AI Coding Unity

AI Coding Unity — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Open Cloud Computing Interface

  The Open Cloud Computing Interface (OCCI) is a set of specifications delivered through the Open Grid Forum, for cloud computing service providers. OCCI has a set of implementations that act as proofs of concept. It builds upon World Wide Web fundamentals by using the Representational State Transfer (REST) approach for interacting with services. == Scope == The aim of the Open Cloud Computing Interface is the development of an open specification and API for cloud offerings. The focus was on Infrastructure-as-a-Service (IaaS) based offerings but the interface can be extended to support Platform and Software as a Service offerings as well. IaaS is one of three primary segments of the cloud computing industry in which compute, storage and network resources are provided as services. The API is based on a review of existing service-provider functionality and a set of use cases contributed by the working group. OCCI is a boundary API that acts as a service front-end to an IaaS provider’s internal infrastructure management framework. OCCI provides commonly understood semantics, syntax and a means of management in the domain of consumer-to-provider IaaS. It covers management of the entire life-cycle of OCCI-defined model entities and is compatible with existing standards such as the Open Virtualization Format (OVF) and the Cloud Data Management Interface (CDMI). Notably, it serves as an integration point for standardization efforts including Distributed Management Task Force, Internet Engineering Task Force and the Storage Networking Industry Association. == Context == OCCI began in March 2009 and was initially led by RabbitMQ and the Complutense University of Madrid. Today, the working group has over 250 members and includes numerous individuals, industry and academic parties. The OCCI operates under the umbrella of the Open Grid Forum (OGF), using a wiki and a mailing list for collaboration. == Goals == Interoperability: allow different Cloud providers to work together without data schema/format translation, facade/proxying between APIs and understanding and/or dependency on multiple APIs Portability: no technical/vendor lock-in and enable services to move between providers allows clients to easily switch between providers based on business objectives (e.g., cost) with minimal technical costs, thus enabling and fostering competition. Integration: the specification can be implemented with both the latest infrastructures or legacy ones. Extensibility: thanks to the use of a meta-model and capabilities discovery features, an OCCI client is able to interact with any OCCI server using provider-specific OCCI extensions. == Specific Implementations == They implement specific extensions of OCCI for a particular service: IaaS, PaaS, brokering, etc. Several implementations have been announced or released. == Generic Implementations (frameworks) == Here are frameworks to build OCCI APIs. Complementing these are a variety of developer tools. == Alternatives == Alternative approaches include the use of the Cloud Infrastructure Management Interface (CIMI) and related standards set from DMTF and the Amazon Web Services interfaces from Amazon. (The latter have not been endorsed by any known Standards organization). OpenNebula conducted a survey of their users in which the results showed, 38% do not expose cloud APIs, their users only interface through the Sunstone GUI, 36% mostly use the Amazon Web Services API, and 26% mostly use the OpenNebula’s OCCI API or the OCCI API offered by rOCCI.

  Read more →
• 

  Consumer relationship system

  Consumer relationship systems (CRS) are specialized customer relationship management (CRM) software applications that are used to handle a company's dealings with its customers. Current consumer relationship systems integrate the software with telephone and call recording systems as well as with corporate systems for input and reporting. Customers can provide input from the company's website directly into the CRS. These systems are popular because they can deliver the 'voice of the consumer' that contributes to product quality improvement and that ultimately increases corporate profits. Consumer relationship systems that provide automated support as well as advanced systems may have artificial intelligence (AI) interfaces that can extract and analyse data collected, or handle basic questions and complaints. == History == The first CRS was developed in the 1980s. In 1981 Michael Wilke and Robert Thornton founded Wilke/Thornton, Inc in Columbus, Ohio, to develop new CRS software.

  Read more →
• 

  Frame (networking)

  A frame is a digital data transmission unit in computer networking and telecommunications. In packet switched systems, a frame is a simple container for a single network packet. In other telecommunications systems, a frame is a repeating structure supporting time-division multiplexing. A frame typically includes frame synchronization features consisting of a sequence of bits or symbols that indicate to the receiver the beginning and end of the payload data within the stream of symbols or bits it receives. If a receiver is connected to the system during frame transmission, it ignores the data until it detects a new frame synchronization sequence. == Packet switching == In the OSI model of computer networking, a frame is the protocol data unit at the data link layer. Frames are the result of the final layer of encapsulation before the data is transmitted over the physical layer. A frame is "the unit of transmission in a link layer protocol, and consists of a link layer header followed by a packet." Each frame is separated from the next by an interframe gap. A frame is a series of bits generally composed of frame synchronization bits, the packet payload, and a frame check sequence. Examples are Ethernet frames, Wi-Fi frames, 4G frames, Point-to-Point Protocol (PPP) frames, Fibre Channel frames, and V.42 modem frames. Often, frames of several different sizes are nested inside each other. For example, when using Point-to-Point Protocol (PPP) over asynchronous serial communication, the eight bits of each individual byte are framed by start and stop bits, the payload data bytes in a network packet are framed by the header and footer, and several packets can be framed with frame boundary octets. == Time-division multiplex == In telecommunications, specifically in time-division multiplex (TDM) and time-division multiple access (TDMA) variants, a frame is a cyclically repeated data block that consists of a fixed number of time slots, one for each logical TDM channel or TDMA transmitter. In this context, a frame is typically an entity at the physical layer. TDM application examples are SONET/SDH and the ISDN circuit-switched B-channel, while TDMA examples are Circuit Switched Data used in early cellular voice services. The frame is also an entity for time-division duplex, where the mobile terminal may transmit during some time slots and receive during others.

  Read more →
• 

  G.9970

  G.9970 (also known as G.hnta) is a Recommendation developed by ITU-T that describes the generic transport architecture for home networks and their interfaces to a provider's access network. G.9970 was developed by Study Group 15, Question 1. G.9970 received Consent on December 12, 2008 and was Approved on January 13, 2009. == Relationship with G.hn == G.9970 (G.hnta) and G.9960 (G.hn) are two ITU-T Recommendations that address home networking in a complementary manner. While G.9970 addresses layer 3 (network layer) of the home network architecture, G.9960 addresses layers 1 (physical layer) and 2 (data link layer).

  Read more →
• 

  Color science

  Color science is the scientific study of color including lighting and optics; measurement of light and color; the physiology, psychophysics, and modeling of color vision; and color reproduction. It is the modern extension of traditional color theory. == Organizations == International Commission on Illumination (CIE) Illuminating Engineering Society (IES) Inter-Society Color Council (ISCC) Society for Imaging Science and Technology (IS&T) International Colour Association (AIC) Optica, formerly the Optical Society of America (OSA) The Colour Group Society of Dyers and Colourists (SDC) American Association of Textile Chemists and Colorists (AATCC) Association for Research in Vision and Ophthalmology (ARVO) ACM SIGGRAPH Vision Sciences Society (VSS) Council for Optical Radiation Measurements (CORM) == Journals == The preeminent scholarly journal publishing research papers in color science is Color Research and Application, started in 1975 by founding editor-in-chief Fred Billmeyer, along with Gunter Wyszecki, Michael Pointer and Rolf Kuehni, as a successor to the Journal of Colour (1964–1974). Previously most color science work had been split between journals with broader or partially overlapping focus such as the Journal of the Optical Society of America (JOSA), Photographic Science and Engineering (1957–1984), and the Journal of the Society of Dyers and Colourists (renamed Coloration Technology in 2001). Other journals where color science papers are published include the Journal of Imaging Science & Technology, the Journal of Perceptual Imaging, the Journal of the International Colour Association (JAIC), the Journal of the Color Science Association of Japan, Applied Optics, and the Journal of Vision. == Conferences == Congress of the International Color Association IS&T Color and Imaging Conference (CIC) SIGGRAPH International Symposium for Color Science and Art == Selected books == Berns, Roy S. (2019). Billmeyer and Saltzman's Principles of Color Technology (4th ed.). Wiley. doi:10.1002/9781119367314. 3rd ed. (2000). Daw, Nigel (2012). How Vision Works: The Physiological Mechanisms Behind What We See. Oxford. doi:10.1093/acprof:oso/9780199751617.001.0001. Elliot, Andrew J.; Fairchild, Mark D.; Franklin, Anna, eds. (2015). Handbook of Color Psychology. Cambridge. doi:10.1017/CBO9781107337930. Fairchild, Mark D. (2013). Color Appearance Models (3rd ed.). Wiley. doi:10.1002/9781118653128. Author's website. 2nd ed. (2005). Hunt, Robert W. G. (2004). The Reproduction of Colour (6th ed.). Wiley. doi:10.1002/0470024275. Kuehni, Rolf G. (2012). Color: An Introduction to Practice and Principles (3rd ed.). Wiley. doi:10.1002/9781118533567. 1st ed. (1997). Luo, Ming R., ed. (2016). Encyclopedia of Color Science and Technology. Springer. doi:10.1007/978-1-4419-8071-7. MacAdam, David L., ed. (1970). Sources of Color Science. MIT Press. Reinhard, Erik; Khan, Erum Arif; Akyuz, Ahmet Oguz; Johnson, Garrett (2008). Color Imaging: Fundamentals and Applications. CRC Press. doi:10.1201/b10637. Schanda, János, ed. (2007). Colorimetry: Understanding the CIE System. Wiley. doi:10.1002/9780470175637. Shamey, Renzo; Kuehni, Rolf G. (2020). Pioneers of Color Science. Springer. doi:10.1007/978-3-319-30811-1. Wyszecki, Günter; Stiles, Walter S. (1982). Color Science: Concepts and Methods, Quantitative Data and Formulae (2nd ed.). Wiley.

