AI Face Animator

AI Face Animator — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Dyme (company)

  Dyme is a Dutch fintech start-up and subscription management app that allows users to cancel and renegotiate their recurring costs. In 2019, Dyme was the first independent Dutch company to receive a PSD2 licence from the Netherlands' central bank (DNB). == History == Dyme was founded in 2018 by Joran Iedema, David Knap, David Schogt and Wouter Florijn. The four had previously founded Cycleswap, a bicycle rental platform launched in 2015 and sold to the American platform Spinlister in 2016. The company gained notability in the Netherlands in 2020 when it appeared on Dutch television in Dragons Den, where Pieter Schoen made a €750,000 bid in an attempt to acquire 51.01% of the company. Dyme's Joran Iedema rejected the deal. == Recognition == Wired described Dyme as one of the "hottest start-ups in Europe" in 2021. As of 2021, the company reportedly had 350,000 registered users in the Netherlands and Great Britain.

  Read more →
• 

  Moral graph

  In graph theory, a moral graph is used to find the equivalent undirected form of a directed acyclic graph. It is a key step of the junction tree algorithm, used in belief propagation on graphical models. The moralized counterpart of a directed acyclic graph is formed by adding edges between all pairs of non-adjacent nodes that have a common child, and then making all edges in the graph undirected. Equivalently, a moral graph of a directed acyclic graph G is an undirected graph in which each node of the original G is now connected to its Markov blanket. The name stems from the fact that, in a moral graph, two nodes that have a common child are required to be married by sharing an edge. Moralization may also be applied to mixed graphs, called in this context "chain graphs". In a chain graph, a connected component of the undirected subgraph is called a chain. Moralization adds an undirected edge between any two vertices that both have outgoing edges to the same chain, and then forgets the orientation of the directed edges of the graph. == Weakly recursively simplicial == A graph is weakly recursively simplicial if it has a simplicial vertex and the subgraph after removing a simplicial vertex and some edges (possibly none) between its neighbours is weakly recursively simplicial. A graph is moral if and only if it is weakly recursively simplicial. A chordal graph (a.k.a., recursive simplicial) is a special case of weakly recursively simplicial when no edge is removed during the elimination process. Therefore, a chordal graph is also moral. But a moral graph is not necessarily chordal. == Recognising moral graphs == Unlike chordal graphs that can be recognised in polynomial time, Verma & Pearl (1993) proved that deciding whether or not a graph is moral is NP-complete.

  Read more →
• 

  Gremlin (query language)

  Gremlin is a graph traversal language and virtual machine developed by Apache TinkerPop of the Apache Software Foundation. Gremlin works for both OLTP-based graph databases as well as OLAP-based graph processors. Gremlin's automata and functional language foundation enable Gremlin to naturally support imperative and declarative querying, host language agnosticism, user-defined domain specific languages, an extensible compiler/optimizer, single- and multi-machine execution models, and hybrid depth- and breadth-first evaluation with Turing completeness. As an explanatory analogy, Apache TinkerPop and Gremlin are to graph databases what the JDBC and SQL are to relational databases. Likewise, the Gremlin traversal machine is to graph computing as what the Java virtual machine is to general purpose computing. == History == 2009-10-30 the project is born, and immediately named "TinkerPop" 2009-12-25 v0.1 is the first release 2011-05-21 v1.0 is released 2012-05-24 v2.0 is released 2015-01-16 TinkerPop becomes an Apache Incubator project 2015-07-09 v3.0.0-incubating is released 2016-05-23 Apache TinkerPop becomes a top-level project 2016-07-18 v3.1.3 and v3.2.1 are first releases as Apache TinkerPop 2017-12-17 v3.3.1 is released 2018-05-08 v3.3.3 is released 2019-08-05 v3.4.3 is released 2020-02-20 v3.4.6 is released 2021-05-01 v3.5.0 is released 2022-04-04 v3.6.0 is released 2023-07-31 v3.7.0 is released 2025-11-12 v3.8.0 is released == Vendor integration == Gremlin is an Apache2-licensed graph traversal language that can be used by graph system vendors. There are typically two types of graph system vendors: OLTP graph databases and OLAP graph processors. The table below outlines those graph vendors that support Gremlin. == Traversal examples == The following examples of Gremlin queries and responses in a Gremlin-Groovy environment are relative to a graph representation of the MovieLens dataset. The dataset includes users who rate movies. Users each have one occupation, and each movie has one or more categories associated with it. The MovieLens graph schema is detailed below. === Simple traversals === For each vertex in the graph, emit its label, then group and count each distinct label. What year was the oldest movie made? What is Die Hard's average rating? === Projection traversals === For each category, emit a map of its name and the number of movies it represents. For each movie with at least 11 ratings, emit a map of its name and average rating. Sort the maps in decreasing order by their average rating. Emit the first 10 maps (i.e. top 10). === Declarative pattern matching traversals === Gremlin supports declarative graph pattern matching similar to SPARQL. For instance, the following query below uses Gremlin's match()-step. What 80's action movies do 30-something programmers like? Group count the movies by their name and sort the group count map in decreasing order by value. Clip the map to the top 10 and emit the map entries. === OLAP traversal === Which movies are most central in the implicit 5-stars graph? == Gremlin graph traversal machine == Gremlin is a virtual machine composed of an instruction set as well as an execution engine. An analogy is drawn between Gremlin and Java. === Gremlin steps (instruction set) === The following traversal is a Gremlin traversal in the Gremlin-Java8 dialect. The Gremlin language (i.e. the fluent-style of expressing a graph traversal) can be represented in any host language that supports function composition and function nesting. Due to this simple requirement, there exists various Gremlin dialects including Gremlin-Groovy, Gremlin-Scala, Gremlin-Clojure, etc. The above Gremlin-Java8 traversal is ultimately compiled down to a step sequence called a traversal. A string representation of the traversal above provided below. The steps are the primitives of the Gremlin graph traversal machine. They are the parameterized instructions that the machine ultimately executes. The Gremlin instruction set is approximately 30 steps. These steps are sufficient to provide general purpose computing and what is typically required to express the common motifs of any graph traversal query. Given that Gremlin is a language, an instruction set, and a virtual machine, it is possible to design another traversal language that compiles to the Gremlin traversal machine (analogous to how Scala compiles to the JVM). For instance, the popular SPARQL graph pattern match language can be compiled to execute on the Gremlin machine. The following SPARQL query would compile to In Gremlin-Java8, the SPARQL query above would be represented as below and compile to the identical Gremlin step sequence (i.e. traversal). === Gremlin Machine (virtual machine) === The Gremlin graph traversal machine can execute on a single machine or across a multi-machine compute cluster. Execution agnosticism allows Gremlin to run over both graph databases (OLTP) and graph processors (OLAP).

