AI Detector In Photos

AI Detector In Photos — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Comparison of operating systems

    Comparison of operating systems

    These tables provide a comparison of operating systems, of computer devices, as listing general and technical information for a number of widely used and currently available PC or handheld (including smartphone and tablet computer) operating systems. The article "Usage share of operating systems" provides a broader, and more general, comparison of operating systems that includes servers, mainframes and supercomputers. Because of the large number and variety of available Linux distributions, they are all grouped under a single entry; see comparison of Linux distributions for a detailed comparison. There is also a variety of BSD and DOS operating systems, covered in comparison of BSD operating systems and comparison of DOS operating systems. == Nomenclature == The nomenclature for operating systems varies among providers and sometimes within providers. For purposes of this article the terms used are; kernel In some operating systems, the OS is split into a low level region called the kernel and higher level code that relies on the kernel. Typically the kernel implements processes but its code does not run as part of a process. hybrid kernel monolithic kernel Nucleus In some operating systems there is OS code permanently present in a contiguous region of memory addressable by unprivileged code; in IBM systems this is typically referred to as the nucleus. The nucleus typically contains both code that requires special privileges and code that can run in an unprivileged state. Typically some code in the nucleus runs in the context of a dispatching unit, e.g., address space, process, task, thread, while other code runs independent of any dispatching unit. In contemporary operating systems unprivileged applications cannot alter the nucleus. License and pricing policies vary widely among different systems. Among others, the tables below use the following terms: BSD BSD licenses are a family of permissive free software licenses, imposing minimal restrictions on the use and distribution of covered software. bundled The fee is included in the price of the hardware == General information == == Technical information == == Security == == Commands == For POSIX compliant (or partly compliant) systems like FreeBSD, Linux, macOS or Solaris, the basic commands are the same because they are standardized. NOTE: Linux systems may vary by distribution which specific program, or even 'command' is called, via the POSIX alias function. For example, if you wanted to use the DOS dir to give you a directory listing with one detailed file listing per line you could use alias dir='ls -lahF' (e.g. in a session configuration file).

    Read more →
  • Linux color management

    Linux color management

    Linux color management has the same goal as the color management systems (CMS) for other operating systems, which is to achieve the best possible color reproduction throughout an imaging workflow from its source (camera, video, scanner, etc.), through imaging software (Digikam, darktable, RawTherapee, GIMP, Krita, Scribus, etc.), and finally onto an output medium (monitor, video projector, printer, etc.). In particular, color management attempts to enable color consistency across media and throughout a color-managed workflow. Linux color management relies on the use of accurate ICC (International Color Consortium) and DCP (DNG Color Profile) profiles describing the behavior of input and output devices, and color-managed applications that are aware of these profiles. These applications perform gamut conversions between device profiles and color spaces. Gamut conversions, based on accurate device profiles, are the essence of color management. Historically, color management was not an initial design consideration of the X Window System on which much of Linux graphics support rests, and thus color-managed workflows have been somewhat more challenging to implement on Linux than on other OS's such as Microsoft Windows or macOS. This situation is now being progressively remedied, and color management under Linux, while functional, has not yet acquired mature status. Although it is now possible to obtain a consistent color-managed workflow under Linux, certain problems still remain: The absence of a central user control panel for color settings. Some hardware devices for color calibration lack Linux drivers, firmware or accessory data. Since ICC color profiles are written to an open specification, they are compatible across operating systems. Hence, a profile produced on one OS should work on any other OS given the availability of the necessary software to read it and perform the gamut conversions. This can be used as a workaround for the lack of support for certain spectrophotometers or colorimeters under Linux: one can simply produce a profile on a different OS and then use it in a Linux workflow. Additionally, certain hardware, such as most printers and certain monitors, can be calibrated under another OS and then used in a fully color-managed workflow on Linux. The popular Ubuntu Linux distribution added initial color management in the 11.10 release (the "Oneiric Ocelot" release). == Requirements for a color-managed workflow == Accurate device profiles obtained with source or output characterization software. Correctly loaded video card lookup tables (LUTs) (or monitor profiles that do not require LUT adjustments). Color-managed applications that are configured to use a correct monitor profile and input/output profiles, with support for control over the rendering intent and black point compensation. Calibration and profiling requires: for input devices (scanner, camera, etc.) a color target which the profiling software will compare to the manufacturer-provided color values of the target. or for output devices (monitor, printer, etc.) a reading with a specific device (spectrophotometer, colorimeter or spectrocolorimeter) of the color patch values and comparing the measured values against the values originally sent for output. === Monitor calibration and profiling === One of the critical elements in any color-managed workflow is the monitor, because, at one step or another, handling and making color adaptation through imaging software is required for most images, thus the ability of the monitor to present accurate colors is crucial. Monitor color management consists of calibration and profiling. The first step, calibration, is done by adjusting the monitor controls and the output of the graphics card (via calibration curves) to match user-definable characteristics, such as brightness, white point and gamma. The calibration settings are stored in a .cal file. The second step, profiling (characterization), involves measuring the calibrated display's response and recording it in a color profile. The profile is stored in an .icc file ("ICC file"). For convenience, the calibration settings are usually stored together with the profile in the ICC file. Note that .icm files are identical to .icc files - the difference is only in the name. Seeing correct colors requires using a monitor profile-aware application, together with the same calibration used when profiling the monitor. Calibration alone does not yield accurate colors. If a monitor was calibrated before it was profiled, the profile will only yield correct colors when used on the monitor with the same calibration (the same monitor control adjustments and the same calibration curves loaded into the video card's lookup table). macOS has built-in support for loading calibration curves and installing a system-wide color profile. Windows 7 onward allows loading calibration curves, though this functionality must be enabled manually. Linux and older versions of Windows require using a standalone LUT loader. === Device profiles === ICC profiles are cross-platform and can thus be created on other operating systems and used under Linux. Monitor profiles, however, require some additional attention. Since a monitor profile depends both on the monitor itself and on the video card, a monitor profile should only be used with the same monitor and video card with which it was created. The monitor settings should not be adjusted after creating the profile. In addition, since most calibration software use LUT adjustments during calibration, the corresponding LUTs must be loaded every time the display server (X11, Wayland) is started (e.g. with every graphical login). In the unlikely case of a colorimeter being unsupported by Linux, a profile created under Windows or macOS can be used under Linux. === Display-channel lookup tables === There are two approaches to loading display channel LUTs: Create a profile that does not modify video card LUTs and thus does not require LUTs be loaded later on. Ideally, this approach would rely on DDC-capable monitors—the internal monitor settings of which are set via calibration software. Unfortunately, monitors capable of making these adjustments through DDC are not common and are generally expensive. There is only one calibration software on Linux that can interact with a DDC monitor. For mainstream monitors, a couple of options exist: BasICColor software, which works with most colorimeters on the market, allows one to adjust display output via the monitor interface, and then to choose a "Profile, do not calibrate" option. By doing this, one can create a profile that does not require video card LUT adjustments. For EyeOne devices, EyeOne Match allows the user to calibrate to "Native" gamma and white point targets, which results in the LUT adjustment curves displayed after the calibration as a simple, linear 1:1 mapping (a straight line from corner to corner). Both BasICColor and EyeOne Match do not presently run under Linux but they are capable of creating a profile that does not require LUT adjustments. Use an LUT loader to actually load the LUT adjustments contained within the profile prepared during calibration. According to the documentation, these loaders do not modify the video card LUT by itself, but achieve the same type of adjustment by modifying the X server gamma ramp. Loaders are available for Linux distributions that use X.org or XFree86—the two most popular X servers on Linux. Other X servers are not guaranteed to work with the currently available loaders. There are two LUT loaders available for Linux: Xcalib is one such loader, and although it is a command-line utility, it is quite easy to use. dispwin is a part of Argyll CMS. If, for any reason, the LUT cannot be loaded, it is still recommended to go through the initial stages of calibration where a user is asked by calibration software to make some manual adjustments to the monitor, as this will often improve display linearity and also provide information on its color temperature. This is especially recommended for CRT monitors. === Color-managed applications === In ICC-aware applications, it is important to make sure the correct profiles are assigned to devices, mainly to the monitor and the printer. Some Linux applications can auto-detect the monitor profile, while others requires that it is specified manually. Although there is no designated place to store device profiles on Linux, /usr/share/color/icc/ has become the de facto standard. Most applications running under WINE have not been fully tested for color accuracy. While 8-bpp programs can have some color resolution difficulties due to depth conversion errors, colors in higher-depth applications should be accurate, as long as those programs perform their gamut conversions based on the same monitor profile as that used for loading the LUT, granted that the corresponding LUT adjustments are loaded. == List of color-managed applications == darktabl

