AI Email Write Up

AI Email Write Up — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Blanking (video)

  In analog video, blanking occurs between horizontal lines and between frames. In raster scan equipment, an image is built up by scanning an electron beam from left to right across a screen to produce a visible trace of one scan line, reducing the brightness of the beam to zero (horizontal blanking), moving it back as fast as possible to the left of the screen at a slightly lower position (the next scan line), restoring the brightness, and continuing until all the lines have been displayed and the beam is at the bottom right of the screen. Its intensity is then reduced to zero again (vertical blanking), and it is rapidly moved to the top left to start again, creating the next frame. In television, in particular, the vertical blanking interval is long to accommodate the slow equipment available at the time the standard was set. Fast modern electronics allows digital information to be encoded into the signal during the vertical blanking interval; it is not displayed on screen as the beam is blanked, but can be processed by appropriate circuitry.

  Read more →
• 

  Parchive

  Parchive (a portmanteau of parity archive, and formally known as Parity Volume Set Specification) is an erasure code system that produces par files for checksum verification of data integrity, with the capability to perform data recovery operations that can repair or regenerate corrupted or missing data. Parchive was originally written to solve the problem of reliable file sharing on Usenet, but it can be used for protecting any kind of data from data corruption, disc rot, bit rot, and accidental or malicious damage. Despite the name, Parchive uses more advanced techniques (specifically error correction codes) than simplistic parity methods of error detection. As of 2015, PAR1 is obsolete, PAR2 is mature for widespread use, and PAR3 is a discontinued experimental version developed by MultiPar author Yutaka Sawada. The original SourceForge Parchive project has been inactive since April 30, 2015. A new PAR3 specification has been worked on since April 28, 2019 by PAR2 specification author Michael Nahas. An alpha version of the PAR3 specification has been published on January 29, 2022 while the program itself is being developed. == History == Parchive was intended to increase the reliability of transferring files via Usenet newsgroups. Usenet was originally designed for informal conversations, and the underlying protocol, NNTP was not designed to transmit arbitrary binary data. Another limitation, which was acceptable for conversations but not for files, was that messages were normally fairly short in length and limited to 7-bit ASCII text. Various techniques were devised to send files over Usenet, such as uuencoding and Base64. Later Usenet software allowed 8 bit Extended ASCII, which permitted new techniques like yEnc. Large files were broken up to reduce the effect of a corrupted download, but the unreliable nature of Usenet remained. With the introduction of Parchive, parity files could be created that were then uploaded along with the original data files. If any of the data files were damaged or lost while being propagated between Usenet servers, users could download parity files and use them to reconstruct the damaged or missing files. Parchive included the construction of small index files (.par in version 1 and .par2 in version 2) that do not contain any recovery data. These indexes contain file hashes that can be used to quickly identify the target files and verify their integrity. Because the index files were so small, they minimized the amount of extra data that had to be downloaded from Usenet to verify that the data files were all present and undamaged, or to determine how many parity volumes were required to repair any damage or reconstruct any missing files. They were most useful in version 1 where the parity volumes were much larger than the short index files. These larger parity volumes contain the actual recovery data along with a duplicate copy of the information in the index files (which allows them to be used on their own to verify the integrity of the data files if there is no small index file available). In July 2001, Tobias Rieper and Stefan Wehlus proposed the Parity Volume Set specification, and with the assistance of other project members, version 1.0 of the specification was published in October 2001. Par1 used Reed–Solomon error correction to create new recovery files. Any of the recovery files can be used to rebuild a missing file from an incomplete download. Version 1 became widely used on Usenet, but it did suffer some limitations: It was restricted to handle at most 255 files. The recovery files had to be the size of the largest input file, so it did not work well when the input files were of various sizes. (This limited its usefulness when not paired with the proprietary RAR compression tool.) The recovery algorithm had a bug, due to a flaw in the academic paper on which it was based. It was strongly tied to Usenet and it was felt that a more general tool might have a wider audience. In January 2002, Howard Fukada proposed that a new Par2 specification should be devised with the significant changes that data verification and repair should work on blocks of data rather than whole files, and that the algorithm should switch to using 16 bit numbers rather than the 8 bit numbers that PAR1 used. Michael Nahas and Peter Clements took up these ideas in July 2002, with additional input from Paul Nettle and Ryan Gallagher (who both wrote Par1 clients). Version 2.0 of the Parchive specification was published by Michael Nahas in September 2002. Peter Clements then went on to write the first two Par2 implementations, QuickPar and par2cmdline. Abandoned since 2004, Paul Houle created phpar2 to supersede par2cmdline. Yutaka Sawada created MultiPar to supersede QuickPar. MultiPar uses par2j.exe (which is partially based on par2cmdline's optimization techniques) to use as MultiPar's backend engine. == Versions == Versions 1 and 2 of the file format are incompatible. (However, many clients support both.) === Par1 === For Par1, the files f1, f2, ..., fn, the Parchive consists of an index file (f.par), which is CRC type file with no recovery blocks, and a number of "parity volumes" (f.p01, f.p02, etc.). Given all of the original files except for one (for example, f2), it is possible to create the missing f2 given all of the other original files and any one of the parity volumes. Alternatively, it is possible to recreate two missing files from any two of the parity volumes and so forth. Par1 supports up to a total of 256 source and recovery files. === Par2 === Par2 files generally use this naming/extension system: filename.vol000+01.PAR2, filename.vol001+02.PAR2, filename.vol003+04.PAR2, filename.vol007+06.PAR2, etc. The number after the "+" in the filename indicates how many blocks it contains, and the number after "vol" indicates the number of the first recovery block within the PAR2 file. If an index file of a download states that 4 blocks are missing, the easiest way to repair the files would be by downloading filename.vol003+04.PAR2. However, due to the redundancy, filename.vol007+06.PAR2 is also acceptable. There is also an index file filename.PAR2, it is identical in function to the small index file used in PAR1. Par2 specification supports up to 32,768 source blocks and up to 65,535 recovery blocks. Input files are split into multiple equal-sized blocks so that recovery files do not need to be the size of the largest input file. Although Unicode is mentioned in the PAR2 specification as an option, most PAR2 implementations do not support Unicode. Directory support is included in the PAR2 specification, but most or all implementations do not support it. === Par3 === The Par3 specification was originally planned to be published as an enhancement over the Par2 specification. However, to date, it has remained closed source by specification owner Yutaka Sawada. A discussion on a new format started in the GitHub issue section of the maintained fork par2cmdline on January 29, 2019. The discussion led to a new format which is also named as Par3. The new Par3 format's specification is published on GitHub, but remains being an alpha draft as of January 28, 2022. The specification is written by Michael Nahas, the author of Par2 specification, with the help from Yutaka Sawada, animetosho and malaire. The new format claims to have multiple advantages over the Par2 format, including support for: More than 216 files and more than 216 blocks. Packing small files into one block, as well as deduplication when a block appears in multiple files. UTF-8 file names. File permissions, hard links, symbolic/soft links, and empty directories. Embedding PAR data inside other formats, like ZIP archives or ISO disk images. "Incremental backups", where a user creates recovery files for some file or folder, change some data, and create new recovery files reusing some of the older files. More error correction code algorithms (such as LDPC and sparse random matrix). BLAKE3 hashes, dropping support for the MD5 hashes used in PAR2. == Software == === Multi-platform === par2+tbb (GPLv2) — a concurrent (multithreaded) version of par2cmdline 0.4 using TBB. Only compatible with x86 based CPUs. It is available in the FreeBSD Ports system as par2cmdline-tbb. Original par2cmdline — (obsolete). Available in the FreeBSD Ports system as par2cmdline. par2cmdline maintained fork by BlackIkeEagle. par2cmdline-mt is another multithreaded version of par2cmdline using OpenMP, GPLv2, or later. Currently merged into BlackIkeEagle's fork and maintained there. ParPar (CC0) is a high performance, multithreaded PAR2 client and Node.js library. Does not support verifying or repair, it can currently only create PAR2 archives. par2deep (LGPL-3.0) — Produce, verify and repair par2 files recursively, both on the command line as well as with the aid of a graphical user interface. It is available in the Python Package Index system as par2deep. par2cron (MIT License) is an o

