AI Coding Platforms

AI Coding Platforms — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Wetware computer

    Wetware computer

    A wetware computer is an organic computer (which can also be known as an artificial organic brain or a neurocomputer) composed of organic material "wetware" such as "living" neurons. Wetware computers composed of neurons are different than conventional computers because they use biological materials, and offer the possibility of substantially more energy-efficient computing. While a wetware computer is still largely conceptual, there has been limited success with construction and prototyping, which has acted as a proof of the concept's realistic application to computing in the future. The most notable prototypes have stemmed from the research completed by biological engineer William Ditto during his time at the Georgia Institute of Technology. His work constructing a simple neurocomputer capable of basic addition from leech neurons in 1999 was a significant discovery for the concept. This research was a primary example driving interest in creating these artificially constructed, but still organic brains. == Origins and theoretical foundations == The term wetware came from cyberpunk fiction, notably through Gibson's Neuromancer, but was quickly taken up in scientific literature to explain computation by biological material. Theories of early biological computation borrowed from Alan Turing's morphogenesis model, which showed that chemical interactions could produce complex patterns without centralized control. Hopfield's associative memory networks also provided a foundation for biological information systems with fault tolerance and self-organization. == Major characteristics and processes == Biological wetware systems demonstrate dynamic reconfigurability underpinned by neuroplasticity and enable continuous learning and adaptation. Reaction-diffusion-based computing and molecular logic gates allow spatially parallel information processing unachievable in conventional systems. These systems also show fault tolerance and self-repair at the cellular and network level. The development of cerebral organoids—miniature lab-grown brains—demonstrates spontaneous learning behavior and suggests biological tissue as a viable computational substrate. == Overview == The concept of wetware is an application of specific interest to the field of computer manufacturing. Moore's law, which states that the number of transistors which can be placed on a silicon chip is doubled roughly every two years, has acted as a goal for the industry for decades, but as the size of computers continues to decrease, the ability to meet this goal has become more difficult, threatening to reach a plateau. Due to the difficulty in reducing the size of computers because of size limitations of transistors and integrated circuits, wetware provides an unconventional alternative. A wetware computer composed of neurons is an ideal concept because, unlike conventional materials which operate in binary (on/off), a neuron can shift between thousands of states, constantly altering its chemical conformation, and redirecting electrical pulses through over 200,000 channels in any of its many synaptic connections. Because of this large difference in the possible settings for any one neuron, compared to the binary limitations of conventional computers, the space limitations are far fewer. == Background == The concept of wetware is distinct and unconventional and draws slight resonance with both hardware and software from conventional computers. While hardware is understood as the physical architecture of traditional computational devices, comprising integrated circuits and supporting infrastructure, software represents the encoded architecture of storage and instructions. Wetware is a separate concept that uses the formation of organic molecules, mostly complex cellular structures (such as neurons), to create a computational device such as a computer. In wetware, the ideas of hardware and software are intertwined and interdependent. The molecular and chemical composition of the organic or biological structure would represent not only the physical structure of the wetware but also the software, being continually reprogrammed by the discrete shifts in electrical pulses and chemical concentration gradients as the molecules change their structures to communicate signals. The responsiveness of a cell, proteins, and molecules to changing conformations, both within their structures and around them, ties the idea of internal programming and external structure together in a way that is alien to the current model of conventional computer architecture. The structure of wetware represents a model where the external structure and internal programming are interdependent and unified; meaning that changes to the programming or internal communication between molecules of the device would represent a physical change in the structure. The dynamic nature of wetware borrows from the function of complex cellular structures in biological organisms. The combination of "hardware" and "software" into one dynamic, and interdependent system which uses organic molecules and complexes to create an unconventional model for computational devices is a specific example of applied biorobotics. === The cell as a model of wetware === Cells in many ways can be seen as their form of naturally occurring wetware, similar to the concept that the human brain is the preexisting model system for complex wetware. In his book Wetware: A Computer in Every Living Cell (2009) Dennis Bray explains his theory that cells, which are the most basic form of life, are just a highly complex computational structure, like a computer. To simplify one of his arguments a cell can be seen as a type of computer, using its structured architecture. In this architecture, much like a traditional computer, many smaller components operate in tandem to receive input, process the information, and compute an output. In an overly simplified, non-technical analysis, cellular function can be broken into the following components: Information and instructions for execution are stored as DNA in the cell, RNA acts as a source for distinctly encoded input, processed by ribosomes and other transcription factors to access and process the DNA and to output a protein. Bray's argument in favor of viewing cells and cellular structures as models of natural computational devices is important when considering the more applied theories of wetware to biorobotics. === Biorobotics === Wetware and biorobotics are closely related concepts, which both borrow from similar overall principles. A biorobotic structure can be defined as a system modeled from a preexisting organic complex or model such as cells (neurons) or more complex structures like organs (brain) or whole organisms. Unlike wetware, the concept of biorobotics is not always a system composed of organic molecules, but instead could be composed of conventional material which is designed and assembled in a structure similar or derived from a biological model. Biorobotics have many applications and are used to address the challenges of conventional computer architecture. Conceptually, designing a program, robot, or computational device after a preexisting biological model such as a cell, or even a whole organism, provides the engineer or programmer the benefits of incorporating into the structure the evolutionary advantages of the model. == Effects on users == Wetware technologies such as BCIs and neuromorphic chips offer new possibilities for user autonomy. For those with disabilities, such systems could restore motor or sensory functions and enhance quality of life. However, these technologies raise ethical questions: cognitive privacy, consent over biological data, and risk of exploitation. Without proper oversight, wetware technologies may also widen inequality, favoring those with access to cognitive enhancements. Open governance frameworks and ethical AI design grounded in neuro ethics will be essential. With the development of wetware devices, disparities in access could exacerbate social inequalities, benefiting those who have resources to enhance cognitive or physical abilities. It is necessary to create strong ethical frameworks, inclusive development practices, and open systems of governance to reduce risks and make sure that wetware advances are beneficial to all segments of society. == Applications and goals == === Basic neurocomputer composed of leech neurons === In 1999 William Ditto and his team of researchers at Georgia Institute of Technology and Emory University created a basic form of a wetware computer capable of simple addition by harnessing leech neurons. Leeches were used as a model organism due to the large size of their neuron, and the ease associated with their collection and manipulation. However, these results have never been published in a peer-reviewed journal, prompting questions about the validity of the claims. The computer was able to complete basic addition through electrical probes

