AI Detector Xero

AI Detector Xero — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  PenTile matrix family

  PenTile matrix is a family of patented subpixel matrix schemes used in electronic device displays. PenTile is a trademark of Samsung. PenTile matrices are used in AMOLED and LCD displays. These subpixel layouts are specifically designed to operate with proprietary algorithms for subpixel rendering embedded in the display driver, allowing plug and play compatibility with conventional RGB (Red-Green-Blue) stripe panels. == Overview == "PenTile Matrix" (a neologism from penta-, meaning "five" in Greek and tile) describes the geometric layout of the prototypical subpixel arrangement developed in the early 1990s. The layout consists of a quincunx comprising two red subpixels, two green subpixels, and one central blue subpixel in each unit cell. It was inspired by biomimicry of the human retina, which has nearly equal numbers of L and M type cone cells, but significantly fewer S cones. As the S cones are primarily responsible for perceiving blue colors, which do not appreciably affect the perception of luminance, reducing the number of blue subpixels with respect to the red and green subpixels in a display does not reduce the image quality. However, the layout may cause color leakage image distortion, which can be reduced by filters. In some cases the layout causes reduced moiré and blockiness compared to conventional RGB layouts. The PenTile layout is specifically designed to work with and be dependent upon subpixel rendering that uses only one and a quarter subpixel per pixel, on average, to render an image. That is, that any given input pixel is mapped to either a red-centered logical pixel, or a green-centered logical pixel. === History === PenTile was invented by Candice H. Brown Elliott, for which she was awarded the Society for Information Display's Otto Schade Prize in 2014. The technology was licensed by the company Clairvoyante from 2000 until 2008, during which time several prototype PenTile displays were developed by a number of Asian liquid crystal display (LCD) manufacturers. In March 2008, Samsung Electronics acquired Clairvoyante's PenTile IP assets. Samsung then funded a new company, Nouvoyance, Inc. to continue development of the PenTile technology. == PenTile RGBG == PenTile RGBG layout used in AMOLED and plasma displays uses green pixels interleaved with alternating red and blue pixels. The human eye is most sensitive to green, especially for high resolution luminance information. The green subpixels are mapped to input pixels on a one-to-one basis. The red and blue subpixels are subsampled, reconstructing the chroma signal at a lower resolution. The luminance signal is processed using adaptive subpixel rendering filters to optimize reconstruction of high spatial frequencies from the input image, wherein the green subpixels provide the majority of the reconstruction. The red and blue subpixels are capable of reconstructing the horizontal and vertical spatial frequencies, but not the highest of the diagonal. Diagonal high spatial frequency information in the red and blue channels of the input image are transferred to the green subpixels for image reconstruction. Thus the RG-BG scheme creates a color display with one third fewer subpixels than a traditional RGB-RGB scheme but with the same measured luminance display resolution. This is similar to the Bayer filter commonly used in digital cameras. === Devices === As of 2021, "almost all" OLED screens in portable consumer devices use some form of Pentile subpixel layout. == PenTile RGBW == PenTile RGBW technology, used in LCD, adds an extra subpixel to the traditional red, green and blue subpixels that is a clear area without color filtering material and with the only purpose of letting backlight come through, hence W for white. This makes it possible to produce a brighter image compared to an RGB-matrix while using the same amount of power, or produce an equally bright image while using less power. The PenTile RGBW layout uses each red, green, blue and white subpixel to present high-resolution luminance information to the human eyes' red-sensing and green-sensing cone cells, while using the combined effect of all the color subpixels to present lower-resolution chroma (color) information to all three cone cell types. Combined, this optimizes the match of display technology to the biological mechanisms of human vision. The layout uses one third fewer subpixels for the same resolution as the RGB stripe (RGB-RGB) layout, in spite of having four color primaries instead of the conventional three, using subpixel rendering combined with metamer rendering. Metamer rendering optimizes the energy distribution between the white subpixel and the combined red, green, and blue subpixels: W <> RGB, to improve image sharpness. The display driver chip has an RGB to RGBW color vector space converter and gamut mapping algorithm, followed by metamer and subpixel rendering algorithms. In order to maintain saturated color quality, to avoid simultaneous contrast error between saturated colors and peak white brightness, while simultaneously reducing backlight power requirements, the display backlight brightness is under control of the PenTile driver engine. When the image is mostly desaturated colors, those near white or grey, the backlight brightness is significantly reduced, often to less than 50% peak, while the LCD levels are increased to compensate. When the image has very bright saturated colors, the backlight brightness is maintained at higher levels. The PenTile RGBW also has an optional high-brightness mode that doubles the brightness of the desaturated color image areas, such as black-and-white text, for improved outdoor viewability. === Devices === Motorola MC65 Motorola ES55 Motorola ES400 Motorola Atrix 4G Samsung Galaxy Note 10.1 2014 version Lenovo Yoga 2 Pro Lenovo Yoga 3 Pro HP ENVY TouchSmart 14-k022tx Sleekbook MSI GS60 Ghost Pro 4K Lenovo IdeaPad Y50 4K Asus ZenBook UX303LN 4K Asus ZenBook Pro UX501JW LG UH7500/6500/6100 LG ThinQ G7/G7+ Oculus Quest 1 == Controversy == An ongoing controversy regarding the definition or measurement of resolution of color subpixelated flat panel displays led many people to question the resolution claims of PenTile display products. Journalists have noted that in "just about every flat-panel TV in existence, each pixel is composed of one red, one green, and one blue subpixel (RGB), all of uniform size". In traditional flat-panel screens, the resolution is defined by the number of red, green, and blue subpixels, in groups of three, in an array in each axis. As a result, each pixel or group of subpixels can render any colour on the screen, regardless of neighbouring pixels. This is not the case with PenTile screens. The Video Electronics Standards Association (VESA) method of measuring and defining resolution in color displays is to measure the contrast of line pairs, requiring a minimum of 50% Michelson contrast for displays intended for rendering text. The developers of PenTile displays use this VESA criterion for contrast of line pairs to calculate the resolutions specified. In the RGBG layout the alternate red and blue subpixels are 'shared' or sub-sampled with neighboring pixels. Due to the one third lower subpixel density on PenTile displays the pixel structure may be more visible when compared to RGB stripe displays with the same pixel density. The loss of subpixels for a given resolution specification has led some journalists to describe the use of PenTile as "shady practice" and "sort of cheating". For a given size and resolution specification, the PenTile screen can appear grainy, pixelated, speckled, with blurred text on some saturated colors and backgrounds when compared to RGB stripe color. This effect is understood to be caused by the restriction of the number of subpixels that may participate in the image reconstruction when colors are highly saturated to primaries. In the RGBW case, this is caused as the W subpixel will not be available in order to maintain the saturated color. In the RGBG case, this effect will occur when the color boundary is primarily red or blue, as the fully populated (one green per pixel) sub-pixel cannot contribute. For all other cases, text and especially full color images are effectively reconstructed. == Advantages and disadvantages == The PenTile layout reduces the number of subpixels needed to create a specified resolution. Consequently it is possible to achieve an HD resolution on a PenTile AMOLED screen at lower cost than other technologies, and most reviewers note that "300 ppi" (as per VESA - not full pixels) resolution displays (such as Samsung Galaxy S III) make the PenTile effect less obvious than lower resolution PenTile displays (Droid Razr). The second advantage is lower power consumption: the HTC One S's use of a PenTile display makes it more energy efficient and thinner than equivalent LCD screens, giving it better battery life than the HTC One X's IPS LCD. A PenTile AMOLED screen is also

  Read more →
• 

  Social advertising (social relationships)