  Read more →
• 

  Aidoc

  Aidoc Medical is an Israeli technology company that develops computer-aided simple triage and notification systems. Aidoc has obtained U.S. Food and Drug Administration and CE mark approval for its stroke, pulmonary embolism, cervical fracture, intracranial hemorrhage, intra-abdominal free gas, and incidental pulmonary embolism algorithms. Aidoc algorithms are in use in more than 900 hospitals and imaging centers, including Montefiore Nyack Hospital, LifeBridge Health, LucidHealth, Yale New Haven Hospital, Cedars-Sinai Medical Center, University of Rochester Medical Center, and Sheba Medical Center. == History == Aidoc was founded in 2016 by Elad Walach as the CEO, Michael Braginsky as the CTO and Guy Reiner as the VP. In April 2017, the company raised $7M, led by TLV Partners, and in April 2019, the company raised another $27M, led by Square Peg capital. There have been several additional rounds of funding as well, bringing Aidoc's total investment to $370M as of July 2025. In August 2018, Aidoc gained FDA clearance for its intracranial hemorrhage system, and in May 2019 it received clearance for the pulmonary embolism system. In January 2020, the system for detecting large-vessel occlusions (LVOs) in head CTA examinations obtained FDA clearance. In October 2024, it was reported that Aidoc is working with NVIDIA to develop a framework for deployment and integration of artificial intelligence tools in healthcare. The Blueprint for Resilient Integration and Deployment of Guided Excellence (BRIDGE) is a guideline to facilitate AI adoption in the healthcare industry. == Products and market == Aidoc has developed a suite of artificial intelligence products that flag both time-sensitive and time-consuming (for the radiologist) abnormalities across the body. The algorithms are developed with large quantities of data to provide diagnostic aid for a broad set of pathologies. The company offers an array of algorithms that span across the body, including for intracranial hemorrhage, spine fractures (C, T & L), free air in the abdomen, pulmonary embolism, and more. It developed "Always-on AI", a term coined by Elad Walach that refers to a type of artificial intelligence that is "Always-on—constantly running in the background and automatically analyzing medical imaging data, identifying urgent findings, and sparing radiologists from "drowning" in vast amounts of irrelevant data. Aidoc's solutions cover medical conditions prevalent in all settings (ED/inpatient/outpatient), including level 1 trauma centers, outpatient imaging centers, teleradiology groups and, are set up in over 200 medical centers worldwide. Notable customers include the University of Rochester Medical Center and Global Diagnostics Australia. Aidoc announced in 2024 that its new Clinical AI Reasoning Engine (CARE1) had been submitted for FDA approval. In September 2025 Aidoc received a "Breakthrough Device Designation" from the FDA for a new multi-triage solution that spans numerous acute findings in CT scans. Aidoc's CARE1 foundation model was the basis of the workflow on which the designation was made, enabling simultaneous coverage of multiple pathologies. This new designation allows parallel FDA review of multiple indications under a single submission. In April 2026, Aidoc raised million in a Series E funding round led by Growth Equity at Goldman Sachs Alternatives, with participation from General Catalyst and NVentures. The financing brought the company's total funding to over million. == Clinical Research == A clinical study on Aidoc’ accuracy of deep convolutional neural networks for the detection of pulmonary embolism (PE) on CT pulmonary angiograms (CTPAs) was performed by the University Hospital of Basel and presented at the European Congress of Radiology, showing that the Aidoc algorithm reached 93% sensitivity and 95% specificity. Clinical research has also been performed to test the diagnostic performance of Aidoc's deep learning-based triage system for the flagging of acute findings in abdominal computed tomography (CT) examinations. Overall, the algorithm achieved 93% sensitivity (91/98, 7 false negatives) and 97% specificity (93/96, 3 false-positive) in the detection of acute abdominal findings. Additional clinical research on Aidoc's Intracranial hemorrhage algorithm accuracy was presented at the European Congress of Radiology by Antwerp University Hospital, evaluating the use of its deep learning algorithm for the detection of intracranial hemorrhage on non-contrast enhanced CT of the brain. The University of Washington completed a study on the accuracy of Aidoc's intracranial hemorrhage algorithm.

