AI Content Udemy

AI Content Udemy — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Cyclodisparity

In vision science, cyclodisparity is the difference in the rotation angle of an object or scene viewed by the left and right eyes. Cyclodisparity can result from the eyes' torsional rotation (cyclorotation) or can be created artificially by presenting to the eyes two images that need to be rotated relative to each other for binocular fusion to take place. == Human and animal vision == The eyes and visual system can compensate for cyclodisparity up to a certain point; if the cyclodisparity is larger than a threshold, the images cannot be fused, resulting stereoblindness, and in double vision in subjects who otherwise have full stereo vision. When a human subject is presented with images that have artificial cyclodisparity, cyclovergence is evoked, that is, a motor response of the eye muscles that rotates the two eyes in opposite directions, thereby reducing cyclodisparity. Visually-induced cyclovergence of up to 8 degrees has been observed in normal subjects. Furthermore, up to about 8 degrees can usually be compensated by purely sensory means, that is, without physical eye rotation. This means that the normal human observer can achieve binocular image fusion in presence of cyclodisparity of up to approximately 16 degrees. Cyclodisparity due to images having been rotated inward can be compensated better when the gaze is directed downwards, and cyclodisparity due to an outward rotation can be compensated better when the gaze is directed upwards. A proposed explanation for this phenomenon is that the motor system is coordinated in such a way that the eyes perform a torsional movement to reduce the size of the search zones and thus the computational load required for solving the correspondence problem. The resulting cyclovergence at near gaze is smaller than the cyclovergence predicted by Listing's law. == Video processing and computer vision == Active camera torsion can be used in machine and computer vision for several purposes. For instance, camera torsion can be used to make improved use of the search range over which matching detectors or stereo matching algorithms operate, or to make a 3D slanted surface appear frontoparallel for further stereo processing. For image compression purposes, images with cyclodisparity are advantageously encoded using global motion compensation using a rotational motion model.
Read more →
Research software engineering

Research software engineering is the application of software engineering practices, methods and techniques for research software, i.e. software that was made for and is mainly used within research projects. As usual for software engineering, this also includes knowledge of other (and in this case varying) research fields as well as open science that need to be incorporated into a software development process. The term was proposed in a research paper in 2010 in response to an empirical survey on tools used for software development in research projects. It started to be used in United Kingdom in 2012, when it was needed to define the type of software development needed in research. This focuses on reproducibility, reusability, and accuracy of data analysis and applications created for research. == Support == Various type of associations and organisations have been created around this role to support the creation of posts in universities and research institutes. In 2014 a Research Software Engineer Association was created in UK, which attracted 160 members in the first three months and which lead to the creation of the Society of Research Software Engineering in 2019. Other countries like the Netherlands, Germany, and the USA followed creating similar communities and there are similar efforts being pursued in Asia, Australia, Canada, New Zealand, the Nordic countries, and Belgium. In January 2021 the International Council of RSE Associations was introduced. UK counts over 40 universities and institutes with groups that provide access to software expertise to different areas of research. Additionally, the Engineering and Physical Sciences Research Council created a Research Software Engineer fellowship to promote this role and help the creation of RSE groups across UK, with calls in 2015, 2017, and 2020. The world first RSE conference took place in UK in September 2016 and it has been repeated annually (except for a gap in 2020) since. In 2019 the first national RSE conferences in Germany and the Netherlands were held, next editions were planned for 2020 and then cancelled. US-RSE held its first national conference in 2023. The Research Software Alliance was formed in 2019 to advance the global research software ecosystem by collaborating with decision makers and key influencers. The SORSE (A Series of Online Research Software Events) community was established in late‑2020 in response to the COVID-19 pandemic and ran its first online event in September 2020.
Read more →
SurveyLab

SurveyLab is an online system designed for creating and deploying surveys, questionnaires, web forms, tests, and quizzes. The platform functions as a web application, without the need for additional software installation. Founded in 2006, by the Polish company 7 Points, SurveyLab is used by businesses and professional users for market research, human resources assessments, customer feedback, and academic research. == History == SurveyLab was launched in 2006 under the name MySurveyLab, developed by the Warsaw-based company 7 Points. Early media coverage described the system as supporting online survey creation, real-time reporting, group collaboration and question logic, and noted that the platform was opened to custom feature development. MySurveyLab featured multi-user accounts, SSL-secured surveys, and support for right-to-left languages. Further 2010s updates improved reporting capabilities, expanded question types, and integration options. In 2020, the platform was rebranded to SurveyLab. By the early 2020s, the software supported integrations with external tools including Zapier, and offered additional analytics features. In 2025, 7 Points reported that SurveyLab had over 85,000 registered users and had processed over 7 million surveys. == Functionalities == SurveyLab is a web-based platform used for creating online surveys, questionnaires, and forms. Independent reviewers and software directories describe it as a tool used for market research, customer feedback management, and human resources-related assessments, including employee feedback surveys. According to the creators at 7 Points, SurveyLab supports customer satisfaction measurement, survey analysis, and 360-degree feedback evaluations. The platform allows users to create surveys with no limits on the number of questions or responses. Independent reviews describe SurveyLab as offering multiple-choice, matrix, rating-scale, and open-ended questions. According to 7 Points, the platform manages market-research workflows, including Net Promoter Score, Customer Satisfaction, and Customer Effort Score questions. The tool can also re-use previous answers in later questions, and create A/B survey variants. SurveyLab can integrate with external services and applications through APIs and third-party connectors. According to its developers, the platform can connect with customer service tools, as well as CRM, marketing automation, e-commerce, and data-storage tools An industry review cited workflow integrations with CINT, Slack, Salesforce, and Zendesk Other integrations included Aquera (SSO), Sona Systems (internet research), and Synerise (customer data management). == Data collection and aggregation == Independent descriptions note that SurveyLab can combine results from emails, SMS, website widgets and pop-ups, QR codes, and social media. Its surveys are also accessible through mobile apps on iOS and Android, used for online and offline data collection in the field. Developers state that the tool supports exporting data as CSV, Excel, and SPSS, with independent reviews also mentioning PDF and PowerPoint. SurveyLab can automate response collection through a multi-channel survey distribution and reporting. It includes data trends, offline responses, and reminders to non-respondents. According to its documentation, newer versions include AI-based tools that detect and analyze sentiment, and a survey builder generating questionnaires based on user prompts. === Data security and compliance === According to 7 Points, SurveyLab provides password-protected surveys, token-based access, IP-address filtering, and two-factor authentication for user accounts, and it complies with the General Data Protection Regulation. == Awards and accolades == In 2017, SurveyLab was listed in Capterra’s Top 20 Survey Software ranking, among 20 highest-scoring survey tools based on market presence and user base. In 2018, a software review platform FinancesOnline awarded SurveyLab the Rising Star Award and the Great User Experience Award, distinctions given to products that demonstrate positive user satisfaction and strong usability characteristics.
Read more →
Mobile simulator

