AI Coding Nyt — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.
The following is a comparison of cloud-computing software and providers. == IaaS (Infrastructure as a service) == === Providers === ==== General ==== == SaaS (Software as a Service) == === General === === Supported hosts === === Supported guests === == PaaS (Platform as a service) == === Providers === === Providers on IaaS === PaaS providers which can run on IaaS providers ("itself" means the provider is both PaaS and IaaS):
Read more →
Texture compression is a specialized form of image compression designed for storing texture maps in 3D computer graphics rendering systems. Unlike conventional image compression algorithms, texture compression algorithms are optimized for random access. Texture compression can be applied to reduce memory usage at runtime. Texture data is often the largest source of memory usage in a mobile application. == Tradeoffs == In their seminal paper on texture compression, Beers, Agrawala and Chaddha list four features that tend to differentiate texture compression from other image compression techniques. These features are: Decoding Speed It is highly desirable to be able to render directly from the compressed texture data and so, in order not to impact rendering performance, decompression must be fast. Random Access Since predicting the order that a renderer accesses texels would be difficult, any texture compression scheme must allow fast random access to decompressed texture data. This tends to rule out many better-known image compression schemes such as JPEG or run-length encoding. Compression Rate and Visual Quality In a rendering system, lossy compression can be more tolerable than for other use cases. Some texture compression libraries, such as crunch, allow the developer to flexibly trade off compression rate vs. visual quality, using methods such as rate–distortion optimization (RDO). Encoding Speed Texture compression is more tolerant of asymmetric encoding/decoding rates as the encoding process is often done only once during the application authoring process. Given the above, most texture compression algorithms involve some form of fixed-rate lossy vector quantization of small fixed-size blocks of pixels into small fixed-size blocks of coding bits, sometimes with additional extra pre-processing and post-processing steps. Block Truncation Coding is a very simple example of this family of algorithms. Because their data access patterns are well-defined, texture decompression may be executed on-the-fly during rendering as part of the overall graphics pipeline, reducing overall bandwidth and storage needs throughout the graphics system. As well as texture maps, texture compression may also be used to encode other kinds of rendering map, including bump maps and surface normal maps. Texture compression may also be used together with other forms of map processing such as mipmaps and anisotropic filtering. == Availability == Some examples of practical texture compression systems are S3 Texture Compression (S3TC), PVRTC, Ericsson Texture Compression (ETC) and Adaptive Scalable Texture Compression (ASTC); these may be supported by special function units in modern graphics processing units (GPUs). OpenGL and OpenGL ES, as implemented on many video accelerator cards and mobile GPUs, can support multiple common kinds of texture compression - generally through the use of vendor extensions. == Supercompression == A compressed-texture can be further compressed in what is called "supercompression". Fixed-rate texture compression formats are optimized for random access and are much less efficient compared to image formats such as PNG. By adding further compression, a programmer can reduce the efficiency gap. The extra layer can be decompressed by the CPU so that the GPU receives a normal compressed texture, or in newer methods, decompressed by the GPU itself. Supercompression saves the same amount of VRAM as regular texture compression, but saves more disk space and download size. == Neural Texture Compression == Random-Access Neural Compression of Material Textures (Neural Texture Compression) is a Nvidia's technology which enables two additional levels of detail (16× more texels, so four times higher resolution) while maintaining similar storage requirements as traditional texture compression methods. The key idea is compressing multiple material textures and their mipmap chains together, and using a small neural network, that is optimized for each material, to decompress them.
