AI Face Time

AI Face Time — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

PatchMatch

PatchMatch is an algorithm used to quickly find correspondences (or matches) between small square regions (or patches) of an image. It has various applications in image editing, such as reshuffling or removing objects from images or altering their aspect ratios without cropping or noticeably stretching them. PatchMatch was first presented in a 2011 paper by researchers at Princeton University. == Algorithm == The goal of the algorithm is to find the patch correspondence by defining a nearest-neighbor field (NNF) as a function f : R 2 → R 2 {\displaystyle f:\mathbb {R} ^{2}\to \mathbb {R} ^{2}} of offsets, which is over all possible matches of patch (location of patch centers) in image A, for some distance function of two patches D {\displaystyle D} . So, for a given patch coordinate a {\displaystyle a} in image A {\displaystyle A} and its corresponding nearest neighbor b {\displaystyle b} in image B {\displaystyle B} , f ( a ) {\displaystyle f(a)} is simply b − a {\displaystyle b-a} . However, if we search for every point in image B {\displaystyle B} , the work will be too hard to complete. So the following algorithm is done in a randomized approach in order to accelerate the calculation speed. The algorithm has three main components. Initially, the nearest-neighbor field is filled with either random offsets or some prior information. Next, an iterative update process is applied to the NNF, in which good patch offsets are propagated to adjacent pixels, followed by random search in the neighborhood of the best offset found so far. Independent of these three components, the algorithm also uses a coarse-to-fine approach by building an image pyramid to obtain the better result. === Initialization === When initializing with random offsets, we use independent uniform samples across the full range of image B {\displaystyle B} . This algorithm avoids using an initial guess from the previous level of the pyramid because in this way the algorithm can avoid being trapped in local minima. === Iteration === After initialization, the algorithm attempted to perform iterative process of improving the N N F {\displaystyle NNF} . The iterations examine the offsets in scan order (from left to right, top to bottom), and each undergoes propagation followed by random search. === Propagation === We attempt to improve f ( x , y ) {\displaystyle f(x,y)} using the known offsets of f ( x − 1 , y ) {\displaystyle f(x-1,y)} and f ( x , y − 1 ) {\displaystyle f(x,y-1)} , assuming that the patch offsets are likely to be the same. That is, the algorithm will take new value for f ( x , y ) {\displaystyle f(x,y)} to be arg ⁡ min ( x , y ) D ( f ( x , y ) ) , D ( f ( x − 1 , y ) ) , D ( f ( x , y − 1 ) ) {\displaystyle \arg \min \limits _{(x,y)}{D(f(x,y)),D(f(x-1,y)),D(f(x,y-1))}} . So if f ( x , y ) {\displaystyle f(x,y)} has a correct mapping and is in a coherent region R {\displaystyle R} , then all of R {\displaystyle R} below and to the right of f ( x , y ) {\displaystyle f(x,y)} will be filled with the correct mapping. Alternatively, on even iterations, the algorithm search for different direction, fill the new value to be arg ⁡ min ( x , y ) { D ( f ( x , y ) ) , D ( f ( x + 1 , y ) ) , D ( f ( x , y + 1 ) ) } {\displaystyle \arg \min \limits _{(x,y)}\{D(f(x,y)),D(f(x+1,y)),D(f(x,y+1))\}} . === Random search === Let v 0 = f ( x , y ) {\displaystyle v_{0}=f(x,y)} , we attempt to improve f ( x , y ) {\displaystyle f(x,y)} by testing a sequence of candidate offsets at an exponentially decreasing distance from v 0 {\displaystyle v_{0}} u i = v 0 + w α i R i {\displaystyle u_{i}=v_{0}+w\alpha ^{i}R_{i}} where R i {\displaystyle R_{i}} is a uniform random in [ − 1 , 1 ] × [ − 1 , 1 ] {\displaystyle [-1,1]\times [-1,1]} , w {\displaystyle w} is a large window search radius which will be set to maximum picture size, and α {\displaystyle \alpha } is a fixed ratio often assigned as 1/2. This part of the algorithm allows the f ( x , y ) {\displaystyle f(x,y)} to jump out of local minimum through random process. === Halting criterion === The often used halting criterion is set the iteration times to be about 4~5. Even with low iteration, the algorithm works well.
Read more →
List of monochrome and RGB color formats