    Read more →
  • Concurrency control

    Concurrency control

    In information technology and computer science, especially in the fields of computer programming, operating systems, multiprocessors, and databases, concurrency control ensures that correct results for concurrent operations are generated, while getting those results as quickly as possible. Computer systems, both software and hardware, consist of modules, or components. Each component is designed to operate correctly, i.e., to obey or to meet certain consistency rules. When components that operate concurrently interact by messaging or by sharing accessed data (in memory or storage), a certain component's consistency may be violated by another component. The general area of concurrency control provides rules, methods, design methodologies, and theories to maintain the consistency of components operating concurrently while interacting, and thus the consistency and correctness of the whole system. Introducing concurrency control into a system means applying operation constraints which typically result in some performance reduction. Operation consistency and correctness should be achieved with as good as possible efficiency, without reducing performance below reasonable levels. Concurrency control can require significant additional complexity and overhead in a concurrent algorithm compared to the simpler sequential algorithm. For example, a failure in concurrency control can result in data corruption from torn read or write operations. == Concurrency control in databases == Comments: This section is applicable to all transactional systems, i.e., to all systems that use database transactions (atomic transactions; e.g., transactional objects in Systems management and in networks of smartphones which typically implement private, dedicated database systems), not only general-purpose database management systems (DBMSs). DBMSs need to deal also with concurrency control issues not typical just to database transactions but rather to operating systems in general. These issues (e.g., see Concurrency control in operating systems below) are out of the scope of this section. Concurrency control in Database management systems (DBMS; e.g., Bernstein et al. 1987, Weikum and Vossen 2001), other transactional objects, and related distributed applications (e.g., Grid computing and Cloud computing) ensures that database transactions are performed concurrently without violating the data integrity of the respective databases. Thus concurrency control is an essential element for correctness in any system where two database transactions or more, executed with time overlap, can access the same data, e.g., virtually in any general-purpose database system. Consequently, a vast body of related research has been accumulated since database systems emerged in the early 1970s. A well established concurrency control theory for database systems is outlined in the references mentioned above: serializability theory, which allows to effectively design and analyze concurrency control methods and mechanisms. An alternative theory for concurrency control of atomic transactions over abstract data types is presented in (Lynch et al. 1993), and not utilized below. This theory is more refined, complex, with a wider scope, and has been less utilized in the Database literature than the classical theory above. Each theory has its pros and cons, emphasis and insight. To some extent they are complementary, and their merging may be useful. To ensure correctness, a DBMS usually guarantees that only serializable transaction schedules are generated, unless serializability is intentionally relaxed to increase performance, but only in cases where application correctness is not harmed. For maintaining correctness in cases of failed (aborted) transactions (which can always happen for many reasons) schedules also need to have the recoverability (from abort) property. A DBMS also guarantees that no effect of committed transactions is lost, and no effect of aborted (rolled back) transactions remains in the related database. Overall transaction characterization is usually summarized by the ACID rules below. As databases have become distributed, or needed to cooperate in distributed environments (e.g., Federated databases in the early 1990, and Cloud computing currently), the effective distribution of concurrency control mechanisms has received special attention. === Database transaction and the ACID rules === The concept of a database transaction (or atomic transaction) has evolved in order to enable both a well understood database system behavior in a faulty environment where crashes can happen any time, and recovery from a crash to a well understood database state. A database transaction is a unit of work, typically encapsulating a number of operations over a database (e.g., reading a database object, writing, acquiring lock, etc.), an abstraction supported in database and also other systems. Each transaction has well defined boundaries in terms of which program/code executions are included in that transaction (determined by the transaction's programmer via special transaction commands). Every database transaction obeys the following rules (by support in the database system; i.e., a database system is designed to guarantee them for the transactions it runs): Atomicity - Either the effects of all or none of its operations remain ("all or nothing" semantics) when a transaction is completed (committed or aborted respectively). In other words, to the outside world a committed transaction appears (by its effects on the database) to be indivisible (atomic), and an aborted transaction does not affect the database at all. Either all the operations are done or none of them are. Consistency - Every transaction must leave the database in a consistent (correct) state, i.e., maintain the predetermined integrity rules of the database (constraints upon and among the database's objects). A transaction must transform a database from one consistent state to another consistent state (however, it is the responsibility of the transaction's programmer to make sure that the transaction itself is correct, i.e., performs correctly what it intends to perform (from the application's point of view) while the predefined integrity rules are enforced by the DBMS). Thus since a database can be normally changed only by transactions, all the database's states are consistent. Isolation - Transactions cannot interfere with each other (as an end result of their executions). Moreover, usually (depending on concurrency control method) the effects of an incomplete transaction are not even visible to another transaction. Providing isolation is the main goal of concurrency control. Durability - Effects of successful (committed) transactions must persist through crashes (typically by recording the transaction's effects and its commit event in a non-volatile memory). The concept of atomic transaction has been extended during the years to what has become Business transactions which actually implement types of Workflow and are not atomic. However also such enhanced transactions typically utilize atomic transactions as components. === Why is concurrency control needed? === If transactions are executed serially, i.e., sequentially with no overlap in time, no transaction concurrency exists. However, if concurrent transactions with interleaving operations are allowed in an uncontrolled manner, some unexpected, undesirable results may occur, such as: The lost update problem: A second transaction writes a second value of a data-item (datum) on top of a first value written by a first concurrent transaction, and the first value is lost to other transactions running concurrently which need, by their precedence, to read the first value. The transactions that have read the wrong value end with incorrect results. The dirty read problem: Transactions read a value written by a transaction that has been later aborted. This value disappears from the database upon abort, and should not have been read by any transaction ("dirty read"). The reading transactions end with incorrect results. The incorrect summary problem: While one transaction takes a summary over the values of all the instances of a repeated data-item, a second transaction updates some instances of that data-item. The resulting summary does not reflect a correct result for any (usually needed for correctness) precedence order between the two transactions (if one is executed before the other), but rather some random result, depending on the timing of the updates, and whether certain update results have been included in the summary or not. Most high-performance transactional systems need to run transactions concurrently to meet their performance requirements. Thus, without concurrency control such systems can neither provide correct results nor maintain their databases consistently. === Concurrency control mechanisms === ==== Categories ==== The main categories of concurrency control mechanis