  Read more →
• 

  InfiniBand

  InfiniBand (IB) is a computer networking standard used in high-performance computing that features very high throughput and very low latency. It is used for data interconnect both among and within computers. InfiniBand is also used as either a direct or switched interconnect between servers and storage systems, as well as an interconnect between storage systems. It is designed to be scalable and uses a switched fabric network topology. Between 2014 and June 2016, it was the most commonly used interconnect in the TOP500 list of supercomputers. Mellanox (acquired by Nvidia) manufactures InfiniBand host bus adapters and network switches, which are used by large computer system and database vendors in their product lines. As a computer cluster interconnect, IB competes with Ethernet, Fibre Channel, and Intel Omni-Path. The technology is promoted by the InfiniBand Trade Association. == History == InfiniBand originated in 1999 from the merger of two competing designs: Future I/O and Next Generation I/O (NGIO). NGIO was led by Intel, with a specification released in 1998, and joined by Sun Microsystems and Dell. Future I/O was backed by Compaq, IBM, and Hewlett-Packard. This led to the formation of the InfiniBand Trade Association (IBTA), which included both sets of hardware vendors as well as software vendors such as Microsoft. At the time it was thought some of the more powerful computers were approaching the interconnect bottleneck of the PCI bus, in spite of upgrades like PCI-X. Version 1.0 of the InfiniBand Architecture Specification was released in 2000. Initially the IBTA vision for IB was simultaneously a replacement for PCI in I/O, Ethernet in the machine room, cluster interconnect and Fibre Channel. IBTA also envisaged decomposing server hardware on an IB fabric. Mellanox had been founded in 1999 to develop NGIO technology, but by 2001 shipped an InfiniBand product line called InfiniBridge at 10 Gbit/second speeds. Following the burst of the dot-com bubble there was hesitation in the industry to invest in such a far-reaching technology jump. By 2002, Intel announced that instead of shipping IB integrated circuits ("chips"), it would focus on developing PCI Express, and Microsoft discontinued IB development in favor of extending Ethernet. Sun Microsystems and Hitachi continued to support IB. In 2003, the System X supercomputer built at Virginia Tech used InfiniBand in what was estimated to be the third largest computer in the world at the time. The OpenIB Alliance (later renamed OpenFabrics Alliance) was founded in 2004 to develop an open set of software for the Linux kernel. By February, 2005, the support was accepted into the 2.6.11 Linux kernel. In November 2005 storage devices finally were released using InfiniBand from vendors such as Engenio. Cisco, desiring to keep technology superior to Ethernet off the market, adopted a "buy to kill" strategy. Cisco successfully killed InfiniBand switching companies such as Topspin via acquisition. Of the top 500 supercomputers in 2009, Gigabit Ethernet was the internal interconnect technology in 259 installations, compared with 181 using InfiniBand. In 2010, market leaders Mellanox and Voltaire merged, leaving just one other IB vendor, QLogic, primarily a Fibre Channel vendor. At the 2011 International Supercomputing Conference, links running at about 56 gigabits per second (known as FDR, see below), were announced and demonstrated by connecting booths in the trade show. In 2012, Intel acquired QLogic's InfiniBand technology, leaving only one independent supplier. By 2014, InfiniBand was the most popular internal connection technology for supercomputers, although within two years, 10 Gigabit Ethernet started displacing it. In 2016, it was reported that Oracle Corporation (an investor in Mellanox) might engineer its own InfiniBand hardware. In 2019 Nvidia acquired Mellanox, the last independent supplier of InfiniBand products. == Specification == Specifications are published by the InfiniBand trade association. === Performance === Original names for speeds were single-data rate (SDR), double-data rate (DDR) and quad-data rate (QDR) as given below. Subsequently, other three-letter initialisms were added for even higher data rates. Notes Each link is duplex. Links can be aggregated: most systems use a 4 link/lane connector (QSFP). HDR often makes use of 2x links (aka HDR100, 100 Gb link using 2 lanes of HDR, while still using a QSFP connector). NDR introduced OSFP connectors which host one or two links at 2x (NDR200) or 4x (NDR400). They are not logically configured as a single 8x link, even when connecting switches together with an OSFP cable. InfiniBand provides remote direct memory access (RDMA) capabilities for low CPU overhead. === Topology === InfiniBand uses a switched fabric topology, as opposed to early shared medium Ethernet. All transmissions begin or end at a channel adapter. Each processor contains a host channel adapter (HCA) and each peripheral has a target channel adapter (TCA). These adapters can also exchange information for security or quality of service (QoS). === Messages === InfiniBand transmits data in packets of up to 4 KB that are taken together to form a message. A message can be: a remote direct memory access read or write a channel send or receive a transaction-based operation (that can be reversed) a multicast transmission an atomic operation === Physical interconnection === In addition to a board form factor connection, it can use both active and passive copper (up to 10 meters) and optical fiber cable (up to 10 km). QSFP connectors are used. The InfiniBand Association also specified the CXP connector system for speeds up to 120 Gbit/s over copper, active optical cables, and optical transceivers using parallel multi-mode fiber cables with 24-fiber MPO connectors. === Software interfaces === Mellanox operating system support is available for Solaris, FreeBSD, Red Hat Enterprise Linux, SUSE Linux Enterprise Server (SLES), Windows, HP-UX, VMware ESX, and AIX. InfiniBand has no specific standard application programming interface (API). The standard only lists a set of verbs such as ibv_open_device or ibv_post_send, which are abstract representations of functions or methods that must exist. The syntax of these functions is left to the vendors. Sometimes for reference this is called the verbs API. The de facto standard software is developed by OpenFabrics Alliance and called the Open Fabrics Enterprise Distribution (OFED). It is released under two licenses GPL2 or BSD license for Linux and FreeBSD, and as Mellanox OFED for Windows (product names: WinOF / WinOF-2; attributed as host controller driver for matching specific ConnectX 3 to 5 devices) under a choice of BSD license for Windows. It has been adopted by most of the InfiniBand vendors, for Linux, FreeBSD, and Microsoft Windows. IBM refers to a software library called libibverbs, for its AIX operating system, as well as "AIX InfiniBand verbs". The Linux kernel support was integrated in 2005 into the kernel version 2.6.11. === Ethernet over InfiniBand === Ethernet over InfiniBand, abbreviated to EoIB, is an Ethernet implementation over the InfiniBand protocol and connector technology. EoIB enables multiple Ethernet bandwidths varying on the InfiniBand (IB) version. Ethernet's implementation of the Internet Protocol Suite, usually referred to as TCP/IP, is different in some details compared to the direct InfiniBand protocol in IP over IB (IPoIB).