Read more →
Simple interactive object extraction (SIOX) is an algorithm for extracting foreground objects from color images and videos with very little user interaction. It has been implemented as "foreground selection" tool in the GIMP (since version 2.3.3), as part of the tracer tool in Inkscape (since 0.44pre3), and as function in ImageJ and Fiji (plug-in). Experimental implementations were also reported for Blender and Krita. Although the algorithm was originally designed for videos, virtually all implementations use SIOX primarily for still image segmentation. In fact, it is often said to be the current de facto standard for this task in the open-source world. Initially, a free hand selection tool is used to specify the region of interest. It must contain all foreground objects to extract and as few background as possible. The pixels outside the region of interest form the sure background while the inner region define a superset of the foreground, i.e. the unknown region. A so-called foreground brush is then used to mark representative foreground regions. The algorithm outputs a selection mask. The selection can be refined by either adding further foreground markings or by adding background markings using the background brush. Technically, the algorithm performs the following steps: Create a set of representative colors for sure foreground and sure background, the so-called color signatures. Assign all image points to foreground or background by a weighted nearest neighbor search in the color signatures. Apply some standard image processing operations like erode, dilate, and blur to remove artifacts. Find the connected foreground components that are either large enough or marked by the user. For video segmentation the sure background and sure foreground regions are learned from motion statistics. SIOX also features tools that allow sub-pixel accurate refinement of edges and high texture areas, the so-called "detail refinement brushes". As with all segmentation algorithms, there are always pictures where the algorithm does not yield perfect results. The most critical drawback of SIOX is the color dependence. Although many photos are well-separable by color, the algorithm cannot deal with camouflage. If the foreground and background share many identical shades of similar colors, the algorithm might give a result with parts missing or incorrectly classified foreground. SIOX performs about equally well on different benchmarks compared to graph-based segmentation methods, such as Grabcut. SIOX is, however, more noise robust and can therefore also be used for the segmentation of videos. Graph-based segmentation methods search for a minimum cut and therefore tend to not perform optimally with complex structures. The algorithm has initially been developed at the department of computer science at Freie Universitaet Berlin. The main developer, Gerald Friedland, is now faculty at the EECS department of the University of California at Berkeley and also a Principal Data Scientist at Lawrence Livermore National Lab. He continues to support the development through mentoring, e.g. in the Google Summer of Code.
Read more →
The Computer Law & Security Review is an international peer-reviewed journal published by Elsevier. It has been published six times a year since 1985 and is indexed in Scopus and SSCI. It is accessible to a wide range of professional legal and IT practitioners, businesses, academics, researchers, libraries and organisations in both the public and private sectors. The journal regularly covers: CLSR Briefing with special emphasis on UK/US developments European Union update National news from 10 European jurisdictions Pacific rim news column Refereed practitioner and academic papers on topics such as Web 2.0, IT security, Identity management, ID cards, RFID, interference with privacy, Internet law, telecoms regulation, online broadcasting, intellectual property, software law, e-commerce, outsourcing, data protection and freedom of information and many other topics. The Journal's Correspondent Panel includes more than 40 specialists in IT law and security. Each issue contains articles, case law analysis and current news on information and communications technology. Special Features High quality peer reviewed papers from internationally renowned practitioner and academic experts Latest developments reported in situ by more than 20 leading law firms from around the world Highly experienced and respected editor and correspondents panel Online access to all 23 volumes of CLSR with embedded web links to primary sources Contact details of all authors A pool of expertise that can collectively identify the key topics that need to be examined.
Read more →
JotterPad is a text editor app for Android, developed by Two App Studio. It is proprietary software that uses the freemium pricing strategy. == Features == Jotterpad supports the markdown and fountain markup languages. Among its features are themes, synchronisation with Google Drive and Dropbox, dictionary and thesaurus, and snapshots. JotterPad uses a freemium pricing model, which means that a restricted version of the app is offered for free, while access to additional functionality requires payment. About half of the features are available in the free version. The synchronisation feature was originally limited to one account, and in Jotterpad 12 the option to synchronise using multiple accounts was added as a monthly subscription service.
Read more →
NRD Cyber Security is a Lithuanian company that provides cybersecurity solutions, consulting, and other services. The organization specializes in CSIRT and SOC creation, modernization and training. It has helped to establish national and sectorial CSIRTs around the world, including countries, such as Bangladesh, Egypt, Bhutan, Kosovo, Malawi and others. NRD Cyber Security was found in 2013 to provide quality cybersecurity services to nations and organizations. In 2018 it was included in The Deloitte Technology Fast 50 in Europe list. In 2024 it was awarded the #98 place in MSSP Alert Top 250 world's managed security service providers. The company is a member of various cybersecurity organizations, such as Forum of Incident Response and Security Teams (FIRST), The Global Forum on Cyber Expertise (GFCE), Unicrons Lt. It is a strategic partner of The Global Cyber Security Capacity Centre (GCSCC) at University of Oxford.
