AI Detector And Fixer

AI Detector And Fixer — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Camera interface

The Camera Interface block or CAMIF is the hardware block that interfaces with different image sensor interfaces and provides a standard output that can be used for subsequent image processing. A typical Camera Interface would support at least a parallel interface although these days many camera interfaces are beginning to support the Mobile Industry Processor Interface (MIPI) Camera Serial Interface (CSI) interface. == Electrical connections == The camera interface's parallel interface consists of the following lines: 8 to 12 bits parallel data line These are parallel data lines that carry pixel data. The data transmitted on these lines change with every Pixel Clock (PCLK). Horizontal Sync (HSYNC) This is a special signal that goes from the camera sensor or ISP to the camera interface. An HSYNC indicates that one line of the frame is transmitted. Vertical Sync (VSYNC) This signal is transmitted after the entire frame is transferred. This signal is often a way to indicate that one entire frame is transmitted. Pixel Clock (PCLK) This is the pixel clock and it would change on every pixel. NOTE: The above lines are all treated as input lines to the Camera Interface hardware.
Read more →
Masking (art)

In art, craft, and engineering, masking is the use of materials to protect areas from change, or to focus change on other areas. This can describe either the techniques and materials used to control the development of a work of art by protecting a desired area from change; or a phenomenon that (either intentionally or unintentionally) causes a sensation to be concealed from conscious attention. The term is derived from the word mask, in the sense that it hides the face from view. == In painting == Masking materials supplement a painter's dexterity and choice of applicator to control where paint is laid. Examples include the use of a stencil or masking tape to protect areas which are not to be painted. === Solid masks === Most solid masks require an adhesive to hold the mask in place while work is performed. Some, such as masking tape and frisket, come with adhesive pre-applied. Solid masks are readily available in bulk, and are used in large painting jobs. Paper products Kraft paper Butcher paper Masking tape Plastic film Frisket Polyester tape Stencils Silk screen === Liquid masks === Liquid masks are preferred where precision is needed; they prevent paint from seeping underneath, resulting in clean edges. Care must be taken to remove them without damaging the work underneath. Latex or other polymers Molten wax Gesso, typically a substrate for painting, but can also be applied to achieve masking effects == In photography == Masks used for photography are used to enhance the quality of an image. Representations of a scene—whether film, video display, or printed—do not have the dynamic contrast range available to the human eye looking directly at the same scene. Adjusting the contrast in an image helps restore some of the perceived qualities of the original scene. These adjustments are typically performed on "blown-out" highlights, and "crushed" or "muddy" shadow areas, where clipping has occurred; or on desaturated colors. Photographic masks are peculiar in that they are produced from the image they will alter, an exercise in recursion. Masks used to produce other effects are similar to those used in painting. === Controlling exposure === ==== Film ==== The basic methods of controlling exposure are dodging and burning, which respectively lighten (reduce exposure) and darken (increase exposure) areas of an image. The tools a film photographer uses range from shaped pieces of black material (such as studio foil, foam, and paper) to the photographer's hands. To create a photographic mask, a sheet of negative film is contact-exposed to the original film negative or slide positive in a particular way. Both films are then combined to produce a processed positive. The process is similar when applied using digital techniques: the inverse of the working image is reduced to an image mask; filters or other adjustments are then applied, using the mask to selectively block portions of the image. ==== Digital ==== Image editors offer at the very least a "Select All" command and a rectangular "marquee" selection tool. (The word "marquee" describes the "crawling ants" border used to highlight the active region.) Once a selection is created, further changes to the image will be confined to that area. To continue editing the rest of the image, the selection is either "deselected" or the entire image is selected. Advanced suites offer more ways to select portions of an image, as well as ways to combine these selections through. Selection masks can be switched between an editable greyscale image and a mask. They allow the user to create a mask using the suite's painting tools. === Contrast masking === When the contrast range of an image needs to be adjusted, a contrast mask is a simple solution. The processed image resembles what would be achieved when exposing through a neutral density filter, but the effects are focused highly upon the extreme regions of the image. The blocking areas of the mask coincide with the highlights of the image, and the permissive areas with the shadows, resulting in more detail appearing in each. ==== Film ==== The mask is often made from high-quality black-and-white film, such as Kodak Technical Pan, which allows for a degree of softening on the mask. Its processing time is reduced so as to not completely oppose the original negative. Both negatives are combined and registered, and collectively exposed with additional time to compensate for the presence of the mask. ==== Digital ==== Contrast masking is made simpler with digital editing. A grayscale version of the image is produced, either by desaturation or by calculating selected ratios of the image's color channels, inverted, and blurred. The mask and original image are blended together to produce the final processed image. Some image editors allow for refinement of the effect by changing the strength of the blend. Contrast masking can be considered to be the opposite of gamma correction, which adjusts the midtones of an image. Effects similar to contrast masking can be achieved by adjusting the response curves of an image. === Unsharp masking === A derivative of contrast masking is unsharp masking, an unusual term for a process intended to increase the apparent sharpness (acutance) of an image. Unsharp masking uses a blurred form of the image to increase contrast along regions of moderate contrast difference. Around edges, the blur region causes highlights to overexpose and shadows to underexpose. Taken to an extreme, the edges become overly visible and detract from the quality of the image—this is referred to as halation. Unsharp masking does not increase the actual sharpness, as it cannot recover details lost to blurring. ==== Film ==== Unsharp masking allows the photographer to sharpen areas that have become blurred in the original negative, due to long shutter speed/exposure time, or from using a wide aperture/"fast" lens. When creating the unsharp mask, extra space or diffusing material is added between the image and the mask to produce the necessary blur. ==== Digital ==== Unsharp masking has become automated in digital editing, with higher-end suites offering the process as a "tool" or "filter" in their standard sharpening kits—the actual creation of a mask is bypassed in favor of calculations that represent the mask's effect. The process depends on three factors: the radius of the blur, the strength of the effect, and the threshold degree of contrast above which the effect will be applied. (Adjusting the threshold allows the editor to apply the effect selectively upon moderately defined edges and ignore image noise.) Unsharp masking is computationally more complex than other sharpening algorithms, but results in a higher-quality remedy. Deconvolution allows for truer sharpening, but is much more complex than unsharp masking.
Read more →
Diia

