AI Data Privacy Concerns

AI Data Privacy Concerns — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Discrete skeleton evolution

Discrete Skeleton Evolution (DSE) describes an iterative approach to reducing a morphological or topological skeleton. It is a form of pruning in that it removes noisy or redundant branches (spurs) generated by the skeletonization process, while preserving information-rich "trunk" segments. The value assigned to individual branches varies from algorithm to algorithm, with the general goal being to convey the features of interest of the original contour with a few carefully chosen lines. Usually, clarity for human vision (aka. the ability to "read" some features of the original shape from the skeleton) is valued as well. DSE algorithms are distinguished by complex, recursive decision-making processes with high computational requirements. Pruning methods such as by structuring element (SE) convolution and the Hough transform are general purpose algorithms which quickly pass through an image and eliminate all branches shorter than a given threshold. DSE methods are most applicable when detail retention and contour reconstruction are valued. == Methodology == === Pre-processing === Input images will typical contain more data than is necessary to generate an initial skeleton, and thus must be reduced in some way. Reducing the resolution, converting to grayscale, and then binary by masking or thresholding are common first steps. Noise removal may occur before and/or after converting an image to binary. Morphological operations such as closing, opening, and smoothing of the binary image may also be part of pre-processing. Ideally, the binarized contour should be as noise-free as possible before the skeleton is generated. === Skeletonization === DSE techniques may be applied to an existing skeleton or incorporated as part of the skeleton growing algorithm. Suitable skeletons may be obtained using a variety of methods: Thinning algorithms, such as the Grassfire transform Voronoi diagram Medial Axis Transform or Symmetry Axis Transform Distance Mapping === Significance Measures === DSE and related methods remove entire spurious branches while leaving the main trunk intact. The intended result is typically optimized for visual clarity and retention of information, such that the original contour can be reconstructed from the fully pruned skeleton. The value of various properties must be weighted by the application, and improving the efficiency is an ongoing topic of research in computer vision and image processing. Some significance measures include: Discrete Bisector Function Contour length Bending Potential Ratio Discrete Curve Evolution === Iteration === Each branch is evaluated during a pass through the skeletonized image according to the specific algorithm being used. Low value branches are removed and the process is repeated until a desired threshold of simplicity is reached. === Reconstruction === If all points on the output skeleton are the center points of maximal disks of the image and the radius information is retained, a contour image can be reconstructed == Applications == === Handwriting and text parsing === Variability in hand-written text is an ongoing challenge, simplification makes it somewhat easier for computer vision algorithms to make judgements about intended characters. === Soft body classification (animals) === The maximal disks centered on the skeleton imply roughly spherical masses, the features of the extracted skeleton are relatively unchanged even as the soft body deforms or self-occludes. Skeleton information is one facet of determining whether two animals are the "same" some way, though it must usually be paired with another technique to effectively identify a target. === Medical uses === Investigation of organs, tissue damage and deformation caused by disease.
Read more →
Digital cinematography

Digital cinematography is the process of capturing (recording) a motion picture using digital image sensors rather than through film stock. As digital technology has improved in recent years, this practice has become dominant. Since the 2000s, most movies across the world have been captured as well as distributed digitally. Many vendors have brought products to market, including traditional film camera vendors like Arri and Panavision, as well as new vendors like Red, Blackmagic, Silicon Imaging, Vision Research and companies which have traditionally focused on consumer and broadcast video equipment, like Sony, GoPro, and Panasonic. As of 2023, professional 4K digital cameras were approximately equal to 35mm film in their resolution and dynamic range capacity. Some filmmakers still prefer to use film picture formats to achieve the desired results. == History == The basis for digital cameras are metal–oxide–semiconductor (MOS) image sensors. The first practical semiconductor image sensor was the charge-coupled device (CCD), based on MOS capacitor technology. Following the commercialization of CCD sensors during the late 1970s to early 1980s, the entertainment industry slowly began transitioning to digital imaging and digital video over the next two decades. The CCD was followed by the CMOS active-pixel sensor (CMOS sensor), developed in the 1990s. Beginning in the late 1980s, Sony began marketing the concept of "electronic cinematography," utilizing its analog Sony HDVS professional video cameras. The effort met with very little success. However, this led to one of the earliest high definition video shot feature movies, Julia and Julia (1987). Rainbow (1996) was the world's first film to utilize extensive digital post production techniques. Shot entirely with Sony's first Solid State Electronic Cinematography cameras and featuring over 35 minutes of digital image processing and visual effects, all post production, sound effects, editing and scoring were completed digitally. The Digital High Definition image was transferred to a 35mm negative via an electron beam recorder for theatrical release. The first digitally videoed and post produced feature was Windhorse, shot in Tibet and Nepal in 1996 on the Sony DVW-700WS Digital Betacam and the prosumer Sony DCR-VX1000. The offline editing (Avid) and the online post and color work (Roland House / da Vinci) were also all digital. The film, transferred to 35mm negative for theatrical release, won Best U.S. Feature at the Santa Barbara Film Festival in 1998. In 1997, with the introduction of HDCAM recorders and 1920 × 1080 pixel digital professional video cameras based on CCD technology, the idea, now re-branded as "digital cinematography," began to gain traction in the market. Shot and released in 1998, The Last Broadcast is believed by some to be the first feature-length video shot and edited entirely on consumer-level digital equipment. In May 1999, George Lucas challenged the supremacy of the movie-making medium of film for the first time by including footage filmed with high-definition digital cameras in Star Wars: Episode I – The Phantom Menace. The digital footage blended seamlessly with the footage shot on film and he announced later that year he would film its sequels entirely on hi-def digital video. Also in 1999, digital projectors were installed in four theaters for the showing of The Phantom Menace. In May 2000, Vidocq, which was directed by Pitof, began principal photography shot entirely using a Sony HDW-F900 camera, with the video being released in September the next year. According to the Guinness World Records, Vidocq is the first full length feature filmed in digital high resolution. In June 2000, Star Wars: Episode II – Attack of the Clones began principal photography shot entirely using a Sony HDW-F900 camera as Lucas had previously stated. The film was released in May 2002. In May 2001 Once Upon a Time in Mexico was also shot in 24 frame-per-second high-definition digital video, partially developed by George Lucas using a Sony HDW-F900 camera, following Robert Rodriguez's introduction to the camera at Lucas' Skywalker Ranch facility whilst editing the sound for Spy Kids. A lesser-known movie, Russian Ark (2002), was also shot with the same camera and was the first tapeless digital movie, recorded on HDD instead of tape. In 2009, Slumdog Millionaire became the first movie shot mainly in digital to be awarded the Academy Award for Best Cinematography. The highest-grossing movie in the history of cinema, Avatar (2009), not only was shot on digital cameras as well, but also made the main revenues at the box office no longer by film, but digital projection. Major movies shot on digital video overtook those shot on film in 2013. Since 2016 over 90% of major films were shot on digital video. As of 2017, 92% of films are shot on digital. Only 24 major films released in 2018 were shot on 35mm. Since the 2000s, most movies across the world have been captured as well as distributed digitally. Today, cameras from companies like Sony, Panasonic, JVC and Canon offer a variety of choices for shooting high-definition video. At the high-end of the market, there has been an emergence of cameras aimed specifically at the digital cinema market. These cameras from Sony, Vision Research, Arri, Blackmagic Design, Panavision, Grass Valley and Red offer resolution and dynamic range that exceeds that of traditional video cameras, which are designed for the limited needs of broadcast television. == Technology == Digital cinematography captures motion pictures digitally in a process analogous to digital photography. While there is a clear technical distinction that separates the images captured in digital cinematography from video, the term "digital cinematography" is usually applied only in cases where digital acquisition is substituted for film acquisition, such as when shooting a feature film. The term is seldom applied when digital acquisition is substituted for video acquisition, as with live broadcast television programs. === Recording === ==== Cameras ==== Professional cameras include the Sony CineAlta (F) Series, Blackmagic Cinema Camera, Red One, Arri D-20, D-21 and Alexa, Panavision Genesis, Silicon Imaging SI-2K, Thomson Viper, Vision Research Phantom, IMAX 3D camera based on two Vision Research Phantom cores, Weisscam HS-1 and HS-2, GS Vitec noX, and the Fusion Camera System. Independent micro-budget filmmakers have also pressed low-cost consumer and prosumer cameras into service for digital filmmaking. Flagship smartphones like the Apple iPhone have been used to shoot movies like Unsane (shot on the iPhone 7 Plus) and Tangerine (shot on three iPhone 5S phones) and in January 2018, Unsane's director and Oscar winner Steven Soderbergh expressed an interest in filming other productions solely with iPhones going forward. ==== Sensors ==== Digital cinematography cameras capture digital images using image sensors, either charge-coupled device (CCD) sensors or CMOS active-pixel sensors, usually in one of two arrangements. Single chip cameras designed specifically for the digital cinematography market often use a single sensor (much like digital photo cameras), with dimensions similar in size to a 16 or 35 mm film frame or even (as with the Vision 65) a 65 mm film frame. An image can be projected onto a single large sensor exactly the same way it can be projected onto a film frame, so cameras with this design can be made with PL, PV and similar mounts, in order to use the wide range of existing high-end cinematography lenses available. Their large sensors also let these cameras achieve the same shallow depth of field as 35 or 65 mm motion picture film cameras, which many cinematographers consider an essential visual tool. Codecs Professional raw video recording codecs include Blackmagic Raw, Red Raw, Arri Raw and Canon Raw. ==== Video formats ==== Unlike other video formats, which are specified in terms of vertical resolution (for example, 1080p, which is 1920×1080 pixels), digital cinema formats are usually specified in terms of horizontal resolution. As a shorthand, these resolutions are often given in "nK" notation, where n is the multiplier of 1024 such that the horizontal resolution of a corresponding full-aperture, digitized film frame is exactly 1024 n {\displaystyle 1024n} pixels. Here the "K" has a customary meaning corresponding to the binary prefix "kibi" (ki). For instance, a 2K image is 2048 pixels wide, and a 4K image is 4096 pixels wide. Vertical resolutions vary with aspect ratios though; so a 2K image with an HDTV (16:9) aspect ratio is 2048×1152 pixels, while a 2K image with a SDTV or Academy ratio (4:3) is 2048×1536 pixels, and one with a Panavision ratio (2.39:1) would be 2048×856 pixels, and so on. Due to the "nK" notation not corresponding to specific horizontal resolutions per format a 2K image lacking, for example, the typical 35mm film soundtrack space, is only 182
Read more →
Full30

