AI For Business From University Of Pennsylvania

AI For Business From University Of Pennsylvania — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Event condition action

Event condition action (ECA) is a short-cut for referring to the structure of active rules in event-driven architecture and active database systems. Such a rule traditionally consisted of three parts: The event part specifies the signal that triggers the invocation of the rule The condition part is a logical test that, if satisfied or evaluates to true, causes the action to be carried out The action part consists of updates or invocations on the local data This structure was used by the early research in active databases which started to use the term ECA. Current state of the art ECA rule engines use many variations on rule structure. Also other features not considered by the early research is introduced, such as strategies for event selection into the event part. In a memory-based rule engine, the condition could be some tests on local data and actions could be updates to object attributes. In a database system, the condition could simply be a query to the database, with the result set (if not null) being passed to the action part for changes to the database. In either case, actions could also be calls to external programs or remote procedures. Note that for database usage, updates to the database are regarded as internal events. As a consequence, the execution of the action part of an active rule can match the event part of the same or another active rule, thus triggering it. The equivalent in a memory-based rule engine would be to invoke an external method that caused an external event to trigger another ECA rule. ECA rules can also be used in rule engines that use variants of the Rete algorithm for rule processing. == ECA rule engines == Rulecore Concurrent Rules Apart Database Detect Invocation Rules ConceptBase ECArules
Read more →
Behavior-based robotics

Behavior-based robotics (BBR) or behavioral robotics is an approach in robotics that focuses on robots that are able to exhibit complex-appearing behaviors despite little internal variable state to model its immediate environment, mostly gradually correcting its actions via sensory-motor links. == Principles == Behavior-based robotics sets itself apart from traditional artificial intelligence by using biological systems as a model. Classic artificial intelligence typically uses a set of steps to solve problems, it follows a path based on internal representations of events compared to the behavior-based approach. Rather than use preset calculations to tackle a situation, behavior-based robotics relies on adaptability. This advancement has allowed behavior-based robotics to become commonplace in researching and data gathering. Most behavior-based systems are also reactive, which means they need no programming of what a chair looks like, or what kind of surface the robot is moving on. Instead, all the information is gleaned from the input of the robot's sensors. The robot uses that information to gradually correct its actions according to the changes in immediate environment. Behavior-based robots (BBR) usually show more biological-appearing actions than their computing-intensive counterparts, which are very deliberate in their actions. A BBR often makes mistakes, repeats actions, and appears confused, but can also show the anthropomorphic quality of tenacity. Comparisons between BBRs and insects are frequent because of these actions. BBRs are sometimes considered examples of weak artificial intelligence, although some have claimed they are models of all intelligence. == Features == Most behavior-based robots are programmed with a basic set of features to start them off. They are given a behavioral repertoire to work with dictating what behaviors to use and when, obstacle avoidance and battery charging can provide a foundation to help the robots learn and succeed. Rather than build world models, behavior-based robots simply react to their environment and problems within that environment. They draw upon internal knowledge learned from their past experiences combined with their basic behaviors to resolve problems. == History == The school of behavior-based robots owes much to work undertaken in the 1980s at the Massachusetts Institute of Technology by Rodney Brooks, who with students and colleagues built a series of wheeled and legged robots utilizing the subsumption architecture. Brooks' papers, often written with lighthearted titles such as "Planning is just a way of avoiding figuring out what to do next", the anthropomorphic qualities of his robots, and the relatively low cost of developing such robots, popularized the behavior-based approach. Brooks' work builds—whether by accident or not—on two prior milestones in the behavior-based approach. In the 1950s, W. Grey Walter, an English scientist with a background in neurological research, built a pair of vacuum tube-based robots that were exhibited at the 1951 Festival of Britain, and which have simple but effective behavior-based control systems. The second milestone is Valentino Braitenberg's 1984 book, "Vehicles – Experiments in Synthetic Psychology" (MIT Press). He describes a series of thought experiments demonstrating how simply wired sensor/motor connections can result in some complex-appearing behaviors such as fear and love. Later work in BBR is from the BEAM robotics community, which has built upon the work of Mark Tilden. Tilden was inspired by the reduction in the computational power needed for walking mechanisms from Brooks' experiments (which used one microcontroller for each leg), and further reduced the computational requirements to that of logic chips, transistor-based electronics, and analog circuit design. A different direction of development includes extensions of behavior-based robotics to multi-robot teams. The focus in this work is on developing simple generic mechanisms that result in coordinated group behavior, either implicitly or explicitly.
Read more →
Clip Studio Paint