Diia (Ukrainian: Дія [ˈd⁽ʲ⁾ijɐ] , lit. 'Action'; also an acronym for Держава і Я, Derzhava i Ya, IPA: [derˈʒɑwɐ i ˈjɑ], lit. 'State and Me') is a mobile app, a web portal and a brand of e-governance in Ukraine. Launched in 2020, the Diia app allows Ukrainian citizens to use digital documents on their smartphones instead of physical ones for identification and sharing purposes. The Diia portal allows access to over 130 government services. Eventually, the government plans to make all kinds of state-person interactions available through Diia. Diia was built in partnership with the United States and is poised to be shared with other countries. On the sidelines of the 2023 World Economic Forum in Davos, USAID Administrator Samantha Power said the US hopes to replicate the success of Diia in other countries. == History == Diia was first presented on September 27, 2019, by the Ministry of Digital Transformation of Ukraine as a brand of the State in a Smartphone project. Vice Prime Minister and Minister of Digital Transformation Mykhailo Fedorov announced the creation of a mobile app and a web portal that would unite in a single place all the services provided by the state to citizens and businesses. On February 6, 2020, the mobile app Diia was officially launched. During the presentation, Ukrainian President Volodymyr Zelensky said that 9 million Ukrainians now have access to their driver's license and car registration documents on their phones, while Prime Minister Oleksiy Honcharuk called the implementation of the State in a Smartphone project a priority for the government. In April 2020, the Ukrainian government approved a resolution for experimental usage of digital ID-cards and passports which would be issued to all Ukrainians via the Diia. On October 5, 2020, during the Diia Summit, the government presented a first major update of the app and web portal branded "Diia 2.0". More types of documents were added to the app as well as the ability to share documents with others via a single tap on a push-message. The web portal in turn expanded the number of available services to 27, including the ability to register a private limited company in half an hour. President Zelensky who opened the summit, announced that in 2021 Ukraine will enter the "paper less" mode by prohibiting civil servants from demanding paper documents. By the end of 2020, the app had more than six million users, while the portal had 50 available services. In March 2021, the Ukrainian parliament adopted a bill equating digital identity documents with their physical analogues. Starting on August 23, Ukrainian citizens can use digital ID-cards and passports for all purposes while in Ukraine. According to Minister of Digital Transformation Mykhailo Fedorov, Ukraine will become the first country in the world where digital identity documents are considered legally equivalent to ordinary ones. In September 2024, Diia launched an online marriage registration service, which can be beneficial especially for military personnel who spend much time on the frontline separated from their partners. In October 2024, Diia's online marriage service appeared in Time's Inventions of the 2024 list. In the first month of its operations over 1.1 million Ukrainians tried to make proposals using the technology, and 435 couples got married. == Benefits and challenges == The first and most obvious benefit is the convenience of such a platform. Citizens can have many documents on their smartphones at once, without concern about losing or damaging them. Whenever needed, they can just open an app on their smartphones and show/check the document they need. The idea is that Diia will help cut the bureaucracy associated with public services, which in turn will help fight corruption and increase government savings. Fewer people are needed to be employed in the public sector and fewer human to human interactions are supposed to happen. With the start of the program, already 10% of government employees were reduced, which contributes to hundreds of millions of dollars in savings, but besides this, the initiative also improves the speed, efficiency, and transparency of government services. In addition, the digitalization of the government sector helps to develop the whole IT industry in the country, people become more digitally aware and educated, this affects other sectors as well, increasing the spread of digital infrastructure and expediting the speed of overall digitalization. The UN E-government Development Index, which assesses the capabilities of governments to integrate its functions electronically, such as the use of internet and mobile devices, ranked Ukraine 69th in 193 countries surveyed in 2020. Despite its low ranking in the e-government development index, Ukraine made a big jump on the e-participation index, which they ranked 43rd out of 193 countries from 0.66 in 2018 to 0.81 in 2020 (un.org, 2020), suggesting that the government and its citizens are adapting the IT-based government functions. The main goal of e-government according to Perez-Morote et.al. (2020) is to have accountability and transparency among the countries involved. But to do so, there are several challenges that a country should assess first prior to implementing e-government. In the research written by Heeks (2001), the author identified 2 main challenges that countries face in the development of e-government, first is the strategic challenge which involves the preparedness (e-readiness) of the entire government system for electronic transformation, and second challenge is the tactical challenge where the government must design (e-governance design) a system where it can be understood by every user, it's important that the information that needs to be communicated to the consumers is received clearly. For the first challenge (e-readiness), Ukraine had an internet penetration rate of 76% in 2020 and is expected to grow to 82%, it is important that consumers have the internet access for it to enable the consumers to utilize the service. Another factor is the readiness of its institutional infrastructure, which means that the government has its own organization which is solely focused on implementing the e-government project. In the case of Ukraine, the e-governance team is led by Oleksandr Ryzhenko, and the country's e-governance initiative is even further strengthened by ensuring that the data and legal infrastructure are already prepared. Ukraine has done this by modernizing their legislation that is more appropriate in the digital service, and the data exchange solution used by Ukraine is called Trembita. The human infrastructure is also being updated, as competent individuals must be the one doing the task, hence, EGOV4UKRAINE was launched, this aims to get IT developers for developing a system for administrative services. These efforts by the Ukrainian government did not go unnoticed, and they received an award from the e-Governance Academy as "partner of the year 2017". For the second challenge, which deals with the system design, the success of Ukraine can be seen on the latest data of UNDP, where it shows a high increase in the E-participation index. In 2018, Ukraine ranked 75th it ranked 46th in 2020 (un.org, 2020). Despite visible success, the implementation of the e-government was accompanied by problems. Data leakage became the main one. In May 2020, the data of 26 million driver's licenses appeared in the public domain on the Internet. The Ukrainian government said the Diia app was not linked to a data breach, but it is impossible to say for certain. Any storage of official documents in electronic format is associated with the risk of their leakage. In addition, the Diia application still has data protection issues, as the required protection system has not been implemented. This is also compounded by the country's weak data protection legal regime. In addition, since 2023, Ukrainians are able to register their cars with this app. Issued license plates are not using regional codes, but they are using special codes starting with DI or PD. == Diia City == In May 2020, the government presented Diia City headed by Oleksandr Borniakov, a large-scale project which would establish a virtual model of a free economic zone for representatives of the creative economy. It would provide for special digital residency with a particular taxation regime, intellectual property protection and simplified regulations. Diia City concurrently imposes certain constraints on contracts involving individual entrepreneurs (FOPs). It also offers the benefit of tax rebates. Diia City garners endorsement from the Ukrainian government, believing it will support the country's position in the IT market. As of July 30, 2023, the program had more than 600 residents, including companies like iGama, Avenga, SBRobotiks, and Intellectsoft.
Read more →
Lawbot