    Read more →
  • Security type system

    Security type system

    In computer science, a type system can be described as a syntactic framework which contains a set of rules that are used to assign a type property (int, boolean, char etc.) to various components of a computer program, such as variables or functions. A security type system works in a similar way, only with a main focus on the security of the computer program, through information flow control. Thus, the various components of the program are assigned security types, or labels. The aim of a such system is to ultimately be able to verify that a given program conforms to the type system rules and satisfies non-interference. Security type systems is one of many security techniques used in the field of language-based security, and is tightly connected to information flow and information flow policies. In simple terms, a security type system can be used to detect if there exists any kind of violation of confidentiality or integrity in a program, i.e. the programmer wants to detect if the program is in line with the information flow policy or not. == A simple information flow policy == Suppose there are two users, A and B. In a program, the following security classes (SC) are introduced: SC = {∅, {A}, {B}, {A,B}}, where ∅ is the empty set. The information flow policy should define the direction that information is allowed to flow, which is dependent on whether the policy allows read or write operations. This example considers read operations (confidentiality). The following flows are allowed: → = {({A}, {A}), ({B}, {B}), ({A,B}, {A,B}), ({A,B}, {A}), ({A,B}, {B}), ({A}, ∅), ({B}, ∅), ({A,B}, ∅)} This can also be described as a superset (⊇). In words: information is allowed to flow towards stricter levels of confidentiality. The combination operator (⊕) can express how security classes can perform read operations with respect to other security classes. For example: {A} ⊕ {A,B} = {A} — the only security class that can read from both {A} and {A,B} is {A}. {A} ⊕ {B} = ∅ — neither {A} nor {B} are allowed to read from both {A} and {B}. This can also be described as an intersection (∩) between security classes. An information flow policy can be illustrated as a Hasse diagram. The policy should also be a lattice, that is, it has a greatest lower-bound and least upper-bound (there always exists a combination between security classes). In the case of integrity, information will flow in the opposite direction, thus the policy will be inverted. == Information flow policy in security type systems == Once the policy is in place, the software developer can apply the security classes to the program components. Use of a security type system is usually combined with a compiler that can perform the verification of the information flow according to the type system rules. For the sake of simplicity, a very simple computer program, together with the information flow policy as described in the previous section, can be used as a demonstration. The simple program is given in the following pseudocode: if y{A} = 1 then x{A,B} := 0 else x{A,B} := 1 Here, an equality check is made on a variable y that is assigned the security class {A}. A variable x with a lower security class ({A,B}) is influenced by this check. This means that information is leaking from class {A} to class {A,B}, which is a violation of the confidentiality policy. This leak should be detected by the security type system. === Example === Designing a security type system requires a function (also known as a security environment) that creates a mapping from variables to security types, or classes. This function can be called Γ, such that Γ(x) = τ, where x is a variable and τ is the security class, or type. Security classes are assigned (also called "judgement") to program components, using the following notation: Types are assigned to read operations by: Γ ⊢ e : τ. Types are assigned to write operations by: Γ ⊢ S : τ cmd. Constants can be assigned any type. The following bottom-up notation can be used to decompose the program: ⁠assumption1 ... assumptionn/conclusion⁠. Once the program is decomposed into trivial judgements, by which the type can easily be determined, the types for the less trivial parts of the program can be derived. Each "numerator" is considered in isolation, looking at the type of each statement to see if an allowed type can be derived for the "denominator", based on the defined type system "rules". ==== Rules ==== The main part of the security type system is the rules. They say how the program should be decomposed and how type verification should be performed. This toy program consists of a conditional test and two possible variable assignments. Rules for these two events are defined as follows: Applying this to the simple program introduced above yields: The type system detects the policy violation in line 2, where a read operation of security class {A} is performed, followed by two write operations of a less strict security class {A,B}. In more formalized terms, {A} ⋢ {A,B}, {A,B} (from the rule of the conditional test). Thus, the program is classified as "not typeable". === Soundness === The soundness of a security type system can be informally defined as: If program P is well typed, P satisfies non-interference. Volpano, Smith and Irvine were the first to prove soundness of a security type system for a deterministic imperative programming language with a standard (non-instrumented) semantics using the notion of non-interference.

