AI Content Improver Free Online

AI Content Improver Free Online — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Digital image processing

  Digital image processing is the use of a digital computer to process digital images through an algorithm. As a subcategory or field of digital signal processing, digital image processing has many advantages over analog image processing. It allows a much wider range of algorithms to be applied to the input data and can avoid problems such as the build-up of noise and distortion during processing. Since images are defined over two dimensions (perhaps more), digital image processing may be modeled in the form of multidimensional systems. The generation and development of digital image processing are mainly affected by three factors: first, the development of computers; second, the development of mathematics (especially the creation and improvement of discrete mathematics theory); and third, the demand for a wide range of applications in environment, agriculture, military, industry and medical science has increased. == History == Many of the techniques of digital image processing, or digital picture processing as it often was called, were developed in the 1960s, at Bell Laboratories, the Jet Propulsion Laboratory, Massachusetts Institute of Technology, University of Maryland, and a few other research facilities, with application to satellite imagery, wire-photo standards conversion, medical imaging, videophone, character recognition, and photograph enhancement. The purpose of early image processing was to improve the quality of the image. In image processing, the input is a low-quality image, and the output is an image with improved quality. Common image processing includes image enhancement, restoration, encoding, and compression. The first successful application was the American Jet Propulsion Laboratory (JPL). They used image processing techniques such as geometric correction, gradation transformation, noise removal, etc. on the thousands of lunar photos sent back by the Space Detector Ranger 7 in 1964, taking into account the position of the Sun and the environment of the Moon. The impact of the successful mapping of the Moon's surface map by the computer has been a success. Later, more complex image processing was performed on the nearly 100,000 photos sent back by the spacecraft, so that the topographic map, color map and panoramic mosaic of the Moon were obtained, which achieved extraordinary results and laid a solid foundation for human landing on the Moon. The cost of processing was fairly high, however, with the computing equipment of that era. That changed in the 1970s, when digital image processing proliferated as cheaper computers and dedicated hardware became available. This led to images being processed in real-time, for some dedicated problems such as television standards conversion. As general-purpose computers became faster, they started to take over the role of dedicated hardware for all but the most specialized and computer-intensive operations. With the fast computers and signal processors available in the 2000s, digital image processing has become the most common form of image processing, and is generally used because it is not only the most versatile method, but also the cheapest. === Image sensors === The basis for modern image sensors is metal–oxide–semiconductor (MOS) technology, invented at Bell Labs between 1955 and 1960, This led to the development of digital semiconductor image sensors, including the charge-coupled device (CCD) and later the CMOS sensor. The charge-coupled device was invented by Willard S. Boyle and George E. Smith at Bell Labs in 1969. While researching MOS technology, they realized that an electric charge was the analogy of the magnetic bubble and that it could be stored on a tiny MOS capacitor. As it was fairly straightforward to fabricate a series of MOS capacitors in a row, they connected a suitable voltage to them so that the charge could be stepped along from one to the next. The CCD is a semiconductor circuit that was later used in the first digital video cameras for television broadcasting. The NMOS active-pixel sensor (APS) was invented by Olympus in Japan during the mid-1980s. This was enabled by advances in MOS semiconductor device fabrication, with MOSFET scaling reaching smaller micron and then sub-micron levels. The NMOS APS was fabricated by Tsutomu Nakamura's team at Olympus in 1985. The CMOS active-pixel sensor (CMOS sensor) was later developed by Eric Fossum's team at the NASA Jet Propulsion Laboratory in 1993. By 2007, sales of CMOS sensors had surpassed CCD sensors. MOS image sensors are widely used in optical mouse technology. The first optical mouse, invented by Richard F. Lyon at Xerox in 1980, used a 5 μm NMOS integrated circuit sensor chip. Since the first commercial optical mouse, the IntelliMouse introduced in 1999, most optical mouse devices use CMOS sensors. === Image compression === An important development in digital image compression technology was the discrete cosine transform (DCT), a lossy compression technique first proposed by Nasir Ahmed in 1972. DCT compression became the basis for JPEG, which was introduced by the Joint Photographic Experts Group in 1992. JPEG compresses images down to much smaller file sizes, and has become the most widely used image file format on the Internet. Its highly efficient DCT compression algorithm was largely responsible for the wide proliferation of digital images and digital photos, with several billion JPEG images produced every day as of 2015. Medical imaging techniques produce very large amounts of data, especially from CT, MRI and PET modalities. As a result, storage and communications of electronic image data are prohibitive without the use of compression. JPEG 2000 image compression is used by the DICOM standard for storage and transmission of medical images. The cost and feasibility of accessing large image data sets over low or various bandwidths are further addressed by use of another DICOM standard, called JPIP, to enable efficient streaming of the JPEG 2000 compressed image data. === Digital signal processor (DSP) === Electronic signal processing was revolutionized by the wide adoption of MOS technology in the 1970s. MOS integrated circuit technology was the basis for the first single-chip microprocessors and microcontrollers in the early 1970s, and then the first single-chip digital signal processor (DSP) chips in the late 1970s. DSP chips have since been widely used in digital image processing. The discrete cosine transform (DCT) image compression algorithm has been widely implemented in DSP chips, with many companies developing DSP chips based on DCT technology. DCTs are widely used for encoding, decoding, video coding, audio coding, multiplexing, control signals, signaling, analog-to-digital conversion, formatting luminance and color differences, and color formats such as YUV444 and YUV411. DCTs are also used for encoding operations such as motion estimation, motion compensation, inter-frame prediction, quantization, perceptual weighting, entropy encoding, variable encoding, and motion vectors, and decoding operations such as the inverse operation between different color formats (YIQ, YUV and RGB) for display purposes. DCTs are also commonly used for high-definition television (HDTV) encoder/decoder chips. == Tasks == Digital image processing allows the use of much more complex algorithms, and hence, can offer both more sophisticated performance at simple tasks, and the implementation of methods which would be impossible by analogue means. In particular, digital image processing is a concrete application of, and a practical technology based on: Classification Feature extraction Multi-scale signal analysis Pattern recognition Projection Some techniques that are used in digital image processing include: Anisotropic diffusion Hidden Markov models Image editing Image restoration Independent component analysis Linear filtering Neural networks Partial differential equations Pixelation Point feature matching Principal components analysis Self-organizing maps Wavelets == Digital image transformations == === Filtering === Digital filters are used to blur and sharpen digital images. Filtering can be performed by: convolution with specifically designed kernels (filter array) in the spatial domain masking specific frequency regions in the frequency (Fourier) domain The following examples show both methods: ==== Image padding in Fourier domain filtering ==== Images are typically padded before being transformed to the Fourier space, the highpass filtered images below illustrate the consequences of different padding techniques: Notice that the highpass filter shows extra edges when zero padded compared to the repeated edge padding. ==== Filtering code examples ==== MATLAB example for spatial domain highpass filtering. === Affine transformations === Affine transformations enable basic image transformations including scale, rotate, translate, mirror and shear as is shown in the following examples: To apply the affine

