AI Data House (smc-pvt) Ltd

AI Data House (smc-pvt) Ltd — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Packed pixel

In packed pixel or chunky framebuffer organization, the bits defining each pixel are clustered and stored consecutively. For example, if there are 16 bits per pixel, each pixel is represented in two consecutive (contiguous) 8-bit bytes in the framebuffer. If there are 4 bits per pixel, each framebuffer byte defines two pixels, one in each nibble. The latter example is as opposed to storing a single 4-bit pixel in a byte, leaving 4 bits of the byte unused. If a pixel has more than one channel, the channels are interleaved when using packed pixel organization. Packed pixel displays were common on early microcomputer system that shared a single main memory for both the central processing unit (CPU) and display driver. In such systems, memory was normally accessed a byte at a time, so by packing the pixels, the display system could read out several pixels worth of data in a single read operation. Packed pixel is one of two major ways to organize graphics data in memory, the other being planar organization, where each pixel is made of individual bits stored in their own plane. For a 4-bit color value, memory would be organized as four screen-sized planes of one bit each and a single pixel's value built up by selecting the appropriate bit from each plane. Planar organization has the advantage that the data can be accessed in parallel, and is used when memory bandwidth is an issue.
Read more →
Opponent process

The opponent process is a hypothesis of color vision that states that the human visual system interprets information about color by processing signals from the three types of photoreceptor cells in an antagonistic manner. The three types of cones are called L, M, and S. The names stand for "Long wavelength sensitive,” "middle wavelength sensitive," and "short wavelength sensitive." The opponent-process theory implicates three opponent channels: L versus M, S versus (L+M), and a luminance channel (+ versus -). These cone-opponent mechanisms were at one time thought to be the neural substrate for a psychological theory called Hering's Opponent Colors Theory, which calls for three psychologically important opponent color processes: red versus green, blue versus yellow, and black versus white (luminance). The Opponent Colors Theory is named for the German physiologist Ewald Hering who proposed the idea in the late 19th century. However, it has been argued that Hering’s Opponent Colors Theory lacks adequate phenomenological and empirical support, and may not be a necessary feature of normal human color experience. Correspondingly, considerable physiological and behavioral evidence proves that the physiological cone opponent mechanisms do not constitute the neurobiological basis for Hering's Opponent Colors Theory. == Color theory == === Complementary colors === When staring at a bright color for a while (e.g. red), then looking away at a white field, an afterimage is perceived, such that the original color will evoke its complementary color (cyan, in the case of red input). When complementary colors are combined or mixed, they "cancel each other out" and become neutral (white or gray). That is, complementary colors are never perceived as a mixture; there is no "greenish red" or "yellowish blue", despite claims to the contrary. The strongest color contrast that a color can have is its complementary color. Complementary colors may also be called "opposite colors" and they were originally considered the primary evidence in support of Hering's Opponent Colors Theory. There are two fatal problems with this evidence. First, the complement of red is not green, as called for by Hering's theory; it is bluish-green. And second, there exists a complementary color for every color, so there is nothing special about the set of complementary pairs picked out by Hering's theory. === Unique hues === The colors that define the extremes for each opponent channel are called unique hues, as opposed to composite (mixed) hues. Ewald Hering first defined the unique hues as red, green, blue, and yellow, and based them on the concept that these colors could not be simultaneously perceived. For example, a color cannot appear both red and green. These definitions have been experimentally refined and are represented today by average hue angles of 353° (carmine red), 128° (cobalt green), 228° (cobalt blue), 58° (yellow). The unique hues are a defining feature of many psychological color spaces, but there is substantial evidence showing that the unique hues are not hard wired in the nervous system, contrary to the stipulations of Hering's Opponent Colors Theory. Unique hues can differ between individuals and are often used in psychophysical research to measure variations in color perception due to color-vision deficiencies or color adaptation. While there is considerable inter-subject variability when defining unique hues experimentally, an individual's unique hues are very consistent, to within a few nanometers of wavelength. == Physiological basis == === Relation to LMS color space === The trichromatic theory is in conflict with Hering's Opponent Colors Theory, although it is compatible with a physiological opponent process that compares the outputs of the different classes of cone types. The poles of these cone opponent mechanisms do not correspond to the unique hues of Hering's Opponent Colors Theory and unlike the unique hues, have no privilege in color perception. Most humans have three different cone cells in their retinas that facilitate trichromatic color vision. Colors are determined by the proportional excitation of these three cone types, i.e. their quantum catch. The levels of excitation of each cone type are the parameters that define LMS color space. To calculate the opponent process tristimulus values from the LMS color space, the cone excitations must be compared: The luminous (achromatic) opponent channel is a weighted sum of all three cone cells (plus the rod cells in some conditions). The red–green opponent channel is equal to the difference of the L- and M-cones. The blue–yellow opponent channel is equal to the difference of the S-cone and the average/weighted sum of the L- and M-cones. Most mammals have no L cone (the primate L cone arose from a gene duplication of the M cone opsin gene). These mammals still show two kinds of opponent channels in their retinal ganglion cells: the achromatic channel and the blue-yellow opponency channel. === Cone opponent mechanisms are encoded in the retina === The output of different types of cones are compared by cells in the retina including retina bipolar cells (which compare signals from L and M cones) and bistratified retinal ganglion cells (which compare S cone signals with L and M cone signals). The output of bipolar cells is relayed to the visual cortex by the retinal ganglion cells (RGCs) by way of a thalamic relay station called the lateral geniculate nucleus (LGN) of the thalamus. Much of the scientific knowledge of retinal ganglion cell physiology was obtained by neural recordings of cells in the LGN. The cone-opponent mechanisms in the retina and LGN represent a fundamental physiological opponent process but do not represent the unique hues (or Hering's Opponent Colors Theory). For example, the colors that best elicit responses of the bistratified S-(L+M)-opponent neurons are best described as purplish (or lavender) and lime-green, not "blue" and "yellow". The neurons are sometimes referred to as "blue–yellow" neurons, but this is a historical artifact dating to the time when it was thought that Hering's Opponent Colors Theory was hardwired by the retina and the mismatch between the colors to which they are optimally tuned and Hering's Opponent Colors was overlooked. Cone opponent mechanisms exist in the retinas of many mammals, including monkeys, mice, and cats. In primates, the LGN contains three major classes of layers: Magnocellular layers (M, large-cell) – responsible largely for the luminance channel Parvocellular layers (P, small-cell) – responsible largely for red–green opponency Koniocellular layers (K) – responsible largely for blue–yellow opponency, poor spatial resolution, long latency Other mammals such as cats also have three cell types denoted as X (magno), Y (parvo), and W (konio). The W type is beyond most doubt homologous to the primate K type. There are some subtle differences between the M and X types as well as the Y and P types to make the correspondence unclear. === Advantage === Transmitting information in opponent-channel color space could be advantageous over transmitting it in LMS color space ("raw" signals from each cone type). There is some overlap in the wavelengths of light to which the three types of cones (L for long-wave, M for medium-wave, and S for short-wave light) respond, so it is more efficient for the visual system (from a perspective of dynamic range) to record differences between the responses of cones, rather than each type of cone's individual response. Hurvich and Jameson argued that the use of opponent-channel color space would increase color contrast, making the information easier to process by later stages of vision. === Color blindness === Color blindness can be classified by the cone cell that is affected (protan, deutan, tritan) or by the opponent channel that is affected (red–green or blue–yellow). In either case, the channel can either be inactive (in the case of dichromacy) or have a lower dynamic range (in the case of anomalous trichromacy). For example, individuals with deuteranopia see little difference between the red and green unique hues. == History == Johann Wolfgang von Goethe first studied the physiological effect of opposed colors in his Theory of Colours in 1810. Goethe arranged his color wheel symmetrically "for the colours diametrically opposed to each other in this diagram are those which reciprocally evoke each other in the eye. Thus, yellow demands purple; orange, blue; red, green; and vice versa: Thus again all intermediate gradations reciprocally evoke each other." Ewald Hering proposed opponent color theory in 1892. He thought that the colors red, yellow, green, and blue are special in that any other color can be described as a mix of them, and that they exist in opposite pairs. That is, either red or green is perceived and never greenish-red: Even though yellow is a mixture of red and green in the RGB color theory, humans
Read more →
List of 3D rendering software