  Read more →
• 

  Distribution learning theory

  The distributional learning theory or learning of probability distribution is a framework in computational learning theory. It has been proposed from Michael Kearns, Yishay Mansour, Dana Ron, Ronitt Rubinfeld, Robert Schapire and Linda Sellie in 1994 and it was inspired from the PAC-framework introduced by Leslie Valiant. In this framework the input is a number of samples drawn from a distribution that belongs to a specific class of distributions. The goal is to find an efficient algorithm that, based on these samples, determines with high probability the distribution from which the samples have been drawn. Because of its generality, this framework has been used in a large variety of different fields like machine learning, approximation algorithms, applied probability and statistics. This article explains the basic definitions, tools and results in this framework from the theory of computation point of view. == Definitions == Let X {\displaystyle \textstyle X} be the support of the distributions of interest. As in the original work of Kearns et al. if X {\displaystyle \textstyle X} is finite it can be assumed without loss of generality that X = { 0 , 1 } n {\displaystyle \textstyle X=\{0,1\}^{n}} where n {\displaystyle \textstyle n} is the number of bits that have to be used in order to represent any y ∈ X {\displaystyle \textstyle y\in X} . We focus in probability distributions over X {\displaystyle \textstyle X} . There are two possible representations of a probability distribution D {\displaystyle \textstyle D} over X {\displaystyle \textstyle X} . probability distribution function (or evaluator) an evaluator E D {\displaystyle \textstyle E_{D}} for D {\displaystyle \textstyle D} takes as input any y ∈ X {\displaystyle \textstyle y\in X} and outputs a real number E D [ y ] {\displaystyle \textstyle E_{D}[y]} which denotes the probability that of y {\displaystyle \textstyle y} according to D {\displaystyle \textstyle D} , i.e. E D [ y ] = Pr [ Y = y ] {\displaystyle \textstyle E_{D}[y]=\Pr[Y=y]} if Y ∼ D {\displaystyle \textstyle Y\sim D} . generator a generator G D {\displaystyle \textstyle G_{D}} for D {\displaystyle \textstyle D} takes as input a string of truly random bits y {\displaystyle \textstyle y} and outputs G D [ y ] ∈ X {\displaystyle \textstyle G_{D}[y]\in X} according to the distribution D {\displaystyle \textstyle D} . Generator can be interpreted as a routine that simulates sampling from the distribution D {\displaystyle \textstyle D} given a sequence of fair coin tosses. A distribution D {\displaystyle \textstyle D} is called to have a polynomial generator (respectively evaluator) if its generator (respectively evaluator) exists and can be computed in polynomial time. Let C X {\displaystyle \textstyle C_{X}} a class of distribution over X, that is C X {\displaystyle \textstyle C_{X}} is a set such that every D ∈ C X {\displaystyle \textstyle D\in C_{X}} is a probability distribution with support X {\displaystyle \textstyle X} . The C X {\displaystyle \textstyle C_{X}} can also be written as C {\displaystyle \textstyle C} for simplicity. In order to evaluate learnability, it is necessary to have a way to measure how well an approximated distribution D ′ {\displaystyle \textstyle D'} fits the sampled distribution D {\displaystyle \textstyle D} . There are several ways to measure the divergence between two distributions. Three common possibilities are Kullback–Leibler divergence Total variation distance of probability measures Kolmogorov distance Total variation and Kolmogorov distance are true metrics, while KL divergence is not (it lacks symmetry). These measures are ordered by convergence strength: closeness in KL divergence implies closeness in total variation (via Pinsker's inequality), which in turn implies closeness in Kolmogorov distance. Therefore, a learnability result proven under KL divergence automatically holds under the weaker measures, but not vice versa. Since certain measures may be more appropriate in specific applications, we will use d ( D , D ′ ) {\displaystyle \textstyle d(D,D')} to denote a selected divergence between the distribution D {\displaystyle \textstyle D} and the distribution D ′ {\displaystyle \textstyle D'} . The basic input that we use in order to learn a distribution is a number of samples drawn by this distribution. For the computational point of view the assumption is that such a sample is given in a constant amount of time. So it's like having access to an oracle G E N ( D ) {\displaystyle \textstyle GEN(D)} that returns a sample from the distribution D {\displaystyle \textstyle D} . Sometimes the interest is, apart from measuring the time complexity, to measure the number of samples that have to be used in order to learn a specific distribution D {\displaystyle \textstyle D} in class of distributions C {\displaystyle \textstyle C} . This quantity is called sample complexity of the learning algorithm. In order for the problem of distribution learning to be more clear consider the problem of supervised learning as defined in. In this framework of statistical learning theory a training set S = { ( x 1 , y 1 ) , … , ( x n , y n ) } {\displaystyle \textstyle S=\{(x_{1},y_{1}),\dots ,(x_{n},y_{n})\}} and the goal is to find a target function f : X → Y {\displaystyle \textstyle f:X\rightarrow Y} that minimizes some loss function, e.g. the square loss function. More formally f = arg ⁡ min g ∫ V ( y , g ( x ) ) d ρ ( x , y ) {\displaystyle f=\arg \min _{g}\int V(y,g(x))d\rho (x,y)} , where V ( ⋅ , ⋅ ) {\displaystyle V(\cdot ,\cdot )} is the loss function, e.g. V ( y , z ) = ( y − z ) 2 {\displaystyle V(y,z)=(y-z)^{2}} and ρ ( x , y ) {\displaystyle \rho (x,y)} the probability distribution according to which the elements of the training set are sampled. If the conditional probability distribution ρ x ( y ) {\displaystyle \rho _{x}(y)} is known then the target function has the closed form f ( x ) = ∫ y y d ρ x ( y ) {\displaystyle f(x)=\int _{y}yd\rho _{x}(y)} . So the set S {\displaystyle S} is a set of samples from the probability distribution ρ ( x , y ) {\displaystyle \rho (x,y)} . Now the goal of distributional learning theory if to find ρ {\displaystyle \rho } given S {\displaystyle S} which can be used to find the target function f {\displaystyle f} . Definition of learnability A class of distributions C {\displaystyle \textstyle C} is called efficiently learnable if for every ϵ > 0 {\displaystyle \textstyle \epsilon >0} and 0 < δ ≤ 1 {\displaystyle \textstyle 0<\delta \leq 1} given access to G E N ( D ) {\displaystyle \textstyle GEN(D)} for an unknown distribution D ∈ C {\displaystyle \textstyle D\in C} , there exists a polynomial time algorithm A {\displaystyle \textstyle A} , called learning algorithm of C {\displaystyle \textstyle C} , that outputs a generator or an evaluator of a distribution D ′ {\displaystyle \textstyle D'} such that Pr [ d ( D , D ′ ) ≤ ϵ ] ≥ 1 − δ {\displaystyle \Pr[d(D,D')\leq \epsilon ]\geq 1-\delta } If we know that D ′ ∈ C {\displaystyle \textstyle D'\in C} then A {\displaystyle \textstyle A} is called proper learning algorithm, otherwise is called improper learning algorithm. In some settings the class of distributions C {\displaystyle \textstyle C} is a class with well known distributions which can be described by a set of parameters. For instance C {\displaystyle \textstyle C} could be the class of all the Gaussian distributions N ( μ , σ 2 ) {\displaystyle \textstyle N(\mu ,\sigma ^{2})} . In this case the algorithm A {\displaystyle \textstyle A} should be able to estimate the parameters μ , σ {\displaystyle \textstyle \mu ,\sigma } . In this case A {\displaystyle \textstyle A} is called parameter learning algorithm. Obviously the parameter learning for simple distributions is a very well studied field that is called statistical estimation and there is a very long bibliography on different estimators for different kinds of simple known distributions. But distributions learning theory deals with learning class of distributions that have more complicated description. == First results == In their seminal work, Kearns et al. deal with the case where A {\displaystyle \textstyle A} is described in term of a finite polynomial sized circuit and they proved the following for some specific classes of distribution. O R {\displaystyle \textstyle OR} gate distributions for this kind of distributions there is no polynomial-sized evaluator, unless # P ⊆ P / poly {\displaystyle \textstyle \#P\subseteq P/{\text{poly}}} . On the other hand, this class is efficiently learnable with generator. Parity gate distributions this class is efficiently learnable with both generator and evaluator. Mixtures of Hamming Balls this class is efficiently learnable with both generator and evaluator. Probabilistic Finite Automata this class is not efficiently learnable with evaluator under the Noisy Parity Assumption which is an impossibility assumption in the PAC learning fram