  Read more →
• 

  Artificial intelligence in fraud detection

  Artificial intelligence is used by many different businesses and organizations. It is widely used in the financial sector, especially by accounting firms, to help detect fraud. In 2022, PricewaterhouseCoopers reported that fraud has impacted 46% of all businesses in the world. The shift from working in person to working from home has brought increased access to data. According to an FTC (Federal Trade Commission) study from 2022, customers reported fraud of approximately $5.8 billion in 2021, an increase of 70% from the year before. The majority of these scams were imposter scams and online shopping frauds. Furthermore, artificial intelligence plays a crucial role in developing advanced algorithms and machine learning models that enhance fraud detection systems, enabling businesses to stay ahead of evolving fraudulent tactics in an increasingly digital landscape. == Tools == === Expert systems === Expert systems were first designed in the 1970s as an expansion into artificial intelligence technologies. Their design is based on the premise of decreasing potential user error in decision-making and emulating mental reasoning used by experts in a particular field. They differentiate themselves from traditional linear reasoning models by separating identified points in data and processing them individually at the same time. Though, these systems do not rely purely on machine-learned intelligence. Information regarding rules, practices, and procedures in the form of "if-then" statements are implemented into the programming of the system. Users interact with the system by feeding information into the system either through direct entry or import of external data. An inference system compares the information provided by the user with corresponding rules that are believed to specifically apply to the situation. Using this information and the corresponding rules will be used to create a solution to the user's query. Expert systems will generally not operate properly when the common procedures for a specified situation are ambiguous due to the need for well-defined rules. Implementation of expert systems in accounting procedures is feasible in areas where professional judgment is required. Situations where expert systems are applicable include investigations into transactions that involve potential fraudulent entries, instances of going concern, and the evaluation of risk in the planning stages of an audit. === Continuous auditing === Continuous auditing is a set of processes that assess various aspects of information gathered in an audit to classify areas of risk and potential weaknesses in financial Internal controls at a more frequent rate than traditional methods. Instead of analyzing recorded transactions and journal entries periodically, continuous auditing focuses on interpreting the character of these actions more frequently. The frequency of these processes being undertaken as well as highlighting areas of importance is up to the discretion of their implementer, who commonly makes such decisions based on the level of risk in the accounts being evaluated and the goals of implementing the system. Performance of these processes can occur as frequently as being nearly instantaneous with an entry being posted. The processes involved with analyzing financial data in continuous auditing can include the creation of spreadsheets to allow for interactive information gathering, calculation of financial ratios for comparison with previously created models, and detection of errors in entered figures. A primary goal of this practice is to allow for quicker and easier detection of instances of faulty controls, errors, and instances of fraud. === Machine learning and deep learning === The ability of machine learning and deep learning to swiftly and effectively sort through vast volumes of data in the forms of various documents relevant to companies and documents being audited makes them applicable to the domains of audit and fraud detection. Examples of this include recognizing key language in contracts, identifying levels of risk of fraud in transactions, and assessing journal entries for misstatement. == Applications == === 'Big 4' Accounting Firms === Deloitte created an Al-enabled document-reviewing system in 2014. The system automates the method of reviewing and extracting relevant information from different business documents. Deloitte claims that this innovation has made a difference by reducing time spent going through lawful contract documents, invoices, money-related articulations, and board minutes by up to 50%. Working with IBM's Watson, Deloitte is developing cognitive-technology-enhanced commerce arrangements for its clients. LeasePoint is fueled by IBM TRIRIGA (this product evolved into IBM Maximo Real Estate and Facilities) and uses Deloitte's industrial information to create an end-to-end leasing portfolio. Automated Cognitive Resource Assessment employs IBM's Maximo innovation to progress the proficiency of asset inspection. Ernst and Young (EY) connected Al to the investigation of lease contracts. EY (Australia) has also received Al-enabled auditing technology. Collaborating with H20.ai, PwC developed an Al-enabled framework (GL.ai) capable of analyzing reports and preparing reports. PwC claims to have made a significant investment in normal dialect processing (NLP), an Al-enabled innovation to process unstructured information efficiently. KPMG built a portfolio of Al instruments, called KPMG Ignite, to upgrade trade decisions and forms. Working with Microsoft and IBM Watson, KPMG is creating instruments to coordinate Al, data analytics, Cognitive Technologies, and RPA. == Advantages == === Efficiency === The process of auditing an entity in an attempt to detect fraudulent activity requires the repeating of investigatory processes until an error or misstatement may be identified. Under traditional methods, these processes would be carried out by a human being. Proponents of artificial intelligence in fraud detection have stated that these traditional methods are inefficient and can be more quickly accomplished with the aid of an intelligent computing system. A survey of 400 chief executive officers created by KPMG in 2016 found that approximately 58% believed that artificial intelligence would play a key role in making audits more efficient in the future. === Data interpretation === Higher levels of fraud detection entail the use of professional judgement to interpret data. Supporters of artificial intelligence being used in financial audits have claimed that increased risks from instances of higher data interpretation can be minimized through such technologies. One necessary element of an audit of financial statements that requires professional judgement is the implementation of thresholds for materiality. Materiality entails the distinction between errors and transactions in financial statements that would impact decisions made by users of those financial statements. The threshold for materiality in an audit is set by the auditor based on various factors. Artificial intelligence has been used to interpret data and suggest materiality thresholds to be implemented through the use of expert systems. === Decreased costs === Those in favor of using artificial intelligence to complete investigations of fraud have stated that such technologies decrease the amount of time required to complete tasks that are repetitive. The claim further states that such efficiencies allow for lowered resource requirements, which can then be further spent on tasks that have not been fully automated. The audit firm Ernst & Young has posited these claims by declaring that their deep learning systems have been used to reduce time spent on administrative tasks by analyzing relevant audit documents. According to the firm, this has allowed their employees to focus more on judgement and analysis. == Disadvantages == === Job Displacement === The inescapable reception of computer based intelligence and robotization advancements might prompt critical work relocation across different enterprises. As artificial intelligence frameworks become more equipped for performing undertakings customarily completed by people, there is a worry that specific work jobs could become out of date, prompting joblessness and financial imbalance. === Initial investment requirement === Along with a knowledge of coding and building systems through computer programs, we are seeing the advantages of these systems, but since they are so new, they require a large investment to start building such a system. Any firm that is planning on implementing an AI system to detect fraud must hire a team of data scientists, along with upgrading their cloud system and data storage. The system must be consistently monitored and updated to be the most efficient form of itself, otherwise the likelihood of fraud being involved in those transactions increases. If one does not initially invest in such a syst

