AI Face Upgrade

AI Face Upgrade — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

MyRadar

MyRadar is a free weather forecasting application developed by Andy Green and his Orlando, Florida-based company ACME AtronOmatic (ACME). The app began operations in 2008 and ran on government-provided weather and radar data for its first decade. In 2019, ACME launched personal satellites to improve predictions of ongoing weather. The app received funding to improve its radar and imaging from the Federal Communications Commission (FCC), National Oceanic and Atmospheric Administration (NOAA), and the Office of Naval Research (ONR). ACME created a weather data satellite constellation named "Hyperspectral Orbital Remote Imaging Spectrometer" (HORIS), which utilizes machine learning and artificial intelligence (AI) to create a current weather map. With the introduction of additional features, including the detection of wildfires and illegal fishing, the app has more broadly become an environmental intelligence app since 2022. In 2024, the app partnered with the Total Traffic and Weather Network (TTWN) to provide traffic flow and incident data for users with paying subscriptions via CarPlay and Android Auto. == History == The app's creator, Andy Green, had created internet tech since the 1980s. His first major project was the development of a public access internet service company based in Rhode Island, which he later sold to finance the creation of ACME AtronOmatic ("ACME" for short), based in Orlando, Florida. The first major app created by ACME was called "Flightwise", which provided users with flight tracking information. In summer 2008, Green had the idea to use the animated location tracker already built-in to Flightwise to make a stand-alone weather forecasting app after wondering if a meal he was eating outdoors would get rained out. MyRadar was launched in 2012 out of an office in Orlando. Despite running solely off of free government-provided weather and radar data for the first decade after launch, Green said the app "took off like wildfire" in downloads. In December 2017, the app partnered with "TripIt" to provide users with information about flight delays and gate changes, eliminating the need for a separate app like Flightwise. In 2019, ACME launched their first personal satellite for the app, a small prototype from New Zealand, as part of an effort to provide detailed imagery and improved predictions of ongoing weather unique to the app. More satellites were eventually launched by ACME to create a weather data satellite constellation named "Hyperspectral Orbital Remote Imaging Spectrometer" (HORIS), monitored by ground stations maintained by Kongsberg Satellite Services. HORIS operates MyRadar by taking the environmental data and imagery it collects and pairing it with machine learning and artificial intelligence (AI) to create a real-time weather map. In 2022, HORIS was expanded upon after ACME won approval from the Federal Communications Commission (FCC) to improve their satellite constellation to include 250 satellites or more. The main batch of satellites were PocketQubes, which entered the atmosphere on May 2, 2022, by Rocket Lab Electron launched from New Zealand, with the additional purpose to test and validate the existing satellites in orbit. In October 2022, ACME received a US$150,000 Small Business Innovation Research (SBIR) grant from the National Oceanic and Atmospheric Administration (NOAA) to improve the app's wildfire detection and air quality measurement technology to better detect smoke, aerosols, fire hotspots using satellites and aerial drones. On August 18, 2023, phase two of the NOAA grant was approved, providing an additional US$650,000 to aid in the app's aforementioned goals by launching a pair of CubeSat satellites to provide high-definition infrared imagery. On September 8, 2023, ACME secured another US$1,200,000 in crowd funding to aid accomplishing the goals of the NOAA grant by expanding the app's workforce from 35 to 100 employees by the end of 2024. In January 2024, MyRadar partnered with Total Traffic and Weather Network (TTWN) to provide traffic data overlaid with its pre-existing weather graphics for users in the United States. The partnership allowed for the app to additionally become a tool for navigation. This officially became a feature days later on January 8, 2024, when the app was made compatible with Apple's CarPlay. On February 7, 2024, the Android equivalent Android Auto also gained the ability to display the app on car interfaces. In March 2024, the app launched a "meteorological wedding planning service" in the United States and Canada for prices between US$1,000 and US$5,000, in which users can request a personal meteorologist to provide an in-person meeting about the best dates for a wedding, and on-call local weather updates the day of. Scheduled for February 2025, four more satellites to help with the NOAA-sponsored wildfire detection are to be launched, and the first by ACME to have AI processing in the satellites themself and not computers on the ground, allowing for quicker transfer of information. == Features and general information == The app's primary function is to provide weather forecasting and prediction to users. The app includes toggleable options to track and send alerts to users for rain, wind patterns, earthquakes, tornadoes, tropical cyclones, wildfires, and more. In early 2020, a feature was added to track orbital objects such as the International Space Station. In May 2022, with the imagery improvement of HORIS, the app gained the secondary abilities to better monitor algae blooms, coral reefs, illegal fishing, and wildfires. In January and February 2024, the ability to display traffic flow and incident data in a feature called "RouteCast" was added, and can be displayed in video and 3D options via CarPlay and Android Auto for users with paying subscriptions. The app also provides annual tropical storm and tornado outlooks for their respective seasons, gathered through satellite and aerial drone data, as well as through on the ground storm chasers.
Read more →
Hugging Face

Hugging Face, Inc., is an American company based in New York City that develops computation tools for building applications using machine learning. Its transformers library built for natural language processing applications and its platform allow users to share machine learning models and datasets and showcase their work. == History == === Founding === The company was founded in 2016 by French entrepreneurs Clément Delangue, Julien Chaumond, and Thomas Wolf in New York City, originally as a company that developed a chatbot app targeted at teenagers. The company was named after the U+1F917 🤗 HUGGING FACE emoji. After open sourcing the model behind the chatbot, the company pivoted to focus on being a platform for machine learning. === AI boom === On April 28, 2021, the company launched the BigScience Research Workshop in collaboration with several other research groups to release an open large language model. In 2022, the workshop concluded with the announcement of BLOOM, a multilingual large language model with 176 billion parameters. In February 2023, the company announced partnership with Amazon Web Services (AWS) which would allow Hugging Face's products to be available to AWS customers to use them as the building blocks for their custom applications. The company also said the next generation of BLOOM will be run on Trainium, a proprietary machine learning chip created by AWS. In June 2024, the company announced, along with Meta and Scaleway, their launch of a new AI accelerator program for European startups. The initiative aimed to help startups integrate open foundation models into their products, accelerating the EU AI ecosystem. The program, based at STATION F in Paris, ran from September 2024 to February 2025. Selected startups received mentoring, and access to AI models and tools and Scaleway's computing power. On September 23, 2024, to further the International Decade of Indigenous Languages, Hugging Face teamed up with Meta and UNESCO to launch a new online language translator. It was built on Meta's No Language Left Behind open-source AI model, enabling free text translation across 200 languages, including many low-resource languages. In April 2025, Hugging Face announced that they acquired a humanoid robotics startup, Pollen Robotics, based in France and founded by Matthieu Lapeyre and Pierre Rouanet in 2016. In an X tweet, Delangue shared his vision to "make Artificial Intelligence robotics Open Source". === Cyberattacks === In early 2026, hackers hijacked the Hugging Face platform to launch Android-targeted attacks involving "powerful malware" which could completely take over a compromised target.
Read more →
Spatial embedding