  Read more →
• 

  Learning curve (machine learning)

  In machine learning (ML), a learning curve (or training curve) is a graphical representation that shows how a model's performance on a training set (and usually a validation set) changes with the number of training iterations (epochs) or the amount of training data. Typically, the number of training epochs or training set size is plotted on the x-axis, and the value of the loss function (and possibly some other metric such as the cross-validation score) on the y-axis. Synonyms include error curve, experience curve, improvement curve and generalization curve. More abstractly, learning curves plot the difference between learning effort and predictive performance, where "learning effort" usually means the number of training samples, and "predictive performance" means accuracy on testing samples. Learning curves have many useful purposes in ML, including: choosing model parameters during design, adjusting optimization to improve convergence, and diagnosing problems such as overfitting (or underfitting). Learning curves can also be tools for determining how much a model benefits from adding more training data, and whether the model suffers more from a variance error or a bias error. If both the validation score and the training score converge to a certain value, then the model will no longer significantly benefit from more training data. == Formal definition == When creating a function to approximate the distribution of some data, it is necessary to define a loss function L ( f θ ( X ) , Y ) {\displaystyle L(f_{\theta }(X),Y)} to measure how good the model output is (e.g., accuracy for classification tasks or mean squared error for regression). We then define an optimization process which finds model parameters θ {\displaystyle \theta } such that L ( f θ ( X ) , Y ) {\displaystyle L(f_{\theta }(X),Y)} is minimized, referred to as θ ∗ {\displaystyle \theta ^{}} . === Training curve for amount of data === If the training data is { x 1 , x 2 , … , x n } , { y 1 , y 2 , … y n } {\displaystyle \{x_{1},x_{2},\dots ,x_{n}\},\{y_{1},y_{2},\dots y_{n}\}} and the validation data is { x 1 ′ , x 2 ′ , … x m ′ } , { y 1 ′ , y 2 ′ , … y m ′ } {\displaystyle \{x_{1}',x_{2}',\dots x_{m}'\},\{y_{1}',y_{2}',\dots y_{m}'\}} , a learning curve is the plot of the two curves i ↦ L ( f θ ∗ ( X i , Y i ) ( X i ) , Y i ) {\displaystyle i\mapsto L(f_{\theta ^{}(X_{i},Y_{i})}(X_{i}),Y_{i})} i ↦ L ( f θ ∗ ( X i , Y i ) ( X i ′ ) , Y i ′ ) {\displaystyle i\mapsto L(f_{\theta ^{}(X_{i},Y_{i})}(X_{i}'),Y_{i}')} where X i = { x 1 , x 2 , … x i } {\displaystyle X_{i}=\{x_{1},x_{2},\dots x_{i}\}} === Training curve for number of iterations === Many optimization algorithms are iterative, repeating the same step (such as backpropagation) until the process converges to an optimal value. Gradient descent is one such algorithm. If θ i ∗ {\displaystyle \theta _{i}^{}} is the approximation of the optimal θ {\displaystyle \theta } after i {\displaystyle i} steps, a learning curve is the plot of i ↦ L ( f θ i ∗ ( X , Y ) ( X ) , Y ) {\displaystyle i\mapsto L(f_{\theta _{i}^{}(X,Y)}(X),Y)} i ↦ L ( f θ i ∗ ( X , Y ) ( X ′ ) , Y ′ ) {\displaystyle i\mapsto L(f_{\theta _{i}^{}(X,Y)}(X'),Y')}

  Read more →
• 

  Taguchi loss function

  The Taguchi loss function is graphical depiction of loss developed by the Japanese business statistician Genichi Taguchi to describe a phenomenon affecting the value of products produced by a company. Praised by Dr. W. Edwards Deming (the business guru of the 1980s American quality movement), it made clear the concept that quality does not suddenly plummet when, for instance, a machinist exceeds a rigid blueprint tolerance. Instead 'loss' in value progressively increases as variation increases from the intended condition. This was considered a breakthrough in describing quality, and helped fuel the continuous improvement movement. The concept of Taguchi's quality loss function was in contrast with the American concept of quality, popularly known as goal post philosophy, the concept given by American quality guru Phil Crosby. Goal post philosophy emphasizes that if a product feature doesn't meet the designed specifications it is termed as a product of poor quality (rejected), irrespective of amount of deviation from the target value (mean value of tolerance zone). This concept has similarity with the concept of scoring a 'goal' in the game of football or hockey, because a goal is counted 'one' irrespective of the location of strike of the ball in the 'goal post', whether it is in the center or towards the corner. This means that if the product dimension goes out of the tolerance limit the quality of the product drops suddenly. Through his concept of the quality loss function, Taguchi explained that from the customer's point of view this drop of quality is not sudden. The customer experiences a loss of quality the moment product specification deviates from the 'target value'. This 'loss' is depicted by a quality loss function and it follows a parabolic curve mathematically given by L = k(y–m)2, where m is the theoretical 'target value' or 'mean value' and y is the actual size of the product, k is a constant and L is the loss. This means that if the difference between 'actual size' and 'target value' i.e. (y–m) is large, loss would be more, irrespective of tolerance specifications. In Taguchi's view tolerance specifications are given by engineers and not by customers; what the customer experiences is 'loss'. This equation is true for a single product; if 'loss' is to be calculated for multiple products the loss function is given by L = k[S2 + ( y ¯ {\displaystyle {\bar {y}}} – m)2], where S2 is the 'variance of product size' and y ¯ {\displaystyle {\bar {y}}} is the average product size. == Overview == The Taguchi loss function is important for a number of reasons—primarily, to help engineers better understand the importance of designing for variation.

  Read more →
• 

  Promoter based genetic algorithm

  The promoter based genetic algorithm (PBGA) is a genetic algorithm for neuroevolution developed by F. Bellas and R.J. Duro in the Integrated Group for Engineering Research (GII) at the University of Coruña, in Spain. It evolves variable size feedforward artificial neural networks (ANN) that are encoded into sequences of genes for constructing a basic ANN unit. Each of these blocks is preceded by a gene promoter acting as an on/off switch that determines if that particular unit will be expressed or not. == PBGA basics == The basic unit in the PBGA is a neuron with all of its inbound connections as represented in the following figure: The genotype of a basic unit is a set of real valued weights followed by the parameters of the neuron and proceeded by an integer valued field that determines the promoter gene value and, consequently, the expression of the unit. By concatenating units of this type we can construct the whole network. With this encoding it is imposed that the information that is not expressed is still carried by the genotype in evolution but it is shielded from direct selective pressure, maintaining this way the diversity in the population, which has been a design premise for this algorithm. Therefore, a clear difference is established between the search space and the solution space, permitting information learned and encoded into the genotypic representation to be preserved by disabling promoter genes. == Results == The PBGA was originally presented within the field of autonomous robotics, in particular in the real time learning of environment models of the robot. It has been used inside the Multilevel Darwinist Brain (MDB) cognitive mechanism developed in the GII for real robots on-line learning. In another paper it is shown how the application of the PBGA together with an external memory that stores the successful obtained world models, is an optimal strategy for adaptation in dynamic environments. Recently, the PBGA has provided results that outperform other neuroevolutionary algorithms in non-stationary problems, where the fitness function varies in time.

