AI Detector Reviews

AI Detector Reviews — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Vulnerabilities Equities Process

The Vulnerabilities Equities Process (VEP) is a process used by the U.S. federal government to determine on a case-by-case basis how it should treat zero-day computer security vulnerabilities: whether to disclose them to the public to help improve general computer security, or to keep them secret for offensive use against the government's adversaries. The VEP was first developed during the period 2008–2009, but only became public in 2016, when the government released a redacted version of the VEP in response to a FOIA request by the Electronic Frontier Foundation. Following public pressure for greater transparency in the wake of the Shadow Brokers affair, the U.S. government made a more public disclosure of the VEP process in November 2017. == Participants == According to the VEP plan published in 2017, the Equities Review Board (ERB) is the primary forum for interagency deliberation and determinations concerning the VEP. The ERB meets monthly, but may also be convened sooner if an immediate need arises. The ERB consists of representatives from the following agencies: Office of Management and Budget Office of the Director of National Intelligence (including the Intelligence Community-Security Coordination Center) United States Department of the Treasury United States Department of State United States Department of Justice (including the Federal Bureau of Investigation and the National Cyber Investigative Joint Task Force) Department of Homeland Security (including the National Cybersecurity and Communications Integration Center and the United States Secret Service) United States Department of Energy United States Department of Defense (to include the National Security Agency, including Information Assurance and Signals Intelligence elements), United States Cyber Command, and DoD Cyber Crime Center) United States Department of Commerce Central Intelligence Agency The National Security Agency serves as the executive secretariat for the VEP. == Process == According to the November 2017 version of the VEP, the process is as follows: === Submission and notification === When an agency finds a vulnerability, it will notify the VEP secretariat as soon as is possible. The notification will include a description of the vulnerability and the vulnerable products or systems, together with the agency's recommendation to either disseminate or restrict the vulnerability information. The secretariat will then notify all participants of the submission within one business day, requesting them to respond if they have an relevant interest. === Equity and discussions === An agency expressing an interest must indicate whether it concurs with the original recommendation to disseminate or restrict within five business days. If it does not, it will hold discussions with the submitting agency and the VEP secretariat within seven business days to attempt to reach consensus. If no consensus is reached, the participants will suggest options for the Equities Review Board. === Determination to disseminate or restrict === Decisions whether to disclose or restrict a vulnerability should be made quickly, in full consultation with all concerned agencies, and in the overall best interest of the competing interests of the missions of the U.S. government. As far as possible, determinations should be based on rational, objective methodologies, taking into account factors such as prevalence, reliance, and severity. If the review board members cannot reach consensus, they will vote on a preliminary determination. If an agency with an equity disputes that decision, they may, by providing notice to the VEP secretariat, elect to contest the preliminary determination. If no agency contests a preliminary determination, it will be treated as a final decision. === Handling and follow-on actions === If vulnerability information is released, this will be done as quickly as possible, preferably within seven business days. Disclosure of vulnerabilities will be conducted according to guidelines agreed on by all members. The submitting agency is presumed to be most knowledgeable about the vulnerability and, as such, will be responsible for disseminating vulnerability information to the vendor. The submitting agency may elect to delegate dissemination responsibility to another agency on its behalf. The releasing agency will promptly provide a copy of the disclosed information to the VEP secretariat for record keeping. Additionally, the releasing agency is expected to follow up so the ERB can determine whether the vendor's action meets government requirements. If the vendor chooses not to address a vulnerability, or is not acting with urgency consistent with the risk of the vulnerability, the releasing agency will notify the secretariat, and the government may take other mitigation steps. == Criticism == The VEP process has been criticized for a number of deficiencies, including restriction by non-disclosure agreements, lack of risk ratings, special treatment for the NSA, and less than whole-hearted commitment to disclosure as the default option. == UK equivalent == British intelligence agencies—GCHQ in particular—follow a similar approach, also known as the Equities Process, to determine whether to disclose or retain security vulnerabilities. The Investigatory Powers Act 2016 was amended in 2022 to bring oversight of the operation of the process within the remit of the Investigatory Powers Commissioner. Details of the process were made public in 2018.
Read more →
Analogical modeling