Read more →
Data classification is the process of organizing data into categories based on attributes like file type, content, or metadata. The data is then assigned class labels that describe a set of attributes for the corresponding data sets. The goal is to provide meaningful class attributes to former less structured information, enabling organizations to manage, protect, and govern their data more effectively. Data classification can be viewed as a multitude of labels that are used to define the type of data, especially on confidentiality and integrity issues. == Approaches == Classification techniques might be used for reports generated by ERP systems or where the data includes specific personal information that is identified. Many organizations also employ context-based classification that considers factors such as data source, user identity, and application context. == Regulatory frameworks == Data classification schemes are mandated or implied by numerous regulatory frameworks that require organizations to identify, categorize, and protect sensitive information according to its level of sensitivity. The Health Insurance Portability and Accountability Act (HIPAA) Security Rule requires covered entities to conduct an accurate and thorough assessment of potential risks and vulnerabilities to the confidentiality, integrity, and availability of protected health information under 45 CFR 164.308(a)(1)(ii)(A), which necessitates classification of data to distinguish protected health information from other organizational data."Security Standards: Administrative Safeguards". U.S. Department of Health and Human Services. Retrieved April 1, 2026. The December 2024 HIPAA Security Rule notice of proposed rulemaking (90 FR 898) would mandate comprehensive technology asset inventories and require mapping of how electronic protected health information moves through an organization, formalizing data classification as an explicit compliance obligation."HIPAA Security Rule To Strengthen the Cybersecurity of Electronic Protected Health Information". Federal Register. January 6, 2025. Retrieved April 1, 2026. NIST Special Publication 800-60 provides guidelines for mapping information types to security categories, establishing a structured methodology for federal agencies to classify data and apply appropriate security controls based on the potential impact of a security breach."NIST SP 800-60 Vol. 1 Rev. 1: Guide for Mapping Types of Information and Information Systems to Security Categories". National Institute of Standards and Technology. August 2008. Retrieved April 1, 2026.
Read more →
Variable-data publishing (VDP) (also known as database publishing) is a term referring to the output of a variable composition system. While these systems can produce both electronically viewable and hard-copy (print) output, the "variable-data publishing" term today often distinguishes output destined for electronic viewing, rather than that which is destined for hard-copy print (e.g. variable data printing). Essentially the same techniques are employed to perform variable-data publishing, as those utilized with variable data printing. The difference is in the interpretation for output. While variable-data printing may be interpreted to produce various print streams or page-description files (e.g. AFP/IPDS, PostScript, PCL), variable-data publishing produces electronically viewable files, most commonly seen in the forms of PDF, HTML, or XML. Variable-data composition involves the use of data to conditionally: exhibit text (static blocks and/or variable content) exhibit images select fonts select colors format page layouts & flows Variable-data may be as simple as an address block or salutation. However, it can be any or all of the document's textual content—including words, sentences, paragraphs, pages, or the entire document. In other words, it can make up as little or as much of the document as the composer desires. Variable data may also be used to exhibit various images, such as logos, products, or membership photos. Further, variable-data can be used to build rule-based design schemes, including fonts, colors, and page formats. The possibilities are vast. The variable-data tools available today, make it possible to perform variable-data composition at nearly every stage of document production. However, the level of control that can be achieved varies, based upon how far into the document production process a variable-data tool is deployed. For example, if variable-data insertion occurs just prior to output...it's not likely that the text flow or layout can be altered with nearly as much control as would be available at the time of initial document composition. Many organizations will produce multiple forms of output (aka: multi-channel output), for the same document. This ensures that the published content is available to recipients via any form of access method they might require. When multi-channel output is utilized, integrity between those output channels often becomes important. Variable-data publishing may be performed on everything from a personal computer to a mainframe system. However, the speed and practical output volumes which can be achieved are directly affected by the computer power utilized. == Origin of the concept == The term variable-data publishing was likely an offshoot of the term "variable-data printing", first introduced to the printing industry by Frank Romano, Professor Emeritus, School of Print Media, at the College of Imaging Arts and Sciences at Rochester Institute of Technology. However, the concept of merging static document elements and variable document elements predates the term and has seen various implementations ranging from simple desktop 'mail merge', to complex mainframe applications in the financial and banking industry. In the past, the term VDP has been most closely associated with digital printing machines. However, in the past 3 years the application of this technology has spread to web pages, emails, and mobile messaging.
