AI Content Generation Tools

AI Content Generation Tools — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Artificial intelligence of things

Artificial Intelligence of Things (AIoT) is the combination of artificial intelligence (AI) technologies with the Internet of things (IoT) infrastructure to create systems capable of sensing, learning, and acting on data without continuous human intervention. While IoT focuses on connectivity and sensor data collection, AI enables IoT devices to analyse data in real time and produce actionable outputs, including automated decisions at the edge. == Applications == === Manufacturing and predictive maintenance === Manufacturing accounts for the largest share of AIoT adoption by industry vertical. A common application is predictive maintenance, where sensors measuring vibration, temperature, current draw, and acoustic emissions feed machine learning models trained to detect signatures that precede equipment failure. These systems can flag developing faults weeks or months in advance, and in more advanced deployments can autonomously adjust machine parameters such as motor speed or cooling cycles to delay or prevent failure. === Other industries === In healthcare, AIoT enables remote patient monitoring through wearable devices that collect vital signs and apply AI models to detect anomalies or predict deterioration. In logistics, GPS and telematics sensors combined with AI models support real-time route optimisation, vehicle maintenance prediction, and fuel cost forecasting. Smart building systems use occupancy, temperature, and energy sensors with AI to dynamically adjust HVAC and lighting, reducing energy consumption. == Architecture == AIoT systems typically operate across three layers: a device layer of sensors and actuators that collect data, a connectivity layer that transmits data via protocols such as MQTT or HTTP, and a compute layer where AI models process the data either in the cloud or at the edge. The trend toward edge-based processing, where inference runs on low-cost processors near the data source rather than in a centralised cloud, has accelerated as hardware costs have fallen and applications increasingly require sub-second response times. == Market == Market sizing estimates for AIoT vary significantly depending on scope and definition. Fortune Business Insights valued the AIoT market at USD 35.65 billion in 2023, projecting growth to USD 253.86 billion by 2030 at a compound annual growth rate of 32.4%. Grand View Research estimated the broader market at USD 171.4 billion in 2024 with a CAGR of 31.7% through 2030, reflecting a wider definition that includes AI-integrated hardware components. North America accounted for approximately 40% of global market share in 2024, with the Asia-Pacific region projected as the fastest-growing market.
Read more →
End-to-end encryption

End-to-end encryption (E2EE) is a method of implementing a secure communication system where only the sender and intended recipient can read the messages. No one else, including the system provider, telecom providers, Internet providers or malicious actors, can access the cryptographic keys needed to read or send messages. End-to-end encryption prevents data from being read or secretly modified, except by the sender and intended recipients. In many applications, messages are relayed from a sender to some recipients by a service provider. In an E2EE-enabled service, messages are encrypted on the sender's device such that no third party, including the service provider, has the means to decrypt them. The recipients retrieve encrypted messages and decrypt them independently on their own devices. Since third parties cannot decrypt the data being communicated or stored, services with E2EE are better at protecting user data from data breaches and espionage. Computer security experts, digital freedom organizations, and human rights activists advocate for the use of E2EE due to its security and privacy benefits, including its ability to resist mass surveillance. Popular messaging apps like WhatsApp, iMessage, Facebook Messenger, and Signal use end-to-end encryption for chat messages, with some also supporting E2EE of voice and video calls. As of May 2025, WhatsApp is the most widely used E2EE messaging service, with over 3 billion users. Meanwhile, Signal with an estimated 70 million users, is regarded as the current gold standard in secure messaging by cryptographers, protestors, and journalists. Since end-to-end encrypted services cannot offer decrypted messages in response to government requests, the proliferation of E2EE has been met with controversy. Around the world, governments, law enforcement agencies, and child protection groups have expressed concerns over its impact on criminal investigations. As of 2025, some governments have successfully passed legislation targeting E2EE, such as Australia's Telecommunications and Other Legislation Amendment Act (2018) and the Online Safety Act (2023) in the UK. Other attempts at restricting E2EE include the EARN IT Act in the US and the Child Sexual Abuse Regulation in the EU.[1] Nevertheless, some government bodies such as the UK's Information Commissioner's Office and the US's Cybersecurity and Infrastructure Security Agency (CISA) have argued for the use of E2EE, with Jeff Greene of the CISA advising that "encryption is your friend" following the discovery of the Salt Typhoon espionage campaign in 2024. == Definitions == End-to-end encryption is a means of ensuring the security of communications in applications like secure messaging. Under E2EE, messages are encrypted on the sender's device such that they can be decoded only by the final recipient's device. In many non-E2EE messaging systems, including email and many chat platforms, messages pass through intermediaries and are stored by a third party service provider, from which they are retrieved by the recipient. Even if messages are encrypted, they are only encrypted 'in transit', and are thus accessible by the service provider. Server-side disk encryption is also distinct from E2EE because it does not prevent the service provider from viewing the information, as they have the encryption keys and can simply decrypt it. The term "end-to-end encryption" originally only meant that the communication is never decrypted during its transport from the sender to the receiver. For example, around 2003, E2EE was proposed as an additional layer of encryption for GSM or TETRA, in addition to the existing radio encryption protecting the communication between the mobile device and the network infrastructure. This has been standardized by SFPG for TETRA. Note that in TETRA, the keys are generated by a Key Management Centre (KMC) or a Key Management Facility (KMF), not by the communicating users. Later, around 2014, the meaning of "end-to-end encryption" started to evolve when WhatsApp encrypted a portion of its network, requiring that not only the communication stays encrypted during transport, but also that the provider of the communication service is not able to decrypt the communications—maliciously or when requested by law enforcement agencies. Similarly, messages must be undecryptable in transit by attackers through man-in-the-middle attacks. This new meaning is now the widely accepted one. == Motivations == The lack of end-to-end encryption can allow service providers to easily provide search and other features, or to scan for illegal and unacceptable content. However, it also means that content can be read by anyone who has access to the data stored by the service provider, by design or via a backdoor. This can be a concern in many cases where privacy is important, such as in governmental and military communications, financial transactions, and when sensitive information such as health and biometric data are sent. If this content were shared without E2EE, a malicious actor or adversarial government could obtain it through unauthorized access or subpoenas targeted at the service provider. E2EE alone does not guarantee privacy or security. For example, the data may be held unencrypted on the user's own device or accessed through their own app if their credentials are compromised. == Modern implementations == === Messaging === In May 2026, Meta ended support for end-to-end encryption (E2EE) on Instagram, reversing a previous commitment to expand the technology across its messaging services. The company justified the move as a measure to mitigate fraudulent activity and facilitate the detection of harmful content. The decision highlighted a conflict between digital privacy and online safety; while child protection organizations supported the change to better identify predatory behavior, privacy advocates argued that removing E2EE compromises user security. As of 2025, messaging apps like Signal and WhatsApp are designed to exclusively use end-to-end encryption. Both Signal and WhatsApp use the Signal Protocol. Other messaging apps and protocols that support end-to-end encryption include Facebook Messenger, iMessage, Telegram, Matrix, and Keybase. Although Telegram supports end-to-end encryption, it has been criticized for not enabling it by default, instead supporting E2EE through opt-in "secret chats". As of 2020, Telegram did not support E2EE for group chats and no E2EE on its desktop clients. In 2022, after controversy over the use of Facebook Messenger messages in an abortion lawsuit in Nebraska, Facebook added support for end-to-end encryption in the Messenger app. Writing for Wired, technologist Albert Fox Cahn criticized Messenger's approach to end-to-end encryption, which required the user to opt into E2EE for each conversation and split the message thread into two chats which were easy for users to confuse. In December 2023, Facebook announced plans to enable end-to-end encryption by default despite pressure from British law enforcement agencies. As of 2016, many server-based communications systems did not include end-to-end encryption. These systems can only guarantee the protection of communications between clients and servers, meaning that users have to trust the third parties who are running the servers with the sensitive content. End-to-end encryption is regarded as safer because it reduces the number of parties who might be able to interfere or break the encryption. In the case of instant messaging, users may use a third-party client or plugin to implement an end-to-end encryption scheme over an otherwise non-E2EE protocol. === Audio and video conferencing === Signal and WhatsApp use end-to-end encryption for audio and video calls. Since 2020, Signal has also supported end-to-encrypted video calls. In 2024, Discord added end-to-end encryption for audio and video calls, voice channels, and certain live streams. However, they had no plans to implement E2EE for messages. In 2020, after acquiring Keybase, Zoom announced end-to-end encryption would be limited to paid accounts. Following criticism from human rights advocates, Zoom extended the feature to all users with accounts. In 2021, Zoom settled an $85M class action lawsuit over past misrepresentation about end-to-end encryption. The FTC confirmed Zoom previously retained access to meeting keys. === Other uses === Some encrypted backup and file sharing services provide client-side encryption. Nextcloud and MEGA, offer end-to-end encryption of shared files. The term "end-to-end encryption" is sometimes incorrectly used to describe client-side encryption. Some non-E2EE systems, such as Lavabit and Hushmail, have described themselves as offering "end-to-end" encryption when they did not. == Law enforcement and regulation == In 2022, Facebook Messenger came under scrutiny because the messages between a mother and daughter in Nebraska were used to seek criminal charges in an abortion-rel
Read more →
Mortimer Rogoff