    Read more →
  • Computer Dreams

    Computer Dreams

    Computer Dreams is a 1988 film created by Digital Vision Entertainment and released by MPI Home Video. Written, produced and directed by Geoffrey de Valois and hosted by Amanda Pays, it consists primarily of clips and behind-the-scenes work of early computer graphics animation. Notably included are Luxo Jr. and Red's Dream, the first two short films from Pixar. The film is an hour long and features an electronic score by Music Fantastic. It was revised and re-released on DVD as The History of Computer Animation, Volume 2. It won the Winner Gold Special Jury Award at the 1989 Houston International Film Festival, and the 1989 Golden Decade Award from the US Film & Video Festival. Music used includes: Gail Lennon - Desire, Gail Lennon - Like A Dream, Shandi Sinnamon - Making It,

    Read more →
  • Log shipping

    Log shipping

    Log shipping is the process of automating the backup of transaction log files on a primary (production) database server, and then restoring them onto a standby server. This technique is supported by Microsoft SQL Server, 4D Server, MySQL, and PostgreSQL. Similar to replication, the primary purpose of log shipping is to increase database availability by maintaining a backup server that can replace a production server quickly. Other databases such as Adaptive Server Enterprise and Oracle Database support the technique but require the Database Administrator to write code or scripts to perform the work. Although the actual failover mechanism in log shipping is manual, this implementation is often chosen due to its low cost in human and server resources, and ease of implementation. In comparison, SQL server clusters enable automatic failover, but at the expense of much higher storage costs. Compared to database replication, log shipping does not provide as much in terms of reporting capabilities, but backs up system tables along with data tables, and locks the standby server from users' modifications. A replicated server can be modified (e.g. views) and is therefore unsuitable for failover purposes.

    Read more →
  • Joint constraints

    Joint constraints

    Joint constraints are rotational constraints on the joints of an artificial system. They are used in an inverse kinematics chain, in fields including 3D animation or robotics. Joint constraints can be implemented in a number of ways, but the most common method is to limit rotation about the X, Y and Z axis independently. An elbow, for instance, could be represented by limiting rotation on X and Z axis to 0 degrees, and constraining the Y-axis rotation to 130 degrees. To simulate joint constraints more accurately, dot-products can be used with an independent axis to repulse the child bones orientation from the unreachable axis. Limiting the orientation of the child bone to a border of vectors tangent to the surface of the joint, repulsing the child bone away from the border, can also be useful in the precise restriction of shoulder movement.

    Read more →
  • Commission on Enhancing National Cybersecurity

    Commission on Enhancing National Cybersecurity

    The President's Commission on Enhancing National Cybersecurity is a Presidential Commission formed on April 13, 2016, to develop a plan for protecting cyberspace, and America's economic reliance on it. The commission released its final report in December 2016. The report made recommendations regarding the intertwining roles of the military, government administration and the private sector in providing cyber security. Chairman Donilon said of the report that its coverage "is unusual in the breadth of issues" with which it deals. == Recommendations == The report made sixteen major recommendations with fifty-three specific action items broadly grouped under six areas: Protecting the information and digital infrastructure Investing in the secure growth of information and digital infrastructure Consumer information access Building the cybersecurity workforce Building a secure governmental cybersecurity framework Keeping interconnectivity open, fair, competitive, and secure The Commission found that strong authentication systems were mandatory for adequate cybersecurity, not just for the government, but for all commercial systems, and private individuals. The commission also stressed remote identity proofing and security for the Internet of things (IoT). Finding that technicians who know cybersecurity and can protect systems are few and in short supply, the commission recommended nationally supported training programs to produce an adequate workforce, as well as increasing the level of expertise in the existing workforce. The Commission highlighted the importance of partnerships between government and the private sector as a powerful tool for encouraging the technology, policies and practices we need to secure and grow the digital economy. (page 2) Some criticised the commission's work as lacking an understanding of cybersecurity and not being cognizant of "cyber reality" and the cost of some of the action items, but others found the report constructive and meaningful. == Commission members == The initial members of the Commission are: Tom Donilon, former Assistant to the President and National Security Advisor (Chair) Sam Palmisano, former CEO of IBM (Vice Chair) General Keith Alexander, CEO of IronNet Cybersecurity, former Director of the National Security Agency and former Commander of U.S. Cyber Command Annie Antón, Professor and Chair of the School of Interactive Computing at Georgia Tech. Ajay Banga, President and CEO of MasterCard Steven Chabinsky, General Counsel and Chief Risk Officer of CrowdStrike Patrick Gallagher, Chancellor of the University of Pittsburgh and former Director of the National Institute of Standards and Technology Peter Lee, Corporate Vice President, Microsoft Research Herbert Lin, Senior Research Scholar for Cyber Policy and Security at the Stanford Center for International Security and Cooperation and Research Fellow at the Hoover Institution Heather Murren, former member of the Financial Crisis Inquiry Commission and co-founder of the Nevada Cancer Institute Joe Sullivan, Chief Security Officer of Uber and former Chief Security Officer of Facebook Maggie Wilderotter, Executive Chairman of Frontier Communications == Follow-on == Incoming President Trump has indicated that he wants a full review of U.S. cyber protection policy. == Notes and references ==