Full30 was an American online video-sharing platform primarily dedicated to firearms and shooting sports-related content. The service was established in 2014 by Tim Harmsen and Mark Hammonds as a result of YouTube's increasing restrictions on gun-related videos. == History == After the 2018 Parkland high school shooting, many companies attempted to distance themselves from any association with the firearms industry. As a result, YouTube began demonetizing and sometimes outright deleting firearms-related videos, and in one case, popular YouTube poster Hickok45's channel was completely deleted but later restored. In response, Harmsen, who operates the Military Arms Channel on YouTube, decided to create his own video-hosting website to allow himself and other firearms content creators a platform free from such restrictions; he named the website Full30 — a reference to the popular 30-round STANAG magazine. In July 2020, site representatives announced the site had new ownership. By the end of 2022, the site began to be redirected to a series of other websites. By 2025, it was largely deactivated with the front page replaced by a form to be filled out to receive "updates", with no other explanation. == Contributors == Hickok45 Military Arms Channel Forgotten Weapons Bavarian Shooter Liberty Doll CloverTac
Read more →
Battleboarding

Battleboarding, also known as versus debating and "who would win" debating, is an activity that involves discussing and debating around hypothetical fights between individuals; most popularly, fictional characters. These debates are often held in forums, blogs, sites and wikis, known as versus sites or battle boards. Netizens who engage in battleboarding online are often called "battleboarders". The earliest iterations of battleboarding first appeared in various online boards and forums, though its origins can be traced back to magazines, television shows, and comic book letter columns. Eventually, the online activity grew, becoming one of the most popular internet activities today, and spawning many online communities dedicated solely for battleboarding. It soon evolved into its own subculture, and even went on to inspire other media. == History == === Origins === Before the advent of the internet, articles about hypothetical fights were published in magazines. These articles range from topics like sports, comics and anime, such as Black Belt Magazine issue May 1997 which discussed about a hypothetical match between Muhammad Ali and Bruce Lee, and Wizard Magazine #133 which discussed about various hypothetical fights between American comic characters against Japanese anime characters. During that time, many comic book publishers also conceptualized and published "versus" storylines like Batman Versus Predator and Justice League/Avengers. Many films also capitalized on the concept of characters from different franchises fighting each other, such as Frankenstein Meets the Wolf Man (1934), King Kong vs. Godzilla (1962), Freddy vs Jason (2003), and Alien vs. Predator (2004). Another inspiration behind battleboarding were television shows and documentaries whose premise involved hypothetical fights concerning a variety of subjects like zoology, paleontology, and military history. These include shows such as Animal Face-Off (which pitted animals against each other), Deadliest Warrior (which pitted historical warriors, oftentimes from different time periods, against each other), and Jurassic Fight Club (which was about analyzing cases where different types of dinosaurs fought one another). Death Battle, a web series about pitting characters against each other that began in 2010, is a similar show that soon inspired many battleboarding communities and fandoms. Death Battle, as with many other battleboarding series and websites before it, utilised "calcs", which are mathematical equations that try to calculate how strong a character or weapon is. Other popular web series about the subject include Super Power Beat Down and Grudge Match. === Forums and sites === Many internet forums about movies, comics, anime, and video games often held discussions about hypothetical fights between characters from these media. These discussions would be the first iteration of online battleboarding. A notable early battleboarding website was stardestroyer.net (founded 1998), created by Michael Wong. The website focuses in large part on match-ups between the Star Wars and Star Trek franchises, and also includes a forum covering this as well as other more general battleboarding topics, usually related to science fiction and space opera. In addition to the forums, several webpages written by the administrators and contributors were embedded on the site. These attempted to mathematically quantify the capabilities of Star Wars technology and prove their superiority to their Star Trek equivalents, such as Wong's "Star Wars vs Star Trek: Technology Overview" and Brian Young's "Turbolaser Commentaries." stardestroyer.net had a notable impact on early battleboarding culture and also influenced official products. Curtis Saxton, author of several officially-licensed Star Wars technical reference books, thanked Wong, Young, and several other stardestroyer.net contributors by name in the acknowledgements section of Star Wars: Attack of the Clones Incredible Cross-Sections (2002), referring to them as "prominent among the hundreds of people contributing to constructive debates about Star Wars technicalities over the years, resulting in the consensus of conceptual and physical foundations applied in these pages." Saxton's books in the Incredible Cross-Sections series contain specific numbers about the capabilities of Star Wars ships original to these publications and not used in any other official sources. In an interview conducted by TheForce.Net, Saxton claimed to have been offered the job of writing reference books by a DK employee familiar with his "Star Wars Technical Commentaries" webpage (1995–2001), where Saxton attempted to calculate the firepower, speed, and durability of Star Wars spaceships using his background as an astrophysics student. One of the oldest and longest-running battleboarding forum is Comic Vine's "battle forum", whose first post was in 2007. Comic Vine also has one of the largest impacts on battleboarding, creating many common rules and terminologies such as "bloodlusted", "morals are off", "speed equalized", and many others. Another long-running battle forum is a subreddit called r/whowouldwin, where redditors can post and debate fights about real or fictional individuals. Verdicts of these match-ups are often chosen by using evidences of a character's power, weakness, or feat, such as movie clips, comic book panel scans, and excerpts from related literature; all of which are posted and categorized in a separate subreddit called r/respectthreads. Other influential battle forums include Fanverse, where users can post their own calcs about a character's power level. The popularity of battle forums inspired the creation of websites dedicated only for battleboarding. These include The Outskirts Battle Dome, a website that popularized the use of "power levels" in battleboarding; the aforementioned stardestroyer.net; and Space Battles, a website whose forums and threads are filled with posts about hypothetical fights between characters as well as other related topics. Another influential battleboarding site is the now defunct Fact Pile, and its sister site, FactPileTopia. Fact Pile is one of the first battleboarding site that actually listed down and documented winners of their match-ups. The site closed down in 2016 along with its forum, wikia, and YouTube channel. Besides these, blogs about battleboarding were also created, such as dreager1.com. === Wikis === Nowadays, the most popular battleboarding communities can be seen in Fandom, with two of the oldest and most popular being Deadliest Fiction and VS Battles Wiki. Deadliest Fiction is a Deadliest Warrior-inspired fanon created in July 2010 by a group of historians, academics, and pop culture enthusiasts. Being one of the most influential and accurate battleboarding sites around, Deadliest Fiction allows users to create hypothetical match-ups in the form of blogs, where other users can vote and debate around who will win in the comment section. Once a verdict is reached, the site allows the user to create a simulated fanfiction of how the fight would happen. The same year in October, a similar battleboarding site named VS Battles Wiki was created. In the VS Battles Wiki, users can create profiles and power levels of characters, post match-ups in its threads and forums, and list down the winners and losers of these threads in said character profiles. The wiki is considered the most active wiki battleboarding site today, with over 1 million visitors per month. However, throughout the years, the VS Battles Wiki has had its share of controversies, such as alleged inaccuracies in its profiles. There have also been websites and fanfiction wikis inspired by the battleboarding internet show Death Battle. These include the long-running G1 Death Battle Fan Blog, r/deathbattlematchups, and the popular Death Battle Fanon Wiki and DBX Fanon Wiki. Death Battle also released its own dice and card game, complete with rules and effects taken from battleboarding. == Subculture == In its rise in popularity, battleboarding has given birth to a unique online subculture with its own rules, activities, and terminologies. Several of these influences have become present in other online communities and popular media. Some of the common slang and terminologies used in battleboarding subculture includes: Battle Field Removal: Often abbreviated to "BFR", this is a rule that a fight can end if one character is taken out of a battlefield. This rule is used for characters who have the powers to teleport or transport enemies without actually killing them. Battle Royale: A term originating from Comic Vine in which multiple characters are pitted against each other. The name is probably derived from the film Battle Royale or the video game genre of the same name. Bloodlusted: A hypothetical situation wherein the characters are pitted against each other while in a furious, berserker-like state. Calc: These are calculations battl
Read more →
Clef (app)