Spatial embedding is one of feature learning techniques used in spatial analysis where points, lines, polygons or other spatial data types. representing geographic locations are mapped to vectors of real numbers. Conceptually it involves a mathematical embedding from a space with many dimensions per geographic object to a continuous vector space with a much lower dimension. Such embedding methods allow complex spatial data to be used in neural networks and have been shown to improve performance in spatial analysis tasks == Embedded data types == Geographic data can take many forms: text, images, graphs, trajectories, polygons. Depending on the task, there may be a need to combine multimodal data from different sources. The next section describes examples of different types of data and their uses. === Text === Geolocated posts on social media can be used to acquire a library of documents bound to a given place that can be later transformed to embedded vectors using word embedding techniques. === Image === Satellites and aircraft collect digital spatial data acquired from remotely sensed images which can be used in machine learning. They are sometimes hard to analyse using basic image analysis methods and convolutional neural networks can be used to acquire an embedding of images bound to a given geographical object or a region. === Point === A single point of interest (POI) can be assigned multiple features that can be used in machine learning. These could be demographic, transportation, meteorological, or economic data, for example. When embedding single points, it is common to consider the entire set of available points as nodes in a graph. === Line / multiline === Among other things, motion trajectories are represented as lines (multilines). Individual trajectories are embedded taking into account travel time, distances and also features of points visited along the way. Embedding of trajectories allows to improve performance of such tasks as clustering and also categorization. === Polygon === The geographic areas analyzed in machine learning are defined by both administrative boundaries and top-down division into grids of regular shapes such as rectangles, for example. Both types are represented as polygons and, like points, can be assigned different demographic, transportation, or economic features. A polygon can also have features related to the size of the area or shape it represents. === Graph === An example domain where graph representation is used is the street layout in a city, where vertices can be intersections and edges can be roads. The vertices can also be destination points like public transport stops or important points in the city, and the edges represent the flow between them. Embedding graphs or single vertices allows to improve accuracy of analysis methods in which the treated geographical domain can be represented as a network. == Usage == POI recommendation - generating personalized point of interest recommendations based on user preferences. Next/future location prediction - prediction of the next location a person will go to based on their historical trajectory. Zone functions classification - based on different mobility of people or POI distribution a function of a given area in a city can be predicted. Crime prediction - estimation of crime rate in different regions of a city. Local event detection - studying spatio-temporal changes in embeddings can provide valuable information in detection of local event occurring in specific location. Regional mobility popularity prediction - analysis of mobility can show patterns in popularity of different regions in a city. Shape matching - finding a similar shape of given polygon, for example finding building with the same shape as input building. Travel time estimation - predicting estimated travel time given current traffic conditions and special occurring events. Time estimation for on-demand food delivery - estimation of delivery time when placing an order through the website. == Temporal aspect == Some of the data analyzed has a timestamp associated with it. In some cases of data analysis this information is omitted and in others it is used to divide the set into groups. The most common division is the separation of weekdays from weekends or division into hours of the day. This is particularly important in the analysis of mobility data, because the characteristics of mobility during the week and at different times of the day are very different from each other. Another area in which time division into, for example, individual months can be used is in the analysis of tourism of a given region. In order to take such a split into account, embedding methods treat the time stamp specifically or separate versions of the model are developed for different subgroups of the analyzed set.
Read more →
Nouvelle AI

Nouvelle artificial intelligence (Nouvelle AI) is an approach to artificial intelligence pioneered in the 1980s by Rodney Brooks, who was then part of MIT artificial intelligence laboratory. Nouvelle AI differs from classical AI by aiming to produce robots with intelligence levels similar to insects. Researchers believe that intelligence can emerge organically from simple behaviors as these intelligences interacted with the "real world", instead of using the constructed worlds which symbolic AIs typically needed to have programmed into them. == Motivation == The differences between nouvelle AI and symbolic AI are apparent in early robots Shakey and Freddy. These robots contained an internal model (or "representation") of their micro-worlds consisting of symbolic descriptions. As a result, this structure of symbols had to be renewed as the robot moved or the world changed. Shakey's planning programs assessed the program structure and broke it down into the necessary steps to complete the desired action. This level of computation required a large amount time to process, so Shakey typically performed its tasks very slowly. Symbolic AI researchers had long been plagued by the problem of updating, searching, and otherwise manipulating the symbolic worlds inside their AIs. A nouvelle system refers continuously to its sensors rather than to an internal model of the world. It processes the external world information it needs from the senses when it is required. As Brooks puts it, "the world is its own best model--always exactly up to date and complete in every detail." A central idea of nouvelle AI is that simple behaviors combine to form more complex behaviors over time. For example, simple behaviors can include elements like "move forward" and "avoid obstacles." A robot using nouvelle AI with simple behaviors like collision avoidance and moving toward a moving object could possibly come together to produce a more complex behavior like chasing a moving object. === The frame problem === The frame problem describes an issue with using first-order logic (FOL) to express facts about a robot in the world. Representing the state of a robot with traditional FOL requires the use of many axioms (symbolic language) to imply that things about an environment do not change arbitrarily. Nouvelle AI seeks to sidestep the frame problem by dispensing with filling the AI or robot with volumes of symbolic language and instead letting more complex behaviors emerge by combining simpler behavioral elements. === Embodiment === The goal of traditional AI was to build intelligences without bodies, which would only have been able to interact with the world via keyboard, screen, or printer. However, nouvelle AI attempts to build embodied intelligence situated in the real world. Brooks quotes approvingly from the brief sketches that Turing gave in 1948 and 1950 of the "situated" approach. Turing wrote of equipping a machine "with the best sense organs that money can buy" and teaching it "to understand and speak English" by a process that would "follow the normal teaching of a child." This approach was contrasted to the others where they focused on abstract activities such as playing chess. == Brooks' robots == === Insectoid robots === Brooks focused on building robots that acted like simple insects while simultaneously working to remove some traditional AI characteristics. He created insect-like robots, named Allen and Herbert after cognitive science and AI pioneers Allen Newell and Herbert A. Simon. Brooks's insectoid robots contained no internal models of the world. Herbert, for example, discarded a high volume of the information received from its sensors and never stored information for more than two seconds. ==== Allen ==== Allen had a ring of twelve ultrasonic sonars as its primary sensors and three independent behavior-producing modules. These modules were programmed to avoid both stationary and moving objects. With only this module activated, Allen stayed in the middle of a room until an object approached and then it ran away while avoiding obstacles in its way. ==== Herbert ==== Herbert used infrared sensors to avoid obstacles and a laser system to collect 3D data over a distance of about 12 feet. Herbert also carried a number of simple sensors in its "hand." The robot's testing ground was the real world environment of the busy offices and workspaces of the MIT AI lab where it searched for empty soda cans and carried them away, a seemingly goal-oriented activity that emerged as a result of 15 simple behavior units combining. As a parallel, Simon noted that an ant's complicated path is due to the structure of its environment rather than the depth of its thought processes. ==== Other insectoid robots ==== Other robots by Brooks' team were Genghis and Squirt. Genghis had six legs and was able to walk over rough terrain and follow a human. Squirt's behavior modules had it stay in dark corners until it heard a noise, then it would begin to follow the source of the noise. Brooks agreed that the level of nouvelle AI had come near the complexity of a real insect, which raised a question about whether or not insect level-behavior was and is a reasonable goal for nouvelle AI. === Humanoid robots === Brooks' own recent work has taken the opposite direction to that proposed by Von Neumann in the quotations "theorists who select the human nervous system as their model are unrealistically picking 'the most complicated object under the sun,' and that there is little advantage in selecting instead the ant, since any nervous system at all exhibits exceptional complexity." ==== Cog ==== In the 1990s, Brooks decided to pursue the goal of human-level intelligence and, with Lynn Andrea Stein, built a humanoid robot called Cog. Cog is a robot with an extensive collection of sensors, a face, and arms (among other features) that allow it to interact with the world and gather information and experience so as to assemble intelligence organically in the manner described above by Turing. The team believed that Cog would be able to learn and able to find a correlation between the sensory information it received and its actions, and to learn common sense knowledge on its own. As of 2003, all development of the project had ceased.
Read more →
Puck App

