AI Face Kissing Free Online

AI Face Kissing Free Online — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  NASA AI Assisted-Air Quality Monitoring Project

  The NASA Expert-System Ion Trap Mass Spectrometer (ES-ITMS) Project was a public-private partnership to develop an artificial intelligence assisted, air quality monitoring system and was qualified for use on the Space Shuttle. The partnership was also the first cost and intellectual property shared public-partnership implemented by NASA, which used the commercial Research and Development Limited Partnership (RDLP) model that had been adopted by the Reagan Administration for Department of Defense semiconductor development, and recommended for use by NASA for space commercialization. The project partners included NASA, the University of Florida and Finnigan MAT Corporation, was organized and administered by the NASA Joint Enterprise Institute (subsequently NASA Joint Sponsored Program) and ran from 1988 through 1990. The partnership concluded final testing in 1991, generating four patents, expert system software and application protocol reports. The system was space qualified for use on the Shuttle and elements of the ES-ITMS system were integrated into the product Improvements for Finnigan MAT corporation. The success of the partnership lead NASA to create a pilot program to develop partnership business models as an ongoing management practice. == Purpose and objectives == The need to monitor air quality in confined spaces represented an increasing challenge for NASA's planned space missions and private sector facility managers facing the increased scrutiny of possible air contaminants. Up to the early 1980's, air quality monitors generally required large spaces and human technicians to interpret readings. This created a need for miniaturized air quality monitors that could generate reliable and accurate analytic results without on-site technician presence. NASA initiated projects to develop..."mobile and/or portable mass spectrometers" that evaluated the "tradeoff between instrumentation capabilities and space, weight and power considerations." NASA selected a "commercial ITMS instrument capable of generating electron ionization, chemical ionization and mass spectrometry data", to develop a linked expert system to accomplish analysis without human intervention. The commercial instrumentation was from Finnigan MAT corporation while the scientific expertise to support expert system development was available at the University of Florida. The project managers at NASA Ames created a single, integrated project using the RDLP model with objectives to: Develop AI/expert system software for instrument control (NASA's role) Expand sensitivity, selectivity and speed of the spectrometer (Univ Florida role) Expand the spectrometer analytic capability and automate the screening (Finnigan role) == Membership == The partnership included seven specialists from five member organizations: Federal Government National Aeronautics and Space Administration (NASA) NASA Ames Research Center (ARC) NASA Kennedy Space Center (KSC) Commercial Finnigan MAT Corporation (Thermo-Fisher Scientific) TGS Technology, Inc. Research Management University of Florida == Organization, management and administration == The technical project was organized into two development teams, one located in at the NASA Ames Research Center covering expert systems and analytic capabilities and one in Florida covering improved sensitivity and testing. The partnership management and administration was provided by a non-profit, partnership support organization: the Joint Enterprise Institute operating through San Francisco State University Foundation (SFSUF) with a NASA employee liaison, Syed Shariq. == Public-private partnership == The partnership structure was as a prototype test of a pilot NASA program to develop public-private partnership business models. The pilot program was known as the NASA Joint Sponsored Research Program (JSRP), which operated as the NASA Joint Enterprise Institute between 1988 and 1991. The partnership was the first public-private, research and development partnership implemented by NASA in response to national policy shifts to increase technology transfer and space commercialization. The partnership structure included a two year technology development and testing plan that cost $610,000, of which NASA funded $310,000, Finnigan $175,000 and the University of Florida $95,000. == Results and commercialization == The project generated patents (4), software (2) and application protocol reports (8). NASA gained use of the patents and jointly development software while Finnigan received commercial utilization rights. The results were commercialized within eighteen months of project completion. == Recognition == NASA recognized the project as a space qualified instrument. Its achievements were reported to the NASA Administrator, directly leading to establishment of the agency-wide Joint Sponsored Research Program.