Clip Studio Paint (previously marketed as Manga Studio in North America), informally known in Japan as Kurisuta (クリスタ), is a family of software applications developed by Japanese graphics software company Celsys. It is used for the digital creation of comics, general illustration, and 2D animation. The software is available in versions for macOS, Windows, iOS, iPadOS, Android, and ChromeOS. The program is widely used by amateur and professional comics creators, and animation studios. The application is sold in editions with varying feature sets. The full-featured edition is a page-based, layered drawing program, with support for bitmap and vector art, text, imported 3D models, and frame-by-frame animation. It is designed for use with a stylus and a graphics tablet or tablet computer. It has drawing tools which emulate natural media such as pencils, ink pens, and brushes, as well as patterns and decorations. It is distinguished from similar programs by features designed for creating comics: tools for creating panel layouts, perspective rulers, sketching, inking, applying tones and textures, coloring, and creating word balloons and captions. == History == The application has it origins in a program for macOS and Windows, released in Japan in 2001 as "Comic Studio". It was sold as "Manga Studio" in the Western market by E Frontier America until 2007, then by Smith Micro Software. Early versions were designed for creating black and white art with only spot color (a typical format for Japanese manga), with version 4 adding support for full-color art. Celsys developed Clip Studio Paint as a replacement for this product, based on the company's Illust Studio application, and it was released on May 31, 2012. It was initially distributed in Western markets as "Manga Studio 5", but in 2016, the branding was unified worldwide as "Clip Studio Paint". At this time, version 1.5.4 introduced a new file format (extension .clip) and frame-by-frame animation. In late 2017, Celsys took over direct support for the software worldwide, and ceased its relationship with Smith Micro. In July 2018, Celsys began a partnership with Graphixly for distribution in North America, South America, and Europe. Clip Studio Paint for the Apple iPad was introduced in November 2017, and for the iPhone in December 2019. Clip Studio Paint for Samsung Galaxy tablets and smartphones was released in August 2020 on the Galaxy Store, with versions for other Android devices and Chromebooks released in December. The Windows and macOS versions of the software have been sold and distributed either from the developer's web site or on DVD, and purchased either with a perpetual license or an ongoing subscription. The versions for iPhone, iPad, and Android-based devices are distributed through the corresponding app stores free of charge, but require a subscription – which includes cloud storage – for unrestricted use. Without a subscription, the tablet versions can be used only for a specified number of months, and the phone versions can be used only for 30 hours per month. From 2013 to 2023, regular updates for version 1 were distributed free of additional charge to both perpetual and subscription users. Since the release of version 2 in 2023, feature updates are included only in subscription plans and are available to perpetual licenses at an additional cost. Perpetual licenses can be upgraded permanently or with an annual "update pass". The "update pass" provides early access to features to be included in subsequent perpetual licenses for 12 months, after which the software reverts to the original license if not renewed. In March 2024, version 3 was released, and version 4 introduced additional features in March 2025. == Editions == Clip Studio Paint is available in three editions, with differing feature sets and prices: Debut (bundle-only grade), Pro (adding support for vector-based drawing, custom textures, and comics-focused features), and EX (adding support for multi-page documents, book exporting, and 2D animation). Companion programs include Clip Studio (for managing and sharing digital assets distributed through the Clip Studio web site, managing licenses, and getting updates and support) and Clip Studio Modeler (for setting up 3D materials to use in Clip Studio Paint).
Read more →
PhotoWorks (ray tracing software)

PhotoWorks is a raytrace rendering program created by Dassault Systèmes SolidWorks Corporation, formerly supplied as a photorealistic rendering add-in for SolidWorks. The program is based on the Mental Ray rendering engine. It has a library of scenes and materials that can be used with user-created SolidWorks files to create still frame images within the SolidWorks GUI. Since the 2011 release of SolidWorks, PhotoWorks has been replaced by the PhotoView 360 rendering utility. A 2010 review comparing PhotoWorks with three other rendering programs for SolidWorks (including PhotoView 360) gave the program high marks for render speed and built-in materials, but low marks for realism and user interface. Appearance File Type: .p2m
Read more →
Retained mode

Retained mode in computer graphics is a major pattern of API design in graphics libraries, in which the graphics library, instead of the client, retains the scene (complete object model of the rendering primitives) to be rendered and the client calls into the graphics library do not directly cause actual rendering, but make use of extensive indirection to resources, managed – thus retained – by the graphics library. It does not preclude the use of double-buffering. Immediate mode is an alternative approach. Historically, retained mode has been the dominant style in GUI libraries; however, both can coexist in the same library and are not necessarily exclusionary in practice. == Overview == In retained mode the client calls do not directly cause actual rendering, but instead update an abstract internal model (typically a list of objects) which is maintained within the library's data space. This allows the library to optimize when actual rendering takes place along with the processing of related objects. Some techniques to optimize rendering include: managing double buffering treatment of hidden surfaces by backface culling/occlusion culling (Z-buffering) only transferring data that has changed from one frame to the next from the application to the library Example of coexistence with immediate mode in the same library is OpenGL. OpenGL has immediate mode functions that can use previously defined server side objects (textures, vertex buffers and index buffers, shaders, etc.) without resending unchanged data. Examples of retained mode rendering systems include Windows Presentation Foundation, SceneKit on macOS, and PHIGS.
Read more →
Mathematical morphology

