==== Allen had a ring of twelve ultrasonic sonars as its primary sensors and three independent behavior-producing modules. These modules were programmed to avoid both stationary and moving objects. With only this module activated, Allen stayed in the middle of a room until an object approached and then it ran away while avoiding obstacles in its way. ==== Herbert ==== Herbert used infrared sensors to avoid obstacles and a laser system to collect 3D data over a distance of about 12 feet. Herbert also carried a number of simple sensors in its "hand." The robot's testing ground was the real world environment of the busy offices and workspaces of the MIT AI lab where it searched for empty soda cans and carried them away, a seemingly goal-oriented activity that emerged as a result of 15 simple behavior units combining. As a parallel, Simon noted that an ant's complicated path is due to the structure of its environment rather than the depth of its thought processes. ==== Other insectoid robots ==== Other robots by Brooks' team were Genghis and Squirt. Genghis had six legs and was able to walk over rough terrain and follow a human. Squirt's behavior modules had it stay in dark corners until it heard a noise, then it would begin to follow the source of the noise. Brooks agreed that the level of nouvelle AI had come near the complexity of a real insect, which raised a question about whether or not insect level-behavior was and is a reasonable goal for nouvelle AI. === Humanoid robots === Brooks' own recent work has taken the opposite direction to that proposed by Von Neumann in the quotations "theorists who select the human nervous system as their model are unrealistically picking 'the most complicated object under the sun,' and that there is little advantage in selecting instead the ant, since any nervous system at all exhibits exceptional complexity." ==== Cog ==== In the 1990s, Brooks decided to pursue the goal of human-level intelligence and, with Lynn Andrea Stein, built a humanoid robot called Cog. Cog is a robot with an extensive collection of sensors, a face, and arms (among other features) that allow it to interact with the world and gather information and experience so as to assemble intelligence organically in the manner described above by Turing. The team believed that Cog would be able to learn and able to find a correlation between the sensory information it received and its actions, and to learn common sense knowledge on its own. As of 2003, all development of the project had ceased.
Read more →
Oracle Cloud

Oracle Cloud is a cloud computing service offered by Oracle Corporation providing servers, storage, network, applications and services through a global network of Oracle Corporation managed data centers. The company allows these services to be provisioned on demand over the Internet. Oracle Cloud provides infrastructure as a service (IaaS), platform as a service (PaaS), software as a service (SaaS), and data as a service (DaaS). These services are used to build, deploy, integrate, and extend applications in the cloud. This platform supports numerous open standards (SQL, HTML5, REST, etc.), open-source applications (Kubernetes, Spark, Hadoop, Kafka, MySQL, Terraform, etc.), and a variety of programming languages, databases, tools, and frameworks including Oracle-specific, open source, and third-party software and systems. == Services == === Infrastructure as a Service (IaaS) and Platform as a Service (PaaS) === Oracle's cloud infrastructure was made generally available (GA) on October 20, 2016 under the name "Oracle Bare Metal Cloud Services". Oracle Bare Metal Cloud Services was rebranded as Oracle Cloud Infrastructure in 2018 and dubbed Oracle's "Generation 2 Cloud" at Oracle OpenWorld 2018. Oracle Cloud Infrastructure offerings include the following services: Compute: The company provides Virtual Machine Instances to provide different shapes (VM sizes) catering to different types of workloads and performance characteristics. They also provide on-demand Bare metal servers and Bare metal GPU servers, without a hypervisor. In 2016, Oracle Cloud Infrastructure launched with bare metal instances with Intel processors. These first bare metal instances offered were powered by Intel servers. In 2018, Oracle Cloud added bare metal instances powered by AMD processors, followed by Ampere Cloud-native processors in 2021. In 2021, Oracle also released its first VM-based compute instances based on Arm processors. Storage: The platform provides block volumes, file storage, object storage, and archive storage