  Read more →
• 

  Effective fitness

  In natural evolution and artificial evolution (e.g. artificial life and evolutionary computation) the fitness (or performance or objective measure) of a schema is rescaled to give its effective fitness which takes into account crossover and mutation. Effective fitness is used in Evolutionary Computation to understand population dynamics. While a biological fitness function only looks at reproductive success, an effective fitness function tries to encompass things that are needed to be fulfilled for survival on population level. In homogeneous populations, reproductive fitness and effective fitness are equal. When a population moves away from homogeneity a higher effective fitness is reached for the recessive genotype. This advantage will decrease while the population moves toward an equilibrium. The deviation from this equilibrium displays how close the population is to achieving a steady state. When this equilibrium is reached, the maximum effective fitness of the population is achieved. Problem solving with evolutionary computation is realized with a cost function. If cost functions are applied to swarm optimization they are called a fitness function. Strategies like reinforcement learning and NEAT neuroevolution are creating a fitness landscape which describes the reproductive success of cellular automata. The effective fitness function models the number of fit offspring and is used in calculations that include evolutionary processes, such as mutation and crossover, important on the population level. The effective fitness model is superior to its predecessor, the standard reproductive fitness model. It advances in the qualitatively and quantitatively understanding of evolutionary concepts like bloat, self-adaptation, and evolutionary robustness. While reproductive fitness only looks at pure selection, effective fitness describes the flow of a population and natural selection by taking genetic operators into account. A normal fitness function fits to a problem, while an effective fitness function is an assumption if the objective was reached. The difference is important for designing fitness functions with algorithms like novelty search in which the objective of the agents is unknown. In the case of bacteria effective fitness could include production of toxins and rate of mutation of different plasmids, which are mostly stochastically determined == Applications == When evolutionary equations of the studied population dynamics are available, one can algorithmically compute the effective fitness of a given population. Though the perfect effective fitness model is yet to be found, it is already known to be a good framework to the better understanding of the moving of the genotype-phenotype map, population dynamics, and the flow on fitness landscapes. Models using a combination of Darwinian fitness functions and effective functions are better at predicting population trends. Effective models could be used to determine therapeutic outcomes of disease treatment. Other models could determine effective protein engineering and works towards finding novel or heightened biochemistry.

  Read more →
• 

  Transderivational search

  Transderivational search (often abbreviated to TDS) is a psychological and cybernetics term, meaning when a search is being conducted for a fuzzy match across a broad field. In computing the equivalent function can be performed using content-addressable memory. Unlike usual searches, which look for literal (i.e. exact, logical, or regular expression) matches, a transderivational search is a search for a possible meaning or possible match as part of communication, and without which an incoming communication cannot be made any sense of whatsoever. It is thus an integral part of processing language, and of attaching meaning to communication. In NLP (Neuro-linguistic programming), a transderivational search (Bandler and Grinder, 1976) is essentially the process of searching back through one's stored memories and mental representations to find the personal reference experiences from which a current understanding or mental map has been derived. By the end of 1976, Grinder and Bandler had combined Satir’s and Perls’ language patterns and Erickson’s hypnotic language and use of metaphor with anchoring to create new processes that they called collapsing anchors, trans-derivational search, changing personal history, and reframing. A psychological example of TDS is in Ericksonian hypnotherapy, where vague suggestions are used that the patient must process intensely in order to find their own meanings, thus ensuring that the practitioner does not intrude his own beliefs into the subject's inner world. == TDS in human communication and processing == Because TDS is a compelling, automatic and unconscious state of internal focus and processing (i.e. a type of everyday trance state), and often a state of internal lack of certainty, or openness to finding an answer (since something is being checked out at that moment), it can be utilized or interrupted, in order to create, or deepen, trance. TDS is a fundamental part of human language and cognitive processing. Arguably, every word or utterance a person hears, for example, and everything they see or feel and take note of, results in a very brief trance while TDS is carried out to establish a contextual meaning for it. === Examples === Leading statements: "And those thoughts you had yesterday..." the human mind cannot process hearing this phrase, without at some level searching internally for some thoughts or other that it had yesterday, to make the subject of the sentence. "The many colors that fruit can be" likewise starts the human mind considering even if briefly, different fruit sorted by color. "You did it again, didn't you!" This everyday manipulative use of TDS usually sends the recipient looking internally for some "it" they may have done for which blame is being fairly given. Regardless of whether such a matter can be identified, guilt or anger may result. "There has been pain, hasn't there" the mind of a patient suffering an illness will find it very hard or impossible to hear or answer this sentence without conducting internal searches to verify whether this is true or not, or to find an example if so. "You'd forgotten something [or: some part of your body], hadn't you?" the mind usually checks through the various things, or parts of the body, on hearing this, seeing if each in turn has been forgotten. Textual ambiguity: "Do you remember line dancing on the steps?" Without sufficient context, some statements may trigger TDS in order to resolve inherent ambiguity in the interpretation of a posed question. Do I remember a bygone fad called "line dancing on the steps"? Do I remember personally engaging in dancing in the past? Do I remember my routine practice dancing by focusing on the steps of the dance? Do I tend to forget about dancing when I am standing on steps? "Penny-wise and pound the table dance to the beat of a different drummer". The mixing of cliché and stock phrases may trigger TDS in order to reconcile the discrepancies between expected and actual utterances in sequence. Although TDS is often associated with spoken language, it can be induced in any perceptual system. Thus Milton Erickson's "hypnotic handshake" is a technique that leaves the other person performing TDS in search of meaning to a deliberately ambiguous use of touch.

