AI Data Delivery F5

AI Data Delivery F5 — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Ordered dithering

  Ordered dithering is any image dithering algorithm which uses a pre-set threshold map tiled across an image. It is commonly used to display a continuous image on a display of smaller color depth. For example, Microsoft Windows uses it in 16-color graphics modes. With the most common "Bayer" threshold map, the algorithm is characterized by noticeable crosshatch patterns in the result. == Threshold map == The algorithm reduces the number of colors by applying a threshold map M to the pixels displayed, causing some pixels to change color, depending on the distance of the original color from the available color entries in the reduced palette. The first threshold maps were designed by hand to minimise the perceptual difference between a grayscale image and its two-bit quantisation for up to a 4x4 matrix. An optimal threshold matrix is one that for any possible quantisation of color has the minimum possible texture so that the greatest impression of the underlying feature comes from the image being quantised. It can be proven that for matrices whose side length is a power of two there is an optimal threshold matrix. The map may be rotated or mirrored without affecting the effectiveness of the algorithm. This threshold map (for sides with length as power of two) is also known as a Bayer matrix or, when unscaled, an index matrix. For threshold maps whose dimensions are a power of two, the map can be generated recursively via: M 2 n = 1 ( 2 n ) 2 [ 4 M n 4 M n + 2 J n 4 M n + 3 J n 4 M n + J n ] = J 2 ⊗ M n + 1 n 2 M 2 ⊗ J n , {\displaystyle \mathbf {M} _{2n}={\frac {1}{(2n)^{2}}}{\begin{bmatrix}4\mathbf {M} _{n}&4\mathbf {M} _{n}+2\mathbf {J} _{n}\\4\mathbf {M} _{n}+3\mathbf {J} _{n}&4\mathbf {M} _{n}+\mathbf {J} _{n}\end{bmatrix}}=\mathbf {J} _{2}\otimes \mathbf {M} _{n}+{\frac {1}{n^{2}}}\mathbf {M} _{2}\otimes \mathbf {J} _{n},} where J n {\displaystyle \mathbf {J} _{n}} are n × n {\displaystyle n\times n} matrices of ones and ⊗ {\displaystyle \otimes } is the Kronecker product. While the metric for texture that Bayer proposed could be used to find optimal matrices for sizes that are not a power of two, such matrices are uncommon as no simple formula for finding them exists, and relatively small matrix sizes frequently give excellent practical results (especially when combined with other modifications to the dithering algorithm). This function can also be expressed using only bit arithmetic: M(i, j) = bit_reverse(bit_interleave(bitwise_xor(i, j), i)) / n ^ 2 == Pre-calculated threshold maps == Rather than storing the threshold map as a matrix of n {\displaystyle n} × n {\displaystyle n} integers from 0 to n 2 {\displaystyle n^{2}} , depending on the exact hardware used to perform the dithering, it may be beneficial to pre-calculate the thresholds of the map into a floating point format, rather than the traditional integer matrix format shown above. For this, the following formula can be used: Mpre(i,j) = Mint(i,j) / n^2 This generates a standard threshold matrix. for the 2×2 map: this creates the pre-calculated map: Additionally, normalizing the values to average out their sum to 0 (as done in the dithering algorithm shown below) can be done during pre-processing as well by subtracting 1⁄2 of the largest value from every value: Mpre(i,j) = Mint(i,j) / n^2 – 0.5 maxValue creating the pre-calculated map: == Algorithm == The ordered dithering algorithm renders the image normally, but for each pixel, it offsets its color value with a corresponding value from the threshold map according to its location, causing the pixel's value to be quantized to a different color if it exceeds the threshold. For most dithering purposes, it is sufficient to simply add the threshold value to every pixel (without performing normalization by subtracting 1⁄2), or equivalently, to compare the pixel's value to the threshold: if the brightness value of a pixel is less than the number in the corresponding cell of the matrix, plot that pixel black, otherwise, plot it white. This lack of normalization slightly increases the average brightness of the image, and causes almost-white pixels to not be dithered. This is not a problem when using a gray scale palette (or any palette where the relative color distances are (nearly) constant), and it is often even desired, since the human eye perceives differences in darker colors more accurately than lighter ones, however, it produces incorrect results especially when using a small or arbitrary palette, so proper normalization should be preferred. In other words, the algorithm performs the following transformation on each color c of every pixel: c ′ = n e a r e s t _ p a l e t t e _ c o l o r ( c + r × ( M ( x mod n , y mod n ) − 1 / 2 ) ) {\displaystyle c'=\mathrm {nearest\_palette\_color} {\mathopen {}}\left(c+r\times \left(M(x{\bmod {n}},y{\bmod {n}})-1/2\right){\mathclose {}}\right)} where M(i, j) is the threshold map on the i-th row and j-th column, c′ is the transformed color, and r is the amount of spread in color space. Assuming an RGB palette with 23N evenly distanced colors where each color (a triple of red, green and blue values) is represented by an octet from 0 to 255, one would typically choose r ≈ 255 N {\textstyle r\approx {\frac {255}{N}}} . (1⁄2 is again the normalizing term.) Because the algorithm operates on single pixels and has no conditional statements, it is very fast and suitable for real-time transformations. Additionally, because the location of the dithering patterns always stays the same relative to the display frame, it is less prone to jitter than error-diffusion methods, making it suitable for animations. Because the patterns are more repetitive than error-diffusion method, an image with ordered dithering compresses better. Ordered dithering is more suitable for line-art graphics as it will result in straighter lines and fewer anomalies. The values read from the threshold map should preferably scale into the same range as the minimal difference between distinct colors in the target palette. Equivalently, the size of the map selected should be equal to or larger than the ratio of source colors to target colors. For example, when quantizing a 24 bpp image to 15 bpp (256 colors per channel to 32 colors per channel), the smallest map one would choose would be 4×2, for the ratio of 8 (256:32). This allows expressing each distinct tone of the input with different dithering patterns. === A variable palette: pattern dithering === == Non-Bayer approaches == The above thresholding matrix approach describes the Bayer family of ordered dithering algorithms. A number of other algorithms are also known; they generally involve changes in the threshold matrix, which changes the distribution of the "noise" introduced by all kinds of dithering (the difference between the original image and the dithered image). === Halftone === Halftone dithering performs a form of clustered dithering, creating a look similar to halftone patterns, using a specially crafted matrix. === Void and cluster === The Void and cluster algorithm uses a pre-generated blue noise as the matrix for the dithering process. The blue noise matrix keeps the Bayer's good high frequency content, but with a more uniform coverage of all the frequencies involved shows a much lower amount of patterning. The "voids-and-cluster" method gets its name from the matrix generation procedure, where a black image with randomly initialized white pixels is gaussian-blurred to find the brightest and darkest parts, corresponding to voids and clusters. After a few swaps have evenly distributed the bright and dark parts, the pixels are numbered by importance. It takes significant computational resources to generate the blue noise matrix: on a modern computer a 64×64 matrix requires a couple seconds using the original algorithm. This algorithm can be extended to make animated dither masks which also consider the axis of time. This is done by running the algorithm in three dimensions and using a kernel which is a product of a two-dimensional gaussian kernel on the XY plane, and a one-dimensional Gaussian kernel on the Z axis. === Simulated Annealing === Simulated annealing can generate dither masks by starting with a flat histogram and swapping values to optimize a loss function. The loss function controls the spectral properties of the mask, allowing it to make blue noise or noise patterns meant to be filtered by specific filters. The algorithm can also be extended over time for animated dither masks with chosen temporal properties.