Mortimer Alan Rogoff (May 2, 1921 – August 1, 2008) was an American inventor, businessman, and author as well as an amateur photographer and radio operator. He is recognized for his work in spread spectrum technology which is the technology that modern cell phones and GPS systems are based on. He is also considered the grandfather of the electronic navigation chart. == Early life == Rogoff was born in Brooklyn, New York. He earned his B.S.E.E. from Rensselaer Polytechnic Institute in 1943 and his M.S.E.E. from Columbia University in 1948. While at Rensselaer he was a member of Kappa Nu fraternity and the Features Editor for the student newspaper. During World War II, he enlisted in the United States Navy and worked on developing radio communication and aerial navigation systems. One of the techniques he developed was undetectable by Axis forces because its power was below that of the background noise and its frequency varied in random ways. This secure transmission was the beginning of spread spectrum technology which would become the basis for GPS and CDMA cellular telephone systems. Although he was never able to patent the technology because it was a military secret he did get some recognition for it almost forty years later when he received the Institute of Electrical and Electronics Engineers’ Pioneer Award in 1981. == Career == Rogoff worked for twenty-two years (1946 to 1968) for ITT Laboratories in New Jersey. In 1958, he became their deputy director of Engineering. He was Vice President of ITT Laboratories from 1962 to 1963. From 1963 to 1968, he was promoted to the corporate staff where he became head of European operations. In 1968 he left ITT to work for the Diebold Group where he became an Executive Vice President. After leaving the Diebold Group he founded several technology and automation businesses, including his own consulting firm, and Teletext Communications Corporation. Later in the 1970s, he was a Principal with Booz Allen Hamilton. In 1979, his book ‘’Calculator Navigation’’ was published. This book demonstrated practical methods for calculating precise ship locations using radio navigation with a consumer calculator. In 1981, he founded a new company, Navigation Sciences Inc., in Bethesda, Maryland. With this company he patented a method for marine navigation that combined radar maps with electronic charts in 1986. This was a major advancement in field. Today, this system is known as the Electronic Chart Display and Information System (ECDIS). Rogoff had seen the need for a new charting system in 1968 from his apartment at 180 East End Avenue in New York City. From there, he saw a boating accident where a life was lost and decided there had to be a way to automate navigation. Rogoff then became of member of the International Maritime Organization’s (IMO) sub-committee on Safety of Navigation, a representative to the International Electrotechnical Commission, and became the chairman of the Radio Technical Commission for Maritime Services Special Committee 109 on Electronic Charts. He was able to use his influence on these boards to push through a proposal of ECDIS standards in 1989 where none has been before. As his friend Giuseppe Carnevali said, “Although nobody could argue against the need for a standard, no one was ready to endorse one; however, nobody was brave enough to oppose it.” A Test Bed project on these proposals was conducted by the United States Coast Guard. The amended standards were accepted by the IMO in November, 1995. In 2000, he was named as a Fellow of the Institute of Navigation. He was also a Fellow of the Institute of Electrical and Electronics Engineers. During this time, he was also president of the Navigational Electronic Charts System Association. == Personal == In 1979, he moved to Washington, D.C. and bought a home in Nantucket, Massachusetts. He married Sheila Zunser in 1943 and they were together for sixty-five years. They had three daughters: Louisa Thompson, Alice Rogoff, and Julia Peach. His sister was sociologist Natalie Rogoff Ramsøy of the University of Oslo. He was a member of the Cosmos Club and President of The Navigational Electronic Chart System Association (NECSA). He was a very good amateur photographer and liked amateur radio (call sign W2EE). He died in Nantucket from bladder cancer. == Patents == Patent number: 4176316 – Secure Communication System – November 27, 1979 With Louis A. DeRosa Patent number: 4590569 – Electronic Navigation System – May 20, 1986 With Peter M. Winkler and John N. Ackley Patent number: RE34004 – Secure Communication System – July 21, 1992 With Louis A. DeRosa == Publications == Rogoff, Mortimer September 1957. Automatic Analysis of Infrared Spectra. Annals of the New York Academy of Sciences; vol. 69: no. 1: 27–37. Gen. P.C. Sandretto and Mortimer Rogoff. 1958 “A Novel Concept for Application to the Control of Airways Traffic.” NAVIGATION: Journal of The Institute of Navigation; vol. 6: no. 2: 102–107 Rogoff, Mortimer 1979. Calculator Navigation; ISBN 0-393-03192-6. Published by W.W. Norton & Company (New York and London). Rogoff, Mortimer December 1985. Electronic Charting. Yachting; vol. 158: no. 6: 54–57. Rogoff, Mortimer Winter 1990. Electronic Charts in the Nineties. NAVIGATION: Journal of The Institute of Navigation; vol. 37: no. 4: 305–318.
Read more →
Institute of Telecommunications Professionals

The Institute of Telecommunications Professionals (ITP) is a membership organisation for professionals in the telecommunications industry, based in the United Kingdom. The Institute was originally founded in 1906. It is now a registered company with Companies House in the United Kingdom, incorporated in 2002. Brendan O' Mahony has been the chief executive of the ITP. Lucy Woods presided over ITP for fifteen years, until 2018, when the organization named Kevin Paige chairman for five years. In 2022 the ITP appointed its new CEO, Charlotte Goodwill. In 2021, the ITP assisted a UK fibre network Vorboss in establishing its training academy. In 2023, the ITP appointed Tim Creswick, the CEO of Vorboss, as the new chair of its board of directors. The institute has an associated journal, the Journal of the Institute of Telecommunications Professionals, established in 2007 and published quarterly.
Read more →
Point-set registration