for database, analytics, content, and other applications across common protocols and APIs. Networking: This cloud platform provides network with fully configurable IP addresses, subnets, routing, and firewalls to support new or existing private networks with end-to-end security. Governance: For auditing, identity and access management, the platform has data integrity checks, traceability, and access management features. Database Management / Data Management: Oracle offers a data management platform for database workloads as well as hyper-scale big data and streaming workloads including OLTP, data warehousing, Spark, machine learning, text search, image analytics, data catalog, and deep learning. The platform allows Oracle, MySQL, and NoSQL databases to be deployed on demand as managed cloud services. Oracle Databases uniquely offer the Oracle Autonomous Database (optimized for data warehouse, transaction processing, or JSON), the Exadata shape, as well as Real Application Clusters (RAC). Load Balancing: The cloud platform offers load balancing capability to automatically route traffic across fault domains and availability domains for high availability and fault-tolerance for hosted applications. Edge Services: These services can monitor the path between users and resources and adapt to changes and outages. They include Domain Name System (DNS) services from Oracle's acquisition of Dyn. FastConnect: The cloud platform provides private connectivity across on-premises and cloud networks through providers like Equinix, AT&T, and Colt. Application Development: For application development, the company's cloud offers an open, standards-based application development platform to build, deploy, and manage API-first, mobile-first cloud applications. This platform supports container-native, cloud-native, and low code development. This platform also provides a DevOps platform for CI/CD, diagnostics for Java applications, and integration with SaaS and on-prem applications. Services include Java, mobile, digital assistants (evolution from chatbots), messaging, application container cloud, developer cloud, visual builder, API catalog, AI platform, DataScience.com (Oracle acquired) and blockchain. Integration: This is a platform offering with adapters to integrate on-premise and cloud applications. Capabilities include data integration and replication, API management, integration analytics, along with data migration and integration. They offer services such as data integration platform cloud, data integrator cloud service, GoldenGate cloud service, integration cloud, process cloud service, API platform cloud service, apiary cloud service, and SOA cloud service. Business Analytics: The company provides this business analytics platform which can analyze and generate insights from data across various applications, data warehouses, and data lakes. The services offered include analytics cloud, business intelligence, big data discovery, big data preparation, data visualization, and essbase. Security: The Oracle Cloud Platform provides identity and security applications for providing secure access and monitoring of hybrid cloud environment and addressing IT governance and compliance requirements. This platform delivers an identity SOC (Security Operations Center) through a combined offering of SIEM, UEBA, CASB, and IDaaS. The services offered include Identity Cloud Service and CASB Cloud Service. Management: The platform provides an integrated monitoring, management, and analytics platform. This platform also uses machine learning and big data on the operational data set. The platform is used to improve IT stability, prevent application outages, improve DevOps, and harden security. Services offered include Application Performance Monitoring, Infrastructure Monitoring, Log Analytics, Orchestration, IT Analytics, Configuration and Compliance, Security Monitoring, and Analytics. Content and Experience: This is a platform for content, website, and workflow management. This service is used to provide content collaboration and web presence. This tool comes integrated with Oracle on-premise and SaaS services. The services offered are Content and Experience Cloud, WebCenter Portal Cloud, and DIVA Cloud. In 2016, Oracle acquired Dyn, an internet infrastructure company. On May 16, 2018 Oracle announced that it had acquired DataScience.com, a privately held cloud workspace platform for data science projects and workloads. In April 2020, Oracle became the cloud infrastructure provider for Zoom, an online and video meeting platform. The