  Read more →
• 

  Spiking neural network

  Spiking neural networks (SNNs) are artificial neural networks (ANN) that mimic natural neural networks. These models leverage timing of discrete spikes as the main information carrier. In addition to neuronal and synaptic state, SNNs incorporate the concept of time into their operating model. The idea is that neurons in the SNN do not transmit information at each propagation cycle (as it happens with typical multi-layer perceptron networks), but rather transmit information only when a membrane potential—an intrinsic quality of the neuron related to its membrane electrical charge—reaches a specific value, called the threshold. When the membrane potential reaches the threshold, the neuron fires, and generates a signal that travels to other neurons which, in turn, increase or decrease their potentials in response to this signal. A neuron model that fires at the moment of threshold crossing is also called a spiking neuron model. While spike rates can be considered the analogue of the variable output of a traditional ANN, neurobiology research indicated that high speed processing cannot be performed solely through a rate-based scheme. For example humans can perform an image recognition task requiring no more than 10ms of processing time per neuron through the successive layers (going from the retina to the temporal lobe). This time window is too short for rate-based encoding. The precise spike timings in a small set of spiking neurons also has a higher information coding capacity compared with a rate-based approach. The most prominent spiking neuron model is the leaky integrate-and-fire model. In that model, the momentary activation level (modeled as a differential equation) is normally considered to be the neuron's state, with incoming spikes pushing this value higher or lower, until the state eventually either decays or—if the firing threshold is reached—the neuron fires. After firing, the state variable is reset to a lower value. Various decoding methods exist for interpreting the outgoing spike train as a real-value number, relying on either the frequency of spikes (rate-code), the time-to-first-spike after stimulation, or the interval between spikes. == History == Many multi-layer artificial neural networks are fully connected, receiving input from every neuron in the previous layer and signalling every neuron in the subsequent layer. Although these networks have achieved breakthroughs, they do not match biological networks and do not mimic neurons. The biology-inspired Hodgkin–Huxley model of a spiking neuron was proposed in 1952. This model described how action potentials are initiated and propagated. Communication between neurons, which requires the exchange of chemical neurotransmitters in the synaptic gap, is described in models such as the integrate-and-fire model, FitzHugh–Nagumo model (1961–1962), and Hindmarsh–Rose model (1984). The leaky integrate-and-fire model (or a derivative) is commonly used as it is easier to compute than Hodgkin–Huxley. While the notion of an artificial spiking neural network became popular only in the twenty-first century, studies between 1980 and 1995 supported the concept. The first models of this type of ANN appeared to simulate non-algorithmic intelligent information processing systems. However, the notion of the spiking neural network as a mathematical model was first worked on in the early 1970s. As of 2019 SNNs lagged behind ANNs in accuracy, but the gap is decreasing, and has vanished on some tasks. == Underpinnings == Information in the brain is represented as action potentials (neuron spikes), which may group into spike trains or coordinated waves. A fundamental question of neuroscience is to determine whether neurons communicate by a rate or temporal code. Temporal coding implies that a single spiking neuron can replace hundreds of hidden units on a conventional neural net. SNNs define a neuron's current state as its potential (possibly modeled as a differential equation). An input pulse causes the potential to rise and then gradually decline. Encoding schemes can interpret these pulse sequences as a number, considering pulse frequency and pulse interval. Using the precise time of pulse occurrence, a neural network can consider more information and offer better computing properties. SNNs compute in the continuous domain. Such neurons test for activation only when their potentials reach a certain value. When a neuron is activated, it produces a signal that is passed to connected neurons, accordingly raising or lowering their potentials. The SNN approach produces a continuous output instead of the binary output of traditional ANNs. Pulse trains are not easily interpretable, hence the need for encoding schemes. However, a pulse train representation may be more suited for processing spatiotemporal data (or real-world sensory data classification). SNNs connect neurons only to nearby neurons so that they process input blocks separately (similar to CNN using filters). They consider time by encoding information as pulse trains so as not to lose information. This avoids the complexity of a recurrent neural network (RNN). Impulse neurons are more powerful computational units than traditional artificial neurons. SNNs are theoretically more powerful than so called "second-generation networks" defined as ANNs "based on computational units that apply activation function with a continuous set of possible output values to a weighted sum (or polynomial) of the inputs"; however, SNN training issues and hardware requirements limit their use. Although unsupervised biologically inspired learning methods are available such as Hebbian learning and STDP, no effective supervised training method is suitable for SNNs that can provide better performance than second-generation networks. Spike-based activation of SNNs is not differentiable, thus gradient descent-based backpropagation (BP) is not available. SNNs have much larger computational costs for simulating realistic neural models than traditional ANNs. Pulse-coupled neural networks (PCNN) are often confused with SNNs. A PCNN can be seen as a kind of SNN. Researchers are actively working on various topics. The first concerns differentiability. The expressions for both the forward- and backward-learning methods contain the derivative of the neural activation function which is not differentiable because a neuron's output is either 1 when it spikes, and 0 otherwise. This all-or-nothing behavior disrupts gradients and makes these neurons unsuitable for gradient-based optimization. Approaches to resolving it include: resorting to entirely biologically inspired local learning rules for the hidden units translating conventionally trained "rate-based" NNs to SNNs smoothing the network model to be continuously differentiable defining an SG (Surrogate Gradient) as a continuous relaxation of the real gradients The second concerns the optimization algorithm. Standard BP can be expensive in terms of computation, memory, and communication and may be poorly suited to the hardware that implements it (e.g., a computer, brain, or neuromorphic device). Incorporating additional neuron dynamics such as Spike Frequency Adaptation (SFA) is a notable advance, enhancing efficiency and computational power. These neurons sit between biological complexity and computational complexity. Originating from biological insights, SFA offers significant computational benefits by reducing power usage, especially in cases of repetitive or intense stimuli. This adaptation improves signal/noise clarity and introduces an elementary short-term memory at the neuron level, which in turn, improves accuracy and efficiency. This was mostly achieved using compartmental neuron models. The simpler versions are of neuron models with adaptive thresholds, are an indirect way of achieving SFA. It equips SNNs with improved learning capabilities, even with constrained synaptic plasticity, and elevates computational efficiency. This feature lessens the demand on network layers by decreasing the need for spike processing, thus lowering computational load and memory access time—essential aspects of neural computation. Moreover, SNNs utilizing neurons capable of SFA achieve levels of accuracy that rival those of conventional ANNs, while also requiring fewer neurons for comparable tasks. This efficiency streamlines the computational workflow and conserves space and energy, while maintaining technical integrity. High-performance deep spiking neural networks can operate with 0.3 spikes per neuron. == Applications == SNNs can in principle be applied to the same applications as traditional ANNs. In addition, SNNs can model the central nervous system of biological organisms, such as an insect seeking food without prior knowledge of the environment. Due to their relative realism, they can be used to study biological neural circuits. Starting with a hypothesis about the topology of a biological neuronal circuit and its functi