In computer vision, pattern recognition, and robotics, point-set registration, also known as point-cloud registration or scan matching, is the process of finding a spatial transformation (e.g., scaling, rotation and translation) that aligns two point clouds. The purpose of finding such a transformation includes merging multiple data sets into a globally consistent model (or coordinate frame), and mapping a new measurement to a known data set to identify features or to estimate its pose. Raw 3D point cloud data are typically obtained from Lidars and RGB-D cameras. 3D point clouds can also be generated from computer vision algorithms such as triangulation, bundle adjustment, and more recently, monocular image depth estimation using deep learning. For 2D point set registration used in image processing and feature-based image registration, a point set may be 2D pixel coordinates obtained by feature extraction from an image, for example corner detection. Point cloud registration has extensive applications in autonomous driving, motion estimation and 3D reconstruction, object detection and pose estimation, robotic manipulation, simultaneous localization and mapping (SLAM), panorama stitching, virtual and augmented reality, and medical imaging. As a special case, registration of two point sets that only differ by a 3D rotation (i.e., there is no scaling and translation), is called the Wahba Problem and also related to the orthogonal procrustes problem. == Formulation == The problem may be summarized as follows: Let { M , S } {\displaystyle \lbrace {\mathcal {M}},{\mathcal {S}}\rbrace } be two finite size point sets in a finite-dimensional real vector space R d {\displaystyle \mathbb {R} ^{d}} , which contain M {\displaystyle M} and N {\displaystyle N} points respectively (e.g., d = 3 {\displaystyle d=3} recovers the typical case of when M {\displaystyle {\mathcal {M}}} and S {\displaystyle {\mathcal {S}}} are 3D point sets). The problem is to find a transformation to be applied to the moving "model" point set M {\displaystyle {\mathcal {M}}} such that the difference (typically defined in the sense of point-wise Euclidean distance) between M {\displaystyle {\mathcal {M}}} and the static "scene" set S {\displaystyle {\mathcal {S}}} is minimized. In other words, a mapping from R d {\displaystyle \mathbb {R} ^{d}} to R d {\displaystyle \mathbb {R} ^{d}} is desired which yields the best alignment between the transformed "model" set and the "scene" set. The mapping may consist of a rigid or non-rigid transformation. The transformation model may be written as T {\displaystyle T} , using which the transformed, registered model point set is: The output of a point set registration algorithm is therefore the optimal transformation T ⋆ {\displaystyle T^{\star }} such that M {\displaystyle {\mathcal {M}}} is best aligned to S {\displaystyle {\mathcal {S}}} , according to some defined notion of distance function dist ⁡ ( ⋅ , ⋅ ) {\displaystyle \operatorname {dist} (\cdot ,\cdot )} : where T {\displaystyle {\mathcal {T}}} is used to denote the set of all possible transformations that the optimization tries to search for. The most popular choice of the distance function is to take the square of the Euclidean distance for every pair of points: where ‖ ⋅ ‖ 2 {\displaystyle \|\cdot \|_{2}} denotes the vector 2-norm, s m {\displaystyle s_{m}} is the corresponding point in set S {\displaystyle {\mathcal {S}}} that attains the shortest distance to a given point m {\displaystyle m} in set M {\displaystyle {\mathcal {M}}} after transformation. Minimizing such a function in rigid registration is equivalent to solving a least squares problem. == Types of algorithms == When the correspondences (i.e., s m ↔ m {\displaystyle s_{m}\leftrightarrow m} ) are given before the optimization, for example, using feature matching techniques, then the optimization only needs to estimate the transformation. This type of registration is called correspondence-based registration. On the other hand, if the correspondences are unknown, then the optimization is required to jointly find out the correspondences and transformation together. This type of registration is called simultaneous pose and correspondence registration. === Rigid registration === Given two point sets, rigid registration yields a rigid transformation which maps one point set to the other. A rigid transformation is defined as a transformation that does not change the distance between any two points. Typically such a transformation consists of translation and rotation. In rare cases, the point set may also be mirrored. In robotics and computer vision, rigid registration has the most applications. === Non-rigid registration === Given two point sets, non-rigid registration yields a non-rigid transformation which maps one point set to the other. Non-rigid transformations include affine transformations such as scaling and shear mapping. However, in the context of point set registration, non-rigid registration typically involves nonlinear transformation. If the eigenmodes of variation of the point set are known, the nonlinear transformation may be parametrized by the eigenvalues. A nonlinear transformation may also be parametrized as a thin plate spline. === Other types === Some approaches to point set registration use algorithms that solve the more general graph matching problem. However, the computational complexity of such methods tend to be high and they are limited to rigid registrations. In this article, we will only consider algorithms for rigid registration, where the transformation is assumed to contain 3D rotations and translations (possibly also including a uniform scaling). The PCL (Point Cloud Library) is an open-source framework for n-dimensional point cloud and 3D geometry processing. It includes several point registration algorithms. == Correspondence-based registration == Correspondence-based methods assume the putative correspondences m ↔ s m {\displaystyle m\leftrightarrow s_{m}} are given for every point m ∈ M {\displaystyle m\in {\mathcal {M}}} . Therefore, we arrive at a setting where both point sets M {\displaystyle {\mathcal {M}}} and S {\displaystyle {\mathcal {S}}} have N {\displaystyle N} points and the correspondences m i ↔ s i , i = 1 , … , N {\displaystyle m_{i}\leftrightarrow s_{i},i=1,\dots ,N} are given. === Outlier-free registration === In the simplest case, one can assume that all the correspondences are correct, meaning that the points m i , s i ∈ R 3 {\displaystyle m_{i},s_{i}\in \mathbb {R} ^{3}} are generated as follows:where l > 0 {\displaystyle l>0} is a uniform scaling factor (in many cases l = 1 {\displaystyle l=1} is assumed), R ∈ SO ( 3 ) {\displaystyle R\in {\text{SO}}(3)} is a proper 3D rotation matrix ( SO ( d ) {\displaystyle {\text{SO}}(d)} is the special orthogonal group of degree d {\displaystyle d} ), t ∈ R 3 {\displaystyle t\in \mathbb {R} ^{3}} is a 3D translation vector and ϵ i ∈ R 3 {\displaystyle \epsilon _{i}\in \mathbb {R} ^{3}} models the unknown additive noise (e.g., Gaussian noise). Specifically, if the noise ϵ i {\displaystyle \epsilon _{i}} is assumed to follow a zero-mean isotropic Gaussian distribution with standard deviation σ i {\displaystyle \sigma _{i}} , i.e., ϵ i ∼ N ( 0 , σ i 2 I 3 ) {\displaystyle \epsilon _{i}\sim {\mathcal {N}}(0,\sigma _{i}^{2}I_{3})} , then the following optimization can be shown to yield the maximum likelihood estimate for the unknown scale, rotation and translation:Note that when the scaling factor is 1 and the translation vector is zero, then the optimization recovers the formulation of the Wahba problem. Despite the non-convexity of the optimization (cb.2) due to non-convexity of the set SO ( 3 ) {\displaystyle {\text{SO}}(3)} , seminal work by Berthold K.P. Horn showed that (cb.2) actually admits a closed-form solution, by decoupling the estimation of scale, rotation and translation. Similar results were discovered by Arun et al. In addition, in order to find a unique transformation ( l , R , t ) {\displaystyle (l,R,t)} , at least N = 3 {\displaystyle N=3} non-collinear points in each point set are required. More recently, Briales and Gonzalez-Jimenez have developed a semidefinite relaxation using Lagrangian duality, for the case where the model set M {\displaystyle {\mathcal {M}}} contains different 3D primitives such as points, lines and planes (which is the case when the model M {\displaystyle {\mathcal {M}}} is a 3D mesh). Interestingly, the semidefinite relaxation is empirically tight, i.e., a certifiably globally optimal solution can be extracted from the solution of the semidefinite relaxation. === Robust registration === The least squares formulation (cb.2) is known to perform arbitrarily badly in the presence of outliers. An outlier correspondence is a pair of measurements s i ↔ m i {\displaystyle s_{i}\leftrightarrow m_{i}} that departs from the generative model (cb.1). In this case, one can consider a differen
Read more →
Style sheet (web development)

