AI For Business Brian Hanson

AI For Business Brian Hanson — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Luma (video)

  In video, luma ( Y ′ {\displaystyle Y'} ) represents the brightness in an image (the "black-and-white" or achromatic portion of the image). Luma is typically paired with chroma. Luma represents the achromatic image, while the chroma components represent the color information. Converting R′G′B′ sources (such as the output of a three-CCD camera) into luma and chroma allows for chroma subsampling: because human vision has finer spatial sensitivity to luminance ("black and white") differences than chromatic differences, video systems can store and transmit chromatic information at lower resolution, optimizing perceived detail at a particular bandwidth. == Luma versus relative luminance == Luma is the weighted sum of gamma-compressed R′G′B′ components of a color video—the prime symbols ′ denote gamma compression. The word was proposed to prevent confusion between luma as implemented in video engineering and relative luminance as used in color science (i.e. as defined by CIE). Relative luminance is formed as a weighted sum of linear RGB components, not gamma-compressed ones. Even so, luma is sometimes erroneously called luminance. SMPTE EG 28 recommends the symbol Y ′ {\displaystyle Y'} to denote luma and the symbol Y {\displaystyle Y} to denote relative luminance. === Use of relative luminance === While luma is more often encountered, relative luminance is sometimes used in video engineering when referring to the brightness of a monitor. The formula used to calculate relative luminance uses coefficients based on the CIE color matching functions and the relevant standard chromaticities of red, green, and blue (e.g., the original NTSC primaries, SMPTE C, or Rec. 709). For the Rec. 709 (and sRGB) primaries, the linear combination, based on pure colorimetric considerations and the definition of relative luminance is: Y = 0.2126 R + 0.7152 G + 0.0722 B {\displaystyle Y=0.2126R+0.7152G+0.0722B} The formula used to calculate luma in the Rec. 709 spec arbitrarily also uses these same coefficients, but with gamma-compressed components: Y ′ = 0.2126 R ′ + 0.7152 G ′ + 0.0722 B ′ , {\displaystyle Y'=0.2126R'+0.7152G'+0.0722B',} where the prime symbol ′ denotes gamma compression. == Rec. 601 luma versus Rec. 709 luma coefficients == For digital formats following CCIR 601 (i.e. most digital standard definition formats), luma is calculated with this formula: Y 601 ′ = 0.299 R ′ + 0.587 G ′ + 0.114 B ′ {\displaystyle Y'_{\text{601}}=0.299R'+0.587G'+0.114B'} Formats following ITU-R Recommendation BT. 709 (i.e. most digital high definition formats) use a different formula: Y 709 ′ = 0.2126 R ′ + 0.7152 G ′ + 0.0722 B ′ {\displaystyle Y'_{\text{709}}=0.2126R'+0.7152G'+0.0722B'} Modern HDTV systems use the 709 coefficients, while transitional 1035i HDTV (MUSE) formats may use the SMPTE 240M coefficients: Y 240 ′ = 0.212 R ′ + 0.701 G ′ + 0.087 B ′ = Y 145 ′ {\displaystyle Y'_{\text{240}}=0.212R'+0.701G'+0.087B'=Y'_{\text{145}}} These coefficients correspond to the SMPTE RP 145 primaries (also known as "SMPTE C") in use at the time the standard was created. The change in the luma coefficients is to provide the "theoretically correct" coefficients that reflect the corresponding standard chromaticities ('colors') of the primaries red, green, and blue. However, there is some controversy regarding this decision. The difference in luma coefficients requires that component signals must be converted between Rec. 601 and Rec. 709 to provide accurate colors. In consumer equipment, the matrix required to perform this conversion may be omitted (to reduce cost), resulting in inaccurate color. == Luma and luminance errors == As well, the Rec. 709 luma coefficients may not necessarily provide better performance. Because of the difference between luma and relative luminance, luma does not exactly represent the luminance in an image. As a result, errors in chroma can affect luminance. Luma alone does not perfectly represent luminance; accurate luminance requires both accurate luma and chroma. Hence, errors in chroma "bleed" into the luminance of an image. Note the bleeding in lightness near the borders. Due to the widespread usage of chroma subsampling, errors in chroma typically occur when it is lowered in resolution/bandwidth. This lowered bandwidth, coupled with high frequency chroma components, can cause visible errors in luminance. An example of a high frequency chroma component would be the line between the green and magenta bars of the SMPTE color bars test pattern. Error in luminance can be seen as a dark band that occurs in this area.

  Read more →
• 

  Non-human

  Non-human (also spelled nonhuman) is any entity displaying some, but not enough, human characteristics to be considered a human. The term has been used in a variety of contexts and may refer to objects that have been developed with human intelligence, such as robots or vehicles. == Organisms == === Animal rights and personhood === In the animal rights movement, it is common to distinguish between "human animals" and "non-human animals". Participants in the animal rights movement generally recognize that non-human animals have some similar characteristics to those of human persons. For example, various non-human animals have been shown to register pain, compassion, memory, and some cognitive function. Some animal rights activists argue that the similarities between human and non-human animals justify giving non-human animals rights that human society has afforded to humans, such as the right to self-preservation, and some even wish for all non-human animals or at least those that bear a fully thinking and conscious mind, such as vertebrates and some invertebrates such as cephalopods, to be given a full right of personhood. === The non-human in philosophy === Contemporary philosophers have drawn on the work of Henri Bergson, Gilles Deleuze, Félix Guattari, and Claude Lévi-Strauss (among others) to suggest that the non-human poses epistemological and ontological problems for humanist and post-humanist ethics, and have linked the study of non-humans to materialist and ethological approaches to the study of society and culture. == Software and robots == The term non-human has been used to describe computer programs and robot-like devices that display some human-like characteristics. In both science fiction and in the real world, computer programs and robots have been built to perform tasks that require human-computer interactions in a manner that suggests sentience and compassion. There is increasing interest in the use of robots in nursing homes and to provide elder care. Computer programs have been used for years in schools to provide one-on-one education with children. The Tamagotchi toy required children to provide care, attention, and nourishment to keep it "alive".

  Read more →
• 

  Knowledge graph embedding

  In representation learning, knowledge graph embedding (KGE), also called knowledge representation learning (KRL), or multi-relation learning, is a machine learning task of learning a low-dimensional representation of a knowledge graph's entities and relations while preserving their semantic meaning. Leveraging their embedded representation, knowledge graphs can be used for various applications such as link prediction, triple classification, entity recognition, clustering, and relation extraction. == Definition == A knowledge graph G = { E , R , F } {\displaystyle {\mathcal {G}}=\{E,R,F\}} is a collection of entities E {\displaystyle E} , relations R {\displaystyle R} , and facts F {\displaystyle F} . A fact is a triple ( h , r , t ) ∈ F {\displaystyle (h,r,t)\in F} that denotes a link r ∈ R {\displaystyle r\in R} between the head h ∈ E {\displaystyle h\in E} and the tail t ∈ E {\displaystyle t\in E} of the triple. Another notation that is often used in the literature to represent a triple (or fact) is ⟨ head , relation , tail ⟩ {\displaystyle \langle {\text{head}},{\text{relation}},{\text{tail}}\rangle } . This notation is called the Resource Description Framework (RDF). A knowledge graph represents the knowledge related to a specific domain; leveraging this structured representation, it is possible to infer a piece of new knowledge from it after some refinement steps. However, nowadays, people have to deal with the sparsity of data and the computational inefficiency to use them in a real-world application. The embedding of a knowledge graph is a function that translates each entity and each relation into a vector of a given dimension d {\displaystyle d} , called embedding dimension. It is even possible to embed the entities and relations with different dimensions. The embedding vectors can then be used for other tasks. A knowledge graph embedding is characterized by four aspects: Representation space: The low-dimensional space in which the entities and relations are represented. Scoring function: A measure of the goodness of a triple-embedded representation. Encoding models: The modality in which the embedded representation of the entities and relations interact with each other. Additional information: Any additional information coming from the knowledge graph that can enrich the embedded representation. Usually, an ad hoc scoring function is integrated into the general scoring function for each additional piece of information. == Embedding procedure == All algorithms for creating a knowledge graph embedding follow the same approach. First, the embedding vectors are initialized to random values. Then, they are iteratively optimized using a training set of triples. In each iteration, a batch of size b {\displaystyle b} triples is sampled from the training set, and a triple from it is sampled and corrupted—i.e., a triple that does not represent a true fact in the knowledge graph. The corruption of a triple involves substituting the head or the tail (or both) of the triple with another entity that makes the fact false. The original triple and the corrupted triple are added in the training batch, and then the embeddings are updated, optimizing a scoring function. Iteration stops when a stop condition is reached. Usually, the stop condition depends on the overfitting of the training set. At the end, the learned embeddings should have extracted semantic meaning from the training triples and should correctly predict unseen true facts in the knowledge graph. === Pseudocode === The following is the pseudocode for the general embedding procedure. algorithm Compute entity and relation embeddings input: The training set S = { ( h , r , t ) } {\displaystyle S=\{(h,r,t)\}} , entity set E {\displaystyle E} , relation set R {\displaystyle R} , embedding dimension k {\displaystyle k} output: Entity and relation embeddings initialization: the entities e {\displaystyle e} and relations r {\displaystyle r} embeddings (vectors) are randomly initialized while stop condition do S b a t c h ← s a m p l e ( S , b ) {\displaystyle S_{batch}\leftarrow sample(S,b)} // Sample a batch from the training set for each ( h , r , t ) {\displaystyle (h,r,t)} in S b a t c h {\displaystyle S_{batch}} do ( h ′ , r , t ′ ) ← s a m p l e ( S ′ ) {\displaystyle (h',r,t')\leftarrow sample(S')} // Sample a corrupted fact T b a t c h ← T b a t c h ∪ { ( ( h , r , t ) , ( h ′ , r , t ′ ) ) } {\displaystyle T_{batch}\leftarrow T_{batch}\cup \{((h,r,t),(h',r,t'))\}} end for Update embeddings by minimizing the loss function end while == Performance indicators == These indexes are often used to measure the embedding quality of a model. The simplicity of the indexes makes them very suitable for evaluating the performance of an embedding algorithm even on a large scale. Given Q {\displaystyle {\ce {Q}}} as the set of all ranked predictions of a model, it is possible to define three different performance indexes: Hits@K, MR, and MRR. === Hits@K === Hits@K or in short, H@K, is a performance index that measures the probability to find the correct prediction in the first top K model predictions. Usually, it is used k = 10 {\displaystyle k=10} . Hits@K reflects the accuracy of an embedding model to predict the relation between two given triples correctly. Hits@K = | { q ∈ Q : q < k } | | Q | ∈ [ 0 , 1 ] {\displaystyle ={\frac {|\{q\in Q:q Read more →