    Read more →
  • Blanking (video)

    Blanking (video)

    In analog video, blanking occurs between horizontal lines and between frames. In raster scan equipment, an image is built up by scanning an electron beam from left to right across a screen to produce a visible trace of one scan line, reducing the brightness of the beam to zero (horizontal blanking), moving it back as fast as possible to the left of the screen at a slightly lower position (the next scan line), restoring the brightness, and continuing until all the lines have been displayed and the beam is at the bottom right of the screen. Its intensity is then reduced to zero again (vertical blanking), and it is rapidly moved to the top left to start again, creating the next frame. In television, in particular, the vertical blanking interval is long to accommodate the slow equipment available at the time the standard was set. Fast modern electronics allows digital information to be encoded into the signal during the vertical blanking interval; it is not displayed on screen as the beam is blanked, but can be processed by appropriate circuitry.

    Read more →
  • SurveyLab

    SurveyLab

    SurveyLab is an online system designed for creating and deploying surveys, questionnaires, web forms, tests, and quizzes. The platform functions as a web application, without the need for additional software installation. Founded in 2006, by the Polish company 7 Points, SurveyLab is used by businesses and professional users for market research, human resources assessments, customer feedback, and academic research. == History == SurveyLab was launched in 2006 under the name MySurveyLab, developed by the Warsaw-based company 7 Points. Early media coverage described the system as supporting online survey creation, real-time reporting, group collaboration and question logic, and noted that the platform was opened to custom feature development. MySurveyLab featured multi-user accounts, SSL-secured surveys, and support for right-to-left languages. Further 2010s updates improved reporting capabilities, expanded question types, and integration options. In 2020, the platform was rebranded to SurveyLab. By the early 2020s, the software supported integrations with external tools including Zapier, and offered additional analytics features. In 2025, 7 Points reported that SurveyLab had over 85,000 registered users and had processed over 7 million surveys. == Functionalities == SurveyLab is a web-based platform used for creating online surveys, questionnaires, and forms. Independent reviewers and software directories describe it as a tool used for market research, customer feedback management, and human resources-related assessments, including employee feedback surveys. According to the creators at 7 Points, SurveyLab supports customer satisfaction measurement, survey analysis, and 360-degree feedback evaluations. The platform allows users to create surveys with no limits on the number of questions or responses. Independent reviews describe SurveyLab as offering multiple-choice, matrix, rating-scale, and open-ended questions. According to 7 Points, the platform manages market-research workflows, including Net Promoter Score, Customer Satisfaction, and Customer Effort Score questions. The tool can also re-use previous answers in later questions, and create A/B survey variants. SurveyLab can integrate with external services and applications through APIs and third-party connectors. According to its developers, the platform can connect with customer service tools, as well as CRM, marketing automation, e-commerce, and data-storage tools An industry review cited workflow integrations with CINT, Slack, Salesforce, and Zendesk Other integrations included Aquera (SSO), Sona Systems (internet research), and Synerise (customer data management). == Data collection and aggregation == Independent descriptions note that SurveyLab can combine results from emails, SMS, website widgets and pop-ups, QR codes, and social media. Its surveys are also accessible through mobile apps on iOS and Android, used for online and offline data collection in the field. Developers state that the tool supports exporting data as CSV, Excel, and SPSS, with independent reviews also mentioning PDF and PowerPoint. SurveyLab can automate response collection through a multi-channel survey distribution and reporting. It includes data trends, offline responses, and reminders to non-respondents. According to its documentation, newer versions include AI-based tools that detect and analyze sentiment, and a survey builder generating questionnaires based on user prompts. === Data security and compliance === According to 7 Points, SurveyLab provides password-protected surveys, token-based access, IP-address filtering, and two-factor authentication for user accounts, and it complies with the General Data Protection Regulation. == Awards and accolades == In 2017, SurveyLab was listed in Capterra’s Top 20 Survey Software ranking, among 20 highest-scoring survey tools based on market presence and user base. In 2018, a software review platform FinancesOnline awarded SurveyLab the Rising Star Award and the Great User Experience Award, distinctions given to products that demonstrate positive user satisfaction and strong usability characteristics.

    Read more →
  • WS-SecurityPolicy

    WS-SecurityPolicy

    WS-Security Policy is a web services specification, created by IBM and 12 co-authors, that has become an OASIS standard as of version 1.2. It extends the fundamental security protocols specified by the WS-Security, WS-Trust and WS-Secure Conversation by offering mechanisms to represent the capabilities and requirements of web services as policies. Security policy assertions are based on the WS-Policy framework. Policy assertions can be used to require more generic security attributes like transport layer security , message level security or timestamps, and specific attributes like token types. Most policy assertion can be found in following categories: Protection assertions identify the elements of a message that are required to be signed, encrypted or existent. Token assertions specify allowed token formats (SAML, X509, Username etc.). Security binding assertions control basic security safeguards like transport and message level security, cryptographic algorithm suite and required timestamps. Supporting token assertions add functions like user sign-on using a username token. Policies can be used to drive development tools to generate code with certain capabilities, or may be used at runtime to negotiate the security aspects of web service communication. Policies may be attached to WSDL elements such as service, port, operation and message, as defined in WS Policy Attachment. == Sample Policies == Namespaces used by the following XML-snippets: ... Include a timestamp: Use either transport layer security (https) or message level security (XML Dsig/XML Enc): ... ... To define a SAML assertion as security token: ...#SAMLV2.0 Issued token assertion of providers with reference to the STS and required token format: http://sampleorg.com/sts http://docs.oasis-open.org/wss/oasis-wss-saml-token-profile-1.0#SAMLAssertionID ... ... Specify that message header and body need to be signed, and attachments are left unsigned: ? ... specify that message open source license need to be signed, and hydra security are left unsigned: ? ... == Other WS policy languages == The term Web Services Security Policy Language is used for two different XML-based languages: As described above, based on the WS-Policy framework, as defined in, published as version 1.3 in Feb. 2009 WSPL, based on XACML profile for Web-services, but that was not finalized.