  Read more →
• 

  Training, validation, and test data sets

  In machine learning, a common task is the study and construction of algorithms that can learn from and make predictions on data. Such algorithms function by making data-driven predictions or decisions, through building a mathematical model from input data. These input data used to build the model are usually divided into multiple data sets. In particular, three data sets are commonly used in different stages of the creation of the model: training, validation, and testing sets. The model is initially fit on a training data set, which is a set of examples used to fit the parameters (e.g. weights of connections between neurons in artificial neural networks) of the model. The model (e.g. a naive Bayes classifier) is trained on the training data set using a supervised learning method, for example using optimization methods such as gradient descent or stochastic gradient descent. In practice, the training data set often consists of pairs of an input vector (or scalar) and the corresponding output vector (or scalar), where the answer key is commonly denoted as the target (or label). The current model is run with the training data set and produces a result, which is then compared with the target, for each input vector in the training data set. Based on the result of the comparison and the specific learning algorithm being used, the parameters of the model are adjusted. The model fitting can include both variable selection and parameter estimation. Successively, the fitted model is used to predict the responses for the observations in a second data set called the validation data set. The validation data set provides an unbiased evaluation of a model fit on the training data set while tuning the model's hyperparameters (e.g. the number of hidden units—layers and layer widths—in a neural network). Validation data sets can be used for regularization by early stopping (stopping training when the error on the validation data set increases, as this is a sign of over-fitting to the training data set). This simple procedure is complicated in practice by the fact that the validation data set's error may fluctuate during training, producing multiple local minima. This complication has led to the creation of many ad-hoc rules for deciding when over-fitting has truly begun. Finally, the test data set is a data set used to provide an unbiased evaluation of a model fit on the training data set. When the data in the test data set has never been used (for example in cross-validation), the test data set is called a holdout data set. The term "validation set" is sometimes used instead of "test set" in some literature (e.g., if the original data set was partitioned into only two subsets, the test set might be referred to as the validation set). Deciding the sizes and strategies for data set division in training, test and validation sets is very dependent on the problem and data available. == Training data set == A training data set is a data set of examples used during the learning process and is used to fit the parameters (e.g., weights) of, for example, a classifier. For classification tasks, a supervised learning algorithm looks at the training data set to determine, or learn, the optimal combinations of variables that will generate a good predictive model. The goal is to produce a trained (fitted) model that generalizes well to new, unknown data. The fitted model is evaluated using “new” examples from the held-out data sets (validation and test data sets) to estimate the model’s accuracy in classifying new data. To reduce the risk of issues such as over-fitting, the examples in the validation and test data sets should not be used to train the model. Most approaches that search through training data for empirical relationships tend to overfit the data, meaning that they can identify and exploit apparent relationships in the training data that do not hold in general. When a training set is continuously expanded with new data, then this is incremental learning. == Validation data set == A validation data set is a data set of examples used to tune the hyperparameters (i.e. the architecture) of a model. It is sometimes also called the development set or the "dev set". An example of a hyperparameter for artificial neural networks includes the number of hidden units in each layer. It, as well as the testing set (as mentioned below), should follow the same probability distribution as the training data set. In order to avoid overfitting, when any classification parameter needs to be adjusted, it is necessary to have a validation data set in addition to the training and test data sets. For example, if the most suitable classifier for the problem is sought, the training data set is used to train the different candidate classifiers, the validation data set is used to compare their performances and decide which one to take and, finally, the test data set is used to obtain the performance characteristics such as accuracy, sensitivity, specificity, F-measure, and so on. The validation data set functions as a hybrid: it is training data used for testing, but neither as part of the low-level training nor as part of the final testing. The basic process of using a validation data set for model selection (as part of training data set, validation data set, and test data set) is: Since our goal is to find the network having the best performance on new data, the simplest approach to the comparison of different networks is to evaluate the error function using data which is independent of that used for training. Various networks are trained by minimization of an appropriate error function defined with respect to a training data set. The performance of the networks is then compared by evaluating the error function using an independent validation set, and the network having the smallest error with respect to the validation set is selected. This approach is called the hold out method. Since this procedure can itself lead to some overfitting to the validation set, the performance of the selected network should be confirmed by measuring its performance on a third independent set of data called a test set. An application of this process is in early stopping, where the candidate models are successive iterations of the same network, and training stops when the error on the validation set grows, choosing the previous model (the one with minimum error). == Test data set == A test data set is a data set that is independent of the training data set, but that follows the same probability distribution as the training data set. A test set is therefore a set of examples used only to assess the performance (i.e. generalization) of a specified classifier on unseen data. To do this, the model is used to predict classifications of examples in the test set. Those predictions are compared to the examples' true classifications to assess the model's accuracy. If a model fit to the training and validation data set also fits the test data set well, minimal overfitting has taken place (see figure below). A better fitting of the training or validation data sets as opposed to the test data set usually points to overfitting. In the scenario where a data set has a low number of samples, it is usually partitioned into a training set and a validation data set, where the model is trained on the training set and refined using the validation set to improve accuracy, but this approach will lead to overfitting. The holdout method can also be employed, where the test set is used at the end, after training on the training set. Other techniques, such as cross-validation and bootstrapping, are used on small data sets. The bootstrap method generates numerous simulated data sets of the same size by randomly sampling with replacement from the original data, allowing the random data points to serve as test sets for evaluating model performance. Cross-validation splits the data set into multiple folds, with a single sub-fold used as test data; the model is trained on the remaining folds, and all folds are cross-validated (with results averaged and models consolidated) to estimate final model performance. Note that some sources advise against using a single split, as it can lead to overfitting as well as biased model performance estimates. For this reason, data sets are split into three partitions: training, validation and test data sets. The standard machine learning practice is to train on the training set and tune hyperparameters using the validation set, where the validation process selects the model with the lowest validation loss, which is then tested on the test data set (normally held out) to assess the final model. The holdout method for the test set reduces computation by avoiding using the test set after each epoch. The test data set should never be used for validating the training model or fine-tuning hyperparameters, as it provides an accurate and honest evaluation of the model's final performance on unseen dat

  Read more →
• 

  Teaching dimension

  In computational learning theory, the teaching dimension of a concept class C is defined to be max c ∈ C { w C ( c ) } {\displaystyle \max _{c\in C}\{w_{C}(c)\}} , where w C ( c ) {\displaystyle {w_{C}(c)}} is the minimum size of a witness set for c in C. Intuitively, this measures the number of instances that are needed to identify a concept in the class, using supervised learning with examples provided by a helpful teacher who is trying to convey the concept as succinctly as possible. This definition was formulated in 1995 by Sally Goldman and Michael Kearns, based on earlier work by Goldman, Ron Rivest, and Robert Schapire. The teaching dimension of a finite concept class can be used to give a lower and an upper bound on the membership query cost of the concept class. In Stasys Jukna's book "Extremal Combinatorics", a lower bound is given for the teaching dimension in general: Let C be a concept class over a finite domain X. If the size of C is greater than 2 k ( | X | k ) , {\displaystyle 2^{k}{|X| \choose k},} then the teaching dimension of C is greater than k. However, there are more specific teaching models that make assumptions about teacher or learner, and can get lower values for the teaching dimension. For instance, several models are the classical teaching (CT) model, the optimal teacher (OT) model, recursive teaching (RT), preference-based teaching (PBT), and non-clashing teaching (NCT).