  Social advertising is advertising that relies on social information or networks in generating, targeting, and delivering marketing communications. Many current examples of social advertising use a particular Internet service to collect social information, establish and maintain relationships with consumers, and for delivering communications. For example, the advertising platforms provided by Google, Twitter, and Facebook involve targeting and presenting ads based on relationships articulated on those same services. Social advertising can be part of a broader social media marketing strategy designed to connect with consumers. == Social targeting == Since a pair of consumers connected via a relationship are more likely to be similar than an unconnected pair, information about such relationships can be used to infer characteristics of consumers useful for targeting. For example, predictions of an individual's home location can be improved using geographic information about their peers. Existing advertising platforms can allow advertisers to explicitly target the peers (e.g., Facebook friends, Twitter followers) of consumers who have a known affiliation with their brand. Thus, one way social advertising is expected to be effective is because social networks encode information about unobserved characteristics of consumers, including their susceptibility to adopt a product and to influence their peers to adopt. Social advertisement targets audiences' demographics based on customers browsing histories. This helped companies understand users' interests and target a specific group of users. Whether it is location or personal interest, different categories of companies can make the consumers on social media rely heavily on their advertisements. This is one of the reasons why social advertising has grown over time. Targeting their audience to real life stakeholders generally increase the attention of the advertised deal which brings up more profits for companies. Subsequently, the psychological effects that social media gives off to its users play a huge role in advertisement companies keeping their customers online. One of the main reasons users rely on social media is because it's a source of entertainment that provides them with a feeling of inclusiveness. In making the customers feel the inclusiveness, social advertising targeting a specific group of users is presented as if these advertisements are customized for the users in their perspective making them feel the attention that they do not often feel in the real world. You can use Social signals checker tool to find more information about links. Social signals are metrics that measure how much people interact with your content on social media. From likes, to shares, to comments; each of these signals contributes to an overall number that tells search engines like Google how much people like your content. The more social signals your website gets, the more likely it is to rank higher in Google. The reason for this is two-fold. First, social media is used by millions of people every day, and if your content is being shared and interacted with on these sites, it shows that it’s worthy of being seen. And second, social media sites are highly trusted by Google. So if you can get your content seen and interacted with on these platforms, you’ll be off to a great start. == Social cues in advertisements == Social ads often include information about the affiliation of a peer with an advertised entity. For example, a social ad might indicate a friend has endorsed a product, highly rated a restaurant, or watched a particular film. In fact, some definitions make these personalized social signals a necessary condition for the advertising being social advertising. Inclusion of personalized social signals creates a channel for social influence. Experiments that remove peers' names or images from social advertisements provide evidence that their presence increases proximal outcomes (e.g., clicks on advertisements). This is technically how trends are started on social media. Since social media links a single profile to thousands of other accounts some being real-life friends or even acquaintances, the opinions and the bias a user has for other users who are also a customer of an advertisement on the feed can heavily affect whether to click on the advertisement or not. Once this pattern continues, the brand benefits from increased customers, profit, and attention. Social networking can spread rapidly because 71 percent of the world's population contributes and uses social media which means social advertising gives companies a better marketing technique than a physical poster advertisement. == Word of mouth == Advertisers often attempt to use word of mouth to affect consumers and their decisions to adopt products and services. Ads and other inducements targeted at a seed set of individuals can be designed to produce a larger cascade of adoption through influence. Businesses are also using social media to attempt to identify and persuade influential consumers to spread positive messages about their products or services. Consequently, not only on social platforms but also in physical settings, users start talking to each other. When individuals develop an intimate relationship with each other, it is quite heavily based on shared characteristics, interests, and personalities. If one social media user becomes a regular customer to a well-known company that advertises often, there is a higher chance that all the other people who have intimate relationships with that one customer will be exposed to the online advertisement more than another user who might be completely new to a brand that is being advertised on screen. In reality, this happens to not only one user but to most of the users which mean a single brand advertisement online can have to potential of being talked about between billions and trillions of people all around the globe. == Relationship marketing == To accurately conduct relationship marketing, businesses must develop and manage six marketplaces: internal, customer, referral, supplier, influencer and employee. To maintain relationship marketing, customers often see social media influencers getting free sponsorships or PR boxes just to advertise their products. At times, users who become customers through these social influencers will get a better deal than regular customers which stands as a very commonly used marketing technique. By doing this, users think they are receiving special treatment when in reality it very much benefits social influencers and brands. Especially for brands that are just starting, they use this marketing technique so that their names can be out there, and people will start talking, which is their initial goal.

  Read more →
• 

  Influencer

  An influencer is an individual who has the capacity to shape the attitudes, behavior, or decisions of others through authority, knowledge, position, or the nature of the relationship with the audience. The term is used in various fields such as media, business, politics, religion, and communication, referring to influencers such as social media influencers, podcasters, public speakers, religious influencers, writers, and newsletter writers etc who have dedicated followings in various areas. One writer defines influencers as "a range of third parties who exercise influence over the organization and its potential customers." Another writer defines an influencer as a "third party who significantly shapes the customer's purchasing decision but may never be accountable for it." According to another writer, influencers are "well-connected, create an impact, have active minds, and are trendsetters". Just because a person has many followers does not necessarily mean they have much influence over those people. In contemporary usage, the term frequently refers to a social media influencer, (also known as an online influencer or simply influencer) a person who builds a grassroots online presence through engaging content such as photos, videos, and updates. This is done by using direct audience interaction to establish authenticity, expertise, and appeal, and by standing apart from traditional celebrities by growing their platform through social media rather than pre-existing fame. The modern referent of the term is commonly a paid role in which a business entity pays for the social media influence-for-hire activity to promote its products and services, known as influencer marketing. A 1% increase in spending on influencer marketing can lead to a 0.5% increase in audience engagement. As such, an influencer effectively acts as a modern salesperson or a marketer. Types of influencers include fashion influencer, travel influencer, and virtual influencer, and they involve content creators and streamers. Some influencers are associated primarily with specific social media apps such as TikTok, Instagram, or Pinterest; many influencers are also considered internet celebrities. As of 2023, Instagram is the social media platform businesses spend the most advertising money towards marketing with influencers. However, influencers can have an impact on any social media network. == History == === Origins === The word influencer in its general sense of a person or thing that exerts influence, is attested in historical sources at least since the 17th century. The Oxford English Dictionary (OED) gives 1664 as the earliest example of usage and cites a sentence from Henry More's A Modest Enquiry into the Mystery of Iniquity: "The head and influencer of the whole Church". The origins of online influencing can be traced back to the emergence of digital blogs and platforms in the early 2000s. Nevertheless, recent studies demonstrate that Instagram, an application with more than one billion users, harbors the majority of the influencer demographic. These individuals are sometimes referred to as "Instagrammers" or "Instafamous". A crucial aspect of influencing is their association with sponsors. The 2015 debut of Vamp, a company that links influencers with sponsorships, transformed the landscape of influencing. There is much debate about whether social media influencers can be considered celebrities, as their path to fame is often less traditional and arguably easier. Melody Nouri addressed the differences between the two types in her article "The Power of Influence: Traditional Celebrities vs Social Media Influencer". Nouri asserts that social media platforms have a greater negative impact on young, impressionable audiences in comparison with traditional media such as magazines, billboards, advertisements, and tabloids featuring celebrities. Online, it is thought to be simpler to manipulate an image and lifestyle in such a way that viewers are more susceptible to believing it. One theory considers the former American First Lady Eleanor Roosevelt (1884–1962) to be the "original media influencer." While she achieved celebrity in her role as First Lady, she built a global personal brand as a wise, informative, trustworthy American woman. Her voice was her own, unrestricted by political advisors and powerful men, and with it, Roosevelt exerted unprecedented social and cultural influence in radio, print, public speaking, film, and television until she died. In one notable example, it may have been Roosevelt's television support of John F. Kennedy which nudged his "hairline victory" during the 1960 Presidential campaign. In another example, David Ogilvy paid Roosevelt more than a quarter of a million dollars in today's currency to make a TV commercial for Good Luck margarine (1959), in which Roosevelt also managed to mention world hunger. As a content creator, she wrote My Day, a popular daily newspaper column that ran nationwide for twenty-six years. Like a social media post, My Day covered all aspects of her life, and in it Roosevelt often recommended movies, books, and products that she admired. Roosevelt also had a hand in designing all three of her public affairs television shows. Unlike contemporary influencers, she was less motivated by a pay-to-play situation than by a desire to educate and inspire; but she did use her influence to benefit the entertainment industry careers of her children, and she welcomed the revenue that her influence bought, most of which was donated to charity. === 2000s === The early 2000s showed corporate endeavors to leverage the internet for influence, with some companies participating in forums for promotions or providing bloggers with complimentary products in return for favorable reviews. A few of these practices were viewed as unethical for taking advantage of the labor of young individuals without providing remuneration. In 2004, The Blogstar Network was established by Ted Murphy of MindComet. Bloggers were encouraged to join an email list and receive remunerated offers from corporations in exchange for creating specific posts. For instance, bloggers were compensated for writing reviews of fast-food meals on their blogs. Blogstar is widely regarded as the first influencer marketing network. Murphy succeeded Blogstar with PayPerPost, which was introduced in 2006. This platform compensated significant posters on prominent forums and social media platforms for every post made about a corporate product. Payment rates were determined by the influencer's status. Though very popular, PayPerPost, received a great deal of criticism as these influencers were not required to disclose their involvement with PayPerPost as traditional journalism would have. With the success of PayPerPost, the public became aware that there was a drive for corporate interests to influence what some people were posting to these sites. The platform also incentivized other firms to establish comparable programs. Despite concerns, marketing networks with influencers continued to grow throughout the 2000s and into the 2010s. The influencer marketing industry was worth as much as $8 billion in 2019, according to estimates from Business Insider Intelligence, which are based on Mediakix data. Evan Asano, the Former CEO and founder of the agency Mediakix, previously spoke with Business Insider and said he believed influencer marketing on Instagram would continue to grow despite likes being hidden. === 2010s === By the 2010s, the term "influencer" described digital content creators with a large following, distinctive brand persona, and a patterned relationship with commercial sponsors. By this period, influencer marketing had become a widely researched field globally, with systematic reviews drawing on hundreds of studies that documented the growing role of authenticity, audience engagement, and parasocial relationships in shaping how consumers responded to influencer content across different markets. During this period, influencer culture also developed through distinct channels outside Western markets. In South Korea, the global spread of Korean pop culture, also called K-Pop, through platforms such as YouTube, Facebook, and Twitter gave rise to what scholars have called 'Hallyu 2.0' or the 'New Korean Wave', where fans throughout Southeast Asia, North America, Latin America, and Europe shared, subtitled, and redistributed Korean music and film content on a large scale. This helped Korean entertainers to build substantial followings internationally. Consumers often mistakenly view celebrities as reliable, leading to trust and confidence in the products being promoted. A 2001 study from Rutgers University discovered that individuals were using "internet forums as influential sources of consumer information." The study proposes that consumers preferred internet forums and social media when making purchasing decisions over conventional advertising and print sources. An in