Mathematical morphology (MM) is a theory and technique for analyzing and processing geometrical structures. It's based on set theory, lattice theory, topology, and random functions. MM is most commonly applied to digital images, but it can be employed as well on graphs, surface meshes, solids, and many other spatial structures. Topological and geometrical continuous-space concepts such as size, shape, convexity, connectivity, and geodesic distance, were introduced by MM on both continuous and discrete spaces. MM is also the foundation of morphological image processing, which consists of a set of operators that transform images according to the above characterizations. The basic morphological operators are erosion, dilation, opening and closing. MM was originally developed for binary images, and was later extended to grayscale functions and images. The subsequent generalization to complete lattices is widely accepted today as MM's theoretical foundation. == History == Mathematical Morphology was developed in 1964 by the collaborative work of Georges Matheron and Jean Serra, at the École des Mines de Paris, France. Matheron supervised the PhD thesis of Serra, devoted to the quantification of mineral characteristics from thin cross sections, and this work resulted in a novel practical approach, as well as theoretical advancements in integral geometry and topology. In 1968, the Centre de Morphologie Mathématique was founded by the École des Mines de Paris in Fontainebleau, France, led by Matheron and Serra. During the rest of the 1960s and most of the 1970s, MM dealt essentially with binary images, treated as sets, and generated a large number of binary operators and techniques: Hit-or-miss transform, dilation, erosion, opening, closing, granulometry, thinning, skeletonization, ultimate erosion, conditional bisector, and others. A random approach was also developed, based on novel image models. Most of the work in that period was developed in Fontainebleau. From the mid-1970s to mid-1980s, MM was generalized to grayscale functions and images as well. Besides extending the main concepts (such as dilation, erosion, etc.) to functions, this generalization yielded new operators, such as morphological gradients, top-hat transform and the Watershed (MM's main segmentation approach). In the 1980s and 1990s, MM gained a wider recognition, as research centers in several countries began to adopt and investigate the method. MM started to be applied to a large number of imaging problems and applications, especially in the field of non-linear filtering of noisy images. In 1986, Serra further generalized MM, this time to a theoretical framework based on complete lattices. This generalization brought flexibility to the theory, enabling its application to a much larger number of structures, including color images, video, graphs, meshes, etc. At the same time, Matheron and Serra also formulated a theory for morphological filtering, based on the new lattice framework. The 1990s and 2000s also saw further theoretical advancements, including the concepts of connections and levelings. In 1993, the first International Symposium on Mathematical Morphology (ISMM) took place in Barcelona, Spain. Since then, ISMMs are organized every 2–3 years: Fontainebleau, France (1994); Atlanta, USA (1996); Amsterdam, Netherlands (1998); Palo Alto, CA, USA (2000); Sydney, Australia (2002); Paris, France (2005); Rio de Janeiro, Brazil (2007); Groningen, Netherlands (2009); Intra (Verbania), Italy (2011); Uppsala, Sweden (2013); Reykjavík, Iceland (2015); Fontainebleau, France (2017); and Saarbrücken, Germany (2019). =
Read more →
Vegas Pro