  Read more →
• 

  Outline of machine learning

  The following outline is provided as an overview of, and topical guide to, machine learning: Machine learning (ML) is a subfield of artificial intelligence within computer science that evolved from the study of pattern recognition and computational learning theory. In 1959, Arthur Samuel defined machine learning as a "field of study that gives computers the ability to learn without being explicitly programmed". ML involves the study and construction of algorithms that can learn from and make predictions on data. These algorithms operate by building a model from a training set of example observations to make data-driven predictions or decisions expressed as outputs, rather than following strictly static program instructions. == How can machine learning be categorized? == An academic discipline A branch of science An applied science A subfield of computer science A branch of artificial intelligence A subfield of soft computing Application of statistics === Paradigms of machine learning === Supervised learning, where the model is trained on labeled data Unsupervised learning, where the model tries to identify patterns in unlabeled data Reinforcement learning, where the model learns to make decisions by receiving rewards or penalties. == Applications of machine learning == Applications of machine learning Bioinformatics Biomedical informatics Computer vision Customer relationship management Data mining Earth sciences Email filtering Inverted pendulum (balance and equilibrium system) Natural language processing Named Entity Recognition Automatic summarization Automatic taxonomy construction Dialog system Grammar checker Language recognition Handwriting recognition Optical character recognition Speech recognition Text to Speech Synthesis Speech Emotion Recognition Machine translation Question answering Speech synthesis Text mining Term frequency–inverse document frequency Text simplification Pattern recognition Facial recognition system Handwriting recognition Image recognition Optical character recognition Speech recognition Recommendation system Collaborative filtering Content-based filtering Hybrid recommender systems Search engine Search engine optimization Social engineering == Machine learning hardware == Graphics processing unit Tensor processing unit Vision processing unit == Machine learning tools == Comparison of machine learning software Comparison of deep learning software === Machine learning frameworks === ==== Proprietary machine learning frameworks ==== Amazon Machine Learning Microsoft Azure Machine Learning Studio DistBelief (replaced by TensorFlow) ==== Open source machine learning frameworks ==== Apache Singa Apache MXNet Caffe PyTorch mlpack TensorFlow Torch CNTK Accord.Net Jax MLJ.jl – A machine learning framework for Julia === Machine learning libraries === Deeplearning4j Theano scikit-learn Keras === Machine learning algorithms === == Machine learning methods == === Instance-based algorithm === K-nearest neighbors algorithm (KNN) Learning vector quantization (LVQ) Self-organizing map (SOM) === Regression analysis === Logistic regression Ordinary least squares regression (OLSR) Linear regression Stepwise regression Multivariate adaptive regression splines (MARS) Regularization algorithm Ridge regression Least Absolute Shrinkage and Selection Operator (LASSO) Elastic net Least-angle regression (LARS) Classifiers Probabilistic classifier Naive Bayes classifier Binary classifier Linear classifier Hierarchical classifier === Dimensionality reduction === Dimensionality reduction Canonical correlation analysis (CCA) Factor analysis Feature extraction Feature selection Independent component analysis (ICA) Linear discriminant analysis (LDA) Multidimensional scaling (MDS) Non-negative matrix factorization (NMF) Partial least squares regression (PLSR) Principal component analysis (PCA) Principal component regression (PCR) Projection pursuit Sammon mapping t-distributed stochastic neighbor embedding (t-SNE) === Ensemble learning === Ensemble learning AdaBoost Boosting Bootstrap aggregating (also "bagging" or "bootstrapping") Ensemble averaging Gradient boosted decision tree (GBDT) Gradient boosting Random Forest Stacked Generalization === Meta-learning === Meta-learning Inductive bias Metadata === Reinforcement learning === Reinforcement learning Q-learning State–action–reward–state–action (SARSA) Temporal difference learning (TD) Learning Automata === Supervised learning === Supervised learning Averaged one-dependence estimators (AODE) Artificial neural network Case-based reasoning Gaussian process regression Gene expression programming Group method of data handling (GMDH) Inductive logic programming Instance-based learning Lazy learning Learning Automata Learning Vector Quantization Logistic Model Tree Minimum message length (decision trees, decision graphs, etc.) Nearest Neighbor Algorithm Analogical modeling Probably approximately correct learning (PAC) learning Ripple down rules, a knowledge acquisition methodology Symbolic machine learning algorithms Support vector machines Random Forests Ensembles of classifiers Bootstrap aggregating (bagging) Boosting (meta-algorithm) Ordinal classification Conditional Random Field ANOVA Quadratic classifiers k-nearest neighbor Boosting SPRINT Bayesian networks Naive Bayes Hidden Markov models Hierarchical hidden Markov model ==== Bayesian ==== Bayesian statistics Bayesian knowledge base Naive Bayes Gaussian Naive Bayes Multinomial Naive Bayes Averaged One-Dependence Estimators (AODE) Bayesian Belief Network (BBN) Bayesian Network (BN) ==== Decision tree algorithms ==== Decision tree algorithm Decision tree Classification and regression tree (CART) Iterative Dichotomiser 3 (ID3) C4.5 algorithm C5.0 algorithm Chi-squared Automatic Interaction Detection (CHAID) Decision stump Conditional decision tree ID3 algorithm Random forest SLIQ ==== Linear classifier ==== Linear classifier Fisher's linear discriminant Linear regression Logistic regression Multinomial logistic regression Naive Bayes classifier Perceptron Support vector machine === Unsupervised learning === Unsupervised learning Expectation-maximization algorithm Vector Quantization Generative topographic map Information bottleneck method Association rule learning algorithms Apriori algorithm Eclat algorithm ==== Artificial neural networks ==== Artificial neural network Feedforward neural network Extreme learning machine Convolutional neural network Recurrent neural network Long short-term memory (LSTM) Logic learning machine Self-organizing map ==== Association rule learning ==== Association rule learning Apriori algorithm Eclat algorithm FP-growth algorithm ==== Hierarchical clustering ==== Hierarchical clustering Single-linkage clustering Conceptual clustering ==== Cluster analysis ==== Cluster analysis BIRCH DBSCAN Expectation–maximization (EM) Fuzzy clustering Hierarchical clustering k-means clustering k-medians Mean-shift OPTICS algorithm ==== Anomaly detection ==== Anomaly detection k-nearest neighbors algorithm (k-NN) Local outlier factor === Semi-supervised learning === Semi-supervised learning Active learning Generative models Low-density separation Graph-based methods Co-training Transduction === Deep learning === Deep learning Deep belief networks Deep Boltzmann machines Deep Convolutional neural networks Deep Recurrent neural networks Hierarchical temporal memory Generative Adversarial Network Style transfer Transformer Stacked Auto-Encoders === Other machine learning methods and problems === Anomaly detection Association rules Bias-variance dilemma Classification Multi-label classification Clustering Data Pre-processing Empirical risk minimization Feature engineering Feature learning Learning to rank Occam learning Online machine learning PAC learning Regression Reinforcement Learning Semi-supervised learning Statistical learning Structured prediction Graphical models Bayesian network Conditional random field (CRF) Hidden Markov model (HMM) Unsupervised learning VC theory == Machine learning research == List of artificial intelligence projects List of datasets for machine learning research == History of machine learning == History of machine learning Timeline of machine learning == Machine learning projects == Machine learning projects: DeepMind Google Brain OpenAI Meta AI Hugging Face == Machine learning organizations == === Machine learning conferences and workshops === Artificial Intelligence and Security (AISec) (co-located workshop with CCS) Conference on Neural Information Processing Systems (NIPS) ECML PKDD International Conference on Machine Learning (ICML) ML4ALL (Machine Learning For All) == Machine learning publications == === Books on machine learning === Mathematics for Machine Learning Hands-On Machine Learning Scikit-Learn, Keras, and TensorFlow The Hundred-Page Machine Learning Book === Machine learning journals === Machine Learning Journal of Machine Learning Research (JMLR) Neural Computation == Pe

  Read more →
• 

  Multilinear principal component analysis

  Multilinear principal component analysis (MPCA) is a multilinear extension of principal component analysis (PCA) that is used to analyze M-way arrays, also informally referred to as "data tensors". M-way arrays may be modeled by linear tensor models, such as CANDECOMP/Parafac, or by multilinear tensor models, such as multilinear principal component analysis (MPCA) or multilinear (tensor) independent component analysis (MICA). In 2005, Vasilescu and Terzopoulos introduced the Multilinear PCA terminology as a way to better differentiate between multilinear data models that employed 2nd order statistics versus higher order statistics to compute a set of independent components for each mode, such as Multilinear ICA Multilinear PCA may be applied to compute the causal factors of data formation, or as signal processing tool on data tensors whose individual observation have either been vectorized, or whose observations are treated as a collection of column/row observations, an "observation as a matrix", and concatenated into a data tensor. The latter approach is suitable for compression and reducing redundancy in the rows, columns and fibers that are unrelated to the causal factors of data formation. Vasilescu and Terzopoulos in their paper "TensorFaces" introduced the M-mode SVD algorithm which are algorithms misidentified in the literature as the HOSVD or the Tucker which employ the power method or gradient descent, respectively. Vasilescu and Terzopoulos framed the data analysis, recognition and synthesis problems as multilinear tensor problems. Data is viewed as the compositional consequence of several causal factors, that are well suited for multi-modal tensor factor analysis. The power of the tensor framework was showcased by analyzing human motion joint angles, facial images or textures in the following papers: Human Motion Signatures (CVPR 2001, ICPR 2002), face recognition – TensorFaces, (ECCV 2002, CVPR 2003, etc.) and computer graphics – TensorTextures (Siggraph 2004). == The algorithm == The MPCA solution follows the alternating least square (ALS) approach. It is iterative in nature. As in PCA, MPCA works on centered data. Centering is a little more complicated for tensors, and it is problem dependent. == Feature selection == MPCA features: Supervised MPCA is employed in causal factor analysis that facilitates object recognition while a semi-supervised MPCA feature selection is employed in visualization tasks. == Extensions == Various extension of MPCA: Robust MPCA (RMPCA) Multi-Tensor Factorization, that also finds the number of components automatically (MTF)