This list of monochrome and RGB palettes includes generic repertoires of colors (color palettes) to produce black-and-white and RGB color pictures by a computer's display hardware. RGB is the most common method to produce colors for displays; so these complete RGB color repertoires have every possible combination of R-G-B triplets within any given maximum number of levels per component. Each palette is represented by a series of color patches. When the number of colors is low, a 1-pixel-size version of the palette appears below it, for easily comparing relative palette sizes. Huge palettes are given directly in one-color-per-pixel color patches. For each unique palette, an image color test chart and sample image (truecolor original follows) rendered with that palette (without dithering) are given. The test chart shows the full 256 levels of the red, green, and blue (RGB) primary colors and cyan, magenta, and yellow complementary colors, along with a full 256-level grayscale. Gradients of RGB intermediate colors (orange, lime green, sea green, sky blue, violet, and fuchsia), and a full hue spectrum are also present. Color charts are not gamma corrected. These elements illustrate the color depth and distribution of the colors of any given palette, and the sample image indicates how the color selection of such palettes could represent real-life images. These images are not necessarily representative of how the image would be displayed on the original graphics hardware, as the hardware may have additional limitations regarding the maximum display resolution, pixel aspect ratio and color placement. Implementation of these formats is specific to each machine. Therefore, the number of colors that can be simultaneously displayed in a given text or graphic mode might be different. Also, the actual displayed colors are subject to the output format used - PAL or NTSC, composite or component video, etc. - and might be slightly different. For simulated images and specific hardware and alternate methods to produce colors other than RGB (ex: composite), see the List of 8-bit computer hardware palettes, the List of 16-bit computer hardware palettes and the List of video game console palettes. For various software arrangements and sorts of colors, including other possible full RGB arrangements within 8-bit color depth displays, see the List of software palettes. == Monochrome palettes == These palettes only have some shades of gray, from black to white (considered the darkest and lightest "grays", respectively). The general rule is that those palettes have 2n different shades of gray, where n is the number of bits needed to represent a single pixel. === Monochrome (1-bit grayscale) === Monochrome graphics displays typically have a black background with a white or light gray image, though green and amber monochrome monitors were also common. Such a palette requires only one bit per pixel. Where photo-realism was desired, these early computer systems had a heavy reliance on dithering to make up for the limits of the technology. In some systems, as Hercules and CGA graphic cards for the IBM PC, a bit value of 1 represents white pixels (light on) and a value of 0 the black ones (light off); others, like the Playdate and Atari ST and Apple Macintosh with monochrome monitors, a bit value of 0 means a white pixel (no ink) and a value of 1 means a black pixel (dot of ink), which it approximates to the printing logic. === 2-bit Grayscale === In a 2-bit color palette each pixel's value is represented by 2 bits resulting in a 4-value palette (22 = 4). 2-bit dithering: It has black, white and two intermediate levels of gray as follows: A monochrome 2-bit palette is used on: The Monochrome Display Adapter for the IBM PC NeXT Computer, NeXTcube and NeXTstation monochrome graphic displays. Original Game Boy system portable video game console. Macintosh PowerBook 150 monochrome LC displays. Amiga with A2024 monochrome monitor in high-resolution mode. The original Amazon Kindle The original WonderSwan The Tiger Electronics Game.com portable video game console The original Neo Geo Pocket. === 4-bit Grayscale === In a 4-bit color palette each pixel's value is represented by 4 bits resulting in a 16-value palette (24 = 16): 4-bit grayscale dithering does a fairly good job of reducing visible banding of the level changes: A monochrome 4-bit palette is used on: MOS Technology VDC (on the Commodore 128 with monochrome monitor) Amstrad CPC series with a GT64/GT65 Green