same month, Nissan announced its migration to Oracle Cloud for its high-performance computing (HPC) workloads used for simulating the structural impacts of a car design. Xerox announced a partnership with Oracle Cloud in 2021, where Xerox will use Oracle's cloud-computing capabilities within its business incubator. === Software as a Service (SaaS) === Oracle provides SaaS applications also known as Oracle Cloud Applications. These applications are offered across a variety of products, industrial sectors with various deployment options to adhere to compliance standards. The below list mentions Oracle Cloud Applications provided by Oracle Corporation. Customer Experience (CX) Human Capital Management (HCM) Enterprise Resource Planning (ERP) Supply Chain Management (SCM) Enterprise Performance Management (EPM) Internet of Things Applications (IoT) SaaS Analytics Data Industry Solutions (Communications, Financial Services, Consumer Goods, High Tech and Manufacturing, Higher Education, Hospitality, Utilities) Deployment (adhering to standards for sectors such as Financial Services, Retail Services, Public Sector, Defense) Block-Chain Cloud Service (in partnership with SAP, IBM and Microsoft) Blockchain Applications On July 28, 2016 Oracle bought NetSuite, the very first cloud company, for $9.3 billion. === Data as a Service (DaaS) === This platform is known as the Oracle Data Cloud. This platform aggregates and analyzes consumer data powered by Oracle ID Graph across channels and devices to create cross-channel consumer understanding. == Deployment models == Oracle Cloud is available in 44 regions as of July 2023, including North America, South America, UK, European Union, Middle East, Africa, India, Australia, Korea, and Japan. Oracle Cloud is available as a public cloud (Oracle-managed regions); to selected government agencies as an Oracle-managed government cloud in the United States (with FedRAMP High and DISA SRG IL5 compliance) and United Kingdom; and as a "private cloud" or "hybrid cloud" as an Oracle-managed database-only service or full-service dedicated region - what Oracle calls "Cloud at Customer". == Architecture == Oracle's public and government cloud is offered through a global network of Oracle-managed data centers, connected by an Oracle-managed backbone network. Oracle's Exadata Cloud at Customer leverages this network for contr
Read more →
Teechart

TeeChart is a charting library for programmers, developed and managed by Steema Software of Girona, Catalonia, Spain. It is available as commercial and non-commercial software. TeeChart has been included in most Delphi and C++Builder products since 1997, and TeeChart Standard currently is part of Embarcadero RAD Studio 13 Florence. TeeChart Pro version is a commercial product that offers shareware releases for all of its formats. The TeeChart Charting Library offers charts, maps and gauges in versions for Delphi VCL/FMX, ActiveX, C# for Microsoft Visual Studio .NET. Full source code has always been available for all versions except the ActiveX version. TeeChart's user interface is translated into 38 languages. == History == The first version of TeeChart was authored in 1995 by David Berneda, co-founder of Steema, using the Borland Delphi Visual Component Library programming environment and TeeChart was first released as a shareware version and made available via Compuserve in the same year. It was written in the first version of Delphi VCL, as a 16-bit Charting Library named TeeChart version 1. The next version of TeeChart was released as a 32-bit library (Delphi 2 supported 32-bit compilation) but was badged as TeeChart VCL v3 to coincide with Borland's naming convention for inclusion on the toolbox palette of Borland Delphi v3 in 1997 and with C++ Builder v3 in 1998. It has been on the Delphi/C++ Builder toolbox palette ever since. The current version is Embarcadero RAD Studio 13 Florence. TeeChart's first ActiveX version named "version 3" too, to match the VCL version's nomenclature, was released in 1998. The version was optimised to work with Microsoft's Visual Studio v97 and v6.0 developer suites that include Visual Basic and Microsoft Visual C++ programming languages. Support for new programming environments followed with TeeChart's first native C# version for Microsoft Visual Studio .NET released in 2002 and TeeChart.Lite for .NET, a free charting component, released for Visual Studio.NET in 2003 and supporting too, Mono (programming). Steema Software released the first native TeeChart Java (programming language) version in 2006 and TeeChart's