    Read more →
  • CityEngine

    CityEngine

    ArcGIS CityEngine is a commercial 3D modeling program. Developed by Esri R&D Center Zurich (formerly Procedural Inc.), it specializes in the generation of 3D urban environments to support the creation of detailed large-scale 3D city models. Unlike traditional 3D modeling methodology, which uses computer-aided design (CAD) tools and techniques, CityEngine takes a procedural modeling approach which shapes generation via a rules-based system. Due to its integration with the wider ArcGIS platform, CityEngine can also be used with geographic information system (GIS) datasets. CityEngine can be used for urban planning and architecture, graphics visualization, game development, entertainment, and archeology. CityEngine can be used to visualize the building information modeling (BIM) data of buildings in a larger urban context, making for more realistic construction projects. == History and releases == === Software history === ArcGIS CityEngine, originally named Esri CityEngine, was developed at Swiss technology university ETH Zurich by Pascal Mueller, the co-founder and CEO of Procedural Inc. While researching for his PhD at the ETH Computer Vision Lab, Mueller invented a number of techniques for procedural modeling of 3D architecture that make up the foundation of CityEngine. CityEngine publically debuted at the 2001 SIGGRAPH conference; since then, additional research papers have been published that have contributed to CityEngine and its features. The first commercial version of CityEngine was released in 2008. In 2007, Procedural Inc. was founded and separated from ETH Zurich, the top-ranking technology university in Switzerland. In the summer of 2011, Procedural Inc. was acquired by Esri Inc., becoming Esri R&D Center Zurich. Esri CityEngine was renamed to ArcGIS CityEngine in June 2020 to offically make it a part of the ArcGIS software suite. === Releases === === Licensing and pricing === ArcGIS CityEngine is included in the Professional and Professional Plus tiers of ArcGIS Online. Pricing may vary by region and distributors. In the US, the professional tier costs US$2,200 per year; in the UK, it is £4,200 per year (excluding VAT). CityEngine can be purchased elsewhere via a local Esri partner. . Once purchased, users can download and obtain license details from the MyEsri portal. == Features == CGA (computer generated architecture) parametric modeling rules to control mass, geometry assets, proportions, or texturing of buildings or streets on a citywide scale Select a target location and import geo-referenced satellite imagery and 3D terrain of the location to more quickly build accurate urban environments through OpenStreetMap integration Interactively control specific street or building parameters, such as height or age Import/export geo-spatial/vector data with industry-standard formats such as Esri Shapefile, File Geodatabase, and OpenStreetMap, as well as file formats for WebGL, KMZ, Collada, Autodesk FBX, Autodesk Maya, 3DS, Wavefront OBJ, RenderMan RIB, Alembic, e-on software's Vue, Universal Scene Description USD, Khronos Group GLTF, Unreal Engine, and Unreal Datasmith Script and generate rules-based reports to show socioeconomic figures (e.g., Gross Floor Area (GFA) and Floor Area Ratio (FAR)) to analyze their urban design proposals. VR viewing of modeled environments with Samsung Gear VR Use a variety of materials through the Esri materials library == Procedural modeling == ArcGIS CityEngine uses a procedural modeling approach to automatically generate models through a predefined rule set. The rules are defined through a CGA shape grammar system, enabling the creation of complex parametric models. Users can change or add the shape grammar as needed. Urban environments can be modeled within CityEngine by starting with creating a street network (either from the street drawing tool or with data imported from map data). Then, lots may be subdivided as many times as specified, resulting in a map of multiple lots and streets. CityEngine can then be instructed to start generating the buildings using defined procedural modeling rules. At this point, the city model can be re-designed and adjusted by changing the parameters or the shape grammar. === Geodesign === Though CityEngine is not an analytical tool like GIS, discussions about geodesign often mention the use of ArcGIS CityEngine. As it can be used to enhance 3D shape generation in ArcGIS, ArcGIS CityEngine is a critical product to improve the applicability of geodesign by using geospatial information to design or analyze a city. == Applications == === Urban design and planning === Garsdale Design used ArcGIS CityEngine in the creation of city master plans in Iraq before 2013, both to model existing historic areas and also model future plans. Larger companies like Foster+Partners and HOK Architects have also used CityEngine in their urban planning projects. === Urban and environmental studies === Because its primary feature is building informative city models, some urban researchers use CityEngine to compare land-use planning schemes, for example in very dense global cities such as Hong Kong and Seoul. Environmental scientists can also utilize the instant 3D model generation in CityEngine, which can make for more convenient informative research than modeling a city by creating each building individually. === Game development === CityEngine can be used as a tool in the creation of video games that require detailed 3D environments to assign interactive scripts. === Movie industry === Zootopia (also known outside of the US as Zootopolis), which won the 2016 Academy Award for Best Animated Feature Film, used CityEngine to model the city in its movie. multi-scaling city, the designers used CityEngine due to its rule-based system. CityEngine was also used to create Big Hero 6's San-Fransokyo. === Military === Due to its integration with the Esri product suite and its ability to process geospatial data to create 3D scenes/maps, CityEngine can be used within military/defense organizations. == List of movies and TV shows using CityEngine == Studios and companies rarely state what software they use in their pipelines. When CityEngine is mentioned as a tool in production, it's often in a small reference in a larger article. Movies only claimed to use CityEngine by a single Esri employee Presented at FMX 2025 workshop == Ports == ArcGIS CityEngine is built on top of Eclipse IDE, and has therefore able to be used on Windows and Linux operating systems. Support for macOS was stopped in March 2021. == Plugins and extensions == ArcGIS CityEngine currently works with a number of third party 3D modeling, rendering, and analytical software products via its SDK and API; these currently are: ArcGIS CityEngine for ArcGIS Urban: ArcGIS Urban Suite Puma: ArcGIS CityEngine for Rhinoceros 3D Palladio: ArcGIS CityEngine for Houdini Serlio: ArcGIS CityEngine for Maya PyPRT: ArcGIS CityEngine for Python ArcGIS CityEngine provides a Python scripting interface built on Jython (current version 2.7.0) which allows users to create their own tools and functionality. == Publications ==