  Read more →
• 

  Q-learning

  Q-learning is a reinforcement learning algorithm that trains an agent to assign values to its possible actions based on its current state, without requiring a model of the environment (model-free). It can handle problems with stochastic transitions and rewards without requiring adaptations. For example, in a grid maze, an agent learns to reach an exit worth 10 points. At a junction, Q-learning might assign a higher value to moving right than left if right gets to the exit faster, improving this choice by trying both directions over time. For any finite Markov decision process, Q-learning finds an optimal policy in the sense of maximizing the expected value of the total reward over any and all successive steps, starting from the current state. Q-learning can identify an optimal action-selection policy for any given finite Markov decision process, given infinite exploration time and a partly random policy. "Q" refers to the function that the algorithm computes: the expected reward—that is, the quality—of an action taken in a given state. == Reinforcement learning == Reinforcement learning involves an agent, a set of states S {\displaystyle {\mathcal {S}}} , and a set A {\displaystyle {\mathcal {A}}} of actions per state. By performing an action a ∈ A {\displaystyle a\in {\mathcal {A}}} , the agent transitions from state to state. Executing an action in a specific state provides the agent with a reward (a numerical score). The goal of the agent is to maximize its total reward. It does this by adding the maximum reward attainable from future states to the reward for achieving its current state, effectively influencing the current action by the potential future reward. This potential reward is a weighted sum of expected values of the rewards of all future steps starting from the current state. As an example, consider the process of boarding a train, in which the reward is measured by the negative of the total time spent boarding (alternatively, the cost of boarding the train is equal to the boarding time). One strategy is to enter the train door as soon as they open, minimizing the initial wait time for yourself. If the train is crowded, however, then you will have a slow entry after the initial action of entering the door as people are fighting you to depart the train as you attempt to board. The total boarding time, or cost, is then: 0 seconds wait time + 15 seconds fight time On the next day, by random chance (exploration), you decide to wait and let other people depart first. This initially results in a longer wait time. However, less time is spent fighting the departing passengers. Overall, this path has a higher reward than that of the previous day, since the total boarding time is now: 5 second wait time + 0 second fight time Through exploration, despite the initial (patient) action resulting in a larger cost (or negative reward) than in the forceful strategy, the overall cost is lower, thus revealing a more rewarding strategy. == Algorithm == After Δ t {\displaystyle \Delta t} steps into the future the agent will decide some next step. The weight for this step is calculated as γ Δ t {\displaystyle \gamma ^{\Delta t}} , where γ {\displaystyle \gamma } (the discount factor) is a number between 0 and 1 ( 0 ≤ γ ≤ 1 {\displaystyle 0\leq \gamma \leq 1} ). Assuming γ < 1 {\displaystyle \gamma <1} , it has the effect of valuing rewards received earlier higher than those received later (reflecting the value of a "good start"). γ {\displaystyle \gamma } may also be interpreted as the probability to succeed (or survive) at every step Δ t {\displaystyle \Delta t} . The algorithm, therefore, has a function that calculates the quality of a state–action combination: Q : S × A → R {\displaystyle Q:{\mathcal {S}}\times {\mathcal {A}}\to \mathbb {R} } . Before learning begins, ⁠ Q {\displaystyle Q} ⁠ is initialized to a possibly arbitrary fixed value (chosen by the programmer). Then, at each time t {\displaystyle t} the agent selects an action A t {\displaystyle A_{t}} , observes a reward R t + 1 {\displaystyle R_{t+1}} , enters a new state S t + 1 {\displaystyle S_{t+1}} (that may depend on both the previous state S t {\displaystyle S_{t}} and the selected action), and Q {\displaystyle Q} is updated. The core of the algorithm is a Bellman equation as a simple value iteration update, using the weighted average of the current value and the new information: Q n e w ( S t , A t ) ← ( 1 − α ⏟ learning rate ) ⋅ Q ( S t , A t ) ⏟ current value + α ⏟ learning rate ⋅ ( R t + 1 ⏟ reward + γ ⏟ discount factor ⋅ max a Q ( S t + 1 , a ) ⏟ estimate of optimal future value ⏟ new value (temporal difference target) ) {\displaystyle Q^{new}(S_{t},A_{t})\leftarrow (1-\underbrace {\alpha } _{\text{learning rate}})\cdot \underbrace {Q(S_{t},A_{t})} _{\text{current value}}+\underbrace {\alpha } _{\text{learning rate}}\cdot {\bigg (}\underbrace {\underbrace {R_{t+1}} _{\text{reward}}+\underbrace {\gamma } _{\text{discount factor}}\cdot \underbrace {\max _{a}Q(S_{t+1},a)} _{\text{estimate of optimal future value}}} _{\text{new value (temporal difference target)}}{\bigg )}} where R t + 1 {\displaystyle R_{t+1}} is the reward received when moving from the state S t {\displaystyle S_{t}} to the state S t + 1 {\displaystyle S_{t+1}} , and α {\displaystyle \alpha } is the learning rate ( 0 < α ≤ 1 ) {\displaystyle (0<\alpha \leq 1)} . Note that Q n e w ( S t , A t ) {\displaystyle Q^{new}(S_{t},A_{t})} is the sum of three terms: ( 1 − α ) Q ( S t , A t ) {\displaystyle (1-\alpha )Q(S_{t},A_{t})} : the current value (weighted by one minus the learning rate) α R t + 1 {\displaystyle \alpha \,R_{t+1}} : the reward R t + 1 {\displaystyle R_{t+1}} to obtain if action A t {\displaystyle A_{t}} is taken when in state S t {\displaystyle S_{t}} (weighted by learning rate) α γ max a Q ( S t + 1 , a ) {\displaystyle \alpha \gamma \max _{a}Q(S_{t+1},a)} : the maximum reward that can be obtained from state S t + 1 {\displaystyle S_{t+1}} (weighted by learning rate and discount factor) An episode of the algorithm ends when state S t + 1 {\displaystyle S_{t+1}} is a final or terminal state. However, Q-learning can also learn in non-episodic tasks (as a result of the property of convergent infinite series). If the discount factor is lower than 1, the action values are finite even if the problem can contain infinite loops or paths. For all final states s f {\displaystyle s_{f}} , Q ( s f , a ) {\displaystyle Q(s_{f},a)} is never updated, but is set to the reward value r {\displaystyle r} observed for state s f {\displaystyle s_{f}} . In most cases, Q ( s f , a ) {\displaystyle Q(s_{f},a)} can be taken to equal zero. == Influence of variables == === Learning rate === The learning rate or step size determines to what extent newly acquired information overrides old information. A factor of 0 makes the agent learn nothing (exclusively exploiting prior knowledge), while a factor of 1 makes the agent consider only the most recent information (ignoring prior knowledge to explore possibilities). In fully deterministic environments, a learning rate of α t = 1 {\displaystyle \alpha _{t}=1} is optimal. When the problem is stochastic, the algorithm converges under some technical conditions on the learning rate that require it to decrease to zero. In practice, often a constant learning rate is used, such as α t = 0.1 {\displaystyle \alpha _{t}=0.1} for all t {\displaystyle t} . === Discount factor === The discount factor ⁠ γ {\displaystyle \gamma } ⁠ determines the importance of future rewards. A factor of 0 will make the agent "myopic" (or short-sighted) by only considering current rewards, i.e. r t {\displaystyle r_{t}} (in the update rule above), while a factor approaching 1 will make it strive for a long-term high reward. If the discount factor meets or exceeds 1, the action values may diverge. For ⁠ γ = 1 {\displaystyle \gamma =1} ⁠, without a terminal state, or if the agent never reaches one, all environment histories become infinitely long, and utilities with additive, undiscounted rewards generally become infinite. Even with a discount factor only slightly lower than 1, Q-function learning leads to propagation of errors and instabilities when the value function is approximated with an artificial neural network. In that case, starting with a lower discount factor and increasing it towards its final value accelerates learning. === Initial conditions (Q0) === Since Q-learning is an iterative algorithm, it implicitly assumes an initial condition before the first update occurs. High initial values, also known as "optimistic initial conditions", can encourage exploration: no matter what action is selected, the update rule will cause it to have lower values than the other alternative, thus increasing their choice probability. The first reward r {\displaystyle r} can be used to reset the initial conditions. According to this idea, the first time an action is taken the reward is used to set the value