  Read more →
• 

  HashClash

  HashClash was a volunteer computing project running on the Berkeley Open Infrastructure for Network Computing (BOINC) software platform to find collisions in the MD5 hash algorithm. It was based at Department of Mathematics and Computer Science at the Eindhoven University of Technology, and Marc Stevens initiated the project as part of his master's degree thesis. The project ended after Stevens defended his M.Sc. thesis in June 2007. However, SHA1 was added later, and the code repository was ported to git in 2017. The project was used to create a rogue certificate authority certificate in 2009.

  Read more →
• 

  Tango (platform)

  Tango (named Project Tango while in testing) was an augmented reality computing platform, developed and authored by the Advanced Technology and Projects (ATAP), a skunkworks division of Google. It used computer vision to enable mobile devices, such as smartphones and tablets, to detect their position relative to the world around them without using GPS or other external signals. This allowed application developers to create user experiences that include indoor navigation, 3D mapping, physical space measurement, environmental recognition, augmented reality, and windows into a virtual world. The first product to emerge from ATAP, Tango was developed by a team led by computer scientist Johnny Lee, a core contributor to Microsoft's Kinect. In an interview in June 2015, Lee said, "We're developing the hardware and software technologies to help everything and everyone understand precisely where they are, anywhere." Google produced two devices to demonstrate the Tango technology: the Peanut phone and the Yellowstone 7-inch tablet. More than 3,000 of these devices had been sold as of June 2015, chiefly to researchers and software developers interested in building applications for the platform. In the summer of 2015, Qualcomm and Intel both announced that they were developing Tango reference devices as models for device manufacturers who use their mobile chipsets. At CES, in January 2016, Google announced a partnership with Lenovo to release a consumer smartphone during the summer of 2016 to feature Tango technology marketed at consumers, noting a less than $500 price-point and a small form factor below 6.5 inches. At the same time, both companies also announced an application incubator to get applications developed to be on the device on launch. On 15 December 2017, Google announced that they would be ending support for Tango on March 1, 2018, in favor of ARCore. == Overview == Tango was different from other contemporary 3D-sensing computer vision products, in that it was designed to run on a standalone mobile phone or tablet and was chiefly concerned with determining the device's position and orientation within the environment. The software worked by integrating three types of functionality: Motion-tracking: using visual features of the environment, in combination with accelerometer and gyroscope data, to closely track the device's movements in space Area learning: storing environment data in a map that can be re-used later, shared with other Tango devices, and enhanced with metadata such as notes, instructions, or points of interest Depth perception: detecting distances, sizes, and surfaces in the environment Together, these generate data about the device in "six degrees of freedom" (3 axes of orientation plus 3 axes of position) and detailed three-dimensional information about the environment. Project Tango was also the first project to graduate from Google X in 2012 Applications on mobile devices use Tango's C and Java APIs to access this data in real time. In addition, an API was also provided for integrating Tango with the Unity game engine; this enabled the conversion or creation of games that allow the user to interact and navigate in the game space by moving and rotating a Tango device in real space. These APIs were documented on the Google developer website. == Applications == Tango enabled apps to track a device's position and orientation within a detailed 3D environment, and to recognize known environments. This allowed the creations of applications such as in-store navigation, visual measurement and mapping utilities, presentation and design tools, and a variety of immersive games. At Augmented World Expo 2015, Johnny Lee demonstrated a construction game that builds a virtual structure in real space, an AR showroom app that allows users to view a full-size virtual automobile and customize its features, a hybrid Nerf gun with mounted Tango screen for dodging and shooting AR monsters superimposed on reality, and a multiplayer VR app that lets multiple players converse in a virtual space where their avatar movements match their real-life movements. Tango apps are distributed through Play. Google has encouraged the development of more apps with hackathons, an app contest, and promotional discounts on the development tablet. == Devices == As a platform for software developers and a model for device manufacturers, Google created two Tango devices. === The Peanut phone === "Peanut" was the first production Tango device, released in the first quarter of 2014. It was a small Android phone with a Qualcomm MSM8974 quad-core processor and additional special hardware including a fisheye motion camera, "RGB-IR" camera for color image and infrared depth detection, and Movidius Vision processing units. A high-performance accelerometer and gyroscope were added after testing several competing models in the MARS lab at the University of Minnesota. Several hundred Peanut devices were distributed to early-access partners including university researchers in computer vision and robotics, as well as application developers and technology startups. Google stopped supporting the Peanut device in September 2015, as by then the Tango software stack had evolved beyond the versions of Android that run on the device. === The Yellowstone tablet === "Yellowstone" was a 7-inch tablet with full Tango functionality, released in June 2014, and sold as the Project Tango Tablet Development Kit. It featured a 2.3 GHz quad-core Nvidia Tegra K1 processor, 128GB flash memory, 1920x1200-pixel touchscreen, 4MP color camera, fisheye-lens (motion-tracking) camera, an IR projector with RGB-IR camera for integrated depth sensing, and 4G LTE connectivity. As of May 27, 2017, the Tango tablet is considered officially unsupported by Google. ==== Testing by NASA ==== In May 2014, two Peanut phones were delivered to the International Space Station to be part of a NASA project to develop autonomous robots that navigate in a variety of environments, including outer space. The soccer-ball-sized, 18-sided polyhedral SPHERES robots were developed at the NASA Ames Research Center, adjacent to the Google campus in Mountain View, California. Andres Martinez, SPHERES manager at NASA, said "We are researching how effective [Tango's] vision-based navigation abilities are for performing localization and navigation of a mobile free flyer on ISS. === Intel RealSense smartphone === Announced at Intel's Developer Forum in August 2015, and offered to public through a Developer Kit since January 2016. It incorporated a RealSense ZR300 camera which had optical features required for Tango, such as the fisheye camera. === Lenovo Phab 2 Pro === Lenovo Phab 2 Pro was the first commercial smartphone with the Tango Technology, the device was announced at the beginning of 2016, launched in August, and available for purchase in the US in November. The Phab 2 Pro had a 6.4 inch screen, a Snapdragon 652 processor, and 64 GB of internal storage, with a rear facing 16 Megapixels camera and 8 MP front camera. === Asus Zenfone AR === Asus Zenfone AR, announced at CES 2017, was the second commercial smartphone with the Tango Technology. It ran Tango AR & Daydream VR on Snapdragon 821, with 6GB or 8GB of RAM and 128 or 256GB of internal memory depending on the configuration.