  Read more →
• 

  Stochastic parrot

  In machine learning, the term stochastic parrot is a metaphor that frames large language models as systems that statistically mimic text without real understanding. The word "stochastic" – from the ancient Greek "στοχαστικός" (stokhastikos, 'based on guesswork') – is a term from probability theory meaning "randomly determined". The word "parrot" refers to parrots' ability to mimic human speech. The term was introduced in a 2021 paper on AI ethics titled "On the Dangers of Stochastic Parrots: Can Language Models Be Too Big? 🦜" and authored by Timnit Gebru, Emily M. Bender, Angelina McMillan-Major, and Margaret Mitchell. The paper outlined possible risks associated with large language models (LLMs). In December 2020, it was the subject of a workplace dispute between Gebru (then co-leader of Google's Ethical Artificial Intelligence Team) and Google, which had requested the retraction of the paper. The incident culminated in Gebru's controversial departure from the company. The paper was later presented at the 2021 ACM Conference, and the term "stochastic parrot" has seen widespread use in academic research concerning generative AI and LLMs. The term has been interpreted negatively as an insult towards AI. == Background == Timnit Gebru is an AI ethics researcher, Emily M. Bender is a linguist specializing in computational linguistics, and Margaret Mitchell is a computer scientist specializing in algorithmic bias. Gebru had joined Google in 2018, where she co-led a team on the ethics of artificial intelligence with Mitchell. In late 2020, the paper "On the Dangers of Stochastic Parrots: Can Language Models Be Too Big? 🦜" was co-written by Gebru and five other researchers, four of whom were Google employees. The paper argues that large language models (LLMs) present significant risks such as environmental and financial costs, inscrutability leading to unknown dangerous biases, and potential for deception as LLMs do not understand the concepts underlying what they learn. The paper states that LLMs are "stitching together sequences of linguistic forms ... observed in its vast training data, according to probabilistic information about how they combine, but without any reference to meaning." Therefore, they are labeled "stochastic parrots". === Dismissal of Gebru by Google === After the paper was submitted for consideration to the 2021 ACM Conference, Google requested that Gebru either retract the paper from the conference or remove the names of Google employees from it. Gebru refused to do so without further discussion, and emailed Google Research vice president Megan Kacholia that if the company could not explain the request for retraction and address other concerns regarding similar projects, she would plan to resign after a transition period, stating that they could "work on a last date". The following day, on December 2, 2020, Gebru received an email saying that Google was "accepting her resignation". Her abrupt firing sparked protests by Google employees and negative publicity for the company. == Usage == The phrase has been used by AI skeptics to signify that LLMs lack understanding of the meaning of their outputs. Sam Altman, CEO of OpenAI, used the term shortly after the release of ChatGPT in December 2022, tweeting "i am a stochastic parrot, and so r u". The term was nominated as the 2023 AI-related Word of the Year by the American Dialect Society. == Debate == Some LLMs, such as ChatGPT, have become capable of interacting with users in convincingly human-like conversations. The development of these new systems has deepened the discussion of the extent to which LLMs understand or are simply "parroting". According to machine learning researchers Lindholm, Wahlström, Lindsten, and Schön, the term "stochastic parrot" highlights two vital limitations of LLMs: LLMs are limited by the data they are trained on and are simply stochastically repeating contents of datasets. Because they are just making up outputs based on training data, LLMs do not understand if they are saying something incorrect or inappropriate. Lindholm et al. noted that, with poor quality datasets and other limitations, a learning machine might produce results that are "dangerously wrong". === Subjective experience === In the mind of a human being, words and language correspond to things one has experienced. For LLMs, according to proponents of the theory, words correspond only to other words and patterns of usage fed into their training data. Proponents of the idea of stochastic parrots thus conclude that statements about LLMs are due to "the human tendency to attribute meaning to text", and claim this occurs despite the LLMs not actually understanding language. === Fine-tuning === Kelsey Piper argued that the claim that LLMs are stochastic parrots or mere "next-token predictors" focuses on pre-training, ignoring that modern LLMs are also fine-tuned to follow instructions and to prefer accurate answers. === Hallucinations and mistakes === The tendency of LLMs to pass off false information as fact is held as support. Called hallucinations or confabulations, LLMs will occasionally synthesize information that matches some pattern. LLMs may fail to distinguish fact and fiction, which leads to the claim that they can't connect words to a comprehension of the world, as humans do. Furthermore, LLMs may fail to decipher complex or ambiguous grammar cases that rely on understanding the meaning of language. For example: The wet newspaper that fell down off the table is my favorite newspaper. But now that my favorite newspaper fired the editor I might not like reading it anymore. Can I replace 'my favorite newspaper' by 'the wet newspaper that fell down off the table' in the second sentence? GPT-4, an LLM released in March 2023, responded yes, not understanding that the meaning of "newspaper" is different in these two contexts; it is first an object and second an institution. === Benchmarks and experiments === One argument against the hypothesis that LLMs are stochastic parrot is their results on benchmarks for reasoning, common sense and language understanding. In 2023, some LLMs have shown good results on many language understanding tests, such as the Super General Language Understanding Evaluation (SuperGLUE). GPT-4 scored in the >90th-percentile on the Uniform Bar Examination and achieved 93% accuracy on the MATH benchmark of high-school Olympiad problems, results that exceed rote pattern-matching expectations. Such tests, and the smoothness of many LLM responses, help as many as 51% of AI professionals believe they can truly understand language with enough data, according to a 2022 survey. === Expert rebuttals === Some AI researchers dispute the notion that LLMs merely "parrot" their training data. Geoffrey Hinton, a pioneering figure in neural networks, counters that the metaphor misunderstands the prerequisite for accurate language prediction. He argues that "to predict the next word accurately, you have to understand the sentence", a view he presented on 60 Minutes in 2023. From this perspective, understanding is not an alternative to statistical prediction, but rather an emergent property required to perform it effectively at scale. Hinton also uses logical puzzles to demonstrate that LLMs actually understand language. A 2024 Scientific American investigation described a closed Berkeley workshop where state-of-the-art models solved novel tier-4 mathematics problems and produced coherent proofs, indicating reasoning abilities beyond memorization. The GPT-4 Technical Report showed human-level results on professional and academic exams (e.g., the Uniform Bar Exam and USMLE), challenging the "parrot" characterization. Anthropic conducted mechanistic interpretability research on Claude, using attribution graphs to identify circuits. The research showed how the LLM processes information via chains of fuzzy logical inference, and indicated an ability to plan ahead. They found that Claude 3.5 Haiku "employs remarkably general abstractions", forms "internally generated plans for its future outputs" and "works backwards from its longer-term goals". They noted that "The mechanisms of the model can apparently only be faithfully described using an overwhelmingly large causal graph." They also found that the model includes "mechanisms that could underlie a simple form of metacognition", in that it "thinks about" the level of its own knowledge before reaching its answer. === Interpretability === Another line of evidence against the 'stochastic parrot' claim comes from mechanistic interpretability, a research field dedicated to reverse-engineering LLMs to understand their internal workings. Rather than only observing the model's input-output behavior, these techniques probe the model's internal activations, which can be used to determine if they contain structured representations of the world. The goal is to investigate whether LLMs are merely manipulating surface statistics or if t