Monitor (16 unique green shades) Amstrad CPC Plus series with the MM12 Monochrome monitor (16 shades of grey) Some Apple PowerBooks equipped with monochrome displays like the PowerBook 5300 The original VideoNow === 8-bit Grayscale === In an 8-bit color palette each pixel's value is represented by 8 bits resulting in a 256-value palette (28 = 256). This is usually the maximum number of grays in ordinary monochrome systems; each image pixel occupies a single memory byte. Most scanners can capture images in 8-bit grayscale, and image file formats like TIFF and JPEG natively support this monochrome palette size. Alpha channels employed for video overlay also use (conceptually) this palette. The gray level indicates the opacity of the blended image pixel over the background image pixel. == Dichrome palettes == === 16-bit RG palette === The RG or red–green color space is a color space that uses only two primary colors: red and green. It was used on early color processes for films. It was used as an additive format, similar to the RGB color model but without a blue channel, on processes such as Kinemacolor, Prizma, Technicolor I, Raycol, etc., producing shades of black, red, green and yellow. Alternatively, it was used as a subtractive format on Brewster Color I, Kodachrome I, Prizma II, Technicolor II, etc., producing shades of transparent, red, green and black. Until recently, its primary use was in low-cost light-emitting diode displays in which red and green tended to be far more common than the still nascent blue LED technology, but full-color LEDs with blue have become more common in recent years. ColorCode 3-D, a anaglyph stereoscopic color scheme, uses the RG color space to simulate a broad spectrum of color in one eye, while the blue portion of the spectrum transmits a black-and-white (black-and-blue) image to the other eye to give depth perception. === 16-bit RB palette === === 16-bit GB palette === == Regular RGB palettes == Here are grouped those full RGB hardware palettes that have the same number of binary levels (i.e., the same number of bits) for every red, green and blue components using the full RGB color model. Thus, the total number of colors are always the number of possible levels by component, n, raised to a power of 3: n×n×n = n3. === 3-bit RGB === 3-bit RGB dithering: Systems with a 3-bit RGB palette use 1 bit for each of the red, green and blue color components. That is, each component is either "on" or "off" with no intermediate states. This results in an 8-color palette ((21)3 = 23 = 8) that has black, white, the three RGB primary colors red, green and blue and their correspondent complementary colors cyan, magenta and yellow as follows: The color indices vary between implementations; therefore, index numbers are not given. The 3-bit RGB palette is used by: Text terminals following the ECMA-48 standard (sometimes known as the "ANSI standard", although ANSI X3.128 does not define colors) World System Teletext Level 1/1.5 Videotex Oric computers BBC Micro PC-8801 (up to the MkII) PC-9801 (with original 8086 CPU, before the VM/VX models) Sharp X1 (models before the X1 Turbo Z) Sharp MZ 700 FM-7, FM New 7, FM 77 (before the FM77AV) Sinclair QL Space Invaders Part II (arcade hardware) Macintosh SE (with a color printer or external monitor) Atari 2600 (SECAM version) Color Maximite (PIC32 based microcomputer) Arcadia 2001 PV-1000 Monkey Magic (arcade hardware) VIC-20 (high-res mode) Mouse Trap (arcade hardware) Sanyo MBC-550 series Windows 1.0 (includes dithering) === 6-bit RGB === Systems with a 6-bit RGB palette use 2 bits for each of the red, green, and blue color components. This results in a (22)3 = 43 = 64-color palette as follows: 6-bit RGB systems include the following: Enhanced Graphics Adapter (EGA) for IBM PC/AT (16 colors at once) Sega Master System video game console (32 colors at once) GIME for TRS-80 Color Computer 3 (16 colors at once) Pebble Time smartwatch which has a 6-bit (64 color) e-paper display Parallax Propeller using the reference VGA circuit === 9-bit RGB === Systems with a 9-bit RGB palette use 3 bits for each of the red, green, and blue color components. This results in a (23)3 = 83 = 512-color palette as follows: 9-bit RGB systems include the following: Atari ST (Normally 4 to 16 at once without tricks) MSX2 computers (up to 16 at once) Sega Genesis video game console, (64 colors at once) Sega Nomad TurboGrafx-16 (NEC PC-Engine) ZX Spectrum Next The NEC PC-88
Read more →
Cyber attribution