A mobile simulator is a software application for a personal computer which creates a virtual machine version of a mobile device, such as a mobile phone, iPhone, other smartphone, or calculator, on the computer. This may sometimes also be termed an emulator. The mobile simulator allows the user to use features and run applications on the virtual mobile on their computer as though it was the actual mobile device. A mobile simulator lets you test a website and determine how well it performs on various types of mobile devices. A good simulator tests mobile content quickly on multiple browsers and emulates several device profiles simultaneously. This allows analysis of mobile content in real-time, locate errors in code, view rendering in an environment that simulates the mobile browser, and optimize the site for performance. Mobile simulators may be developed using programming languages such as Java, .NET and JavaScript.
Read more →
Web development tools

Web development tools (often abbreviated to dev tools) allow web developers to test, modify and debug their websites. They are different from website builders and integrated development environments (IDEs) in that they do not assist in the direct creation of a webpage, rather they are tools used for testing the user interface of a website or web application. Web development tools come as browser add-ons or built-in features in modern web browsers. Browsers such as Google Chrome, Firefox, Safari, Microsoft Edge, and Opera have built-in tools to help web developers, and many additional add-ons can be found in their respective plugin download centers. Web development tools allow developers to work with a variety of web technologies, including HTML, CSS, the DOM, JavaScript, and other components that are handled by the web browser. == History and support == Early web developers manually debugged their websites by commenting out code and using JavaScript functions. One of the first browser debugging tools to exist was Mozilla's Firebug extension, which possessed many of the current core features of today's developer tools, leading to Firefox becoming popular with developers at the time. Safari's WebKit engine also introduced its integrated developer tools around that period, which eventually became the basis for both Safari and Chrome's current tooling. Microsoft released a developer toolbar for Internet Explorer 6 and 7; and then integrated them into the browser from version 8 onwards. In 2017, Mozilla discontinued Firebug in favour of integrated developer tools. Nowadays, all modern web browsers have support for web developer tools that allow web designers and developers to look at the make-up of their pages. These are all tools that are built into the browser and do not require additional modules or configuration. Firefox – F12 opens the Firefox DevTools. Google Chrome and Opera – Developer Tools (DevTools) Microsoft Edge – F12 opens Web Developer Tools. Microsoft incorporates additional features that are not included in mainline Chromium. Safari – The Safari Web Inspector has to be enabled from its settings pane. == Features == The built-in web developer tools in the browser are commonly accessed by hovering over an item on a webpage and selecting the "Inspect Element" or similar option from the context menu. Alternatively the F12 key tends to be another common shortcut. === HTML and the DOM === HTML and DOM viewer and editor is commonly included in the built-in web development tools. The difference between the HTML and DOM viewer, and the view source feature in web browsers is that the HTML and DOM viewer allows you to see the DOM as it was rendered in addition to allowing you to make changes to the HTML and DOM and see the change reflected in the page after the change is made. In addition to selecting and editing, the HTML elements panels will usually also display properties of the DOM object, such as display dimension, and CSS properties. Firefox, Safari, Chrome, and Edge all allow users to simulate the document on a mobile device by modifying the viewport dimensions and pixel density. Additionally, Firefox and Chrome both have the option to simulate colour blindness for the page. === Web page assets, resources and network information === Web pages typically load and require additional content in the form of images, scripts, font and other external files. Web development tools also allow developers to inspect resources that are loaded and available on the web page in a tree-structure listing, and the appearance of style sheets can be tested in real time. Web development tools also allow developers to view information about the network usage, such as viewing what the loading time and bandwidth usage are and which HTTP headers are being sent and received. Developers can manipulate and resend network requests. === Profiling and auditing === Profiling allows developers to capture information about the performance of a web page or web application. With this information developers can improve the performance of their scripts. Auditing features may provide developers suggestions, after analyzing a page, for optimizations to decrease page load time and increase responsiveness. Web development tools typically also provide a record of the time it takes to render the page, memory usage, and the types of events which are taking place. These features allow developers to optimize their web page or web application. ==== JavaScript debugging ==== JavaScript is commonly used in web browsers. Web development tools commonly include a debugger panel for scripts by allowing developers to add watch expressions, breakpoints, view the call stack, and pause, continue, and step while debugging JavaScript. A console is also often included, which allow developers to type in JavaScript commands and call functions, or view errors that may have been encountered during the execution of a script. === Extensions === The devtools API allows browser extensions to add their own features to developer tools.
Read more →
Amazon Kinesis

