AI Data Quality Tools

AI Data Quality Tools — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Local-first software

  Local-first software is a software engineering approach in which an application stores its data primarily on the user's own device rather than on remote servers. Users can read and write data without an Internet connection, and changes are synchronized across devices in the background when connectivity is available. The approach differs from conventional cloud-based applications, where the server holds the authoritative copy of user data and the client acts as a thin client. The term was coined in a 2019 paper published by researchers at Ink & Switch, an independent research lab, and presented at the Onward! conference at ACM SIGPLAN. The paper, sometimes referred to as a manifesto, was authored by Martin Kleppmann, Adam Wiggins, Peter van Hardenberg, and Mark McGranaghan. == Background == Before the widespread adoption of Internet-connected software in the 2000s, most desktop applications stored data as files on the user's local disk. Users had direct access to their files and could copy, back up, or delete them at will. The rise of software as a service (SaaS) and cloud-based applications like Google Docs shifted data storage to centralized servers. While cloud applications made real-time collaboration across devices straightforward, they introduced a dependency on the service provider: if the provider discontinued the service or experienced an outage, users could lose access to their data. A related concept, "offline-first," emerged in the early 2010s and focused on making web applications resilient to network interruptions. The local-first approach built on these earlier efforts while placing greater emphasis on long-term data ownership and end-to-end encryption. == Origins == === Ink & Switch manifesto === Ink & Switch is an industrial research lab co-founded by Adam Wiggins, who had earlier co-founded Heroku. Martin Kleppmann, an associate professor in the Department of Computer Science and Technology at the University of Cambridge, was a co-author of the 2019 paper. The manifesto proposed seven "ideals" for local-first software: Fast — Operations respond without network round-trips. Multi-device — Data synchronizes across a user's devices. Offline — Users can read and write data without a network connection. Collaboration — Multiple users can work on the same data concurrently. Longevity — Data remains accessible even if the software vendor ceases operation. Privacy — End-to-end encryption protects user data. User control — The vendor cannot restrict how users access or use their data. The paper surveyed existing approaches to data storage and collaboration — ranging from email attachments and Dropbox-style file synchronization to web applications and mobile backends — and argued that none of them satisfied all seven ideals simultaneously. === Role of CRDTs === The manifesto identified conflict-free replicated data types (CRDTs) as a promising technical foundation for local-first applications. CRDTs are data structures that allow multiple replicas to be edited independently and then merged without conflicts, a property first formalized in research by Marc Shapiro and colleagues around 2011. Kleppmann and collaborators at Ink & Switch developed Automerge, an open-source CRDT library for JSON documents, to make these algorithms available to application developers. == Adoption and community == Developer interest in the local-first approach grew after the 2019 paper spread on Hacker News and at developer conferences In August 2023, Wired published a feature article on the movement, describing it as an effort to reduce reliance on large cloud providers. The first Local-First Conf took place on 30 May 2024 in Berlin, with talks by Kleppmann and developers from companies including Linear and Anytype. The community has continued to expand, with regular "LoFi" meetups, a podcast (localfirst.fm), and a third edition of the conference planned for Berlin in July 2026. == Criticisms and limitations == Developers and commentators have pointed out practical difficulties with the local-first approach. Synchronizing data between multiple devices that may be offline for extended periods introduces complexity that cloud-based architectures avoid. Conflict resolution, even with CRDTs, can produce results that are technically consistent but semantically unexpected to users. Schema migrations across thousands of client devices running different application versions pose another difficulty that does not arise with server-side databases. Web browsers impose storage limits and may evict locally stored data. Safari, for instance, has been reported to clear IndexedDB data after seven days of inactivity on a given site, which undermines the assumption that local data is persistent. There is also disagreement within the local-first community about whether a fully decentralized architecture is required. The original manifesto described decentralization as the "logical end goal," but a number of products that identify as local-first still depend on centralized servers for authentication, backup, or synchronization. In a talk at Local-First Conf 2024, Kleppmann said the seven ideals are better understood as a "gradient" rather than a strict checklist.

  Read more →
• 

  List of network buses

  List of electrical characteristics of single collision domain segment "slow speed" network buses: The number of nodes can be limited by either number of available addresses or bus capacitance. None of the above use any analog domain modulation techniques like MLT-3 encoding, PAM-5 etc. PSI5 designed with automation applications in mind is a bit unusual in that it uses Manchester code.

  Read more →
• 

  Superincreasing sequence

  In mathematics, a sequence of positive real numbers ( s 1 , s 2 , . . . ) {\displaystyle (s_{1},s_{2},...)} is called superincreasing if every element of the sequence is greater than the sum of all previous elements in the sequence. Formally, this condition can be written as s n + 1 > ∑ j = 1 n s j {\displaystyle s_{n+1}>\sum _{j=1}^{n}s_{j}} for all n ≥ 1. == Program == The following Python source code tests a sequence of numbers to determine if it is superincreasing: This produces the following output: Sum: 0 Element: 1 Sum: 1 Element: 3 Sum: 4 Element: 6 Sum: 10 Element: 13 Sum: 23 Element: 27 Sum: 50 Element: 52 Is it a superincreasing sequence? True == Examples == (1, 3, 6, 13, 27, 52) is a superincreasing sequence, but (1, 3, 4, 9, 15, 25) is not. The series a^x for a>=2 == Properties == Multiplying a superincreasing sequence by a positive real constant keeps it superincreasing.