  Read more →
• 

  Bitmap index

  A bitmap index is a special kind of database index that uses bitmaps. Bitmap indexes have traditionally been considered to work well for low-cardinality columns, which have a modest number of distinct values, either absolutely, or relative to the number of records that contain the data. The extreme case of low cardinality is Boolean data (e.g., does a resident in a city have internet access?), which has two values, True and False. Bitmap indexes use bit arrays (commonly called bitmaps) and answer queries by performing bitwise logical operations on these bitmaps. Bitmap indexes have a significant space and performance advantage over other structures for query of such data. Their drawback is they are less efficient than the traditional B-tree indexes for columns whose data is frequently updated: consequently, they are more often employed in read-only systems that are specialized for fast query - e.g., data warehouses, and generally unsuitable for online transaction processing applications. Some researchers argue that bitmap indexes are also useful for moderate or even high-cardinality data (e.g., unique-valued data) which is accessed in a read-only manner, and queries access multiple bitmap-indexed columns using the AND, OR or XOR operators extensively. Bitmap indexes are also useful in data warehousing applications for joining a large fact table to smaller dimension tables such as those arranged in a star schema. == Example == Continuing the internet access example, a bitmap index may be logically viewed as follows: On the left, Identifier refers to the unique number assigned to each resident, HasInternet is the data to be indexed, the content of the bitmap index is shown as two columns under the heading bitmaps. Each column in the left illustration under the Bitmaps header is a bitmap in the bitmap index. In this case, there are two such bitmaps, one for "has internet" Yes and one for "has internet" No. It is easy to see that each bit in bitmap Y shows whether a particular row refers to a person who has internet access. This is the simplest form of bitmap index. Most columns will have more distinct values. For example, the sales amount is likely to have a much larger number of distinct values. Variations on the bitmap index can effectively index this data as well. We briefly review three such variations. Note: Many of the references cited here are reviewed at (John Wu (2007)). For those who might be interested in experimenting with some of the ideas mentioned here, many of them are implemented in open source software such as FastBit, the Lemur Bitmap Index C++ Library, the Roaring Bitmap Java library and the Apache Hive Data Warehouse system. == Compression == For historical reasons, bitmap compression and inverted list compression were developed as separate lines of research, and only later were recognized as solving essentially the same problem. Software can compress each bitmap in a bitmap index to save space. There has been considerable amount of work on this subject. Though there are exceptions such as Roaring bitmaps, Bitmap compression algorithms typically employ run-length encoding, such as the Byte-aligned Bitmap Code, the Word-Aligned Hybrid code, the Partitioned Word-Aligned Hybrid (PWAH) compression, the Position List Word Aligned Hybrid, the Compressed Adaptive Index (COMPAX), Enhanced Word-Aligned Hybrid (EWAH) and the COmpressed 'N' Composable Integer SEt (CONCISE). These compression methods require very little effort to compress and decompress. More importantly, bitmaps compressed with BBC, WAH, COMPAX, PLWAH, EWAH and CONCISE can directly participate in bitwise operations without decompression. This gives them considerable advantages over generic compression techniques such as LZ77. BBC compression and its derivatives are used in a commercial database management system. BBC is effective in both reducing index sizes and maintaining query performance. BBC encodes the bitmaps in bytes, while WAH encodes in words, better matching current CPUs. "On both synthetic data and real application data, the new word aligned schemes use only 50% more space, but perform logical operations on compressed data 12 times faster than BBC." PLWAH bitmaps were reported to take 50% of the storage space consumed by WAH bitmaps and offer up to 20% faster performance on logical operations. Similar considerations can be done for CONCISE and Enhanced Word-Aligned Hybrid. The performance of schemes such as BBC, WAH, PLWAH, EWAH, COMPAX and CONCISE is dependent on the order of the rows. A simple lexicographical sort can divide the index size by 9 and make indexes several times faster. The larger the table, the more important it is to sort the rows. Reshuffling techniques have also been proposed to achieve the same results of sorting when indexing streaming data. == Encoding == Basic bitmap indexes use one bitmap for each distinct value. It is possible to reduce the number of bitmaps used by using a different encoding method. For example, it is possible to encode C distinct values using log(C) bitmaps with binary encoding. This reduces the number of bitmaps, further saving space, but to answer any query, most of the bitmaps have to be accessed. This makes it potentially not as effective as scanning a vertical projection of the base data, also known as a materialized view or projection index. Finding the optimal encoding method that balances (arbitrary) query performance, index size and index maintenance remains a challenge. Without considering compression, Chan and Ioannidis analyzed a class of multi-component encoding methods and came to the conclusion that two-component encoding sits at the kink of the performance vs. index size curve and therefore represents the best trade-off between index size and query performance. == Binning == For high-cardinality columns, it is useful to bin the values, where each bin covers multiple values and build the bitmaps to represent the values in each bin. This approach reduces the number of bitmaps used regardless of encoding method. However, binned indexes can only answer some queries without examining the base data. For example, if a bin covers the range from 0.1 to 0.2, then when the user asks for all values less than 0.15, all rows that fall in the bin are possible hits and have to be checked to verify whether they are actually less than 0.15. The process of checking the base data is known as the candidate check. In most cases, the time used by the candidate check is significantly longer than the time needed to work with the bitmap index. Therefore, binned indexes exhibit irregular performance. They can be very fast for some queries, but much slower if the query does not exactly match a bin. == History == The concept of bitmap index was first introduced by Professor Israel Spiegler and Rafi Maayan in their research "Storage and Retrieval Considerations of Binary Data Bases", published in 1985. The first commercial database product to implement a bitmap index was Computer Corporation of America's Model 204. Patrick O'Neil published a paper about this implementation in 1987. This implementation is a hybrid between the basic bitmap index (without compression) and the list of Row Identifiers (RID-list). Overall, the index is organized as a B+tree. When the column cardinality is low, each leaf node of the B-tree would contain long list of RIDs. In this case, it requires less space to represent the RID-lists as bitmaps. Since each bitmap represents one distinct value, this is the basic bitmap index. As the column cardinality increases, each bitmap becomes sparse and it may take more disk space to store the bitmaps than to store the same content as RID-lists. In this case, it switches to use the RID-lists, which makes it a B+tree index. == In-memory bitmaps == One of the strongest reasons for using bitmap indexes is that the intermediate results produced from them are also bitmaps and can be efficiently reused in further operations to answer more complex queries. Many programming languages support this as a bit array data structure. For example, Java has the BitSet class and .NET have the BitArray class. Some database systems that do not offer persistent bitmap indexes use bitmaps internally to speed up query processing. For example, PostgreSQL versions 8.1 and later implement a "bitmap index scan" optimization to speed up arbitrarily complex logical operations between available indexes on a single table. For tables with many columns, the total number of distinct indexes to satisfy all possible queries (with equality filtering conditions on either of the fields) grows very fast, being defined by this formula: C n [ n 2 ] ≡ n ! ( n − [ n 2 ] ) ! [ n 2 ] ! {\displaystyle \mathbf {C} _{n}^{\left[{\frac {n}{2}}\right]}\equiv {\frac {n!}{\left(n-\left[{\frac {n}{2}}\right]\right)!\left[{\frac {n}{2}}\right]!}}} . A bitmap index scan combines expressions on different indexes, thus requiring only one index per column t