Vegas Pro (formerly known as Sony Vegas) is a professional video editing software package for non-linear editing (NLE), designed to run on the Microsoft Windows operating system. The first release of Vegas Beta was on June 11, 1999. Vegas was originally developed as a non-linear audio editing application. Version 2.0 would split the program into audio and video editing variants, with the former being dropped by version 4.0, making the video offering the only variant available to consumers. Vegas Pro features real-time multi-track video and audio editing on unlimited tracks, resolution-independent video sequencing, complex effects, compositing tools, 24-bit/192 kHz audio support, VST and DirectX plug-in effect support, and Dolby Digital surround sound mixing. The software was originally published by Sonic Foundry until May 2003, when Sony purchased Sonic Foundry and formed Sony Creative Software. On May 24, 2016, Sony announced that Vegas was sold to MAGIX, which formed VEGAS Creative Software, to continue support and development of the software. As of the end of March 2026, it was publicly announced that Boris FX had taken ownership of Vegas Pro. Each release of Vegas is sold standalone; however, upgrade discounts are sometimes provided. == Features == Vegas does not require any specialized hardware to run properly, allowing it to operate on any Windows computer that meets the system requirements. == History == Vegas 1.0 was released after a brief public beta by Sonic Foundry on July 23, 1999 at the NAMM Show in Nashville, Tennessee as an audio-only tool with a particular focus on re-scaling and resampling audio. It supported formats like DivX and Real Networks RealSystem G2 file formats. Martin Walker from Sound on Sound described working in Vegas 1.0 as a "very pleasurable experience, especially since so many functions are highly intuitive" though also criticizing some features as hard to figure out due to the lack of a central help file. Later, on June 12, 2000, Vegas Video and Audio 2.0 (also referred to as just Vegas 2.0) was released, with its beta releasing earlier that year on April 10. This was the first version of Vegas to include video-editing tools and was also the first to have a low-cost "LE" version alongside the regular release. The LE releases would continue through version 3.0 of Vegas but would be discontinued by the release of Vegas 4.0. Vegas 3.0 was released the next year on December 3, and added new video effects, features for ease-of-use with DV, and support for editing Windows Media files. Vegas 4.0 was released on 6 February 2003 and added application scripting, advanced color correction, 5.1 surround sound mixing, and Steinberg ASIO support. This was the last release under the Sonic Foundry name after it sold much of its software suite, including Sound Forge and Acid Pro, to Sony Pictures Digital for $18 million later in 2003. Under Sony's ownership, Vegas 5.0 was released on April 19, 2004, bringing 3D track motion, compositing, reversing, envelope automation, etc. 7.0 also added an improved video preview, enhanced layout management, improved snapping, and more customization. With the release of 8.0, Sony opted to go back to the original "Vegas Pro" branding that the first version released with. It added the ability to burn Blu-ray and DVD optical media, support for 32-bit floating point audio, support for tempo-based audio effects, and more. It also moved the timeline to the bottom of the window by default with the option of moving it back to the top if the user wished to. Sony was also experimenting with 64-bit at this time and ported Vegas Pro 8.0 to 64-bit systems under the name "Vegas Pro 8.1". Vegas Pro 9.0 added support for 4K resolution and pro camcorder formats like Red and XDCAM EX. In 2009, Sony Creative Software purchased the Velvetmatter Radiance suite of video FX plug-ins which were included in Sony Vegas Pro 9.0. As a result, they were no longer available as a separate product from Velvetmatter. Vegas Pro 10 was released in 2010 with stereoscopic 3D editing, image stabilization, OpenFX plugin support, real-time audio event effects, and a few UI changes. This was the last release to include support for Windows XP. Vegas Pro 11 was released the next year on 17 October, with GPGPU video acceleration, enhanced text tools, enhanced stereoscopic/3D features, RAW photo support, and new event synchronization mechanisms. In addition, Vegas Pro 11 comes pre-loaded with "NewBlue" Titler Pro, a 2D and 3D titling plug-in. Vegas Pro 12 would add two new configurations: Vegas Pro 12 Edit, for "Professional Video and Audio Production"; and Vegas Pro 12 Suite, for "Professional Editing, Disc Authoring, and Visual Effects Design". Vegas Pro 13 would be the last version released with Sony branding after the acquisition of much of Sony Creative Software's library by Magix. After they acquired Vegas, Magix released version 14 on September 20, 2016. It featured advanced 4K upscaling as well as many bug fixes, a higher video velocity limit, RED camera support, and a variety of other features. This was also the last version to have the light theme enabled by default. Released on August 28, 2017, Vegas Pro 15 features major UI changes that claim to bring usability improvements and customization. It was the first version of VEGAS Pro to have a dark theme; it also allows more efficient editing speeds, including adding new shortcuts to speed the video editing process. Vegas Pro 15 includes support for Intel Quick Sync Video (QSV) and other technologies, as well as various other features. It introduced a new VEGAS Pro icon as a V. Vegas Pro 16 has some new features including file backup, motion tracking, improved video stabilization, 360° editing and HDR support. Magix has continued to improve Vegas through version 21 with support for reading Matroska files, a more detailed render dialogue, live streaming, VST3 support, a VST 32-bit bridge, and a selective Paste Event Attributes menu. Magix would later release a subscription model for using Vegas named "Vegas Pro 365" on January 17, 2018, although the perpetual licence is still an option for customers. This version includes cloud-based speech synthesis among other features not included in the mainline Vegas release. == Version history == Each release of Vegas is sold standalone, however upgrade discounts are sometimes provided. === Vegas Beta === Sonic Foundry introduced a sneak preview version of Vegas Pro on June 11, 1999. It is called a "Multitrack Media Editing System". === Vegas 1.0 === Released on July 23, 1999 at the NAMM Show in Nashville, Tennessee, Vegas was an audio-only tool with a particular focus on rescaling and resampling audio. It supported formats like DivX and Real Networks RealSystem G2 file formats. Version 1.0 is the final Vegas release to include Windows 95 support. === Vegas Video beta (Vegas 2.0 beta) === Released on April 10, 2000, this was the first version of Vegas to include video-editing tools. === Vegas Video (Vegas 2.0) === Released on June 12, 2000. Version 2.0 is the final Vegas Video release to include Windows NT 4.0 support. === Vegas Video 3.0 === Released on December 3, 2001. This release added: New Video Effects – Lens Flare, Light Rays, Film FX, Color Curves, Mirror, Remap, Deform, Convolution, Linear Blur, Black Restore, Levels, Unsharp Mask, Color Grading, and Timecode Burn filter. Batch Capture with Automatic Scene Detection – Captures DV with automatic scene detection, batch capture, tape logging, still image capture and thumbnail previews. Red Book Audio CD Mastering with CD Architect (TM) Technology – Used for burning Red Book audio CD masters directly from the Vegas timeline with ISRC, UPC, and PQ list support. New Sonic Foundry DV Codec – Introduces a DV codec developed by Sonic Foundry that offers artifact-free compositing and DV chromakeying. DV Print-to-Tape from the Timeline – Prints projects to DV cameras and decks from the Vegas timeline. Windows Media (TM) File Editing – Creates and edits Windows Media (TM) files. New MPEG Encoding Tools – Used for producing MPEG-2 files for DVD productions. Dynamic RAM Previewing – Temporary RAM/render-free previews for analysis and tweaking of complex video FX without rendering. VideoCD and Data CD Burning – Burning projects directly to VideoCD for playback on most DVD players or data CDs for playback computers' CD-ROMs. === Vegas 4.0 === Released on February 6, 2003. This release added: Advanced Color Correction Tools Searchable Media Pool Bins Vectorscope, Histogram, Parade and Waveform Monitoring Application Scripting Improved Ripple Editing Motion Blur and Super-Sampling Envelopes 5.1 Surround Mixing Dolby® Digital AC-3 Encoding certified and tested by Dolby Laboratories DirectX® Audio Plug-In Effects Automation ASIO Driver Support Windows Media™ 9 Support, including Surround Encoding DVD Authoring with AC-3 File Import Capabilities Integration with DVD Architect via Chap
Read more →
Multisample anti-aliasing