first native PHP version was released in 2009 and published as open-source in June 2010. Mobile versions of TeeChart, for Android (operating system) devices and Windows Phone 7 devices were released during the first half of 2011. In 2012 TeeChart extended functionality to iPhone/iPad and BlackBerry OS devices and a new JavaScript version was released in the same year to support HTML5 Canvas. In 2013 Steema launched TeeChart for .NET Chart for Windows Store applications and included support for Microsoft's Windows Phone 8 mobile platform. TeeChart for Xamarin.Forms written with 100% C# code and cross-platform support for .NET desktops, Windows Phone, iOS and Android was released in 2014. Also since 2014 Webforms charts now offers HTML5 interactivity. Steema launched TeeChart for Avalonia (software framework) in 2022 and in 2023 .NET_MAUI support was added to the TeeChart for .NET. == Usage == TeeChart is a general purpose charting component designed for use in differing ambits, offering a wide range of aesthetics to chart data. Generally TeeCharts published in the field, in areas where large amounts of data must be interpreted regularly, remain by designer choice in their simplest form to maximize the "data-ink ratio". Sloan Digital Sky Survey, SDSS Web Services' use for charting "Scientific .. plotting of online data" at The Virtual Observatory Spectrum Services reflects that approach. The SDSS chart authors choose to represent data using TeeChart's standard 2D line display. Speed is also a factor when choosing how to most effectively plot data. Realtime data, at frequencies of up to tens or hundreds of data points or more per second, require the most processor economic approach to charting. Computer processing time dedicated to the plotting of data needs to be as lightweight as possible, freeing-up computer tasks "to achieve real-time data acquisition, display and analysis". A critical and stated aspect of many data visualisation applications is the ability to offer interactivity to the user; NASA's document, the Orbital Debris Engineering Model Model ORDEM 3.0 - User's Guide, 2014, states that "The user may manipulate the graphs to zoom, pan, and copy to the clipboard and export to various file types" and Computer and Computing Technologies in Agriculture II, Volume 1, Daoliang, Li; Chunjiang, Zhao (2009), also using TeeChart, states "the properties at any point in the chart can be viewed moving the mouse over it". Writing about control education, Juha Lindfors states "The desired charting functionality (such as zooming and scaling) is achieved..". Charting applications have become increasingly 'onlined', made available either to a wider public or to a territorially remote userbase via networked applications. The World Wide Web (the Web) has become "by far, the most popular Internet protocol" to disseminate online applications. Most major IDEs now offer environments for web application developede aimed at browser hosted applications. Charting components, TeeChart among them, have adapted to provide models that work within a browser environment, often using static images and scripted layering techniques such as Ajax (programming) to offer a level of interactivity, improve response times and hide apparent delay from the user. Options to enrich client, browser-side processing flexibility are exploited by TeeChart libraries via modules that offer 'micro-environments' within the browser, such as the long established ActiveX technology, Adobe Flash, Microsoft Silverlight or Java Applets. Serverside environments offer too, a means to interact with browser based script to dynamically respond to charting requests. Joomla and CodeIgniter are host environments for TeeChart PHP and an example of an Embarcadero IntraWeb VCL designed application using TeeChart, is documented here. == Programmer reference == The Code Project includes a demo that uses TeeChart.Lite, called 'Self-Organizing Feature Maps (Kohonen maps)' written by Bashir Magomedovl and SourceForge includes a Database Stress and Monitor that also uses TeeChart.Lite. Books and information sources that include substantial sections about working with the Delphi version of TeeChart include "Mastering Delphi 6" by Marco Cantù, "C++ Builder 5 developer's guide", a video Delphi Tutorial on charting JPEG compression and support forums and reference pages at TeeChart Support Forums. Non-English language document sources include, in Czech "Myslíme v jazyku Delphi 7: knihovna zkušeného programátora" by Marco Cantù, and Chinese, Delphi 6, Delphi, and Delphi 5.