• 

  Evolvability (computer science)

  The term evolvability is a framework of computational learning introduced by Leslie Valiant in his paper of the same name. The aim of this theory is to model biological evolution and categorize which types of mechanisms are evolvable. Evolution is an extension of PAC learning and learning from statistical queries. == General framework == Let F n {\displaystyle F_{n}\,} and R n {\displaystyle R_{n}\,} be collections of functions on n {\displaystyle n\,} variables. Given an ideal function f ∈ F n {\displaystyle f\in F_{n}} , the goal is to find by local search a representation r ∈ R n {\displaystyle r\in R_{n}} that closely approximates f {\displaystyle f\,} . This closeness is measured by the performance Perf ⁡ ( f , r ) {\displaystyle \operatorname {Perf} (f,r)} of r {\displaystyle r\,} with respect to f {\displaystyle f\,} . As is the case in the biological world, there is a difference between genotype and phenotype. In general, there can be multiple representations (genotypes) that correspond to the same function (phenotype). That is, for some r , r ′ ∈ R n {\displaystyle r,r'\in R_{n}} , with r ≠ r ′ {\displaystyle r\neq r'\,} , still r ( x ) = r ′ ( x ) {\displaystyle r(x)=r'(x)\,} for all x ∈ X n {\displaystyle x\in X_{n}} . However, this need not be the case. The goal then, is to find a representation that closely matches the phenotype of the ideal function, and the spirit of the local search is to allow only small changes in the genotype. Let the neighborhood N ( r ) {\displaystyle N(r)\,} of a representation r {\displaystyle r\,} be the set of possible mutations of r {\displaystyle r\,} . For simplicity, consider Boolean functions on X n = { − 1 , 1 } n {\displaystyle X_{n}=\{-1,1\}^{n}\,} , and let D n {\displaystyle D_{n}\,} be a probability distribution on X n {\displaystyle X_{n}\,} . Define the performance in terms of this. Specifically, Perf ⁡ ( f , r ) = ∑ x ∈ X n f ( x ) r ( x ) D n ( x ) . {\displaystyle \operatorname {Perf} (f,r)=\sum _{x\in X_{n}}f(x)r(x)D_{n}(x).} Note that Perf ⁡ ( f , r ) = Prob ⁡ ( f ( x ) = r ( x ) ) − Prob ⁡ ( f ( x ) ≠ r ( x ) ) . {\displaystyle \operatorname {Perf} (f,r)=\operatorname {Prob} (f(x)=r(x))-\operatorname {Prob} (f(x)\neq r(x)).} In general, for non-Boolean functions, the performance will not correspond directly to the probability that the functions agree, although it will have some relationship. Throughout an organism's life, it will only experience a limited number of environments, so its performance cannot be determined exactly. The empirical performance is defined by Perf s ⁡ ( f , r ) = 1 s ∑ x ∈ S f ( x ) r ( x ) , {\displaystyle \operatorname {Perf} _{s}(f,r)={\frac {1}{s}}\sum _{x\in S}f(x)r(x),} where S {\displaystyle S\,} is a multiset of s {\displaystyle s\,} independent selections from X n {\displaystyle X_{n}\,} according to D n {\displaystyle D_{n}\,} . If s {\displaystyle s\,} is large enough, evidently Perf s ⁡ ( f , r ) {\displaystyle \operatorname {Perf} _{s}(f,r)} will be close to the actual performance Perf ⁡ ( f , r ) {\displaystyle \operatorname {Perf} (f,r)} . Given an ideal function f ∈ F n {\displaystyle f\in F_{n}} , initial representation r ∈ R n {\displaystyle r\in R_{n}} , sample size s {\displaystyle s\,} , and tolerance t {\displaystyle t\,} , the mutator Mut ⁡ ( f , r , s , t ) {\displaystyle \operatorname {Mut} (f,r,s,t)} is a random variable defined as follows. Each r ′ ∈ N ( r ) {\displaystyle r'\in N(r)} is classified as beneficial, neutral, or deleterious, depending on its empirical performance. Specifically, r ′ {\displaystyle r'\,} is a beneficial mutation if Perf s ⁡ ( f , r ′ ) − Perf s ⁡ ( f , r ) ≥ t {\displaystyle \operatorname {Perf} _{s}(f,r')-\operatorname {Perf} _{s}(f,r)\geq t} ; r ′ {\displaystyle r'\,} is a neutral mutation if − t < Perf s ⁡ ( f , r ′ ) − Perf s ⁡ ( f , r ) < t {\displaystyle -t<\operatorname {Perf} _{s}(f,r')-\operatorname {Perf} _{s}(f,r) 0 {\displaystyle \epsilon >0\,} , for all ideal functions f ∈ F n {\displaystyle f\in F_{n}} and representations r 0 ∈ R n {\displaystyle r_{0}\in R_{n}} , with probability at least 1 − ϵ {\displaystyle 1-\epsilon \,} , Perf ⁡ ( f , r g ( n , 1 / ϵ ) ) ≥ 1 − ϵ , {\displaystyle \operatorname {Perf} (f,r_{g(n,1/\epsilon )})\geq 1-\epsilon ,} where the sizes of neighborhoods N ( r ) {\displaystyle N(r)\,} for r ∈ R n {\displaystyle r\in R_{n}\,} are at most p ( n , 1 / ϵ ) {\displaystyle p(n,1/\epsilon )\,} , the sample size is s ( n , 1 / ϵ ) {\displaystyle s(n,1/\epsilon )\,} , the tolerance is t ( 1 / n , ϵ ) {\displaystyle t(1/n,\epsilon )\,} , and the generation size is g ( n , 1 / ϵ ) {\displaystyle g(n,1/\epsilon )\,} . F {\displaystyle F\,} is evolvable over D {\displaystyle D\,} if it is evolvable by some R {\displaystyle R\,} over D {\displaystyle D\,} . F {\displaystyle F\,} is evolvable if it is evolvable over all distributions D {\displaystyle D\,} . == Results == The class of conjunctions and the class of disjunctions are evolvable over the uniform distribution for short conjunctions and disjunctions, respectively. The class of parity functions (which evaluate to the parity of the number of true literals in a given subset of literals) are not evolvable, even for the uniform distribution. Evolvability implies PAC learnability.