    Read more →
  • IT8

    IT8

    IT8 is a set of American National Standards Institute (ANSI) standards for color communications and control specifications. Formerly governed by the IT8 Committee, IT8 activities were merged with those of the Committee for Graphics Arts Technologies Standards (CGATS Archived November 9, 2018, at the Wayback Machine) in 1994. == Standards list == The following is a list of the IT8 standards, according to the NPES Standards Blue Book Archived July 19, 2011, at the Wayback Machine: === IT8.6 - 2002 - Graphic technology - Prepress digital data exchange - Diecutting data (DDES3) === This standard establishes a data exchange format to enable transfer of numerical control information between diecutting systems and electronic prepress systems. The information will typically consist of numerical control information used in the manufacture of dies. 37 pp. === IT8.7/1 - 1993 (R2003) - Graphic technology - Color transmission target for input scanner calibration === This standard defines an input test target that will allow any color input scanner to be calibrated with any film dye set used to create the target. It is intended to address the color transparency products that are generally used for input to the preparatory process for printing and publishing. This standard defines the layout and colorimetric values of a target that can be manufactured on any positive color transparency film and that is intended for use in the calibration of a photographic film/scanner combination. 32 pp. === IT8.7/2 - 1993 (R2003) Graphic technology - Color reflection target for input scanner calibration === This standard defines an input test target that will allow any color input scanner to be calibrated with any film dye set used to create the target. It is intended to address the color photographic paper products that are generally used for input to the preparatory process for printing and publishing. It defines the layout and colorimetric values of the target that can be manufactured on any color photographic paper and is intended for use in the calibration of a photographic paper/scanner combination. 29 pp. === IT8.7/3 - 1993 (R2003) Graphic technology - Input data for characterization of 4-color process printing === The purpose of this standard is to specify an input data file, a measurement procedure and an output data format to characterize any four-color printing process. The output data (characterization) file should be transferred with any four-color (cyan, magenta, yellow and black) halftone image files to enable a color transformation to be undertaken when required. 29 pp. == Targets == Calibrating all devices involved in the process chain (original, scanner/digital camera, monitor/printer) is required for an authentic color reproduction, because their actual color spaces differ device-specifically from the reference color spaces. An IT8 calibration is done with what are called IT8 targets, which are defined by the IT8 standards. Example Special targets, implementing the IT8.7/1 (transparent target) or IT8.7/2 (reflective target) standards, are needed for calibrating scanners. These targets consists of 24 grey fields and 264 color fields in 22 columns: Column 01 to 12: HCL color model, which differ in Hue, Chroma, and Lightness Column 13 to 16: CMYK-Colors Cyan, Magenta, Yellow, and Key (black) in different steps of brightness Column 17 to 19: RGB-Colors Red, Green, and Blue in different steps of brightness Column 20 to 22: undefined, producers' choice After scanning such a target, an ICC profile gets calculated on the basis of reference values. This profile is used for all subsequent scans and assures color fidelity.

    Read more →
  • System Service Descriptor Table

    System Service Descriptor Table

    The System Service Descriptor Table (SSDT) is an internal dispatch table within Microsoft Windows. == Function == The SSDT maps syscalls to kernel function addresses. When a syscall is issued by a user space application, it contains the service index as parameter to indicate which syscall is called. The SSDT is then used to resolve the address of the corresponding function within ntoskrnl.exe. In modern Windows kernels, two SSDTs are used: One for generic routines (KeServiceDescriptorTable) and a second (KeServiceDescriptorTableShadow) for graphical routines. A parameter passed by the calling userspace application determines which SSDT shall be used. == Hooking == Modification of the SSDT allows to redirect syscalls to routines outside the kernel. These routines can be either used to hide the presence of software or to act as a backdoor to allow attackers permanent code execution with kernel privileges. For both reasons, hooking SSDT calls is often used as a technique in both Windows kernel mode rootkits and antivirus software. In 2010, many computer security products which relied on hooking SSDT calls were shown to be vulnerable to exploits using race conditions to attack the products' security checks.

    Read more →
  • List of computer graphics journals

    List of computer graphics journals

    List of computer graphics journals includes notable peer-reviewed scientific and academic journals that focus on computer graphics, visualization, and related areas such as rendering, animation, image processing, and geometric modeling. == Journals == ACM Transactions on Graphics Computers & Graphics IEEE Computer Graphics and Applications IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems Graphical Models Journal of Computer Graphics Techniques Presence: Teleoperators and Virtual Environments Virtual Reality Simulation & Gaming

    Read more →
  • Lossless join decomposition

    Lossless join decomposition

    In database design, a lossless join decomposition is a decomposition of a relation r {\displaystyle r} into relations r 1 , r 2 {\displaystyle r_{1},r_{2}} such that a natural join of the two smaller relations yields back the original relation. This is central in removing redundancy safely from databases while preserving the original data. Lossless join can also be called non-additive. == Definition == A relation r {\displaystyle r} on schema R {\displaystyle R} decomposes losslessly onto schemas R 1 {\displaystyle R_{1}} and R 2 {\displaystyle R_{2}} if π R 1 ( r ) ⋈ π R 2 ( r ) = r {\displaystyle \pi _{R_{1}}(r)\bowtie \pi _{R_{2}}(r)=r} , that is r {\displaystyle r} is the natural join of its projections onto the smaller schemas. A pair ( R 1 , R 2 ) {\displaystyle (R_{1},R_{2})} is a lossless-join decomposition of R {\displaystyle R} or said to have a lossless join with respect to a set of functional dependencies F {\displaystyle F} if any relation r ( R ) {\displaystyle r(R)} that satisfies F {\displaystyle F} decomposes losslessly onto R 1 {\displaystyle R_{1}} and R 2 {\displaystyle R_{2}} . Decompositions into more than two schemas can be defined in the same way. == Criteria == A decomposition R = R 1 ∪ R 2 {\displaystyle R=R_{1}\cup R_{2}} has a lossless join with respect to F {\displaystyle F} if and only if the closure of R 1 ∩ R 2 {\displaystyle R_{1}\cap R_{2}} includes R 1 ∖ R 2 {\displaystyle R_{1}\setminus R_{2}} or R 2 ∖ R 1 {\displaystyle R_{2}\setminus R_{1}} . In other words, one of the following must hold: ( R 1 ∩ R 2 ) → ( R 1 ∖ R 2 ) ∈ F + {\displaystyle (R_{1}\cap R_{2})\to (R_{1}\setminus R_{2})\in F^{+}} ( R 1 ∩ R 2 ) → ( R 2 ∖ R 1 ) ∈ F + {\displaystyle (R_{1}\cap R_{2})\to (R_{2}\setminus R_{1})\in F^{+}} === Criteria for multiple sub-schemas === Multiple sub-schemas R 1 , R 2 , . . . , R n {\displaystyle R_{1},R_{2},...,R_{n}} have a lossless join if there is some way in which we can repeatedly perform lossless joins until all the schemas have been joined into a single schema. Once we have a new sub-schema made from a lossless join, we are not allowed to use any of its isolated sub-schema to join with any of the other schemas. For example, if we can do a lossless join on a pair of schemas R i , R j {\displaystyle R_{i},R_{j}} to form a new schema R i , j {\displaystyle R_{i,j}} , we use this new schema (rather than R i {\displaystyle R_{i}} or R j {\displaystyle R_{j}} ) to form a lossless join with another schema R k {\displaystyle R_{k}} (which may already be joined (e.g., R k , l {\displaystyle R_{k,l}} )). == Example == Let R = { A , B , C , D } {\displaystyle R=\{A,B,C,D\}} be the relation schema, with attributes A, B, C and D. Let F = { A → B C } {\displaystyle F=\{A\rightarrow BC\}} be the set of functional dependencies. Decomposition into R 1 = { A , B , C } {\displaystyle R_{1}=\{A,B,C\}} and R 2 = { A , D } {\displaystyle R_{2}=\{A,D\}} is lossless under F because R 1 ∩ R 2 = A {\displaystyle R_{1}\cap R_{2}=A} and we have a functional dependency A → B C {\displaystyle A\rightarrow BC} . In other words, we have proven that ( R 1 ∩ R 2 → R 1 ∖ R 2 ) ∈ F + {\displaystyle (R_{1}\cap R_{2}\rightarrow R_{1}\setminus R_{2})\in F^{+}} .

