AI Email Builder

AI Email Builder — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Rapid application development

  Rapid application development (RAD), also called rapid application building (RAB), is both a general term for adaptive software development approaches, and the name for James Martin's method of rapid development. In general, RAD approaches to software development put less emphasis on planning and more emphasis on an adaptive process. Prototypes are often used in addition to or sometimes even instead of design specifications. RAD is especially well suited for (although not limited to) developing software that is driven by user interface requirements. Graphical user interface builders are often called rapid application development tools. Other approaches to rapid development include the adaptive, agile, spiral, and unified models. == History == Rapid application development was a response to plan-driven waterfall processes, developed in the 1970s and 1980s, such as the Structured Systems Analysis and Design Method (SSADM). One of the problems with these methods is that they were based on a traditional engineering model used to design and build things like bridges and buildings. Software is an inherently different kind of artifact. Software can change the process used to solve a problem. As a result, knowledge gained from the development process itself can feed back to the requirements and design of the solution. Plan-driven approaches attempt to define requirements, the solution, and the implementation plan, and have a process that discourages changes. RAD approaches, on the other hand, recognize that software development is a knowledge intensive process and provide flexible processes that help take advantage of knowledge gained during the project to improve or adapt the solution. The first such RAD alternative was developed by Barry Boehm and was known as the spiral model. Boehm and other subsequent RAD approaches emphasized developing prototypes as well as or instead of rigorous design specifications. Prototypes had several advantages over traditional specifications: Risk reduction. A prototype could test some of the most difficult potential parts of the system early on in the life-cycle. This can provide valuable information as to the feasibility of a design and can prevent the team from pursuing solutions that turn out to be too complex or time-consuming to implement. This benefit of finding problems earlier in the life-cycle rather than later was a key benefit of the RAD approach. The earlier a problem can be found the cheaper it is to address. Users are better at using and reacting than at creating specifications. In the waterfall model it was common for a user to sign off on a set of requirements but then when presented with an implemented system to suddenly realize that a given design lacked some critical features or was too complex. In general most users give much more useful feedback when they can experience a prototype of the running system rather than abstractly define what that system should be. Prototypes can be usable and can evolve into the completed product. One approach used in some RAD methods was to build the system as a series of prototypes that evolve from minimal functionality to moderately useful to the final completed system. The advantage of this besides the two advantages above was that the users could get useful business functionality much earlier in the process. Starting with the ideas of Barry Boehm and others, James Martin developed the rapid application development approach during the 1980s at IBM and finally formalized it by publishing a book in 1991, Rapid Application Development. This has resulted in some confusion over the term RAD even among IT professionals. It is important to distinguish between RAD as a general alternative to the waterfall model and RAD as the specific method created by Martin. The Martin method was tailored toward knowledge intensive and UI intensive business systems. These ideas were further developed and improved upon by RAD pioneers like James Kerr and Richard Hunter, who together wrote the seminal book on the subject, Inside RAD, which followed the journey of a RAD project manager as he drove and refined the RAD Methodology in real-time on an actual RAD project. These practitioners, and those like them, helped RAD gain popularity as an alternative to traditional systems project life cycle approaches. The RAD approach also matured during the period of peak interest in business re-engineering. The idea of business process re-engineering was to radically rethink core business processes such as sales and customer support with the new capabilities of Information Technology in mind. RAD was often an essential part of larger business re engineering programs. The rapid prototyping approach of RAD was a key tool to help users and analysts "think out of the box" about innovative ways that technology might radically reinvent a core business process. Much of James Martin's comfort with RAD stemmed from Dupont's Information Engineering division and its leader Scott Schultz and their respective relationships with John Underwood who headed up a bespoke RAD development company that pioneered many successful RAD projects in Australia and Hong Kong. Successful projects that included ANZ Bank, Lendlease, BHP, Coca-Cola Amatil, Alcan, Hong Kong Jockey Club and numerous others. Success that led to both Scott Shultz and James Martin both spending time in Australia with John Underwood to understand the methods and details of why Australia was disproportionately successful in implementing significant mission critical RAD projects. == James Martin approach == The James Martin approach to RAD divides the process into four distinct phases: Requirements planning phase – combines elements of the system planning and systems analysis phases of the systems development life cycle (SDLC). Users, managers, and IT staff members discuss and agree on business needs, project scope, constraints, and system requirements. It ends when the team agrees on the key issues and obtains management authorization to continue. User design phase – during this phase, users interact with systems analysts and develop models and prototypes that represent all system processes, inputs, and outputs. The RAD groups or subgroups typically use a combination of joint application design (JAD) techniques and CASE tools to translate user needs into working models. User design is a continuous interactive process that allows users to understand, modify, and eventually approve a working model of the system that meets their needs. Construction phase – focuses on program and application development task similar to the SDLC. In RAD, however, users continue to participate and can still suggest changes or improvements as actual screens or reports are developed. Its tasks are programming and application development, coding, unit-integration and system testing. Cutover phase – resembles the final tasks in the SDLC implementation phase, including data conversion, testing, changeover to the new system, and user training. Compared with traditional methods, the entire process is compressed. As a result, the new system is built, delivered, and placed in operation much sooner. == Advantages == In modern Information Technology environments, many systems are now built using some degree of Rapid Application Development (not necessarily the James Martin approach). In addition to Martin's method, agile methods and the Rational Unified Process are often used for RAD development. The purported advantages of RAD include: Better quality. By having users interact with evolving prototypes the business functionality from a RAD project can often be much higher than that achieved via a waterfall model. The software can be more usable and has a better chance to focus on business problems that are critical to end users rather than technical problems of interest to developers. However, this excludes other categories of what are usually known as Non-functional requirements (AKA constraints or quality attributes) including security and portability. Risk control. Although much of the literature on RAD focuses on speed and user involvement a critical feature of RAD done correctly is risk mitigation. It's worth remembering that Boehm initially characterized the spiral model as a risk based approach. A RAD approach can focus in early on the key risk factors and adjust to them based on empirical evidence collected in the early part of the process. E.g., the complexity of prototyping some of the most complex parts of the system. More projects completed on time and within budget. By focusing on the development of incremental units the chances for catastrophic failures that have dogged large waterfall projects is reduced. In the Waterfall model it was common to come to a realization after six months or more of analysis and development that required a radical rethinking of the entire system. With RAD this kind of information can be discovered and acted upon earlier in the proces

  Read more →
• 

  List of datasets for machine-learning research

  These datasets are used in machine learning (ML) research and have been cited in peer-reviewed academic journals. Datasets are an integral part of the field of machine learning. Major advances in this field can result from advances in learning algorithms (such as deep learning), computer hardware, and, less intuitively, the availability of high-quality training datasets. High-quality labeled training datasets for supervised and semi-supervised machine-learning algorithms are usually difficult and expensive to produce because of the large amount of time needed to label the data. Although they do not need to be labeled, high-quality unlabeled datasets for unsupervised learning can also be difficult and costly to produce. Many organizations, including governments, publish and share their datasets, often using common metadata formats (such as Croissant). The datasets are classified, based on the licenses, into two groups: open data and non-open data. The datasets from various governmental-bodies are presented in List of open government data sites. The datasets are ported on open data portals. They are made available for searching, depositing and accessing through interfaces like Open API. The datasets are made available as various sorted types and subtypes. == List of sorting used for datasets == The data portal is classified based on its type of license. The open source license based data portals are known as open data portals which are used by many government organizations and academic institutions. == List of open data portals == == List of portals suitable for multiple types of applications == The data portal sometimes lists a wide variety of subtypes of datasets pertaining to many machine learning applications. == List of portals suitable for a specific subtype of applications == The data portals which are suitable for a specific subtype of machine learning application are listed in the subsequent sections. == Image data == == Text data == These datasets consist primarily of text for tasks such as natural language processing, sentiment analysis, translation, and cluster analysis. === Reviews === === News articles === === Messages === === Twitter and tweets === === Dialogues === === Legal === === Other text === == Sound data == These datasets consist of sounds and sound features used for tasks such as speech recognition and speech synthesis. === Speech === === Music === === Other sounds === == Signal data == Datasets containing electric signal information requiring some sort of signal processing for further analysis. === Electrical === === Motion-tracking === === Other signals === == Chemical data == Datasets from physical systems. === Chemical Reactions with transition states (TS) === === OpenReACT-CHON-EFH === OpenReACT-CHON-EFH (Open Reaction Dataset of Atomic ConfiguraTions comprising C, H, O and N with Energies, Forces and Hessians) is a 2025 open-access benchmark for machine-learning interatomic potentials. RTP set – 35,087 stationary-point geometries (reactant, transition state and product) drawn from 11,961 elementary reactions, each labeled with density-functional energies, atomic forces and full Hessian matrices at the ωB97X-D/6-31G(d) level. IRC set – 34,248 structures along 600 minimum-energy reaction paths, used to test extrapolation beyond trained stationary points. NMS set – 62,527 off-equilibrium geometries generated by normal-mode sampling to probe model robustness under thermal perturbations. The collection underpins the study Does Hessian Data Improve the Performance of Machine Learning Potentials? and was used to train and benchmark the machine-learning interatomic potentials reported therein. The dataset itself is distributed under a CC licence via Figshare. == Physical data == Datasets from physical systems. === High-energy physics === === Systems === === Astronomy === === Earth science === === Other physical === == Biological data == Datasets from biological systems. === Human === === Animal === === Fungi === === Plant === === Microbe === === Drug discovery === == Anomaly data == == Question answering data == This section includes datasets that deals with structured data. == Dialog or instruction prompted data == This section includes datasets that contains multi-turn text with at least two actors, a "user" and an "agent". The user makes requests for the agent, which performs the request. == Cybersecurity == == Climate and sustainability == == Code data == == Multivariate data == === Financial === === Weather === === Census === === Transit === === Internet === === Games === === Other multivariate === == Curated repositories of datasets == As datasets come in myriad formats and can sometimes be difficult to use, there has been considerable work put into curating and standardizing the format of datasets to make them easier to use for machine learning research. OpenML: Web platform with Python, R, Java, and other APIs for downloading hundreds of machine learning datasets, evaluating algorithms on datasets, and benchmarking algorithm performance against dozens of other algorithms. PMLB: A large, curated repository of benchmark datasets for evaluating supervised machine learning algorithms. Provides classification and regression datasets in a standardized format that are accessible through a Python API. Metatext NLP: https://metatext.io/datasets web repository maintained by community, containing nearly 1000 benchmark datasets, and counting. Provides many tasks from classification to QA, and various languages from English, Portuguese to Arabic. Appen: Off The Shelf and Open Source Datasets hosted and maintained by the company. These biological, image, physical, question answering, signal, sound, text, and video resources number over 250 and can be applied to over 25 different use cases.