Analogical modeling (AM) is a formal theory of exemplar based analogical reasoning, proposed by Royal Skousen, professor of Linguistics and English language at Brigham Young University in Provo, Utah. It is applicable to language modeling and other categorization tasks. Analogical modeling is related to connectionism and nearest neighbor approaches, in that it is data-based rather than abstraction-based; but it is distinguished by its ability to cope with imperfect datasets (such as caused by simulated short term memory limits) and to base predictions on all relevant segments of the dataset, whether near or far. In language modeling, AM has successfully predicted empirically valid forms for which no theoretical explanation was known (see the discussion of Finnish morphology in Skousen et al. 2002). == Implementation == === Overview === An exemplar-based model consists of a general-purpose modeling engine and a problem-specific dataset. Within the dataset, each exemplar (a case to be reasoned from, or an informative past experience) appears as a feature vector: a row of values for the set of parameters that define the problem. For example, in a spelling-to-sound task, the feature vector might consist of the letters of a word. Each exemplar in the dataset is stored with an outcome, such as a phoneme or phone to be generated. When the model is presented with a novel situation (in the form of an outcome-less feature vector), the engine algorithmically sorts the dataset to find exemplars that helpfully resemble it, and selects one, whose outcome is the model's prediction. The particulars of the algorithm distinguish one exemplar-based modeling system from another. In AM, we think of the feature values as characterizing a context, and the outcome as a behavior that occurs within that context. Accordingly, the novel situation is known as the given context. Given the known features of the context, the AM engine systematically generates all contexts that include it (all of its supracontexts), and extracts from the dataset the exemplars that belong to each. The engine then discards those supracontexts whose outcomes are inconsistent (this measure of consistency will be discussed further below), leaving an analogical set of supracontexts, and probabilistically selects an exemplar from the analogical set with a bias toward those in large supracontexts. This multilevel search exponentially magnifies the likelihood of a behavior's being predicted as it occurs reliably in settings that specifically resemble the given context. === Analogical modeling in detail === AM performs the same process for each case it is asked to evaluate. The given context, consisting of n variables, is used as a template to generate 2 n {\displaystyle 2^{n}} supracontexts. Each supracontext is a set of exemplars in which one or more variables have the same values that they do in the given context, and the other variables are ignored. In effect, each is a view of the data, created by filtering for some criteria of similarity to the given context, and the total set of supracontexts exhausts all such views. Alternatively, each supracontext is a theory of the task or a proposed rule whose predictive power needs to be evaluated. It is important to note that the supracontexts are not equal peers one with another; they are arranged by their distance from the given context, forming a hierarchy. If a supracontext specifies all of the variables that another one does and more, it is a subcontext of that other one, and it lies closer to the given context. (The hierarchy is not strictly branching; each supracontext can itself be a subcontext of several others, and can have several subcontexts.) This hierarchy becomes significant in the next step of the algorithm. The engine now chooses the analogical set from among the supracontexts. A supracontext may contain exemplars that only exhibit one behavior; it is deterministically homogeneous and is included. It is a view of the data that displays regularity, or a relevant theory that has never yet been disproven. A supracontext may exhibit several behaviors, but contain no exemplars that occur in any more specific supracontext (that is, in any of its subcontexts); in this case it is non-deterministically homogeneous and is included. Here there is no great evidence that a systematic behavior occurs, but also no counterargument. Finally, a supracontext may be heterogeneous, meaning that it exhibits behaviors that are found in a subcontext (closer to the given context), and also behaviors that are not. Where the ambiguous behavior of the nondeterministically homogeneous supracontext was accepted, this is rejected because the intervening subcontext demonstrates that there is a better theory to be found. The heterogeneous supracontext is therefore excluded. This guarantees that we see an increase in meaningfully consistent behavior in the analogical set as we approach the given context. With the analogical set chosen, each appearance of an exemplar (for a given exemplar may appear in several of the analogical supracontexts) is given a pointer to every other appearance of an exemplar within its supracontexts. One of these pointers is then selected at random and followed, and the exemplar to which it points provides the outcome. This gives each supracontext an importance proportional to the square of its size, and makes each exemplar likely to be selected in direct proportion to the sum of the sizes of all analogically consistent supracontexts in which it appears. Then, of course, the probability of predicting a particular outcome is proportional to the summed probabilities of all the exemplars that support it. (Skousen 2002, in Skousen et al. 2002, pp. 11–25, and Skousen 2003, both passim) === Formulas === Given a context with n {\displaystyle n} elements: total number of pairings: n 2 {\displaystyle n^{2}} number of agreements for outcome i: n i 2 {\displaystyle n_{i}^{2}} number of disagreements for outcome i: n i ( n − n i ) {\displaystyle n_{i}(n-n_{i})} total number of agreements: ∑ n i 2 {\displaystyle \sum {n_{i}^{2}}} total number of disagreements: ∑ n i ( n − n i ) = n 2 − ∑ n i 2 {\displaystyle \sum {n_{i}(n-n_{i})}=n^{2}-\sum {n_{i}^{2}}} === Example === This terminology is best understood through an example. In the example used in the second chapter of Skousen (1989), each context consists of three variables with potential values 0-3 Variable 1: 0,1,2,3 Variable 2: 0,1,2,3 Variable 3: 0,1,2,3 The two outcomes for the dataset are e and r, and the exemplars are: 3 1 0 e 0 3 2 r 2 1 0 r 2 1 2 r 3 1 1 r We define a network of pointers like so: The solid lines represent pointers between exemplars with matching outcomes; the dotted lines represent pointers between exemplars with non-matching outcomes. The statistics for this example are as follows: n = 5 {\displaystyle n=5} n r = 4 {\displaystyle n_{r}=4} n e = 1 {\displaystyle n_{e}=1} total number of pairings: n 2 = 25 {\displaystyle n^{2}=25} number of agreements for outcome r: n r 2 = 16 {\displaystyle n_{r}^{2}=16} number of agreements for outcome e: n e 2 = 1 {\displaystyle n_{e}^{2}=1} number of disagreements for outcome r: n r ( n − n r ) = 4 {\displaystyle n_{r}(n-n_{r})=4} number of disagreements for outcome e: n e ( n − n e ) = 4 {\displaystyle n_{e}(n-n_{e})=4} total number of agreements: n r 2 + n e 2 = 17 {\displaystyle n_{r}^{2}+n_{e}^{2}=17} total number of disagreements: n r ( n − n r ) + n e ( n − n e ) = n 2 − ( n r 2 + n e 2 ) = 8 {\displaystyle n_{r}(n-n_{r})+n_{e}(n-n_{e})=n^{2}-(n_{r}^{2}+n_{e}^{2})=8} uncertainty or fraction of disagreement: 8 / 25 = .32 {\displaystyle 8/25=.32} Behavior can only be predicted for a given context; in this example, let us predict the outcome for the context "3 1 2". To do this, we first find all of the contexts containing the given context; these contexts are called supracontexts. We find the supracontexts by systematically eliminating the variables in the given context; with m variables, there will generally be 2 m {\displaystyle 2^{m}} supracontexts. The following table lists each of the sub- and supracontexts; x means "not x", and - means "anything". These contexts are shown in the venn diagram below: The next step is to determine which exemplars belong to which contexts in order to determine which of the contexts are homogeneous. The table below shows each of the subcontexts, their behavior in terms of the given exemplars, and the number of disagreements within the behavior: Analyzing the subcontexts in the table above, we see that there is only 1 subcontext with any disagreements: "3 1 2", which in the dataset consists of "3 1 0 e" and "3 1 1 r". There are 2 disagreements in this subcontext; 1 pointing from each of the exemplars to the other (see the pointer network pictured above). Therefore, only supracontexts containing this subcontext will contain any disagreements. We use a simple rule to identify the homogeneous supraco
Read more →
Spatial Analysis of Principal Components