Amazon Kinesis is a family of services provided by Amazon Web Services (AWS) for processing and analyzing real-time streaming data at a large scale. Launched in November 2013, it offers developers the ability to build applications that can consume and process data from multiple sources simultaneously. Kinesis supports multiple use cases, including real-time analytics, log and event data collection, and real-time processing of data generated by IoT devices. == History == Amazon Kinesis was launched by Amazon Web Services (AWS) in November 2013 as a managed service for processing and analyzing real-time streaming data at a large scale. The service was introduced to address the growing need for businesses to process and analyze data as it was generated, rather than in batches, allowing for real-time insights and decision-making. Since its launch, the Amazon Kinesis family of services has expanded to include four main components: Kinesis Data Streams, Kinesis Data Firehose, Kinesis Data Analytics, and Kinesis Video Streams. Each of these components serves a specific purpose in the processing and analysis of real-time streaming data. In August 2015, AWS announced the availability of Kinesis Data Firehose, a fully managed service for delivering real-time streaming data to destinations such as Amazon S3, Amazon Redshift, and Amazon Elasticsearch. A year later in August 2016, AWS launched Kinesis Data Analytics, enabling customers to analyze streaming data in real time using standard SQL queries. AWS introduced Kinesis Video Streams, a fully managed service for securely capturing, processing, and storing video streams for analytics and machine learning applications, was introduced by AWS in November 2017. == Components == Amazon Kinesis is composed of four main services: Kinesis Data Streams, Kinesis Data Firehose, Kinesis Data Analytics, and Kinesis Video Streams. === Kinesis Data Streams === Kinesis Data Streams is a scalable and durable real-time data streaming service that captures and processes gigabytes of data per second from multiple sources. It enables the storage and processing of data in real time, making it useful for applications that require immediate insights, such as monitoring and alerting. === Kinesis Data Firehose === Kinesis Data Firehose is a fully managed service for delivering real-time streaming data to destinations such as Amazon S3, Amazon Redshift, Amazon Elasticsearch, and AWS-partner data stores. With Data Firehose, users can configure and scale data delivery without manual intervention. === Kinesis Data Analytics === Kinesis Data Analytics enables the analysis of streaming data in real time using standard SQL or Apache Flink. === Kinesis Video Streams === Kinesis Video Streams is a fully managed service for securely capturing, processing, and storing video streams for analytics and machine learning. It supports multiple video codecs and streaming protocols, making it suitable for various use cases, such as security and surveillance, video-enabled IoT devices, and live event broadcasting. == Integration == Amazon Kinesis can be easily integrated with other AWS services, such as AWS Lambda, Amazon S3, Amazon Redshift, and Amazon OpenSearch. This integration enables developers to build end-to-end streaming data processing applications, taking advantage of the extensive AWS ecosystem. == Use cases == Some common use cases for Amazon Kinesis include: Real-time analytics: Analyzing streaming data in real time to provide immediate insights and make data-driven decisions. Log and event data collection: Collecting, processing, and analyzing log and event data generated by applications, infrastructure, and devices. IoT data processing: Processing and analyzing large volumes of data generated by IoT devices in real time. Machine learning: Ingesting and processing video streams for machine learning applications, such as object recognition, facial recognition, and sentiment analysis. == Pricing == Amazon Kinesis follows a pay-as-you-go pricing model, with costs depending on the chosen service, data volume, and processing power required. AWS provides a free tier for Kinesis Data Streams and Kinesis Data Firehose, allowing users to get started with the services at no cost.
Read more →
Software diversity

Software diversity is a research field about the comprehension and engineering of diversity in the context of software. == Areas == The different areas of software diversity are discussed in surveys on diversity for fault-tolerance or for security. The main areas are: design diversity, n-version programming, data diversity for fault tolerance randomization software variability == Techniques == === Code transformations === It is possible to amplify software diversity through automated transformation processes that create synthetic diversity. A "multicompiler" is compiler embedding a diversification engine. A multi-variant execution environment (MVEE) is responsible for selecting the variant to execute and compare the output. Fred Cohen was among the very early promoters of such an approach. He proposed a series of rewriting and code reordering transformations that aim at producing massive quantities of different versions of operating systems functions. These ideas have been developed over the years and have led to the construction of integrated obfuscation schemes to protect key functions in large software systems. Another approach to increase software diversity of protection consists in adding randomness in certain core processes, such as memory loading. Randomness implies that all versions of the same program run differently from each other, which in turn creates a diversity of program behaviors. This idea was initially proposed and experimented by Stephanie Forrest and her colleagues. Recent work on automatic software diversity explores different forms of program transformations that slightly vary the behavior of programs. The goal is to evolve one program into a population of diverse programs that all provide similar services to users, but with a different code. This diversity of code enhances the protection of users against one single attack that could crash all programs at the same time. Transformation operators include: code layout randomization: reorder functions in code globals layout randomization: reorder and pad globals stack variable randomization: reorder variables in each stack frame heap layout randomization === Natural software diversity === It is known that some functionalities are available in multiple interchangeable implementations. This natural diversity can be exploited, for example it has been shown valuable to increase security in cloud systems.
Read more →
MyPoolin