In the area of computer security, cyber attribution is an attribution of cybercrime, i.e., finding who perpetrated a cyberattack. Uncovering a perpetrator may give insights into various security issues, such as infiltration methods, communication channels, etc., and may help in enacting specific countermeasures. Cyber attribution is a costly endeavor requiring considerable resources and expertise in cyber forensic analysis. For governments and other major players dealing with cybercrime would require not only technical solutions, but legal and political ones as well, and for the latter ones cyber attribution is crucial. Attributing a cyberattack is difficult, and of limited interest to companies that are targeted by cyberattacks. In contrast, secret services often have a compelling interest in finding out whether a state is behind the attack. A further challenge in attribution of cyberattacks is the possibility of a false flag attack, where the actual perpetrator makes it appear that someone else caused the attack. Every stage of the attack may leave artifacts, such as entries in log files, that can be used to help determine the attacker's goals and identity. In the aftermath of an attack, investigators often begin by saving as many artifacts as they can find, and then try to determine the attacker.
Read more →
Event condition action

Event condition action (ECA) is a short-cut for referring to the structure of active rules in event-driven architecture and active database systems. Such a rule traditionally consisted of three parts: The event part specifies the signal that triggers the invocation of the rule The condition part is a logical test that, if satisfied or evaluates to true, causes the action to be carried out The action part consists of updates or invocations on the local data This structure was used by the early research in active databases which started to use the term ECA. Current state of the art ECA rule engines use many variations on rule structure. Also other features not considered by the early research is introduced, such as strategies for event selection into the event part. In a memory-based rule engine, the condition could be some tests on local data and actions could be updates to object attributes. In a database system, the condition could simply be a query to the database, with the result set (if not null) being passed to the action part for changes to the database. In either case, actions could also be calls to external programs or remote procedures. Note that for database usage, updates to the database are regarded as internal events. As a consequence, the execution of the action part of an active rule can match the event part of the same or another active rule, thus triggering it. The equivalent in a memory-based rule engine would be to invoke an external method that caused an external event to trigger another ECA rule. ECA rules can also be used in rule engines that use variants of the Rete algorithm for rule processing. == ECA rule engines == Rulecore Concurrent Rules Apart Database Detect Invocation Rules ConceptBase ECArules
Read more →
Vicuna LLM

Vicuna LLM is an omnibus large language model used in AI research. Its methodology is to enable the public at large to contrast and compare the accuracy of LLMs "in the wild" (an example of citizen science) and to vote on their output; a question-and-answer chat format is used. At the beginning of each round two LLM chatbots from a diverse pool of nine are presented randomly and anonymously, their identities only being revealed upon voting on their answers. The user has the option of either replaying ("regenerating") a round, or beginning an entirely fresh one with new LLMs. (The user also has the option of choosing which LLMs to do battle.) Based on Llama 2, it is an open source project, and it itself has become the subject of academic research in the burgeoning field. A non-commercial, public demo of the Vicuna-13b model is available to access using LMSYS.
Read more →
Anderson's rule (computer science)

In the field of computer security, Anderson's rule refers to a principle formulated by Ross J. Anderson: systems that handle sensitive personal information involve a trilemma of security, functionality, and scale, of which you can choose any two. A system that has information on many data subjects and to which many people require access is hard to secure unless its functionality is severely restricted. If it has rich functionality, you may have to restrict the number of people with access, or accept that some information will leak.
Read more →
Probiv

Probiv (Russian: пробив, literally "to pierce" or "to punch through") is an illicit data market operating primarily in Russia, where personal information from restricted government and corporate databases is bought and sold through networks of corrupt officials and insiders. The probiv market operates as a parallel information economy built on corrupt officials from various sectors including traffic police, banks, telecommunications companies, and security services who sell access to restricted databases. For fees ranging from as little as $10 to several hundred dollars, buyers can obtain passport numbers, addresses, travel histories, vehicle registrations, and telecommunications records. The market operates through various channels, including specialized Telegram bots and darknet forums. == Notable uses == Probiv services have been utilized by diverse actors for various purposes. Investigative journalists have used the market to conduct high-profile investigations, including tracing the FSB unit allegedly behind the poisoning of Alexei Navalny. Russian police and security services themselves have routinely used the black market to track activists and opposition figures. Since Russia's invasion of Ukraine, Ukrainian intelligence services have exploited the market to identify Russian military officials. == Government response == In late 2024, Russian authorities introduced legislation imposing penalties of up to ten years in prison for accessing or distributing leaked data. Several operators of probiv services, including the teams behind Usersbox and Solaris, have been arrested. However, the crackdown appears to have had unintended consequences. Many operators have relocated their businesses abroad, where they operate with fewer constraints. Some services that previously cooperated with Russian authorities have severed those ties and moved staff out of the country.
Read more →
Vulnerability assessment (computing)