    Read more →
  • Generative design

    Generative design

    Generative design is an iterative design process that uses software to generate outputs that fulfill a set of constraints iteratively adjusted by a designer. Whether a human, test program, or artificial intelligence, the designer algorithmically or manually refines the feasible region of the program's inputs and outputs with each iteration to fulfill evolving design requirements. By employing computing power to evaluate more design permutations than a human alone is capable of, the process is capable of producing an optimal design that mimics nature's evolutionary approach to design through genetic variation and selection. The output can be images, sounds, architectural models, animation, and much more. It is, therefore, a fast method of exploring design possibilities that is used in various design fields such as art, architecture, communication design, and product design. Generative design has become more important, largely due to new programming environments or scripting capabilities that have made it relatively easy, even for designers with little programming experience, to implement their ideas. Additionally, this process can create solutions to substantially complex problems that would otherwise be resource-exhaustive with an alternative approach, making it a more attractive option for problems with a large or unknown solution set. It is also facilitated with tools in commercially available CAD packages. Not only are implementation tools more accessible, but also tools leveraging generative design as a foundation. Recent advancements have led to the development of Deep Generative Design, a framework that integrates topology optimization with deep learning models, such as Generative Adversarial Networks (GANs). Unlike traditional evolutionary methods that primarily focus on engineering performance, this approach uses deep generative models to enhance aesthetic diversity and novelty while simultaneously satisfying engineering constraints. For instance, research by Oh et al. (2019) proposed a framework using Boundary Equilibrium GANs (BEGAN) to generate diverse design options which are then refined through density-based topology optimization, allowing for the exploration of complex design spaces that balance structural integrity with visual variation. In practice, generative design does not solely aim to produce a single optimal solution, but involves iteratively refining the design problem by modifying parameters, constraints, and evaluation criteria within a computational model, resulting in multiple design alternatives from which the designer selects. == Use in architecture == Generative design in architecture is an iterative design process that enables architects to explore a wider solution space with more possibility and creativity. Architectural design has long been regarded as a wicked problem. Compared with traditional top-down design approach, generative design can address design problems efficiently, by using a bottom-up paradigm that uses parametric-defined rules to generate complex solutions. The solution itself then evolves to a good, if not optimal, solution. The advantage of using generative design as a design tool is that it does not construct fixed geometries, but take a set of design rules that can generate an infinite set of possible design solutions. The generated design solutions can be more sensitive, responsive, and adaptive to the problem. Generative design involves rule definition and result analysis that are integrated with the design process. By defining parameters and rules, the generative approach is able to provide optimized solution for both structural stability and aesthetics. Possible design algorithms include cellular automata, shape grammar, genetic algorithm, space syntax, and most recently, artificial neural network. Due to the high complexity of the solution generated, rule-based computational tools, such as finite element method and topology optimisation, are preferred to evaluate and optimise the generated solution. The iterative process provided by computer software enables the trial-and-error approach in design, and involves architects interfering with the optimisation process. Historically precedent work includes Antoni Gaudí's Sagrada Família, which used rule based geometrical forms for structures, and Buckminster Fuller's Montreal Biosphere where the rules were designed to generate individual components, rather than the final product. More recent generative-design cases include Foster and Partners' Queen Elizabeth II Great Court, where the tessellated glass roof was designed using a geometric schema to define hierarchical relationships, and then the generated solution was optimized based on geometrical and structural requirements. == Use in sustainable design == Generative design in sustainable design is an effective approach addressing energy efficiency and climate change at the early design stage, recognizing buildings contribute to approximately one-third of global greenhouse gas emissions and 30%-40% of total building energy use. It integrates environmental principles with algorithms, enabling exploration of countless design alternatives to enhance energy performance, reduce carbon footprints, and minimize waste. A key feature of generative design in sustainable design is its ability to incorporate Building Performance Simulations (BPS) into the design process. Simulation programs such as EnergyPlus, Ladybug Tools,, and so on, combined with generative algorithms, can optimize design solutions for cost-effective energy use and zero-carbon building designs. For example, the GENE_ARCH system used a Pareto algorithm with building energy simulation for the whole building design optimization. Generative design has improved sustainable facade design, as illustrated by the algorithm of cellular automata and daylight simulations in adaptive facade design. In addition, genetic algorithms were used with radiation simulations for energy-efficient photo-voltaic (PV) modules on high-rise building facades. Generative design is also applied to life cycle analysis (LCA), as demonstrated by a framework using grid search algorithms to optimize exterior wall design for minimum environmental impact. Multi-objective optimization embraces multiple diverse sustainability goals, such as interactive kinetic louvers using biomimicry and daylight simulations to enhance daylight, visual comfort, and energy efficiency. The study of PV and shading systems can maximize on-site electricity, improve visual quality, and daylight performance. Artificial intelligence (AI) and machine learning (ML) further improve computation efficiency in complex climate-responsive sustainable design. One study employed reinforcement learning to identify the relationship between design parameters and energy use for a sustainable campus, while other studies tried hybrid algorithms, such as using the genetic algorithm and GANs to balance daylight illumination and thermal comfort under different roof conditions. Other popular AI tools were also integrated, including deep reinforcement learning (DRL) and computer vision (CV), to generate an urban block according to direct sunlight hours and solar heat gains. These AI-driven generative design methods enable faster simulations and design decision making, resulting in designs that are environmentally responsible. == Use in additive manufacturing == Additive manufacturing (AM) is a process that creates physical models directly from three-dimensional (3D) data by joining materials layer by layer. It is used in industries to produce a variety of end-use parts, which are final components designed for direct application in products or systems. AM provides design flexibility and enables material reduction in lightweight applications, such as aerospace, automotive, medical, and portable electronic devices, where minimizing weight is critical for performance. Generative design, one of the four key methods for lightweight design in AM, is commonly applied to optimize structures for specific performance requirements. Generative design can help create optimized solutions that balance multiple objectives, such as enhancing performance while minimizing cost. In design for additive manufacturing (DfAM), multi-objective topology optimization is used to generate a set of candidate solutions. Designers then assess these options using their expertise and key performance indicators (KPIs) to select the best option for implementation. However, integrating AM constraints (e.g., speed of build, materials, build envelope, and accuracy) into generative design remains challenging, as ensuring all solutions are valid is complex. Balancing multiple design objectives while limiting computational costs adds further challenges for designers. To overcome these difficulties, researchers proposed a generative design method with manufacturing validation to improve decision-making efficiency. This method starts with a cons