  Read more →
• 

  Polygraphic substitution

  Polygraphic substitution is a substitution cipher in which a uniform substitution is performed on blocks of letters. When the length of the block is specifically known, more precise terms are used: for instance, a cipher in which pairs of letters are substituted is bigraphic. As a concept, polygraphic substitution contrasts with monoalphabetic (or simple) substitutions in which individual letters are uniformly substituted, or polyalphabetic substitutions in which individual letters are substituted in different ways depending on their position in the text. In theory, there is some overlap in these definitions; one could conceivably consider a Vigenère cipher with an eight-letter key to be an octographic substitution. In practice, this is not a useful observation since it is far more fruitful to consider it to be a polyalphabetic substitution cipher. == Specific ciphers == In 1563, Giambattista della Porta devised the first bigraphic substitution. However, it was nothing more than a matrix of symbols. In practice, it would have been all but impossible to memorize, and carrying around the table would lead to risks of falling into enemy hands. In 1854, Charles Wheatstone came up with the Playfair cipher, a keyword-based system that could be performed on paper in the field. This was followed up over the next fifty years with the closely related four-square and two-square ciphers, which are slightly more cumbersome but offer slightly better security. In 1929, Lester S. Hill developed the Hill cipher, which uses matrix algebra to encrypt blocks of any desired length. However, encryption is very difficult to perform by hand for any sufficiently large block size, although it has been implemented by machine or computer. This is therefore on the frontier between classical and modern cryptography. == Cryptanalysis of general polygraphic substitutions == Polygraphic systems do provide a significant improvement in security over monoalphabetic substitutions. Given an individual letter 'E' in a message, it could be encrypted using any of 52 instructions depending on its location and neighbors, which can be used to great advantage to mask the frequency of individual letters. However, the security boost is limited; while it generally requires a larger sample of text to crack, it can still be done by hand. One can identify a polygraphically-encrypted text by performing a frequency chart of polygrams and not merely of individual letters. These can be compared to the frequency of plaintext English. The distribution of digrams is even more stark than individual letters. For example, the six most common letters in English (23%) represent approximately half of English plaintext, but it takes only the most frequent 8% of the 676 digrams to achieve the same potency. In addition, even in a plaintext many thousands of characters long, one would expect that nearly half of the digrams would not occur, or only barely. In addition, looking over the text one would expect to see a fairly regular scattering of repeated text in multiples of the block length and relatively few that are not multiples. Cracking a code identified as polygraphic is similar to cracking a general monoalphabetic substitution except with a larger 'alphabet'. One identifies the most frequent polygrams, experiments with replacing them with common plaintext polygrams, and attempts to build up common words, phrases, and finally meaning. Naturally, if the investigation led the cryptanalyst to suspect that a code was of a specific type, like a Playfair or order-2 Hill cipher, then they could use a more specific attack.

  Read more →
• 

  Coda (document editor)

  Coda is a cloud-based multi-user document editor. == Features == Coda is a document editor that provides features from spreadsheets, presentation documents, word processor files, and apps. Possible uses for Coda documents include using them as a wiki, database, or project management tool. Coda has built a formula system, much like spreadsheets commonly have, but in Coda documents, formulas can be used anywhere within the document, and can link to things that aren't just cells, including other documents, calendars or graphs. Coda also has the ability to integrate with custom third-party services, and has automations. It has offered $1 million in grants for developers that create such integrations. == Development == Coda Project, Inc. was founded by Shishir Mehrotra and Alex DeNeui in June 2014. Having met at MIT, they developed the project mostly privately before announcing a public beta in October 2017. The company was named Coda, which is an anadrome for “a doc”. Coda raised $60 million in venture capital funding over two rounds by 2017. The Coda software came out of beta in February 2019. Version 1.0 had an improved user interface, new features for folders and workspaces, and permission levels for accessing files. Coda raised another $80 million in 2020, and $100 million in 2021. The 2021 funding brought Coda's valuation to $1.4 billion, making it a unicorn. In December 2024, Coda was acquired by Grammarly in an all-stock deal for an undisclosed amount. In October 2025, Grammarly rebranded as Superhuman, incorporating Coda as a core product within the new Superhuman productivity suite alongside Grammarly's writing tools, Superhuman Mail, and a new AI assistant called Superhuman Go.

  Read more →
• 

  KLJN Secure Key Exchange

  Random-resistor-random-temperature Kirchhoff-law-Johnson-noise key exchange, also known as RRRT-KLJN or simply KLJN, is an approach for distributing cryptographic keys between two parties that claims to offer unconditional security. This claim, which has been contested, is significant, as the only other key exchange approach claiming to offer unconditional security is Quantum key distribution. The KLJN secure key exchange scheme was proposed in 2005 by Laszlo Kish and Granqvist. It has the advantage over quantum key distribution in that it can be performed over a metallic wire with just four resistors, two noise generators, and four voltage measuring devices---equipment that is low-priced and can be readily manufactured. It has the disadvantage that several attacks against KLJN have been identified which must be defended against. "Given that the amount of effort and funding that goes into Quantum Cryptography is substantial (some even mock it as a distraction from the ultimate prize which is quantum computing), it seems to me that the fact that classic thermodynamic resources allow for similar inherent security should give one pause," wrote Henning Dekant, the founder of the Quantum Computing Meetup, in April 2013. The Cybersecurity Curricula 2017, a joint project of the Association for Computing Machinery, the IEEE Computer Society, the Association for Information Systems, and the International Federation for Information Processing Technical Committee on Information Security Education (IFIP WG 11.8) recommends teaching the KLJN Scheme as part of teaching "Advanced concepts" in its knowledge unit on cryptography. == See Also/Further Reading ==