  Read more →
• 

  Viber

  Rakuten Viber, commonly known as Viber, is a cross-platform voice over IP (VoIP) and instant messaging (IM) software application owned by the Japanese technology company Rakuten Group. The service is available as freeware for Android, iOS, Microsoft Windows, macOS and Linux. Users are registered and identified through a mobile phone number, although the service can also be accessed on desktop platforms without mobile connectivity. In addition to instant messaging, the platform allows users to exchange media such as images, videos and files, and provides a paid international calling service called Viber Out. The software was launched in 2010 by the company Viber Media, founded by Talmon Marco and Igor Magazinnik. Rakuten acquired Viber Media in 2014 and later renamed the company Rakuten Viber. The company is headquartered in Cyprus and maintains offices in London, Manila, Paris, San Francisco, Singapore, Tokyo and Beijing. == History == === Founding (2010) === Viber Media was founded in Tel Aviv, Israel, in 2010 by Talmon Marco and Igor Magazinnik. Marco and Magazinnik are also co-founders of the peer-to-peer media and file-sharing client iMesh. The company was run from Israel and was registered in Cyprus. Sani Maroli and Ofer Smocha soon joined the company as well. Marco said Viber allows instant calling and synchronization with contacts because the ID is the user's cell number. In its early days, Viber relied on a patchwork of outsourcing partners from different countries, commissioning specific solutions from external vendors — including teams based in Cyprus and Belarus. According to the company's statements, development of Viber's core functionality historically originated from its Tel Aviv office — a testament to its roots — even though the legal entity was registered elsewhere. === Early monetisation (2011) === In its first two years of availability, Viber did not generate revenues. It began doing so in 2013, via user payments for Viber Out voice calling and the Viber graphical messaging "sticker market". The company was originally funded by individual investors, described by Marco as "friends and family". They invested $20 million in the company, which had 120 employees as of May 2013. On 24 July 2013, Viber's support system was defaced by the Syrian Electronic Army. According to Viber, no sensitive user information was accessed. By the time Rakuten came forward with its acquisition deal in 2014, Viber had already stopped working with external vendors, choosing instead to consolidate development under its own offices. === Rakuten acquires Viber (2014) === On 13 February 2014, Rakuten announced they had acquired Viber Media for $900 million, and since then Viber has been owned by Rakuten, Inc., an e-commerce conglomerate headquartered in Tokyo. The sale of Viber earned the Shabtai family (Benny, his brother Gilad, and Gilad's son Ofer) some $500 million from their 55.2% stake in the company. At that sale price, the founders each realized over 30 times return on their investments. Later that year, the company established a UK presence with the incorporation of Viber UK Limited in London. Djamel Agaoua became Viber Media CEO in February 2017, replacing co-founder Marco who left in 2015. In July 2017 the corporate name of Viber Media was changed to Rakuten Viber and a new wordmark logo was introduced. Its legal name remains Viber Media, S.à r.l. based in Luxembourg. === Post-acquisition === In August 2015 Viber opened a regional office for Central and Eastern Europe in Sofia to support growth in the region. In 2017, Rakuten Viber and the World Wildlife Fund engaged in a commercial transaction aimed at raising awareness and protecting wildlife. After first using Viber to spread its message in June 2020, the International Federation of the Red Cross launched an official chatbot and community on the messaging app to combat the spread of false information, which they termed an infodemic, about COVID-19. The chatbot is still active as of June 2022, with over 1.4 million subscribers. In 2020, Rakuten Viber and the World Health Organization (the WHO) engaged in a commercial transaction for a chatbot to inform users of issues such as women's health. and an anti-smoking campaign. In the wake of the July–August 2020 Belarusian election protests, to avoid sanctions and harassment from monopolies the company closed its office in Minsk. In 2022, Ofir Eyal became Viber CEO, replacing Djamel Agaoua. Eyal is a Viber veteran; he worked as Vice President of Product in 2014 before his promotion to Chief Operating Officer in 2019. Shortly after the appointment of a new CEO, Viber continued its international expansion. In March 2022, Rakuten announced the opening of a development center in Tbilisi, Georgia, intended to support work on mobile applications and technology projects in the region. In July 2022, Rakuten Viber partnered with Rapyd to launch instant cross-border P2P payments. The company launched payments on the Viber app first in Greece and Germany, and then in other countries. In August, Mineski teamed up with Viber to develop a social minigame platform that can play off Viber's application. In May 2022, Rakuten Viber launched the premium chat service Viber Plus that offers exclusive features, including sticker market privileges, ad-free use, priority Viber support, exclusive badge, unique Viber icon, large file sharing, and more. In 2022, Viber joined the European Union’s Code of Conduct on countering illegal hate speech online. As part of this framework, the company undertook to review reported content and remove material identified as hate speech in accordance with the Code and its platform rules. In January 2024 Rakuten (the company behind Viber) established an office in Kyiv to bring together engineering and marketing departments. Alongside launching its Kyiv office the company joined Diia.City as a resident. Subsequently in October 2024 Rakuten Viber inaugurated an office in Manila to broaden its operations, in the Philippines. The company’s legal entity remains Viber Media S.à r.l., registered in Luxembourg. Viber’s engineering work has been carried out across multiple countries and through external partners, including outsourcing and near-shore vendors. As a result, its development operations are distributed internationally rather than concentrated in a single location. In December 2024, Viber was blocked in Russia. Roskomnadzor announced the nationwide blocking of the messaging app due to non-compliance with local legal requirements. == Security audit == On 4 November 2014, Viber scored 1 out of 7 points on the Electronic Frontier Foundation's "Secure Messaging Scorecard". Viber received a point for encryption during transit but lost points because communications were not encrypted with keys that the provider did not have access to (i.e. the communications were not end-to-end encrypted), users could not verify contacts' identities, past messages were not secure if the encryption keys were stolen (i.e. the service did not provide forward secrecy), the code was not open to independent review (i.e. the code was not open-source), the security design was not properly documented, and there had not been a recent independent security audit. On 14 November 2014, the EFF changed Viber's score to 2 out of 7 after it had received an external security audit from Ernst & Young's Advanced Security Centre. On 19 April 2016, with the announcement of Viber version 6.0, Rakuten added end-to-end encryption to their service. The company said that the encryption protocol had only been audited internally, and promised to commission external audits "in the coming weeks". In May 2016, Viber published an overview of their encryption protocol, saying that it is a custom implementation that "uses the same concepts" as the Signal Protocol. In 2022, Rakuten Viber won a Security Award, by test.de, a tech firm based in Germany where there are over 3 million Viber users. In 2024, Rakuten Viber received SOC certification following an audit conducted by Ernst & Young. The certification relates to the company’s controls for data protection and information security. == Market share == As of December 2016, Viber had 800 million registered users. According to Statista, there are 260 million monthly active users as of January 2019. The Viber messenger is very popular in the Philippines, Greece, Eastern Europe, Russia, the Middle East, and some Asian markets. India was the largest market for Viber as of December 2014 with 33 million registered users, the fifth most popular instant messenger in the country. At the same time there were 30 million users in the United States, 28 million in Russia and 18 million in Brazil. Viber is particularly popular in Eastern Europe, being the most downloaded messaging app on Android in Belarus, Moldova and Ukraine as of 2016. It is also popular in Iraq, Libya and Nepal. Viber is translated in 44 languages and used in more than 190 co