  Read more →
• 

  Pedagogical agent

  A pedagogical agent is a concept borrowed from computer science and artificial intelligence and applied to education, usually as part of an intelligent tutoring system (ITS). It is a simulated human-like interface between the learner and the content, in an educational environment. A pedagogical agent is designed to model the type of interactions between a student and another person. Mabanza and de Wet define it as "a character enacted by a computer that interacts with the user in a socially engaging manner". A pedagogical agent can be assigned different roles in the learning environment, such as tutor or co-learner, depending on the desired purpose of the agent. "A tutor agent plays the role of a teacher, while a co-learner agent plays the role of a learning companion". == History == The history of Pedagogical Agents is closely aligned with the history of computer animation. As computer animation progressed, it was adopted by educators to enhance computerized learning by including a lifelike interface between the program and the learner. The first versions of a pedagogical agent were more cartoon than person, like Microsoft's Clippy which helped users of Microsoft Office load and use the program's features in 1997. However, with developments in computer animation, pedagogical agents can now look lifelike. By 2006 there was a call to develop modular, reusable agents to decrease the time and expertise required to create a pedagogical agent. There was also a call in 2009 to enact agent standards. The standardization and re-usability of pedagogical agents is less of an issue since the decrease in cost and widespread availability of animation tools. Individualized pedagogical agents can be found across disciplines including medicine, math, law, language learning, automotive, and armed forces. They are used in applications directed to every age, from preschool to adult. == Learning theories related to pedagogical agent design == === Distributed cognition theory === Distributed cognition theory is the method in which cognition progresses in the context of collaboration with others. Pedagogical agents can be designed to assist the cognitive transfer to the learner, operating as artifacts or partners with collaborative role in learning. To support the performance of an action by the user, the pedagogical agent can act as a cognitive tool as long as the agent is equipped with the knowledge that the user lacks. The interactions between the user and the pedagogical agent can facilitate a social relationship. The pedagogical agent may fulfill the role of a working partner. === Socio-cultural learning theory === Socio-cultural learning theory is how the user develops when they are involved in learning activities in which there is interaction with other agents. A pedagogical agent can: intervene when the user requests, provide support for tasks that the user cannot address, and potentially extend the learners cognitive reach. Interaction with the pedagogical agent may elicit a variety of emotions from the learner. The learner may become excited, confused, frustrated, and/or discouraged. These emotions affect the learners' motivation. === Extraneous Cognitive Load === Extraneous cognitive load is the extra effort being exerted by an individual's working memory due to the way information is being presented. A pedagogical agent can increase the user's cognitive load by distracting them and becoming the focus of their attention, causing split attention between the instructional material and the agent. Agents can reduce the perceived cognitive load by providing narration and personalization that can also promote a user's interest and motivation. While research on the reduction of cognitive load from pedagogical agents is minimal, more studies have shown that agents do not increase it. == Effectiveness == It has been suggested by researchers that pedagogical agents may take on different roles in the learning environment. Examples of these roles are: supplanting, scaffolding, coaching, testing, or demonstrating or modelling a procedure. A pedagogical agent as a tutor has not been demonstrated to add any benefit to an educational strategy in equivalent lessons with and without a pedagogical agent. According to Richard Mayer, there is some support in research for pedagogical agent increasing learning, but only as a presenter of social cues. A co-learner pedagogical agent is believed to increase the student's self-efficacy. By pointing out important features of instructional content, a pedagogical agent can fulfill the signaling function, which research on multimedia learning has shown to enhance learning. Research has demonstrated that human-human interaction may not be completely replaced by pedagogical agents, but learners may prefer the agents to non-agent multimedia systems. This finding is supported by social agency theory. Much like the varying effectiveness of the pedagogical agent roles in the learning environment, agents that take into account the user's affect have had mixed results. Research has shown pedagogical agents that make use of the users’ affect have been found to increase user knowledge retention, motivation, and perceived self-efficacy. However, with such a broad range of modalities in affective expressions, it is often difficult to utilize them. Additionally, having agents detect a user's affective state with precision remains challenging, as displays of affect are different across individuals. == Design == === Attractiveness === The appearance of a pedagogical agent can be manipulated to meet the learning requirements. The attractiveness of a pedagogical agent can enhance student's learning when the users were the opposite gender of the pedagogical agent. Male students prefer a sexy appearance of a female pedagogical agents and dislike the sexy appearance of male agents. Female students were not attracted by the sexy appearance of either male or female pedagogical agents. === Affective Response === Pedagogical agents have reached a point where they can convey and elicit emotion, but also reason about and respond to it. These agents are often designed to elicit and respond to affective actions from users through various modalities such as speech, facial expressions, and body gestures. They respond to the affective state of the given user, and make use of these modalities using a wide array of sensors incorporated into the design of the agent. Specifically in education and training applications, pedagogical agents are often designed to increasingly recognize when users or learners exhibit frustration, boredom, confusion, and states of flow. The added recognition in these agents is a step toward making them more emotionally intelligent, comforting and motivating the users as they interact. === Digital Representation === The design of a pedagogical agent often begins with its digital representation, whether it will be 2D or 3D and static or animated. Several studies have developed pedagogical agents that were both static and animated, then evaluated the relative benefits. Similar to other design considerations, the improved learning from static or animated agents remains questionable. One study showed that the appearance of an agent portrayed using a static image can impact a user's recall, based on the visual appearance. Other research found results that suggest static agent images improve learning outcomes. However, several other studies found user's learned more when the pedagogical agent was animated rather than static. Recently a meta-analysis of such research found a negligible improvement in learning via pedagogical agents, suggesting more work needs to be done in the area to support any claims.

  Read more →
• 

  Intelligent agent

  In artificial intelligence, an intelligent agent is an entity that perceives its environment, takes actions autonomously to achieve goals, and may improve its performance through machine learning or by acquiring knowledge. AI textbooks define artificial intelligence as the "study and design of intelligent agents," emphasizing that goal-directed behavior is central to intelligence. A specialized subset of intelligent agents, agentic AI (also known as an AI agent or simply agent), expands this concept by proactively pursuing goals, making decisions, and taking actions over extended periods. Intelligent agents can range from simple to highly complex. A basic thermostat or control system is considered an intelligent agent, as is a human being, or any other system that meets the same criteria—such as a firm, a state, or a biome. Intelligent agents operate based on an objective function, which encapsulates their goals. They are designed to create and execute plans that maximize the expected value of this function upon completion. For example, a reinforcement learning agent has a reward function, which allows programmers to shape its desired behavior. Similarly, an evolutionary algorithm's behavior is guided by a fitness function. Intelligent agents in artificial intelligence are closely related to agents in economics, and versions of the intelligent agent paradigm are studied in cognitive science, ethics, and the philosophy of practical reason, as well as in many interdisciplinary socio-cognitive modeling and computer social simulations. Intelligent agents are often described schematically as abstract functional systems similar to computer programs . To distinguish theoretical models from real-world implementations, abstract descriptions of intelligent agents are called abstract intelligent agents. Intelligent agents are also closely related to software agents—autonomous computer programs that carry out tasks on behalf of users. They are also referred to using a term borrowed from economics: a "rational agent". == Intelligent agents as the foundation of AI == The concept of intelligent agents provides a foundational lens through which to define and understand artificial intelligence. For instance, the influential textbook Artificial Intelligence: A Modern Approach (Russell & Norvig) describes: Agent: Anything that perceives its environment (using sensors) and acts upon it (using actuators). E.g., a robot with cameras and wheels, or a software program that reads data and makes recommendations. Rational Agent: An agent that strives to achieve the best possible outcome based on its knowledge and past experiences. "Best" is defined by a performance measure – a way of evaluating how well the agent is doing. Artificial Intelligence (as a field): The study and creation of these rational agents. Other researchers and definitions build upon this foundation. Padgham & Winikoff emphasize that intelligent agents should react to changes in their environment in a timely way, proactively pursue goals, and be flexible and robust (able to handle unexpected situations). Some also suggest that ideal agents should be "rational" in the economic sense (making optimal choices) and capable of complex reasoning, like having beliefs, desires, and intentions (BDI model). Kaplan and Haenlein offer a similar definition, focusing on a system's ability to understand external data, learn from that data, and use what is learned to achieve goals through flexible adaptation. Defining AI in terms of intelligent agents offers several key advantages: Avoids Philosophical Debates: It sidesteps arguments about whether AI is "truly" intelligent or conscious, like those raised by the Turing test or Searle's Chinese Room. It focuses on behavior and goal achievement, not on replicating human thought. Objective Testing: It provides a clear, scientific way to evaluate AI systems. Researchers can compare different approaches by measuring how well they maximize a specific "goal function" (or objective function). This allows for direct comparison and combination of techniques. Interdisciplinary Communication: It creates a common language for AI researchers to collaborate with other fields like mathematical optimization and economics, which also use concepts like "goals" and "rational agents." == Objective function == An objective function (or goal function) specifies the goals of an intelligent agent. An agent is deemed more intelligent if it consistently selects actions that yield outcomes better aligned with its objective function. In effect, the objective function serves as a measure of success. The objective function may be: Simple: For example, in a game of Go, the objective function might assign a value of 1 for a win and 0 for a loss. Complex: It might require the agent to evaluate and learn from past actions, adapting its behavior based on patterns that have proven effective. The objective function encapsulates all of the goals the agent is designed to achieve. For rational agents, it also incorporates the trade-offs between potentially conflicting goals. For instance, a self-driving car's objective function might balance factors such as safety, speed, and passenger comfort. Different terms are used to describe this concept, depending on the context. These include: Utility function: Often used in economics and decision theory, representing the desirability of a state. Objective function: A general term used in optimization. Loss function: Typically used in machine learning, where the goal is to minimize the loss (error). Reward Function: Used in reinforcement learning. Fitness Function: Used in evolutionary systems. Goals, and therefore the objective function, can be: Explicitly defined: Programmed directly into the agent. Induced: Learned or evolved over time. In reinforcement learning, a "reward function" provides feedback, encouraging desired behaviors and discouraging undesirable ones. The agent learns to maximize its cumulative reward. In evolutionary systems, a "fitness function" determines which agents are more likely to reproduce. This is analogous to natural selection, where organisms evolve to maximize their chances of survival and reproduction. Some AI systems, such as nearest-neighbor, reason by analogy rather than being explicitly goal-driven. However, even these systems can have goals implicitly defined within their training data. Such systems can still be benchmarked by framing the non-goal system as one whose "goal" is to accomplish its narrow classification task. Systems not traditionally considered agents, like knowledge-representation systems, are sometimes included in the paradigm by framing them as agents with a goal of, for example, answering questions accurately. Here, the concept of an "action" is extended to encompass the "act" of providing an answer. As a further extension, mimicry-driven systems can be framed as agents optimizing a "goal function" based on how closely the agent mimics the desired behavior. In generative adversarial networks (GANs) of the 2010s, an "encoder"/"generator" component attempts to mimic and improvise human text composition. The generator tries to maximize a function representing how well it can fool an antagonistic "predictor"/"discriminator" component. While symbolic AI systems often use an explicit goal function, the paradigm also applies to neural networks and evolutionary computing. Reinforcement learning can generate intelligent agents that appear to act in ways intended to maximize a "reward function". Sometimes, instead of setting the reward function directly equal to the desired benchmark evaluation function, machine learning programmers use reward shaping to initially give the machine rewards for incremental progress. Yann LeCun stated in 2018, "Most of the learning algorithms that people have come up with essentially consist of minimizing some objective function." AlphaZero chess had a simple objective function: +1 point for each win, and -1 point for each loss. A self-driving car's objective function would be more complex. Evolutionary computing can evolve intelligent agents that appear to act in ways intended to maximize a "fitness function" influencing how many descendants each agent is allowed to leave. The mathematical formalism of AIXI was proposed as a maximally intelligent agent in this paradigm. However, AIXI is uncomputable. In the real world, an intelligent agent is constrained by finite time and hardware resources, and scientists compete to produce algorithms that achieve progressively higher scores on benchmark tests with existing hardware. == Agent function == An intelligent agent's behavior can be described mathematically by an agent function. This function determines what the agent does based on what it has seen. A percept refers to the agent's sensory inputs at a single point in time. For example, a self-driving car's percepts might include camera images, lidar data, GPS coordinates, and speed r