Vulnerability assessment is a process of defining, identifying and classifying the security holes in information technology systems. An attacker can exploit a vulnerability to violate the security of a system. Some known vulnerabilities are Authentication Vulnerability, Authorization Vulnerability and Input Validation Vulnerability. == Purpose == Before deploying a system, it first must go through from a series of vulnerability assessments that will ensure that the build system is secure from all the known security risks. When a new vulnerability is discovered, the system administrator can again perform an assessment, discover which modules are vulnerable, and start the patch process. After the fixes are in place, another assessment can be run to verify that the vulnerabilities were actually resolved. This cycle of assess, patch, and re-assess has become the standard method for many organizations to manage their security issues. The primary purpose of the assessment is to find the vulnerabilities in the system, but the assessment report conveys to stakeholders that the system is secured from these vulnerabilities. If an intruder gained access to a network consisting of vulnerable Web servers, it is safe to assume that he gained access to those systems as well. Because of assessment report, the security administrator will be able to determine how intrusion occurred, identify compromised assets and take appropriate security measures to prevent critical damage to the system. == Assessment types == Depending on the system a vulnerability assessment can have many types and level. === Host assessment === A host assessment looks for system-level vulnerabilities such as insecure file permissions, application level bugs, backdoor and Trojan horse installations. It requires specialized tools for the operating system and software packages being used, in addition to administrative access to each system that should be tested. Host assessment is often very costly in term of time, and thus is only used in the assessment of critical systems. Tools like COPS and Tiger are popular in host assessment. === Network assessment === In a network assessment one assess the network for known vulnerabilities. It locates all systems on a network, determines what network services are in use, and then analyzes those services for potential vulnerabilities. This process does not require any configuration changes on the systems being assessed. Unlike host assessment, network assessment requires little computational cost and effort. == Vulnerability assessment vs penetration testing == Vulnerability assessment and penetration testing are two different testing methods. They are differentiated on the basis of certain specific parameters. == Regulatory requirements == Vulnerability assessments are mandated or strongly recommended by several regulatory frameworks. In the United States healthcare sector, the Health Insurance Portability and Accountability Act (HIPAA) Security Rule requires covered entities to conduct periodic evaluations of their security posture, and a December 2024 Notice of Proposed Rulemaking would explicitly require vulnerability scanning at least every six months for systems containing electronic protected health information. The Payment Card Industry Data Security Standard (PCI DSS) requires quarterly vulnerability scans for organizations that process credit card transactions, and the NIST Cybersecurity Framework includes vulnerability assessment as a core component of its Identify function.
Read more →
ISPConfig

ISPConfig is an open source hosting control panel for Linux, licensed under BSD license and developed by the company ISPConfig UG. The ISPConfig project was started in autumn 2005 by Till Brehm from the German company projektfarm GmbH. == Overview == Using the dashboard, administrators have the ability to manage websites, email addresses, MySQL and MariaDB as well as PostgreSQL (since version 3.3) databases, FTP accounts, Shell accounts and DNS records through a web-based interface. The software has 4 login levels: administrator, reseller, client, and email-user, each with a different set of permissions. == Operating Systems == ISPConfig is only available on Linux, with CentOS, Debian, and Ubuntu being among the supported distributions. == Features == The following services and features are supported: Management of a single or multiple servers from one control panel. Web server management for Apache HTTP Server and Nginx. Mail server management (with virtual mail users) with spam and antivirus filter using Postfix (software) and Dovecot (software). DNS server management (BIND, Powerdns). Configuration mirroring and clusters. Administrator, reseller, client and mail-user login. Virtual server management for OpenVZ Servers. Website statistics using Webalizer and AWStats
Read more →
SCADA Strangelove