  Read more →
• 

  Multilinear subspace learning

  Multilinear subspace learning is an approach for disentangling the causal factor of data formation and performing dimensionality reduction. The Dimensionality reduction can be performed on a data tensor that contains a collection of observations that have been vectorized, or observations that are treated as matrices and concatenated into a data tensor. Here are some examples of data tensors whose observations are vectorized or whose observations are matrices concatenated into data tensor images (2D/3D), video sequences (3D/4D), and hyperspectral cubes (3D/4D). The mapping from a high-dimensional vector space to a set of lower dimensional vector spaces is a multilinear projection. When observations are retained in the same organizational structure as matrices or higher order tensors, their representations are computed by performing linear projections into the column space, row space and fiber space. Multilinear subspace learning algorithms are higher-order generalizations of linear subspace learning methods such as principal component analysis (PCA), independent component analysis (ICA), linear discriminant analysis (LDA) and canonical correlation analysis (CCA). == Background == Multilinear methods may be causal in nature and perform causal inference, or they may be simple regression methods from which no causal conclusion are drawn. Linear subspace learning algorithms are traditional dimensionality reduction techniques that are well suited for datasets that are the result of varying a single causal factor. Unfortunately, they often become inadequate when dealing with datasets that are the result of multiple causal factors. . Multilinear subspace learning can be applied to observations whose measurements were vectorized and organized into a data tensor for causally aware dimensionality reduction. These methods may also be employed in reducing horizontal and vertical redundancies irrespective of the causal factors when the observations are treated as a "matrix" (ie. a collection of independent column/row observations) and concatenated into a tensor. == Algorithms == === Multilinear principal component analysis === Historically, multilinear principal component analysis has been referred to as "M-mode PCA", a terminology which was coined by Peter Kroonenberg. In 2005, Vasilescu and Terzopoulos introduced the Multilinear PCA terminology as a way to better differentiate between multilinear tensor decompositions that computed 2nd order statistics associated with each data tensor mode, and subsequent work on Multilinear Independent Component Analysis that computed higher order statistics for each tensor mode. MPCA is an extension of PCA. === Multilinear independent component analysis === Multilinear independent component analysis is an extension of ICA. === Multilinear linear discriminant analysis === Multilinear extension of LDA TTP-based: Discriminant Analysis with Tensor Representation (DATER) TTP-based: General tensor discriminant analysis (GTDA) TVP-based: Uncorrelated Multilinear Discriminant Analysis (UMLDA) === Multilinear canonical correlation analysis === Multilinear extension of CCA TTP-based: Tensor Canonical Correlation Analysis (TCCA) TVP-based: Multilinear Canonical Correlation Analysis (MCCA) TVP-based: Bayesian Multilinear Canonical Correlation Analysis (BMTF) A TTP is a direct projection of a high-dimensional tensor to a low-dimensional tensor of the same order, using N projection matrices for an Nth-order tensor. It can be performed in N steps with each step performing a tensor-matrix multiplication (product). The N steps are exchangeable. This projection is an extension of the higher-order singular value decomposition (HOSVD) to subspace learning. Hence, its origin is traced back to the Tucker decomposition in 1960s. A TVP is a direct projection of a high-dimensional tensor to a low-dimensional vector, which is also referred to as the rank-one projections. As TVP projects a tensor to a vector, it can be viewed as multiple projections from a tensor to a scalar. Thus, the TVP of a tensor to a P-dimensional vector consists of P projections from the tensor to a scalar. The projection from a tensor to a scalar is an elementary multilinear projection (EMP). In EMP, a tensor is projected to a point through N unit projection vectors. It is the projection of a tensor on a single line (resulting a scalar), with one projection vector in each mode. Thus, the TVP of a tensor object to a vector in a P-dimensional vector space consists of P EMPs. This projection is an extension of the canonical decomposition, also known as the parallel factors (PARAFAC) decomposition. === Typical approach in MSL === There are N sets of parameters to be solved, one in each mode. The solution to one set often depends on the other sets (except when N=1, the linear case). Therefore, the suboptimal iterative procedure in is followed. Initialization of the projections in each mode For each mode, fixing the projection in all the other mode, and solve for the projection in the current mode. Do the mode-wise optimization for a few iterations or until convergence. This is originated from the alternating least square method for multi-way data analysis. == Code == MATLAB Tensor Toolbox by Sandia National Laboratories. The MPCA algorithm written in Matlab (MPCA+LDA included). The UMPCA algorithm written in Matlab (data included). The UMLDA algorithm written in Matlab (data included). == Tensor data sets == 3D gait data (third-order tensors): 128x88x20(21.2M); 64x44x20(9.9M); 32x22x10(3.2M);