  Read more →
• 

  Artificial development

  Artificial development, also known as artificial embryogeny or machine intelligence or computational development, is an area of computer science and engineering concerned with computational models motivated by genotype–phenotype mappings in biological systems. Artificial development is often considered a sub-field of evolutionary computation, although the principles of artificial development have also been used within stand-alone computational models. Within evolutionary computation, the need for artificial development techniques was motivated by the perceived lack of scalability and evolvability of direct solution encodings (Tufte, 2008). Artificial development entails indirect solution encoding. Rather than describing a solution directly, an indirect encoding describes (either explicitly or implicitly) the process by which a solution is constructed. Often, but not always, these indirect encodings are based upon biological principles of development such as morphogen gradients, cell division and cellular differentiation (e.g. Doursat 2008), gene regulatory networks (e.g. Guo et al., 2009), degeneracy (Whitacre et al., 2010), grammatical evolution (de Salabert et al., 2006), or analogous computational processes such as re-writing, iteration, and time. The influences of interaction with the environment, spatiality and physical constraints on differentiated multi-cellular development have been investigated more recently (e.g. Knabe et al. 2008). Artificial development approaches have been applied to a number of computational and design problems, including electronic circuit design (Miller and Banzhaf 2003), robotic controllers (e.g. Taylor 2004), and the design of physical structures (e.g. Hornby 2004).

  Read more →
• 

  Blockmodeling

  Blockmodeling is a set or a coherent framework, that is used for analyzing social structure and also for setting procedure(s) for partitioning (clustering) social network's units (nodes, vertices, actors), based on specific patterns, which form a distinctive structure through interconnectivity. It is primarily used in statistics, machine learning and network science. As an empirical procedure, blockmodeling assumes that all the units in a specific network can be grouped together to such extent to which they are equivalent. Regarding equivalency, it can be structural, regular or generalized. Using blockmodeling, a network can be analyzed using newly created blockmodels, which transforms large and complex network into a smaller and more comprehensible one. At the same time, the blockmodeling is used to operationalize social roles. While some contend that the blockmodeling is just clustering methods, Bonacich and McConaghy state that "it is a theoretically grounded and algebraic approach to the analysis of the structure of relations". Blockmodeling's unique ability lies in the fact that it considers the structure not just as a set of direct relations, but also takes into account all other possible compound relations that are based on the direct ones. The principles of blockmodeling were first introduced by Francois Lorrain and Harrison C. White in 1971. Blockmodeling is considered as "an important set of network analytic tools" as it deals with delineation of role structures (the well-defined places in social structures, also known as positions) and the discerning the fundamental structure of social networks. According to Batagelj, the primary "goal of blockmodeling is to reduce a large, potentially incoherent network to a smaller comprehensible structure that can be interpreted more readily". Blockmodeling was at first used for analysis in sociometry and psychometrics, but has now spread also to other sciences. == Definition == A network as a system is composed of (or defined by) two different sets: one set of units (nodes, vertices, actors) and one set of links between the units. Using both sets, it is possible to create a graph, describing the structure of the network. During blockmodeling, the researcher is faced with two problems: how to partition the units (e.g., how to determine the clusters (or classes), that then form vertices in a blockmodel) and then how to determine the links in the blockmodel (and at the same time the values of these links). In the social sciences, the networks are usually social networks, composed of several individuals (units) and selected social relationships among them (links). Real-world networks can be large and complex; blockmodeling is used to simplify them into smaller structures that can be easier to interpret. Specifically, blockmodeling partitions the units into clusters and then determines the ties among the clusters. At the same time, blockmodeling can be used to explain the social roles existing in the network, as it is assumed that the created cluster of units mimics (or is closely associated with) the units' social roles. Blockmodeling can thus be defined as a set of approaches for partitioning units into clusters (also known as positions) and links into blocks, which are further defined by the newly obtained clusters. A block (also blockmodel) is defined as a submatrix, that shows interconnectivity (links) between nodes, present in the same or different clusters. Each of these positions in the cluster is defined by a set of (in)direct ties to and from other social positions. These links (connections) can be directed or undirected; there can be multiple links between the same pair of objects or they can have weights on them. If there are not any multiple links in a network, it is called a simple network. A matrix representation of a graph is composed of ordered units, in rows and columns, based on their names. The ordered units with similar patterns of links are partitioned together in the same clusters. Clusters are then arranged together so that units from the same clusters are placed next to each other, thus preserving interconnectivity. In the next step, the units (from the same clusters) are transformed into a blockmodel. With this, several blockmodels are usually formed, one being core cluster and others being cohesive; a core cluster is always connected to cohesive ones, while cohesive ones cannot be linked together. Clustering of nodes is based on the equivalence, such as structural and regular. The primary objective of the matrix form is to visually present relations between the persons included in the cluster. These ties are coded dichotomously (as present or absent), and the rows in the matrix form indicate the source of the ties, while the columns represent the destination of the ties. Equivalence can have two basic approaches: the equivalent units have the same connection pattern to the same neighbors or these units have same or similar connection pattern to different neighbors. If the units are connected to the rest of network in identical ways, then they are structurally equivalent. Units can also be regularly equivalent, when they are equivalently connected to equivalent others. With blockmodeling, it is necessary to consider the issue of results being affected by measurement errors in the initial stage of acquiring the data. == Different approaches == Regarding what kind of network is undergoing blockmodeling, a different approach is necessary. Networks can be one–mode or two–mode. In the former all units can be connected to any other unit and where units are of the same type, while in the latter the units are connected only to the unit(s) of a different type. Regarding relationships between units, they can be single–relational or multi–relational networks. Further more, the networks can be temporal or multilevel and also binary (only 0 and 1) or signed (allowing negative ties)/values (other values are possible) networks. Different approaches to blockmodeling can be grouped into two main classes: deterministic blockmodeling and stochastic blockmodeling approaches. Deterministic blockmodeling is then further divided into direct and indirect blockmodeling approaches. Among direct blockmodeling approaches are: structural equivalence and regular equivalence. Structural equivalence is a state, when units are connected to the rest of the network in an identical way(s), while regular equivalence occurs when units are equally related to equivalent others (units are not necessarily sharing neighbors, but have neighbour that are themselves similar). Indirect blockmodeling approaches, where partitioning is dealt with as a traditional cluster analysis problem (measuring (dis)similarity results in a (dis)similarity matrix), are: conventional blockmodeling, generalized blockmodeling: generalized blockmodeling of binary networks, generalized blockmodeling of valued networks and generalized homogeneity blockmodeling, prespecified blockmodeling. According to Brusco and Steinley (2011), the blockmodeling can be categorized (using a number of dimensions): deterministic or stochastic blockmodeling, one–mode or two–mode networks, signed or unsigned networks, exploratory or confirmatory blockmodeling. == Blockmodels == Blockmodels (sometimes also block models) are structures in which: vertices (e.g., units, nodes) are assembled within a cluster, with each cluster identified as a vertex; from such vertices a graph can be constructed; combinations of all the links (ties), represented in a block as a single link between positions, while at the same time constructing one tie for each block. In a case, when there are no ties in a block, there will be no ties between the two positions that define the block. Computer programs can partition the social network according to pre-set conditions. When empirical blocks can be reasonably approximated in terms of ideal blocks, such blockmodels can be reduced to a blockimage, which is a representation of the original network, capturing its underlying 'functional anatomy'. Thus, blockmodels can "permit the data to characterize their own structure", and at the same time not seek to manifest a preconceived structure imposed by the researcher. Blockmodels can be created indirectly or directly, based on the construction of the criterion function. Indirect construction refers to a function, based on "compatible (dis)similarity measure between paris of units", while the direct construction is "a function measuring the fit of real blocks induced by a given clustering to the corresponding ideal blocks with perfect relations within each cluster and between clusters according to the considered types of connections (equivalence)". === Types === Blockmodels can be specified regarding the intuition, substance or the insight into the nature of the studied network; this can result in such models as follows: parent-child role systems, organizational hierarchies, systems of