  Read more →
• 

  Hybrid algorithm

  A hybrid algorithm is an algorithm that combines two or more other algorithms that solve the same problem, either choosing one based on some characteristic of the data, or switching between them over the course of the algorithm. This is generally done to combine desired features of each, so that the overall algorithm is better than the individual components. "Hybrid algorithm" does not refer to simply combining multiple algorithms to solve a different problem – many algorithms can be considered as combinations of simpler pieces – but only to combining algorithms that solve the same problem, but differ in other characteristics, notably performance. == Examples == In computer science, hybrid algorithms are very common in optimized real-world implementations of recursive algorithms, particularly implementations of divide-and-conquer or decrease-and-conquer algorithms, where the size of the data decreases as one moves deeper in the recursion. In this case, one algorithm is used for the overall approach (on large data), but deep in the recursion, it switches to a different algorithm, which is more efficient on small data. A common example is in sorting algorithms, where the insertion sort, which is inefficient on large data, but very efficient on small data (say, five to ten elements), is used as the final step, after primarily applying another algorithm, such as merge sort or quicksort. Merge sort and quicksort are asymptotically optimal on large data, but the overhead becomes significant if applying them to small data, hence the use of a different algorithm at the end of the recursion. A highly optimized hybrid sorting algorithm is Timsort, which combines merge sort, insertion sort, together with additional logic (including binary search) in the merging logic. A general procedure for a simple hybrid recursive algorithm is short-circuiting the base case, also known as arm's-length recursion. In this case whether the next step will result in the base case is checked before the function call, avoiding an unnecessary function call. For example, in a tree, rather than recursing to a child node and then checking if it is null, checking null before recursing. This is useful for efficiency when the algorithm usually encounters the base case many times, as in many tree algorithms, but is otherwise considered poor style, particularly in academia, due to the added complexity. Another example of hybrid algorithms for performance reasons are introsort and introselect, which combine one algorithm for fast average performance, falling back on another algorithm to ensure (asymptotically) optimal worst-case performance. Introsort begins with a quicksort, but switches to a heap sort if quicksort is not progressing well; analogously introselect begins with quickselect, but switches to median of medians if quickselect is not progressing well. Centralized distributed algorithms can often be considered as hybrid algorithms, consisting of an individual algorithm (run on each distributed processor), and a combining algorithm (run on a centralized distributor) – these correspond respectively to running the entire algorithm on one processor, or running the entire computation on the distributor, combining trivial results (a one-element data set from each processor). A basic example of these algorithms are distribution sorts, particularly used for external sorting, which divide the data into separate subsets, sort the subsets, and then combine the subsets into totally sorted data; examples include bucket sort and flashsort. However, in general distributed algorithms need not be hybrid algorithms, as individual algorithms or combining or communication algorithms may be solving different problems. For example, in models such as MapReduce, the Map and Reduce step solve different problems, and are combined to solve a different, third problem.

  Read more →
• 

  Hidden layer

  In artificial neural networks, a hidden layer is a layer of artificial neurons that is neither an input layer nor an output layer. The simplest examples appear in multilayer perceptrons (MLP), as illustrated in the diagram. An MLP without any hidden layer is essentially just a linear model. With hidden layers and activation functions, however, nonlinearity is introduced into the model. In typical machine learning practice, the weights and biases are initialized, then iteratively updated during training via backpropagation.