Multisample anti-aliasing (MSAA) is a type of spatial anti-aliasing, a technique used in computer graphics to remove jaggies. It is an optimization of supersampling, where only the necessary parts are sampled more. Jaggies are only noticed in a small area, so the area is quickly found, and only that is anti-aliased. == Definition == The term generally refers to a special case of supersampling. Initial implementations of full-scene anti-aliasing (FSAA) worked conceptually by simply rendering a scene at a higher resolution, and then downsampling to a lower-resolution output. Most modern GPUs are capable of this form of anti-aliasing, but it greatly taxes resources such as texture, bandwidth, and fillrate. (If a program is highly TCL-bound or CPU-bound, supersampling can be used without much performance hit.) According to the OpenGL GL_ARB_multisample specification, "multisampling" refers to a specific optimization of supersampling. The specification dictates that the renderer evaluate the fragment program once per pixel, and only "truly" supersample the depth and stencil values. (This is not the same as supersampling but, by the OpenGL 1.5 specification, the definition had been updated to include fully supersampling implementations as well.) In graphics literature in general, "multisampling" refers to any special case of supersampling where some components of the final image are not fully supersampled. The lists below refer specifically to the ARB_multisample definition. == Description == In supersample anti-aliasing, multiple locations are sampled within every pixel, and each of those samples is fully rendered and combined with the others to produce the pixel that is ultimately displayed. This is computationally expensive, because the entire rendering process must be repeated for each sample location. It is also inefficient, as aliasing is typically only noticed in some parts of the image, such as the edges, whereas supersampling is performed for every single pixel. In multisample anti-aliasing, if any of the multi sample locations in a pixel is covered by the triangle being rendered, a shading computation must be performed for that triangle. However this calculation only needs to be performed once for the whole pixel regardless of how many sample positions are covered; the result of the shading calculation is simply applied to all of the relevant multi sample locations. In the case where only one triangle covers every multi sample location within the pixel, only one shading computation is performed, and these pixels are little more expensive than (and the result is no different from) the non-anti-aliased image. This is true of the middle of triangles, where aliasing is not an issue. (Edge detection can reduce this further by explicitly limiting the MSAA calculation to pixels whose samples involve multiple triangles, or triangles at multiple depths.) In the extreme case where each of the multi sample locations is covered by a different triangle, a different shading computation will be performed for each location and the results then combined to give the final pixel, and the result and computational expense are the same as in the equivalent supersampled image. The shading calculation is not the only operation that must be performed on a given pixel; multisampling implementations may variously sample other operations such as visibility at different sampling levels. == Advantages == The pixel shader usually only needs to be evaluated once per pixel for every triangle covering at least one sample point. The edges of polygons (the most obvious source of aliasing in 3D graphics) are anti-aliased. Since multiple subpixels per pixel are sampled, polygonal details smaller than one pixel that might have been missed without MSAA can be captured and made a part of the final rendered image if enough samples are taken. == Disadvantages == === Alpha testing === Alpha testing is a technique common to older video games used to render translucent objects by rejecting pixels from being written to the framebuffer. If the alpha value of a translucent fragment (pixel) is below a specified threshold, it will be discarded. Because this is performed on a pixel by pixel basis, the image does not receive the benefits of multi-sampling (all of the multisamples in a pixel are discarded based on the alpha test) for these pixels. The resulting image may contain aliasing along the edges of transparent objects or edges within textures, although the image quality will be no worse than it would be without any anti-aliasing. Translucent objects that are modelled using alpha-test textures will also be aliased due to alpha testing. This effect can be minimized by rendering objects with transparent textures multiple times, although this would result in a high performance reduction for scenes containing many transparent objects. === Aliasing === Because multi-sampling calculates interior polygon fragments only once per pixel, aliasing and other artifacts will still be visible inside rendered polygons where fragment shader output contains high frequency components. === Performance === While less performance-intensive than SSAA (supersampling), it is possible in certain scenarios (scenes heavy in complex fragments) for MSAA to be multiple times more intensive for a given frame than post processing anti-aliasing techniques such as FXAA, SMAA and MLAA. Early techniques in this category tend towards a lower performance impact, but suffer from accuracy problems. More recent post-processing based anti-aliasing techniques such as temporal anti-aliasing (TAA), which reduces aliasing by combining data from previously rendered frames, have seen the reversal of this trend, as post-processing AA becomes both more versatile and more expensive than MSAA, which cannot antialias an entire frame alone. == Sampling methods == === Point sampling === In a point-sampled mask, the coverage bit for each multisample is only set if the multisample is located inside the rendered primitive. Samples are never taken from outside a rendered primitive, so images produced using point-sampling will be geometrically correct, but filtering quality may be low because the proportion of bits set in the pixel's coverage mask may not be equal to the proportion of the pixel that is actually covered by the fragment in question. === Area sampling === Filtering quality can be improved by using area sampled masks. In this method, the number of bits set in a coverage mask for a pixel should be proportionate to the actual area coverage of the fragment. This will result in some coverage bits being set for multisamples that are not actually located within the rendered primitive, and can cause aliasing and other artifacts. == Sample patterns == === Regular grid === A regular grid sample pattern, where multisample locations form an evenly spaced grid throughout the pixel, is easy to implement and simplifies attribute evaluation (i.e. setting subpixel masks, sampling color and depth). This method is computationally expensive due to the large number of samples. Edge optimization is poor for screen-aligned edges, but image quality is good when the number of multisamples is large. === Sparse regular grid === A sparse regular grid sample pattern is a subset of samples that are chosen from the regular grid sample pattern. As with the regular grid, attribute evaluation is simplified due to regular spacing. The method is less computationally expensive due to having a fewer samples. Edge optimization is good for screen aligned edges, and image quality is good for a moderate number of multisamples. === Stochastic sample patterns === A stochastic sample pattern is a random distribution of multisamples throughout the pixel. The irregular spacing of samples makes attribute evaluation complicated. The method is cost efficient due to low sample count (compared to regular grid patterns). Edge optimization with this method, although sub-optimal for screen aligned edges. Image quality is excellent for a moderate number of samples. == Quality == Compared to supersampling, multisample anti-aliasing can provide similar quality at higher performance, or better quality for the same performance. Further improved results can be achieved by using rotated grid subpixel masks. The additional bandwidth required by multi-sampling is reasonably low if Z and colour compression are available. Most modern GPUs support 2×, 4×, and 8× MSAA samples. Higher values result in better quality, but are slower.
Read more →
Weak artificial intelligence