    Read more →
  • IT baseline protection

    IT baseline protection

    The IT baseline protection (German: IT-Grundschutz) approach from the German Federal Office for Information Security (BSI) is a methodology to identify and implement computer security measures in an organization. The aim is the achievement of an adequate and appropriate level of security for IT systems. To reach this goal the BSI recommends "well-proven technical, organizational, personnel, and infrastructural safeguards". Organizations and federal agencies show their systematic approach to secure their IT systems (e.g. Information Security Management System) by obtaining an ISO/IEC 27001 Certificate on the basis of IT-Grundschutz. == Overview baseline security == The term baseline security signifies standard security measures for typical IT systems. It is used in various contexts with somewhat different meanings. For example: Microsoft Baseline Security Analyzer: Software tool focused on Microsoft operating system and services security Cisco security baseline: Vendor recommendation focused on network and network device security controls Nortel baseline security: Set of requirements and best practices with a focus on network operators ISO/IEC 13335-3 defines a baseline approach to risk management. This standard has been replaced by ISO/IEC 27005, but the baseline approach was not taken over yet into the 2700x series. There are numerous internal baseline security policies for organizations, The German BSI has a comprehensive baseline security standard, that is compliant with the ISO/IEC 27000-series == BSI IT baseline protection == The foundation of an IT baseline protection concept is initially not a detailed risk analysis. It proceeds from overall hazards. Consequently, sophisticated classification according to damage extent and probability of occurrence is ignored. Three protection needs categories are established. With their help, the protection needs of the object under investigation can be determined. Based on these, appropriate personnel, technical, organizational and infrastructural security measures are selected from the IT Baseline Protection Catalogs. The Federal Office for Security in Information Technology's IT Baseline Protection Catalogs offer a "cookbook recipe" for a normal level of protection. Besides probability of occurrence and potential damage extents, implementation costs are also considered. By using the Baseline Protection Catalogs, costly security analyses requiring expert knowledge are dispensed with, since overall hazards are worked with in the beginning. It is possible for the relative layman to identify measures to be taken and to implement them in cooperation with professionals. The BSI grants a baseline protection certificate as confirmation for the successful implementation of baseline protection. In stages 1 and 2, this is based on self declaration. In stage 3, an independent, BSI-licensed auditor completes an audit. Certification process internationalization has been possible since 2006. ISO/IEC 27001 certification can occur simultaneously with IT baseline protection certification. (The ISO/IEC 27001 standard is the successor of BS 7799-2). This process is based on the new BSI security standards. This process carries a development price which has prevailed for some time. Corporations having themselves certified under the BS 7799-2 standard are obliged to carry out a risk assessment. To make it more comfortable, most deviate from the protection needs analysis pursuant to the IT Baseline Protection Catalogs. The advantage is not only conformity with the strict BSI, but also attainment of BS 7799-2 certification. Beyond this, the BSI offers a few help aids like the policy template and the GSTOOL. One data protection component is available, which was produced in cooperation with the German Federal Commissioner for Data Protection and Freedom of Information and the state data protection authorities and integrated into the IT Baseline Protection Catalog. This component is not considered, however, in the certification process. == Baseline protection process == The following steps are taken pursuant to the baseline protection process during structure analysis and protection needs analysis: The IT network is defined. IT structure analysis is carried out. Protection needs determination is carried out. A baseline security check is carried out. IT baseline protection measures are implemented. Creation occurs in the following steps: IT structure analysis (survey) Assessment of protection needs Selection of actions Running comparison of nominal and actual. === IT structure analysis === An IT network includes the totality of infrastructural, organizational, personnel, and technical components serving the fulfillment of a task in a particular information processing application area. An IT network can thereby encompass the entire IT character of an institution or individual division, which is partitioned by organizational structures as, for example, a departmental network, or as shared IT applications, for example, a personnel information system. It is necessary to analyze and document the information technological structure in question to generate an IT security concept and especially to apply the IT Baseline Protection Catalogs. Due to today's usually heavily networked IT systems, a network topology plan offers a starting point for the analysis. The following aspects must be taken into consideration: The available infrastructure, The organizational and personnel framework for the IT network, Networked and non-networked IT systems employed in the IT network. The communications connections between IT systems and externally, IT applications run within the IT network. === Protection needs determination === The purpose of the protection needs determination is to investigate what protection is sufficient and appropriate for the information and information technology in use. In this connection, the damage to each application and the processed information, which could result from a breach of confidentiality, integrity or availability, is considered. Important in this context is a realistic assessment of the possible follow-on damages. A division into the three protection needs categories "low to medium", "high" and "very high" has proved itself of value. "Public", "internal" and "secret" are often used for confidentiality. === Modelling === Heavily networked IT systems typically characterize information technology in government and business these days. As a rule, therefore, it is advantageous to consider the entire IT system and not just individual systems within the scope of an IT security analysis and concept. To be able to manage this task, it makes sense to logically partition the entire IT system into parts and to separately consider each part or even an IT network. Detailed documentation about its structure is prerequisite for the use of the IT Baseline Protection Catalogs on an IT network. This can be achieved, for example, via the IT structure analysis described above. The IT Baseline Protection Catalog’s' components must ultimately be mapped onto the components of the IT network in question in a modelling step. === Baseline security check === The baseline security check is an organisational instrument offering a quick overview of the prevailing IT security level. With the help of interviews, the status quo of an existing IT network (as modelled by IT baseline protection) relative to the number of security measures implemented from the IT Baseline Protection Catalogs are investigated. The result is a catalog in which the implementation status "dispensable", "yes", "partly", or "no" is entered for each relevant measure. By identifying not yet, or only partially, implemented measures, improvement options for the security of the information technology in question are highlighted. The baseline security check gives information about measures, which are still missing (nominal vs. actual comparison). From this follows what remains to be done to achieve baseline protection through security. Not all measures suggested by this baseline check need to be implemented. Peculiarities are to be taken into account! It could be that several more or less unimportant applications are running on a server, which have lesser protection needs. In their totality, however, these applications are to be provided with a higher level of protection. This is called the (cumulation effect). The applications running on a server determine its need for protection. Several IT applications can run on an IT system. When this occurs, the application with the greatest need for protection determines the IT system’s protection category. Conversely, it is conceivable that an IT application with great protection needs does not automatically transfer this to the IT system. This may happen because the IT system is configured redundantly, or because only an inconsequential part is running on it. This is called the (distribution effect). This is the case, fo