Lawbots are a broad class of customer-facing legal AI applications that are used to automate specific legal tasks, such as document automation and legal research. The terms robot lawyer and lawyer bot are used as synonyms to lawbot. A robot lawyer or a robo-lawyer refers to a legal AI application that can perform tasks that are typically done by paralegals or young associates at law firms. However, there is some debate on the correctness of the term. Some commentators say that legal AI is technically speaking neither a lawyer nor a robot and should not be referred to as such. Other commentators believe that the term can be misleading and note that the robot lawyer of the future will not be one all-encompassing application but a collection of specialized bots for various tasks. Lawbots use various artificial intelligence techniques or other intelligent systems to limit humans' direct ongoing involvement in certain steps of a legal matter. The user interfaces on lawbots vary from smart searches and step-by-step forms to chatbots. Consumer and enterprise-facing lawbot solutions often do not require direct supervision from a legal professional. Depending on the task, some client-facing solutions used at law firms operate under an attorney supervision. == Levels of autonomy == The following levels of autonomy (LoA) are suggested for automated AI legal reasoning: Level 0 (LoA0): No automation for AI legal reasoning Level 1 (LoA1): Simple assistance automation Level 2 (LoA2): Advanced assistance automation Level 3 (LoA3): Semi-autonomous automation Level 4 (LoA4): Domain automation Level 5 (LoA5): Fully-autonomous automation Level 6 (LoA6): Superhuman automation == Examples == Some legal AI solutions are developed and marketed directly to the customers or consumers, whereas other applications are tools for the attorneys at law firms. There are already hundreds of legal AI solutions that operate in multitude of ways varying in sophistication and dependence on scripted algorithms. One notable legal technology chatbot application is DoNotPay. It had started off as an app for contesting parking tickets, but has since expanded to include features that help users with many different types of legal issues, ranging from consumer protection to immigration rights and other social issues. == Impact on the legal industry == In the 2016 report, Deloitte estimated that more than 110,000 law jobs in just the United Kingdom alone could disappear within the next twenty years due to automation. This change could result in the creation of more highly skilled jobs and in the reduction of paralegal and temporary positions. Deloitte's report asserts that "there is significant potential for high-skilled roles that involve repetitive processes to be automated by smart and self-learning algorithms". According to Lawyers to Engage, between 22% of a lawyer’s work and 35% of a legal assistant’s work can be automated in the US. Top law schools like Harvard have already begun to integrate Artificial Intelligence into the curriculum. Legal tech start-up companies have begun developing applications that assist law firms with completing low-risk legal processes. These applications can enable lawyers to focus on more work that requires their specific expertise. The automation of processes like contract reviewing, enforcement of negotiations (smart contracts) and client intake (expert systems) allows law firms to streamline their procedures and improve efficiency. In addition, automation benefits small-to-medium law firms that do not have the resources to utilize junior talent on such routine tasks. The increase of law firms utilizing automated applications could result into legal tech becoming a necessity in the industry. Digital Reason CEO, Tim Estes, stated that those who refuse the opportunity to integrate AI in their workflow are “most at risk.” In 2018, Forbes reported a 713% increase in investments in legal tech. This rapid growth is reflective of law firms beginning to “cede business to… new model legal providers… that meld technological, business and legal expertise.” == Access to law and justice == It has been widely estimated for at least the last generation that all the programs and resources devoted to ensuring access to justice address only 20% of the civil legal needs of low-income people in the United States. Drawing on this experience, in late 2011, the U.S. government-funded Legal Services Corporation decided to convene a summit of leaders to explore how best to use technology in the access-to-justice community. The group adopted a mission for The Summit on the Use of Technology to Expand Access to Justice (Summit) consistent with the magnitude of the challenge: "to explore the potential of technology to move the United States toward providing some form of effective assistance to 100% of persons otherwise unable to afford an attorney for dealing with essential civil legal needs". In April 2017, joined by Microsoft and Pro Bono Net, the Legal Services Corporation (LSC) announced a pilot program to develop online, statewide legal portals to direct individuals with civil legal needs to the most appropriate forms of assistance. == Technological limitations == Current research in subjects such as computational privacy, explainable machine learning, Bayesian deep learning, knowledge-intensive machine learning, and transfer learning reveals that we do not yet have the technology to enable Level 4 to 6 AI lawbots. In 2023, OpenLaw began developing a model called Law Bot, which interacts in a conversational way as an attorney. The dialogue format makes it possible for Law Bot to answer follow-up questions, challenge incorrect premises, and reject inappropriate requests. Currently, they try to ensure it is in full compliance with all laws and regulations while conducting further beta testing before releasing it to the general public.
Read more →
Brave Leo