  Read more →
• 

  Umoove

  Umoove is a high tech startup company that has developed and patented a software-only face and eye tracking technology. The idea was first conceived as an attempt to aid people with disabilities but has since evolved. The only compatibility qualification for tablet computers and smartphones to run Umoove software is a front-facing camera. Umoove headquarters are in Israel on Jerusalem’s Har Hotzvim. Umoove has 15 employees and received two million dollars in financing in 2012. The company's original founders invested around $800,000 to start the business in 2010. In 2013 Umoove was named one of the top three most promising Israeli start ups by Newsgeeks magazine. The company also participated in the 2013 LeWeb conference in Paris, France, where innovative technology startups are showcased. == Technology == The technology uses information extracted from previous frames, such as the angle of the user's head to predict where to look for facial targets in the next frame. This anticipation minimizes the amount of computation needed to scan each image. Umoove accounts for variances in environment, lighting conditions and user hand shake/movement. The technology is designed to provide a consistent experience, whether you're in a brightly lit area or a darkened basement, and to work fluidly between them by adapting its processing when it detects color and brightness shifts. It uses an active stabilization technique to filter out natural body movements from an unstable camera in order to minimize false-positive motion detection. Running the Umoove software on a Samsung Galaxy S3 is said to take up only 2% CPU. Umoove works exclusively with software and there is no hardware add-on necessary. It can be run on any smartphone or tablet computer that has a front-facing camera. Umoove claims that even a low-quality camera on an old device will run their software flawlessly. == Umoove Experience == In January 2014 Umoove released its first game onto the app store. The Umoove Experience game lets users control where they are 'flying' in the game through simple gestures and motions with their head. The avatar will basically go toward wherever the user looks. The game was created to showcase the technology for game developers but that did not stop some from criticizing its simplicity. Umoove also announced that they raised another one million dollars and that they are opening offices in Silicon Valley, California. In February 2014, Umoove announced that their face-tracking software development kit is available for Android developers as well as iOS. == Reviews == The Umoove Experience garnered mostly positive reviews from bloggers and mainstream media with some predicting that it could be the future of mobile gaming. Mashable wrote that Umoove's technology could be the emergence of gesture recognition technology in the mobile space, similar to Kinect with console gaming and what Leap Motion has done with desktop computers. Some, however, remain skeptical. CNET, for example, did not give the game a positive review and called the eye tracking technology 'freaky but cool'. They also noted that pioneering technologies have been known to fall short of expectations, citing Apple Inc’s Siri as an example. The technology blog GigaOM said that the Umoove Experience is ’awesome’ and technology evangelist Robert Scoble has called Umoove "brilliant". == uHealth == In January 2015, Umoove released uHealth, a mobile application that uses eye tracking game-like exercise to challenge the user's ability to be attentive, continuously focus, follow commands and avoid distractions. The app is designed in the form of two games, one to improve attention and another that hones focus. uHealth is a training tool, not a diagnostic. Umoove has stated that they want to use their technology for diagnosing neurological disorders but this will depend on clinical tests and FDA approval. The company cites the direct relationship between eye movements and brain activity as well as various vision-based therapies have been backed by many scientific studies conducted over the past decades. uHealth is the first time this type of therapy is delivered right to the end user through a simple download. == Collaboration rumors == In March 2013 there were rumors on the internet that Umoove would be the functioning software embedded into the Samsung Galaxy S4, which was due to launch that month. This rumor was perpetrated by, among others, New York Times, Techcrunch and Yahoo. Once Samsung launched without the Umoove technology rumors about a potential collaboration with Apple Inc hit the web. It has been said that due to the fact that Apple Inc is losing market share and stock value to Samsung they will be more aggressive and eye tracking is a logical place to make that move.

  Read more →
• 

  Averbis

  Averbis has a focus on healthcare, pharma, automotive and intellectual property analytics. Averbis is involved in various research projects of the German Federal Ministry of Economics and Energy and the European Union such as DebugIT, EUCases, Mantra and SEMCARE. In addition to these projects, Averbis was also involved in the following projects: Greenpilot is a virtual library, which provides technical information in the fields of nutrition, environment and agriculture. Medpilot is a virtual library, which provides information about medicine and related sciences. In 2013, Averbis has been nominated for the German Founder Prize 2013. Averbis GmbH provides text analytics and text mining software to transform unstructured text into actionable information. It was founded in 2007 by IT experts after years of relevant scientific experience in the field of text mining and multilingual information retrieval. Averbis works in the field of terminology management, natural language processing, machine learning and semantic search. Its text mining software is embedded into the text mining framework UIMA.