Clef was a San Francisco-based technology company, known for developing a mobile app that created a two-factor authentication for websites. It allowed users to access sites with a single login password management service which stores encrypted passwords in private accounts. It had a standard verification method that requires access to data on the mobile phone to confirm the user's identity. The application required a Wi-Fi or mobile network, and the user could log in by scanning the computer screen with their phone. == History == Clef was founded in 2013 by Mark Hudnall, B. Byrne and Jesse Pollak. It raised $1.6 million in seed funding in November 2014. Clef integrated with many websites and applications, including WordPress. On March 17, 2017, Clef announced they would no longer support the plugin after June 6, 2017; Clef was acquired by Authy, another 2FA service, which later got acquired by Twilio.
Read more →
Open Rights Group

The Open Rights Group (ORG) is a UK-based organisation that works to preserve digital rights and freedoms by campaigning on digital rights issues and by fostering a community of grassroots activists. It campaigns on numerous issues including mass surveillance, internet filtering and censorship, and intellectual property rights. == History == The organisation was started by Danny O'Brien, Cory Doctorow, Ian Brown, Rufus Pollock, James Cronin, Stefan Magdalinski, Louise Ferguson and Suw Charman after a panel discussion at Open Tech 2005. O'Brien created a pledge on PledgeBank, placed on 23 July 2005, with a deadline of 25 December 2005: "I will create a standing order of 5 pounds per month to support an organisation that will campaign for digital rights in the UK but only if 1,000 other people will too." The pledge reached 1000 people on 29 November 2005. The Open Rights Group was launched at a "sell-out" meeting in Soho, London. == Work == The group has made submissions to the All Party Internet Group (APIG) inquiry into digital rights management and the Gowers Review of Intellectual Property. The group was honoured in the 2008 Privacy International Big Brother Awards alongside No2ID, Liberty, Genewatch UK and others, as a recognition of their efforts to keep state and corporate mass surveillance at bay. In 2010 the group worked with 38 Degrees to oppose the introduction of the Digital Economy Act, which was passed in April 2010. The group opposes measures in the draft Online Safety Bill introduced in 2021, that it sees as infringing free speech rights and online anonymity. The group campaigns against the Department for Digital, Culture, Media and Sport's plan to switch to an opt-out model for cookies. The group spokesperson stated that "[t]he UK government propose to make online spying the default option" in response to the proposed switch. == Areas of interest == The organisation, though focused on the impact of digital technology on the liberty of UK citizens, operates with an apparently wide range of interests within that category. Its interests include: === Access to knowledge === Copyright Creative Commons Free and open source software The public domain Crown copyright Digital Restrictions Management Software patents === Free speech and censorship === Internet filtering Right to parody s. 127 Communications Act 2003 === Government and democracy === Electronic voting Freedom of information legislation === Privacy, surveillance and censorship === Automatic Vehicle Tracking Communications data retention Identity management Net Neutrality NHS patients' medical database Police DNA Records RFID == Structure == ORG has a paid staff, whose members include: Jim Killock (executive director) Former staff include Suw Charman-Anderson and Becky Hogge, both executive directors, e-voting coordinator Jason Kitcat, campaigner Peter Bradwell, grassroots campaigner Katie Sutton and administrator Katerina Maniadaki. Neil Gaiman was previously the group's patron. As of October 2022, the group had over 43,000 supporters. == ORGCON == ORGCON was the first ever conference dedicated to digital rights in the UK, marketed as "a crash course in digital rights". It was held for the first time in 2010 at City University in London and included keynote talks from Cory Doctorow, politicians and similar pressure groups including Liberty, NO2ID and Big Brother Watch. ORGCON has since been held in 2012, 2013, 2014, 2017, and 2019 where the keynote was given by Edward Snowden.
Read more →
GlTF