Read more →
Tom's Planner

Tom's Planner is a web-based tool and application service provider for project planning, management and collaboration. == History == Tom's Planner is based on Curaçao. In November 2009, it announced its public beta launch on TechCrunch and moved out of beta in August 2010. In 2013 Tom's Planner acquired its competitor Gantto. == Software == Tom's Planner is project management software that enables the creation of project schedules (Gantt charts) using a visual perspective. Tom's Planner uses the Freemium Business Model. Users can register for a free account or choose a paid version. Tom's Planner is available in five languages and is used by thousands of users on a daily basis in more than 100 countries worldwide. Customers range from fortune 500 companies to small mom-and-pop shops. == Reviews == Tom's Planner has been reviewed by PC World, TechCrunch, Lifehacker, and several other periodicals.
Read more →
Perusall

Perusall is a social web annotation tool intended for use by students at schools and universities. It allows users to annotate the margins of a text in a virtual group setting that is similar to social media—with upvoting, emojis, chat functionality, and notification. It also includes automatic AI grading. == History == Perusall began as a research project at Harvard University. It later became an educational product for students and teachers. As of 2024, Perusall states more than 5 million students have used the tool at over 5,000 educational institutions in 112 countries." == Functionality == Perusall integrates with learning management systems such as Moodle, Canvas and Blackboard to aid with collaborative annotation. The tool supports annotation of a range of media including text, images, equations, videos, PDFs and snapshots of webpages.
Read more →
Data cube

In computer programming, a data cube (or datacube) is a multi-dimensional array of values. Typically, the term "data cube" is applied in contexts where these arrays are massively larger than the hosting computer's main memory; examples include multi-terabyte/petabyte data warehouses and time series of image data. Even though it is called a cube, a data cube generally is a multi-dimensional concept which can be 1-dimensional, 2-dimensional, 3-dimensional, or higher-dimensional. The data cube is used to represent data (sometimes called facts) along some dimensions of interest. In satellite image timeseries, dimensions would be latitude and longitude coordinates and time; a fact (sometimes called measure) would be a pixel at a given space and time as taken by the satellite. For example, in online analytical processing, an OLAP cube about a company would have dimensions that could be the company subsidiaries, the company products, and time; in this setup, a fact would be a sales event where a particular product has been sold in a particular subsidiary at a particular time. In any case, every dimension divides data into groups of cells whereas each cell in the cube represents a single measure of interest. Sometimes cubes hold only a few values with the rest being empty, i.e. undefined, while sometimes most or all cube coordinates hold a cell value. In the first case such data are called sparse, and in the second case they are called dense, although there is no hard delineation between the two. Data cubes may be stored in database management systems (DBMS) as part of array DBMS. Spatio-temporal databases and geospatial databases may also be represented as coverage data. == History == Multi-dimensional arrays have long been familiar in programming languages. Fortran offers arbitrarily-indexed 1-D arrays and arrays of arrays, which allows the construction of higher-dimensional arrays, up to 15 dimensions. APL supports n-D arrays with a rich set of operations. All these have in common that arrays must fit into the main memory and are available only while the particular program maintaining them (such as image processing software) is running. A series of data exchange formats support storage and transmission of data cube-like data, often tailored towards particular application domains. Examples include MDX for statistical (in particular, business) data, Zarr and Hierarchical Data Format for general scientific data, and TIFF for imagery. In 1992, Peter Baumann introduced management of massive data cubes with high-level user functionality combined