  Read more →
• 

  Nike+iPod

  The Nike+iPod Sport Kit is an activity tracker device, developed by Nike, Inc., which measures and records the distance and pace of a walk or run. The Nike+iPod consists of a small transmitter device attached to or embedded in a shoe, which communicates with either the Nike+ Sportband, or a receiver plugged into an iPod Nano. It can also work directly with a 2nd Generation iPod Touch (or higher), iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, The Nike+iPod was announced on May 23, 2006. On September 7, 2010, Nike released the Nike+ Running App (originally called Nike+ GPS) on the App Store, which used a tracking engine powered by MotionX that does not require the separate shoe sensor or pedometer. This application works using the accelerometer and GPS of the iPhone and the accelerometer of the iPod Touch, which does not have a GPS chip. Nike+Running is compatible with the iPhone 6 and iPhone 6 Plus down to iPhone 3GS and iPod touch. On June 21, 2012, Nike released Nike+ Running App for Android. The current app is compatible with all Android phones running 4.0.3 and up. == Overview == The sensor and iPod kit were revealed on May 20, 2006. The kit stores information such as the elapsed time of the workout, the distance traveled, pace, and calories burned by the individual. Nike+ was a collaboration between Nike and Apple; the platform consisted of an iPod, a wireless chip, Nike shoes that accepted the wireless chip, an iTunes membership, and a Nike+ online community. iPods using Nike iPod require a sensor and remote. The next upgraded product was the Sportband kit, which was announced in April 2008. The kit allows users to store run information without the iPod Nano. The Sportband consists of two parts: a rubber holding strap which is worn around the wrist, and a receiver which resembles a USB key-disk. The receiver displays information comparable to that of the iPod kit on the built-in display. After a run, the receiver can be plugged straight into a USB port and the software will upload the run information automatically to the Nike+ website. As of August 2008 "Nike+iPod for the Gym" launched, allowing users to record their cardio workouts directly to their iPods. No Sport kit or shoe sensor is required; all that is needed is a compatible iPod (1st–6th generation iPod Nano or 2nd/3rd gen iPod Touch) and an enabled piece of cardio equipment. As of March 2009, the seven largest commercial equipment providers were shipping enabled equipment (Life Fitness, Technogym, Precor USA, Star Trac, Cybex International, Matrix Fitness and Free Motion). The models of compatible cardio equipment include treadmills, stationary bicycles, stair climbers, ellipticals, and others such as Precor's Adaptive Motion Trainer. Once the user syncs an iPod with iTunes, the cardio workouts are automatically stored at Nikeplus.com, where each workout is visualized and tracked based on the number of calories burned. The calories are converted to "CardioMiles", at a ratio of 100:1, allowing cardio users to take full advantage of all the tools and features of Nikeplus.com, and allow them to engage in challenges with other runners, walkers and cardio users, using a common currency. With the release of the second-generation iPod Touch in 2008, Apple Inc. included a built-in ability to receive Nike+ signals, which allowed the iPod to connect directly to the wireless sensor thus eliminating the need for an external receiver to be connected. Apple also added this capability to the iPhone 3GS (released 2009), iPhone 4 (2010), and third-generation iPod Touch (2009). Those devices use their Broadcom Bluetooth chipset to receive the signals. On June 7, 2010, Polar and Nike introduced the Polar WearLink+ that works with Nike+. This new product works with the Nike+ SportBand and the fifth generation iPod nano in conjunction with the Nike+ iPod Sport Kit. Polar WearLink+ that works with Nike+ communicates directly with the fifth generation iPod nano and Nike+ SportBand using a proprietary digital protocol but it is dual-mode so it is also compatible with most Polar training computers (all those using 5 kHz analog transmission technology). Nike+ had 18 million global users as of April 2013. One year later, Nike updated the number of global users to 28 million. In iOS 6.1.2 (and possibly higher), a hole in the compatibility for the app has allowed jailbroken iPad users to use the native Nike + iPod iPhone and iPod app by moving the app bundle and setting permissions for the app. On April 30, 2018, Nike retired services for legacy Nike wearable devices, such as the Nike+ FuelBand and the Nike+ SportWatch GPS, and previous versions of apps, including Nike Run Club and Nike Training Club version 4.X and lower. Likewise, Nike no longer supported the Nike+ Connect software that transferred data to a NikePlus Profile or the Nike+ Fuel/FuelBand and Nike+ Move apps. == Sports kit equipment == The kit consists of two pieces: a piezoelectric sensor with a Nordic Semiconductor nRF2402 transmitter that is mounted under the inner sole of the shoe and a receiver that connects to the iPod. They communicate using a 2.4 GHz wireless radio and use Nordic Semiconductor's "ShockBurst" network protocol. The wireless data is encrypted in transit, but some uniquely identifying data is sent in the plain. The wireless protocol was reverse engineered and documented by Dmitry Grinberg in 2011. Nike recommends that the shoe be a Nike+ model with a special pocket in which to place the device. Nike has released the sensor for individual sale meaning that consumers no longer have to purchase the whole set (the iPod receiver and sensor). As the sensor battery cannot be replaced, a new one must be purchased every time the battery runs out. Aftermarket solutions are available to users who do not want to use shoes with built-in or hand-made pockets for the foot sensor, such as shoe pouches and containment devices designed to affix the sensor against the shoe laces. No matter how the sensor is integrated with the user's shoes, care must be taken that it is firmly fixed in place and will not jerk around while in use, which would degrade the accuracy. == Sports kit usage == The Sports Kit can be used to track running, which it refers to as "workouts". New workouts are started by plugging the receiving unit into the iPod, then navigating through the iPod menu system. The user chooses a goal for the workout, which might be to cover a specific distance, or burn a number of calories, or work out for a specified time. A workout can also be started without a goal, which is called a "Basic Workout". When the workout goal has been set, the receiver seeks the sensor, possibly asking the user to "walk around to activate [the] sensor". The user then must press the center button on the iPod to begin the workout. Audio feedback is provided in the user's choice of generic male or female voice by the iPod over the course of the workout, depending on the type of workout chosen. For goal-oriented workouts, the feedback will correspond to significant milestones toward the goal. In a distance workout, for example, the audio feedback will inform the user as each mile or kilometer has been completed, as well as the half-way point of the workout, and a countdown of four 100-meter increments at the end of the workout. The iPod's control wheel functions change slightly during a workout. The Pause button now not only pauses the music but also the workout. Similarly, the Menu button is used to access the controls to end the workout. The Forward and Back buttons are unchanged, performing audio track skip and reverse functions. The Center button has two functions: audio feedback about the current distance, time, and pace are provided when the button is tapped once, while if the button is held down the iPod skips to the "PowerSong" - an audio track chosen by the user, generally intended for motivation. In addition to the in-workout audio feedback, there are pre-recorded congratulations provided by Lance Armstrong, Tiger Woods, Joan Benoit Samuelson, and Paula Radcliffe whenever a user achieves a personal best (such as fastest mile, fastest 5K, fastest 10K, longest run yet) or reaches certain long-term milestones (such as 250 miles, 500 kilometers). This "celebrity feedback" is heard after the usual end-of-run statistics. While the Sports Kit can be used immediately after purchase, it will report more accurate results if it is calibrated before the first usage and then regularly afterwards. For calibration, the user finds a fixed known distance of at least 0.25 mile or 400 meters and then sets the Nike+ to calibration mode for the walk or run over that distance. When the walk or run is complete, the device calibrates itself and future workout reporting will reflect statistics closer to that individual user's workout style. Consumer Reports magazine tested the device and found it accurate as long as you keep an even pace. In workouts with varied pa