Brave Leo is a large language model-based chatbot developed by Brave Software and included with the Brave browser. == History == In November 2023, the company said versions for iOS and Android would be available "in the coming months". == Features == Since January 2024, Leo has used the open-source Mixtral 8x7B from Mistral AI as its default large language model, in addition to LLaMA 2 from Meta Platforms and Claude from Anthropic, both of which have been used previously. Leo can suggest follow-up questions, and summarize webpages, PDFs, and videos. Leo has a $15 (US) per month premium version that enables more requests and uses larger LLMs. == Privacy == The answers given by Leo are not saved. Brave uses the slogan Love Privacy to emphasize its focus on user privacy and data protection. The phrase has been featured in Brave's official marketing campaigns and has been cited in media coverage of the browser's privacy-first approach. == Controversies == In 2023, PC World reported that Leo evades questions about US elections.
Read more →
Captions (app)

Mirage (formerly known as Captions) is a video-generating, video-editing and AI research company headquartered in New York City. Their first app, Captions, is available on iOS, Android, and Web and offers a suite of tools aimed at streamlining the creation and editing of videos. Their enterprise platform, Mirage Studio, generates AI actors and videos for marketing assets and video campaigns. == History == Mirage was co-founded by Gaurav Misra and Dwight Churchill. During Misra's time leading design engineering at Snap Inc., he followed the rise of a new category of video, the "talking video." In 2021, Misra left Snap to found Mirage with his former colleague Churchill. Later that year, the Captions app launched with early backing from venture capital firms Sequoia Capital and Andreessen Horowitz as well as individual investors. In 2023, the company released Lipdub, an Al dubbing app which translates any video with spoken audio into 28 languages. In October 2023, Captions shared that it maintained over 100,000 daily active users with "about a million" videos being created monthly. In November 2024, Captions acquired AlpacaML, a generative AI company that focused on art and other images. In June 2025, Captions launched Mirage Studio, for marketers and advertising agencies. In September 2025, Captions rebranded their company to Mirage. This change reflects the company's focus on developing their proprietary foundation model and future video products. == Products == The Captions app offers features to automate common production tasks including captioning, editing, dubbing, script creation, and music integration. Mirage Studio allows users to generate AI avatars and create short-form videos from prompts or audio. == Awards == In 2023, the company was recognized as part of Fast Company's "Next Big Things In Tech" series. In 2024, the company won 2 Webby Awards for Best Use of AI & Machine Learning and Creative Production.
Read more →
LCD crosstalk

LCD crosstalk is a visual defect in an LCD screen which occurs because of interference between adjacent pixels. Owing to the way rows and columns in the display are addressed, and charge is pushed around, the data on one part of the display has the potential to influence what is displayed elsewhere. This is generally known as crosstalk, and in matrix displays typically occurs in the horizontal and vertical directions. Crosstalk used to be a serious problem in the old passive-matrix (STN) displays, but is rarely discernable in modern active-matrix (TFT) displays. A fortunate side effect of inversion (see above) is that, for most display material, what little crosstalk there is largely cancelled out. For most practical purposes, the level of crosstalk in modern LCDs is negligible. Certain patterns, particularly those involving fine dots, can interact with the inversion and reveal visible crosstalk. If you try moving a small Window in front of the inversion pattern (above) which makes your screen flicker the most, you may well see crosstalk in the surrounding pattern. Different patterns are required to reveal crosstalk on different displays (depending on their inversion scheme).
Read more →
PhotoWorks (ray tracing software)

PhotoWorks is a raytrace rendering program created by Dassault Systèmes SolidWorks Corporation, formerly supplied as a photorealistic rendering add-in for SolidWorks. The program is based on the Mental Ray rendering engine. It has a library of scenes and materials that can be used with user-created SolidWorks files to create still frame images within the SolidWorks GUI. Since the 2011 release of SolidWorks, PhotoWorks has been replaced by the PhotoView 360 rendering utility. A 2010 review comparing PhotoWorks with three other rendering programs for SolidWorks (including PhotoView 360) gave the program high marks for render speed and built-in materials, but low marks for realism and user interface. Appearance File Type: .p2m
Read more →
Cumulus (software)