with an efficient software architecture. Datacube operations include subset extraction, processing, fusion, and in general queries in the spirit of data manipulation languages like SQL. Some years after, the data cube concept was applied to describe time-varying business data as data cubes by Jim Gray, et al., and by Venky Harinarayan, Anand Rajaraman and Jeff Ullman. Around that time, a working group on Multi-Dimensional Databases ("Arbeitskreis Multi-Dimensionale Datenbanken") was established at German Gesellschaft für Informatik. Datacube Inc. was an image processing company selling hardware and software applications for the PC market in 1996, however without addressing data cubes as such. The EarthServer initiative has established geo data cube service requirements. == Standardization == In 2018, the ISO SQL database language was extended with data cube functionality as "SQL – Part 15: Multi-dimensional arrays (SQL/MDA)". Web Coverage Processing Service is a geo data cube analytics language issued by the Open Geospatial Consortium in 2008. In addition to the common data cube operations, the language knows about the semantics of space and time and supports both regular and irregular grid data cubes, based on the concept of coverage data. An industry standard for querying business data cubes, originally developed by Microsoft, is MultiDimensional eXpressions. == Implementation == Many high-level computer languages treat data cubes and other large arrays as single entities distinct from their contents. These languages, of which Fortran, APL, IDL, NumPy, PDL, and S-Lang are examples, allow the programmer to manipulate complete film clips and other data en masse with simple expressions derived from linear algebra and vector mathematics. Some languages (such as PDL) distinguish between a list of images and a data cube, while many (such as IDL) do not. Array DBMSs (Database Management Systems) offer a data model which generically supports definition, management, retrieval, and manipulation of n-dimensional data cubes. This database category has been pioneered by the rasdaman system since 1994. == Applications == Multi-dimensional arrays can meaningfully represent spatio-temporal sensor, image, and simulation data, but also statistics data where the semantics of dimensions is not necessarily of spatial or temporal nature. Generally, any kind of axis can be combined with any other into a data cube. === Mathematics === In mathematics, a one-dimensional array corresponds to a vector, a two-dimensional array resembles a matrix; more generally, a tensor may be represented as an n-dimensional data cube. === Science and engineering === For a time sequence of color images, the array is generally four-dimensional, with the dimensions representing image X and Y coordinates, time, and RGB (or other color space) color plane. For example, the EarthServer initiative unites data centers from different continents offering 3-D x/y/t satellite image timeseries and 4-D x/y/z/t weather data for retrieval and server-side processing through the Open Geospatial Consortium WCPS geo data cube query language standard. A data cube is also used in the field of imaging spectroscopy, since a spectrally-resolved image is represented as a three-dimensional volume. Earth observation data cubes combine satellite imagery such as Landsat 8 and Sentinel-2 with Geographic information system analytics. === Business intelligence === In online analytical processing (OLAP), data cubes are a common arrangement of business data suitable for analysis from different perspectives through operations like slicing, dicing, pivoting, and aggregation.
Read more →
Army Chief Information Officer/G-6

In September 2020, the Army realigned the previously consolidated CIO/G-6 function into two separate roles, Office of the Chief Information Officer and Deputy Chief of Staff, G-6, that report to the secretary of the Army and chief of staff of the Army, respectively. The realignment came after several months of planning and coordination. Lt. Gen. John Morrison was nominated to the Senate for promotion and assignment as the G-6 and confirmed, assuming that position in August 2020. Subsequently, the Secretary of the Army, Ryan McCarthy appointed Dr. Raj G. Iyer as the first civilian Chief Information Officer, a career Senior Executive Service position in November 2020. == G-6 == Advise chief