Puck App is a mobile application that allows hockey players to quickly find and rent a hockey goalie. Founded in 2015 in Toronto, the application primarily operates throughout Canada. It is available on Apple's App Store and Google Play. == History == Puck App was founded in 2016 by Niki Sawni. Users can rate the goalies, message with available goalies, and coordinate skill levels. In 2017, Puck App expanded to Western Canada and has over 1,000 goalies registered. In 2018, Puck App charged approximately $40 CDN to rent a goalie with more than 2 hours notice. Previously, Puck App was a competitor to a similar application called GoalieUp. As of 2024, both companies have agreed to a merger deal.
Read more →
Decision tree pruning

Pruning is a data compression technique in machine learning and search algorithms that reduces the size of decision trees by removing sections of the tree that are non-critical and redundant to classify instances. Pruning reduces the complexity of the final classifier, and hence improves predictive accuracy by the reduction of overfitting. One of the questions that arises in a decision tree algorithm is the optimal size of the final tree. A tree that is too large risks overfitting the training data and poorly generalizing to new samples. A small tree might not capture important structural information about the sample space. However, it is hard to tell when a tree algorithm should stop because it is impossible to tell if the addition of a single extra node will dramatically decrease error. This problem is known as the horizon effect. A common strategy is to grow the tree until each node contains a small number of instances then use pruning to remove nodes that do not provide additional information. Pruning should reduce the size of a learning tree without reducing predictive accuracy as measured by a cross-validation set. There are many techniques for tree pruning that differ in the measurement that is used to optimize performance. == Techniques == Pruning processes can be divided into two types (pre- and post-pruning). Pre-pruning procedures prevent a complete induction of the training set by replacing a stop () criterion in the induction algorithm (e.g. max. Tree depth or information gain (Attr)> minGain). Pre-pruning methods are considered to be more efficient because they do not induce an entire set, but rather trees remain small from the start. Prepruning methods share a common problem, the horizon effect. This is to be understood as the undesired premature termination of the induction by the stop () criterion. Post-pruning (or just pruning) is the most common way of simplifying trees. Here, nodes and subtrees are replaced with leaves to reduce complexity. Pruning can not only significantly reduce the size but also improve the classification accuracy of unseen objects. It may be the case that the accuracy of the assignment on the train set deteriorates, but the accuracy of the classification properties of the tree increases overall. The procedures are differentiated on the basis of their approach in the tree (top-down or bottom-up). === Bottom-up pruning === These procedures start at the last node in the tree (the lowest point). Following recursively upwards, they determine the relevance of each individual node. If the relevance for the classification is not given, the node is dropped or replaced by a leaf. The advantage is that no relevant sub-trees can be lost with this method. These methods include Reduced Error Pruning (REP), Minimum Cost Complexity Pruning (MCCP), or Minimum Error Pruning (MEP). === Top-down pruning === In contrast to the bottom-up method, this method starts at the root of the tree. Following the structure below, a relevance check is carried out which decides whether a node is relevant for the classification of all n items or not. By pruning the tree at an inner node, it can happen that an entire sub-tree (regardless of its relevance) is dropped. One of these representatives is pessimistic error pruning (PEP), which brings quite good results with unseen items. == Pruning algorithms == === Reduced error pruning === One of the simplest forms of pruning is reduced error pruning. Starting at the leaves, each node is replaced with its most popular class. If the prediction accuracy is not affected then the change is kept. While somewhat naive, reduced error pruning has the advantage of simplicity and speed. === Cost complexity pruning === Cost complexity pruning generates a series of trees ⁠ T 0 … T m {\displaystyle T_{0}\dots T_{m}} ⁠ where ⁠ T 0 {\displaystyle T_{0}} ⁠ is the initial tree and ⁠ T m {\displaystyle T_{m}} ⁠ is the root alone. At step ⁠ i {\displaystyle i} ⁠, the tree is created by removing a subtree from tree ⁠ i − 1 {\displaystyle i-1} ⁠ and replacing it with a leaf node with value chosen as in the tree building algorithm. The subtree that is removed is chosen as follows: Define the error rate of tree ⁠ T {\displaystyle T} ⁠ over data set ⁠ S {\displaystyle S} ⁠ as ⁠ err ⁡ ( T , S ) {\displaystyle \operatorname {err} (T,S)} ⁠. The subtree t {\displaystyle t} that minimizes err ⁡ ( prune ⁡ ( T , t ) , S ) − err ⁡ ( T , S ) | leaves ⁡ ( T ) | − | leaves ⁡ ( prune ⁡ ( T , t ) ) | {\displaystyle {\frac {\operatorname {err} (\operatorname {prune} (T,t),S)-\operatorname {err} (T,S)}{\left\vert \operatorname {leaves} (T)\right\vert -\left\vert \operatorname {leaves} (\operatorname {prune} (T,t))\right\vert }}} is chosen for removal. The function ⁠ prune ⁡ ( T , t ) {\displaystyle \operatorname {prune} (T,t)} ⁠ defines the tree obtained by pruning the subtrees ⁠ t {\displaystyle t} ⁠ from the tree ⁠ T {\displaystyle T} ⁠. Once the series of trees has been created, the best tree is chosen by generalized accuracy as measured by a training set or cross-validation. == Examples == Pruning could be applied in a compression scheme of a learning algorithm to remove the redundant details without compromising the model's performances. In neural networks, pruning removes entire neurons or layers of neurons.
Read more →
Quantum machine learning