Cumulus is a digital asset management software designed for client/server system which is developed by Canto Software. The product makes use of metadata for indexing, organizing, and searching. == History == Cumulus was first released as a Macintosh application in 1992, and was named by Apple Computer as the "Most Innovative Product of 1992". Cumulus introduced search capabilities beyond those available in the Macintosh at the time, particularly relating to thumbnails. Cumulus 1.0 was a single-user product with no network capabilities. Among the main features of Cumulus 1.0, the search function automatically generated previews and contained support for the included AppleTalk – Peer-to-Peer – network. Cumulus 2.5 was available in five different languages and received the 1993 MacUser magazine Eddy award for "Best Publishing & Graphics Utility". In 1995, Canto introduced the scanner software "Cirrus" to focus on the development of Cumulus. Cumulus 3, released in 1996, introduced a server version for the first time and contained the possibility to spread files over the Internet via the "Web Publisher". Since Apple offered Cumulus 3 with its "Workgroup Server" as a bundle, Cumulus became one of the leading digital asset management systems. Cumulus 4 was the first version that was network-ready, and was available for Macintosh, Windows and UNIX operating systems allowing for cross-platform file sharing. Released in 1998, the support of Solaris was discounted later. Cumulus 5 modified the software core to use an open architecture providing an API to external systems and databases. The open architecture of Cumulus 5 also enabled a more functional bridge between Cumulus and the Internet. Cumulus 6 introduced Embedded Java Plugin (EJP) which allowed system integrators to build custom Java plug-ins in order to extend the functionality of the Cumulus client. Cumulus 6.5 marked the end of the Cumulus Single User Edition product, which was licensed to MediaDex for further development and distribution. Cumulus 7 was introduced summer of 2006. Cumulus 8 was released in June 2009, with new indexing capabilities taking advantage of multicore/multiprocessor systems, and ability to manage a wider variety of file formats. Cumulus 8.5 was released in May 2011. Support was added for multilingual metadata, sometimes referred to as "World Metadata." Cumulus Sites was updated to support metadata editing and file uploads. Cumulus 8.6 was released in July 2012, and contains an updated user interface for the administration of Cumulus Sites and additional features for web-based administration of Cumulus. Other additions include features for collaboration links, multi-language support and automated version control. Cumulus 9 was released in September 2013 and introduced a new Web Client User Interface and the Cumulus Video Cloud. The Cumulus Web Client UI was redesigned to provide users with a modern, easy-to-use interface to support and guide the user while addressing modern business needs. The Cumulus Video Cloud extends the Cumulus video handling capabilities to add conversion and global streaming. Cumulus 9 also saw the addition of upload collection links which allow external collaborators to drag and drop files directly into Cumulus without needing a Cumulus account. Cumulus 9.1 was released in May 2014 and introduced the Adobe Drive Adapter for Cumulus which allows users to browse and search digital assets in Cumulus directly from Adobe work environments such as Photoshop, InDesign, Illustrator, Premier and other Adobe applications. Cumulus 10 (Cumulus X) was released July 2015 and introduced two mobile-friendly products: the Cumulus app and Portals. The Cumulus app on iOS was designed to allow users to collaborate either on an iPhone or iPad. Portals is the read-only version of the Cumulus Web Client where users can work with assets that admins allow. Cumulus 10.1 was introduced in January 2016 and included the InDesign Client integration where users can work with Adobe InDesign while accessing their assets from Cumulus. Cumulus 10.2 was introduced in September 2016 and brought the Media Delivery Cloud using Amazon Web Services (AWS). It allows users to manage their media rendition in a single source and distribute media files globally across different channels and devices. Cumulus 10.2.3 was released in February 2017 and came with a "crop and customize photos" feature for Portals and the Web Client. == Product overview == The cataloging of the file via upload into the archive is where Cumulus transfers maximum information about the file from the metadata. For image or photo files, this is typically Exif and IPTC data. The metadata is mainly used to search the archive. The use of embargo data supports license management for copyrighted material. The managed files can be cataloged and their usage can be set. The indexing is based on a predefined taxonomy, which is governed by the internal rules of the organization or by industry standards. You can specify whether files can only be used for specific purposes or only by certain groups of people. The production management system includes version management for files. Via the publication function, the files can be distributed directly via links or e-mails. It's also possible to access from the outside via the Cumulus Portals web interface, which allows a read access to released content from the catalog. There are different variants, starting with the "Workgroup archive server" up to the "Enterprise Business Server" for large companies. Both server and client are extensible through a Java-based plug-in architecture. Since version 7.0, there is a web application based on Ajax with a separate user interface. For access to the Cumulus catalog on mobile, there has been an application for Apple devices based on iOS since 2010. == Miscellaneous == In 2015, Cumulus developer Canto established the first Canto digital asset management (DAM) event. The event is held annually in Berlin. The Henry Stewart team has been hosting DAM conferences since 2006.
Read more →
Automated parking system