3D rendering software products are the dedicated engines used for rendering computer-generated imagery. This is not the same as 3D modeling software, which involves the creation of 3D models, for which the software listed below can produce realistically rendered visualisations.General-purpose packages which can have their own built-in rendering capabilities are not listed here; these can be found in the list of 3D computer graphics software and list of 3D animation software. See 3D computer graphics software for more discussion about the distinctions.
Read more →
Google Tasks

Google Tasks is a task management application developed by Google and included with Google Workspace. Included initially as a feature in Gmail and Google Calendar, Google Tasks launched as a core product with a standalone app in 2018. It is available for Android and iOS, as well as in the right-hand side panel on Google Workspace apps on the web and in Google Calendar. == History and development == Google Tasks began as an integration within other apps in G Suite (now Google Workspace), allowing to-do items to be created in Calendar and Gmail. Upon graduating to a core service on June 28, 2018, Google Tasks launched as a dedicated mobile app in which tasks can be sorted into lists, managed, and completed. Google Tasks launched the ability to create tasks from Google Chat messages in 2022.
Read more →
BeHafizh

BeHafizh is a mobile application to assist in the effort to memorize Qur'anic verses. The software runs on the Android operating system. This application was made by a team from Gadjah Mada University (UGM) consisting of Farid Amin Ridwanto, Rian Adam Rajagede and Alfian Try Putranto in order to participate in the National Student Musabaqoh Tilawatil Quran (MTQ) held at University of Indonesia (UI) on 1- August 8, 2015. This application then won a gold medal in the branch of Computer Application Design in the competition. == Features == === Audio Player === Audio player, paragraph can be played repeatedly, with pause, and can be done on a certain range of Quranic verses. === Memorization Test === Memorization testing continues users to improve their memorization. Memorization Recorders improves user's ability to recite Quran. === Colour indicators === === Achievements === === Reminders ===
Read more →
List of 3D rendering software

3D rendering software products are the dedicated engines used for rendering computer-generated imagery. This is not the same as 3D modeling software, which involves the creation of 3D models, for which the software listed below can produce realistically rendered visualisations.General-purpose packages which can have their own built-in rendering capabilities are not listed here; these can be found in the list of 3D computer graphics software and list of 3D animation software. See 3D computer graphics software for more discussion about the distinctions.
Read more →
Opponent process