Read more →
A smart object is an object that enhances the interaction with not only people but also with other smart objects. Also known as smart connected products or smart connected things (SCoT), they are products, assets and other things embedded with processors, sensors, software and connectivity that allow data to be exchanged between the product and its environment, manufacturer, operator/user, and other products and systems. Connectivity also enables some capabilities of the product to exist outside the physical device, in what is known as the product cloud. The data collected from these products can be then analysed to inform decision-making, enable operational efficiencies and continuously improve the performance of the product. It can not only refer to interaction with physical world objects but also to interaction with virtual (computing environment) objects. A smart physical object may be created either as an artifact or manufactured product or by embedding electronic tags such as RFID tags or sensors into non-smart physical objects. Smart virtual objects are created as software objects that are intrinsic when creating and operating a virtual or cyber world simulation or game. The concept of a smart object has several origins and uses, see History. There are also several overlapping terms, see also smart device, tangible object or tangible user interface and Thing as in the Internet of things. == History == In the early 1990s, Mark Weiser, from whom the term ubiquitous computing originated, referred to a vision "When almost every object either contains a computer or can have a tab attached to it, obtaining information will be trivial", Although Weiser did not specifically refer to an object as being smart, his early work did imply that smart physical objects are smart in the sense that they act as digital information sources. Hiroshi Ishii and Brygg Ullmer refer to tangible objects in terms of tangibles bits or tangible user interfaces that enable users to "grasp & manipulate" bits in the center of users' attention by coupling the bits with everyday physical objects and architectural surfaces. The smart object concept was introduced by Marcelo Kallman and Daniel Thalmann as an object that can describe its own possible interactions. The main focus here is to model interactions of smart virtual objects with virtual humans, agents, in virtual worlds. The opposite approach to smart objects is 'plain' objects that do not provide this information. The additional information provided by this concept enables far more general interaction schemes, and can greatly simplify the planner of an artificial intelligence agent. In contrast to smart virtual objects used in virtual worlds, Lev Manovich focuses on physical space filled with electronic and visual information. Here, "smart objects" are described as "objects connected to the Net; objects that can sense their users and display smart behaviour". More recently in the early 2010s, smart objects are being proposed as a key enabler for the vision of the Internet of things. The combination of the Internet and emerging technologies such as near field communications, real-time localization, and embedded sensors enables everyday objects to be transformed into smart objects that can understand and react to their environment. Such objects are building blocks for the Internet of things and enable novel computing applications. In 2018, one of the world's first smart houses was built in Klaukkala, Finland in the form of a five-floor apartment block, using the Kone Residential Flow solution created by KONE, allowing even a smartphone to act as a home key. == Characteristics == Although we can view interaction with physical smart object in the physical world as distinct from interaction with virtual smart objects in a virtual simulated world, these can be related. Poslad considers the progression of: how humans use models of smart objects situated in the physical world to enhance human to physical world interaction; versus how smart physical objects situated in the physical world can model human interaction in order to lessen the need for human to physical world interaction; versus how virtual smart objects by modelling both physical world objects and modelling humans as objects and their subsequent interactions can form a predominantly smart virtual object environment. === Smart physical objects === The concept smart for a smart physical object simply means that it is active, digital, networked, can operate to some extent autonomously, is reconfigurable and has local control of the resources it needs such as energy, data storage, etc. Note, a smart object does not necessarily need to be intelligent as in exhibiting a strong essence of artificial intelligence—although it can be designed to also be intelligent. Physical world smart objects can be described in terms of three properties: Awareness: is a smart object's ability to understand (that is, sense, interpret, and react to) events and human activities occurring in the physical world. Representation: refers to a smart object's application and programming model—in particular, programming abstractions. Interaction: denotes the object's ability to converse with the user in terms of input, output, control, and feedback. Based upon these properties, these have been classified into three types: Activity-Aware Smart Objects: Are objects that can record information about work activities and its own use. Policy-Aware Smart Objects: Are objects that are activity-aware Objects can interpret events and activities with respect to predefined organizational policies. Process-Aware Smart Objects: Processes play a fundamental role in industrial work management and operation. A process is a collection of related activities or tasks that are ordered according to their position in time and space. === Smart virtual objects === For the virtual object in a virtual world case, an object is called smart when it has the ability to describe its possible interactions. This focuses on constructing a virtual world using only virtual objects that contain their own interaction information. There are four basic elements to constructing such a smart virtual object framework. Object properties: physical properties and a text description Interaction information: position of handles, buttons, grips, and the like Object behavior: different behaviors based on state variables Agent behaviors: description of the behavior an agent should follow when using the object Some versions of smart objects also include animation information in the object information, but this is not considered to be an efficient approach, since this can make objects inappropriately oversized. === Categorization === The terms smart, connected product or smart product can be confusing as it is used to cover a broad range of different products, ranging from smart home appliances (e.g., smart bathroom scales or smart light bulbs) to smart cars (e.g., Tesla). While these products share certain