  Read more →
• 

  Toolchain

  A toolchain is a set of software development tools used to build and otherwise develop software. Often, the tools are executed sequentially and form a pipeline such that the output of one tool is the input for the next. Sometimes the term is used for a set of related tools that are not necessarily executed sequentially. A relatively common and simple toolchain consists of the tools to build for a particular operating system (OS) and CPU architecture: a compiler, a linker, and a debugger. With a cross-compiler, a toolchain can support cross-platform development. For building more complex software systems, many other tools may be in the toolchain. For example, for a video game, the toolchain may include tools for preparing sound effects, music, textures, 3-dimensional models and animations, and for combining these resources into the finished product.

  Read more →
• 

  Ordinal regression

  In statistics, ordinal regression, also called ordinal classification, is a type of regression analysis used for predicting an ordinal variable, i.e. a variable whose value exists on an arbitrary scale where only the relative ordering between different values is significant. It can be considered an intermediate problem between regression and classification. Examples of ordinal regression are ordered logit and ordered probit. Ordinal regression turns up often in the social sciences, for example in the modeling of human levels of preference (on a scale from, say, 1–5 for "very poor" through "excellent"), as well as in information retrieval. In machine learning, ordinal regression may also be called ranking learning. == Linear models for ordinal regression == Ordinal regression can be performed using a generalized linear model (GLM) that fits both a coefficient vector and a set of thresholds to a dataset. Suppose one has a set of observations, represented by length-p vectors x1 through xn, with associated responses y1 through yn, where each yi is an ordinal variable on a scale 1, ..., K. For simplicity, and without loss of generality, we assume y is a non-decreasing vector, that is, yi ≤ {\displaystyle \leq } yi+1. To this data, one fits a length-p coefficient vector w and a set of thresholds θ1, ..., θK−1 with the property that θ1 < θ2 < ... < θK−1. This set of thresholds divides the real number line into K disjoint segments, corresponding to the K response levels. The model can now be formulated as Pr ( y ≤ i ∣ x ) = σ ( θ i − w ⋅ x ) {\displaystyle \Pr(y\leq i\mid \mathbf {x} )=\sigma (\theta _{i}-\mathbf {w} \cdot \mathbf {x} )} or, the cumulative probability of the response y being at most i is given by a function σ (the inverse link function) applied to a linear function of x. Several choices exist for σ; the logistic function σ ( θ i − w ⋅ x ) = 1 1 + e − ( θ i − w ⋅ x ) {\displaystyle \sigma (\theta _{i}-\mathbf {w} \cdot \mathbf {x} )={\frac {1}{1+e^{-(\theta _{i}-\mathbf {w} \cdot \mathbf {x} )}}}} gives the ordered logit model, while using the CDF of the standard normal distribution gives the ordered probit model. A third option is to use an exponential function σ ( θ i − w ⋅ x ) = 1 − exp ⁡ ( − exp ⁡ ( θ i − w ⋅ x ) ) {\displaystyle \sigma (\theta _{i}-\mathbf {w} \cdot \mathbf {x} )=1-\exp(-\exp(\theta _{i}-\mathbf {w} \cdot \mathbf {x} ))} which gives the proportional hazards model. === Latent variable model === The probit version of the above model can be justified by assuming the existence of a real-valued latent variable (unobserved quantity) y, determined by y ∗ = w ⋅ x + ε {\displaystyle y^{}=\mathbf {w} \cdot \mathbf {x} +\varepsilon } where ε is normally distributed with zero mean and unit variance, conditioned on x. The response variable y results from an "incomplete measurement" of y, where one only determines the interval into which y falls: y = { 1 if y ∗ ≤ θ 1 , 2 if θ 1 < y ∗ ≤ θ 2 , 3 if θ 2 < y ∗ ≤ θ 3 ⋮ K if θ K − 1 < y ∗ . {\displaystyle y={\begin{cases}1&{\text{if}}~~y^{}\leq \theta _{1},\\2&{\text{if}}~~\theta _{1} Read more →