of staff of the Army and the Chief Information Officer on planning, fielding, and execution of C4IT worldwide Army operations Develop and execute the plan for the Unified Network Implement Army information assurance Supervise C4IT, Signal support, Information security, Force structure and equipping activities in support of warfighting operations Oversee management of the Signal forces == Planned realignment == On June 11, 2020, the Army announced that the two roles of CIO and Deputy Chief of Staff, G-6 (DCS, G-6) would be realigned no later than August 31, 2020, with separate individuals responsible for each position. With the realignment: CIO core functions will be policy, governance, and oversight. Focus areas include: Information Environment, Cybersecurity, Enterprise Architecture, and Data Policy/Oversight/Governance, Enterprise Architecture, Enterprise Cloud Management and IT Spend/Category Management. DCS, G-6 core functions will be planning, strategy, and implementation. Focus areas include: Information Environment/Network, Planning and Integration, Theater Synchronization, Architecture Integration, Enterprise Information Environment (EIE) Mission Area Portfolio Management and Mission Decision Packet Management. In order to support multi-domain operations, the Army will have to connect Enterprise networks and tactical networks. —LTG Morrison, DCS, G-6 DCS G-6 released the Army Unified Network Plan under the Army Digital Transformation Strategy, to help the Army to establish a Multi-Domain Operations capable force by 2028. The Unified Network will enable Army formations, as part of the Joint Force, to operate in highly contested and congested operational environments with the speed and global range to achieve decision dominance and maintain overmatch. The plan shapes, synchronizes, integrates and governs Unified Network efforts and aligns the personnel, organizational structure and capabilities required to enable MDO at all echelons. == Chief signal officers and their successors == Chief signal officers (1860–1964) Maj. Albert J. Myer 1860–1863 Lt. Col. William J. L. Nicodemus 1863–1864 Col. Benjamin F. Fisher 1864–1866 Col. Albert J. Myer 1866–1880 (promoted to brigadier general 16 June 1880) Brig. Gen. William B. Hazen 1880–1887 Brig. Gen. Adolphus W. Greely 1887–1906 Brig. Gen. James Allen 1906–1913 Brig. Gen. George P. Scriven 1913–1917 Brig. Gen. George O. Squier 1917–1923 (promoted to major general 6 October 1917) Maj. Gen. Charles McK. Saltzman 1924–1928 Maj. Gen. George Sabin Gibbs 1928–1931 Maj. Gen. Irving J. Carr 1931–1934 Maj. Gen. James B. Allison 1935–1937 Maj. Gen. Joseph O. Mauborgne 1937–1941 Maj. Gen. Dawson Olmstead 1941–1943 Maj. Gen. Harry C. Ingles 1943–1947 Maj. Gen. Spencer B. Akin 1947–1951 Maj. Gen. George I. Back 1951–1955 Lt. Gen. James D. O’Connell 1955–1959 Maj. Gen. Ralph T. Nelson 1959–1962 Maj. Gen. Earle F. Cook 1962–1963 Maj. Gen. David Parker Gibbs 1963–1964 Chiefs of communications-electronics (1964–1967) Maj. Gen. David Parker Gibbs 1964–1966 Maj. Gen. Walter E. Lotz, Jr. 1966–1967 Assistant chiefs of staff for communications-electronics (1967–1974) Maj. Gen. Walter E. Lotz, Jr. 1967–1968 Maj. Gen. George E. Pickett 1968–1972 Lt. Gen. Thomas Rienzi 1972–1974 Directors of telecommunications and command and control (1974–1978) (a directorate of ODCSOPS) Lt. Gen. Thomas Rienzi 1974–1977 Lt. Gen. Charles R. Myer 1977–1978 Assistant chiefs of staff for automation and communications (1978–1981) Lt. Gen. Charles R. Myer 1978–1979 Maj. Gen. Clay T. Buckingham 1979–1981 Assistant deputy chiefs of staff for operations and plans (command, control, communications, and computers) (1981–1984) Maj. Gen. Clay T. Buckingham 1981–1982 Maj. Gen. James M. Rockwell 1982–1984 Assistant chiefs of staff for information management (1984–1987) Lt. Gen. David K. Doyle 1984–1986 Lt. Gen. Thurman D. Rodgers 1986–1987 Directors of information systems for command, control, communications, and computers Lt. Gen. Thurman D. Rodgers 1987–1988 Lt. Gen. Bruce R. Harris 1988–1990 Lt. Gen. Jerome B. Hilmes 1990–1992 Lt. Gen. Peter A. Kind 1992–1994 Lt. Gen. Otto J. Guenther 1995–1997 Lt. Gen. William H. Campbell Chief Information Officer, Military Deputy to the Army Acquisition Executive, and Director of Information Systems for Command, Control, Communications and Computers Lt. Gen. William H. Campbell 1997–2000
Read more →