Mypoolin is a mobile peer-to-peer and group payment application. Their software allows the settling of debts and group-expenditure for events and activities. The software utilizes Unified Payment Interface of India to collect and settle daily expenses with friends. Users can also plan and pay together for group-gifting, movies, vacations, concerts, events, and parties. == Service == Mypoolin is a mobile payment provider that lets its users transfer money to other users via their mobile number. A user can create an account by verifying an OTP code which is sent to his mobile phone. It also allows the users to track their friends’ activities on the app. == History == Mypoolin was founded by Rohit Taneja (IIT Delhi) and Ankit Singh (FMS Delhi) in 2014 as a medium to aggregate money for various purposes in a hassle free and quick manner. Prior to the mobile app launch, Mypoolin was initially launched as a web application. == Funding == Mypoolin has been seed funded by angel investors. As winners of the QPrize 2015, Mypoolin jointly received an additional funding of $250,000 from Qualcomm Ventures. == Growth == Mypoolin reached INR 10 lakhs in revenue during its first four months of the web application launch, and was listed in the "Top ten free apps" in its category within the first 5 days of the Android app launch. It was one of the Top 50 start-ups in Asia at the Echelon Asia Summit held in Singapore. And among the top 3 start-ups in 1776 Cup Challenge 2016. Apple Inc also featured the app on their app store in India. == Features == Users are able to collect and share money on the app for daily uses like movies, events and trips. The money collected can then be redeemed in the form of an online voucher redeemable across several e-commerce sites. The amount can be redeemed also in the form of an offline debit card delivered to the address or in the form of a wire transfer. == Media coverage == Mypoolin was featured in The Economic Times and The Hindu Business Line after winning the Qualcomm Ventures' QPrize 2015. Digit magazine featured them recently as the app of the week. The app has mostly grown organically so far in the Indian urban millennial space.
Read more →
Curse of dimensionality

The curse of dimensionality refers to various phenomena that arise when analyzing and organizing data in high-dimensional spaces that do not occur in low-dimensional settings such as the three-dimensional physical space of everyday experience. The expression was coined by Richard E. Bellman when considering problems in dynamic programming. The curse generally refers to issues that arise when the number of datapoints is small (in a suitably defined sense) relative to the intrinsic dimension of the data. Dimensionally cursed phenomena occur in domains such as numerical analysis, sampling, combinatorics, machine learning, data mining and databases. The common theme of these problems is that when the dimensionality increases, the volume of the space increases so fast that the available data becomes sparse. In order to obtain a reliable result, the amount of data needed often grows exponentially with the dimensionality. Also, organizing and searching data often relies on detecting areas where objects form groups with similar properties; in high dimensional data, however, all objects appear to be sparse and dissimilar in many ways, which prevents common data organization strategies from being efficient. == Domains == === Combinatorics === In some problems, each variable can take one of several discrete values, or the range of possible values is divided to give a finite number of possibilities. Taking the variables together, a huge number of combinations of values must be considered. This effect is also known as the combinatorial explosion. Even in the simplest case of d {\displaystyle d} binary variables, the number of possible combinations already is 2 d {\displaystyle 2^{d}} , exponential in the dimensionality. Naively, each additional dimension doubles the effort needed to try all combinations. === Sampling === There is an exponential increase in volume associated with adding extra dimensions to a mathematical space. For example, 102 = 100 evenly spaced sample points suffice to sample a unit interval (try to visualize a "1-dimensional" cube, i.e. a line) with no more than 10−2 = 0.01 distance between points; an equivalent sampling of a 10-dimensional unit hypercube with a lattice that has a spacing of 10−2 = 0.01 between adjacent points would require 1020 = [(102)10] sample points. In general, with a spacing distance of 10−n the 10-dimensional hypercube appears to be a factor of 10n(10−1) = [(10n)10/(10n)] "larger" than the 1-dimensional hypercube, which is the unit interval. In the above example n = 2: when using a sampling distance of 0.01 the 10-dimensional hypercube appears to be 1018 "larger" than the unit interval. This effect is a combination of the combinatorics problems above and the distance function problems explained below. === Optimization === When solving dynamic optimization problems by numerical backward induction, the objective function must be computed for each combination of values. This is a significant obstacle when the dimension of the "state variable" is large. === Machine learning === In machine learning problems that involve learning a "state-of-nature" from a finite number of data samples in a high-dimensional feature space with each feature having a range of possible values, typically an enormous amount of training data is required to ensure that there are several samples with each combination of values. In an abstract sense, as the number of features or dimensions grows, the amount of data we need to generalize accurately grows exponentially. A typical rule of thumb is that there should be at least 5 training examples for each dimension in the representation. In machine learning and insofar as predictive performance is concerned, the curse of dimensionality is used interchangeably with the peaking phenomenon, which is also known as Hughes phenomenon. This phenomenon states that with a fixed number of training samples, the average (expected) predictive power of a classifier or regressor first increases as the number of dimensions or features used is increased but beyond a certain dimensionality it starts deteriorating instead of improving steadily. Nevertheless, in the context of a simple classifier (e.g., linear discriminant analysis in the multivariate Gaussian model under the assumption of a common known covariance matrix), Zollanvari et al. showed both analytically and empirically that as long as the relative cumulative efficacy of an additional feature set (with respect to features that are already part of the classifier) is greater (or less) than the size of this additional feature set, the expected error of the classifier constructed using these additional features will be less (or greater) than the expected error of the classifier constructed without them. In other words, both the size of additional features and their (relative) cumulative discriminatory effect are important in observing a decrease or increase in the average predictive power. In metric learning, higher dimensions can sometimes allow a model to achieve better performance. After normalizing embeddings to the surface of a hypersphere, FaceNet achieves the best performance using 128 dimensions as opposed to 64, 256, or 512 dimensions in one ablation study. A loss function for unitary-invariant dissimilarity between word embeddings was found to be minimized in high dimensions. === Data mining === In data mining, the curse of dimensionality refers to a data set with too many features. Consider the first table, which depicts 200 individuals and 2000 genes (features) with a 1 or 0 denoting whether or not they have a genetic mutation in that gene. A data mining application to this data set may be finding the correlation between specific genetic mutations and creating a classification algorithm such as a decision tree to determine whether an individual has cancer or not. A common practice of data mining in this domain would be to create association rules between genetic mutations that lead to the development of cancers. To do this, one would have to loop through each genetic mutation of each individual and find other genetic mutations that occur over a desired threshold and create pairs. They would start with pairs of two, then three, then four until they result in an empty set of pairs. The complexity of this algorithm can lead to calculating all permutations of gene pairs for each individual or row. Given the formula for calculating the permutations of n items with a group size of r is: n ! ( n − r ) ! {\displaystyle {\frac {n!}{(n-r)!}}} , calculating the number of three pair permutations of any given individual would be 7988004000 different pairs of genes to evaluate for each individual. The number of pairs created will grow by an order of factorial as the size of the pairs increase. The growth is depicted in the permutation table (see right). As we can see from the permutation table above, one of the major problems data miners face regarding the curse of dimensionality is that the space of possible parameter values grows exponentially or factorially as the number of features in the data set grows. This problem critically affects both computational time and space when searching for associations or optimal features to consider. Another problem data miners may face when dealing with too many features is that the number of false predictions or classifications tends to increase as the number of features grows in the data set. In terms of the classification problem discussed above, keeping every data point could lead to a higher number of false positives and false negatives in the model. This may seem counterintuitive, but consider the genetic mutation table from above, depicting all genetic mutations for each individual. Each genetic mutation, whether they correlate with cancer or not, will have some input or weight in the model that guides the decision-making process of the algorithm. There may be mutations that are outliers or ones that dominate the overall distribution of genetic mutations when in fact they do not correlate with cancer. These features may be working against one's model, making it more difficult to obtain optimal results. This problem is up to the data miner to solve, and there is no universal solution. The first step any data miner should take is to explore the data, in an attempt to gain an understanding of how it can be used to solve the problem. One must first understand what the data means, and what they are trying to discover before they can decide if anything must be removed from the data set. Then they can create or use a feature selection or dimensionality reduction algorithm to remove samples or features from the data set if they deem it necessary. One example of such methods is the interquartile range method, used to remove outliers in a data set by calculating the standard deviation of a feature or occurrence. === Distance function === When a measure such as a Euclidean distance is defined using many coordinat
Read more →
Circle Hough Transform