  Read more →
• 

  Q-learning

  Q-learning is a reinforcement learning algorithm that trains an agent to assign values to its possible actions based on its current state, without requiring a model of the environment (model-free). It can handle problems with stochastic transitions and rewards without requiring adaptations. For example, in a grid maze, an agent learns to reach an exit worth 10 points. At a junction, Q-learning might assign a higher value to moving right than left if right gets to the exit faster, improving this choice by trying both directions over time. For any finite Markov decision process, Q-learning finds an optimal policy in the sense of maximizing the expected value of the total reward over any and all successive steps, starting from the current state. Q-learning can identify an optimal action-selection policy for any given finite Markov decision process, given infinite exploration time and a partly random policy. "Q" refers to the function that the algorithm computes: the expected reward—that is, the quality—of an action taken in a given state. == Reinforcement learning == Reinforcement learning involves an agent, a set of states S {\displaystyle {\mathcal {S}}} , and a set A {\displaystyle {\mathcal {A}}} of actions per state. By performing an action a ∈ A {\displaystyle a\in {\mathcal {A}}} , the agent transitions from state to state. Executing an action in a specific state provides the agent with a reward (a numerical score). The goal of the agent is to maximize its total reward. It does this by adding the maximum reward attainable from future states to the reward for achieving its current state, effectively influencing the current action by the potential future reward. This potential reward is a weighted sum of expected values of the rewards of all future steps starting from the current state. As an example, consider the process of boarding a train, in which the reward is measured by the negative of the total time spent boarding (alternatively, the cost of boarding the train is equal to the boarding time). One strategy is to enter the train door as soon as they open, minimizing the initial wait time for yourself. If the train is crowded, however, then you will have a slow entry after the initial action of entering the door as people are fighting you to depart the train as you attempt to board. The total boarding time, or cost, is then: 0 seconds wait time + 15 seconds fight time On the next day, by random chance (exploration), you decide to wait and let other people depart first. This initially results in a longer wait time. However, less time is spent fighting the departing passengers. Overall, this path has a higher reward than that of the previous day, since the total boarding time is now: 5 second wait time + 0 second fight time Through exploration, despite the initial (patient) action resulting in a larger cost (or negative reward) than in the forceful strategy, the overall cost is lower, thus revealing a more rewarding strategy. == Algorithm == After Δ t {\displaystyle \Delta t} steps into the future the agent will decide some next step. The weight for this step is calculated as γ Δ t {\displaystyle \gamma ^{\Delta t}} , where γ {\displaystyle \gamma } (the discount factor) is a number between 0 and 1 ( 0 ≤ γ ≤ 1 {\displaystyle 0\leq \gamma \leq 1} ). Assuming γ < 1 {\displaystyle \gamma <1} , it has the effect of valuing rewards received earlier higher than those received later (reflecting the value of a "good start"). γ {\displaystyle \gamma } may also be interpreted as the probability to succeed (or survive) at every step Δ t {\displaystyle \Delta t} . The algorithm, therefore, has a function that calculates the quality of a state–action combination: Q : S × A → R {\displaystyle Q:{\mathcal {S}}\times {\mathcal {A}}\to \mathbb {R} } . Before learning begins, ⁠ Q {\displaystyle Q} ⁠ is initialized to a possibly arbitrary fixed value (chosen by the programmer). Then, at each time t {\displaystyle t} the agent selects an action A t {\displaystyle A_{t}} , observes a reward R t + 1 {\displaystyle R_{t+1}} , enters a new state S t + 1 {\displaystyle S_{t+1}} (that may depend on both the previous state S t {\displaystyle S_{t}} and the selected action), and Q {\displaystyle Q} is updated. The core of the algorithm is a Bellman equation as a simple value iteration update, using the weighted average of the current value and the new information: Q n e w ( S t , A t ) ← ( 1 − α ⏟ learning rate ) ⋅ Q ( S t , A t ) ⏟ current value + α ⏟ learning rate ⋅ ( R t + 1 ⏟ reward + γ ⏟ discount factor ⋅ max a Q ( S t + 1 , a ) ⏟ estimate of optimal future value ⏟ new value (temporal difference target) ) {\displaystyle Q^{new}(S_{t},A_{t})\leftarrow (1-\underbrace {\alpha } _{\text{learning rate}})\cdot \underbrace {Q(S_{t},A_{t})} _{\text{current value}}+\underbrace {\alpha } _{\text{learning rate}}\cdot {\bigg (}\underbrace {\underbrace {R_{t+1}} _{\text{reward}}+\underbrace {\gamma } _{\text{discount factor}}\cdot \underbrace {\max _{a}Q(S_{t+1},a)} _{\text{estimate of optimal future value}}} _{\text{new value (temporal difference target)}}{\bigg )}} where R t + 1 {\displaystyle R_{t+1}} is the reward received when moving from the state S t {\displaystyle S_{t}} to the state S t + 1 {\displaystyle S_{t+1}} , and α {\displaystyle \alpha } is the learning rate ( 0 < α ≤ 1 ) {\displaystyle (0<\alpha \leq 1)} . Note that Q n e w ( S t , A t ) {\displaystyle Q^{new}(S_{t},A_{t})} is the sum of three terms: ( 1 − α ) Q ( S t , A t ) {\displaystyle (1-\alpha )Q(S_{t},A_{t})} : the current value (weighted by one minus the learning rate) α R t + 1 {\displaystyle \alpha \,R_{t+1}} : the reward R t + 1 {\displaystyle R_{t+1}} to obtain if action A t {\displaystyle A_{t}} is taken when in state S t {\displaystyle S_{t}} (weighted by learning rate) α γ max a Q ( S t + 1 , a ) {\displaystyle \alpha \gamma \max _{a}Q(S_{t+1},a)} : the maximum reward that can be obtained from state S t + 1 {\displaystyle S_{t+1}} (weighted by learning rate and discount factor) An episode of the algorithm ends when state S t + 1 {\displaystyle S_{t+1}} is a final or terminal state. However, Q-learning can also learn in non-episodic tasks (as a result of the property of convergent infinite series). If the discount factor is lower than 1, the action values are finite even if the problem can contain infinite loops or paths. For all final states s f {\displaystyle s_{f}} , Q ( s f , a ) {\displaystyle Q(s_{f},a)} is never updated, but is set to the reward value r {\displaystyle r} observed for state s f {\displaystyle s_{f}} . In most cases, Q ( s f , a ) {\displaystyle Q(s_{f},a)} can be taken to equal zero. == Influence of variables == === Learning rate === The learning rate or step size determines to what extent newly acquired information overrides old information. A factor of 0 makes the agent learn nothing (exclusively exploiting prior knowledge), while a factor of 1 makes the agent consider only the most recent information (ignoring prior knowledge to explore possibilities). In fully deterministic environments, a learning rate of α t = 1 {\displaystyle \alpha _{t}=1} is optimal. When the problem is stochastic, the algorithm converges under some technical conditions on the learning rate that require it to decrease to zero. In practice, often a constant learning rate is used, such as α t = 0.1 {\displaystyle \alpha _{t}=0.1} for all t {\displaystyle t} . === Discount factor === The discount factor ⁠ γ {\displaystyle \gamma } ⁠ determines the importance of future rewards. A factor of 0 will make the agent "myopic" (or short-sighted) by only considering current rewards, i.e. r t {\displaystyle r_{t}} (in the update rule above), while a factor approaching 1 will make it strive for a long-term high reward. If the discount factor meets or exceeds 1, the action values may diverge. For ⁠ γ = 1 {\displaystyle \gamma =1} ⁠, without a terminal state, or if the agent never reaches one, all environment histories become infinitely long, and utilities with additive, undiscounted rewards generally become infinite. Even with a discount factor only slightly lower than 1, Q-function learning leads to propagation of errors and instabilities when the value function is approximated with an artificial neural network. In that case, starting with a lower discount factor and increasing it towards its final value accelerates learning. === Initial conditions (Q0) === Since Q-learning is an iterative algorithm, it implicitly assumes an initial condition before the first update occurs. High initial values, also known as "optimistic initial conditions", can encourage exploration: no matter what action is selected, the update rule will cause it to have lower values than the other alternative, thus increasing their choice probability. The first reward r {\displaystyle r} can be used to reset the initial conditions. According to this idea, the first time an action is taken the reward is used to set the value

  Read more →
• 

  Symbol level

  In knowledge-based systems, agents choose actions based on the principle of rationality to move closer to a desired goal. The agent is able to make decisions based on knowledge it has about the world (see knowledge level). But for the agent to actually change its state, it must use whatever means it has available. This level of description for the agent's behavior is the symbol level. The term was coined by Allen Newell in 1982. For example, in a computer program, the knowledge level consists of the information contained in its data structures that it uses to perform certain actions. The symbol level consists of the program's algorithms, the data structures themselves, and so on.