  Read more →
• 

  Spatial computing

  Spatial computing refers to 3D human–computer interaction techniques that are perceived by users as taking place in the real world, in and around their bodies and physical environments, instead of constrained to and perceptually behind computer screens or in purely virtual worlds. This concept inverts the long-standing practice of teaching people to interact with computers in digital environments, and instead teaches computers to better understand and interact with people more naturally in the human world. This concept overlaps with and encompasses others including extended reality, augmented reality, mixed reality, natural user interface, contextual computing, affective computing, and ubiquitous computing. The usage for labeling and discussing these adjacent technologies is imprecise. Spatial computing devices include sensors—such as RGB cameras, depth cameras, 3D trackers, inertial measurement units, or other tools—to sense and track nearby human bodies (including hands, arms, eyes, legs, mouths) during ordinary interactions with people and computers in a 3D space. They further use computer vision to attempt to understand real world scenes, such as rooms, streets or stores, to read labels, to recognize objects, create 3D maps, and more. Quite often they also use extended reality and mixed reality to superimpose virtual 3D graphics and virtual 3D audio onto the human visual and auditory system as a way of providing information more naturally and contextually than traditional 2D screens. Spatial computing often refers to personal computing devices like headsets and headphones, but other human-computer interactions that leverage real-time spatial positioning for displays, like projection mapping or cave automatic virtual environment displays, can also be considered spatial computing if they leverage human-computer input for the participants. == History == The term "spatial computing" apparently originated in the field of GIS around 1985 or earlier to describe computations on large-scale geospatial information. Early examples of spatial computing in GIS include ArcInfo and its iterations, initially released in 1981, a part of ArcGIS along with ArcEditor, which together provide mapping, analysis, editing, and geoprocessing for geodatabases. This is somewhat related to the modern use, but on the scale of continents, cities, and neighborhoods. Modern spatial computing is more centered on the human scale of interaction, around the size of a living room or smaller. But it is not limited to that scale in the aggregate. In the early 1990s, as field of virtual reality was beginning to be commercialized beyond academic and military labs, a startup called Worldesign in Seattle used the term Spatial Computing to describe the interaction between individual people and 3D spaces, operating more at the human end of the scale than previous GIS examples may have contemplated. The company built a CAVE-like environment it called the Virtual Environment Theater, whose 3D experience was of a virtual flyover of the Giza Plateau, circa 3000 BC. Robert Jacobson, CEO of Worldesign, attributes the origins of the term to experiments at the Human Interface Technology Lab, at the University of Washington, under the direction of Thomas A. Furness III. Jacobson was a co-founder of that lab before spinning off this early VR startup. In 1997, an academic publication by T. Caelli, Peng Lam, and H. Bunke called "Spatial Computing: Issues in Vision, Multimedia and Visualization Technologies" introduced the term more broadly for academic audiences, focusing on a variety of topics such as image processing, dead reckoning navigation, object recognition, and visualizing spatial data. The specific term "spatial computing" was later referenced again in 2003 by Simon Greenwold, as "human interaction with a machine in which the machine retains and manipulates referents to real objects and spaces". MIT Media Lab alumnus John Underkoffler gave a TED talk in 2010 giving a live demo of the multi-screen, multi-user spatial computing systems being developed by Oblong Industries, which sought to bring to life the futuristic interfaces conceptualized by Underkoffler in the films Minority Report and Iron Man. Google Earth, initially released by Keyhole Inc. in 2001 and re-released by Google in 2005 can be considered a capable GIS and includes advanced geospatial tools and capabilities. == Notable instances of the use of spatial computing == In 2019, Microsoft HoloLens released a video outlining Airbus' partnership with Microsoft Azure to utilize the latter's mixed reality services for streamlining and improving the aircraft design process, as well as reducing the error in development. Airbus utilized the HoloLens 2 to this end, and the executive vice president of engineering claimed that their design process' validation phases were "hugely accelerated by 80 percent", as well as "strongly believe[d]" that up to 30% improvements in their industrial tasks could be attained with the HoloLens 2. During the presentational video, Airbus cited the maturity of Microsoft Azure services as "key" for their usage of the HoloLens 2. Also in 2019, the U.S. army partnered with Microsoft to produce a HoloLens based Integrated Visual Augmentation System (IVAS) to enhance infantry members by giving troops various abilities, including but not limited to using holographs to train, projecting 3D maps into their vision, and seeing through smoke and corners. Microsoft received tens of thousands of hours of feedback for their systems by 2021. Sergeant Marc Krugh at the time claimed that Microsoft's partnership has already caused the army to rethink some of its troops' operation strategy. == Products == === Apple Vision Pro === Apple announced Apple Vision Pro, a device it markets as a "spatial computer", on June 5, 2023. It includes several features such as Spatial Audio, two 4K micro-OLED displays, the Apple R1 chip and eye tracking, and released in the United States on February 2, 2024. In announcing the platform, Apple invoked its history of popularizing 2D graphical user interfaces that supplanted prior human-computer interface mechanisms such as the command line. Apple suggests the introduction of spatial computing as a new category of interactive device, on the same level of importance as the introduction of the 2D GUI. Apple Vision Pro runs on a new operating system called visionOS, which combines eye tracking, gesture recognition, and voice input to enable immersive interaction without physical controllers. The platform is aimed at productivity, entertainment, collaboration, and enterprise use cases. === Magic Leap === Magic Leap had also previously used the term “spatial computing” to describe its own devices. Its first headset, the Magic Leap 1, was released on August 8, 2018. Magic Leap’s technology enables the display of content into the real world using an optical see-through head-mounted display, which projects an overlay of a virtual world into the user’s field of view. This allows for an experience where the physical and digital worlds are perceived simultaneously. === Microsoft Hololens === On February 24, 2019, Microsoft released the HoloLens 2, which includes mixed reality tools and can generate interactable, manipulatable holograms in 3D space. The holograms in question can be related to a physical object or completely independent and free-floating. The Azure Spatial Anchors cloud service was released simultaneously, which gives the holograms capability to persist across time and many individuals' devices. === Meta Quest === The Meta Quest 3, a mixed reality gaming headset that includes spatial audio, two color cameras, and grants the ability to interact with virtual characters released on October 9, 2023, at a notably cheaper price than the Apple Vision Pro, but with reduced capabilities. === Snap Spectacles === Spectacles (product) are augmented reality glasses developed by Snap Inc.. The latest generation includes a 46-degree stereoscopic display, adjustable tint, and Snapdragon processors. Spectacles allow users to interact with a collection of augmented reality experiences designed for education, entertainment, and utility. Currently, the device is in the hands of selected developers and creators, as part of an experimental AR ecosystem focused on creativity, use case exploration and expression.