An automated (car) parking system (APS) is a mechanical system designed to minimize the area and/or volume required for parking cars. Like a multi-story parking garage, an APS provides parking for cars on multiple levels stacked vertically to maximize the number of parking spaces while minimizing land usage. The APS, however, utilizes a mechanical system to transport cars to and from parking spaces (rather than the driver) in order to eliminate much of the space wasted in a multi-story parking garage. While a multi-story parking garage is similar to multiple parking lots stacked vertically, an APS is more similar to an automated storage and retrieval system for cars. Parking systems are generally powered by electric motors or hydraulic pumps that move vehicles into a storage position.The paternoster (shown animated at the right) is an example of one of the earliest and most common types of APS. APS are also generically known by a variety of other names, including:automated parking facility (APF), automated vehicle storage and retrieval system (AVSRS), car parking system, mechanical parking, and robotic parking garage. == History == The concept for the automated parking system was and is driven by two factors: a need for parking spaces and a scarcity of available land. The earliest use of an APS was in Paris, France in 1905 at the Garage Rue de Ponthieu. The APS consisted of a groundbreaking multi-story concrete structure with an internal car elevator to transport cars to upper levels where attendants parked the cars. In the 1920s, a Ferris wheel-like APS (for cars rather than people) called a paternoster system became popular as it could park eight cars in the ground space normally used for parking two cars. Mechanically simple with a small footprint, the paternoster was easy to use in many places, including inside buildings. At the same time, Kent Automatic Garages was installing APS with capacities exceeding 1,000 cars. The “ferris-wheel,” or paternoster system — was created by the Westinghouse Corporation in 1923 and subsequently built in 1932 on Chicago's Monroe Street. The Nash Motor Company created the first glass-enclosed version of this system for the Chicago Century of Progress Exhibition in 1933 The first driverless parking garage opened in 1951 in Washington, D.C., but was replaced with office space due to increasing land values. APS saw a spurt of interest in the U.S. in the late 1940s and 1950s with the Bowser, Pigeon Hole and Roto Park systems. In 1957, 74 Bowser, Pigeon Hole systems were installed, and some of these systems remain in operation. However, interest in APS in the U.S. waned due to frequent mechanical problems and long waiting times for patrons to retrieve their cars. In the United Kingdom, the Auto Stacker opened in 1961 in Woolwich, south east London, but proved equally difficult to operate. Interest in APS in the U.S. was renewed in the 1990s, and there were 25 major current and planned APS projects (representing nearly 6,000 parking spaces) in 2012. The first American robotic parking garage opened in 2002 in Hoboken, New Jersey. While interest in the APS in the U.S. languished until the 1990s, Europe, Asia and Central America had been installing more technically advanced APS since the 1970s. In the early 1990s, nearly 40,000 parking spaces were being built annually using the paternoster APS in Japan. In 2012, there are an estimated 1.6 million APS parking spaces in Japan. The ever-increasing scarcity of available urban land (urbanization) and increase of the number of cars in use (motorization) have combined with sustainability and other quality-of-life issues to renew interest in APS as alternatives to multi-storey car parks, on-street parking, and parking lots. == Largest systems == The largest Automated Parking Facility in the world is in Al Jahra, Kuwait, and provides 2,314 parking spaces. The world's fastest Automated Parking System is in Wolfsburg, Germany, with a retrieval time of 1 minute and 44 seconds. The largest APS in Europe is at Dokk1 in Aarhus, Denmark, and provides 1,000 parking spaces via 20 car lifts. == Space saving == All APS take advantage of a common concept to decrease the area of parking spaces - removing the driver and passengers from the car before it is parked. With either fully automated or semi-automated APS, the car is driven up to an entry point to the APS and the driver and passengers exit the car. The car is then moved automatically or semi-automatically (with some attendant action required) to its parking space. The space-saving provided by the APS, compared to the multi-story parking garage, is derived primarily from a significant reduction in space not directly related to the parking of the car: Parking space width and depth (and distances between parking spaces) are dramatically reduced since no allowance need be made for driving the car into the parking space or for the opening of car doors (for drivers and passengers) No driving lanes or ramps are needed to drive the car to/from the entrance/exit to a parking space Ceiling height is minimized since there is no pedestrian traffic (drivers and passengers) in the parking area, and No walkways, stairways or elevators are needed to accommodate pedestrians in the parking area. With the elimination of ramps, driving lanes, pedestrians and the reduction in ceiling heights, the APS requires substantially less structural material than the multi-story parking garage. Many APS utilize a steel framework (some use thin concrete slabs) rather than the monolithic concrete design of the multi-story parking garage. These factors contribute to an overall volume reduction and further space savings for the APS. == Other considerations == In addition to the space saving, many APS designs provide a number of secondary benefits: The parked cars and their contents are more secure since there is no public access to parked cars Minor parking lot damage such as scrapes and dents are eliminated Drivers and passengers are safer not having to walk through parking lots or garages Driving around in search of a parking space is eliminated, thereby reducing engine emissions and wasted time Only minimal ventilation and lighting systems are needed Handicap access is improved The volume and visual impact of the parking structure is minimized Shorter construction time === Problems === There have been a number of problems with robotic parking systems, particularly in the United States. The systems work well in balanced throughput situations like shopping malls and train stations, but they are unsuited to high peak volume applications like rush hour usage or stadiums and they suffer from technical problems. Further, parkers not familiar with the system may cause problems, for example by failing to push the button to alert a fully automated system to the presence of a car to be parked. In London around 40 vehicles were trapped for two years in CBRE's system. == Fully automated vs semi-automated == Fully automated parking systems operate much like robotic valet parking. The driver drives the car into an APS entry (transfer) area. The driver and all passengers exit the car. The driver uses an automated terminal nearby for payment and receipt of a ticket. When driver and passengers have left the entry area, the mechanical system lifts the car and transports it to a pre-determined parking space in the system. More sophisticated fully automated APS will obtain the dimensions of cars on entry in order to place them in the smallest available parking space. The driver retrieves a car by inserting a ticket or code into an automated terminal. The APS lifts the car from its parking space and delivers it to an exit area. Most often, the retrieved car has been oriented to eliminate the need for the driver to back out. Fully automated APS theoretically eliminate the need for parking attendants. Semi-automated APS also use a mechanical system of some type to move a car to its parking space, however putting the car into and/or the operation of the system requires some action by an attendant or the driver. The choice between fully and semi-automated APS is often a matter of space and cost, however large capacity (> 100 cars) tend to be fully automated. == Applications == By virtue of their relatively smaller volume and mechanized parking systems, APS are often used in locations where a multi-story parking garage would be too large, too costly or impractical. Examples of such applications include, under or inside existing or new structures, between existing structures and in irregularly shaped areas. APS can also be applied in situations similar to multi-storey parking garages such as freestanding above ground, under buildings above grade and under buildings below grade. == Costs == The direct comparison of costs between an APS and a multi-story parking garage can be complicated by many variables such as capacity, land costs, area shape, number and location of entranc
Read more →
Moving object detection