Quantum machine learning (QML) is the study of quantum algorithms for machine learning. It often refers to quantum algorithms for machine learning tasks which analyze classical data, sometimes called quantum-enhanced machine learning. QML algorithms use qubits and quantum operations to try to improve the space and time complexity of classical machine learning algorithms. Hybrid QML methods involve both classical and quantum processing, where computationally difficult subroutines are outsourced to a quantum device. These routines can be more complex in nature and executed faster on a quantum computer. Furthermore, quantum algorithms can be used to analyze quantum states instead of classical data. The term "quantum machine learning" is sometimes used to refer classical machine learning methods applied to data generated from quantum experiments (i.e. machine learning of quantum systems), such as learning the phase transitions of a quantum system or creating new quantum experiments. QML also extends to a branch of research that explores methodological and structural similarities between certain physical systems and learning systems, in particular neural networks. For example, some mathematical and numerical techniques from quantum physics are applicable to classical deep learning and vice versa. Furthermore, researchers investigate more abstract notions of learning theory with respect to quantum information, sometimes referred to as "quantum learning theory". == Machine learning with quantum computers == Quantum-enhanced machine learning refers to quantum algorithms that solve tasks in machine learning, thereby improving and often expediting classical machine learning techniques. Such algorithms typically require one to encode the given classical data set into a quantum computer to make it accessible for quantum information processing. Subsequently, quantum information processing routines are applied and the result of the quantum computation is read out by measuring the quantum system. For example, the outcome of the measurement of a qubit reveals the result of a binary classification task. While many proposals of QML algorithms are still purely theoretical and require a full-scale universal quantum computer to be tested, others have been implemented on small-scale or special purpose quantum devices. === Quantum associative memories and quantum pattern recognition === Early work on quantum associative memories has been done by Dan Ventura and Tony Martinez and by Carlo A. Trugenberger in the late 1990s and early 2000s. Associative (or content-addressable) memories are able to recognize stored content on the basis of a similarity measure, while random access memories are accessed by the address of stored information and not its content. As such they must be able to retrieve both incomplete and corrupted patterns, the essential machine learning task of pattern recognition. Typical classical associative memories store p patterns in the O ( n 2 ) {\displaystyle O(n^{2})} interactions (synapses) of a real, symmetric energy matrix over a network of n artificial neurons. The encoding is such that the desired patterns are local minima of the energy functional and retrieval is done by minimizing the total energy, starting from an initial configuration. Unfortunately, classical associative memories are severely limited by the phenomenon of cross-talk. When too many patterns are stored, spurious memories appear which quickly proliferate, so that the energy landscape becomes disordered and no retrieval is anymore possible. The number of storable patterns is typically limited by a linear function of the number of neurons, p ≤ O ( n ) {\displaystyle p\leq O(n)} . Quantum associative memories (in their simplest realization) store patterns in a unitary matrix U acting on the Hilbert space of n qubits. Retrieval is realized by the unitary evolution of a fixed initial state to a quantum superposition of the desired patterns with probability distribution peaked on the most similar pattern to an input. By its very quantum nature, the retrieval process is thus probabilistic. Because quantum associative memories are free from cross-talk, however, spurious memories are never generated. Correspondingly, they have a superior capacity than classical ones. The number of parameters in the unitary matrix U is O ( p n ) {\displaystyle O(pn)} . One can thus have efficient, spurious-memory-free quantum associative memories for any polynomial number of patterns. If the matrix U is encoded as a unique operator (as opposed as to a sequence of gates as in the circuit model), e.g. by an optical interferometer, the retrieval becomes efficient even for an exponential number of patterns. === Linear algebra simulation with quantum amplitudes === A number of quantum algorithms for machine learning are based on the idea of amplitude encoding, that is, to associate the amplitudes of a quantum state with the inputs and outputs of computations. Since a state of n {\displaystyle n} qubits is described by 2 n {\displaystyle 2^{n}} complex amplitudes, this information encoding can allow for an exponentially compact representation. Intuitively, this corresponds to associating a discrete probability distribution over binary random variables with a classical vector. The goal of algorithms based on amplitude encoding is to formulate quantum algorithms whose resources grow polynomially in the number of qubits n {\displaystyle n} , which amounts to a logarithmic time complexity in the number of amplitudes and thereby the dimension of the input. Many QML algorithms in this category are based on variations of the quantum algorithm for linear systems of equations (colloquially called HHL, after the paper's authors) which, under specific conditions, performs a matrix inversion using an amount of physical resources growing only logarithmically in the dimensions of the matrix. One of these conditions is that a Hamiltonian which entry-wise corresponds to the matrix can be simulated efficiently, which is known to be possible if the matrix is sparse or low rank. For reference, any known classical algorithm for matrix inversion requires a number of operations that grows more than quadratically in the dimension of the matrix (e.g. O ( n 2.373 ) {\displaystyle O{\mathord {\left(n^{2.373}\right)}}} ), but they are not restricted to sparse matrices. Quantum matrix inversion can be applied to machine learning methods in which the training reduces to solving a linear system of equations, for example in least-squares linear regression, the least-squares version of support vector machines, and Gaussian processes. A crucial bottleneck of methods that simulate linear algebra computations with the amplitudes of quantum states is state preparation, which often requires one to initialise a quantum system in a state whose amplitudes reflect the features of the entire dataset. Although efficient methods for state preparation are known for specific cases, this step easily hides the complexity of the task. === Variational quantum algorithms (VQAs) === In a variational quantum algorithm, a classical computer optimizes the parameters used to prepare a quantum state, while a quantum computer is used to do the actual state preparation and measurement. VQAs are considered promising candidates for noisy intermediate-scale quantum computers. Variational quantum circuits (or parameterized quantum circuits) are a popular class of VQAs where the parameters are those used in a fixed quantum circuit. Researchers have studied VQCs to solve optimization problems and find the ground state energy of complex quantum systems, which were difficult to solve using a classical computer. === Quantum binary classifier === Pattern reorganization is one of the important tasks of machine learning, binary classification is one of the tools or algorithms to find patterns. Binary classification is used in supervised learning and in unsupervised learning. In QML, classical bits are converted to qubits and they are mapped to Hilbert space; complex value data are used in a quantum binary classifier to use the advantage of Hilbert space. By exploiting the quantum mechanic properties such as superposition, entanglement, interference the quantum binary classifier produces the accurate result in short period of time. === Quantum machine learning algorithms based on Grover search === Another approach to improving classical machine learning with quantum information processing uses amplitude amplification methods based on Grover's search algorithm, which has been shown to solve unstructured search problems with a quadratic speedup compared to classical algorithms. These quantum routines can be employed for learning algorithms that translate into an unstructured search task, as can be done, for instance, in the case of the k-medians and the k-nearest neighbors algorithms. Other applications include quadratic speedups in the training of perceptrons. An e
Read more →
Situated

In artificial intelligence and cognitive science, the term situated refers to an agent which is embedded in an environment. The term situated is commonly used to refer to robots, but some researchers argue that software agents can also be situated if: they exist in a dynamic (rapidly changing) environment, which they can manipulate or change through their actions, and which they can sense or perceive. Examples might include web-based agents, which can alter data or trigger processes (such as purchases) over the internet, or virtual-reality bots which inhabit and change virtual worlds, such as Second Life. Being situated is generally considered to be part of being embodied, but it is useful to consider each perspective individually. The situated perspective emphasizes that intelligent behaviour derives from the environment and the agent's interactions with it. The nature of these interactions are defined by an agent's embodiment.
Read more →
Elasticity (computing)

In computing, elasticity is defined as "the degree to which a system is able to adapt to workload changes by provisioning and de-provisioning resources in an autonomic manner, such that at each point in time the available resources match the current demand as closely as possible". Elasticity is a defining characteristic that differentiates cloud computing from previously proposed distributed computing paradigms, such as grid computing. The dynamic adaptation of capacity, e.g., by altering the use of computing resources, to meet a varying workload is called "elastic computing". In the world of distributed systems, there are several definitions according to the authors; some consider the concepts of scalability a sub-part of elasticity, others as being distinct. == Purpose == Elasticity aims to match the amount of resources allocated to a service with the amount of resources it actually requires, avoiding over- or under-provisioning. Over-provisioning, i.e., allocating more resources than required, should be avoided as it may incur extra costs (monetary, energy, operational, etc.) for unused or underutilized resources. For example, if a website is over-provisioned with two cloud computing resources to handle current demand that only requires one resource, the costs of maintaining the second resource would effectively be wasted. Under-provisioning, i.e., allocating fewer resources than required, must be avoided; otherwise, the service cannot serve its users with a good service. For example, under-provisioning a website may make it seem slow or unreachable, because not enough resources have been allocated to meet current demand. == Example == Elasticity can be illustrated through an example of a service provider who wants to run a website on the cloud. At moment t 0 {\displaystyle t_{0}} , the website is unpopular and a single machine is sufficient to serve all users. At moment t 1 {\displaystyle t_{1}} , the website suddenly becomes popular, and a single machine is no longer sufficient to serve all users. Based on the number of web users simultaneously accessing the website and the resource requirements of the web server, ten machines are needed. An elastic system should immediately detect this condition and provision nine additional machines from the cloud to serve all users responsively. At time t 2 {\displaystyle t_{2}} , the website becomes unpopular again. The ten machines currently allocated to the website are mostly idle and a single machine would be sufficient to serve the few users who are accessing the website. An elastic system should immediately detect this condition and deprovision nine machines, releasing them to the cloud. == Problems == === Resource provisioning time === Resource provisioning takes time. A cloud virtual machine (VM) can be acquired at any time by the user; however, it may take up to several minutes for the acquired VM to be ready to use. The VM startup time is dependent on factors such as image size, VM type, data center location, number of VMs, etc. Cloud providers have different VM startup performance. This implies that any control mechanism designed for elastic applications must consider the time needed for the resource provisioning actions to take effect. === Monitoring elastic applications === Elastic applications can allocate and deallocate resources on demand for specific application components. This makes cloud resources volatile, and traditional monitoring tools which associate monitoring data with a particular resource, such as Ganglia or Nagios, are no longer suitable for monitoring the behavior of elastic applications. For example, during its lifetime, a data storage tier of an elastic application might add and remove data storage VMs due to cost and performance requirements, varying the number of used VMs. Thus, additional information is needed in monitoring elastic applications, such as associating the logical application structure over the underlying virtual infrastructure. This in turn generates other problems, such as data aggregation from multiple VMs towards extracting the behavior of the application component running on top of those VMs, as different metrics may need to be aggregated differently (e.g., CPU usage could be averaged, network transfer might be summed up). === Stakeholder requirements === When deploying applications in cloud infrastructures (IaaS/PaaS), stakeholder requirements need to be considered in order to ensure that elastic behavior meets stakeholder needs. Traditionally, the optimal trade-off between cost and quality or performance is considered; however, for real world cloud users, requirements regarding elastic behavior are more complex and target multiple dimensions of elasticity (e.g., SYBL). === Multiple levels of control === Cloud applications vary in type and complexity, with multiple levels of artifacts deployed in layers. Controlling such structures must take into consideration a variety of issues. For multi-level control, control systems need to consider the impact lower level control has upon higher level ones, and vice versa (e.g., controlling virtual machines, web containers, or web services in the same time), as well as conflicts that may appear between various control strategies from various levels. Elastic strategies on in cloud computing can take advantage of control-theoretic methods (e.g., predictive control has been experimented in cloud computing scenarios by showing considerable advantages with respect to reactive methods). One approach to multi-level elastic clouc control is rSYBL.
Read more →
Self-supervised learning