  Read more →
• 

  Documentation science

  Documentation science is the study of the recording and retrieval of information. It includes methods for storing, retrieving, and sharing of information captured on physical as well as digital documents. This field is closely linked to the fields of library science and information science but has its own theories and practices. The term documentation science was coined by Belgian lawyer and peace activist Paul Otlet. He is considered to be the forefather of information science. He along with Henri La Fontaine laid the foundations of documentation science as a field of study. Professionals in this field are called documentalists. Over the years, documentation science has grown to become a large and important field of study. Evolving from traditional practices like archiving and retrieval to modern theories about the nature of documents, novel methods for organizing digital information, and applications in libraries, research, healthcare, business, and technology and more. This field continues to evolve in the digital age. == Developments in documentation science == 1895: The International Institute of Bibliography (originally Institut International de Bibliographie, IIB) was established on 12 September 1895, in Brussels, Belgium by Paul Otlet and Henri La Fontaine. It aimed to catalog all recorded knowledge using a universal classification system now known as the Universal Decimal Classification (UDC). 1931: International Institute of Bibliography (originally Institut International de Bibliographie, IIB) was renamed The International Institute for Documentation, (Institut International de Documentation, IID). 1934: Paul Otlet envisioned a “radiated library,” a global network of interconnected documents accessible from anywhere via telecommunication. This early idea is now seen as a forerunner of the internet. 1937: American Documentation Institute was founded (1968 nameshift to American Society for Information Science). 1951: Suzanne Briet published Qu'est-ce que la documentation? where she proposed that “a document is evidence in support of a fact,” expanding the definition to include objects such as animals in zoos when they are part of a scientific study. This was a significant theoretical shift in defining documents. 1965-1990: Documentation departments were established, for example, large research libraries, online computer retrieval systems and more. The persons doing the searches were called documentalists. But with the appearance of first CD-ROM databases in the mid-1980s and later the internet in 1990s, these intermediary searches decreased and most such departments closed or merged with other departments. 1996: "Dokvit", Documentation Studies, was established in 1996 at the University of Tromsø in Norway. 2001: The Document Academy was established. It is an international network that celebrates documentation. It was conducted by The Program of Documentation Studies, University of Tromsø, Norway and The School of Information Management and Systems, UC Berkeley. 2003: The first Document Research Conference (DOCAM), a series of conferences made by the Document Academy. DOCAM '03 (2003) was held 13–15 August 2003 at The School of Information Management and Systems (SIMS) at the University of California, Berkeley. 2007: Michael Buckland, Ronald Day, and Birger Hjørland expanded the theoretical foundations of documentation science. They researched and explored documents to be social artifacts, the role of ideology in classification, and how documents influenced knowledge systems. 2010s: The concept of post-documentation or “documentality” began in the 2010s, which focused on how digital traces (e.g., tweets, logs) function as documents without traditional physical form. This led to new thinking in document theory. 2016–present: The Document Academy's DOCAM conferences have continued, offering ongoing developments in the theory and practice of documentation. Themes include affect, memory, activism, and born-digital records. 2017: The journal Information Research published special issues addressing “document theory,” including views on documentation in virtual environments and digital archives. 2020–present: The growth of research data management (RDM) and open science has made documentation practices central to data sharing, metadata standards, and reproducibility in scientific work. == Theoretical foundations == Documentation science has some deep theories that explain what a document is, how people use documents, and how they are organized. These concepts were introduced by scholars who have not only studied libraries, but also philosophy, language, and social sciences. Suzanne Briet described a document as “any material form of evidence” that is made to be used as proof or to share information. An antelope in a zoo, for example, can be a document because it is being studied, classified, and described. Documents are not just things or materials but are also shaped by society. Michael Buckland noted that documents have meaning only when people agree they are useful or valid as information. He explained a document becomes a document when someone decides to use it as evidence. Ronald Day wrote about how documentation is not neutral, it can be influenced by power, ideology, and politics. He claimed that classification systems, like how libraries organize books, are not just technical tools. They also show what kinds of knowledge are seen as more important than others. In recent years, new theories have been introduced, like “documentality” by Maurizio Ferraris. He proposed that a document does not have to be a paper or file, it can also be something digital like a tweet, a database entry, or a log file, as long as it leaves a trace that can be looked at later. This theory helps explain modern digital documents. == Methodologies and practice == Documentation science includes many methods that help people collect, organize, store, and find information. These practices are used in libraries, archives, research labs, companies, and now also in online systems. === Collecting and creating documents === In the past, documentation work included gathering books, articles, reports, and other printed materials. People created records of these materials manually, using catalog cards, indexes, or bibliographies. Paul Otlet’s work with the Universal Bibliographic Repertory is one example. He created millions of card entries to organize knowledge from around the world. Today, documents are not only created by humans. Computers and machines also generate documents, like log files, metadata, and sensor data. These need new tools and methods for collection and management. === Organizing information === Organizing documents has always been a foundational element of documentation science. Methods like classification (dividing things into groups) and indexing (making lists of topics or keywords) help individuals find what they need. A widely used system is the Universal Decimal Classification (UDC) developed by Otlet and La Fontaine. Another is the Library of Congress Classification (LCC) used in the majority of U.S. libraries. Indexing can be performed by humans or by software programs that read the text and add tags to documents. Metadata is also used to describe documents. Metadata is “data about data” like the title, author, date, and subject of a document. Standards like Dublin Core are used in digital libraries to keep metadata consistent. === Retrieval and access === One of the main objectives of documentation is helping users find the right document. This is called information retrieval. In the past, this meant using catalog drawers or printed indexes. Today, people use search engines, databases, and digital libraries. Modern retrieval tools use Boolean logic, ranking algorithms, and sometimes machine learning to show the most useful results first. This is part of what is studied in both documentation science and information retrieval. === Preservation and archiving === Documents require long-term storage. This is called preservation of documents. Printed documents can be damaged by light, pests, or even time on the other hand digital documents can be deemed worthless if formats become outdated or storage facilities fail. Archivists use methods like migration, which includes moving files to new formats, and emulation, which replicates obsolete systems, to preserve materials. These methods and tools are ever changing as new technologies develop. But the main objective of documentation has remained the same, which is to keep information safe, organized, and easy to find. == Documentation in the digital age == With the expansion of the internet, computers, and cloud storage, documents are no longer just books, papers, or reports. They can now be emails, tweets, videos, websites, databases, or even log files created by machines. === Born-digital documents === Many documents today are created directly in digital form. These are called born-digit