The opponent process is a hypothesis of color vision that states that the human visual system interprets information about color by processing signals from the three types of photoreceptor cells in an antagonistic manner. The three types of cones are called L, M, and S. The names stand for "Long wavelength sensitive,” "middle wavelength sensitive," and "short wavelength sensitive." The opponent-process theory implicates three opponent channels: L versus M, S versus (L+M), and a luminance channel (+ versus -). These cone-opponent mechanisms were at one time thought to be the neural substrate for a psychological theory called Hering's Opponent Colors Theory, which calls for three psychologically important opponent color processes: red versus green, blue versus yellow, and black versus white (luminance). The Opponent Colors Theory is named for the German physiologist Ewald Hering who proposed the idea in the late 19th century. However, it has been argued that Hering’s Opponent Colors Theory lacks adequate phenomenological and empirical support, and may not be a necessary feature of normal human color experience. Correspondingly, considerable physiological and behavioral evidence proves that the physiological cone opponent mechanisms do not constitute the neurobiological basis for Hering's Opponent Colors Theory. == Color theory == === Complementary colors === When staring at a bright color for a while (e.g. red), then looking away at a white field, an afterimage is perceived, such that the original color will evoke its complementary color (cyan, in the case of red input). When complementary colors are combined or mixed, they "cancel each other out" and become neutral (white or gray). That is, complementary colors are never perceived as a mixture; there is no "greenish red" or "yellowish blue", despite claims to the contrary. The strongest color contrast that a color can have is its complementary color. Complementary colors may also be called "opposite colors" and they were originally considered the primary evidence in support of Hering's Opponent Colors Theory. There are two fatal problems with this evidence. First, the complement of red is not green, as called for by Hering's theory; it is bluish-green. And second, there exists a complementary color for every color, so there is nothing special about the set of complementary pairs picked out by Hering's theory. === Unique hues === The colors that define the extremes for each opponent channel are called unique hues, as opposed to composite (mixed) hues. Ewald Hering first defined the unique hues as red, green, blue, and yellow, and based them on the concept that these colors could not be simultaneously perceived. For example, a color cannot appear both red and green. These definitions have been experimentally refined and are represented today by average hue angles of 353° (carmine red), 128° (cobalt green), 228° (cobalt blue), 58° (yellow). The unique hues are a defining feature of many psychological color spaces, but there is substantial evidence showing that the unique hues are not hard wired in the nervous system, contrary to the stipulations of Hering's Opponent Colors Theory. Unique hues can differ between individuals and are often used in psychophysical research to measure variations in color perception due to color-vision deficiencies or color adaptation. While there is considerable inter-subject variability when defining unique hues experimentally, an individual's unique hues are very consistent, to within a few nanometers of wavelength. == Physiological basis == === Relation to LMS color space === The trichromatic theory is in conflict with Hering's Opponent Colors Theory, although it is compatible with a physiological opponent process that compares the outputs of the different classes of cone types. The poles of these cone opponent mechanisms do not correspond to the unique hues of Hering's Opponent Colors Theory and unlike the unique hues, have no privilege in color perception. Most humans have three different cone cells in their retinas that facilitate trichromatic color vision. Colors are determined by the proportional excitation of these three cone types, i.e. their quantum catch. The levels of excitation of each cone type are the parameters that define LMS color space. To calculate the opponent process tristimulus values from the LMS color space, the cone excitations must be compared: The luminous (achromatic) opponent channel is a weighted sum of all three cone cells (plus the rod cells in some conditions). The red–green opponent channel is equal to the difference of the L- and M-cones. The blue–yellow opponent channel is equal to the difference of the S-cone and the average/weighted sum of the L- and M-cones. Most mammals have no L cone (the primate L cone arose from a gene duplication of the M cone opsin gene). These mammals still show two kinds of opponent channels in their retinal ganglion cells: the achromatic channel and the blue-yellow opponency channel. === Cone opponent mechanisms are encoded in the retina === The output of different types of cones are compared by cells in the retina including retina bipolar cells (which compare signals from L and M cones) and bistratified retinal ganglion cells (which compare S cone signals with L and M cone signals). The output of bipolar cells is relayed to the visual cortex by the retinal ganglion cells (RGCs) by way of a thalamic relay station called the lateral geniculate nucleus (LGN) of the thalamus. Much of the scientific knowledge of retinal ganglion cell physiology was obtained by neural recordings of cells in the LGN. The cone-opponent mechanisms in the retina and LGN represent a fundamental physiological opponent process but do not represent the unique hues (or Hering's Opponent Colors Theory). For example, the colors that best elicit responses of the bistratified S-(L+M)-opponent neurons are best described as purplish (or lavender) and lime-green, not "blue" and "yellow". The neurons are sometimes referred to as "blue–yellow" neurons, but this is a historical artifact dating to the time when it was thought that Hering's Opponent Colors Theory was hardwired by the retina and the mismatch between the colors to which they are optimally tuned and Hering's Opponent Colors was overlooked. Cone opponent mechanisms exist in the retinas of many mammals, including monkeys, mice, and cats. In primates, the LGN contains three major classes of layers: Magnocellular layers (M, large-cell) – responsible largely for the luminance channel Parvocellular layers (P, small-cell) – responsible largely for red–green opponency Koniocellular layers (K) – responsible largely for blue–yellow opponency, poor spatial resolution, long latency Other mammals such as cats also have three cell types denoted as X (magno), Y (parvo), and W (konio). The W type is beyond most doubt homologous to the primate K type. There are some subtle differences between the M and X types as well as the Y and P types to make the correspondence unclear. === Advantage === Transmitting information in opponent-channel color space could be advantageous over transmitting it in LMS color space ("raw" signals from each cone type). There is some overlap in the wavelengths of light to which the three types of cones (L for long-wave, M for medium-wave, and S for short-wave light) respond, so it is more efficient for the visual system (from a perspective of dynamic range) to record differences between the responses of cones, rather than each type of cone's individual response. Hurvich and Jameson argued that the use of opponent-channel color space would increase color contrast, making the information easier to process by later stages of vision. === Color blindness === Color blindness can be classified by the cone cell that is affected (protan, deutan, tritan) or by the opponent channel that is affected (red–green or blue–yellow). In either case, the channel can either be inactive (in the case of dichromacy) or have a lower dynamic range (in the case of anomalous trichromacy). For example, individuals with deuteranopia see little difference between the red and green unique hues. == History == Johann Wolfgang von Goethe first studied the physiological effect of opposed colors in his Theory of Colours in 1810. Goethe arranged his color wheel symmetrically "for the colours diametrically opposed to each other in this diagram are those which reciprocally evoke each other in the eye. Thus, yellow demands purple; orange, blue; red, green; and vice versa: Thus again all intermediate gradations reciprocally evoke each other." Ewald Hering proposed opponent color theory in 1892. He thought that the colors red, yellow, green, and blue are special in that any other color can be described as a mix of them, and that they exist in opposite pairs. That is, either red or green is perceived and never greenish-red: Even though yellow is a mixture of red and green in the RGB color theory, humans
Read more →
MoltenVK

MoltenVK is a software library which allows Vulkan applications to run on top of Metal on Apple's macOS, iOS, and tvOS operating systems. It is the first software component to be released for the Vulkan Portability Initiative, a project to have a subset of Vulkan run on platforms lacking native Vulkan drivers. There are some limitations compared with a native Vulkan implementation. == History == MoltenVK was first released as a proprietary and commercially licensed product by The Brenwill Workshop on July 27, 2016. On July 31, 2017, Khronos announced the formation of the Vulkan Portability Technical Subgroup. === Open source === On February 26, 2018, Khronos announced that Vulkan became available on macOS and iOS products through the MoltenVK library. Valve announced that Dota 2 will run on macOS using the Vulkan API with the aid of MoltenVK, and that they had made an arrangement with developer The Brenwill Workshop Ltd to release MoltenVK as open-source software under the Apache License version 2.0. On May 30, 2018, Qt was updated with Vulkan for Qt on macOS using MoltenVK. On May 31, 2018, optional Vulkan support for Dota 2 on macOS was released. Benchmarks for the game were available the following day, showing better performance using Vulkan and MoltenVK compared to OpenGL. On July 20, 2018, Wine was updated with Vulkan support on macOS using MoltenVK. On 29 July 2018, the first app using MoltenVK was accepted onto the App Store, after initially being rejected. On 6 August 2018, Google open-sourced Filament, a crossplatform real-time physically based rendering engine with MoltenVK for macOS/iOS. On November 28, 2018, Valve released Artifact, their first Vulkan-only game on macOS using MoltenVK. === Version 1.0 === On 29 January 2019, MoltenVK 1.0.32 was released with early prototype of Vulkan Portability Extensions. RPCS3 and Dolphin emulators were updated with Vulkan support on macOS using MoltenVK. On 13 April 2019, MoltenVK 1.0.34 was released with support for tessellation. On July 30, 2019, MoltenVK 1.0.36 was released targeting Metal 3.0. On July 31, 2020, MoltenVK 1.0.44 was released, adding support for the tvOS platform. On January 23, 2020, MoltenVK was updated to support for some of the new features of Vulkan 1.2, as of Vulkan SDK 1.2.121. === Version 1.1 === On October 1, 2020, MoltenVK 1.1.0 was released, adding full support for Vulkan 1.1, as of Vulkan SDK 1.2.154. On 9 December 2020, MoltenVK 1.1.1 was released, providing support for Vulkan on Apple silicon GPUs and support for the Mac Catalyst platform for porting iOS/iPadOS apps to macOS. === Version 1.2 === On October 18, 2022, MoltenVK 1.2.0 was released, adding full support for Vulkan 1.2 as of Vulkan SDK 1.3.231. In January 2023, MoltenVK 1.2.2 added support for Vulkan as of SDK 1.3.239, while this version of Vulkan SDK fixed some issues with the interconnectivity with Metal API, while version 1.2.3 supported some additional extensions. === Version 1.3 === On May 1, 2025, MoltenVK 1.3 was released with support for Vulkan 1.3. === Version 1.4 === On August 20, 2025, MoltenVK 1.4 was released with support for Vulkan 1.4.
Read more →
Zardoz (computer security)