    Read more →
  • IEEE Transactions on Visualization and Computer Graphics

    IEEE Transactions on Visualization and Computer Graphics

    IEEE Transactions on Visualization and Computer Graphics is a peer-reviewed scientific journal published by the IEEE Computer Society. It covers subjects related to computer graphics and visualization techniques, systems, software, hardware, and user interface issues. TVCG has been considered the top journal in the field of visualization. Since 2011, TVCG has allowed authors to present recently accepted papers at partner conferences. These include: IEEE Visualization (VIS), including VAST, InfoVis, and SciVis. IEEE Virtual Reality Conference (IEEE VR) IEEE International Symposium on Mixed and Augmented Reality (ISMAR) ACM Symposium on Interactive 3D Graphics and Games (I3D) IEEE Pacific Visualization Conference (IEEE PacificVis) ACM SIGGRAPH/Eurographics Symposium on Computer Animation (SCA) Eurographics Symposium on Geometry Processing (SGP) Pacific Graphics Conference (PG) Eurovis - The EG and VGTC Conference on Visualization Graphics Interfaces (GI)

    Read more →
  • Video Super Resolution

    Video Super Resolution

    RTX Video Super Resolution (RTX VSR) is a video scaling feature by Nvidia. It was released on February 28, 2023. == History == The feature was first unveiled during CES 2023 as RTX Video Super Resolution. It uses the on-board Tensor Cores to upscale browser video content in real time. Video Super Resolution was initially only available on RTX 30 and 40 series GPUs, while support for 20 series GPUs was added afterwards; it is now available on all Nvidia RTX-branded GPUs. The feature supports input resolutions from 360p to 1440p and a max output of 4K and comes without support for HDR content although that could be likely added in the future. Nvidia released RTX Video Super Resolution 1.5 with improved video quality and RTX 20 series support on October 17, 2023. == Reception == According to ComputerBase, although "the algorithm is not yet working flawlessly", the feature is "overall recommendable".

    Read more →
  • Content Threat Removal

    Content Threat Removal

    Content Threat Removal (CTR) is a cybersecurity technology intended to defeat the threat posed by handling digital content in the cyberspace. Unlike other defenses, including antivirus software and sandboxed execution, CTR does not rely on being able to detect threats. Similar to Content Disarm and Reconstruction, CTR is designed to remove the threat without knowing whether it has done so and acts without knowing if data contains a threat or not. Detection strategies work by detecting unsafe content, and then blocking or removing that content. Content that is deemed safe is delivered to its destination. In contrast, Content Threat Removal assumes all data is hostile and delivers none of it to the destination, regardless of whether it is actually hostile. Although no data is delivered, the business information carried by the data is delivered using new data created for the purpose. == Threat == Advanced attacks continuously defeat defenses that are based on detection. These are often referred to as zero-day attacks, because as soon as they are discovered attack detection mechanisms must be updated to identify and neutralize the attack, and until they are, all systems are unprotected. These attacks succeed because attackers find new ways of evading detection. Polymorphic code can be used to evade the detection of known unsafe data and sandbox detection allows attacks to evade dynamic analysis. == Method == A Content Threat Removal defence works by intercepting data on its way to its destination. The business information carried by the data is extracted and the data is discarded. Then entirely new, clean and safe data is built to carry the information to its destination. The effect of building new data to carry the business information is that any unsafe elements of the original data are left behind and discarded. This includes executable data, macros, scripts and malformed data that trigger vulnerabilities in applications. While CTR is a form of content transformation, not all transformations provide a complete defence against the content threat. == Applicability == CTR is applicable to user-to-user traffic, such as email and chat, and machine-to-machine traffic, such as web services. Data transfers can be intercepted by in-line application layer proxies and these can transform the way information content is delivered to remove any threat. CTR works by extracting business information from data and it is not possible to extract information from executable code. This means CTR is not directly applicable to web browsing, since most web pages are code. It can, however, be applied to content that is downloaded from, and uploaded to, websites. Although most web pages cannot be transformed to render them safe, web browsing can be isolated and the remote access protocols used to reach the isolated environment can be subjected to CTR. CTR provides a solution to the problem of stegware. It naturally removes detectable steganography and eliminates symbiotic and permutation steganography through normalisation.