Weak artificial intelligence (weak AI) is artificial intelligence that implements a limited part of the mind, or, as narrow AI, artificial narrow intelligence (ANI), is focused on one narrow task. Weak AI is contrasted with strong AI, which can be interpreted in various ways: Artificial general intelligence (AGI): a machine with the ability to apply intelligence to any problem, rather than just one specific problem. Artificial superintelligence (ASI): a machine with a vastly superior intelligence to the average human being. Artificial consciousness: a machine that has consciousness, sentience and mind (John Searle uses "strong AI" in this sense). Narrow AI can be classified as being "limited to a single, narrowly defined task. Most modern AI systems would be classified in this category." Artificial general intelligence is conversely the opposite. == Applications and risks == Some examples of narrow AI are AlphaGo, self-driving cars, robot systems used in the medical field, and diagnostic doctors. Narrow AI systems are sometimes dangerous if unreliable. And the behavior that it follows can become inconsistent. It could be difficult for the AI to grasp complex patterns and get to a solution that works reliably in various environments. This "brittleness" can cause it to fail in unpredictable ways. Narrow AI failures can sometimes have significant consequences. It could for example cause disruptions in the electric grid, damage nuclear power plants, cause global economic problems, and misdirect autonomous vehicles. Medicines could be incorrectly sorted and distributed. Also, medical diagnoses can ultimately have serious and sometimes deadly consequences if the AI is faulty or biased. Simple AI programs have already worked their way into society, oftentimes unnoticed by the public. Autocorrection for typing, speech recognition for speech-to-text programs, and vast expansions in the data science fields are examples. Narrow AI has also been the subject of some controversy, including resulting in unfair prison sentences, discrimination against women in the workplace for hiring, resulting in death via autonomous driving, among other cases. Despite being "narrow" AI, recommender systems are efficient at predicting user reactions based on their posts, patterns, or trends. For instance, TikTok's "For You" algorithm can determine a user's interests or preferences in less than an hour. Some other social media AI systems are used to detect bots that may be involved in propaganda or other potentially malicious activities. == Weak AI versus strong AI == John Searle contests the possibility of strong AI (by which he means conscious AI). He further believes that the Turing test (created by Alan Turing and originally called the "imitation game", used to assess whether a machine can converse indistinguishably from a human) is not accurate or appropriate for testing whether an AI is "strong". Scholars such as Antonio Lieto have argued that the current research on both AI and cognitive modelling are perfectly aligned with the weak-AI hypothesis (that should not be confused with the "general" vs "narrow" AI distinction) and that the popular assumption that cognitively inspired AI systems espouse the strong AI hypothesis is ill-posed and problematic since "artificial models of brain and mind can be used to understand mental phenomena without pretending that that they are the real phenomena that they are modelling" (as, on the other hand, implied by the strong AI assumption).
Read more →
Eat App

Eat App is a global restaurant technology company that provides a cloud-based management platform for restaurants, hotels, and other venues. The platform enables venues to accept online reservations seamlessly, manage tables, and enhance customer relationship management (CRM). It utilizes AI to improve operational efficiency, provides marketing automation, and helps build a comprehensive guestbook. The company also offers a consumer app and website for discovering and booking restaurant tables online. According to the company, the system has seated over 100 million guests, and the number continues to grow. Eat was founded by Nezar Kadhem and David Feuillard in 2015 and has raised $13M to date from Silicon Valley's 500 startups, Middle East Venture Partners (MEVP), Derayah VC, amongst other business angels. The company is currently operational across the world, with offices in Dubai and the United States. == Product overview == === For restaurants === Eat App’s reservation system allows for a digital record of all reservations, all guests that have previously visited the restaurant, as well as analytics on the performance of the restaurant. The table management feature simplifies traditional restaurant operations by providing a live snapshot of current status, seating optimization, and shift management. The CRM and analytics suite gathers and monitors data to build a segmented guestbook for personalized marketing and provides dashboards for data-driven decision-making. Additionally, the review feature makes it easy for restaurants to automatically collect reviews from their guests. Additionally, Eat App includes a chit printer function that seamlessly prints reservation details at host stands and a review management feature that allows restaurants to manage online reviews directly within the platform. == History == In February 2015, Eat App raised $300k from Bahrain-based business angel group TENMOU. In June 2018, Eat raised $1.2 million from Dubai-based Middle East Venture Partners (MEVP). In February 2020, Eat App raised $5 million in a Series B funding round led by 500 Startups, Derayah Venture Fund, and MEVP, with participation from a few angel investors and family members. In February 2021, Eat App launched its technology with The Emaar Hospitality Group, implementing it across over 50 restaurants in Emaar properties and hotels. The cloud-based system runs natively on iPads in each restaurant, providing Emaar staff access to reservations and guest information, and integrates with the U by Emaar loyalty app to personalize service. On September 28, 2022, Eat App announced the closing of an $11 million Series B funding round. The investment was led by Middle East Venture Partners (MEVP), 500 Startups, Derayah Venture Capital, Dallah Albaraka, Ali Zaid Al Quraishi & Brothers Company, and Rasameel Investment Company, with participation from existing investors.
Read more →
Passenger drone