  Read more →
• 

  Hexagonal sampling

  A multidimensional signal is a function of M independent variables where M ≥ 2 {\displaystyle M\geq 2} . Real world signals, which are generally continuous time signals, have to be discretized (sampled) in order to ensure that digital systems can be used to process the signals. It is during this process of discretization where sampling comes into picture. Although there are many ways of obtaining a discrete representation of a continuous time signal, periodic sampling is by far the simplest scheme. Theoretically, sampling can be performed with respect to any set of points. But practically, sampling is carried out with respect to a set of points that have a certain algebraic structure. Such structures are called lattices. Mathematically, the process of sampling an N {\displaystyle N} -dimensional signal can be written as: w ( t ^ ) = w ( V . n ^ ) {\displaystyle w({\hat {t}})=w(V.{\hat {n}})} where t ^ {\displaystyle {\hat {t}}} is continuous domain M-dimensional vector (M-D) that is being sampled, n ^ {\displaystyle {\hat {n}}} is an M-dimensional integer vector corresponding to indices of a sample, and V is an N × N {\displaystyle N\times N} sampling matrix. == Motivation == Multidimensional sampling provides the opportunity to look at digital methods to process signals. Some of the advantages of processing signals in the digital domain include flexibility via programmable DSP operations, signal storage without the loss of fidelity, opportunity for encryption in communication, lower sensitivity to hardware tolerances. Thus, digital methods are simultaneously both powerful and flexible. In many applications, they act as less expensive alternatives to their analog counterparts. Sometimes, the algorithms implemented using digital hardware are so complex that they have no analog counterparts. Multidimensional digital signal processing deals with processing signals represented as multidimensional arrays such as 2-D sequences or sampled images.[1] Processing these signals in the digital domain permits the use of digital hardware where in signal processing operations are specified by algorithms. As real world signals are continuous time signals, multidimensional sampling plays a crucial role in discretizing the real world signals. The discrete time signals are in turn processed using digital hardware to extract information from the signal. == Preliminaries == === Region of Support === The region outside of which the samples of the signal take zero values is known as the Region of support (ROS). From the definition, it is clear that the region of support of a signal is not unique. === Fourier transform === The Fourier transform is a tool that allows us to simplify mathematical operations performed on the signal. The transform basically represents any signal as a weighted combination of sinusoids. The Fourier and the inverse Fourier transform of an M-dimensional signal can be defined as follows: X a ( Ω ^ ) = ∫ − ∞ + ∞ x a ( t ^ ) e − j Ω ^ T t ^ d t ^ {\displaystyle X_{a}({\hat {\Omega }})=\int _{-\infty }^{+\infty }\!x_{a}({\hat {t}})e^{-j{\hat {\Omega }}^{T}{\hat {t}}}d{\hat {t}}} x a ( t ^ ) = 1 2 π M ∫ − ∞ + ∞ X ( Ω ^ ) e ( j Ω ^ T t ^ ) d Ω ^ {\displaystyle x_{a}({\hat {t}})={\frac {1}{2\pi ^{M}}}\int _{-\infty }^{+\infty }\!X({\hat {\Omega }})e^{(j{\hat {\Omega }}^{T}{\hat {t}})}\,\mathrm {d} {\hat {\Omega }}} The cap symbol ^ indicates that the operation is performed on vectors. The Fourier transform of the sampled signal is observed to be a periodic extension of the continuous time Fourier transform of the signal. This is mathematically represented as: X ( ω ) = 1 | d e t ( V ) | ∑ k X a ( Ω ^ − U k ) {\displaystyle X(\omega )={\frac {1}{|det(V)|}}\sum _{k}\!X_{a}({\hat {\Omega }}-Uk)} where ω = V ~ Ω {\displaystyle \omega ={\tilde {V}}\Omega } and U = 2 π V ~ {\displaystyle U=2\pi {\tilde {V}}} is the periodicity matrix where ~ denotes matrix transposition. Thus sampling in the spatial domain results in periodicity in the Fourier domain. === Aliasing === A band limited signal may be periodically replicated in many ways. If the replication results in an overlap between replicated regions, the signal suffers from aliasing. Under such conditions, a continuous time signal cannot be perfectly recovered from its samples. Thus in order to ensure perfect recovery of the continuous signal, there must be zero overlap multidimensional sampling of the replicated regions in the transformed domain. As in the case of 1-dimensional signals, aliasing can be prevented if the continuous time signal is sampled at an adequate sufficiently high rate. === Sampling density === It is a measure of the number of samples per unit area. It is defined as: S . D = 1 | d e t ( V ) | = | d e t ( U ) | 4 π 2 {\displaystyle S.D={\frac {1}{|det(V)|}}={\frac {|det(U)|}{4\pi ^{2}}}} . The minimum number of samples per unit area required to completely recover the continuous time signal is termed as optimal sampling density. In applications where memory or processing time are limited, emphasis must be given to minimizing the number of samples required to represent the signal completely. == Existing approaches == For a bandlimited waveform, there are infinitely many ways the signal can be sampled without producing aliases in the Fourier domain. But only two strategies are commonly used: rectangular sampling and hexagonal sampling. === Rectangular and Hexagonal sampling === In rectangular sampling, a 2-dimensional signal, for example, is sampled according to the following V matrix: V r e c t = [ T 1 0 0 T 2 ] {\displaystyle V_{rect}={\begin{bmatrix}T1&0\\0&T2\end{bmatrix}}} where T1 and T2 are the sampling periods along the horizontal and vertical direction respectively. In hexagonal sampling, the V matrix assumes the following general form: V h e x = [ T 1 T 1 − T 2 T 2 ] {\displaystyle V_{hex}={\begin{bmatrix}T1&T1\\-T2&T2\end{bmatrix}}} The difference in the efficiency of the two schemes is highlighted using a bandlimited signal with a circular region of support of radius R. The circle can be inscribed in a square of length 2R or a regular hexagon of length 2 R 3 {\displaystyle {\frac {2R}{\sqrt {3}}}} . Consequently, the region of support is now transformed into a square and a hexagon respectively. If these regions are periodically replicated in the frequency domain such that there is zero overlap between any two regions, then by periodically replicating the square region of support, we effectively sample the continuous signal on a rectangular lattice. Similarly periodic replication of the hexagonal region of support maps to sampling the continuous signal on a hexagonal lattice. From U, the periodicity matrix, we can calculate the optimal sampling density for both the rectangular and hexagonal schemes. It is found that in order to completely recover the circularly band-limited signal, the hexagonal sampling scheme requires 13.4% fewer samples than the rectangular sampling scheme. The reduction may appear to be of little significance for a 2-dimensional signal. But as the dimensionality of the signal increases, the efficiency of the hexagonal sampling scheme will become far more evident. For instance, the reduction achieved for an 8-dimensional signal is 93.8%. To highlight the importance of the obtained result [2], try and visualize an image as a collection of infinite number of samples. The primary entity responsible for vision, i.e. the photoreceptors (rods and cones) are present on the retina of all mammals. These cells are not arranged in rows and columns. By adapting a hexagonal sampling scheme, our eyes are able to process images much more efficiently. The importance of hexagonal sampling lies in the fact that the photoreceptors of the human vision system lie on a hexagonal sampling lattice and, thus, perform hexagonal sampling.[3] In fact, it can be shown that the hexagonal sampling scheme is the optimal sampling scheme for a circularly band-limited signal. == Applications == === Aliasing effects minimized by the use of optimal sampling grids === Recent advances in the CCD technology has made hexagonal sampling feasible for real life applications. Historically, because of technology constraints, detector arrays were implemented only on 2-dimensional rectangular sampling lattices with rectangular shape detectors. But the super [CCD] detector introduced by Fuji has an octagonal shaped pixel in a hexagonal grid. Theoretically, the performance of the detector was greatly increased by introducing an octagonal pixel. The number of pixels required to represent the sample was reduced and there was significant improvement in the Signal-to-Noise Ratio (SNR) when compared with that of a rectangular pixel. But the drawback of using hexagonal pixels is that the associated fill factor will be less than 82%. An alternative method would be to interpolate hexagonal pixels in such a manner that we ultimately end up with a rectangular grid. The Spot 5 satellite incorporates a

  Read more →
• 

  Reverse proxy

  In computer networks, a reverse proxy or surrogate server is a proxy server that appears to any client to be an ordinary web server, but in reality merely acts as an intermediary that forwards the client's requests to one or more ordinary web servers. Reverse proxies help increase scalability, performance, resilience, and security, but they also carry a number of risks. Companies that run web servers often set up reverse proxies to facilitate the communication between an Internet user's browser and the web servers. An important advantage of doing so is that the web servers can be hidden behind a firewall on a company-internal network, and only the reverse proxy needs to be directly exposed to the Internet. Reverse proxy servers are implemented in popular open-source web servers. Dedicated reverse proxy servers are used by some of the biggest websites on the Internet. A reverse proxy is capable of tracking IP addresses of requests that are relayed through it as well as reading and/or modifying any non-encrypted traffic. However, this implies that anyone who has compromised the server could do so as well. Reverse proxies differ from forward proxies, which are used when the client is restricted to a private, internal network and asks a forward proxy to retrieve resources from the public Internet. == Uses == Large websites and content delivery networks use reverse proxies, together with other techniques, to balance the load between internal servers. Reverse proxies can keep a cache of static content, which further reduces the load on these internal servers and the internal network. It is also common for reverse proxies to add features such as compression or TLS encryption to the communication channel between the client and the reverse proxy. Reverse proxies can inspect HTTP headers, which, for example, allows them to present a single IP address to the Internet while relaying requests to different internal servers based on the URL of the HTTP request. Reverse proxies can hide the existence and characteristics of origin servers. This can make it more difficult to determine the actual location of the origin server / website and, for instance, more challenging to initiate legal action such as takedowns or block access to the website, as the IP address of the website may not be immediately apparent. Additionally, the reverse proxy may be located in a different jurisdiction with different legal requirements, further complicating the takedown process. Application firewall features can protect against common web-based attacks, like a denial-of-service attack (DoS) or distributed denial-of-service attacks (DDoS). Without a reverse proxy, removing malware or initiating takedowns (while simultaneously dealing with the attack) on one's own site, for example, can be difficult. In the case of secure websites, a web server may not perform TLS encryption itself, but instead offload the task to a reverse proxy that may be equipped with TLS acceleration hardware. (See TLS termination proxy.) A reverse proxy can distribute the load from incoming requests to several servers, with each server supporting its own application area. In the case of reverse proxying web servers, the reverse proxy may have to rewrite the URL in each incoming request in order to match the relevant internal location of the requested resource. A reverse proxy can reduce load on its origin servers by caching static content and dynamic content, known as web acceleration. Proxy caches of this sort can often satisfy a considerable number of website requests, greatly reducing the load on the origin server(s). A reverse proxy can optimize content by compressing it in order to speed up loading times. In a technique named "spoon-feeding", a dynamically generated page can be produced in its entirety and served to the reverse proxy, which can feed the page to the client as the connection allows. The program that generates the page need not remain open, thus releasing server resources during the possibly extended time the client requires to complete the transfer. Reverse proxies can operate wherever multiple web-servers must be accessible via a single public IP address. The web servers listen on different ports in the same machine, with the same local IP address or, possibly, on different machines with different local IP addresses. The reverse proxy analyzes each incoming request and delivers it to the right server within the local area network. Reverse proxies can perform A/B testing and multivariate testing without requiring application code to handle the logic of which version is served to a client. A reverse proxy can add access authentication to a web server that does not have any authentication. == Risks == When the transit traffic is encrypted and the reverse proxy needs to filter/cache/compress or otherwise modify or improve the traffic, the proxy first must decrypt and re-encrypt communications. This requires the proxy to possess the TLS certificate and its corresponding private key, extending the number of systems that can have access to non-encrypted data and making it a more valuable target for attackers. The vast majority of external data breaches happen either when hackers succeed in abusing an existing reverse proxy that was intentionally deployed by an organization, or when hackers succeed in converting an existing Internet-facing server into a reverse proxy server. Compromised or converted systems allow external attackers to specify where they want their attacks proxied to, enabling their access to internal networks and systems. Applications that were developed for the internal use of a company are not typically hardened to public standards and are not necessarily designed to withstand all hacking attempts. When an organization allows external access to such internal applications via a reverse proxy, they might unintentionally increase their own attack surface and invite hackers. If a reverse proxy is not configured to filter attacks or it does not receive daily updates to keep its attack signature database up to date, a zero-day vulnerability can pass through unfiltered, enabling attackers to gain control of the system(s) that are behind the reverse proxy server. Giving the reverse proxy of a third party access to private keys (for caching or optimizing content) places the entire triad of confidentiality, integrity and availability in the hands of the third party who operates the proxy. A reverse proxy is a single point of failure for the back-end services it fronts: an outage caused by misconfiguration, a denial-of-service attack, or a software fault can make every fronted service unreachable to outside clients, even when the back-end services themselves remain healthy. For example, a 2020 outage at Cloudflare briefly took down major sites and services that relied on its reverse-proxy edge, including Discord.