A web style sheet is a form of separation of content and presentation for web design in which the markup (i.e., HTML or XHTML) of a webpage contains the page's semantic content and structure, but does not define its visual layout (style). Instead, the style is defined in an external style sheet file using a style sheet language such as CSS or XSLT. This design approach is identified as a "separation" because it largely supersedes the antecedent methodology in which a page's markup defined both style and structure. The philosophy underlying this methodology is a specific case of separation of concerns. == Benefits == Separation of style and content has advantages, but has only become practical after improvements in popular web browsers' CSS implementations. === Speed === Overall, users experience of a site utilising style sheets will generally be quicker than sites that do not use the technology. ‘Overall’ as the first page will probably load more slowly – because the style sheet AND the content will need to be transferred. Subsequent pages will load faster because no style information will need to be downloaded – the CSS file will already be in the browser’s cache. === Maintainability === Holding all the presentation styles in one file can reduce the maintenance time and reduces the chance of error, thereby improving presentation consistency. For example, the font color associated with a type of text element may be specified — and therefore easily modified — throughout an entire website simply by changing one short string of characters in a single file. The alternative approach, using styles embedded in each individual page, would require a cumbersome, time consuming, and error-prone edit of every file. === Accessibility === Sites that use CSS with either XHTML or HTML are easier to tweak so that they appear similar in different browsers (Chrome, Internet Explorer, Mozilla Firefox, Opera, Safari, etc.). Sites using CSS "degrade gracefully" in browsers unable to display graphical content, such as Lynx, or those so very old that they cannot use CSS. Browsers ignore CSS that they do not understand, such as CSS 3 statements. This enables a wide variety of user agents to be able to access the content of a site even if they cannot render the style sheet or are not designed with graphical capability in mind. For example, a browser using a refreshable braille display for output could disregard layout information entirely, and the user would still have access to all page content. === Customization === If a page's layout information is stored externally, a user can decide to disable the layout information entirely, leaving the site's bare content still in a readable form. Site authors may also offer multiple style sheets, which can be used to completely change the appearance of the site without altering any of its content. Most modern web browsers also allow the user to define their own style sheet, which can include rules that override the author's layout rules. This allows users, for example, to bold every hyperlink on every page they visit. Browser extensions like Stylish and Stylus have been created to facilitate management of such user style sheets. === Consistency === Because the semantic file contains only the meanings an author intends to convey, the styling of the various elements of the document's content is very consistent. For example, headings, emphasized text, lists and mathematical expressions all receive consistently applied style properties from the external style sheet. Authors need not concern themselves with the style properties at the time of composition. These presentational details can be deferred until the moment of presentation. === Portability === The deferment of presentational details until the time of presentation means that a document can be easily re-purposed for an entirely different presentation medium with merely the application of a new style sheet already prepared for the new medium and consistent with elemental or structural vocabulary of the semantic document. A carefully authored document for a web page can easily be printed to a hard-bound volume complete with headers and footers, page numbers and a generated table of contents simply by applying a new style sheet.
Read more →
Zero-overhead looping

In computer architecture, zero-overhead looping is a hardware feature found in some processors that enables loops to execute without the performance cost of traditional loop control instructions. Instead of software managing loop iterations, the processor's hardware handles repetition automatically, saving clock cycles and improving efficiency. This technique is commonly employed in digital signal processors (DSPs) and certain complex instruction set computer (CISC) architectures. == Background == In many instruction sets, a loop must be implemented by using instructions to increment or decrement a counter, check whether the end of the loop has been reached, and if not jump to the beginning of the loop so it can be repeated. Although this typically only represents around 3–16 bytes of space for each loop, even that small amount could be significant depending on the size of the CPU caches. More significant is that those instructions each take time to execute, time which is not spent doing useful work. The overhead of such a loop is apparent compared to a completely unrolled loop, in which the body of the loop is duplicated exactly as many times as it will execute. In that case, no space or execution time is wasted on instructions to repeat the body of the loop. However, the duplication caused by loop unrolling can significantly increase code size, and the larger size can even impact execution time due to cache misses. (For this reason, it's common to only partially unroll loops, such as transforming it into a loop which performs the work of four iterations in one step before repeating. This balances the advantages of unrolling with the overhead of repeating the loop.) Moreover, completely unrolling a loop is only possible for a limited number of loops: those whose number of iterations is known at compile time. For example, the following C code could be compiled and optimized into the following x86 assembly code: == Implementation == Processors with zero-overhead looping have machine instructions and registers to automatically repeat one or more instructions. Depending on the instructions available, these may only be suitable for count-controlled loops ("for loops") in which the number of iterations can be calculated in advance, or only for condition-controlled loops ("while loops") such as operations on null-terminated strings. === Examples === ==== PIC ==== In the PIC instruction set, the REPEAT and DO instructions implement zero-overhead loops. REPEAT only repeats a single instruction, while DO repeats a specified number of following instructions. ==== Blackfin ==== Blackfin offers two zero-overhead loops. The loops can be nested; if both hardware loops are configured with the same "loop end" address, loop 1 will behave as the inner loop and repeat, and loop 0 will behave as the outer loop and repeat only if loop 1 would not repeat. Loops are controlled using the LTx and LBx registers (x either 0 to 1) to set the top and bottom of the loop — that is, the first and last instructions to be executed, which can be the same for a loop with only one instruction — and LCx for the loop count. The loop repeats if LCx is nonzero at the end of the loop, in which case LCx is decremented. The loop registers can be set manually, but this would typically consume 6 bytes to load the registers, and 8–16 bytes to set up the values to be loaded. More common is to use the loop setup instruction (represented in assembly as either LOOP with pseudo-instruction LOOP_BEGIN and LOOP_END, or in a single line as LSETUP), which optionally initializes LCx and sets LTx and LBx to the desired values. This only requires 4–6 bytes, but can only set LTx and LBx within a limited range relative to where the loop setup instruction is located. ==== x86 ==== The x86 assembly language REP prefixes implement zero-overhead loops for a few instructions (namely MOVS/STOS/CMPS/LODS/SCAS). Depending on the prefix and the instruction, the instruction will be repeated a number of times with (E)CX holding the repeat count, or until a match (or non-match) is found with AL/AX/EAX or with DS:[(E)SI]. This can be used to implement some types of searches and operations on null-terminated strings.
Read more →
Digital heritage