    Read more →
  • INaturalist

    INaturalist

    iNaturalist is an American 501(c)(3) nonprofit social network of naturalists, citizen scientists, and biologists built on the concept of mapping and sharing observations of biodiversity across the globe. iNaturalist may be accessed via its website or from its mobile applications. iNaturalist includes an automated species identification tool, and users further assist each other in identifying organisms from photographs and sound recordings. As of 5 August 2025, iNaturalist users had contributed nearly 300 million observations of plants, animals, fungi, and other organisms worldwide, and 400,000 users were active in the previous 30 days. iNaturalist serves as an important resource of open data for biodiversity research, conservation, and education, describing itself as "an online social network of people sharing biodiversity information to help each other learn about nature." It is the primary application for crowd-sourced biodiversity data in places such as Mexico, southern Africa, and Australia, and the project has been called "a standard-bearer for natural history mobile applications." Most of iNaturalist's software is open source. It has contributed to over 4,000 research papers and is widely used by scientists, land managers, and conservationists worldwide. The platform has also been active in the discovery of new species and rediscovery of species previously assumed to be extinct. == History == iNaturalist began in 2008 as a UC Berkeley School of Information Master's final project of Nate Agrin, Jessica Kline, and Ken-ichi Ueda. Agrin and Ueda continued work on the site with Sean McGregor, a web developer. In 2011, Ueda began collaboration with Scott Loarie, a research fellow at Stanford University and lecturer at UC Berkeley. Ueda and Loarie are the current co-directors of iNaturalist.org. The organization merged with the California Academy of Sciences on 24 April 2014. In 2017, iNaturalist became a joint initiative between the California Academy of Sciences and the National Geographic Society. With these collaborations and growing popularity of the site since 2012, the number of participants and observations has roughly doubled each year. In 2014, iNaturalist reached 1 million observations. Later, as of October 2023, there were 181 million observations (163 million verifiable). On 11 July 2023 iNaturalist announced its status as a newly independent 501(c)(3) nonprofit organization. === Google AI controversy === On 9 June 2025 Google announced that iNaturalist would be part of its "Generative AI Accelerator". This announcement, paired with the initial lack of information on the iNaturalist site, led to outcry from many iNaturalist users in the blog comments and forum, worrying about the consequences for the environment, volunteer engagement, reliability and raised questions about the decision making within iNaturalist, while some saw the backlash as a sign that people want to resist 'corrosive technologies'. PZ Myers, a biology professor who uses iNaturalist in his teaching, published an article on his website Pharyngula stating that "any decision that drives people away and replaces them with a hallucinating bot is a bad decision". == Platforms == Users can interact with iNaturalist in the following ways: through the iNaturalist.org website, through two mobile apps: iNaturalist (iOS/Android) and Seek by iNaturalist (iOS/Android), or through partner organizations such as the Global Biodiversity Information Facility (GBIF) website. On the iNaturalist.org website, visitors can search the public dataset and interact with other people adding observations and identifications. The website provides tools for registered users to add, identify, and discuss observations, write journal posts, explore information about species, create project pages to recruit participation, and coordinate work on their topics of interest. On the iNaturalist mobile app, users can create and share nature observations to the online dataset, explore observations both nearby and around the world, and learn about different species. Seek by iNaturalist, a separate app marketed to families, requires no online account registration and all observations may remain private. Seek incorporates features of gamification, such as providing a list of nearby organisms to find and encouraging the collection of badges and participation in challenges. Seek was initially released in the spring of 2018. == Observations == The iNaturalist platform is based on crowdsourcing of observations and identifications. An iNaturalist observation records a person's encounter with an individual organism at a particular time and place. An iNaturalist observation may also record evidence of an organism, such as animal tracks, nests, or scat. The scope of iNaturalist excludes natural but inert subjects such as geologic or hydrologic features. Users typically upload photos as evidence of their findings, though audio recordings are also accepted, and such evidence is not a strict requirement. Users may share observation locations publicly, "obscure" them to display a less precise location or make the locations completely private. iNaturalist users can add identifications to each other's observations in order to confirm or improve the identification of the observation. Observations are classified as "Casual", "Needs ID" (needs identification), or "Research Grade" based on the quality of the data provided and the community identification process. Any quality of data can be downloaded from iNaturalist and "Research Grade" observations are often incorporated into other online databases such as the Global Biodiversity Information Facility and the Atlas of Living Australia. === Automated species identification === In addition to observations being identified by others in the community, iNaturalist includes an automated species identification tool, first released in 2017. Images can be identified via a computer vision model which has been trained on the large database of the observations on iNaturalist. Multiple species suggestions are typically provided with the suggestion that the software guesses to be most likely is at the top of the list. A broader taxon such as a genus or family is commonly provided if the model is unsure of the species. It is trained once or twice a year, and the threshold for species included in the training set has changed over time. It can be difficult for the model to guess correctly if the species in question is infrequently observed or hard to identify from images alone, or if the image submitted has poor lighting, is blurry, or contains multiple subjects. In February 2023, iNaturalist released v2.1 of its computer vision model, which was trained on a new source model which performed significantly better than the previous models trained using a different source model. In April 2025 iNaturalist released an updated app for iOS, changing the original version to "iNaturalist Classic." == Projects == Users have created and contributed to tens of thousands of different projects on iNaturalist. The platform is commonly used to record observations during bioblitzes, which are biological surveying events that attempt to record all the species that occur within a designated area, and a specific project type on iNaturalist. Other project types include collections of observations by location or taxon or documenting specific types of observations such as animal tracks and signs, the spread of invasive species, roadkill, fishing catches, or discovering new species. In 2011, iNaturalist was used as a platform to power the Global Amphibian and Global Reptile BioBlitzes, in which observations were used to help monitor the occurrence and distribution of the world's reptiles and amphibian species. The US National Park Service partnered with iNaturalist to record observations from the 2016 National Parks BioBlitz. That project exceeded 100,000 observations in August 2016. In 2017, the United Nations Environment Programme teamed up with iNaturalist to celebrate World Environment Day.. In 2022, Reef Ecologic teamed up with iNaturalist to celebrate World Oceans Day. === City Nature Challenge === In 2016, Lila Higgins from the Natural History Museum of Los Angeles County and Alison Young from the California Academy of Sciences co-founded the City Nature Challenge (CNC). In the first City Nature Challenge, naturalists in Los Angeles and the San Francisco Bay Area documented over 20,000 observations with the iNaturalist platform. In 2017, the CNC expanded to 16 cities across the United States and collected over 125,000 observations of wildlife in 5 days. The CNC expanded to a global audience in 2018, with 68 cities participating from 19 countries, with some cities using community science platforms other than iNaturalist to participate. In 4 days, over 17,000 people cataloged over 440,000 nature observations in urban regions around the world. In 2019, the CNC once again expanded, with 35,000 parti

    Read more →
  • Vulnerabilities Equities Process

    Vulnerabilities Equities Process

    The Vulnerabilities Equities Process (VEP) is a process used by the U.S. federal government to determine on a case-by-case basis how it should treat zero-day computer security vulnerabilities: whether to disclose them to the public to help improve general computer security, or to keep them secret for offensive use against the government's adversaries. The VEP was first developed during the period 2008–2009, but only became public in 2016, when the government released a redacted version of the VEP in response to a FOIA request by the Electronic Frontier Foundation. Following public pressure for greater transparency in the wake of the Shadow Brokers affair, the U.S. government made a more public disclosure of the VEP process in November 2017. == Participants == According to the VEP plan published in 2017, the Equities Review Board (ERB) is the primary forum for interagency deliberation and determinations concerning the VEP. The ERB meets monthly, but may also be convened sooner if an immediate need arises. The ERB consists of representatives from the following agencies: Office of Management and Budget Office of the Director of National Intelligence (including the Intelligence Community-Security Coordination Center) United States Department of the Treasury United States Department of State United States Department of Justice (including the Federal Bureau of Investigation and the National Cyber Investigative Joint Task Force) Department of Homeland Security (including the National Cybersecurity and Communications Integration Center and the United States Secret Service) United States Department of Energy United States Department of Defense (to include the National Security Agency, including Information Assurance and Signals Intelligence elements), United States Cyber Command, and DoD Cyber Crime Center) United States Department of Commerce Central Intelligence Agency The National Security Agency serves as the executive secretariat for the VEP. == Process == According to the November 2017 version of the VEP, the process is as follows: === Submission and notification === When an agency finds a vulnerability, it will notify the VEP secretariat as soon as is possible. The notification will include a description of the vulnerability and the vulnerable products or systems, together with the agency's recommendation to either disseminate or restrict the vulnerability information. The secretariat will then notify all participants of the submission within one business day, requesting them to respond if they have an relevant interest. === Equity and discussions === An agency expressing an interest must indicate whether it concurs with the original recommendation to disseminate or restrict within five business days. If it does not, it will hold discussions with the submitting agency and the VEP secretariat within seven business days to attempt to reach consensus. If no consensus is reached, the participants will suggest options for the Equities Review Board. === Determination to disseminate or restrict === Decisions whether to disclose or restrict a vulnerability should be made quickly, in full consultation with all concerned agencies, and in the overall best interest of the competing interests of the missions of the U.S. government. As far as possible, determinations should be based on rational, objective methodologies, taking into account factors such as prevalence, reliance, and severity. If the review board members cannot reach consensus, they will vote on a preliminary determination. If an agency with an equity disputes that decision, they may, by providing notice to the VEP secretariat, elect to contest the preliminary determination. If no agency contests a preliminary determination, it will be treated as a final decision. === Handling and follow-on actions === If vulnerability information is released, this will be done as quickly as possible, preferably within seven business days. Disclosure of vulnerabilities will be conducted according to guidelines agreed on by all members. The submitting agency is presumed to be most knowledgeable about the vulnerability and, as such, will be responsible for disseminating vulnerability information to the vendor. The submitting agency may elect to delegate dissemination responsibility to another agency on its behalf. The releasing agency will promptly provide a copy of the disclosed information to the VEP secretariat for record keeping. Additionally, the releasing agency is expected to follow up so the ERB can determine whether the vendor's action meets government requirements. If the vendor chooses not to address a vulnerability, or is not acting with urgency consistent with the risk of the vulnerability, the releasing agency will notify the secretariat, and the government may take other mitigation steps. == Criticism == The VEP process has been criticized for a number of deficiencies, including restriction by non-disclosure agreements, lack of risk ratings, special treatment for the NSA, and less than whole-hearted commitment to disclosure as the default option. == UK equivalent == British intelligence agencies—GCHQ in particular—follow a similar approach, also known as the Equities Process, to determine whether to disclose or retain security vulnerabilities. The Investigatory Powers Act 2016 was amended in 2022 to bring oversight of the operation of the process within the remit of the Investigatory Powers Commissioner. Details of the process were made public in 2018.