  Read more →
• 

  Bitmap index

  A bitmap index is a special kind of database index that uses bitmaps. Bitmap indexes have traditionally been considered to work well for low-cardinality columns, which have a modest number of distinct values, either absolutely, or relative to the number of records that contain the data. The extreme case of low cardinality is Boolean data (e.g., does a resident in a city have internet access?), which has two values, True and False. Bitmap indexes use bit arrays (commonly called bitmaps) and answer queries by performing bitwise logical operations on these bitmaps. Bitmap indexes have a significant space and performance advantage over other structures for query of such data. Their drawback is they are less efficient than the traditional B-tree indexes for columns whose data is frequently updated: consequently, they are more often employed in read-only systems that are specialized for fast query - e.g., data warehouses, and generally unsuitable for online transaction processing applications. Some researchers argue that bitmap indexes are also useful for moderate or even high-cardinality data (e.g., unique-valued data) which is accessed in a read-only manner, and queries access multiple bitmap-indexed columns using the AND, OR or XOR operators extensively. Bitmap indexes are also useful in data warehousing applications for joining a large fact table to smaller dimension tables such as those arranged in a star schema. == Example == Continuing the internet access example, a bitmap index may be logically viewed as follows: On the left, Identifier refers to the unique number assigned to each resident, HasInternet is the data to be indexed, the content of the bitmap index is shown as two columns under the heading bitmaps. Each column in the left illustration under the Bitmaps header is a bitmap in the bitmap index. In this case, there are two such bitmaps, one for "has internet" Yes and one for "has internet" No. It is easy to see that each bit in bitmap Y shows whether a particular row refers to a person who has internet access. This is the simplest form of bitmap index. Most columns will have more distinct values. For example, the sales amount is likely to have a much larger number of distinct values. Variations on the bitmap index can effectively index this data as well. We briefly review three such variations. Note: Many of the references cited here are reviewed at (John Wu (2007)). For those who might be interested in experimenting with some of the ideas mentioned here, many of them are implemented in open source software such as FastBit, the Lemur Bitmap Index C++ Library, the Roaring Bitmap Java library and the Apache Hive Data Warehouse system. == Compression == For historical reasons, bitmap compression and inverted list compression were developed as separate lines of research, and only later were recognized as solving essentially the same problem. Software can compress each bitmap in a bitmap index to save space. There has been considerable amount of work on this subject. Though there are exceptions such as Roaring bitmaps, Bitmap compression algorithms typically employ run-length encoding, such as the Byte-aligned Bitmap Code, the Word-Aligned Hybrid code, the Partitioned Word-Aligned Hybrid (PWAH) compression, the Position List Word Aligned Hybrid, the Compressed Adaptive Index (COMPAX), Enhanced Word-Aligned Hybrid (EWAH) and the COmpressed 'N' Composable Integer SEt (CONCISE). These compression methods require very little effort to compress and decompress. More importantly, bitmaps compressed with BBC, WAH, COMPAX, PLWAH, EWAH and CONCISE can directly participate in bitwise operations without decompression. This gives them considerable advantages over generic compression techniques such as LZ77. BBC compression and its derivatives are used in a commercial database management system. BBC is effective in both reducing index sizes and maintaining query performance. BBC encodes the bitmaps in bytes, while WAH encodes in words, better matching current CPUs. "On both synthetic data and real application data, the new word aligned schemes use only 50% more space, but perform logical operations on compressed data 12 times faster than BBC." PLWAH bitmaps were reported to take 50% of the storage space consumed by WAH bitmaps and offer up to 20% faster performance on logical operations. Similar considerations can be done for CONCISE and Enhanced Word-Aligned Hybrid. The performance of schemes such as BBC, WAH, PLWAH, EWAH, COMPAX and CONCISE is dependent on the order of the rows. A simple lexicographical sort can divide the index size by 9 and make indexes several times faster. The larger the table, the more important it is to sort the rows. Reshuffling techniques have also been proposed to achieve the same results of sorting when indexing streaming data. == Encoding == Basic bitmap indexes use one bitmap for each distinct value. It is possible to reduce the number of bitmaps used by using a different encoding method. For example, it is possible to encode C distinct values using log(C) bitmaps with binary encoding. This reduces the number of bitmaps, further saving space, but to answer any query, most of the bitmaps have to be accessed. This makes it potentially not as effective as scanning a vertical projection of the base data, also known as a materialized view or projection index. Finding the optimal encoding method that balances (arbitrary) query performance, index size and index maintenance remains a challenge. Without considering compression, Chan and Ioannidis analyzed a class of multi-component encoding methods and came to the conclusion that two-component encoding sits at the kink of the performance vs. index size curve and therefore represents the best trade-off between index size and query performance. == Binning == For high-cardinality columns, it is useful to bin the values, where each bin covers multiple values and build the bitmaps to represent the values in each bin. This approach reduces the number of bitmaps used regardless of encoding method. However, binned indexes can only answer some queries without examining the base data. For example, if a bin covers the range from 0.1 to 0.2, then when the user asks for all values less than 0.15, all rows that fall in the bin are possible hits and have to be checked to verify whether they are actually less than 0.15. The process of checking the base data is known as the candidate check. In most cases, the time used by the candidate check is significantly longer than the time needed to work with the bitmap index. Therefore, binned indexes exhibit irregular performance. They can be very fast for some queries, but much slower if the query does not exactly match a bin. == History == The concept of bitmap index was first introduced by Professor Israel Spiegler and Rafi Maayan in their research "Storage and Retrieval Considerations of Binary Data Bases", published in 1985. The first commercial database product to implement a bitmap index was Computer Corporation of America's Model 204. Patrick O'Neil published a paper about this implementation in 1987. This implementation is a hybrid between the basic bitmap index (without compression) and the list of Row Identifiers (RID-list). Overall, the index is organized as a B+tree. When the column cardinality is low, each leaf node of the B-tree would contain long list of RIDs. In this case, it requires less space to represent the RID-lists as bitmaps. Since each bitmap represents one distinct value, this is the basic bitmap index. As the column cardinality increases, each bitmap becomes sparse and it may take more disk space to store the bitmaps than to store the same content as RID-lists. In this case, it switches to use the RID-lists, which makes it a B+tree index. == In-memory bitmaps == One of the strongest reasons for using bitmap indexes is that the intermediate results produced from them are also bitmaps and can be efficiently reused in further operations to answer more complex queries. Many programming languages support this as a bit array data structure. For example, Java has the BitSet class and .NET have the BitArray class. Some database systems that do not offer persistent bitmap indexes use bitmaps internally to speed up query processing. For example, PostgreSQL versions 8.1 and later implement a "bitmap index scan" optimization to speed up arbitrarily complex logical operations between available indexes on a single table. For tables with many columns, the total number of distinct indexes to satisfy all possible queries (with equality filtering conditions on either of the fields) grows very fast, being defined by this formula: C n [ n 2 ] ≡ n ! ( n − [ n 2 ] ) ! [ n 2 ] ! {\displaystyle \mathbf {C} _{n}^{\left[{\frac {n}{2}}\right]}\equiv {\frac {n!}{\left(n-\left[{\frac {n}{2}}\right]\right)!\left[{\frac {n}{2}}\right]!}}} . A bitmap index scan combines expressions on different indexes, thus requiring only one index per column t

  Read more →
• 

  Radical trust

  Radical trust is the confidence that any structured organization, such as a government, library, business, religion, or museum, has in collaboration and empowerment within online communities. Specifically, it pertains to the use of blogs, wiki and online social networking platforms by organizations to cultivate relationships with an online community that then can provide feedback and direction for the organization's interest. The organization 'trusts' and uses that input in its management. One of the first appearances of the notion of radical trust appears in an info graphic outlining the base principles of web 2.0 in Tim O'Reilly's weblog post "What is Web 2.0". Radical Trust is listed as the guiding example of trusting the validity of consumer generated media. This concept is considered to be an underlying assumption of Library 2.0. The adoption of radical trust by a library would require its management let go of some of its control over the library and building an organization without an end result in mind. The direction a library would take would be based on input provided by people through online communities. These changes in the organization may merely be anecdotal in nature, making this method of organization management dramatically distinct from data-based or evidence based management. In marketing, Collin Douma further describes the notion of radical trust as a key mindset required for marketers and advertisers to enter the social media marketing space. Conventional marketing dictates and maintains control of messages to cause the greatest persuasion in consumer decisions, but Douma argued that in the social media space, brands would need to cede that control in order to build brand loyalty.