The Charter on the Preservation of Digital Heritage of UNESCO defines digital heritage as embracing "cultural, educational, scientific and administrative resources, as well as technical, legal, medical and other kinds of information created digitally, or converted into digital form from existing analogue resources". Digital heritage also includes the use of digital media in the service of understanding and preserving cultural or natural heritage. The digitization of both cultural heritage and Natural heritage serves to enable the permanent access of current and future generations to culturally important objects ranging from literature and paintings to flora, fauna, or habitats. It is also used in the preservation and access of objects with enduring or significant historical, scientific, or cultural value including buildings, archeological sites, and natural phenomena. The main idea is the transformation of a material object into a virtual copy. It should not be confused with digital humanities, which uses digitizing technology to specifically help with research. There have been several debates concerning the efficiency of the process of digitizing heritage. Some of the drawbacks refer to the deterioration and technological obsolescence due to the lack of funding for archival materials and underdeveloped policies that would regulate such a process. Another main social debate has taken place around the restricted accessibility due to the digital divide that exists around the world. Nevertheless, new technologies enable easy, instant and cross boarder access to the digitized work. Many of these technologies include spatial and surveying technology to gain aerial or 3D images. Digital heritage is also used to monitor cultural heritage sites over years to help with preservation, maintenance, and sustainable tourism. It aims to observe any changes, diseases, or deterioration that may occur on objects. == Cultural and natural heritage == Digital Heritage that is not born-digital can be divided into two separate groups—digital cultural heritage and digital natural heritage. Digital cultural heritage is the maintenance or preservation of cultural objects through digitization. These are objects, in some cases entire cities, that are considered of cultural importance. These objects are sometimes able to be digitized or physically represented in minute detail. Digital cultural heritage also includes intangible heritage. These are things such as "oral traditions, customs, value systems, skills, traditional dances, diets, performances" and other unique features of a culture. Intangible heritage is particularly vulnerable to destruction due to urbanization. There are several projects and programs which concentrate on digital cultural heritage. One such project is Mapping Gothic France, which aims to document and preserve cathedrals across France using images, VR tours, laser scans, and panoramas. This allows for scientific and historical study and preservation of the cathedrals and also provides detailed access to the sites for anyone in the world. The aim of projects like these is to help with the preservation and restoration of cultural objects. After the fire at Notre-Dame de Paris in 2019, digital scans are a major component in the ongoing restoration. Digital natural heritage pertains to objects of natural heritage that are considered of cultural, scientific, or aesthetic importance. Digital heritage in this instance is used not only to grant access to these objects, but to monitor any changes over time, such as with plant or animal habitats. Geographic information systems are a form of technology that is used primarily in the study of natural heritage. Western Australia has one such digital heritage project where they have created a digital repository of native plants important to both the region and the Aboriginal people. This is in order to protect and preserve the important biological heritage of Western Australia. == Educational impact == The digitization of these heritage objects has impacts around the world and across many disciplines. The increase of digital items means that people, especially the youth, are able to learn about new objects and cultures online through various media. They provide viewers with a more in-depth experience with an item or place, instead of just an image. The media is also able to be curated to age- or educational-level appropriateness, making learning easier. Some of the technology used in education, especially in museums, includes mobile apps, virtual reality, social media, and video games. Cultural heritage institutions are using this technology to try to expand access, increase appreciation for these items, and to gain new viewpoints on their collections. Digital heritage also helps scientists, archeologists, or other historians and specialists collect data on these objects, providing more information on the objects and the past. Digital Heritage is still currently being studied and improved by several sectors invested in cultural and intellectual preservation. It is particularly of interest to museums, governments, and academic institutions. Research by these groups are creating new concepts, methodologies, and techniques for the implementation of digital heritage to protect this type of cultural and natural heritage. As new technologies are created, museums and other heritage institutions are provided with more ways of disseminating their information and engaging with the public. A lack of resources within certain groups may still hinder everyone from accessing digital heritage. == Technologies used == The digitization of cultural heritage is attained through several means. Some of the main technology used is spatial and surveying technology. Space archaeological technology - Observations from space satellites are non-intrusive and can be integrated with other technologies on the ground. It is used to photograph vast areas of earth and help with research. Remnants of ancient civilizations or other human objects are also able to be spotted via satellite imaging. Unmanned aerial vehicles - UAV, such as drones, are commonly used in digitization of cultural heritage objects. The Great Wall of China is one such site that has been digitized and analyzed through unmanned aerial vehicle investigation. The resulting images, 3-D scans, maps, and other data are used to evaluate and maintain the Great Wall. Laser Scanning - Laser scanning is used to scan an area and recreate spatially accurate depictions, such as a 3D model. Virtual and Augmented Reality - VR is used primarily for education but does have uses for reconstruction and research. It is used to provide users with an immersive experience, as though they are actually at the site. Geographic Information systems - GIS are used primarily to study objects and sites over time. It is also important in studying the socioeconomic status of the past. 3D Modeling - 3D modeling has become more widely used due to an increase in technology that works specifically with heritage sites. It is often used in tandem with GIS to reconstruct objects for restoration, documentation, preservation, and educational purposes. Data is collected using satellite or other aerial imaging and ground-based imaging. There is some concern about the accuracy and authenticity of these types of digital reconstructions and their effects on the sites themselves. A major barrier to digital heritage is the amount of resources it takes to undertake such projects, such as money, time, and technology. Money and the lack of qualified personnel are two that are considered the most obstructive. This is especially an issue in less developed areas or within underfunded groups such as minorities. == Virtual heritage == A particular branch of digital heritage, known as "virtual heritage", is formed by the use of information technology with the aim of recreating the experience of existing cultural heritage, as in (approximations of) virtual reality. It is hard to differentiate this branch from the core contribution of digital heritage which is storing the heritage data digitally. Parsinejad et al. developed two techniques for Digital Twinning of the architectural assets and representation of the physical assets virtually in the museum context. Two techniques are hand recording and digital recording and both have challenges in adoption and implementation of Digital Twin as a revolutionary concept. == Digital heritage stewardship == Digital heritage stewardship is a form of digital curation which is modeled after collaborative curation. Digital heritage stewardship means stepping away from typical curatorial practices (e.g. discovering, arranging, and sharing information, material, and/or content) in favor of practices which allow its stakeholders the opportunity to contribute historical, political, and social context and culture. The collaborative practice encourages the creation, engagement, and maintena
Read more →
Gonioreflectometer

A gonioreflectometer is a device for measuring a bidirectional reflectance distribution function (BRDF). The device consists of a light source illuminating the material to be measured and a sensor that captures light reflected from that material. The light source should be able to illuminate and the sensor should be able to capture data from a hemisphere around the target. The hemispherical rotation dimensions of the sensor and light source are the four dimensions of the BRDF. The 'gonio' part of the word refers to the device's ability to measure at different angles. Several similar devices have been built and used to capture data for similar functions. Most of these devices use a camera instead of the light intensity-measuring sensor to capture a two-dimensional sample of the target. Examples include: a spatial gonioreflectometer for capturing the SBRDF (McAllister, 2002). a camera gantry for capturing the light field (Levoy and Hanrahan, 1996). an unnamed device for capturing the bidirectional texture function (Dana et al., 1999).
Read more →
Nitro Zeus