The circle Hough Transform (CHT) is a basic feature extraction technique used in digital image processing for detecting circles in imperfect images. The circle candidates are produced by “voting” in the Hough parameter space and then selecting local maxima in an accumulator matrix. It is a specialization of the Hough transform. == Theory == In a two-dimensional space, a circle can be described by: ( x − a ) 2 + ( y − b ) 2 = r 2 ( 1 ) {\displaystyle \left(x-a\right)^{2}+\left(y-b\right)^{2}=r^{2}\ \ \ \ \ (1)} where (a,b) is the center of the circle, and r is the radius. If a 2D point (x,y) is fixed, then the parameters can be found according to (1). The parameter space would be three dimensional, (a, b, r). And all the parameters that satisfy (x, y) would lie on the surface of an inverted right-angled cone whose apex is at (x, y, 0). In the 3D space, the circle parameters can be identified by the intersection of many conic surfaces that are defined by points on the 2D circle. This process can be divided into two stages. The first stage is fixing radius then find the optimal center of circles in a 2D parameter space. The second stage is to find the optimal radius in a one dimensional parameter space. === Find parameters with known radius R === If the radius is fixed, then the parameter space would be reduced to 2D (the position of the circle center). For each point (x, y) on the original circle, it can define a circle centered at (x, y) with radius R according to (1). The intersection point of all such circles in the parameter space would be corresponding to the center point of the original circle. Consider 4 points on a circle in the original image (left). The circle Hough transform is shown in the right. Note that the radius is assumed to be known. For each (x,y) of the four points (white points) in the original image, it can define a circle in the Hough parameter space centered at (x, y) with radius r. An accumulator matrix is used for tracking the intersection point. In the parameter space, the voting number of those points that have a newly defined circle passing through them would be increased by one for every circle. Then the local maxima point (the red point in the center in the right figure) can be found. The position (a, b) of the maxima would be the center of the original circle. === Multiple circles with known radius R === Multiple circles with same radius can be found with the same technique. Note that, in the accumulator matrix (right fig), there would be at least 3 local maxima points. === Accumulator matrix and voting === In practice, an accumulator matrix is introduced to find the intersection point in the parameter space. First, we need to divide the parameter space into “buckets” using a grid and produce an accumulator matrix according to the grid. The element in the accumulator matrix denotes the number of “circles” in the parameter space that are passing through the corresponding grid cell in the parameter space. The number is also called “voting number”. Initially, every element in the matrix is zeros. Then for each “edge” point in the original space, we can formulate a circle in the parameter space and increase the voting number of the grid cell which the circle passes through. This process is called “voting”. After voting, we can find local maxima in the accumulator matrix. The positions of the local maxima are corresponding to the circle centers in the original space. === Find circle parameter with unknown radius === Since the parameter space is 3D, the accumulator matrix would be 3D, too. We can iterate through possible radii; for each radius, we use the previous technique. Finally, find the local maxima in the 3D accumulator matrix. Accumulator array should be A[x,y,r] in the 3D space. Voting should be for each pixels, radius and theta A[x,y,r] += 1 The algorithm : For each A[a,b,r] = 0; Process the filtering algorithm on image Gaussian Blurring, convert the image to grayscale ( grayScaling), make Canny operator, The Canny operator gives the edges on image. Vote on all possible circles in accumulator. The local maximum voted circles of Accumulator A gives the circle Hough space. The maximum voted circle of Accumulator gives the circle. The Incrementing for Best Candidate : For each A[a,b,r] = 0; // fill with zeroes initially, instantiate 3D matrix For each cell(x,y) For each theta t = 0 to 360 // the possible theta 0 to 360 b = y – r sin(t PI / 180); //polar coordinate for center (convert to radians) a = x – r cos(t PI / 180); //polar coordinate for center (convert to radians) A[a,b,r] +=1; //voting end end == Examples == === Find circles in a shoe-print === The original picture (right) is first turned into a binary image (left) using a threshold and Gaussian filter. Then edges (mid) are found from it using canny edge detection. After this, all the edge points are used by the Circle Hough Transform to find underlying circle structure. == Limitations == Since the parameter space of the CHT is three dimensional, it may require lots of storage and computation. Choosing a bigger grid size can ameliorate this problem. However, choosing an appropriate grid size is difficult. Since too coarse a grid can lead to large values of the vote being obtained falsely because many quite different structures correspond to a single bucket. Too fine a grid can lead to structures not being found because votes resulting from tokens that are not exactly aligned end up in different buckets, and no bucket has a large vote. Also, the CHT is not very robust to noise. == Extensions == === Adaptive Hough Transform === J. Illingworth and J. Kittler introduced this method for implementing Hough Transform efficiently. The AHT uses a small accumulator array and the idea of a flexible iterative "coarse to fine" accumulation and search strategy to identify significant peaks in the Hough parameter spaces. This method is substantially superior to the standard Hough Transform implementation in both storage and computational requirements. == Application == === People Counting === Since the head would be similar to a circle in an image, CHT can be used for detecting heads in a picture, so as to count the number of persons in the image. === Brain Aneurysm Detection === Modified Hough Circle Transform (MHCT) is used on the image extracted from Digital Subtraction Angiogram (DSA) to detect and classify aneurysms type. == Implementation code == Circle Detection via Standard Hough Transform, by Amin Sarafraz, Mathworks (File Exchange) Hough Circle Transform, OpenCV-Python Tutorials (archived version on archive.org)
Read more →
Yorba (software)