SCADA Strangelove is an independent group of information security researchers founded in 2012, focused on security assessment of industrial control systems (ICS) and SCADA. == Activities == Main fields of research include: Discovery of 0-day vulnerabilities in cyber physical systems and coordinated vulnerability disclosure; Security assessment of ICS protocols and development suites; Identification of publicly Internet-connected ICS components and secure it with help of proper authorities; Development of security hardening guides for ICS software; Mapping cybersecurity on to functional safety; Awareness control and delivery of information regarding the actual security state of ICS systems. SCADA Strangelove's interests expand further than classic ICS components and covers various embedded systems, however, and encompass smart home components, solar panels, wind turbines, SmartGrid as well as other areas. == Projects == Group members have and continue to develop and publish numerous open source tools for scanning, fingerprinting, security evaluation and password bruteforcing for ICS devices. These devices work over industrial protocols such as modbus, Siemens S7, MMS, ISO EC 60870, ProfiNet. In 2014 Shodan used some of the published tools for building a map of ICS devices which is publicly available on the Internet. Open source security assessment frameworks, such as THC Hydra, Metasploit, and DigitalBond Redpoint have used Shodan-developed tools and techniques. The group has published security-hardening guidelines for industrial solutions based on Siemens SIMATIC WinCC and WinCC Flexible. The guidelines contain detailed security configuration walk-throughs, descriptions of internal security features and appropriate best practices. Among the group’s more noticeable projects is Choo Choo PWN (CCP) also named the Critical Infrastructure Attack (CIA). This is an interactive laboratory built upon ICS software and hardware used in real world. Every system is connected to a toy city infrastructure, which includes factories, railroads and other facilities. The laboratory has been demonstrated at various conferences including PHDays, Power of Community, and 30C3. Primarily the laboratory is used for the discovery of new vulnerabilities and for evaluation of security mechanisms, however it is also used for workshops and other educational activities. At Positive Hack Days IV, contestants found several 0-day vulnerabilities in Indusoft Web Studio 7.1 by Schneider Electric, and in specific ICS hardware RTU PET-7000 during the ICS vulnerability discovery challenge. The group supports Secure Open SmartGrid (SCADASOS) project to find and fix vulnerabilities in intellectual power grid components such as photovoltaic power station, wind turbine, power inverter. More than 80 000 industrial devices were discovered and isolated from the Internet in 2015. == Appearances == Group members are frequently seen presenting at conferences like CCC, SCADA Security Scientific Symposium, Positive Hack Days. Most notable talks are: === 29C3 === An overview of vulnerabilities discovered in the widely distributed Siemens SIMATIC WinCC software and tools that are implemented for searching ICS on the Internet. === PHDays === This talk consisted of an overview of vulnerabilities discovered in various systems produced by ABB, Emerson, Honeywell and Siemens and was presented at PHDays III and PHDays IV. === Confidence 2014 === Implications of security research aimed at realization of various industrial network protocols Profinet, Modbus, DNP3, IEC 61850-8-1 (MMS), IEC (International Electrotechnical Commission) 61870-5-101/104, FTE (Fault Tolerant Ethernet), Siemens S7. === PacSec 2014 === Presentations of security research showing the impact of radio and 3G/4G networks on the security of mobile devices as well as on industrial equipment. === 31C3 === Analysis of security architecture and implementation of the most wide spread platforms for wind and solar energy generation which produce many gigawatts of it. === 32C3 === Cybersecurity assessment of railway signaling systems such as Automatic Train Control (ATC), Computer-based interlocking (CBI) and European Train Control System (ETCS). === China Internet Security Conference 2016 === In "Greater China Cyber Threat Landscape" keynote by Sergey Gordeychik an overview of vulnerabilities, attacks and cyber-security incidents in Greater China region was presented. === Recon 2017 === In talk "Hopeless: Relay Protection for Substation Automation" by Kirill Nesterov and Alexander Tlyapov security analysis results of key Digital Substation component - Relay Protection Terminals was presented. Vulnerabilities, including remote code execution in Siemens SIPROTEC, General Electric Line Distance Relay, NARI and ABB protective relays was presented. == Philosophy == All names, catchwords and graphical elements refer to Stanley Kubrick’s film, Dr. Strangelove. In their talks, group members often refer to Cold War events such as the Caribbean Crisis, and draw parallels between nuclear arms race and the current escalation of cyberwar. Group members follow the approach of “responsible disclosure” and “ready to wait for years, while vendor is patching the vulnerability”. Public exploits for discovered vulnerabilities are not published. This is on account of the longevity of ICS and by implication the long process of patching ICS. However, conflicts still happen, notably in 2012 when the talk at DEF CON was called off due to a dispute of persistent weaknesses in Siemens industrial software.
Read more →
Screen space directional occlusion