  Read more →
• 

  Copyright

  A copyright is a type of intellectual property that gives its owner the exclusive legal right to copy, distribute, adapt, display, and perform a creative work, usually for a limited time. The creative work may be in a literary, artistic, educational, or musical form. Copyright is intended to protect the original expression of an idea in the form of a creative work, but not the idea itself. A copyright is subject to limitations based on public interest considerations, such as the fair use doctrine in the United States and fair dealing doctrine in the United Kingdom. Some jurisdictions require "fixing" copyrighted works in a tangible form. It is often shared among multiple authors, each of whom holds a set of rights to use or license the work, and who are commonly referred to as rights holders. These rights normally include reproduction, control over derivative works, distribution, public performance, and moral rights such as attribution. Copyrights can be granted by public law and are in that case considered "territorial rights". This means that copyrights granted by the law of a certain state do not extend beyond the territory of that specific jurisdiction. Copyrights of this type vary by country; many countries, and sometimes a large group of countries, have made agreements with other countries on procedures applicable when works "cross" national borders or national rights are inconsistent. Typically, the public law duration of a copyright expires 50 to 100 years after the creator dies, depending on the jurisdiction. Some countries require certain copyright formalities to establishing copyright, others recognize copyright in any completed work, without a formal registration. When the copyright of a work expires, it enters the public domain. == History == === Background === The concept of copyright developed after the printing press came into use in Europe in the 15th and 16th centuries. It was associated with a common law and rooted in the civil law system. The printing press made it much cheaper to produce works, but as there was initially no copyright law, anyone could buy or rent a press and print any text. Popular new works were immediately re-set and re-published by competitors, so printers needed a constant stream of new material. Fees paid to authors for new works were high and significantly supplemented the incomes of many academics. Printing brought profound social changes. The rise in literacy across Europe led to a dramatic increase in the demand for reading matter. Prices of reprints were low, so publications could be bought by poorer people, creating a mass audience. In German-language markets before the advent of copyright, technical materials, like academic papers and handbooks, were inexpensive and widely available; it has been suggested this contributed to Germany's industrial and economic success. === Conception === The concept of copyright first developed in England. In reaction to the printing of "scandalous books and pamphlets", the English Parliament passed the Licensing of the Press Act 1662, which required all intended publications to be registered with the government-approved Stationers' Company, giving the Stationers the right to regulate what material could be printed. The Statute of Anne, enacted in 1710 in England and Scotland, provided the first legislation to protect copyrights (but not authors' rights). The Copyright Act 1814 extended more rights for authors but did not protect British publications from being reprinted in the US. The Berne International Copyright Convention of 1886 finally provided protection for authors among the countries who signed the agreement, although the US did not join the Berne Convention until 1989. In the US, the Constitution grants Congress the right to establish copyright and patent laws. Shortly after the Constitution was passed, Congress enacted the Copyright Act of 1790, modeling it after the Statute of Anne. While the national law protected authors' published works, authority was granted to the states to protect authors' unpublished works. The most recent major overhaul of copyright in the US, the Copyright Act of 1976, extended federal copyright to works as soon as they are created and "fixed", without requiring publication or registration. State law continues to apply to unpublished works that are not otherwise copyrighted by federal law. This act also changed the calculation of copyright term from a fixed term (then a maximum of fifty-six years) to "life of the author plus 50 years". These changes brought the US closer to conformity with the Berne Convention, and in 1989 the United States further revised its copyright law and joined the Berne Convention officially. Copyright laws allow products of creative human activities, such as literary and artistic production, to be preferentially exploited and thus incentivized. Different cultural attitudes, social organizations, economic models and legal frameworks are seen to account for why copyright emerged in Europe and not, for example, in Asia. In the Middle Ages in Europe, there was generally a lack of any concept of literary property due to the general relations of production, the specific organization of literary production and the role of culture in society. The latter refers to the tendency of oral societies, such as that of Europe in the medieval period, to view knowledge as the product and expression of the collective, rather than to see it as individual property. However, with copyright laws, intellectual production comes to be seen as a product of an individual, with attendant rights. The most significant point is that patent and copyright laws support the expansion of the range of creative human activities that can be commodified. This parallels the ways in which capitalism led to the commodification of many aspects of social life that earlier had no monetary or economic value perse. Copyright has developed into a concept that has a significant effect on nearly every modern industry, including not just literary work, but also forms of creative work such as sound recordings, films, photographs, software, and architecture. === National copyrights === Often seen as the first real copyright law, the 1709 British Statute of Anne gave authors and the publishers to whom they did chose to license their works, the right to publish the author's creations for a fixed period, after which the copyright expired. It was "An Act for the Encouragement of Learning, by Vesting the Copies of Printed Books in the Authors or the Purchasers of such Copies, during the Times therein mentioned." The act also alluded to individual rights of the artist. It began: "Whereas Printers, Booksellers, and other Persons, have of late frequently taken the Liberty of Printing ... Books, and other Writings, without the Consent of the Authors ... to their very great Detriment, and too often to the Ruin of them and their Families:". A right to benefit financially from the work is articulated, and court rulings and legislation have recognized a right to control the work, such as ensuring that the integrity of it is preserved. An irrevocable right to be recognized as the work's creator appears in some countries' copyright laws. The Copyright Clause of the United States, Constitution (1787) authorized copyright legislation: "To promote the Progress of Science and useful Arts, by securing for limited Times to Authors and Inventors the exclusive Right to their respective Writings and Discoveries." That is, by guaranteeing them a period of time in which they alone could profit from their works, they would be enabled and encouraged to invest the time required to create them, and this would be good for society as a whole. A right to profit from the work has been the philosophical underpinning for much legislation extending the duration of copyright, to the life of the creator and beyond, to their heirs. Yet scholars like Lawrence Lessig have argued that copyright terms have been extended beyond the scope imagined by the Framers. Lessig refers to the Copyright Clause as the "Progress Clause" to emphasize the social dimension of intellectual property rights. The original length of copyright in the United States was 14 years, and it had to be explicitly applied for. If the author wished, they could apply for a second 14‑year monopoly grant, but after that the work entered the public domain, so it could be used and built upon by others. === Continental law === In many jurisdictions of the European continent, comparable legal concepts to copyright did exist from the 16th century on but did change under Napoleonic rule into another legal concept: authors' rights or creator's right laws, from French: droits d'auteur and German Urheberrecht. In many modern-day publications the terms copyright and authors' rights are being mixed, or used as translations, but in a juridical sense the legal concepts do essentially differ. Authors' rights are, generally speaking,

  Read more →
• 

  Frame (networking)