In computer security, the Security-Digest list, better known as the Zardoz list, was a semi-private full disclosure mailing list run by Neil Gorsuch from 1989 through 1991. It identified weaknesses in systems and gave directions on where to find them. It was a perennial target for computer hackers, who sought archives of the list for information on undisclosed software vulnerabilities. == Membership restrictions == Access to Zardoz was approved on a case-by-case basis by Gorsuch, principally by reference to the user account used to send subscription requests; requests were approved for root users, valid UUCP owners, or system administrators listed at the NIC. The openness of the list to users other than Unix system administrators was a regular topic of conversation, with participants expressing concern that vulnerabilities and exploitation details disclosed on the list were liable to spread to hackers. The circulation of Zardoz postings was an open secret among computer hackers, and mocked in a Phrack parody of an IRC channel populated by security experts. == Notable participants == Keith Bostic discussed BSD Sendmail vulnerabilities Chip Salzenberg discussed Peter Honeyman's posting of a UUCP worm, and shell script security Gene Spafford discussed VMS and Ultrix bugs, and relayed law enforcement enquiries about the Morris Worm Tom Christiansen discussed SUID shell scripts Chris Torek discussed devising exploits from general descriptions of vulnerabilities Henry Spencer discussed Unix security Brendan Kehoe discussed systems security Alec Muffett announced Crack, the Unix password cracker The majority of Zardoz participants were Unix systems administrators and C software developers. Neil Gorsuch and Gene Spafford were the most prolific contributors to the list.
Read more →
Pixel aspect ratio