glTF (Graphics Library Transmission Format or GL Transmission Format and formerly known as WebGL Transmissions Format or WebGL TF) is a standard file format for three-dimensional scenes and models. A glTF file uses one of two possible file extensions: .gltf (JSON/ASCII) or .glb (binary). Both .gltf and .glb files may reference external binary and texture resources. Alternatively, both formats may be self-contained by directly embedding binary data buffers (as base64-encoded strings in .gltf files or as raw byte arrays in .glb files). An open standard developed and maintained by the Khronos Group, it supports 3D model geometry, appearance, scene graph hierarchy, and animation. It is intended to be a streamlined, interoperable format for the delivery of 3D assets, while minimizing file size and runtime processing by apps. As such, its creators have described it as the "JPEG of 3D". == Overview == The glTF format stores data primarily in JSON. The JSON may also contain blobs of binary data known as buffers, and refer to external files, for storing mesh data, images, etc. The binary .glb format also contains JSON text, but serialized with binary chunk headers to allow blobs to be directly appended to the file. The fundamental building blocks of a glTF scene are nodes. Nodes are organized into a hierarchy, such that a node may have other nodes defined as children. Nodes may have transforms relative to their parent. Nodes may refer to resources, such as meshes, skins, and cameras. Meshes may refer to materials, which refer to textures, which refer to images. Scenes are defined using an array of root nodes. Most of the top-level glTF properties use a flat hierarchy for storage. Nodes are saved in an array and are referred to by index, including by other nodes. A glTF scene refers to its root nodes by index. Furthermore, nodes refer to meshes by index, which refer to materials by index, which refer to textures by index, which refer to images by index. All glTF data structures support being extended using a JSON property, allowing arbitrary JSON data to be added. == Releases == === glTF 1.0 === Members of the COLLADA working group conceived the file format in 2012. At SIGGRAPH 2012, Khronos presented a demo of glTF, which was then called WebGL Transmissions Format (WebGL TF). On October 19, 2015, Khronos released the glTF 1.0 specification. ==== Adoption of glTF 1.0 ==== At SIGGRAPH 2016, Oculus announced their adoption of glTF citing the similarities to their ovrscene format. In October 2016, Microsoft joined the 3D Formats working group at Khronos to collaborate on glTF. === glTF 2.0 === The second version, glTF 2.0, was released in June 2017, and is a complete overhaul of the file format from version 1.0, with most tools adopting the 2.0 version. Based on a proposal by Fraunhofer originally presented at SIGGRAPH 2016, physically based rendering (PBR) was added, replacing WebGL shaders used in glTF 1.0. glTF 2.0 added the GLB binary format into the base specification. Other upgrades include sparse accessors and morph targets for techniques such as facial animation, and schema tweaks and breaking changes for corner cases or performance such as replacing top-level glTF object properties with arrays for faster index-based access. There is ongoing work towards import and export in Unity and an integrated multi-engine viewer and validator. ==== Adoption of glTF 2.0 ==== On March 3, 2017, Microsoft announced that they would be using glTF 2.0 as the 3D asset format across their product line, including Paint 3D, 3D Viewer, Remix 3D, Babylon.js, and Microsoft Office. Sketchfab also announced support for glTF 2.0. The glTF and GLB formats are used on and supported by companies including DGG, UX3D, Sketchfab, Facebook, Microsoft, Meta, Google, Adobe, Box, TurboSquid, Unreal Engine, Unity, and Qt Quick 3D. The format has been noted as an important standard for augmented reality, integrating with modeling software such as Autodesk Maya, Autodesk 3ds Max, and Poly. In February 2020, the Smithsonian Institution launched their Open Access Initiative, releasing approximately 2.8 million 2D images and 3D models into the public domain, using glTF for the 3D models. In July 2022, glTF 2.0 was released as the ISO/IEC 12113:2022 International Standard. Khronos stated they would make regular submissions to bring updates and new widely adopted glTF functionality into refreshed versions of ISO/IEC 12113 to ensure that there is no long-term divergence between the ISO/IEC and Khronos specifications. The open-source game engine Godot supports importing glTF 2.0 files since version 3.0 and export since version 4.0. === Extensions === The glTF format can be extended with arbitrary JSON to add new data and functionality. Extensions can be placed on any part of a glTF, including nodes, animations, materials, textures, and on the entire document. Khronos keeps a non-comprehensive registry of glTF extensions on GitHub, including all official Khronos extensions and a few third-party extensions. PBR extensions model the physical appearance of real-world objects, allowing developers to create realistic 3D assets that have the correct appearance. As new PBR extensions are released, they continue to expand PBR capabilities within the glTF framework, allowing a wider range of scenes and objects to be realistically rendered as 3D assets. The KTX 2.0 extension for universal texture compression enables 3D models in the glTF format to be highly compressed and to use natively supported texture formats, reducing file size and boosting rendering speed. Draco is a glTF extension for mesh compression, to compress and decompress 3D meshes, to help reduce the size of 3D files. It compresses vertex attributes, normals, colors, and texture coordinates. Various glTF extensions for game engine interoperability have been developed by OMI group. This includes extensions for physics shapes, physics bodies, physics joints, audio playback, seats, spawn points, and more. The VRM consortium has developed glTF extensions for advanced humanoid 3D avatars including dynamic spring bones and toon materials. == Derivative formats == 3D Tiles, an OGC Community Standard, builds on glTF to add a spatial data structure, metadata, and declarative styling for streaming massive heterogeneous 3D geospatial datasets. VRM, a model format for VR, is built on the .glb format. It is a 3D humanoid avatar specification and file format. == Software ecosystem == Khronos maintains the glTF Sample Viewer for viewing glTF assets. Khronos also maintains the glTF Validator for validating if 3D models conform to the glTF specification. Khronos maintains a glTF Compressor tool to interactively optimize and fine-tune compression settings for glTF assets using KTX 2.0 textures. glTF loaders are in open-source WebGL engines including PlayCanvas, Three.js, Babylon.js, Cesium, PEX, xeogl, and A-Frame. The Godot game engine supports and recommends the glTF format, with both import and export support. Open-source glTF converters are available from COLLADA, FBX, and OBJ. Assimp can import and export glTF. glTF files can also be directly exported from a variety of 3D editors, such as Blender, Unity (using the glTFast importer/exporter), Freecad, Vectary, Autodesk 3ds Max (natively or using Verge3D exporter), Autodesk Maya (using babylon.js exporter), Autodesk Inventor, Modo, Houdini, Paint 3D, Godot, and Substance Painter. Open-source glTF utility libraries are available for programming languages including JavaScript, Node.js, C++, C#, Python, Haskell, Java, Go, Rust, Haxe, Ada, and TypeScript. Khronos keeps a list of these libraries and other related applications on their ecosystem site. The Khronos 3D Commerce Working Group released Asset Creation Guidelines in 2020 outlining best practices for use of the glTF file format in 3D Commerce. In 2025, the Working Group launched Asset Creation Guidelines 2.0, a continuously updated resource with additional guidance for geometry, mesh optimization, UV maps, textures, materials/PBR performance, and web optimization. The Khronos PBR Neutral Tone Mappers specification is a tone mapper designed to faithfully reproduce an object's base color, hue, and saturation when using PBR rendering under grayscale lighting, supporting brand- and product-accurate color representation. Khronos maintains the glTF Asset Auditor to allow retailers and advertising technology platforms to validate 3D assets against either a default Audit Profile modelled on the 2020 3D Commerce Asset Creation Guidelines or a custom profile defined by the target application.
Read more →
Flat-panel display