    Read more →
  • MyPoolin

    MyPoolin

    Mypoolin is a mobile peer-to-peer and group payment application. Their software allows the settling of debts and group-expenditure for events and activities. The software utilizes Unified Payment Interface of India to collect and settle daily expenses with friends. Users can also plan and pay together for group-gifting, movies, vacations, concerts, events, and parties. == Service == Mypoolin is a mobile payment provider that lets its users transfer money to other users via their mobile number. A user can create an account by verifying an OTP code which is sent to his mobile phone. It also allows the users to track their friends’ activities on the app. == History == Mypoolin was founded by Rohit Taneja (IIT Delhi) and Ankit Singh (FMS Delhi) in 2014 as a medium to aggregate money for various purposes in a hassle free and quick manner. Prior to the mobile app launch, Mypoolin was initially launched as a web application. == Funding == Mypoolin has been seed funded by angel investors. As winners of the QPrize 2015, Mypoolin jointly received an additional funding of $250,000 from Qualcomm Ventures. == Growth == Mypoolin reached INR 10 lakhs in revenue during its first four months of the web application launch, and was listed in the "Top ten free apps" in its category within the first 5 days of the Android app launch. It was one of the Top 50 start-ups in Asia at the Echelon Asia Summit held in Singapore. And among the top 3 start-ups in 1776 Cup Challenge 2016. Apple Inc also featured the app on their app store in India. == Features == Users are able to collect and share money on the app for daily uses like movies, events and trips. The money collected can then be redeemed in the form of an online voucher redeemable across several e-commerce sites. The amount can be redeemed also in the form of an offline debit card delivered to the address or in the form of a wire transfer. == Media coverage == Mypoolin was featured in The Economic Times and The Hindu Business Line after winning the Qualcomm Ventures' QPrize 2015. Digit magazine featured them recently as the app of the week. The app has mostly grown organically so far in the Indian urban millennial space.