similarities, they often differ substantially in their capabilities. Raff et al. developed a conceptual framework that distinguishes different smart products based on their capabilities, which features 4 types of smart product archetypes (in ascending order of "smartness"). Digital Connected Responsive Intelligent == Advantages == Smart, connected products have three primary components: Physical – made up of the product's mechanical and electrical parts. Smart – made up of sensors, microprocessors, data storage, controls, software, and an embedded operating system with enhanced user interface. Connectivity – made up of ports, antennae, and protocols enabling wired/wireless connections that serve two purposes, it allows data to be exchanged with the product and enables some functions of the product to exist outside the physical device. Each component expands the capabilities of one another resulting in "a virtuous cycle of value improvement". First, the smart components of a product amplify the value and capabilities of the physical components. Then, connectivity amplifies the value and capabilities of the smart components. These improvements include: Monitoring of the product's conditions, its external environment, and its operations and usage. Control of various product functions to better respond to changes in its environment, as well as to personalize the user experience. Optimization of the product's overall operations based on actual performance data, and reduction of downtimes through predictive maintenance and remote service. Autonomous product operation, including learning from their environment, adapting to users' preferences and self-diagnosing and service. === The Internet of things (IoT) === The Internet of things is the network of physical objects that contain embedded technology to communicate and sense or interact with their internal states or the external environment. The phrase "Internet of things" reflects the gro
Read more →
Scanimate is an analog computer animation (video synthesizer) system created by Lee Harrison III of Denver, Colorado. Harrison had developed its predecessor, ANIMAC, which generated used a motion capture system, based on a body suit with potentiometers. In contrast, Scanimate included TV technology. Scanimate's successor was called Caesar, and used a digital computer to control the analog system. The eight Scanimate systems were used to produce much of the video-based animation seen on television between most of the 1970s and early 1980s in commercials, promotions, and show openings. One of the major advantages the Scanimate system had over film-based animation and computer animation was the ability to create animations in real time. The speed with which animation could be produced on the system because of this, as well as its range of possible effects, helped it to supersede film-based animation techniques for television graphics. By the mid-1980s, it was superseded by digital computer animation, which produced sharper images and more sophisticated 3D imagery. Animations created on Scanimate and similar analog computer animation systems have a number of characteristic features that distinguish them from film-based animation: the motion is extremely fluid, using all 60 fields per second (in NTSC format video) or 50 fields (in PAL format video) rather than the 24 frames per second that film uses; the colors are much brighter and more saturated; and the images have a very "electronic" look that results from the direct manipulation of video signals through which the Scanimate produces the images. == How it works == A special high-resolution (around 945 lines) monochrome camera records high-contrast artwork. The image is then displayed on a high-resolution screen. Unlike a normal monitor, its deflection signals are passed through a special analog computer that enables the operator to bend the image in a variety of ways. The image is then shot from the screen by either a film camera or a video camera. In the case of a video camera, this signal is then fed into a colorizer, a device that takes certain shades of grey and turns it into color as well as transparency. The idea behind this is that the output of the Scanimate itself is always monochrome. Another advantage of the colorizer is that it gives the operator the ability to continuously add layers of graphics. This makes possible the creation of very complex graphics. This is done by using two video recorders. The background is played by one recorder and then recorded by another one. This process is repeated for every layer. This requires very high-quality video recorders (such as both the Ampex VR-2000 or IVC's IVC-9000 of Scanimate's era, the IVC-9000 being used quite frequently for Scanimate composition due to its very high generational quality between re-recordings). == Current usage == Two of the Scanimates are still in use at ZFx studios in Asheville, North Carolina. The original "Black Swan" R&D machine has been updated with more modern power supplies and can produce material in standard or 1080P high definition video. The "white Pearl" machine is the last one produced and is being kept in its original configuration for historical purposes by David Sieg at ZFx inc. The machines are installed in a working production environment with Grass Valley switchers, Kaleidoscope digital video effects systems, and Accom digital disk recorders for layering. == Use in television, music and films == === Music videos === Let's Groove by Earth, Wind & Fire Get Down on It by Kool & the Gang Blame It on the Boogie by The Jacksons Knock on Wood by Amii Stewart Popcorn Love by New Edition === TV programs/movies === === TV channels/home video/TV productions ===
Read more →
Truth discovery (also known as truth finding) is the process of choosing the actual true value for a data item when different data sources provide conflicting information on it. Several algorithms have been proposed to tackle this problem, ranging from simple methods like majority voting to more complex ones able to estimate the trustworthiness of data sources. Truth discovery problems can be divided into two sub-classes: single-truth and multi-truth. In the first case only one true value is allowed for a data item (e.g birthday of a person, capital city of a country). While in the second case multiple true values are allowed (e.g. cast of a movie, authors of a book). Typically, truth discovery is the last step of a data integration pipeline, when the schemas of different data sources have been unified and the records referring to the same data item have been detected. == General principles == The abundance of data available on the web makes more and more probable to find that different sources provide (partially or completely) different values for the same data item. This, together with the fact that we are increasing our reliance on data to derive important decisions, motivates the need of developing good truth discovery algorithms. Many currently available methods rely