Spatial Principal Component Analysis (sPCA) is a multivariate statistical technique that complements the traditional Principal Component Analysis (PCA) by incorporating spatial information into the analysis of genetic variation. While traditional PCA can be used to find spatial patterns, it focuses on reducing data dimensionality by identifying uncorrelated principal components that capture maximum variance, thus often lacking power to identify non-trivial spatial genetic patterns. By accounting for spatial autocorrelation, sPCA is able to uncover spatial patterns in the data and find the spatial structure of datasets where observations are either geographically or topologically linked. This statistical power improvement allows the investigation of cryptic spatial patterns of genetic variability otherwise overlooked. sPCA has been applied in various fields, including geography, ecology and genetics. == History == sPCA was introduced in 2008 by Thibaut Jombart, Sébastien Devillard, Anne-Béatrice Dufour, and D. Pontier as a spatially explicit method to investigate the spatial pattern of genetic variation among individuals or populations. In 2017, Valeria Montano and Thibaut Jombart published an alternative non-parametric test to evaluate the significance of global and local spatial genetic patterns with improved statistical power. == Details == sPCA modifies the PCA framework by integrating spatial weights, typically in the form of connectivity matrices or spatial adjacency graphs. It identifies principal components (PCs) that maximize both genentic variance and spatial autocorreation, as measured by Moran's I. These weights represent relationships between observations based on geographic distance or other spatial criteria. The method decomposes variance into two components: Global structures, correspond to positive autocorrelation, that is, reflect broad-scale spatial patterns where similar values cluster over large regions. Local structures, correspond to negative autocorrelation, that is, capture fine-scale spatial variations or localized patterns. The core of sPCA relies on the eigenanalysis of a spatially weighted covariance or correlation matrix. The spatial weight matrix can be constructed using techniques such as Delaunay triangulation, nearest-neighbor graphs, or distance-based criteria. Applications of sPCA should be used only as an explorative tool. == Applications == sPCA has been widely used in many fields, including: Ecology: To find spatial patterns in species distributions and environmental gradients. Genetics: Population structure and gene flow analysis while allowing for spatial autocorrelation considerations. Biogeography: To identify historical dispersal routes, and barriers to gene flow, providing insights into species distribution patterns and evolutionary history. == Software/Source Code == sPCA implementations are available in R in adegenet and ntbox . These tools facilitate the application of sPCA by providing functions for constructing spatial weight matrices, performing eigenanalysis, and obtaining spatial principal components in an easy-to-read form.
Read more →
FERET database

The Facial Recognition Technology (FERET) database is a dataset used for facial recognition system evaluation as part of the Face Recognition Technology (FERET) program. It was first established in 1993 under a collaborative effort between Harry Wechsler at George Mason University and Jonathon Phillips at the Army Research Laboratory in Adelphi, Maryland. The FERET database serves as a standard database of facial images for researchers to use to develop various algorithms and report results. The use of a common database also allowed one to compare the effectiveness of different approaches in methodology and gauge their strengths and weaknesses. The facial images for the database were collected between December 1993 and August 1996, accumulating a total of 14,126 images pertaining to 1,199 individuals along with 365 duplicate sets of images that were taken on a different day. In 2003, the Defense Advanced Research Projects Agency (DARPA) released a high-resolution, 24-bit color version of these images. The dataset tested includes 2,413 still facial images, representing 856 individuals. The FERET database has been used by more than 460 research groups and is managed by the National Institute of Standards and Technology (NIST).
Read more →
Software durability

In software engineering, software durability means the solution ability of serviceability of software and to meet user's needs for a relatively long time. Software durability is important for user's satisfaction. For a software security to be durable, it must allow an organization to adjust the software to business needs that are constantly evolving, often in impulsive ways. Durability of software depends on four characteristics mainly; i.e. software trustworthiness, Human Trust for Serviceability, software dependability and software usability.
Read more →
Gaussian process emulator

In statistics, Gaussian process emulator is one name for a general type of statistical model that has been used in contexts where the problem is to make maximum use of the outputs of a complicated (often non-random) computer-based simulation model. Each run of the simulation model is computationally expensive and each run is based on many different controlling inputs. The variation of the outputs of the simulation model is expected to vary reasonably smoothly with the inputs, but in an unknown way. The overall analysis involves two models: the simulation model, or "simulator", and the statistical model, or "emulator", which notionally emulates the unknown outputs from the simulator. The Gaussian process emulator model treats the problem from the viewpoint of Bayesian statistics. In this approach, even though the output of the simulation model is fixed for any given set of inputs, the actual outputs are unknown unless the computer model is run and hence can be made the subject of a Bayesian analysis. The main element of the Gaussian process emulator model is that it models the outputs as a Gaussian process on a space that is defined by the model inputs. The model includes a description of the correlation or covariance of the outputs, which enables the model to encompass the idea that differences in the output will be small if there are only small differences in the inputs.
Read more →
Farthest-first traversal