  Read more →
• 

  Label noise

  Label noise refers to errors or inaccuracies in the class labels of data instances. This is a widespread issue in machine learning datasets, arising from human annotator mistakes, unclear labeling instructions, automated labeling methods, or adversarial attacks in supervised learning. Label noise can be roughly divided into random noise, where labels are flipped independently of input features, and systematic noise, where mislabeling is dependent on certain patterns or biases in the data. Label noise can be damaging to model performance, especially for complex models that may overfit to noisy labels rather than generalizable patterns. Many approaches have been proposed to deal with the effects of label noise, including robust loss functions, noise-tolerant algorithms, data cleaning methods, and semi-supervised learning approaches. To reduce the impact of wrong labels during training, techniques like label smoothing, sample reweighting and using trusted validation sets are used. The role of noise-robust training paradigms and curriculum learning strategies to improve resilience against mislabeled data is also explored in recent research.

  Read more →
• 

  Right to explanation

  In the regulation of algorithms, particularly artificial intelligence and its subfield of machine learning, a right to [an] explanation is a right to be given an explanation for an output of the algorithm. Such rights primarily refer to individual rights to be given an explanation for decisions that significantly affect an individual, particularly legally or financially. For example, a person who applies for a loan and is denied may ask for an explanation, which could be "Credit bureau X reports that you declared bankruptcy last year; this is the main factor in considering you too likely to default, and thus we will not give you the loan you applied for." Some such legal rights already exist, while the scope of a general "right to explanation" is a matter of ongoing debate. There have been arguments made that a "social right to explanation" is a crucial foundation for an information society, particularly as the institutions of that society will need to use digital technologies, artificial intelligence, machine learning. In other words, that the related automated decision making systems that use explainability would be more trustworthy and transparent. Without this right, which could be constituted both legally and through professional standards, the public will be left without much recourse to challenge the decisions of automated systems. == Examples == === Credit scoring in the United States === Under the Equal Credit Opportunity Act (Regulation B of the Code of Federal Regulations), Title 12, Chapter X, Part 1002, §1002.9, creditors are required to notify applicants who are denied credit with specific reasons for the detail. As detailed in §1002.9(b)(2): (2) Statement of specific reasons. The statement of reasons for adverse action required by paragraph (a)(2)(i) of this section must be specific and indicate the principal reason(s) for the adverse action. Statements that the adverse action was based on the creditor's internal standards or policies or that the applicant, joint applicant, or similar party failed to achieve a qualifying score on the creditor's credit scoring system are insufficient. The official interpretation of this section details what types of statements are acceptable. Creditors comply with this regulation by providing a list of reasons (generally at most 4, per interpretation of regulations), consisting of a numeric reason code (as identifier) and an associated explanation, identifying the main factors affecting a credit score. An example might be: 32: Balances on bankcard or revolving accounts too high compared to credit limits === European Union === The European Union General Data Protection Regulation (GDPR, enacted 2016, taking effect 2018) extends the automated decision-making rights in the 1995 Data Protection Directive to provide a legally disputed form of a right to an explanation, stated as such in Recital 71: "[the data subject should have] the right ... to obtain an explanation of the decision reached". In full: The data subject should have the right not to be subject to a decision, which may include a measure, evaluating personal aspects relating to him or her which is based solely on automated processing and which produces legal effects concerning him or her or similarly significantly affects him or her, such as automatic refusal of an online credit application or e-recruiting practices without any human intervention. ... In any case, such processing should be subject to suitable safeguards, which should include specific information to the data subject and the right to obtain human intervention, to express his or her point of view, to obtain an explanation of the decision reached after such assessment and to challenge the decision. However, the extent to which the regulations themselves provide a "right to explanation" is heavily debated. There are two main strands of criticism. There are significant legal issues with the right as found in Article 22 — as recitals are not binding, and the right to an explanation is not mentioned in the binding articles of the text, having been removed during the legislative process. In addition, there are significant restrictions on the types of automated decisions that are covered — which must be both "solely" based on automated processing, and have legal or similarly significant effects — which significantly limits the range of automated systems and decisions to which the right would apply. In particular, the right is unlikely to apply in many of the cases of algorithmic controversy that have been picked up in the media. The UK has also recently amended its implementation of Article 22. A second potential source of such a right has been pointed to in Article 15, the "right of access by the data subject". This restates a similar provision from the 1995 Data Protection Directive, allowing the data subject access to "meaningful information about the logic involved" in the same significant, solely automated decision-making, found in Article 22. Yet this too suffers from alleged challenges that relate to the timing of when this right can be drawn upon, as well as practical challenges that mean it may not be binding in many cases of public concern. Other EU legislative instruments contain explanation rights. The European Union's Artificial Intelligence Act provides in Article 86 a "[r]ight to explanation of individual decision-making" of certain high risk systems which produce significant, adverse effects to an individual's health, safety or fundamental rights. The right provides for "clear and meaningful explanations of the role of the AI system in the decision-making procedure and the main elements of the decision taken", although only applies to the extent other law does not provide such a right. The Digital Services Act in Article 27, and the Platform to Business Regulation in Article 5, both contain rights to have the main parameters of certain recommender systems to be made clear, although these provisions have been criticised as not matching the way that such systems work. The Platform Work Directive, which provides for regulation of automation in gig economy work as an extension of data protection law, further contains explanation provisions in Article 11, using the specific language of "explanation" in a binding article rather than a recital as is the case in the GDPR. Scholars note that remains uncertainty as to whether these provisions imply sufficiently tailored explanation in practice which will need to be resolved by courts. === France === In France the 2016 Loi pour une République numérique (Digital Republic Act or loi numérique) amends the country's administrative code to introduce a new provision for the explanation of decisions made by public sector bodies about individuals. It notes that where there is "a decision taken on the basis of an algorithmic treatment", the rules that define that treatment and its "principal characteristics" must be communicated to the citizen upon request, where there is not an exclusion (e.g. for national security or defence). These should include the following: the degree and the mode of contribution of the algorithmic processing to the decision- making; the data processed and its source; the treatment parameters, and where appropriate, their weighting, applied to the situation of the person concerned; the operations carried out by the treatment. Scholars have noted that this right, while limited to administrative decisions, goes beyond the GDPR right to explicitly apply to decision support rather than decisions "solely" based on automated processing, as well as provides a framework for explaining specific decisions. Indeed, the GDPR automated decision-making rights in the European Union, one of the places a "right to an explanation" has been sought within, find their origins in French law in the late 1970s. == Criticism == Some argue that a "right to explanation" is at best unnecessary, at worst harmful, and threatens to stifle innovation. Specific criticisms include: favoring human decisions over machine decisions, being redundant with existing laws, and focusing on process over outcome. Authors of study "Slave to the Algorithm? Why a 'Right to an Explanation' Is Probably Not the Remedy You Are Looking For" Lilian Edwards and Michael Veale argue that a right to explanation is not the solution to harms caused to stakeholders by algorithmic decisions. They also state that the right of explanation in the GDPR is narrowly defined, and is not compatible with how modern machine learning technologies are being developed. With these limitations, defining transparency within the context of algorithmic accountability remains a problem. For example, providing the source code of algorithms may not be sufficient and may create other problems in terms of privacy disclosures and the gaming of technical systems. To mitigate this issue, Edwards and Veale argue that an auditing system could be more effective, to allow auditors to loo