on a voting strategy to define the true value of a data item. Nevertheless, recent studies, have shown that, if we rely only on majority voting, we could get wrong results even in 30% of the data items. The solution to this problem is to assess the trustworthiness of the sources and give more importance to votes coming from trusted sources. Ideally, supervised learning techniques could be exploited to assign a reliability score to sources after hand-crafted labeling of the provided values; unfortunately, this is not feasible since the number of needed labeled examples should be proportional to the number of sources, and in many applications the number of sources can be prohibitive. == Single-truth vs multi-truth discovery == Single-truth and multi-truth discovery are two very different problems. Single-truth discovery is characterized by the following properties: only one true value is allowed for each data item; different values provided for a given data item oppose to each other; values and sources can either be correct or erroneous. While in the multi-truth case the following properties hold: the truth is composed by a set of values; different values could provide a partial truth; claiming one value for a given data item does not imply opposing to all the other values; the number of true values for each data item is not known a priori. Multi-truth discovery has unique features that make the problem more complex and should be taken into consideration when developing truth-discovery solutions. The examples below point out the main differences of the two methods. Knowing that in both examples the truth is provided by source 1, in the single truth case (first table) we can say that sources 2 and 3 oppose to the truth and as a result provide wrong values. On the other hand, in the second case (second table), sources 2 and 3 are neither correct nor erroneous, they instead provide a subset of the true values and at the same time they do not oppose the truth. == Source trustworthiness == The vast majority of truth discovery methods are based on a voting approach: each source votes for a value of a certain data item and, at the end, the value with the highest vote is select as the true one. In the more sophisticated methods, votes do not have the same weight for all the data sources, more importance is indeed given to votes coming from trusted sources. Source trustworthiness usually is not known a priori but estimated with an iterative approach. At each step of the truth discovery algorithm the trustworthiness score of each data source is refined, improving the assessment of the true values that in turn leads to a better estimation of the trustworthiness of the sources. This process usually ends when all the values reach a convergence state. Source trustworthiness can be based on different metrics, such as accuracy of provided values, copying values from other sources and domain coverage. Detecting copying behaviors is very important, in fact, copy allows to spread false values easily making truth discovery very hard, since many sources would vote for the wrong values. Usually systems decrease the weight of votes associated to copied values or even don’t count them at all. == Single-truth methods == Most of the currently available truth discovery methods have been designed to work well only in the single-truth case. Below are reported some of the characteristics of the most relevant typologies of single-truth methods and how different systems model source trustworthiness. === Majority voting === Majority voting is the simplest method, the most popular value is selected as the true one. Majority voting is commonly used as a baseline when assessing the performances of more complex methods. === Web-link based === These methods estimate source trustworthiness exploiting a similar technique to the one used to measure authority of web pages based on web links. The vote assigned to a value is computed as the sum of the trustworthiness of the sources that provide that particular value, while the trustworthiness of a source is computed as the sum of the votes assigned to the values that the source provides. === Information-retrieval based === These methods estimate source trustworthiness using similarity measures typically used in information retrieval. Source trustworthiness is computed as the cosine similarity (or other similarity measures) between the set of values provided by the source and the set of values considered true (either selected in a probabilistic way or obtained from a ground truth). === Bayesian based === These methods use Bayesian inference to define the probability of a value being true conditioned on the values provided by all the sources. P ( v ∣ ψ ( o ) ) = P ( ψ ( o ) ∣ v ) ⋅ P ( v ) P ( ψ ( o ) ) {\displaystyle P(v\mid \psi (o))={\frac {P(\psi (o)\mid v)\cdot P(v)}{P(\psi (o))}}} where v {\displaystyle \textstyle v} is a value provided for a data item o {\displaystyle \textstyle o} and ψ ( o ) {\displaystyle \textstyle \psi (o)} is the set of the observed values provided by all the sources for that specific data item. The trustworthiness of a source is then computed based on the accuracy of the values that provides. Other more complex methods exploit Bayesian inference to detect copying behaviors and use these insights to better assess source trustworthiness. == Multi-truth methods == Due to its complexity, less attention has been devoted to the study of the multi-truth discovery Below are reported two typologies of multi-truth methods and their characteristics. === Bayesian based === These methods use Bayesian inference to define the probability of a group of values being true conditioned on the values provided by all the data sources. In this case, since there could be multiple true values for each data item, and sources can provide multiple values for a single data item, it is not possible to consider values individually. An alternative is to consider mappings and relations between set of provided values and sources providing them. The trustworthiness of a source is then computed based on the accuracy of the values that provides. More sophisticated methods also consider domain coverage and copying behaviors to better estimate source trustworthiness. === Probabilistic Graphical Models based === These methods use probabilistic graphical models to automatically define the set of true values of given data item and also to assess source quality without need of any supervision. == Applications == Many real-world applications can benefit from the use of truth discovery algorithms. Typical domains of application include: healthcare, crowd/social sensing, crowdsourcing aggregation, information extraction and knowledge base construction. Truth discovery algorithms could be also used to revolutionize the way in which web pages are ranked in search engines, going from current methods based on link analysis like PageRank, to procedures that rank web pages based on the accuracy of the information they provide.