A pixel aspect ratio (PAR) is a mathematical ratio that describes how the width of a pixel in a digital image compares to the height of that pixel. Most digital imaging systems display an image as a grid of tiny, square pixels. However, some imaging systems, especially those that must be compatible with standard-definition television motion pictures, display an image as a grid of rectangular pixels, in which the pixel width and height are different. Pixel aspect ratio describes this difference. Use of pixel aspect ratio mostly involves pictures pertaining to standard-definition television and some other exceptional cases. Most other imaging systems, including those that comply with SMPTE standards and practices, use square pixels. PAR is also known as sample aspect ratio and abbreviated SAR, though it can be confused with storage aspect ratio. == Introduction == The ratio of the width to the height of an image is known as the aspect ratio, or more precisely the display aspect ratio (DAR) – the aspect ratio of the image as displayed; for TV, DAR was traditionally 4:3 (a.k.a. fullscreen), with 16:9 (a.k.a. widescreen) now the standard for HDTV. In digital images, there is a distinction with the storage aspect ratio (SAR), which is the ratio of pixel dimensions. If an image is displayed with square pixels, then these ratios agree; if not, then non-square, "rectangular" pixels are used, and these ratios disagree. The aspect ratio of the pixels themselves is known as the pixel aspect ratio (PAR) – for square pixels this is 1:1 – and these are related by the identity: Rearranging (solving for PAR) yields: For example: A 640 × 480 VGA image has a SAR of 640/480 = 4:3, and if displayed on a 4:3 display (DAR = 4:3) has square pixels, hence a PAR of 1:1. By contrast, a 720 × 576 D-1 PAL image has a SAR of 720/576 = 5:4, but if displayed on a 4:3 display (DAR = 4:3) the PAR is 4/3 : 5/4 = 16:15 ≈ 1.066. This means that the pixels of the PAL picture must be "stretched" by this amount to fit in the 4:3 display. In analog images such as film there is no notion of pixel, nor notion of SAR or PAR, but in the digitization of analog images the resulting digital image has pixels, hence SAR (and accordingly PAR, if displayed at the same aspect ratio as the original). Non-square pixels arise often in early digital TV standards, related to digitalization of analog TV signals – whose vertical and "effective" horizontal resolutions differ and are thus best described by non-square pixels – and also in some digital video cameras and computer display modes, such as Color Graphics Adapter (CGA). Today they arise also in transcoding between resolutions with different SARs. Actual displays do not generally have non-square pixels, though digital sensors might; they are rather a mathematical abstraction used in resampling images to convert between resolutions. There are several complicating factors in understanding PAR, particularly as it pertains to digitization of analog video: First, analog video does not have pixels, but rather a raster scan, and thus has a well-defined vertical resolution (the lines of the raster), but not a well-defined horizontal resolution, since each line is an analog signal. However, by a standardized sampling rate, the effective horizontal resolution can be determined by the sampling theorem, as is done below. Second, due to overscan, some of the lines at the top and bottom of the raster are not visible, as are some of the possible image on the left and right – see Overscan: Analog to digital resolution issues. Also, the resolution may be rounded (DV NTSC uses 480 lines, rather than the 486 that are possible). Third, analog video signals are interlaced – each image (frame) is sent as two "fields", each with half the lines. Thus either the pixels are twice as tall as they would be without interlacing, or the image is deinterlaced. == Background == Video is presented as a sequential series of images called video frames. Historically, video frames were created and recorded in analog form. As digital display technology, digital broadcast technology, and digital video compression evolved separately, it resulted in video frame differences that must be addressed using pixel aspect ratio. Digital video frames are generally defined as a grid of pixels used to present each sequential image. The horizontal component is defined by pixels (or samples), and is known as a video line. The vertical component is defined by the number of lines, as in 480 lines. Standard-definition television standards and practices were developed as broadcast technologies and intended for terrestrial broadcasting, and were therefore not designed for digital video presentation. Such standards define an image as an array of well-defined horizontal "Lines", well-defined vertical "Line Duration" and a well-defined picture center. However, there is not a standard-definition television standard that properly defines image edges or explicitly demands a certain number of picture elements per line. Furthermore, analog video systems such as NTSC 480i and PAL 576i, instead of employing progressively displayed frames, employ fields or interlaced half-frames displayed in an interwoven manner to reduce flicker and double the image rate for smoother motion. === Analog-to-digital conversion === As a result of computers becoming powerful enough to serve as video editing tools, video digital-to-analog converters and analog-to-digital converters were made to overcome this incompatibility. To convert analog video lines into a series of square pixels, the industry adopted a default sampling rate at which luma values were extracted into pixels. The luma sampling rate for 480i pictures was 12+3⁄11 MHz and for 576i pictures was 14+3⁄4 MHz. The term pixel aspect ratio was first coined when ITU-R BT.601 (commonly known as Rec. 601) specified that standard-definition television pictures are made of lines of exactly 720 non-square pixels. ITU-R BT.601 did not define the exact pixel aspect ratio but did provide enough information to calculate the exact pixel aspect ratio based on industry practices: The standard luma sampling rate of precisely 13+1⁄2 MHz. Based on this information: The pixel aspect ratio for 480i would be 10:11 as: 12 3 11 ÷ 13 1 2 = 10 11 {\displaystyle 12{\tfrac {3}{11}}\div 13{\tfrac {1}{2}}={\tfrac {10}{11}}} The pixel aspect ratio for 576i would be 59:54 as: 14 3 4 ÷ 13 1 2 = 59 54 {\displaystyle 14{\tfrac {3}{4}}\div 13{\tfrac {1}{2}}={\tfrac {59}{54}}} SMPTE RP 187 further attempted to standardize the pixel aspect ratio values for 480i and 576i. It designated 177:160 for 480i or 1035:1132 for 576i. However, due to significant difference with practices in effect by industry and the computational load that they imposed upon the involved hardware, SMPTE RP 187 was simply ignored. SMPTE RP 187 information annex A.4 further suggested the use of 10:11 for 480i. As of this writing, ITU-R BT.601-6, which is the latest edition of ITU-R BT.601, still implies that the pixel aspect ratios mentioned above are correct. === Digital video processing === As stated above, ITU-R BT.601 specified that standard-definition television pictures are made of lines of 720 non-square pixels, sampled with a precisely specified sampling rate. A simple mathematical calculation reveals that a 704 pixel width would be enough to contain a 480i or 576i standard 4:3 picture: A 4:3 480-line picture, digitized with the Rec. 601-recommended sampling rate, would be 704 non-square pixels wide. x 480 × 10 11 = 4 3 ⇒ x = 480 × 11 × 4 10 × 3 = 704 {\displaystyle {\frac {x}{480}}\times {\frac {10}{11}}={\frac {4}{3}}\Rightarrow x={\frac {480\times 11\times 4}{10\times 3}}=704} A 4:3 576-line picture, digitized with the Rec. 601-recommended sampling rate, would be 702+54⁄59 non-square pixels wide. x 576 × 59 54 = 4 3 ⇒ x = 576 × 54 × 4 59 × 3 = 702 54 59 {\displaystyle {\frac {x}{576}}\times {\frac {59}{54}}={\frac {4}{3}}\Rightarrow x={\frac {576\times 54\times 4}{59\times 3}}=702{\tfrac {54}{59}}} Unfortunately, not all standard TV pictures are exactly 4:3: As mentioned earlier, in analog video, the center of a picture is well-defined but the edges of the picture are not standardized. As a result, some analog devices (mostly PAL devices but also some NTSC devices) generated motion pictures that were horizontally (slightly) wider. This also proportionately applies to anamorphic widescreen (16:9) pictures. Therefore, to maintain a safe margin of error, ITU-R BT.601 required sampling 16 more non-square pixels per line (8 more at each edge) to ensure saving all video data near the margins. This requirement, however, had implications for PAL motion pictures. PAL pixel aspect ratios for standard (4:3) and anamorphic wide screen (16:9), respectively 59:54 and 118:81, were awkward for digital image processing, especially for mixing PAL and NTSC video clips. Therefore, video editing products chose the almost equivalent value
Read more →
Time-compressed speech