  Read more →
• 

  Superquadrics

  In mathematics, the superquadrics or super-quadrics (also superquadratics) are a family of geometric shapes defined by formulas that resemble those of ellipsoids and other quadrics, except that the squaring operations are replaced by arbitrary powers. They can be seen as the three-dimensional relatives of the superellipses. The term may refer to the solid object or to its surface, depending on the context. The equations below specify the surface; the solid is specified by replacing the equality signs by less-than-or-equal signs. The superquadrics include many shapes that resemble cubes, octahedra, cylinders, lozenges and spindles, with rounded or sharp corners. Because of their flexibility and relative simplicity, they are popular geometric modeling tools, especially in computer graphics. It becomes an important geometric primitive widely used in computer vision, robotics, and physical simulation. Some authors, such as Alan Barr, define "superquadrics" as including both the superellipsoids and the supertoroids. In modern computer vision literatures, superquadrics and superellipsoids are used interchangeably, since superellipsoids are the most representative and widely utilized shape among all the superquadrics. Comprehensive coverage of geometrical properties of superquadrics and methods of their recovery from range images and point clouds are covered in several computer vision literatures. == Formulas == === Implicit equation === The surface of the basic superquadric is given by | x | r + | y | s + | z | t = 1 {\displaystyle \left|x\right|^{r}+\left|y\right|^{s}+\left|z\right|^{t}=1} where r, s, and t are positive real numbers that determine the main features of the superquadric. Namely: less than 1: a pointy octahedron modified to have concave faces and sharp edges. exactly 1: a regular octahedron. between 1 and 2: an octahedron modified to have convex faces, blunt edges and blunt corners. exactly 2: a sphere greater than 2: a cube modified to have rounded edges and corners. infinite (in the limit): a cube Each exponent can be varied independently to obtain combined shapes. For example, if r=s=2, and t=4, one obtains a solid of revolution which resembles an ellipsoid with round cross-section but flattened ends. This formula is a special case of the superellipsoid's formula if (and only if) r = s. If any exponent is allowed to be negative, the shape extends to infinity. Such shapes are sometimes called super-hyperboloids. The basic shape above spans from -1 to +1 along each coordinate axis. The general superquadric is the result of scaling this basic shape by different amounts A, B, C along each axis. Its general equation is | x A | r + | y B | s + | z C | t = 1. {\displaystyle \left|{\frac {x}{A}}\right|^{r}+\left|{\frac {y}{B}}\right|^{s}+\left|{\frac {z}{C}}\right|^{t}=1.} === Parametric description === Parametric equations in terms of surface parameters u and v (equivalent to longitude and latitude if m equals 2) are x ( u , v ) = A g ( v , 2 r ) g ( u , 2 r ) y ( u , v ) = B g ( v , 2 s ) f ( u , 2 s ) z ( u , v ) = C f ( v , 2 t ) − π 2 ≤ v ≤ π 2 , − π ≤ u < π , {\displaystyle {\begin{aligned}x(u,v)&{}=Ag\left(v,{\frac {2}{r}}\right)g\left(u,{\frac {2}{r}}\right)\\y(u,v)&{}=Bg\left(v,{\frac {2}{s}}\right)f\left(u,{\frac {2}{s}}\right)\\z(u,v)&{}=Cf\left(v,{\frac {2}{t}}\right)\\&-{\frac {\pi }{2}}\leq v\leq {\frac {\pi }{2}},\quad -\pi \leq u<\pi ,\end{aligned}}} where the auxiliary functions are f ( ω , m ) = sgn ⁡ ( sin ⁡ ω ) | sin ⁡ ω | m g ( ω , m ) = sgn ⁡ ( cos ⁡ ω ) | cos ⁡ ω | m {\displaystyle {\begin{aligned}f(\omega ,m)&{}=\operatorname {sgn}(\sin \omega )\left|\sin \omega \right|^{m}\\g(\omega ,m)&{}=\operatorname {sgn}(\cos \omega )\left|\cos \omega \right|^{m}\end{aligned}}} and the sign function sgn(x) is sgn ⁡ ( x ) = { − 1 , x < 0 0 , x = 0 + 1 , x > 0. {\displaystyle \operatorname {sgn}(x)={\begin{cases}-1,&x<0\\0,&x=0\\+1,&x>0.\end{cases}}} === Spherical product === Barr introduces the spherical product which given two plane curves produces a 3D surface. If f ( μ ) = ( f 1 ( μ ) f 2 ( μ ) ) , g ( ν ) = ( g 1 ( ν ) g 2 ( ν ) ) {\displaystyle f(\mu )={\begin{pmatrix}f_{1}(\mu )\\f_{2}(\mu )\end{pmatrix}},\quad g(\nu )={\begin{pmatrix}g_{1}(\nu )\\g_{2}(\nu )\end{pmatrix}}} are two plane curves then the spherical product is h ( μ , ν ) = f ( μ ) ⊗ g ( ν ) = ( f 1 ( μ ) g 1 ( ν ) f 1 ( μ ) g 2 ( ν ) f 2 ( μ ) ) {\displaystyle h(\mu ,\nu )=f(\mu )\otimes g(\nu )={\begin{pmatrix}f_{1}(\mu )\ g_{1}(\nu )\\f_{1}(\mu )\ g_{2}(\nu )\\f_{2}(\mu )\end{pmatrix}}} This is similar to the typical parametric equation of a sphere: x = x 0 + r sin ⁡ θ cos ⁡ φ y = y 0 + r sin ⁡ θ sin ⁡ φ ( 0 ≤ θ ≤ π , 0 ≤ φ < 2 π ) z = z 0 + r cos ⁡ θ {\displaystyle {\begin{aligned}x&=x_{0}+r\sin \theta \;\cos \varphi \\y&=y_{0}+r\sin \theta \;\sin \varphi \qquad (0\leq \theta \leq \pi ,\;0\leq \varphi <2\pi )\\z&=z_{0}+r\cos \theta \end{aligned}}} which give rise to the name spherical product. Barr uses the spherical product to define quadric surfaces, like ellipsoids, and hyperboloids as well as the torus, superellipsoid, superquadric hyperboloids of one and two sheets, and supertoroids. == Plotting code == The following GNU Octave code generates a mesh approximation of a superquadric:

  Read more →
• 

  Night Sky (app)

  Night Sky (app) is an application developed and published by indie studio iCandi Apps Ltd. from the UK. Night Sky is a stargazing reference app, where the user can explore a virtual representation of the night sky to identify stars, planets, constellations and satellites. The app is developed specifically for iOS, tvOS and watchOS devices. Night Sky was first released on November 1, 2011 for iOS, and has had multiple updates since launch. Night Sky was mentioned in the September 2016 Apple Keynote during the Apple Watch Series 2 announcement. In October 2016, Night Sky was featured as the Free App of The Week on the Apple App Store. == Reception == Night Sky was featured in Apple's 'Best of 2012' and has also been pre-installed onto iPads in Apple retail stores worldwide.

  Read more →
• 

  Automatic taxonomy construction

  Automatic taxonomy construction (ATC) is the use of software programs to generate taxonomical classifications from a body of texts called a corpus. ATC is a branch of natural language processing, which in turn is a branch of artificial intelligence. A taxonomy (or taxonomical classification) is a scheme of classification, especially, a hierarchical classification, in which things are organized into groups or types. Among other things, a taxonomy can be used to organize and index knowledge (stored as documents, articles, videos, etc.), such as in the form of a library classification system, or a search engine taxonomy, so that users can more easily find the information they are searching for. Many taxonomies are hierarchies (and thus, have an intrinsic tree structure), but not all are. Manually developing and maintaining a taxonomy is a labor-intensive task requiring significant time and resources, including familiarity of or expertise in the taxonomy's domain (scope, subject, or field), which drives the costs and limits the scope of such projects. Also, domain modelers have their own points of view which inevitably, even if unintentionally, work their way into the taxonomy. ATC uses artificial intelligence techniques to quickly automatically generate a taxonomy for a domain in order to avoid these problems and remove limitations. == Approaches == There are several approaches to ATC. One approach is to use rules to detect patterns in the corpus and use those patterns to infer relations such as hyponymy. Other approaches use machine learning techniques such as Bayesian inferencing and Artificial Neural Networks. === Keyword extraction === One approach to building a taxonomy is to automatically gather the keywords from a domain using keyword extraction, then analyze the relationships between them (see Hyponymy, below), and then arrange them as a taxonomy based on those relationships. === Hyponymy and "is-a" relations === In ATC programs, one of the most important tasks is the discovery of hypernym and hyponym relations among words. One way to do that from a body of text is to search for certain phrases like "is a" and "such as". In linguistics, is-a relations are called hyponymy. Words that describe categories are called hypernyms and words that are examples of categories are hyponyms. For example, dog is a hypernym and Fido is one of its hyponyms. A word can be both a hyponym and a hypernym. So, dog is a hyponym of mammal and also a hypernym of Fido. Taxonomies are often represented as is-a hierarchies where each level is more specific than (in mathematical language "a subset of") the level above it. For example, a basic biology taxonomy would have concepts such as mammal, which is a subset of animal, and dogs and cats, which are subsets of mammal. This kind of taxonomy is called an is-a model because the specific objects are considered instances of a concept. For example, Fido is-a instance of the concept dog and Fluffy is-a cat. == Applications == ATC can be used to build taxonomies for search engines, to improve search results. ATC systems are a key component of ontology learning (also known as automatic ontology construction), and have been used to automatically generate large ontologies for domains such as insurance and finance. They have also been used to enhance existing large networks such as Wordnet to make them more complete and consistent. == ATC software == == Other names == Other names for automatic taxonomy construction include: Automated outline building Automated outline construction Automated outline creation Automated outline extraction Automated outline generation Automated outline induction Automated outline learning Automated outlining Automated taxonomy building Automated taxonomy construction Automated taxonomy creation Automated taxonomy extraction Automated taxonomy generation Automated taxonomy induction Automated taxonomy learning Automatic outline building Automatic outline construction Automatic outline creation Automatic outline extraction Automatic outline generation Automatic outline induction Automatic outline learning Automatic taxonomy building Automatic taxonomy creation Automatic taxonomy extraction Automatic taxonomy generation Automatic taxonomy induction Automatic taxonomy learning Outline automation Outline building Outline construction Outline creation Outline extraction Outline generation Outline induction Outline learning Semantic taxonomy building Semantic taxonomy construction Semantic taxonomy creation Semantic taxonomy extraction Semantic taxonomy generation Semantic taxonomy induction Semantic taxonomy learning Taxonomy automation Taxonomy building Taxonomy construction Taxonomy creation Taxonomy extraction Taxonomy generation Taxonomy induction Taxonomy learning