Read more →
DigitaltMuseum (lit. 'The Digital Museum') is a website database in Norwegian and Swedish for art, images and cultural history museums. The service was established in 2009 after a trial period. The database is developed and operated by KulturIT. KulturIT ANS was established by the Norwegian Museum of Cultural History and Maihaugen in consultation with the Norwegian Archive, Library and Museum Authority (ABM) in 2007. In 2015, the company underwent a corporate transformation and KulturIT AS was established on 12 February. The website has per 2025 around 2,548,022 images. Many of the images are in the public domain or under Creative Commons licenses and are being imported into Wikimedia Commons. The website's API was developed in 2012. == Institutions == As of 2025, there are 223 collaborating museums. == Mission == DigitaltMuseum aims to make the museums' collections accessible to all interested parties, regardless of time and place. The website aims to facilitate easy use of the collections through various methods including image searches, research, teaching and joint knowledge development. DigitaltMuseum contains collections from several hundred Norwegian and Swedish museums, totalling around five million objects. The website contains both historical images from the areas and themes covered by the museums, as well as images of artefacts from the collections. Parts of the collection have previously only been shown in the museums' exhibitions and books and have therefore rarely or never been shown to the public.
Read more →
Non-human (also spelled nonhuman) is any entity displaying some, but not enough, human characteristics to be considered a human. The term has been used in a variety of contexts and may refer to objects that have been developed with human intelligence, such as robots or vehicles. == Organisms == === Animal rights and personhood === In the animal rights movement, it is common to distinguish between "human animals" and "non-human animals". Participants in the animal rights movement generally recognize that non-human animals have some similar characteristics to those of human persons. For example, various non-human animals have been shown to register pain, compassion, memory, and some cognitive function. Some animal rights activists argue that the similarities between human and non-human animals justify giving non-human animals rights that human society has afforded to humans, such as the right to self-preservation, and some even wish for all non-human animals or at least those that bear a fully thinking and conscious mind, such as vertebrates and some invertebrates such as cephalopods, to be given a full right of personhood. === The non-human in philosophy === Contemporary philosophers have drawn on the work of Henri Bergson, Gilles Deleuze, Félix Guattari, and Claude Lévi-Strauss (among others) to suggest that the non-human poses epistemological and ontological problems for humanist and post-humanist ethics, and have linked the study of non-humans to materialist and ethological approaches to the study of society and culture. == Software and robots == The term non-human has been used to describe computer programs and robot-like devices that display some human-like characteristics. In both science fiction and in the real world, computer programs and robots have been built to perform tasks that require human-computer interactions in a manner that suggests sentience and compassion. There is increasing interest in the use of robots in nursing homes and to provide elder care. Computer programs have been used for years in schools to provide one-on-one education with children. The Tamagotchi toy required children to provide care, attention, and nourishment to keep it "alive".