  Read more →
• 

  Gutmann method

  The Gutmann method is an algorithm for securely erasing the contents of computer hard disk drives, such as files. Devised by Peter Gutmann and Colin Plumb and presented in the paper Secure Deletion of Data from Magnetic and Solid-State Memory in July 1996, it involved writing a series of 35 patterns over the region to be erased. The selection of patterns assumes that the user does not know the encoding mechanism used by the drive, so it includes patterns designed specifically for three types of drives. A user who knows which type of encoding the drive uses can choose only those patterns intended for their drive. A drive with a different encoding mechanism would need different patterns. Most of the patterns in the Gutmann method were designed for older MFM/RLL-encoded disks. Gutmann himself has noted that more modern drives no longer use these older encoding techniques, making parts of the method irrelevant. He said "In the time since this paper was published, some people have treated the 35-pass overwrite technique described in it more as a kind of voodoo incantation to banish evil spirits than the result of a technical analysis of drive encoding techniques". Since about 2001, some ATA IDE and SATA hard drive manufacturer designs include support for the ATA Secure Erase standard, obviating the need to apply the Gutmann method when erasing an entire drive. The Gutmann method does not apply to USB sticks: a 2011 study reports that 71.7% of data remained available. On solid state drives it resulted in 0.8–4.3% recovery. == Background == The delete function in most operating systems simply marks the space occupied by the file as reusable (removes the pointer to the file) without immediately removing any of its contents. At this point the file can be fairly easily recovered by numerous recovery applications. However, once the space is overwritten with other data, there is no known way to use software to recover it. It cannot be done with software alone since the storage device only returns its current contents via its normal interface. Gutmann claims that intelligence agencies have sophisticated tools, including magnetic force microscopes, which together with image analysis, can detect the previous values of bits on the affected area of the media (for example hard disk). This claim however seems to be invalid based on the thesis "Data Reconstruction from a Hard Disk Drive using Magnetic Force Microscopy". == Method == An overwrite session consists of a lead-in of four random write patterns, followed by patterns 5 to 31 (see rows of table below), executed in a random order, and a lead-out of four more random patterns. Each of patterns 5 to 31 was designed with a specific magnetic media encoding scheme in mind, which each pattern targets. The drive is written to for all the passes even though the table below only shows the bit patterns for the passes that are specifically targeted at each encoding scheme. The result should obscure any data on the drive so that only the most advanced physical scanning (e.g., using a magnetic force microscope) of the drive is likely to be able to recover any data. The series of patterns is as follows: Encoded bits shown in bold are what should be present in the ideal pattern, although due to the encoding the complementary bit is actually present at the start of the track. == Criticism == Daniel Feenberg of the National Bureau of Economic Research, an American private nonprofit research organization, criticized Gutmann's claim that intelligence agencies are likely to be able to read overwritten data, citing a lack of evidence for such claims. He finds that Gutmann cites one non-existent source and sources that do not actually demonstrate recovery, only partially-successful observations. The definition of "random" is also quite different from the usual one used: Gutmann expects the use of pseudorandom data with sequences known to the recovering side, not an unpredictable one such as a cryptographically secure pseudorandom number generator. Nevertheless, some published government security procedures consider an overwritten disk to still be sensitive. Human factors and potential limitations in the overwriting software create a residual risk that is not considered acceptable at the highest security levels. Gutmann himself has responded to some of these criticisms and also criticized how his algorithm has been abused in an epilogue to his original paper, in which he states: In the time since this paper was published, some people have treated the 35-pass overwrite technique described in it more as a kind of voodoo incantation to banish evil spirits than the result of a technical analysis of drive encoding techniques. As a result, they advocate applying the voodoo to PRML and EPRML drives even though it will have no more effect than a simple scrubbing with random data. In fact performing the full 35-pass overwrite is pointless for any drive since it targets a blend of scenarios involving all types of (normally-used) encoding technology, which covers everything back to 30+-year-old MFM methods (if you don't understand that statement, re-read the paper). If you're using a drive which uses encoding technology X, you only need to perform the passes specific to X, and you never need to perform all 35 passes. For any modern PRML/EPRML drive, a few passes of random scrubbing is the best you can do. As the paper says, "A good scrubbing with random data will do about as well as can be expected". This was true in 1996, and is still true now. Gutmann's statement has been criticized for not recognizing that PRML/EPRML does not replace RLL, with critics claiming PRML/EPRML to be a signal detection method rather than a data encoding method. Polish data recovery service Kaleron has also claimed that Gutmann's publication contains further factual errors and assumptions that do not apply to actual disks.