  Read more →
• 

  Connectionist expert system

  Connectionist expert systems are artificial neural network (ANN) based expert systems where the ANN generates inferencing rules e.g., fuzzy-multi layer perceptron where linguistic and natural form of inputs are used. Apart from that, rough set theory may be used for encoding knowledge in the weights better and also genetic algorithms may be used to optimize the search solutions better. Symbolic reasoning methods may also be incorporated (see hybrid intelligent system). (Also see expert system, neural network, clinical decision support system.)

  Read more →
• 

  Textual case-based reasoning

  Textual case-based reasoning (TCBR) is a subtopic of case-based reasoning, in short CBR, a popular area in artificial intelligence. CBR suggests the ways to use past experiences to solve future similar problems, requiring that past experiences be structured in a form similar to attribute-value pairs. This leads to the investigation of textual descriptions for knowledge exploration whose output will be, in turn, used to solve similar problems. == Subareas == Textual case-base reasoning research has focused on: measuring similarity between textual cases mapping texts into structured case representations adapting textual cases for reuse automatically generating representations.

  Read more →
• 

  Transduction (machine learning)

  In logic, statistical inference, and supervised learning, transduction or transductive inference is reasoning from observed, specific (training) cases to specific (test) cases. In contrast, induction is reasoning from observed training cases to general rules, which are then applied to the test cases. The distinction is most interesting in cases where the predictions of the transductive model are not achievable by any inductive model. Note that this is caused by transductive inference on different test sets producing mutually inconsistent predictions. Transduction was introduced in a computer science context by Vladimir Vapnik in the 1990s, motivated by his view that transduction is preferable to induction since, according to him, induction requires solving a more general problem (inferring a function) before solving a more specific problem (computing outputs for new cases): "When solving a problem of interest, do not solve a more general problem as an intermediate step. Try to get the answer that you really need but not a more general one.". An example of learning which is not inductive would be in the case of binary classification, where the inputs tend to cluster in two groups. A large set of test inputs may help in finding the clusters, thus providing useful information about the classification labels. The same predictions would not be obtainable from a model which induces a function based only on the training cases. Some people may call this an example of the closely related semi-supervised learning, since Vapnik's motivation is quite different. The most well-known example of a case-bases learning algorithm is the k-nearest neighbor algorithm, which is related to transductive learning algorithms. Another example of an algorithm in this category is the Transductive Support Vector Machine (TSVM). A third possible motivation of transduction arises through the need to approximate. If exact inference is computationally prohibitive, one may at least try to make sure that the approximations are good at the test inputs. In this case, the test inputs could come from an arbitrary distribution (not necessarily related to the distribution of the training inputs), which wouldn't be allowed in semi-supervised learning. An example of an algorithm falling in this category is the Bayesian Committee Machine (BCM). == Historical context == The mode of inference from particulars to particulars, which Vapnik came to call transduction, was already distinguished from the mode of inference from particulars to generalizations in part III of the Cambridge philosopher and logician W.E. Johnson's 1924 textbook, Logic. In Johnson's work, the former mode was called 'eduction' and the latter was called 'induction'. Bruno de Finetti developed a purely subjective form of Bayesianism in which claims about objective chances could be translated into empirically respectable claims about subjective credences with respect to observables through exchangeability properties. An early statement of this view can be found in his 1937 La Prévision: ses Lois Logiques, ses Sources Subjectives and a mature statement in his 1970 Theory of Probability. Within de Finetti's subjective Bayesian framework, all inductive inference is ultimately inference from particulars to particulars. == Example problem == The following example problem contrasts some of the unique properties of transduction against induction. A collection of points is given, such that some of the points are labeled (A, B, or C), but most of the points are unlabeled (?). The goal is to predict appropriate labels for all of the unlabeled points. The inductive approach to solving this problem is to use the labeled points to train a supervised learning algorithm, and then have it predict labels for all of the unlabeled points. With this problem, however, the supervised learning algorithm will only have five labeled points to use as a basis for building a predictive model. It will certainly struggle to build a model that captures the structure of this data. For example, if a nearest-neighbor algorithm is used, then the points near the middle will be labeled "A" or "C", even though it is apparent that they belong to the same cluster as the point labeled "B", compared to semi-supervised learning. Transduction has the advantage of being able to consider all of the points, not just the labeled points, while performing the labeling task. In this case, transductive algorithms would label the unlabeled points according to the clusters to which they naturally belong. The points in the middle, therefore, would most likely be labeled "B", because they are packed very close to that cluster. An advantage of transduction is that it may be able to make better predictions with fewer labeled points, because it uses the natural breaks found in the unlabeled points. One disadvantage of transduction is that it builds no predictive model. If a previously unknown point is added to the set, the entire transductive algorithm would need to be repeated with all of the points in order to predict a label. This can be computationally expensive if the data is made available incrementally in a stream. Further, this might cause the predictions of some of the old points to change (which may be good or bad, depending on the application). A supervised learning algorithm, on the other hand, can label new points instantly, with very little computational cost. == Transduction algorithms == Transduction algorithms can be broadly divided into two categories: those that seek to assign discrete labels to unlabeled points, and those that seek to regress continuous labels for unlabeled points. Algorithms that seek to predict discrete labels tend to be derived by adding partial supervision to a clustering algorithm. Two classes of algorithms can be used: flat clustering and hierarchical clustering. The latter can be further subdivided into two categories: those that cluster by partitioning, and those that cluster by agglomerating. Algorithms that seek to predict continuous labels tend to be derived by adding partial supervision to a manifold learning algorithm. === Partitioning transduction === Partitioning transduction can be thought of as top-down transduction. It is a semi-supervised extension of partition-based clustering. It is typically performed as follows: Consider the set of all points to be one large partition. While any partition P contains two points with conflicting labels: Partition P into smaller partitions. For each partition P: Assign the same label to all of the points in P. Of course, any reasonable partitioning technique could be used with this algorithm. Max flow min cut partitioning schemes are very popular for this purpose. === Agglomerative transduction === Agglomerative transduction can be thought of as bottom-up transduction. It is a semi-supervised extension of agglomerative clustering. It is typically performed as follows: Compute the pair-wise distances, D, between all the points. Sort D in ascending order. Consider each point to be a cluster of size 1. For each pair of points {a,b} in D: If (a is unlabeled) or (b is unlabeled) or (a and b have the same label) Merge the two clusters that contain a and b. Label all points in the merged cluster with the same label. === Continuous Label Transduction === These methods seek to regress continuous labels, often via manifold learning techniques. The idea is to learn a low-dimensional representation of the data and infer values smoothly across the manifold. == Applications and related concepts == Transduction is closely related to: Semi-supervised learning – uses both labeled and unlabeled data but typically induces a model. Case-based reasoning – such as the k-nearest neighbor (k-NN) algorithm, often considered a transductive method. Transductive Support Vector Machines (TSVM) – extend standard SVMs to incorporate unlabeled test data during training. Bayesian Committee Machine (BCM) – an approximation method that makes transductive predictions when exact inference is too costly.