  Read more →
• 

  NCSA Brown Dog

  NCSA Brown Dog is a research project to develop a method for easily accessing historic research data stored in order to maintain the long-term viability of large bodies of scientific research. It is supported by the National Center for Supercomputing Applications (NCSA) that is funded by the National Science Foundation (NSF). == History == Brown Dog is part of the DataNet partners program funded by NSF in 2008. DataNet was conceived to address the increasingly digital and data-intensive nature of science, engineering and education. Brown Dog is part of a follow-on effort called Data Infrastructure Building Blocks (DIBBs), focused on building software to support DataNet. The project was proposed by researchers at NCSA and the University of Illinois Urbana-Champaign as well as researchers from Boston University and the University of North Carolina at Chapel Hill. == Unstructured, uncurated, long tail data == Much scientific data is smaller, unstructured and uncurated and thus not easily shared. Such data is sometimes referred to as "long tail" data. This borrows a term from statistics and refers to the tail of the distribution of project sizes. The majority of smaller projects lack the resources to properly steward the data they produce. This so-called "long tail" data, both past and present, has the potential to inform future research in many study areas. Much of this data has become inaccessible due to obsolete software and file formats. The resulting impossibility of reviewing data from older research disrupts the overall scientific research project. == Approach == Brown Dog describes itself as the "super mutt" of software (thus the name "Brown Dog"), serving as a low-level data infrastructure to interface digital data content across the internet. Its approach is to use every possible source of automated help (i.e., software) in existence in a robust and provenance-preserving manner to create a service that can deal with as much of this data as possible. The project sees the broader impact of its work in its potential to serve the general public as a sort of "DNS for data", with the goal of making all data and all file formats as accessible as webpages are today. == Technology == Brown Dog seeks to address problems involving the use of uncurated and unstructured data collections through the development of two services: the Data Access Proxy (DAP) to aid in the conversion of file formats and the Data Tilling Services (DTS) for the automatic extraction of metadata from file contents. Once developed, researchers and general public users will be able to download browser plugins and other tools from the Brown Dog tool catalog. === Data Tilling Service === Data Tilling Service (DTS) will allow users to search data collections using an existing file to discover other similar files in a collection. A DTS search field will be appended to configured browsers where example files can be dropped. This tells DTS to search all the files under a given URL for files similar to the dropped file. For example, while browsing an online image collection, a user could drop an image of three people into the search field, and the DTS would return all images in the collection that also contain three people. If DTS encounters a foreign file format, it will utilize DAP to make the file accessible. DTS also indexes the data and extract and appends metadata to files and collections enabling users to gain some sense of the type of data they are encountering. This service runs on port 9443. === Data Access Proxy === Data Access Proxy (DAP) allows users to access data files that would otherwise be unreadable. Similar to an internet gateway or Domain Name Service, the DAP configuration would be entered into a user's machine and browser settings. Data requests over HTTP would first be examined by DAP to determine if the native file format is readable on the client device. If not, DAP converts the file into the best available format readable by the client machine. Alternatively, the user could specify the desired format themselves. This service runs on port 8184. == Use cases == Brown Dog targets three use cases proposed by groups within the EarthCube research communities. Developers and researchers from these communities will work together on use cases that span geoscience, engineering, biology and social science. === Long tail vegetation data in ecology and global change biology === This use case is led by Michael Dietze, Boston