  Read more →
• 

  Matrix regularization

  In the field of statistical learning theory, matrix regularization generalizes notions of vector regularization to cases where the object to be learned is a matrix. The purpose of regularization is to enforce conditions, for example sparsity or smoothness, that can produce stable predictive functions. For example, in the more common vector framework, Tikhonov regularization optimizes over min x ‖ A x − y ‖ 2 + λ ‖ x ‖ 2 {\displaystyle \min _{x}\left\|Ax-y\right\|^{2}+\lambda \left\|x\right\|^{2}} to find a vector x {\displaystyle x} that is a stable solution to the regression problem. When the system is described by a matrix rather than a vector, this problem can be written as min X ‖ A X − Y ‖ 2 + λ ‖ X ‖ 2 , {\displaystyle \min _{X}\left\|AX-Y\right\|^{2}+\lambda \left\|X\right\|^{2},} where the vector norm enforcing a regularization penalty on x {\displaystyle x} has been extended to a matrix norm on X {\displaystyle X} . Matrix regularization has applications in matrix completion, multivariate regression, and multi-task learning. Ideas of feature and group selection can also be extended to matrices, and these can be generalized to the nonparametric case of multiple kernel learning. == Basic definition == Consider a matrix W {\displaystyle W} to be learned from a set of examples, S = ( X i t , y i t ) {\displaystyle S=(X_{i}^{t},y_{i}^{t})} , where i {\displaystyle i} goes from 1 {\displaystyle 1} to n {\displaystyle n} , and t {\displaystyle t} goes from 1 {\displaystyle 1} to T {\displaystyle T} . Let each input matrix X i {\displaystyle X_{i}} be ∈ R D T {\displaystyle \in \mathbb {R} ^{DT}} , and let W {\displaystyle W} be of size D × T {\displaystyle D\times T} . A general model for the output y {\displaystyle y} can be posed as y i t = ⟨ W , X i t ⟩ F , {\displaystyle y_{i}^{t}=\left\langle W,X_{i}^{t}\right\rangle _{F},} where the inner product is the Frobenius inner product. For different applications the matrices X i {\displaystyle X_{i}} will have different forms, but for each of these the optimization problem to infer W {\displaystyle W} can be written as min W ∈ H E ( W ) + R ( W ) , {\displaystyle \min _{W\in {\mathcal {H}}}E(W)+R(W),} where E {\displaystyle E} defines the empirical error for a given W {\displaystyle W} , and R ( W ) {\displaystyle R(W)} is a matrix regularization penalty. The function R ( W ) {\displaystyle R(W)} is typically chosen to be convex and is often selected to enforce sparsity (using ℓ 1 {\displaystyle \ell ^{1}} -norms) and/or smoothness (using ℓ 2 {\displaystyle \ell ^{2}} -norms). Finally, W {\displaystyle W} is in the space of matrices H {\displaystyle {\mathcal {H}}} with Frobenius inner product ⟨ … ⟩ F {\displaystyle \langle \dots \rangle _{F}} . == General applications == === Matrix completion === In the problem of matrix completion, the matrix X i t {\displaystyle X_{i}^{t}} takes the form X i t = e t ⊗ e i ′ , {\displaystyle X_{i}^{t}=e_{t}\otimes e_{i}',} where ( e t ) t {\displaystyle (e_{t})_{t}} and ( e i ′ ) i {\displaystyle (e_{i}')_{i}} are the canonical basis in R T {\displaystyle \mathbb {R} ^{T}} and R D {\displaystyle \mathbb {R} ^{D}} . In this case the role of the Frobenius inner product is to select individual elements w i t {\displaystyle w_{i}^{t}} from the matrix W {\displaystyle W} . Thus, the output y {\displaystyle y} is a sampling of entries from the matrix W {\displaystyle W} . The problem of reconstructing W {\displaystyle W} from a small set of sampled entries is possible only under certain restrictions on the matrix, and these restrictions can be enforced by a regularization function. For example, it might be assumed that W {\displaystyle W} is low-rank, in which case the regularization penalty can take the form of a nuclear norm. R ( W ) = λ ‖ W ‖ ∗ = λ ∑ i | σ i | , {\displaystyle R(W)=\lambda \left\|W\right\|_{}=\lambda \sum _{i}\left|\sigma _{i}\right|,} where σ i {\displaystyle \sigma _{i}} , with i {\displaystyle i} from 1 {\displaystyle 1} to min D , T {\displaystyle \min D,T} , are the singular values of W {\displaystyle W} . === Multivariate regression === Models used in multivariate regression are parameterized by a matrix of coefficients. In the Frobenius inner product above, each matrix X {\displaystyle X} is X i t = e t ⊗ x i {\displaystyle X_{i}^{t}=e_{t}\otimes x_{i}} such that the output of the inner product is the dot product of one row of the input with one column of the coefficient matrix. The familiar form of such models is Y = X W + b {\displaystyle Y=XW+b} Many of the vector norms used in single variable regression can be extended to the multivariate case. One example is the squared Frobenius norm, which can be viewed as an ℓ 2 {\displaystyle \ell ^{2}} -norm acting either entrywise, or on the singular values of the matrix: R ( W ) = λ ‖ W ‖ F 2 = λ ∑ i ∑ j | w i j | 2 = λ Tr ⁡ ( W ∗ W ) = λ ∑ i σ i 2 . {\displaystyle R(W)=\lambda \left\|W\right\|_{F}^{2}=\lambda \sum _{i}\sum _{j}\left|w_{ij}\right|^{2}=\lambda \operatorname {Tr} \left(W^{}W\right)=\lambda \sum _{i}\sigma _{i}^{2}.} In the multivariate case the effect of regularizing with the Frobenius norm is the same as the vector case; very complex models will have larger norms, and, thus, will be penalized more. === Multi-task learning === The setup for multi-task learning is almost the same as the setup for multivariate regression. The primary difference is that the input variables are also indexed by task (columns of Y {\displaystyle Y} ). The representation with the Frobenius inner product is then X i t = e t ⊗ x i t . {\displaystyle X_{i}^{t}=e_{t}\otimes x_{i}^{t}.} The role of matrix regularization in this setting can be the same as in multivariate regression, but matrix norms can also be used to couple learning problems across tasks. In particular, note that for the optimization problem min W ‖ X W − Y ‖ 2 2 + λ ‖ W ‖ 2 2 {\displaystyle \min _{W}\left\|XW-Y\right\|_{2}^{2}+\lambda \left\|W\right\|_{2}^{2}} the solutions corresponding to each column of Y {\displaystyle Y} are decoupled. That is, the same solution can be found by solving the joint problem, or by solving an isolated regression problem for each column. The problems can be coupled by adding an additional regularization penalty on the covariance of solutions min W , Ω ‖ X W − Y ‖ 2 2 + λ 1 ‖ W ‖ 2 2 + λ 2 Tr ⁡ ( W T Ω − 1 W ) {\displaystyle \min _{W,\Omega }\left\|XW-Y\right\|_{2}^{2}+\lambda _{1}\left\|W\right\|_{2}^{2}+\lambda _{2}\operatorname {Tr} \left(W^{T}\Omega ^{-1}W\right)} where Ω {\displaystyle \Omega } models the relationship between tasks. This scheme can be used to both enforce similarity of solutions across tasks, and to learn the specific structure of task similarity by alternating between optimizations of W {\displaystyle W} and Ω {\displaystyle \Omega } . When the relationship between tasks is known to lie on a graph, the Laplacian matrix of the graph can be used to couple the learning problems. == Spectral regularization == Regularization by spectral filtering has been used to find stable solutions to problems such as those discussed above by addressing ill-posed matrix inversions (see for example Filter function for Tikhonov regularization). In many cases the regularization function acts on the input (or kernel) to ensure a bounded inverse by eliminating small singular values, but it can also be useful to have spectral norms that act on the matrix that is to be learned. There are a number of matrix norms that act on the singular values of the matrix. Frequently used examples include the Schatten p-norms, with p = 1 or 2. For example, matrix regularization with a Schatten 1-norm, also called the nuclear norm, can be used to enforce sparsity in the spectrum of a matrix. This has been used in the context of matrix completion when the matrix in question is believed to have a restricted rank. In this case the optimization problem becomes: min ‖ W ‖ ∗ subject to W i , j = Y i j . {\displaystyle \min \left\|W\right\|_{}~~{\text{ subject to }}~~W_{i,j}=Y_{ij}.} Spectral Regularization is also used to enforce a reduced rank coefficient matrix in multivariate regression. In this setting, a reduced rank coefficient matrix can be found by keeping just the top n {\displaystyle n} singular values, but this can be extended to keep any reduced set of singular values and vectors. == Structured sparsity == Sparse optimization has become the focus of much research interest as a way to find solutions that depend on a small number of variables (see e.g. the Lasso method). In principle, entry-wise sparsity can be enforced by penalizing the entry-wise ℓ 0 {\displaystyle \ell ^{0}} -norm of the matrix, but the ℓ 0 {\displaystyle \ell ^{0}} -norm is not convex. In practice this can be implemented by convex relaxation to the ℓ 1 {\displaystyle \ell ^{1}} -norm. While entry-wise regularization with an ℓ 1 {\displaystyle \ell ^{1}} -norm will find solutions with a small number of nonzero elements, applying an ℓ 1 {