  A frame is a digital data transmission unit in computer networking and telecommunications. In packet switched systems, a frame is a simple container for a single network packet. In other telecommunications systems, a frame is a repeating structure supporting time-division multiplexing. A frame typically includes frame synchronization features consisting of a sequence of bits or symbols that indicate to the receiver the beginning and end of the payload data within the stream of symbols or bits it receives. If a receiver is connected to the system during frame transmission, it ignores the data until it detects a new frame synchronization sequence. == Packet switching == In the OSI model of computer networking, a frame is the protocol data unit at the data link layer. Frames are the result of the final layer of encapsulation before the data is transmitted over the physical layer. A frame is "the unit of transmission in a link layer protocol, and consists of a link layer header followed by a packet." Each frame is separated from the next by an interframe gap. A frame is a series of bits generally composed of frame synchronization bits, the packet payload, and a frame check sequence. Examples are Ethernet frames, Wi-Fi frames, 4G frames, Point-to-Point Protocol (PPP) frames, Fibre Channel frames, and V.42 modem frames. Often, frames of several different sizes are nested inside each other. For example, when using Point-to-Point Protocol (PPP) over asynchronous serial communication, the eight bits of each individual byte are framed by start and stop bits, the payload data bytes in a network packet are framed by the header and footer, and several packets can be framed with frame boundary octets. == Time-division multiplex == In telecommunications, specifically in time-division multiplex (TDM) and time-division multiple access (TDMA) variants, a frame is a cyclically repeated data block that consists of a fixed number of time slots, one for each logical TDM channel or TDMA transmitter. In this context, a frame is typically an entity at the physical layer. TDM application examples are SONET/SDH and the ISDN circuit-switched B-channel, while TDMA examples are Circuit Switched Data used in early cellular voice services. The frame is also an entity for time-division duplex, where the mobile terminal may transmit during some time slots and receive during others.

  Read more →
• 

  Change data capture

  In databases, change data capture (CDC) is a set of software design patterns used to determine and track the data that has changed (the "deltas") so that action can be taken using the changed data. The result is a delta-driven dataset. CDC is an approach to data integration that is based on the identification, capture and delivery of the changes made to enterprise data sources. For instance it can be used for incremental update of data loading. CDC occurs often in data warehouse environments since capturing and preserving the state of data across time is one of the core functions of a data warehouse, but CDC can be utilized in any database or data repository system. == Methodology == System developers can set up CDC mechanisms in a number of ways and in any one or a combination of system layers from application logic down to physical storage. In a simplified CDC context, one computer system has data believed to have changed from a previous point in time, and a second computer system needs to take action based on that changed data. The former is the source, the latter is the target. It is possible that the source and target are the same system physically, but that would not change the design pattern logically. Multiple CDC solutions can exist in a single system. === Timestamps on rows === Tables whose changes must be captured may have a column that represents the time of last change. Names such as LAST_UPDATE, LAST_MODIFIED, etc. are common. Any row in any table that has a timestamp in that column that is more recent than the last time data was captured is considered to have changed. Timestamps on rows are also frequently used for optimistic locking so this column is often available. === Version numbers on rows === Database designers give tables whose changes must be captured a column that contains a version number. Names such as VERSION_NUMBER, etc. are common. One technique is to mark each changed row with a version number. A current version is maintained for the table, or possibly a group of tables. This is stored in a supporting construct such as a reference table. When a change capture occurs, all data with the latest version number is considered to have changed. Once the change capture is complete, the reference table is updated with a new version number. (Do not confuse this technique with row-level versioning used for optimistic locking. For optimistic locking each row has an independent version number, typically a sequential counter. This allows a process to atomically update a row and increment its counter only if another process has not incremented the counter. But CDC cannot use row-level versions to find all changes unless it knows the original "starting" version of every row. This is impractical to maintain.) === Status indicators on rows === This technique can either supplement or complement timestamps and versioning. It can configure an alternative if, for example, a status column is set up on a table row indicating that the row has changed (e.g., a boolean column that, when set to true, indicates that the row has changed). Otherwise, it can act as a complement to the previous methods, indicating that a row, despite having a new version number or a later date, still shouldn't be updated on the target (for example, the data may require human validation). === Time/version/status on rows === This approach combines the three previously discussed methods. As noted, it is not uncommon to see multiple CDC solutions at work in a single system, however, the combination of time, version, and status provides a particularly powerful mechanism and programmers should utilize them as a trio where possible. The three elements are not redundant or superfluous. Using them together allows for such logic as, "Capture all data for version 2.1 that changed between 2005-06-01 00:00 and 2005-07-01 00:00 where the status code indicates it is ready for production." === Triggers on tables === May include a publish/subscribe pattern to communicate the changed data to multiple targets. In this approach, triggers log events that happen to the transactional table into another queue table that can later be "played back". For example, imagine an Accounts table, when transactions are taken against this table, triggers would fire that would then store a history of the event or even the deltas into a separate queue table. The queue table might have schema with the following fields: Id, TableName, RowId, Timestamp, Operation. The data inserted for our Account sample might be: 1, Accounts, 76, 2008-11-02 00:15, Update. More complicated designs might log the actual data that changed. This queue table could then be "played back" to replicate the data from the source system to a target. Data capture offers a challenge in that the structure, contents and use of a transaction log is specific to a database management system. Unlike data access, no standard exists for transaction logs. Most database management systems do not document the internal format of their transaction logs, although some provide programmatic interfaces to their transaction logs (for example: Oracle, DB2, SQL/MP, SQL/MX and SQL Server 2008). Other challenges in using transaction logs for change data capture include: Coordinating the reading of the transaction logs and the archiving of log files (database management software typically archives log files off-line on a regular basis). Translation between physical storage formats that are recorded in the transaction logs and the logical formats typically expected by database users (e.g., some transaction logs save only minimal buffer differences that are not directly useful for change consumers). Dealing with changes to the format of the transaction logs between versions of the database management system. Eliminating uncommitted changes that the database wrote to the transaction log and later rolled back. Dealing with changes to the metadata of tables in the database. CDC solutions based on transaction log files have distinct advantages that include: minimal impact on the database (even more so if one uses log shipping to process the logs on a dedicated host). no need for programmatic changes to the applications that use the database. low latency in acquiring changes. transactional integrity: log scanning can produce a change stream that replays the original transactions in the order they were committed. Such a change stream include changes made to all tables participating in the captured transaction. no need to change the database schema == Confounding factors == As often occurs in complex domains, the final solution to a CDC problem may have to balance many competing concerns. === Unsuitable source systems === Change data capture both increases in complexity and reduces in value if the source system saves metadata changes when the data itself is not modified. For example, some Data models track the user who last looked at but did not change the data in the same structure as the data. This results in noise in the Change Data Capture. === Tracking the capture === Actually tracking the changes depends on the data source. If the data is being persisted in a modern database then Change Data Capture is a simple matter of permissions. Two techniques are in common use: Tracking changes using database triggers Reading the transaction log as, or shortly after, it is written. If the data is not in a modern database, CDC becomes a programming challenge. === Push versus pull === Push: the source process creates a snapshot of changes within its own process and delivers rows downstream. The downstream process uses the snapshot, creates its own subset and delivers them to the next process. Pull: the target that is immediately downstream from the source, prepares a request for data from the source. The downstream target delivers the snapshot to the next target, as in the push model. === Alternatives === Sometimes the slowly changing dimension is used as an alternative method. CDC and SCD are similar in that both methods can detect changes in a data set. The most common forms of SCD are type 1 (overwrite), type 2 (maintain history) or 3 (only previous and current value). SCD 2 can be useful if history is needed in the target system. CDC overwrites in the target system (akin to SCD1), and is ideal when only the changed data needs to arrive at the target, i.e. a delta-driven dataset.

  Read more →
• 

  Depth peeling

  In computer graphics, depth peeling is an exact multipass method of order-independent transparency that extracts transparent fragments into depth layers and composites those layers in depth order. Depth peeling has the advantage of being able to generate correct results even for complex images containing intersecting transparent objects. == Method == Depth peeling works by rendering the image multiple times. Depth peeling uses two Z buffers, one that works conventionally, and one that is not modified, and sets the minimum distance at which a fragment can be drawn without being discarded. For each pass, the previous pass' conventional Z-buffer is used as the minimal Z-buffer, so each pass removes already-captured nearer fragments and draws the next depth layer behind them. The resulting images can then be composited in depth order to form a single image. A major drawback of classical depth peeling is performance: it requires one geometry pass per peeled layer, so scenes with high depth complexity require many passes that each re-rasterize the transparent geometry. Later variants reduce the number of passes by peeling multiple layers or both front and back layers in a pass. Dual depth peeling reduces the geometry-pass count from N to N/2+1 by peeling one layer from the front and one from the back in each pass, while multi-layer depth peeling peels several layers per pass and reported up to an 8x speed-up in RGBA8 settings.