• 

  Word2vec

  Word2vec is a technique in natural language processing for obtaining vector representations of words. These vectors capture information about the meaning of the word based on the surrounding words. The word2vec algorithm estimates these representations by modeling text in a large corpus. Once trained, such a model can detect synonymous words or suggest additional words for a partial sentence. Word2vec was developed by Tomáš Mikolov, Kai Chen, Greg Corrado, Ilya Sutskever and Jeff Dean at Google, and published in 2013. Word2vec represents a word as a high-dimension vector of numbers which capture relationships between words. In particular, words which appear in similar contexts are mapped to vectors which are nearby as measured by cosine similarity. This indicates the level of semantic similarity between the words, so for example the vectors for walk and ran are nearby, as are those for "but" and "however", and "Berlin" and "Germany". == Approach == Word2vec is a group of related models that are used to produce word embeddings. These models are shallow, two-layer neural networks that are trained to reconstruct linguistic contexts of words. Word2vec takes as its input a large corpus of text and produces a mapping of the set of words to a vector space, typically of several hundred dimensions, with each unique word in the corpus being assigned a vector in the space. Word2vec can use either of two model architectures to produce these distributed representations of words: continuous bag of words (CBOW) or continuously sliding skip-gram. In both architectures, word2vec considers both individual words and a sliding context window as it iterates over the corpus. The CBOW can be viewed as a 'fill in the blank' task, where the word embedding represents the way the word influences the relative probabilities of other words in the context window. Words which are semantically similar should influence these probabilities in similar ways, because semantically similar words should be used in similar contexts. The order of context words does not influence prediction (bag of words assumption). In the continuous skip-gram architecture, the model uses the current word to predict the surrounding window of context words. The skip-gram architecture weighs nearby context words more heavily than more distant context words. According to the authors' note, CBOW is faster while skip-gram does a better job for infrequent words. After the model is trained, the learned word embeddings are positioned in the vector space such that words that share common contexts in the corpus — that is, words that are semantically and syntactically similar — are located close to one another in the space. More dissimilar words are located farther from one another in the space. == Mathematical details == This section is based on expositions. A corpus is a sequence of words. Both CBOW and skip-gram are methods to learn one vector per word appearing in the corpus. Let V {\displaystyle V} ("vocabulary") be the set of all words appearing in the corpus C {\displaystyle C} . Our goal is to learn one vector v w ∈ R d {\displaystyle v_{w}\in \mathbb {R} ^{d}} for each word w ∈ V {\displaystyle w\in V} . The idea of skip-gram is that the vector of a word should be close to the vector of each of its neighbors. The idea of CBOW is that the vector-sum of a word's neighbors should be close to the vector of the word. === Continuous bag-of-words (CBOW) === The idea of CBOW is to represent each word with a vector, such that it is possible to predict a word using the sum of the vectors of its neighbors. Specifically, for each word w i {\displaystyle w_{i}} in the corpus, the one-hot encoding of the word is used as the input to the neural network. The output of the neural network is a probability distribution over the dictionary, representing a prediction of individual words in the neighborhood of w i {\displaystyle w_{i}} . The objective of training is to maximize ∑ i ln ⁡ Pr ( w i ∣ w i + j : j ∈ N ) {\displaystyle \sum _{i}\ln \Pr(w_{i}\mid w_{i+j}\colon j\in N)} where N {\displaystyle N} is a set of (non-zero) indices representing the relative locations of nearby words considered to be in w i {\displaystyle w_{i}} 's neighborhood. For example, if we want each word in the corpus to be predicted by every other word in a small span of 4 words. The set of relative indexes of neighbor words will be: N = { − 2 , − 1 , + 1 , + 2 } {\displaystyle N=\{-2,-1,+1,+2\}} , and the objective is to maximize ∑ i ln ⁡ Pr ( w i ∣ w i − 2 , w i − 1 , w i + 1 , w i + 2 ) {\displaystyle \sum _{i}\ln \Pr(w_{i}\mid w_{i-2},w_{i-1},w_{i+1},w_{i+2})} . In standard bag-of-words, a word's context is represented by a word-count (aka a word histogram) of its neighboring words. For example, the "sat" in "the cat sat on the mat" is represented as {"the": 2, "cat": 1, "on": 1}. Note that the last word "mat" is not used to represent "sat", because it is outside the neighborhood N = { − 2 , − 1 , + 1 , + 2 } {\displaystyle N=\{-2,-1,+1,+2\}} . In continuous bag-of-words, the histogram is multiplied by a matrix V {\displaystyle V} to obtain a continuous representation of the word's context. The matrix V {\displaystyle V} is also called a dictionary. Its columns are the word vectors. It has D {\displaystyle D} columns, where D {\displaystyle D} is the size of the dictionary. Let d {\displaystyle d} be the length of each word vector. We have V ∈ R d × D {\displaystyle V\in \mathbb {R} ^{d\times D}} . For example, multiplying the word histogram {"the": 2, "cat": 1, "on": 1} with V {\displaystyle V} , we obtain 2 v the + v cat + v on {\displaystyle 2v_{\text{the}}+v_{\text{cat}}+v_{\text{on}}} . This is then multiplied with another matrix V ′ {\displaystyle V'} of shape R D × d {\displaystyle \mathbb {R} ^{D\times d}} . Each row of it is a word vector v ′ {\displaystyle v'} . This results in a vector of length D {\displaystyle D} , one entry per dictionary entry. Then, apply the softmax to obtain a probability distribution over the dictionary. This system can be visualized as a neural network, similar in spirit to an autoencoder, of architecture linear-linear-softmax, as depicted in the diagram. The system is trained by gradient descent to minimize the cross-entropy loss. In full formula, the cross-entropy loss is: − ∑ i ln ⁡ e v w i ′ ⋅ ( ∑ j ∈ N v w j + i ) ∑ w ′ e v w ′ ′ ⋅ ( ∑ j ∈ N v w j + i ) {\displaystyle -\sum _{i}\ln {\frac {e^{v_{w_{i}}'\cdot (\sum _{j\in N}v_{w_{j+i}})}}{\sum _{w'}e^{v_{w'}'\cdot (\sum _{j\in N}v_{w_{j+i}})}}}} where the outer summation ∑ i {\displaystyle \sum _{i}} is over the words in a corpus, the quantity ∑ j ∈ N v w j + i {\displaystyle \sum _{j\in N}v_{w_{j+i}}} is the sum of a word's neighbors' vectors, etc. Once such a system is trained, we have two trained matrices V , V ′ {\displaystyle V,V'} . Either the column vectors of V {\displaystyle V} or the row vectors of V ′ {\displaystyle V'} can serve as the dictionary. For example, the word "sat" can be represented as either the "sat"-th column of V {\displaystyle V} or the "sat"-th row of V ′ {\displaystyle V'} . It is also possible to simply define V ′ = V ⊤ {\displaystyle V'=V^{\top }} , in which case there would no longer be a choice. === Skip-gram === The idea of skip-gram is to represent each word with a vector, such that it is possible to predict the vectors of its neighbors using the vector of a word. The architecture is still linear-linear-softmax, the same as CBOW, but the input and the output are switched. Specifically, for each word w i {\displaystyle w_{i}} in the corpus, the one-hot encoding of the word is used as the input to the neural network. The output of the neural network is a probability distribution over the dictionary, representing a prediction of individual words in the neighborhood of w i {\displaystyle w_{i}} . The objective of training is to maximize ∑ i ∑ j ∈ N ln ⁡ Pr ( w j + i ∣ w i ) {\displaystyle \sum _{i}\sum _{j\in N}\ln \Pr(w_{j+i}\mid w_{i})} . In full formula, the loss function is − ∑ i ∑ j ∈ N ln ⁡ e v w j + i ′ ⋅ v w i ∑ w ′ e v w ′ ′ ⋅ v w i {\displaystyle -\sum _{i}\sum _{j\in N}\ln {\frac {e^{v_{w_{j+i}}'\cdot v_{w_{i}}}}{\sum _{w'}e^{v_{w'}'\cdot v_{w_{i}}}}}} Same as CBOW, once such a system is trained, we have two trained matrices V , V ′ {\displaystyle V,V'} . Either the column vectors of V {\displaystyle V} or the row vectors of V ′ {\displaystyle V'} can serve as the dictionary. It is also possible to simply define V ′ = V ⊤ {\displaystyle V'=V^{\top }} , in which case there would no longer be a choice. Essentially, skip-gram and CBOW are exactly the same in architecture. They only differ in the objective function during training. == History == During the 1980s, there were some early attempts at using neural networks to represent words and concepts as vectors. In 2010, Tomáš Mikolov (then at Brno University of Technology) with co-authors applied a simple recurrent neural network with a single hidden

  Read more →
• 

  Taguchi loss function

  The Taguchi loss function is graphical depiction of loss developed by the Japanese business statistician Genichi Taguchi to describe a phenomenon affecting the value of products produced by a company. Praised by Dr. W. Edwards Deming (the business guru of the 1980s American quality movement), it made clear the concept that quality does not suddenly plummet when, for instance, a machinist exceeds a rigid blueprint tolerance. Instead 'loss' in value progressively increases as variation increases from the intended condition. This was considered a breakthrough in describing quality, and helped fuel the continuous improvement movement. The concept of Taguchi's quality loss function was in contrast with the American concept of quality, popularly known as goal post philosophy, the concept given by American quality guru Phil Crosby. Goal post philosophy emphasizes that if a product feature doesn't meet the designed specifications it is termed as a product of poor quality (rejected), irrespective of amount of deviation from the target value (mean value of tolerance zone). This concept has similarity with the concept of scoring a 'goal' in the game of football or hockey, because a goal is counted 'one' irrespective of the location of strike of the ball in the 'goal post', whether it is in the center or towards the corner. This means that if the product dimension goes out of the tolerance limit the quality of the product drops suddenly. Through his concept of the quality loss function, Taguchi explained that from the customer's point of view this drop of quality is not sudden. The customer experiences a loss of quality the moment product specification deviates from the 'target value'. This 'loss' is depicted by a quality loss function and it follows a parabolic curve mathematically given by L = k(y–m)2, where m is the theoretical 'target value' or 'mean value' and y is the actual size of the product, k is a constant and L is the loss. This means that if the difference between 'actual size' and 'target value' i.e. (y–m) is large, loss would be more, irrespective of tolerance specifications. In Taguchi's view tolerance specifications are given by engineers and not by customers; what the customer experiences is 'loss'. This equation is true for a single product; if 'loss' is to be calculated for multiple products the loss function is given by L = k[S2 + ( y ¯ {\displaystyle {\bar {y}}} – m)2], where S2 is the 'variance of product size' and y ¯ {\displaystyle {\bar {y}}} is the average product size. == Overview == The Taguchi loss function is important for a number of reasons—primarily, to help engineers better understand the importance of designing for variation.