In computational geometry, the farthest-first traversal of a compact metric space is a sequence of points in the space, where the first point is selected arbitrarily and each successive point is as far as possible from the set of previously-selected points. The same concept can also be applied to a finite set of geometric points, by restricting the selected points to belong to the set or equivalently by considering the finite metric space generated by these points. For a finite metric space or finite set of geometric points, the resulting sequence forms a permutation of the points, also known as the greedy permutation. Every prefix of a farthest-first traversal provides a set of points that is widely spaced and close to all remaining points. More precisely, no other set of equally many points can be spaced more than twice as widely, and no other set of equally many points can be less than half as far to its farthest remaining point. In part because of these properties, farthest-point traversals have many applications, including the approximation of the traveling salesman problem and the metric k-center problem. They may be constructed in polynomial time, or (for low-dimensional Euclidean spaces) approximated in near-linear time. == Definition and properties == A farthest-first traversal is a sequence of points in a compact metric space, with each point appearing at most once. If the space is finite, each point appears exactly once, and the traversal is a permutation of all of the points in the space. The first point of the sequence may be any point in the space. Each point p after the first must have the maximum possible distance to the set of points earlier than p in the sequence, where the distance from a point to a set is defined as the minimum of the pairwise distances to points in the set. A given space may have many different farthest-first traversals, depending both on the choice of the first point in the sequence (which may be any point in the space) and on ties for the maximum distance among later choices. Farthest-point traversals may be characterized by the following properties. Fix a number k, and consider the prefix formed by the first k points of the farthest-first traversal of any metric space. Let r be the distance between the final point of the prefix and the other points in the prefix. Then this subset has the following two properties: All pairs of the selected points are at distance at least r from each other, and All points of the metric space are at distance at most r from the subset. Conversely any sequence having these properties, for all choices of k, must be a farthest-first traversal. These are the two defining properties of a Delone set, so each prefix of the farthest-first traversal forms a Delone set. == Applications == Rosenkrantz, Stearns & Lewis (1977) used the farthest-first traversal to define the farthest-insertion heuristic for the travelling salesman problem. This heuristic finds approximate solutions to the travelling salesman problem by building up a tour on a subset of points, adding one point at a time to the tour in the ordering given by a farthest-first traversal. To add each point to the tour, one edge of the previous tour is broken and replaced by a pair of edges through the added point, in the cheapest possible way. Although Rosenkrantz et al. prove only a logarithmic approximation ratio for this method, they show that in practice it often works better than other insertion methods with better provable approximation ratios. Later, the same sequence of points was popularized by Gonzalez (1985), who used it as part of greedy approximation algorithms for two problems in clustering, in which the goal is to partition a set of points into k clusters. One of the two problems that Gonzalez solve in this way seeks to minimize the maximum diameter of a cluster, while the other, known as the metric k-center problem, seeks to minimize the maximum radius, the distance from a chosen central point of a cluster to the farthest point from it in the same cluster. For instance, the k-center problem can be used to model the placement of fire stations within a city, in order to ensure that every address within the city can be reached quickly by a fire truck. For both clustering problems, Gonzalez chooses a set of k cluster centers by selecting the first k points of a farthest-first traversal, and then creates clusters by assigning each input point to the nearest cluster center. If r is the distance from the set of k selected centers to the next point at position k + 1 in the traversal, then with this clustering every point is within distance r of its center and every cluster has diameter at most 2r. However, the subset of k centers together with the next point are all at distance at least r from each other, and any k-clustering would put some two of these points into a single cluster, with one of them at distance at least r/2 from its center and with diameter at least r. Thus, Gonzalez's heuristic gives an approximation ratio of 2 for both clustering problems. Gonzalez's heuristic was independently rediscovered for the metric k-center problem by Dyer & Frieze (1985), who applied it more generally to weighted k-center problems. Another paper on the k-center problem from the same time, Hochbaum & Shmoys (1985), achieves the same approximation ratio of 2, but its techniques are different. Nevertheless, Gonzalez's heuristic, and the name "farthest-first traversal", are often incorrectly attributed to Hochbaum and Shmoys. For both the min-max diameter clustering problem and the metric k-center problem, these approximations are optimal: the existence of a polynomial-time heuristic with any constant approximation ratio less than 2 would imply that P = NP. As well as for clustering, the farthest-first traversal can also be used in another type of facility location problem, the max-min facility dispersion problem, in which the goal is to choose the locations of k different facilities so that they are as far apart from each other as possible. More precisely, the goal in this problem is to choose k points from a given metric space or a given set of candidate points, in such a way as to maximize the minimum pairwise distance between the selected points. Again, this can be approximated by choosing the first k points of a farthest-first traversal. If r denotes the distance of the kth point from all previous points, then every point of the metric space or the candidate set is within distance r of the first k − 1 points. By the pigeonhole principle, some two points of the optimal solution (whatever it is) must both be within distance r of the same point among these first k − 1 chosen points, and (by the triangle inequality) within distance 2r of each other. Therefore, the heuristic solution given by the farthest-first traversal is within a factor of two of optimal. Other applications of the farthest-first traversal include color quantization (clustering the colors in an image to a smaller set of representative colors), progressive scanning of images (choosing an order to display the pixels of an image so that prefixes of the ordering produce good lower-resolution versions of the whole image rather than filling in the image from top to bottom), point selection in the probabilistic roadmap method for motion planning, simplification of point clouds, generating masks for halftone images, hierarchical clustering, finding the similarities between polygon meshes of similar surfaces, choosing diverse and high-value observation targets for underwater robot exploration, fault detection in sensor networks, modeling phylogenetic diversity, matching vehicles in a heterogenous fleet to customer delivery requests, uniform distribution of geodetic observatories on the Earth's surface or of other types of sensor network, generation of virtual point lights in the instant radiosity computer graphics rendering method, and geometric range searching data structures. == Algorithms == === Greedy exact algorithm === The farthest-first traversal of a finite point set may be computed by a greedy algorithm that maintains the distance of each point from the previously selected points, performing the following steps: Initialize the sequence of selected points to the empty sequence, and the distances of each point to the selected points to infinity. While not all points have been selected, repeat the following steps: Scan the list of not-yet-selected points to find a point p that has the maximum distance from the selected points. Remove p from the not-yet-selected points and add it to the end of the sequence of selected points. For each remaining not-yet-selected point q, replace the distance stored for q by the minimum of its old value and the distance from p to q. For a set of n points, this algorithm takes O(n2) steps and O(n2) distance computations. === Approximations === A faster approximation algorithm, given by Har-Peled & Mendel (2006), applie
Read more →
Frequent pattern discovery