Nitro Zeus is the project name for a well funded comprehensive cyber attack plan created as a mitigation strategy after the Stuxnet malware campaign and its aftermath. Unlike Stuxnet, that was loaded onto a system after the design phase to affect its proper operation, Nitro Zeus's objectives are built into a system during the design phase unbeknownst to the system users. This built-in feature allows a more assured and effective cyber attack against the system's users. The information about its existence was raised during research and interviews carried out by Alex Gibney for his Zero Days documentary film. The proposed long term widespread infiltration of major Iranian systems would disrupt and degrade communications, power grid, and other vital systems as desired by the cyber attackers. This was to be achieved by electronic implants in Iranian computer networks. The project was seen as one pathway in alternatives to full-scale war.
Read more →
The Culture of Connectivity

The Culture of Connectivity: A Critical History of Social Media is a book by José van Dijck published by Oxford University Press in 2013 on social media platforms and their history. The author considers the histories of five social media platforms: Facebook, Twitter, Flickr, YouTube, and Wikipedia. She focuses on how their technological, social and cultural dimensions contribute to their current status.
Read more →
Flat-panel display

A flat-panel display (FPD) is an electronic display used to display visual content such as text or images. It is present in consumer, medical, transportation, and industrial equipment. Flat-panel displays are thin, lightweight, provide better linearity and are capable of higher resolution and contrast than typical consumer-grade TVs from earlier eras. They are usually less than 10 centimetres (3.9 in) thick. While the highest resolution for consumer-grade CRT televisions is 1080i, many interactive flat panels in the 2020s are capable of 1080p and 4K resolution. In the 2010s, portable consumer electronics such as laptops, mobile phones, and portable cameras have used flat-panel displays since they consume less power and are lightweight. As of 2016, flat-panel displays have almost completely replaced CRT displays. Most 2010s-era flat-panel displays use LCD or light-emitting diode (LED) technologies, sometimes combined. Most LCD screens are back-lit with color filters used to display colors. In many cases, flat-panel displays are combined with touch screen technology, which allows the user to interact with the display in a natural manner. For example, modern smartphone displays often use OLED panels, with capacitive touch screens. Flat-panel displays can be divided into two display device categories: volatile and static. The former requires that pixels be periodically electronically refreshed to retain their state (e.g. liquid-crystal displays (LCD)), and can only show an image when it has power. On the other hand, static flat-panel displays rely on materials whose color states are bistable, such as displays that make use of e-ink technology, and as such retain content even when power is removed. == History == The first engineering proposal for a flat-panel TV was by General Electric in 1954 as a result of its work on radar monitors. The publication of their findings gave all the basics of future flat-panel TVs and monitors. But GE did not continue with the R&D required and never built a working flat panel at that time. The first production flat-panel display was the Aiken tube, developed in the early 1950s and produced in limited numbers in 1958. This saw some use in military systems as a heads up display and as an oscilloscope monitor, but conventional technologies overtook its development. Attempts to commercialize the system for home television use ran into continued problems and the system was never released commercially. Dennis Gabor, better known as the inventor of holography, patented a flat-screen CRT in 1958. This was substantially similar to Aiken's concept, and led to a years-long patent battle. By the time the lawsuits were complete, with Aiken's patent applying in the US and Gabor's in the UK, the commercial aspects had long lapsed, and the two became friends. Around this time, Clive Sinclair came across Gabor's work and began an ultimately unsuccessful decade-long effort to commercialize it. The Philco Predicta featured a relatively flat (for its day) cathode-ray tube setup and would be the first commercially released "flat panel" upon its launch in 1958; the Predicta was a commercial failure. The plasma display panel was invented in 1964 at the University of Illinois, according to The History of Plasma Display Panels. === Liquid-crystal displays (LC displays, or LCDs) === The MOSFET (metal–oxide–semiconductor field-effect transistor, or MOS transistor) was invented by Mohamed M. Atalla and Dawon Kahng at Bell Labs in 1959, and presented in 1960. Building on their work, Paul K. Weimer at RCA developed the thin-film transistor (TFT) in 1962. It was a type of MOSFET distinct from the standard bulk MOSFET. The idea of a TFT-based LCD was conceived by Bernard J. Lechner of RCA Laboratories in 1968. B.J. Lechner, F.J. Marlowe, E.O. Nester and J. Tults demonstrated the concept in 1968 with a dynamic scattering LCD that used standard discrete MOSFETs. The first active-matrix addressed electroluminescent display was made using TFTs by T. Peter Brody's Thin-Film Devices department at Westinghouse Electric Corporation in 1968. In 1973, Brody, J. A. Asars and G. D. Dixon at Westinghouse Research Laboratories demonstrated the first thin-film-transistor liquid-crystal display. Brody and Fang-Chen Luo demonstrated the first flat active-matrix liquid-crystal display (AM LCD) using TFTs in 1974. By 1982, pocket LCD TVs based on LCD technology were developed in Japan. The 2.1-inch Epson ET-10 Epson Elf was the first color LCD pocket TV, released in 1984. In 1988, a Sharp research team led by engineer T. Nagayasu demonstrated a 14-inch full-color LCD, which convinced the electronics industry that LCD would eventually replace CRTs as the standard television display technology. As of 2013, all modern high-resolution and high-quality electronic visual display devices use TFT-based active-matrix displays. === LED displays === The first usable LED display was developed by Hewlett-Packard (HP) and introduced in 1968. It was the result of research and development (R&D) on practical LED technology between 1962 and 1968, by a research team under Howard C. Borden, Gerald P. Pighini, and Mohamed M. Atalla, at HP Associates and HP Labs. In February 1969, they introduced the HP Model 5082-7000 Numeric Indicator. It was the first alphanumeric LED display, and was a revolution in digital display technology, replacing the Nixie tube for numeric displays and becoming the basis for later LED displays. In 1977, James P Mitchell prototyped and later demonstrated what was perhaps the earliest monochromatic flat-panel LED television display. Ching W. Tang and Steven Van Slyke at Eastman Kodak built the first practical organic LED (OLED) device in 1987. In 2003, Hynix produced an organic EL driver capable of lighting in 4,096 colors. In 2004, the Sony Qualia 005 was the first LED-backlit LCD. The Sony XEL-1, released in 2007, was the first OLED television. == Common types == === Liquid-crystal display (LCD) === Field-effect LCDs are lightweight, compact, portable, cheap, more reliable, and easier on the eyes than CRT screens. LCD screens use a thin layer of liquid crystal, a liquid that exhibits crystalline properties. It is sandwiched between two glass plates carrying transparent electrodes. Two polarizing films are placed at each side of the LCD. By generating a controlled electric field between electrodes, various segments or pixels of the liquid crystal can be activated, causing changes in their polarizing properties. These polarizing properties depend on the alignment of the liquid-crystal layer and the specific field-effect used, being either twisted nematic (TN), in-plane switching (IPS) or vertical alignment (VA). Color is produced by applying appropriate color filters (red, green and blue) to the individual subpixels. LC displays are used in various electronics like watches, calculators, mobile phones, TVs, computer monitors and laptops screens etc. === LED-LCD === Most earlier large LCD screens were back-lit using a number of CCFL (cold-cathode fluorescent lamps). However, small pocket size devices almost always used LEDs as their illumination source. With the improvement of LEDs, almost all new displays are now equipped with LED backlight technology. The image is still generated by the LCD layer. === Plasma panel === A plasma display consists of two glass plates separated by a thin gap filled with a gas such as neon. Each of these plates has several parallel electrodes running across it. The electrodes on the two plates are at right angles to each other. A voltage applied between the two electrodes one on each plate causes a small segment of gas at the two electrodes to glow. The glow of gas segments is maintained by a lower voltage that is continuously applied to all electrodes. By 2010, consumer plasma displays had been discontinued by numerous manufacturers. === Electroluminescent panel === In an electroluminescent display, the image is created by applying electrical signals to the plates which make the phosphor glow. === Organic light-emitting diode === An OLED (organic light-emitting diode) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound which emits light in response to an electric current. This layer of organic semiconductor is situated between two electrodes; typically, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television screens, computer monitors, portable systems such as mobile phones, handheld game consoles and PDAs. === Quantum-dot light-emitting diode === QLED or quantum dot LED is a flat panel display technology introduced by Samsung under this trademark. Other television set manufacturers such as Sony have used the same technology to enhance the backlighting of LCD TVs already in 2013. Quantum dots create their own unique light when illuminated by a light source of shorter wavelength such as blue LEDs. Th
Read more →
Application-release automation