  Read more →
• 

  Unknown key-share attack

  As defined by Blake-Wilson & Menezes (1999), an unknown key-share (UKS) attack on an authenticated key agreement (AK) or authenticated key agreement with key confirmation (AKC) protocol is an attack whereby an entity A {\displaystyle A} ends up believing she shares a key with B {\displaystyle B} , and although this is in fact the case, B {\displaystyle B} mistakenly believes the key is instead shared with an entity E ≠ A {\displaystyle E\neq A} . In other words, in a UKS, an opponent, say Eve, coerces honest parties Alice and Bob into establishing a secret key where at least one of Alice and Bob does not know that the secret key is shared with the other. For example, Eve may coerce Bob into believing he shares the key with Eve, while he actually shares the key with Alice. The “key share” with Alice is thus unknown to Bob.

  Read more →
• 

  Key (cryptography)

  A key in cryptography is a piece of information, usually a string of numbers or letters that are stored in a file, which, when processed through a cryptographic algorithm, can encode or decode cryptographic data. Based on the used method, the key can be different sizes and varieties, but in all cases, the strength of the encryption relies on the security of the key being maintained. A key's security strength is dependent on its algorithm, the size of the key, the generation of the key, and the process of key exchange. == Scope == The key is what is used to encrypt data from plaintext to ciphertext. There are different methods for utilizing keys and encryption. === Symmetric cryptography === Symmetric cryptography refers to the practice of the same key being used for both encryption and decryption. === Asymmetric cryptography === Asymmetric cryptography has separate keys for encrypting and decrypting. These keys are known as the public and private keys, respectively. == Purpose == Since the key protects the confidentiality and integrity of the system, it is important to be kept secret from unauthorized parties. With public key cryptography, only the private key must be kept secret, but with symmetric cryptography, it is important to maintain the confidentiality of the key. Kerckhoff's principle states that the entire security of the cryptographic system relies on the secrecy of the key. == Key sizes == Key size is the number of bits in the key defined by the algorithm. This size defines the upper bound of the cryptographic algorithm's security. The larger the key size, the longer it will take before the key is compromised by a brute force attack. Since perfect secrecy is not feasible for key algorithms, researches are now more focused on computational security. In the past, keys were required to be a minimum of 40 bits in length, however, as technology advanced, these keys were being broken quicker and quicker. As a response, restrictions on symmetric keys were enhanced to be greater in size. Currently, 2048 bit RSA is commonly used, which is sufficient for current systems. However, current RSA key sizes would all be cracked quickly with a powerful quantum computer. "The keys used in public key cryptography have some mathematical structure. For example, public keys used in the RSA system are the product of two prime numbers. Thus public key systems require longer key lengths than symmetric systems for an equivalent level of security. 3072 bits is the suggested key length for systems based on factoring and integer discrete logarithms which aim to have security equivalent to a 128 bit symmetric cipher." == Key generation == To prevent a key from being guessed, keys need to be generated randomly and contain sufficient entropy. The problem of how to safely generate random keys is difficult and has been addressed in many ways by various cryptographic systems. A key can directly be generated by using the output of a Random Bit Generator (RBG), a system that generates a sequence of unpredictable and unbiased bits. A RBG can be used to directly produce either a symmetric key or the random output for an asymmetric key pair generation. Alternatively, a key can also be indirectly created during a key-agreement transaction, from another key or from a password. Some operating systems include tools for "collecting" entropy from the timing of unpredictable operations such as disk drive head movements. For the production of small amounts of keying material, ordinary dice provide a good source of high-quality randomness. == Establishment scheme == The security of a key is dependent on how a key is exchanged between parties. Establishing a secured communication channel is necessary so that outsiders cannot obtain the key. A key establishment scheme (or key exchange) is used to transfer an encryption key among entities. Key agreement and key transport are the two types of a key exchange scheme that are used to be remotely exchanged between entities . In a key agreement scheme, a secret key, which is used between the sender and the receiver to encrypt and decrypt information, is set up to be sent indirectly. All parties exchange information (the shared secret) that permits each party to derive the secret key material. In a key transport scheme, encrypted keying material that is chosen by the sender is transported to the receiver. Either symmetric key or asymmetric key techniques can be used in both schemes. The Diffie–Hellman key exchange and Rivest-Shamir-Adleman (RSA) are the most two widely used key exchange algorithms. In 1976, Whitfield Diffie and Martin Hellman constructed the Diffie–Hellman algorithm, which was the first public key algorithm. The Diffie–Hellman key exchange protocol allows key exchange over an insecure channel by electronically generating a shared key between two parties. On the other hand, RSA is a form of the asymmetric key system which consists of three steps: key generation, encryption, and decryption. Key confirmation delivers an assurance between the key confirmation recipient and provider that the shared keying materials are correct and established. The National Institute of Standards and Technology recommends key confirmation to be integrated into a key establishment scheme to validate its implementations. == Management == Key management concerns the generation, establishment, storage, usage and replacement of cryptographic keys. A key management system (KMS) typically includes three steps of establishing, storing and using keys. The base of security for the generation, storage, distribution, use and destruction of keys depends on successful key management protocols. == Key vs password == A password is a memorized series of characters including letters, digits, and other special symbols that are used to verify identity. It is often produced by a human user or a password management software to protect personal and sensitive information or generate cryptographic keys. Passwords are often created to be memorized by users and may contain non-random information such as dictionary words. On the other hand, a key can help strengthen password protection by implementing a cryptographic algorithm which is difficult to guess or replace the password altogether. A key is generated based on random or pseudo-random data and can often be unreadable to humans. A password is less safe than a cryptographic key due to its low entropy, randomness, and human-readable properties. However, the password may be the only secret data that is accessible to the cryptographic algorithm for information security in some applications such as securing information in storage devices. Thus, a deterministic algorithm called a key derivation function (KDF) uses a password to generate the secure cryptographic keying material to compensate for the password's weakness. Various methods such as adding a salt or key stretching may be used in the generation.

  Read more →
• 

  Data custodian

  In data governance groups, responsibilities for data management are increasingly divided between the business process owners and information technology (IT) departments. Two functional titles commonly used for these roles are data steward and data custodian. Data Stewards are commonly responsible for data content, context, and associated business rules. Data custodians are responsible for the safe custody, transport, storage of the data and implementation of business rules. Simply put, Data Stewards are responsible for what is stored in a data field, while data custodians are responsible for the technical environment and database structure. Common job titles for data custodians are database administrator (DBA), data modeler, ETL developer and data engineer. == Data custodian responsibilities == A data custodian ensures: Access to the data is authorized and controlled Data stewards are identified for each data set Technical processes sustain data integrity Processes exist for data quality issue resolution in partnership with data stewards Technical controls safeguard data Data added to data sets are consistent with the common data model Versions of master data are maintained along with the history of changes Change management practices are applied in maintenance of the database Data content and changes can be audited