Frequent pattern discovery (or FP discovery, FP mining, or Frequent itemset mining) is part of knowledge discovery in databases, Massive Online Analysis, and data mining; it describes the task of finding the most frequent and relevant patterns in large datasets. The concept was first introduced for mining transaction databases. Frequent patterns are defined as subsets (itemsets, subsequences, or substructures) that appear in a data set with frequency no less than a user-specified or auto-determined threshold. == Techniques == Techniques for FP mining include: market basket analysis cross-marketing catalog design clustering classification recommendation systems For the most part, FP discovery can be done using association rule learning with particular algorithms Eclat, FP-growth and the Apriori algorithm. Other strategies include: Frequent subtree mining Structure mining Sequential pattern mining and respective specific techniques. Implementations exist for various machine learning systems or modules like MLlib for Apache Spark.
Read more →
Sub-pixel resolution

In digital image processing, sub-pixel resolution can be obtained in images constructed from sources with information exceeding the nominal pixel resolution of said images. == Example == For example, if the image of a ship of length 50 metres (160 ft), viewed side-on, is 500 pixels long, the nominal resolution (pixel size) on the side of the ship facing the camera is 0.1 metres (3.9 in). Now sub-pixel resolution of well resolved features can measure ship movements which are an order of magnitude (10×) smaller. Movement is specifically mentioned here because measuring absolute positions requires an accurate lens model and known reference points within the image to achieve sub-pixel position accuracy. Small movements can however be measured (down to 1 cm) with simple calibration procedures. Specific fit functions often suffer specific bias with respect to image pixel boundaries. Users should therefore take care to avoid these "pixel locking" (or "peak locking") effects. == Determining feasibility == Whether features in a digital image are sharp enough to achieve sub-pixel resolution can be quantified by measuring the point spread function (PSF) of an isolated point in the image. If the image does not contain isolated points, similar methods can be applied to edges in the image. It is also important when attempting sub-pixel resolution to keep image noise to a minimum. This, in the case of a stationary scene, can be measured from a time series of images. Appropriate pixel averaging, through both time (for stationary images) and space (for uniform regions of the image) is often used to prepare the image for sub-pixel resolution measurements.
Read more →
Dimensionality reduction

Dimensionality reduction, or dimension reduction, is the transformation of data from a high-dimensional space into a low-dimensional space so that the low-dimensional representation retains some meaningful properties of the original data, ideally close to its intrinsic dimension. Working in high-dimensional spaces can be undesirable for many reasons; raw data are often sparse as a consequence of the curse of dimensionality, and analyzing the data is usually computationally intractable. Dimensionality reduction is common in fields that deal with large numbers of observations and/or large numbers of variables, such as signal processing, speech recognition, neuroinformatics, and bioinformatics. Methods are commonly divided into linear and nonlinear approaches. Linear approaches can be further divided into feature selection and feature extraction. Dimensionality reduction can be used for noise reduction, data visualization, cluster analysis, or as an intermediate step to facilitate other analyses. == Feature selection == The process of feature selection aims to find a suitable subset of the input variables (features, or attributes) for the task at hand. The three strategies are: the filter strategy (e.g., information gain), the wrapper strategy (e.g., accuracy-guided search), and the embedded strategy (features are added or removed while building the model based on prediction errors). Data analysis such as regression or classification can be done in the reduced space more accurately than in the original space. == Feature projection == Feature projection (also called feature extraction) transforms the data from the high-dimensional space to a space of fewer dimensions. The data transformation may be linear, as in principal component analysis (PCA), but many nonlinear dimensionality reduction techniques also exist. For multidimensional data, tensor representation can be used in dimensionality reduction through multilinear subspace learning. === Principal component analysis (PCA) === The main linear technique for dimensionality reduction, principal component analysis, performs a linear mapping of the data to a lower-dimensional space in such a way that the variance of the data in the low-dimensional representation is maximized. In practice, the covariance (and sometimes the correlation) matrix of the data is constructed and the eigenvectors on this matrix are computed. The eigenvectors that correspond to the largest eigenvalues (the principal components) can now be used to reconstruct a large fraction of the variance of the original data. Moreover, the first few eigenvectors can often be interpreted in terms of the large-scale physical behavior of the system, because they often contribute the vast majority of the system's energy, especially in low-dimensional systems. Still, this must be proved on a case-by-case basis as not all systems exhibit this behavior. The original space (with dimension of the number of points) has been reduced (with data loss, but hopefully retaining the most important variance) to the space spanned by a few eigenvectors. === Non-negative matrix factorization (NMF) === NMF decomposes a non-negative matrix to the product of two non-negative ones, which has been a promising tool in fields where only non-negative signals exist, such as astronomy. NMF is well known since the multiplicative update rule by Lee & Seung, which has been continuously developed: the inclusion of uncertainties, the consideration of missing data and parallel computation, sequential construction which leads to the stability and linearity of NMF, as well as other updates including handling missing data in digital image processing. With a stable component basis during construction, and a linear modeling process, sequential NMF is able to preserve the flux in direct imaging of circumstellar structures in astronomy, as one of the methods of detecting exoplanets, especially for the direct imaging of circumstellar discs. In comparison with PCA, NMF does not remove the mean of the matrices, which leads to physical non-negative fluxes; therefore NMF is able to preserve more information than PCA as demonstrated by Ren et al. === Kernel PCA === Principal component analysis can be employed in a nonlinear way by means of the kernel trick. The resulting technique is capable of constructing nonlinear mappings that maximize the variance in the data. The resulting technique is called kernel PCA. === Graph-based kernel PCA === Other prominent nonlinear techniques include manifold learning techniques such as Isomap, locally linear embedding (LLE), Hessian LLE, Laplacian eigenmaps, and methods based on tangent space analysis. These techniques assume that the high-dimensional input data lies near a low-dimensional manifold embedded in the ambient space, and construct a low-dimensional representation using a cost function that retains local properties of the data; they can be viewed as defining a graph-based kernel for Kernel PCA. More recently, techniques have been proposed that, instead of defining a fixed kernel, try to learn the kernel using semidefinite programming. The most prominent example of such a technique is maximum variance unfolding (MVU). The central idea of MVU is to exactly preserve all pairwise distances between nearest neighbors (in the inner product space) while maximizing the distances between points that are not nearest neighbors. An alternative approach to neighborhood preservation is through the minimization of a cost function that measures differences between distances in the input and output spaces. Important examples of such techniques include: classical multidimensional scaling, which is identical to PCA; Isomap, which uses geodesic distances in the data space; diffusion maps, which use diffusion distances in the data space; t-distributed stochastic neighbor embedding (t-SNE), which minimizes the divergence between distributions over pairs of points; and curvilinear component analysis. A different approach to nonlinear dimensionality reduction is through the use of autoencoders, a special kind of feedforward neural networks with a bottleneck hidden layer. The training of deep encoders is typically performed using a greedy layer-wise pre-training (e.g., using a stack of restricted Boltzmann machines) that is followed by a finetuning stage based on backpropagation. === Linear discriminant analysis (LDA) === Linear discriminant analysis (LDA) is a generalization of Fisher's linear discriminant, a method used in statistics, pattern recognition, and machine learning to find a linear combination of features that characterizes or separates two or more classes of objects or events. === Generalized discriminant analysis (GDA) === GDA deals with nonlinear discriminant analysis using kernel function operator. The underlying theory is close to the support-vector machines (SVM) insofar as the GDA method provides a mapping of the input vectors into high-dimensional feature space. Similar to LDA, the objective of GDA is to find a projection for the features into a lower dimensional space by maximizing the ratio of between-class scatter to within-class scatter. === Autoencoder === Autoencoders can be used to learn nonlinear dimension reduction functions and codings together with an inverse function from the coding to the original representation. === t-SNE === T-distributed Stochastic Neighbor Embedding (t-SNE) is a nonlinear dimensionality reduction technique useful for the visualization of high-dimensional datasets. It is not recommended for use in analysis such as clustering or outlier detection since it does not necessarily preserve densities or distances well. === UMAP === Uniform manifold approximation and projection (UMAP) is a nonlinear dimensionality reduction technique. Visually, it is similar to t-SNE, but it assumes that the data is uniformly distributed on a locally connected Riemannian manifold and that the Riemannian metric is locally constant or approximately locally constant. == Dimension reduction == For high-dimensional datasets, dimension reduction is usually performed prior to applying a k-nearest neighbors (k-NN) algorithm in order to mitigate the curse of dimensionality. Feature extraction and dimension reduction can be combined in one step, using principal component analysis (PCA), linear discriminant analysis (LDA), canonical correlation analysis (CCA), or non-negative matrix factorization (NMF) techniques to pre-process the data, followed by clustering via k-NN on feature vectors in a reduced-dimension space. In machine learning, this process is also called low-dimensional embedding. For high-dimensional datasets (e.g., when performing similarity search on live video streams, DNA data, or high-dimensional time series), running a fast approximate k-NN search using locality-sensitive hashing, random projection, "sketches", or other high-dimensional similarity search techniques from the VLDB conference toolbox may be the only fe
Read more →
Ground truth