  Read more →
• 

  Smart environment

  Smart environments link computers and other smart devices to everyday settings and tasks. Smart environments include smart homes, smart cities, and smart manufacturing. == Introduction == Smart environments are an extension of pervasive computing. According to Mark Weiser, pervasive computing promotes the idea of a world that is connected to sensors and computers. These sensors and computers are integrated with everyday objects in peoples' lives and are connected through networks. == Definition == Cook and Das, define a smart environment as "a small world where different kinds of smart devices are continuously working to make inhabitants' lives more comfortable." Smart environments aim to satisfy the experience of individuals from every environment, by replacing hazardous work, physical labor, and repetitive tasks with automated agents. Poslad differentiates three different kinds of smart environments for systems, services, and devices: virtual (or distributed) computing environments, physical environments, and human environments, or a hybrid combination of these: Virtual computing environments enable smart devices to access pertinent services anywhere and anytime. Physical environments may be embedded with various smart devices of different types including tags, sensors, and controllers, and have different form factors ranging from nano- to micro- to macro-sized. Human environments: humans, either individually or collectively, inherently form a smart environment for devices. However, humans themselves may be accompanied by smart devices such as mobile phones, use surface-mounted devices (wearable computing), and contain embedded devices (e.g., pacemakers to maintain a healthy heart operation or AR contact lenses) == Features == Smart environments encompass a range of features and services across various domains, including smart homes, smart cities, smart health, and smart factories. Some of the key features of smart environments are: Sensors and Actuators: Smart environments are equipped with an assembly of sensors and actuators that collect data and initiate actions to provide services for the betterment of human life. Interconnected Systems: These environments consist of interconnected systems that enable seamless communication and coordination among various devices and components. Data-Driven Technologies: Smart environments leverage data-driven technologies, such as the Internet of Things (IoT), to obtain information from the physical world, process it, and perform actions accordingly. Efficiency and Sustainability: They are designed to improve efficiency, sustainable practices, and resource management across different settings, such as energy efficiency in smart homes and environmental quality management in smart cities. Diverse Requirements: Different types of smart environments have diverse requirements and technology choices, influencing the processing and utilization of data within a specific environment. == Technologies == Building a smart environment involves technologies of Wireless communication Algorithm design, signal prediction & classification, information theory Multilayered software architecture, Corba, middleware Speech recognition Image processing, image recognition Sensors design, calibration, motion detection, temperature, pressure sensors, accelerometers Semantic Web and knowledge graphs Adaptive control, Kalman filters Computer networking Parallel processing Operating systems == Existing projects == The Aware Home Research Initiative at Georgia Tech "is devoted to the multidisciplinary exploration of emerging technologies and services based in the home" and was launched in 1998 as one of the first "living laboratories." The Mav Home (Managing an Adaptive Versatile Home) project, at UT Arlington, is a smart environment-lab with state-of-the-art algorithms and protocols used to provide a customized, personal environment to the users of this space. The Mav Home project, in addition to providing a safe environment, wants to reduce the energy consumption of the inhabitants. Other projects include House at the MIT Media Lab and many others.

  Read more →
• 

  Social media as a news source

  Social media as a news source is defined as the use of online social media platforms such as Instagram, TikTok, and Facebook rather than the use of traditional media platforms like the newspaper or live TV to obtain news. Television had just begun to turn a nation of people who once listened to media content into watchers of media content between the 1950s and the 1980s when the popularity of social media had also begun creating a nation of media content creators. Almost half of Americans use social media as a news source, according to the Pew Research Center. As social media's role in news consumption grows, questions have emerged about its impact on knowledge, the formation of echo chambers, and the effectiveness of fact-checking efforts in combating misinformation. Social media platforms allow user-generated content and sharing content within one's own virtual network. Using social media as a news source allows users to engage with news in a variety of ways including: Consuming and discovering news Sharing or reposting news Posting one's own photos, videos, or reports of news (i.e., engage in citizen or participatory journalism) Commenting on news posts Using social media as a news source has become an increasingly popular way for people of all age groups to obtain current and important information. Just like many other new forms of technology there are going to be pros and cons. There are ways that social media positively affects the world of news and journalism but it is important to acknowledge that there are also ways in which social media has a negative effect on the news. With this accessibility, people now have more ways to consume false news, biased news, and even disturbing content. In 2019, the Pew Research Center created a poll that reported Americans are wary about the ways that social media sites share news and certain content. This wariness of accuracy grew as awareness that social media sites could be exploited by bad actors who concoct false narratives and fake news. == Relationship to traditional news sources == Unlike traditional news platforms such as newspapers and news shows, social media platforms allow people without professional journalistic backgrounds to create news and cover events that news agencies might not cover. Social media users may read a set of news that differs slightly from what newspaper editors prioritize in the print press. A 2019 study found that Facebook and Twitter users are more likely to share politics, public affairs, and visual media news. Typically social media users circulate more towards posting about negative news. A study of tweets found that while optimistic-sounding and neutral-sounding tweets were equally likely to express certainty or uncertainty, the pessimistic tweets were nearly twice as likely to appear certain of an outcome than uncertain. These results could imply that posts of a more pessimistic nature that are also written with an air of certainty are more likely to be shared or otherwise permeate groups on Twitter. A similar bias towards negativity has developed on Facebook, where internal memos revealed that an algorithm built to promote "meaningful social interaction" actually incentivized publishers to promote negative and sensational news. Biases towards negativity need to be considered when the utility of new media is addressed, as the potential for human opinion to overemphasize any particular news story is greater despite general improvement. In order to compete in this rapidly changing technological environment, there has been an upheaval of traditional news sources onto online spaces. The production and circulation of newspaper prints have continued to globally decline in accordance with the increasing presence of news outlets on social media. Prominent platforms such as Twitter and Facebook have been key in engaging users through the integration of journalistic news into their newsfeeds. This feature has now become a foundational part of these apps' interfaces. Social media incentivizes both legacy news brands and individual professional journalists to share their reporting and interact with audiences on social platforms to boost engagement. However, most people who consume news on social media report that accessing news is not their main motivation for being on social media, but rather, they see and consume news incidentally. Nonetheless, informational interviews reveal that these consumers rely on being informed through social media. Some news consumers attest that a news brand's participation in social media does not improve their trust in the brand and that more in-depth reporting and more transparency about biases would improve trust instead. == Use as a news source == Globally, data from 2020 shows that over 70% of adult participants from Kenya, South Africa, Chile, Bulgaria, Greece, and Argentina utilized social media for news while those from France, the UK, the Netherlands, Germany, and Japan were reportedly less than 40 percent. According to the Pew Research Center, 20% of adults in the United States in 2018 said they get their news from social media "often," compared to 16% who said they often get news from print newspapers, 26% who often get it from the radio, 33% who often get it from news websites, and 49% who often get it from TV. The same survey found that social media was the most popular way for American adults age 18–29 to get news, the second-to-last most popular way for Americans age 20–49 to get news, and the least popular way for American adults age 50-64 and 65+ to get the news. In 2019, the Pew Research Center found that over half of Americans (54%) either got their news "sometimes" or "often" from social media, and Facebook was the most popular social media site where American adults got their news. However, at least 50% off all respondents reported that the following were either a "very big problem" or a "moderately big problem" for getting news on social media: One-sided news (83%) Inaccurate news (81%) Censorship of the news (69%) Uncivil discussions about the news (69%) Harassment of journalists (57%) News organizations or personalities being banned (53%) Violent or disturbing news images or videos (51%) In a later survey from the same year, the Pew Research Center reported that 18% of American adults reported that the most common way they get news about politics and the election was from social media. Additional source information shows that from politics and the United States presidential election in 2016, the popularity of fake news had grown to global attention. With this information, the study explains that more than 60 percent of adults receive their news from social media, the most popular being Facebook. With the increase of fake news, and the large amount of adult participation on these social media sites, it made it much harder for those who were searching for news to find a source that they could find credible. Another study found that adult participants found their own friends on Facebook to be a more reliable source of information online compared to a professional news organization. Although, when news was posted by a news organization online, they were then found more reliable compared to when they are shared by their online friends. Showing that adult participants found that the news that was only posted on Facebook and social media was much more credible to them than compared to other forms of information spreading. The study further states that these outcomes have the potential explanation that the topic of the news article played a part in the ways they were affected. This could have affected the way adult participants interacted with the different news sources, such as their online friends compared to a news organization, prominently because depending on the story, they want to have the correct information about the news from the most credible source. === By young people === Social media platforms are some of the most easily accessible forms of news and with the growing generations, the technology is only going to grow. With that, the use of social media in younger generations is also going to grow alongside it. Technology in the hands of young kids can be a concern moving into the future. Globally, there is evidence that through social media, youth have become more directly involved in protests, social campaigns and generally, in the sharing of news across multiple platforms. The number of people who use social media platforms such as Twitter, Facebook, Instagram, or Snapchat as ways to seek information has increased significantly in recent years especially for people who are part of the younger generation.TikTok is a rapidly expanding platform that young adults can use to find news content on social media. TikTok is one of the sites that young adults and teens utilize to get news about trending themes and controversial topics. The younger generation accepts without hesitation the information that thei