  Read more →
• 

  Lazy learning

  (Not to be confused with the lazy learning regime, see Neural tangent kernel). In machine learning, lazy learning is a learning method in which generalization of the training data is, in theory, delayed until a query is made to the system, as opposed to eager learning, where the system tries to generalize the training data before receiving queries. The primary motivation for employing lazy learning, as in the K-nearest neighbors algorithm, used by online recommendation systems ("people who viewed/purchased/listened to this movie/item/tune also ...") is that the data set is continuously updated with new entries (e.g., new items for sale at Amazon, new movies to view at Netflix, new clips at YouTube, new music at Spotify or Pandora). Because of the continuous update, the "training data" would be rendered obsolete in a relatively short time especially in areas like books and movies, where new best-sellers or hit movies/music are published/released continuously. Therefore, one cannot really talk of a "training phase". Lazy classifiers are most useful for large, continuously changing datasets with few attributes that are commonly queried. Specifically, even if a large set of attributes exist - for example, books have a year of publication, author/s, publisher, title, edition, ISBN, selling price, etc. - recommendation queries rely on far fewer attributes - e.g., purchase or viewing co-occurrence data, and user ratings of items purchased/viewed. == Advantages == The main advantage gained in employing a lazy learning method is that the target function will be approximated locally, such as in the k-nearest neighbor algorithm. Because the target function is approximated locally for each query to the system, lazy learning systems can simultaneously solve multiple problems and deal successfully with changes in the problem domain. At the same time they can reuse a lot of theoretical and applied results from linear regression modelling (notably PRESS statistic) and control. It is said that the advantage of this system is achieved if the predictions using a single training set are only developed for few objects. This can be demonstrated in the case of the k-NN technique, which is instance-based and function is only estimated locally. == Disadvantages == Theoretical disadvantages with lazy learning include: The large space requirement to store the entire training dataset. In practice, this is not an issue because of advances in hardware and the relatively small number of attributes (e.g., as co-occurrence frequency) that need to be stored. Particularly noisy training data increases the case base unnecessarily, because no abstraction is made during the training phase. In practice, as stated earlier, lazy learning is applied to situations where any learning performed in advance soon becomes obsolete because of changes in the data. Also, for the problems for which lazy learning is optimal, "noisy" data does not really occur - the purchaser of a book has either bought another book or hasn't. Lazy learning methods are usually slower to evaluate. In practice, for very large databases with high concurrency loads, the queries are not postponed until actual query time, but recomputed in advance on a periodic basis - e.g., nightly, in anticipation of future queries, and the answers stored. This way, the next time new queries are asked about existing entries in the database, the answers are merely looked up rapidly instead of having to be computed on the fly, which would almost certainly bring a high-concurrency multi-user system to its knees. Larger training data also entail increased cost. Particularly, there is the fixed amount of computational cost, where a processor can only process a limited amount of training data points. There are standard techniques to improve re-computation efficiency so that a particular answer is not recomputed unless the data that impact this answer has changed (e.g., new items, new purchases, new views). In other words, the stored answers are updated incrementally. This approach, used by large e-commerce or media sites, has long been used in the Entrez portal of the National Center for Biotechnology Information (NCBI) to precompute similarities between the different items in its large datasets: biological sequences, 3-D protein structures, published-article abstracts, etc. Because "find similar" queries are asked so frequently, the NCBI uses highly parallel hardware to perform nightly recomputation. The recomputation is performed only for new entries in the datasets against each other and against existing entries: the similarity between two existing entries need not be recomputed. == Examples of Lazy Learning Methods == K-nearest neighbors, which is a special case of instance-based learning. Local regression. Lazy naive Bayes rules, which are extensively used in commercial spam detection software. Here, the spammers keep getting smarter and revising their spamming strategies, and therefore the learning rules must also be continually updated.

  Read more →
• 

  Quantum machine learning

  Quantum machine learning (QML) is the study of quantum algorithms for machine learning. It often refers to quantum algorithms for machine learning tasks which analyze classical data, sometimes called quantum-enhanced machine learning. QML algorithms use qubits and quantum operations to try to improve the space and time complexity of classical machine learning algorithms. Hybrid QML methods involve both classical and quantum processing, where computationally difficult subroutines are outsourced to a quantum device. These routines can be more complex in nature and executed faster on a quantum computer. Furthermore, quantum algorithms can be used to analyze quantum states instead of classical data. The term "quantum machine learning" is sometimes used to refer classical machine learning methods applied to data generated from quantum experiments (i.e. machine learning of quantum systems), such as learning the phase transitions of a quantum system or creating new quantum experiments. QML also extends to a branch of research that explores methodological and structural similarities between certain physical systems and learning systems, in particular neural networks. For example, some mathematical and numerical techniques from quantum physics are applicable to classical deep learning and vice versa. Furthermore, researchers investigate more abstract notions of learning theory with respect to quantum information, sometimes referred to as "quantum learning theory". == Machine learning with quantum computers == Quantum-enhanced machine learning refers to quantum algorithms that solve tasks in machine learning, thereby improving and often expediting classical machine learning techniques. Such algorithms typically require one to encode the given classical data set into a quantum computer to make it accessible for quantum information processing. Subsequently, quantum information processing routines are applied and the result of the quantum computation is read out by measuring the quantum system. For example, the outcome of the measurement of a qubit reveals the result of a binary classification task. While many proposals of QML algorithms are still purely theoretical and require a full-scale universal quantum computer to be tested, others have been implemented on small-scale or special purpose quantum devices. === Quantum associative memories and quantum pattern recognition === Early work on quantum associative memories has been done by Dan Ventura and Tony Martinez and by Carlo A. Trugenberger in the late 1990s and early 2000s. Associative (or content-addressable) memories are able to recognize stored content on the basis of a similarity measure, while random access memories are accessed by the address of stored information and not its content. As such they must be able to retrieve both incomplete and corrupted patterns, the essential machine learning task of pattern recognition. Typical classical associative memories store p patterns in the O ( n 2 ) {\displaystyle O(n^{2})} interactions (synapses) of a real, symmetric energy matrix over a network of n artificial neurons. The encoding is such that the desired patterns are local minima of the energy functional and retrieval is done by minimizing the total energy, starting from an initial configuration. Unfortunately, classical associative memories are severely limited by the phenomenon of cross-talk. When too many patterns are stored, spurious memories appear which quickly proliferate, so that the energy landscape becomes disordered and no retrieval is anymore possible. The number of storable patterns is typically limited by a linear function of the number of neurons, p ≤ O ( n ) {\displaystyle p\leq O(n)} . Quantum associative memories (in their simplest realization) store patterns in a unitary matrix U acting on the Hilbert space of n qubits. Retrieval is realized by the unitary evolution of a fixed initial state to a quantum superposition of the desired patterns with probability distribution peaked on the most similar pattern to an input. By its very quantum nature, the retrieval process is thus probabilistic. Because quantum associative memories are free from cross-talk, however, spurious memories are never generated. Correspondingly, they have a superior capacity than classical ones. The number of parameters in the unitary matrix U is O ( p n ) {\displaystyle O(pn)} . One can thus have efficient, spurious-memory-free quantum associative memories for any polynomial number of patterns. If the matrix U is encoded as a unique operator (as opposed as to a sequence of gates as in the circuit model), e.g. by an optical interferometer, the retrieval becomes efficient even for an exponential number of patterns. === Linear algebra simulation with quantum amplitudes === A number of quantum algorithms for machine learning are based on the idea of amplitude encoding, that is, to associate the amplitudes of a quantum state with the inputs and outputs of computations. Since a state of n {\displaystyle n} qubits is described by 2 n {\displaystyle 2^{n}} complex amplitudes, this information encoding can allow for an exponentially compact representation. Intuitively, this corresponds to associating a discrete probability distribution over binary random variables with a classical vector. The goal of algorithms based on amplitude encoding is to formulate quantum algorithms whose resources grow polynomially in the number of qubits n {\displaystyle n} , which amounts to a logarithmic time complexity in the number of amplitudes and thereby the dimension of the input. Many QML algorithms in this category are based on variations of the quantum algorithm for linear systems of equations (colloquially called HHL, after the paper's authors) which, under specific conditions, performs a matrix inversion using an amount of physical resources growing only logarithmically in the dimensions of the matrix. One of these conditions is that a Hamiltonian which entry-wise corresponds to the matrix can be simulated efficiently, which is known to be possible if the matrix is sparse or low rank. For reference, any known classical algorithm for matrix inversion requires a number of operations that grows more than quadratically in the dimension of the matrix (e.g. O ( n 2.373 ) {\displaystyle O{\mathord {\left(n^{2.373}\right)}}} ), but they are not restricted to sparse matrices. Quantum matrix inversion can be applied to machine learning methods in which the training reduces to solving a linear system of equations, for example in least-squares linear regression, the least-squares version of support vector machines, and Gaussian processes. A crucial bottleneck of methods that simulate linear algebra computations with the amplitudes of quantum states is state preparation, which often requires one to initialise a quantum system in a state whose amplitudes reflect the features of the entire dataset. Although efficient methods for state preparation are known for specific cases, this step easily hides the complexity of the task. === Variational quantum algorithms (VQAs) === In a variational quantum algorithm, a classical computer optimizes the parameters used to prepare a quantum state, while a quantum computer is used to do the actual state preparation and measurement. VQAs are considered promising candidates for noisy intermediate-scale quantum computers. Variational quantum circuits (or parameterized quantum circuits) are a popular class of VQAs where the parameters are those used in a fixed quantum circuit. Researchers have studied VQCs to solve optimization problems and find the ground state energy of complex quantum systems, which were difficult to solve using a classical computer. === Quantum binary classifier === Pattern reorganization is one of the important tasks of machine learning, binary classification is one of the tools or algorithms to find patterns. Binary classification is used in supervised learning and in unsupervised learning. In QML, classical bits are converted to qubits and they are mapped to Hilbert space; complex value data are used in a quantum binary classifier to use the advantage of Hilbert space. By exploiting the quantum mechanic properties such as superposition, entanglement, interference the quantum binary classifier produces the accurate result in short period of time. === Quantum machine learning algorithms based on Grover search === Another approach to improving classical machine learning with quantum information processing uses amplitude amplification methods based on Grover's search algorithm, which has been shown to solve unstructured search problems with a quadratic speedup compared to classical algorithms. These quantum routines can be employed for learning algorithms that translate into an unstructured search task, as can be done, for instance, in the case of the k-medians and the k-nearest neighbors algorithms. Other applications include quadratic speedups in the training of perceptrons. An e