Time-compressed speech refers to an audio recording of verbal text in which the text is presented in a much shorter time interval than it would through normally-paced real time speech. The basic purpose is to make recorded speech contain more words in a given time, yet still be understandable. For example: a paragraph that might normally be expected to take 20 seconds to read, might instead be presented in 15 seconds, which would represent a time-compression of 25% (5 seconds out of 20). The term "time-compressed speech" should not be confused with "speech compression", which controls the volume range of a sound, but does not alter its time envelope. == Methods == While some voice talents are capable of speaking at rates significantly in excess of general norms, the term "time-compressed speech" most usually refers to examples in which the time-reduction has been accomplished through some form of electronic processing of the recorded speech. In general, recorded speech can be electronically time-compressed by: increasing its speed (linear compression); removing silences (selective editing); a combination of the two (non-linear compression). The speed of a recording can be increased, which will cause the material to be presented at a faster rate (and hence in a shorter amount of time), but this has the undesirable side-effect of increasing the frequency of the whole passage, raising the pitch of the voices, which can reduce intelligibility. There are normally silences between words and sentences, and even small silences within certain words, both of which can be reduced or removed ("edited-out") which will also reduce the amount of time occupied by the full speech recording. However, this can also have the effect of removing verbal "punctuation" from the speech, causing words and sentences to run together unnaturally, again reducing intelligibility. Vowels are typically held a minimum of 20 milliseconds, over many cycles of the fundamental pitch. DSP systems can detect the beginning and end of each cycle and then skip over some fraction of those cycles, causing the material to be presented at a faster rate, without changing the pitch, maintaining a "normal" tone of voice. The current preferred method of time-compression is called "non-linear compression", which employs a combination of selectively removing silences; speeding up the speech to make the reduced silences sound normally-proportioned to the text; and finally applying various data algorithms to bring the speech back down to the proper pitch. This produces a more acceptable result than either of the two earlier techniques; however, if unrestrained, removing the silences and increasing the speed can make a selection of speech sound more insistent, possibly to the point of unpleasantness. == Applications == === Advertising === Time-compressed speech is frequently used in television and radio advertising. The advantage of time-compressed speech is that the same number of words can be compressed into a smaller amount of time, reducing advertising costs, and/or allowing more information to be included in a given radio or TV advertisement. It is usually most noticeable in the information-dense caveats and disclaimers presented (usually by legal requirement) at the end of commercials—the aural equivalent of the "fine print" in a printed contract. This practice, however, is not new: before electronic methods were developed, spokespeople who could talk extremely quickly and still be understood were widely used as voice talents for radio and TV advertisements, and especially for recording such disclaimers. === Education === Time-compressed speech has educational applications such as increasing the information density of trainings, and as a study aid. A number of studies have demonstrated that the average person is capable of relatively easily comprehending speech delivered at higher-than-normal rates, with the peak occurring at around 25% compression (that is, 25% faster than normal); this facility has been demonstrated in several languages. Conversational speech (in English) takes place at a rate of around 150 wpm (words per minute), but the average person is able to comprehend speech presented at rates of up to 200-250 wpm without undue difficulty. Blind and severely visually impaired subjects scored similar comprehension levels at even higher rates, up to 300-350 wpm. Blind people have been found to use time-compressed speech extensively, for example, when reviewing recorded lectures from high school and college classes, or professional trainings. Comprehension rates in older blind subjects have been found to be as good, or in some cases better than those found in younger sighted subjects. Other studies have determined that the ability to comprehend highly time-compressed speech tends to fall off with increased age, and is also reduced when the language of the time-compressed speech is not the listener's native language. Non-native speakers can, however, improve their comprehension level of time-compressed speech with multiday training. === Voice Mail === Voice mail systems have employed time-compressed speech since as far back as the 1970s. In this application, the technology enables the rapid review of messages in high-traffic systems, by a relatively small number of people. === Streaming Multimedia === Time-compressed speech has been explored as one of a variety of interrelated factors which may be manipulated to increase the efficiency of streaming multimedia presentations, by significantly reducing the latency times involved in the transfer of large digitally encoded media files.
Read more →
NER model

NER is one of several formulas for accessing live subtitles in television broadcasts and events that are produced using speech recognition. The three letters stand for number, edit error and recognition error. It has been promoted as an alternative to Word error rate (Word Error Rate) which is a more objective measure. The overall score is calculated as follows: Firstly, the number of edit and recognition errors is deducted from the total number of words in the live subtitles. This number is then divided by the total number of words in the live subtitles and finally multiplied by one hundred. N E R v a l u e = N − E − R N ∗ 100 {\displaystyle NERvalue={\frac {N-E-R}{N}}100} . The acronyms stand for the following: N (number) = total number of words in the live subtitles E (Edit error) = edit error R (Recognition error) = recognition error This measurement process has been used for public television broadcasts in European countries like Italy and Switzerland. One major drawback with NER is that it requires a human assessor to rate errors as either: 1 Minor edition or recognition errors 2 Normal edition or recognition errors 3 Serious errors which are then weighted in the assessment process. This is both subjective, time consuming and costly. Also, NER fails to account for words left out subtitles which is something that does not take account of the D/deaf audience who want verbatim subtitles. As a result, NER cannot accurately reflect the audience's experience of subtitles. Another problem is the inconsistency of human evaluation of subtitles, particularly with live subtitles, where there are differing opinions of the importance of subtitle errors. By way of contrast, Word error rate is an objective measure of subtitle errors, since it measures the textual discrepancy between the subtitles and the speech.
Read more →
Robinson compass mask

In image processing, a Robinson compass mask is a type of compass mask used for edge detection. It has eight major compass orientations, each will extract the edges in respect to its direction. A combined use of compass masks of different directions could detect the edges from different angles. == Technical explanation == The Robinson compass mask is defined by taking a single mask and rotating it to form eight orientations: North: [ − 1 0 1 − 2 0 2 − 1 0 1 ] {\displaystyle {\text{North:}}{\begin{bmatrix}-1&0&1\\-2&0&2\\-1&0&1\end{bmatrix}}} North West: [ 0 1 2 − 1 0 1 − 2 − 1 0 ] {\displaystyle {\text{North West:}}{\begin{bmatrix}0&1&2\\-1&0&1\\-2&-1&0\end{bmatrix}}} West: [ 1 2 1 0 0 0 − 1 − 2 − 1 ] {\displaystyle {\text{West:}}{\begin{bmatrix}1&2&1\\0&0&0\\-1&-2&-1\end{bmatrix}}} South West: [ 2 1 0 1 0 − 1 0 − 1 − 2 ] {\displaystyle {\text{South West:}}{\begin{bmatrix}2&1&0\\1&0&-1\\0&-1&-2\end{bmatrix}}} South: [ 1 0 − 1 2 0 − 2 1 0 − 1 ] {\displaystyle {\text{South:}}{\begin{bmatrix}1&0&-1\\2&0&-2\\1&0&-1\end{bmatrix}}} South East: [ 0 − 1 − 2 1 0 − 1 2 1 0 ] {\displaystyle {\text{South East:}}{\begin{bmatrix}0&-1&-2\\1&0&-1\\2&1&0\end{bmatrix}}} East: [ − 1 − 2 − 1 0 0 0 1 2 1 ] {\displaystyle {\text{East:}}{\begin{bmatrix}-1&-2&-1\\0&0&0\\1&2&1\end{bmatrix}}} North East: [ − 2 − 1 0 − 1 0 1 0 1 2 ] {\displaystyle {\text{North East:}}{\begin{bmatrix}-2&-1&0\\-1&0&1\\0&1&2\end{bmatrix}}} The direction axis is the line of zeros in the matrix. Robinson compass mask is similar to kirsch compass masks, but is simpler to implement. Since the matrix coefficients only contains 0, 1, 2, and are symmetrical, only the results of four masks need to be calculated, the other four results are the negation of the first four results. An edge, or contour is an tiny area with neighboring distinct pixel values. The convolution of each mask with the image would create a high value output where there is a rapid change of pixel value, thus an edge point is found. All the detected edge points would line up as edges. == Example == An example of Robinson compass masks applied to the original image. Obviously, the edges in the direction of the mask is enhanced.
Read more →
Pixel