Self-supervised learning (SSL) is a paradigm in machine learning where a model is trained on a task using the data itself to generate supervisory signals, rather than relying on externally-provided labels. In the context of neural networks, self-supervised learning aims to leverage inherent structures or relationships within the input data to create meaningful training signals. SSL tasks are designed so that solving them requires capturing essential features or relationships in the data. The input data is typically augmented or transformed in a way that creates pairs of related samples, where one sample serves as the input, and the other is used to formulate the supervisory signal. This augmentation can involve introducing noise, cropping, rotation, or other transformations. Self-supervised learning more closely imitates the way humans learn to classify objects. During SSL, the model learns in two steps. First, the task is solved based on an auxiliary or pretext classification task using pseudo-labels, which help to initialize the model parameters. Next, the actual task is performed with supervised or unsupervised learning. Self-supervised learning has produced promising results in recent years, and has found practical application in fields such as audio processing, and is being used by Facebook and others for speech recognition. == Pseudo-labels == Pseudo-labels are automatically generated labels that a model assigns to unlabeled data based on its own predictions. They are widely used in self-supervised and semi-supervised learning, where ground-truth annotations are limited or unavailable. By treating predicted labels as surrogate ground truth, learning algorithms can make use of large quantities of unlabeled data in the training process. Pseudo-labeling also plays an important role in systems that must adapt to concept drift, where the statistical properties of the data change over time. In these scenarios, the model may detect that an incoming instance deviates from previously learned behavior. The system then generates a classification result for that instance, and this predicted class is used as a pseudo-label for updating or retraining model components that are becoming outdated. This approach enables continuous adaptation in dynamic environments without requiring manual annotation. In many adaptive learning pipelines, pseudo-labels are chosen when the classifier produces sufficiently confident predictions, reducing the risk of propagating errors. These pseudo-labeled instances are then incorporated into training to refresh or evolve the model's understanding of emerging data patterns, particularly when existing components show signs of “aging” due to drift or distributional shifts. This strategy reduces reliance on manual labeling while helping maintain long-term model performance. == Types == === Autoassociative self-supervised learning === Autoassociative self-supervised learning is a specific category of self-supervised learning where a neural network is trained to reproduce or reconstruct its own input data. In other words, the model is tasked with learning a representation of the data that captures its essential features or structure, allowing it to regenerate the original input. The term "autoassociative" comes from the fact that the model is essentially associating the input data with itself. This is often achieved using autoencoders, which are a type of neural network architecture used for representation learning. Autoencoders consist of an encoder network that maps the input data to a lower-dimensional representation (latent space), and a decoder network that reconstructs the input from this representation. The training process involves presenting the model with input data and requiring it to reconstruct the same data as closely as possible. The loss function used during training typically penalizes the difference between the original input and the reconstructed output (e.g. mean squared error). By minimizing this reconstruction error, the autoencoder learns a meaningful representation of the data in its latent space. === Contrastive self-supervised learning === For a binary classification task, training data can be divided into positive examples and negative examples. Positive examples are those that match the target. For example, if training a classifier to identify birds, the positive training data would include images that contain birds. Negative examples would be images that do not. Contrastive self-supervised learning uses both positive and negative examples. The loss function in contrastive learning is used to minimize the distance between positive sample pairs, while maximizing the distance between negative sample pairs. An early example uses a pair of 1-dimensional convolutional neural networks to process a pair of images and maximize their agreement. Contrastive Language-Image Pre-training (CLIP) allows joint pretraining of a text encoder and an image encoder, such that a matching image-text pair have image encoding vector and text encoding vector that span a small angle (having a large cosine similarity). InfoNCE (Noise-Contrastive Estimation) is a method to optimize two models jointly, based on Noise Contrastive Estimation (NCE). Given a set X = { x 1 , … x N } {\displaystyle X=\left\{x_{1},\ldots x_{N}\right\}} of N {\displaystyle N} random samples containing one positive sample from p ( x t + k ∣ c t ) {\displaystyle p\left(x_{t+k}\mid c_{t}\right)} and N − 1 {\displaystyle N-1} negative samples from the 'proposal' distribution p ( x t + k ) {\displaystyle p\left(x_{t+k}\right)} , it minimizes the following loss function: L N = − E X [ log ⁡ f k ( x t + k , c t ) ∑ x j ∈ X f k ( x j , c t ) ] {\displaystyle {\mathcal {L}}_{\mathrm {N} }=-\mathbb {E} _{X}\left[\log {\frac {f_{k}\left(x_{t+k},c_{t}\right)}{\sum _{x_{j}\in X}f_{k}\left(x_{j},c_{t}\right)}}\right]} === Non-contrastive self-supervised learning === Non-contrastive self-supervised learning (NCSSL) uses only positive examples. Counterintuitively, NCSSL converges on a useful local minimum rather than reaching a trivial solution, with zero loss. For the example of binary classification, it would trivially learn to classify each example as positive. Effective NCSSL requires an extra predictor on the online side that does not back-propagate on the target side. === Joint-Embedding and Predictive Architectures === A major class of self-supervised learning moves beyond contrastive pairs, instead maximizing the agreement between views while preventing collapse through statistical constraints. Rooted in Deep Canonical Correlation Analysis (Deep CCA), this approach includes Joint-Embedding Architectures (JEA) like Barlow Twins and VICReg, which enforce covariance constraints to learn invariant representations without negative sampling. Deep Latent Variable Path Modelling (DLVPM) generalizes this to multimodal systems, using path models to enforce correlation and orthogonality across diverse data types. In 2022 Yann LeCun introduced Joint-Embedding Predictive Architectures (JEPA) as a step towards decision making, reasoning, and autonomous human intelligence in machines, including self-improvement through autonomous learning. Founded in representation learning, LeCun included the concept of a “world model” in JEPA which aims to enable machines to replicate human intellect by providing machines with a concept for the world in which they exist. Unlike autoencoders, JEPAs operate entirely in latent space, avoiding pixel-level noise to focus on semantic structure. Rather than just learning invariance, JEPAs learn by predicting masked latent representations from visible context. JEPA has been applied to domains such as image analysis, audio processing, and motion in images and video. == Comparison with other forms of machine learning == SSL belongs to supervised learning methods insofar as the goal is to generate a classified output from the input. At the same time, however, it does not require the explicit use of labeled input-output pairs. Instead, correlations, metadata embedded in the data, or domain knowledge present in the input are implicitly and autonomously extracted from the data. These supervisory signals, extracted from the data, can then be used for training. SSL is similar to unsupervised learning in that it does not require labels in the sample data. Unlike unsupervised learning, however, learning is not done using inherent data structures. Semi-supervised learning combines supervised and unsupervised learning, requiring only a small portion of the learning data be labeled. In transfer learning, a model designed for one task is reused on a different task. Training an autoencoder intrinsically constitutes a self-supervised process, because the output pattern needs to become an optimal reconstruction of the input pattern itself. However, in current jargon, the term 'self-supervised' often refers to tasks based on a pretext-task training setup
Read more →
Personality computing