University Data on the abundance, species composition, and size structure of vegetation is critically important for a wide array of sub-disciplines in ecology, conservation, natural resource management, and global change biology. However, addressing many of the pressing questions in these disciplines will require that terrestrial biosphere and hydrologic models are able to assimilate the large amount of long-tail data that exists but is largely inaccessible. The Brown Dog team in cooperation with researches from Dietze's lab will facilitate the capture of a huge body of smaller research-oriented vegetation data sets collected over many decades and historical vegetation data embedded in Public Land Survey data dating back to 1785. This data will be used as initial conditions for models, to make sense of other large data sets and for model calibration and validation. === Designing green infrastructure considering storm water and human requirements === This use case is led by Barbara Minsker], University of Illinois at Urbana-Champaign]; William Sullivan, University of Illinois at Urbana-Champaign; Arthur Schmidt, University of Illinois at Urbana-Champaign. This case study involves developing novel green infrastructure design criteria and models that integrate requirements for storm water management and ecosystem and human health and well being. To address the scientific and social problems associated with the design of green spaces, data accessibility and availability is a major challenge. This study will focus on identified areas of the Green Healthy Neighborhood Planning region within the City of Chicago where existing local sewer performance is most deficient and where changes in impervious area through green infrastructure would be beneficial to under served neighborhoods. Brown Dog will be used to extract long-tail experimental data on human landscape preferences and health impacts. This data will be used to develop a human health impacts model that will then be linked together with a terrestrial biosphere model and a storm water model using Brown Dog technology. === Development and application for critical zone studies === This use case is led by Praveen Kumar, University of Illinois at Urbana-Champaign Critical Zone (CZ) is the "skin" of the earth that extends from the treetops to the bedrock that is created by life processes working at scales from microbes to biomes. The Critical Zone supports all terrestrial living systems. Its upper part is the bio-mantle. This is where terrestrial biota live, reproduce, use and expend energy, and where their wastes and remains accumulate and decompose. It encompasses the soil, which acts as a geomembrane through which water and solutes, energy, gases, solids, and organisms interact with the atmosphere, biosphere, hydrosphere, and lithosphere. A variety of drivers affect this bio-dynamic zone, ranging from climate and deforestation to agriculture, grazing and human development. Understanding and predicting these effects is central to managing and sustaining vital ecosystem services such as soil fertility, water purification, and production of food resources, and, at larger scales, global carbon cycling and carbon sequestration. The CZ provides a unifying framework for integrating terrestrial surface and near-surface environments, and reflects an intricate web of biological and chemical processes and human impacts occurring at vastly different temporal and spatial scales. The nature of these data create significant challenges for inter-disciplinary studies of the CZ because integration of the variety and number of data products and models has been a barrier. On the other hand, CZ data provides an excellent opportunity for defining, testing and implementing Brown Dog technologies. In this context "unstructured" data is viewed broadly as consisting of a collection of heterogeneous data with formats that reflect temporal and disciplinary legacies, data from emerging low cost open hardware based sensors and embedded sensor networks that lack well defined metadata and sensor characteristics, as well as data that are available as maps, images and text. == NSF Award == CIF21 DIBBs: Brown Dog was awarded in the winter of 2013 with a start date of October 1, 2013. Estimated expiration date is September 30, 2018. The award amount was $10,519,716.00, the largest DIBB award. The principal investigator is Kenton McHenry of NCSA at the University of Illinois at Urbana-Champaign. Coleaders are Jong Lee NCSA/UIU