Ground truth is information that is known to be real or true, provided by direct observation and measurement (i.e. empirical evidence) as opposed to information provided by inference. The term ground truth appeared in remote sensing literature as early as 1972, when NASA described it as essential "data about ... materials on the earth's surface" used to calibrate measurements. It was later adopted by the statistical modeling and machine learning communities. == Etymology == The Oxford English Dictionary (s.v. ground truth) records the use of the word Groundtruth in the sense of 'fundamental truth' from Henry Ellison's poem "The Siberian Exile's Tale", published in 1833. == Usage == The term "ground truth" can be used as a noun, adjective, and verb. Noun: "ground truth" (no hyphen). Example: "The ground truth is essential for training accurate models." Adjective: "ground-truth" (hyphenated compound adjective). Example: "We need to use ground-truth data to validate the model." Verb: "to ground-truth" or "to groundtruth" (compound verb,). Example: "We need to ground-truth the results to ensure their accuracy." == Statistics and machine learning == In statistics and machine learning, ground truth is the ideal expected result, used in statistical models to prove or disprove research hypotheses. "Ground truthing" is the process of gathering the good data for this test. Ground truth is typically included in labeled data. In machine learning, "ground truth" is not necessarily objectively correct or true. For example, in training AI models or relevance rankers, it may be a set of judgments made by people or inferred from user behavior, which may depend on context. For example, in Bayesian spam filtering, a supervised learning system is typically trained by examples labeled as spam and non-spam. Although these labels may be subjective or inaccurate, they are considered ground truth. True ground truth in machine learning is objective data. For example, suppose we are testing a stereo vision system to see how well it can estimate 3D positions. A calibrated laser rangefinder may provide accurate distances as ground truth. == Remote sensing == In remote sensing, "ground truth" refers to information collected at the imaged location. Ground truth allows image data to be related to real features and materials on the ground. The collection of ground truth data enables calibration of remote-sensing data, and aids in the interpretation and analysis of what is being sensed. Examples include cartography, meteorology, analysis of aerial photographs, satellite imagery and other techniques in which data are gathered at a distance. More specifically, ground truth may refer to a process in which "pixels" on a satellite image are compared to what is imaged (at the time of capture) in order to verify the contents of the "pixels" in the image (noting that the concept of "pixel" is imaging-system-dependent). In the case of a classified image, supervised classification can help to determine the accuracy of the classification by the remote sensing system which can minimize error in the classification. Ground truth is usually done on site, correlating what is known with surface observations and measurements of various properties of the features of the ground resolution cells under study in the remotely sensed digital image. The process also involves taking geographic coordinates of the ground resolution cell with GPS technology and comparing those with the coordinates of the "pixel" being studied provided by the remote sensing software to understand and analyze the location errors and how it may affect a particular study. Ground truth is important in the initial supervised classification of an image. When the identity and location of land cover types are known through a combination of field work, maps, and personal experience these areas are known as training sites. The spectral characteristics of these areas are used to train the remote sensing software using decision rules for classifying the rest of the image. These decision rules such as Maximum Likelihood Classification, Parallelopiped Classification, and Minimum Distance Classification offer different techniques to classify an image. Additional ground truth sites allow the remote sensor to establish an error matrix that validates the accuracy of the classification method used. Different classification methods may have different percentages of error for a given classification project. It is important that the remote sensor chooses a classification method that works best with the number of classifications used while providing the least amount of error. Ground truth also helps with atmospheric correction. Since images from satellites have to pass through the atmosphere, they can get distorted because of absorption in the atmosphere. So ground truth can help fully identify objects in satellite photos. === Errors of commission === An example of an error of commission is when a pixel reports the presence of a feature (such a tree) that, in reality, is absent (no tree is actually present). Ground truthing ensures that the error matrices have a higher accuracy percentage than would be the case if no pixels were ground-truthed. This value is the complement of the user's accuracy, i.e. Commission Error = 1 - user's accuracy. === Errors of omission === An example of an error of omission is when pixels of a certain type, for example, maple trees, are not classified as maple trees. The process of ground-truthing helps to ensure that the pixel is classified correctly and the error matrices are more accurate. This value is the complement of the producer's accuracy, i.e. Omission Error = 1 - producer's accuracy == Geographical information systems == In GIS the spatial data is modeled as field (like in remote sensing raster images) or as object (like in vectorial map representation). They are modeled from the real world (also named geographical reality), typically by a cartographic process (illustrated). Geographic information systems such as GIS, GPS, and GNSS, have become so widespread that the term "ground truth" has taken on special meaning in that context. If the location coordinates returned by a location method such as GPS are an estimate of a location, then the "ground truth" is the actual location on Earth. A smart phone might return a set of estimated location coordinates such as 43.87870, −103.45901. The ground truth being estimated by those coordinates is the tip of George Washington's nose on Mount Rushmore. The accuracy of the estimate is the maximum distance between the location coordinates and the ground truth. We could say in this case that the estimate accuracy is 10 meters, meaning that the point on Earth represented by the location coordinates is thought to be within 10 meters of George's nose—the ground truth. In slang, the coordinates indicate where we think George Washington's nose is located, and the ground truth is where it really is. In practice a smart phone or hand-held GPS unit is routinely able to estimate the ground truth within 6–10 meters. Specialized instruments can reduce GPS measurement error to under a centimeter. == Military usage == US military slang uses "ground truth" to refer to the facts comprising a tactical situation—as opposed to intelligence reports, mission plans, and other descriptions reflecting the conative or policy-based projections of the industrial·military complex. The term appears in the title of the Iraq War documentary film The Ground Truth (2006), and also in military publications, for example Stars and Stripes saying: "Stripes decided to figure out what the ground truth was in Iraq."
Read more →
Concept class