Personality computing is a research field related to artificial intelligence and personality psychology that studies personality by means of computational techniques from different sources, including text, multimedia, and social networks. == Overview == Personality computing addresses three main problems involving personality: automatic personality recognition, perception, and synthesis. Automatic personality recognition is the inference of the personality type of target individuals from their digital footprint. Automatic personality perception is the inference of the personality attributed by an observer to a target individual based on some observable behavior. Automatic personality synthesis is the generation of the style or behaviour of artificial personalities in Avatars and virtual agents. Self-assessed personality tests or observer ratings are always exploited as the ground truth for testing and validating the performance of artificial intelligence algorithms for the automatic prediction of personality types. There is a wide variety of personality tests, such as the Myers Briggs Type Indicator (MBTI) or the MMPI, but the most used are tests based on the Five Factor Model such as the Revised NEO Personality Inventory. Personality computing can be considered as an extension or complement of Affective computing, where the former focuses on personality traits and the latter on affective states. A further extension of the two fields is Character Computing which combines various character states and traits including but not limited to personality and affect. == History == Personality computing began around 2005 with the pioneering research in personality recognition by Shlomo Argamon and later by François Mairesse. These works showed that personality traits could be inferred with reasonable accuracy from text, such as blogs, self-presentations, and email addresses. In 2008, the concept of "portable personality" for the distributed management of personality profiles has been developed. A few years later, research began in personality recognition and perception from multimodal and social signals, such as recorded meetings and voice calls. In the 2010s, the research focused mainly on personality recognition and perception from social media, helped by the first workshops organized by Fabio Celli. In particular personality was extracted from Facebook, Twitter and Instagram. In the same years, automatic personality synthesis helped improve the coherence of simulated behavior in virtual agents. Scientific works by Michal Kosinski demonstrated the validity of Personality Computing from different digital footprints, in particular from user preferences such as Facebook page likes, showed that machines can recognize personality better than humans and raised a warning against Cambridge Analytica and misuse of this kind of technology. == Applications == Personality computing techniques, in particular personality recognition and perception, have applications in Social media marketing, where they can help reducing the cost of advertising campaigns through psychological targeting.
Read more →
Syman

SYMAN is an artificial intelligence technology that uses data from social media profiles to identify trends in the job market. SYMAN is designed to organize actionable data for products and services including recruiting, human capital management, CRM, and marketing. SYMAN was developed with a $21 million series B financing round secured by Identified, which was led by VantagePoint Capital Partners and Capricorn Investment Group.
Read more →
Macromedia FreeHand

Macromedia FreeHand (formerly Aldus FreeHand) is a discontinued computer application for creating two-dimensional vector graphics oriented primarily to professional illustration, desktop publishing and content creation for the Web. FreeHand was similar in scope, intended market, and functionality to Adobe Illustrator, CorelDRAW and Xara Designer Pro. Because of FreeHand's dedicated page layout and text control features, it also compares to Adobe InDesign and QuarkXPress. Professions using FreeHand include graphic design, illustration, cartography, fashion and textile design, product design, architects, scientific research, and multimedia production. FreeHand was created by Altsys Corporation in 1988 and licensed to Aldus Corporation, which released versions 1 through 4. In 1994, Aldus merged with Adobe Systems and because of the overlapping market with Adobe Illustrator, FreeHand was returned to Altsys by order of the Federal Trade Commission. Altsys was later bought by Macromedia, which released FreeHand versions 5 through 11 (FreeHand MX). In 2005, Adobe Systems acquired Macromedia and its product line which included FreeHand MX, under whose ownership it presently resides. Since 2003, FreeHand development has been discontinued; in the Adobe Systems catalog, FreeHand has been replaced by Adobe Illustrator. FreeHand MX continues to run under Windows 11 and under Mac OS X 10.6 (Snow Leopard) within Rosetta, a PowerPC code emulator, and requires a registration patch supplied by Adobe. FreeHand 10 runs without problems on Mac OS X Snow Leopard with Rosetta enabled, and does not require a registration patch. Later versions of macOS can use a Mac OS X Snow Leopard Server virtual machine to emulate the required PowerPC support. == History == === Altsys and Aldus FreeHand === In 1984, James R. Von Ehr founded Altsys Corporation to develop graphics applications for personal computers. Based in Plano, Texas, the company initially produced font editing and conversion software; Fontastic Plus, Metamorphosis, and the Art Importer. Their premier PostScript font-design package, Fontographer, was released in 1986 and was the first such program on the market. With the PostScript background having been established by Fontographer, Altsys also developed FreeHand (originally called Masterpiece) as a Macintosh Postscript-based illustration program that used Bézier curves for drawing and was similar to Adobe Illustrator. FreeHand was announced as "... a Macintosh graphics program described as having all the features of Adobe's Illustrator plus drawing tools such as those in Mac Paint and Mac Draft and special effects similar to those in Cricket Draw." Seattle's Aldus Corporation acquired a licensing agreement with Altsys Corporation to release FreeHand along with their flagship product, Pagemaker, and Aldus FreeHand 1.0 was released in 1988. FreeHand's product name used intercaps; the F and H were capitalized. The partnership between the two companies continued with Altsys developing FreeHand and with Aldus controlling marketing and sales. After 1988, a competitive exchange between Aldus FreeHand and Adobe Illustrator ensued on the Macintosh platform with each software advancing new tools, achieving better speed, and matching significant features. Windows PC development also allowed Illustrator 2 (aka, Illustrator 88 on the Mac) and FreeHand 3 to release Windows versions to the graphics market. FreeHand 1.0 sold for $495 in 1988. It included the standard drawing tools and features as other draw programs including special effects in fills and screens, text manipulation tools, and full support for CMYK color printing. It was also possible to create and insert PostScript routines anywhere within the program. FreeHand performed in preview mode instead of keyline mode but performance was slower. FreeHand 2.0 sold for $495 in 1989. Besides improving on the features of FreeHand 1.0, FreeHand 2 added faster operation, Pantone colors, stroked text, flexible fill patterns and automatically import graphic assets from other programs. It added accurate control over a color monitor screen display, limited only by its resolution. FreeHand 3.0 sold for $595 in 1991. New features included resizable color, style, and layer panels including an Attributes menu. Also tighter precision of both the existing tools and aligning of objects. FH3 created compound Paths. Text could be converted to paths, applied to an ellipse, or made vertical. Carried over from version 1.0, FreeHand 3 suffered by having text entered into a dialog box instead of directly to the page. In October 1991, a 3.1 upgrade made FreeHand work with System 7 but additionally, it supported pressure-sensitive drawing which offered varying line widths with a users stroke. It improved element manipulation and added more import/export options. FreeHand 4.0 sold for $595 in 1994. Altsys ported FreeHand 3.0 to the NeXT system creating a new program named Virtuoso. Virtuoso continued its development at Altsys and version 2.0 of Virtuoso was feature-equivalent to FreeHand 4 (with the addition of NeXT-specific features such as Services and Display PostScript) and file compatible, with Virtuoso 2 able to open FreeHand 4 files and vice versa. A prominent feature of this version was the ability to type directly into the page and wrap inside or outside any shape. It also included drag-and-drop color imaging, a larger pasteboard, and a user interface that featured floating, rollup panels. The colors palette included a color mixer for adding new colors to the swatch list. Speed increases were made. In the same year of FreeHand 4 release, Adobe Systems announced merger plans with Aldus Corporation for $525 million. Fear about the end of competition between these two leading applications was reported in the media and expressed by customers (Illustrator versus FreeHand and Adobe Photoshop versus Aldus PhotoStyler.) Because of this overlapping of the market, Altsys stepped in by suing Aldus, saying that the merger deal was "a prima facie violation of a non-compete clause within the FreeHand licensing agreement." Altsys CEO Jim Von Ehr explained, "No one loves FreeHand more than we do. We will do whatever it takes to see it survive." The Federal Trade Commission issued a complaint against Adobe Systems on October 18, 1994, ordering a divestiture of FreeHand to "remedy the lessening of competition resulting from the acquisition as alleged in the Commission's complaint," and further, the FTC ordering, "That for a period of ten (10) years from the date on which this order becomes final, respondents shall not, without the prior approval of the Commission, directly or indirectly, through subsidiaries, partnerships, or otherwise .. Acquire any Professional Illustration Software or acquire or enter into any exclusive license to Professional Illustration Software;" (referring to FreeHand.) FreeHand was returned to Altsys with all licensing and marketing rights as well as Aldus FreeHand's customer list. === Macromedia Freehand === By late 1994, Altsys still retained all rights to FreeHand. Despite brief plans to keep it in-house to sell it along with Fontographer and Virtuoso, Altsys reached an agreement with the multimedia software company, Macromedia, to be acquired. This mutual agreement provided FreeHand and Fontographer a new home with ample resources for marketing, sales, and competition against the newly merged Adobe-Aldus company. Altsys would remain in Richardson, Texas, but would be renamed as the Digital Arts Group of Macromedia and was responsible for the continued development of FreeHand. Macromedia received FreeHand's 200,000 customers and expanded its traditional product line of multimedia graphics software to illustration and design graphics software. CEO James Von Ehr became a Macromedia vice-president until 1997 when he left to start another venture. FreeHand 5.0 sold for $595 in 1995. This version featured a more customizable and expanded workspace, multiple views, stronger design and editing tools, a report generator, spell check, paragraph styles, multicolor gradient fills up to 64 colors, speed improvements, and it accepted Illustrator plugins. In September 1995, a 5.5 upgrade added Photoshop plug-in support, PDF import capabilities, the Extract feature, inline graphics to text, improved auto-expanding text containers, the Crop feature, and the Create PICT Image feature. A FreeHand 5.5 upgrade was part of the FreeHand Graphics Studio (a suite that included Fontographer, Macromedia xRes image editing application, and Extreme 3D animation and modeling application). FreeHand 6.0 in 1996. This version only existed in beta. Some Freehand 7 prerelease versions were released under the Freehand 6 tag. FreeHand 7.0 sold for $399 in 1996, or $449 as part of the FreeHand Graphics Studio (see above.) Features included a redesigned user interface that allowed recombining Inspectors, Panel Tabs, Dockable Panels, Smart Cursors,
Read more →
Stability (learning theory)