Yorba is a web-based personal information management platform for finding, monitoring, or deleting online accounts and subscriptions. Yorba is a participating member of Consumer Reports’ Data Rights Protocol (DRP) consortium that develops open technical standards for exercising consumer data rights under laws including the California Consumer Privacy Act. == History == Yorba began as a research project around 2021. It was founded by Chris Zeunstrom (CEO), Nolan Cabeje (CDO) and David Schmudde (CTO). Zeunstrom says he began developing Yorba after growing frustrated with managing numerous email accounts, noting overloaded inboxes create distraction and potential security vulnerabilities. Yorba’s early development was also influenced by security issues he encountered at a previous company, which had been affected by data breaches at a time when such incidents were becoming increasingly common. In 2023, Yorba launched a private beta as a public benefit corporation funded through a give-back model operated by Zeunstrom's New York-based design firm, Ruca. In January 2024, Yorba entered public beta and reported over 1,000 users, including 160 premium subscribers. At the time of the public beta launch, Yorba integrated with Gmail and announced plans to expand compatibility to other online services and cloud storage providers. In September 2024, Yorba completed conformance testing under the Data Rights Protocol, an initiative developed by Consumer Reports, to establish a standard and open-source framework for securely transmitting consumer data rights requests under laws like the California Consumer Privacy Act. Yorba was named among twelve participating companies that implemented the protocol alongside OneTrust and Consumer Reports’ own Permission Slip app. Yorba was one of nine startups selected as 2025 finalist in the Santander X Global Awards international entrepreneurship competition. == Features == Yorba scans user inbox history data to identify online accounts, mailing lists, and possible data breaches. It uses natural language processing and machine learning to identify a user's accounts, services, and subscriptions. The platform prompts password resets for compromised accounts and locates unused accounts. The platform also supports mailing list management by identifying and helping users unsubscribe from newsletters. Paid subscribers can locate and cancel recurring charges. Yorba links with financial institutions in the U.S., Canada, and EU via Plaid Inc. to detect recurring charges and delete unwanted subscriptions. == Privacy and Ethics == Yorba's founder has openly criticized dark patterns that make canceling services difficult, citing personal frustration with inbox clutter as part of his inspiration for Yorba. Yorba offers privacy policy analysis in partnership with Amsterdam-based nonprofit Terms of Service; Didn’t Read, assigning grades based on invasiveness or ethical concerns. As of 2024, the company described its pricing as designed to cover operational costs and sustain the platform without outside investment.
Read more →
How Data Happened

How Data Happened: A History from the Age of Reason to the Age of Algorithms is a 2023 non-fiction book written by Columbia University professors Chris Wiggins and Matthew L. Jones. The book explores the history of data and statistics from the end of the 18th century to the present day. == Content == The book starts at the end of the 18th century, when European states began tabulating physical resources, and ends at the present day, when algorithms manipulate our personal information as a commodity. It looks at the rise of data and statistics, and how early statistical methods were used to justify eugenics, quantify supposed racial differences, and develop military and industrial applications. The authors also discuss the impact of the internet and e-commerce on data collection, the rise of data science, and the consequences of government-run surveillance systems collecting vast amounts of personal data for customized, targeted advertising. They emphasize the importance of privacy and democracy and propose remedies to the problems caused by mass data collection, including stronger regulation of the tech industry and collective action by its employees. The book is a historical analysis that provides context for understanding the debates surrounding data and its control. The book has 336 pages and was published in 2023 by W. W. Norton & Company.
Read more →
Histogram of oriented displacements