  Read more →
• 

  GNU Octave

  GNU Octave is a scientific programming language for scientific computing and numerical computation. Among other things, Octave can be used to solve linear and nonlinear problems numerically and to perform other numerical experiments using a language that is mostly compatible with MATLAB. It may also be used as a batch-oriented language. As part of the GNU Project, it is free software under the terms of the GNU General Public License. == History == The project was conceived around 1988. At first it was intended to be a companion to a chemical reactor design course. Full development was started by John W. Eaton in 1992. The first alpha release dates back to 4 January 1993 and on 17 February 1994 version 1.0 was released. Version 9.2.0 was released on 7 June 2024. The program is named after Octave Levenspiel, a former professor of the principal author. Levenspiel was known for his ability to perform quick back-of-the-envelope calculations. == Development history == == Developments == In addition to use on desktops for personal scientific computing, Octave is used in academia and industry. For example, Octave was used on a massive parallel computer at Pittsburgh Supercomputing Center to find vulnerabilities related to guessing social security numbers. Acceleration with OpenCL or CUDA is also possible with use of GPUs. == Technical details == Octave is written in C++ using the C++ standard library. Octave uses an interpreter to execute the Octave scripting language. Octave is extensible using dynamically loadable modules. Octave interpreter has an OpenGL-based graphics engine to create plots, graphs and charts and to save or print them. Alternatively, gnuplot can be used for the same purpose. Octave includes a graphical user interface (GUI) in addition to the traditional command-line interface (CLI); see #User interfaces for details. == Octave, the language == The Octave language is an interpreted programming language. It is a structured programming language (similar to C) and supports many common C standard library functions, and also certain UNIX system calls and functions. However, it does not support passing arguments by reference although function arguments are copy-on-write to avoid unnecessary duplication. Octave programs consist of a list of function calls or a script. The syntax is matrix-based and provides various functions for matrix operations. It supports various data structures and allows object-oriented programming. Its syntax is very similar to MATLAB, and careful programming of a script will allow it to run on both Octave and MATLAB. Because Octave is made available under the GNU General Public License, it may be freely changed, copied and used. The program runs on Microsoft Windows and most Unix and Unix-like operating systems, including Linux, Android, and macOS. == Notable features == === Command and variable name completion === Typing a TAB character on the command line causes Octave to attempt to complete variable, function, and file names (similar to Bash's tab completion). Octave uses the text before the cursor as the initial portion of the name to complete. === Command history === When running interactively, Octave saves the commands typed in an internal buffer so that they can be recalled and edited. === Data structures === Octave includes a limited amount of support for organizing data in structures. In this example, we see a structure x with elements a, b, and c, (an integer, an array, and a string, respectively): === Short-circuit Boolean operators === Octave's && and || logical operators are evaluated in a short-circuit fashion (like the corresponding operators in the C language), in contrast to the element-by-element operators & and |. === Increment and decrement operators === Octave includes the C-like increment and decrement operators ++ and -- in both their prefix and postfix forms. Octave also does augmented assignment, e.g. x += 5. === Unwind-protect === Octave supports a limited form of exception handling modelled after the unwind_protect of Lisp. The general form of an unwind_protect block looks like this: As a general rule, GNU Octave recognizes as termination of a given block either the keyword end (which is compatible with the MATLAB language) or a more specific keyword endblock or, in some cases, end_block. As a consequence, an unwind_protect block can be terminated either with the keyword end_unwind_protect as in the example, or with the more portable keyword end. The cleanup part of the block is always executed. In case an exception is raised by the body part, cleanup is executed immediately before propagating the exception outside the block unwind_protect. GNU Octave also supports another form of exception handling (compatible with the MATLAB language): This latter form differs from an unwind_protect block in two ways. First, exception_handling is only executed when an exception is raised by body. Second, after the execution of exception_handling the exception is not propagated outside the block (unless a rethrow( lasterror ) statement is explicitly inserted within the exception_handling code). === Variable-length argument lists === Octave has a mechanism for handling functions that take an unspecified number of arguments without explicit upper limit. To specify a list of zero or more arguments, use the special argument varargin as the last (or only) argument in the list. varargin is a cell array containing all the input arguments. === Variable-length return lists === A function can be set up to return any number of values by using the special return value varargout. For example: === C++ integration === It is also possible to execute Octave code directly in a C++ program. For example, here is a code snippet for calling rand([10,1]): C and C++ code can be integrated into GNU Octave by creating oct files, or using the MATLAB compatible MEX files. == MATLAB compatibility == Octave has been built with MATLAB compatibility in mind, and shares many features with MATLAB: % Script: myscript.m a = 5; b = a 2 % Function: myfunc.m function result = myfunc(x) result = x^2 + 3; end Matrices as fundamental data type. Built-in support for complex numbers. Powerful built-in math functions and extensive function libraries. Extensibility in the form of user-defined functions. Octave treats incompatibility with MATLAB as a bug; therefore, it could be considered a software clone, which does not infringe software copyright as per Lotus v. Borland court case. MATLAB scripts from the MathWorks' FileExchange repository in principle are compatible with Octave. However, while they are often provided and uploaded by users under an Octave compatible and proper open source BSD license, the FileExchange Terms of use prohibit any usage beside MathWorks' proprietary MATLAB. === Syntax compatibility === There are a few purposeful, albeit minor, syntax additions Archived 2012-04-26 at the Wayback Machine: Comment lines can be prefixed with the # character as well as the % character; Various C-based operators ++, --, +=, =, /= are supported; Elements can be referenced without creating a new variable by cascaded indexing, e.g. [1:10](3); Strings can be defined with the double-quote " character as well as the single-quote ' character; When the variable type is single (a single-precision floating-point number), Octave calculates the "mean" in the single-domain (MATLAB in double-domain) which is faster but gives less accurate results; Blocks can also be terminated with more specific Control structure keywords, i.e., endif, endfor, endwhile, etc.; Functions can be defined within scripts and at the Octave prompt; Presence of a do-until loop (similar to do-while in C). === Function compatibility === Many, but not all, of the numerous MATLAB functions are available in GNU Octave, some of them accessible through packages in Octave Forge. The functions available as part of either core Octave or Forge packages are listed online Archived 2024-03-14 at the Wayback Machine. A list of unavailable functions is included in the Octave function __unimplemented.m__. Unimplemented functions are also listed under many Octave Forge packages in the Octave Wiki. When an unimplemented function is called the following error message is shown: == User interfaces == Octave comes with an official graphical user interface (GUI) and an integrated development environment (IDE) based on Qt. It has been available since Octave 3.8, and has become the default interface (over the command-line interface) with the release of Octave 4.0. It was well-received by an EDN contributor, who wrote "[Octave] now has a very workable GUI" in reviewing the then-new GUI in 2014. Several 3rd-party graphical front-ends have also been developed, like ToolboX for coding education. == GUI applications == With Octave code, the user can create GUI applications. See GUI Development (GNU Octave (version 7.1.0)). Below are some examples: Button, edit control, checkboxTextboxListbox wit