A passenger drone is an autonomous aircraft that is designed to carry a small number of passengers to a destination. In 2021, Ehang, a technology company based in Guangzhou, China, developed the Ehang 184, the world's first passenger drone. == History == Unmanned aerial vehicles were first introduced in World War 1, when Britain first developed the Aerial Target, an aircraft controlled remotely through radio signals. A year later in the United States, testing of Kettering Bug, a 12-foot long biplane attached with a bomb and that launched via a “slingshot-like rail”, was also under progress. Both of their unreliable test results and their possibility of endangering friendly troops in deployment caused neither aircraft to be used during the war. Production of UAVs continued after World War I and into World War II and the Vietnam War, where they would be invaluable in assisting with training as well as reconnaissance. Late 20th century also saw the proposition and development of unique methods of travel, including personal jetpacks and even flying cars. While the previously mentioned are not drones, they serve as a precursor and foundation for the passenger drones of today. The first passenger drone was unveiled on January 6 of 2016 at the international Consumer Electronics Show (CES) in Las Vegas. Produced by Ehang, a Chinese company based in Guangzhou, the 184 was a one passenger drone equipped with four propellers that could fly for approximately 23 minutes at a top speed of 63 mph. Since then, many new companies have entered the market, but none yet have been accessible by the public. == Technological development == Since 2013, improvements in designs to wing structures have contributed to the economic feasibility of passenger drones. New structural advancements, such as the flapping-wing propulsion system based on the mechanisms of birds’ wings, are more available as they have proven their capabilities in laboratory testing. As of September 29th, 2015, most market-ready drones are delivery drones with a carrying capacity limited to small packages - with a typical max capacity of under 5 pounds. However, while the technology exists for drones with larger carrying capacities, specifically those capable of carrying multiple humans, the execution of this technology is not yet market accessible. This capacity limit must be addressed for passenger drones; given current designs strive to carry a maximum of 5 people. However, some estimates believe that passengers drones could become a reality, specifically for paid transportation and emergency purposes, as early as 2026. With implementation of this technology, there could be significant effects on ground traffic including reducing gridlock in heavily congested areas and conserving up to 15% of the fuel currently used in heavy traffic patterns. However, extensive growth of the passenger drone market also risks clouding the low-altitude airspace and causing new safety risks. However, this concern is being addressed by recent advancements in the Internet of Drones (IoD) which links drones together to ensure appropriate pathing and reduce mid-air collisions. While this brings additional security issues, including maintaining reliable communication channels in the case of technological failure, researchers hope that this will help reduce crashes that can result in damage to passengers, buildings, and people in and around the airspace. == Notable companies == Ehang is a Chinese company that has developed numerous drones including passenger plane Ehang 184. EHang 184 was their first model, developed as an eight dual rotor wing blade drone that can carry two passengers. The model was retired in 2020 and is replaced by the Ehang 216. Ehang also released a one passenger drone, Ehang 116. Ehang in 2021 unveiled the model VT-30. VT-30 is designed to have eight dual rotor wing blades to complement its fixed wing platform. Flyastro, a Texas-based drone company, developed the Astro ALTA, with two and four person passenger models. The company is known for being the first to develop a solar-powered airplane. The development team initially began with the model, Elroy. It was a two passenger drone with similar design to the ALTA. Once flight was achieved, the model Astro ALTA began development. Joby Aviation is a California based company that has developed a five passenger drone, with one seat for the pilot. The company expects to complete its FAA certification process 2022. Joby in 2020 acquired a 75 million dollar investment from service provider Uber Technologies Inc., leading to Uber Elevate and Expands partnership. Archer Aviation is a California-based company that has developed a two passenger model called Maker. It has fixed wings with twelve rotor wings. Archer is developing five person model. United Airlines has partnered with Archer for commercial sale of the model, Maker. Maker is expected to be released within Los Angeles and Miami by 2024. CityAirbus is a drone project developed by Airbus, a European multinational aerospace company, based in the Netherlands. CityAirbus has developed a four- person passenger drone with fixed wings that include rotor wing blades. Its expected certification for public flight is in 2025. Boeing, an American multinational aviation corporation is developing a passenger drone model called the Passenger Air Vehicle (PAV). The model is a fixed wing with eight rotor blade wings attached onto a platform underneath the base structure. This model can hold two passengers and still is in development. Volocopter is a German aircraft manufacturer that is developing a passenger drone called Volocity. The model consist of eighteen rotor wings above the cockpit on a circular ring. Japan Airlines, an investor of Volocopter plans to have public test in Japan as early as 2023. == Future use == === Potential benefits === Passenger drones can greatly reduce the time for travel. As passenger drones flight paths are not restricted by conventional roads, the travel distance is shortened. Current ventures such as Joby Aviation, after acquiring Uber Air, plan to take advantage of this technology in the form of air taxis. Other potential benefits include the use of passenger drones by emergency services such as search and rescue missions and the delivery of life saving goods. Companies like Ehang have already begun using passenger drones as emergency vehicles as a response to the potential river collapses during the flood season in China. === Concerns === Passenger and air traffic safety remains at the forefront of concerns. Regulations for air traffic centered around passenger drones are still underway and would continue to develop with increasing use cases for passenger drones. Remote security threats on commercial drones such as Man-In-The-Middle (MITM) attack have also exposed the vulnerabilities in current drone systems. Among American adults, 54 percent say that they would feel unsafe flying inside a passenger drone. Passenger drones can be very noisy; a single passenger drone such as Joby Aviation’s all-electric vertical take-off and landing (“eVTOL”) aircraft has an estimated noise production of 70 decibels (dB), a noise level equating to “loud traffic”.
Read more →
Time-inhomogeneous hidden Bernoulli model