  Read more →
• 

  Computer and information science

  Computer and information science (CIS; also known as information and computer science) is a field that emphasizes both computing and informatics, upholding the strong association between the fields of information sciences and computer sciences and treating computers as a tool rather than a field. Information science is one with a long history, unlike the relatively very young field of computer science, and is primarily concerned with gathering, storing, disseminating, sharing and protecting any and all forms of information. It is a broad field, covering a myriad of different areas but is often referenced alongside computer science because of the incredibly useful nature of computers and computer programs in helping those studying and doing research in the field – particularly in helping to analyse data and in spotting patterns too broad for a human to intuitively perceive. While information science is sometimes confused with information theory, the two have vastly different subject matter. Information theory focuses on one particular mathematical concept of information while information science is focused on all aspects of the processes and techniques of information. Computer science, in contrast, is less focused on information and its different states, but more, in a very broad sense, on the use of computers – both in theory and practice – to design and implement algorithms in order to aid the processing of information during the different states described above. It has strong foundations in the field of mathematics, as the very first recognised practitioners of the field were renowned mathematicians such as Alan Turing. Information science and computing began to converge in the 1950s and 1960s, as information scientists started to realize the many ways computers would improve information storage and retrieval. == Terminology == Due to the distinction between computers and computing, some of the research groups refer to computing or datalogy. The French refer to computer science as the term informatique. The term information and communications technology (ICT), refers to how humans communicate with using machines and computers, making a distinction from information and computer science, which is how computers use and gain information. Informatics is also distinct from computer science, which encompasses the study of logic and low-level computing issues. == Education == Universities may confer degrees with a major in computer and information science, not to be confused with a more specific Bachelor of Computer Science or respective graduate computer science degrees. The QS World University Rankings is one of the most widely recognised and distinguished university comparisons. They ranked the top 10 universities for computer science and information systems in 2015. They are: Massachusetts Institute of Technology (MIT) Stanford University University of Oxford Carnegie Mellon University Harvard University University of California, Berkeley (UCB) University of Cambridge The Hong Kong University of Science and Technology Swiss Federal Institute of Technology (ETH Zurich) Princeton University A Computer Information Science degree gives students both network and computing knowledge which is needed to design, develop, and assist information systems which helps to solve business problems and to support business problems and to support business operations and decision making at a managerial level also. == Areas of information and computer science == Due to the nature of this field, many topics are also shared with computer science and information systems. The discipline of Information and Computer Science spans a vast range of areas from basic computer science theory (algorithms and computational logic) to in depth analysis of data manipulation and use within technology. === Programming theory === The process of taking a given algorithm and encoding it into a language that can be understood and executed by a computer. There are many different types of programming languages and various different types of computers, however, they all have the same goal: to turn algorithms into machine code. Popular programming languages used within the academic study of CIS include, but are not limited to: Java, Python, C#, C++, Perl, Ruby, Pascal, Swift, Visual Basic. === Information and information systems === The academic study of software and hardware systems that process large quantities and data, support large scale data management and how data can be used. This is where the field is unique from the standard study of computer science. The area of information systems focuses on the networks of hardware and software that are required to process, manipulate and distribute such data. === Computer systems and organisations === The process of analysing computer architecture and various logic circuits. This involves looking at low level computer processes at bit level computation. This is an in-depth look into the hardware processing of a computational system, involving looking at the basic structure of a computer and designing such systems. This can also involve evaluating complex circuit diagrams, and being able to construct these to solve a main problem. The main purpose behind this area of study is to achieve an understanding of how computers function on a basic level, often through tracing machine operations. === Machines, languages, and computation === This is the study into fundamental computer algorithms, which are the basis to computer programs. Without algorithms, no computer programs would exist. This also involves the process of looking into various mathematical functions behind computational algorithms, basic theory and functional (low level) programming. In an academic setting, this area would introduce the fundamental mathematical theorems and functions behind theoretical computer science which are the building blocks for other areas in the field. Complex topics such as; proofs, algebraic functions and sets will be introduced during studies of CIS. == Developments == Information and computer science is a field that is rapidly developing with job prospects for students being extremely promising with 75.7% of graduates gaining employment. Also the IT industry employs one in twenty of the workforce with it predicted to increase nearly five times faster than the average of the UK and between 2012 and 2017 more than half a million people will be needed within the industry and the fact that nine out of ten tech firms are suffering from candidate shortages which is having a negative impact on their business as it delays the creation and development of new products, and it's predicted in the US that in the next decade there will be more than one million jobs in the technology sector than computer science graduates to fill them. Because of this programming is now being taught at an earlier age with an aim to interest students from a young age into computer and information science hopefully leading more children to study this at a higher level. For example, children in England will now be exposed to computer programming at the age of 5 due to an updated national curriculum. == Employment == Due to the wide variety of jobs that now involve computer and information science related tasks, it is difficult to provide a comprehensive list of possible jobs in this area, but some of the key areas are artificial intelligence, software engineering and computer networking and communication. Work in this area also tends to require sufficient understanding of mathematics and science. Moreover, jobs that having a CIS degree can lead to, include: systems analyst, network administrator, system architect, information systems developer, web programmer, or software developer. The earning potential for CIS graduates is quite promising. A 2013 survey from the National Association of Colleges and Employers (NACE) found that the average starting salary for graduates who earned a degree in a computer related field was $59,977, up 4.3% from the prior year. This is higher than other popular degrees such as business ($54,234), education ($40,480) and math and sciences ($42,724). Furthermore, Payscale ranked 129 college degrees based on their graduates earning potential with engineering, math, science, and technology fields dominating the ranking. With eight computer related degrees appearing among the top 30. With the lowest starting salary for these jobs being $49,900. A Rasmussen College article describes various jobs CIS graduates may obtain with software applications developers at the top making a median income of $98,260. According to the National Careers Service an Information Scientist can expect to earn £24,000+ per year as a starting salary.

  Read more →
• 

  Tweak programming environment

  Tweak is a graphical user interface (GUI) layer written by Andreas Raab for the Squeak development environment, which in turn is an integrated development environment based on the Smalltalk-80 computer programming language. Tweak is an alternative to an earlier graphic user interface layer called Morphic. Development began in 2001. Applications that use the Tweak software include Sophie (version 1), a multimedia and e-book authoring system, and a family of virtual world systems: Open Cobalt, Teleplace, OpenQwaq, 3d ICC's Immersive Terf and the Croquet Project. == Influences == An experimental version of Etoys, a programming environment for children, used Tweak instead of Morphic. Etoys was a major influence on a similar Squeak-based programming environment known as Scratch.

  Read more →
• 

  Mathematical knowledge management

  Mathematical knowledge management (MKM) is the study of how society can effectively make use of the vast and growing literature on mathematics. It studies approaches such as databases of mathematical knowledge, automated processing of formulae and the use of semantic information, and artificial intelligence. Mathematics is particularly suited to a systematic study of automated knowledge processing due to the high degree of interconnectedness between different areas of mathematics.

  Read more →
• 

  Algorithmic logic

  Algorithmic logic is a calculus of programs that allows the expression of semantic properties of programs by appropriate logical formulas. It provides a framework that enables proving the formulas from the axioms of program constructs such as assignment, iteration and composition instructions and from the axioms of the data structures in question see Mirkowska & Salwicki (1987), Banachowski et al. (1977). The following diagram helps to locate algorithmic logic among other logics. [ P r o p o s i t i o n a l l o g i c o r S e n t e n t i a l c a l c u l u s ] ⊂ [ P r e d i c a t e c a l c u l u s o r F i r s t o r d e r l o g i c ] ⊂ [ C a l c u l u s o f p r o g r a m s o r Algorithmic logic ] {\displaystyle \qquad \left[{\begin{array}{l}\mathrm {Propositional\ logic} \\or\\\mathrm {Sentential\ calculus} \end{array}}\right]\subset \left[{\begin{array}{l}\mathrm {Predicate\ calculus} \\or\\\mathrm {First\ order\ logic} \end{array}}\right]\subset \left[{\begin{array}{l}\mathrm {Calculus\ of\ programs} \\or\\{\mbox{Algorithmic logic}}\end{array}}\right]} The formalized language of algorithmic logic (and of algorithmic theories of various data structures) contains three types of well formed expressions: Terms - i.e. expressions denoting operations on elements of data structures, formulas - i.e. expressions denoting the relations among elements of data structures, programs - i.e. algorithms - these expressions describe the computations. For semantics of terms and formulas consult pages on first-order logic and Tarski's semantics. The meaning of a program K {\displaystyle K} is the set of possible computations of the program. Algorithmic logic is one of many logics of programs. Another logic of programs is dynamic logic, see dynamic logic, Harel, Kozen & Tiuryn (2000).