  Read more →
• 

  Curriculum learning

  Curriculum learning is a technique in machine learning in which a model is trained on examples of increasing difficulty, where the definition of "difficulty" may be provided externally or discovered as part of the training process. This is intended to attain good performance more quickly, or to converge to a better local optimum if the global optimum is not found. == Approach == Most generally, curriculum learning is the technique of successively increasing the difficulty of examples in the training set that is presented to a model over multiple training iterations. This can produce better results than exposing the model to the full training set immediately under some circumstances; most typically, when the model is able to learn general principles from easier examples, and then gradually incorporate more complex and nuanced information as harder examples are introduced, such as edge cases. This has been shown to work in many domains, most likely as a form of regularization. There are several major variations in how the technique is applied: A concept of "difficulty" must be defined. This may come from human annotation or an external heuristic; for example in language modeling, shorter sentences might be classified as easier than longer ones. Another approach is to use the performance of another model, with examples accurately predicted by that model being classified as easier (providing a connection to boosting). Difficulty can be increased steadily or in distinct epochs, and in a deterministic schedule or according to a probability distribution. This may also be moderated by a requirement for diversity at each stage, in cases where easier examples are likely to be disproportionately similar to each other. Applications must also decide the schedule for increasing the difficulty. Simple approaches may use a fixed schedule, such as training on easy examples for half of the available iterations and then all examples for the second half. Other approaches use self-paced learning to increase the difficulty in proportion to the performance of the model on the current set. Since curriculum learning only concerns the selection and ordering of training data, it can be combined with many other techniques in machine learning. The success of the method assumes that a model trained for an easier version of the problem can generalize to harder versions, so it can be seen as a form of transfer learning. Some authors also consider curriculum learning to include other forms of progressively increasing complexity, such as increasing the number of model parameters. It is frequently combined with reinforcement learning, such as learning a simplified version of a game first. Some domains have shown success with anti-curriculum learning: training on the most difficult examples first. One example is the ACCAN method for speech recognition, which trains on the examples with the lowest signal-to-noise ratio first. == History == The term "curriculum learning" was introduced by Yoshua Bengio et al in 2009, with reference to the psychological technique of shaping in animals and structured education for humans: beginning with the simplest concepts and then building on them. The authors also note that the application of this technique in machine learning has its roots in the early study of neural networks such as Jeffrey Elman's 1993 paper Learning and development in neural networks: the importance of starting small. Bengio et al showed good results for problems in image classification, such as identifying geometric shapes with progressively more complex forms, and language modeling, such as training with a gradually expanding vocabulary. They conclude that, for curriculum strategies, "their beneficial effect is most pronounced on the test set", suggesting good generalization. The technique has since been applied to many other domains: Natural language processing: Part-of-speech tagging Intent detection Sentiment analysis Machine translation Speech recognition Language model pre-training Image recognition: Facial recognition Object detection Reinforcement learning: Game-playing Graph learning Matrix factorization

  Read more →
• 

  Directional cubic convolution interpolation

  Directional cubic convolution interpolation (DCCI) is an edge-directed image scaling algorithm created by Dengwen Zhou and Xiaoliu Shen. By taking into account the edges in an image, this scaling algorithm reduces artifacts common to other image scaling algorithms. For example, staircase artifacts on diagonal lines and curves are eliminated. The algorithm resizes an image to 2x its original dimensions, minus 1.

  Read more →
• 

  Induction of regular languages

  In computational learning theory, induction of regular languages refers to the task of learning a formal description (e.g. grammar) of a regular language from a given set of example strings. Although E. Mark Gold has shown that not every regular language can be learned this way (see language identification in the limit), approaches have been investigated for a variety of subclasses. They are sketched in this article. For learning of more general grammars, see Grammar induction. == Definitions == A regular language is defined as a (finite or infinite) set of strings that can be described by one of the mathematical formalisms called "finite automaton", "regular grammar", or "regular expression", all of which have the same expressive power. Since the latter formalism leads to shortest notations, it shall be introduced and used here. Given a set Σ of symbols (a.k.a. alphabet), a regular expression can be any of ∅ (denoting the empty set of strings), ε (denoting the singleton set containing just the empty string), a (where a is any character in Σ; denoting the singleton set just containing the single-character string a), r + s (where r and s are, in turn, simpler regular expressions; denoting their set's union) r ⋅ s (denoting the set of all possible concatenations of strings from r's and s's set), r + (denoting the set of n-fold repetitions of strings from r's set, for any n ≥ 1), or r (similarly denoting the set of n-fold repetitions, but also including the empty string, seen as 0-fold repetition). For example, using Σ = {0,1}, the regular expression (0+1+ε)⋅(0+1) denotes the set of all binary numbers with one or two digits (leading zero allowed), while 1⋅(0+1)⋅0 denotes the (infinite) set of all even binary numbers (no leading zeroes). Given a set of strings (also called "positive examples"), the task of regular language induction is to come up with a regular expression that denotes a set containing all of them. As an example, given {1, 10, 100}, a "natural" description could be the regular expression 1⋅0, corresponding to the informal characterization "a 1 followed by arbitrarily many (maybe even none) 0's". However, (0+1) and 1+(1⋅0)+(1⋅0⋅0) is another regular expression, denoting the largest (assuming Σ = {0,1}) and the smallest set containing the given strings, and called the trivial overgeneralization and undergeneralization, respectively. Some approaches work in an extended setting where also a set of "negative example" strings is given; then, a regular expression is to be found that generates all of the positive, but none of the negative examples. == Lattice of automata == Dupont et al. have shown that the set of all structurally complete finite automata generating a given input set of example strings forms a lattice, with the trivial undergeneralized and the trivial overgeneralized automaton as bottom and top element, respectively. Each member of this lattice can be obtained by factoring the undergeneralized automaton by an appropriate equivalence relation. For the above example string set {1, 10, 100}, the picture shows at its bottom the undergeneralized automaton Aa,b,c,d in grey, consisting of states a, b, c, and d. On the state set {a,b,c,d}, a total of 15 equivalence relations exist, forming a lattice. Mapping each equivalence E to the corresponding quotient automaton language L(Aa,b,c,d / E) obtains the partially ordered set shown in the picture. Each node's language is denoted by a regular expression. The language may be recognized by quotient automata w.r.t. different equivalence relations, all of which are shown below the node. An arrow between two nodes indicates that the lower node's language is a proper subset of the higher node's. If both positive and negative example strings are given, Dupont et al. build the lattice from the positive examples, and then investigate the separation border between automata that generate some negative example and such that do not. Most interesting are those automata immediately below the border. In the picture, separation borders are shown for the negative example strings 11 (green), 1001 (blue), 101 (cyan), and 0 (red). Coste and Nicolas present an own search method within the lattice, which they relate to Mitchell's version space paradigm. To find the separation border, they use a graph coloring algorithm on the state inequality relation induced by the negative examples. Later, they investigate several ordering relations on the set of all possible state fusions. Kudo and Shimbo use the representation by automaton factorizations to give a unique framework for the following approaches (sketched below): k-reversible languages and the "tail clustering" follow-up approach, Successor automata and the predecessor-successor method, and pumping-based approaches (framework-integration challenged by Luzeaux, however). Each of these approaches is shown to correspond to a particular kind of equivalence relations used for factorization. == Approaches == === k-reversible languages === Angluin considers so-called "k-reversible" regular automata, that is, deterministic automata in which each state can be reached from at most one state by following a transition chain of length k. Formally, if Σ, Q, and δ denote the input alphabet, the state set, and the transition function of an automaton A, respectively, then A is called k-reversible if: ∀a0, ..., ak ∈ Σ ∀s1, s2 ∈ Q: δ(s1, a0...ak) = δ(s2, a0...ak) ⇒ s1 = s2, where δ means the homomorphic extension of δ to arbitrary words. Angluin gives a cubic algorithm for learning of the smallest k-reversible language from a given set of input words; for k = 0, the algorithm has even almost linear complexity. The required state uniqueness after k + 1 given symbols forces unifying automaton states, thus leading to a proper generalization different from the trivial undergeneralized automaton. This algorithm has been used to learn simple parts of English syntax; later, an incremental version has been provided. Another approach based on k-reversible automata is the tail clustering method. === Successor automata === From a given set of input strings, Vernadat and Richetin build a so-called successor automaton, consisting of one state for each distinct character and a transition between each two adjacent characters' states. For example, the singleton input set {aabbaabb} leads to an automaton corresponding to the regular expression (a+⋅b+). An extension of this approach is the predecessor-successor method which generalizes each character repetition immediately to a Kleene + and then includes for each character the set of its possible predecessors in its state. Successor automata can learn exactly the class of local languages. Since each regular language is the homomorphic image of a local language, grammars from the former class can be learned by lifting, if an appropriate (depending on the intended application) homomorphism is provided. In particular, there is such a homomorphism for the class of languages learnable by the predecessor-successor method. The learnability of local languages can be reduced to that of k-reversible languages. === Early approaches === Chomsky and Miller (1957) used the pumping lemma: they guess a part v of an input string uvw and try to build a corresponding cycle into the automaton to be learned; using membership queries they ask, for appropriate k, which of the strings uw, uvvw, uvvvw, ..., uvkw also belongs to the language to be learned, thereby refining the structure of their automaton. In 1959, Solomonoff generalized this approach to context-free languages, which also obey a pumping lemma. === Cover automata === Câmpeanu et al. learn a finite automaton as a compact representation of a large finite language. Given such a language F, they search a so-called cover automaton A such that its language L(A) covers F in the following sense: L(A) ∩ Σ≤ l = F, where l is the length of the longest string in F, and Σ≤ l denotes the set of all strings not longer than l. If such a cover automaton exists, F is uniquely determined by A and l. For example, F = {ad, read, reread } has l = 6 and a cover automaton corresponding to the regular expression (r⋅e)⋅a⋅d. For two strings x and y, Câmpeanu et al. define x ~ y if xz ∈ F ⇔ yz ∈ F for all strings z of a length such that both xz and yz are not longer than l. Based on this relation, whose lack of transitivity causes considerable technical problems, they give an O(n4) algorithm to construct from F a cover automaton A of minimal state count. Moreover, for union, intersection, and difference of two finite languages they provide corresponding operations on their cover automata. Păun et al. improve the time complexity to O(n2). === Residual automata === For a set S of strings and a string u, the Brzozowski derivative u−1S is defined as the set of all rest-strings obtainable from a string in S by cutting off its prefix u (if possible), formally: u−1S = {v ∈ Σ: uv ∈ S}, cf. picture. Denis et al. define a