  Read more →
• 

  Analogical modeling

  Analogical modeling (AM) is a formal theory of exemplar based analogical reasoning, proposed by Royal Skousen, professor of Linguistics and English language at Brigham Young University in Provo, Utah. It is applicable to language modeling and other categorization tasks. Analogical modeling is related to connectionism and nearest neighbor approaches, in that it is data-based rather than abstraction-based; but it is distinguished by its ability to cope with imperfect datasets (such as caused by simulated short term memory limits) and to base predictions on all relevant segments of the dataset, whether near or far. In language modeling, AM has successfully predicted empirically valid forms for which no theoretical explanation was known (see the discussion of Finnish morphology in Skousen et al. 2002). == Implementation == === Overview === An exemplar-based model consists of a general-purpose modeling engine and a problem-specific dataset. Within the dataset, each exemplar (a case to be reasoned from, or an informative past experience) appears as a feature vector: a row of values for the set of parameters that define the problem. For example, in a spelling-to-sound task, the feature vector might consist of the letters of a word. Each exemplar in the dataset is stored with an outcome, such as a phoneme or phone to be generated. When the model is presented with a novel situation (in the form of an outcome-less feature vector), the engine algorithmically sorts the dataset to find exemplars that helpfully resemble it, and selects one, whose outcome is the model's prediction. The particulars of the algorithm distinguish one exemplar-based modeling system from another. In AM, we think of the feature values as characterizing a context, and the outcome as a behavior that occurs within that context. Accordingly, the novel situation is known as the given context. Given the known features of the context, the AM engine systematically generates all contexts that include it (all of its supracontexts), and extracts from the dataset the exemplars that belong to each. The engine then discards those supracontexts whose outcomes are inconsistent (this measure of consistency will be discussed further below), leaving an analogical set of supracontexts, and probabilistically selects an exemplar from the analogical set with a bias toward those in large supracontexts. This multilevel search exponentially magnifies the likelihood of a behavior's being predicted as it occurs reliably in settings that specifically resemble the given context. === Analogical modeling in detail === AM performs the same process for each case it is asked to evaluate. The given context, consisting of n variables, is used as a template to generate 2 n {\displaystyle 2^{n}} supracontexts. Each supracontext is a set of exemplars in which one or more variables have the same values that they do in the given context, and the other variables are ignored. In effect, each is a view of the data, created by filtering for some criteria of similarity to the given context, and the total set of supracontexts exhausts all such views. Alternatively, each supracontext is a theory of the task or a proposed rule whose predictive power needs to be evaluated. It is important to note that the supracontexts are not equal peers one with another; they are arranged by their distance from the given context, forming a hierarchy. If a supracontext specifies all of the variables that another one does and more, it is a subcontext of that other one, and it lies closer to the given context. (The hierarchy is not strictly branching; each supracontext can itself be a subcontext of several others, and can have several subcontexts.) This hierarchy becomes significant in the next step of the algorithm. The engine now chooses the analogical set from among the supracontexts. A supracontext may contain exemplars that only exhibit one behavior; it is deterministically homogeneous and is included. It is a view of the data that displays regularity, or a relevant theory that has never yet been disproven. A supracontext may exhibit several behaviors, but contain no exemplars that occur in any more specific supracontext (that is, in any of its subcontexts); in this case it is non-deterministically homogeneous and is included. Here there is no great evidence that a systematic behavior occurs, but also no counterargument. Finally, a supracontext may be heterogeneous, meaning that it exhibits behaviors that are found in a subcontext (closer to the given context), and also behaviors that are not. Where the ambiguous behavior of the nondeterministically homogeneous supracontext was accepted, this is rejected because the intervening subcontext demonstrates that there is a better theory to be found. The heterogeneous supracontext is therefore excluded. This guarantees that we see an increase in meaningfully consistent behavior in the analogical set as we approach the given context. With the analogical set chosen, each appearance of an exemplar (for a given exemplar may appear in several of the analogical supracontexts) is given a pointer to every other appearance of an exemplar within its supracontexts. One of these pointers is then selected at random and followed, and the exemplar to which it points provides the outcome. This gives each supracontext an importance proportional to the square of its size, and makes each exemplar likely to be selected in direct proportion to the sum of the sizes of all analogically consistent supracontexts in which it appears. Then, of course, the probability of predicting a particular outcome is proportional to the summed probabilities of all the exemplars that support it. (Skousen 2002, in Skousen et al. 2002, pp. 11–25, and Skousen 2003, both passim) === Formulas === Given a context with n {\displaystyle n} elements: total number of pairings: n 2 {\displaystyle n^{2}} number of agreements for outcome i: n i 2 {\displaystyle n_{i}^{2}} number of disagreements for outcome i: n i ( n − n i ) {\displaystyle n_{i}(n-n_{i})} total number of agreements: ∑ n i 2 {\displaystyle \sum {n_{i}^{2}}} total number of disagreements: ∑ n i ( n − n i ) = n 2 − ∑ n i 2 {\displaystyle \sum {n_{i}(n-n_{i})}=n^{2}-\sum {n_{i}^{2}}} === Example === This terminology is best understood through an example. In the example used in the second chapter of Skousen (1989), each context consists of three variables with potential values 0-3 Variable 1: 0,1,2,3 Variable 2: 0,1,2,3 Variable 3: 0,1,2,3 The two outcomes for the dataset are e and r, and the exemplars are: 3 1 0 e 0 3 2 r 2 1 0 r 2 1 2 r 3 1 1 r We define a network of pointers like so: The solid lines represent pointers between exemplars with matching outcomes; the dotted lines represent pointers between exemplars with non-matching outcomes. The statistics for this example are as follows: n = 5 {\displaystyle n=5} n r = 4 {\displaystyle n_{r}=4} n e = 1 {\displaystyle n_{e}=1} total number of pairings: n 2 = 25 {\displaystyle n^{2}=25} number of agreements for outcome r: n r 2 = 16 {\displaystyle n_{r}^{2}=16} number of agreements for outcome e: n e 2 = 1 {\displaystyle n_{e}^{2}=1} number of disagreements for outcome r: n r ( n − n r ) = 4 {\displaystyle n_{r}(n-n_{r})=4} number of disagreements for outcome e: n e ( n − n e ) = 4 {\displaystyle n_{e}(n-n_{e})=4} total number of agreements: n r 2 + n e 2 = 17 {\displaystyle n_{r}^{2}+n_{e}^{2}=17} total number of disagreements: n r ( n − n r ) + n e ( n − n e ) = n 2 − ( n r 2 + n e 2 ) = 8 {\displaystyle n_{r}(n-n_{r})+n_{e}(n-n_{e})=n^{2}-(n_{r}^{2}+n_{e}^{2})=8} uncertainty or fraction of disagreement: 8 / 25 = .32 {\displaystyle 8/25=.32} Behavior can only be predicted for a given context; in this example, let us predict the outcome for the context "3 1 2". To do this, we first find all of the contexts containing the given context; these contexts are called supracontexts. We find the supracontexts by systematically eliminating the variables in the given context; with m variables, there will generally be 2 m {\displaystyle 2^{m}} supracontexts. The following table lists each of the sub- and supracontexts; x means "not x", and - means "anything". These contexts are shown in the venn diagram below: The next step is to determine which exemplars belong to which contexts in order to determine which of the contexts are homogeneous. The table below shows each of the subcontexts, their behavior in terms of the given exemplars, and the number of disagreements within the behavior: Analyzing the subcontexts in the table above, we see that there is only 1 subcontext with any disagreements: "3 1 2", which in the dataset consists of "3 1 0 e" and "3 1 1 r". There are 2 disagreements in this subcontext; 1 pointing from each of the exemplars to the other (see the pointer network pictured above). Therefore, only supracontexts containing this subcontext will contain any disagreements. We use a simple rule to identify the homogeneous supraco