Moving object detection is a technique used in computer vision and image processing. Multiple consecutive frames from a video are compared by various methods to determine if any moving object is detected. Moving objects detection has been used for wide range of applications like video surveillance, activity recognition, road condition monitoring, airport safety, monitoring of protection along marine border, etc. == Definition == Moving object detection is to recognize the physical movement of an object in a given place or region. By acting segmentation among moving objects and stationary area or region, the moving objects' motion can be tracked and thus analyzed later. To achieve this, consider a video is a structure built upon single frames, moving object detection is to find the foreground moving target(s), either in each video frame or only when the moving target shows the first appearance in the video. == Traditional methods == Among all the traditional moving object detection methods, we could categorize them into four major approaches: Background subtraction, Frame differencing, Temporal Differencing, and Optical Flow. === Frame differencing === Instead of using traditional approach, to use image subtraction operator by subtracting second and images afterwards, the frame differencing method makes comparisons between two successive frames to detect moving targets. === Temporal differencing === The temporal differencing method identifies the moving object by applying pixel-wise difference method with two or three consecutive frames.
Read more →
Breakup Notifier

Breakup Notifier was a web application written by product developer and programmer Dan Loewenherz that enabled its registered users to track the relationship status of their Facebook friends. An email notification was sent to the user when one of their Facebook friends changed their relationship status. The app was one of the most viral Facebook app's at the time of its release. It was mentioned in a skit on The Jay Leno Show and news of its popularity was published in Time magazine, The New York Post, CNET, and The Globe and Mail. == Popularity and Facebook controversy == Breakup Notifier gathered 100,000 users in less than 24 hours of its launch and reached a user base of more than 3,000,000 in February 2011. Facebook then blocked the app. Loewenherz later created an app named Crush Notifier, which differs from the original app in that users can check if they have a mutual crush. Breakup Notifier was later unblocked by Facebook and monetized.
Read more →
Blackmagic Design

Blackmagic Design Pty Ltd is an Australian company that develops digital cinema technology and manufactures professional video production hardware and software. Headquartered in South Melbourne, it is known for producing high-end digital movie cameras and a range of broadcast and post-production equipment. The company also develops software applications, including the DaVinci Resolve application for non-linear video editing, color correction, color grading, visual effects, and audio post-production. == History == Blackmagic Design Pty Ltd was founded on 7 September 2001 by Grant Petty. Its first product, DeckLink, introduced in 2002, was a video capture card for macOS that supported uncompressed 10-bit video, marking a shift toward professional-grade yet affordable video workflows. Subsequent versions—including the DeckLink 2, Pro SDI, HD Plus, and Multibridge—added capabilities such as color correction, Windows support, and compatibility with major editing software like Adobe Premiere Pro, to broaden the product's appeal. At the 2012 NAB Show, Blackmagic announced its first Cinema Camera, a digital movie camera. Blackmagic made several acquisitions over the next decade. In 2009, it acquired da Vinci Systems, known for its color-grading tools. In 2010, it acquired Echolab's ATEM switcher line, in 2014, it added eyeon Software (developer of the Blackmagic Fusion compositing software) and London's Cintel (film scanning and restoration), and in 2016, it acquired Fairlight, an audio technology company known for its CMI synthesizers as well as mixing consoles. == Products == List of all products developed by the company. Editing, Color Correction and Audio Post Production DaVinci Resolve (free version) and DaVinci Resolve Studio (paid version), computer software for non-linear video editing, color correction, color grading, visual effects, and audio post-production. Audio/Video Controller Consoles: Editor Keyboard, Speed Editor, DaVinci Resolve Replay Editor, Micro Panel, Mini Panel, DaVinci Resolve Micro Color Panel, Advanced Panel, Fairlight Console Channel Fader, Fairlight Console Channel Control, Fairlight Console LCD Monitor, Fairlight Console Audio Editor, Fairlight Desktop Audio Editor, Fairlight Desktop Console, Fairlight Audio Interface Cintel Film Scanner (Generations 1-3) Live Production Home Streaming: ATEM Mini, ATEM Mini Pro/ISO, ATEM Mini Extreme, ATEM Mini Extreme ISO (The ATEM Mini series has both HDMI and SDI variants) Production Switchers: ATEM 1,2 & 4 M/E Constellation HD, ATEM 1,2 & 4 M/E Constellation 4K, ATEM Constellation 8K, ATEM 1,2 & 4 M/E Production Studio 4K, ATEM Television Studio HD8 & HD8 ISO Switcher & Camera Controllers: ATEM Camera Control Panel, ATEM 1 M/E Advanced Panel, ATEM 2 M/E Advanced Panel, ATEM 4 M/E Advanced Panel Chroma Keyers: Ultimatte 12 HD Mini, Ultimatte 12 HD, Ultimatte 12 4K, Ultimatte 12 8K Recording and Storage: HyperDeck Studio HD Mini, HyperDeck Studio HD Plus, HyperDeck Studio HD Plus, HyperDeck Studio 4K Pro, HyperDeck Extreme 8K HDR, HyperDeck Extreme 4K HDR, HyperDeck Extreme Control, HyperDeck Shuttle HD, Duplicator 4K, MultiDock 10G, Video Assist 7" 12G HDR, Video Assist 5" 12G HDR Capture and Playback UltraStudio: 3G, HD Mini, 4K Mini, 4K Extreme 3 DeckLink (PCIe cards): Mini Recorder, Mini Monitor, Mini Monitor 4K, Mini Recorder 4K, Duo 2 Mini, Duo 2, Quad 2, SDI 4K, Studio 4K, 4K Extreme 12G, 8K Pro, Quad HDMI Recorder Network Storage Cloud Store Cloud Pod Broadcast Converters Micro Converter: BiDirectional SDI/HDMI 3G wPSU, HDMI to SDI 3G wPSU, SDI to HDMI 3G wPSU, BiDirectional SDI/HDMI 3G, HDMI to SDI 3G, SDI to HDMI 3G Mini Converters: Audio to SDI, Optical Fiber 12G, SDI Multiplex 4K, Quad SDI to HDMI 4K, SDI Distribution 4K, SDI to Analog 4K, Audio to SDI 4K, SDI to Audio 4K, HDMI to SDI 6G, SDI to HDMI 6G Teranex Mini: SDI Distribution 12G, SDI to HDMI 12G, Audio to SDI 12G, SDI to Analog 12G, SDI to HDMI 8K HDR, SDI to DisplayPort 8K HDR 2110 IP Converters Routing and Distribution Videohub
Read more →
Non-separable wavelet