Application-release automation (ARA) refers to the process of packaging and deploying an application or update of an application from development, across various environments, and ultimately to production. ARA solutions must combine the capabilities of deployment automation, environment management and modeling, and release coordination. == Relationship with DevOps == ARA tools help cultivate DevOps best practices by providing a combination of automation, environment modeling and workflow-management capabilities. These practices help teams deliver software rapidly, reliably and responsibly. ARA tools achieve a key DevOps goal of implementing continuous delivery with a large quantity of releases quickly. == Relationship with deployment == ARA is more than just software-deployment automation – it deploys applications using structured release-automation techniques that allow for an increase in visibility for the whole team. It combines workload automation and release-management tools as they relate to release packages, as well as movement through different environments within the DevOps pipeline. ARA tools help regulate deployments, how environments are created and deployed, and how and when releases are deployed. == ARA Solutions == All ARA solutions must include capabilities in automation, environment modeling, and release coordination. Additionally, the solution must provide this functionality without reliance on other tools.
Read more →
Cultural technology

Cultural technology (Korean: 문화기술; Hanja: 文化技術; RR: munhwagisul) is a system used by South Korean talent agencies to promote K-pop culture throughout the world as part of the Korean Wave. The system was developed by Lee Soo-man, founder of talent agency and record company SM Entertainment. == History == === Coinage === During a speech at the Stanford Graduate School of Business in 2011, Lee said he coined the term "cultural technology" as a system about fourteen years prior, when S.M. Entertainment decided to promote its K-pop artists to all of Asia. In the late 1990s, Lee and his colleagues created a manual on cultural technology, which specified the steps needed to popularize K-pop artists outside South Korea. "The manual, which all S.M. employees are instructed to learn, explains when to bring in foreign composers, producers, and choreographers; what chord progressions to use in what country; the precise color of eyeshadow a performer should wear in a particular country; the exact hand gestures he or she should make; and the camera angles to be used in the videos (a three-hundred-and-sixty-degree group shot to open the video, followed by a montage of individual closeups)," according to The New Yorker. The term "cultural technology," apart from Lee's systemized definition, can be traced back to the lectures of Michael White, an Australian social worker, educator, and therapeutic theorist and his works Narrative Means to Therapeutic Ends (1990) and Maps of Narrative Practice (2007). Its usage may also date further back to French philosopher Michel Foucault (1977). South Korean computer scientist Kwangyun Wohn said he coined the term "culture technology" in 1994. Cultural technology has also been one of six technology initiatives of the South Korean government since 2001. In regards to cultural technology, the Korean Wave is considered one of the most successful outcomes of government support of exporting Korean entertainment products. === The Four Core Stages === The cultural technology system originally employed by SM Entertainment since the 1990s existed in four stages: Casting, Training, Producing, and Marketing/Managing. Each of these four stages were curated to help spread the Hallyu wave through the development of its artists, and are present in the strategies of many other South Korean talent agencies when creating, debuting, and marketing groups. ==== Casting ==== While the majority of K-pop idols are from South Korea, some are from Japan, China, or Thailand. Many of Korea's entertainment companies, such as SM's Global Auditions, Bighit's Hit It auditions, and YG's Next Generation, host worldwide auditions. Scouting and streetcasting are also common, with members like BTS's Jin recruited for their looks or other surface reasons. Sometimes, casting agents go to dance schools to recruit the top dancers to be trained further at the entertainment company. ==== Training ==== Idols train extensively before debut. They receive training in dance, vocal activities, presentation, and other areas that will benefit them in the industry. Oftentimes, this training will last for years at a time, and trainees are in the proverbial dungeon. Before debut, idols and groups attempt to gain fans through pre-debut activities. SM Entertainment has a system in place called SM Rookies, which is a pre-debut team that hosts concerts and releases videos that strengthen the fanbase of the group even before their first single is released. Other forms of pre-debut activities include featuring in other, more seasoned idols' videos—like Nu'est in Orange Caramel or Exo in Girls' Generation-TTS Twinkle or BTS in Jo Kwon. One particular method of pre-debut training is coupled with casting in production shows, like Sixteen and Produce 101, in which members for a final group are selected and trained. ==== Producing ==== The production of music is integral in culture technology. For cultural technology, production of music helps create differentiated content to set trends in the K-pop world—trends that vary from music to also costume, choreography, and music videos. SM in particular focuses heavily on the expansion globally. Some companies also outsource production to more internationally famed parties, like Cube Entertainment's partnership with Skrillex for 4minute's Act. 7. ==== Marketing/Managing ==== In the marketing and management stage, talent agencies seek to broaden their reach. Often, idols have potential for being actors and actresses in dramas, or perhaps hosts/permanent members of variety shows like Kim Hee-chul in Knowing Bros. This so-called omnidirectional marketing lineup ranges over lifestyle and seeks to reach many aspects of living, like music, TV, drama, entertainment, sports, and fashion. This is also where older groups find new life, like Super Junior. Companies are not complacent but experiment constantly to develop the best marketing for the best management system. Marketing also aspires to branch out to international audiences, sometimes via the implementation of variety shows. Despite being primarily in Korean, these variety shows are accessible to all due to the simplistic, easily understood nature of shows—game-oriented shows like Run BTS! or consistently subbed shows like Weekly Idol are popular in showing the fun-loving side of idols. == Evolution into New Culture Technology == In February 2016, SM hosted a press conference discussing the future of SM and its cultural technology. Lee Soo-man announced the implementation of New Culture Technology, an SM-specific system. While SM's cultural technology in the past relied on local, Korean artists like Rain and BoA, the updated model tries to embed more and more foreign singers from strategic markets into larger girl or boy bands. These imported singers are then used to promote their acts back in their respective home countries. New Culture Technology is five projects—SM Station, EDM, Digital Platforms, Rookies Entertainment, and MCN—and one experimental group, NCT. It is a convergence and expansion of SM's four core culture technologies developed and deals heavily with interaction and the desire to innovate through communication. === SM Station === SM announced their intention of creating a new song every week for 52 weeks. Through this constant output of music, they intend to stray away from conventional forms of music and show active movement in digital music market and physical album market through freely and continuously releasing music. Additionally, this SM Station will feature collaborations between artists, producers, composers, and company brands outside the SM label. The name of SM Station is both derived from the radio station and the metaphorical train station. === NCT === Neo Culture Technology (NCT) introduced the idea of "Interactive". SM company tried to connect the targeting market, customers and artist, in order to lead the K-pop culture. NCT (Neo Culture Technology) is the new artist group formed by SM that embodies the concepts of cultural technology. With the seemingly limitless combinations and groups, SM aspires to make the whole world a stage for NCT. Since 2023, there are six NCT groups, who debuted on the digital song sales: NCT U, NCT 127, NCT Dream, WayV, NCT DoJaeJung, and NCT Wish. As of October 2023, the group consists of 25 members: Johnny, Taeyong, Yuta, Kun, Doyoung, Ten, Jaehyun, Winwin, Jungwoo, Mark, Xiaojun, Hendery, Renjun, Jeno, Haechan, Jaemin, Yangyang, Chenle, Jisung, Sion, Riku, Yushi, Daeyoung, Ryo, and Sakuya. ScreaM Records ScreaM Records has been released by SM Entertainment as an EDM label since 2016 for "SM TOWN: New Culture Technology". ScreaM Records is made for "performances made to be enjoyed". It collaborates with inside and outside Korean well-known EDM DJs. ScreaM Records has first launched collaborated song "Wave" E-Mart's home electronics store, Electro Mart. "Our goal is to provide opportunities to producers who have yet to be discovered and produce world famous DJs from the Asian scene." a ScreaM Records representative said. == Three stages of globalization == According to Lee, there are three stages necessary to popularize Korean culture outside South Korea: exporting the product, collaborating with international companies to expand the product's presence abroad, and finally creating a joint venture with international companies. As part of their joint ventures with international companies, South Korean talent agencies may hire foreign composers, producers, and choreographers to ensure K-pop songs feel "local" to foreign countries.
Read more →
GPU switching