Histogram of oriented displacements (HOD) is a 2D trajectory descriptor. The trajectory is described using a histogram of the directions between each two consecutive points. Given a trajectory T = {P1, P2, P3, ..., Pn}, where Pt is the 2D position at time t. For each pair of positions Pt and Pt+1, calculate the direction angle θ(t, t+1). Value of θ is between 0 and 360. A histogram of the quantized values of θ is created. If the histogram is of 8 bins, the first bin represents all θs between 0 and 45. The histogram accumulates the lengths of the consecutive moves. For each θ, a specific histogram bin is determined. The length of the line between Pt and Pt+1 is then added to the specific histogram bin. To show the intuition behind the descriptor, consider the action of waving hands. At the end of the action, the hand falls down. When describing this down movement, the descriptor does not care about the position from which the hand started to fall. This fall will affect the histogram with the appropriate angles and lengths, regardless of the position where the hand started to fall. HOD records for each moving point: how much it moves in each range of directions. HOD has a clear physical interpretation. It proposes that, a simple way to describe the motion of an object, is to indicate how much distance it moves in each direction. If the movement in all directions are saved accurately, the movement can be repeated from the initial position to the final destination regardless of the displacements order. However, the temporal information will be lost, as the order of movements is not stored-this is what we solve by applying the temporal pyramid, as shown in section \ref{sec:temp-pyramid}. If the angles quantization range is small, classifiers that use the descriptor will overfit. Generalization needs some slack in directions-which can be done by increasing the quantization range.
Read more →
XRX (web application architecture)

In software development XRX is a web application architecture based on XForms, REST and XQuery. XRX applications store data on both the web client and on the web server in XML format and do not require a translation between data formats. XRX is considered a simple and elegant application architecture due to the minimal number of translations needed to transport data between client and server systems. The XRX architecture is also tightly coupled to W3C standards (CSS, XHTML 2.0, XPath, XML Schema) to ensure XRX applications will be robust in the future. Because XRX applications leverage modern declarative languages on the client and functional languages on the server they are designed to empower non-developers who are not familiar with traditional imperative languages such as JavaScript, Java or .Net. == Overview of XRX == XRX is a zero translation application architecture that uses XML to store data in the client web browser, on the application server and in the database server. It is because each of these layers uses XML as the same structural data model that XRX applications do not have to translate data structures to and from both object and relational data structures. Because of the lack of need for translation, XRX is considered to have a clean and elegant design. The XRX web application architecture allows developers to focus on the business problem and not the translation problem. XRX benefits from several advances in software technology: === Client Architectural Features === A model–view–controller (MVC) architecture that separates the data from its presentation and business logic. A single element (xf:submission) for all server submissions. This replaces much of the JavaScript code required in most AJAX applications. An advanced event model (XML Events) consistent with W3C standards that frees applications from having to deal with vendor-specific and browser-specific event handling. A Dependency graph that is used to store the dependency structure of the client controllers. This frees the developer from having to manually update either the model or the views when data changes in an application. This allows spreadsheet-like applications to be created on the client with very little effort. A declarative programming style that allows most client XForms applications to be created using a small set of approximately 20 elements. This allows rich client applications to be created without knowledge of JavaScript or other procedural scripting languages. An easy-to-extend system for creating new user interface controls using the EXtensible Bindings Language. This allows developers to add new controls at any time without fear of incompatibilities with W3C standards. === Server Architecture Features === Many native XML databases have built-in REST interfaces making each XQuery inherently a RESTful web service. A functional programming model that promotes side-effect free systems that are easier to debug and easier to run on multiple processors. An easy-to-extend system using XQuery function and modules. === Both Client and Server === Both XRX client and server components support a wide range of XML related standards such as XPath, XML Schema and XML Namespaces. Consistent use of REST interfaces to exchange data between the client and server for all transfers of data including as-you-type data checking and suggest functions. Consistent integration of W3C standards including use of XPath and XML Schema data types. A large library of standard of functions used on both the client and server. == Overall Benefits of XRX == One of the principal benefits of the XRX architecture is that it avoids the requirement to "shred" complex data structures into relational structures and then reconstitute the data back into structures when a record is edited on the client. Another benefits of the XRX Web application architecture is that it avoids most of the problems around the object-relational impedance mismatch. Another advantage is that the client developer does not have to learn JavaScript on the client. == Comparison with Traditional Object/Relational Web Application Architectures == Many traditional web application architectures created in the late 1990 were based on middle object tiers and persistence layers that used tabular data streams and relational database systems. Because each of these layers used different structures to store the models the systems required much additional complexity to translate between layers. == History of XRX == Early examples of using a zero-translation architecture in multi-tier systems can be traced back to the rise of object-oriented databases in the 1990s. See OODBMS History Mark Birbeck suggested that the combination of XForms, XQuery with REST interfaces between the two had many advantages in a meeting to the UK XML User Group in September 2006 . His presentation was one of the first to specifically suggest that the combination of three technologies: XForms and XQuery with REST interfaces would have surprisingly beneficial effects. Mark termed this process "Skimming" but that term did not seem to be contagious. Erik Bruchez of Orbeon spoke at the XML 2007 conference on Boston in December 2007. In his presentation "XForms and the eXist XML database: a perfect couple", Bruchez showed that many people were discovering synergistic benefits of XForms on the client and XQuery on the server. The label for XRX was suggested by a blog posting by Dan McCreary on December 14, 2007. It was in this article that Dan suggested the need for a contagious meme for the ideas behind the XRX architecture. == Generalizations of XRX == Although XRX was originally intended to connote the use of XForms on the client, REST as an interface and XQuery on the server, other proponents of the symmetrical use of XML on the client and server have generalized the term to encompass any XML-centric web client and any server that can store and query XML documents. This use of XRX is generally referred to as "shallow XRX". These generalizations do benefit from a simplified zero-translation architecture but many do not benefit from REST interfaces, XPath for consistent data selection, declarative systems in the client, and functional languages on the server (one of the key aspects of XRX). Use of all three technologies (XForms, REST and XQuery) is referred to as "deep XRX". Although XRX architecture is centred on XForms and XQuery, it does not preclude the use of other technologies that manipulate XML natively, such as XSLT, XProc, and XSL-FO.
Read more →
List of ARM Cortex-M development tools