  Read more →
• 

  CANaerospace

  CANaerospace is a higher layer protocol based on Controller Area Network (CAN) which has been developed by Stock Flight Systems in 1998 for aeronautical applications. == Background == CANaerospace supports airborne systems employing the Line-replaceable unit (LRU) concept to share data across CAN and ensures interoperability between CAN LRUs by defining CAN physical layer characteristics, network layers, communication mechanisms, data types and aeronautical axis systems. CANaerospace is an open source project, was initiated to standardize the interface between CAN LRUs on the system level. CANaerospace is continuously being developed further and has also been published by NASA as the Advanced General Aviation Transport Experiments Databus Standard in 2001. It found widespread use in aeronautical research worldwide. A major research aircraft that employs several CANaerospace networks for real-time computer interconnection is the Stratospheric Observatory for Infrared Astronomy (SOFIA), a Boeing 747SP with a 2.5m astronomic telescope. CANaerospace is also frequently used in flight simulation and connects entire aircraft cockpits (i.e. in Eurofighter Typhoon simulators) to the simulation host computers. In Italy CANaerospace is used as UAV data bus technology. Furthermore, CANaerospace serves as communication network in several general aviation avionics systems. The CANaerospace interface definition closes the gap between the ISO/OSI layer 1 and 2 CAN protocol (which is implemented in the CAN controller itself) and the specific requirements of distributed systems in aircraft. It may be used as a primary or ancillary avionics network and was designed to meet the following requirements: Democratic network: CANaerospace does not require any master/slave relationships between LRUs or a "bus controller", thereby avoiding a potential single source of failure. Every node in the network has the same rights for participation in the bus traffic. Self-identifying message format: Each CANaerospace message contains information about the type of the data and the transmitting node. This allows the data to be unambiguously recognized at each receiving node. Continuous Message Numbering: Each CANaerospace message contains a continuously incremented number which allows coherent processing of messages in the receiving stations. Message Status Code: Each CANaerospace message contains information about the integrity of the data is conveying. This allows receiving stations to evaluate the quality of the received data and to react accordingly. Emergency Event Signaling: CANaerospace defines a mechanism that allows each node to transmit information about exception or error situations. This information can be used by other stations to determine the network health. Node Service Interface: As an enhancement to CAN, CANaerospace provides a means for individual stations on the network to communicate with each other using connection-oriented and connectionless services. Predefined CAN Identifier Assignment: CANaerospace offers a predefined identifier assignment list for normal operation data. In addition to the predefined list, user-defined identifier assignment lists may be used. Ease of Implementation: The amount of code to implement CANaerospace is very little by design in order to minimize the effort for testing and certification of flight safety critical systems. Openness to Extensions: All CANaerospace definitions are extendable to provide flexibility for future enhancements and to allow adaptions to the requirements of specific applications. Free Availability: No cost whatsoever apply for the use of CANaerospace. The specification can be downloaded from the Internet == Physical interface == To ensure interoperability and reliable communication, CANaerospace specifies the electrical characteristics, bus transceiver requirements and data rates with the corresponding tolerances based on ISO 11898. The bit timing calculation (baud rate accuracy, sample point definition) and robustness to electromagnetic interference are given special emphasis. Also addressed are CAN connector, wiring considerations and design guidelines to maximize electromagnetic compatibility. == Communication layers == The Bosch CAN specification itself allows messages being transmitted both periodically and aperiodically but does not cover issues like data representation, node addressing or connection-oriented protocols. CAN is entirely based on Anyone-to-Many (ATM) communication which means that CAN messages are always received by all stations in the network. The advantage of the CAN concept is inherent data consistency between all stations, the drawback is that it does not allow node addressing which is the basis for Peer-to-Peer (PTP) communication. Using CAN networks in aeronautical applications, however, demands a standard targeted to the specific requirements of airborne systems which implies that communication between individual stations in the network must be possible to enable the required degree of system monitoring. Consequently, CANaerospace defines additional ISO/OSI layer 3, 4 and 6 functions to support node addressing and unified ATM/PTP communication mechanisms. PTP communication allows to set up client/server interactions between individual stations in the network either temporarily or permanently. More than one of these interactions may be in effect at any given time and each node may be client for one operation and server for another at the same time. This CANaerospace mechanism is called "Node Service Concept" and allows i.e. to distribute system functions over several stations in the network or to control dynamic system reconfiguration in case of failure. The Node Service concept supports both connection-oriented and connectionless interactions like with TCP/IP and UDP/IP for Ethernet. Enabling both ATM and PTP communication for CAN requires the introduction of independent network layers to isolate the different types of communication. This is realized for CANaerospace by forming CAN identifier groups as shown in Figure 1. The resulting structure creates Logical Communication Channels (LCCs) and assigns a specific communication type (ATM, PTP) to each of the LCCs. User-defined LCCs provide the necessary freedom for designers and allow the implementation of CANaerospace according to the needs of specific applications. Figure 1: Logical Communication Channels for CANaerospace As a side effect, the CAN identifier groups in Figure 1 affect the priority of the message transmission in case of bus arbitration. The communication channels are therefore arranged according to their relative importance: Emergency Event Data Channel (EED): This communication channel is used for messages which require immediate action (i.e. system degradation or reconfiguration) and have to be transmitted with very high priority. Emergency Event Data uses ATM communication exclusively. High/Low Priority Node Service Data Channel (NSH/NSL): These communication channels are used for client/server interactions using PTP communication. The corresponding services may be of the connection-oriented as well as the connectionless type. NSH/NSL may also be used to support test and maintenance functions. Normal Operation Data Channel (NOD): This communication channel is used for the transmission of the data which is generated during normal system operation and described in the CANaerospace identifier assignment list. These messages may be transmitted periodically or aperiodically as well as synchronously or asynchronously. All messages which cannot be assigned to other communication channels shall use this channel. High/Low Priority User-Defined Data Channel (UDH/UDL): This channel is dedicated to communication which cannot, due to their specific characteristics, be assigned other channels without violating the CANaerospace specification. As long as the defined identifier range is used, the message content and the communication type (ATM, PTP) for these channels may be specified by the system designer. To ensure interoperability it is highly recommended that the use of these channels is minimized. Debug Service Data Channel (DSD): This channel is dedicated to messages which are used temporarily for development and test purposes only and are not transmitted during normal operation. As long as the defined identifier range is used, the message content and the communication type (ATM, PTP) for these channels may be specified by the system designer. == Data representation == The majority of the real-time control systems used in aeronautics employ "big endian" processor architectures. This data representation was therefore specified for CANaerospace as well. With big endian data representation, the most significant bit of any datum is arranged leftmost and transmitted first on CANaerospace as shown in Figure 2. Figure 2: "Big Endian" Data Representation for CANaerospace CANaerospace uses a self-identifying message

  Read more →