Time-inhomogeneous hidden Bernoulli model (TI-HBM) is an alternative to hidden Markov model (HMM) for automatic speech recognition. Contrary to HMM, the state transition process in TI-HBM is not a Markov-dependent process, rather it is a generalized Bernoulli (an independent) process. This difference leads to elimination of dynamic programming at state-level in TI-HBM decoding process. Thus, the computational complexity of TI-HBM for probability evaluation and state estimation is O ( N L ) {\displaystyle O(NL)} (instead of O ( N 2 L ) {\displaystyle O(N^{2}L)} in the HMM case, where N {\displaystyle N} and L {\displaystyle L} are number of states and observation sequence length respectively). The TI-HBM is able to model acoustic-unit duration (e.g. phone/word duration) by using a built-in parameter named survival probability. The TI-HBM is simpler and faster than HMM in a phoneme recognition task, but its performance is comparable to HMM. For details, see [1] or [2].
Read more →
Gallery software

Gallery software is software that helps the user publish or share photos, pictures, videos or other digital media. Most galleries are located on Web servers, where users are allowed to register and publish their pictures. Gallery software usually features automatic image resizing, allows digital media be categorized into sets, and allows comments. == Types == Early digital media publishing and sharing was done with imageboards. The boards are by topics, sometimes called "chan". Each discussion in a "chan" are started with a piece of digital media, and follow-up discussions can contain another piece too. Software works in this way: Futallaby, Danbooru. Traditionally, galleries are managed. An administrator maintains a set of or hierarchy of albums. The users can upload their digital media in one of the existing albums defined by an administrator, or create their own albums. The users with sufficient permission can re-categorise the digital media others uploaded. Often, the site's administrator can define which album the users are allowed to categorise their media into, or delete other user's content. Examples are open source galleries Coppermine, Gallery Project. There are decentralised gallery software that does not have an administrator for managing contents. Pinterest, Flickr and DeviantArt has been successful with this model. Open source gallery software MediaGoblin works in this way. Each user can create their own "collections", to categorise theirs or other users' media. However users cannot put media into other user's collections. Each user's category is separate. There is no centralised theme or hierarchy for the media.
Read more →
Read Along

Read Along, formerly known as Bolo, is an Android language-learning app for children developed by Google for the Android operating system. The application was released on the Play Store on March 7, 2019. It features a character named Diya helping children learn to read through illustrated stories. It has the facility to learn English and Indian major languages i.e. Hindi, Bengali, Tamil, Telugu, Marathi and Urdu, as well as Spanish, Portuguese and Arabic. == Technology == The app uses text-to-speech technology, through which the character named Dia reads the story, as well as speech-to-text technology, which mechanically identifies the matches between the text and the reading of the user. The story of Chhota Bheem and Katha Kids was added in September 2019. In April 2020, a new version of the application was released. In September 2020, it added Arabic language to its language option. A web version was launched in August 2022.
Read more →
VideoThang

VideoThang was free video editing software for Windows 2000, XP, and Vista. The software has three parts to it which are My Stuff, Edit My Stuff, and My Mix. The software accepts MOV, AVI, MPG, MP4, PNG, WMV, FLV, and MP3 standards. Its official website is now no longer available. == Reception == Jan Ozer, of Pcmag, said that the software "suffers from several unfortunate design and implementation flaws that dramatically limit output quality and overall utility." Jon L. Jacobi, of PC World, said that the software "may not be the most flexible multimedia editor in the world, but the trim/zoom basics are there, it's free, and it's so simple to use that just about anyone in the world should be able figure it out." Amit Agarwal, of Digital Inspiration, said that the software "doesn’t offer loads of features like other video editors but is perfect for making quick video slideshows of your pictures that you can upload on the web or share via email."
Read more →