  Read more →
• 

  AI agent

  In the context of generative artificial intelligence, AI agents (also referred to as compound AI systems or agentic AI) are a class of intelligent agents that can pursue goals, use tools, and take actions with varying degrees of autonomy. In practice, they usually operate within human-defined objectives, constraints, and available tools. == Overview == AI agents possess several key attributes, including goal-directed behavior, natural language interfaces, the capacity to use external tools, and the ability to perform multi-step tasks. Their control flow is frequently driven by large language models (LLMs). Agent systems may also include memory components, planning logic, tool interfaces, and orchestration software for coordinating agent components. AI agents do not have a standard definition. NIST describes agentic AI as an emerging area requiring standards for secure operation, interoperability, and reliable interaction with external systems. A common application of AI agents is task automation: for example, booking travel plans based on a user's prompted request. Companies such as Google, Microsoft and Amazon Web Services have offered platforms for deploying pre-built AI agents. Several protocols have been proposed for standardizing inter-agent communication, with examples including the Model Context Protocol, Gibberlink, and many others. Some of these protocols are also used for connecting agents to external applications. In December 2025, Linux Foundation announced the formation of the Agentic AI Foundation (AAIF), with the goal of ensuring agentic AI evolves transparently and collaboratively. == History == AI agents have been traced back to research from the 1990s, with Harvard professor Milind Tambe noting that the definition of an AI agent was not clear at the time. Researcher Andrew Ng has been credited with spreading the term "agentic" to a wider audience in 2024. == Training and testing == Researchers have attempted to build world models and reinforcement learning environments to train or evaluate AI agents. For example, video games such as Minecraft and No Man's Sky as well as replicas of company websites, have also been used for training such agents. == Autonomous capabilities == The Financial Times compared the autonomy of AI agents to the SAE classification of self-driving cars, likening most applications to level 2 or level 3, with some achieving level 4 in highly specialized circumstances, and level 5 being theoretical. == Cognitive architecture == The following are some internal design options for reasoning within an agent: Retrieval-augmented generation ReAct (Reason + Act) pattern is an iterative process in which an AI agent alternates between reasoning and taking actions, receives observations from the environment or external tools, and integrates these observations into subsequent reasoning steps. Reflexion, which uses an LLM to create feedback on the agent's plan of action and stores that feedback in a memory cache. A tool/agent registry, for organizing software functions or other agents that the agent can use. One-shot model querying, which queries the model once to create the plan of action. === Reference architecture === Ken Huang proposed an AI agent reference architecture, which consists of seven interconnected layers, with each layer building on the functionality of the layers beneath it: Layer 1: Foundation models - provide the core AI engines to power agent capabilities. Layer 2: Data operations - manage the complex data infrastructure required for AI agent operations, including Vector database, data loaders, RAG. Layer 3: Agent frameworks - sophisticated software and tools that simplify the development and management of the AI agents. Layer 4: Deployment and infrastructure - provide the robust technical foundation for running AI agents. Layer 5: Evaluation and observability - focus on assessing the safety and performance of AI agents. Layer 6: Security and compliance - a crucial protective framework ensuring AI agents operate safely, securely, and conform to regulatory boundaries. At this layer security and compliance features embedded into all the AI agent stack layers are integrated together. Layer 7: Agent ecosystem - represents the AI agents' interface with real-world applications and users. == Orchestration patterns == To execute complex tasks, autonomous agents are often integrated with other agents or specialized tools. These configurations, known as orchestration