  Read more →
• 

  Chandy–Misra–Haas algorithm resource model

  The Chandy–Misra–Haas algorithm resource model checks for deadlock in a distributed system. It was developed by K. Mani Chandy, Jayadev Misra and Laura M. Haas. == Locally dependent == Consider the n processes P1, P2, P3, P4, P5,, ... ,Pn which are performed in a single system (controller). P1 is locally dependent on Pn, if P1 depends on P2, P2 on P3, so on and Pn−1 on Pn. That is, if P 1 → P 2 → P 3 → … → P n {\displaystyle P_{1}\rightarrow P_{2}\rightarrow P_{3}\rightarrow \ldots \rightarrow P_{n}} , then P 1 {\displaystyle P_{1}} is locally dependent on P n {\displaystyle P_{n}} . If P1 is said to be locally dependent to itself if it is locally dependent on Pn and Pn depends on P1: i.e. if P 1 → P 2 → P 3 → … → P n → P 1 {\displaystyle P_{1}\rightarrow P_{2}\rightarrow P_{3}\rightarrow \ldots \rightarrow P_{n}\rightarrow P_{1}} , then P 1 {\displaystyle P_{1}} is locally dependent on itself. == Description == The algorithm uses a message called probe(i,j,k) to transfer a message from controller of process Pj to controller of process Pk. It specifies a message started by process Pi to find whether a deadlock has occurred or not. Every process Pj maintains a boolean array dependent which contains the information about the processes that depend on it. Initially the values of each array are all "false". === Controller sending a probe === Before sending, the probe checks whether Pj is locally dependent on itself. If so, a deadlock occurs. Otherwise it checks whether Pj, and Pk are in different controllers, are locally dependent and Pj is waiting for the resource that is locked by Pk. Once all the conditions are satisfied it sends the probe. === Controller receiving a probe === On the receiving side, the controller checks whether Pk is performing a task. If so, it neglects the probe. Otherwise, it checks the responses given Pk to Pj and dependentk(i) is false. Once it is verified, it assigns true to dependentk(i). Then it checks whether k is equal to i. If both are equal, a deadlock occurs, otherwise it sends the probe to next dependent process. == Algorithm == In pseudocode, the algorithm works as follows: === Controller sending a probe === if Pj is locally dependent on itself then declare deadlock else for all Pj,Pk such that (i) Pi is locally dependent on Pj, (ii) Pj is waiting for 'Pk and (iii) Pj, Pk are on different controllers. send probe(i, j, k). to home site of Pk === Controller receiving a probe === if (i)Pk is idle / blocked (ii) dependentk(i) = false, and (iii) Pk has not replied to all requests of to Pj then begin "dependents""k"(i) = true; if k == i then declare that Pi is deadlocked else for all Pa,Pb such that (i) Pk is locally dependent on Pa, (ii) Pa is waiting for 'Pb and (iii) Pa, Pb are on different controllers. send probe(i, a, b). to home site of Pb end == Example == P1 initiates deadlock detection. C1 sends the probe saying P2 depends on P3. Once the message is received by C2, it checks whether P3 is idle. P3 is idle because it is locally dependent on P4 and updates dependent3(2) to True. As above, C2 sends probe to C3 and C3 sends probe to C1. At C1, P1 is idle so it update dependent1(1) to True. Therefore, deadlock can be declared. == Complexity == Suppose there are n {\displaystyle n} controllers and m {\displaystyle m} processes, at most m ( n − 1 ) / 2 {\displaystyle m(n-1)/2} messages need to be exchanged to detect a deadlock, with a delay of O ( n ) {\displaystyle O(n)} messages.

  Read more →
• 

  Pattern playback

  The pattern playback is an early talking device that was built by Dr. Franklin S. Cooper and his colleagues, including John M. Borst and Caryl Haskins, at Haskins Laboratories in the late 1940s and completed in 1950. There were several different versions of this hardware device. Only one currently survives. The machine converts pictures of the acoustic patterns of speech in the form of a spectrogram back into sound. Using this device, Alvin Liberman, Frank Cooper, and Pierre Delattre (later joined by Katherine Safford Harris, Leigh Lisker, and others) were able to discover acoustic cues for the perception of phonetic segments (consonants and vowels). This research was fundamental to the development of modern techniques of speech synthesis, reading machines for the blind, the study of speech perception and speech recognition, and the development of the motor theory of speech perception. To create sound, the pattern playback machine uses an arc light source which is directed against a rotating disk with 50 concentric tracks whose transparencies vary systematically in order to produce 50 harmonics of a fundamental frequency. The light is further projected against a spectrogram, whose reflectance corresponds to the sound pressure level of the partial of the signal, and is then directed towards a photovoltaic cell by which the light variation is converted into sound pressure variations. The pattern playback was last used in an experimental study by Robert Remez in 1976. The pattern playback now resides in the Museum at Haskins Laboratories in New Haven, Connecticut. The technique of pattern playback also now refers, more generally, to algorithms or techniques for converting spectrograms, cochleagrams, and correlograms from pictures back into sounds. A demonstration is in the TV show Adventure. Pioneering technology in psycholinguistics (CBS Television. 1953). == Digital pattern playback == In the 1970s, digital pattern playbacks began to supplant the earlier version. An early prototype was developed by Patrick Nye, Philip Rubin, and colleagues at Haskins Laboratories. It combined a "Ubiquitous Spectrum Analyzer"[1] for automatic spectral analysis, along with a VAX GT-40 display processor for graphic manipulation of the displayed spectrogram, a form of "synthesis by art", and subsequent re-synthesis using a 40 channel filter bank. This hybrid hardware/software digital pattern playback was eventually replaced at Haskins Laboratories by the HADES analysis and display system, designed by Philip Rubin, and implemented in Fortran on the VAX family of computers. A more modern version has been described by Arai and colleagues [2]. An on-line demonstration is available [3].