  Read more →
• 

  MyRadar

  MyRadar is a free weather forecasting application developed by Andy Green and his Orlando, Florida-based company ACME AtronOmatic (ACME). The app began operations in 2008 and ran on government-provided weather and radar data for its first decade. In 2019, ACME launched personal satellites to improve predictions of ongoing weather. The app received funding to improve its radar and imaging from the Federal Communications Commission (FCC), National Oceanic and Atmospheric Administration (NOAA), and the Office of Naval Research (ONR). ACME created a weather data satellite constellation named "Hyperspectral Orbital Remote Imaging Spectrometer" (HORIS), which utilizes machine learning and artificial intelligence (AI) to create a current weather map. With the introduction of additional features, including the detection of wildfires and illegal fishing, the app has more broadly become an environmental intelligence app since 2022. In 2024, the app partnered with the Total Traffic and Weather Network (TTWN) to provide traffic flow and incident data for users with paying subscriptions via CarPlay and Android Auto. == History == The app's creator, Andy Green, had created internet tech since the 1980s. His first major project was the development of a public access internet service company based in Rhode Island, which he later sold to finance the creation of ACME AtronOmatic ("ACME" for short), based in Orlando, Florida. The first major app created by ACME was called "Flightwise", which provided users with flight tracking information. In summer 2008, Green had the idea to use the animated location tracker already built-in to Flightwise to make a stand-alone weather forecasting app after wondering if a meal he was eating outdoors would get rained out. MyRadar was launched in 2012 out of an office in Orlando. Despite running solely off of free government-provided weather and radar data for the first decade after launch, Green said the app "took off like wildfire" in downloads. In December 2017, the app partnered with "TripIt" to provide users with information about flight delays and gate changes, eliminating the need for a separate app like Flightwise. In 2019, ACME launched their first personal satellite for the app, a small prototype from New Zealand, as part of an effort to provide detailed imagery and improved predictions of ongoing weather unique to the app. More satellites were eventually launched by ACME to create a weather data satellite constellation named "Hyperspectral Orbital Remote Imaging Spectrometer" (HORIS), monitored by ground stations maintained by Kongsberg Satellite Services. HORIS operates MyRadar by taking the environmental data and imagery it collects and pairing it with machine learning and artificial intelligence (AI) to create a real-time weather map. In 2022, HORIS was expanded upon after ACME won approval from the Federal Communications Commission (FCC) to improve their satellite constellation to include 250 satellites or more. The main batch of satellites were PocketQubes, which entered the atmosphere on May 2, 2022, by Rocket Lab Electron launched from New Zealand, with the additional purpose to test and validate the existing satellites in orbit. In October 2022, ACME received a US$150,000 Small Business Innovation Research (SBIR) grant from the National Oceanic and Atmospheric Administration (NOAA) to improve the app's wildfire detection and air quality measurement technology to better detect smoke, aerosols, fire hotspots using satellites and aerial drones. On August 18, 2023, phase two of the NOAA grant was approved, providing an additional US$650,000 to aid in the app's aforementioned goals by launching a pair of CubeSat satellites to provide high-definition infrared imagery. On September 8, 2023, ACME secured another US$1,200,000 in crowd funding to aid accomplishing the goals of the NOAA grant by expanding the app's workforce from 35 to 100 employees by the end of 2024. In January 2024, MyRadar partnered with Total Traffic and Weather Network (TTWN) to provide traffic data overlaid with its pre-existing weather graphics for users in the United States. The partnership allowed for the app to additionally become a tool for navigation. This officially became a feature days later on January 8, 2024, when the app was made compatible with Apple's CarPlay. On February 7, 2024, the Android equivalent Android Auto also gained the ability to display the app on car interfaces. In March 2024, the app launched a "meteorological wedding planning service" in the United States and Canada for prices between US$1,000 and US$5,000, in which users can request a personal meteorologist to provide an in-person meeting about the best dates for a wedding, and on-call local weather updates the day of. Scheduled for February 2025, four more satellites to help with the NOAA-sponsored wildfire detection are to be launched, and the first by ACME to have AI processing in the satellites themself and not computers on the ground, allowing for quicker transfer of information. == Features and general information == The app's primary function is to provide weather forecasting and prediction to users. The app includes toggleable options to track and send alerts to users for rain, wind patterns, earthquakes, tornadoes, tropical cyclones, wildfires, and more. In early 2020, a feature was added to track orbital objects such as the International Space Station. In May 2022, with the imagery improvement of HORIS, the app gained the secondary abilities to better monitor algae blooms, coral reefs, illegal fishing, and wildfires. In January and February 2024, the ability to display traffic flow and incident data in a feature called "RouteCast" was added, and can be displayed in video and 3D options via CarPlay and Android Auto for users with paying subscriptions. The app also provides annual tropical storm and tornado outlooks for their respective seasons, gathered through satellite and aerial drone data, as well as through on the ground storm chasers.

  Read more →
• 

  Personal web page

  Personal web pages are World Wide Web pages created by an individual to contain content of a personal nature rather than content pertaining to a company, organization or institution. Personal web pages are primarily used for informative or entertainment purposes but can also be used for personal career marketing (by containing a list of the individual's skills, experience and a CV), social networking with other people with shared interests, or as a space for personal expression. These terms do not usually refer to just a single "page" or HTML file, but to a website—a collection of webpages and related files under a common URL or Web address. In strictly technical terms, a site's actual home page (index page) often only contains sparse content with some catchy introductory material and serves mostly as a pointer or table of contents to the more content-rich pages inside, such as résumés, family, hobbies, family genealogy, a web log/diary ("blog"), opinions, online journals and diaries or other writing, examples of written work, digital audio sound clips, digital video clips, digital photos, or information about a user's other interests. Many personal pages only include information of interest to friends and family of the author. However, some webpages set up by hobbyists or enthusiasts of certain subject areas can be valuable topical web directories. == History == In the 1990s, most Internet service providers (ISPs) provided a free small personal, user-created webpage along with free Usenet News service. These were all considered part of full Internet service. Also several free web hosting services such as GeoCities provided free web space for personal web pages. These free web hosting services would typically include web-based site management and a few pre-configured scripts to easily integrate an input form or guestbook script into the user's site. Early personal web pages were often called "home pages" and were intended to be set as a default page in a web browser's preferences, usually by their owner. These pages would often contain links, to-do lists, and other information their author found useful. In the days when search engines were in their infancy, these pages (and the links they contained) could be an important resource in navigating the web. Since the early 2000s, the rise of blogging and the development of user friendly web page designing software made it easier for amateur users who did not have computer programming or website designer training to create personal web pages. Some website design websites provided free ready-made blogging scripts, where all the user had to do was input their content into a template. At the same time, a personal web presence became easier with the increased popularity of social networking services, some with blogging platforms such as LiveJournal and Blogger. These websites provided an attractive and easy-to-use content management system for regular users. Most of the early personal websites were Web 1.0 style, in which a static display of text and images or photos was displayed to individuals who came to the page. About the only interaction that was possible on these early websites was signing the virtual "guestbook". With the collapse of the dot-com bubble in the late 1990s, the ISP industry consolidated, and the focus of web hosting services shifted away from the surviving ISP companies to independent Internet hosting services and to ones with other affiliations. For example, many university departments provided personal pages for professors and television broadcasters provided them for their on-air personalities. These free webpages served as a perquisite ("perk") for staff, while at the same time boosting the Web visibility of the parent organization. Web hosting companies either charge a monthly fee, or provide service that is "free" (advertising based) for personal web pages. These are priced or limited according to the total size of all files in bytes on the host's hard drive, or by bandwidth, (traffic), or by some combination of both. For those customers who continue to use their ISP for these services, national ISPs commonly continue to provide both disk space and help including ready-made drop-in scripts. With the rise of Web 2.0-style websites, both professional websites and user-created, amateur websites tended to contain interactive features, such as "clickable" links to online newspaper articles or favourite websites, the option to comment on content displayed on the website, the option to "tag" images, videos or links on the site, the option of "clicking" on an image to enlarge it or find out more information, the option of user participation for website guests to evaluate or review the pages, or even the option to create new user-generated content for others to see. A key difference between Web 1.0 personal webpages and Web 2.0 personal pages was while the former tended to be created by hackers, computer programmers and computer hobbyists, the latter were created by a much wider variety of users, including individuals whose main interests lay in hobbies or topics outside of computers (e.g., indie music fans, political activists, and social entrepreneurs). == Motivations == In a study done by Zinkhan, participants had four main reasons to create personal web pages. First, people use personal web pages as a portrayal of self, in a sense marketing themselves, since creators have the freedom to portray their own identities. Second, personal web pages are a way to interact with people who have similar interests as the creator, possible employers, or colleagues. Third, personal web pages can gain social acceptance with groups that the creator is interested in depending on the information that the creator reveals about themselves. Fourth, personal web pages can give creators a sense of connection to the world since these web pages are public and a way to introduce oneself to other people around the globe. People may maintain personal web pages to serve as a showcase for their skills in professional life, creative skills or self promotion of their business, charity or band. The use of personal web pages to display an individual's professional life has become more common in the 21st century. Mary Madden, an expert researcher on privacy and technology, did a study that found a tenth of American jobs require Personal web pages that advertise an individual online. Personal web pages have become a source of initial impression of possible employees used by employers. It can also be used to express opinions on issues ranging from news and politics to movies. Others may use their personal web page as a communication method. For example, an aspiring artist might give out business cards with their personal web page, and invite people to visit their page and see their artwork, "like" their page or sign their guestbook. A personal web page gives the owner generally more control on presence in search results and how they wish to be viewed online. It also allows more freedom in types and quantity of content than a social network profile offers, and can link various social media profiles with each other. It can be used to correct the record on something, or clear up potential confusion between you and someone with the same name. In the 2010s, some amateur writers, bands and filmmakers release digital versions of their stories, songs and short films online, with the aim of gaining an audience and becoming more well-known. While the huge number of aspiring artists posting their work online makes it unlikely for individuals and groups to become popular via the Internet, there are a small number of YouTube stars who were unknown until their online performances garnered them a huge audience. == Sites of academics == Academic professionals (especially at the college and university level), including professors and researchers, are often given online space for creating and storing personal web documents, including personal web pages, CVs and a list of their books, academic papers and conference presentations, on the websites of their employers. This goes back to the early decade of the World Wide Web and its original purpose of providing a quick and easy way for academics to share research papers and data. Researchers may have a personal website to share more information about themselves, about their academic activities and for sharing (unpublished) results of their research. This has been noted as part of the success of open-access repositories such as arXiv.