Screen space directional occlusion (SSDO) is a computer graphics technique enhancing screen space ambient occlusion (SSAO) by taking direction into account to sample the ambient light (both the light coming directly at an object, as well as the light reflected off of the object directly behind it), to better approximate global illumination. SSDO was introduced by Tobias Ritschel, Thorsten Grosch, and Hans-Peter Seidel in their 2009 ACM Symposium on Interactive 3D Graphics and Games paper Approximating dynamic global illumination in image space, which describes it as extending SSAO to directional occlusion with one diffuse indirect bounce of light; later literature notes that SSDO still suffers from common screen-space artifacts such as noise and banding. == Method == The original SSDO paper describes a two-pass screen-space approach, with one pass for direct lighting and a second pass for indirect bounces. Later literature describes SSDO as assuming a general shadowing direction that allows color bleeding and a single light bounce.
Read more →
Resilience week

Resilience week is an annual symposium established to enable cross-disciplinary and role based discussions to advance strategies and research that engenders resilience in critical infrastructure systems and communities. Damaging storms, cyber attack and the interconnection of critical infrastructure systems can lead to cascading events that not only affect local but also across regions. However, many of these interdependencies are not easily recognized and obscure and complicate the mitigation of risk. The purpose of the symposia series is hence to facilitate best practice in managing critical infrastructure risks, by bringing together businesses, government and researchers. == Background == Originally organized in 2008 as a focus on the new research area of resilient control systems, including the disciplinary areas of control system, cyber-security, cognitive psychology and any number of critical infrastructure domains. Resilience has long been recognized as an area that requires not only the contributions of multiple disciplines or multidisciplinary participation, but interdisciplinary interaction where there is a common language and familiarity of the contributors to what other disciplines (and roles) contribute. The resulting interactions developed by Resilience Week and associated activities are intended to culture this sharing environment as a safe zone for inclusion; more importantly, an environment that lends to developing the new science and practice. As the attributes of resilience are complex, the contributions and topics for the event have included both the disciplinary and the project considerations, in keynotes, panels and research presentations. Keynotes have included senior leadership in the Department of Energy, Department of Defense, Department of Homeland Security, the National Science Foundation, and other agencies in addition to National Academy and professional organization fellows and senior industry leaders. Project panels and research presentations include emergent topics in resilience to climate change, cyber attack, damaging storms and the energy assurance. Topics Areas of focus have included: Control Systems Cyber Systems Cognitive Systems Communications Systems Communities and Infrastructure Project Focus Areas have included: Dependencies and Interdependencies Cyber Resilience for Operating Technology Commercializing Research and Development Building Critical Infrastructure Resilience through Distributed Energy Resources Energy Equity and Community Resilience Proceedings are developed for each year of the event, documenting the diversity of the research and engagements within these topical areas. == Impacts for the future == Since its inception, the Resilience Week community has evolved from one that primarily included only university researchers to one that includes many government laboratories, universities and private industries in the US and internationally. This type of collaboration forms a feedback loop that informs the research with the current needs and hones best practices. The future of the event is to further advance discussions that advance investment, recognize priorities and expedite technologies and tools to proactively address our energy future, in light of the natural and manmade challenges, and rationalizing the complex relationships that exist in critical infrastructure.
Read more →
Shape analysis (digital geometry)

This article describes shape analysis to analyze and process geometric shapes. == Description == Shape analysis is the (mostly) automatic analysis of geometric shapes, for example using a computer to detect similarly shaped objects in a database or parts that fit together. For a computer to automatically analyze and process geometric shapes, the objects have to be represented in a digital form. Most commonly a boundary representation is used to describe the object with its boundary (usually the outer shell, see also 3D model). However, other volume based representations (e.g. constructive solid geometry) or point based representations (point clouds) can be used to represent shape. Once the objects are given, either by modeling (computer-aided design), by scanning (3D scanner) or by extracting shape from 2D or 3D images, they have to be simplified before a comparison can be achieved. The simplified representation is often called a shape descriptor (or fingerprint, signature). These simplified representations try to carry most of the important information, while being easier to handle, to store and to compare than the shapes directly. A complete shape descriptor is a representation that can be used to completely reconstruct the original object (for example the medial axis transform). == Application fields == Shape analysis is used in many application fields: archeology for example, to find similar objects or missing parts architecture for example, to identify objects that spatially fit into a specific space medical imaging to understand shape changes related to illness or aid surgical planning virtual environments or on the 3D model market to identify objects for copyright purposes security applications such as face recognition entertainment industry (movies, games) to construct and process geometric models or animations computer-aided design and computer-aided manufacturing to process and to compare designs of mechanical parts or design objects. == Shape descriptors == Shape descriptors can be classified by their invariance with respect to the transformations allowed in the associated shape definition. Many descriptors are invariant with respect to congruency, meaning that congruent shapes (shapes that could be translated, rotated and mirrored) will have the same descriptor (for example moment or spherical harmonic based descriptors or Procrustes analysis operating on point clouds). Another class of shape descriptors (called intrinsic shape descriptors) is invariant with respect to isometry. These descriptors do not change with different isometric embeddings of the shape. Their advantage is that they can be applied nicely to deformable objects (e.g. a person in different body postures) as these deformations do not involve much stretching but are in fact near-isometric. Such descriptors are commonly based on geodesic distances measures along the surface of an object or on other isometry invariant characteristics such as the Laplace–Beltrami spectrum (see also spectral shape analysis). There are other shape descriptors, such as graph-based descriptors like the medial axis or the Reeb graph that capture geometric and/or topological information and simplify the shape representation but can not be as easily compared as descriptors that represent shape as a vector of numbers. From this discussion it becomes clear, that different shape descriptors target different aspects of shape and can be used for a specific application. Therefore, depending on the application, it is necessary to analyze how well a descriptor captures the features of interest.
Read more →
Site Security Handbook