  Read more →
• 

  Neighborhood operation

  In computer vision and image processing a neighborhood operation is a commonly used class of computations on image data which implies that it is processed according to the following pseudo code: Visit each point p in the image data and do { N = a neighborhood or region of the image data around the point p result(p) = f(N) } This general procedure can be applied to image data of arbitrary dimensionality. Also, the image data on which the operation is applied does not have to be defined in terms of intensity or color, it can be any type of information which is organized as a function of spatial (and possibly temporal) variables in p. The result of applying a neighborhood operation on an image is again something which can be interpreted as an image, it has the same dimension as the original data. The value at each image point, however, does not have to be directly related to intensity or color. Instead it is an element in the range of the function f, which can be of arbitrary type. Normally the neighborhood N is of fixed size and is a square (or a cube, depending on the dimensionality of the image data) centered on the point p. Also the function f is fixed, but may in some cases have parameters which can vary with p, see below. In the simplest case, the neighborhood N may be only a single point. This type of operation is often referred to as a point-wise operation. == Examples == The most common examples of a neighborhood operation use a fixed function f which in addition is linear, that is, the computation consists of a linear shift invariant operation. In this case, the neighborhood operation corresponds to the convolution operation. A typical example is convolution with a low-pass filter, where the result can be interpreted in terms of local averages of the image data around each image point. Other examples are computation of local derivatives of the image data. It is also rather common to use a fixed but non-linear function f. This includes median filtering, and computation of local variances. The Nagao-Matsuyama filter is an example of a complex local neighbourhood operation that uses variance as an indicator of the uniformity within a pixel group. The result is similar to a convolution with a low-pass filter with the added effect of preserving sharp edges. There is also a class of neighborhood operations in which the function f has additional parameters which can vary with p: Visit each point p in the image data and do { N = a neighborhood or region of the image data around the point p result(p) = f(N, parameters(p)) } This implies that the result is not shift invariant. Examples are adaptive Wiener filters. == Implementation aspects == The pseudo code given above suggests that a neighborhood operation is implemented in terms of an outer loop over all image points. However, since the results are independent, the image points can be visited in arbitrary order, or can even be processed in parallel. Furthermore, in the case of linear shift-invariant operations, the computation of f at each point implies a summation of products between the image data and the filter coefficients. The implementation of this neighborhood operation can then be made by having the summation loop outside the loop over all image points. An important issue related to neighborhood operation is how to deal with the fact that the neighborhood N becomes more or less undefined for points p close to the edge or border of the image data. Several strategies have been proposed: Compute result only for points p for which the corresponding neighborhood is well-defined. This implies that the output image will be somewhat smaller than the input image. Zero padding: Extend the input image sufficiently by adding extra points outside the original image which are set to zero. The loops over the image points described above visit only the original image points. Border extension: Extend the input image sufficiently by adding extra points outside the original image which are set to the image value at the closest image point. The loops over the image points described above visit only the original image points. Mirror extension: Extend the image sufficiently much by mirroring the image at the image boundaries. This method is less sensitive to local variations at the image boundary than border extension. Wrapping: The image is tiled, so that going off one edge wraps around to the opposite side of the image. This method assumes that the image is largely homogeneous, for example a stochastic image texture without large textons.

  Read more →
• 

  Margin-infused relaxed algorithm

  Margin-infused relaxed algorithm (MIRA) is a machine learning and online algorithm for multiclass classification problems. It is designed to learn a set of parameters (vector or matrix) by processing all the given training examples one-by-one and updating the parameters according to each training example, so that the current training example is classified correctly with a margin against incorrect classifications at least as large as their loss. The change of the parameters is kept as small as possible. A two-class version called binary MIRA simplifies the algorithm by not requiring the solution of a quadratic programming problem (see below). When used in a one-vs-all configuration, binary MIRA can be extended to a multiclass learner that approximates full MIRA, but may be faster to train. The flow of the algorithm looks as follows: The update step is then formalized as a quadratic programming problem: Find m i n ‖ w ( i + 1 ) − w ( i ) ‖ {\displaystyle min\|w^{(i+1)}-w^{(i)}\|} , so that s c o r e ( x t , y t ) − s c o r e ( x t , y ′ ) ≥ L ( y t , y ′ ) ∀ y ′ {\displaystyle score(x_{t},y_{t})-score(x_{t},y')\geq L(y_{t},y')\ \forall y'} , i.e. the score of the current correct training y {\displaystyle y} must be greater than the score of any other possible y ′ {\displaystyle y'} by at least the loss (number of errors) of that y ′ {\displaystyle y'} in comparison to y {\displaystyle y} .

  Read more →
• 

  Latent class model

  In statistics, a latent class model (LCM) is a model for clustering multivariate discrete data. It assumes that the data arise from a mixture of discrete distributions, within each of which the variables are independent. It is called a latent class model because the class to which each data point belongs is unobserved (or latent). Latent class analysis (LCA) is a subset of structural equation modeling used to find groups or subtypes of cases in multivariate categorical data. These groups or subtypes of cases are called "latent classes". When faced with the following situation, a researcher might opt to use LCA to better understand the data: Symptoms a, b, c, and d have been recorded in a variety of patients diagnosed with diseases X, Y, and Z. Disease X is associated with symptoms a, b, and c; disease Y is linked to symptoms b, c, and d; and disease Z is connected to symptoms a, c, and d. In this context, the LCA would attempt to detect the presence of latent classes (i.e., the disease entities), thus creating patterns of association in the symptoms. As in factor analysis, LCA can also be used to classify cases according to their maximum likelihood class membership probability. The key criterion for resolving the LCA is identifying latent classes in which the observed symptom associations are effectively rendered null. This is because within each class, the diseases responsible for the symptoms create a structure of dependencies. As a result, the symptoms become conditionally independent, meaning that, given the class a case belongs to, the symptoms are no longer related to one another. == Model == Within each latent class, the observed variables are statistically independent—an essential aspect of latent class modeling. Usually, the observed variables are statistically dependent. By introducing the latent variable, independence is restored in the sense that within classes, variables are independent (local independence). Therefore, the association between the observed variables is explained by the classes of the latent variable (McCutcheon, 1987). In one form, the LCM is written as p i 1 , i 2 , … , i N ≈ ∑ t T p t ∏ n N p i n , t n , {\displaystyle p_{i_{1},i_{2},\ldots ,i_{N}}\approx \sum _{t}^{T}p_{t}\,\prod _{n}^{N}p_{i_{n},t}^{n},} where T {\displaystyle T} is the number of latent classes and p t {\displaystyle p_{t}} are the so-called recruitment or unconditional probabilities that should sum to one. p i n , t n {\displaystyle p_{i_{n},t}^{n}} are the marginal or conditional probabilities. For a two-way latent class model, the form is p i j ≈ ∑ t T p t p i t p j t . {\displaystyle p_{ij}\approx \sum _{t}^{T}p_{t}\,p_{it}\,p_{jt}.} This two-way model is related to probabilistic latent semantic analysis and non-negative matrix factorization. The probability model used in LCA is closely related to the Naive Bayes classifier. The main difference is that in LCA, the class membership of an individual is a latent variable, whereas in Naive Bayes classifiers, the class membership is an observed label. == Related methods == There are a number of methods with distinct names and uses that share a common relationship. Cluster analysis is, like LCA, used to discover taxon-like groups of cases in data. Multivariate mixture estimation (MME) is applicable to continuous data and assumes that such data arise from a mixture of distributions, such as a set of heights arising from a mixture of men and women. If a multivariate mixture estimation is constrained so that measures must be uncorrelated within each distribution, it is termed latent profile analysis. Modified to handle discrete data, this constrained analysis is known as LCA. Discrete latent trait models further constrain the classes to form from segments of a single dimension, allocating members to classes based on that dimension. An example would be assigning cases to social classes based on ability or merit. In a practical instance, the variables could be multiple choice items of a political questionnaire. In this case, the data consists of an N-way contingency table with answers to the items for a number of respondents. In this example, the latent variable refers to political opinion, and the latent classes to political groups. Given group membership, the conditional probabilities specify the chance that certain answers are chosen. == Application == LCA may be used in many fields, such as: collaborative filtering, Behavior Genetics and Evaluation of diagnostic tests.

  Read more →