GPU switching is a mechanism used on computers with multiple graphic controllers. This mechanism allows the user to either maximize the graphic performance or prolong battery life by switching between the graphic cards. It is mostly used on gaming laptops which usually have an integrated graphic device and a discrete video card. == Basic components == Most computers using this feature contain integrated graphics processors and dedicated graphics cards that applies to the following categories. === Integrated graphics === Also known as: Integrated graphics, shared graphics solutions, integrated graphics processors (IGP) or unified memory architecture (UMA). This kind of graphics processors usually have much fewer processing units and share the same memory with the CPU. Sometimes the graphics processors are integrated onto a motherboard. It is commonly known as: on-board graphics. A motherboard with on-board graphics processors doesn't require a discrete graphics card or a CPU with graphics processors to operate. === Dedicated graphics cards === Also known as: discrete graphics cards. Unlike integrated graphics, dedicated graphics cards have much more processing units and have its own RAM with much higher memory bandwidth. In some cases, a dedicated graphics chip can be integrated onto the motherboards, B150-GP104 for example. Regardless of the fact that the graphics chip is integrated, it is still counted as a dedicated graphics cards system because the graphics chip is integrated with its own memory. == Theory == Most Personal Computers have a motherboard that uses a Southbridge and Northbridge structure. === Northbridge control === The Northbridge is one of the core logic chipset that handles communications between the CPU, GPU, RAM and the Southbridge. The discrete graphics card is usually installed onto the graphics card slot such as PCI-Express and the integrated graphics is integrated onto the CPU itself or occasionally onto the Northbridge. The Northbridge is the most responsible for switching between GPUs. The way how it works usually has the following process (refer to the Figure 1. on the right): The Northbridge receives input from Southbridge through the internal bus. The Northbridge signals to CPU through the Front-side bus. The CPU runs the task assignment application (usually the graphics card driver) to determine which GPU core to use. The CPU passes down the command to the Northbridge. The Northbridge passes down the command to the according GPU core. The GPU core processes the command and returns the rendered data back to the Northbridge. The Northbridge sends the rendered data back to Southbridge. === Southbridge control === The Southbridge is a set of integrated circuits such Intel's I/O Controller Hub (ICH). It handles all of a computer's I/O functions, such as receiving the keyboard input and outputting the data onto the screen. The way how it usually works usually has two steps: Take in the user input and pass it down to the Northbridge. (Optional) Receive the rendered data from the Northbridge and output it. The reason why the second step can be optional is that sometimes the rendered the data is outputted directly from the discrete graphics card which is located on the graphics card slot so there is no need to output the data through the Southbridge. == Main purpose == GPU switching is mostly used for saving energy by switching between graphic cards. The dedicated graphics cards consume much more power than integrated graphics but also provides higher 3D performances, which is needed for a better gaming and CAD experience. Following is a list of the TDPs of the most popular CPU with integrated graphics and dedicated graphics cards. The dedicated graphics cards exhibit much higher power consumption than the integrated graphics on both platforms. Disabling them when no heavy graphics processing is needed can significantly lower the power consumption. == Technologies == === Nvidia Optimus === Nvidia Optimus™ is a computer GPU switching technology created by Nvidia that can dynamically and seamlessly switch between two graphic cards based on running programs. === AMD Enduro === AMD Enduro™ is a collective brand developed by AMD that features many new technologies that can significantly save power. It was previously named as: PowerXpress and Dynamic Switchable Graphics (DSG). This technology implements a sophisticated system to predict the potential usage need for graphics cards and switch between graphics cards based on predicted need. This technology also introduces a new power control plan that allows the discrete graphics cards consume no energy when idling. == Manufacturers == === Integrated graphics === In personal computers, the IGP (integrated graphics processors) are mostly manufactured by Intel and AMD and are integrated onto their CPUs. They are commonly known as: Intel HD and Iris Graphics - also called HD series and Iris series AMD Accelerated Processing Unit (APU) - also formerly known as: fusion === Dedicated graphics cards === The most popular dedicated graphics cards are manufactured by AMD and Nvidia. They are commonly known as: AMD Radeon Nvidia GeForce == Drivers and OS support == Most common operating systems have built-in support for this feature. However, the users may download the updated drivers from Nvidia or AMD for better experience. === Windows support === Windows 7 has built-in support for this feature. The system automatically switches between GPUs depending on the program that's running. However, the user may switch the GPUs manually through device manager or power manager. === Linux === Modern Linux systems handle hybrid graphics in two parts: power/control for the inactive GPU, and optional render offloading for individual applications. vga_switcheroo (in the kernel since 2.6.34) coordinates power and mux control on systems with multiple GPUs. It was designed primarily for muxed designs (hardware display switch), and on muxless laptops it is typically used only for power control. A display server restart is no longer required for offloading on muxless systems. DRI PRIME (Mesa) enables per-process render offload on muxless systems: an app renders on the discrete GPU and the integrated GPU presents the result. Users can opt in via the DRI_PRIME environment variable (e.g., DRI_PRIME=1) or desktop integration. On GNOME, the switcheroo-control service exposes the discrete GPU to the shell, adding a “Launch using Discrete Graphics Card” entry to app menus on supported systems (Wayland or Xorg), which invokes render offload under the hood. With the proprietary Nvidia driver, render offload is provided as PRIME Render Offload (supported since driver 435.xx). Distributions commonly ship a helper like prime-run or desktop menu entries that set the required environment for offloading. ==== Notes and limitations (Linux) ==== On muxless systems the internal display is hard-wired to the integrated GPU; the discrete GPU cannot directly drive that panel and instead renders offscreen for composition by the iGPU. External displays connected to the dGPU may allow direct output depending on the laptop’s wiring. Power-saving behavior varies by driver and distro defaults. Some setups need explicit configuration to power down the inactive GPU when idle. Desktop integrations (e.g., GNOME's menu item) simply opt an app into offload; they do not "auto-switch" the whole session. Users can still launch apps on either GPU as needed.
Read more →