  Read more →
• 

  Radial basis function

  In mathematics a radial basis function (RBF) is a real-valued function φ {\textstyle \varphi } whose value depends only on the distance between the input and some fixed point, either the origin, so that φ ( x ) = φ ^ ( ‖ x ‖ ) {\textstyle \varphi (\mathbf {x} )={\hat {\varphi }}(\left\|\mathbf {x} \right\|)} , or some other fixed point c {\textstyle \mathbf {c} } , called a center, so that φ ( x ) = φ ^ ( ‖ x − c ‖ ) {\textstyle \varphi (\mathbf {x} )={\hat {\varphi }}(\left\|\mathbf {x} -\mathbf {c} \right\|)} . Any function φ {\textstyle \varphi } that satisfies the property φ ( x ) = φ ^ ( ‖ x ‖ ) {\textstyle \varphi (\mathbf {x} )={\hat {\varphi }}(\left\|\mathbf {x} \right\|)} is a radial function. The distance is usually Euclidean distance, although other metrics are sometimes used. They are often used as a collection { φ k } k {\displaystyle \{\varphi _{k}\}_{k}} which forms a basis for some function space of interest, hence the name. Sums of radial basis functions are typically used to approximate given functions. This approximation process can also be interpreted as a simple kind of neural network; this was the context in which they were originally applied to machine learning, in work by David Broomhead and David Lowe in 1988, which stemmed from Michael J. D. Powell's seminal research from 1977. RBFs are also used as a kernel in support vector classification. The technique has proven effective and flexible enough that radial basis functions are now applied in a variety of engineering applications. == Definition == A radial function is a function φ : [ 0 , ∞ ) → R {\textstyle \varphi :[0,\infty )\to \mathbb {R} } . When paired with a norm ‖ ⋅ ‖ : V → [ 0 , ∞ ) {\textstyle \|\cdot \|:V\to [0,\infty )} on a vector space, a function of the form φ c = φ ( ‖ x − c ‖ ) {\textstyle \varphi _{\mathbf {c} }=\varphi (\|\mathbf {x} -\mathbf {c} \|)} is said to be a radial kernel centered at c ∈ V {\textstyle \mathbf {c} \in V} . A radial function and the associated radial kernels are said to be radial basis functions if, for any finite set of nodes { x k } k = 1 n ⊆ V {\displaystyle \{\mathbf {x} _{k}\}_{k=1}^{n}\subseteq V} , all of the following conditions are true: === Examples === Commonly used types of radial basis functions include (writing r = ‖ x − x i ‖ {\textstyle r=\left\|\mathbf {x} -\mathbf {x} _{i}\right\|} and using ε {\textstyle \varepsilon } to indicate a shape parameter that can be used to scale the input of the radial kernel): == Approximation == Radial basis functions are typically used to build up function approximations of the form where the approximating function y ( x ) {\textstyle y(\mathbf {x} )} is represented as a sum of N {\displaystyle N} radial basis functions, each associated with a different center x i {\textstyle \mathbf {x} _{i}} , and weighted by an appropriate coefficient w i . {\textstyle w_{i}.} The weights w i {\textstyle w_{i}} can be estimated using the matrix methods of linear least squares, because the approximating function is linear in the weights w i {\textstyle w_{i}} . Approximation schemes of this kind have been particularly used in time series prediction and control of nonlinear systems exhibiting sufficiently simple chaotic behaviour and 3D reconstruction in computer graphics (for example, hierarchical RBF and Pose Space Deformation). == RBF Network == The sum can also be interpreted as a rather simple single-layer type of artificial neural network called a radial basis function network, with the radial basis functions taking on the role of the activation functions of the network. It can be shown that any continuous function on a compact interval can in principle be interpolated with arbitrary accuracy by a sum of this form, if a sufficiently large number N {\textstyle N} of radial basis functions is used. The approximant y ( x ) {\textstyle y(\mathbf {x} )} is differentiable with respect to the weights w i {\textstyle w_{i}} . The weights could thus be learned using any of the standard iterative methods for neural networks. Using radial basis functions in this manner yields a reasonable interpolation approach provided that the fitting set has been chosen such that it covers the entire range systematically (equidistant data points are ideal). However, without a polynomial term that is orthogonal to the radial basis functions, estimates outside the fitting set tend to perform poorly. == RBFs for PDEs == Radial basis functions are used to approximate functions and so can be used to discretize and numerically solve Partial Differential Equations (PDEs). This was first done in 1990 by E. J. Kansa who developed the first RBF based numerical method. It is called the Kansa method and was used to solve the elliptic Poisson equation and the linear advection-diffusion equation. The function values at points x {\displaystyle \mathbf {x} } in the domain are approximated by the linear combination of RBFs: The derivatives are approximated as such: where N {\displaystyle N} are the number of points in the discretized domain, d {\displaystyle d} the dimension of the domain and λ {\displaystyle \lambda } the scalar coefficients that are unchanged by the differential operator. Different numerical methods based on Radial Basis Functions were developed thereafter. Some methods are the RBF-FD method, the RBF-QR method and the RBF-PUM method.

  Read more →