  Read more →
• 

  Social television

  Social television is the union of television and social media. Millions of people now share their TV experience with other viewers on social media such as Twitter and Facebook using smartphones and tablets. TV networks and rights holders are increasingly sharing video clips on social platforms to monetise engagement and drive tune-in. The social TV market covers the technologies that support communication and social interaction around TV as well as companies that study television-related social behavior and measure social media activities tied to specific TV broadcasts – many of which have attracted significant investment from established media and technology companies. The market is also seeing numerous tie-ups between broadcasters and social networking players such as Twitter and Facebook. The market is expected to be worth $256bn by 2017. Social TV was named one of the 10 most important emerging technologies by the MIT Technology Review on Social TV in 2010. And in 2011, David Rowan, the editor of Wired magazine, named Social TV at number three of six in his peek into 2011 and what tech trends to expect to get traction. Ynon Kreiz, CEO of the Endemol Group told the audience at the Digital Life Design (DLD) conference in January 2011: "Everyone says that social television will be big. I think it's not going to be big—it's going to be huge". Much of the investment in the earlier years of social TV went into standalone social TV apps. The industry believed these apps would provide an appealing and complimentary consumer experience which could then be monetized with ads. These apps featured TV listings, check-ins, stickers and synchronised second-screen content but struggled to attract users away from Twitter and Facebook. Most of these companies have since gone out of business or been acquired amid a wave of consolidation and the market has instead focused on the activities of the social media channels themselves – such as Twitter Amplify, Facebook Suggested Videos and Snapchat Discover – and the technologies that support them. == Twitter == Twitter and Facebook are both helping users connect around media, which can provoke strong debate and engagement. Both social platforms want to be the 'digital watercooler' and host conversation around TV because the engagement and data about what media people consume can then be used to generate advertising revenue. As an open platform, conversation on Twitter is closely aligned with real-time events. In May 2013, it launched Twitter Amplify – an advertising product for media and consumer brands. With Amplify, Twitter runs video highlights from major live broadcasts, with advertisers' names and messages playing before the clip. By February 2014, all four major U.S. TV networks had signed up to the Amplify program, bringing a variety of premium TV content onto the social platform in the form of in-tweet real-time video clips. In June 2014, Twitter acquired its Twitter Amplify partner in the U.S. SnappyTV, a company that was helping broadcasters and rights holders to share video content both organically across social and via Twitter's Amplify program. Twitter continues to rely on Grabyo, which has also struck numerous deals with some of the largest broadcasters and rights holders in Europe and North America to share video content across Facebook and Twitter. == Facebook == Facebook made significant changes to its platform in 2014 including updates to its algorithm to enhance how it serves video in users' feeds. It also launched video autoplay to get users to watch the videos in their feeds. It rapidly surpassed Twitter and by the end of 2014 it was enjoying three billion video views a day on its platform and had announced a partnership with the NFL, one of Twitter's most active Twitter Amplify partners. In April 2015, at its F8 Developer Conference, it revealed it was working with Grabyo among other technology partners to bring video onto its platform. Then in July it announced it would be launching Facebook Suggested Videos, bringing related videos and ads to anyone that clicks on a video – a move that not only competed with Twitter's commercial video offering but also put it in direct competition with YouTube. == TV Time == TV Time is a television dedicated social network that allows users to keep track of the television series they watch, as well as films. It also allows them to express their reaction to the media they have seen with episode specific voting for favorite characters and emotional reaction to episodes, as well as commenting in episode restrictive pages. This way users are able to avoid spoilers while also finding a precise audience and community for each of their interactions, as opposed to bigger, non-television dedicated social medias such as Facebook and Twitter where the likelihood of unintentionally reading spoilers is much higher. TV Time offers an analytics service called "TVLytics" where the votes and reactions collected from users can be studied for research and television production purposes. == Advertising == According to Businessinsider.com, there are variety of applications for social TV, including support for TV ad sales, optimizing TV ad buys, making ad buys more efficient, as a complement to audience measurement, and eventually, audience forecasting and real-time optimization. Social TV data can ease access to focus groups and may create a positive feedback loop for generating ultra-sticky TV programming and multi-screen ad campaigns. == In numbers == Viewers share their TV experience on social media in real-time as events unfold: between 88-100m Facebook users login to the platform during the primetime hours of 8pm – 11pm in the US. The volume of social media engagement in TV is also rising – according to Nielsen SocialGuide, there was a 38% increase in tweets about TV in 2013 to 263m. For the 2014 Super Bowl, Twitter reported that a record 24.9 million tweets about the game were sent during the telecast, peaking at 381,605 tweets per minute. Facebook reported that 50 million people discussed the Super Bowl, generating 185 million interactions. The 2014 Oscars generated 5m tweets, viewed by an audience of 37m unique Twitter users and delivering 3.3bn impressions globally as conversation and key moments were shared virally across the platform. In 2014 the All England Lawn Tennis Club (AELTC), hosts of Wimbledon, used Grabyo to share video content across social. The videos were viewed 3.5 million times across Facebook and Twitter. In partnered with Grabyo again in 2015 and the videos generated over 48 million views across Facebook and Twitter. == Television shows with social integration == Here are some examples of how TV executives are integrating social elements with TV shows: C-SPAN streamed tweets from US Senators and Representatives during the quorum call The Voice had the judges of the program tweet during the show and the posts scrolls on the bottom of the screen. The use of Twitter also led to an increase in viewers. "Glee" Entertainment Weekly created a second screen viewing platform for the Glee season 3 premiere. == Related publications == Erika Jonietz. "Making TV Social, Virtually" MIT Technology Review. (January 11, 2010) AmigoTV (Alcatel-Lucent; Coppens et al.) – 2004 www.ist-ipmedianet.org/Alcatel_EuroiTV2004_AmigoTV_short_paper_S4-2.pdf Nextream (MIT Media Lab, Martin et al.) – 2010 Social Interactive Television: Immersive Shared Experiences and Perspectives (P. Cesar, D. Geerts, and K. Chorianopoulos (eds.)) – 2009 Social TV and the Emergence of Interactive TV – Multimedia Research Group – November 2010 Interactive Social TV on Service Oriented Environments: Challenges and Enablers (May 2011) == Systems == Boxee – acquired by Samsung GetGlue – acquired by i.TV Grabyo KIT digital Miso TV Tank Top TV WiO Xbox Live