  Read more →
• 

  Principal component analysis

  Principal component analysis (PCA) is a linear dimensionality reduction technique with applications in exploratory data analysis, visualization and data preprocessing. The data are linearly transformed onto a new coordinate system such that the directions (principal components) capturing the largest variation in the data can be easily identified. The principal components of a collection of points in a real coordinate space are a sequence of p {\displaystyle p} unit vectors, where the i {\displaystyle i} -th vector is the direction of a line that best fits the data while being orthogonal to the first i − 1 {\displaystyle i-1} vectors. Here, a best-fitting line is defined as one that minimizes the average squared perpendicular distance from the points to the line. These directions (i.e., principal components) constitute an orthonormal basis in which different individual dimensions of the data are linearly uncorrelated. Many studies use the first two principal components in order to plot the data in two dimensions and to visually identify clusters of closely related data points. Principal component analysis has applications in many fields such as population genetics, microbiome studies, and atmospheric science. == Overview == When performing PCA, the first principal component of a set of p {\displaystyle p} variables is the derived variable formed as a linear combination of the original variables that explains the most variance. The second principal component explains the most variance in what is left once the effect of the first component is removed, and we may proceed through p {\displaystyle p} iterations until all the variance is explained. PCA is most commonly used when many of the variables are highly correlated with each other and it is desirable to reduce their number to an independent set. The first principal component can equivalently be defined as a direction that maximizes the variance of the projected data. The i {\displaystyle i} -th principal component can be taken as a direction orthogonal to the first i − 1 {\displaystyle i-1} principal components that maximizes the variance of the projected data. For either objective, it can be shown that the principal components are eigenvectors of the data's covariance matrix. Thus, the principal components are often computed by eigendecomposition of the data covariance matrix or singular value decomposition of the data matrix. PCA is the simplest of the true eigenvector-based multivariate analyses and is closely related to factor analysis. Factor analysis typically incorporates more domain-specific assumptions about the underlying structure and solves eigenvectors of a slightly different matrix. PCA is also related to canonical correlation analysis (CCA). CCA defines coordinate systems that optimally describe the cross-covariance between two datasets while PCA defines a new orthogonal coordinate system that optimally describes variance in a single dataset. Robust and L1-norm-based variants of standard PCA have also been proposed. == History == PCA was invented in 1901 by Karl Pearson, as an analogue of the principal axis theorem in mechanics; it was later independently developed and named by Harold Hotelling in the 1930s. Depending on the field of application, it is also named the discrete Karhunen–Loève transform (KLT) in signal processing, the Hotelling transform in multivariate quality control, proper orthogonal decomposition (POD) in mechanical engineering, singular value decomposition (SVD) of X (invented in the last quarter of the 19th century), eigenvalue decomposition (EVD) of XTX in linear algebra, factor analysis (for a discussion of the differences between PCA and factor analysis see Ch. 7 of Jolliffe's Principal Component Analysis), Eckart–Young theorem (Harman, 1960), or empirical orthogonal functions (EOF) in meteorological science (Lorenz, 1956), empirical eigenfunction decomposition (Sirovich, 1987), quasiharmonic modes (Brooks et al., 1988), spectral decomposition in noise and vibration, and empirical modal analysis in structural dynamics. == Intuition == PCA can be thought of as fitting a p-dimensional ellipsoid to the data, where each axis of the ellipsoid represents a principal component. If some axis of the ellipsoid is small, then the variance along that axis is also small. To find the axes of the ellipsoid, we must first center the values of each variable in the dataset on 0 by subtracting the mean of the variable's observed values from each of those values. These transformed values are used instead of the original observed values for each of the variables. Then, we compute the covariance matrix of the data and calculate the eigenvalues and corresponding eigenvectors of this covariance matrix. Then we must normalize each of the orthogonal eigenvectors to turn them into unit vectors. Once this is done, each of the mutually-orthogonal unit eigenvectors can be interpreted as an axis of the ellipsoid fitted to the data. This choice of basis will transform the covariance matrix into a diagonalized form, in which the diagonal elements represent the variance of each axis. The proportion of the variance that each eigenvector represents can be calculated by dividing the eigenvalue corresponding to that eigenvector by the sum of all eigenvalues. Biplots and scree plots (degree of explained variance) are used to interpret findings of the PCA. == Details == PCA is defined as an orthogonal linear transformation on a real inner product space that transforms the data to a new coordinate system such that the greatest variance by some scalar projection of the data comes to lie on the first coordinate (called the first principal component), the second greatest variance on the second coordinate, and so on. Consider an n × p {\displaystyle n\times p} data matrix, X, with column-wise zero empirical mean (the sample mean of each column has been shifted to zero), where each of the n rows represents a different repetition of the experiment, and each of the p columns gives a particular kind of feature (say, the results from a particular sensor). Mathematically, the transformation is defined by a set of size l {\displaystyle l} (where l {\displaystyle l} is usually selected to be strictly less than p {\displaystyle p} to reduce dimensionality) of p {\displaystyle p} -dimensional vectors of weights or coefficients w ( k ) = ( w 1 , … , w p ) ( k ) {\displaystyle \mathbf {w} _{(k)}=(w_{1},\dots ,w_{p})_{(k)}} that map each row vector x ( i ) = ( x 1 , … , x p ) ( i ) {\displaystyle \mathbf {x} _{(i)}=(x_{1},\dots ,x_{p})_{(i)}} of X to a new vector of principal component scores t ( i ) = ( t 1 , … , t l ) ( i ) {\displaystyle \mathbf {t} _{(i)}=(t_{1},\dots ,t_{l})_{(i)}} , given by t k ( i ) = x ( i ) ⋅ w ( k ) f o r i = 1 , … , n k = 1 , … , l {\displaystyle {t_{k}}_{(i)}=\mathbf {x} _{(i)}\cdot \mathbf {w} _{(k)}\qquad \mathrm {for} \qquad i=1,\dots ,n\qquad k=1,\dots ,l} in such a way that the individual variables t 1 , … , t l {\displaystyle t_{1},\dots ,t_{l}} of t considered over the data set successively inherit the maximum possible variance from X, with each coefficient vector w constrained to be a unit vector. The above may equivalently be written in matrix form as T = X W {\displaystyle \mathbf {T} =\mathbf {X} \mathbf {W} } where T i k = t k ( i ) {\displaystyle {\mathbf {T} }_{ik}={t_{k}}_{(i)}} , X i j = x j ( i ) {\displaystyle {\mathbf {X} }_{ij}={x_{j}}_{(i)}} , and W j k = w j ( k ) {\displaystyle {\mathbf {W} }_{jk}={w_{j}}_{(k)}} . === First component === In order to maximize variance, the first weight vector w(1) thus has to satisfy w ( 1 ) = arg ⁡ max ‖ w ‖ = 1 { ∑ i ( t 1 ) ( i ) 2 } = arg ⁡ max ‖ w ‖ = 1 { ∑ i ( x ( i ) ⋅ w ) 2 } {\displaystyle \mathbf {w} _{(1)}=\arg \max _{\Vert \mathbf {w} \Vert =1}\,\left\{\sum _{i}(t_{1})_{(i)}^{2}\right\}=\arg \max _{\Vert \mathbf {w} \Vert =1}\,\left\{\sum _{i}\left(\mathbf {x} _{(i)}\cdot \mathbf {w} \right)^{2}\right\}} Equivalently, writing this in matrix form gives w ( 1 ) = arg ⁡ max ‖ w ‖ = 1 { ‖ X w ‖ 2 } = arg ⁡ max ‖ w ‖ = 1 { w T X T X w } {\displaystyle \mathbf {w} _{(1)}=\arg \max _{\left\|\mathbf {w} \right\|=1}\left\{\left\|\mathbf {Xw} \right\|^{2}\right\}=\arg \max _{\left\|\mathbf {w} \right\|=1}\left\{\mathbf {w} ^{\mathsf {T}}\mathbf {X} ^{\mathsf {T}}\mathbf {Xw} \right\}} Since w(1) has been defined to be a unit vector, it equivalently also satisfies w ( 1 ) = arg ⁡ max { w T X T X w w T w } {\displaystyle \mathbf {w} _{(1)}=\arg \max \left\{{\frac {\mathbf {w} ^{\mathsf {T}}\mathbf {X} ^{\mathsf {T}}\mathbf {Xw} }{\mathbf {w} ^{\mathsf {T}}\mathbf {w} }}\right\}} The quantity to be maximised can be recognised as a Rayleigh quotient. A standard result for a positive semidefinite matrix such as XTX is that the quotient's maximum possible value is the largest eigenvalue of the matrix, which occurs when w is the corresponding eigenvector. With w(1) found, the first principal component of a data vector

  Read more →
• 

  Multidimensional analysis

  In statistics, econometrics and related fields, multidimensional analysis (MDA) is a data analysis process that groups data into two categories: data dimensions and measurements. For example, a data set consisting of the number of wins for a single football team at each of several years is a single-dimensional (in this case, longitudinal) data set. A data set consisting of the number of wins for several football teams in a single year is also a single-dimensional (in this case, cross-sectional) data set. A data set consisting of the number of wins for several football teams over several years is a two-dimensional data set. == Higher dimensions == In many disciplines, two-dimensional data sets are also called panel data. While, strictly speaking, two- and higher-dimensional data sets are "multi-dimensional", the term "multidimensional" tends to be applied only to data sets with three or more dimensions. For example, some forecast data sets provide forecasts for multiple target periods, conducted by multiple forecasters, and made at multiple horizons. The three dimensions provide more information than can be gleaned from two-dimensional panel data sets. == Software == Computer software for MDA include Online analytical processing (OLAP) for data in relational databases, pivot tables for data in spreadsheets, and Array DBMSs for general multi-dimensional data (such as raster data) in science, engineering, and business.

  Read more →
• 

  CapCut

  CapCut, known domestically as JianYing (Chinese: 剪映; pinyin: Jiǎnyìng) and formerly internationally as ViaMaker, is a video editor developed by ByteDance, available as a mobile app, desktop app, and web app. == History == The app was first released in China in 2019 and was initially available for iPhone and Android. In 2020, it was rebranded in English from ViaMaker to CapCut and became available globally. It later expanded to include web and desktop versions for Mac and Windows. In 2022, CapCut reached 200 million active users. According to The Wall Street Journal, in March 2023, it was the second-most downloaded app in the U.S., behind that of Chinese discount retailer Temu. In January 2025, CapCut had over 1 billion downloads on the Google Play Store. On February 1, 2021, CapCut Pro for Windows was launched. On November 27, the Pro version for Mac was launched. In July 2025, CapCut Pro for HarmonyOS was available on HarmonyOS NEXT tablets. In July 2024, CapCut was reported by the South China Morning Post to be a generative AI (GenAI) application that led global AI app downloads, with approximately 38.42 million downloads and 323 million monthly active users. == Features == CapCut supports basic video editing functions, including editing, trimming, and adding or splitting clips. Editing projects is limited to single-layer editing, but the app supports overlay options that enable additional effects, including multi-layer editing. The app includes a library of pre-made templates and a tool that generates editable video captions. It also provides photo editing tools, including retouch and product photo features integrated within the editing interface. CapCut's video editor includes AI-based features such as video and script generation. Users can export or save completed projects directly to different social media platforms. CapCut includes a free version and a paid Pro version with cloud storage and advanced features. == Controversies == === Illegal data collection === In July 2023, many users of CapCut accused it of illegally profiting off their personal data. A class-action lawsuit filed in the U.S. District Court for the Northern District of Illinois on July 28, 2023, alleged that CapCut illegally harvests and profits from user data including biometric information and geolocation without consent. In September 2025, a federal court excluded most of the lawsuit, which alleged that TikTok’s parent company improperly scraped private data from CapCut's video editing software, as lacking grounds, with some of the class action continuing to move forward. == Bans and restrictions == === Ban in India === As a response to border clashes with China in May 2020, the Indian government banned around 56 Chinese applications including CapCut and TikTok, which is owned by CapCut's parent company ByteDance. Indian users were unable to use and download the application. As of February 2022, around 273 Chinese applications have been banned by the Indian government under the concern of national security and Indian user privacy. === Ban in the United States === On January 18, 2025, at 10 PM EST, CapCut was banned in the United States along with TikTok and all other ByteDance apps due to the implementation of the Protecting Americans from Foreign Adversary Controlled Applications Act. Hours after the suspension of services took effect, President Donald Trump indicated on Truth Social that he would issue an executive order on the day of his inauguration "to extend the period of time before the law's prohibitions take effect". On January 21, CapCut began restoring service. On February 13, Google and Apple restored CapCut on the App Store and Google Play Store.