patterns or workflows, include the following: Prompt chaining: A sequence where the output of one step serves as the input for the next. Routing: The classification of an input to direct it to a specialized downstream task or tool. Parallelization: The simultaneous execution of multiple tasks. Sequential processing: A fixed, linear progression of tasks through a predefined pipeline. Planner-critic: An iterative pattern where one agent generates a proposal and another evaluates it to provide feedback for refinement. == Multimodal AI agents == In addition to large language models (LLMs), vision-language models (VLMs) and multimodal foundation models can be used as the basis for agents. In September 2024, Allen Institute for AI released an open-source vision-language model. Nvidia released a framework for developers to use VLMs, LLMs and retrieval-augmented generation for building AI agents that can analyze images and videos, including video search and video summarization. Microsoft released a multimodal agent model – trained on images, video, software user interface interactions, and robotics data – that the company claimed can manipulate software and robots. == Applications == As of April 2025, per the Associated Press, there are few real-world applications of AI agents. As of June 2025, per Fortune, many companies are primarily experimenting with AI agents. The Information divided AI agents into seven archetypes: business-task agents, for acting within enterprise software; conversational agents, which act as chatbots for customer support; research agents, for querying and analyzing information (such as OpenAI Deep Research); analytics agents, for analyzing data to create reports; software developer or coding agents (such as Cursor); domain-specific agents, which include specific subject matter knowledge; and web browser agents (such as OpenAI Operator). By mid-2025, AI agents have been used in video game development, gambling (including sports betting), cryptocurrency wallets (including cryptocurrency trading and meme coins) and social media. In August 2025, New York Magazine described software development as the most definitive use case of AI agents. Likewise, by October 2025, noting a decline in expectations, The Information noted AI coding agents and customer support as the primary use cases by businesses. In November 2025, The Wall Street Journal reported that few companies that deployed AI agents have received a return on investment. === Applications in government === Several government bodies in the United States and United Kingdom have deployed or announced the deployment of agents, at the local and national level. The city of Kyle, Texas deployed an AI agent from Salesforce in March 2025 for 311 customer service. In November 2025, the Internal Revenue Service stated that it would use Agentforce, AI agents from Salesforce, for the Office of Chief Counsel, Taxpayer Advocate Services and the Office of Appeals. That same month, Staffordshire Police announced that they would trial Agentforce agents for handling non-emergency 101 calls in the United Kingdom starting in 2026. In December 2025, the Department of Neighborhoods in Detroit, Michigan, in partnership with a local business, deployed a pilot project in two Detroit districts for an AI agent to be used for customer service calls. In February 2025, Thomas Shedd, the director of the Technology Transformation Services, proposed using AI coding agents across the United States federal government. A recruiter for the Department of Government Efficiency proposed in April 2025 to use AI agents to automate the work of about 70,000 United States federal government employees, as part of a startup with funding from OpenAI and a partnership agreement with Palantir. This proposal was criticized by experts for its impracticality, if not impossibility, and the lack of corresponding widespread adoption by businesses. In December 2025, the Food and Drug Administration announced that it would offer "agentic AI capabilities" to its staff for "meeting management, pre-market reviews, review validation, post-market surveillance, inspections and compliance and administrative functions." That same month, the United States Department of Defense launched GenAI.mil, an internal platform for American military personnel to use generative AI-based applications based on Google Gemini, including "intelligent agentic workflows". Defense Secretary Pete Hegseth listed applications such as "[conducting] deep r