  Read more →
• 

  Air Force Network

  Air Force Network (AFNet) is an Indian Air Force (IAF) owned, operated and managed digital information grid. The AFNet replaces the Indian Air Force's (IAF) old communication network set-up using the tropo-scatter technology of the 1950s making it a true net-centric combat force. The IAF project is part of the overall mission to network all three services; The Indian Army, The Indian Navy and The Indian Air Force. The former Defence Minister AK Antony inaugurated the IAF's the AFNET on 14 September 2010 dedicating it to the people of India, for their direct or indirect participation in the communication revolution. == Background == Armed Forces in India has been using troposcatters as primary means of military communications since the 1950s, thereby occupying huge and expensive 2G and 3G spectrums which otherwise could have been used for expanding and de-clogging the civilian wireless communication network. The rapid expansion of civilian mobile telephony leading to need for larger bandwidth for wireless communication and commercial need to operate the 3G network necessitated the Government of India to have the Indian Armed Forces vacate the spectrum occupied by them. Thus the government of India through Department of Telecommunication (DoT) started a project called "Network for Spectrum" to set up a fiber optics network for the exclusive use of Indian Armed Forces in exchange for spectrum being released by the Defence Forces. The aim of 'Network for Spectrum' being twofold - to facilitate the growth of national tele-density on the one hand, and ensuring modernization of defence communications with the state-of-the-art communication infrastructure, and to support net-centric military operations. The Department of Telecom and the Ministry of Defence signed the memorandum of understanding for vacating the spectrum and setting up dedicated network for the use of defence forces. In this MoU, DoT agreed to laying of 40,000 route kilometres of optical fibre cable connecting 219 Army stations, 33 Navy stations and 162 points for the Air Force. It further agreed to setting up an exclusive defence band and Defence Interest Zone along 100 km of the international border, where spectrum will be reserved only for use by the Armed Forces. The total cost of implementing "Network for Spectrum" project is estimated to be ₹ 10,000 crores. AFNet is Indian Air Force component of Digital Information Grid under "Network for Spectrum" project and the AFNet has been extended and connected to the Digital Information Grid Project under implementation for the Indian Navy and the Indian Army on 2015. == Project Origin == The Air Force Network (AFNet) had been developed by the Indian Air Force at a cost of ₹1,077 crore (US$235.53 million) in collaboration with HCL Technologies and Bharat Sanchar Nigam Limited. It will replace the Air Force's more than half-a-century-old telecom network. This project is part of the defence ministry's initiative to digitize the communication systems of the three armed forces under "Network for Spectrum" initiative to improve coordination among themselves and other Military and Strategic Institution. IAF was the first to complete this gigabyte digital information grid implemented under the AFNet project. AFNet will be connected and extended to a Unified Digital Grid encompassing all the legs of Indian Armed Forces. The then defence minister, A. K. Antony, inaugurated the AFNet, IAF's gigabyte digital information grid. The grid is aimed at improving the network-centric warfare capability of the Air Force. The event also saw the presence of other personalities including the then Minister of Communication & IT, A. Raja; the Marshal of the Air Force, Arjan Singh; the Chief of the Air Staff, the Chief of the Army Staff and other officials from the three services and members of the Industry. The event also featured a practice interception of a simulated aerial target by a MiG-29 which took off from an airbase in the Punjab sector using the AFNet capabilities. Further capabilities in line with network centric warfare were also demonstrated. This included sharing information, videos and pictures by operational assets and platforms like UAVs and AWACS to decision-makers who are several hundred kilometres apart. == Technology, Design & Structure == AFNet incorporates the latest traffic transportation technology in form of Internet Protocol (IP) packets over the network using Multiprotocol Label Switching (MPLS). A large Voice over Internet Protocol (VoIP) layer with stringent quality of service enforcement will facilitate robust, high quality voice, video and conferencing solutions. AFNet will prove to be an effective force multiplier for intelligence analysis, mission planning and control, post-mission feedback and related activities like maintenance, logistics and administration. A comprehensive design with multi-layer security precautions for “Defence in Depth” have been planned by incorporating encryption technologies, Intrusion Prevention Systems to ensure the resistance of the IT system against information manipulation and eavesdropping. The network is secured with a host of advanced state-of-the-art encryption technologies. It is designed for high reliability with redundancy built into the network design itself. The AFNet is also capable of transmitting video from unmanned surveillance aircraft (UAV), pictures from airborne warning and control systems (AWACS) to decision makers on the ground and providing intelligence inputs from remote areas. The AFNet is also expected to facilitate accelerated economic growth by providing radio frequency spectrum for telecommunication purposes. AFNET will be the largest Multi-protocol Label Switching (MPLS) network in the defence segment. == Demonstration == At the AFNet launch, the IAF showcased a practice interception of simulated enemy targets by a pair of Mig-29 fighter aircraft airborne from an advanced airbase in the Punjab sector using the gigabyte digital information grid. During the AFNet-assisted operations, the Indian fighter jets neutralised intruding targets in the western sector, which was played out live on the giant screens at the Air Force auditorium offering a glimpse of the harnessed potential of the system. The final orders for engaging the enemy targets were issued live by Antony, whose queries about how the operation went were responded to by the pilot as "excellent". Various other functionalities contributing towards Network Centric Warfare were also showcased. These consisted of facilitating video from Unmanned Aerial Vehicle (UAV), pictures from an AWACS aircraft to the decision-makers on ground sitting hundreds of kilometres away, providing intelligence inputs from far-flung areas at central locations seamlessly. This was possible mainly because of the robust networking platform provided by AFNet. == Integrated Air Command and Control System == Integrated Air Command and Control System (IACCS) is an automated command and control system for air defence operated by the Indian Air Force. IACCS operations rides the AFNET backbone integrating all ground-based and airborne sensors, air defense weapon systems and command and control (C2) nodes. Subsequent integration with other services networks and civil radars will provide an integrated Air Situation Picture to operators to carry out AD role. The project was envisaged in 1995 following the Purulia arms drop case and was a part of IAF’s first Air Power Doctrinal manual issued in the 2000s, later revised in 2022. The first node in the western sectors had been operationalised by September 2010. The first five nodes located in the western and south western sectors were commissioned in 2011. The Air Force was preparing to seek clearance for five further nodes which would cover the rest of the nation including the island territories. Through the IACCS, IAF will connect all of its space, air and ground assets quickly, for total awareness of a region. This will offer connectivity for all the ground platforms and airborne platforms (including AEW&C), as a part of the network centricity of IAF. The IACCS also facilitates real-time transport of images, data and voice, amongst satellites, aircraft and ground stations. By 2018, five IACCS nodes had been established including Barnala (Punjab), Wadsar (Gujarat), Aya Nagar (Delhi), Jodhpur (Rajasthan) and Ambala (Haryana). Following this, under Phase-II, 4 additional nodes and 10 sub-nodes are to be set up. The major nodes will be established in the Eastern, Central, Southern and Andaman and Nicobar sectors. The second phase will cost ₹8,000 crore (equivalent to ₹110 billion or US$1.1 billion in 2023). IACCS successfully integrated all operating radars, including its own, the Army's, and civilian ones, in 2023. This enabled the autonomous firing response capability to take down incoming missiles, aircraft, and UAVs. The Akashteer system of the Indian Army is being integrated with the IACCS