  Read more →
• 

  Plate notation

  In Bayesian inference, plate notation is a method of representing variables that repeat in a graphical model. Instead of drawing each repeated variable individually, a plate or rectangle is used to group variables into a subgraph that repeat together, and a number is drawn on the plate to represent the number of repetitions of the subgraph in the plate. The assumptions are that the subgraph is duplicated that many times, the variables in the subgraph are indexed by the repetition number, and any links that cross a plate boundary are replicated once for each subgraph repetition. == Example == In this example, we consider Latent Dirichlet allocation, a Bayesian network that models how documents in a corpus are topically related. There are two variables not in any plate; α is the parameter of the uniform Dirichlet prior on the per-document topic distributions, and β is the parameter of the uniform Dirichlet prior on the per-topic word distribution. The outermost plate represents all the variables related to a specific document, including θ i {\displaystyle \theta _{i}} , the topic distribution for document i. The M in the corner of the plate indicates that the variables inside are repeated M times, once for each document. The inner plate represents the variables associated with each of the N i {\displaystyle N_{i}} words in document i: z i j {\displaystyle z_{ij}} is the topic distribution for the jth word in document i, and w i j {\displaystyle w_{ij}} is the actual word used. The N in the corner represents the repetition of the variables in the inner plate N j {\displaystyle N_{j}} times, once for each word in document i. The circle representing the individual words is shaded, indicating that each w i j {\displaystyle w_{ij}} is observable, and the other circles are empty, indicating that the other variables are latent variables. The directed edges between variables indicate dependencies between the variables: for example, each w i j {\displaystyle w_{ij}} depends on z i j {\displaystyle z_{ij}} and β. == Extensions == A number of extensions have been created by various authors to express more information than simply the conditional relationships. However, few of these have become standard. Perhaps the most commonly used extension is to use rectangles in place of circles to indicate non-random variables—either parameters to be computed, hyperparameters given a fixed value (or computed through empirical Bayes), or variables whose values are computed deterministically from a random variable. The diagram on the right shows a few more non-standard conventions used in some articles in Wikipedia (e.g. variational Bayes): Variables that are actually random vectors are indicated by putting the vector size in brackets in the middle of the node. Variables that are actually random matrices are similarly indicated by putting the matrix size in brackets in the middle of the node, with commas separating row size from column size. Categorical variables are indicated by placing their size (without a bracket) in the middle of the node. Categorical variables that act as "switches", and which pick one or more other random variables to condition on from a large set of such variables (e.g. mixture components), are indicated with a special type of arrow containing a squiggly line and ending in a T junction. Boldface is consistently used for vector or matrix nodes (but not categorical nodes). == Software implementation == Plate notation has been implemented in various TeX/LaTeX drawing packages, but also as part of graphical user interfaces to Bayesian statistics programs such as BUGS and BayesiaLab and PyMC.

  Read more →
• 

  Ground truth

  Ground truth is information that is known to be real or true, provided by direct observation and measurement (i.e. empirical evidence) as opposed to information provided by inference. The term ground truth appeared in remote sensing literature as early as 1972, when NASA described it as essential "data about ... materials on the earth's surface" used to calibrate measurements. It was later adopted by the statistical modeling and machine learning communities. == Etymology == The Oxford English Dictionary (s.v. ground truth) records the use of the word Groundtruth in the sense of 'fundamental truth' from Henry Ellison's poem "The Siberian Exile's Tale", published in 1833. == Usage == The term "ground truth" can be used as a noun, adjective, and verb. Noun: "ground truth" (no hyphen). Example: "The ground truth is essential for training accurate models." Adjective: "ground-truth" (hyphenated compound adjective). Example: "We need to use ground-truth data to validate the model." Verb: "to ground-truth" or "to groundtruth" (compound verb,). Example: "We need to ground-truth the results to ensure their accuracy." == Statistics and machine learning == In statistics and machine learning, ground truth is the ideal expected result, used in statistical models to prove or disprove research hypotheses. "Ground truthing" is the process of gathering the good data for this test. Ground truth is typically included in labeled data. In machine learning, "ground truth" is not necessarily objectively correct or true. For example, in training AI models or relevance rankers, it may be a set of judgments made by people or inferred from user behavior, which may depend on context. For example, in Bayesian spam filtering, a supervised learning system is typically trained by examples labeled as spam and non-spam. Although these labels may be subjective or inaccurate, they are considered ground truth. True ground truth in machine learning is objective data. For example, suppose we are testing a stereo vision system to see how well it can estimate 3D positions. A calibrated laser rangefinder may provide accurate distances as ground truth. == Remote sensing == In remote sensing, "ground truth" refers to information collected at the imaged location. Ground truth allows image data to be related to real features and materials on the ground. The collection of ground truth data enables calibration of remote-sensing data, and aids in the interpretation and analysis of what is being sensed. Examples include cartography, meteorology, analysis of aerial photographs, satellite imagery and other techniques in which data are gathered at a distance. More specifically, ground truth may refer to a process in which "pixels" on a satellite image are compared to what is imaged (at the time of capture) in order to verify the contents of the "pixels" in the image (noting that the concept of "pixel" is imaging-system-dependent). In the case of a classified image, supervised classification can help to determine the accuracy of the classification by the remote sensing system which can minimize error in the classification. Ground truth is usually done on site, correlating what is known with surface observations and measurements of various properties of the features of the ground resolution cells under study in the remotely sensed digital image. The process also involves taking geographic coordinates of the ground resolution cell with GPS technology and comparing those with the coordinates of the "pixel" being studied provided by the remote sensing software to understand and analyze the location errors and how it may affect a particular study. Ground truth is important in the initial supervised classification of an image. When the identity and location of land cover types are known through a combination of field work, maps, and personal experience these areas are known as training sites. The spectral characteristics of these areas are used to train the remote sensing software using decision rules for classifying the rest of the image. These decision rules such as Maximum Likelihood Classification, Parallelopiped Classification, and Minimum Distance Classification offer different techniques to classify an image. Additional ground truth sites allow the remote sensor to establish an error matrix that validates the accuracy of the classification method used. Different classification methods may have different percentages of error for a given classification project. It is important that the remote sensor chooses a classification method that works best with the number of classifications used while providing the least amount of error. Ground truth also helps with atmospheric correction. Since images from satellites have to pass through the atmosphere, they can get distorted because of absorption in the atmosphere. So ground truth can help fully identify objects in satellite photos. === Errors of commission === An example of an error of commission is when a pixel reports the presence of a feature (such a tree) that, in reality, is absent (no tree is actually present). Ground truthing ensures that the error matrices have a higher accuracy percentage than would be the case if no pixels were ground-truthed. This value is the complement of the user's accuracy, i.e. Commission Error = 1 - user's accuracy. === Errors of omission === An example of an error of omission is when pixels of a certain type, for example, maple trees, are not classified as maple trees. The process of ground-truthing helps to ensure that the pixel is classified correctly and the error matrices are more accurate. This value is the complement of the producer's accuracy, i.e. Omission Error = 1 - producer's accuracy == Geographical information systems == In GIS the spatial data is modeled as field (like in remote sensing raster images) or as object (like in vectorial map representation). They are modeled from the real world (also named geographical reality), typically by a cartographic process (illustrated). Geographic information systems such as GIS, GPS, and GNSS, have become so widespread that the term "ground truth" has taken on special meaning in that context. If the location coordinates returned by a location method such as GPS are an estimate of a location, then the "ground truth" is the actual location on Earth. A smart phone might return a set of estimated location coordinates such as 43.87870, −103.45901. The ground truth being estimated by those coordinates is the tip of George Washington's nose on Mount Rushmore. The accuracy of the estimate is the maximum distance between the location coordinates and the ground truth. We could say in this case that the estimate accuracy is 10 meters, meaning that the point on Earth represented by the location coordinates is thought to be within 10 meters of George's nose—the ground truth. In slang, the coordinates indicate where we think George Washington's nose is located, and the ground truth is where it really is. In practice a smart phone or hand-held GPS unit is routinely able to estimate the ground truth within 6–10 meters. Specialized instruments can reduce GPS measurement error to under a centimeter. == Military usage == US military slang uses "ground truth" to refer to the facts comprising a tactical situation—as opposed to intelligence reports, mission plans, and other descriptions reflecting the conative or policy-based projections of the industrial·military complex. The term appears in the title of the Iraq War documentary film The Ground Truth (2006), and also in military publications, for example Stars and Stripes saying: "Stripes decided to figure out what the ground truth was in Iraq."