    Read more →
  • Zero-day vulnerability

    Zero-day vulnerability

    A zero-day (also known as a 0-day) is a vulnerability or security hole in a computer system unknown to its developers or anyone capable of mitigating it. Until the vulnerability is remedied, threat actors can exploit it in a zero-day exploit, or zero-day attack. The term "zero-day" originally referred to the number of days since a new piece of software was released to the public, so "zero-day software" was obtained by hacking into a developer's computer before release. Eventually the term was applied to the vulnerabilities that allowed this hacking, and to the number of days that the vendor has had to fix them. Vendors who discover the vulnerability may create patches or advise workarounds to mitigate it, though users need to deploy that mitigation to eliminate the vulnerability in their systems. Zero-day attacks are severe threats. == Definition == Despite developers' goal of delivering a product that works entirely as intended, virtually all products contain software and hardware bugs. If a bug creates a security risk, it is called a vulnerability. Vulnerabilities vary in their ability to be exploited by malicious actors. Some are not usable at all, while others can be used to disrupt the device with a denial of service attack. The most dangerous allow the attacker to inject and run their own code, without the user being aware of it. Although the term "zero-day" initially referred to the time since the vendor had become aware of the vulnerability, zero-day vulnerabilities can also be defined as the subset of vulnerabilities for which no patch or other fix is available. A zero-day exploit is any exploit that takes advantage of such a vulnerability. == Exploits == An exploit is the delivery mechanism that takes advantage of the vulnerability to penetrate the target's systems, for such purposes as disrupting operations, installing malware, or exfiltrating data. Researchers Lillian Ablon and Andy Bogart write that "little is known about the true extent, use, benefit, and harm of zero-day exploits". Exploits based on zero-day vulnerabilities are considered more dangerous than those that take advantage of a known vulnerability. However, it is likely that most cyberattacks use known vulnerabilities, not zero-days. Governments of states are the primary users of zero-day exploits, not only because of the high cost of finding or buying vulnerabilities, but also the significant cost of writing the attack software. Nevertheless, anyone can use a vulnerability, and according to research by the RAND Corporation, "any serious attacker can always get an affordable zero-day for almost any target". Many targeted attacks and most advanced persistent threats rely on zero-day vulnerabilities. In 2017, the average time to develop an exploit from a zero-day vulnerability was estimated at 22 days. The difficulty of developing exploits has been increasing over time due to increased anti-exploitation features in popular software. === Window of vulnerability === Zero-day vulnerabilities are often classified as alive—meaning that there is no public knowledge of the vulnerability—and dead—the vulnerability has been disclosed, but not patched. If the software's maintainers are actively searching for vulnerabilities, it is a living vulnerability; such vulnerabilities in unmaintained software are called immortal. Zombie vulnerabilities can be exploited in older versions of the software but have been patched in newer versions. Even publicly known and zombie vulnerabilities are often exploitable for an extended period. Security patches can take months to develop, or may never be developed. A patch can have negative effects on the functionality of software and users may need to test the patch to confirm functionality and compatibility. Larger organizations may fail to identify and patch all dependencies, while smaller enterprises and personal users may not install patches. Research suggests that risk of cyberattack increases if the vulnerability is made publicly known or a patch is released. Cybercriminals can reverse engineer the patch to find the underlying vulnerability and develop exploits, often faster than users install the patch. According to research by RAND Corporation published in 2017, zero-day exploits remain usable for 6.9 years on average, although those purchased from a third party only remain usable for 1.4 years on average. The researchers were unable to determine if any particular platform or software (such as open-source software) had any relationship to the life expectancy of a zero-day vulnerability. Although the RAND researchers found that 5.7 percent of a stockpile of secret zero-day vulnerabilities will have been discovered by someone else within a year, another study found a higher overlap rate, as high as 10.8 percent to 21.9 percent per year. == Countermeasures == Because, by definition, there is no patch that can block a zero-day exploit, all systems employing the software or hardware with the vulnerability are at risk. This includes secure systems such as banks and governments that have all patches up to date. Security systems are designed around known vulnerabilities, and repeated exploitations of a zero-day exploit could continue undetected for an extended period of time. Although there have been many proposals for a system that is effective at detecting zero-day exploits, this remains an active area of research in 2023. Many organizations have adopted defense-in-depth tactics so that attacks are likely to require breaching multiple levels of security, which makes it more difficult to achieve. Conventional cybersecurity measures such as training and access control — including multi-factor authentication, least-privilege access, and air-gapping makes it harder to compromise systems with a zero-day exploit. Since writing perfectly secure software is impossible, some researchers argue that driving up the cost of exploits is considered a good strategy to reduce the burden of cyberattacks. == Market == Zero-day exploits can fetch millions of dollars. There are three main types of buyers: White: the vendor, or to third parties such as the Zero Day Initiative that disclose to the vendor. Often such disclosure is in exchange for a bug bounty. Not all companies respond positively to disclosures, as they can cause legal liability and operational overhead. It is not uncommon to receive cease-and-desist letters from software vendors after disclosing a vulnerability for free. Gray: the largest and most lucrative. Government or intelligence agencies buy zero-days and may use it in an attack, stockpile the vulnerability, or notify the vendor. The United States federal government is one of the largest buyers. As of 2013, the Five Eyes (United States, United Kingdom, Canada, Australia, and New Zealand) captured the plurality of the market and other significant purchasers included Russia, India, Brazil, Malaysia, Singapore, North Korea, and Iran. Middle Eastern countries were poised to become the biggest spenders. Black: organized crime, which typically prefers exploit software rather than just knowledge of a vulnerability. These users are more likely to employ "half-days" where a patch is already available. In 2015, the markets for government and crime were estimated at least ten times larger than the white market. Sellers are often hacker groups that seek out vulnerabilities in widely used software for financial reward. Some will only sell to certain buyers, while others will sell to anyone. White market sellers are more likely to be motivated by non pecuniary rewards such as recognition and intellectual challenge. Selling zero-day exploits is legal. Despite calls for more regulation, law professor Mailyn Fidler says there is little chance of an international agreement because key players such as Russia and Israel are not interested. The sellers and buyers that trade in zero-days tend to be secretive, relying on non-disclosure agreements and classified information laws to keep the exploits secret. If the vulnerability becomes known, it can be patched and its value consequently crashes. Because the market lacks transparency, it can be hard for parties to find a fair price. Sellers might not be paid if the vulnerability was disclosed before it was verified, or if the buyer declined to purchase it but used it anyway. With the proliferation of middlemen, sellers could never know to what use the exploits could be put. Buyers could not guarantee that the exploit was not sold to another party. Both buyers and sellers advertise on the dark web. Research published in 2022 based on maximum prices paid as quoted by a single exploit broker found a 44 percent annualized inflation rate in exploit pricing. Remote zero-click exploits could fetch the highest price, while those that require local access to the device are much cheaper. Vulnerabilities in widely used software are also more expensive. They estimated that around 400 to 1,500 people sold exploits to th

    Read more →
  • Vigloo

    Vigloo

    Vigloo (Korean: 비글루) is a South Korean microdrama, also known as short-form drama, series streaming platform owned by SpoonLabs, with headquarters in Seoul. It provides content produced in South Korea, Japan, and the United States. Vigloo produced the first AI-created short-form drama in South Korea. == History == Vigloo launched in July 2024. After receiving an equity investment of $86 million (₩120 billion) by South Korean video game company Krafton in September 2024, Vigloo expanded to the U.S. In January 2025, Vigloo unveiled its first in-house produced drama, Xs Who Want to Kill: Adultery Investigation Unit. Vigloo had been testing the use of AI in post-production and visual effects, and in October 2025 released two original dramas produced entirely with AI. It adapted its live action Japanese short-form drama Boyfriend Search Project – Kissing 5 Men into the first short-form animation series made with AI technology in South Korea. Of the top free entertainment iOS apps in South Korea, Vigloo ranks Number 3 as of January 2026. == Service == === Content === Vigloo offers both original and licensed content. It partnered with Passionflix to repackage the latter's original series The Secret Life of Amy Bensen into 35 vertical "bite-sized episodes". The most popular genre is romance, such as romantasy. === Business Model === Vigloo is available around the world, providing subtitles in nine languages, including Korean, English, and Japanese. Fifty percent of Vigloo's revenue comes from the U.S. Vigloo operates on a freemium model, where viewers can try several episodes and then can choose to continue by subscription or in-app purchases. As of September 2025, 70% of Vigloo viewers were over 35 years old. === Microdramas === Emerging during the early COVID period in China, microdramas have grown into a 7-billion-dollar market with dozens of dedicated platforms now operating. Although the format first expanded across Asia, short-form scripted content optimized for mobile viewing is increasingly being produced and watched in markets worldwide. == Series == A Vampire in the Alpha's Den Fight for Love Matrimoney Signed, Sealed, Deceived by My Billionaire Mailboy Spring Break Bucket List Stake to the Heart

    Read more →