A flat-panel display (FPD) is an electronic display used to display visual content such as text or images. It is present in consumer, medical, transportation, and industrial equipment. Flat-panel displays are thin, lightweight, provide better linearity and are capable of higher resolution and contrast than typical consumer-grade TVs from earlier eras. They are usually less than 10 centimetres (3.9 in) thick. While the highest resolution for consumer-grade CRT televisions is 1080i, many interactive flat panels in the 2020s are capable of 1080p and 4K resolution. In the 2010s, portable consumer electronics such as laptops, mobile phones, and portable cameras have used flat-panel displays since they consume less power and are lightweight. As of 2016, flat-panel displays have almost completely replaced CRT displays. Most 2010s-era flat-panel displays use LCD or light-emitting diode (LED) technologies, sometimes combined. Most LCD screens are back-lit with color filters used to display colors. In many cases, flat-panel displays are combined with touch screen technology, which allows the user to interact with the display in a natural manner. For example, modern smartphone displays often use OLED panels, with capacitive touch screens. Flat-panel displays can be divided into two display device categories: volatile and static. The former requires that pixels be periodically electronically refreshed to retain their state (e.g. liquid-crystal displays (LCD)), and can only show an image when it has power. On the other hand, static flat-panel displays rely on materials whose color states are bistable, such as displays that make use of e-ink technology, and as such retain content even when power is removed. == History == The first engineering proposal for a flat-panel TV was by General Electric in 1954 as a result of its work on radar monitors. The publication of their findings gave all the basics of future flat-panel TVs and monitors. But GE did not continue with the R&D required and never built a working flat panel at that time. The first production flat-panel display was the Aiken tube, developed in the early 1950s and produced in limited numbers in 1958. This saw some use in military systems as a heads up display and as an oscilloscope monitor, but conventional technologies overtook its development. Attempts to commercialize the system for home television use ran into continued problems and the system was never released commercially. Dennis Gabor, better known as the inventor of holography, patented a flat-screen CRT in 1958. This was substantially similar to Aiken's concept, and led to a years-long patent battle. By the time the lawsuits were complete, with Aiken's patent applying in the US and Gabor's in the UK, the commercial aspects had long lapsed, and the two became friends. Around this time, Clive Sinclair came across Gabor's work and began an ultimately unsuccessful decade-long effort to commercialize it. The Philco Predicta featured a relatively flat (for its day) cathode-ray tube setup and would be the first commercially released "flat panel" upon its launch in 1958; the Predicta was a commercial failure. The plasma display panel was invented in 1964 at the University of Illinois, according to The History of Plasma Display Panels. === Liquid-crystal displays (LC displays, or LCDs) === The MOSFET (metal–oxide–semiconductor field-effect transistor, or MOS transistor) was invented by Mohamed M. Atalla and Dawon Kahng at Bell Labs in 1959, and presented in 1960. Building on their work, Paul K. Weimer at RCA developed the thin-film transistor (TFT) in 1962. It was a type of MOSFET distinct from the standard bulk MOSFET. The idea of a TFT-based LCD was conceived by Bernard J. Lechner of RCA Laboratories in 1968. B.J. Lechner, F.J. Marlowe, E.O. Nester and J. Tults demonstrated the concept in 1968 with a dynamic scattering LCD that used standard discrete MOSFETs. The first active-matrix addressed electroluminescent display was made using TFTs by T. Peter Brody's Thin-Film Devices department at Westinghouse Electric Corporation in 1968. In 1973, Brody, J. A. Asars and G. D. Dixon at Westinghouse Research Laboratories demonstrated the first thin-film-transistor liquid-crystal display. Brody and Fang-Chen Luo demonstrated the first flat active-matrix liquid-crystal display (AM LCD) using TFTs in 1974. By 1982, pocket LCD TVs based on LCD technology were developed in Japan. The 2.1-inch Epson ET-10 Epson Elf was the first color LCD pocket TV, released in 1984. In 1988, a Sharp research team led by engineer T. Nagayasu demonstrated a 14-inch full-color LCD, which convinced the electronics industry that LCD would eventually replace CRTs as the standard television display technology. As of 2013, all modern high-resolution and high-quality electronic visual display devices use TFT-based active-matrix displays. === LED displays === The first usable LED display was developed by Hewlett-Packard (HP) and introduced in 1968. It was the result of research and development (R&D) on practical LED technology between 1962 and 1968, by a research team under Howard C. Borden, Gerald P. Pighini, and Mohamed M. Atalla, at HP Associates and HP Labs. In February 1969, they introduced the HP Model 5082-7000 Numeric Indicator. It was the first alphanumeric LED display, and was a revolution in digital display technology, replacing the Nixie tube for numeric displays and becoming the basis for later LED displays. In 1977, James P Mitchell prototyped and later demonstrated what was perhaps the earliest monochromatic flat-panel LED television display. Ching W. Tang and Steven Van Slyke at Eastman Kodak built the first practical organic LED (OLED) device in 1987. In 2003, Hynix produced an organic EL driver capable of lighting in 4,096 colors. In 2004, the Sony Qualia 005 was the first LED-backlit LCD. The Sony XEL-1, released in 2007, was the first OLED television. == Common types == === Liquid-crystal display (LCD) === Field-effect LCDs are lightweight, compact, portable, cheap, more reliable, and easier on the eyes than CRT screens. LCD screens use a thin layer of liquid crystal, a liquid that exhibits crystalline properties. It is sandwiched between two glass plates carrying transparent electrodes. Two polarizing films are placed at each side of the LCD. By generating a controlled electric field between electrodes, various segments or pixels of the liquid crystal can be activated, causing changes in their polarizing properties. These polarizing properties depend on the alignment of the liquid-crystal layer and the specific field-effect used, being either twisted nematic (TN), in-plane switching (IPS) or vertical alignment (VA). Color is produced by applying appropriate color filters (red, green and blue) to the individual subpixels. LC displays are used in various electronics like watches, calculators, mobile phones, TVs, computer monitors and laptops screens etc. === LED-LCD === Most earlier large LCD screens were back-lit using a number of CCFL (cold-cathode fluorescent lamps). However, small pocket size devices almost always used LEDs as their illumination source. With the improvement of LEDs, almost all new displays are now equipped with LED backlight technology. The image is still generated by the LCD layer. === Plasma panel === A plasma display consists of two glass plates separated by a thin gap filled with a gas such as neon. Each of these plates has several parallel electrodes running across it. The electrodes on the two plates are at right angles to each other. A voltage applied between the two electrodes one on each plate causes a small segment of gas at the two electrodes to glow. The glow of gas segments is maintained by a lower voltage that is continuously applied to all electrodes. By 2010, consumer plasma displays had been discontinued by numerous manufacturers. === Electroluminescent panel === In an electroluminescent display, the image is created by applying electrical signals to the plates which make the phosphor glow. === Organic light-emitting diode === An OLED (organic light-emitting diode) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound which emits light in response to an electric current. This layer of organic semiconductor is situated between two electrodes; typically, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television screens, computer monitors, portable systems such as mobile phones, handheld game consoles and PDAs. === Quantum-dot light-emitting diode === QLED or quantum dot LED is a flat panel display technology introduced by Samsung under this trademark. Other television set manufacturers such as Sony have used the same technology to enhance the backlighting of LCD TVs already in 2013. Quantum dots create their own unique light when illuminated by a light source of shorter wavelength such as blue LEDs. Th
Read more →
AFNLP

AFNLP (Asian Federation of Natural Language Processing Associations) is the organization for coordinating the natural language processing related activities and events in the Asia-Pacific region. == Foundation == AFNLP was founded on 4 October 2000. == Member Associations == ALTA – Australasian Language Technology Association ANLP Japan Association of Natural Language Processing ROCLING Taiwan ROC Computational Linguistics Society SIG-KLC Korea SIG-Korean Language Computing of Korea Information Science Society == Existing Asian Initiatives == NLPRS: Natural Language Processing Pacific Rim Symposium IRAL: International Workshop on Information Retrieval with Asian Languages PACLING: Pacific Association for Computational Linguistics PACLIC: Pacific Asia Conference on Language, Information and Computation PRICAI: Pacific Rim International Conference on AI ICCPOL: International Conference on Computer Processing of Oriental Languages ROCLING: Research on Computational Linguistics Conference == Conferences == IJCNLP-04: The 1st International Joint Conference on Natural Language Processing in Hainan Island, China IJCNLP-05: The 2nd International Joint Conference on Natural Language Processing in Jeju Island, Korea IJCNLP-08: The 3rd International Joint Conference on Natural Language Processing in Hyderabad, India ACL-IJCNLP-2009: Joint Conference of the 47th Annual Meeting of the Association for Computational Linguistics (ACL) and 4th International Joint Conference on Natural Language Processing (IJCNLP) in Singapore IJNCLP-11: The 5th International Joint Conference on Natural Language Processing in Chiang Mai, Thailand
Read more →
Artificial Intelligence for Digital Response