In digital imaging, a pixel (abbreviated px), pel, or picture element is the smallest addressable physical element of a raster image or the smallest controllable element of a display device or dot matrix printer. Pixels are arranged in a regular, two-dimensional grid, and each pixel serves as a sample of an original image, with a greater number of samples typically providing more accurate representations. Each pixel possesses a specific intensity or color, often composed of three or four component intensities, such as red, green, and blue (RGB), or cyan, magenta, yellow, and black (CMYK). The intensity of each pixel is variable, and in color imaging systems, these components are combined to produce a wide spectrum of colors. The concept of a picture element has existed since the early days of television, appearing as "Bildpunkt" in a 1888 German patent, and the term "pixel" has been used in various U.S. patents since 1911. In most digital display devices, pixels are the smallest element that can be manipulated through software. Each pixel is a sample of an original image; more samples typically provide more accurate representations of the original. The intensity of each pixel is variable. In color imaging systems, a color is typically represented by three or four component intensities such as red, green, and blue, or cyan, magenta, yellow, and black. In some contexts (such as descriptions of camera sensors), pixel refers to a single scalar element of a multi-component representation (called a photosite in the camera sensor context, although sensel 'sensor element' is sometimes used), while in yet other contexts (like MRI) it may refer to a set of component intensities for a spatial position. Software on early consumer computers was necessarily rendered at a low resolution, with large pixels visible to the naked eye; graphics made under these limitations may be called pixel art, especially in reference to video games. Modern computers and displays, however, can easily render orders of magnitude more pixels than was previously possible, necessitating the use of large measurements like the megapixel (one million pixels). == Etymology == The word pixel is a combination of pix (from "pictures", shortened to "pics") and el (for "element"); similar formations with 'el' include the words voxel 'volume pixel', and texel 'texture pixel'. The word pix appeared in Variety magazine headlines in 1932, as an abbreviation for the word pictures, in reference to movies. By 1938, "pix" was being used in reference to still pictures by photojournalists. The word "pixel" was first published in 1965 by Frederic C. Billingsley of JPL, to describe the picture elements of scanned images from space probes to the Moon and Mars. Billingsley had learned the word from Keith E. McFarland, at the Link Division of General Precision in Palo Alto, who in turn said he did not know where it originated. McFarland said simply it was "in use at the time" (c. 1963). The concept of a "picture element" dates to the earliest days of television, for example as "Bildpunkt" (the German word for pixel, literally 'picture point') in the 1888 German patent of Paul Nipkow. According to various etymologies, the earliest publication of the term picture element itself was in Wireless World magazine in 1927, though it had been used earlier in various U.S. patents filed as early as 1911. Some authors explain pixel as picture cell, as early as 1972. In graphics and in image and video processing, pel is often used instead of pixel. For example, IBM used it in their Technical Reference for the original PC. Pixilation, spelled with a second i, is an unrelated filmmaking technique that dates to the beginnings of cinema, in which live actors are posed frame by frame and photographed to create stop-motion animation. An archaic British word meaning "possession by spirits (pixies)", the term has been used to describe the animation process since the early 1950s; various animators, including Norman McLaren and Grant Munro, are credited with popularizing it. == Technical == A pixel is generally thought of as the smallest single component of a digital image. However, the definition is highly context-sensitive. For example, there can be "printed pixels" in a page, or pixels carried by electronic signals, or represented by digital values, or pixels on a display device, or pixels in a digital camera (photosensor elements). This list is not exhaustive and, depending on context, synonyms include pel, sample, byte, bit, dot, and spot. Pixels can be used as a unit of measure such as: 2400 pixels per inch, 640 pixels per line, or spaced 10 pixels apart. The measures "dots per inch" (dpi) and "pixels per inch" (ppi) are sometimes used interchangeably, but have distinct meanings, especially for printer devices, where dpi is a measure of the printer's density of dot (e.g. ink droplet) placement. For example, a high-quality photographic image may be printed with 600 ppi on a 1200 dpi inkjet printer. Even higher dpi numbers, such as the 4800 dpi quoted by printer manufacturers since 2002, do not mean much in terms of achievable resolution. The more pixels used to represent an image, the closer the result can resemble the original. The number of pixels in an image is sometimes called the resolution, though resolution has a more specific definition. Pixel counts can be expressed as a single number, as in a "three-megapixel" digital camera, which has a nominal three million pixels, or as a pair of numbers, as in a "640 by 480 display", which has 640 pixels from side to side and 480 from top to bottom (as in a VGA display) and therefore has a total number of 640 × 480 = 307,200 pixels, or 0.3 megapixels. The pixels, or color samples, that form a digitized image (such as a JPEG file used on a web page) may or may not be in one-to-one correspondence with screen pixels, depending on how a computer displays an image. In computing, an image composed of pixels is known as a bitmapped image or a raster image. The word raster originates from television scanning patterns, and has been widely used to describe similar halftone printing and storage techniques. === Sampling patterns === For convenience, pixels are normally arranged in a regular two-dimensional grid. By using this arrangement, many common operations can be implemented by uniformly applying the same operation to each pixel independently. Other arrangements of pixels are possible, with some sampling patterns even changing the shape (or kernel) of each pixel across the image. For this reason, care must be taken when acquiring an image on one device and displaying it on another, or when converting image data from one pixel format to another. For example: Liquid-crystal displays (LCDs) typically use a staggered grid, where the red, green, and blue components are sampled at slightly different locations. Subpixel rendering is a technology which takes advantage of these differences to improve the rendering of text on LCD screens. The vast majority of color digital cameras use a Bayer filter, resulting in a regular grid of pixels where the color of each pixel depends on its position on the grid. A clipmap uses a hierarchical sampling pattern, where the size of the support of each pixel depends on its location within the hierarchy. Warped grids are used when the underlying geometry is non-planar, such as images of the earth from space. The use of non-uniform grids is an active research area, attempting to bypass the traditional Nyquist limit. Pixels on computer monitors are normally "square" (that is, have equal horizontal and vertical sampling pitch); pixels in other systems are often "rectangular" (that is, have unequal horizontal and vertical sampling pitch – oblong in shape), as are digital video formats with diverse aspect ratios, such as the anamorphic widescreen formats of the Rec. 601 digital video standard. === Resolution of computer monitors === Computer monitors (and TV sets) generally have a fixed native resolution. What it is depends on the monitor, and size. See below for historical exceptions. Computers can use pixels to display an image, often an abstract image that represents a GUI. The resolution of this image is called the display resolution and is determined by the video card of the computer. Flat-panel monitors (and TV sets), e.g. OLED or LCD monitors, or E-ink, also use pixels to display an image, and have a native resolution, and it should (ideally) be matched to the video card resolution. Each pixel is made up of triads, with the number of these triads determining the native resolution. On older, historically available, CRT monitors the resolution was possibly adjustable (still lower than what modern monitor achieve), while on some such monitors (or TV sets) the beam sweep rate was fixed, resulting in a fixed native resolution. Most CRT monitors do not have a fixed beam sweep rate, meaning they do not have a native resolution at all – instead they
Read more →
Passenger drone