  Read more →
• 

  Information school

  Information school (sometimes abbreviated I-school or iSchool) is a university-level institution committed to understanding the role of information in nature and human endeavors. Synonyms include school of information, department of information studies, or information department. Information schools faculty conduct research into the fundamental aspects of information and related technologies. In addition to granting academic degrees, information schools educate information professionals, researchers, and scholars for an increasingly information-driven world. Information school can also refer, in a more restricted sense, to the members of the iSchools organization (formerly the "iSchools Project"), as governed by the iCaucus. Members of this group share a fundamental interest in the relationships between people, information, technology, and science. These schools, colleges, and departments have been either newly established or have evolved from programs focused on information systems, library science, informatics, computer science, library and information science and information science. Information schools promote an interdisciplinary approach to understanding the opportunities and challenges of information management, with a core commitment to concepts like universal access and user-centered organization of information. The field is concerned broadly with questions of design and preservation across information spaces, from digital and virtual spaces like online communities, the World Wide Web, and databases to physical spaces such as libraries, museums, archives, and other repositories. Information school degree programs include course offerings in areas such as data science, information architecture, design, economics, policy, retrieval, security, and telecommunications; knowledge management, user experience design, and usability; conservation and preservation, including digital preservation; librarianship and library administration; the sociology of information; and human–computer interaction.

  Read more →
• 

  Single-source publishing

  Single-source publishing, also known as single-sourcing publishing, is a content management method which allows the same source content to be used across different forms of media and more than one time. The labor-intensive and expensive work of editing need only be carried out once, on only one document; that source document (the single source of truth) can then be stored in one place and reused. This reduces the potential for error, as corrections are only made one time in the source document. The benefits of single-source publishing primarily relate to the editor rather than the user. The user benefits from the consistency that single-sourcing brings to terminology and information. This assumes the content manager has applied an organized conceptualization to the underlying content (A poor conceptualization can make single-source publishing less useful). Single-source publishing is sometimes used synonymously with multi-channel publishing though whether or not the two terms are synonymous is a matter of discussion. == Definition == While there is a general definition of single-source publishing, there is no single official delineation between single-source publishing and multi-channel publishing, nor are there any official governing bodies to provide such a delineation. Single-source publishing is most often understood as the creation of one source document in an authoring tool and converting that document into different file formats or human languages (or both) multiple times with minimal effort. Multi-channel publishing can either be seen as synonymous with single-source publishing, or similar in that there is one source document but the process itself results in more than a mere reproduction of that source. == History == The origins of single-source publishing lie, indirectly, with the release of Windows 3.0 in 1990. With the eclipsing of MS-DOS by graphical user interfaces, help files went from being unreadable text along the bottom of the screen to hypertext systems such as WinHelp. On-screen help interfaces allowed software companies to cease the printing of large, expensive help manuals with their products, reducing costs for both producer and consumer. This system raised opportunities as well, and many developers fundamentally changed the way they thought about publishing. Writers of software documentation did not simply move from being writers of traditional bound books to writers of electronic publishing, but rather they became authors of central documents which could be reused multiple times across multiple formats. The first single-source publishing project was started in 1993 by Cornelia Hofmann at Schneider Electric in Seligenstadt, using software based on Interleaf to automatically create paper documentation in multiple languages based on a single original source file. XML, developed during the mid- to late-1990s, was also significant to the development of single-source publishing as a method. XML, a markup language, allows developers to separate their documentation into two layers: a shell-like layer based on presentation and a core-like layer based on the actual written content. This method allows developers to write the content only one time while switching it in and out of multiple different formats and delivery methods. In the mid-1990s, several firms began creating and using single-source content for technical documentation (Boeing Helicopter, Sikorsky Aviation and Pratt & Whitney Canada) and user manuals (Ford owners manuals) based on tagged SGML and XML content generated using the Arbortext Epic editor with add-on functions developed by a contractor. The concept behind this usage was that complex, hierarchical content that did not lend itself to discrete componentization could be used across a variety of requirements by tagging the differences within a single document using the capabilities built into SGML and XML. Ford, for example, was able to tag its single owner's manual files so that 12 model years could be generated via a resolution script running on the single completed file. Pratt & Whitney, likewise, was able to tag up to 20 subsets of its jet engine manuals in single-source files, calling out the desired version at publication time. World Book Encyclopedia also used the concept to tag its articles for American and British versions of English. Starting from the early 2000s, single-source publishing was used with an increasing frequency in the field of technical translation. It is still regarded as the most efficient method of publishing the same material in different languages. Once a printed manual was translated, for example, the online help for the software program which the manual accompanies could be automatically generated using the method. Metadata could be created for an entire manual and individual pages or files could then be translated from that metadata with only one step, removing the need to recreate information or even database structures. Although single-source publishing is now decades old, its importance has increased urgently as of the 2010s. As consumption of information products rises and the number of target audiences expands, so does the work of developers and content creators. Within the industry of software and its documentation, there is a perception that the choice is to embrace single-source publishing or render one's operations obsolete. == Criticism == Editors using single-source publishing have been criticized for below-standard work quality, leading some critics to describe single-source publishing as the "conveyor belt assembly" of content creation. While heavily used in technical translation, there are risks of error in regard to indexing. While two words might be synonyms in English, they may not be synonyms in another language. In a document produced via single-sourcing, the index will be translated automatically and the two words will be rendered as synonyms. This is because they are synonyms in the source language, while in the target language they are not.

  Read more →