  Read more →
• 

  PenTile matrix family

  PenTile matrix is a family of patented subpixel matrix schemes used in electronic device displays. PenTile is a trademark of Samsung. PenTile matrices are used in AMOLED and LCD displays. These subpixel layouts are specifically designed to operate with proprietary algorithms for subpixel rendering embedded in the display driver, allowing plug and play compatibility with conventional RGB (Red-Green-Blue) stripe panels. == Overview == "PenTile Matrix" (a neologism from penta-, meaning "five" in Greek and tile) describes the geometric layout of the prototypical subpixel arrangement developed in the early 1990s. The layout consists of a quincunx comprising two red subpixels, two green subpixels, and one central blue subpixel in each unit cell. It was inspired by biomimicry of the human retina, which has nearly equal numbers of L and M type cone cells, but significantly fewer S cones. As the S cones are primarily responsible for perceiving blue colors, which do not appreciably affect the perception of luminance, reducing the number of blue subpixels with respect to the red and green subpixels in a display does not reduce the image quality. However, the layout may cause color leakage image distortion, which can be reduced by filters. In some cases the layout causes reduced moiré and blockiness compared to conventional RGB layouts. The PenTile layout is specifically designed to work with and be dependent upon subpixel rendering that uses only one and a quarter subpixel per pixel, on average, to render an image. That is, that any given input pixel is mapped to either a red-centered logical pixel, or a green-centered logical pixel. === History === PenTile was invented by Candice H. Brown Elliott, for which she was awarded the Society for Information Display's Otto Schade Prize in 2014. The technology was licensed by the company Clairvoyante from 2000 until 2008, during which time several prototype PenTile displays were developed by a number of Asian liquid crystal display (LCD) manufacturers. In March 2008, Samsung Electronics acquired Clairvoyante's PenTile IP assets. Samsung then funded a new company, Nouvoyance, Inc. to continue development of the PenTile technology. == PenTile RGBG == PenTile RGBG layout used in AMOLED and plasma displays uses green pixels interleaved with alternating red and blue pixels. The human eye is most sensitive to green, especially for high resolution luminance information. The green subpixels are mapped to input pixels on a one-to-one basis. The red and blue subpixels are subsampled, reconstructing the chroma signal at a lower resolution. The luminance signal is processed using adaptive subpixel rendering filters to optimize reconstruction of high spatial frequencies from the input image, wherein the green subpixels provide the majority of the reconstruction. The red and blue subpixels are capable of reconstructing the horizontal and vertical spatial frequencies, but not the highest of the diagonal. Diagonal high spatial frequency information in the red and blue channels of the input image are transferred to the green subpixels for image reconstruction. Thus the RG-BG scheme creates a color display with one third fewer subpixels than a traditional RGB-RGB scheme but with the same measured luminance display resolution. This is similar to the Bayer filter commonly used in digital cameras. === Devices === As of 2021, "almost all" OLED screens in portable consumer devices use some form of Pentile subpixel layout. == PenTile RGBW == PenTile RGBW technology, used in LCD, adds an extra subpixel to the traditional red, green and blue subpixels that is a clear area without color filtering material and with the only purpose of letting backlight come through, hence W for white. This makes it possible to produce a brighter image compared to an RGB-matrix while using the same amount of power, or produce an equally bright image while using less power. The PenTile RGBW layout uses each red, green, blue and white subpixel to present high-resolution luminance information to the human eyes' red-sensing and green-sensing cone cells, while using the combined effect of all the color subpixels to present lower-resolution chroma (color) information to all three cone cell types. Combined, this optimizes the match of display technology to the biological mechanisms of human vision. The layout uses one third fewer subpixels for the same resolution as the RGB stripe (RGB-RGB) layout, in spite of having four color primaries instead of the conventional three, using subpixel rendering combined with metamer rendering. Metamer rendering optimizes the energy distribution between the white subpixel and the combined red, green, and blue subpixels: W <> RGB, to improve image sharpness. The display driver chip has an RGB to RGBW color vector space converter and gamut mapping algorithm, followed by metamer and subpixel rendering algorithms. In order to maintain saturated color quality, to avoid simultaneous contrast error between saturated colors and peak white brightness, while simultaneously reducing backlight power requirements, the display backlight brightness is under control of the PenTile driver engine. When the image is mostly desaturated colors, those near white or grey, the backlight brightness is significantly reduced, often to less than 50% peak, while the LCD levels are increased to compensate. When the image has very bright saturated colors, the backlight brightness is maintained at higher levels. The PenTile RGBW also has an optional high-brightness mode that doubles the brightness of the desaturated color image areas, such as black-and-white text, for improved outdoor viewability. === Devices === Motorola MC65 Motorola ES55 Motorola ES400 Motorola Atrix 4G Samsung Galaxy Note 10.1 2014 version Lenovo Yoga 2 Pro Lenovo Yoga 3 Pro HP ENVY TouchSmart 14-k022tx Sleekbook MSI GS60 Ghost Pro 4K Lenovo IdeaPad Y50 4K Asus ZenBook UX303LN 4K Asus ZenBook Pro UX501JW LG UH7500/6500/6100 LG ThinQ G7/G7+ Oculus Quest 1 == Controversy == An ongoing controversy regarding the definition or measurement of resolution of color subpixelated flat panel displays led many people to question the resolution claims of PenTile display products. Journalists have noted that in "just about every flat-panel TV in existence, each pixel is composed of one red, one green, and one blue subpixel (RGB), all of uniform size". In traditional flat-panel screens, the resolution is defined by the number of red, green, and blue subpixels, in groups of three, in an array in each axis. As a result, each pixel or group of subpixels can render any colour on the screen, regardless of neighbouring pixels. This is not the case with PenTile screens. The Video Electronics Standards Association (VESA) method of measuring and defining resolution in color displays is to measure the contrast of line pairs, requiring a minimum of 50% Michelson contrast for displays intended for rendering text. The developers of PenTile displays use this VESA criterion for contrast of line pairs to calculate the resolutions specified. In the RGBG layout the alternate red and blue subpixels are 'shared' or sub-sampled with neighboring pixels. Due to the one third lower subpixel density on PenTile displays the pixel structure may be more visible when compared to RGB stripe displays with the same pixel density. The loss of subpixels for a given resolution specification has led some journalists to describe the use of PenTile as "shady practice" and "sort of cheating". For a given size and resolution specification, the PenTile screen can appear grainy, pixelated, speckled, with blurred text on some saturated colors and backgrounds when compared to RGB stripe color. This effect is understood to be caused by the restriction of the number of subpixels that may participate in the image reconstruction when colors are highly saturated to primaries. In the RGBW case, this is caused as the W subpixel will not be available in order to maintain the saturated color. In the RGBG case, this effect will occur when the color boundary is primarily red or blue, as the fully populated (one green per pixel) sub-pixel cannot contribute. For all other cases, text and especially full color images are effectively reconstructed. == Advantages and disadvantages == The PenTile layout reduces the number of subpixels needed to create a specified resolution. Consequently it is possible to achieve an HD resolution on a PenTile AMOLED screen at lower cost than other technologies, and most reviewers note that "300 ppi" (as per VESA - not full pixels) resolution displays (such as Samsung Galaxy S III) make the PenTile effect less obvious than lower resolution PenTile displays (Droid Razr). The second advantage is lower power consumption: the HTC One S's use of a PenTile display makes it more energy efficient and thinner than equivalent LCD screens, giving it better battery life than the HTC One X's IPS LCD. A PenTile AMOLED screen is also