Stability, also known as algorithmic stability, is a notion in computational learning theory of how a machine learning algorithm output is changed with small perturbations to its inputs. A stable learning algorithm is one for which the prediction does not change much when the training data is modified slightly. For instance, consider a machine learning algorithm that is being trained to recognize handwritten letters of the alphabet, using 1000 examples of handwritten letters and their labels ("A" to "Z") as a training set. One way to modify this training set is to leave out an example, so that only 999 examples of handwritten letters and their labels are available. A stable learning algorithm would produce a similar classifier with both the 1000-element and 999-element training sets. Stability can be studied for many types of learning problems, from language learning to inverse problems in physics and engineering, as it is a property of the learning process rather than the type of information being learned. The study of stability gained importance in computational learning theory in the 2000s when it was shown to have a connection with generalization. It was shown that for large classes of learning algorithms, notably empirical risk minimization algorithms, certain types of stability ensure good generalization. == History == A central goal in designing a machine learning system is to guarantee that the learning algorithm will generalize, or perform accurately on new examples after being trained on a finite number of them. In the 1990s, milestones were reached in obtaining generalization bounds for supervised learning algorithms. The technique historically used to prove generalization was to show that an algorithm was consistent, using the uniform convergence properties of empirical quantities to their means. This technique was used to obtain generalization bounds for the large class of empirical risk minimization (ERM) algorithms. An ERM algorithm is one that selects a solution from a hypothesis space H {\displaystyle H} in such a way to minimize the empirical error on a training set S {\displaystyle S} . A general result, proved by Vladimir Vapnik for an ERM binary classification algorithms, is that for any target function and input distribution, any hypothesis space H {\displaystyle H} with VC-dimension d {\displaystyle d} , and n {\displaystyle n} training examples, the algorithm is consistent and will produce a training error that is at most O ( d n ) {\displaystyle O\left({\sqrt {\frac {d}{n}}}\right)} (plus logarithmic factors) from the true error. The result was later extended to almost-ERM algorithms with function classes that do not have unique minimizers. Vapnik's work, using what became known as VC theory, established a relationship between generalization of a learning algorithm and properties of the hypothesis space H {\displaystyle H} of functions being learned. However, these results could not be applied to algorithms with hypothesis spaces of unbounded VC-dimension. Put another way, these results could not be applied when the information being learned had a complexity that was too large to measure. Some of the simplest machine learning algorithms—for instance, for regression—have hypothesis spaces with unbounded VC-dimension. Another example is language learning algorithms that can produce sentences of arbitrary length. Stability analysis was developed in the 2000s for computational learning theory and is an alternative method for obtaining generalization bounds. The stability of an algorithm is a property of the learning process, rather than a direct property of the hypothesis space H {\displaystyle H} , and it can be assessed in algorithms that have hypothesis spaces with unbounded or undefined VC-dimension such as nearest neighbor. A stable learning algorithm is one for which the learned function does not change much when the training set is slightly modified, for instance by leaving out an example. A measure of Leave one out error is used in a Cross Validation Leave One Out (CVloo) algorithm to evaluate a learning algorithm's stability with respect to the loss function. As such, stability analysis is the application of sensitivity analysis to machine learning. == Summary of classic results == Early 1900s - Stability in learning theory was earliest described in terms of continuity of the learning map L {\displaystyle L} , traced to Andrey Nikolayevich Tikhonov. 1979 - Devroye and Wagner observed that the leave-one-out behavior of an algorithm is related to its sensitivity to small changes in the sample. 1999 - Kearns and Ron discovered a connection between finite VC-dimension and stability. 2002 - In a landmark paper, Bousquet and Elisseeff proposed the notion of uniform hypothesis stability of a learning algorithm and showed that it implies low generalization error. Uniform hypothesis stability, however, is a strong condition that does not apply to large classes of algorithms, including ERM algorithms with a hypothesis space of only two functions. 2002 - Kutin and Niyogi extended Bousquet and Elisseeff's results by providing generalization bounds for several weaker forms of stability which they called almost-everywhere stability. Furthermore, they took an initial step in establishing the relationship between stability and consistency in ERM algorithms in the Probably Approximately Correct (PAC) setting. 2004 - Poggio et al. proved a general relationship between stability and ERM consistency. They proposed a statistical form of leave-one-out-stability which they called CVEEEloo stability, and showed that it is a) sufficient for generalization in bounded loss classes, and b) necessary and sufficient for consistency (and thus generalization) of ERM algorithms for certain loss functions such as the square loss, the absolute value and the binary classification loss. 2010 - Shalev Shwartz et al. noticed problems with the original results of Vapnik due to the complex relations between hypothesis space and loss class. They discuss stability notions that capture different loss classes and different types of learning, supervised and unsupervised. 2016 - Moritz Hardt et al. proved stability of gradient descent given certain assumption on the hypothesis and number of times each instance is used to update the model. == Preliminary definitions == We define several terms related to learning algorithms training sets, so that we can then define stability in multiple ways and present theorems from the field. A machine learning algorithm, also known as a learning map L {\displaystyle L} , maps a training data set, which is a set of labeled examples ( x , y ) {\displaystyle (x,y)} , onto a function f {\displaystyle f} from X {\displaystyle X} to Y {\displaystyle Y} , where X {\displaystyle X} and Y {\displaystyle Y} are in the same space of the training examples. The functions f {\displaystyle f} are selected from a hypothesis space of functions called H {\displaystyle H} . The training set from which an algorithm learns is defined as S = { z 1 = ( x 1 , y 1 ) , . . , z m = ( x m , y m ) } {\displaystyle S=\{z_{1}=(x_{1},\ y_{1})\ ,..,\ z_{m}=(x_{m},\ y_{m})\}} and is of size m {\displaystyle m} in Z = X × Y {\displaystyle Z=X\times Y} drawn i.i.d. from an unknown distribution D. Thus, the learning map L {\displaystyle L} is defined as a mapping from Z m {\displaystyle Z_{m}} into H {\displaystyle H} , mapping a training set S {\displaystyle S} onto a function f S {\displaystyle f_{S}} from X {\displaystyle X} to Y {\displaystyle Y} . Here, we consider only deterministic algorithms where L {\displaystyle L} is symmetric with respect to S {\displaystyle S} , i.e. it does not depend on the order of the elements in the training set. Furthermore, we assume that all functions are measurable and all sets are countable. The loss V {\displaystyle V} of a hypothesis f {\displaystyle f} with respect to an example z = ( x , y ) {\displaystyle z=(x,y)} is then defined as V ( f , z ) = V ( f ( x ) , y ) {\displaystyle V(f,z)=V(f(x),y)} . The empirical error of f {\displaystyle f} is I S [ f ] = 1 n ∑ V ( f , z i ) {\displaystyle I_{S}[f]={\frac {1}{n}}\sum V(f,z_{i})} . The true error of f {\displaystyle f} is I [ f ] = E z V ( f , z ) {\displaystyle I[f]=\mathbb {E} _{z}V(f,z)} Given a training set S of size m, we will build, for all i = 1....,m, modified training sets as follows: By removing the i-th element S | i = { z 1 , . . . , z i − 1 , z i + 1 , . . . , z m } {\displaystyle S^{|i}=\{z_{1},...,\ z_{i-1},\ z_{i+1},...,\ z_{m}\}} By replacing the i-th element S i = { z 1 , . . . , z i − 1 , z i ′ , z i + 1 , . . . , z m } {\displaystyle S^{i}=\{z_{1},...,\ z_{i-1},\ z_{i}',\ z_{i+1},...,\ z_{m}\}} == Definitions of stability == === Hypothesis Stability === An algorithm L {\displaystyle L} has hypothesis stability β with respect to the loss function V if the following holds: ∀ i ∈ { 1 , . . . , m } , E S , z [ | V ( f S , z ) − V ( f S |
Read more →
NASA AI Assisted-Air Quality Monitoring Project