  Read more →
• 

  FloodAlerts

  FloodAlerts is a software application, developed by software specialists Shoothill, which takes real-time flooding information, and displays the data on an interactive Bing map, updating and warning its users when they, their premises or the routes they need to travel could be at risk of flooding. == History == FloodAlerts was launched in 2012, originally as the world's first Facebook flood warning app. == Operation == FloodAlerts is made available free of charge to individuals. Users are able to set up their own monitored locations and receive alerts via the application or their Facebook wall if the locations they are monitoring are at imminent risk of flooding. Hosted in the Cloud, using the Microsoft Windows Azure platform, the FloodAlerts application processes the data received from the Environment Agency, automatically creates the required map tiles, pins and alerts and displays them on an interactive Bing map, updating the content every 15 minutes. Users are able to see the latest information on the map without having to refresh their browser. FloodAlerts can also be provided as a customised risk management solution to businesses that require infrastructure or asset safety monitoring in areas where water levels are rising or receding. == Awards and recognition == FloodAlerts has received The Guardian and Virgin Media Business's 2012 Innovation Nation Awards and was shortlisted as a finalist for a further two national awards: the UK IT Industry Awards for Innovation and Entrepreneurship and The Institution of Engineering and Technology Innovation Awards for Information Technology. == In the press == The FloodAlerts application was reviewed on the BBC website. It was also reviewed on BBC Click.

  Read more →
• 

  Cloud Native Computing Foundation

  The Cloud Native Computing Foundation (CNCF) is a subsidiary of the Linux Foundation founded in 2015 to support cloud-native computing. == History == It was announced alongside Kubernetes 1.0, an open source container cluster manager, which was contributed to the Linux Foundation by Google as a seed technology. Founding members include Google, CoreOS, Mesosphere, Red Hat, Twitter, Huawei, Intel, RX-M, Cisco, IBM, Docker, Univa, and VMware. Today, CNCF is supported by over 450 members. In August 2018 Google announced that it was handing over operational control of Kubernetes to the community. == Projects == Argo is a collection of tools for getting work done with Kubernetes. Among its main features are Workflows and Events. It was accepted to CNCF on March 26, 2020 at the Incubating maturity level and then moved to the Graduated maturity level on December 6, 2022. cert-manager provisions and manages TLS certificates in Kubernetes. It was accepted to CNCF on November 10, 2020, moved to the Incubating maturity level on September 19, 2022, and then moved to the Graduated maturity level on September 29, 2024. Cilium provides networking, security, and observability for Kubernetes deployments using eBPF technology. It joined the CNCF at incubation level in October 2021 and the CNCF announced its graduation in October 2023. containerd is an industry-standard core container runtime. It is currently available as a daemon for Linux and Windows, which can manage the complete container lifecycle of its host system. In 2015, Docker donated the OCI Specification to The Linux Foundation with a reference implementation called runc. Since February 28, 2019 it is an official CNCF project. Its general availability and intention to donate the project to CNCF was announced by Docker in 2017. CoreDNS is a DNS server that chains plugins. Its graduation was announced in 2019. Dapr, the distributed application runtime, provides APIs for building secure and reliable microservices and agentic AI systems. Dapr was donated to the CNCF in November 2021 and joined at incubation level. The CNCF announced its graduation in November 2024. Envoy: Originally built at Lyft to move their architecture away from a monolith, Envoy is a high-performance open source edge and service proxy that makes the network transparent to applications. Lyft contributed Envoy to Cloud Native Computing Foundation in September 2017. etcd is a distributed key value store, providing a method of storing data across a cluster of machines. It became a CNCF incubating project in 2018 at KubeCon+CloudNativeCon North America in Seattle that year. Falco is an open source and cloud native runtime security initiative. It is the "de facto Kubernetes threat detection engine". It became an incubating project in January 2020 and graduated in February 2024. Flux is an open source project for powering GitOps in Kubernetes clusters. It provides the GitOps Toolkit, a set of Kubernetes APIs that allow you to define how configuration source code is securely pulled into your cluster and deployed by popular Kubernetes manifests rendering engines like Kustomize and Helm. The most recommended source mechanism is the OCIRepository API, which provides enhanced security and benefits from container image tooling out there. Flux has also notification integrations with popular services like Prometheus Alertmanager, PagerDuty, Slack and so on. Flux has graduated in CNCF in 2022. Harbor is an "open source trusted cloud native registry project that stores, signs, and scans content." It became an incubating project in September 2019 and graduated in June 2020. Helm is a package manager that helps developers "easily manage and deploy applications onto the Kubernetes cluster." It joined the incubating level in June 2018 and graduated in April 2020. Istio is a service mesh technology. It was accepted by CNCF in September 2022 and graduated on July 12, 2023. Jaeger, Created by Uber Engineering, Jaeger is an open source distributed tracing system inspired by Google Dapper paper and OpenZipkin community. It can be used for tracing microservice-based architectures, including distributed context propagation, distributed transaction monitoring, root cause analysis, service dependency analysis, and performance/latency optimization. The Cloud Native Computing Foundation Technical Oversight Committee voted to accept Jaeger as the 12th hosted project in September 2017 and became a graduated project in 2019. In 2020 it became an approved and fully integrated part of the CNCF ecosystem. Kubernetes is an open source framework for automating deployment and managing applications in a containerized and clustered environment. "It aims to provide better ways of managing related, distributed components across the varied infrastructure." It was originally designed by Google and donated to The Linux Foundation to form the Cloud Native Computing Foundation with Kubernetes as the seed technology. The "large and diverse" community supporting the project has made its staying power more robust than other, older technologies of the same ilk. In January 2020, the CNCF annual report showed significant growth in interest, training, event attendance and investment related to Kubernetes. Linkerd is CNCF's fifth member project, and the project that coined the term "service mesh". Linkerd adds observability, security, and reliability features to applications by adding them to the platform rather than the application layer, and features a "micro-proxy" to maximize speed and security of its data plane. Linkerd graduated from CNCF in July 2021. Open Policy Agent (OPA) is "an open source general-purpose policy engine and language for cloud infrastructure." It became a CNCF incubating project in April 2019. OPA graduated from CNCF in February 2021. Prometheus is a cloud monitoring tool sponsored by SoundCloud in early iterations. In August 2018, the tool was designated a graduated project by the Cloud Native Computing Foundation. It is now a Cloud Native Computing Foundation member project. Rook is CNCF's first cloud native storage project. It became an incubation level project in 2018 and graduated in October 2020. SPIFFE is an open standard and framework for workload identity, much the same way that OAuth is an open standard and framework for human identity. It is built from the ground up to accommodate modern computing environments, which operate with systems scale and velocity (as opposed to human scale and velocity), while still maintaining interoperability with existing technologies like OAuth and X.509 Public key infrastructure. Unlike other identity standards, SPIFFE supports multiple credential types for a single identity, ensuring that the highly varied needs of production environments are consistently met without compromise. SPIFFE joined the CNCF as a sandbox project in 2018, was accepted to incubation in 2020, and graduated in 2022. SPIRE is an open source identity provider for workloads based on the SPIFFE framework. It is highly pluggable, and fills the attestation and issuance needs required by any workload identity solution. The plugin interfaces it exposes allows users to write integrations with in-house systems, build internal self-service portals, and more. It is a very powerful building block for issuing short-lived identity credentials to dynamic cloud workloads. SPIRE became a CNCF Graduated project in 2022. The Update Framework (TUF) helps developers to secure new or existing software update systems, which are often found to be vulnerable to many known attacks. TUF addresses this widespread problem by providing a comprehensive, flexible security framework that developers can integrate with any software update system. TUF was CNCF's first security-focused project and the ninth project overall to graduate from the foundation's hosting program. TiKV provides a distributed key–value database. Vitess is a database clustering system for horizontal scaling of MySQL, first created for internal use by YouTube. It became a CNCF project in 2018 and graduated in November 2019. Contour is a management server for Envoy that can direct the management of Kubernetes' traffic. Contour also provides routing features that are more advanced than Kubernetes' out-of-the-box Ingress specification. VMWare contributed the project to CNCF in July 2020. Cortex offers horizontally scalable, multi-tenant, long-term storage for Prometheus and works alongside Amazon DynamoDB, Google Bigtable, Cassandra, S3, GCS, and Microsoft Azure. It was introduced into the ecosystem incubator alongside Thanos in August 2020. CRI-O is an Open Container Initiative (OCI) based "implementation of Kubernetes Container Runtime Interface". CRI-O allows Kubernetes to be container runtime-agnostic. It became an incubating project in 2019. gRPC is a "modern open source high performance RPC framework that can run in any environment." The project was formed in 2015 when Google decided to open sou