  Read more →
• 

  Decision tree pruning

  Pruning is a data compression technique in machine learning and search algorithms that reduces the size of decision trees by removing sections of the tree that are non-critical and redundant to classify instances. Pruning reduces the complexity of the final classifier, and hence improves predictive accuracy by the reduction of overfitting. One of the questions that arises in a decision tree algorithm is the optimal size of the final tree. A tree that is too large risks overfitting the training data and poorly generalizing to new samples. A small tree might not capture important structural information about the sample space. However, it is hard to tell when a tree algorithm should stop because it is impossible to tell if the addition of a single extra node will dramatically decrease error. This problem is known as the horizon effect. A common strategy is to grow the tree until each node contains a small number of instances then use pruning to remove nodes that do not provide additional information. Pruning should reduce the size of a learning tree without reducing predictive accuracy as measured by a cross-validation set. There are many techniques for tree pruning that differ in the measurement that is used to optimize performance. == Techniques == Pruning processes can be divided into two types (pre- and post-pruning). Pre-pruning procedures prevent a complete induction of the training set by replacing a stop () criterion in the induction algorithm (e.g. max. Tree depth or information gain (Attr)> minGain). Pre-pruning methods are considered to be more efficient because they do not induce an entire set, but rather trees remain small from the start. Prepruning methods share a common problem, the horizon effect. This is to be understood as the undesired premature termination of the induction by the stop () criterion. Post-pruning (or just pruning) is the most common way of simplifying trees. Here, nodes and subtrees are replaced with leaves to reduce complexity. Pruning can not only significantly reduce the size but also improve the classification accuracy of unseen objects. It may be the case that the accuracy of the assignment on the train set deteriorates, but the accuracy of the classification properties of the tree increases overall. The procedures are differentiated on the basis of their approach in the tree (top-down or bottom-up). === Bottom-up pruning === These procedures start at the last node in the tree (the lowest point). Following recursively upwards, they determine the relevance of each individual node. If the relevance for the classification is not given, the node is dropped or replaced by a leaf. The advantage is that no relevant sub-trees can be lost with this method. These methods include Reduced Error Pruning (REP), Minimum Cost Complexity Pruning (MCCP), or Minimum Error Pruning (MEP). === Top-down pruning === In contrast to the bottom-up method, this method starts at the root of the tree. Following the structure below, a relevance check is carried out which decides whether a node is relevant for the classification of all n items or not. By pruning the tree at an inner node, it can happen that an entire sub-tree (regardless of its relevance) is dropped. One of these representatives is pessimistic error pruning (PEP), which brings quite good results with unseen items. == Pruning algorithms == === Reduced error pruning === One of the simplest forms of pruning is reduced error pruning. Starting at the leaves, each node is replaced with its most popular class. If the prediction accuracy is not affected then the change is kept. While somewhat naive, reduced error pruning has the advantage of simplicity and speed. === Cost complexity pruning === Cost complexity pruning generates a series of trees ⁠ T 0 … T m {\displaystyle T_{0}\dots T_{m}} ⁠ where ⁠ T 0 {\displaystyle T_{0}} ⁠ is the initial tree and ⁠ T m {\displaystyle T_{m}} ⁠ is the root alone. At step ⁠ i {\displaystyle i} ⁠, the tree is created by removing a subtree from tree ⁠ i − 1 {\displaystyle i-1} ⁠ and replacing it with a leaf node with value chosen as in the tree building algorithm. The subtree that is removed is chosen as follows: Define the error rate of tree ⁠ T {\displaystyle T} ⁠ over data set ⁠ S {\displaystyle S} ⁠ as ⁠ err ⁡ ( T , S ) {\displaystyle \operatorname {err} (T,S)} ⁠. The subtree t {\displaystyle t} that minimizes err ⁡ ( prune ⁡ ( T , t ) , S ) − err ⁡ ( T , S ) | leaves ⁡ ( T ) | − | leaves ⁡ ( prune ⁡ ( T , t ) ) | {\displaystyle {\frac {\operatorname {err} (\operatorname {prune} (T,t),S)-\operatorname {err} (T,S)}{\left\vert \operatorname {leaves} (T)\right\vert -\left\vert \operatorname {leaves} (\operatorname {prune} (T,t))\right\vert }}} is chosen for removal. The function ⁠ prune ⁡ ( T , t ) {\displaystyle \operatorname {prune} (T,t)} ⁠ defines the tree obtained by pruning the subtrees ⁠ t {\displaystyle t} ⁠ from the tree ⁠ T {\displaystyle T} ⁠. Once the series of trees has been created, the best tree is chosen by generalized accuracy as measured by a training set or cross-validation. == Examples == Pruning could be applied in a compression scheme of a learning algorithm to remove the redundant details without compromising the model's performances. In neural networks, pruning removes entire neurons or layers of neurons.

  Read more →
• 

  Level set (data structures)

  In computer science, a level set is a data structure designed to represent discretely sampled dynamic level sets of functions. A common use of this form of data structure is in efficient image rendering. The underlying method constructs a signed distance field that extends from the boundary, and can be used to solve the motion of the boundary in this field. == Chronological developments == The powerful level-set method is due to Osher and Sethian 1988. However, the straightforward implementation via a dense d-dimensional array of values, results in both time and storage complexity of O ( n d ) {\displaystyle O(n^{d})} , where n {\displaystyle n} is the cross sectional resolution of the spatial extents of the domain and d {\displaystyle d} is the number of spatial dimensions of the domain. === Narrow band === The narrow band level set method, introduced in 1995 by Adalsteinsson and Sethian, restricted most computations to a thin band of active voxels immediately surrounding the interface, thus reducing the time complexity in three dimensions to O ( n 2 ) {\displaystyle O(n^{2})} for most operations. Periodic updates of the narrowband structure, to rebuild the list of active voxels, were required which entailed an O ( n 3 ) {\displaystyle O(n^{3})} operation in which voxels over the entire volume were accessed. The storage complexity for this narrowband scheme was still O ( n 3 ) . {\displaystyle O(n^{3}).} Differential constructions over the narrow band domain edge require careful interpolation and domain alteration schemes to stabilise the solution. === Sparse field === This O ( n 3 ) {\displaystyle O(n^{3})} time complexity was eliminated in the approximate "sparse field" level set method introduced by Whitaker in 1998. The sparse field level set method employs a set of linked lists to track the active voxels around the interface. This allows incremental extension of the active region as needed without incurring any significant overhead. While consistently O ( n 2 ) {\displaystyle O(n^{2})} efficient in time, O ( n 3 ) {\displaystyle O(n^{3})} storage space is still required by the sparse field level set method. See for implementation details. === Sparse block grid === The sparse block grid method, introduced by Bridson in 2003, divides the entire bounding volume of size n 3 {\displaystyle n^{3}} into small cubic blocks of m 3 {\displaystyle m^{3}} voxels each. A coarse grid of size ( n / m ) 3 {\displaystyle (n/m)^{3}} then stores pointers only to those blocks that intersect the narrow band of the level set. Block allocation and deallocation occur as the surface propagates to accommodate to the deformations. This method has a suboptimal storage complexity of O ( ( n m ) 3 + m 3 n 2 ) {\displaystyle O\left((nm)3+m^{3}n^{2}\right)} , but retains the constant time access inherent to dense grids. === Octree === The octree level set method, introduced by Strain in 1999 and refined by Losasso, Gibou and Fedkiw, and more recently by Min and Gibou uses a tree of nested cubes of which the leaf nodes contain signed distance values. Octree level sets currently require uniform refinement along the interface (i.e. the narrow band) in order to obtain sufficient precision. This representation is efficient in terms of storage, O ( n 2 ) , {\displaystyle O(n^{2}),} and relatively efficient in terms of access queries, O ( log n ) . {\displaystyle O(\log \,n).} An advantage of the level method on octree data structures is that one can solve the partial differential equations associated with typical free boundary problems that use the level set method. The CASL research group has developed this line of work in computational materials, computational fluid dynamics, electrokinetics, image-guided surgery and controls. === Run-length encoded === The run-length encoding (RLE) level set method, introduced in 2004, applies the RLE scheme to compress regions away from the narrow band to just their sign representation while storing with full precision the narrow band. The sequential traversal of the narrow band is optimal and storage efficiency is further improved over the octree level set. The addition of an acceleration lookup table allows for fast O ( log ⁡ r ) {\displaystyle O(\log r)} random access, where r is the number of runs per cross section. Additional efficiency is gained by applying the RLE scheme in a dimensional recursive fashion, a technique introduced by Nielsen & Museth's similar DT-Grid. === Hash Table Local Level Set === The Hash Table Local Level Set method was introduced in 2011 by Eyiyurekli and Breen and extended in 2012 by Brun, Guittet, and Gibou, only computes the level set data in a band around the interface, as in the Narrow Band Level-Set Method, but also only stores the data in that same band. A hash table data structure is used, which provides an O ( 1 ) {\displaystyle O(1)} access to the data. However, Brun et al. conclude that their method, while being easier to implement, performs worse than a quadtree implementation. They find that as it is, [...] a quadtree data structure seems more adapted than the hash table data structure for level-set algorithms. Three main reasons for worse efficiency are listed: to obtain accurate results, a rather large band is required close to the interface, which counterbalances the absence of grid nodes far from the interface; the performances are deteriorated by extrapolation procedures on the outer edges of the local grid and the width of the band restricts the time step and slows down the method. === Point-based === Corbett in 2005 introduced the point-based level set method. Instead of using a uniform sampling of the level set, the continuous level set function is reconstructed from a set of unorganized point samples via moving least squares.