  Read more →
• 

  Collision problem

  The r-to-1 collision problem is an important theoretical problem in complexity theory, quantum computing, and computational mathematics. The collision problem most often refers to the 2-to-1 version: given n {\displaystyle n} even and a function f : { 1 , … , n } → { 1 , … , n } {\displaystyle f:\,\{1,\ldots ,n\}\rightarrow \{1,\ldots ,n\}} , we are promised that f is either 1-to-1 or 2-to-1. We are only allowed to make queries about the value of f ( i ) {\displaystyle f(i)} for any i ∈ { 1 , … , n } {\displaystyle i\in \{1,\ldots ,n\}} . The problem then asks how many such queries we need to make to determine with certainty whether f is 1-to-1 or 2-to-1. == Classical solutions == === Deterministic === Solving the 2-to-1 version deterministically requires n 2 + 1 {\textstyle {\frac {n}{2}}+1} queries, and in general distinguishing r-to-1 functions from 1-to-1 functions requires n r + 1 {\textstyle {\frac {n}{r}}+1} queries. This is a straightforward application of the pigeonhole principle: if a function is r-to-1, then after n r + 1 {\textstyle {\frac {n}{r}}+1} queries we are guaranteed to have found a collision. If a function is 1-to-1, then no collision exists. Thus, n r + 1 {\textstyle {\frac {n}{r}}+1} queries suffice. If we are unlucky, then the first n / r {\displaystyle n/r} queries could return distinct answers, so n r + 1 {\textstyle {\frac {n}{r}}+1} queries is also necessary. === Randomized === If we allow randomness, the problem is easier. By the birthday paradox, if we choose (distinct) queries at random, then with high probability we find a collision in any fixed 2-to-1 function after Θ ( n ) {\displaystyle \Theta ({\sqrt {n}})} queries. == Quantum solution == The BHT algorithm, which uses Grover's algorithm, solves this problem optimally by only making O ( n 1 / 3 ) {\displaystyle O(n^{1/3})} queries to f. The matching lower bound of Ω ( n 1 / 3 ) {\displaystyle \Omega (n^{1/3})} was proved by Aaronson and Shi using the polynomial method.

  Read more →
• 

  Tagsistant

  Tagsistant is a semantic file system for the Linux kernel, written in C and based on FUSE. Unlike traditional file systems that use hierarchies of directories to locate objects, Tagsistant introduces the concept of tags. == Design and differences with hierarchical file systems == In computing, a file system is a type of data store which could be used to store, retrieve and update files. Each file can be uniquely located by its path. The user must know the path in advance to access a file and the path does not necessarily include any information about the content of the file. Tagsistant uses a complementary approach based on tags. The user can create a set of tags and apply those tags to files, directories and other objects (devices, pipes, ...). The user can then search all the objects that match a subset of tags, called a query. This kind of approach is well suited for managing user contents like pictures, audio recordings, movies and text documents but is incompatible with system files (like libraries, commands and configurations) where the univocity of the path is a security requirement to prevent the access to a wrong content. == The tags/ directory == A Tagsistant file system features four main directories: archive/ relations/ stats/ tags/ Tags are created as sub directories of the tags/ directory and can be used in queries complying to this syntax: tags/subquery/[+/subquery/[+/subquery/]]/@/ where a subquery is an unlimited list of tags, concatenated as directories: tag1/tag2/tag3/.../tagN/ The portion of a path delimited by tags/ and @/ is the actual query. The +/ operator joins the results of different sub-queries in one single list. The @/ operator ends the query. To be returned as a result of the following query: tags/t1/t2/+/t1/t4/@/ an object must be tagged as both t1/ and t2/ or as both t1/ and t4/. Any object tagged as t2/ or t4/, but not as t1/ will not be retrieved. The query syntax deliberately violates the POSIX file system semantics by allowing a path token to be a descendant of itself, like in tags/t1/t2/+/t1/t4/@ where t1/ appears twice. As a consequence a recursive scan of a Tagsistant file system will exit with an error or endlessly loop, as done by Unix find: This drawback is balanced by the possibility to list the tags inside a query in any order. The query tags/t1/t2/@/ is completely equivalent to tags/t2/t1/@/ and tags/t1/+/t2/t3/@/ is equivalent to tags/t2/t3/+/t1/@/. The @/ element has the precise purpose of restoring the POSIX semantics: the path tags/t1/@/directory/ refers to a traditional directory and a recursive scan of this path will properly perform. == The reasoner and the relations/ directory == Tagsistant features a simple reasoner which expands the results of a query by including objects tagged with related tags. A relation between two tags can be established inside the relations/ directory following a three level pattern: relations/tag1/rel/tag2/ The rel element can be includes or is_equivalent. To include the rock tag in the music tag, the Unix command mkdir can be used: mkdir -p relations/music/includes/rock The reasoner can recursively resolve relations, allowing the creation of complex structures: mkdir -p relations/music/includes/rock mkdir -p relations/rock/includes/hard_rock mkdir -p relations/rock/includes/grunge mkdir -p relations/rock/includes/heavy_metal mkdir -p relations/heavy_metal/includes/speed_metal The web of relations created inside the relations/ directory constitutes a basic form of ontology. == Autotagging plugins == Tagsistant features an autotagging plugin stack which gets called when a file or a symlink is written. Each plugin is called if its declared MIME type matches The list of working plugins released with Tagsistant 0.6 is limited to: text/html: tags the file with each word in