    Read more →
  • IOS SDK

    IOS SDK

    The iOS SDK (iOS Software Development Kit), formerly the iPhone SDK, is a software development kit (SDK) developed by Apple Inc. The kit allows for the development of mobile apps on Apple's iOS 17 and iPadOS operating systems. The iOS SDK is a free download for users of Macintosh (or Mac) personal computers. It is not available for Microsoft Windows PCs. The SDK contains sets giving developers access to various functions and services of iOS devices, such as hardware and software attributes. It also contains an iPhone simulator to mimic the look and feel of the device on the computer while developing. New versions of the SDK accompany new versions of iOS. In order to test applications, get technical support, and distribute apps through App Store, developers are required to subscribe to the Apple Developer Program. Combined with Xcode, the iOS SDK helps developers write iOS apps using officially supported programming languages, including Swift and Objective-C. Other companies have also created tools that allow for the development of native iOS apps using their respective programming languages. == History == While originally developing iPhone prior to its unveiling in 2007, Apple's then-CEO Steve Jobs did not intend to let third-party developers build native apps for the iOS operating system, instead directing them to make web applications for the Safari web browser. However, backlash from developers prompted the company to reconsider, with Jobs announcing on October 17, 2007, that Apple would have a software development kit (SDK) available for developers by February 2008. The SDK was released on March 6, 2008. == Features == The iOS SDK is a free download for Mac users. It is not available for Microsoft Windows. To test the application, get technical support, and distribute applications through App Store, developers are required to subscribe to the Apple Developer Program. The SDK contents are separated into the following sets: UIKit Multi-touch events and controls Accelerometer support View hierarchy Localization (i18n) Camera support Media OpenAL audio mixing and recording Video playback Image file formats Quartz Core Animation OpenGL ES Core Services Networking Embedded SQLite database Core Location Threads CoreMotion Mac OS X Kernel TCP/IP Sockets Power management File system Security The SDK also contains an iPhone simulator, a program used to simulate the look and feel of iPhone on the developer's computer. New SDK versions accompany new iOS versions. == Programming languages == The iOS SDK, combined with Xcode, helps developers write iOS applications using officially supported programming languages, including Swift and Objective-C. An .ipa (iOS App Store Package) file is an iOS application archive file which stores an iOS app. === Java === In 2008, Sun Microsystems announced plans to release a Java Virtual Machine (JVM) for iOS, based on the Java Platform, Micro Edition version of Java. This would enable Java applications to run on iPhone and iPod Touch. Soon after the announcement, developers familiar with the SDK's terms of agreement believed that by not allowing third-party applications to run in the background (answer a phone call and still run the application, for example), and not allowing an application to download code from another source, nor allowing an application to interact with a third-party application, Sun's development efforts could be hindered without Apple's cooperation. Sun also worked with a third-party company called Innaworks in attempts to get Java on iPhone. Despite the apparent lack of interest from Apple, a firmware leak of the 2007 iPhone release revealed an ARM chip with a processor with Jazelle support for embedded Java execution. === .NET === Novell announced in September 2009 that they had successfully developed MonoTouch, a software framework that let developers write native iPhone applications in the C# and .NET programming languages, while still maintaining compatibility with Apple's requirements. === Flash === iOS does not support Adobe Flash, and although Adobe has two versions of its software: Flash and Flash Lite, Apple views neither as suitable for the iPhone, claiming that full Flash is "too slow to be useful", and Flash Lite to be "not capable of being used with the Web". In October 2009, Adobe announced that an upcoming update to its Creative Suite would feature a component to let developers build native iPhone apps using the company's Flash development tools. The software was officially released as part of the company's Creative Suite 5 collection of professional applications. === 2010 policy on development tools === In April 2010, Apple made controversial changes to its iPhone Developer Agreement, requiring developers to use only "approved" programming languages in order to publish apps on App Store, and banning applications that used third-party development tools; the ban affected Adobe's Packager tool, which converted Flash apps into iOS apps. After developer backlash and news of a potential anti-trust investigation, Apple again revised its agreement in September, allowing the use of third-party development tools. === Mac Catalyst === Originally called "Project Marzipan", Mac Catalyst helps developers bring iPadOS app experiences to macOS, and make it easier to take apps developed for iPadOS devices to Macs by avoiding the need to write the underlying software code twice.

    Read more →
  • Security.txt

    Security.txt

    security.txt is an accepted standard for website security information that allows security researchers to report security vulnerabilities easily. The standard prescribes a text file named security.txt in the well known location, similar in syntax to robots.txt but intended to be machine and human readable, for those wishing to contact a website's owner about security issues. security.txt files have been adopted by Google, GitHub, LinkedIn, and Facebook. == History == The Internet Draft was first submitted by Edwin Foudil in September 2017. At that time it covered four directives, "Contact", "Encryption", "Disclosure" and "Acknowledgement". Foudil expected to add further directives based on feedback. In addition, web security expert Scott Helme said he had seen positive feedback from the security community while use among the top 1 million websites was "as low as expected right now". In 2019, the Cybersecurity and Infrastructure Security Agency (CISA) published a draft binding operational directive that requires all US federal agencies to publish a security.txt file within 180 days. The Internet Engineering Steering Group (IESG) issued a Last Call for security.txt in December 2019 which ended on January 6, 2020. A study in 2021 found that over ten percent of top-100 websites published a security.txt file, with the percentage of sites publishing the file decreasing as more websites were considered. The study also noted a number of discrepancies between the standard and the content of the file. In April 2022 the security.txt file has been accepted by Internet Engineering Task Force (IETF) as RFC 9116. == File format == security.txt files can be served under the /.well-known/ directory (i.e. /.well-known/security.txt) or the top-level directory (i.e. /security.txt) of a website. The file must be served over HTTPS and in plaintext format.