In computational learning theory in mathematics, a concept over a domain X is a total Boolean function over X. A concept class is a class of concepts. Concept classes are a subject of computational learning theory. Concept class terminology frequently appears in model theory associated with probably approximately correct (PAC) learning. In this setting, if one takes a set Y as a set of (classifier output) labels, and X is a set of examples, the map c : X → Y {\displaystyle c:X\to Y} , i.e. from examples to classifier labels (where Y = { 0 , 1 } {\displaystyle Y=\{0,1\}} and where c is a subset of X), c is then said to be a concept. A concept class C {\displaystyle C} is then a collection of such concepts. Given a class of concepts C, a subclass D is reachable if there exists a sample s such that D contains exactly those concepts in C that are extensions to s. Not every subclass is reachable. == Background == A sample s {\displaystyle s} is a partial function from X {\displaystyle X} to { 0 , 1 } {\displaystyle \{0,1\}} . Identifying a concept with its characteristic function mapping X {\displaystyle X} to { 0 , 1 } {\displaystyle \{0,1\}} , it is a special case of a sample. Two samples are consistent if they agree on the intersection of their domains. A sample s ′ {\displaystyle s'} extends another sample s {\displaystyle s} if the two are consistent and the domain of s {\displaystyle s} is contained in the domain of s ′ {\displaystyle s'} . == Examples == Suppose that C = S + ( X ) {\displaystyle C=S^{+}(X)} . Then: the subclass { { x } } {\displaystyle \{\{x\}\}} is reachable with the sample s = { ( x , 1 ) } {\displaystyle s=\{(x,1)\}} ; the subclass S + ( Y ) {\displaystyle S^{+}(Y)} for Y ⊆ X {\displaystyle Y\subseteq X} are reachable with a sample that maps the elements of X − Y {\displaystyle X-Y} to zero; the subclass S ( X ) {\displaystyle S(X)} , which consists of the singleton sets, is not reachable. == Applications == Let C {\displaystyle C} be some concept class. For any concept c ∈ C {\displaystyle c\in C} , we call this concept 1 / d {\displaystyle 1/d} -good for a positive integer d {\displaystyle d} if, for all x ∈ X {\displaystyle x\in X} , at least 1 / d {\displaystyle 1/d} of the concepts in C {\displaystyle C} agree with c {\displaystyle c} on the classification of x {\displaystyle x} . The fingerprint dimension F D ( C ) {\displaystyle FD(C)} of the entire concept class C {\displaystyle C} is the least positive integer d {\displaystyle d} such that every reachable subclass C ′ ⊆ C {\displaystyle C'\subseteq C} contains a concept that is 1 / d {\displaystyle 1/d} -good for it. This quantity can be used to bound the minimum number of equivalence queries needed to learn a class of concepts according to the following inequality: F D ( C ) − 1 ≤ # E Q ( C ) ≤ ⌈ F D ( C ) ln ⁡ ( | C | ) ⌉ {\textstyle FD(C)-1\leq \#EQ(C)\leq \lceil FD(C)\ln(|C|)\rceil } .
Read more →
SAP BTP