  Read more →
• 

  INDECT

  INDECT is a research project in the area of intelligent security systems performed by several European universities since 2009 and funded by the European Union. The purpose of the project is to involve European scientists and researchers in the development of solutions to and tools for automatic threat detection through e.g. processing of CCTV camera data streams, standardization of video sequence quality for user applications, threat detection in computer networks as well as data and privacy protection. The area of research, applied methods, and techniques are described in the public deliverables which are available to the public on the project's website. Practically, all information related to the research is public. Only documents that comprise information related to financial data or information that could negatively influence the competitiveness and law enforcement capabilities of parties involved in the project are not published. This follows regulations and practices applied in EU research projects. == Application and target users == The main end-user of INDECT solutions are police forces and security services. The principle of operation of the project is detecting threats and identifying sources of threats, without monitoring and searching for particular citizens or groups of citizens. Then, the system operator (i.e. police officer) decides whether an intervention of services responsible for public security are required or not. Further investigation eventually leading to persons related to threats is performed, preserving the presumption of innocence, based on existing procedures already used by police services and prosecutors. As it can be found in the project deliverables, INDECT does not involve storage of personal data (such as names, addresses, identity document numbers, etc.). A similar, behavior-based surveillance program was SAMURAI (Suspicious and Abnormal behavior Monitoring Using a netwoRk of cAmeras & sensors for sItuation awareness enhancement). == Expected results == The main expected results of the INDECT project are: Trial of intelligent analysis of video and audio data for threat detection in urban environments Creation of tools and technology for privacy and data protection during storage and transmission of information using quantum cryptography and new methods of digital watermarking Performing computer-aided detection of threats and targeted crimes in Internet resources with privacy-protecting solutions Construction of a search engine for rapid semantic search based on watermarking of content related to child pornography and human organ trafficking Implementation of a distributed computer system that is capable of effective intelligent processing == Controversy == Some media and other sources accuse INDECT of privacy abuse, collecting personal data, and keeping information from the public. Consequently, these issues have been commented and discussed by some Members of the European Parliament. As seen in the project's documentation, INDECT does not involve mobile phone tracking or call interception. The rumors about testing INDECT during 2012 UEFA European Football Championship also turned out to be false. The mid-term review of the Seventh Framework Programme to the European Parliament strongly urges the European Commission to immediately make all documents available and to define a clear and strict mandate for the research goal, the application, and the end users of INDECT, and stresses a thorough investigation of the possible impact on fundamental rights. Nevertheless, according to Mr. Paweł Kowal, MEP, the project had the ethical review on 15 March 2011 in Brussels with the participation of ethics experts from Austria, France, Netherlands, Germany and Great Britain.

  Read more →
• 

  Lose It!

  Lose It! is an American health and wellness mobile app developed by FitNow, Inc. The app generates calorie budgets for users by tracking weight, exercise, food and calorie intake, and personal goals, primarily to assist them in achieving weight loss. == History == Lose It! was developed in Boston and debuted in 2008. The app and its associated company were founded by J.J. Allaire, Charles Teague and Paul Dicristina. Prior to founding Lose It!, Teague and Allaire had founded the online research tool Onfolio, which was acquired by Microsoft in 2006. The Lose It! app was originally released as an iOS app before being released as a website in 2010 and an Android app in 2011. In 2015, Lose It! announced plans to release the app internationally. Lose It! was also available as an app for Apple Watch at its launch in 2015. The app’s “Snap It” feature, which allows users to approximate calorie counts by taking pictures of their daily meals and snacks, was released in beta in 2016. Snap It was named an Innovation Awards Honoree at the 2017 Consumer Electronics Show in Las Vegas. In 2020, Patrick Wetherille, one of the company’s earliest employees, was appointed chief executive officer. == App == Lose It! is weight loss app. The app allows users to set goals such as increasing strength, overall health/maintenance, and weight loss. It provides users recommended calorie budgets based on data such as their current weight and their desired weight. Lose It! also tracks data such as exercise/activity level and food consumption and allows users to track calories consumed by scanning barcodes for food products then retrieving calorie information for products. The app can also estimate the amount of calories in a food products. Lose It! has integration features connecting it to other apps such as Fitbit and Runkeeper. It also has social features such as joining groups and sharing progress with friends. The Premium version of the app allows users to track foods according to specific diets like keto, heart healthy or Mediterranean.

  Read more →