Non-separable wavelets are multi-dimensional wavelets that are not directly implemented as tensor products of wavelets on some lower-dimensional space. They have been studied since 1992. They offer a few important advantages. Notably, using non-separable filters leads to more parameters in design, and consequently better filters. The main difference, when compared to the one-dimensional wavelets, is that multi-dimensional sampling requires the use of lattices (e.g., the quincunx lattice). The wavelet filters themselves can be separable or non-separable regardless of the sampling lattice. Thus, in some cases, the non-separable wavelets can be implemented in a separable fashion. Unlike separable wavelet, the non-separable wavelets are capable of detecting structures that are not only horizontal, vertical or diagonal (show less anisotropy). == Examples == Red-black wavelets Contourlets Shearlets Directionlets Steerable pyramids Non-separable schemes for tensor-product wavelets
Read more →
Gapo

Gapo is a Vietnamese social networking service based in Hanoi, Vietnam. Users are able to create a personal profile and share text, photos and videos with others on the platform. Users can also use Gapo for live streaming, instant messaging, blogging, and online payments. Gapo was launched in July 2019 by Hà Trung Kiên and Duong Vi Khoa. == History == Gapo was founded in response to calls for Vietnam's Communist-led government to produce a domestic alternative to social media giants like Facebook and Google. Gapo officially launched on July 23, 2019 at an event in Hanoi. The company received 500 billion đồng (US$22 million) in funding from technology corporation G-Group to be utilized in the first phase of development. They also partnered with Sony Music Entertainment to provide music content to its services. == Features == Gapo features a news feed for posting content, livestreaming, instant messaging, and blogging. It also allows users to pay online and access public services. == Reception == Within two days of launch, Gapo received about 200,000 registrations. By September 2019, the user base increased to one million. Upon launch, Gapo experienced significant technical difficulties. Users complained about the inability to sign up for a new account and said that certain functions were not available for use at launch. This issue caused Gapo to temporarily suspend their services in order to perform upgrades and bug fixes. Gapo relaunched the next day, though many users reported that the access speed decreased. The mobile app also received mixed reviews from users in both the App Store and the Google Play Store, with an average rating of 3.1 and 3.5, respectively. Most users found the app to be a knockoff of Facebook, although some users praised the app for being locally developed. === Expert opinions on platform viability === Le Hong Hiep of the ISEAS - Yusof Ishak Institute was doubtful that a Vietnamese-owned social network service could be as powerful as a foreign-based service, stating that Vietnam might not be able to develop a viable social media network to compete with the likes of Facebook or Google. Others, like blogger Ann Chi, said that, due to local players complying with local censorship policy, there is a chance that locals might not trust Gapo and other local services in light of possible surveillance. Regarding the targeted user base figure for the end of 2019 and 2021, experts cautioned that the company might need an additional trillion đồng of funding to reach its planned user base targets. In response, the company stated that Gapo was never meant to compete with Facebook, but instead noted that the main difference between Gapo and Facebook is that Gapo provides a personalized user experience through customization. == Censorship == Gapo has the right to censor posts and news that are deemed offensive and inaccurate by users or not approved by the censorship curators.
Read more →