Artificial Intelligence for Digital Response (AIDR) is a free and open source platform to filter and classify social media messages related to emergencies, disasters, and humanitarian crises. It has been developed by the Qatar Computing Research Institute and awarded the Grand Prize for the 2015 Open Source Software World Challenge. Muhammad Imran stated that he and his team "have developed novel computational techniques and technologies, which can help gain insightful and actionable information from online sources to enable rapid decision-making" - according to him the system "combines human intelligence with machine learning techniques, to solve many real-world challenges during mass emergencies and health issues". == How to use == It can be used by logging in with ones Twitter credentials and by collecting tweets by specifying keywords or hashtags, like #ChileEarthquake, and possibly a geographical region as well. == Use == It has been deployed in conjunction with UNICEF in Zambia to classify short messages related to AIDS/HIV received through the U-Report platform. AIDR was used for the first time during the 2010 Pakistan floods. The first real test of AIDR took place during the 2014 Iquique earthquake in Chile. == Related talks and events == Muhammad Imran delivered a keynote talk on the science behind the AIDR system at the International Conference on Information Systems for Crisis Response And Management (ISCRAM). Abdelkader Lattab and Ji Lucas also presented the system at the 2016 QCRI-IBM Data Science Connect event.
Read more →
Digital studio

A digital studio provides both a technology-equipped space and technological/rhetorical support to students (commonly at a university) working individually or in groups on a variety of digital projects, such as designing a website, developing an electronic portfolio for a class, creating a blog, making edits, selecting images for a visual essay, or writing a script for a podcast. == History/theory == === Overview === Digital Studios are places with different names but similar objectives. They have risen in response to the need for resources dedicated to improving students' interactions with digital technologies for rhetorical ends. Digital Studios have often been theoretically and administratively linked to writing centers, which are sites where students can seek assistance with their text-based projects. The academic term that has been used for this kind of site (i.e. a writing center with a focus on digital and new media) is multiliteracy center. Besides having a multimodal focus, Digital Studios also make a departure from writing center model in allowing students the freedom to work in the Studio without one-on-one interaction with a writing tutor. === The rise of technology === ==== Computer literacy in popular culture ==== As early as 1983, computer literacy was being hailed in The New York Times as the "new goal in schools." As computer technology became more ubiquitous, and the World Wide Web became more popular and accessible, and as the teaching of computer skills became official US policy with the enactment of the "Technology Literacy Challenge" by the Clinton Administration in 1996, educators across disciplines began to investigate with renewed vigor the role of computer technology in curriculum as both a means and an end. ==== Scholarly interest in 'multiliteracies' ==== The same year that President Clinton initiated the "Technology Literacy Challenge", the New London Group (NLG) issued a call for scholars of literacy pedagogy to account for the burgeoning variety of text forms associated with information and multimedia technologies. This includes understanding and competent control of representational forms that are becoming increasingly significant in the overall communications environment, such as visual images and their relationship to the written word – for instance, visual design in desktop publishing or the interface of visual and linguistic meaning in multimedia. This account for new text forms, combined with a similar account for "increasingly globalized societies," is called 'multiliteracies' by the NLG. ==== Technological literacy in rhetoric and composition ==== Two years later, during the 1998 CCCC Chair's Address, Cynthia Selfe (who founded the peer-reviewed journal Computers and Composition in 1983) addressed professionals in the field of Rhetoric and Composition with an objective similar to that of the NLG, arguing that as a field, composition scholars had "paid technology issues precious little focused attention over the years." She called this lack of attention "dangerously shortsighted." What was needed, Selfe claimed, was for teachers to "pay attention" to "how technology is now inextricably linked with literacy and literacy education in this country." In a way, Selfe's call marked the beginning of a new scholarly interest in what Selfe called "critical technological literacy": Composition teachers, language arts teachers, and other literacy specialists need to recognize that the relevance of technology in the English studies disciplines is not simply a matter of helping students work effectively with communication software and hardware, but, rather, also a matter of helping them to understand and to be able to assess – to pay attention to – the social, economic, and pedagogical implications of new communication technologies and technological initiatives that affect their lives. Scholars who took up this call included Barbara Blakely Duffelmeyer, who conducted studies involving the incorporation of "critical computer literacy" (an adaptation of Selfe's term) into first-year composition. ==== Communications across media, inside and outside school ==== The years following Selfe's address saw more rapid advancements in mobile technologies, social media, and Web 2.0, creating even more new venues of composing for teachers to pay attention to. In her own CCCC Chair's Address in 2004, Kathleen Blake Yancey cited these new venues in her argument as a "new curriculum for the 21st century," one that would bring "together the writing outside of school and that of inside." Such a curriculum, she said: is located in a new vocabulary, a new set of practices, and a new set of outcomes; it will focus our research in new and provocative ways; it has as its goal the creation of thoughtful, informed, technologically adept writing publics. A professor at Clemson at the time of her speech, Yancey also argued for the creation of an undergraduate major in composition and rhetoric. She soon moved to Florida State University, where she helped to establish a new major in line with the one she argued for at CCCC called Editing, Writing, and Media (EWM). As teachers and administrators across the country looked to incorporate more digital technology into their curriculum, the need for spaces for digital composition and for support with the innumerable digital composing platforms became apparent. A Digital Studio is one such space. === Link with writing centers === With the need for support for students who would engage with digital writing and multimedia projects, professionals involved with work in writing centers began to draw comparisons between their traditional work — assisting students with alphabetic texts on the page — and a new kind of work: assisting students with their multimedia projects on the screen. John Trimbur predicted in 2000: My guess is that writing centers will more and more define themselves as multiliteracy centers. Many are already doing so – tutoring oral presentations, adding online tutorials, offering workshops in evaluating web sources, and being more conscious of document design. To my mind, new digital literacies will increasingly be incorporated into writing centers not just as sources of information or delivery systems for tutoring but as productive arts in their own right, and writing center work will, if anything, become more rhetorical in paying attention to the practices and effects of design in written and visual communication — more product-oriented and perhaps less like the composing conferences of the process movement. Later, just months before Yancey delivered her CCCC Chair's Address, Michael Pemberton, writing in the Writing Center Journal, asked: As we enter an era when electronic publishing and computer-mediated discourse are the norm, an era when new literary genres and new forms of communication emerge on, seemingly, a weekly basis, we must ask ourselves whether writing centers should continue to dwell exclusively in the linear, non-linked world of the printed page or whether they should plan to redefine themselves – and retrain themselves – to take residence in the emerging world of multimedia, hyperlinked, digital documents. To put it plainly, should we be preparing tutors to conference with students about hypertexts? Pemberton also surveyed (by his account) the forty-year history of how "writing centers [have] viewed new technologies," observing that "the relationship between writing centers and computer technology has been, overall, only a cordial one." Pemberton's article is evidence of the continuing discussion among writing center professionals about the need for support for students' digital creations, support which they saw as analogous to work in writing centers. In 2010, a collection edited by David Sheridan and James Inman, Multiliteracy Centers: Writing Center Work, New Media, and Multimodal Rhetoric, was published. Many of the chapters therein cite the above Trimbur and Pemberton quotes as they work to explain the exigence for the collection, the instances in which multiliteracy centers have been established (the founding of the Clemson Class of 1941 Studio for Student Communication is the subject of two chapters), and both theoretical and practical analyses of potential futures of such work. === 'Studio' vs. 'Center:' A break from the model === The conflation of digital studios and writing centers into multiliteracy centers is helpful in some respects, for example, administratively the two may be managed in similar ways and staffed by the same people. In other respects, it has been said that it is better to separate them into two distinct kinds of facilities. The very choice of naming a "writing center" or "digital studio" by either (or another) title, for instance, ought (according to some) to be informed by what kinds of student-activities are expected to take place there. A writing center is a place for individual students to seek help from individual writing
Read more →
Digital image correlation for electronics