The Site Security Handbook, RFC 2196, is a guide on setting computer security policies and procedures for sites that have systems on the Internet (however, the information provided should also be useful to sites not yet connected to the Internet). The guide lists issues and factors that a site must consider when setting their own policies. It makes a number of recommendations and provides discussions of relevant areas. This guide is only a framework for setting security policies and procedures. In order to have an effective set of policies and procedures, a site will have to make many decisions, gain agreement, and then communicate and implement these policies. The guide is a product of the IETF SSH working group, and was published in 1997, obsoleting the earlier RFC 1244 from 1991.
Read more →
Key frame

In animation and filmmaking, a key frame (or keyframe) is a drawing or shot that defines the starting and ending points of a smooth transition. These are called frames because their position in time is measured in frames on a strip of film or on a digital video editing timeline. A sequence of key frames defines which movement the viewer will see, whereas the position of the key frames on the film, video, or animation defines the timing of the movement. Because only two or three key frames over the span of a second do not create the illusion of movement, the remaining frames are filled with "inbetweens". == Use of key frames as a means to change parameters == In software packages that support animation, especially 3D graphics, there are many parameters that can be changed for any one object. One example of such an object is a light. In 3D graphics, lights function similarly to real-world lights. They cause illumination, cast shadows, and create specular highlights. Lights have many parameters, including light intensity, beam size, light color, and the texture cast by the light. Supposing that an animator wants the beam size to change smoothly from one value to another within a predefined period of time, that could be achieved by using key frames. At the start of the animation, a beam size value is set. Another value is set for the end of the animation. Thus, the software program automatically interpolates the two values, creating a smooth transition. == Video editing == In non-linear digital video editing, as well as in video compositing software, a key frame is a frame used to indicate the beginning or end of a change made to a parameter. For example, a key frame could be set to indicate the point at which audio will have faded up or down to a certain level. == Video compression == In video compression, a key frame, also known as an intra-frame, is a frame in which a complete image is stored in the data stream. In video compression, only changes that occur from one frame to the next are stored in the data stream, in order to greatly reduce the amount of information that must be stored. This technique capitalizes on the fact that most video sources (such as a typical movie) have only small changes in the image from one frame to the next. Whenever a drastic change to the image occurs, such as when switching from one camera shot to another or at a scene change, a key frame must be created. The entire image for the frame must be output when the visual difference between the two frames is so great that representing the new image incrementally from the previous frame would require more data than recreating the whole image. Because video compression only stores incremental changes between frames (except for key frames), it is not possible to fast-forward or rewind to any arbitrary spot in the video stream. That is because the data for a given frame only represents how that frame was different from the preceding one. For that reason, it is beneficial to include key frames at arbitrary intervals while encoding video. For example, a key frame may be output once for each 10 seconds of video, even though the video image does not change enough visually to warrant the automatic creation of the key frame. That would allow seeking within the video stream at a minimum of 10-second intervals. The downside is that the resulting video stream will be larger in disk size because many key frames are added when they are not necessary for the frame's visual representation. This drawback, however, does not produce significant compression loss when the bitrate is already set at a high value for better quality (as in the DVD MPEG-2 format).
Read more →