  Read more →
• 

  Data preservation

  Data preservation is the act of conserving and maintaining both the safety and integrity of data. Preservation is done through formal activities that are governed by policies, regulations and strategies directed towards protecting and prolonging the existence and authenticity of data and its metadata. Data can be described as the elements or units in which knowledge and information is created, and metadata are the summarizing subsets of the elements of data; or the data about the data. The main goal of data preservation is to protect data from being lost or destroyed and to contribute to the reuse and progression of the data. == History == Most historical data collected over time has been lost or destroyed. War and natural disasters combined with the lack of materials and necessary practices to preserve and protect data has caused this. Usually, only the most important data sets were saved, such as government records and statistics, legal contracts and economic transactions. Scientific research and doctoral theses data have mostly been destroyed from improper storage and lack of data preservation awareness and execution. Over time, data preservation has evolved and has generated importance and awareness. We now have many different ways to preserve data and many different important organizations involved in doing so. The first digital data preservation storage solutions appeared in the 1950s, which were usually flat or hierarchically structured. While there were still issues with these solutions, it made storing data much cheaper, and more easily accessible. In the 1970s relational databases as well as spreadsheets appeared. Relational data bases structure data into tables using structured query languages which made them more efficient than the preceding storage solutions, and spreadsheets hold high volumes of numeric data which can be applied to these relational databases to produce derivative data. More recently, non-relational (non-structured query language) databases have appeared as complements to relational databases which hold high volumes of unstructured or semi-structured data. == Importance == The scope of data preservation is vast. Everything from governmental to business records to art essentially can be represented as data, and is amenable to be lost. This then leads to loss of human history, for perpetuity. Data can be lost on a small or independent scale whether it's personal data loss, or data loss within businesses and organizations, as well as on a larger or national or global scale which can negatively and potentially permanently affect things such as environmental protection, medical research, homeland security, public health and safety, economic development and culture. The mechanisms of data loss are also as many as they are varied, spanning from disaster, wars, data breaches, negligence, all the way through simple forgetting to natural decay. Ways in which data collections can be used when preserved and stored properly can be seen through the U.S. Geological Survey, which stores data collections on natural hazards, natural resources, and landscapes. The data collected by the Survey is used by federal and state land management agencies towards land use planning and management, and continually needs access to historical reference data. == Related Concepts == In contrast, data holdings are collections of gathered data that are informally kept, and not necessarily prepared for long-term preservation. For example, a collection or back-up of personal files. Data holdings are generally the storage methods used in the past when data has been lost due to environmental and other historical disasters. Furthermore, data retention differs from data preservation in the sense that by definition, to retain an object (data) is to hold or keep possession or use of the object. To preserve an object is to protect, maintain and keep up for future use. Retention policies often circle around when data should be deleted on purpose as well, and held from public access, while preservation prioritizes permanence and more widely shared access. Thus, data preservation exceeds the concept of having or possessing data or back up copies of data. Data preservation ensures reliable access to data by including back-up and recovery mechanisms that precede the event of a disaster or technological change. == Methods == === Digital === Digital preservation, is similar to data preservation, but is mainly concerned with technological threats, and solely digital data. Essentially digital data is a set of formal activities to enable ongoing or persistent use and access of digital data exceeding the occurrence of technological malfunction or change. Digital preservation is aware of the inevitable change in technology and protocols, and prepares for data that will need to be accessible across new types of technologies and platforms while the integrity of the data and metadata are being conserved. Technology, while providing great process in conserving data that may not have been possible in the past, is also changing at such a quick rate that digital data may not be accessible anymore due to the format being incompatible with new software. Without the use of data preservation much of our existing digital data is at risk. The majority of methods used towards data preservation today are digital methods, which are so far the most effective methods that exist. === Archives === Archives are a collection of historical documents and records. Archives contribute and work towards the preservation of data by collecting data that is well organized, while providing the appropriate metadata to confirm it. An example of an important data archive is The LONI Image Data Archive, which is an archive that collects data regarding clinical trials and clinical research studies. === Catalogues, directories and portals === Catalogues, directories and portals are consolidated resources which are kept by individual institutions, and are associated with data archives and holdings. In other words, the data is not presented on the site, but instead might act as metadata and aggregators, and may administer thorough inventories. === Repositories === Repositories are places where data archives and holdings can be accessed and stored. The goal of repositories is to make sure that all requirements and protocols of archives and holdings are being met, and data is being certified to ensure data integrity and user trust. Single-site Repositories A repository that holds all data sets on a single site. An example of a major single-site repository the Data Archiving and Networking Services which is a repository which provides ongoing access to digital research resources for the Netherlands. Multi-Site Repositories A repository that hosts data set on multiple institutional sites. An example of a well known multi-site repository is OpenAIRE which is a repository that hosts research data and publications collaborating all of the EU countries and more. OpenAIRE promotes open scholarship and seeks to improves discover-ability and re-usability of data. Trusted Digital Repository A repository that seeks to provide reliable, trusted access over a long period of time. The repository can be single or multi-sited but must cooperate with the Reference Model for an Open Archival Information System, as well as adhere to a set of rules or attributes that contribute to its trust such as having persistent financial responsibility, organizational buoyancy, administrative responsibility security and safety. An example of a trusted digital repository is The Digital Repository of Ireland (DRI) which is a multi-site repository that hosts Ireland's humanity and social science data sets. === Cyber Infrastructures === Cyber infrastructures which consists of archive collections which are made available through the system of hardware, technologies, software, policies, services and tools. Cyber infrastructures are geared towards the sharing of data supporting peer-to-peer collaborations and a cultural community. An example of a major cyber-infrastructure is The Canadian Geo-spatial Data Infrastructure which provides access to spatial data in Canada.