Digital image correlation analyses have applications in material property characterization, displacement measurement, and strain mapping. As such, DIC is becoming an increasingly popular tool when evaluating the thermo-mechanical behavior of electronic components and systems. == CTE measurements and glass transition temperature identification == The most common application of DIC in the electronics industry is the measurement of coefficient of thermal expansion (CTE). Because it is a non-contact, full-field surface technique, DIC is ideal for measuring the effective CTE of printed circuit boards (PCB) and individual surfaces of electronic components. It is especially useful for characterizing the properties of complex integrated circuits, as the combined thermal expansion effects of the substrate, molding compound, and die make effective CTE difficult to estimate at the substrate surface with other experimental methods. DIC techniques can be used to calculate average in-plane strain as a function of temperature over an area of interest during a thermal profile. Linear curve-fitting and slope calculation can then be used to estimate an effective CTE for the observed area. Because the driving factor in solder fatigue is most often the CTE mismatch between a component and the PCB it is soldered to, accurate CTE measurements are vital for calculating printed circuit board assembly (PCBA) reliability metrics. DIC is also useful for characterizing the thermal properties of polymers. Polymers are often used in electronic assemblies as potting compounds, conformal coatings, adhesives, molding compounds, dielectrics, and underfills. Because the stiffness of such materials can vary widely, accurately determining their thermal characteristics with contact techniques that transfer load to the specimen, such as dynamic mechanical analysis (DMA) and thermomechanical analysis (TMA), is difficult to do with consistency. Accurate CTE measurements are important for these materials because, depending on the specific use case, expansion and contraction of these materials can drastically affect solder joint reliability. For example, if a stiff conformal coating or other polymeric encapsulation is allowed to flow under a QFN, its expansion and contraction during thermal cycling can add tensile stress to the solder joints and expedite fatigue failure. DIC techniques will also allow the detection of glass transition temperature (Tg). At a glass transition temperature, the strain vs. temperature plot will exhibit a change in slope. Determining the Tg is very important for polymeric materials that could have glass transition temperatures within the operating temperature range of the electronics assemblies and components on which they are used. For example, some potting materials can see the Elastic Modulus of the material change by a factor of 100 or more over the glass transition region. Such changes can have drastic effects on an electronic assembly's reliability if they are not planned for in the design process. == Out-of-plane component warpage == When 3D DIC techniques are employed, out-of-plane motion can be tracked in addition to in-plane motion. Out-of-plane warpage is especially of interest at the component level of electronics packaging for solder joint reliability quantification. Excessive warpage during reflow can contribute to defective solder joints by lifting the edges of the component away from the board and creating head-in-pillow defects in ball grid arrays (BGA). Warpage can also shorten the fatigue life of adequate joints by adding tensile stresses to edge joints during thermal cycling. == Thermo-mechanical strain mapping == When a PCBA is over-constrained, thermo-mechanical stress brought about during thermal expansion can cause board strains that could negatively affect individual component and overall assembly reliability. The full-field monitoring capabilities of an image correlation technique allow for the measurement of strain magnitude and location on the surface of a specimen during a displacement-causing event, such as PCBA during a thermal profile. These "strain maps" allow for the comparison of strain levels over full areas of interest. Many traditional discrete methods, like extensometers and strain gauges, only allow for localized measurements of strain, inhibiting their ability to efficiently measure strain across larger areas of interest. DIC techniques have also been used to generate strain maps from purely mechanical events, such as drop impact tests, on electronic assemblies.
Read more →
Grammar checker

A grammar checker, in computing terms, is a program, or part of a program, that attempts to verify written text for grammatical correctness. Grammar checkers are most often implemented as a feature of a larger program, such as a word processor, but are also available as a stand-alone application that can be activated from within programs that work with editable text. The implementation of a grammar checker makes use of natural language processing. == History == The earliest "grammar checkers" were programs that checked for punctuation and style inconsistencies, rather than a complete range of possible grammatical errors. The first system was called Writer's Workbench, and was a set of writing tools included with Unix systems as far back as the 1970s. The whole Writer's Workbench package included several separate tools to check for various writing problems. The "diction" tool checked for wordy, trite, clichéd or misused phrases in a text. The tool would output a list of questionable phrases and provide suggestions for improving the writing. The "style" tool analyzed the writing style of a given text. It performed a number of readability tests on the text and output the results, and gave some statistical information about the sentences of the text. Aspen Software of Albuquerque, New Mexico released the earliest version of a diction and style checker for personal computers, Grammatik, in 1981. Grammatik was first available for a Radio Shack - TRS-80, and soon had versions for CP/M and the IBM PC. Reference Software International of San Francisco, California, acquired Grammatik in 1985. Development of Grammatik continued, and it became an actual grammar checker that could detect writing errors beyond simple style checking. Other early diction and style checking programs included Punctuation & Style, Correct Grammar, RightWriter and PowerEdit. While all the earliest programs started as simple diction and style checkers, all eventually added various levels of language processing, and developed some level of true grammar checking capability. Until 1992, grammar checkers were sold as add-on programs. There were a large number of different word processing programs available at that time, with WordPerfect and Microsoft Word the top two in market share. In 1992, Microsoft decided to add grammar checking as a feature of Word, and licensed CorrecText, a grammar checker from Houghton Mifflin that had not yet been marketed as a standalone product. WordPerfect answered Microsoft's move by acquiring Reference Software, and the direct descendant of Grammatik is still included with WordPerfect. As of 2019, grammar checkers are built into systems like Google Docs, browser extensions like Grammarly and Qordoba, desktop applications like Ginger, free and open-source software like LanguageTool, and text editor plugins like those available from WebSpellChecker Software. == Technical issues == The earliest writing style programs checked for wordy, trite, clichéd, or misused phrases in a text. This process was based on simple pattern matching. The heart of the program was a list of many hundreds or thousands of phrases that are considered poor writing by many experts. The list of questionable phrases included alternative wording for each phrase. The checking program would simply break text into sentences, check for any matches in the phrase dictionary, flag suspect phrases and show an alternative. These programs could also perform some mechanical checks. For example, they would typically flag doubled words, doubled punctuation, some capitalization errors, and other simple mechanical mistakes. True grammar checking is more complex. While a programming language has a very specific syntax and grammar, this is not so for natural languages. One can write a somewhat complete formal grammar for a natural language, but there are usually so many exceptions in real usage that a formal grammar is of minimal help in writing a grammar checker. One of the most important parts of a natural language grammar checker is a dictionary of all the words in the language, along with the part of speech of each word. The fact that a natural word may be used as any one of several parts of speech (such as "free" being used as an adjective, adverb, noun, or verb) greatly increases the complexity of any grammar checker. A grammar checker will find each sentence in a text, look up each word in the dictionary, and then attempt to parse the sentence into a form that matches a grammar. Using various rules, the program can then detect various errors, such as agreement in tense, number, word order, and so on. It is also possible to detect some stylistic problems with the text. For example, some popular style guides such as The Elements of Style deprecate excessive use of the passive voice. Grammar checkers may attempt to identify passive sentences and suggest an active-voice alternative. The software elements required for grammar checking are closely related to some of the development issues that need to be addressed for speech recognition software. In voice recognition, parsing can be used to help predict which word is most likely intended, based on part of speech and position in the sentence. In grammar checking, the parsing is used to detect words that fail to follow accepted grammar usage. Recently, research has focused on developing algorithms which can recognize grammar errors based on the context of the surrounding words. == Criticism == Grammar checkers are considered a type of foreign language writing aid which non-native speakers can use to proofread their writings as such programs endeavor to identify syntactical errors. However, as with other computerized writing aids such as spell checkers, popular grammar checkers are often criticized when they fail to spot errors and incorrectly flag correct text as erroneous. The linguist Geoffrey K. Pullum argued in 2007 that they were generally so inaccurate as to do more harm than good: "for the most part, accepting the advice of a computer grammar checker on your prose will make it much worse, sometimes hilariously incoherent."
Read more →
MIDI Show Control