The NASA Expert-System Ion Trap Mass Spectrometer (ES-ITMS) Project was a public-private partnership to develop an artificial intelligence assisted, air quality monitoring system and was qualified for use on the Space Shuttle. The partnership was also the first cost and intellectual property shared public-partnership implemented by NASA, which used the commercial Research and Development Limited Partnership (RDLP) model that had been adopted by the Reagan Administration for Department of Defense semiconductor development, and recommended for use by NASA for space commercialization. The project partners included NASA, the University of Florida and Finnigan MAT Corporation, was organized and administered by the NASA Joint Enterprise Institute (subsequently NASA Joint Sponsored Program) and ran from 1988 through 1990. The partnership concluded final testing in 1991, generating four patents, expert system software and application protocol reports. The system was space qualified for use on the Shuttle and elements of the ES-ITMS system were integrated into the product Improvements for Finnigan MAT corporation. The success of the partnership lead NASA to create a pilot program to develop partnership business models as an ongoing management practice. == Purpose and objectives == The need to monitor air quality in confined spaces represented an increasing challenge for NASA's planned space missions and private sector facility managers facing the increased scrutiny of possible air contaminants. Up to the early 1980's, air quality monitors generally required large spaces and human technicians to interpret readings. This created a need for miniaturized air quality monitors that could generate reliable and accurate analytic results without on-site technician presence. NASA initiated projects to develop..."mobile and/or portable mass spectrometers" that evaluated the "tradeoff between instrumentation capabilities and space, weight and power considerations." NASA selected a "commercial ITMS instrument capable of generating electron ionization, chemical ionization and mass spectrometry data", to develop a linked expert system to accomplish analysis without human intervention. The commercial instrumentation was from Finnigan MAT corporation while the scientific expertise to support expert system development was available at the University of Florida. The project managers at NASA Ames created a single, integrated project using the RDLP model with objectives to: Develop AI/expert system software for instrument control (NASA's role) Expand sensitivity, selectivity and speed of the spectrometer (Univ Florida role) Expand the spectrometer analytic capability and automate the screening (Finnigan role) == Membership == The partnership included seven specialists from five member organizations: Federal Government National Aeronautics and Space Administration (NASA) NASA Ames Research Center (ARC) NASA Kennedy Space Center (KSC) Commercial Finnigan MAT Corporation (Thermo-Fisher Scientific) TGS Technology, Inc. Research Management University of Florida == Organization, management and administration == The technical project was organized into two development teams, one located in at the NASA Ames Research Center covering expert systems and analytic capabilities and one in Florida covering improved sensitivity and testing. The partnership management and administration was provided by a non-profit, partnership support organization: the Joint Enterprise Institute operating through San Francisco State University Foundation (SFSUF) with a NASA employee liaison, Syed Shariq. == Public-private partnership == The partnership structure was as a prototype test of a pilot NASA program to develop public-private partnership business models. The pilot program was known as the NASA Joint Sponsored Research Program (JSRP), which operated as the NASA Joint Enterprise Institute between 1988 and 1991. The partnership was the first public-private, research and development partnership implemented by NASA in response to national policy shifts to increase technology transfer and space commercialization. The partnership structure included a two year technology development and testing plan that cost $610,000, of which NASA funded $310,000, Finnigan $175,000 and the University of Florida $95,000. == Results and commercialization == The project generated patents (4), software (2) and application protocol reports (8). NASA gained use of the patents and jointly development software while Finnigan received commercial utilization rights. The results were commercialized within eighteen months of project completion. == Recognition == NASA recognized the project as a space qualified instrument. Its achievements were reported to the NASA Administrator, directly leading to establishment of the agency-wide Joint Sponsored Research Program.
Read more →