  Read more →
• 

  Electronic lab notebook

  An electronic lab notebook or electronic laboratory notebook (ELN) is a computer program designed to replace paper laboratory notebooks. Lab notebooks in general are used by scientists, engineers, and technicians to document research, experiments, and procedures performed in a laboratory. A lab notebook is often maintained to be a legal document and may be used in a court of law as evidence. Similar to an inventor's notebook, the lab notebook is also often referred to in patent prosecution and intellectual property litigation. Electronic lab notebooks offer many benefits to the user as well as organizations; they are easier to search upon, simplify data copying and backups, and support collaboration amongst many users. ELNs can have fine-grained access controls, and can be more secure than their paper counterparts. They also allow the direct incorporation of data from instruments, replacing the practice of printing out data to be stapled into a paper notebook. == Types == ELNs can be divided into two categories: "Specific ELNs" contain features designed to work with specific applications, scientific instrumentation or data types. "Cross-disciplinary ELNs" or "Generic ELNs" are designed to support access to all data and information that needs to be recorded in a lab notebook. Lab Platforms that combine an ELN, LIMS, and scientific data management together, all-in-one configurable software environment. Solutions range from specialized programs designed from the ground up for use as an ELN, to modifications or direct use of more general programs. Examples of using more general software as an ELN include using OpenWetWare, a MediaWiki install (running the same software that Wikipedia uses), WordPress, or the use of general note taking software such as OneNote as an ELN. ELN's come in many different forms. They can be standalone programs, use a client-server model, or be entirely web-based. Some use a lab-notebook approach, others resemble a blog. ELNs are embracing artificial intelligence and LLM technology to provide scientific AI chat assistants. A good many variations on the "ELN" acronym have appeared. Differences between systems with different names are often subtle, with considerable functional overlap between them. Examples include "ERN" (Electronic Research Notebook), "ERMS" (Electronic Resource (or Research or Records) Management System (or Software) and SDMS (Scientific Data (or Document) Management System (or Software). Ultimately, these types of systems all strive to do the same thing: Capture, record, centralize and protect scientific data in a way that is highly searchable, historically accurate, and legally stringent, and which also promotes secure collaboration, greater efficiency, reduced mistakes and lowered total research costs. == Objectives == A good electronic laboratory notebook should offer a secure environment to protect the integrity of both data and process, whilst also affording the flexibility to adopt new processes or changes to existing processes without recourse to further software development. The package architecture should be a modular design, so as to offer the benefit of minimizing validation costs of any subsequent changes that you may wish to make in the future as your needs change. A good electronic laboratory notebook should be an "out of the box" solution that, as standard, has fully configurable forms to comply with the requirements of regulated analytical groups through to a sophisticated ELN for inclusion of structures, spectra, chromatograms, pictures, text, etc. where a preconfigured form is less appropriate. All data within the system may be stored in a database (e.g. MySQL, MS-SQL, Oracle) and be fully searchable. The system should enable data to be collected, stored and retrieved through any combination of forms or ELN that best meets the requirements of the user. The application should enable secure forms to be generated that accept laboratory data input via PCs and/or laptops / palmtops, and should be directly linked to electronic devices such as laboratory balances, pH meters, etc. Networked or wireless communications should be accommodated for by the package which will allow data to be interrogated, tabulated, checked, approved, stored and archived to comply with the latest regulatory guidance and legislation. A system should also include a scheduling option for routine procedures such as equipment qualification and study related timelines. It should include configurable qualification requirements to automatically verify that instruments have been cleaned and calibrated within a specified time period, that reagents have been quality-checked and have not expired, and that workers are trained and authorized to use the equipment and perform the procedures. == Regulatory and legal aspects == The laboratory accreditation criteria found in the ISO 17025 standard needs to be considered for the protection and computer backup of electronic records. These criteria can be found specifically in clause 4.13.1.4 of the standard. Electronic lab notebooks used for development or research in regulated industries, such as medical devices or pharmaceuticals, are expected to comply with FDA regulations related to software validation. The purpose of the regulations is to ensure the integrity of the entries in terms of time, authorship, and content. Unlike ELNs for patent protection, FDA is not concerned with patent interference proceedings, but is concerned with avoidance of falsification. Typical provisions related to software validation are included in the medical device regulations at 21 CFR 820 (et seq.) and Title 21 CFR Part 11. Essentially, the requirements are that the software has been designed and implemented to be suitable for its intended purposes. Evidence to show that this is the case is often provided by a Software Requirements Specification (SRS) setting forth the intended uses and the needs that the ELN will meet; one or more testing protocols that, when followed, demonstrate that the ELN meets the requirements of the specification and that the requirements are satisfied under worst-case conditions. Security, audit trails, prevention of unauthorized changes without substantial collusion of otherwise independent personnel (i.e., those having no interest in the content of the ELN such as independent quality unit personnel) and similar tests are fundamental. Finally, one or more reports demonstrating the results of the testing in accordance with the predefined protocols are required prior to release of the ELN software for use. If the reports show that the software failed to satisfy any of the SRS requirements, then corrective and preventive action ("CAPA") must be undertaken and documented. Such CAPA may extend to minor software revisions, or changes in architecture or major revisions. CAPA activities need to be documented as well. Aside from the requirements to follow such steps for regulated industry, such an approach is generally a good practice in terms of development and release of any software to assure its quality and fitness for use. There are standards related to software development and testing that can be applied (see ref.).

  Read more →
• 

  Consumer relationship system

  Consumer relationship systems (CRS) are specialized customer relationship management (CRM) software applications that are used to handle a company's dealings with its customers. Current consumer relationship systems integrate the software with telephone and call recording systems as well as with corporate systems for input and reporting. Customers can provide input from the company's website directly into the CRS. These systems are popular because they can deliver the 'voice of the consumer' that contributes to product quality improvement and that ultimately increases corporate profits. Consumer relationship systems that provide automated support as well as advanced systems may have artificial intelligence (AI) interfaces that can extract and analyse data collected, or handle basic questions and complaints. == History == The first CRS was developed in the 1980s. In 1981 Michael Wilke and Robert Thornton founded Wilke/Thornton, Inc in Columbus, Ohio, to develop new CRS software.