Read more →
KE Software is a formerly Australian-owned computer software company based in Manchester, United Kingdom, which specialises in collection management programs for museums, galleries and archives. The Axiell Group acquired the firm in 2014. == History == KE Software had its origins in investigations into electronic systems for managing natural science collections conducted in the late 1970s under a joint program of the University of Melbourne, the then National Museum of Victoria and the Australian Museum, which led to the development of the Titan Database in 1984. Much of the credit for the development of the project was due to the work of Martin Hallett of the Museum of Victoria which evolved into Textpress, and by 2000, the KE EMu database program. KE Software was bought by Axiell in 2014 and the team merged with the Axiell staff. Axiell continues to sell and support EMu. == Products == The firm has two main products: the Ke EMu Electronic Museum management system, a collections management system for museums; and Vitalware Vital Records Management System. The first version of Ke EMu was launched in 1997 and uses the Texpress database engine with client/server architecture on a Windows or Unix/Linux server. Ke Emu is consistent with the Dublin Core / Darwin Core standards for archive and museum catalogue metadata. "The company’s clients include the three largest museums in the world.: == KE EMu == KE EMu is considered one of the more effective and purpose-designed museum cataloguing programs. particularly in the creation of public interfaces to museum catalogue data. KE EMu was further developed in 1997 as a multilingual platform, which has been utilised in bilingual institutions such as the Canadian Museum of Civilisation. Subsequently this evolved into Texpress and KE EMu (standing for Electronic MUseum) in 2000, which is "now used across the world in natural science museums with huge collections'". KE EMu is used by a large number of museums and galleries around the world, including the Smithsonian Anthropological Collection, American Museum of Natural HistoryVancouver Art Gallery, New York Botanical Garden, the University of Chicago Research Archives, the University of Pennsylvania Museum in Philadelphia, the National Museum of Australia, the Australian Museum, Museum of Victoria, University of Melbourne Archives, and the Alexander Turnbull Library, National Library of New Zealand. There are over 300 clients, and more than 5000 users of the EMu software worldwide. The program has been described as providing "...comprehensive museum management (collection management plus other administrative needs for a museum), workflow and project management, flexible metadata, various stats and metrics, and comprehensive web interface with support for mobile devices and kiosks" == KE Vitalware == The firm's vitalware software is used by a number of governments and commercial organisations for managing and accessing large data sets, such as the birth records of the Trinidad and Tobago Registrar General, the Government of Anguilla, Ministry for Infrastructure, Communications, Utility and Housing, and the Mississippi Department of Information Technology Services. == Further development == A specialist tracking component for KE EMu has been developed by Forbes Hawkins of Museum Victoria. This enables locations to be barcoded, and data to be updated as items are moved around the stores, or between venues, display, laboratories and other locations. This system has been considered by Museums around the world. The company has been working with Australian government agencies to digitize birth deaths and marriage registers in order to cross match identity data. The program has also been used for managing the Australian Plant Disease Database and the Australian Plant Pest Database as the program "...has several features that have proven to be invaluable for a plant disease database".
Read more →
IPUMS, originally the Integrated Public Use Microdata Series, is the world's largest individual-level population database. IPUMS consists of microdata samples from United States (IPUMS-USA) and international (IPUMS-International) census records, as well as data from U.S. and international surveys. The records are converted into a consistent format and made available to researchers through a web-based data dissemination and analysis system. IPUMS is housed at the Institute for Social Research and Data Innovation (ISRDI), an interdisciplinary research center at the University of Minnesota, under the direction of Professor Steven Ruggles. == Description == IPUMS includes all persons enumerated in the United States censuses from 1850 to 1950 (though, the 1890 census is missing because it was destroyed in a fire) and from the American Community Survey since 2000 and the Current Population Survey since 1962. IPUMS includes household-level data for United States Censuses from 1790 to 1840, due to the first six censuses only including the name of the head of household, with tallied household totals following. IPUMS provides consistent variable names, coding schemes, and documentation across all the samples, facilitating the analysis of long-term change. IPUMS-International includes countries from Africa, Asia, Europe, and Latin America for 1960 forward. The database currently includes more than a billion individuals enumerated in 365 censuses from 94 countries around the world. IPUMS-International converts census microdata for multiple countries into a consistent format, allowing for comparisons across countries and time periods. Special efforts are made to simplify use of the data while losing no meaningful information. Comprehensive documentation is provided in a coherent form to facilitate comparative analyses of social and economic change. Additional databases in the IPUMS family include the: North Atlantic Population Project (NAPP) IPUMS National Historical Geographic Information System (NHGIS) IPUMS Health Surveys IPUMS Global Health IPUMS Time Use The Journal of American History described the effort as "One of the great archival projects of the past two decades." Liens Socio, the French portal for the social sciences, gave IPUMS the only “best site” designation that has gone to any non-French website, writing “IPUMS est un projet absolument extraordinaire...époustouflante [mind-blowing]!” The official motto of IPUMS is "use it for good, never for evil." All public IPUMS data and documentation are available online free of charge.
Read more →