  Read more →
• 

  Grammatical evolution

  Grammatical evolution (GE) is a genetic programming (GP) technique (or approach) from evolutionary computation pioneered by Conor Ryan, JJ Collins and Michael O'Neill in 1998 at the BDS Group in the University of Limerick. As in any other GP approach, the objective is to find an executable program, program fragment, or function, which will achieve a good fitness value for a given objective function. In most published work on GP, a LISP-style tree-structured expression is directly manipulated, whereas GE applies genetic operators to an integer string, subsequently mapped to a program (or similar) through the use of a grammar, which is typically expressed in Backus–Naur form. One of the benefits of GE is that this mapping simplifies the application of search to different programming languages and other structures. == Problem addressed == In type-free, conventional Koza-style GP, the function set must meet the requirement of closure: all functions must be capable of accepting as their arguments the output of all other functions in the function set. Usually, this is implemented by dealing with a single data-type such as double-precision floating point. While modern Genetic Programming frameworks support typing, such type-systems have limitations that Grammatical Evolution does not suffer from. == GE's solution == GE offers a solution to the single-type limitation by evolving solutions according to a user-specified grammar (usually a grammar in Backus-Naur form). Therefore, the search space can be restricted, and domain knowledge of the problem can be incorporated. The inspiration for this approach comes from a desire to separate the "genotype" from the "phenotype": in GP, the objects the search algorithm operates on and what the fitness evaluation function interprets are one and the same. In contrast, GE's "genotypes" are ordered lists of integers which code for selecting rules from the provided context-free grammar. The phenotype, however, is the same as in Koza-style GP: a tree-like structure that is evaluated recursively. This model is more in line with how genetics work in nature, where there is a separation between an organism's genotype and the final expression of phenotype in proteins, etc. Separating genotype and phenotype allows a modular approach. In particular, the search portion of the GE paradigm needn't be carried out by any one particular algorithm or method. Observe that the objects GE performs search on are the same as those used in genetic algorithms. This means, in principle, that any existing genetic algorithm package, such as the popular GAlib, can be used to carry out the search, and a developer implementing a GE system need only worry about carrying out the mapping from list of integers to program tree. It is also in principle possible to perform the search using some other method, such as particle swarm optimization (see the remark below); the modular nature of GE creates many opportunities for hybrids as the problem of interest to be solved dictates. Brabazon and O'Neill have successfully applied GE to predicting corporate bankruptcy, forecasting stock indices, bond credit ratings, and other financial applications. GE has also been used with a classic predator-prey model to explore the impact of parameters such as predator efficiency, niche number, and random mutations on ecological stability. It is possible to structure a GE grammar that for a given function/terminal set is equivalent to genetic programming. == Criticism == Despite its successes, GE has been the subject of some criticism. One issue is that as a result of its mapping operation, GE's genetic operators do not achieve high locality which is a highly regarded property of genetic operators in evolutionary algorithms. == Variants == Although GE was originally described in terms of using an Evolutionary Algorithm, specifically, a Genetic Algorithm, other variants exist. For example, GE researchers have experimented with using particle swarm optimization to carry out the searching instead of genetic algorithms with results comparable to that of normal GE; this is referred to as a "grammatical swarm"; using only the basic PSO model it has been found that PSO is probably equally capable of carrying out the search process in GE as simple genetic algorithms are. (Although PSO is normally a floating-point search paradigm, it can be discretized, e.g., by simply rounding each vector to the nearest integer, for use with GE.) Yet another possible variation that has been experimented with in the literature is attempting to encode semantic information in the grammar in order to further bias the search process. Other work showed that, with biased grammars that leverage domain knowledge, even random search can be used to drive GE. == Related work == GE was originally a combination of the linear representation as used by the Genetic Algorithm for Developing Software (GADS) and Backus Naur Form grammars, which were originally used in tree-based GP by Wong and Leung in 1995 and Whigham in 1996. Other related work noted in the original GE paper was that of Frederic Gruau, who used a conceptually similar "embryonic" approach, as well as that of Keller and Banzhaf, which similarly used linear genomes. == Implementations == There are several implementations of GE. These include the following.

  Read more →
• 

  Decision list

  Decision lists are a representation for Boolean functions which can be easily learned from examples. Single term decision lists are more expressive than disjunctions and conjunctions; however, 1-term decision lists are less expressive than the general disjunctive normal form and the conjunctive normal form. The language specified by a k-length decision list includes as a subset the language specified by a k-depth decision tree. Learning decision lists can be used for attribute efficient learning, a type of machine learning. == Definition == A decision list (DL) of length r is of the form: if f1 then output b1 else if f2 then output b2 ... else if fr then output br where fi is the ith formula and bi is the ith boolean for i ∈ { 1... r } {\displaystyle i\in \{1...r\}} . The last if-then-else is the default case, which means formula fr is always equal to true. A k-DL is a decision list where all of formulas have at most k terms. Sometimes "decision list" is used to refer to a 1-DL, where all of the formulas are either a variable or its negation.

  Read more →
• 

  International Conference on Acoustics, Speech, and Signal Processing

  ICASSP, the International Conference on Acoustics, Speech, and Signal Processing, is an annual flagship conference organized by IEEE Signal Processing Society. Ei Compendex has indexed all papers included in its proceedings. The first ICASSP was held in 1976 in Philadelphia, Pennsylvania, based on the success of a conference in Massachusetts four years earlier that had focused specifically on speech signals. As ranked by Google Scholar's h-index metric in 2016, ICASSP has the highest h-index of any conference in the Signal Processing field. The Brazilian ministry of education gave the conference an 'A1' rating based on its h-index. == Conference list ==