SAP Business Technology Platform (SAP BTP) is a platform as a service developed by SAP SE that offers a suite of services including database and data management, AI, analytics, application development, automation and integration all running on one unified platform. == Overview == SAP BTP is made up of four components: Application development and automation: to create applications or extend existing applications. Data and analytics: to access and analyze data across SAP and third-party systems using multi-cloud architecture. Integration: to integrate and connect applications and data. Artificial Intelligence (AI): to access large language models (LLMs) to develop AI. == History == SAP BTP was introduced as part of the SAP strategy to unify its portfolio and cloud offerings under a single platform. The platform was evolved from earlier initiatives such as SAP Cloud Platform and now serves as the central hub for cloud, data, analytics, integration and AI technologies. Initially unveiled as "SAP NetWeaver Cloud" belonging to the SAP HANA Cloud portfolio on October 16, 2012 the cloud platform was reintroduced with the new name "SAP HANA Cloud Platform" on May 13, 2013 as the foundation for SAP cloud products, including the SAP BusinessObjects Cloud. Adoption of the SAP HANA Cloud Platform in 2015 stood at over 4000 customers and 500 partners. In 2016, SAP and Apple Inc. partnered to develop mobile applications on iOS using cloud-based software development kits (SDKs) for the SAP Cloud Platform. On February 27, 2017, SAP HANA Cloud Platform was renamed "SAP Cloud Platform" at the Mobile World Congress. On January 18, 2021, the name "SAP Cloud Platform" was retired from the SAP product portfolio to support SAP BTP. As of October 2024, SAP states that SAP BTP is used by more than 27,000 customers and more than 2,800 partners. Recently, SAP Business One has worked on improving the functionalities of BTP to cater for the demands of digital transformation. The platform offers comprehensive services in AI, application development, automation, integration, data management, and analytics.
Read more →
Iris flower data set

The Iris flower data set or Fisher's Iris data set is a multivariate data set used and made famous by the British statistician and biologist Ronald Fisher in his 1936 paper The use of multiple measurements in taxonomic problems as an example of linear discriminant analysis. It is sometimes called Anderson's Iris data set because Edgar Anderson collected the data to quantify the morphologic variation of Iris flowers of three related species. Two of the three species were collected in the Gaspé Peninsula "all from the same pasture, and picked on the same day and measured at the same time by the same person with the same apparatus". The data set consists of 50 samples from each of three species of Iris (Iris setosa, Iris virginica and Iris versicolor). Four features were measured from each sample: the length and the width of the sepals and petals, in centimeters. Based on the combination of these four features, Fisher developed a linear discriminant model to distinguish each species. Fisher's paper was published in the Annals of Eugenics (today the Annals of Human Genetics). == Use of the data set == Originally used as an example data set on which Fisher's linear discriminant analysis was applied, it became a typical test case for many statistical classification techniques in machine learning such as support vector machines. The use of this data set in cluster analysis however is not common, since the data set only contains two clusters with rather obvious separation. One of the clusters contains Iris setosa, while the other cluster contains both Iris virginica and Iris versicolor and is not separable without the species information Fisher used. This makes the data set a good example to explain the difference between supervised and unsupervised techniques in data mining: Fisher's linear discriminant model can only be obtained when the object species are known: class labels and clusters are not necessarily the same. Nevertheless, all three species of Iris are separable in the projection on the nonlinear and branching principal component. The data set is approximated by the closest tree with some penalty for the excessive number of nodes, bending and stretching. Then the so-called "metro map" is constructed. The data points are projected into the closest node. For each node the pie diagram of the projected points is prepared. The area of the pie is proportional to the number of the projected points. It is clear from the diagram (left) that the absolute majority of the samples of the different Iris species belong to the different nodes. Only a small fraction of Iris-virginica is mixed with Iris-versicolor (the mixed blue-green nodes in the diagram). Therefore, the three species of Iris (Iris setosa, Iris virginica and Iris versicolor) are separable by the unsupervising procedures of nonlinear principal component analysis. To discriminate them, it is sufficient just to select the corresponding nodes on the principal tree. == Data set == The data set contains a set of 150 records under five attributes: sepal length, sepal width, petal length, petal width and species. The iris data set is widely used as a beginner's data set for machine learning purposes. The data set is included in R base and Python in the machine learning library scikit-learn, so that users can access it without having to find a source for it. Several versions of the data set have been published. === R code illustrating usage === The example R code shown below reproduce the scatterplot displayed at the top of this article: === Python code illustrating usage === This code gives:
Read more →
Yooreeka

Yooreeka is a library for data mining, machine learning, soft computing, and mathematical analysis. The project started with the code of the book "Algorithms of the Intelligent Web". Although the term "Web" prevailed in the title, in essence, the algorithms are valuable in any software application. It covers all major algorithms and provides many examples. Yooreeka 2.x is licensed under the Apache License rather than the somewhat more restrictive LGPL (which was the license of v1.x). The library is written 100% in the Java language. == Algorithms == The following algorithms are covered: Clustering Hierarchical—Agglomerative (e.g. MST single link; ROCK) and Divisive Partitional (e.g. k-means) Classification Bayesian Decision trees Neural Networks Rule based (via Drools) Recommendations Collaborative filtering Content based Search PageRank DocRank Personalization
Read more →