MIDI Show Control (MSC), is a real-time System Exclusive extension of the international Musical Instrument Digital Interface (MIDI) standard. MSC enables all types of entertainment equipment to communicate with each other through the process of show control. The MIDI Show Control protocol is a technical standard ratified by the MIDI Manufacturers Association in 1991, which allows entertainment control devices to talk with each other and with computers to perform show control functions in live and prerecorded entertainment applications. Just like musical MIDI, MSC does not transmit the actual show media - it simply transmits digital information about a multimedia performance. == How MSC works == When any cue is called by a user (typically a stage manager) and/or preprogrammed timeline in a show control software application, the show controller transmits one or more MSC messages from its 'MIDI Out' port. A typical MSC message sequence is: the user has just called a cue the cue is for lighting device 3 the cue is number 45.8 the cue is in cue list 7 MSC messages are serially transmitted in the same way as musical messages and are fully compatible with all conventional MIDI hardware; however, many modern MSC devices now use Ethernet communications for higher bandwidth and the flexibility afforded by networks. Other performance parameters are also transmitted, such as lighting desk submaster settings using MSC SET messages. All cues that a media control device is capable of playing are assigned MSC messages within the Show Controller's cue list and they are transmitted from its MIDI Out port at the appropriate show time, depending on the actions of the user and the show controller's internally timed sequences. All MSC-compatible instruments follow the MSC specification and thus transmit identical MSC messages for identical MSC events, such as the playing of a certain cue on the media controller. Since they follow a published standard, all MSC devices can communicate with and understand each other, as well as with computers that have been programmed to understand MSC messages using the MSC Command Set. All MSC compatible instruments have a built-in MIDI interface and many now follow one of the various MIDI-over-Ethernet protocols. == History == To create the MSC spec, Charlie Richmond headed the USITT MIDI Forum on their Callboard Network in 1990, which included developers and designers from the theatre sound and lighting industry from around the world. It is believed that this was the first international standard to be developed without a single physical meeting of the participants. This Forum created the MSC standard between January and September 1990. This was ratified by the MIDI Manufacturers Association (MMA) in January 1991, and the Japan MIDI Standards Committee (JMSC) later that year, becoming a part of the standard MIDI specification in August 1991. The first show to fully use the MSC specification was the Magic Kingdom Parade at Walt Disney World's Magic Kingdom in September 1991. == MIDI Show Control software ==
Read more →
Digital signal

A digital signal is a signal that represents data as a sequence of discrete values; at any given time it can only take on, at most, one of a finite number of values. This contrasts with an analog signal, which represents continuous values; at any given time it represents a real number within an infinite set of values. Simple digital signals represent information in discrete bands of levels. All levels within a band of values represent the same information state. In most digital circuits, the signal can have two possible valid values; this is called a binary signal or logic signal. They are represented by two voltage bands: one near a reference value (typically termed as ground or zero volts), and the other a value near the supply voltage. These correspond to the two values zero and one (or false and true) of the Boolean domain, so at any given time a binary signal represents one binary digit (bit). Because of this discretization, relatively small changes to the signal levels do not leave the discrete envelope, and as a result are ignored by signal state sensing circuitry. As a result, digital signals have noise immunity; electronic noise, provided it is not too great, will not affect digital circuits, whereas noise always degrades the operation of analog signals to some degree. Digital signals having more than two states are occasionally used; circuitry using such signals is called multivalued logic. For example, signals that can assume three possible states are called three-valued logic. In a digital signal, the physical quantity representing the information may be a variable electric current or voltage, the intensity, phase or polarization of an optical or other electromagnetic field, acoustic pressure, the magnetization of a magnetic storage media, etcetera. Digital signals are used in all digital electronics, notably computing equipment and data transmission. == Definitions == The term digital signal has related definitions in different contexts. === In digital electronics === In digital electronics, a digital signal is a pulse amplitude modulated signal, i.e., a sequence of fixed-width electrical pulses or light pulses, each occupying one of a discrete number of levels of amplitude. A special case is a logic signal or a binary signal, which varies between a low and a high signal level. The pulse trains in digital circuits are typically generated by metal–oxide–semiconductor field-effect transistor (MOSFET) devices, due to their rapid on–off electronic switching speed and large-scale integration (LSI) capability. In contrast, bipolar junction transistors more slowly generate signals resembling sine waves. === In signal processing === In digital signal processing, a digital signal is a representation of a physical signal that is sampled and quantized. A digital signal is an abstraction that is discrete in time and amplitude. The signal's value only exists at regular time intervals, since only the values of the corresponding physical signal at those sampled moments are significant for further digital processing. The digital signal is a sequence of codes drawn from a finite set of values. The digital signal may be stored, processed or transmitted physically as a pulse-code modulation (PCM) signal. === In communications === In digital communications, a digital signal is a continuous-time physical signal, alternating between a discrete number of waveforms, representing a bitstream. The shape of the waveform depends on the transmission scheme, which may be either a line coding scheme allowing baseband transmission; or a digital modulation scheme, allowing passband transmission over long wires or over a limited radio frequency band. Such a carrier-modulated sine wave is considered a digital signal in literature on digital communications and data transmission, but considered as a bit stream converted to an analog signal in specific cases where the signal will be carried over a system meant for analog communication, such as an analog telephone line. In communications, sources of interference are usually present, and noise is frequently a significant problem. The effects of interference are typically minimized by filtering off interfering signals as much as possible and by using data redundancy. The main advantages of digital signals for communications are often considered to be noise immunity, and the ability, in many cases such as with audio and video data, to use data compression to greatly decrease the bandwidth that is required on the communication media. == Logic voltage levels == A waveform that switches representing the two states of a Boolean value (0 and 1, or low and high, or false and true) is referred to as a digital signal or logic signal or binary signal when it is interpreted in terms of only two possible digits. The two states are usually represented by some measurement of an electrical property: Voltage is the most common, but current is used in some logic families. Two ranges of voltages are typically defined for each logic family, which are frequently not directly adjacent. The signal is low when in the low range and high when in the high range, and in between the two ranges the behavior can vary between different types of gates. The clock signal is a special digital signal that is used to synchronize many digital circuits. The image shown can be considered the waveform of a clock signal. Logic changes are triggered either by the rising edge or the falling edge. The rising edge is the transition from a low voltage (level 1 in the diagram) to a high voltage (level 2). The falling edge is the transition from a high voltage to a low one. Although in a highly simplified and idealized model of a digital circuit, we may wish for these transitions to occur instantaneously, no real-world circuit is purely resistive, and therefore no circuit can instantly change voltage levels. This means that during a short, finite transition time, the output may not properly reflect the input, and will not correspond to either a logically high or low voltage. == Modulation == To create a digital signal, a signal must be modulated with a control signal to produce it. The simplest modulation, a type of unipolar encoding, is simply to switch on and off a DC signal so that high voltages represent a '1' and low voltages are '0'. In digital radio schemes, one or more carrier waves are amplitude, frequency or phase modulated by the control signal to produce a digital signal suitable for transmission. Asymmetric Digital Subscriber Line (ADSL) over telephone wires, does not primarily use binary logic; the digital signals for individual carriers are modulated with different-valued logics, depending on the Shannon capacity of the individual channel. == Clocking == Digital signals may be sampled by a clock signal at regular intervals by passing the signal through a flip-flop. When this is done, the input is measured at the clock edge and the signal from that time. The signal is then held steady until the next clock. This process is the basis of synchronous logic. Asynchronous logic also exists, which uses no single clock, and generally operates more quickly, and may use less power, but is significantly harder to design.
Read more →