  Read more →
• 

  AI Mode

  AI Mode is a search feature used within Google Search. In March 2025, Google introduced an experimental "AI Mode" within its search platform, enabling users to input complex, multi-part queries and receive comprehensive, AI-generated responses. This feature uses Google's Gemini model, which enhances the system's reasoning capabilities and supports multimodal inputs, including text, images, and voice. Users need to be signed in to be able to use the image generation features. Initially, AI Mode was available to Google One AI Premium subscribers in the United States, who could access it through the Search Labs platform. This phased rollout allowed Google to gather user feedback and refine the feature before a broader release.

  Read more →
• 

  Computer audition

  Computer audition (CA) or machine listening is the general field of study of algorithms and systems for audio interpretation by machines. Since the notion of what it means for a machine to "hear" is very broad and somewhat vague, computer audition attempts to bring together several disciplines that originally dealt with specific problems or had a concrete application in mind. The engineer Paris Smaragdis, interviewed in Technology Review, talks about these systems — "software that uses sound to locate people moving through rooms, monitor machinery for impending breakdowns, or activate traffic cameras to record accidents." Inspired by models of human audition, CA deals with questions of representation, transduction, grouping, use of musical knowledge and general sound semantics for the purpose of performing intelligent operations on audio and music signals by the computer. Technically this requires a combination of methods from the fields of signal processing, auditory modelling, music perception and cognition, pattern recognition, and machine learning, as well as more traditional methods of artificial intelligence for musical knowledge representation. == Applications == Like computer vision versus image processing, computer audition versus audio engineering deals with understanding of audio rather than processing. It also differs from problems of speech understanding by machine since it deals with general audio signals, such as natural sounds and musical recordings. Applications of computer audition are widely varying, and include search for sounds, genre recognition, acoustic monitoring, music transcription, score following, audio texture, music improvisation, emotion in audio and so on. == Related disciplines == Computer Audition overlaps with the following disciplines: Music information retrieval: methods for search and analysis of similarity between music signals. Auditory scene analysis: understanding and description of audio sources and events. Computational musicology and mathematical music theory: use of algorithms that employ musical knowledge for analysis of music data. Computer music: use of computers in creative musical applications. Machine musicianship: audition driven interactive music systems. == Areas of study == Since audio signals are interpreted by the human ear–brain system, that complex perceptual mechanism should be simulated somehow in software for "machine listening". In other words, to perform on par with humans, the computer should hear and understand audio content much as humans do. Analyzing audio accurately involves several fields: electrical engineering (spectrum analysis, filtering, and audio transforms); artificial intelligence (machine learning and sound classification); psychoacoustics (sound perception); cognitive sciences (neuroscience and artificial intelligence); acoustics (physics of sound production); and music (harmony, rhythm, and timbre). Furthermore, audio transformations such as pitch shifting, time stretching, and sound object filtering, should be perceptually and musically meaningful. For best results, these transformations require perceptual understanding of spectral models, high-level feature extraction, and sound analysis/synthesis. Finally, structuring and coding the content of an audio file (sound and metadata) could benefit from efficient compression schemes, which discard inaudible information in the sound. Computational models of music and sound perception and cognition can lead to a more meaningful representation, a more intuitive digital manipulation and generation of sound and music in musical human-machine interfaces. The study of CA could be roughly divided into the following sub-problems: Representation: signal and symbolic. This aspect deals with time-frequency representations, both in terms of notes and spectral models, including pattern playback and audio texture. Feature extraction: sound descriptors, segmentation, onset, pitch and envelope detection, chroma, and auditory representations. Musical knowledge structures: analysis of tonality, rhythm, and harmonies. Sound similarity: methods for comparison between sounds, sound identification, novelty detection, segmentation, and clustering. Sequence modeling: matching and alignment between signals and note sequences. Source separation: methods of grouping of simultaneous sounds, such as multiple pitch detection and time-frequency clustering methods. Auditory cognition: modeling of emotions, anticipation and familiarity, auditory surprise, and analysis of musical structure. Multi-modal analysis: finding correspondences between textual, visual, and audio signals. === Representation issues === Computer audition deals with audio signals that can be represented in a variety of fashions, from direct encoding of digital audio in two or more channels to symbolically represented synthesis instructions. Audio signals are usually represented in terms of analogue or digital recordings. Digital recordings are samples of acoustic waveform or parameters of audio compression algorithms. One of the unique properties of musical signals is that they often combine different types of representations, such as graphical scores and sequences of performance actions that are encoded as MIDI files. Since audio signals usually comprise multiple sound sources, then unlike speech signals that can be efficiently described in terms of specific models (such as source-filter model), it is hard to devise a parametric representation for general audio. Parametric audio representations usually use filter banks or sinusoidal models to capture multiple sound parameters, sometimes increasing the representation size in order to capture internal structure in the signal. Additional types of data that are relevant for computer audition are textual descriptions of audio contents, such as annotations, reviews, and visual information in the case of audio-visual recordings. === Features === Description of contents of general audio signals usually requires extraction of features that capture specific aspects of the audio signal. Generally speaking, one could divide the features into signal or mathematical descriptors such as energy, description of spectral shape etc., statistical characterization such as change or novelty detection, special representations that are better adapted to the nature of musical signals or the auditory system, such as logarithmic growth of sensitivity (bandwidth) in frequency or octave invariance (chroma). Since parametric models in audio usually require very many parameters, the features are used to summarize properties of multiple parameters in a more compact or salient representation. === Musical knowledge === Finding specific musical structures is possible by using musical knowledge as well as supervised and unsupervised machine learning methods. Examples of this include detection of tonality according to distribution of frequencies that correspond to patterns of occurrence of notes in musical scales, distribution of note onset times for detection of beat structure, distribution of energies in different frequencies to detect musical chords and so on. === Sound similarity and sequence modeling === Comparison of sounds can be done by comparison of features with or without reference to time. In some cases an overall similarity can be assessed by close values of features between two sounds. In other cases when temporal structure is important, methods of dynamic time warping need to be applied to "correct" for different temporal scales of acoustic events. Finding repetitions and similar sub-sequences of sonic events is important for tasks such as texture synthesis and machine improvisation. === Source separation === Since one of the basic characteristics of general audio is that it comprises multiple simultaneously sounding sources, such as multiple musical instruments, people talking, machine noises or animal vocalization, the ability to identify and separate individual sources is very desirable. Unfortunately, there are no methods that can solve this problem in a robust fashion. Existing methods of source separation rely sometimes on correlation between different audio channels in multi-channel recordings. The ability to separate sources from stereo signals requires different techniques than those usually applied in communications where multiple sensors are available. Other source separation methods rely on training or clustering of features in mono recording, such as tracking harmonically related partials for multiple pitch detection. Some methods, before explicit recognition, rely on revealing structures in data without knowing the structures (like recognizing objects in abstract pictures without attributing them meaningful labels) by finding the least complex data representations, for instance describing audio scenes as generated by a few tone patterns and their trajectories (polyphonic voices) and acoustical contours drawn by a tone (c

  Read more →