A passenger drone is an autonomous aircraft that is designed to carry a small number of passengers to a destination. In 2021, Ehang, a technology company based in Guangzhou, China, developed the Ehang 184, the world's first passenger drone. == History == Unmanned aerial vehicles were first introduced in World War 1, when Britain first developed the Aerial Target, an aircraft controlled remotely through radio signals. A year later in the United States, testing of Kettering Bug, a 12-foot long biplane attached with a bomb and that launched via a “slingshot-like rail”, was also under progress. Both of their unreliable test results and their possibility of endangering friendly troops in deployment caused neither aircraft to be used during the war. Production of UAVs continued after World War I and into World War II and the Vietnam War, where they would be invaluable in assisting with training as well as reconnaissance. Late 20th century also saw the proposition and development of unique methods of travel, including personal jetpacks and even flying cars. While the previously mentioned are not drones, they serve as a precursor and foundation for the passenger drones of today. The first passenger drone was unveiled on January 6 of 2016 at the international Consumer Electronics Show (CES) in Las Vegas. Produced by Ehang, a Chinese company based in Guangzhou, the 184 was a one passenger drone equipped with four propellers that could fly for approximately 23 minutes at a top speed of 63 mph. Since then, many new companies have entered the market, but none yet have been accessible by the public. == Technological development == Since 2013, improvements in designs to wing structures have contributed to the economic feasibility of passenger drones. New structural advancements, such as the flapping-wing propulsion system based on the mechanisms of birds’ wings, are more available as they have proven their capabilities in laboratory testing. As of September 29th, 2015, most market-ready drones are delivery drones with a carrying capacity limited to small packages - with a typical max capacity of under 5 pounds. However, while the technology exists for drones with larger carrying capacities, specifically those capable of carrying multiple humans, the execution of this technology is not yet market accessible. This capacity limit must be addressed for passenger drones; given current designs strive to carry a maximum of 5 people. However, some estimates believe that passengers drones could become a reality, specifically for paid transportation and emergency purposes, as early as 2026. With implementation of this technology, there could be significant effects on ground traffic including reducing gridlock in heavily congested areas and conserving up to 15% of the fuel currently used in heavy traffic patterns. However, extensive growth of the passenger drone market also risks clouding the low-altitude airspace and causing new safety risks. However, this concern is being addressed by recent advancements in the Internet of Drones (IoD) which links drones together to ensure appropriate pathing and reduce mid-air collisions. While this brings additional security issues, including maintaining reliable communication channels in the case of technological failure, researchers hope that this will help reduce crashes that can result in damage to passengers, buildings, and people in and around the airspace. == Notable companies == Ehang is a Chinese company that has developed numerous drones including passenger plane Ehang 184. EHang 184 was their first model, developed as an eight dual rotor wing blade drone that can carry two passengers. The model was retired in 2020 and is replaced by the Ehang 216. Ehang also released a one passenger drone, Ehang 116. Ehang in 2021 unveiled the model VT-30. VT-30 is designed to have eight dual rotor wing blades to complement its fixed wing platform. Flyastro, a Texas-based drone company, developed the Astro ALTA, with two and four person passenger models. The company is known for being the first to develop a solar-powered airplane. The development team initially began with the model, Elroy. It was a two passenger drone with similar design to the ALTA. Once flight was achieved, the model Astro ALTA began development. Joby Aviation is a California based company that has developed a five passenger drone, with one seat for the pilot. The company expects to complete its FAA certification process 2022. Joby in 2020 acquired a 75 million dollar investment from service provider Uber Technologies Inc., leading to Uber Elevate and Expands partnership. Archer Aviation is a California-based company that has developed a two passenger model called Maker. It has fixed wings with twelve rotor wings. Archer is developing five person model. United Airlines has partnered with Archer for commercial sale of the model, Maker. Maker is expected to be released within Los Angeles and Miami by 2024. CityAirbus is a drone project developed by Airbus, a European multinational aerospace company, based in the Netherlands. CityAirbus has developed a four- person passenger drone with fixed wings that include rotor wing blades. Its expected certification for public flight is in 2025. Boeing, an American multinational aviation corporation is developing a passenger drone model called the Passenger Air Vehicle (PAV). The model is a fixed wing with eight rotor blade wings attached onto a platform underneath the base structure. This model can hold two passengers and still is in development. Volocopter is a German aircraft manufacturer that is developing a passenger drone called Volocity. The model consist of eighteen rotor wings above the cockpit on a circular ring. Japan Airlines, an investor of Volocopter plans to have public test in Japan as early as 2023. == Future use == === Potential benefits === Passenger drones can greatly reduce the time for travel. As passenger drones flight paths are not restricted by conventional roads, the travel distance is shortened. Current ventures such as Joby Aviation, after acquiring Uber Air, plan to take advantage of this technology in the form of air taxis. Other potential benefits include the use of passenger drones by emergency services such as search and rescue missions and the delivery of life saving goods. Companies like Ehang have already begun using passenger drones as emergency vehicles as a response to the potential river collapses during the flood season in China. === Concerns === Passenger and air traffic safety remains at the forefront of concerns. Regulations for air traffic centered around passenger drones are still underway and would continue to develop with increasing use cases for passenger drones. Remote security threats on commercial drones such as Man-In-The-Middle (MITM) attack have also exposed the vulnerabilities in current drone systems. Among American adults, 54 percent say that they would feel unsafe flying inside a passenger drone. Passenger drones can be very noisy; a single passenger drone such as Joby Aviation’s all-electric vertical take-off and landing (“eVTOL”) aircraft has an estimated noise production of 70 decibels (dB), a noise level equating to “loud traffic”.
Read more →