This is a list of development tools for 32-bit ARM Cortex-M-based microcontrollers, which consists of Cortex-M0, Cortex-M0+, Cortex-M1, Cortex-M3, Cortex-M4, Cortex-M7, Cortex-M23, Cortex-M33, Cortex-M35P, Cortex-M52, Cortex-M55, and Cortex-M85 cores. == Development toolchains == IDE, compiler, linker, debugger, flashing (in alphabetical order): Ac6 System Workbench for STM32 (based on Eclipse and the GNU GCC toolchain with direct support for all ST-provided evaluation boards, Eval, Discovery and Nucleo, debug with ST-LINK) ARM Development Studio 5 by ARM Ltd. Atmel Studio by Atmel (based on Visual Studio and GNU GCC Toolchain) Code Composer Studio by Texas Instruments CoIDE by CooCox (note - website dead since 2018) Crossware Development Suite for ARM by Crossware CrossWorks for ARM by Rowley Dave by Infineon. For XMC processors only. Includes project wizard, detailed register decoding and a code library still under development. DRT by SOMNIUM Technologies. Based on GCC toolchain and proprietary linker technology. Available as a plugin for Atmel Studio and an Eclipse-based IDE. EmBitz (formerly Em::Blocks) – free, fast (non-eclipse) IDE for ST-LINK (live data updates), OpenOCD, including GNU Tools for ARM and project wizards for ST, Atmel, EnergyMicro etc. Embeetle IDE - free, fast (non-eclipse) IDE. Works both on Linux and Windows. emIDE by emide – free Visual Studio Style IDE including GNU Tools for ARM GNU ARM Eclipse – A family of Eclipse CDT extensions and tools for GNU ARM development GNU Tools (aka GCC) for ARM Embedded Processors by ARM Ltd – free GCC for bare metal IAR Embedded Workbench for ARM by IAR Systems ICC by ImageCraft Keil MDK-ARM by Keil LPCXpresso by NXP (formerly Red Suite by Code Red Technologies) MikroC by mikroe – mikroC MULTI by Green Hills Software, for all Arm 7, 9, Cortex-M, Cortex-R, Cortex-A Ride and RKit for ARM by Raisonance SEGGER Embedded Studio for ARM by Segger. SEGGER Ozone by Segger. STM32CubeIDE by STMicroelectronics - Combines STCubeMX with TrueSTUDIO into a single Eclipse style package Sourcery CodeBench by Mentor Graphics TASKING VX-Toolset by Altium TrueSTUDIO by Atollic Visual Studio by Microsoft as IDE, with GNU Tools as compiler/linker – e.g. supported by VisualGDB VXM Design's Buildroot toolchain for Cortex. It integrates GNU toolchain, Nuttx, filesystem and debugger/flasher in one build. winIDEA/winIDEAOpen by iSYSTEM YAGARTO – free GCC (no longer supported) Code::Blocks (EPS edition) (debug with ST-LINK no GDB and no OpenOCD required) IDE for Arduino ARM boards Arduino – IDE for Atmel SAM3X (Arduino Due) Energia – Arduino IDE for Texas Instruments Tiva and CC3200 Notes: == Debugging tools == JTAG and/or SWD debug interface host adapters (in alphabetical order): Black Magic Probe by 1BitSquared. CMSIS-DAP by Mbed. Crossconnect by Rowley Associates. DSTREAM by ARM Holdings Green Hills Probe and SuperTrace Probe by Green Hills Software. iTAG by iSYSTEM. I-jet by IAR Systems. Jaguar by Crossware. J-Link by Segger Supports JTAG and SWD. Supports ARM7, ARM9, ARM11, Cortex-A, Cortex-M, Cortex-R, Renesas RX, Microchip PIC32. Eclipse plug-in available. Supports GDB, RDI, Ozone debuggers. J-Trace by Segger. Supports JTAG, SWD, and ETM trace on Cortex-M. JTAGjet by Signum. LPC-LINK by Embedded Artists (for NXP) This is only embedded on NXP LPCXpresso development boards. LPC-LINK 2 by NXP. This device can be reconfigured to support 3 different protocols: J-LINK by Segger, CMSIS-DAP by ARM, Redlink by Code Red. Multilink debug probes, Cyclone in-system programming/debugging interfaces, and a GDB Server plug-in for Eclipse-based ARM IDEs by PEmicro. OpenOCD open source GDB server supports a variety of JTAG probes OpenOCD Eclipse plug-in available in GNU ARM Eclipse Plug-ins. AK-OPENJTAG by Artekit (Open JTAG-compatible). AK-LINK by Artekit. PEEDI by RONETIX Debug Probe by Raspberry Pi. RLink by Raisonance. ST-LINK/V2 by STMicroelectronics The ST-LINK/V2 debugger embedded on STM32 Nucleo and Discovery development boards can be converted to SEGGER J-LINK protocol. TRACE32 Debugger and ETM/ITM Trace by Lauterbach. ULINK by Keil. Debugging tools and/or debugging plug-ins (in alphabetical order): Memfault Error Analysis for post mortem debugging Percepio Tracealyzer, RTOS trace visualizer (with Eclipse plugin). Segger SystemView, RTOS trace visualizer. == Real-time operating systems == Commonly referred to as RTOS: == C/C++ software libraries == The following are free C/C++ libraries: ARM Cortex libraries: Cortex Microcontroller Software Interface Standard (CMSIS) libopencm3 (formerly called libopenstm32) libmaple for STM32F1 chips LPCOpen for NXP LPC chips Alternate C standard libraries: Bionic libc, dietlibc, EGLIBC, glibc, klibc, musl, Newlib, uClibc FAT file system libraries: EFSL, FatFs, Petit FatFs Fixed-point math libraries: libfixmath, fixedptc, FPMLib Encryption libraries: Comparison of TLS implementations wolfSSL == Non-C/C++ computer languages and software libraries ==
Read more →