    Read more →
  • Display list

    Display list

    A display list, also called a command list in Direct3D 12 and a command buffer in Vulkan, is a series of graphics commands or instructions that are run when the list is executed. Systems that make use of display list functionality are called retained mode systems, while systems that do not are as opposed to immediate mode systems. In OpenGL, display lists are useful to redraw the same geometry or apply a set of state changes multiple times. This benefit is also used with Direct3D 12's bundle command lists. In Direct3D 12 and Vulkan, display lists are regularly used for per-frame recording and execution. == Origins in vector displays == The vector monitors or calligraphic displays of the 1960s and 1970s used electron beam deflection to draw line segments, points, and sometimes curves directly on a CRT screen. Because the image would immediately fade, it needed to be redrawn many times a second (storage tube CRTs retained the image until blanked, but they were unsuitable for interactive graphics). To refresh the display, a dedicated CPU called a Display Processor or Display Processing Unit (DPU) was used, which had a memory buffer for a "display list", "display file", or "display program" containing line segment coordinates and other information. Advanced Display Processors also supported control flow instructions, which were useful for drawing repetitive graphics such as text, and some could perform coordinate transformations such as 3D projection. == Home computer display list functionality == One of the earliest systems with a true display list was the Atari 8-bit computers. The display list (actually called so in Atari terminology) is a series of instructions for ANTIC, the video co-processor used in these machines. This program, stored in the computer's memory and executed by ANTIC in real-time, can specify blank lines, any of six text modes and eight graphics modes, which sections of the screen can be horizontally or vertically fine-scrolled, and trigger Display List Interrupts (called raster interrupts or HBI on other systems). The Amstrad PCW family contains a Display List function called the 'Roller RAM'. This is a 512-byte RAM area consisting of 256 16-bit pointers in RAM, one for each line of the 720 × 256 pixel display. Each pointer identifies the location of 90 bytes of monochrome pixels that hold the line's 720 pixel states. The 90 bytes of 8 pixel states are spaced at 8-byte intervals, so there are 7 unused bytes between each byte of pixel data. This suits how the text-orientated PCW constructs a typical screen buffer in RAM, where the first character's 8 rows are stored in the first 8 bytes, the second character's rows in the next 8 bytes, and so on. The Roller RAM was implemented to speed up display scrolling as it would have been unacceptably slow for its 3.4 MHz Z80 to move up the 23 KB display buffer 'by hand' i.e. in software. The Roller RAM starting entry used at the beginning of a screen refresh is controlled by a Z80-writable I/O register. Therefore, the screen can be scrolled simply by changing this I/O register. Another system using a Display List-like feature in hardware is the Amiga, which, not coincidentally, was also designed by some of the same people who developed the custom hardware for the Atari 8-bit computers. Once directed to produce a display mode, it would continue to do so automatically for every following scan line. The computer also included a dedicated co-processor, called "Copper", which ran a simple program or 'Copper List' intended for modifying hardware registers in sync with the display. The Copper List instructions could direct the Copper to wait for the display to reach a specific position on the screen, and then change the contents of hardware registers. In effect, it was a processor dedicated to servicing raster interrupts. The Copper was used by Workbench to mix multiple display modes (multiple resolutions and color palettes on the monitor at the same time), and by numerous programs to create rainbow and gradient effects on the screen. The Amiga Copper was also capable of reconfiguring the sprite engine mid-frame, with only one scanline of delay. This allowed the Amiga to draw more than its 8 hardware sprites, so long as the additional sprites did not share scanlines (or the one scanline gap) with more than 7 other sprites. i.e., so long as at least one sprite had finished drawing, another sprite could be added below it on the screen. Additionally, the later 32-bit AGA chipset allowed the drawing of bigger sprites (more pixels per row) while retaining the same multiplexing. The Amiga also had dedicated block-shifter ("blitter") hardware, which could draw larger objects into a framebuffer. This was often used in place of, or in addition to, sprites. In more primitive systems, the results of a display list can be simulated, though at the cost of CPU-intensive writes to certain display modes, color control, or other visual effect registers in the video device, rather than a series of rendering commands executed by the device. Thus, one must create the displayed image using some other rendering process, either before or while the CPU-driven display generation executes. In many cases, the image is also modified or re-rendered between frames. The image is then displayed in various ways, depending on the exact way in which the CPU-driven display code is implemented. Examples of the results possible on these older machines requiring CPU-driven video include effects such as Commodore 64/128's FLI mode, or Rainbow Processing on the ZX Spectrum. == Usage in OpenGL == To delimit a display list, the glNewList and glEndList functions are used, and to execute the list, the glCallList function is used. Almost all rendering commands that occur between the function calls are stored in the display list. Commands that affect the client state are not stored in display lists. Display lists are named with an integer value, and creating a display list with the same name as one already created overrides the first. The glNewList function expects two arguments: an integer representing the name of the list, and an enumeration for the compilation mode. The two modes include GL_COMPILE_AND_EXECUTE, which compiles and immediately executes, and GL_COMPILE, which only compiles the list. Display lists enable the use of the retained mode rendering pattern, which is a system in which graphics commands are recorded (retained) to execute in succession at a later time. This is contrary to immediate mode, where graphics commands are immediately executed on client calls. == Usage in Direct3D 12 == Command lists are created using the ID3D12Device::CreateCommandList function. Command lists may be created in several types: direct, bundle, compute, copy, video decode, video process, and video encoding. Direct command lists specify that a command list the GPU can execute, and doesn't inherit any GPU state. Bundles, are best used for storing and executing small sets of commands any number of times. This is used differently than regular command lists, where commands stored in a command list are typically executed only once. Compute command lists are used for general computations, with a common use being calculating mipmaps. A copy command list is strictly for copying and the video decode and video process command lists are for video decoding and processing respectively. Upon creation, command lists are in the recording state. Command lists may be re-used by calling the ID3D12GraphicsCommandList::Reset function. After recording commands, the command list must be transitioned out of the recording state by calling ID3D12GraphicsCommandList::Close. The command list is then executed by calling ID3D12CommandQueue::ExecuteCommandLists.

    Read more →