  Read more →
• 

  Social computing

  Social computing is an area of computer science that is concerned with the intersection of social behavior and computational systems. It is based on creating or fostering existing social conventions and social contexts through the use of software and technology. Blogs, email, instant messaging, social network services, wikis, social bookmarking and other instances of what is often called social software illustrate ideas from social computing. The rise in social computing is attributed to the prevalence of personal devices and increased overall computing power. This enables a growing number of users to participate in sharing content and interact with another. == Definitions == Humans—and human behavior—are profoundly social. Humans tend to orient to one another and develop abilities to interact with each other and other species. This ranges from expression and gesture through spoken, written, and body language. Humans are influenced by the behavior of those around them and can rely on social context and cues to make decisions. An example of a behavior relying on social contexts is applauding at the end of the play. This is based on the context that the show ended, and other audience members are applauding. Social information provides a basis for inferences, planning, and coordinating activity. == Examples == Common tools include blogs, email, instant messaging, social networking sites, wikis, and social bookmarking platforms. These technologies enable users to generate content, share knowledge, and interact in real time. == Applications == The rise of social computing has highlighted opportunities for businesses. Businesses are interacting on social computing platforms and investing in facilities to support and research social computing.Business models can leverage the massive customer bases that accumulate through social computing channels. Some organizations have started their own blogs and networks (McAfee, 2006, Joe, 2005). Organizations from diverse industry sectors such as Google, Cisco, and Fox, have sought to acquire or invest in successful social computing enterprises. A business blog can serve as a source of information and promotion for the company. This allows the company to share content about the company and their initiatives. Businesses have also interacted with social computing to market themselves and interact with customers. A notable example is Wendy's with their X (formerly Twitter) account. The account was primarily used to promote business promotions and interact with users in a playful or meaningful way. E-commerce web sites have allowed users to leave reviews and feedback on purchases which has improved online shopping experience for sellers and consumers.As another example of social computing’s business applications, many e-commerce Web sites have adopted online product/vendor feedback/reputation systems. Such systems provide an asynchronous platform for the consumer community to share experiences collectively and influence their purchasing behavior. They also provide a vehicle for eliciting feedback information valuable to the vendors and e-commerce site operators.Consumers can use the feedback systems to make a more educated choice on a purchase by comparing reviews between products or vendors. Sellers can track consumer behaviors and trends regarding a product and adjust their supply according to the demand. == Challenges and criticism == Social computing raises several concerns related to privacy, data security, and algorithmic bias. The widespread collection and analysis of user-generated data can lead to ethical dilemmas, especially when users are unaware of how their information is used. Critics also highlight issues of digital labor, surveillance, and the spread of misinformation, which can influence public opinion and social dynamics. === Term appearance === The term appeared in the mid 1990s after technology advancements and development of the web. In 1994, the concept of social computing was first proposed by Schuler. He thought, "Social computing is a computing application, with software as the medium or focus of social relationships." === Premise === The premise of social computing is that it is possible to design digital systems that support useful functionality by making socially produced information available to their users. This information may be provided directly, as when systems show the number of users who have rated a review as helpful or not. Or the information may be provided after being filtered and aggregated, as is done when systems recommend a product based on what else people with similar purchase history have purchased. Alternatively, the information may be provided indirectly, as is the case with Google's page rank algorithms which orders search results based on the number of pages that (recursively) point to them. In all of these cases, information that is produced by a group of people is used to provide or enhance the functioning of a system. Social computing is concerned with systems of this sort and the mechanisms and principles that underlie them. Social computing can be defined as follows: "Social Computing" refers to systems that support the gathering, representation, processing, use, and dissemination of information that is distributed across social collectivities such as teams, communities, organizations, and markets. Moreover, the information is not "anonymous" but is significantly precise because it is linked to people, who are in turn linked to other people. More recent definitions, however, have foregone the restrictions regarding anonymity of information, acknowledging the continued spread and increasing pervasiveness of social computing. As an example, Hemmatazad, N. (2014) defined social computing as "the use of computational devices to facilitate or augment the social interactions of their users, or to evaluate those interactions in an effort to obtain new information." Social computing has to do with supporting "computations" that are carried out by groups of people, an idea that has been popularized in James Surowiecki's book, The Wisdom of Crowds. Examples of social computing in this sense include collaborative filtering, online auctions, reputation systems, computational social choice, tagging, and verification games. The social information processing page focuses on this sense of social computing. == History == === Technology infrastructure === Users were able to interact more with websites after the development of Web 2.0. This was an advancement from Web 1.0. Comode G. and Krishnamurthy B. (2008) note that "content creators were few in Web 1.0 with the vast majority of users simply acting as consumers of content." Web 2.0 provided functionalities that allowed for low-cost web-hosting services and introduced features with browser windows that used basic information structure and expanded it to as many devices as possible using HTTP, or Hypertext Transfer Protocol. Sometimes referred to as "Enterprise 2.0", a term derived from Web 2.0, social software for enterprise generally refers to the use of social computing in corporate intranets and in other medium- and large-scale business environments. It consisted of a class of tools that allowed for networking and social changes to businesses at the time. It was a layering of the business tools on Web 2.0 and brought forth several applications and collaborative software with specific uses. FinanceElectronic negotiation, which first came up in 1969 and was adapted over time to suit financial markets networking needs, represents an important and desirable coordination mechanism for electronic markets. Negotiation between agents (software agents as well as humans) allows cooperative and competitive sharing of information to determine a proper price. Recent research and practice has also shown that electronic negotiation is beneficial for the coordination of complex interactions among organizations. Electronic negotiation has recently emerged as a very dynamic, interdisciplinary research area covering aspects from disciplines such as Economics, Information Systems, Computer Science, Communication Theory, Sociology and Psychology.Social computing has become more widely known because of its relationship to a number of recent trends. These include the growing popularity of social software and Web 3.0, increased academic interest in social network analysis, the rise of open source as a viable method of production, and a growing conviction that all of this can have a profound impact on daily life. A February 13, 2006 paper by market research company Forrester Research suggested that: === Developments === PLATO was one of the earliest examples of social computing in a live production environment with initially hundreds and soon thousands of users. The PLATO computer system was developed by the University of Illinois at Urbana Champaign in 1960s. In the 70s, the system supported social software applications for multi-us

  Read more →