  Read more →
• 

  Modes of variation

  In statistics, modes of variation are a continuously indexed set of vectors or functions that are centered at a mean and are used to depict the variation in a population or sample. Typically, variation patterns in the data can be decomposed in descending order of eigenvalues with the directions represented by the corresponding eigenvectors or eigenfunctions. Modes of variation provide a visualization of this decomposition and an efficient description of variation around the mean. Both in principal component analysis (PCA) and in functional principal component analysis (FPCA), modes of variation play an important role in visualizing and describing the variation in the data contributed by each eigencomponent. In real-world applications, the eigencomponents and associated modes of variation aid to interpret complex data, especially in exploratory data analysis (EDA). == Formulation == Modes of variation are a natural extension of PCA and FPCA. === Modes of variation in PCA === If a random vector X = ( X 1 , X 2 , ⋯ , X p ) T {\displaystyle \mathbf {X} =(X_{1},X_{2},\cdots ,X_{p})^{T}} has the mean vector μ p {\displaystyle {\boldsymbol {\mu }}_{p}} , and the covariance matrix Σ p × p {\displaystyle \mathbf {\Sigma } _{p\times p}} with eigenvalues λ 1 ≥ λ 2 ≥ ⋯ ≥ λ p ≥ 0 {\displaystyle \lambda _{1}\geq \lambda _{2}\geq \cdots \geq \lambda _{p}\geq 0} and corresponding orthonormal eigenvectors e 1 , e 2 , ⋯ , e p {\displaystyle \mathbf {e} _{1},\mathbf {e} _{2},\cdots ,\mathbf {e} _{p}} , by eigendecomposition of a real symmetric matrix, the covariance matrix Σ {\displaystyle \mathbf {\Sigma } } can be decomposed as Σ = Q Λ Q T , {\displaystyle \mathbf {\Sigma } =\mathbf {Q} \mathbf {\Lambda } \mathbf {Q} ^{T},} where Q {\displaystyle \mathbf {Q} } is an orthogonal matrix whose columns are the eigenvectors of Σ {\displaystyle \mathbf {\Sigma } } , and Λ {\displaystyle \mathbf {\Lambda } } is a diagonal matrix whose entries are the eigenvalues of Σ {\displaystyle \mathbf {\Sigma } } . By the Karhunen–Loève expansion for random vectors, one can express the centered random vector in the eigenbasis X − μ = ∑ k = 1 p ξ k e k , {\displaystyle \mathbf {X} -{\boldsymbol {\mu }}=\sum _{k=1}^{p}\xi _{k}\mathbf {e} _{k},} where ξ k = e k T ( X − μ ) {\displaystyle \xi _{k}=\mathbf {e} _{k}^{T}(\mathbf {X} -{\boldsymbol {\mu }})} is the principal component associated with the k {\displaystyle k} -th eigenvector e k {\displaystyle \mathbf {e} _{k}} , with the properties E ⁡ ( ξ k ) = 0 , Var ⁡ ( ξ k ) = λ k , {\displaystyle \operatorname {E} (\xi _{k})=0,\operatorname {Var} (\xi _{k})=\lambda _{k},} and E ⁡ ( ξ k ξ l ) = 0 for l ≠ k . {\displaystyle \operatorname {E} (\xi _{k}\xi _{l})=0\ {\text{for}}\ l\neq k.} Then the k {\displaystyle k} -th mode of variation of X {\displaystyle \mathbf {X} } is the set of vectors, indexed by α {\displaystyle \alpha } , m k , α = μ ± α λ k e k , α ∈ [ − A , A ] , {\displaystyle \mathbf {m} _{k,\alpha }={\boldsymbol {\mu }}\pm \alpha {\sqrt {\lambda _{k}}}\mathbf {e} _{k},\alpha \in [-A,A],} where A {\displaystyle A} is typically selected as 2 or 3 {\displaystyle 2\ {\text{or}}\ 3} . === Modes of variation in FPCA === For a square-integrable random function X ( t ) , t ∈ T ⊂ R p {\displaystyle X(t),t\in {\mathcal {T}}\subset R^{p}} , where typically p = 1 {\displaystyle p=1} and T {\displaystyle {\mathcal {T}}} is an interval, denote the mean function by μ ( t ) = E ⁡ ( X ( t ) ) {\displaystyle \mu (t)=\operatorname {E} (X(t))} , and the covariance function by G ( s , t ) = Cov ⁡ ( X ( s ) , X ( t ) ) = ∑ k = 1 ∞ λ k φ k ( s ) φ k ( t ) , {\displaystyle G(s,t)=\operatorname {Cov} (X(s),X(t))=\sum _{k=1}^{\infty }\lambda _{k}\varphi _{k}(s)\varphi _{k}(t),} where λ 1 ≥ λ 2 ≥ ⋯ ≥ 0 {\displaystyle \lambda _{1}\geq \lambda _{2}\geq \cdots \geq 0} are the eigenvalues and { φ 1 , φ 2 , ⋯ } {\displaystyle \{\varphi _{1},\varphi _{2},\cdots \}} are the orthonormal eigenfunctions of the linear Hilbert–Schmidt operator G : L 2 ( T ) → L 2 ( T ) , G ( f ) = ∫ T G ( s , t ) f ( s ) d s . {\displaystyle G:L^{2}({\mathcal {T}})\rightarrow L^{2}({\mathcal {T}}),\,G(f)=\int _{\mathcal {T}}G(s,t)f(s)ds.} By the Karhunen–Loève theorem, one can express the centered function in the eigenbasis, X ( t ) − μ ( t ) = ∑ k = 1 ∞ ξ k φ k ( t ) , {\displaystyle X(t)-\mu (t)=\sum _{k=1}^{\infty }\xi _{k}\varphi _{k}(t),} where ξ k = ∫ T ( X ( t ) − μ ( t ) ) φ k ( t ) d t {\displaystyle \xi _{k}=\int _{\mathcal {T}}(X(t)-\mu (t))\varphi _{k}(t)dt} is the k {\displaystyle k} -th principal component with the properties E ⁡ ( ξ k ) = 0 , Var ⁡ ( ξ k ) = λ k , {\displaystyle \operatorname {E} (\xi _{k})=0,\operatorname {Var} (\xi _{k})=\lambda _{k},} and E ⁡ ( ξ k ξ l ) = 0 for l ≠ k . {\displaystyle \operatorname {E} (\xi _{k}\xi _{l})=0{\text{ for }}l\neq k.} Then the k {\displaystyle k} -th mode of variation of X ( t ) {\displaystyle X(t)} is the set of functions, indexed by α {\displaystyle \alpha } , m k , α ( t ) = μ ( t ) ± α λ k φ k ( t ) , t ∈ T , α ∈ [ − A , A ] {\displaystyle m_{k,\alpha }(t)=\mu (t)\pm \alpha {\sqrt {\lambda _{k}}}\varphi _{k}(t),\ t\in {\mathcal {T}},\ \alpha \in [-A,A]} that are viewed simultaneously over the range of α {\displaystyle \alpha } , usually for A = 2 or 3 {\displaystyle A=2\ {\text{or}}\ 3} . == Estimation == The formulation above is derived from properties of the population. Estimation is needed in real-world applications. The key idea is to estimate mean and covariance. === Modes of variation in PCA === Suppose the data x 1 , x 2 , ⋯ , x n {\displaystyle \mathbf {x} _{1},\mathbf {x} _{2},\cdots ,\mathbf {x} _{n}} represent n {\displaystyle n} independent drawings from some p {\displaystyle p} -dimensional population X {\displaystyle \mathbf {X} } with mean vector μ {\displaystyle {\boldsymbol {\mu }}} and covariance matrix Σ {\displaystyle \mathbf {\Sigma } } . These data yield the sample mean vector x ¯ {\displaystyle {\overline {\mathbf {x} }}} , and the sample covariance matrix S {\displaystyle \mathbf {S} } with eigenvalue-eigenvector pairs ( λ ^ 1 , e ^ 1 ) , ( λ ^ 2 , e ^ 2 ) , ⋯ , ( λ ^ p , e ^ p ) {\displaystyle ({\hat {\lambda }}_{1},{\hat {\mathbf {e} }}_{1}),({\hat {\lambda }}_{2},{\hat {\mathbf {e} }}_{2}),\cdots ,({\hat {\lambda }}_{p},{\hat {\mathbf {e} }}_{p})} . Then the k {\displaystyle k} -th mode of variation of X {\displaystyle \mathbf {X} } can be estimated by m ^ k , α = x ¯ ± α λ ^ k e ^ k , α ∈ [ − A , A ] . {\displaystyle {\hat {\mathbf {m} }}_{k,\alpha }={\overline {\mathbf {x} }}\pm \alpha {\sqrt {{\hat {\lambda }}_{k}}}{\hat {\mathbf {e} }}_{k},\alpha \in [-A,A].} === Modes of variation in FPCA === Consider n {\displaystyle n} realizations X 1 ( t ) , X 2 ( t ) , ⋯ , X n ( t ) {\displaystyle X_{1}(t),X_{2}(t),\cdots ,X_{n}(t)} of a square-integrable random function X ( t ) , t ∈ T {\displaystyle X(t),t\in {\mathcal {T}}} with the mean function μ ( t ) = E ⁡ ( X ( t ) ) {\displaystyle \mu (t)=\operatorname {E} (X(t))} and the covariance function G ( s , t ) = Cov ⁡ ( X ( s ) , X ( t ) ) {\displaystyle G(s,t)=\operatorname {Cov} (X(s),X(t))} . Functional principal component analysis provides methods for the estimation of μ ( t ) {\displaystyle \mu (t)} and G ( s , t ) {\displaystyle G(s,t)} in detail, often involving point wise estimate and interpolation. Substituting estimates for the unknown quantities, the k {\displaystyle k} -th mode of variation of X ( t ) {\displaystyle X(t)} can be estimated by m ^ k , α ( t ) = μ ^ ( t ) ± α λ ^ k φ ^ k ( t ) , t ∈ T , α ∈ [ − A , A ] . {\displaystyle {\hat {m}}_{k,\alpha }(t)={\hat {\mu }}(t)\pm \alpha {\sqrt {{\hat {\lambda }}_{k}}}{\hat {\varphi }}_{k}(t),t\in {\mathcal {T}},\alpha \in [-A,A].} == Applications == Modes of variation are useful to visualize and describe the variation patterns in the data sorted by the eigenvalues. In real-world applications, modes of variation associated with eigencomponents allow to interpret complex data, such as the evolution of function traits and other infinite-dimensional data. To illustrate how modes of variation work in practice, two examples are shown in the graphs to the right, which display the first two modes of variation. The solid curve represents the sample mean function. The dashed, dot-dashed, and dotted curves correspond to modes of variation with α = ± 1 , ± 2 , {\displaystyle \alpha =\pm 1,\pm 2,} and ± 3 {\displaystyle \pm 3} , respectively. The first graph displays the first two modes of variation of female mortality data from 41 countries in 2003. The object of interest is log hazard function between ages 0 and 100 years. The first mode of variation suggests that the variation of female mortality is smaller for ages around 0 or 100, and larger for ages around 25. An appropriate and intuitive interpretation is that mortality around 25 is driven by accidental death, while around 0 or 100, mortality is related to congenital disease or natural death. Compared to female mortality

  Read more →