  Read more →
• 

  DexNet

  Dex-net is a robotic. It uses a Grasp Quality Convolutional Neural Network to learn how to grasp unusually shaped objects. == History == Dex-net was developed by University of California, Berkeley professor Ken Goldberg and graduate student Jeff Mahler. == Design == Dex-net includes a high-resolution 3-D sensor and two arms, each controlled by a different neural network. One arm is equipped with a conventional robot gripper and another with a suction system. The robot’s software scans an object and then asks both neural networks to decide, on the fly, whether to grab or suck a particular object. It runs on an off-the-shelf industrial machine made by Swiss robotics company ABB. The software learns by attempting to pick up objects in a virtual environment. Dex-Net can generalize from an object it has seen before to a new one. The robot can "nudge" such virtual objects to examine if it is unsure how to grasp them. The trial data set was 6.7 million point clouds, grasps and analytic grasp metrics generated from thousands of 3D models. Grasps are defined as a gripper's planar position, angle and depth relative to an RGB-D sensor. == Mean picks per hour == A metric called mean picks per hour (MPPH) is calculated by multiplying the average time per pick and the average probability of success for a specific set of objects. The new metric allows labs working on picking robots to compare their results. Humans are capable of between 400 and 600 MPPH. In a contest organized by Amazon recently, the best robots were capable of between 70 and 95. Dex-net has achieved 200 to 300.

  Read more →
• 

  Social media therapy

  Social media therapy is a form of expressive therapy. It uses the act of creating and sharing user-generated content as a way of connecting with and understanding people. Social media therapy combines different expressive therapy aspects of talk therapy, art therapy, writing therapy, and drama therapy and applies them to the web domain. Within social media therapy, synchronous or asynchronous dialogue occurs through exchanges of audio, text or visual information. The digital content is published online to serve as a form of therapy. == Background == Time spent online via email, websites, instant messaging and social media has increased: since 1999, more than 2,554 million people have become internet users. This alters the way people communicate with each other, and alters the connotation of certain words. The concepts of "identity", "friend", "like" and "connected" have adapted alongside technology. People are influenced by data sharing, social marketing, and technological tools. There are multiple therapeutic services offered through the internet. E-therapy, online counseling, cyber therapy, and social media therapy are similar in that each utilizes the internet in order to provide therapy for patients. == Controversy == There are pros and cons when it comes to the subject of online therapy. Criticism of providing therapy through online methods comes from concerns over the lack of physical contact. There are important features of therapy created through face-to-face therapy such as transference and countertransference that can not be created through online therapy. Patricia R. Recupero and Samara E. Rainey stated in their article "Informed Consent to E-Therapy" of American Journal of Psychotherapy that the lack of face-to-face interaction increased the risk of misdiagnosis and misunderstanding between the E-therapist and patient, thereby increasing the risk of uncertainty for the clinician. There are also concerns over the internet creating a distraction from the therapy itself. Confidentiality and privacy concerns have been raised as well. However, several systematic reviews have found that online psychotherapy can produce clinical outcomes comparable to face-to-face treatment, suggesting that physical distance does not inherently reduce therapeutic effectiveness.

  Read more →
• 

  OARnet

  The Ohio Academic Resources Network (OARnet) is a state-funded IT organization that provides member organizations with intrastate networking, virtualization and cloud computing applications, advanced videoconferencing, connections to regional and international research networks and the commodity Internet, colocation services, and emergency web-hosting. The OARnet network (known for a time as Third Frontier Network and later, OSCnet) is a dedicated, statewide, high-speed fiber-optic network that serves Ohio K-12 schools, college and university campuses, academic medical centers, public broadcasting stations and state and local/state government. OARnet is connected in Cleveland and Cincinnati to Internet2, the United States' most advanced nationwide research and education network. OARnet also maintains direct connections to Michigan's Merit network and OmniPoP in Chicago. OARnet offices are located on the West Campus of Ohio State University in Columbus, Ohio, United States. OARnet additionally serves as the delegated registrar for many third-level domains (both generic and locality-based) under .oh.us and some under .in.us and .ky.us. == History == A member-organization of the Ohio Technology Consortium, the technology and information division of the Ohio Board of Regents (now the Ohio Department of Higher Education), OARnet was created by the Ohio General Assembly in 1987 to provide Ohio researchers with network connectivity to the resources of the Ohio Supercomputer Center (OSC). It was recognized at the time that the network would serve a much broader audience, so when a network name was selected in early 1988, OARnet was chosen to emphasize the many uses of the network. The initial plan (1987) was to make use of a number of existing BITNET and CCnet (regional DECnet network) connections to get started. Three network (compatible) protocols were used, NJE, DECnet, and TCP/IP. The first OARnet-funded line was installed between Case Western Reserve University and John Carroll University in June 1987. Many subsequent lines at 9.6 kbit/s, 56 kbit/s, and T1 (1.544 Mbit/s) were installed with the aid of an Ohio Department of Administrative Services contract with Litel Corp. Internet (then NSFNET) connections were obtained in the spring of 1988. The non-TCP/IP protocols were soon phased out, and a process of upgrading connections took place regularly. In 1991, it was decided that OARnet would accept commercial business, at appropriate rates, for Internet connection services. Thus OARnet became one of the first Internet service providers (ISPs) in Ohio. After commercial ISPs entered the business extensively, OARnet stopped seeking new commercial accounts. A very large increase in backbone capacity occurred (planning 2000–02, installation 2003–04) when it became possible to lease optical fiber lines themselves ("dark fiber"). A new network backbone of 1,850 miles was installed at much higher capacity, and the eTech Ohio Commission and the Ohio Department of Education joined in funding and using OARnet. The fiber-optic backbone was launched in November 2004. In 2006, OARnet provided one of the first networks for delivery of live TV via Internet Protocol, known today as IPTV. OARnet served as the backbone for Ohio News Network to transmit Miami Redhawks hockey. The team finished the 2008-2009 season at the Frozen Four with a 4-3 OT loss to Boston University in the championship. It was one of the first live sports transmission deliveries over IPTV in the US. Another sharp jump in capacity occurred in 2012, when the State of Ohio funded an upgrade of the OARnet backbone to 100 Gigabits per second. Today, more than 1,500 miles of Ohio’s network backbone runs at an ultra-fast 100 Gbit/s, which was recognized by ComputerWorld in the Emerging Technology category of their 2013 Computerworld Honors Laureates program. In November 2012, Case Western Reserve University became the first member institution to connect at 100 Gbit/s to the OARnet backbone. The OARnet leaders have been: Russell M. Pitzer, director, 1987–88 Alison Brown, director, 1988–94 John Ritter, acting director, 1995 Larry Buell, acting director, 1996–97 Douglas Gale, director, 1998–2002 Alvin Stutz, director, 2002–05 Pankaj Shah, executive director, 2005–15 Paul Schopis, interim executive director, 2015–2018, executive director 2018–19 Denis Walsh, interim executive director, 2019–20 Pankaj Shah, executive director, 2020–

  Read more →